AXIAL
FULL BLEED APPLICATION
SHOT RENDERING
AXIAL
ANATOMY
VARIED
ILLUMINATION
A variety of performance
ceiling wash and accent/task
illumination effects are
available through a multitude
of distributions created by
blending carefully selected
light output and lay-in optics
in either or both the upper
and lower apertures.
COVER UP
Partially diffuse dust
cover enhances indirect
lighting performance and
preserves LED lifespan.
SMART DESIGN AND
INSTALLATION
A 60% recycled aluminum
extruded faceplate and
body paired with a
galvanized steel
backplate form a fixture
that is equally attractive,
durable, and
easy-to-install.
CORE CAPACITY
Integral 0-10V dimming driver
down to 10% or 1% standard.
Additional options include
Lutron, DMX, and DALI
control protocols. Integral
IOTA slim 12W emergency
battery pack provides an
easy solution for egress
compliance.
3.70”
POWERFUL
PERFORMANCE
High performance Nichia
80+ CRI LEDs provide an
optimal light source for
tailored lighting design.
2.25”
3.70”
A-CIRRUS TECH
A unique opal acrylic
diffusing panel which
masks lamp image while
producing soft illumination
ELEMENTS
ADAPTABLE
AESTHETIC
Choice of flush,
overhanging curved, or
overhanging square fascia
adapts the fixture
appearance to suit a
variety of architectural
applications.
INTEGRATIONS
Elements is a simplified product line comprised of 4’ and 8’
nominal length fixtures that can be joined to create continuous
rows.
Integrations is a comprehensive product line comprised of exact
length fixtures and continuous rows.
4’
1’
8’
6’
R
R
w w w. a lig h ts . c o m
AXIAL
MOUNTING
MOUNTING OPTIONS
|
(R) Direct wall mount
EASE OF INSTALLATION
powerfeed locations
Connect
Directly to
J-Box
alternative
power feed
location
knock outs
Mount the Wall bracket (from factory)
directly to wall. (screws not supplied)
Connect power cord to J-Box
Insert to screws (from factory) into the
top of ther Wall Bracket to hold
connect to hangers located on the
bottom of the Wall Bracket.
w w w. a lig h ts . c o m
AXIAL
ELEMENTS
Ordering Code
AXL
A
R
4.70”
Project Info
3.70”
Series:
Length:
Nominal 4’
Nominal 8’
Nominal length 12’ and over
Specify length in 4’ increments
4
8
R___
Single circuit
Multi-circuit
Separate uplight and downlight circuits
1
2
Dimming:
Standard 0-10 dimming
ILS
ILH
-
+
Direct LED standard output (5 W/ft)
Direct LED high output (10 W/ft)
No lower board
DLS
DLH
-
Note: there is some direct light
Quantity
Circuiting:
Indirect LED standard output (5 W/ft)
Indirect LED high output (10 W/ft)
No upper board
Note: there is some indirect light
Type
AXL
Output:
e.g. ILH + DLS
Date
Dimming to 1%, see technical section
Lutron Eco H series (LDE1)
D
D1
Emergency:
Emergency
(1) ILB-SL-CP12 (1200lm for 90min)
E1
Options:
New York City code
N
LED CCT:
3000K
3500K
4000K
30
35
40
Voltage:
Universal 120V - 277V
347V
U
3
Indirect Optics:
Dust cover
a·cirrus™ lens
D
A
Direct Optics:
A
a·cirrus™ lens
A
Fascia:
Flush
Overhang square
Overhang curved
FL
HN
HS
Mounting:
R
Wall bracket
R
Finish:
a∙lightanium™
Satin white
Satin black
T
W
B
Damp Location Rated
w w w. a lig h ts . c o m
AXIAL
INTEGR ATIONS
Ordering Code
AXL
4.70”
A
R
Project Info
3.70”
Series:
AXL
Length:
Exact Length
Specify in 1’ increments. Add “R” in front
of the length for fixtures greater than 8’
___
e.g. R180.00
Date
Type
Quantity
Circuiting:
Single circuit
Multi-circuit
1
2
Other-multi
M___
Separate uplight and downlight circuits
Submit
Output:
Dimming:
e.g. ILH + DLS
Standard 0-10 dimming
Indirect LED standard output (5 W/ft)
Indirect LED high output (10 W/ft)
Indirect LED custom output
No upper board
ILS
ILH
C___
-
Dimming to 1%, see technical section
Lutron Eco H series (LDE1)
Other dimming specify model/series
+
Direct LED standard output (5 W/ft)
Direct LED high output (10 W/ft)
DLS
DLH
Emergency - circuited
Emergency - battery
Direct LED custom output
C___
No lower board
-
Note: there is some indirect light
Note: there is some direct light
D1
D3__
Emergency:
(1) ILB-SL-CP12 (1200lm for 90min)
Specify desired quantity of battery’s
Not available on fixtures < 4’ length
EC
E___
Options:
LED CCT:
3000K
3500K
4000K
D
30
35
40
Multi-circuit
M
New York City code
N
Submit multi-circuiting requirements
Voltage:
Universal 120V - 277V
347V
U
3
Indirect optics:
Dust cover
a·cirrus™ lens
D
A
Direct optics:
A
a·cirrus™ lens
A
Fascia:
Flush
Overhang square
Overhang curved
Mounting:
Wall bracket
FL
HN
HS
R
R
Finish:
a∙lightanium™
Satin white
Satin black
Other Specify RAL#
T
W
B
O____
Damp Location Rated
w w w. a lig h ts . c o m
AXIAL
TECHNICAL DATA
MOUNTING
LINEAR DIMENSIONS
Elements - 4’ and 8’ nominal length individual fixtures that can be joined
to create continuous row lengths.
