Spec Sheet - Villa Lighting

advertisement
Architectural Up/Downlight CFL Wall Sconce
ENGINEERING SPECIFICATIONS
CMH / CFL FIXTURE
Single or Double 18, 26, or 32 Watt Electronic
Single 25 or 32 Watt Dimming
Patent No: US 7,461,964, others pending
(A) Ballast Housing

Extruded aluminum .120 inches thick to
dissipate heat.
(A) Electronic Ballast (Located inside Ballast Housing)

Electronic 2 lamp, 120V through 277V, 50Hz, or 60Hz,
High Power Factor

Programmed start extends lamp life over instant or rapid
start ballasts.

Power Factor .9+, THD<20%

Complies with FCC 18C, non consumer limits

Sound Rate :A:

IR Interface: none

Class "P" thermally protected

Surge protected

End of lamp life protection

5 Year Warranty
FIXTURE DETAILS
(A) 5% Dimming Ballast - Two Wire Diming

Electronic 120V, 60Hz, High Power Factor

THD<33%, .95+ Power Factor, /95+Ballast Factor

Class "P" thermally protected

Dimming down to 5%

A = Advance Mar V, L = Lutron TuWire

40,000 hour rated life - 3 Year Warranty
(A) 1% Dimming Lutron Ballast -Three Wire Dimming

Electronic 120V, 60Hz, High Pow3er Factor

THD<33%, .95+{Power Factor, .95 Ballast Factor

Class "P" Thermally protected

Dimming down to 1%

L1 =Lutron HiLume

40,000 hour rated life - 3 Year Warranty
(B) Lamp Socket

Aluminum glass reflectors have aluminum threads to fit
the socket and are secured by high temperature cement
that bonds the metal and glass.

Female threaded glass that screws ont to male socket
attached to center ballast housing

Hermetically seals the lamp from water and dust

Aluminized glass reflector eliminates glare, redirects light
out of the fixture more efficiently and matches the look of
incandescent lighting
(F) Back Plate

Half hard aluminum .050 inches thick
(G) Mounting Screws

8-32x 3/8’’ hex socket cap.
Paint


Label

Powder coat finish for exterior corrosion protection
Consult factory for special colors
ETL listed for wet locations - Patent N0: US 7,461,964
others pending
(I) Lamp

Replaceable 10,000 hour rated life compact fluorescent
lamp
(M) Fixture Housing

20 gauge roll and formed aluminum
JANMAR LIGHTING, INC.
730 West Golden Grove Way, Covina, CA 91722
Tel. No. (626) 858-6776
Fax No. (626) 967-0314
Specification sheet subject to change without notice
Project Name:
Type:
Catalog Number:
Date:
Architectural Up/Downlight CFL Wall Sconce
Series
Lamp
Glass
Beam Spread
Finish
1955ED – 18DTA – T6G12 – APAR38 – LV – BLK – LMP
“U” or “D” Lamp Wattage
Options
LOGIC 6 DESIGN STEPS
ORDERING INFORMATION
Ordering Example:
Indoor Or Outdoor Up/Down Light

Available As An Rup And Downlight

Avaailable As A Downligh Tonly

Available As An Uplihg Tonly

ETF West Listed
Catalog
Number
Lamp
Type
Input
Watts
Input
Volts
Product
Description
18 Watt - Electronic
1955EU-18DTA-APAR38D
1955ED-18DTA-APAR38D
1955E-2x18DTA-APAR38D
D18E
D18E
D18E
20
20
40
120/277
120/277
120/277
18W Uplight
18W Uplight
Dual 18W Up/Downlight
D26E
D26E
D26E
28
28
56
120/277
120/277
120/277
26W Uplight
26W Uplight
Dual 26W Up/Downlight
D26E
D26E
D26E
D26E
D26E
D26E
28
28
28
28
28
28
120
120
120
120
120
120
Advance 5% Uplight
Advance 5% Downlight
Lutron 5% Uplight
Lutron 5% Downlight
Lutron 1% Uplight
Lutron 1% Downlight
PAR38 Glass Reflector

