1092 DTS CAT 1 PART GAZ (GB) (Page 44)

advertisement
XFP Range
Tubular fluorescent fitting
with automatic switch off
n
n
n
n
n
Product characteristics
TYPICAL
APPLICATIONS
t t t
n
Refineries
Petrochem/chemical
Painting/solvent areas
Automatic switch off on opening
Two body choices:
- polycarbonate (lightness and shock resistance)
- glass (hostile environments)
Fast connection (EExe junction box)
Very low maintenance cost (standard components)
Total anti-corrosion and marine protection
n
n
n
n
n
n
Marine grade aluminium alloy construction
Yellow polyurethane paint
Polycarbonate or glass tube
White painted sliding metal gear tray for G13 or G11 PL compact lamps
(depending on version)
Standard power supply 230V 50Hz (other versions – see options)
One M20 nickel chromed brass cable gland
Set of 2 articulated brackets
CERTIFICATION STANDARD: CENELEC EN 50014, 50018, 50019
ECTYPE EXAMINATION CERTIFICATE:under the new directive 94/9/EC
of 23/03/94: LCIE 02 ATEX 6171X
II 2G and D, IP66 T80°C for D
EExde IIC T6 (polycarbonate tube)
EExde IIC T6 ou EExde IIB T6 (glass tube, according to version)
Ingress protection: IP66/67
Shock resistance: IK09 10 Joules (polycarbonate tube)
Glow wire test: 960°C
Please note
In solvent and spray painting
areas, it is recommended to use
glass tubes
44
Z.I. - Avenue Henri Beaudelet B.P. 27 - 77831 Ozoir Cedex - France - Tel. +33 (0)1 64 40 27 26 - Fax +33 (0)1 64 40 20 11
Zone 1
+ zone 2
EEx “d”
Flameproof
Technical specifications
Enclosure
Cable entry
End caps and cover in marine grade aluminium alloy type
AS10GY30
Yellow polyurethane paint RAL 1003
Offshore version: 3 coats of paint
Extruded 2.5mm LEXAN polycarbonate tube, anti-UV
protected
7mm borosilicate glass tube
Ingress rating: IP66/67 (EN60529), neoprene gasket
Stainless steel screws
Standard: One M20 nickel chromed brass cable gland
with fixing flange – Ø 8-13mm
Option: M20 metallic cable gland for armoured cable
type PEP (see page 123)
Up to 6mm2 (rigid wire), 4mm2 (flexible wire)
Standard:Terminals supplied for L, N, PE; looping not
possible
Temperature
Lamps (supplied on request)
Ambient temperature range: -20°C to +55°C
Surface temperature classification:T6 (gas),T80°C (dust)
T8 bi-pin G13 tubes, Ø 26 white industry
4000°K (other colour temperatures on demand)
G11 compact fluorescent PL lamp
Terminal block
Protection class: I
Photometric
data
Fixing
Automatic switch off on opening
Standard: 2 chromed zinc articulated brackets (type
DO23) for ceiling mounting
Options: 2 stainless steel brackets 304L (type DO24)
for ceiling mounting
2 U-bolts and brackets in chromed zinc 304L for pole
mounting 1”1/4 (type DO25), 1”1/2 (type DO26),
2” (type DO27)
2 U-bolts and brackets in stainless steel 304L for pole
mounting 1”1/4 (type DO28), 1”1/2 (type DO29),
2” (type DO30)
Rated voltages
Standard: ferromagnetic ballast – 230V 50Hz
Options: ferromagnetic ballast – 240V 50Hz –
110V 50Hz – 220V 60Hz – 127V 60Hz – 110V 60Hz
Single / dual tube electronic ballast:
AC 220 to 240V, 50-60Hz
DC 220 - 240V
Power factor
0.75 with ferromagnetic ballast (with capacitor,
except 20W: 0.60)
0.98 with electronic ballast
For 1000 lm, with 1 lamp
Further options (if required)
Stainless steel canopy 304L
Stainless steel shockproof kit 304L (factory fitted)
Installation and maintenance instruction leaflet NT 12 available on request
For 1000 lm, with 2 lamps
Reference
Rating
(in W)
Nominal
current (in A)
Dimensions (in mm)
A B
XFP120
XFP140
XFP165
XFP220
XFP240
XFP265
XFP136
XFP155
XFP236
XFP255
1 x 18
1 x 36
1 x 58
2 x 18
2 x 36
2 x 58
1 x PL 36
1 x PL 55
2 x PL 36
2 x PL 55
0.15
0.20
0.35
0.30
0.40
0.70
0.20
0.30
0.40
0.60
780 x 565
1385 x 1170
1690 x 1475
780 x 565
1385 x 1170
1690 x 1475
780 x 585
780 x 585
780 x 585
780 x 585
Weight (in kg)
polycarbonate
glass
5.5
9
11
6.5
10
12
6
6
6.5
6.5
Classification zone(1)
polycarbonate
glass
7.5
17
17
8.5
18
20
8
8
8.5
8.5
IIC T6
IIC T6
IIC T6
IIC T6
IIC T6
IIC T6
IIC T6
IIC T6
IIC T6
IIC T6
* For glass tube version, add V to the reference (eg.: XFP 240 V)
(1) For immediate opening (no waiting period), temperature classification becomes T3
* T5 in 240VAC
Spare parts
Fixing accessories
U-bolt for pole
mounting
D001P
D002
D003
D004
D005
D006
Sealed polycarbonate
tube for XFP**
Cover
Gasket
Slide for gear tray
Sliding gear tray*
Connector
IIC T6
IIB T6
IIB T6
IIC T6
IIB T6
IIB T6
IIC T6
IIC T6*
IIC T6
IIC T6*
D007
D008
D009
D010
D010PL
D011
D017
Starter socket
Starter
Ballast*
Lamp holder
G11 Lampholder for PL
Chain
Box gasket
* Specify rating plus voltage ** Use index V for glass tube
D018
D019
D020
D021
D022
Box cover
Screw for box cover
Terminal block
Switch
Interlock
Bracket
D023/D024
Dimensions
Ø 165
45
Download