ONLINE AUCTION
MATCO METAL BVBA IN FAILLISSEMENT (BE)
Metalworking
Parklaan 32 - 9690 Kluisbergen
(Loten/Lots 1 - 1214)
Closing date: Tuesday 02 OCTOBER starting 14:00
Bidding only on the internet!
14­09­12 16.21
www.TroostwijkAuctions.com
Tuesday 02 October 2012 MATCO METAL BVBA IN FAILLISSEMENT
Specific terms and conditions of the online sale
Closing date
Viewing
Company organising this Online
Auction
Markup
VAT
Collection
Viewing instructions
Tuesday 2 October 2012 starting 14:00 CET
Thursday 27 September from 09:00 until 16:00 CET
Monday 1 October from 09:00 until 16:00 CET
Loten/Lots 1 - 1214
Parklaan 32
9690 Kluisbergen, Belgium
TROOSTWIJK BELGIE
Desguinlei 22 Bus 3
2018 ANTWERPEN, Belgium
Phone: +32-(0)3-287.62.62
Fax: +32-(0)3-287.62.63
Email: info@troostwijk.be
17.00%
21.00%
Tuesday 9 October from 09:00 until 16:00 CET
Loten/Lots 1 - 1214
Parklaan 32
9690 Kluisbergen, Belgium
Please note that this concerns an ascending auction sale, preceded by a viewing
day. Placing a bid without viewing the equipment is at one's own risk. Please see
articles 3 and 6 of the General Conditions.
Delivery instructions
The buyer is fully responsible for the dismantling, loading and
transportation of the bought lots. Troostwijk NV cannot accept any
responsibility. The delivery (pick-up bought lots) will only take place on the
mentioned delivery date/time and address.
Payment Details
Purchases need to be paid within 48 hours after closure of sale by bank transfer to one of the below mentioned account numbers. Please mention buyernumber and name of the sale when transferring. Bank
Fortis
KBC
ING
Account
220-0725551-27 411-1106201-15 320-0037404-32 IBAN nr.
BE48 2200 7255 5127
BE83 4111 1062 0115 BE90 3200 0374 0432 BIC Code
GEBABEBB
KREDBEBB
BBRUBEBB
General Terms and Conditons of
sale
On the sale the general terms and conditions of the online sale are applicable
concerning the (possible) purchase of moveable assets, furthermore these specific
terms and conditions.
Following lots
After registration and login, lots can be ‘followed’ via ‘My Troostwijk’. This option has
been constrained to a maximum of 100 lots per user per sale.
Combination
All lots in a combination will be sold individually first. After the last lot is sold, the
total of bids is raised 10%. This is the starting bid of the combination. If the
combination is sold it overrules the individual bids, if not the individual bids are
applicable.
Prolongation
If a bid is made in the last 10 minutes before the lot closes, the closing time of that
lot will be extended with 5 minutes until no bids are made.
All lots without any bid will stay open until half an hour after the last closing time bid.
Lots without bid
www.TroostwijkAuctions.com
Lot
Number Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
1 Lot of various semifinished products
Lot of various semifinished products,tubes, truncheons, tube connections, stanges, plate remains,
banister constructions, 1 vehicle of aluminium material, incl. racks (dismantling upon indication of
Troostwijk)
1 Band saw
Karmetal, 220 KDG, year built 2005, Band saw, electricity consumption: 1,5 Kw, voltage: 400 V,
band saw size: 3000 - 27 - 0,9, provided with a clamp installation, max. 280 mm, machine size:
72x150xH 160 cm + roller conveyor, 11 roles, width: 60 cm, height: 97 cm, length: 600 cm + roller
conveyor, 6 roles, width: 60 cm, height: 97 cm, length: 300 cm
1 Sanding machine
Multitool, GU 150 RM2H, serial number 051 000 6, Sanding machine, voltage: 380 V, sandband
width: 145 mm, machine size: 90x150xH 105 cm, provided with pipes of grinding installation,
adjustable in corners
1 Automatic vertical sanding machine
VG, T 200 K/B, year built 2003, serial number 0307309, Automatic vertical sanding machine,
electricity consumption: 12 Kw, voltage: 400 V, sandband size: 100x1900 mm, machine size:
140x90xH 230 cm, weight: 640 kg + 2 roletripods, bandsand width: 460 mm, adjustable in height
(assembled on concrete floor)
1 Column-type drilling machine
Erlo, TSR-25 , year built 2005, serial number 1631/7357, Column-type drilling machine, electricity
consumption: 12 Kw, voltage: 380 V, 65-3120 RPM, machine size: 55x65xH 210 cm
1 Bandschuurmachine
Floh, BSM 75, serial number 45-075-0264, Bandschuurmachine, stroomverbruik: 3 Kw, voltage:
400 V, bandbr.: 75 mm, machine afm.: 44x100xH 110 cm
1 Bandschuurmachine
8Multitool, GF7s, serial number 0348026, Bandschuurmachine, bandbr.: 75 mm, v.v. 'Multitool'
draaimanipulator - type: 75c, machine afm.: 80x140xH 110 cm
1 2-steensslijpmachine
Creusen, 2-steenslijpmachine, op kolomvoet, voltage: 230 V
1 Stationary air compressor
Atlas Copco, LE, Stationary air compressor, on 250 l, pression boiler, voltage: 380 V, provided with
an air dryer - type: FD 15, size: 180x75xH 140 cm
1 Drum met koelvloeistof
Blaser, Blasocut BC20, Drum met koelvloeistof, 208 l, op metalen uitlekbak, afm.: 77x72xH 40 cm
1 Composed welding table
Composed welding table, perforated, size: 300x150xH 85 cm + 18 clamping collet chucks + 5
varied clamping blocks
1 Wandstroomhaspel
Zeca, 6185/PRO, Wandstroomhaspel, 3G 2,5, 15Lm
1 Wand persluchtslanghaspel
Zeca, 813/B, Wand persluchtslanghaspel, diameter 8 mm, lengte: 12 m, 12 bar
3 Diverse kasten
Diverse kasten, metaal, 2-deurs + inhoud: diverse montagematerialen, schuurmaterialen, rvs
montagematerialen + diverse kokers lastoevoegmateriaal
1 Wand persluchtslanghaspel
Zeca, 813/B, Wand persluchtslanghaspel, diameter 8 mm, lengte: 12 m, 12 bar
1 Wand stroomhaspel
Zeca, 6185/PRO, Wand stroomhaspel, 3G 2,5, 15Lm
1 Wandpersluchtslanghaspel
Zeca, 813/B, Wandpersluchtslanghaspel, diameter 8 mm, lengte: 12 m, 12 bar
1 Wand stroomhaspel
Zeca, 6185/PRO, Wand stroomhaspel, 3G 2,5, 15Lm
1 Wand persluchtslanghaspel
Zeca, 813/B, Wand persluchtslanghaspel, diameter 8 mm, lengte: 12 m, 12 bar
1 Wand stroomhaspel
Zeca, 6185/PRO, Wand stroomhaspel, 3G 2,5, 15Lm
Lot
Number Description
21
22
23
24
25
50
51
Combination 50 - 51
52
53
54
1 Werktafel
Rvs werktafel, met bankschroef, afm.: 265x125xH 85 cm + 2 rvs werktafels, houten werkblad,
265x122xH 86 cm, 245x122xH 86 cm + 1 metalen werktafel, houten werkblad, 240x118xH 92 cm
4 V-steunen
Ridgid, V-steunen, in hoogte verstelbaar + 1 rolstatief
4 2-deurskasten
Houten 2-deurskasten, met legborden + 1 4-deurskast + 6 diverse tafels + 7 diverse ladenblokken +
1 open rvs kast (op aanwijzing TW) + 1 2-ladenblok + 1 4-ladenkast + 1 bureautafel met kruk
1 Diverse reftermeubelen
Diverse reftermeubelen, zijnde: rvs tafel, houten blad + 2 bureautafels + 5 diverse stoelen + 1
materiaalkast, metaal + 1 koelkast + 1 "Mouliner" oventje + 1 koffiezet + 1 3-ladenblok (inhoud
refter)
4 Rollerstatieven
Rvs rollerstatieven, zonder voet + 2 rolgeleiders
1 Slide lathe
Tos, SUL 125/3000, serial number 525 300 89 0004, Slide lathe, center distance: 3000 mm,
spindle drain: 90 mm, distance center to bed: 700 mm, size machine: 600x160xH 165 cm, weight
machine: 11 750 kg, provided with: 3-chuck and 4-chuck, 1 solid seat, Sony X-Y digital outreader,
varied centerpoints, varied chisel consolidator + mobile cupboard with drawers, with tools, excl.
worktable
1 2-deurskast
2-deurskast, metaal, met inhoud: draaibankbeitels + draaibankgereedschap
1 Bedfreesmachine
Nicolas Correa, A25-30, year built 1990, serial number 9252614, Bedfreesmachine, electricity
consumption: 25 Kw, 20 - 25000 RPM, tools insertion: ISO 50, system: heidenhain, X: 3000 mm, Y:
1200 mm, Z: 1000 mm, provided with: T-notch on clamping table: 3500x1000 mm, toolstorage with
30 positions, 4th axis + manuals + mobile 2-doorscloset with tools and rigging material + worktable
with tools and rigging material
1 Mobiele kar met freesgereedschappen
Mobiele kar met freesgereedschappen, ISO 50 + divers opspanmateriaal + metalen rails met
diverse freezen, ISO 50
1 8-Ladenkast
Huni, 8-Ladenkast, metaal, 72x72xH 103 cm + inhoud: diverse freezen
Combination 52 - 54
55
56
57
58
1 Slide lathe
Harrison, M550 GH, year built 1996, serial number SM 0069, Slide lathe, center distance: 2000 mm,
max. turn diam. 250 mm, culvert main spindle, electricity consumption: 9,3 Kw, voltage: 380 V,
machine size: 360x130xH 150 cm, provided with: Heidenhain, digital outreader, 18 - 1400 RPM +
solid and free seat + 2 tables + 1 closet with varied tools
1 Machining center
Deckel-Maho, DMC 104V linear, year built 2006, serial number 2911 000 3954, Machining center,
CNC-controlled, 3D, X: 1040 mm, Y: 600 mm, Z: 500 mm, 12000 RPM, machine size: 330x225xH
320 cm, provided with: toolcenter with 30 positions, tools insertion: ISO 40, T-clamping table:
1250x750 mm, 3 clamping collet chucks, system: Heidenhain TNC 530, Interlift cooling filter, ikf
400/3300
1 Rolluikkast
Rolluikkast, metaal + inhoud: ca 32 metaalbewerkingsgereedschappen, sturing: ISO 30 + diverse
ruimers e.d.
1 Kast
Bott, Kast, 13 laden, metaal, 113x76xH 126 cm + inhoud: metaalboren, draad tappen, manuele
draadsnijsets
Combination 56 - 58
59
1 Machining center
Deckel-Maho, DMU 100T, year built 2000, serial number 1114 00 000 33, Machining center, CNCcontrolled, X: 1080 mm, Y: 710 mm, Z: 710 mm, consumption electricity: 15 Kw, max. 12000 RPM,
Lot
Number Description
60
61
toolcarousel with 32 positions, provided with: system: Heidenhain mill plus, T-clamping table:
1500x800 mm, tool insertion: ISO 40
1 Ladenkast
Bedrunka-Hirth, Ladenkast, 7 laden, metaal, 70x74xH 102 cm + inhoud: boren, frezen, ruimers
1 Ladenkast
Bedrunka-Hirth, Ladenkast, 7 laden, metaal, 70x74xH 102 cm + inhoud: boren, frezen, ruimers,
beitelmessen
Combination 59 - 61
62
63
64
1 CNC-lathe
Gildemeister, NEF 520, year built 2003, serial number 015/10004221, CNC-lathe, diam. bed above
500 mm, diam. crosswise plate 290 mm, crosswise movement 260 mm, center distance 1350 mm,
spindle hole 70 mm, spindle insertion metr. 80 mm, electricity consumption 12 Kw, 40 - 3000 RPM,
provided with: system Heidenhain CNC, size machine 340x195xH 183 cm, weight +- 3100 kg +
manuals
3 Kasten
Kasten + 1 tafel + 2 mobiele tafels met inhoud: snelwisselaars/gereeschapshouder + klauwbekken
+ centerpunten + beitels
3 Diverse vaste brillen
Gilde Meister, Diverse vaste brillen
Combination 62 - 64
65
66
1 CNC-lathe
Mazak, 250 MS Super quick-turn, year built 1999, serial number 142 465, CNC-lathe, max. curve
diam. 300 mm, max. curvelength 500 mm, electricity consumption 22 Kw, max. 4000 RPM, 12 tool
positions, toolspeed 4500 RPM (3,7 Kw), size machine 290x170xH 220 cm, size barfeeder
200x140xH 140 cm, provided with: system: Mazatrol, 640 T + LNS barfeeder, quick-load, serco II +
saving unit
1 Diverse opspan- en verspaangereedschappen voor draaibank
Diverse opspan- en verspaangereedschappen voor draaibank + diverse klauwplaatbekken, incl.
werktafel
Combination 65 - 66
67
69
70
71
72
73
74
75
76
1 Draadtapstation
Trade Max, Draadtapstation, pneumatisch, incl. 8 tapkoppen, gemonteerd op metalen tafel
1 2-steens slijpmachine
Metabo, 2-steens slijpmachine, op kolomvoet, voltage: 380 V, 2800 RPM
1 Bandschuurmachine
Flott, BSM 75, serial number 50371005 055, Bandschuurmachine, stroomverbruik: 3 Kw, voltage:
400 V, band afm.: 75x2000 mm
1 Electro-hydraulic press
Bernardo, HWP 60, year built 2006, serial number 06/P0113, Electro-hydraulic press, cap. 60
barrel, electricity consumption 1,5 Kw, voltage 400 V, weight 685 kg + closet with tools
1 Edm machine
TopEdm, DM 7040, year built 1990, serial number NV 90002 NU, Edm machine, X: 400 mm, Y:
300 mm, Z: 200 mm, size machine 130x120xH 220 cm, provided with: system: TopEdm TP-50 +
Heidenhain X-Y-Z-outreading + T-clamping plate 700x400 mm + closet with accessories
1 Surface grinder
Freeport, SGS-1632 AHD, year built 1990, serial number 900457-2, Surface grinder, voltage: 400
V, size machine 250x180xH 210 cm, provided with: magnetic clamping table
1 Strong-armed shaving machine
Butter, Strong-armed shaving machine, vertical, voltage: 440 V, provided with: turning table with Tnotches, diam. 770 mm (+ partially on 2 pallets), size machine 190x320xH 260 cm (partially
assembled)
1 Surface grinder
Blohm, Simplex, serial number 2319, Surface grinder, size machine 210x170xH 200 cm, provided
with: magnetic chuck 700x300 mm
1 Slide lathe
Progres, I-820, Slide lathe, center distance 7000 mm, spindle drain 100 mm, distance center to
Lot
Number Description
77
bed 650 mm, size machine 1000x125xH 210 cm, provided with: inverter + 4-chuck diam. 1230 mm
1 Partij toebehoren voor draaibank
Partij toebehoren voor draaibank, zijnde: 5 diverse klauwplaten, vaste- en meelopende brillen,
opspanmateriaal, diverse boren en ruimers, verpakt in houten kist, op 1 pallet
Combination 76 - 77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
1 Slide lathe
Chin-Hung, year built 1987, serial number HS 87350, Slide lathe, center distance 1600 mm,
distance center to bed 230 mm, spindle drain 55 mm, size machine 285x100xH 130 cm, voltage:
380 V + rack with varied tools
1 Punching machine
Peddinghaus, Peddiworker 800, serial number 40627 572 89033, Punching machine, max. cap.:
800 kN, voltage: 380 V, size machine 70x140xH 175 cm
1 Rollenbaan
Rollenbaan, in hoogte verstelbaar, voltage: 380 V, v.v.: 14 rollen, rolbreedte: 400 mm, tafellengte:
5100 mm, max. h: 1150 mm
1 Punching machine
Peddinghaus, Peddiworker 400, serial number 4062089386015, Punching machine, max. cap.: 400
kN, voltage: 380 V, size machine 60x120xH 165 cm
3 Diverse rollenbanen
Diverse rollenbanen: 12 rollen, rolbr.: 50 cm, L: 495 cm, H: 95 cm + 9 rollen, rolbr.: 40 cm, L: 390
cm, H: 103 cm + 5 rollen, rolbr.: 50 cm, L: 200 cm, H: 103 cm
1 Electro-hydraulic eccentric press
Genç, 60, year built 1992, serial number 432, Electro-hydraulic eccentric press, 5,5 HP, 380 F, size
machine 110x160xH 210 cm
1 Buizenplooimachine
Camga, Buizenplooimachine, electro-hydraulisch, v.v. voetbediening + 2-ladenkast met toebehoren
1 Bandschuurmachine
Multitool, CS 75, serial number 617039, Bandschuurmachine, bandbr.: 75 mm
1 Manuele plaat-profielschaar
Mubea, Manuele plaat-profielschaar + manuele pijpen uithoek schaar
1 Welding robot on vestibule
Cloos, Romat 76 S, year built 1990, serial number 5466801, Welding robot on vestibule, welding
unit: CK72/5TS robo-MAG, controlunit: rotrol, 2 welding manipulators (rotative), Cloos vestibule,
R76s/LVE10, year of construction 1990, sn, 11370, size vestibule L: 10000 mm H: 3800 mm +
Welda extern welding machine, eco 310 + floorplate
1 Robotcell
Cloos, Romat 76, year built 1996, serial number 538070, Robotcell, welding unit: CK 72/5,
controlunit: Rotrol + 2 welding manipulators (rotative) + Cloos extern welding machine, GLC 403
PA-TS + floorplate
1 Luchtcompressor
De Sutter, Luchtcompressor, op drukvoet, 380 V
1 Screw air compressor
Atlas Copco, GA30FF, year built 2006, serial number API295589, Screw air compressor, electricity
consommation: 30 kW, 40 HP, max. 7,3 bar, max. 2960 RPM, size machine 123x70xH 145 cm,
weight: 560 kg, provided with: integrated air dryer, pressure barrel cap. 500 l (disconnection by
instructions Troostwijk)
1 Inhaakatelierstelling
Inhaakatelierstelling, 5 legborden, 140x90xH 180 cm + inhoud: diverse kunststofprofielen +
teflonprofiel (excl. metaalprofielen)
1 Metalen kast
Metalen kast, 1-deurs, 95x60xH 225 cm + inhoud: diverse oliekeringen + diverse hijsbanden
1 Rvs werktafel
Rvs werktafel, gelast, 245x122xH 93 cm, v.v.: bankschroef (excl. inhoud)
1 Kolom met zwenkarm
Kolom met zwenkarm voor takel (excl. takel), (arm gedemonteerd), kolom H: 450 cm, arm L: 450
cm
Lot
Number Description
95
96
97
98
99
100
101
102
103
104
105
106
107
108
111
112
113
114
115
116
117
118
119
120
121
122
1 Kolom met zwenkarm
Kolom met zwenkarm v.v.: Meili elektrische kettingtakel, cap.: 250 kg, kolom H: 450 cm, arm L: 450
cm
3 Diverse werkstuk opspangereedschappen
Diverse werkstuk opspangereedschappen, 1 tegencenter, 3 klauwplaten, 3-beks verdeelapparaat
1 Werkbank
Werkbank, metaal, houten werkblad, afm.: 200x70xH 83 cm
1 Werkbank
Werkbank, metaal, houten werkblad, afm.: 190x75xH 92 cm, excl. inhoud, incl. tool boy
1 Wandslanghaspel
Zeca, Wandslanghaspel, diameter 8 mm, max. 12 m
1 Meettafel
Meettafel, natuursteenblad, buismetalen onderstel, afm.: 101x101xH 90 cm
1 Werkstuk opspanklem
Cuter, Werkstuk opspanklem, bekbreedte: 175 cm, max. afstand tussen de bekken: 420 mm
1 Werkstuk opspanklem
Cuter, Werkstuk opspanklem, bekbreedte: 175 cm, max. afstand tussen de bekken: 420 mm
1 Werkstuk opspanklem
Cuter, Werkstuk opspanklem, bekbreedte: 175 cm, max. afstand tussen de bekken: 420 mm
1 Werkstuk opspanklem
Werkstuk opspanklem, z.v.g.
