35-3 Carlough Road, Bohemia NY 11716 Tel: 631 521 7831 Fax: 631 521 7871
4.0 to 8.0 GHz Ultra-Low Noise Amplifier
APT3-04000800-0610-ME3
Features






4.0 to 8.0 GHz Frequency Range
Typical N.F. <=0.5 dB
Gain Flatness < ± 0.5 dB (typical)
Reverse Voltage Protection
State-of-the-Art PHEMT Technology
MIL-883, MIL-45208 construction
and reliability
Applications



Radar Systems
Satellite Communictaion (SATCOM)
Wireless and cellular
Product Description
The APT3-04000800-0610-ME3 is an octave band LNA with an industry low Noise
Figure and Gain Flatness across the entire band . Lower NF options are also available in smaller sub-bands. Compact AmpliTech D-series packages are also available.
Key Specifications at 23°C
Parameter
Unit
Minimum
Typical
Maximum
Notes
Frequency
GHz
4.0
-
8.0
Customizable
Gain
dB
35
37
-
Customizable
Gain Flatness
dB
-
±0.5
±1.0
Customizable
In/Out VSWR
-
-
1.5
2.0
Customizable
Output P1dB
dBm
+10
+11
-
Customizable
DC Power
V@mA
+11
+15
+16
140 mA typ.
Noise Figure
dB
-
0.5
0.6
@23°C
Outline/Package
-
-
-
ME3
35-3 Carlough Road, Bohemia NY 11716 Tel: 631 521 7831 Fax: 631 521 7871
Absolute Maximum Ratings*
Parameter
Unit
Minimum
Maximum
Notes
Operating Temperature (Case)
°C
-40
+95
95% humidity, non-condensing
Storage Temperature (Case)
°C
-54
+115
95% humidity, non-condensing
RF Input Power
dBm
-
+19
CW
Die Junction Temp (Tj)
°C
-
+150
For GaAs devices
Positive Supply Voltage
V
-
+16
At +V DC terminal
Negative Voltage
V
-
-10
Reverse Voltage
*Stresses above those listed under "Absolute Maximum Rating" may cause permanent damage to
the device. This is a stress rating only and functional operation of the device at these or any other
conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Nickel and then plated with Gold to eliminate contamination of other adjacent electronic components.
Page 2
Website: www.amplitechinc.com Email: info@amplitechinc.com
DS-04
Outline Drawing