WLTB Wet Location T-Bar Specification-Grade Recessed Wet Location T-Bar Luminaire Project Type Date Application Features Specification-grade enclosed and gasketed luminaire. For use with indoor and outdoor (canopy) applications that require a recessed lay-in T-Bar luminaire with a door frame. This luminaire's heavy-duty welded steel housing, shallow design and dust and moisture resistance makes it ideal for the interior of marine vessels and ships. Cat # Specifications Features Optical System • Ideal for interior of marine vessels and ships • Available with 1, 2, 3, 4, 6 or 8 lamps (T5, T8 and PLL/Biax configurations) • Heavy-duty welded steel housing construction • Die-formed steel pin hinges on either side • Integral earthquake clips Mounting Lay-in type luminaire for exposed grid type acoustical ceiling structure. Construction Die-formed and spot welded, heavy-gauge steel housing assembly. Die-formed, code gauge steel door frame. Spot-welded for rigidity and clean appearance. Through hole is provided on side of housing for connection to power supply. Back surface contains no holes. Diffuser is held within a hinged door frame. Closed cell neoprene gasket provides a seal between door frame assembly and housing. Spring push clips retain the diffuser against the door frame. Ballast cover is mounted on one side of the fixture in order to provide uniform illumination and to avoid shadowing caused by dark reflective areas. Fasteners are plated or corrosion resistant. Captive nuts or equivalent are used throughout. Finish White, polyester powder painted housing. Electrical Rotary lampholders ensure positive lamp retention. Standard wiring is provided for marine vessel use. Approvals Approved to CSA and UL standards. Options & Adders • Enhanced specular aluminum reflector with a minimum reflectance of 95% • Emergency ballast • Radio interference filter (120V - 277V) • Drywall flange kits available • Clear, prismatic polycarbonate lenses • Clear, opal smooth white and high-impact prismatic acrylic lens • Additional lens gasketing • Flexible cord feed- two circuit cab tire cord Applications • Ships and Marine Vessels • Damp and Dusty Environments Dimensions Visioneering 35 Oak St. Toronto, ON M9N 1A1 Phone: (416)245-7991 Fax: (416)245-4778 | www.viscor.com | Visioneering is a Viscor Group brand Page 15 SPECIALTY LIGHTING Standard diffuser is a clear prismatic pattern #12 acrylic lens, designed for highefficiency and low-glare illumination. Optional reflectors are available in specular aluminum with a minimum reflectance of 95%. WLTB Wet Location T-Bar Project Type Specification-Grade Recessed Wet Location T-Bar Luminaire Date Cat # Photometrics - Please consult www.viscor.com for photometric results. Ordering - WLTB - No. of Lamps Size (Width x Length) 1x4 2x2 2x4 Lamp Watts 1L 2L 3L 4L 6L 8L* Voltage 120 347 UNV UN4 (See Option Code Section For More Information) Ballast Type N - Instant Start P - Program Start R - Rapid Start G4 G6 Lamp Type T5 T5HO T8 T8U2 T8U6 PLL Ballast Options B01 Ballast Disconnect - In-line Power Disconnect (CSA-UL Req'd For Voltages above 150v) B08 Ballast - High Ballast Factor B09 Ballast - Low Ballast Factor B30 Emergency Lighting Battery Pack Specification Grade B33 Emergency Lighting Battery Pack 1-lamp B34 Emergency Lighting Battery Pack 2-lamp See Table below * 2x4 size PLL lamps only - 120V - 347V - 120-277V - 347-480V Options Gasket Options Gasket Mounting (gasket on flange of housing) Gasket lens to frame Packaging Options SPECIALTY LIGHTING K0 Pack Bulk/ Pallet Packed and/or Wrapped Lens and Shielding Options (select one only) (Pattern 12 Prismatic Acrylic is standard) P04 P05 P07 P12 P13 P15 P16 P45 Note: For recessed drywall applications use either 1x4, 2x2 or 2x4 flange kit. Example: WLTB1x42L-T528PUNV-B01 Acrylic Smooth Opal Lens Clear Acrylic Lens Clear Polycarbonate Lens Pattern P12 Prismatic Acrylic Lens Prismatic Acrylic Lens - P12 Nominal .125" Thick Prismatic High Impact Acrylic Lens - P12 Prismatic Polycarbonate Lens - P12 Clear Polycarbonate Lens - .125 Thick Lamp Watts Nominal Lamp Watts Size T5 28 54 32 1x4 (1,2,3 lamps) (1,2,3 lamps) (1 or 2 lamps) 2x2 2x4 T5HO T8 T8U6 PLL/ Biax 31 32 (2 or 4 lamps) (2 lamps) 40, 50, 55 T8U2 14 24 17 31 32 (2,3,4,6 lamps) (2,3,4,6 lamps) (2, 3 or 4 lamps) (2, or 4 lamps) (1 or 2 lamps) 28 54 32 31 32 (2,3,4,6 lamps) (2,3,4,6 lamps) (2,3,4 lamps) (4,6,or 8 lamps) (2 or 4 lamps) Other options may be available consult factory. Specifications and data subject to change without notice. (2 or 4 lamps) 40, 50, 55 (2, 3 or 4 lamps) 40, 50, 55 (4,6,or 8 lamps) Fusing and Breaker Options (select one only) T5 Fuseholder, In-line Double Pole T6 Fuseholder, In-line Single Pole Wiring Options V06 Flexible Feed Cord (single circuit only) V26 Stranded Wiring (required for marine vessel use) V32 Wiring - 2-Circuit Cord Reflector Options VF1 Reflector VF1 Specular (95% Reflectance) Aluminum Approval and Rating Options X7 Dual CSA and USA Markets Lamp Options Z1 Lamps installed (specify type) Visioneering 35 Oak St. Toronto, ON M9N 1A1 Phone: (416)245-7991 Fax: (416)245-4778 | www.viscor.com | Visioneering is a Viscor Group brand 201305A Page 16