1 Werkstuk opspanklem
Werkstuk opspanklem, z.v.g.
1 Magneetblok
Braillon, Magneetblok, voor werkstuk opspanning, afm.: 500x250 mm
1 Werkstuk opspanklem
Eron, Werkstuk opspanklem
1 Werkstuk opspanklem
Werkstuk opspanklem, z.v.g.
1 Hotairstorageheater
Virox, Hotair storageheater, voltage: 380 V, size 240x160xH 340 cm, provided with: fuel oil stoker
(excl. chimney)
1 Houten kantoorunit
Euro-Cabin, Houten kantoorunit, afm.: 600 x 250 x H 250 cm, gemonteerd op H-profielkader (excl.
kader) + inhoud: kantoormeubilair: 2 bureau's, 7 diverse kasten, 1 bijzettafeltje, 4 bureaustoelen
1 Electrokachelwandhaspel
Zeca, Electrokachelwandhaspel, 3C 2,5, 15 Lm
1 Electrokachelwandhaspel
Zeca, Electrokachelwandhaspel, 3C 2,5, 15 Lm
1 Electrokachelwandhaspel
Zeca, Electrokachelwandhaspel, 3C 2,5, 15 Lm
1 Electrokachelwandhaspel
Zeca, Electrokachelwandhaspel, 3C 2,5, 15 Lm
1 Electrokachelwandhaspel
Zeca, Electrokachelwandhaspel, 3C 2,5, 15 Lm
1 Wandpersluchtslanghaspel
Zeca, Wandpersluchtslanghaspel, diam. 8 mm, L. 12 mm, 12 bar
1 Profielstalen leestafel
Profielstalen leestafel, zwaar, met bankschroef, 209x104xH 82 cm
1 Hijsportaal
Hijsportaal, afm. 400x400xH ca. 600 cm + looprail ca. 500 cm + kettingtakel, elektrisch, aan loopcat,
voltage: 380 V, z.v.g.
1 Electrokachelwandhaspel
Zeca, Electrokachelwandhaspel, 3C 2,5, 15 Lm
1 Electrokachelwandhaspel
Zeca, Electrokachelwandhaspel, 3C 2,5, 15 Lm
Lot
123
124
125
126
127
128
129
130
250
251
252
253
254
255
256
257
258
Number Description
1 Wandpersluchtslanghaspel
Zeca, Wandpersluchtslanghaspel, diam. 8 mm, L. 12 mm, 12 bar
1 Electrokachelwandhaspel
Zeca, Electrokachelwandhaspel, 3C 2,5, 15 Lm
1 Mobiele profielstalen trap
Mobiele profielstalen trap, 10 treden, 1 plateau + leuning
1 Wandpersluchtslanghaspel
Zeca, Wandpersluchtslanghaspel, diam. 8 mm, L. 12 mm, 12 bar
1 Zware profielstalen lastafel
Zware profielstalen lastafel, met bankschroef, afm. 190x104xH 82 cm + metalen wandkast, plexiglas deur, afm. 113x30xH 120 cm
1 Rvs tafel/kast
Zeca, Rvs tafel/kast, v.v.: legbord, hekje, afm.: 300x70xH 91 cm
1 Electrokabelwandhaspel
Zeca, Electrokabelwandhaspel, 3G 1,5, 10 Lm
1 Electrokabelwandhaspel
Zeca, Electrokabelwandhaspel, 3G 1,5, 10 Lm
1 Stationwagon
Volkswagen, Passat, serial number WVWZZZ3CZBE033776, Stationwagon, diesel, 1st date of
circulation 08/2007, km on counter: 117 543 km, 1968 cc, electricity consommation: 100 kW, Euro:
4, 156 g/km, color: black, provided with: beige leather interior + GPS + airco + 5-spoke alu rims,
detachable towing hook + cruise control + P-sensors + documents + 2 keys
1 Sationwagon
Audi, A4, serial number WAUZZZBE98A158602, Stationwagon, diesel, 1st date of circulation
04/2008, km on counter: 74 955 km, 1968 cc, electricity consumption: 100 kW, Euro: 4, 154 g/km,
color: dark grey, provided with: black leather interior + GPS-Europe + airco + multifunctional
steering-wheel + detachable towing hook + cruise control + P-sensors + documents + 2 keys
1 Stationwagon Quattro
Audi, Q7 , year built 2007, serial number WAUZZZ4L67DO74478, Stationwagon Quattro, diesel,
1st date of circulation 02/2007, km on counter: 174 539 km, 2967 cc, electricity consumption: 155
kW, Euro: 4, 282 g/km, color: black, provided with: black leather interior + GPS-Europe + airco +
multifunctional steering-wheel + alu rims + detachable towing hook + cruise control + P-sensors +
documents + 2 key
1 Van
Ssangyong, Rodius, year built 2006, serial number KPTNOB1FS5P025917, Van, diesel, 1st date
of circulation 01/2006, km on counter: 193 411 km, 2696 cc, electricity consommation: 120 kW,
color= blue-grey, provided with: grey upholstered seats + radio-CD + airco + documents + 2 keys
1 Van
Mercedes-Benz, Sprinter , serial number WDB9036631R904892, Van, diesel, 1st date of
circulation 01/2006, km on counter: 110 382 km, 2149 cc, electricity consumption: 95 kW, Euro: 3,
provided with: towing hook + documents
1 Van
Mercedes-Benz, Sprinter , serial number WDB9036621R293705, Van, diesel, 1st date on
circulation 01/2002, km on counter: unknown, provided with: roofrack + towing hook + 1 key (excl.
Documents + doesn't start + crack in windscreen
1 Lichte vrachtwagen
Mercedes-Benz, Sprinter, year built 2002, serial number WDB9036631R348272, Lichte
vrachtwagen, diesel 313cdi, 1st date of circulation 02/2002, km on counter: unknown (+ 208 000
km), Euro: 3, provided with: towing hook + documents + 1 key
1 Van
Mercedes-Benz, Sprinter , serial number WDB9016611R197289, Van, diesel, 1st date of
circulation 11/2000, km on counter: 296 011 km, provided with: ladderrack + towing hook +
documents + 2 keys
1 Van
Mercedes-Benz, Vito , serial number WDF63809413555481, Van, 1st date of circulation 10/2003,
km on counter: 161 000 km, 2148 cc, diesel, Euro: 3, electricity consumption: 90 kW, color: white,
provided with: towing hook + documents (no keys)
Lot
259
260
261
262
263
264
265
266
267
268
Number Description
1 Van
Opel, Combo, year built 2004, serial number WOlOXCF2553014506, Van, diesel, 1ste date of
circulation 11/2004, km on counter: 79 617 km, 1248 cc, electricity consumption: 51 kW, Euro: 4,
143 g/km, (documents + 2 keys)
1 Van
Seat, Inca , serial number VSSZZZ9KZ2R016, Van, SDI diesel, 1ste date of circulation 11/2002,
km on counter: 140 000 km, 1896 cc, electricity consumption: 47 kW, 744 g/km, Euro: 2,
(documents + 1 keys)
1 Truck
Mercedes-Benz, Actros 2643, serial number WDB9502441K481621, Truck, 1st date of circulation
04/2000, km on counter: 790 217 km, MTM: 26 000 kg, 1st axis 7100 kg, 2nd axis 10 000 kg, 3th
axis 10 000 kg, tare 14 370 kg, provided with: plateaubarrel, size 670x250xH 100 cm + Atlas
loadingcrane, AK, type 170-1, construction year 2000 + Rockinger clutch, 400G 150 + sleeping
cabine + double rear axle (documents + 1 key)
1 Truck
Renault, M150 midliner, serial number VF640ACC000004380, Truck, 1st date of cirulation
02/1996, km on counter: 281 233 km, MTM: 11 990 kg, 1st axis 4300 kg, 2nd axis 8240 kg, tare
3820 kg, (documents + 1 key)
1 Trailer wagon
Weytens, Trailer wagon, 2 axis, restrained, size 190x410 cm (no documents)
1 Trailer wagon
Kerenzo, K3503, year built 2005, serial number 5K 1182, Trailer wagon, 3 axis, restrained, size
210x520 cm (1 missing wheel) (documents)
1 Telescopic handler
Manitou, MRT 2150 M-series turbo, serial number 175097513199, Telescopic handler, 1st date of
circulation 25/06/2004, on 750 975, weight 16 410 kg, electricity consumption: 97 kW, 21 m, 5000
kg, hours on counter 2813h, provided with: motor: Perkins 4 cylinders (registation voucher)
1 Man basket
Manitou, MRT 2150, year built 2004, serial number 658 942, Man basket, weight 965 kg, cargo max.
365 kg, size basket 225x120 cm, 2x broadable with 105 cm + 1 remote
1 Carriage plate
Manitou, PFB, year built 2005, serial number 709835, Carriage plate, L: 120 cm
1 Bucket
Manitou, Bucket, L: 245 cm
Combination 265 - 268
269
270
271
272
273
274
275
276
1 Over-top hydraulische kipbak
Wifo, Over-top hydraulische kipbank, inrijgleuven voor vorken, bakbr.: 200 cm
1 Stacker
Deawoo, D40 SC, Stacker, diesel, working hours on counter 3260, provided with: duplexmast,
mastH: 280 cm, forkliftL: 118 cm (1 key)
1 Stacker
Deawoo, D40 S, Stacker, on gas, hours on counter: unknown, provided with: duplexmast, mastH: +360 cm, forkliftL: 118 cm (excl. gas cylinder, doesn't start) (1 key)
1 Stacker
Deawoo, Stacker, on gas, working hours on counter: 8201, provided with: triplexmast, mast, H: 215
cm + side shift + forkL: 149 cm (1 key)
1 Stacker
Deawoo, G30S, year built 1998, serial number 99/003Z0, Stacker, on gas, working hours on
counter: 7566, provided with: triplex mast, mastH: 255 cm + forkL: 153 cm + double fronttires + side
shift
1 Set verlenglepels voor heftruckvorken
Set verlenglepels voor heftruckvorken, L: 300 cm
1 Hydraulisch transpallet
Hydraulisch transpallet, vorkL: 114 cm
1 Hydraulisch transpallet
Hydraulisch transpallet, vorkL: 114 cm
Lot
277
278
301
302
303
304
305
306
Number Description
1 Stacker
Deawoo, G30E, Stacker, on gas, working hours on counter: 5100, provided with: triplex mast,
mastH: 270 cm + side shift + forkL: 150 cm + double fronttires (in construction) (no key)
1 Heftruck
TCM, Heftruck, op gas, onderdelendrager
1 Point welding machine
Nimak, PMP 6-2/100, serial number 960128, Point welding machine, Smax: 272 Kva, voltage: 400
V, 50 Hz, opening: 240-540 mm, footcontrol, provided with: conveyor, conveyor width: 390 mm,
length: 600 cm
2 Buisstalen
Buisstalen, oplegframes, afm.: 622x200xH 26 cm
1 Rollenbaan
Rollenbaan, rolbr.: 500 mm, L: 400 cm, H: 100 cm
1 Press brake
Haco, PPH 40135, year built 1986, serial number 51158, Press brake, max. cap. 135 t., brakewidth:
4100 mm, voltage: 380 V, 50 Hz, distance between supports: 3590 mm, provided with: footcontrol
+ incl. V-blocks and brake knifes on the machine + armrack
1 CNC-press brake
LVD, PPEH 220/42 CAU-CNC, year built 1999, CNC-press brake, max. cap. 220 t., brakewidth:
4200 mm, distance between supports: 3820 mm, size V-blockholder: 4510 mm, controlsystem:
LVD with footcontrol - type: CADMAN CNC - 400 V - 50 Hz - 27 kW, incl. V-blocs and brake knifes
on the machine
1 Lot divers V-blocks and brake knifes
Lot divers V-blocks and brake knifes, in 3 toolsetups + stackcontainer with wooden packaging (incl.
racks)
Combination 305 - 306
307
308
309
310
311
312
313
314
315
1 Hydraulic cross-out shear
LVD, HST-C 40/13 ELGO 85, year built 1996, serial number 23109, Hydraulic cross-out shear,
max. cap. 863 KN, cutting width 4100 mm, electricity consumption 21 Kw, voltage 400 V, 50 Hz,
provided with: footcontrol
9 Stapelplateau's
Stapelplateau's, afm. 2600x1500 mm
1 CNC pons-nibbelmachine
LVD, Omega, CNC pons-nibbelmachine, max. plaatdikte: 6,4 mm, max. plaatafm. 2000x4000 mm,
max. cap. 25 ton, v.v.: turret met 20 gereedschapsposities, indexerend + max ponsdiam. 90 mm +
Siemens sturing
1 HD plasma profile burner
Microstep, HSP 3001, 20P, year built 2008, HD plasma profile burner, size table: 3200x2130 mm +
Kjellerberg, plasma powersource, type: HiFocus 280 i plus - incl. plasma gaz adjustunit, type: PGE
3-360 + Kjellerberg plasma fire button, type: percut 370, max. cutting thickness with percut 370.1:
50 mm, max. cutting thickness with percut 370.2:80 mm + Kjellerberg plasma burner closing unit,
type: PBA-360 + Kjellerberg cooling unit, type: KWE 360 + incl. control system on electro box and
ball table
1 CNC profile burner
Staco, Magnum, year built 1999, serial number 900451, CNC profile burner, size table: 6200x2500
mm, banisterlength: 8500 mm, Hypertherm mobile plasma burner, type: max 100 + incl. conveyor,
desk, PC
1 Stofafzuiging
Fat, Stofafzuiging, bestaande uit 1 exhauster, met motor + gegalvaniseerde buizen en Flexibal
1 Air compressor
Abac, Genesis 1510 (GE15), year built 2000, serial number UN015674G, Air compressor, work
pressure: 10 bar, 400 V, 50 Hz, 11 kW, on pressure barrel, cap. 500 Lt, weight: 400 kg
1 Partij diverde brandkoponderdelen
Partij diverde brandkoponderdelen, met grijpbakwagen + buisstalen tafeltje
1 Profielstalen tafel
316, Profielstalen tafel, 1925x1035xH 820 mm, bladdikte: 7mm, v.v. bankschroef, incl. 2-deurs
wandkastje
Lot
316
317
318
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
400
401
Number Description
1 Shear
Fasti, serial number 695 9006, Shear, max. cap. 2050x3 mm, weight: 2 t., 380 V
1 Elektrische 3-rollenbank
Bombled, 23H, serial number 45504, Elektrische 3-rollenbank, max. cap. 2000x3 mm
1 Mechanische vingerplooibank
VH 2500x2, serial number 4662775, Mechanische vingerplooibank, max. cap. 2500x2 mm, 3 mm
bijzetlengte 700 mm
1 Iron profile lifting installation
Iron profile lifting installation, L: 180 cm, provided with: 2x Bus raisemagnets on batteries, BM3O,
construction year 2001, max. cap. 1350 kg/magnet, stairless adjustable 0 -> 100 % + tripod
1 Heftruckmast
Volcke, Heftruckmast, tiplexmast, mastH: 240 cm + vorkenbord (excl. vorken), op 2 palletten
1 Profielstalen hijsbalk
Profielstalen hijsbalk, met inrijgleuven voor vorken, balkL: 300 cm
1 Profielstalen hijsevenaar
Profielstalen hijsevenaar, 2 hijspennen, L: 630 cm
3 Diverse profielstalen hijsevenaars
Diverse profielstalen hijsevenaars, L: 200-250 cm
1 Profielstalen hijsevenaar
Profielstalen hijsevenaar, L: 480 cm
1 Profielstalen hijsevenaar
Profielstalen hijsevenaar, v.v.: 2 hijsogen + inrijgleuven van vorken, L: +- 600 cm
1 Profielstalen hijsevenaar
Profielstalen hijsevenaar, L: +- 800 cm
1 Profielstalen hijsevenaar
Profielstalen hijsevenaar, L +- 1000 cm
2 Profielstalen hijslepels
Profielstalen hijslepels
4 Swivelling colomn cranes
Swivelling colomn cranes + 1 Hitachi chain hoist, max. cap. 500 kg
1 Electro-hydraulic punching bench
Electro-hydraulic punching bench, provided with: 5 punching units + 1 conveyor + 1 hydraulic
pumpunit
1 Hydraulische pers
Hydraulische pers, eigen fabricaat + werkbaan (excl. roller) (excl. hydraulische pomp)
5 Alu flessenstatieven
Alu flessenstatieven, voor brander, v.v.: hijsoog
1 Scissors lift
Trepel, EH 60/9, year built 1983, Scissors lift, max. cap. 2,5 t., size 120x400 cm
1 Scissors lift
Trepel, EH 60/9, year built 1983, Scissors lift, max. cap. 2,5 t., size 120x400 cm
1 Electric welding manipulator
Electric welding manipulator, beamlength: 300 cm + 5 rollbarrels, L: 170 cm
1 Bandplooi-ijzer
Bandplooi-ijzer, kolomvoet
2 Grote banden
Grote banden, op velg, z.v.g.
