2013 Decal Catalog CONTENTS Genie® Danger Decals................................4 Illustration/Pictoral Decals.........6 Instruction Decals.........................7 Warning Decals.............................8 Miscellaneous Decals...................9 JLG Capacity Decals..............................10 Caution Decals................................16 Control Panel Decals.....................17 Cosmetic Decals.............................33 Danger Decals.................................35 Illustration/Pictoral Decals......... 36 Skyjack® Important Decals.......................40 Instruction Decals......................41 Miscellaneous Decals................43 Warning Decals..........................45 Warning/Danger Decals...........51 Capacity Decals..............................54 Warning Decals..........................61 Caution Decals................................55 Control Panel Decals.................... 56 Danger Decals.................................57 Illustration /Pictoral Decals.........58 Miscellaneous Decals................... 60 2 1-877-JLG-LIFT | www.jlg.com CONTENTS Snorkel® Capacity Decals..............................62 Control Panel Decals.....................63 Danger Decals................................ 64 Illustration/Pictoral Decals..........65 Miscellaneous Decals................... 66 Index By Manufacturer Genie.............................................68 JLG................................................69 Skyjack..........................................74 Snorkel..........................................75 For More Information Visit us online at onlineexpress2.jlg.com Phone: 877-JLG-LIFT Fax: 800-733-8939 1-877-JLG-LIFT | www.jlg.com 3 GENIE® DANGER DECALS GN31508 GN33952 Electric Hazard Plug GN31060 DANGER Do Not Alter Switch Tip-Over Axles Electrocution / Fire Hazard Death or serious injury will result from use of improper or damaged cord and outlet. DANGER Tip-over Hazard Altering or disabling limit switches can result in machine tip-over. Machine tip-over will result in death or serious injury. Connect charger to a grounded AC 3-wire electrical outlet only. Do not alter or disable limit switch(s). Before each use, inspect for damaged cord, cables and wires. Replace damaged items before operating. 31060 C Tilt Alarm GN32932 DANGER DANGER Tip-over hazard. Do not raise boom past horizontal unless both axles are extended. 32932 084A 31508 D GN43091 GN43617 General Safety DANGER Improper Use Hazard 1 2 3 4 5 Avoid hazardous situations. Always perform a pre-operation inspection. Always perform function tests prior to use. Inspect work place. Only use the machine as it was intended. Do not operate unless: You read, understand and obey: -manufacturer’s instructions and safety rules safety and operator’s manuals and decals -employer’s safety rules -applicable governmental regulation You are properly trained to safely operate this machine. Electrocution Hazards Do not alter or disable machine components that in any way affect safety and stability. Do not place ladders or scaffolds in platform or against any part of this machine. Do not use machine on a moving or mobile surface or vehicle. Fall Hazards Do not sit, stand or climb on the platform guard rails. Maintain a firm footing on the platform at all times. This machine is not electrically insulated and will not provide protection from contact with or proximity to electrical current. Minimum Safe Approach Distance Voltage Phase to Phase Feet 0 to 300V 300V to 50KV 50KV to 200KV 10 15 Distance Meters Avoid Contact 3.05 4.60 200KV to 350KV 20 350KV to 500KV 25 7.82 500KV to 750KV 750KV to 1000KV 35 45 10.67 13.72 AB01234 6.10 Do not climb down from the platform when raised. Attach platform entry chain and close entry gate before operating. Do not drive machine on or near uneven terrain, unstable surfaces or other hazardous conditions with the platform raised. Do not place or attach overhanging loads to any part of this machine. 43091 F Line Voltage Required Clearance Avoid Contact 300V to 50KV 10 ft 50KV to 200KV 15 ft 4.60 m 200KV to 350KV 20 ft 6.10 m 350KV to 500KV 25 ft 7.62 m 500KV to 750KV 35 ft 10.67 m 750KV to 1000KV 45 ft 13.72 m 3.05 m Collision Hazards Be aware of limited sight distance and blind spots when driving or operating. Check work area for overhead obstructions or other possible hazards. Be aware of crushing hazard when grasping the platform guard rail. Do not raise platform unless machine is on firm, level ground. avoid drop-offs, holes and unstable or slippery surfaces. Do not operate machine in strong gusty winds. Do not increase surface area of platform or load. Increasing area exposed to wind will decrease machine stability. Maintain required clearance. 0 to 300V Use common sense and planning when operating machine with controller from ground. Maintain safe distances between operator, machine and fixed objects. Description Models with outriggers: Do not raise platform unless machine is level. Death or injury can result from contacting electric power lines. Always contact the electric power line owner. The electric power shall be disconnected or the power lines moved or insulated before machine operations begin. Keep hands and limbs out of scissors. Tip-over Hazards Models without outriggers: Do not raise platform unless machine is on a level surface. 43696 B Electrocution Hazard 43617 017A Crushing Hazards Counterweight uphill: 1 Retract boom. 2 Lower boom. DANGER Batteries are used as counterweight and are critical to machine stability. Each battery must weigh 65 pounds (29.5 kg). Be sure all tire are in good condition, castle nuts are properly tightened and cotter pins are properly installed. 1 2 Electric Hazard GS Tip-over hazard. Failure to replace batteries with proper weight batteries will cause death or serious injury. Use extreme care and slow speeds while driving the machine in stowed position across uneven terrain, debris, unstable or slippery surfaces and near holes and drop-offs. Tip-over Hazard if tilt-alarm sounds, unit is on a severe slope. Death or serious injury could occur. 33952 B DANGER Do not push off or pull toward any object outside of the platform. The operator is responsible for safe machine operation. This includes: Counterweight downhill: 1 Lower boom. 2 Retract boom. GN43696 Tip-Over Battery Failure to read, understand and obey the operator’s manual and the following safety rules will result in death or serious injury. 1 2 GN44255 Crushing Hazard Observe and use color-coded direction arrows on the platform controls for drive and steer functions. DANGER Explosion Hazards Do not start engine if you smell or detect liquid petroleum gas (LPG), gasoline, diesel fuel or other explosive substances. Do not refuel the machine with the engine running. GN44737 Tip-Over Trays Damaged Machine Hazards Do not use a damaged or malfunctioning machine. DANGER Crushing Hazard Contact with moving parts will result in death or serious injury. Be sure all maintenance has been performed as specified in the appropriate operator’s and service manuals Be sure all decals are in place and legible. Be sire safety, operator’s and responsibilities manuals are completed, legible and in the storage container located on the platform. Tip-over hazard. Raising the platform or driving the machine with chassis trays open will result in death or serious injury. Keep away from moving parts. 