REVEN SIB LED
PENDANT DIRECT/INDIRECT
W W W . L U M E N W E R X . C O M
DESCRIPTION
PROJECT:
Reven SIB (Standard Indirect
Batwing) is a linear LED pendant
and wall luminaire with a thin,
TYPE:
articulated profile. Using advanced
NOTES:
LED engines and optical control, Reven
provides wide spread uplight and
well controlled downlight. This highly
efficient and comfortable illumination is offered in a wide
range of light distributions together with comprehensive
electrical and controls options. Please see additional
specification sheets for Reven ICL with independently
controllable light distribution, as well as other mounting
Cable - shown with PMO optics
arrangements.
up to 105 lm/w performance
ORDER GUIDE
REVPSIB
PMO
LED
LUMINAIRE ID
OPTICS
LIGHT SOURCE
CRI
LUMEN PACKAGES
COLOR TEMP.
LIGHT DISTRIBUTION
REVPSIB - reven
PMO - precision
LED - high performance LED
80 - 80CRI
750 - low output 750lm/ft
30 - 3000k
80-20 - 80% down - 20% up
pendant standard
micro-prism Optic
90 - 90CRI
875 - medium output 875lm/ft
35 - 3500k
60-40 - 60% down - 40% up
1000 - high output 1000lm/ft
40 - 4000k
30-70 - 30% down - 70% up
indirect batwing
LUMINAIRE LENGTH
VOLTAGE
DRIVER
ELECTRICAL
MOUNTING
#FT - nominal length in feet
120 - 120V
D - dimming 0-10V
1 - 1 circuit
53WAC36 - power 5" + non power 3"
Standard sections - 4', 8' and 12'
277 - 277V
DA - Dali
+#EB - emergency battery pack
white canopy (36" air craft cable)
Continuous Run - for luminaires
UNV - 120V-277V
LA2- Lutron Hi-Lume A - 2 wires 120V
(for min 4' fixture)
55WSW18 - power 5" + non power 5"
over 8'
347 - 347V
LA3 - Lutron Hi-Lume A - 3 wires /EcoS
+#EM - emergency light circuit
white canopy & stem (18" stem)
LEH - Lutron EcoSystem H
+#NL - night light circuit
For all other mountings refer to the
LE5 - Lutron EcoSystem 5
+GTD - generator transfer device
Pendant Mounting Guide.
OTH - other (consult factory)
See page 2 for ordering code detailed information
FINISH
CONTROLS
OPTIONS
W - matte white
ONBOARD
FU - fuse
AL - aluminum
OMS - Motion Sensor & power pack
DC - dust cover
CF# - custom finish specify RAL#
ODS - Daylight Sensor & controller
TB# - T-bar caddy clip specify grid size
WIRELESS
TG# - Tegular caddy clip specify grid size
EWC - EnOcean Wireless Controller
ST - Screw Slots caddy clip
LMC - Lutron Motion Controller
CU - custom
LDC - Lutron Daylight Controller
CROSS SECTION
OPTICS
1 1/2"
3 1/2"
8"
1 1/2"
3 1/2"
8"
REVP - air craft cable
REVP - stem
File Name: REVEN-PENDANT-SIB-SPEC
PMO - Precision Micro-prism Optic
Page: 1 / 6
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
September 7, 2016
REVEN SIB LED
PENDANT DIRECT/INDIRECT
W W W . L U M E N W E R X . C O M
OPTICS
LUMINAIRE LENGTH
PRECISION MICRO-PRISM-OPTIC (PMO) - angled LED array with matte
Reven is made up of standard 4, 8 and 12 foot
aluminum reflectors and precision Micro-Prism Optic (PMO) shielding of 0.1"
sections that may be joined together to create
thick acrylic. Precisely formed pyramidal prisms with a 0.06" square base
continuous run lengths. Nominal run length
provide outstanding control of high-angle brightness. Upper diffuser yields 70/30
required must be noted in the product code. The
indirect/direct distribution. The widespread uplight provides a batwing distribution
minimum individual section available is 2 feet.
with peak intensity at 117º and a peak-to-zenith ratio of 2.7:1; shielding from the
PMO optic provides 45º optical cut off. Upper reflectors create options for a higher
All individual sections are joined together onsite
using the joiner kits provided. LumenWerx offers
downlight component. Reven is suitable for wide row spacing with a comfortable
joiner kits that are extremely simple to work with in
ceiling brightness gradient.
the field and result in a fixture that appears virtually
seamless with no light leak at any connection.
LIGHT SOURCE - LED
Custom Linear array of mid-flux LED’s are mounted directly to the housing for
optimal thermal performance. Available in 3000K, 3500K and 4000K with a
minimum 80 CRI and an option for 90 CRI with elevated R9 value. Color consistency
maintained to within 3 SDCM. LEDs operated at reduced drive current to optimize
efficacy and lumen maintenance.
All LEDs have been tested in accordance with IESNA LM-80-08 and the results
have shown L80 lumen maintenance greater than 60,000 hours. Absolute product
photometry is measured and presented in accordance with IESNA LM-79, unless
otherwise indicated.
