LATCHING AUXILIARY
RELAYS
This document may be subject to changes. Contact
ARTECHE to confirm the characteristics and availability
of the products described here.
Moving together
INDEX
4.
›› Answers for any application 5.
›› General characteristics
6.
›› Technical standards
7.
›› Range of products
9.
›› General purpose latching relays
10.
›› Trip and lockout relays I
11.
›› Trip and lockout relays II
12.
›› Latching relays with coil overvoltage
13.
›› Breaking capacity
18.
›› Pick-up voltage/release voltage-temperature
.
protection
charts
20.
›› Model selection
22.
›› Dimensions and panel mounting cut-off Auxiliary Relays | Latching
3
ANSWERS FOR ANY
APPLICATION
ARTECHE latching relays are relays with 2 stable positions for the output contacts. Depending
on which coil is energized, the output contacts will change from one position to another. The
design of Arteche relay allows to have no consumption in permanence.
ARTECHE latching relays range is designed to guarantee the best features and complete
security even in the hardest working environment.
The design, durability and quality of the different alternatives that ARTECHE latching relays
can offer (FF range and standard range), make them suitable for high responsibility controls in
different areas, highlighting:
ELECTRICAL UTILITIES:
Power plants, electrical substations.
›› Position monitoring of circuit breaker and sectionalizer
›› Direct operation on MV / HV (circuit breaker, sectionalizer)
›› Position memory:
- manual / automatic
- local / remote
›› Galvanic
isolation between the control system and the
primary equipment
›› Applications where high speed operation is a must
›› Applications where high breaking capacity is required
›› Tripping and lockout functions
›› Low duty loads control, activate digital inputs. FF range
RAILWAY SECTOR:
Electrification, signalling, interlocking and rolling stock.
›› Boarding doors locking
›› Brake circuit command
›› Lighting and air conditioned systems operation
›› Traction system
›› Low duty loads control, activate digital inputs. FF range
INDUSTRIAL SECTOR:
Continuous process industries (Petrochemical, concrete, iron
industries), water treatment, ...
›› Critical process surveillance
›› Position monitoring circuit breaker and sectionalizer
›› Galvanic isolation between the control and the
systems
power
›› Low duty loads control, activate digital inputs. FF range
›› Activation of security sistems in industrial processes:
The great power of the output contacts
makes possible direct action on HV and MV
switchgear, because their making/breaking
capacities, continuous through-current and
overvoltage capacity guarantee perfect
insulation.
- bloking electrical machines
4
Auxiliary Relays | Latching
GENERAL
CHARACTERISTICS
The main features of ARTECHE’s latching auxiliary relays
are the followings:
›› Designed
to allow continuous operation
even in high temperature ambient, within
the whole voltage range.
›› No consumption in permanence.
›› Self-cleaning contacts.
›› High level of electrical insulation
input and output circuits.
between
›› Availability
of extended voltage range
(+25/-30%) for high security applications.
›› Capable
to operate under low duty loads,
activate digital inputs, and operate without
any load. FF Range.
›› High speed operation (up to 10 ms).
›› Capable to withstand vibrations and seismic
conditions.
›› Sturdy design.
›› Front state indication on the nameplatte.
›› High protection degree (IP40), with
transparent cover, making them suitable for
use in salty and tropical atmospheres.
›› In
compliance with the most demanding
test standards: IEC, EN, IEEE and bearing
the CE mark.
›› Wide range of auxiliary voltage levels (Vdc
and Vac).
›› Simplicity
of installation (plug-in relays
in a wide range of sockets with different
installation configurations).
›› Capable
to work under ambients with
relative humidity around 100%.
›› No need of maintenance after installation.
Large variety of assemblies with frontal and rear connection sockets
by screw or fast-on clip.
Auxiliary Relays | Latching
5
TECHNICAL STANDARDS
GENERAL STANDARDS
In addition to the specific applicable standards, ARTECHE latching
relays are designed based on the fulfilment of the following
standards:
›› IEC 61810: Electromechanical all-or-nothing relays.