44255 C Close chassis trays before raising the platform or driving the machine. 44737 B GN46262 Battery Safety Burn Hazards Explosion Hazards contain acid sparks, flames and ∙ Batteries ∙ Keep Always wear protective lighted tobacco away from clothing and eyewear when working with batteries. acid. Neutralize battery acid spills with baking soda and water. charger to a ∙ Connect grounded AC 3-wire electrical outlet only. each use, inspect ∙ Before for damaged cord, cables and wires. Replace damaged items before operating. Improper Use Hazard Failure to read, understand and obey the safety rules will result in death or serious injury. The operator is responsible for safe machine operation. This Includes: 1 2 3 4 5 Avoid hasardous situations. Always perform a pre-operation inspection. Always perform function tests prior to use. Inspect the work place. Only use the machine as it was intended. Do not operate unless: You read, understand and obey: - manufacturer’s instructions and safety rules - safety and operator’s manuals and decals - employer’s safety rules - applicable governmental gegulations 72853 A spilling or ∙ Avoid contact with battery ∙ ∙ batteries. Batteries emit explosive gas. Battery tray should be open during entire charging cycle. Do not contact battery terminals or cable clamps with tools that may cause sparks. Electrocution Hazards GN72853 DANGER DANGER Failure to obey the following battery and charger safety rules will cause death or serious injury. You are properly trained to safely operate this machine. Component Damage contact with hot ∙ Avoid Hazard Lifting Hazard or live electric circuits. proper lifting techniques ∙ Do not use any charger ∙ Use not expose and appropriate number of ∙ Do greater than 24V to charge batteries or charger to 46262 C water and/or rain. people when lifting batteries. batteries. All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 4 1-877-JLG-LIFT | www.jlg.com GENIE® DANGER DECALS SAFETY DECALS GN97547 GN82561 Electric Hazard Use Safety Arm DANGER DANGER ELECTROCUTION HAZARD Engage safety arm before performing maintenance or repair. Crushing Hazard Death or serious injury can result from contact with moving scissor arms. 82561 B See service manual. Death or serious injury will result from contact with this machine should it become electrically charged. KEEP CLEAR 97547 GN97890 General Safety Rules DANGER Failure to read, understand and obey the operator’s manual and the following safety rules will result in death or serious injury. Improper Use Hazard Do not alter or disable machine components that in any way affect safety and stability. The operator is responsible for safe machine operation. This includes: Do not push off or pull toward any object outside of the platform. 1 Avoid hazardous situations. Do not place or attach overhanging loads to any part of this machine. Do not place ladders or scaffolds in platform or against any part of this machine. Do not use this machine on a moving or mobile surface or vehicle. Be sure all tires are in good condition, air-filled tires are properly inflated and lug nuts are properly tightened. 2 Always perform a pre-operation inspection. 3 Always perform function tests prior to use. 4 Inspect work place. 5 Only use the machine as it was intended. Do not operate unless: You read, understand and obey: -manufacturer’s instructions and safety rules safety and operator’s manuals and decals -employer’s safety rules -applicable governmental regulation Fall Hazards You are properly trained to safely operate this machine. Electrocution Hazards This machine is not electrically insulated and will not provide protection from contact with or proximity to electrical current. Minimum Safe Approach Distance Voltage Distance Phase to Phase Feet Meters 0 to 300V 300V to 50 KV 50KV to 200KV Avoid Contact 10 3.05 15 4.60 200KV to 350KV 20 6.10 350KV to 500KV 25 7.82 500KV to 750KV 750KV to 1000KV 35 45 10.67 13.72 Tip-over Hazards Do not raise or extend boom unless machine is on firm, level ground. Do not depend on tilt alarm as a level indicator. Tilt alarm sounds in platform only when machine is on a severe slope. Do not raise boom when wind speeds may exceed 28 mph / 12.5 m/s. Do not operate machine in strong or gusty winds. Do not increase surface area of platform or load. Increasing area exposed to wind will decrease machine stability. Do not drive machine on or near uneven terrain, unstable surfaces or other hazardous conditions with boom raised or extended. Do not drive machine on a slope that exceeds the maximum slope or side slope rating for the machine. Use extreme care and slow speeds while driving the machine in stowed position across uneven terrain, debris, unstable or slippery surfaces or near holes and drop-offs. Do not attempt to free a caught or snagged platform using platform controls. All personnel must be removed from platform before attempting to free platform using ground controls. Occupants must wear a safety belt or harness in accordance with governmental regulations. Attach lanyard to anchor provided in platform. Do not sit, stand or climb on the platform guard rails. Maintain a firm footing on the platform floor at all times. Do not climb down from the platform when raised. Lower the platform entry midrail or close the entry gate before operating. Collision Hazards Be aware of limited sight distance and blind spots when driving or operating. Check work area for overhead obstructions or other possible hazards. Be aware of crushing hazard when grasping the platform guard rail. Observe and use color-coded direction arrows on the platform controls and drive chassis for drive and steer functions. Do not lower the boom unless the area below is clear of personnel and obstructions. Explosion Hazards Do not start engine if you smell or detect liquid petroleum gas (LPG), gasoline, diesel fuel or other explosive substances. Do not refuel the machine with the engine running. Damaged Machine Hazards Do not use a damaged or malfunctioning machine. Be sure all maintenance has been performed as specified in the appropriate operator’s and service manuals Be sure all decals are in place and legible. Be sire safety, operator’s and responsibilities manuals are completed, legible and in the storage container located on the platform. 97890 A All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 5 GENIE® ILLUSTRATION/PICTORAL DECALS GN27204 GN27205 Arrow Blue Arrow Yellow GN27206 GN27207 Triangle Blue Triangle Yellow 27206 B 27204 B 27207 B 27205 B GN28174 GN28171 Power To Platform No Smoking GN27867 GN40434 27867 Swivel Lock Lanyard Anchorage Point Swivel Lock 230V AC 10A 28174 F 28171 E GN43618 Direction Arrows GN44980 Power To Charger 115V GN52475 Transport Tiedown 115V AC 15A 52475 C + 44980 D All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 6 1-877-JLG-LIFT | www.jlg.com GENIE® INSTRUCTION DECALS SAFETY DECALS GN28165 Footswitch Operation GN30080 Max Load 500 lb INSTRUCTIONS Start Engine Operate Functions Stop 28165 C GN72970 Charger Operation GN43089 INSTRUCTIONS INSTRUCTIONS Operate, GCP Emergency Stop Operation Push in red Emergency Stop button to stop all functions and turn machine off. Turn the key switch to ground control. Pull out ground red Emergency Stop buttons to the on position. Be sure battery switch is connected before operating machine. Emergency Lowering Move toggle switch OR pull knob OR push button to lower platform. After Each Use To Position Platform Move the toggle switch according to the markings on the control panel. Drive and steer functions are not available from ground controls. Park machine on a firm, level surface. Remove key to secure from unauthorized use. Chock wheels. Charge batteries. 43089 F Battery Charger Operating Instructions Observe and Obey: · Do not operate the machine with discharged batteries. · Do not operate machine with battery charger plugged in · Do not use external charger or booster battery. · Recharge batteries after each work shift. · Use proper AC input voltage for charging as indicated on charger. · Use only Genie authorized batteries and charger. · Do not expose charger to water or rain. 72970 C GN82559 Annual Inspection Required INSTRUCTIONS · If charger does not come on, press and hold low voltage start switch (if equipped). · The charger will automatically shut off when charging cycle is complete. · Check battery acid level when charge cycle is complete. Replenish with distilled water to the bottom of the fill tube. GN97887 GN82657 Max Side Force ANSI Battery Connect INSTRUCTIONS Battery Connection Diagram + + Annual inspection required. - See service manual for inspection report. - + - + QD1 - + F6 275A 82559 B To Charge Battery: · Be sure battery pack is connected before charging batteries. · Open battery pack compartment. Compartment must remain open for the entire charging cycle. · Remove battery vent caps and check battery acid level. If necessary, add only enough distilled water to cover the plates. · Do not overfill prior to charge cycle. · Replace battery vent caps. · Connect the battery charger to a grounded AC circuit. Batteries (4): Group GC2 Batteries Nominal Voltage: 6V Capacity (20 hour rate): 225AH Dimensions (l x w x h): 10 5 16 in x 7 1 16 in x 117 8 in Maximum allowable side force on platform: 150 lbs / 667 N. Maximum allowable wind speed: 28 mph / 12.5 m/sec. 97887 B 82657 B All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 7 GENIE® WARNING DECALS GN28161 Crush Hazard Hand WARNING Crush Hazard Contact with moving parts can result in death or serious injury. Keep away from moving parts. GN28175 GN28177 Compartment Access Crush Hazard WARNING Compartment access is restricted. Contact with components under any cover may result in serious injury. 28175 H WARNING Crush Hazard Death or serious injury may result from platform crushing personnel against boom. Only trained maintenance personnel should access compartments. Access by operator is only advised when performing Pre-operation Inspection. All compartments must remain closed and secured during operation. Keep away from path of moving platform. 28177 C 28161 C GN28236 Improper Operation GN52865 Annual Inspection WARNING Annual Inspection Record Failure to complete required inspections could result in death or serious injury. AB01234 Description Scheduled maintenance Use the maintenance inspection report in the inspections must be completed as specified in service manual for required recordkeeping. Keep the appropriate serviceAB01234 records on all inspections manual. Description Use this decal to record for four years. Maintenance inspections the date of the annual inspection, the initials of must be completed by a person trained and qualified the inspector and the on the maintenance of this machine owner. machine. 52865 B Model Serial number Date of Inspection Inspected by Machine Owner All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 8 1-877-JLG-LIFT | www.jlg.com GENIE® MISCELLANEOUS SAFETYSAFETY DECALSDECALS DECALS GN28164 Hazardous Materials NOTICE One or more of the following hazardous materials are used on this machine: · Gasoline · Liquid Petroleum Gas (LPG) · Diesel Fuel · Hydraulic Fluid · Antifreeze · Engine Oil · Grease · Lead Acid Battery GN28176 Manual Not Here If Safety Manual, Operator’s Manual or Responsibilities Manual are missing, contact local Genie distributor or Genie Industries. Operate Instructions Tire Size: 12 x 4 ½ 8 in GN43619 Safety Arm Castle Nut Torque: 300 ft/lbs (407 Nm) Safety Arm Be sure cotter pin is properly installed. 43619 017A 43093 B 28176 D 28164 116C GN43647 GN43093 Tire Specs GN44753 LED Readout GN52494 Crush Hazard Rails CAUTION LED Diagnostic Readout Crushing Hazard Falling guard rails could cause injury. 52494 B Maintain firm grasp on platform rails when pulling snap pins. Do not allow platform guard rails to fall. Refer to the appropriate Genie service manual for code descriptions. 44753 017A GN82567 Ground Control Panel GN82366 Chevron Rando GN82239 Latch GN65052 Fault Codes ECM Fault Codes Code Condition -Condition Normal 01 Internal ECM Error 02 ECM/Platform Communication Error 03 Undefined Platform Dip Switch Setting 12 Chassis Up/Down Toggle Closed at Startup 18 Pothole Guard failure 42 Platform Left Turn Switch Fault 43 Platform Right Turn Switch Fault 46 Platform Drive Enable Switch Fault 47 Platform Joystick Fault 52 Forward Coil Fault 53 Reverse Coil Fault 54 Up Coil Fault 55 Down Coil Fault 56 Right Coil Fault 57 Left Coil Fault 58 Brake Coil Fault 59 Parallel/Series Coil Fault 68 Low Battery Voltage LL Off-Level OL Overload Putout Option For more information, please consult the appropriate Genie Service Manual. 65052 G LATCH Chevron Rando® HD equivalent only 7 AMP 82239 A Call Genie Industries for list of equivalent and optional oils. 82366 C GN82447 Auxiliary Lowering Auxiliary Lowering 82447 B STOP 82567 A All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 9 JLG CAPACITY DECALS 1701645 500lb Max Capacity + 100 lb/450 N MAX = 500 lbs 230 kg UNRESTRICTED CAPACITY 500lb Capacity 500lb Capacity CAPACITY 500 LBS UNRESTRICTED 500 lbs 230 kg MAX DOM 1702966 1701645 E 1703469 1703470 Max Tire Load 1703472 Max Tire Load 1703486 Max Tire Load MAX 7870 kg 17350 lbs 1703493 Max Tire Load MAX 3583 kg 7900 lbs 1703482 C 1703475 1703472 B 1703488 Max Tire Load MAX 9163 kg 20200 lbs Max Tire Load MAX 6441 kg 14200 lbs 1703470 B 1703469 B 1703482 1703475 Max Tire Load MAX 5352 kg 11800 lbs MAX 5216 kg 11500 lbs Max Wheel Load MAX 1996 kg 4400 lbs MAX 2767 kg 6100 lbs 1703486 1703488 1703493 1703868 1703694 Capacity 1932E2 Capacity MAX.