35-3 Carlough Road, Bohemia NY 11716 Tel: 631 521 7831 Fax: 631 521 7871
Ku-Band Low Noise Amplifier
APT5-127013301515-D6
Features






Applications







Receiver Front End
Radar
Satellite Communictaion (SATCOM)
Microwave Radio Systems
Test Equipment
Telemetry


12.7 to 13.3 GHz Frequency
Range
Typical N.F. < =1.0 dB
Typical Gain >=48 dB
Typical Flatness <= ± 1.0 dB
Reverse Voltage Protection
State-of-the-Art PHEMT
Technology
MIL-883, MIL-45208 construction and reliability
Hermetic Seal Option
Typical 16.1% efficiency
based on NPA (No Power
Added) estimation
Product Description
The APT5-127013301515-D6 is a Low Noise amplifier with low noise figure (<1.5
dB, 1.0 dB typical). Lower NF options are also available with custom flatness,
VSWR, P1dB, and outline. The high performance is an example of AmpliTech’s
industry-leading low-noise design and technology.
Key Specifications at +23°C
Page 1
Parameter
Unit
Minimum
Frequency
GHz
12.7
Gain
dB
45
Gain Flatness
dB
In/Out VSWR
Typical
Maximum
Notes
13.3
Customizable
48
-
Customizable
-
±1.0
±2.0
Customizable
-
-
2.00
2.00
Customizable
Output P1dB
dBm
+15
+19
-
Customizable
DC Power
V@mA
+15
+15
+16
250 ma Max., 210
ma typ.
Noise Figure
dB
-
1.0
1.5
Customizable
Outline/Package
-
-
-
Website: www.amplitechinc.com Email: info@amplitechinc.com
D6
DS-01
35-3 Carlough Road, Bohemia NY 11716 Tel: 631 521 7831 Fax: 631 521 7871
Absolute Maximum Ratings*
Parameter
Unit
Minimum
Maximum
Notes
Operating Temperature (Case)
°C
-54
+85
95% humidity, non-condensing
Storage Temperature (Case)
°C
-54
+115
95% humidity, non-condensing
RF Input Power
dBm
-
19 CW
Input RF Protection
Die Junction Temp (Tj)
°C
-
+150
For GaAs devices
Positive Supply Voltage
V
-
+16
At +V DC Pin
Negative Voltage
V
-
-10
Reverse Voltage
*Stresses above those listed under "Absolute Maximum Rating" may cause permanent damage to
the device. This is a stress rating only and functional operation of the device at these or any other
conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. All
STANDARD units are packaged in Aluminum housings that are layered with electroless Nickel and
then plated with Gold to eliminate contamination of other adjacent electronic components.
Typical Measured Data
Data taken with Agilent N5242 PNA-X Vector Network Analyzer
Page 2
Website: www.amplitechinc.com Email: info@amplitechinc.com
DS-01
35-3 Carlough Road, Bohemia NY 11716 Tel: 631 521 7831 Fax: 631 521 7871
Outline Drawing
Page 3
Website: www.amplitechinc.com Email: info@amplitechinc.com
DS-01