1 Automatic drilling line
Automatic drilling line, exists of: 1 Behringer automatic band saw, type: HBP 530-704 G,
construction year: 2000, serial number 400 283, with remote control + 1 2-pieces iron profile supply
roller conveyor: L: 1x 2700 mm, 1x 6350 mm, sandband size 1100 mm + 1 iron profile electric
supply, roller conveyor: L: 6700 mm, sandband size 1100 mm + 1 iron profile electric supply, roller
conveyor: L: 6100, sandband size 1100mm
1 CNC-controlled drilling system
Voortman, V613A, year built 2002, serial number Aydrospex hydraulische groep type 100, CNCcontrolled drilling system, pressure: 160 - 100 bar, 3 kW, oil T46, toolsswitcher, 6 tools, remote
Lot
Number Description
control with ICP touch screen + 2 iron profil electric roller conveyors, L: 6100 mm, rollwidth: 1100
mm + additional table for conveyor
Combination 400 - 401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
1 Band saw
Bomar, STG 240 DG, year built 2002, serial number 3086, Band saw, 3x 400 V, TN-CS, 50 Hz, 16
A, saw plate 2910x0,9x25(27) mm, provided with: material collet chuck, conveyor: L: 5000 mm,
rollwidth: 700 mm, roller conveyor: L: 6000 mm, rollwidth: 500 mm, provided with a
lengthconfiguration
1 Band saw
Behringer, HBP 260/340/420, year built 1989, serial number 1289204, Band saw, 400 V, pneumatic
collet chuck, provided with: (roller) conveyor, 2x L: 10 m, rollwidth: 53 cm, diam. 150 mm
1 Sawing machine
Elsele, PSU - Hydr. Type nr. 470, year built 1988, serial number 1324, Sawing machine, 380 V, 12
A, 50 Hz, 10/20 N (min -1), provided with: (roller) conveyor, 2x L: 6000 mm, rollwidth: 530 mm,
diam. 150 mm
1 Sawing machine
Elsele, PSU - Hydr. Type nr. 470, year built 1988, serial number 1350, Sawing machine, 380 V, 12
A, 50 Hz, 10/20 N (min -1), provided with: (roller) conveyor, 2x L: 6000 mm, rollwidth: 530 mm,
diam. 150 mm
1 Automatic band saw
Behringer, HBP 413 A, year built 2005, serial number 305145, Automatic band saw, provided with:
hydraulic collet chuck, remote controller, (roller) conveyor, L: ca 10 m, rollwidth: 700 mm + 1 iron
profile conveyor, L: 3000 mm, rollwidth: 530 mm, diam. 150 mm
1 Ironworker
Peddinghaus, Peddingmaster 60/100 H, serial number 44423052287017, Ironworker, max. cap.
600 Kn, 380 V, provided with: iron profile conveyor, L: 7000 mm, rollwidth: 50 cm
1 Ironworker
Sunrise, IW-80 SD, year built 2005, serial number 348666, Ironworker, 380 V, 50 Hz, provided with:
automatic belt conveyor + Tigerstop configuration T6.8L, 10 A, construction year 2006
2 Profielstalen mobiele atelierwagens
Profielstalen mobiele atelierwagens + diverse ponsen
1 Tool grinding machine
Cuoghi Affilatrici, APE 40, year built 2001, serial number 401219, Tool grinding machine, 380 V, 50
Hz, 1 kW, 25 A, 2800 t/m, weight: 170 kg + adjustable toolholder
1 Bandschuurmachine
FBM, Bandschuurmachine, 380 V, bandL ca 2000 mm, br. 70 mm
1 Band saw
FMB, ZEUS, serial number 30510, Band saw, 380 V, 50 Hz, saw plate: 3180x25x0,9 mm + collet
chuck, conveyor
1 Tig-welding machine
Lincoln, Invertec V205T AC/DC, Tig-welding machine, cooled for alu + iron trolley
1 Semi-automatic welding machine
Esab, Aristo MIG 500, serial number 524-609-7947, Semi-automatic welding machine, 500 A +
Esab Aristo Feed 30-4 wire thruster
1 Semi-automatic welding machine
Esab, Aristo MIG 400, serial number 322-337-3743, Semi-automatic welding machine, 400 A +
Esab Aristo Feed 48 wire thruster
1 Semi-automatic welding machine
Esab, ESAB MIG 405 W, serial number 246-421-1452, Semi-automatic welding machine, 400 A,
400 V + Esab Feed 30-4 wire thruster
1 Semi-automatic welding machine
Esab, MIG 500 tW, serial number 627-735-5801, Semi-automatic welding machine, 500 A, 400 V +
Esab Feed 484 wire thruster
1 Semi-automatic welding machine
Esab, MIG 500 tW, serial number 627-734-5708, Semi-automatic welding machine, 500 A, 400 V +
Esab Feed 484 wire thruster
Lot
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
Number Description
1 Halfautomaat lasmachine
Esab, ESAB MIG C280, serial number 225-549-4221, Halfautomaat lasmachine, 280 A, 400 V (niet
volledig)
1 Lasmanipulator
Esab, 250 AHMA, serial number A9895, Lasmanipulator, max. cap. 2500 kg, 400 A, 0,3 KVA, 230
V, 50 Hz
1 Semi-automatic welding machine
Welda, IC 400, serial number 007607, Semi-automatic welding machine, with wire thruster, Welda
400 A
1 Semi-automatic welding machine
Selco, Unistep 410, year built 1998, serial number 122561, Semi-automatic welding machine, 410
A, 400 V, Selco wire thruster WF200
1 Semi-automatic welding machine
Selco, Unistep 410, year built 1999, serial number 125067, Semi-automatic welding machine, 410
A, 400 V, Selco wire thruster WF200
1 Semi-automatic welding machine
Welda, IC 400, year built 1987, serial number 5287, Semi-automatic welding machine, 400 A, 400
V, with wire thruster
1 Lastoestel
Welda, IC 400, year built 1985, serial number 003311, Lastoestel, halfautomatisch, 400 A, 400 V,
met draadstuwer
1 Lastoestel
Welda, Sistor 120, Lastoestel, halfautomatisch (excl. draadstuwer)
1 Halfautomaat lastoestel
Esab, LUD 320W, serial number 852-916-2378, Halfautomaat lastoestel, 320 A, 400 V, Esab
draadstuwer MEK4C
1 Lastoestel
Cerdi, 250 GTS, Lastoestel, halfautomatisch, 250 A, 400 V
1 Lastoestel
Cerdi, 250 GTS, Lastoestel, halfautomatisch, 250 A, 400 V
1 Lastoestel
Cerdi, 250 GTS, Lastoestel, halfautomatisch, 250 A, 400 V
1 Welding machine
Lastek, LASWING 250, Welding machine, for alu, AC DC, 400 V, cooling system - type cc33
1 Lastoestel
SAF, SAFMIG 340 BL, serial number 69858, Lastoestel, halfautomatisch, 220/380 V, 340 A, met
draadstuwer SAF
1 Lastoestel
SAF, 380 DBL SAFMIG, serial number 17553, Lastoestel, halfautomatisch, 220/380 V, 380 A, met
draadstuwer SAF
1 Lasautomaat MIG-MAG
Cloos, GLC 403 PA-TS, year built 1990, serial number 5000, Lasautomaat MIG-MAG, 400 A, 380
V (niet volledig)
1 Lasautomaat
Cerdi, GT 250, Lasautomaat, 230/400 V, z.v.g. (niet volledig)
1 Elektroden lastoestel
Einhell Compact, Elektroden lastoestel, draagbaar, 170 A, 220/380 V
1 Stroomomvormer
Bosch, RU 13277.5-278 TS, Stroomomvormer, ingang 400 A, uitgang 135 V, 2900 t/m 7,5 KVA,
op mobiel wagentje
1 Dubbele flessenwagen
Dubbele flessenwagen, buisstaal, met branderset, leidingen, drukmeters
1 Lasmanipulator
Sartore, Lasmanipulator, 220 V
1 Afschuimmachine
Evsa, CHP-10, year built 1996, serial number 4527, Afschuimmachine, op stalen kader, spanen
Lot
Number Description
441
1
442
1
443
1
444
1
445
1
446
1
447
1
448
1
449
1
450
1
451
1
452
1
453
1
454
2
455
1
456
1
457
1
458
1
459
1
460
1
461
1
462
1
463
2
464
1
opvanglade
Bandschuurmachine
Ogrit, GS 75, serial number 6170 22, Bandschuurmachine, 3x 380 V
Bandschuurmachine
BM, 332453, Bandschuurmachine, 3x 380 V
Bandschuurmachine
BM, 332453, Bandschuurmachine, 3x 380 V
Bandschuurmachine
Anma, BV 20-75-MS, Bandschuurmachine, 3x 380 V, band 3000x75 mm, diam. 200x75 mm, 34
m/s
Machinetransporter
Gics, L18, Machinetransporter, met trekstang, max. cap. 18 ton + 2 opneembare machine
transportrollers
Draaimanipulator
Draaimanipulator, electro-motorisch aangedreven, 380 V
Mobiele verfspuitpomp
Mobiele verfspuitpomp
Dubbele flessenwagen
Dubbele flessenwagenn buisstaal, v.v.: brander, leidingen, nanometer
Dubbele flessenwagen
Dubbele flessenwagen, buisstaal, v.v.: rubber banden
Dubbele flessenwagen
Dubbele flessenwagen, buisstaal, v.v.: slangen, nanometers
Dubbele flessenwagen
Dubbele flessenwagen, profielstaal, volle rubber banden
Aandrijfmotor
Nord, SK 7382 AF VL2-132 M/4, serial number 100644548800, Aandrijfmotor, I = 162,17 H5, n2 =
8,9 min-1, motor 7,5 kW, 400/690 V
Aandrijfmotor
Aandrijfmotor, elektrisch aangedreven, 400 V
Kettingtakels
Hitachi, 1/AF, serial number 2320-2321, Kettingtakels, elektrisch, max. cap. 250 kg, lift 3m, 220/415
V, 3-fasig (excl. bediening)
Kettingtakel
Hitachi, 1/2 BF, Kettingtakel, elektrisch, max. cap. 500 kg, lift 3 m, 220/415 V, 3-fasig, incl.
bedieningspeer
Kettingtakel
Hitachi, 1/2S2, Kettingtakel, elektrisch, max. cap. 500 kg, lift 3 m, 220/415 V, 3-fasig, incl.
bedieningspeer
Kettingtakel
Hitachi, 1/2S2, Kettingtakel, elektrisch, max. cap. 500 kg, lift 3 m, 220/415 V, 3-fasig (excl.
bedieningspeer)
Partij verlengkabels
Partij verlengkabels, 220/400 V, op 2 palletten, v.v.: stekkers
Partij verlengkabels
Partij verlengkabels, 400 V + electrokabel 220 V, op pallet met opzetrand, v.v.: stekkers
Werfstroom verdeelkast
Werfstroom verdeelkast, 4x 220 V, 2x 380 V
Werfstroom verdeelkast
Werfstroom verdeelkast, 6x 220 V, 2x 380 V
Werfstroom verdeelkast
Werfstroom verdeelkast, 6x 220 V, 2x 380 V
Afrolhaspels
Afrolhaspels, bindlint: 1x metaalling, 1x nylonlint + rol plastiek folie
Mobiele atelierwagen
Facom, XL Chrono, Mobiele atelierwagen, 8 laden, v.v.: divers handgereedschap
Lot
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
Number Description
1 Mobiele atelierwagen
Facom, XL Chrono, Mobiele atelierwagen, divers handgereedschap
1 Mobiele atelierwagen
Chrono Jet, Mobiele atelierwagen, 8 laden + divers handgereedschap
1 Mobiele atelierwagen
Stack-On, Mobiele atelierwagen + inhoud
1 Mobiele atelierwagen
Stack-On, Mobiele atelierwagen + inhoud
1 Gereedschapswagen
Gedore, adjutant 1580, Gereedschapswagen + divers handgereedschap
1 Partij diverse hijsbanden/spanners
Partij diverse hijsbanden/spanners, liggend op pallet met opzetrand
1 Partij diverse hijsbanden
Partij diverse hijsbanden, liggend op pallet
1 Partij diverse hijsbanden
Partij diverse hijsbanden, liggend op pallet
1 Partij diverse bouten en moeren
Partij diverse bouten en moeren, w.o.: DIN 1151B 5,5x150 mm + DIN 933 M12x60, M16x60, in
houten bak
1 Partij bouten en moeren
Partij bouten en moeren, w.o.: verankeringsbouten VKT 16x150, 12x135, liggend op pallet
1 Partij zeskantkopbouten
Partij zeskantkopbouten, 20x100, DIN 933 Z/P, in 7 kartons op pallet
1 Partij diverse bouten, moeren en rondellen
Partij diverse bouten, moeren en rondellen, in 3 pvc bakken en kartons, liggend op pallet
1 Partij diverse bouten, moeren en rondellen
Partij diverse bouten, moeren en rondellen, afgekort, in houten bak
1 Partij lasdraad
Esab, Partij lasdraad, in 14 kartons + aangebroken rollen, w.o.: OK autorod 1251, diam. 1,0 mm +
1632, diam. 0,8 mm + 1413, diam. 1,2 mm
1 Laselektroden
Esab, Laselektroden + esab lastoevoegsel, liggend op pallet met opzetrand
10 Drukregelaars
Tornado 2000, Drukregelaars, in verpakking + diverse onderdelen, liggend op pallet met opzetrand
1 Partij diverse koppelstukken
Partij diverse koppelstukken, w.o.: bochten T-stukken + verbindingsstukken, in plaatstalen stapelbak
9 Diverse metaalzaagbladen
Diverse metaalzaagbladen, w.o.: 6x diam. 960 mm, asgat 100 mm + 1x diam. 940 mm, asgat 100
mm + 2x diam. 980 mm, asgat 100 mm
1 Hydraulische klem
Meyer, 6-241 2N, Hydraulische klem, voor manitou verreiker, max. cap. 6000 N, 120 bar werkdruk,
gedemonteerd op pallet
1 Floor cleaning machine
RCM, Jumbo 872, year built 2005, Floor cleaning machine, motorized, electric, 2700 W, 36 V,
charger RQ tron 220 V
1 Hot water high-pressure cleaner
Karcher, HDS 1295, Hot water high-pressure cleaner, max. 98°C, 400 V, 50 Hz, max. 185 bar 1 Vloerkuismachine
Advance, A178 1, serial number 298 250, Vloerkuismachine
1 Manuele vloerveegmachine
Kanzle, Manuele vloerveegmachine, 2x2
1 Mobiele lasdampafzuiger
Nederman, year built 2002, serial number 641-12600541, Mobiele lasdampafzuiger, 230 V, 50 Hz,
900 W
1 Welding machine
Esab, KHM 190 YS, Welding machine, YANMAR dieselmotor, 190 A
Lot
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
Number Description
1 Mobiel elektroden lastoestel
Cerdi, 300 RC, Mobiel elektroden lastoestel, 300 A, 400 V
1 Lastoestel
Lincoln, Thyrotic 220 AC/DC, Lastoestel, 210 A, 220/380 V, 50 Hz
1 Plasma brander
Hypertherm, Powermax 1650 , serial number 1650004815, Plasma brander, G3 series, 100 A, 140
V, max. 8 bar
1 Halfautomaat lastoestel
Lincoln, NORWELD NRC-301, serial number 098 86 79, Halfautomaat lastoestel, elektrisch,
draadstuwen WF 12-N3, 300 A, 220/500 V (excl. lastoorts)
1 Halfautomaat lastoestel
Lincoln Smitweld, NORWELD NRC-500, Halfautomaat lastoestel, met draadstuwen WF-N1, 500 A,
380 V (excl. lastoorts)
1 Semi-automatic welding machine
Esab, MIG 500 tw, serial number 627-723-6327, Semi-automatic welding machine, wire thruster
Aristofeed 48, 500 A, 380-415 V, Pmax 3,5 bar (excl. welding torch)
1 Halfautomaat lastoestel
Esab, MIG 500 TW, serial number 627-735-5802, Halfautomaat lastoestel, draadstuwer te
repareren, 500 A, 380-415 V, Pmax 3,5 bar (excl. lastoorts)
1 Halfautomaat lastoestel
Welda, IC 400, serial number 6788, Halfautomaat lastoestel, met draadstuwer Welda, 400 A, 400 V
(excl. lastoorts, te repareren)
1 Halfautomaat lastoestel
Welda, IC 400, serial number 004810, Halfautomaat lastoestel, draadstuwer te repareren, 400 A,
400 V (excl. lastoorts)
1 Halfautomaat lastoestel
Welda, IC 400, serial number 004477, Halfautomaat lastoestel, draadstuwer te repareren, 400 A,
400 V (excl. lastoorts)
1 Halfautomaat lastoestel
Welda, IC 400, serial number 007086, Halfautomaat lastoestel, draadstuwer te repareren, 400 A,
400 V (excl. lastoorts)
1 Lastoestel
Selco, Unistep 410, serial number 125064, Lastoestel, 410 A, 400 V (excl. lastoorts en
draadstuwer)
1 Halfautomaat lastoestel
Selco, Unistep 410, serial number 129377, Halfautomaat lastoestel, 410 A, 400 V, met draadstuwer
WF 200 (excl. lastoorts)
1 Halfautomaat lastoestel
Welda, US 440, Halfautomaat lastoestel, WF 200 draadstuwer te repareren, 440 A, 400 V (excl.
