Company Name:
UL File Number:
UL issued:
Component:
Recognition:
Summary:
LeitOn GmbH
E348420
March 13, 2013
Wiring, Printed – Component (ZPMV2)
Full Recognition (V-0 and DSR)
Rev 1.1 from 11.9.2013
IMPORTANT NOTICE:
Below information has been derived from UL descriptive reports. Explanations have
been added to our best knowledge. For legal liability please visit UL-Database and refer
to available information there, only! You can search for above mentioned E-number.
Below information is for reference only, errors excepted.
1. General Information
Pattern Limits
Min.
Width
mm
(in.)
Max.
Area
Diameter
mm (in.)
Min.
Edge
Width
mm
(in.)
2
0.100
(0.004)
0.100
(0.004)
3
75.0
(2.95)
75.0
(2.95)
4
0.100
(0.004)
0.100
(0.004)
Type
1
S01
M01
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Solder Limits
Maximum
Operating
Temp.
(°C)
UL 94
Flame
Class
Meets
UL796
DSR
C
T
I
6
7
8
9
10
280
20
120
V-0
All
3
280
20
120
V-0
All
*
Max.
Temp.
°C
(°F)
5
Max.
Time
(sec.)
S01 classifies single- and double-sided PCBs. M01 classifies multilayer PCBs
Smallest conductor width is 0,10 mm.
Biggest un-pierced copper area may be a round area with a diameter of 75
mm.
Smallest distance between conductor and outline is 0,10 mm.
Maximum soldering temperature is 280°C…
…for maximum 20 seconds.
Maximum operating temperature in application is 120°C
UL 94 Flame Class is “V-0”
Finished PCB meets UL 796 DSR requirements.
Level “3” = CTI of 175, “*” = various CTI (due to Isola Duraver-E-Cu#104
with CTI = 250)
2.
Base Materials – Single- and Double-Sided PCBs
Base Material
UL/
Type
ANSI
Grade
Mfr
Grade
1
2
3
4
S01
FR-4
IL
ILM-R1
Min.
Thk.
mm
(in.)
Min.
Copper
PWB
SS/
Thk.
Mfg
DS
mics
Proc
(mils)
5
6
0.38
18
(0.015) (0.71)
Meets
UL
746E
DSR
7
8
9
DS
A
Yes
DS
A
Yes
Duraver-E-Cu#104,
S01
FR-4
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
IU
ED130UV, PCL-FR226, PCL-FR-240,
FR402, IS402
0.38
18
(0.015) (0.71)
CTI V
(PLC)
10
175
(3)
250
(2)
175
(3)
S01 classifies single- and double-sided PCBs.
Material is FR-4 (“Flame Retardant”, class 4), UL-Component “QMTS”
Manufacturer code: IL: International Laminate, E134893; IU: Isola USA,
E41625
Certified materials for supplier(s)
Minimum PCB thickness is 0,38mm
Minimum copper is 18µm
Applies for Single- and Double-Sided PCBs
Recognized production process A from LeitOn (not included here)
Base material meets UL 746E DSR requirements.
CTI value for Duraver-E-Cu#104 is 175 (class 2), all others CTI 175 (class 3)
3.
Base Materials – Multilayer PCBs
Base Material
Individual Laminate Matl.
Type
1
M01
UL/
ANSI Mfr
Grade
2
3
FR-4
1.
2.
3.
4.
5.
6.
7.
8.
9.
a.
b.
10.
a.
b.
11.
12.
13.
14.
PE
Grade
Min
Thk
mic
4
5
R-1755M
R-1757M 100
R-1758M
Individual Bonding Sheet
Matl.
UL/
ANSI Mfr
Grade
6
FR-4
7
PE
Grade
Min.
Thk.
mic
Total
Build
-Up
Thk.
mm
8
9
10
54
0.34
R1650M
74
0.38
Conduct
or
Thk.
mic
PWB
Mfg
Proc
11
12
13
14
B
Yes
175
(3)
Meets
UL
CTI V
746E (PLC)
DSR
E: 18
I: 35
E: 18
I: 70
M01 classifies multilayer PCBs.
Laminate (core) material is FR-4 (“Flame Retardant”, class 4), ULComponent “QMTS”
Laminate (core) manufacturer code: PE: Panasonic Electric, E81336
Certified laminate (core) materials for supplier(s)
Minimum laminate (core) thickness is 100µm
Bonding sheet (prepregs) material is FR-4 (“Flame Retardant”, class 4), ULComponent “QMTS”
Bonding sheet (prepregs) manufacturer code: PE: Panasonic Electric, E81336
Certified bonding sheet (prepregs) materials for supplier(s)
Minimum bonding sheet (prepregs) thickness is:
54µm for 35µm inner layer copper
74µm for 70µm inner layer copper
Minimum PCB thickness is
0,34mm for 35µm inner layer copper
0,38mm for 70µm inner layer copper
Minimum external (outer) copper is 18µm, maximum inner copper is 70µm
Recognized production process B from LeitOn (not included here)
Base material meets UL 746E DSR requirements.
CTI value is CTI 175 (class 3)
4.
Applicable Finishes
Type
Pure copper (no finish)
Immersion tin
HAL lead free
HAL lead
Immersion gold ENIG
Immersion Gold
ENEPIG
Connector/Hard-gold
Immersion silver
5.
Applicable for UL
yes
Yes
Yes
No
Yes
Yes
comment
Not recommended
Not RoHS compliant
Yes
No
Applicable Prints
Type
Solder Mask
Applicable for
UL
yes
Hole Plugging
Peelable Mask
Carbon ink
No
Yes
No
Silk Print
Yes
comment
Lackwerke Peters (E80315), Type
$24%7##, all colours and appearances
within product range, all printing
processes
Being removed from PCB, no UL required
Ink itself not UL capable due to
flammability
Any type
The yellow-card is available online at UL-data base:
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm