PROJECT INFORMATION
MEDMASTER SOFTSTEP™ STEPLIGHTS
Patient Room Steplight
Job Name
Fixture Type
MSL SERIES – FABRICATED
Catalog Number
Approved by
PRODUCT FEATURES:
»» Recessed wall mount – Oval and Rectangle
available in horizontal or vertical orientation
»» NSF2 listing for cleanability
»» White, Amber, Blue or Red LED lamp options
»» Lumen output adjustable from
40-100%
»» ADA Compliant
MSLO-V
MSLO-H
MSLS
MSLR-H
MSLR-V
SPECIFICATIONS
HOUSING: 18-gauge CRS. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Four .875" knockouts.
FACEPLATE: 18-gauge CRS (powder coated) or Type 304 Brushed Stainless Steel. Faceplate secured to housing with stainless steel screws. Internal louver is positioned behind lens for easy cleaning
of entire faceplate. See Faceplate Finish in Ordering Information for color selection.
LENS: Polycarbonate, acrylic or tempered glass lens. Polycarbonate and acrylic lens available in clear, prismatic or translucent white. Tempered glass available in clear or prismatic.
ELECTRICAL: 120VAC or 277VAC LED technology. Available in white, red, amber and blue.
INSTALLATION: Two adjustable mounting brackets for new construction.
PHOTOMETRICS: Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric information, go to www.kenall.com.
LISTINGS: UL and CUL Listed for Damp Location. See Option for Wet Location listing. NSF2 Splash/Non-Food Zone.
LED
ADA
ORDERING INFORMATION (Ex: MSLO-H-F-0-GW-CP-WLL-120-2)
Model
Faceplate
Model
MSLO-V Oval Vertical
MSLO-H Oval Horizontal
MSLR-V Rectangle Vertical
MSLR-H Rectangle Horizontal
MSLSSquare
Faceplate
F† Full Face
L* Internal Louver
S† Slotted (n/a on Oval models)
Faceplate Material
0
18-Ga CRS (Painted)
1
18-Ga Type 304 SS Brushed
Faceplate Material
Faceplate Finish
Lens Type
Lamp Type
Faceplate Finish
GW Gloss White Antimicrobial
MW Matte White Antimicrobial
MB Matte Black Antimicrobial
BEBeige
DB Dark Bronze
LG Light Gray
IVIvory
CS Cool Satin Painted Anodized
WS Warm Satin Painted Anodized
BSS Brushed SS
Voltage
Fasteners
Option
Packaging
Voltage
120 120 Volts
277 277 Volts
Fasteners
2
Torx Head w/Center pin (2)
3
Phillips-head Fasteners (2)
Option
WL Wet Location Listed
Lens Type
Polycarbonate
CP* Clear Polycarbonate
PP Pearlescent Polycarbonate
2
.125" #12 Prismatic Polycarbonate
Acrylic
T* .125" Clear High Impact Acrylic
PIA Pearlescent Acrylic
U
.125" #12 Prismatic High Impact Acrylic
Tempered Glass
8* .187" Clear Tempered Glass
R
.156" C73 Prismatic Tempered Glass
Packaging
SP** Split Packaging (min. quantity 10 pcs)
† n/a with clear lens
* Internal Louver (L) available with clear lens option only
**Rough-In Box (Box 1), Fixture Section (Box 2)
Lamp Type
Low Lumen
WLL 4100K White Low Lumen LED (0.05A/0.55W)
ALL Amber LED (0.05A/0.50W)
RLL Red LED (0.05A/0.50W)
BLL Blue LED (0.10A/1.20W)
High Lumen
WHL 4100K White High Lumen LED (0.10A/1.10W) (n/a w/Square)
www.kenall.com
P: 800-4-Kenall
F: 262-891-9701
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2016 Kenall Mfg. Co. All rights reserved.
MSL_O_R_S-092116
For additional photometry, go to www.kenall.com
MEDMASTER SOFTSTEP™ STEPLIGHTS
Patient Room Steplight
MSL SERIES – FABRICATED
DIMENSIONAL DATA
MSLS
MSLR-H
E
MSLO-H
E
E
F
F
F
SIDE VIEW
Vertical
Horizontal
Wall thickness range
5/8"-1 1/4"
Wall Thickness
Range 5/8"-1 1/4"
B
A
A
B
C
D
C
D
CEILING CUTOUT
J
J
I
I
DIMENSIONAL DATA (IN INCHES)
A
B
C
D
MSLO-V
MSLR-V
MSLO-H
MSLR-H
MSLS
8.75
7.00
5.75
4.38
5.00
6.50
6.50
3.25
3.25
3.25
www.kenall.com
.30
.30
.30
.30
.30
3.12
3.12
3.12
3.12
3.12 E
8.750
7.00
8.750
7.00
5.00
P: 800-4-Kenall
F
5.750
4.375
5.750
4.375
5.00
RECOMMENDED CUT-OUT
I
J
3.38 × 6.63
3.38 × 6.63
6.63 × 3.38
6.63 × 3.38
4.63 × 3.38
F: 262-891-9701
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2016 Kenall Mfg. Co. All rights reserved.
MSL_O_R_S-092116