›› IEC 60255: Electrical relays. Measuring relays
and protection
equipment.
›› IEC 61812: Specified time relays for industrial use.
›› IEC 60947: Low-voltage switchgear and controlgear.
›› IEC 61000: Electromagnetic compatibility.
RAILWAY APPLICABLE STANDARDS
›› EN 60077 Series. Rolling stock equipment.
- Part 1: General conditions in service and general terms.
- Part 2: Electrotechnical components.
›› EN
50155 (IEC 60571 equivalent). Railway applications - Rolling
stock equipment.
E322124
UL Recognized Component Marks for USA and
Canada: The combined UL signs for the USA and
Canada are recognized by the authorities of both
countries. All auxiliary relays identified with this mark
meet the requirements of both countries.
6
Auxiliary Relays | Latching
RANGE OF PRODUCTS
General purpose latching relays
The bistable ARTECHE relays with 2 stable positions. These
positions are held by a permanent magnet, which prevents
intermediate positions, giving a huge security operation.
The position change is made with 2 sets of coils with
separate entrances in BF3 and BJ8 and with breaking-flame
contacts for each set of coils.
Their pick-up time lower than 20 ms and the high breaking
capacity of their contacts make them appropriate to be
used as an interface between the protection system and the
breaker. The main application for these relays is multiply the
output contacts in those controls that need to memorize 2
stables positions:
- automatic / manual
- close / open
Auxiliary trip and lockout relays
ARTECHE offers specific relays intended to be used in
tripping and lockout applications, where high quality
requirement in operating time (with models that assure
the trip ever in less than 10 ms) and breaking capacity are
needed.
Front indication on the nameplate, that indicates if the relay
has changed the contact position.
All the relays include a diode in parallel with the coil (see
bistable relays with overvoltage protection characteristic).
There is also the possibility of a bistable trip and lockout
relay with manual reset.
Latching relays with coil overvoltage
protection
ARTECHE’s auxiliary relays, either Vdc or Vac, have the
possibility of including an element in parallel with the coil
(diode or varistance).
These elements aim to prevent the over voltage peak
generated by the coil itself and it may affect other equipment
installed on the same line.
Auxiliary Relays | Latching
7
TECHNICAL FEATURES
PER MODEL
››World-class range of
auxiliary relays for
energy sector, specially
designed for the most
demanding applications
8
Auxiliary Relays | Latching
GENERAL PURPOSE LATCHING RELAYS
Model
BF-3
BF-4
BJ-8
BI-16
Relays with two stable positions. Required when the position memory
(open-close, automatic-manual, local-remote...) is needed.
Applications
Construction characteristics
Contacts no.
3 Changeover
4 Changeover
8 Changeover
16 Changeover
10
1
11
Connections
Trip
II
+
14
10
1
I
Reset
+
2
3
11
3
Trip
II
7
12
4
2
-
8
13
5
I
Reset
9
2
7
Trip
II
+
b
a
12
+
B1
+
1
4
8
13
5
c
9
I
Reset
14
6
11
20
10
+
d
21
30
3
41
50
5
51
61
30
3
31
40
4
41
50
5
51
71
80
8
Options
Weight (g)
Dimensions (mm)
Options are not available
81
Trip
II
+
b
a
c
I
Reset
+
d
3
4
41
50
5
51
60
6
61
61
70
7
71
80
8
31
40
70
7
21
30
60
6
70
7
20
2
21