= 750 LB/ 340 kg 1702966 1702688 MAX.= 500 LB/ 230 kg MAX.= 500 LB/ 230 kg MAX.= 250 LB/ 110 kg MAX.= 250 LB/ 110 kg MAX.= 250 LB/ 110 kg MAX. = 110 LBS/ 500 N 1703694B MAX. = 100 LBS/ 450 N 1703868A All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 10 1-877-JLG-LIFT | www.jlg.com JLG CAPACITY SAFETY DECALS DECALS 1703870 1703960 Wheel Load 1932E2 Max Wheel Load 1703996 MAX 8054 kg 17,755 lbs MAX •• 230 kg / 500 lbs MAX 1703996 B • • • 480 kg 1050 lbs 500lb/230kg Max Capacity •• 1703870A 1703960 B 1704201 1704399 Capacity (ANSI) Tire Max ·· ·· ·· ·· 1660 LBS 755 Kg. MAX.= 250 LB/ 110 kg M AX 1050 LBS 1704134C 480 Kg. MAX. = 105 LBS/ 465 N ·· ·· MA X Wheel Load 1932E2 MAX.= 450 LB/ 200 kg ·· MAX.= 700 LB/ 315 kg ·· 1704134 1704399A 1704201A 1704540 1704445 1704401 1704403 ·· ·· · · · · 1704401A 860 Kg. ·· M AX 1900 LBS · · · MA X Wheel Load 3246E2 ·· Wheel Load 2032E2 (CE) Storage Capacity Max Tire Load MAX 3130 kg 6900 lbs 60 LBS 27 KG MAX 1704403A 1704445 1704559 1704752 Max Tire Load 1704827 Max Tire Load 7200lb MAX 2600 lbs 1180 kg 1704559A 1704828 Max Tire Load 6200lb MAX 7200 lbs 3266 kg Max Tire Load 8350lb MAX 3788 kg 8350 lbs MAX 2812 kg 6200 lbs 1704752 B 1704540 A 1704827 A 1704828 A All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 11 JLG CAPACITY DECALS 1705020 Capacity (2250lb-1020kg)(EXT) 1704829 MAX.=2250 LB/ 1020 kg Max Tire Load 7200 lb MAX 3266 kg 7200 lbs MAX.= 500 LB/ 227 kg 1704829 A MAX. = 335 LBS/ 1490 N 1705020C 1705042 1705021 1705059 Max Load (Jacks) Capacity (1500lb-681kg)(EXT) MAX.=1500 LB/680 kg MAX.= 500 LB/ 227 kg MAX. = 300 LBS/ 1335 N 1705021A 1705167 1705178 26250lb Max Tire Load Max Tire Load 25000lb Dual Capacity 500lb (DOM)MTB MAX. 4400 lbs. 1995 kg. MAX 365 kg 800 lbs 1705059 1705042A 1705181 Dual Capacity 1200SJP MAX 25000 lbs 11340 kg MAX 26,250 lbs 11,907 kg + 500 lbs/ 230 kg UNRESTRICTED CAPACITY 100 lb/450 N MAX + = 1000 lbs/ 450 kg 1705181 C 1705178 A 1705167 B 1705639 1705638 Capacity (800lb-363kg) Capacity (5500lb-230kg) MAX CAPACITY 800 lbs/ 363 kg= MAX CAPACITY 500 lbs/ 227 kg + = 250 lbs/113 kg = + + + = 800 lb/363 kg = 500 lbs/227 kg MAX 100 lb/445 N 1705638 A + = 250 lb/113 kg MAX 120 lb/533 N 1705639 A All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 12 1-877-JLG-LIFT | www.jlg.com JLG CAPACITY SAFETY DECALS DECALS 1705640 1705641 Capacity (1000lb-454kg) Capacity (1000lb-454kg) + MAX CAPACITY 1000 lbs/454 kg= Zone A + = 1000 lb/454 kg Zone B MAX CAPACITY + MAX 150 lb/667 N = 250 lb/113 kg 1000 lbs/454 kg= + 1705640 A + = + Tire Load (1365lb/620kg) 1705647 B + = 250 lbs/ 113 kg 26’ 7.9 M MAX 32’ 9.68 M MAX MAX CAPACITY 500 lbs/ 227 kg + + = 250 lbs/113 kg = 500 lbs/227 kg MAX 100 lb/445 N 620 kg 1705880 Capacity (500lb/227kg/800lb/360kg) Zone A Zone B MAX CAPACITY 800 lbs/363 kg= + = 800 lbs/363 kg= + + = 500 lbs/227 kg + = = + + = 250 lbs/ 113 kg 26’ 7.9 M MAX MAX CAPACITY 500 lbs/227 kg= + = 500 lbs/227 kg 800 lbs/363 kg + 20’ 6.1 M MAX + = 250 lbs/ 113 kg + 20’ 6.1 M MAX = 250 lbs/ 113 kg 26’ 7.9 M MAX MAX =120 LB/533 N MAX = 100 LB/445 N 1705941B 1705880B 250 lbs/ 113 kg Zone B MAX CAPACITY MAX CAPACITY 500 lbs/227 kg= + 800 lbs/363 kg MAX = 105 LB/467 N 1705941 Capacity (500lb/227kg/800lb/363kg) Zone A 1705641D 1705699 A MAX =150 LB/667 N + = = MTB 500lb Capacity (1930) MAX 1365 lbs + 700 lbs/317 kg 250 lbs/ 113 kg 1705699 700 lbs/317 kg= + 1000 lbs/454 kg 1705647 MAX CAPACITY MAX =120 LB/533 N MAX = 100 LB/445 N All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 13 JLG CAPACITY DECALS 1706106 1705978 1706107 Capacity MTB T350 230kg Capacity = + Capacity Platform T350 = = 440 lbs/200 kg UNRESTRICTED CAPACITY 230kg MAX + 70kg = 1705978 A = UNRESTRICTED CAPACITY = = + = 500 lbs/227 kg 500 lbs/227 kg 12.5 m/s MAX 400N MAX + + 440 lbs/200 kg UNRESTRICTED CAPACITY 100 lb/450 N MAX 1706107D UNRESTRICTED CAPACITY 1706106C 1706671 1706126 1230ES Wheel Load 1706310 1706311 Tire Load (1835lb/832kg) MAX 3720 kg 8200 lbs MAX 2070 lbs 1706310 A MAX 1835 lbs Tire Load (2070lb/939kg) 832 kg MAX 400 kg 880 lbs 1706311 A Max Tire Load 939 kg 1706126 A 1706671E 1707013 500lb Max Capacity 600SJ 1706942 Max Tire Load ! WARNING TIP-OVER HAZARD MAX 8500 lbs 3860 kg Ground control operation If any load is in the platform, fully retract the boom before lowering. DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER. + 100 lb/450 N MAX 1706942 A = 500 lbs 230 kg UNRESTRICTED CAPACITY 500 lbs 230 kg MAX DOM 1707013 B 1707014 Dual Capacity ! 1707055 WARNING 500lb Capacity TIP-OVER HAZARD Ground control operation If any load is in the platform, fully retract the boom before lowering. DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER. + 500 lbs 230 kg = + 1000 lbs 450 kg MAX UNRESTRICTED CAPACITY 100 lb/450 N MAX DOM + = 1000 lbs 450 kg 500 lbs 230 kg 100 lb/450 N MAX CAN MAX = 500 lbs 230 kg UNRESTRICTED CAPACITY/ CAPACITÉ NON RESTREINTE 500 lbs 230 kg MAX 1707055 C 1707014 B All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 14 1-877-JLG-LIFT | www.jlg.com JLG CAPACITY SAFETY DECALS DECALS 3252694 3252689 Capacity (800lb-365kg) Capacity MAX.= 1250 LB/ 568 kg MAX.= 950 LB/ 432 kg MAX.= 800 LB/ 365 kg MAX.= 300 LB/ 136 kg MAX.= 550 LB/ 250 kg MAX.= 250 LB/ 115 kg MAX. = 120 LBS/ 534 N MAX. = 187 LBS/ 832 N 3252694B 3252689A 3252752 3252751 Capacity (EXT Deck) C/D/L/B/J Capacity (EXT Deck) C/D/L/B/J MAX.= 1250 LB/ 565 kg MAX.= 750 LB/ 340 kg MAX.= 250 LB/ 115 kg MAX.= 750 LB/ 340 kg MAX.= 500 LB/ 225 kg MAX.= 500 LB/ 225 kg MAX. = 225 LBS/ 1000 N MAX. = 150 LBS/ 667 N 3252752A 3252751A 4105262 Boom Angle Indicator 1001121801 4105262D Max Capacity 500lb/227kg + 100 lb/445 N MAX ANSI = 500 lbs 227 kg 500 lbs 227 kg MAX UNRESTRICTED CAPACITY 1001121801 A 1001121803 Max Capacity 500lb/227kg + 100 lb/445 N MAX CAN = 500 lbs 227 kg UNRESTRICTED CAPACITY/ CAPACITÉ NON RESTREINTE 500 lbs 227 kg MAX 1001121803 A All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 15 JLG CAUTION DECALS 1702294 No Hands 1702868 ! CAUTION NO HANDS OR LANYARD PLACING HAND HERE MAY RESULT IN MINOR OR MODERATE INJURY. 1702868 B No Hands 1704000 ! NO HANDS OR LANYARD ! TENIR MAINS ET SANGLES A L ECART. Placing hand here may result in MINOR OR MODERATE INJURY. Placer les mains a cet endroit peut provoquer DES BLESSURES MINEURES OU BENIGNES. 