PERFORMANCE PER 4' AT 4000K
joining system for Reven
80-20 - 80% down - 20%up
LED output
Color Temp
Watts
Nominal Delivered
Lumens
Efficacy
LPW
ELECTRICAL
low output
4000K
40.5
3000
74
Factory-set adjustable output current electronic
medium output
4000K
50
3500
70
driver with 120-277V AC line input. Dimmable from
Watts
Nominal Delivered
Lumens
Efficacy
(and 70ºC max. case) temperature. At maximum
60-40 - 60% down - 40%up
LED output
Color Temp
LPW
at least 100%-5% with 0-10V control. Rated life (90%
survivorship) of 50,000 hours at 50ºC max. ambient
driver load: Efficiency>84%, PF>0.9, THD<20%.
low output
4000K
33.5
3000
90
medium output
4000K
39
3500
90
(specify 2, 3 or 4 wires), EcoSystem H (100%-1%,
high output
4000K
46.5
4000
86
fade-to-black) and EcoSystem 5 (100%-5%)
dimmable drivers and DALI protocol drivers.
30-70 - 30% down - 70%up
LED output
Other specifiable options include Lutron Hi-Lume A
Color Temp
Watts
Nominal Lumens
Efficacy
LPW
low output
4000K
28.5
3000
105
medium output
4000K
33.5
3500
105
high output
4000K
38
4000
105
EMERGENCY
Factory installed long life high temperature
recyclable Ni-Cad battery pack with test switch and
charge indicator, minimum of 90 minutes operation,
up to 1000 lumens per 4ft (25ºC) emergency lighting
output. Recharge time of 24 hours.
LIGHT DISTRIBUTION
80-20 - 80% down - 20%up
60-40 - 60% down - 40%up
30-70 - 30% down - 70%up
File Name: REVEN-PENDANT-SIB-SPEC
Page: 2 / 6
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
September 7, 2016
REVEN SIB LED
PENDANT DIRECT/INDIRECT
W W W . L U M E N W E R X . C O M
MOUNTING OPTIONS
CONSTRUCTION
Fixtures can be pendant-mounted, using aircraft cables, or stem-mounted.
Housing - Extruded Aluminum 0.075" nominal,
Unless otherwise specified, LumenWerx provides the following hardware:
matte white or silver powder coating. Custom
For cable-mounted fixtures - 53WAC36 (5" white canopy for all power mounting
finishes are also available.
point, 3" white canopy for non power mounting point, and a 36" cable)
End cap - Die cast Aluminum (0.95" nominal)
For stem mounted fixtures - 55WSW18 (5" white canopy for all power mounting
Joiners - male/female system made in Die cast
point, and non power mounting point, and a 18" white stem)
Aluminum (0.95" nominal)
Caddy clips, if required specify under OPTIONS
Interior brackets - Die formed cold rolled sheet
For all other required mounting options, see our Pendant Mounting Guide at
steel 20 gauge thick
www.lumenwerx.com
Reflectors - Flat rolled Aluminum sheet 0.040" thick
precisely die formed, 95% reflective matte white
FINISH
painted
Interior - 95%, reflective matte powder coated white paint
Hanger - Chromed Griplock securely attached with
Exterior - matte white or silver powder coating.
spring steel hardware in end caps and/or joiners
Custom finishes are also available.
Air craft cable suspension - 7x7 braids Aluminum
air craft cable 0.06" thick
CONTROLS
Stem - 0.5" diameter threaded steel tube matte
LumenWerx offers several options for integrating motion and daylight controls into
white or silver powder coating. Custom finishes are
Reven luminaires. Wireless options incorporate a wireless controller/powerpack
also available
into the luminaire, which receives signals from a wireless sensor (by others)
installed in the space. The advantages of the wireless option include greater
WEIGHT
flexibility of control options, sensor coverage, and system integration. Onboard
Reven 4 4ft - 9.91lbs - 4.5kg
options incorporate both the sensor and controller/powerpack. Onboard sensors,
Reven 4 8ft - 19.16lbs - 8.7kg
while inherently simpler, have limitations of control and coverage.
Reven 4 12ft - 28.41lbs - 12.9kg
Onboard
Onboard Motion Sensor and power pack (OMS) provide automatic on and
CERTIFICATIONS
automatic off control, using PIR detection. Sensor is designed to detect fine-motion
ETL - Rated for Dry/Damp locations. Conforms to UL
when installed within 6' of occupants.
Standard 1598 and certified to CAN/CSA Standard
Onboard Daylight Sensor and controller (ODS) provide input for 0-10V dimming
C22.2 No. 250.0.
drivers. Separate switched control of line input is required for on/off control.
DLC - Testing to DLC requirements, for this product,
have been completed by an Accredited Laboratory
and certified by DLC.
Lighting facts - testing products and reporting
performance results according to industry
min 5"
standards.