60
6
B Terminals
10
1
11
20
2
31
40
4
A Terminals
10
1
11
71
80
8
81
300
600
1400
45 x 45 x 96,5 (F large Type)
90 x 50 x 100,5
(J large Type)
120 x 110 x 105
81
Coil characteristics
Standard voltages(1)
24, 48, 72, 110, 125, 220 Vdc / 63,5, 110, 127, 230 Vac (50-60 Hz)
24, 48, 72, 110, 125, 220
Vcc/Vca (50/60 Hz)
+25% -30% UN
+10% -20% Un
Voltage range
Pick-up voltage
Average consumptions only in the
change-over
See pick-up voltage / temperature curves for Latching relays
6W
12 W
24 W
Operating time
Pick-up time
<20 ms
Contacts
Contact material
Distance between contacts
Permanent current
Instantaneous current
Max. making capacity
Breaking capacity
Max. breaking capacity
Umax opened contact
AgNi
1,8 mm
10 A
80 A during 200 ms / 200 A during 10 ms
80 A during 200 ms /
150 A during 10 ms
40 A / 0,5 s / 110 Vdc
See breaking capacity curves (Contact configuration)
See value for 50.000 operations
250 Vdc / 400 Vac
Performance data
Mechanical endurance
107 operations
Operating temperature
-40ºC +70ºC
Storage temperature
-40ºC +85ºC
Max. operating humidity
93% / +40ºC
Operating altitude(2)
(1)
(2)
<2000 m
Other voltage upon request
Ask for higher altitudes
Auxiliary Relays | Latching
9
TRIP AND LOCKOUT RELAYS (I)
Model
BF-3R
Applications
BF-4R
BJ-8R
BI-16R*
Intended for trip and lockout applications where high demanding requirements in operating
time and breaking capacity are needed.
Construction characteristics
8 Changeover
16 Changeover
10
A Terminals
11
1
20
12
5
4
2
-
8
13
9
1
7
8
13
5
-
4
+
2
=
3
Trip
11
+
B1
12
-
-
Reset
7
=
3
10
Trip
11
Reset
+
14
Reset
=
Connections
Trip
2
9
b
+
6
2
3
d
+
5
4
50
5
60
c
-
10
61
6
Options
Options are not available
Weight (g)
Dimensions (mm)
51
61
70
7
71
80
8
41
60
70
7
31
50
51
6
2
40
41
b
+
8
21
30
3
31
40
a
-
4
d
+
5
41
50
51
60
c
-
6
7
71
61
70
80
81
11
20
21
30
31
40
4
10
1
11
20
30
a
-
14
+
1
21
3
B Terminals
10
=
1
Trip
4 Changeover
-
3 Changeover
Reset
Contacts no.
71
80
8
81
300
600
1250
45 x 45 x 96,5 (F large Type)
90 x 50 x 100,5
(J large Type)
120 x 110 x 105
81
Coil characteristics
Standard voltages(1)
24, 48, 72, 110, 125, 220 Vdc / 63,5, 110, 127, 230 Vac (50-60 Hz)
Voltage range
+10% -20% UN
Pick-up voltage
Average consumptions only in
the change-over
See pick-up voltage / temperature curves for Latching relays
17 W
17 W
30 W
90 W
Operating time
Pick-up time
<10 ms (Vdc) <20 ms (Vac)
Contacts
Contact material
AgNi
Distance between contacts
1,8 mm
Permanent current
Instantaneous current
Max. making capacity
Breaking capacity
Max. breaking capacity
Umax opened contact
10 A
80 A during 200 ms / 200 A during 10 ms
40 A / 0,5 s / 110 Vdc
See breaking capacity curves (Contact configuration)
See value for 50.000 operations
250 Vdc / 400 Vac
Performance data
Mechanical endurance
107 operations
106 operations
Operating temperature
-40ºC +70ºC
Storage temperature
-40ºC +85ºC
Max. operating humidity
93% / +40ºC
Operating altitude(2)
<2000 m
Other voltage upon request
Ask for higher altitudes
* UL in progress
(1)
(2)
10
Auxiliary Relays | Latching
TRIP AND LOCKOUT RELAYS (II)
Model
Applications
BF-4RP
BJ-8RP
BI-16RP*
Intended for tripping and locking applications where high quality requirements in operating time and breaking capacity are
needed, with manual reset.
Construction characteristics
8 Changeover
16 Changeover
10
A Terminals
3
7
=
12
4
2
-
9
Reset
-
Reset
-
6
4
a
-
14
+
1
31
3
10
41
5
d
+
5
Dimensions (mm)
51
6
6
61
70
7
71
8
81
Options are not available
60
d
+
c
-
61
31
40
4
41
50
5
6
51
7
71
61
70
80
8
21
30
3
60
70
7
b
+
a
-
41
50
60
80
Weight (g)
40
4
51
2
31
11
20
21
30
50
c
-
Options
2
40
8
13
5
3
10
1
11
20
21
30
b
+
1
=
11
+
B1
Trip
=
Connections
Trip
20
2
B Terminals
10
11
Trip
1
-
4 Changeover
Reset
Contacts no.
71
80
8
81
81
300
600
1400
45 x 45 x 96,5
(F large Type)
90 x 50 x 100,5
(J large Type)
(A) 120 x (B) 110 x (C) 105
Coil characteristics
Standard voltages(1)
24, 48, 72, 110, 125, 220 Vdc
63,5, 110, 127, 230 Vac (50-60 Hz)
110, 125, 220 Vcc
Voltage range
+10% -20% UN
Pick-up voltage (20ºC)
Average consumptions only in
the change-over
See pick-up voltage / temperature curves for Latching relays
17 W
30 W
90W
<10 ms (Vdc) <13 ms (Vac)
<10 ms (Vdc) <20 ms (Vac)
<10 ms
Operating time
Pick-up time
Contacts
Contact material
AgNi
Distance between contacts
1,8 mm
Permanent current
10 A
Instantaneous current
80 A during 200 ms / 200 A during 10 ms
Max. making capacity
Breaking capacity
40 A / 0,5 s / 110 Vdc
See breaking capacity curves (Contact configuration)
Max. breaking capacity
See value for 50.000 operations
Umax opened contact
250 Vdc / 400 Vac
Performance data
Mechanical endurance
Operating temperature
107 operations
106 operations
-40ºC +70ºC
Storage temperature
-40ºC +85ºC
Max. operating humidity
93% / +40ºC
Operating altitude(2)
<2000 m
Other voltage upon request
Ask for higher altitudes
* UL in progress
(1)
(2)
Auxiliary Relays | Latching
11
LATCHING RELAYS WITH COIL
OVERVOLTAGE PROTECTION
Model
BF-3BB
BF-4BB
BJ-8BB
BI-16BB*
Intended to protect the contact of the equipment that feeds the coil in our relay.
Applications
Construction characteristics
8 Changeover
1
11
20
8
13
9
=
=
7
5
8
9
14
6
31
a
-
4
d
+
5
41
51
60
10
6
c
-
61
70
71
80
Weight (g)
Dimensions (mm)
8
Options are not available
B Terminals
10
1
11
20
2
20
2
21
30
3
31
40
4
50
7
Options
A Terminals
10
1
11
40
13
+
1
3
12
4
2
-
Trip
3
21
30
b
+
-
4
5
1
-
7
12
+
B1
-
3
10
2
+
Trip
11
11
Reset
14
+
Reset
=
-
Reset
Connections
Trip
2
16 Changeover
=
10
Trip
4 Changeover
41
5
51
60
6
71
3
d
+
4
8
31
5
51
60
6
c
-
41
50
61
70
7
80
81
21
30
40
61
70
7
b
+
a
-
50
-
3 Changeover
Reset
Contacts no.