1704000 C No Hands (CAN) All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 16 1-877-JLG-LIFT | www.jlg.com JLG CONTROLSAFETY PANEL DECALS DECALS 1702387 Platform Display 1702565 1702564 500 LB Drive Steer Stop 1000 LB 1702565 B 1702387 H 1702566 1702567 Lift, Swing Function Speed 1702567 B 1702566 B 1702610 Ground Control Display 1702676 Horn 1702676 D 1702610 C 1702784 Legend Drive Select Steer Select Platform Level Chassis Out of Level Main Lift Swing Function Speed Control Platform Rotate Creep Tower Lift Platform Capacity Indicator Tower Telescope Engine Distress Articulating Fly Boom Low Fuel Level AC Generator ON Glow Plug Indicator Enable Indicator Power Emergency Stop Main Telescope Fuel Select Soft Touch Override Soft Touch Indicator Drive Start Auxiliary Power Steer 1702784 F All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 17 JLG CONTROL PANEL DECALS 1703084 Platform Display (CE) 1703078 Legend 230 KG Platform Up Down Chassis Out of Level Power Emergency Stop Engine Distress Deck Extension Steer Drive Start Glow Plug/ Choke Axle Lock 1701510 450 KG High Speed Drive Low Speed Drive 1703078 1703084 E 1703465 MTB 1703678 1703689 Horn, Drive Speed, Level Horn, Drive Speed, Level 1703678-B 1703689 B 1703695 Legend ! Platform Up Down Deck Extension Chassis Out of Level Power Emergency Stop High Speed Drive Steer Drive Low Speed Drive 1703695C 1703465 G 1703706 Ground Control 1703808 Legend, MTB Start Auxiliary Power 1704192 Power Emergency Stop Battery Charging Condition Engine Coolant Temperature Engine Intake Air Filter Hydraulic Oil Filter Glow Plug Indicator Platform Control Off Ground Control Engine Oil Pressure Engine Oil Temperature Transmission Oil Filter Low Fuel Level Engine Malfunction Indicator Stop 1703808 C 1703706B All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 18 1-877-JLG-LIFT | www.jlg.com JLG CONTROLSAFETY PANEL DECALS DECALS 1704239 1704252 Platform Display Legend (MTB) ! -PowerEmergency Stop 1704240 Horn and Positrack Platform Control Off Ground - + Articulating Fly Boom 1704239 H Jib Swing Main Tele Main Lift 1704253 Legend (Platform) ! System Fault Traction Control Jib Swing Main Lift Steer Select Platform Level Chassis Out of Level Swing Function Speed Control Platform Rotate Creep Tower Lift Platform Capacity Indicator Engine Distress Low Fuel Level Tower Telescope Jib Lift Main Telescope AC Generator ON Glow Plug Indicator Enable Indicator Fuel Select Soft Touch Override Soft Touch Indicator Power Emergency Stop Drive Generator Enable Rotate Steer 1704253 D Level Drive 1704465 Steer MTB 400S Swing 1704460 Drive & Steer Tower Lift Engine Distress Generator Start 1704252-C 1704465 C All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 19 JLG CONTROL PANEL DECALS 1704480 Legend 1704484 Platform Display (DOM) POWER EMERGENCY STOP 500 LB AUXILIARY POWER ENGINE DISTRESS F 1000 LB E START 1704484 F ENGINE SPEED WHEEL DRIVE HIGH 1704485 SPEED LOW Platform Display HORN F LIGHTS FUNCTION ENABLE E ! 1704485 F TILT STEER REAR STEER 1704487 Platform Display (DOM) (750lbs) LIFT 750 LB PLATFORM EXTEND/ RETRACT F 1000 LB PLATFORM EXTENSION SELECT E 1704487 F HYDRAULIC LEVELING JACKS 1704502 Symbol Legend for Crawler Drive Select Drive Disable Platform Level Chassis Out of Level Main Lift Swing Function Speed Control Platform Rotate 500 LB Creep Tower Lift 1000 LB Platform Capacity Indicator Tower Telescope Engine Distress Articulating Fly Boom Low Fuel Level Main Telescope AC Generator ON Fuel Select Glow Plug Indicator Enable Indicator Soft Touch Override Soft Touch Indicator Power Emergency Stop Counter Rotate Start Auxiliary Power Drive Steer 1704502 C All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 20 1-877-JLG-LIFT | www.jlg.com JLG CONTROLSAFETY SAFETY PANEL DECALS DECALS 1704707 1704952 Platform Display (DOM) Platform Display 230 500KG LB F 500 LB MAX 230 KG MAX 1000 450 KG LB 1000 LB MAX 450 KG MAX ! E 1704952 E 1704707 D 1704993 Light Panel 750lb (DOM) 1704997 Stop F 500 LB MAX 230 KG MAX 750 LB MAX 340 KG MAX ! 1704997 B E 1704993 D 1705015 Legend Drive Select Steer Select Platform Level Chassis Out of Level Creep Main Lift Swing Function Speed Control Platform Rotate Platform Out of Level 1705170 Headlight Platform Capacity Indicator ! Cable Break Engine Distress Low Fuel Level Exceeding Operating Radius Main Telescope AC Generator ON Fuel Select Glow Plug Indicator Enable Indicator Soft Touch Override Soft Touch Indicator Start Power Emergency Stop Auxiliary Power Drive Steer 1705015 B 1705173 1705171 Platform Display (DOM) Jib Stow F 500 lb MAX 230 kg MAX ! 1705170 A 1705171 A ! 1000 lb MAX 450 kg MAX ! E 1705173 C All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 21 JLG CONTROL PANEL DECALS 1705175 Function Speed 1705174 Stop 1705175 B 500 lb 230 kg MAX 1000 lb 450 kg MAX 1705174 C 1705190 Legend (ENG) 1705212 Light Display (CE) POWER EMERGENCY STOP ! SYSTEM DISTRESS TILT ! AUXILIARY POWER 1705212 D START HIGH SPEED LOW HORN AC GENERATOR ON STEER 1705309 Platform Legend 1350SJP Drive Select Main Lift Steer Select Platform Level Swing Function Speed Control Chassis Out of Level Platform Rotate Platform Capacity Indicator Creep Platform Out of Level ! Engine Distress Cable Break Axle Set Low Fuel Level Main Telescope AC Generator ON Axle Extend Retract Glow Plug Indicator Soft Touch Override Enable Indicator Jib Swing Start Power Emergency Stop Auxiliary Power Drive ! Steer Drive Orientation System Jib Lift Boom Control System Jib Stow Override 1705309 C DRIVE LIFT 1705686 LEVELING JACK ENABLE LEVELING JACKS SET LEVELING JACKS RETRACTED PLATFORM EXTEND/ RETRACT PLATFORM EXTENSION SELECT 1705190A Legend (1930ES) 1705351 Drive/Steer Instruction (DOM) ! Yellow light indicates the machine may Drive/Steer in the opposite direction from movement of controls. ! 1705429 POWER EMERGENCY STOP Drive/Steer Instruction (ENG/FR) ! ! ! ! Match black and white direction arrows on both platform control panel and the chassis to determine the direction the machine will travel. Push and release Drive Orientation Override switch. Within 3 seconds slowly move the Drive/Steer control toward the arrow matching the intended direction of machine travel. SYSTEM FAULT TILT STEER DRIVE 1705351 B LIFT 1705686 A All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 22 1-877-JLG-LIFT | www.jlg.com JLG CONTROLSAFETY PANEL DECALS DECALS 1705745 Function Speed 1705744 Horn 1705745 C 1705744 A 1705753 MTB CE (800A) 1705911 Nameplate/Load 1705753 B ! ! 1705911B 1705912 Platform Box 1705912B All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 23 JLG CONTROL PANEL DECALS 1705913 1705914 Platform Display Platform Box ! 1705913B 1705914B 1705947 1705948 Platform Display Platform Box ! 1705947B 1705948B 1705950 Platform Box 1705973 Platform Display 1250AJ ! - + ! 500 lb MAX 230 kg MAX ! + ! 