Location of an Onboard sensor
WARRANTY
Wireless
EnOcean Wireless Controller (EWC) provides both a power pack for presence
detection control and a 0-10V interface for daylight harvesting. EnOcean wireless
sensors (by others) mounted in the room signal the onboard EWC. This option
permits manual on/automatic off (vacancy) control.
Lutron Motion Controller (LMC) and Lutron Daylight Controller (LDC) provide
inputs to Ecosystem drivers. Compatible Lutron wireless motion and daylight
sensors (by others) mounted in the room signal onboard LPC or LDC. This option
permits manual on/automatic off (vacancy) control.
File Name: REVEN-PENDANT-SIB-SPEC
LumenWerx provides a five-year limited warranty
of electrical and mechanical performance of the
luminaires, including the LED boards, drivers, and
auxiliary electronics. LumenWerx will repair or
replace defective luminaires or components at our
discretion, provided they have been installed and
operated in accordance with our specifications.
Other limitations apply, please refer to the full
warranty on our website.
Page: 3 / 6
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
September 7, 2016
REVEN SIB LED
PENDANT DIRECT/INDIRECT
W W W . L U M E N W E R X . C O M
PERFORMANCE AT 80-20 - 80% down - 20%up
750 LUMEN AT 80CRI - LOW OUTPUT
1500
1500
1200
1200
PERFORMANCE PER 4'
LED output
900
900
332
600
664
Color
Temp
Watts
Nominal
Delivered Lumens
LPW
Efficacy
low output
3000K
43
3000
70
low output
3500K
41.5
3000
72
low output
4000K
40.5
3000
74
Color
Temp
Watts
Nominal
Delivered Lumens
LPW
medium output
3000K
53
3500
66
medium output
3500K
51.5
3500
68
medium output
4000K
50
3500
70
600
995
300
1327
300
875 LUMEN AT 80CRI - MEDIUM OUTPUT
1500
1500
1200
1200
PERFORMANCE PER 4'
LED output
900
900
387
600
774
Efficacy
600
1161
300
1548
300
File Name: REVEN-PENDANT-SIB-SPEC
Page: 4 / 6
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
September 7, 2016
REVEN SIB LED
PENDANT DIRECT/INDIRECT
W W W . L U M E N W E R X . C O M
PERFORMANCE AT 60-40 - 60% down - 40%up
750 LUMEN AT 80CRI - LOW OUTPUT
1500
1500
1200
1200
PERFORMANCE PER 4'
LED output
900
900
266
600
532
Color
Temp
Watts
Nominal
Delivered Lumens
LPW
Efficacy
low output
4000K
35.5
3000
84
low output
3000K
34.5
3000
87
low output
3500K
33.5
3000
90
Color
Temp
Watts
Nominal
Delivered Lumens
LPW
medium output
4000K
41.5
3500
84
medium output
3000K
40
3500
87
medium output
3500K
39
3500
90
Color
Temp
Watts
Nominal
Delivered Lumens
LPW
high output
4000K
49.5
4000
81
high output
3000K
48
4000
83
high output
3500K
46.5
4000
86
600
797
300
1063
300
875 LUMEN AT 80CRI - MEDIUM OUTPUT
1500
1500
1200
1200
PERFORMANCE PER 4'
LED output
900
900
310
600
620
Efficacy
600
930
300
1241
300
1000 LUMEN AT 80CRI - HIGH OUTPUT
1500
1500
1200
1200
PERFORMANCE PER 4'
LED output
900
900
354
600
709
Efficacy
600
1063
300
1418
300
File Name: REVEN-PENDANT-SIB-SPEC
Page: 5 / 6
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
September 7, 2016
REVEN SIB LED
PENDANT DIRECT/INDIRECT
W W W . L U M E N W E R X . C O M
PERFORMANCE AT 30-70 - 30% down - 70%up
750 LUMEN AT 80CRI - LOW OUTPUT
1500
1500
1200
1200
PERFORMANCE PER 4'
LED output
900
900
156
600
312
Color
Temp
Watts
Nominal Lumens
Efficacy
LPW
low output
3000K
30.5
3000
99
low output
3500K
29.5
3000
102
low output
4000K
28.5
3000
105
Color
Temp
Watts
Nominal Lumens
medium output
3000K
35.5
3500
99
medium output
3500K
34.5
3500
102
medium output
4000K
33.5
3500
105
Color
Temp
Watts
Nominal Lumens
high output
3000K
40.5
4000
99
high output
3500K
39
4000
102
high output
4000K
38
4000
105
600
468
300
624
300
875 LUMEN AT 80CRI - MEDIUM OUTPUT
1500
1500
1200
1200
PERFORMANCE PER 4'
LED output
900
900
182
600
364
Efficacy
LPW
600
546
300
728
300
1000 LUMEN AT 80CRI - HIGH OUTPUT
1500
1500
1200
1200
PERFORMANCE PER 4'
LED output
900
900
208
600
416
Efficacy
LPW
600
624
300
832
300
File Name: REVEN-PENDANT-SIB-SPEC
Page: 6 / 6
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
September 7, 2016