71
80
8
81
300
600
1400
45 x 45 x 96,5 (F large Type)
90 x 50 x 100,5
(J large Type)
120 x 110 x 105
81
Coil characteristics
Standard voltages(1)
24, 48, 72, 110, 125, 220 Vdc(3)
24, 48, 72, 110, 125, 220
Vcc/Vca (50/60 Hz)
+25% -30% UN
+10% -20% Un
Voltage range
Pick-up voltage
Average consumptions only in the
change-over
See pick-up voltage / temperature curves for Latching relays
6W
12 W
24 W
Operating time
Pick-up time
<20 ms
Contacts
Contact material
Distance between contacts
Permanent current
Instantaneous current
Max. making capacity
Breaking capacity
Max. breaking capacity
Umax opened contact
AgNi
1,8 mm
10 A
80 A during 200 ms / 200 A during 10 ms
80 A during 200 ms /
150 A during 10 ms
40 A / 0,5 s / 110 Vdc
See breaking capacity curves (Contact configuration)
See value for 50.000 operations
250 Vdc / 400 Vac
Performance data
Mechanical endurance
107 operations
Operating temperature
-40ºC +70ºC
Storage temperature
-40ºC +85ºC
Max. operating humidity
93% / +40ºC
Operating altitude(2)
<2000 m
Other voltage upon request
(2)
Ask for higher altitudes
(3)
Vac voltages upon request
* UL in progress
(1)
12
Auxiliary Relays | Latching
BREAKING CAPACITY
››With devices operating
worldwide, also heavy
industries like oil &
gas sector trust in our
relays.
Auxiliary Relays | Latching
13
BREAKING CAPACITY
The breaking capacity is a critical parameter on the design and the
applications of the relays. Its mechanical life could be considerably
reduced, depending on the value of the load (especially with heavy duty
loads), the number of operations and the environmental conditions in
which the relay is operating.
In any configuration, ARTECHE’s auxiliary relays have a high breaking
capacity values. These limits are showed in the table below, in terms
of power and current values. In all the cases, these relays guarantee a
right performance during 50,000 operations.
Likewise, the values showed in the following charts have been obtained
in standard conditions in the laboratory, and they could be different
in real conditions. In any case, the possibility of connecting serial
contacts or a bigger distance between contacts makes these values to
be considerably increased.
24 Vdc voltage
Different loads configurations.
Resistive load:
Highly inductive load:
›› L/R= 0 ms.
›› L/R= 40 ms.
106
1000000
1000000
106
100000
105
100000
105
No. operations
10000000
107
No. operations
107
10000000
104
10000
0
0,00
5,00
5
10
10,00
15,00
15
20,00
20
Current
10000
104
25,00
25
0
0,00
2
2,00
4
4,00
6
6,00
8
8,00
10
10,00
12
12,00
Current
1 contact
0 ms
20 ms
40 ms
Vdc
Contact configuration
P(W)
I(A)
P(W)
I(A)
P(W)
I(A)
24
1 contact
500
20,83
370
15,42
250
10,42
(*) Ask for data and curve of serial contacts
14
Auxiliary Relays | Latching
110 Vdc voltage
Different loads configurations.
Resistive load:
Highly inductive load:
›› L/R= 0 ms.
›› L/R= 40 ms.
106
1000000
1000000
106
100000
105
105
100000
104
10000
0
0,00
No. operations
107
10000000
No. operations
10000000
107
1
1,00
2
2,00
3
3,00
4
4,00
5
5,00
6
6,00
7
7,00
8
8,00
9
9,00
10
10,00
104
10000
0
0,00
1
1,00
2
2,00
3
3,00
Current
4
4,00
5
5,00
6
6,00
7
7,00
Current
1 contact
2 contacts
0 ms
Vdc
110
Auxiliary Relays | Latching
20 ms
40 ms
Contact configuration
P(W)
I(A)
P(W)
I(A)
P(W)
I(A)
1 contact
170
1,55
140
1,27
90
0,82
2 contacts
1,360
12,36
1,106
10,05
730
6,63
15
220 Vdc voltage
Different loads configurations.
Resistive load:
Highly inductive load:
›› L/R= 0 ms.
›› L/R= 40 ms.