lastoorts)
1 Halfautomaat lastoestel
Welda, IC 400, serial number 004805, Halfautomaat lastoestel, Selco WF 101 draadstuwer, 400 A,
400 V (excl. lastoorts)
1 Halfautomaat lastoestel
Welda, IC 400, serial number 002514, Halfautomaat lastoestel, 400 A, 400 V, te repareren
1 Plasma brander
Lincoln, INVERTEC-PC100, serial number 12011201647, Plasma brander, elektrisch, 400 V
1 Draagbare halfautomaat lastoestel
Lincoln, SP 170-I, Draagbare halfautomaat lastoestel, elektrisch, 30-170 A, 220 V
1 Draagbaar electrodenlastoestel
Rowac, Draagbaar electrodenlastoestel, 220 V, 130 A, 380 V, 200 A (excl. lastoorts)
1 Draagbaar lastoestel
EC, serial number 3171M, Draagbaar lastoestel, voor elektroden, 170 A, 230 V (excl. lastoorts)
1 Tafelkolomboormachine
Rexon, DP-330A, year built 2002, Tafelkolomboormachine, max. diam. 20 mm, 230 V, 600 W, 2102580 t/m
Lot
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
Number Description
1 Hogedrukreiniger
Bosch, Aquatak 110 Plus, Hogedrukreiniger, max. 100 bar, 230/240 V, 50 Hz, max 6,3 L/min, max.
40°C
1 Elektrische draadtrekmachine
Ridgid, 520, serial number 10371, Elektrische draadtrekmachine, voetbediening, 220 V, 900 W, 2560 Hz + toebehoren
1 Slakkenhuisventilator
Nederman, Slakkenhuisventilator, ABB motor, 380 V + slang
1 Slakkenhuisventilator
Euromate, MNF, Slakkenhuisventilator, 400/3 V, 50 Hz, 750 W + slang
1 Machinerolwagen
Wälzwagen, Express, Machinerolwagen, trekstang, in metalen koffer
6 Opneembare machinetransporters
Opneembare machinetransporters, 35x25 cm
1 Band afkort verstekzaag
Ferni, NG160, Band afkort verstekzaag, metaal, 230 V, 50/60 Hz, 30-80 t/min, zaagblad L 1735
mm, met materiaal klem
1 Band afkort verstekzaag
Hebes, TM 100V, year built 2003, serial number 300251, Band afkort verstekzaag, metaal, 230 V,
met materiaal klem
1 Tafelafkortcirkelzaag
Jepson, 9312, Tafelafkortcirkelzaag, 220 V, 50/60 Hz, 2000 W, 1500 t/m, blad 305x25,4 mm, met
materiaal klem
1 Mobiele tonstofzuiger
Wirbel, 829 Inox, serial number 050489, Mobiele tonstofzuiger, 230 V, 1000 W, 50 Hz (1 wiel
kapot)
1 Mobiele tonstofzuiger
Nederman, NIC 101, Mobiele tonstofzuiger, 220/240 V, 50/60 Hz, 1000 W
1 Tonstofzuiger
Ironside, IWD 150, year built 2002, serial number 330115, Tonstofzuiger, 1100 W, 240 V, 50/60
Hz
5 Kabelhaspels
Kabelhaspels, met electrokabel
1 Veiligheidsharnas
Tractel, Veiligheidsharnas, in pvc koffer
5 Metaalbandzagen
Wikus, Metaalbandzagen, 3660x27x0,90 mm, in verpakking
6 Metaalbandzagen
Phantom, Metaalbandzagen, 3180x27x0,9 mm
7 Metaalbandzagen
Junior, M42, Metaalbandzagen, 2900x27x0,9 mm
3 Metaalbandzagen
Metaalbandzagen, 1x L 584x55x0,9 mm, 2x L 584x40x0,9 mm
1 Mobiele omsnoerhaspel
Mobiele omsnoerhaspel, met bindtang
28 Dozen lasdraad
Esab, Dozen lasdraad, Autrod 1695 diam. 1 mm, 1695 max. 1,2 mm, Autrod 1651 diam. 1,2 mm,
op pallet
1 Partij diverse lasdraad
Partij diverse lasdraad, w.o.: Soudokay 1,6 mm + Shield-Bright 1,2 mm, 9 rollen in verpakking,
aangebroken rollen liggen op pallet
1 Partij laskabels, lastoortsen
Partij laskabels, lastoortsen, liggend op pallet met opzetrand
1 Grasmaaier
Grasmaaier, Briggs & Stratton 3,5 Hp benzine motor, maaibr.: 40 cm (excl. stopsel benzinetank)
1 Dubbele Steenslijpmolens
Lot
Number Description
535
1
536
1
537
1
538
9
539
5
540
1
541
1
542
1
543
1
544
1
545
1
546
2
547
2
548
1
549
1
550
3
551
2
552
1
553
1
554
2
555
2
556
2
557
5
558
3
559
1
560
2
561
1
Oertzen, D9 200, serial number 9100015, Dubbele Steenslijpmolens, 220/380 V, 2000 Hm,
steendiam. 200 mm
Werf-stroomverdeelkast
Werf-stroomverdeelkast, 4x 230 V, 4x 415 V, op gegalvaniseerd staander
Werf-stroomverdeelkast
Keraf, 859-24-4, Werf-stroomverdeelkast, P 600 VA, V 230-24 VAC, 50 Hz, 3AMP
Propaanfles
Propaanfles, ontspanner, snijbrander
Tipgrip hijsmanipulatoren
Tipgrip hijsmanipulatoren, met hijsoog
Diverse hijskettingen
Diverse hijskettingen, 3x L: 1 m, 1x L: 2 m, 2x L: 2 m
Tweesprong hijsketting
THK 4,5, Tweesprong hijsketting, 2x 2,5 t., L: 2 m, met tipgrip
Tweesprong hijsketting
THK 4,5, Tweesprong hijsketting, 2x 2,5 t., L: 2 m, met tipgrip
Tweesprong hijskettingen
Tweesprong hijskettingen, L: 150 cm + veiligheidshaken, kettinginkorthaken
Tweesprong hijsketting
Tweesprong hijsketting, L: 200 cm + veiligheidshaken + kettinginkorthaken
Tweesprong hijsketting
Tweesprong hijsketting, L: 270 cm + tweesprongketting, L: 1 m
Manuele ketting
Liftikus, year built 2003, serial number 1081106, Manuele ketting, takel, max. cap. 5 t.
Manuele kettintakels
Emce, Manuele kettintakels, max. cap. 3 t.
Manuele kettintakels
Elephant, c2, Manuele kettintakels, super 100, max. cap. 2 t.
Manuele kettingtakel
Liftikus, CHD, serial number 111830, Manuele kettingtakel, max. cap. 2 t.
Manuele kettintakel
Verlinde, Manuele kettintakel, Verlinde, max. cap. 2000 kg + Inter Exo manuele kettingtakel, max.
cap. 1 t.
Manuele kettintakels
Liftikus, CHD 0891, Manuele kettintakels, max. cap. 1 1/2 t.
Manuele kettintakels
Elephant, Super 100, Manuele kettintakels, max. cap. 1 t.
Rateltakel
Lever Hoist, year built 2001, serial number 996, Rateltakel, max. cap. 1,6 t.
Manuele kettintakel
Tralift, year built 2006, serial number T615201, Manuele kettintakel, max. cap. 1 t.
Manuele kettintakels
Elephant, Manuele kettintakels, max. cap. 0,5 t.
Manuele kettintakels
Elephant, Manuele kettintakels, max. cap. 0,5 t.
Diverse manuele kettingtakels
Diverse manuele kettingtakels, z.v.g.
Diverse stalen hijskabels
Diverse stalen hijskabels
Diverse loopkatten
Svero, 20164, serial number 25561, Diverse loopkatten, max. cap. 2 t.
Balkklem
Tractel, Corso, Balkklem, max. cap. 2 t., 75-250 mm + platen klem, z.v.g.
Buisstalen fleswagens
Buisstalen fleswagens, 1x: kunststof wielen, 1x: luchtbanden
Buisstalen platenkar
Lot
Number Description
562
1
563
2
564
2
565
1
566
1
567
1
568
1
569
1
570
1
571
1
572
1
573
1
574
1
575
1
576
1
577
1
578
1
579
1
580
1
581
1
582
1
583
1
584
1
Buisstalen platenkar, op luchtbanden + buisstalen plateau wagentje met duwbeugel
Buisstalen plateaukar
Buisstalen plateaukar, 3-wiels, opstaande zijwanden, plateau 75x113 cm
Profielstalen plateaukarren
Profielstalen plateaukarren, afm.: 90x60 cm + duwbeugel
Profielstalen plateaukarren
Profielstalen plateaukarren, afm.: 90x60 cm + duwbeugel
Plaatstalen kipbak
Plaatstalen kipbak, afm. 126x130xD 100 cm, v.v.: inrijgleuven voor heftruck, grijs gelakt, ongebruikt
Plaatstalen kipbak
Plaatstalen kipbak, afm. 126x130xD 100 cm, v.v.: inrijgleuven voor heftruck, rood gelakt, ongebruikt
Plaatstalen kipbak
Plaatstalen kipbak, afm. 126x130xD 100 cm, v.v.: inrijgleuven voor heftruck, rood gelakt, ongebruikt
Plaatstalen kipbak
Plaatstalen kipbak, afm. 126x130xD 100 cm, v.v.: inrijgleuven voor heftruck, blauw gelakt,
ongebruikt
Plaatstalen kipbak
Plaatstalen kipbak, afm. 126x130xD 100 cm, v.v.: inrijgleuven voor heftruck, blauw gelakt,
ongebruikt
Plaatstalen kipbak
Plaatstalen kipbak, afm. 126x130xD 100 cm, v.v.: inrijgleuven voor heftruck, geel gelakt, ongebruikt
Plaatstalen kipbak
Plaatstalen kipbak, afm. 126x130xD 100 cm, v.v.: inrijgleuven voor heftruck, geel gelakt, ongebruikt
Plaatstalen afvalbak
Plaatstalen afvalbak, onderuitlaatluik, v.v.: inrijbeugels voor heftruck, afm. 190x90xD 125 cm, geel
gelakt, ongebruikt
Dubbele plaatstalen kipbak
Dubbele plaatstalen kipbak, op chasis, v.v.: inrijgleuven voor heftruck, afm. per bak 70x130xD 94
cm
Plaatstalen kipbak
Plaatstalen kipbak, op mobiel chasis, v.v.:inrijgleuven voor heftruck, afm. 60x100xD 58 cm
Plaatstalen spanenopvang kipbak
Plaatstalen spanenopvang kipbak, v.v.: inrijgleuven voor heftruck, afm. 50x90xD 35 cm
Plaatstalen kipbak
Plaatstalen kipbak, v.v.: inrijgleuven voor heftruck, afm. 60x100xD 58 cm
Plaatstalen kipbak
Plaatstalen kipbak, op mobiel onderstel, v.v.: inrijgleuven voor heftruck, afm. 310x110xD 100 cm
Plaatstalen kipbak
Plaatstalen kipbak, gegalvaniseerd, op mobiel onderstel, v.v.: inrijgleuven voor heftruck, afm.
200x130xD 100 cm
Plaatstalen kipbak
Plaatstalen kipbak, op mobiel onderstel, v.v.: inrijgleuven voor heftruck, afm. 125x130xD 100 cm,
groen gelakt
Plaatstalen kipbak
Plaatstalen kipbak, op mobiel onderstel, v.v.: inrijgleuven voor heftruck, afm. 125x140xD 80 cm,
blauw gelakt
Plaatstalen kipbak
Plaatstalen kipbak, op mobiel onderstel, v.v.: inrijgleuven voor heftruck, afm. 125x130xD 100 cm,
blauw gelakt
Plaatstalen kipbak
Plaatstalen kipbak, op mobiel onderstel, v.v.: inrijgleuven voor heftruck, afm. 125x130xD 80 cm,
blauw gelakt + extra hijsogen
Plaatstalen kipbak
Plaatstalen kipbak, v.v.: inrijgleuven voor heftruck, afm. 125x130xD 100 cm + hijsogen
Plaatstalen kipbak
Plaatstalen kipbak, v.v.: inrijgleuven voor heftruck, afm. 150x130xD 100 cm + hijsogen
Lot
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
Number Description
1 Plaatstalen kipbak
Plaatstalen kipbak, v.v.: inrijgleuven voor heftruck, afm. 150x130xD 100 cm + hijsogen
1 Plaatstalen kipbak
Plaatstalen kipbak, v.v.: inrijgleuven voor heftruck, afm. 150x130xD 100 cm + hijsogen
1 Plaatstalen kipbak
Plaatstalen kipbak, v.v.: inrijgleuven voor heftruck, afm. 150x130xD 100 cm + hijsogen
1 Plaatstalen kipbak
Plaatstalen kipbak, v.v.: inrijgleuven voor heftruck, afm. 150x130xD 100 cm + hijsogen
1 Plaatstalen kipbak
Plaatstalen kipbak, v.v.: inrijgleuven voor heftruck, afm. 150x130xD 100 cm + hijsogen
1 Plaatstalen kipbak
Plaatstalen kipbak, v.v.: inrijgleuven voor heftruck, afm. 150x130xD 100 cm + hijsogen
1 Profielstalen werkbank
Profielstalen werkbank, afm. 210x104xH 81 cm + plaatstalen bovenblad, bankschroef
1 Houten kast
Houten kast, 2-deurs, afm. 185x50xH 210 cm + houten legborden
1 Profielstalen werktafel
Profielstalen werktafel, afm. 300x150xH 112 cm, diam. gaten 40 mm + stalen geperforeerd
bovenblad
1 Mobiele profielstalen werktafel
Mobiele profielstalen werktafel, afm. 200x100xH 104 cm + bovenblad in betonplex
1 Profielstalen werktafel
Profielstalen werktafel, afm. 250x150xH 107 cm + plaatstaal bovenblad
1 Profielstalen werkkooi
Profielstalen werkkooi, afm. 4000x1000xH 1230 mm, v.v.: inrijgleuven voor heftruck
1 Profielstalen werkbank
Profielstalen werkbank, afm. 315x80xH 82 cm, v.v.: houten bovenblad, muur opstand, 4 laden, 2x 2deurs opbergruimtes
1 Profielstalen zware lastkar
Profielstalen zware lastkar, afm. 3000x1200 mm + stuurwielen
1 Profielstalen aanbrengkar
Profielstalen aanbrengkar, afm. plateau 75x70 cm + duwbeugel
1 Profielstalen werkkooi
Profielstalen werkkooi, afm. 248x100xH 125 cm, v.v.: inrijgleuven voor heftruck
1 Profielstalen kogeltafel
Profielstalen kogeltafel, afm. 300x100xH 100 cm
1 Profielstalen bijzetwerktafel
Profielstalen bijzetwerktafel, afm. 400x80xH 80 cm + plaatstaal bovenblad
1 Profielstalen platenkar
Profielstalen platenkar, zware last, afm. 400x100xH 68 cm, v.v.: wand insteek profiels + dissel
1 Profielstalen platenoplegkar
Profielstalen platenoplegkar, afm. 6000x1000xH 900 mm, v.v.: 2 zwenkwielen + 2 staalplaten afm.
