WIRELESS NOISE CANCELING STEREO HEADPHONES WITH MIC
INSTRUCTION MANUAL
Thank you for purchasing the RichardSolo Wireless Noise Canceling Stereo Headphones with Mic. Please read these
instructions before operation and save for future reference.
1
8
2
9
3
10
4
5
6
7
1
Multifuction/Turn on/Pairing mode/Play/
Pause/Turn off/Answer call/End Call
2
LED Indicator
3
Volume Up/Next/Recent Call/
Transfer Call
4
Volume Down/Previous/Mute Call
8
ANC LED Indicator
5
Micro USB Slot
9
ANC Turn On/Off
6
Mic
10
ANC Mic
7
3.5mm Audio Jack
Package includes:
Features:
• W ireless Noise Canceling Stereo
• Bluetooth 4.0+EDR (Enhanced Rate Data)
• Built-in mic with smartphone controls for phone calls
• Apt-X audio technology — wireless audio with
• Connects with 2 phones / devices simultaneously
Headphones with Mic
• 1 USB / microUSB charge cable
®
CD-like quality
• View headphone battery power status on iOS devices
• 1 3.5 mm audio cable
• ANC function — active noise reduction
• User Manual
• Listen wirelessly or wired via 3.5 mm audio cable
(included)
LED Functions:
Button Functions:
Operation LED Status
Power on Blue LED flashes 2 times
Power on:
Press/hold multifunction button 2 seconds - Blue LED flashes (2x) Heaphones turn on
Power off Red LED flashes 2 times
Pairing Red LED & Blue LED flash alternately
Standby Blue LED flashes 3 times in 5 seconds
Incoming call
Blue LED flashes continuously
Low battery
Red LED flashes 2 times every 2 seconds
Charging
Red LED illuminates while charging
Blue LED illuminates when charging fininished
Power off:
Press/hold multifunction button 3 seconds - Red LED flashes (2x) Headphones turn off
Volume:
Tap Volume Up / Volume Down buttons - Volume increases/decreases
WIRELESS NOISE CANCELING STEREO HEADPHONES WITH MIC
Continue
INSTRUCTION MANUAL
Music Playback:
Phone Calls:
Play/Pause:
Tap multifunction button - Music pauses Tap again Music continues
Answer Call:
Tap multifunction button - Answer incoming call
Reject Call:
Press/hold Volume Up button 2 seconds Reject call
End Call:
Tap multifunction button - End phone call
Last Number Redial:
In standby mode, press/release multifunction
button 2 times - Redial last number
Previous Track:
In standby mode, press/hold Volume Down
button 2 seconds - Play previous track
Next Track:
In standby mode, press/hold Volume Up
button 2 seconds – Play next track
Transfer Call:
During phone conversations, press/hold Volume
Up button 2 seconds - Call switches to mobile
phone. Press/hold Volume Up button
2 seconds - Call switches to headphones
Call Mute Function:
Press Volume Down button 2 seconds - Call mutes.
Press Volume Down button 2 seconds - Call mute
cancels
Battery Capacity
Status (iOS Devices)
Active Noise
Reduction (ANC)*
several times. When battery is low, red LED flashes 2 times every
When connected to iOS devices
To reduce surrounding noise, Switch
2 seconds. Connect USB/micro-USB charge cable (included) to
(iPhone/iPod/iPad) – Remaining
ANC toggle to “ON” position - blue
any powered USB port and charge headphones approximately 2
headphone battery capacity
ANC LED illuminates - Switch “Off” to
hours. Red LED illuminates while recharging, blue LED illuminates
shows on the upper right corner
cancel Active Noise Reduction.
when fully charged. In storage, fully charge headphones every 6
of connected iOS device.
Charging:
New headphones have enough power for pairing and dialing out
months to keep battery cells healthy.
Wired Connections
Specifications
3.5mm audio cable (included) connects headphones to
headphone port on device.
Bluetooth version:4.0
Talk time:
14 hours
Wired Connection Headphones Powered On:
Active Noise Reduction (ANC) functions - Headphone
controls do not function Adjust volume, switch tracks,
etc. via controls on smart phone or music player
Standby time:
540 hours
Musicplay time: 14 hours
Wireless range: 33 feet (10 m)
Bluetooth profiles: A2DP/AVRCP/HSP/HFP
Wired Connection Headphones Powered Off:
Audio functions - ANC/control does not function Adjust
volume, switch tracks, etc. via controls on smart phone
or music player
Impedance: 32 Ω
* Headphones must be powered onPhone call function cannot be used in
this mode.
AptX® Audio
Technology
Headphones connect
wirelessly to any Apt-X®
enabled device. Apt-X®
improves Bluetooth
streaming & delivers
CD-like quality audio.
Sound pressure level: 110±3dB
Frequency Response: 20 Hz - 20 KHz
Weight: 9 oz (255 g)
Dimensions:
7.9 x 7.1 x 2.6 inches
(200 x 180 x 65 mm
Bluetooth Pairing
Pair with one device or two devices simultaneously
One Device
1 Make sure headphones are powered off
3
After pairing second device, power off headphones
4
P
ower on again headphones automatically connect with last
connected device
2 Press/hold multifunction button 5 seconds for pairing mode Red/Blue LEDs flash
3 Activate phone/device’s Bluetooth function – search/select F5A on device list
4 If device requires PIN #, enter code 0000
5 Headphones connect – control music/dial phone via headphone/device
Two Devices
5
T
ap two buttons ( Volume + / Volume ) together for multipoint
connect mode
6
Search/select F5A from list of found devices on other unit
7
If device requires PIN #, enter code 0000
8
Headphones are now connected with both devices
1 After pairing with first device, power off headphones
2 Follow identical pairing procedure for second device
Questions? Please email us at: RichardSoloHelp@gmail.com
2301 Kerner Blvd. Suite C, San Rafael, CA 94901 USA
www.RichardSolo.com