AZ8462 - Zettler Electronics

advertisement
AZ8462
MICROMINIATURE
POLARIZED RELAY
FEATURES
• SMT and DIP mounting available
• Microminiature size: up to 50% less board area than
previous generation telecom relays
• High dielectric and surge voltage:
2.5 kV surge (per Bellcore TA-NWT-001089)
1.5 kV surge (per FCC Part 68)
1,000 Vrms, open contacts
2,000 Vrms, coil to contacts
• Monostable and bistable (latching) versions available
• Minimum switching load 10 mV, 10 µA
• Low power consumption: 79 mW pickup
• Stable contact resistance for low level signal switching
• Epoxy sealed
• UL, CUR file E43203
CONTACTS
GENERAL DATA
Life Expectancy
Mechanical
Minimum operations
1 x 108
5 x 105 at 1 A 30 VDC, resistive
1 x 105 at 2 A 30 VDC, resistive
1 x 105 at 0.5 A 120 VAC, resistive
Electrical
Operate Time (max.)
4 ms at nominal coil voltage
Arrangement
DPDT (2 Form C)
Bifurcated crossbar contacts
Release Time (max.)
4 ms at nominal coil voltage
(with no coil suppression)
Ratings
Resistive load:
Dielectric Strength
(at sea level for 1 min.)
2000 Vrms coil to contact
1500 Vrms between contact sets
1000 Vrms between open contacts
Max. switched power: 60 W or 62.5 VA
Max. switched current: 2 A
Max. switched voltage: 220 VDC* or 250 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Rated Load
UL
3 A at 30 VDC, resistive, 85°C, 100k cycles
2 A at 30 VDC resistive, 105°C, 100k cycles *
0.3 A at 110 VDC, resistive, 85°C, 100k cycles
0.5 A at 125 VAC, general use, 85°C
Surge Voltage
Coil to contacts
Open contacts
2500 V (at 2/10 µs)
1500 V (at 10/160 µs)
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
At nominal coil voltage
-40°C (-40°F) to 105°C (221°F)
Vibration
3.3 mm DA at 10–55 Hz
* not approved for 48 VDC coil or latching versions.
Shock
75 g operating, 100 g damage
Material
Silver nickel gold plated
Enclosure
P.B.T. polyester
Resistance
< 50 milliohms initially
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
see soldering profile
Max. Solder Time
see soldering profile
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
2.3 grams
Packing unit in pcs
40 per plastic tube
400 per reel
COIL
Power
At Pickup Voltage
(typical)
Monostable: 79 mW (1.5 - 24 VDC coil)
Monostable: 152 mW (48 VDC coil)
Bistable latching (single coil): 57 mW
Bistable latching (dual coil): 114 mW
Max. Continuous
Dissipation
0.39 W at 20°C (68°F) ambient
Temperature Rise
(at nominal voltage)
25°C (45°F) at nominal coil voltage
Temperature
Max. 155°C (311°F) Class F
NOTES
1.
2.
3.
4.
All values at 20°C (68°F)
Relay may pull in with less than “Must Operate” value.
Relay has fixed coil polarity.
Specifications subject to change without notice.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-26
AZ8462
RELAY ORDERING DATA
SINGLE COIL
COIL SPECIFICATIONS
Nominal Coil
VDC
Must Operate
VDC
ORDER NUMBER*
Max. Continuous
VDC
Coil Resistance
Ohm ± 10
THT
SMT
1.5
1.13
2.2
16
AZ8462-1.5
AZ8462S-1.5
3
2.25
4.5
64.3
AZ8462-3
AZ8462S-3
4.5
3.38
6.7
145
AZ8462-4.5
AZ8462S-4.5
5
3.75
7.5
178
AZ8462-5
AZ8462S-5
6
4.5
9.0
257
AZ8462-6
AZ8462S-6
9
6.75
13.5
579
AZ8462-9
AZ8462S-9
12
9.0
18.0
1,028
AZ8462-12
AZ8462S-12
24
18.0
36.0
4,114
AZ8462-24
AZ8462S-24
48
36.0
57.6
8,533
AZ8462-48
AZ8462S-48
SINGLE COIL LATCHING
COIL SPECIFICATIONS
Nominal Coil
VDC
Set/Reset
VDC
Max. Continuous
VDC
ORDER NUMBER*
Coil Resistance
Ohm ± 10
THT
SMT
1.5
1.13
2.7
22.5
AZ8462P1-1.5
AZ8462P1S-1.5
3
2.25
5.4
90
AZ8462P1-3
AZ8462P1S-3
4.5
3.38
8.1
203
AZ8462P1-4.5
AZ8462P1S-4.5
5
3.75
9.0
250
AZ8462P1-5
AZ8462P1S-5
6
4.5
10.8
360
AZ8462P1-6
AZ8462P1S-6
9
6.75
16.2
810
AZ8462P1-9
AZ8462P1S-9
12
9.0
21.6
1,440
AZ8462P1-12
AZ8462P1S-12
24
18.0
43.2
5,760
AZ8462P1-24
AZ8462P1S-24
DUAL COIL LATCHING
COIL SPECIFICATIONS
Nominal Coil
VDC
Set/Reset
VDC
Max. Continuous
VDC
ORDER NUMBER*
Coil Resistance
Ohm ± 10
THT
SMT
1.5
1.13
2.2
11.2
AZ8462P2-1.5
AZ8462P2S-1.5
3
2.25
4.5
45
AZ8462P2-3
AZ8462P2S-3
4.5
3.38
6.7
101
AZ8462P2-4.5
AZ8462P2S-4.5
5
3.75
7.5
125
AZ8462P2-5
AZ8462P2S-5
6
4.5
9.0
180
AZ8462P2-6
AZ8462P2S-6
9
6.75
13.5
405
AZ8462P2-9
AZ8462P2S-9
12
9.0
18.0
720
AZ8462P2-12
AZ8462P2S-12
24
18.0
36.0
2,880
AZ8462P2-24
AZ8462P2S-24
* Add suffix “1” after “S” for SMT short terminals (available for SMT version only).
