POLLAK
POL/3280
Ignition Starter Switches
31-114
31-602
31-242
31-610
Base Type
M/H/P
REPLACEMENT KEYS & LEVERS
Replacement keys for 31-190, 31-610, 31-302, 31-345, 31-297.
Part No. 31-332, Encapsulated (Pollak logo), 2 keys per ring.
Part No. 31-339, Encapsulated (No logo), 2 keys per ring.
Replacement zinc die-cast lever and zinc plated set screw.
Part No. 51-308.
4-POSITION SWITCHES
31-103
1
31-104
1
31-105
1
31-111
1
31-159
1
31-180
1
31-190
1
31-196
1
31-233
1
31-607
1
31-608
1
31-610
1
31-242
2
31-257
2
31-114
3
31-249
3
31-289
3
31-322
3A
31-139
3A
31-191
3A
31-359
3
3-POSITION SWITCHES
31-253
1
31-192
1
31-609
1
31-302
2
31-345
2
31-337
3
31-164
3
31-297
3A
31-285
3A
31-600
4
2-POSITION SWITCH
5
31-288
31-602
5
31-604
5
31-117
6
N
N
Y
N
N
N
N
N
Y
N
Y
Y
Y
Y
N
N
N
Y
N
Y
N
Pollak
Pollak
Pollak
No
None
L/Cyl Mfg
No Key
Pollak
Lever
Lever
Pollak
Pollak
L/Cyl Mfg
Pollak
Pollak
Encap Key
L/Cyl Mfg
L/Cyl Mfg
None
Various
PK556
Various
L/Cyl
Special
Various
Universal
Universal
No L/Cyl
Universal
Universal
D250
Various
PK556
No L/Cyl
D250
Various
Various
Various
0
0
0
0
1
2
1
1
0
0
0
1
1
1
0
0
0
1
0
1
0
2
2
2
1
3
5
4
4
2
2
1
4
4
5
1
1
1
5
Spc.
5
3
N
N
N
Y
N
Y
N
Y
N
N
Lever
D250
No L/Cyl
Blank
Various
Pollak
Universal
Pollak
Universal
Pollak
D250
No L/Cyl
Pollak
Universal
L/CYL Mfg
D250
Pollak
Various
1
0
0
1
1
1
0
1
2
0
5
1
2
5
4
5
3
4
5
0.75”D
0
0
0
0
2
0.75”D
.75”D
2
N
N
N
N
Pollak
None
Lever
No
PK580
Various
L/Cyl
Marine Starter Switches (For Magneto Applications)
•Magneto grounded in “Off” position •Glass filled Delrin Housing, Stainless Steel terminals •Molded Velox base •13/16” diameter mounting bushing •Special weather
proofing seal and drain hole •Furnished with Terminal Hardware, mounting nuts and 2 keys
Part No. 33-105
Special “Push to Choke” feature
eliminates need for separate
Electronic Choke Switch. Switch
mounts in panels up to 1/4” thick.
Replaces Johnson-Evinrude Numbers
mbers
388173, 390129 and 390133.
Part No. 33-104
Special long brushing allows mounting in panels up
to 1-1/4” thick. Replaces Johnson-Evinrude Numbers 386496, 379047 and 378238. Blank key.
Part No. 33-107
Same as #33-104 except all switches keyed alike.
Battery Master Disconnect Switches (Designed for 12 VDC Vehicles)
BATTERY MASTER DISCONNECT SWITCHES - 2 STUD TERMINALS
Designed for 12 VDC vehicles (Truck, Automotive, Marine, RV) to disconnect all circuitry to
reduce possibility of theft and accidental electrical fires. Lever Operated- 6-36 Volt- 180 Amps
continuous capacity 1000 amps in Rush S.P.S.T. (Off-On). Two stud terminals for battery
circuit only. Does not disconnect alternator or generator field circuit. On vehicles equipped with
alternators, engineer must be shut off to avoid potential damage to alternator diodes.
•Incorporates heavy duty contacts. •One piece die-cast housing sealed with O-rings at base
and mounting stem to keep out dust and moisture. •Large die-cast, lever for ease of operation.
•Two 3/8” copper alloy stud terminals with hex nuts and lock washers. •Mounting stem 3/4”
diameter, l/2” long, with two hexnuts and lock washer. (Note: Mounting nuts not to exceed 12 ft.
Ibs. torque). •Fits panels up to l/4” thick.
Part No. 51-902, Lever.
Part No. 51-915, Lever with .25 dia indexing post to prevent rotation and align switch.
Part No. 51-916, Keyed (2 keys included) with .25 dia indexing post to prevent rotation and align
switch.
Face Plate - for use with disconnect switches. Silver self-adhesive mylar
label with black letters. 2½” diameter, 3/4” diameter centre hole.
Part No. 51-303.
greggdistributors.ca
O69
R69
Automotive & Heavy Duty Electrical Products
COMMON FEATURES
•Brass terminals •High Impact Base •Weather resistant O-Ring Seal •Lip Seal prevents moisture
from entering contact chamber •Internally lubricated for longer life •Solid copper contacts and
wiring •Patented starter lockout feature prevents restart of running vehicle (see chart)
Base
Starter
Key
Key
# of Lip Mounting
Part No.
Hole
Type
Lockout
Logo
Code
Seals
Pattern