Integrations - Exact lengths available as individual fixtures or joined to
create continuous row lengths, minimum fixture length is 12 inches.
Integrations + - Contact Design Assist for modifications to product not
detailed within Elements or Integrations specification sheets.
OPTICS
a-cirrus™ lens is a unique opal acrylic diffusing panel which masks lamp
image while producing soft illumination. 65% transmissive as a single
flat panel lay-in; 59% transmissive as a single sheet lay-in or insert
behind glass or polycarbonate lens. A dust cover lens is provided to
protect indirect lighting and enhance LED life.
LED LIGHT SOURCE
Custom manufactured linear board array uses high performance
Nichia® LED in combination with a performance driven heat sink
technology. Tested in accordance with LM79 and LM-80;
L70>60,0000hr; operated at reduced output for high efficacy and lumen
maintenance. 3000K, 3500K, and 4000K with 80+ CRI standard; other
color temperatures and 90+ CRI available upon request, contact factory.
LED color variation maintained at a 3-step MacAdam ellipse (SDCM 3x).
LEDs are available in Low, Standard, and High outputs. Refer to
photometry for delivered lumens. Custom output available in the range
of 25% - 125% of high output, contact factory.
LED DIMMING DRIVER
Direct to wall mounting is ADA compliant. Factory supplied wall bracket
mounts to wall via drywall screws (by others). Connect power cord to
junction box via appropriate power feed knock out. Fixture connects to
hangers located on bottom of wall bracket and factory supplied screws
insert into the top of the wall bracket to secure fixture to wall.
STRUCTURE
14 gauge galvanized steel backplate. Flat ¼” thick aluminum extruded
flush faceplate. Milled curved or squared overhanging faceplate. 060”
aluminum body. 4 lbs/ft approximate fixture weight.
FINISH
Electrostatically applied powder coat finish. Standard finish options
include alightanium™, satin white, and satin black. Other colors and
custom finish options available, specify RAL# or contact factory
regarding custom finish requirement.
LISTING
UL/CUL rated for Damp Locations. Tested in accordance with UL 1598
and certified to CEC/CSA C22.1, NEC, ANSI/NFPA 70, and
NOM-001-SEDE.
WARRANTY
Limited defect-free manufactured equipment warranty provided under
normal use and proper storage for a period of one (1) year. LED
products (LED boards and drivers) will be covered for a period of five (5)
years. Please refer to full terms and conditions on our website.
Factory tuned constant current electronic 0-10V control dimming driver
is standard. Specification grade dimming down to standard. Contact
factory if 1% dimming is required. Constant lumen maintenance ensures
LED’s will maintain required lumen output to end of life to increase
energy savings and enhance reliability. Driver life of 50,000 hrs with
ambient operating temperature range of -30°C to 50°C, maximum case
temperature of 75°C. Electrical specifications at maximum driver load:
PF >0.9, THD <20%, >85% Efficiency. Other available drivers include
Lutron Eco-system H-series (LDE1): Hi-lume™ 1% LED dimming driver
with Soft On, Fade to Black; and DMX and DALI protocol drivers. Other
Lutron and specialty drivers available, contact factory.
EMERGENCY
Factory installed integrated fixture LED emergency battery pack for both
normal and emergency operation. Unit contains long-life Ni-Cad
recyclable battery, 24 hour charger, and converter circuit. Test switch
and charge indicator provided. Test button to be remote located by
others in accordance with local code. Emergency mode provides
constant power to a nominal 12W LED load for a period of 90 minutes,
delivering 1200 lumens of unwavering illumination throughout the full 90
minute emergency duration. Unless otherwise specified, the emergency
battery pack will illuminate one 2 foot end of the fixture in the direct
portion of the fixture.
Emergency circuiting provided as a separate circuit from normal power
circuit according to NEC requirements, specify circuit length and
location.
w w w. a lig h ts . c o m