1000 lb MAX 450 kg MAX F ! ½ ! E 1705973 D 1705950E 1706108 Legend Platform T350 ! System Distress Leveling Jacks Set ! Chassis Out of Level Function Enable 1706108B All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 24 1-877-JLG-LIFT | www.jlg.com JLG CONTROLSAFETY PANEL DECALS DECALS 1706708 Legend (Platform) Main Lift Chassis Out of Level Platform Level Steer Select Drive Select Function Speed Control Swing Platform Rotate F Platform Capacity Indicator Creep Engine Distress Fuel Level AC Generator ON Glow Plug Indicator Enable Indicator Power Emergency Stop Main Telescope Fuel Select Soft Touch Override Soft Touch Indicator Drive E Tower Telescope Tower Lift ½ Articulating Fly Boom Start Auxiliary Power Steer 1706708 B 1706712 Display Panel (MTB) 1706709 Legend (MTB) Start Power Emergency Stop Battery Charging Condition Engine Coolant Temperature Engine Intake Air Filter Hydraulic Oil Filter Glow Plug Indicator Platform Control Off Ground Control Engine Oil Pressure Engine Oil Temperature Transmission Oil Filter Low Fuel Level Engine Malfunction Indicator Auxiliary Power 1706709 A 1706712 D 1706751 Legend Main Lift Swing Axle Set 1706751A Steer Select Drive Select Platform Level Function Speed Control Tilt Warning Platform Rotate ! Platform Capacity Indicator System Distress Level System Fault ! Cable Service Creep Boom Control Select Fuel Level Main Telescope AC Generator ON Axle Extend Retract Tower Lift Glow Plug Indicator to ( Wait start ) Drive Orientation System Enable Indicator Jib Swing ! Boom Control System Warning Drive Steer Jib Stow Override Power Emergency Stop Jib Lift Start Auxiliary Power All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 25 JLG CONTROL PANEL DECALS 1706914 1706926 MTB User Flash Codes FLASH CODES 1 Flash Sequence error: release all switches. Wait 5 seconds, activate enable switch then function switch. ! Lift up and extend boom prevented: telescope in, lower boom, then reset outriggers. ! 2 Outrigger movement Flashes prevented: retract and lower boom, then activate outriggers. Push Emergency Stop to shut machine off. Wait 5 seconds and 4 Flashes restart machine. ! ! Electric Powered: Batteries may need recharged. Engine Powered: 5 Flashes Shut off and wait 5 seconds. Restart engine. Check fuel and oil level if conditions persist. 1706926A 1706914 A 1706931 Legend Drive Select Steer Select Platform Level Chassis Out of Level Main Lift Swing Function Speed Control Platform Rotate Creep Tower Lift Platform Capacity Indicator Tower Telescope Engine Distress Articulating Fly Boom Low Fuel Level AC Generator ON Glow Plug Indicator Enable Indicator Power Emergency Stop Main Telescope Fuel Select Soft Touch Override Soft Touch Indicator Drive Start Auxiliary Power Steer 1706931 B 1706941 Legend MTB Start Auxiliary Power Power Emergency Stop Battery Charging Condition Engine Coolant Temperature Glow Plug Indicator Platform Control Off Ground Control Engine Oil Pressure Engine Oil Temperature Transmission Oil Filter Function Enable Engine Malfunction Indicator Low Fuel Level 1706941 A All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 26 1-877-JLG-LIFT | www.jlg.com JLG CONTROLSAFETY PANEL DECALS DECALS 1706946 1706950 MTB Legend MTB -PowerEmergency Stop Platform Control Off Ground Articulating Fly Boom Jib Swing Main Tele Main Lift Rotate Level Drive Steer 1706946 A Swing Tower Lift Engine Distress Generator Start Function Enable 1706950 A 1707110 Legend Platform Drive Select Main Lift Steer Select Platform Level Swing Function Speed Control Chassis Out of Level Platform Rotate Creep Tower Lift Platform Capacity Indicator Tower Telescope Engine Distress Articulating Fly Boom Low Fuel Level Main Telescope AC Generator ON Fuel Select Glow Plug Indicator Soft Touch Override Enable Indicator Power Emergency Stop Soft Touch Indicator Drive Start Auxiliary Power BOOM MALFUNCTION Steer 1707110 A All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 27 JLG CONTROL PANEL DECALS 1707113 1707111 Platform Display (EURO) Platform Display (DOM) 450 KG 500 LB MAX 230 KG MAX 1000 LB MAX 450 KG MAX 1707111 D 3252542 1707113 D 3252602 Controller Lid Box Lid w/ Tilt & BD 3252542 ! 3252620 Controller Box Lid ! 3252602 E 4107462 Side Console 4107462C 3252620 B All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 28 1-877-JLG-LIFT | www.jlg.com JLG CONTROLSAFETY PANEL DECALS DECALS 1001091272 Icon (DOM) 4110188 ! Overlay LH - + RUN-OVER HAZARD could cause death or serious injury. 1001102601 1706304A Operator must be trained and must read and understand all capacity charts, operator and safety manuals. Fasten seat belt. 1706303A 1706767A MTB 600S 4110188D 1001107527 Stop 1001107527 A 1001102601 B 1001107849 1001107850 Platform Display Platform Display 500 LB MAX 230 KG MAX ! 1000 LB MAX 450 KG MAX 750 LB MAX 340 KG MAX F ½ ! ! E 1001107849 D 1000 LB MAX 450 KG MAX F ½ ! E 1001107850 D All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 29 JLG CONTROL PANEL DECALS 1001107853 1001107851 Platform Display Platform Display F ½ ! ! ! ! E ! 1001107851 D 1001107926 1001107853 D 1001107927 Platform Display Platform Display ! ! 230 230KG KG ! ! 1000 LB MAX 450 KG MAX 1001107926 C 1001107952 ! 500 LB MAX 230 KG MAX ! 1001107927 D 1001107953 Platform Display (CE) Platform Display (860SJ) 500 lb MAX 230 kg MAX F ! ! ½ ! ! 750 lb MAX 340 kg MAX E 1001107952 C F ! ½ ! E 1001107953 C 1001107954 Platform Display 800S 500 lb MAX 230 kg MAX ! 1000 lb MAX 450 kg MAX F ! ½ ! E 1001107954 C All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 30 1-877-JLG-LIFT | www.jlg.com JLG CONTROLSAFETY PANEL DECALS DECALS 1001108492 Legend (Platform) 400S Drive Select Main Lift Steer Select Swing Platform Level Function Speed Control Chassis Out of Level Platform Rotate Creep Tower Lift Platform Capacity Indicator ! Tower Telescope System Distress F Fuel Level ½ E Articulating Fly Boom Main Telescope AC Generator ON Fuel Select Glow Plug Indicator Soft Touch Override Enable Indicator Power Emergency Stop Soft Touch Indicator Drive Start Auxiliary Power ! Steer Drive Orientation 1001108492 A 1001108493 Legend (Platform) 450A/450AJ/510AJ/600A/600S Drive Select Steer Select Platform Level Chassis Out of Level Main Lift Swing Function Speed Control Platform Rotate Creep Tower Lift Platform Capacity Indicator ! Tower Telescope System Distress Articulating Fly Boom Low Fuel Level Main Telescope AC Generator ON Fuel Select Glow Plug Indicator Soft Touch Override Enable Indicator Power Emergency Stop Soft Touch Indicator Drive Start Auxiliary Power Steer ! Drive Orientation 1001108493 A 1001108494 Legend (Platform) 600SC Drive Select Drive Disable Platform Level Chassis Out of Level Main Lift Swing Function Speed Control Platform Rotate Creep Tower Lift Platform Capacity Indicator ! Tower Telescope System Distress Articulating Fly Boom Low Fuel Level Main Telescope AC Generator ON Fuel Select Glow Plug Indicator Soft Touch Override Enable Indicator Power Emergency Stop Soft Touch Indicator Counter Rotate Start Auxiliary Power Drive Steer ! Drive Orientation 1001108494 A 1001108495 Legend (Platform) 740AJ/800A/800AJ Drive Select Main Lift Steer Select Platform Level Swing Function Speed Control Chassis Out of Level Platform Rotate Creep Tower Lift Platform Capacity Indicator Tower Telescope ! System Distress Articulating Fly Boom Low Fuel Level Main Telescope AC Generator ON Fuel Select Glow Plug Indicator Soft Touch Override Enable Indicator Soft Touch Indicator Power Emergency Stop Drive Start Auxiliary Power Steer BOOM MALFUNCTION ! Drive Orientation 1001108495 A All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 31 JLG CONTROL PANEL DECALS 1001108496 Legend (Platform) 800S Drive Select Steer Select Platform Level Chassis Out of Level Creep Main Lift Swing Function Speed Control Platform Rotate Platform Out of Level Platform Capacity Indicator ! ! System Distress Exceeding Operating Radius Cable Break 1001110226 Low Fuel Level Main Telescope AC Generator ON Glow Plug Indicator Soft Touch Override Fuel Select Enable Indicator Power Emergency Stop Soft Touch Indicator Drive Start Auxiliary Power Steer ! Drive Orientation 1001108496 A 1001121657 Light Display Platform Display ! ! 