1000000
106
1000000
106
100000
105
100000
105
10000
104
0,00
0,00
No. operations
10000000
107
No. operations
10000000
107
0,20
0,20
0,40
0,40
0,60
0,60
0,80
0,80
1,00
1,00
1,20
1,20
1,40
1,40
1,60
1,60
10000
104
0,00
0,00
0,10
0,10
0,20
0,20
0,30
0,30
Current
0,40
0,40
0,50
0,50
0,60
0,60
0,70
0,70
0,80
0,80
Current
1 contact
2 contacts
0 ms
Vdc
220
16
20 ms
40 ms
Contact configuration
P(W)
I(A)
P(W)
I(A)
P(W)
I(A)
1 contact
150
0,68
115
0,52
66
0,30
2 contacts
319
1,45
234
1,06
134
0,61
Auxiliary Relays | Latching
HOW TO SELECT THE CURVE
OF MY RELAY
These charts show the breaking capacity values, either for
resistive and highly inductive loads, in three voltage values of
reference (ask for other voltage values). The charts show two
different curves:
›› 1 contact: Breaking capacity of the relays with distance between contacts = 1.8 mm.
›› 2 contacts: Breaking capacity for relays with serial contacts,
and distance between contacts=1.8 mm.
The distance between contacts is shown in the tables of
technical data.
HOW THE BREAKING CAPACITY
CAN BE INCREASED
ARTECHE’s auxiliary relays are power relays, designed
specially to have a high breaking capacity. Thus, there are
applications where the loads are so high that it is necessary to
even increase the breaking capacity, keeping the reliability of
the contacts of the auxiliary relays.
Thus, ARTECHE relays have the following alternatives and
recommendations:
›› Possibility
of external connection of equipment (serial
contacts) getting an important increase of breaking
capacity in these equipment is shown, guaranteeing the
right performance during a high number of operations.
Auxiliary Relays | Latching
17
PICK-UP VOLTAGE/RELEASE
VOLTAGE-TEMPERATURE
CHARTS
18
Auxiliary Relays | Latching
Variability of operative voltage range against temperature for the latching auxiliary relays.
General purpose latching relays and relays with coil overvoltage protection.
GENERAL PURPOSE RELAYS
Operative range against ambient temperature.
Maximum storage temperature
250
U/UN (%)
200
Upper limit of the pick-up voltage
150
Pick-up voltage limit
100
Operative range of the coil voltage
50
0
-40
-30 -20
-10
0
10
20
30
40
50
60
70
80
90
100 110 120
130
Temperature (ºC)
TRIP AND LOCKOUT RELAYS AND TRIP AND
LOCKOUT RELAY WITH PUSH TO RESET BUTTON
Operative range against ambient temperature.
Maximum storage temperature
250
200
Upper limit of the pick-up voltage
U/UN (%)
150
Pick-up voltage limit
Operative range of the coil voltage
100
50
0
-40 -30 -20
-10
0
10
20
30
40
50
60
70
80
90
100
110 120 130
Temperature (ºC)
Auxiliary Relays | Latching
19
MODELS SELECTION
Latching
Type
Range
Range
FF*
Aux. Supply
Vdc or Vac.
Model Selection
General purpose range
3 contacts relay
BF-3
4 contacts relay
BF-4
8 contacts relay
BJ-8
16 contacts relay
BI-16
Options
Diode in parallel with the coil
(only Vdc)
BB
Fast acting trip and lock out
relay (electrical reset only)
R
Fast acting trip and lock out
relay (electrical and manual
reset)**
RP
Range FF
Rolling stock applications or
low duty loads***
No
-
Yes
FF
Aux. Supply
Vdc or Vac
Indicate voltage level and if it
is VDC or VAC
(ex: 24 VDC)
* Indicate just if FF range is required.