3000x1540xD 3 mm
2 Profielstalen karren
Profielstalen karren, zware last, afm. 200x150xH 86 cm
1 Profielstalen atelierkar
Profielstalen atelierkar, stapelbaar, afm. 160x110xH 156 cm, houten zijwanden
2 Profielstalen rollenbanen
Profielstalen rollenbanen, in hoogte verstelbaar, L: 300 cm, br.: 38 cm, rolbr.: 29 cm
1 Profielstalen bak
Profielstalen bak, houten vloer en zijwanden, afm. 158x100xH 100 cm
2 Draadstalen hekken
Heras, Draadstalen hekken, afm. 345xH 200 cm
2 Profielstalen inlegrekken
Profielstalen inlegrekken, stapelbaar, afm. 1x 106x100xH 108 cm + 1x 100x90xH 100 cm
1 Profielstalen platenbak
Lot
Number Description
612
1
613
1
614
1
615
1
616
1
617
1
618
2
619
1
620
1
621
3
622
1
623
1
624
1
625
1
626
1
627
1
628
1
629
1
630
3
631
2
632
40
633
1
634
1
635
1
Profielstalen platenbak, afm. 170x235xH 170 cm, v.v.: inrijgleuven voor heftruck
Profielstalen platenbak
Profielstalen platenbak, afm. 170x235xH 170 cm, v.v.: inrijgleuven voor heftruck
Profielstalen kar
Profielstalen kar, zware last, afm. 200x120xH 48 cm, v.v.: stuurwielen
Profielstalen werktafel
Profielstalen werktafel, afm. 255x130xH 96 cm, v.v.: bankschroef, onderlegbord, plaatstaal
bovenblad
Profielstalen werktafel
Profielstalen werktafel, afm. 210x104xH 82 cm, v.v.: bankschroef, plaatstaal bovenblad
Profielstalen werktafel
Profielstalen werktafel, afm. 190x104xH 82 cm, v.v.: bankschroef, plaatstaal bovenblad
Profielstalen werktafel
Profielstalen werktafel, afm. 200x102xH 90 cm, v.v.: onderlegbord, staalplaat bovenblad
Diverse atelierkarren
Diverse atelierkarren, profielstaal, 1x 158x104xH 78 cm, 1x 235x100xH 90 cm
Rvs armstelling
Rvs armstelling, dubbelzijdig, 6-inlegniveaus, totale afm. 460x130xH 210 cm
Dust extraction silo
Nederman, GE1000, serial number 0609007, Dust collection silo, work pressure max. 0,11 bar, 20°
C, size 145x120xH 425 cm + various accessories
Diverse metalen afvalbakken
Diverse metalen afvalbakken, 1x primus stapelbaar 120x80xH 52 cm, 1x 150x100xH 92 cm, 1x
140x115xH 82 cm
Rol doorgangs pvc flappen
T Bleute T Clear Blue, Rol doorgangs pvc flappen, afm. 300 mm x 3 mm x 50 m + restanten op
pallet, 2 kartonnen dozen en bak
Partij diverse rooster traptreden
Partij diverse rooster traptreden, gegalvaniseerd rooster, maten: 66x 80x23 cm + 19x 100x27 cm +
28x 80x27 cm + 16x 100x22 cm + 14x 86x24 cm + 18x 100x23 cm geperforeerd, op 7 palletten
Partij zware spanttrekijzers
Partij zware spanttrekijzers, met schroefdraad + 9 metaalketels, in karton doos + jute zakken
Ironprofile pallet rack
Ironprofile pallet rack, exists of: 10 ladders 80x450 cm, 90 joists L: 150 cm - profile 8x5 cm +
wooden tablets with substance
Profielstalen inhaakpalletstelling
Stow, Profielstalen inhaakpalletstelling, bestaande uit: 4 staanders, br. 100 cm x H 300 cm + 35
liggers L: 360 cm, profiel 12x5
Inhoud stelling lot 626
Inhoud stelling lot 626, bestaande uit: brandblussers, electrokabel, metaalrestanten, frigo, houten
bak met veiligheidshelmen, houten bobijnen, rest inhoud onder bordes
Screw compressor
Atlas Copco, GA 710, Screw compressor, 19 795h on counter
Partij bouwschoren en steunen
Adria, Partij bouwschoren en steunen, in profielstalen bak + 2 metalen draaischoren
Stapelbare containers
Anisa, VARI 800 PE, Stapelbare containers, in kunststof, max. cap. 800 l, gewicht 190 kg
Metalen bakken
Metalen bakken, stapelbaar, afm. 140x115xH 83 cm
Stelling leuningselementen
Stelling leuningselementen, metaal, op 2 palletten
Plaatschroefmachine
Hilti, ST 1800, Plaatschroefmachine, 220 V, 600 X, 0-1900 Hmin
Haakse slijper
Hilti, AG 230-S, Haakse slijper
Haakse slijper
Lot
Number Description
636
1
637
3
638
1
639
2
640
1
641
1
642
1
643
1
644
1
645
1
646
2
647
3
648
2
649
2
650
1
651
1
652
1
653
1
654
3
655
1
656
1
657
1
658
1
659
1
660
1
Hilti, AG 230-S, Haakse slijper
Haakse slijper
Hilti, AG 230-S, Haakse slijper
Haakse slijpers
Hilti, AG 125 SE, Haakse slijpers, 230 V, 1020 W, 2800-11000 t/min, blad diam. 125 mm
Elektrische boorhamer
Hilti, TE 55, Elektrische boorhamer, 230 V, 900 W, 230-480 t/min, in koffer
Elektrische moeraanzetters
Hilti, ST 18, Elektrische moeraanzetters, 230 V, 600 W, 0-1900 t/min
Accu boorschroefmachine
Hilti, SF 150-A, Accu boorschroefmachine, in koffer + batterijen, batterijoplader
Componenten spuit
Hilti, MD 2000, Componenten spuit, in koffer
Componenten spuit
Hilti, MD 2500, Componenten spuit, in koffer
Assortiment keil/verankeringsbouten
Assortiment keil/verankeringsbouten, in koffer
Haakse slijper
Hitachi, G28SC2, Haakse slijper, 230 V, 2200 W, 6600 t/min, blad diam. 230 mm, in koffer
Haakse slijper
Hitachi, G23SC2, Haakse slijper, 230 V, 2200 W, 6600 t/min, blad diam. 230 mm, in koffer
Haakse slijpers
Hitachi, G23SC2, Haakse slijpers, 230 V, 2200 W, 6600 Hmin, blad diam. 230 mm
Haakse slijpers
Hitachi, Haakse slijpers, w.v.: 1x type G23SC2, 2200 W + 1x type G23SC3, 2300 W, 230 V, 6600
t/min, blad diam. 230 mm + 1x type G13SE, 230 V, 1020 W, 10 000 t/min, blad diam. 125 mm
Elektrische boormachines
Hitachi, Elektrische boormachines, handbediend, 1x type D13VF, 1x type CRVF
Accu boorschroefmachines
Hitachi, DS14 DVF, Accu boorschroefmachines, 14,4 V, 0-1200 t/min, v.v.: Hitachi lader + 2 accu
looplampen
Accu boorschroefmachine
Hitachi, DS14 DVF2, Accu boorschroefmachine, 14,4 V, 0-1200 t/min, v.v.: lader, in koffer
Elektrische boorhamer
Spit, 342, Elektrische boorhamer, 220 V, 50 Hz, 600 W, 420 t/min
Elektrische boorhamer
Spit, 385, Elektrische boorhamer, 220 V, 50/60 Hz, 1050 W
Schietmachine
Spit, 200, Schietmachine, caliber 6,3/10 - 6,3/12
Diverse haakse slijpers
Diverse haakse slijpers, blad diam. 125 mm, w.o.: Bosch, Flex
Haakse slijper
Bosch, Haakse slijper, 135 V - 3-fasig, 200 V, 10 A, 1950 W, 6600 t/min, blad diam. 230 mm
Elektrisch bediende stiftpoliermachine
Bosch, D602, Elektrisch bediende stiftpoliermachine, 3-fasig, 220 V, 1450 W, 6800 t/min +
stiftpoliermachine, te repareren, z.v.g.
Zware moeraanzetter
Zware moeraanzetter, elektrisch, 220 V, 570 W, 360 t/min, max. 23 mm
Elektrische handboormachine
Protool, DRP16E2, Elektrische handboormachine, 230/240 V, 900 W, 0-1680 t/min, max. diam. 16
mm, 2 snelheden, in koffer
Afkortcirkel zaagmachine
Skilsaw, 1965HS, Afkortcirkel zaagmachine, 220 V, 1500 W, blad diam. 1500 mm, 65 mm
Tafel verstek afkortcirkelzaag
Tup Craft, TTS720, Tafel verstek afkortcirkelzaag, 230 V, 720 W, max. D 43 mm, zaagblad 205 x
2,4 x diam. 16 mm
Lot
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
Number Description
1 Diverse boormachines
Diverse boormachines, elektrisch handbediend, z.v.g.
1 Accu moeraanzetter
Makita, 6900D, Accu moeraanzetter, 9,6 V, 1500 t/min, in koffer (excl. lader) + Power Plus
oplaadbare handschroefmachine (excl. lader)
3 Diverse machines
Makita, Diverse machines, elektrisch handbediend, w.o.: 1 Makita boormachine HP2071F, 230 V,
1010 W + 1 Makita haakse slijper, blad diam. 125 mm + 1 Makita bandschuurmachine 9030, 220 V,
490 W
1 Accu moeraanzetter
Makita, 69 18 FD, Accu moeraanzetter, 12 V, 0-3000 t/min + lader, in koffer
3 Accu moeraanzetters
Makita, BTW 200 M10-M16, Accu moeraanzetters, 24 V, 0-3000 t/min + batterijladers (excl. 1
batterij)
1 Moeraanzetter
Makita, 6802BV, Moeraanzetter, elektrisch handbediend, 230 V, 510 W, 0-2500 t/min, in metalen
koffer
1 Contact klop/boorhamer
Metabo, KHE 26, Contact klop/boorhamer, 230 V, 800 W, 0-1050 t/min, staal diam. 13 mm, in
koffer
1 Accu boorschroefmachine
Metabo, Beat 112/2 R+L, Accu boorschroefmachine, 12 V, 0-1100 t/min + batterijen, lader, in koffer
3 Haakse slijpers
Metabo, WO 125 SP, Haakse slijpers, elektrisch handbediend, 220 W
2 Haakse slijpers
Metabo, W23-230, Haakse slijpers, elektrisch handbediend, 230 V, 2300 W, 6600 t/min, diam. blad
230 mm
1 Elektrische boorhamer
Metabo, KHE 75, Elektrische boorhamer, 230 V, 1150 W, 140-280 t/min, D 45 mm
1 Elektrische boorhamer
Bosch, UBH 6, Elektrische boorhamer, 220 V, 800 W, in koffer
1 Boorschroefmachine
Bosch, GSR 6-6KE, Boorschroefmachine, elektrisch, handbediend, 220 V, 350 W, 0-1100 t/min, in
koffer
1 Elektrische boorhamer
Bosch, GBH 3-28E, Elektrische boorhamer, 230 V, 720 W, in koffer
1 Klop/boormachine
Bosch, GBH25R, Klop/boormachine, 220 V, 680 W, max. diam. 13 mm, in koffer
1 Professional accu moeraanzetter
Bosch, GDS 18V, Professional accu moeraanzetter, 0-2000 t/min, v.v.: Bosch acculader + Bosch
type GSR 14,4 VE2 boorschroefmachine 14,4 V, 0-4500 t/min, in koffer (excl. lader)
1 Klop/boormachine
Bosch, GSB 20-2 RE, Klop/boormachine, 230 V, 800 W, 0-3000 t/min, in koffer
1 Klop/boormachine
Bosch, GSB 20-2 RE, Klop/boormachine, 230 V, 800 W, 0-3000 t/min, in koffer
1 Klop/boormachine
Bosch, GSB 20-2 RE, Klop/boormachine, 230 V, 800 W, 0-3000 t/min, in koffer
1 Klop/boormachine
Bosch, GSB 20-2 RE, Klop/boormachine, 230 V, 800 W, 0-3000 t/min (excl. koffer)
1 Boormachine
Bosch, GBM 23-2, Boormachine, elektrisch, handbediend, 2 snelheden, 230 V, 1150 W, 400 t/min
diam. 23 mm, 900 t/m diam. 13mm
1 Boorhamer
Bosch, GBH 7/45 DE, Boorhamer, elektrisch bediend, 220 V, 880 W, 120-245 t/min, diam. 12-45
mm, in koffer
2 Haakse slijpers
Lot
Number Description
684
3
685
2
686
2
687
1
688
1
689
1
690
1
691
1
700
1
701
1
702
1
703
1
704
1
705
1
706
1
Bosch, GWS 15-125, Haakse slijpers, Cith professional, 220 V, 1500 W, 2800-9300 t/min, blad
diam. 125 mm
Diverse haakse slijpers
Diverse haakse slijpers, blad diam. 125 mm, w.v.: 2x Bosch (excl. 1 stekker) + 1x Makita
Haakse slijpers
Bosch, Haakse slijpers, w.v.: 1x type GWS 26-230 BV, 220 V, 2600 W, blad diam. 230 mm + 1x
type GWS 20-23 C, 280 V, 2000 W (excl. stekker)
Haakse slijpers
Bosch, GWS 26-230 BV, Haakse slijpers, 220 V, 2600 W, blad diam. 230 mm (excl. 1 stekker)
Haakse slijper
Bosch, GWS 26-230 B, Haakse slijper, 220 V, 2600 W, blad diam. 230 mm, in koffer
Haakse slijper
Bosch, GWS 26-230 B, Haakse slijper, 220 V, 2600 W, blad diam. 230 mm, in koffer
Waterdispenser
Culligan, FB 14 E, serial number 63506630, Waterdispenser, 220 V
Flessenwagen
Flessenwagen, v.v.: leidingen, manometers, Metalspray, spuitpistool nr 2009, prop max. 3 bar, OX
Air max. 6 bar, incl. ton met metalisé draad
Plateauwagen
Plateauwagen, v.v.: persluchtbord, leidingen, manometer
Magazijnrek
Fabory, Magazijnrek, 3-delig, plaatstaal, afm. 300x30xH 198 cm, 3x12 legborden met inhoud, w.o.:
montagelijm, snijschijven, silicone spuiten enz...
Plaatstalen magazijnrek
Plaatstalen magazijnrek, v.v.: 108 grijpvakken met inhoud, bestaande uit: bouten, moeren, rondellen,
enz...
Plaatstalen magazijnrek
Fabory, Plaatstalen magazijnrek, v.v.: 12 vakken, legborden met inhoud, w.o.: moeren, bouten M3M8
Plaatstalen magazijnrek
Fabory, Plaatstalen magazijnrek, 5-delig, 5x 12 vakken legborden met inhoud, w.o.: tapbouten
M4x10, M14x80, M10x90, M5x16 - afm. per element: 100x30xH 198 cm
Plaatstalen magazijnrek
Fabory, Plaatstalen magazijnrek, v.v.: 12 vakken legborden met inhoud, w.o.: bouten conische kop
M4L30-M5L10
Plaatstalen magazijnstelling
Fabory, Plaatstalen magazijnstelling, 6-delig, 6x 12 vakken legborden, met inhoud, w.o.:
stelschroeven, inwendige zeskant zonder kop M10L20, verzinkte schroeven, rivettennagels,
verzinkte opspanrondellen Nord-Lock, enz...
Iron storage rack
Fabory, Iron storage rack, 7 parts, 7x 12 compartments tablets, with substance: iron wrenches,
pneumatic components, oils, penetrating oil, drilloil, copper spray, burner accessories, manometer,
gas burner basins, … size per element 100x30xH 198 cm
Combination 700 - 706
707
708
709
710
1 Plaatstalen magazijnstelling
Plaatstalen magazijnstelling, 272 grijpbakken, met inhoud, bestaan uit: elektrische onderdelen,
slijkschijfwisselstukken, zekeringen, aansluitneuzen, hamers, vijlen, enz.. tot. afm. rekken 550x45xH
140 cm
1 Plaatstalen magazijnrek
Fabory, Plaatstalen magazijnrek, afm. 100x30x198 cm, v.v.: 12 vakken legborden, met inhoud,
bestaande uit: lampen, stekkers, bevestigingsmateriaal, enz...
1 Houten kast
Houten kast, 64 vakken, met inhoud bestaande uit: harpsluitingen, O-ringen, machine optilogen,
spanbeugels, kettingen
1 Plaatstalen magazijnstelling
Plaatstalen magazijnstelling, afm. 500x50xH 178 cm, 112 grijpbakken, met inhoud bestaande uit:
Lot
Number Description
711
1
712
1
713
1
714
1
715
1
716
1
717
1
718
2
719
1
720
1
721
1
722
1
723
1
724
1
725
1
726
1
727
1
728
1
729
1
diverse bouten M12x16 - M30x80 - M27x70
Inhoud Kantmagazijnstelling
Inhoud Kantmagazijnstelling, kleur: blauw, bestaande uit: verzinkte zeskantbouten en moeren, 12x60
M12x30 19x90 - 20x60 M16x30 M24x100 - 20x50 M22x70 M20x80, enz...
Inhoud Kantmagazijnstelling
Inhoud Kantmagazijnstelling, kleur: beige, bestaande uit: keilbouten Hilti M16/25, verzinkte bouten,
moeren, rondellen, machinehijsogen, enz...
