COMLINE® OSP
Wall-Mount Cabinet Packages
Bulletin
DCOM
Rack mount devices
shown not included
Application
Construction
Lightweight, corrosion-resistant aluminum enclosure secures and
protects sensitive rack mounted equipment. Particularly appropriate
for back haul, DSL, and infill applications.
Ready-to-use package includes
• Top-mounted solar shield
• One set of rack angles
• Doorstop
• Solid gland plate on latch side
• Sturdy padlocking L-Handle
• Rear panel mounting studs for wood panel
• Door alarm switch
• Package of twenty 10-32 cage nuts
• Grounding provisions
• Type 5052-H32 aluminum. Door is .100 in. thick; body is .100 or
.125 in. thick, depending on cabinet size
• Seams continuously welded and ground smooth for a finished
appearance
• Body includes studs for ground bar and rear mounting studs for
wood panel
Features
• Solar shield helps keep enclosure interior cool when cabinet is
installed outdoors and directs liquids away from cabinet opening;
can be removed for indoor installations
• Foam-in-place gasket provides environmental seal
• Padlocking L-Handle provides a tight, secure door seal
• Doorstop holds door in place during service for easier and faster
maintenance
• Heavy duty hinged door is easily removed to facilitate equipment
installation and removal. Maximum door load 50 lbs (22.7 kg)
• Rack angles adjustable front to rear of cabinet
• Gland plates available with cutouts that fit Hoffman T15, T20,
and CR23 air conditioners and Hoffman XR20 and XR29 heat
exchangers
• Radius corners on cabinet eliminate sharp edges
• Stainless steel fasteners resist corrosion to maintain professional
appearance
• Ple mounting kits available for all sizes
• Pad mounting plinth available for 600mm deep cabinets
Subject to change without notice
Finish
RAL 7035 light textured low gloss polyester urethane powder
coating over an iron phosphate treated surface. Custom finishes
available: consult your local Hoffman office
Industry Standards
UL 508A Type 3, 3R, 4, 4X, 12
CSA Type 3, 3R, 4, 4X, 12
NEMA/EEMAC Type 3, 3R, 4, 4X, 12
EC60529, IP66
Designed to meet Telcordia NEBS™ GR-487, GR-63, and IEC 48D
EIA 310-D with 19 in. spacing for rack equipment
Meets BICSI TDMM, Tenth Edition, Chapter 7, Telecommunication
Enclosures (TE)
Cabinet is RoHS compliant
Accessories
See following pages for available accessories.
NEBS™ is a trademark of Telcordia.
PH 763 422 2211 • FX 763 422 2600 • www.ehoffman.com
© 2007 Hoffman Enclosures Inc.
COMLINE® OSP
Wall-Mount Cabinet Packages
Bulletin
DCOM
Standard Sizes COMLINE ® Wall-Mount Enclosure Packages
Catalog Number
AxBxC
(in.)
Nominal A x B x C
(mm)
P
(in.)
P
(mm)
Q
(in.)
Q
(mm)
Rack Units
ECL606050P
23.62 x 23.62 x 19.68
600 x 600 x 500
17.47
444
12.47
317
12
ECL906050P
33.43 x 23.62 x 19.68
900 x 600 x 500
30.47
774
12.47
317
18
ECL907060P
33.43 x 27.56 x 23.62
900 x 700 x 600
30.47
774
12.47
317
18
ECL1207060P
47.24 x 27.56 x 23.62
1200 x 700 x 600
30.47
774
12.47
317
25
Subject to change without notice
PH 763 422 2211 • FX 763 422 2600 • www.ehoffman.com
© 2007 Hoffman Enclosures Inc.
COMLINE® OSP
Wall-Mount Cabinet Packages
Bulletin
DCOM
Gland Plate
Gland plates are made of .100 in. thick aluminum, finished to match
the cabinet. They include a factory-installed foam-in-place gasket,
stainless steel hardware, and grounding provision. The installed gland
plate maintains the cabinet rating.
NOTE: Package includes solid gland plate.
Catalog Number Description
Nominal Height x Width
(P x Q) (mm)
EGPS1
EGPS2
EGPACT15
EGPACT20
EGPACCR29
EGPHX20
EGPHX29
508 x 381
838 x 381
508 x 381
838 x 381
838 x 381
838 x 381
838 x 381
Solid small
Solid large
AC cutout for T15
AC cutout for T20
AC cutout for CR23
Heat exchanger cutout for XR20
Heat exchanger cutout for XR29
Plinth Base
The plinth base enables pad mounting and provides additional cable
management space. It adds an additional 5.00 in. (127mm) height to
the cabinet. The base is made of aluminum painted RAL 7035
Light Gray.
Catalog Number
Description
Use with Cabinet
(Width x Depth)
EPL7060
Plinth base
700 x 600mm
Ground Buss
This copper ground buss provides wiring tie points within the
cabinet. Mounts on studs provided on cabinet side. .Tie point spacing
is 3/4 in. pair to pair and 5/8 in. across each pair. Ground studs are
1/4-20 x .75 in. on 3/4 in. centers.
Rack Angles
Rack angles are made of 12 gauge, self-grounding plated steel and are
grounded to the cabinet body through the mounting bolts. Square
mounting holes meet EIA standard.