230 230KG KG ! - + ! 500 LB MAX 227 KG MAX 1000 LB MAX 454 KG MAX ! 1001121657 B 1001110226B 1001122384 Light Panel (Platform) 1001131168 500 lb MAX 227 kg MAX ! ! 1000 lb MAX 454 kg MAX Stop & Auxillary Power F ! ½ ! 1001131168 B E 1001122384 B 1001132175 Stop & Generator 1001132175 A All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 32 1-877-JLG-LIFT | www.jlg.com JLG COMSETIC SAFETY DECALS DECALS 1703681 JLG 1702861 JLG Lift 8” R 1704789 1705460 E450AJ Sky Power E450AJ R 1704789-A 1705754 1705781 JLG 3.5” JLG 2.75” 1706667 1705864 1230ES 1230ES JLG 12” R www.jlg.com All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 33 JLG COSMETIC DECALS 3252598 3252598B Model Tag 1932E2 All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 34 1-877-JLG-LIFT | www.jlg.com JLG DANGER SAFETY DECALS DECALS 1703823 1703805 Electrocution Hazard Electrocution ! DANGER DANGER ELECTROCUTION HAZARD • This machine is not insulated. • Maintain a clearance of at least 10FT.(3M) between any part of machine or load and any electrical lines or apparatus. • This machine is not insulated. • Maintain a clearance of at least 10FT.(3M) between any part of machine or load and any electrical lines or apparatus. Failure to follow instructions will result in death or serious injury. Failure to follow instructions will result in death or serious injury. 1703805 D 1705681 1703936 Electrocution Danger (CAN) ! DANGER ELECTROCUTION HAZARD ! ELECTROCUTION HAZARD RISQUE D'ÉLECTROCUTION Cette machine n'est pas isolée. Maintain a clearance of at least 10FT.(3M) between any part of machine or load and any electrical lines or apparatus. Maintenir une distance d'au moins 3 m (10 ft.) entre la machine ou sa charge et tout appareil ou ligne électrique. Failure to follow instructions will result in death or serious injury. DANGER DANGER This machine is not insulated. CAN 1703823 B • This machine is not insulated. • Maintain a clearance of at least 10FT.(3M) between any part of machine or load and any electrical lines or apparatus. Failure to follow instructions will result in death or serious injury. Le non-respect de ces instructions provoquera des blessures graves, voire mortelles. 1703936 C 1705681 C 1706128 1705695 Electrocution Electrocution 1930ES ! DANGER DANGER ELECTROCUTION HAZARD insulated. • This machine is not insulated. • Maintain a clearance of at least 10FT.(3M) between any part of machine or load and any electrical lines or apparatus. • Maintain a clearance of at least 10 ft. between any part of machine or load and any electrical line or apparatus. Failure to follow instructions will result in death or serious injury. 1705695 B ELECTROCUTION HAZARD • This machine is not Failure to follow instructions will result in death or serious injury. 1706128E 1706832 1230ES Electrocution DANGER ELECTROCUTION HAZARD • This machine is not insulated. • Maintain a clearance of at least 10FT.(3M) between any part of machine or load and any electrical lines or apparatus. Failure to follow instructions will result in death or serious injury. 1706832 B All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 35 JLG ILLUSTRATION/PICTORAL DECALS 1701499 1701500 No Tie Down/Lift 1701504 Lift Here Hydraulic Oil 1701502 1701500 Hydraulic Oil Level (High) 1701499B 1701505 1701518 Diesel Crushing 1701509 1701529 Manual Arrow 1701529 A 1701509 B 1701518 A 1701640 1701644 Manual Battery Charger 1702155 Battery Disconnect 1701542 Gasoline _ + 1702155 1701644 1701640 1703162 1703072 Fan Blade 1703687 1703697 Arrow Safety Prop 1703687 B 1703697A No Forklift 1703072 1703162 B All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 36 1-877-JLG-LIFT | www.jlg.com JLG ILLUSTRATION/PICTORAL SAFETY DECALS DECALS 1703814 1703817 Tie Down Fork Lift 1703819 Direction Arrow 1703819B 1703817A 1703814A 1704260 1704125 EMS (Euro Requirement) Air Lead 1704016 1703822 300 psi 20.7 bar MAX Forklift Location Manual Descent Instructions 1704016 C 1703822A 1704260-B 1704125 A 1704726 1704277 1704277 A 1705096 Lift Diagram (1200/1350) 1704726 A Lock Latch Lanyard Attachment TO HU B RQ UE RQ UE TO R HU B 10’9”/3.28 m 7’10”/2.39 m 18’7”/5.66 m HU B 27’9"/8.46 m (1350SJP / 1100SB) TO RQ UE RQ UE TO Manual Descent 10’0”/3.05 m R 1705016 HU B 11’2”/3.40 m 23’9”/7.24 m (1200SJP) 38’11”/11.86 m (1350SJP / 1100SB) 34’11”/10.64m (1200SJP) 1705096 E 1705016 A All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 37 JLG ILLUSTRATION/PICTORAL DECALS 1705692 Control Box Location 1706100 Gooseneck 10 1705828 Footswitch (CE) 1705693 1705693 A Safety Prop 1705828 B 1705692 A 1706170 Gooseneck 6 1706350 1706670 Cover 1706263 1230ES Manual Descent Brake Set 1706263B P P 1706670 A 1706350_B 3251102 3252768 Generator 1706741 Lift Diagram 450A (DOM) Boom Control Select 510AJ 64.3 in 450AJ 450A SERIES II SERIES II 63.1 in A (1634 mm) (1603 mm) 1706741A B 47.1 in (1196 mm) 48.3 in (1227 mm) 63.2 in (1605 mm) 48.2 in (1223 mm) 1702300 R A B 4100181 A B 3252768 C 4108302 Hydrualic Oil Lift Diagram 800S (DOM) 1702300 CL 3252781 MODELS 1701500 1701500 3251102 B 1702300 CG Hydraulic Oil Level C 66” (168cm) 76” (189cm) 57” (145cm) 860SJ 62” (157cm) 80” (203cm) 53” (135cm) 680S 70” (178cm) 72” (183cm) 61” (155cm) 1701500 800S A 1701500 1702300 1702300 CL C B 3252781 C 4100181B 4108302 All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 38 1-877-JLG-LIFT | www.jlg.com JLG ILLUSTRATION/PICTORAL SAFETY DECALS DECALS 4110226 Lift Point/Tie Down All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 39 JLG IMPORTANT DECALS 1702265 1702153 Manual Descent Inspection (DOM) ! IMPORTANT 1703696 Gradeability IF THE LOWER BOOM ASSEMBLY DOES NOT FULLY LOWER: first delivery ANSI requires an annual inspection be performed by qualified personnel in accordance with manufacturer’s specifications. 5 years 8. Repeat steps 4 through 7 if necessary. Use JLG approved manuals, parts and procedures. Contact JLG regarding structural repairs. 7 years 2 years Stamp frame with MONTH/DAY/YEAR next to arrow after each inspection. Retain records in accordance with ANSI. 8 years Notify JLG immediately of any changes of ownership. Replace if defaced DOM MAX. 4WD GRADEABILITY MAX. SIDE SLOPE 5° 35% 1703696A 1702265 C 1704248 Battery Charger Instructions - IMPORTANT + 100% 9 years - 4 years WHEN DRIVING WITH THE PLATFORM COMPLETELY LOWERED DO NOT EXCEED 6 years 1 year 3 years IMPORTANT 1. Pull out red EMS knob located on ground control. 