Brandwerende kast
Brandwerende kast, metaal, 2-deurs, afm. 120x60xH 197 cm, brandweerbaarheid: 30 min.
Profielstalen magazijnstelling
Profielstalen magazijnstelling, gelast, 6 niveaus, houten legborden, afm. 300x50xH 200 cm, incl.
inhoud bestaande uit: ca 30 lege koffers Hilti, Bosch, Makita
Profielstalen magazijnstelling
Profielstalen magazijnstelling, gelast, 6 niveaus, houten legborden, afm. 300x50xH 200 cm, incl.
inhoud bestaande uit: Hilti plaatschroeven + Hilti Hus-H 16,115 - 16,5x135 + Hilti montageklemmen,
schietnagels, 21 HVB, enz...
Inhoud Deel magazijnstelling
Inhoud Deel magazijnstelling, kleur: beige, bestaande uit: floor cleaner, vloeibare zeep,
bevestigingsmateriaal, enz...
Inhoud Deel magazijnstelling
Inhoud Deel magazijnstelling, kleur: blauw, bestaande uit: zwenkwielen, bevestigingsmateriaal,
waterleidingen, Festo cilinders, Hiflex 348 3/8 pneumatische leiding, enz...
Profielstalen magazijnstellingen
Profielstalen magazijnstellingen, gelast, dubbelzijdig, 4 etages, afm. per element 295x100xH 180
cm, kleur: blauw, houten legborden, afhalen op afspraak
Profielstalen magazijnstelling
Profielstalen magazijnstelling, gelast, dubbelzijdig, 4 etages, houten legborden, kleur: beige, afm.
294x100xH 180 cm, afhalen op afspraak
Profielstalen magazijnstelling
Profielstalen magazijnstelling, gelast, 3 secties, 4 niveaus, afm. 500x76xH 225 cm, incl. inhoud
bestaande uit: aardingskabel, electrokabel, chauffage elementen, machinekettingen, motoren,
Philips verlichtingslampen, V-riemen, enz...
Profielstalen magazijnstelling
Profielstalen magazijnstelling, gelast, 3 secties, 4 niveaus, afm. 500x76xH 225 cm, incl. inhoud
bestaande uit: aardingskabel, electrokabel, chauffage elementen, machinekettingen, motoren,
Philips verlichtingslampen, V-riemen, enz...
Muurafrolhaspel
Blue-Point, YAZ 10, Muurafrolhaspel, diam. 10 mm, 12 bar, v.v.: automatische sto met luchtslang, L:
9m
Muurafrolhaspel
Zeca, Muurafrolhaspel, electrokabel, automatische stop, L: 11,5 m, 230 V, max. 1800 W
Mazout brander
Ecoflam, MINOR 30.1 TL, Mazout brander, min. 178 kW, max. 332 kW, min. 15 kg/h, max. 28 kg/h,
230 V
Profielstalen werkbank
Profielstalen werkbank, afm. 150x70xH 89 cm, houten bovenblad, bankschroef, 4 laden, kast, incl.
inhoud: divers handgereedschap
Mobiele waterslangafrolhaspel
Mobiele waterslangafrolhaspel
Profielstalen magazijnstelling
Profielstalen magazijnstelling, afm. 500x110xH 225 cm, gelast, 4 niveaus, 3 secties, incl. inhoud,
w.o.: schuurbanden, lastoevoegsel, laskappen, lege machinekoffers, enz...
Profielstalen inlegstelling
Profielstalen inlegstelling, dubbelzijdig, afm. 100x50xH 155 cm, incl. inhoud bestaande uit: diverse
draadstangen M3-M30
Profielstalen werktafel
Profielstalen werktafel, 2-delig houten bovenblad, afm. 312x102xH 90 cm
Lot
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
Number Description
1 Profielstalen magazijnstelling
Profielstalen magazijnstelling, gelast, 3 niveaus, 3 secties, afm. 300x53xH 150 cm, v.v.: houten
legborden, incl. inhoud bestaande uit: 20 metalen grijpbakken, 8 emmers met afgekorte
draadstangen + luchtleidingen
1 Profielstalen magazijnstelling
Profielstalen magazijnstelling, gelast, 2 secties, 4 niveaus, afm. 400x58xH 204 cm, incl. inhoud
bestaande uit: diverse olieën, dichtingsmateriaal, Teflon, afvoerbochten, luchtslang, enz...
1 Profielstalen magazijnstelling
Profielstalen magazijnstelling, gebout, 5 niveaus, 3 secties, houten legborden, afm. 305x54xH 200
cm, incl. inhoud bestaande uit: lasflenzen, dichtingen
1 Profielstalen rek
Profielstalen rek, 1x 7 niveaus, 1x 4 niveaus, bankschroef, incl. inhoud; w.o.: staalkabel
1 Profielstalen inhaakmagazijnstelling
Profielstalen inhaakmagazijnstelling, 3 secties, 4 niveaus, afm. 442x60xH 200 cm, incl. inhoud; w.o.:
veiligheidskegels, houten klimkladder, houten opbergkoffer
1 Profielstalen magazijnrek
Profielstalen magazijnrek, 6 etages, metalen legborden, afm. 148x48xH 220 cm
1 Gegalvaniseerde magazijnstelling
Gegalvaniseerde magazijnstelling, 8 staanders, 38xH 200 cm, 20 in haak gegalvaniseerde
legborden, 36x98 cm + 9 in haak gegalvaniseerde legborden, 36x124 cm
1 Houten kast
Houten kast, 2-deurs, legborden, afm. 184x53xH 210 cm, incl. inhoud bestaande uit: 1 Aryvest
duikvest met gewichten + 2 metalen kisten met drukmateriaal + koord op bobijn
1 Houten kast
Houten kast, 6-deurs, legborden, incl. inhoud bestaande uit: werkkledij, regenvesten, lasvesten, incl.
oude computerschermen (Océ Plotter te repareren)
1 Pijphouder
Kevlar, 300/600, Pijphouder, op luchtdruk, diam. pijp 300-600 mm, max. werkdruk 3 bar
1 Partij diverse electro-verlengkabels
Partij diverse electro-verlengkabels, 220 V, 380 V + 2 houten bobijnen, electrokabel, 400 V +
werfkast
1 Profielstalen stelling
Profielstalen stelling, 3 niveaus, houten legborden, afm. 172x56xH 167 cm, incl. inhoud: werkkoffer,
pvc emmers, folie
1 Profielstalen magazijnstelling
Profielstalen magazijnstelling, 2 secties, afm. 370x50xH 200 cm + inbouw 2-deurskast, 5 niveaus,
incl. inhoud: diverse kogellagers, schuurborstels, afrolhaspels, enz...
1 Metalen kast
Bott, Metalen kast, 2-deurs, legborden, incl. inhoud, afm. 100x50xH 200 cm
1 Houten magazijnstelling
Houten magazijnstelling, 4 secties, 3 niveaus, incl. inhoud: divers te repareren elektrisch
handgereedschap, w.o.: puntlassen, magneetboren, dompelpomp, haakse slijpers, electrokabel op
rol
1 Plaatstalen grijpbakkenrek
Plaatstalen grijpbakkenrek, 5 niveaus, afm. 300x40xH 137 cm, incl. inhoud: diverse
pijpfittingsbochten, moffen met draad
1 Buisstalen werktafel
Buisstalen werktafel, houten bovenblad, afm. 150x80xH 99 cm + alu rekje met schuinliggende
inschuifposities
2 Metalen bureau's
Metalen bureau's, 1x 3 LL, 1x 3 LR + 1 mobiele 4-laden blok, 1 metalen + 2 deurskast, legborden,
mobiele bureaustoel, bijzetstoel + Olivetti kopieermachine, 1 mobiele afvalrolcontainer 120 L
1 Serverkast
Le Grand, Serverkast, v.v.: 3 Panduit poortpanels + 1 Tricom switch panel + 1 Cisco switch panel +
1 Viking concentrator + 2 telefoontoestellen
1 Metalen kast
Metalen kast, 2-deurs, 8 vakken, incl. inhoud: diverse laselectroden + 1 Bosch koelkast, ca 15
Lot
Number Description
750
1
751
1
752
1
753
1
754
1
755
1
756
1
757
1
758
1
759
1
760
1
761
1
762
1
800
2
801
2
802
3
803
2
804
2
805
1
806
1
807
1
808
2
809
1
810
1
811
7
pakken deels aangebroken laselectroden + 1 Esab type PK1 laselectrodendroger, 220 V
Alu muurrek
Alu muurrek, v.V.: vakkenbak, incl. inhoud: metaalboren, klokzagen
Drankenautomaat
Sielaff, FK 170, Drankenautomaat, 6 keuzes, Euro inworp, 220 V, 425 W, sleutel ok
Inhoud Refterlokaal
Inhoud Refterlokaal, w.o.: 5 diverse eettafels, 24 stoelen, Panasonic microgolf, Brother waterkoker,
boomkapstok, grill, enz... (excl. drank, snoep, automaat, spoeltafel met onderbouwkasten)
Plotter
HP, Design Jet T 790, year built 2011, serial number CN19G4HQ5C, Plotter, 240 V, 120 W, A0-A4
Planafdrukmachine
HP, Design Jet 430, Planafdrukmachine, te herstellen + fax Brother type 8070 P laser, incl. tafel
PC configuratie
PC configuratie, bestaande uit: PC Dell, type Precision 490, flatscreen + Dell klavier + Dell muis
PC configuratie
PC configuratie, bestaande uit: PC Fujitsu-Siemens, type Celsius, flatscreen, klavier, muis
Faxtoestel
Brother, 80708, Faxtoestel, laser
Koffiezet
Nespresso, Koffiezet + 1x Sierra koelkast, tafelmodel + 1x Elta bijzetverwarming + 1x kamerplant
Partij divers kantoormeubilair
Partij divers kantoormeubilair, w.o.: 2x witte, houten bureautafels, 240x110 cm, 180x75 cm + 3x
diverse mobiele blokken, 3 laden + 1x Schaeffer metalen kast, 4 laden + 1x metalen dossierkast, 2deurs + 6x diverse stoelen + 1x white board
Metalen plannenkast
Metalen plannenkast, 2-delig, 2x 5 laden, afm. 150x104xH 150 cm
Divers kantoormeubilair
Divers kantoormeubilair, w.o.: 1x houten bureautafel, 180x75 cm, 2x diverse ladenblokken + 3x
diverse hoge metalen dossierkasten + 2x diverse lage metalen dossierkasten + 2x mobiele
bureaustoelen + 1 white board
Diverse dossierbakjes
Diverse dossierbakjes + 1 miniketen, met CD
Diverse trapladders
Diverse trapladders, 4+1 treden, 6+1 treden
Diverse alu trapladders
Diverse alu trapladders, 3+1 treden, 5+1 treden
Alu trapladders
Alu trapladders, 5+1 treden
Alu trapladders
Alu trapladders, 6+1 treden
Alu trapladders
Alu trapladders, 6+1 treden
Alu opsteekladder
Alu opsteekladder, 2x 12 sporten
Alu opsteekladder
Alu opsteekladder, 2x 14 sporten
Alu opsteekladder
Alu opsteekladder, 2x 18 sporten
Alu ladders
Alu ladders, 1x 16 sporten + 1x 16 sporten (breed model)
Alu opsteekladder
Alu opsteekladder, 3x 10 sporten
Alu opsteekladder
Alu opsteekladder, 1x 11 sporten + 1x 12 sporten
Losse alu ladders
Losse alu ladders
Lot
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
Number Description
1 Bandzaagmachine
Bandzaagmachine, gedemonteerd, 380 V
1 Buisprofiel plooipers
Buisprofiel plooipers, electro-hydraulisch, 380 V + 9 diverse plooibekken
1 Metalen werkbank
Metalen werkbank, wandbord + metalen kast, 2-deurs, incl. diverse inhoud + metalen kast, 40
vakken, incl. inhoud: diverse korte metalen stukken
1 Buizenplooimachine
CML, TB 60, year built 2005, serial number 6005062, Buizenplooimachine, 400 V + mobiele kar,
incl. diverse plooibekken
1 Profielstalen werkbank
Profielstalen werkbank, afm. 200x90xH 76 cm, incl. bankschroef, v.v.: opgelast 2-etagerek
1 Columm drilling machine
Alz Metal, AB36/SV, year built 1998, Columm drilling machine, 440 V, provided with: workpiece
clamping gripe
1 Columm drilling machine
Metalik, PK040A, serial number 1109, Columm drilling machine, 95 -> 1320 RPM
1 Profielstalen tafel
Profielstalen tafel, schuine opstand, incl. inhoud: diverse boren
1 Electrokabelwandhaspel
Blue-Point, 3G 1.5, Electrokabelwandhaspel, 10 Lm
1 Stroomkast
Stroomkast, 4x 230 V exit, 2x 380 V exit
1 Profielstalen werktafel
Profielstalen werktafel, bankschroef, afm. 190x100xH 82 cm
1 Elektrische buizenponsmachine
Elektrische buizenponsmachine, 380 V, profielstalen werktafel - afm. 185x80xH 76 cm
1 Profielstalen werktafel
Profielstalen werktafel, bankschroef, afm. 192x104xH 82 cm
1 Slijpmachine
Slijpmachine, 2-steens, kolomvoet, 380 V
14 Lasatelierschermen
Lasatelierschermen, div. afm.
2 Diverse metalen kisten
Diverse metalen kisten, hefter + 1 Facom wandkast, voor gereedschappen + 1 wandbord, met
markeerlabels
1 Profielstalen werktafel
Profielstalen werktafel, bankschroef, afm. 198x90xH 90 cm + 3 diverse kastjes, metaal + inhoud
tafel: divers gereedschap
1 Electrokabelwandhaspel
Zeca, 3G 1,5, Electrokabelwandhaspel, 10 m
1 Profielstalen werktafel
Profielstalen werktafel, bankschroef, afm. 201x100xH 90 cm
1 Electrokabelwandhaspel
Zeca, 3G 1,5, Electrokabelwandhaspel, 10 m
1 Profielstalen werktafel
Profielstalen werktafel, bankschroef, afm. 210x104xH 82 cm
1 Persluchtbehandelingsunit
Fro, Persluchtbehandelingsunit, 230 V, demontage tot 1e kogelkraan
19 Diverse profielstalen schragen
Diverse profielstalen schragen
10 Diverse zware profielstalen schragen
Diverse zware profielstalen schragen
30 Diverse profielstalen schragen
Diverse profielstalen schragen
8 Diverse profielstalen schragen
Lot
Number Description
838
8
839
1
840
30
841
1
842
1
843
1
844
1
845
1
846
1
847
1
848
1
849
1
850
1
851
2
852
1
853
1
854
3
855
2
856
1
857
1
858
1
859
4
860
1
861
1
862
1
Diverse profielstalen schragen
Diverse rolgeleiders
Diverse rolgeleiders, in hoogte verstelbaar
Diverse halffabrikaten voor optrekcontainerconstructie
Diverse halffabrikaten voor optrekcontainerconstructie, w.o.: 6 rollen + 5 optrekhaken + 2
frontkaders, afm. 201,5xH 121 cm + 4 achterkaders, 2 wielen, afm 214,5 x 114cm + 1 achterkader
250xH 200 cm
Profielstalen steunkaders
Profielstalen steunkaders, afm. 60xH 50 cm
Profielstalen werktafel
Profielstalen werktafel, 3 schragen, 130x85 cm + los metalen werkblad, 600x150 cm + afhalen na
afspraak (excl. inhoud)
Zware profielstalen werktafel
Zware profielstalen werktafel, 5 schragen, vast, afm. 150xH 85 cm + zwaar metalen blad,
600x150xD 2 cm + afhalen na afspraak (excl. inhoud)
Rvs werktafel
Rvs werktafel, in hoogte verstelbaar, bankschroef, afm. 210x102xH 97 cm, afhalen na afspraak
(excl. inhoud)
Zwaar metalen werktafel
Zwaar metalen werktafel, bankschroef, afm. 300x94xH 92 cm + afhalen na afspraak (excl. inhoud)
Profielstalen werktafel
Profielstalen werktafel, bankschroef, afm. 370x90xH 94 cm + afhalen na afspraak (excl. inhoud)
Diverse lijmspanklemmen
Diverse lijmspanklemmen, in 1 palletbox
Mobiele atelierknecht
Gedore, Adjutant, Mobiele atelierknecht, weinig inhoud
Mobiele atelierknecht
Sandvik, Mobiele atelierknecht, weinig inhoud
Mobiele atelierknecht
Sandvik, Mobiele atelierknecht, weinig inhoud
Mobiele vatenkar
Mobiele vatenkar
Kisten diverse hijs/spandbanden
Kisten diverse hijs/spandbanden
Mobiele atelierknecht
Technoflex, RS, Mobiele atelierknecht, afm. 120x50xH 90 cm, v.v. houten werkblad (excl. inhoud)
Mobiele atelierknecht
Technoflex, RS, Mobiele atelierknecht, afm. 120x50xH 90 cm, v.v. houten werkblad (excl. inhoud)
Platenklemmen
Topal, Platenklemmen, 0-20 mm, 1,5 t.
Diverse siliconenpistolen
Diverse pneumatische siliconenpistolen, + 1 CP pneumatische sloophamer, in gereedschapskoffer
Laserliner
Stabiler, RLS, Laserliner + ontvanger + hoogtemeter + statief + meetstok
Pneumatische riveting hammer
Fuji, Pneumatische riveting hammer, z.v.g.