Catalog Number
Description
EGBB1
EGBB2
6 position, double lug buss
12 position, double lug buss
NOTE: Package includes one pair.
Catalog Number
Rack Width
RU
Use with Cabinet
(Height x Width)
ERA196S
ERA199S
ERA19239S
ERA192312S
19 in.
19 in.
19 or 23 in.
19 or 23 in.
12
18
18
25
600 x 600mm
900 x 600mm
900 x 700mm
1200 x 700mm
Accessory Compatibility
CATALOG
NUMBER
ECL606050P
GLAND PLATES
Vertical pole mount channel facilitates pole-mounting the
COMLINE®package. It includes the bracket and hardware to mount
the channel to the cabinet. No drilling into cabinet required to install.
EGPS1
EGPS2
EGPACT15
EGPACT20
EGPACCR23
EGPHX20
EGPHX2918
Catalog Number
Description
Use with Cabinet
POLE MOUNT CHANNELS
EPMC6
EPMC9
EPMC12
Vertical Pole Mount Channel 600
Vertical Pole Mount Channel 900
Vertical Pole Mount Channel 1200
600mm tall
900mm tall
1200mn tall
Vertical Pole Mount Channel
EPMC6
EPMC9
EPMC12
ECL906050P
ECL907060P
ECL1207060P
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PLINTH BASE
EPL70660
•
•
WOOD PANELS
Wood Panel
Wood panels are made of 3/4 in. plywood, precut and predrilled to
install on panel mounting studs in the rear of the cabinet.
Catalog Number
Height x Width
(mm)
Use with Cabinet
(Height x Width)
E60P60W
E90P60W
E90P70W
E120P70W
524 x 524
824 x 524
824 x 624
1124 x 624
600 x 600mm
900 x 600mm
900 x 700mm
1200 x 700mm
Subject to change without notice
E60P60W
E90P60W
E90P70W
E120P70W
•
•
•
•
RACK ANGLES
ERA196S
ERA199S
ERA19239S
ERA192312S
•
PH 763 422 2211 • FX 763 422 2600 • www.ehoffman.com
•
•
•
© 2007 Hoffman Enclosures Inc.
COMLINE® OSP
Wall-Mount Cabinet Packages
Bulletin
DCOM
Handle Options
Can be padlocked for added security. Kit
includes handle and mounting hardware.
Maintains UL Type 4 and NEMA Type 4X
ratings. When field installed leave lower
padlock bracket in place. Can be factory
installed to eliminate padlock bracket;
consult your local Hoffman Sales Office.
Catalog Number
Description
ELHP
EPL4
DL36
Padlocking L-Handle
Padlocking quarter-turn knob, with key
Locking wing nut with 2 keys, silver finish
Mounting Bracket Kits
Mounting bracket kits include four
brackets and associated mounting
hardware. Sealing washers provided with
each kit maintain Type 4, 4X, or 12 rating
after installation.
Catalog Number
Material
CMFKSS
CMTGFT
Type 304 stainless steel
Composite
VelcroTM Cable Wrap
Securely holds cable to cable
manager, yet unfastens easily for cable
maintenance. VelcroTM is 0.5 in. (12.7mm)
wide. Available in 8 and 12 in. (203 and
305mm) lengths.
Model with mounting screw shown
Catalog
Number
Description
Ecwtd8b
Screw fastener style. Includes
M5 mounting screw
ecwtd12b Screw fastener style. Includes
M5 mounting screw
ECW8B
Wrap style
ECW12B
Wrap style
ECW8r
Wrap style
ECW12r
Wrap style
ECW8l
Wrap style
ECW12l
Wrap style
ECW8y
Wrap style
ECW12y
Wrap style
Length Length
(in).
(mm) Color
Pkg. Qty.
8
203
Black
10
12
305
Black
10
8
12
8
12
8
12
8
12
203
305
203
305
203
305
203
305
Black
Black
Red
Red
Blue
Blue
Yellow
Yellow
10
10
10
10
10
10
10
10
Screw and Cage Nut Kits
Screw and cage nut kits are for use with
square hole rack angles.
Catalog
Number
Screw Kits
Color
Description
Kit Qty.
ASM5
ASM6
ASM6250
AS1032
AS1032250
as1032b
Silver
Silver
Silver
Silver
Silver
Black
M5 x 20mm Phillips-head screw kit
M6 x 16mm Phillips-head screw package
M6 x 16mm Phillips-head screw package
10-32 x 5/8 in. combo head screw package
10-32 x 5/8 in. combo head screw package
10-32 x 5/8 in. combo head screw package
20
20
250
20
250
20
Cage Nut Kits
PM5CN
Silver
M5 cage nut kit
pm6cn
Silver
M6 cage nut kit
PM6CN250 Silver
M6 cage nut kit
Silver
10-32 cage nut kit
P1032CNa
P1032CN250 Silver
10-32 cage nut kit
P1224CN
Silver
12-24 cage nut kit
a Cage nuts included in package.
20
20
250
20
250
20
Velcro™ is a trademark of Velcro Industries B.V.
HOFFMAN
2100 Hoffman Way, Anoka, MN 55303-1745 USA
(763) 421-2240 • Fax (763) 422-2600 • www.hoffmanonline.com
Customer Service (763) 422-2211
Subject to change without notice
© 2007 Hoffman Enclosures Inc.
Spec-00215
Rev. A
02/07