** Unavailable for 3 contacts.
*** For more information refer to railway application brochure.
DIMENSIONS OF THE
RELAYS
Type F
Type J
F large
J large
45
115
105
10
100,5
10,5
110
50
10,5
96,5
20
120
96
90
45
Relay
Dimensions
Type I
Auxiliary Relays | Latching
Arteche has more than
100 customer service
technical points, an expert
engineers network close to
you everywhere
RETAINING CLIPS
RETAINING CLIPS
OP SOCKET
E0
Universal (D and F sized sockets
require 2 units ; J sized sockets
require 4 units)
RELATED PLUGGED RELAY
Universal (Bag
of 20 units)
RD; RF; RJ;
TDF; TDJ
Universal (Bag
of 100 units)
E41
DN-DE IP, DN-DE 2C IP
RD OP
E50
DN-TR OP, DN-TR 2C OP
RD OP
E40
FN-DE IP, FN-DE 2C IP
RF OP
E43
FN-DE IP, FN-DE 2C IP
TDF OP
E42
FN-TR OP, FN-TR 2C OP
RF OP
E44
FN-TR OP, FN-TR 2C OP
TDF OP
E31
FN-DE IP, FN-DE 2C IP
BF
E21
FN-TR OP, FN-TR 2C OP
BF
E45
JN-DE IP, JN-DE 2C IP
RJ OP
E47
JN-DE IP, JN-DE 2C IP
TDJ OP
E46
JN-TR OP, JN-TR 2C OP
RJ OP
E48
JN-TR OP, JN-TR 2C OP
TDJ OP
E29
JN-DE IP, JN-DE 2C IP
BJ; UJ
E27
JN-TR OP, JN-TR 2C OP
BJ; UJ
›› E0 retaining clips
OTHER ACCESSORIES
Security pins for RD; RF; RJ; TDF; TDJ relays (bag of 100 units)
›› E** retaining clips
SOCKETS, DIMENSIONS AND
CUT-OUT
Sockets
Options
Relay
BF
BJ
BI
Type
Screw
Faston
Weight (g)
IP10 Front connection
FN-DE IP10
FN-DE2C IP10
110
IP20 Front connection
FN-DE IP20
FN-DE2C IP20
110
IP10 Rear connection
FN-TR OP
FN-TR2C OP
90
IP10 Flush mounting
F-EMP OP
IP10 Front connection
JN-DE IP10
JN-DE2C IP10
225
IP20 Front connection
JN-DE IP20
JN-DE2C IP20
225
IP10 Rear connection
JN-TR OP
JN-TR2C OP
IP10 Flush mounting
J-EMP OP
IP10 Front connection
I-DE
IP10 Rear connection
I-TR
IP10 Flush mounting
I-EMP
300
Accessories
Retaining clips
Function signs on the
extraction ring
180
400
1000
I-TR2C
500
500
Front connection for double
faston IP10 sockets
DN-DE2C IP10
FN-DE2C IP10
JN-DE2C IP10
lateral connection for the
rest of the sockets
›› Front connection socket
22
›› Rear connection socket
›› Flush mounting socket
Auxiliary Relays | Latching
Relays type F
Relays type J
Relays type I
I-DE IP10
44
43
155
29
29
32,3
48
Sockets
for DIN
rail
154
105
64
105
64
84
83
32,3
88
(1) (2)
31
29
31
29
112
112
82,7
79,8
Fix Drilling
12
45
117
4d
60
3,5
=
FN-TR OP IP10 FN-TR2C OP IP10
84
80
6
41,8
51,2
Sockets
for rear
connection
JN-TR OP IP10 JN-TR2C OP IP10
43
6
3,5
2 of
I-TR, I-TR2C IP10
120
43
51,2
44
40
=
40,5 +- 0,2
108
84
42
42
80,5 +- 0,2
fø
8o
IP10
F
41
6
110
2 of
104
90
= 52,6 =
=
41,8
=
5
145
Fix Drilling
20
IP10
5
Cut-out
Fix Drilling
eø
112 min.
42,7
39,8
122 min.
I-EMP IP10
80
80
75
120
Sockets
for flush
mounting
124
124
15
12,5
8
15
12,5
8
Cut out
Cut out
90 min
125
66
57
(1)
DIN rail according to EN50022
Auxiliary Relays | Latching
(2)
4,5
90 min
106
96
125
Cut out
80 min
DIN46277/3
4,5
90 min
4,5
R2
Cut-out
66
57
61
50
66
57
106
96
Minimum distance between sockets will depend on type of relay and
sockets. Please request sockets user manual for more detailed information.
23
Updates: ARTECHE_CT_LATCHING-RELAYS_EN
Version: E3
www.arteche.com
©Arteche