Schroefmachine
Wurth, Schroefmachine, met feeder, 230 V
Diverse werkstuk opspanschroeven
Diverse werkstuk opspanschroeven
Laswagen
Esab, Miggytruc 2000, Laswagen, Mig/Mag lassen, 15-150 cm/min + manual
Bandplooi-ijzer
Bandplooi-ijzer, manueel
Persluchtslangwandhaspel
Zeca, Persluchtslangwandhaspel, diam. 8 mm, 12 mm
Lot
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
900
901
902
903
904
905
906
Number Description
2 Metaalzaagbladen
Metaalzaagbladen, diam. 400 mm
5 Digitale micrometers
Digitale micrometers, 1x 25-50 mm, 1x 50-75 mm, 1x 75-100 mm, 1x 100-125 mm, 1x 125-150
mm + 1x Tesa micrometer, 200-225 mm + 1 kleine diam. binnenmicrometer
1 3D taster
FH, 3D taster, 0,01 mm
4 Diverse schuifmaten
Diverse schuifmaten, digitaal
6 Binnenmicrometers
Binnenmicrometers, diverse diam.
6 Diverse boogkraspennen
Diverse boogkraspennen + 5 ponsslagsets
1 Schuifmaat
Schuifmaat, 0-2000 mm, in houten opbergkist
2 Diverse mobiele luchtcompressors
Diverse mobiele luchtcompressors, 1x Welco, 1x Abac (te herstellen)
5 Metalen gereedschapskisten
Metalen gereedschapskisten + 3 bijzetverlichtingsarmaturen
1 Profielstalen zware lastkar
Profielstalen zware lastkar, afm. 300x120 cm
1 Mobiele metalen kipbak
Mobiele metalen kipbak, inrijgleuven voor vorken, afm. 106x110 cm
1 Mobiele metalen kipbak
Mobiele metalen kipbak, inrijgleuven voor vorken, afm. 107x150 cm, v.v.: onderuitlaat voor
vloeistoffen
1 Profielstalen kar
Profielstalen kar, incl. disser
1 Metal closet
Metal closet, 2 doors, incl. substance: divers diam. drills, with coolingperforation
3 Fietsen
Fietsen, 2x dames, 1x heren
1 Alu trapladder
Alu trapladder, 5+1 treden
1 Stroomverdeelkast
Bos, Unique, year built 2005, serial number 11387, Stroomverdeelkast, 6x 230 V exit, 3x 380 V exit
+ voedingskabel
1 Electro-hydraulic rights for H-profiles
Electro-hydraulic rights for H-profiles, max. cap. 100 t., 380 V, max. profile H.: 300 mm, size
machine: 350x300xH 170 cm
1 Heavy column-type drilling machine
Webo, V613A, serial number 973, Heavy column-type drilling machine, 220/380 V
1 Vertical sanding machine
Webo, R200, Vertical sanding machine, 380 V, max. sandingwidth: 200 mm
1 Elektrische hooglifter
BT, LSV 1400E 24V, Elektrische hooglifter, v.v.: duplexmast, mastH: 220 cm, max H: 335 cm, max.
cap. 1400 kg, vorkL: 132 cm + acculader
1 Elektrische hooglifter
BT, Elektrische hooglifter, max. cap. 1050 kg, max H: 335 cm, v.v.: duplexmast, mastH: 220 cm,
vorkL: 110 cm + acculader
1 Stacker
Clark, C500Y, Stacker, diesel, max. cap. 7000 kg, 4156h on counter, provided with: duplexmast,
mastH: 260 cm + double front tires + full tires + cabine
1 Metalen kast
Lista, Metalen kast, 13 laden, afm.: 72x72xH 162 cm + inhoud: borgpennen en -ringen + Festo
pneumatische leidinghulpstukken + meerpotige stekkers + electromat, relais, schakelaars
Lot
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
Number Description
1 Metalen kast
Lista, Metalen kast, 13 laden, afm.: 72x72xH 145 cm + inhoud: partij deels Festo onderdelen voor
pneumatische installaties
1 Metalen kast
Lista, Metalen kast, 13 laden, afm.: 72x72xH 145 cm + inhoud: divers electromateriaal +
slangklemmen (1/2 kast: leeg)
1 Acculader
Tudor, Tebetrone, Acculader, 220 V, 100 A
1 Acculader
Hoppecke, Trak-air, Acculader, 24 V, 124/60 A
1 Acculader
Akkutechnik, GLW 24/55 Si, Acculader, 24 V, 11/55 A
1 Partij diverse gereedschapshouders
Partij diverse gereedschapshouders, voor zware verspanning, inhoud pallet box
1 Diverse boren
Diverse boren, grote diam., in 7 kisten, op 1 pallet
1 Diverse boren
Diverse boren, grote diam., in 1 metalen kist, op pallet
1 Diverse metaalbewerkingsgereedschappen
Diverse metaalbewerkingsgereedschappen, diverse vorm-groef frezen, spiebaarfreezen,
ungerfreezen, enz., in 4 metalen kisten + 2 dozen, op 1 pallet
1 Diverse metaalbewerkingsgereedschappen
Diverse metaalbewerkingsgereedschappen, diverse freezen, beitelplaathouders, enz., in 6 metalen
kisten, op 1 pallet
1 Diverse metaalbewerkingsgereedschappen
Diverse metaalbewerkingsgereedschappen, w.o.: diverse beitelplaathouders + diverse
centerpunten, in 1 palletbox
2 Hydraulische weegunits
Hydraulische weegunits, 1x 5 t., 1x 35 t. + metalen opbergkoffer
1 Diverse werkstuk opspangereedschappen
Diverse werkstuk opspangereedschappen, in 1 palletbox
1 Diverse zware draaibeitels
Diverse zware draaibeitels, in 1 palletbox
1 Diverse staalkabels
Diverse staalkabels, voor hijswerk, in 1 palletbox
1 Diverse staalkabels
Diverse staalkabels, voor hijswerk, in 1 houten palletbox
2 Tirfors
Tirfors, zonder kabels
1 Tirfor
Tirfor + staalkabel + katrol, 3 wielen, haak
1 Tirfor
Tirfor + staalkabel + katrol, 1 wiel, haak
1 Tirfor
Tirfor + staalkabel
1 Tirfor
Tirfor + staalkabel + katrol, 1 wiel, haak
1 Tirfor
Tirfor + staalkabel + katrol, 1 wiel, haak
1 Tirfor
Tirfor + staalkabel + katrol, 1 wiel, haak
1 Tirfor
Tirfor + staalkabel + katrol, 1 wiel, haak
1 Set hijsvorken
Set hijsvorken, v.v.: 2-sprongketting/vork, afst. tussen vorken: 45 cm, vorkL: 23 cm
1 Set hijsmanipulators
Lot
Number Description
933
1
934
1
935
1
936
19
937
5
938
2
939
2
940
2
941
2
942
1
943
1
944
1
945
1
946
1
947
1
948
1
949
1
950
1
951
1
990
1
991
1
992
1
Set hijsmanipulators, v.v.: 2-spronghijsketting
Set coilhijshaken
Set coilhijshaken, 1 hijsketting/haak
Set coilhijshaken
Set coilhijshaken, 1 hijsketting/haak
Hijsmanipulator
Hijsmanipulator, z.v.g.
Diverse lange metaalboren
Diverse lange metaalboren
Diverse hijshaken
Diverse hijshaken + 5 kabelspanners
Diverse platenklemmen
Diverse platenklemmen, 5 en 6 t.
Diverse platenklemmen
Diverse platenklemmen, tonnage: onbekend
Diverse platenklemmen
Diverse platenklemmen, 3 en 8 t.
Diverse platenklemmen
Diverse platenklemmen, 5 en 3 t.
Kettingtakel
Kettingtakel, max. cap. 1500 kg
Kettingtakel
Kettingtakel, max. cap. 1000 kg
Kettingtakel
Kettingtakel, max. cap. 1000 kg
Buizenplooimachine
Ineco, QB-76V DE, year built 1996, serial number 703146, Buizenplooimachine, 380 V + diverse
buigkoppen
Pipetuner
Arlo, 100 triple grind, year built 2011, Pipetuner, 400 V + 4 div. diam. Headconductors
Acculader
Oldham, Hi Power III, Acculader, 24-80 V
Kantentrekapparaat
Shorte, Kantentrekapparaat, 400 V
Electro-hydraulic bandfoldbench
Electro-hydraulic bandfoldbench, straightener, max. cap. +- 500 t.
Trailer
Renders, 2 Asser met hydraulische oprijramp, Trailer, with tiller, size plateau: 720x255 cm, max. 19
t., rampL: 500 cm, provided with: 2 hydraulic dots on the back (papers ?)
Trailer
Nooteboom, MCO-54-VVVS, year built 1991, serial number CVO20264, Trailer, MTM 58 t. (72 t. at
30 km/h), plateau extendable: 1505-3155 cm, provided with: hydraulic axes + hydraulic suspension
+ 1st mig 21/01/1991 + certificate of conformity + technical fiche (no original registration voucher,
only copy)
Overhead travelling hall crane
Abus, Overhead travelling hall crane, max. cap. 5000 kg, banisterlength: ca 24,2 m, provided with:
Abus steel-wire hoist, max. cap. 5 t. (excl. remote control)
Overhead travelling hall crane
Abus, Overhead travelling hall crane, max. cap. 3200 kg, banisterlength: ca 24,2 m, provided with:
Abus steel-wire hoist, max. cap. 3,2 t.
Iron profile flow construction for overhead cranes
Abus, Iron profile flow construction for overhead cranes, damaged, L: ca 90 m, H: ca 7,7 m, incl.
flow- and electricityrails
Combination 990 - 992
993
1 Overhead travelling hall crane
DS, Overhead travelling hall crane, max. cap. 2x 10 t., banisterlength: ca 27,6 m, provided with: 2
Lot
Number Description
994
1
1001
7
1002
2
1003
70
1004
1
1005
1
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
Demag steel-wire hoists, max. cap. 10 t.
Overhead travelling hall crane
DS, Overhead travelling hall crane, max. cap. 2x 10 t., banisterlength: ca 27,6 m, provided with: 2
Demag steel-wire hoists, max. cap. 10 t.
Gegalvaniseerde roostervloeren
Gegalvaniseerde roostervloeren, afm. ca 110x120 cm + diverse roosterrestanten, in
draadcontainer, incl. container, op bordes
Lasmanipulators
Lasmanipulators, elektro motorisch aangedreven, v.v.: frequentie omvormer, op bordes, z.v.g.
Welding jigs
Welding jigs, on 10 materialwagons, iron + 5 extra materialwagons + railsystem + on steps
Hydraulisch frontbord
Hydraulisch frontbord, voor vorkheftruck, v.v.: lepels, met opgelast frame, op bordes
Remains substance steps
Remains substance steps, exists of: divers iron materialbarrels + defective welding machines +
metalremains + control systems + old fire extinguishers + defective machineparts + …, on indication
Troostwijk
Combination 1001 - 1005
1 Dolly
Dolly, 1 axis, provided with: leafsuspension
1 Frontbord
Frontbord, v.v. kip-laadbak
1 Nivelleerbak
Nivelleerbak, br.: 145 cm + 1 oude tandengraafbak + 1 verroeste graafbak
1 Plaatstalen stapelcontainer
Plaatstalen stapelcontainer, afm. 140x115xH 83 cm
1 Materiaalkast
Materiaalkast, 2-deurs + 4 diverse garderobekasten + 4 tafels en stoelen
1 Plaatstalen kipbak
Plaatstalen kipbak, afm. 156x184xH 90 cm, v.v.: vorkheftruckgeleiders + hijsogen
1 Tuintafel
Tuintafel + 4 frames, 1-zit, metaal + 1 bijzettafeltje, gezandstraald, niet geverfd
1 Lengtehijsbalk
Lengtehijsbalk, v.v.: vorkheftruckgeleiders, balkL: 350 cm
1 T-clamping table
T-clamping table, piece demolished, size 350x200xH 35 cm
1 Partij houten palletten
Partij houten palletten, dienstig als brandhout + alle houtrestanten in hal
10 Afbakeningspalen
Afbakeningspalen, kleur: geel-zwart, H: 132 cm
1 Partij diverse roostervloer
Partij diverse roostervloer, gegalvaniseerd, op 3 palletten
1 Airless
Binks, MX 123 FL, year built 2012, Airless, v.v.: spuitpistool, verfmenger
1 Inhoud verflokaal
Inhoud verflokaal, bestaande uit: ontvettingstafel + materiaalkast + werkbank + 4 legbordstellingen,
v.v.: rooster, gelast + partij aangebroken potten verf, zijnde volledig inhoud van lokaal (excl. airless)
1 Wandhaspel
Zeca, Wandhaspel, v.v.: luchtdarm
2 Profielstalen materiaalwagens
Profielstalen materiaalwagens
1 Dubbel railsysteem
Dubbel railsysteem, v.v.: haken voor spuitcabine, L: ca 2x 18 m
1 Dust exhausting installation
Dust exhausting installation, size 500x185xH 540 cm, incl. dust exhausting tubes + peripheral
Lot
1024
1031
1032
Number Description
equipment
1 Luchtcompressor
year built 1988, Luchtcompressor, 380 V, op drukvat, max. cap. 500 l
1 Lot various plates
Lot various plates, substance of 9 plateracks, exists of: alu plates + inox plates + iron plates
9 Plateracks
Plateracks, stackable, 6 levels, size 435x150xH 340 cm
Combination 1031 - 1032
1033
1034
1 Lot of divers tubes
Lot of divers tubes + profiles + HPL, substance of 8 armracks: iron, inox, alu
7 Profielstalen armstellingen
Profielstalen armstellingen, dubbelzijdig, gelast + 1 enkelzijdige armstelling
Combination 1033 - 1034
1035
1036
1037
1 Lot of metal remains
Lot of metal remains, semi-finishes products, …, in 3 racks, on 7 pallets
1 Lot of divers plates
Lot of divers plates, in: iron, inox, alu + lot of semi-finished products
5 Divers iron profile plateracks
Divers iron profile plateracks, divers sizes
Combination 1036 - 1037
1038
1039
1040
1041
1200
1201
1202
1203
1204
1205
1206
1207
1 Lot heavy iron profiles
Lot heavy iron profiles, exists of: HEA-beams + tubeprofiles + U-profile, steamrolled + L-threecornered tear + HEB-beams/ HEM-beams + IPE-beams and tubeprofiles/ painterprofiles + incl. iron
floorplate
1 Lot divers iron profile
Lot divers iron profile, under which: flat, corner, étui + round + pipes + tubes + flat iron + square + … = everything on floorplate, in armrack, compartment rack, double tuberack, profile rack , stack
basket + incl. floorplate and racks
1 Lot inox tubes
Lot inox tubes, flat boards, under which: inox-316 in 4 racks + incl. racks
1 Big lot metalremains
Big lot metalremains + tipper with: scrap, materialsupports in metal, heavy I-profiles, semi-finished
products, iron frames, extractionistallationcomponents, etc… = everything in hall 3 (not nummered
apart), on indication Troostwijk
Combination 1031 - 1041
1 PC-configuratie
Dell, Dell Precision 490, PC-configuratie + flat-screen + klavier & muis
1 Copier
Canon, PC 760, Copier
2 Hoge metalen dossierkasten
Hoge metalen dossierkasten, 2-deurs, afm. 120x43xH 198 cm, v.v.: verticale pvc rolluiken
1 Partij kantoormeubilair
Partij kantoormeubilair, w.o.: 1x bureautafel, stoel + 2x diverse mobiele ladenblokken + 2x Ahrend
lage dossierkasten, afm. 80x45xH 75 cm + 1x Ahrend dossierkast, 1-deurs, afm. 80x45xH 110 cm
+ 1x Ahrend dossierkast, 2-deurs, afm. 80x45xH 110 cm + 1x vergadertafel, 4 stoelen
1 PC-configuratie
Fujitsu-Siemens, Ovenic Pentium 4, PC-configuratie + flat-screen + klavier & muis
1 All-in-one
Canon, MF 4690 PL, All-in-one
2 Diverse mobiele ladenblokken
Diverse mobiele ladenblokken + 1x mobiele bureaustoel + 1x Ficus kamerplant, in pot
1 Metalen dossierkast
Bureau-Modern, Metalen dossierkast, 2 verticale pvc roldeuren, afm. 120x45xH 198 cm + 14
ladenblokken, afm. 50x70xH 135 cm
Lot
1208
1209
1210
1211
1212
1213
1214
Number Description
1 Metalen dossierkast
Ahrend, Metalen dossierkast, 2 verticale pvc roldeuren, afm. 120x45xH 193 cm + 4x Ahrend
metalen dossierkasten, halfhoog, 2x dossierkasten met 2 pvc roldeuren, afm. 120x45xH 110 cm
1 Copier
Nashuatec, Aficio 2205, Copier
1 Bureau-configuratie
Bureau-configuratie, 2 pers. (T-opstelling), afm. 400x200 cm + bureautafel, 200x80 cm + 3 diverse
mobiele ladenblokken + 2 mobiele bureaustoelen
1 PC-configuratie
Thinkcentre, M-series, PC-configuratie + flat-screen + klavier & muis + Samsung laserprinter
1 PC-configuratie
Dell, Pentium D, PC-configuratie + flat-screen + klavier & muis
1 Laptop
Acer, Aspire 1350, Laptop, lader, divers kantoormateriaal: papierersnipperaar + klassementbakje +
espressomachine + labelprinters + oude GSM's + stempels + enz...
