COMPACT FLUORESCENT
A6201
Catalog # :
6” Housing for Horizontal (2)13W, 18W, 26W, or (1)26W,
32W DTT/TTT Lamps
Type :
Project :
Comments :
5-1/16”
(128mm)
6-5-16”
(160mm)
Ceiling Cut-out : 6-1/2”
DESCRIPTION
The A6201 is a 6” aperture housing for (1) or (2) horizontal CFL lamps. The A6201 is designed for non-insulated ceilings. The A6201 offers a
wide choice of trim types including reflector, lensed and wall wash trims.
D E S I G N F E AT U R E S
Housing
Single wall aluminum housing.
5-1/16” height allows for use in 2” x 6” joist
construction.
Housing adjusts for ceilings up to 1-1/4” thick.
Junction Box
Listed for through branch circuit wiring (Max. 8 No. 12
AWG 90°C branch circuit conductions (4 in, 4 out)).
(5) 1/2” knockouts with true pry-out slots and (4)
knockouts with Romex cable clamp.
Ground wire provided.
Hanger Bars
Rigid structure that allows for easy installation without
warping or moving.
Male/Female design, that will slide easily through the
channel to ensure smooth installation.
Break-off feature, allows it to be shortened without tools,
for narrower joist spacings.
Can be mounted to the long and short sides of the housing
when a tight-fit or perfect positioning is an issue.
Drop down feature allows for easy access to the wiring
compartment.
Pre-installed nail prevents the nail from going on an angle
and causing the hanger bars to be repositioned.
Double headed nail to allow easy removal of housing.
Foot located right below the nail for perfect height
alignment on the joist.
Integrated T-Bar support clip for suspended ceilings.
Reflector
Anodized clear, gold, champagne, pewter color finished
full reflectors.
Anodized reflectors with black or white milled groove baffle
collar.
Provides flicker free and noise free operation and starting.
End of lamp life protection is standard. Meets FCC EMT/
RFI Consumer level limits.
Listing
UL listed for damp location.
UL listed for feed through.
Trim
White plastic ring or plated chrome, satin nickel, polished
brass, natural steel color ring.
Mounting Frame
12” L x 7-5/8” W.
Socket
G24Q/Gx24Q base socket for use with 4pin DTT, TTT
lamps.
Lamp
Compact Fluorescent lamps.
* DTT - Double twin tube (Quad/CFQ)
• (2) 13W 4 pin DTT
• (2) 18W 4 pin DTT
• (2) 26W 4 pin DTT
* TTT - Triple twin tube (CFTR)
• (1) 26W 4 pin TTT
• (1) 32W 4 pin TTT
Electronic Ballast
Thermally protected, fused, 120 or 347 volt electronic
ballast provides full light output and rated lamp life.
Ordering Information
Housing
--A6201
Ballast
---
Lamp(s) Watt.
---
-H120 : 120V High Power Factor
-H347 : 347V High Power Factor
-126 : (1)26W
-132 : (1)32W
-213 : (2)13W
-218 : (2)18W
-226 : (2)26W
Example : A6201-H120-226
Liteline Corporation
8 Abacus Road, Brampton, ON
44
L6T 5B7
Tel: 416-996-1856
Fax: 905-794-1990
Email: sales@liteline.com
liteline.com
Website: liteline.com