Provides The Look Of Incandescent

Creates Greater Center Beam Intensity

Provides Stronger Side Light Cut-Off
D32E
D32E
D32E
28
28
56
120/277
120/277
120/277
32W Uplight
32W Uplight
Dual 32W Up/Downlight
D32E
D32E
D32E
D32E
D32E
D32E
28
28
28
28
28
28
120
120
120
120
120
120
Advance 5% Uplight
Advance 5% Downlight
Lutron 5% Uplight
Lutron 5% Downlight
Lutron 1% Uplight
Lutron 1% Downlight
Multiple Wattage Options - Up And Downlight
• Two Triple 18W CFL Lamps = 2x85w Of Incandescent Light
• Two Triple 26W CFL Lamps = 2x100w Of Incandescent Light
• Two Triple 32W CFL Lamps = 2x120w Of Incandescent Light
26 Watt - Electronic
1955EU-26DTA-APAR38D
1955ED-26DTA-APAR38D
1955E-2x26DTA-APAR38D
26 Watt - Dimming
1955DAU-26DTA-APAR38D
1955DAD-26DTA-APAR38D
1955DLU-26DTA-APAR38D
1955DLD-26DTA-APAR38D
1955DL1U-26DTA-APAR38D
1955DL1D-26DTA-APAR38D
32 Watt - Electronic
1955EU-32DTA-APAR38D
1955ED-32DTA-APAR38D
1955E-2x32DTA-APAR38D
32 Watt - Dimming
1955DAU-32DTA-APAR38D
1955DAD-32DTA-APAR38D
1955DLU-32DTA-APAR38D
1955DLD-32DTA-APAR38D
1955DL1U-32DTA-APAR38D
1955DL1D-32DTA-APAR38D
CMH Beam Spread (Must Select):
SP
Spot Lens (20W - 11°, 39W - 15°, 70W - 15°)
FL
Flood Lens (20W - 30°, 39W - 30°, 70W - 32°)
WFL
Wide Flood Lens (20W - 45°, 39W -40°, 70W - 36°)
CB/SP
Clean Bam spot Lens (Removes radiant light like AR70 & AR111 lamps)
DB/SP
DiamondBrightTM Spot Lens (Remove red from color spectrum)
DB/FL
DiamondBrightTM Flood Lens (Remove red from color spectrum)
Fixture Color Option (Must Select):
WHT
Textured matte white
BLK
PWT
Smooth matte pewter
AB
Custom colors available - Consult factory for more details
Options:
CHS
SSN
TSN
NS
277V
LMP
UV
LS
H
LV
UV Block
Lens Softener
Halogen Color Filter
3/8” Deep Black Honeycomb Louver
Textured matte black
Architectural Bronze
YLW-LPAR30
RED-LPAR30
AMB-LPAR30
GRN-LPAR30
BLU-LPAR30
Multiple Wattage Options - Up And Downlight
• One Teiple 18W CFL Lamps = 85W Of Incandescent Light
• One Triple 26W CFL Lamps = 100W Of Incandescent Light
• One Triple 32W CFL Lamps = 120W Of Incandescent Light
On/Off Or Dimming

On/Off - Electronic

Electronic 2x18w, 2x26w, Or 2x32w

5% Dimming - 26W, 32W

Lutron Tuwire Or Advance Mark V

1% Dimming - 26W, 32W

Lutron Hilume
120 Or 277 Volt

On/Off - Intellivolt 120V Through 277V Ballast

Dimming - Dedicated 120V Or 277V Ballast

Advance 5% Dimming 120 Or 270 Volt

Lutron 5% Dimming 120 Volt

Lutron 1% Dimming 120 Volt
3’’ Cross Hair with Straight Sided Snoot
3’’ Straight Hair Sided Snoot
3’’ Tapered Sided Snoot
No Snoot (Element Holder Must have Snoot)
120/277 Volt
Add 3 letter code to include CMH Lamp with order (3000K Temp. Standard)
Element Options:
Linear Spread Lens
LSL
IntellivoltTM Advance CFL Ballast - THE BEST!

Commerical Grade 5 Year Warrantied Ballast

Operates Any Voltage From 120 Through 277 Vvolts

Operates Either On 50 Or 60 Hz

Cold Starting At 0°F

End Of Life Lamp Protection

Programmed Start Extends Lamp Life Over Instant
Or Rapid Start Ballasts
Yellow Color Filter
Red Color Filter
Amber Color Filter
Green Color Filter
Blue Color Filter
Universal Easy Installation - Two Part Design

Back Pan And Ballast Mount to J-Box

Font Cover Attaches After Back Plate And Lamps
Installed

Front Cover Attaches To Back Plate With Four Slot
Screws
Multiple Color Lens Options

Red, Blue, Green, Peach, Straw, Or Yellow

Color Can Be Added To Up Or Down Light

Same Color for Both Up/Down Light Or Different
Color For Up And Down Light
JANMAR LIGHTING, INC.
730 West Golden Grove Way, Covina, CA 91722
Tel. No. (626) 858-6776
Fax No. (626) 967-0314
Specification sheet subject to change without notice
Project Name:
Type:
Catalog Number:
Date:
Download