1 Metalen kast
Metalen kast, 2-deurs, incl. inhoud: divers bureaumateriaal
General conditions Online Auction TroostwijkAuctions.com
Article 1 Definitions
Website:
User:
Troostwijk:
Purchase Sum:
Registration:
Bid:
Lot:
Auction:
the website www.TroostwijkAuctions.com, which is maintained an operated by Troostwijk Veilingen B.V., with its registered
seat in Amsterdam;
the one who has registered on the Website;
Troostwijk NV, Desguinlei 22 box3, B-2018 Antwerp (tel. +32(03).287.62.62). and/or its subsidiary/ies or sister company/ies as
reported on the Website;
the amount of the highest – allocated – bid increased by:
- the mark-up above the highest bid and
- the V.A.T. owed
registration of User on the Website by means of filling in completely the registration form found on the Website;
each amount bid by User in the auction for a lot;
an article, or a number of articles that are auctioned together (under one number);
the public sale of moveable goods organized by Troostwijk through a technical way for
communication at distance, namely via the internet; the physical moveable goods, assigned in the presence of a bailiff.
the one who has commissioned a Lot to be auctioned; namely the vendor
the User to whom the Lot is allocated;
the agreement between Troostwijk and the User;
Seller:
Purchaser:
User’s
Agreement:
Purchase
the purchase agreement between the Purchaser and the Seller;
Agreement:
Delivery:
the actual delivery of the Lot to the Purchaser or to his authorized representative;
General Terms the General Terms and Conditions for access to and use of the Website;
and
Conditions for the
User:
General Online these General Terms and Conditions;
Auction Terms
and
Conditions:
Specific Online the additional, supplementary to or in departure from the General Terms and Conditions for the User and the General Terms
Auction
and Conditions of the Online Auction, valid terms and conditions, as reported on the Website for the Auction in question;
Terms and
Conditions:
Allocation:
the declaration by Troostwijk that a Lot or combination of Lots has been allocated, in the
presence of a bailiff, to the highest bidder upon payment of the Purchase Price.
Article 2. Applicability
2.1 The General Online Auction Terms and Conditions are applicable to the relationship between Sellers or Users on the one hand and Troostwijk
on the other in the participation in Auctions.
2.2 The applicability of General Terms and Conditions other than the present one, General Terms and Conditions for the User and the Specific
Terms and Conditions of the Online Auction, is excluded.
Article 3. The Auction
3.1 Troostwijk reserves the right to cancel an Auction, to terminate an Auction earlier than reported on the Website or to extend one. In case of a
technical malfunction of the Website, causing it to be not completely accessible and/or inaccessible to Users, Troostwijk has the right to
extend the Auction by 24 hours.
3.2 The User states by his Registration that he is familiar with and agrees with the special circumstances of an internet auction and with the
technical imperfections that can arise. Troostwijk denies any liability for whatever damage that may arise in any way, directly or indirectly,
including but not limited to the damage arising from the use of the Website, unless there has been deliberate or conscious negligence by
Troostwijk. More particularly, Troostwijk accepts no liability for any damage whatsoever that arises in any way by or from:
- actions performed by the User that may have been inspired by the information placed on the Website;
- the impossibility of using the Website (completely) and/or another malfunction in the Website or the supporting system;
- the Lots not meeting the specifications as reported on the Website;
www.TroostwijkAuctions.com
- the fact that the information on the Website is incorrect, incomplete or out of date;
- errors in the software of the Website and/or the supporting system;
- the unlawful use of systems, including the Website of Troostwijk, by a third party;
- actions by the Seller after the User has concluded a Purchase Agreement with the Seller.
Article 4. Organization of the Auction
4.1 The organization, preparation and carrying out of the Auction is to be done by Troostwijk. The assignment is done in the presence of a bailiff,
approached for this matter.
4.2 Without having to give any reason, Troostwijk has the authority before or during the Auction:
- not to recognize a Bid as such;
- to exclude one or several Users from the Auction;
- to collect objects into Lots, to split Lots or to remove Lots from the auction;
- to repair mistakes made by Troostwijk in offers and/or allocations, without the User being able to make use of these errors and/or derive any
rights from them;
- to take other measures that are, in its judgement, necessary.
4.3 Troostwijk has the authority to set as a condition for participation in certain Auctions and/or bids on certain Lots that a User provides a bank
guarantee, on behalf of Troostwijk, beforehand to the satisfaction of Troostwijk. (dit groen betekent wel : tot genoegdoening van Troostwijk!!!)
4.4 The executing bailiff settles without appeal the controversy of any nature, ensueing the Public Auction, and among others concerning the
amount of the bids and the highest bidder, to be known as the buyer.
4.5 The supervisory bailiff is authorized to control the identity of the buyer through external data banks (bases) and to verify the correctness of the
registration data. The bailiff also is able to control the site from where the Buyer is connected through is IP address (Internet Protocol
Address) and-or his e-mail address.
Article 5. Bids; Purchase Agreement
5.1 The User can place a Bid on the Website on one or several Lots. Every bid is unconditional, irrevocable and without reservation. Through
bidding, the Buyer accepts the present conditions and he commits himself to buy the lots, to be sold, at the price he offered. Troostwijk and/or
the Seller and/or the executing bailiff are entitled to reject bids without giving any reason. Bids are placed exclusive of mark-up and V.A.T.
Troostwijk or the Seller are entitled to place bids.
5.2 If a Lot is also brought to auction together with one or several other Lots as a combination, this will be reported on the individual page of the
Lot. In that case, bids can be placed first on the individual Lots of the combination and after the closing of all individual Lots, bids can be
placed on the combined Lot. Individual Lots can be allocated only if the total amount of the highest sustainable bids on the individual lots is
higher than the highest sustainable bid on the combination. The combination will be allocated solely if the highest sustainable bid on the
combination is higher than the total amount of the highest sustainable bids on the individual lots.
5.3 Bids can be placed in the form of a ‘static bid’ or ‘proxy bid.’ In a static bid, the User places a bid in the form of a fixed amount per Lot. In a
proxy bid the User indicates the maximum price he is prepared to pay for the Lot. The auction system sees to it that, after outbidding by a third
party, the minimally possible higher bid is introduced in the name of the User, as long as the maximum indicated by the User has not been
reached. A proxy bid can be eliminated by the User solely by placing a static bid that at that moment is the highest bid.
5.4 The Purchase Agreement arises through Allocation. Allocation is generally given to the User who has made the highest Bid. By applying
article 5.1, through conditions for allocation as included in the Specific Terms and Conditions of the Online Auction or for other reasons at the
discretion of Troostwijk and the executing bailiff , a Lot can be allocated to a different User who has placed the highest sustainable Bid.
5.5 The Purchaser receives confirmation within 48 hours after the Auction has been closed (not including Saturdays, Sundays and holidays) by email on behalf of the Seller(s) that the Purchase Agreement has been made. If the User does not receive any e-mail within the period
mentioned above, this means that his Bid has not been accepted. Troostwijk and/or the executing bailiff then has(ve) the right not to allocate
or not to allocate under suspensive condition(s).
5.6 The risk of the Lot(s) is transferred to the Purchaser at the moment of Allocation.
5.7 Troostwijk is not a party to the Purchase Agreement but merely mediates in the creation of purchase agreements. The Auction takes place in
the name of and for the account of the Seller. Troostwijk shall not be liable in respect of any warranty, representation, indemnity, covenant,
undertaking, certificate, advice, valuation, defect, liability under any statute or legal principle or otherwise arising out of or in connection with
the sale and purchase transaction contemplated by the Purchase Agreement.
5.8 The Action takes place in the presence of a bailiff, who is charged with the supervision of the Public Auction and the offers placed, as well as
the allocations. In accordance with the legal stipulations, the executing bailiff will draw up a report.
Article 6. Guarantees, claims and indemnities
6.1 In respect of the Lots and possible claims of third parties to these, Troostwijk
and/or the Seller and/or the bailiff will provide no single guarantee of whatever kind.
www.TroostwijkAuctions.com
The Pur-chaser waives all rights except those that are his by mandatory law.
6.2 The Lots are sold for what they are worth in the state in which they are found on the
date of Allocation with all benefits and burdens attached thereto. The Purchaser is
assumed to have carefully investigated the Lot bought by him beforehand.
Troostwijk and/or the Seller and/or the bailiff do not give any indemnity of any kind
for visible or hidden defects or any kind of guarantee in connection with
completeness, numbers, functioning, usability, saleability, the existence or nonexistence of rights of third parties and/or the possibility of transfer to third parties.
No right of discount, damages and/or any other remedies shall be available to the
Purchaser with respect to defects of whatever kind or disappointed expectations of
the Purchaser and/or receiving third parties. As the lots could be visited before the
Auction and the Online Conditions were known, the Buyer is supposed to have
examined carefully the lots he bought, and being informed about the state of the
lots.
6.3 The Purchaser indemnifies Troostwijk against every claim by a third party in
connection with the Purchase Agreement.
6.4 The buyer extricates Troostwijk and/or the seller and/or the bailiff against all
responsibility of a third concerning the contract.
6.5 The buyer does not have the right to renounce at the purchase of the lots, allocated
to him.
6.6 All information about the lots in the catalogue, brochures or any other
communication written by Troostwijk, and especially their description, are procured
as information under complete reserve. Nor Troostwijk, nor the seller, nor the bailiff
can be held responsible.
6.7 The bidder accepts without appeal the dispositions of art. 1649, 1684 and 2280 of
the Belgian Civil Code.
Article 7. The Purchaser’s payment obligations
7.1 The Purchaser has the obligation to transfer the Purchase Price to an account number to be indicated by Troostwijk within three days (not
including Saturdays, Sundays and holidays) after confirmation of the Purchase Agreement. Payment should be made in euros or in another
currency to be indicated by Troostwijk.
7.2 In the event of a late payment of the Purchase Price, an amount corresponding to 15% of the Purchase Price, being a forfeit amount for
collection costs and/or extrajudicial costs will be charged to the Purchaser by Troostwijk. Further, in the event of late payment of the Purchase
Price, interest will accrue on the outstanding amount according to Section 6 of the Swedish Interest Act, starting on the day on which the
payment should have occurred until the day of effective payment.
7.3 Payments are intended first to decrease the costs, then the interest charges, then finally the Purchase Price.
Article 8. Viewing days, auction days, delivery days
8.1 Whoever enters the buildings and grounds on viewing days or on the day of delivery does so entirely at his own risk. The instructions of
Troostwijk and/or persons called in by Troostwijk are to be followed. Troostwijk, the Seller and the bailiff do not accept any liability for
damages arising from entering the buildings or grounds.
8.2 Each person attending shall be held liable for any damage caused by him during the viewing, auction, dismantling and removal.
Article 9. Delivery
9.1 If and as soon as the Purchaser has met all his payment obligations, the Purchaser can pick up the Lot(s) in question during the hours and at
the place specified by Troostwijk, after having showed a proper identification. This is the Delivery. The Buyer is obligated to pick up the Lot
(s) no later than the date specified in the Specific Terms and Conditions of the Online Auction. Troostwijk can stipulate that (a) certain Lot(s)
can be picked up only after other Lots have been delivered.
9.2 After delivery, the purchase agreement cannot be cancelled by the buyer.
9.3 If it appears that a Lot cannot be delivered because of claims by third parties or because of the fact that the delivery would cause
unacceptable damage to the buildings or premises where the Lot is situated or for other reasons appears to be strongly objectionable,
Troostwijk is authorized to terminate the Purchase Agreement. This termination occurs by e-mail and/or registered letter to the Purchaser at
the address supplied by the Purchaser. Troostwijk and/or the Seller shall not be liable to pay damages or any other compensation to the
Purchaser with respect to such termination.
9.4 The Purchaser whose Lot(s) hinder the picking up of other lots is obligated to see to it immediately after reception of an e-mail or other
www.TroostwijkAuctions.com
written documents from Troostwijk that the Lot(s) are picked up. The arranging of possible storage by third parties is at the Purchaser’s own
charge and risk.
9.5 The Purchaser is obligated to dismantle or demolish his Lot(s) and to pick them up. He is completely liable for damage done to the property
of others in connection therewith. He is further obligated to indemnify Troostwijk and the Seller against all claims by third parties arising from
the dismantling, demolishing and/or the picking up of the Lot(s).
9.6 During the dismantling, demolishing and picking of the Lot(s), the Purchaser is obligated to follow the instructions of Troostwijk and/or
persons called in by Troostwijk.
9.7 The Purchaser is obligated to see to it that he or whoever takes care on his behalf of the dismantling, demolishing or transport has the
proper required permits. Troostwijk and/or the Seller cannot be held accountable for the lack of the necessary documents and/or the
infringement of governmental regulations in the dismantling, demolishing and/or transport by or on behalf of the Purchaser.
9.8 In situations in which it is/appears necessary to dismantle buildings for (an) allocated Lot(s), this can occur only through prior consultation
with and written authorization from Troostwijk and under these terms and conditions set in the granting of permission.
9.9 If Troostwijk stipulates such, a deposit will be made in connection with possible damage to the buildings. If such damage occurs, the deposit
will be applied to the payment for repair of the damage, subject to the obligation of the Purchaser to pay compensation for more damage. If
no damage results, the deposit will be restored to the Purchaser.
9.10 If Troostwijk, for any reason whatsoever, is due to reimburse the amount(s) already paid, no interest will be charged on the these sums.
Article 10. Termination
10.1 If the Purchaser does not fulfil any obligation in the Purchase Agreement, including (but not limited to):
(i) not paying the Purchase Price or not paying it completely on time;
(ii) not picking up the Lot(s) on time and/or
(iii) not providing the information required before delivery,
the Purchaser is legally in default without further notice of default being required, and Troostwijk can terminate the Purchase Agreement on
behalf of the Seller. In that case Troostwijk is free to allocate the Lot(s) to another party without Troostwijk and/or the Seller being liable for
any damages.
10.2 In case of termination as intended in 10.1, the Purchaser in default must pay, in addition to the mark-up, a forfeit amount of 25 % of the
Purchase Price to cover administrative, storage, insurance and transport costs, etc., subject to the right of Troostwijk and/or the Seller to
demand complete compensation for damages.
Article 11. Liability
11.1 The liability of Troostwijk, if and insofar as the other remaining stipulations of the General Terms and Conditions of the Online Auction, the
Terms and Conditions for the User and (if applicable) the Specific Terms and Conditions of the Online Auction are applied, will still be
limited to the amount payable to Troostwijk under the liability insurance maintained by it with respect to the damage in question, or, if it is
less, to the invoiced commission amount. This limitation does not apply in the event of deliberate or gross negligence by Troostwijk.
11.2 Troostwijk and/or the bailiff is/are not liable for indirect or consequential loss. Further, all liability of Troostwijk in connection with any defect in
the Lot(s) or in respect of (alleged) infringement of the rights of (the intellectual property of) third parties is excluded. The Purchaser declares
that he is familiar with the fact that, in respect of Lot(s), possible rights (of intellectual property) rest with third parties.
11.3 In consulting with third parties, Troostwijk will take the necessary caution into consideration. Troostwijk is also not liable for possible
shortcomings of these third partie
Artikel 12. Adjustments; Effect
12.1 If and insofar as any stipulation of the General Terms and Conditions of the Online Auction is null and void or is nullified, the remaining
stipulations will remain undiminished in force. Troostwijk and/or the executing bailiff will fix a new disposition to replace the null/cancelled
disposition, observing as good as possible the tenor of the null/cancelled dispostion.
12.2 Troostwijk and/or the executive bailiff can, in addition to these General Online Auction Terms and Conditions, declare the Specific Online
Auction Conditions to be applicable. Notification of the Specific Online Auction Terms and Conditions will be made before the Auction. If and
insofar as the Specific Online Auction Terms and Conditions are in contradiction with the General Terms and Conditions of the Online
Auction, the Specific Online Auction Terms and Conditions will have preference.
12.3 Departure from these General Terms and Conditions of the Online Auction is permitted only if is fixed in writing by an authorized
representative of Troostwijk.
12.4 Troostwijk and/or the executive bailiff reserves the right to amend these General Terms and Conditions of the Online Auction. Amendments
will take effect 24 hours after these have been sent by e-mail to the User. These terms and conditions replace all previous general terms and
conditions, unless explicitly stated otherwise by Troostwijk and/or the executive bailiff.
www.TroostwijkAuctions.com
Article 13. Applicable law
13.1 Belgian law is applicable to these General Terms and Conditions of the Online Auction and the legal relationships that are associated with
the Auction.
13.2 The Dutch text of the General Terms and Conditions of the Online Auction is the original text. In the event that the General Terms and
Conditions of the Online Auction are used in several languages, the Dutch text will therefore be given preference in case of lack of clarity or
contradictions.
13.3 Any dispute, controversy or claim arising out of or in connection with these General Terms and Conditions of the Online Auction and/or the
legal relationships that are associated with the Auction, or the breach, termination or invalidity thereof, shall be finally settled by arbitration in
accordance with the Rules for Expedited Arbitrations of the Arbitration Institute of the Antwerp Chamber of Commerce.
www.TroostwijkAuctions.com
About Troostwijk
Did you know?
- we organise auctions in 23 countries
- we have 1,5 million page views on a top day
700 Auctions
Statistics
Troostwijk conducts
annually 700 auction sales
all over Europe
- Every year we deal with 50.000 bidders
- from 89 different countries
- over 350.000 registrations
15 Countries
80 Years
Troostwijk has
own offices
in 15 European countries
Troostwijk is conducting
auctions since 1930 and
has 80 years of experience
www.TroostwijkAuctions.com