Add suffix “TR” at the end of order number for Tape and Reel packing (available for SMT version only).
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-26
AZ8462
MECHANICAL DATA
Outline Dimensions(DIP type)
Viewed Toward Terminals
SINGLE SIDE STABLE
& 1 COIL LATCHING
.598MAX
[15.20]
2 COIL LATCHING
.303MAX
[7.70]
.362MAX
[9.20]
.024
[0.60]
PC Board Layout (DIP type)
.598MAX
[15.20]
.303MAX
[7.70]
.200
[5.08]
.100 .100
[2.54] [2.54]
.362MAX
[9.20]
.024
[0.60]
.130
[3.30]
.045
[1.15]
.200
[5.08]
.130
[3.30]
8-Ø0.039
[Ø1.00]
.045
[1.15]
SINGLE SIDE STABLE
& 1 COIL LATCHING
.100
.200
[5.08] [2.54]
.200 .100
[5.08] [2.54]
.200 .100 .100 .100
[5.08] [2.54] [2.54] [2.54]
.200
[5.08]
.200
[5.08]
.200
[5.08]
Outline Dimensions(SMT Type )
SINGLE SIDE STABLE
& 1 COIL LATCHING
.598MAX
[15.20]
2 COIL LATCHING
PC Board Layout (SMT type)
.598MAX
[15.20]
.303MAX
[7.70]
.303MAX
[7.70]
.039
[1.00]
.362MAX
[9.20]
.024
[0.60]
.045
[1.15]
.362MAX
[9.20]
.382MAX
[9.70]
.024
[0.60]
.045
[1.15]
.200
[5.08]
.374MAX
[9.50]
.020
[0.50]
.200 .100
[5.08] [2.54]
10-Ø0.039
[Ø1.00]
2 COIL LATCHING
.382MAX
[9.70]
.200
[5.08]
.100 .100
[2.54] [2.54]
.122
[3.11]
.283
[7.19]
.200
[5.08]
.374MAX
[9.50]
.200 .100
[5.08] [2.54]
SINGLE SIDE STABLE
& 1 COIL LATCHING
.039
[1.00]
.200
[5.08]
.100 .100 .100
[2.54] [2.54] [2.54]
0.122
[3.11]
.283
[7.19]
Outline Dimensions(S1 type: Short SMT)
SINGLE SIDE STABLE
& 1 COIL LATCHING
.598MAX
[15.20]
2 COIL LATCHING
.598MAX
[15.20]
.303MAX
[7.70]
2 COIL LATCHING
.303MAX
[7.70]
PC Board Layout (Type S : Short SMT)
.362MAX
[9.20]
.024
[0.60]
.045
[1.15]
.020
[0.50]
.200 .100
[5.08] [2.54]
.362MAX
[9.20]
.382MAX
[9.70]
.024
[0.60]
.045
[1.15]
.200
[5.08]
.295MAX
[7.50]
.382MAX
[9.70]
.200
[5.08]
.295MAX
[7.50]
.200 .100
[5.08] [2.54]
.039
[1.00]
.247
[6.29]
Wiring Diagram
12
SINGLE SIDE STABLE
& 1 COIL LATCHING
.100 .100 .100
.200
[5.08] [2.54] [2.54] [2.54]
0.122
[2.21]
10
9
8
SINGLE SIDE STABLE
3
+ 1-
4
-
+
12
+1
5
3
4
5
6+
10
9
8
1 COIL LATCHING
.247
[6.29]
RESET
5
SET
4
RESET
3
SET
-
.100 .100
[2.54] [2.54]
.122
[2.21]
.039
[1.00]
+ 1
.200
[5.08]
-
12
10
9
8
7
-
2 COIL LATCHING
2 COIL LATCHING
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-26
AZ8462
PACKAGING
Tape and reel for SMT version with long terminals - “S”
Section B-B
Section A-A
1.5
2
0.1
±
0.1
10.4
1.75
4
±
±
0.1
A
3.5
Ø 2 min.
B
B
16.5 ± 0.2
24 ± 0.3
11.5
20˚
3˚ max.
11 ± 0.2
0.5 ± 0.05
3˚ max.
16
A
Tape and reel for SMT version with short terminals - “S1”
Section B-B
Section A-A
4 ± 0.1
2 ± 0.1
10.4
1.75
1.5 ± 0.1
A
3.5
Ø 2 min.
B
B
16.5 ± 0.2
24 ± 0.3
11.5
20˚
3˚ max.
9.2 ± 0.2
0.5 ± 0.05
3˚ max.
16
A
SOLDERING DATA
IRS (Infrared Reflow Soldering)
TEMPERATURE (˚C)
SOLDERING
T4
T3
COOLING
T 4 = 245˚C MAX
T 3 = 220˚C MAX
T 2 = 180˚C MAX
T2
T 1 = 150˚C MAX
PREHEATING
T1
60 SEC MAX
100 SEC MAX
100 SEC MAX
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-26
Download