2. Turn key switch to ground control position. 3. Start the engine (if applicable). 4. Pull and hold out the red re-level knob located next to the main control valve. 5. Raise the lower boom 6 feet. 6. Release the red re-level knob. 7. Lower the boom fully, and continue to hold down switch for an additional 5 seconds. Battery charging instructions. For maximum battery life: Avoid completely discharging the batteries. Fully charge the batteries each day the machine is used. Charge the batteries at available times between full charges. Ensure that the battery plates are immersed in battery fluid before charging. However, to avoid overflow, Do Not fill the fluid level until after charging. + 10 years 1702153 D 1. To charge batteries, connect charger to proper voltage source with 15 AMP minimum capacity. 2. The charge cycle is complete when the 100% LED is lit. Any other reading indicates that the charge cycle is not complete. If the abnormal LED is lit, consult the Operators Manual. 3. The charger will shut off automatically when the batteries are fully charged. 4. Depleted batteries will take approx.17 hours to charge. 1704248 B 1705365 1704446 Load Management (BCS) 1704521 Charging Instructions 1704903 Gradeability IMPORTANT Battery charging instructions. For maximum battery life: Avoid completely discharging the batteries. Fully charge the batteries each day the machine is used. Charge the batteries at available times between full charges. Ensure that the battery plates are immersed in battery fluid before charging. However, to avoid overflow, Do Not fill the fluid level until after charging. 1. To charge batteries, connect charger to proper voltage source with 15 AMP minimum capacity. 2. The charge cycle is complete when 100% LED is lit. Any other reading indicates that the charge cycle is not complete. If the abnormal LED is lit, consult the Operators Manual 3. Charger will shut off automatically when batteries are fully charged. IMPORTANT PROCEDURE FOR DAILY CHECK OF BOOM CONTROL SYSTEM 1. Extend all axles fully. WHEN DRIVING WITH THE PLATFORM COMPLETELY LOWERED DO NOT EXCEED 25% 45% 1704521B 2. With the boom fully retracted, raise boom off the boom rest to horizontal. 3. Position jib horizontal, jib straight, and platform level. 4. Extend boom until it stops. MAX. GRADEABILITY 35% MAX. SIDE SLOPE 5° 5. Boom must stop on colored stripe matching the capacity indicator. If the boom does not stop on the correct stripe, system must be repaired by JLG authorized service personnel before machine can be used. 1704903A 6. Push and hold the gray test switch on the ground control panel. The lighting of a green boom control system light indicates the system is functioning properly. No indicator light or the lighting of a red boom control system light indicates the system ! must be repaired by JLG authorized service personnel before machine can be used. 1705365 B 3252672 Lift Diagram 400 (DOM) 1001092071 IMPORTANT LIFTING INSTRUCTIONS 1. See the Operators and Safety Manual for approximate gross weight of machine as originally manufactured. 2. Place boom in the stowed position with turntable locked 3. Remove all loose items from machine. 4. Properly adjust rigging to prevent damage to machine and so machine remains level. LIFT HERE TIE DOWN INSTRUCTIONS 1. Place boom in the stowed position with turntable locked. 2. Remove all loose items from machine. 3. Secure the chassis and the platform using straps or chains of adequate strength. Refer to the Operators and Safety Manual for more information. CENTER OF GRAVITY 4. Depleted batteries will take approx. 17 hours to charge. DOM AT THE BEGINNING OF EACH DAY’S USE, PERFORM CHECK WITH NO LOAD (PERSONS OR MATERIAL) IN PLATFORM FROM GROUND CONTROL STATION. IMPORTANT FOR DRIVING WITH THE PLATFORM COMPLETELY LOWERED DO NOT EXCEED MAX. 2WD GRADEABILITY MAX. 4WD GRADEABILITY MAX. SIDE SLOPE 5° IMPORTANT Gradeability 1704446-B TIE DOWN HERE No Pipe Racks Allowed IMPORTANT No pipe racks/ panel carriers allowed on this machine. 1001092071 B CL ROTATION TIE DOWN AND LIFT HERE TIE DOWN HERE 3252672 B All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 40 1-877-JLG-LIFT | www.jlg.com JLG INSTRUCTION SAFETY DECALS DECALS 1703398 Towing/Winch 1702901 BRAKE RELEASE INSTRUCTIONS 1702908 Manual Descent WINCHING OR TOWING Manual Descent ! MANUAL DESCENT INSTRUCTIONS FOR THE ARTICULATING JIB TURN VALVE KNOB COUNTERCLOCKWISE UNTIL TIGHT. TO LOWER THE ARTICULATING JIB........ MANUAL DESCENT INSTRUCTIONS INSIDE 1. TURN THE KNOB LOCATED ON THE JIB CYLINDER COUNTERCLOCKWISE. 2. WHEN MANUAL DESCENT FUNCTION IS COMPLETED, TURN KNOB ON JIB CYLINDER CLOCKWISE. TURN BRAKE CAMS TO HORIZONTAL USING 3/4" WRENCH 3. WINCH OR TOW A 1702908 1702901 2. RELEASE PARKING BRAKE 1703213 ! 1. DISENGAGE DRIVE MOTORS 4. RESET PARKING BRAKE 5. ENGAGE DRIVE MOTORS TURN BRAKE CAMS TO VERTICAL USING 3/4" WRENCH TURN VALVE KNOB CLOCKWISE UNTIL TIGHT. 1703398 1703698 Towing/Wenching-Tow Speed BRAKE RELEASE INSTRUCTIONS 1704017 WINCHING OR TOWING TURN VALVE KNOB COUNTERCLOCKWISE UNTIL TIGHT. 3. WINCH OR TOW 4. RESET PARKING BRAKE TURN BRAKE CAMS TO VER TICAL USING 3/4" WRENCH 2. RELEASE PARKING BRAKE Brake Release Instructions BRAKE RELEASE INSTRUCTIONS – WINCHING OR TOWING TURN BRAKE CAMS TO HORIZONTAL USING 3/4" WRENCH 1. DISENGAGE DRIVE MOTORS DISENGAGE BRAKE BEFORE WINCHING OR TOWINGTOW OR WINCH SLOWLY 2 M.P.H. / 3.2 K.P.H. MAX. 2. RELEASE PARKING BRAKE 5. ENGAGE DRIVE MOTORS TURN BRAKE CAMS TO HORIZONTAL USING 3/4" WRENCH. 2 Set Parking Brake STEP 3 Set Jack STEP 4 Uncouple from tow vehicle and disconnect lights and chains. STEP 5 Unlatch Boom STEP 6 Turn on engine fuel (if equipped) STEP 7 STEP 11 Stow Jack STEP Raise boom from boom rest. 12 Select Ground Control STEP 8 13 Pull emergency stop to turn on. Swing boom away from tongue. STEP 9 STEP Fully lower and retract boom, lower outriggers until all outrigger lights are on and machine beeps 3 times indicating machine is properly leveled. 10 Getting Started User Flash Codes STEP 1 Read the Operation and Safety Manual. Perform Pre-Start Inspection. ! 1 Flash Extend boom out and lower boom to ground. STEP Turn Emergency Stop clockwise to release. STEP Select function using rotary switch. STEP 15 4 Select Platform Control Release joystick controller, allow to return to center, wait 5 seconds, and follow steps 4 & 5. STEP 3 14 ! 2 Flashes ! 4 Flashes Function speeds may be slow. Lift up and telescope out may be prevented. Fully retract boom, lower boom, and reset outriggers. Push Emergency Stop to shut machine off. Wait 5 seconds and follow step 2. Depress Trigger Switch STEP 16 Enter Platform Quick Reference 2 STEP STEP Hold enable switch then activate machine function. GETTING STARTED STEP 5. ENGAGE DRIVE MOTORS TURN VALVE KNOB CLOCKWISE UNTIL TIGHT. Quick Reference GETTING STARTED Read the Operation and Safety Manual. Perform Pre-Start Inspection. DISENGAGE BRAKE BEFORE WINCHING OR TOWINGTOW OR WINCH SLOWLY 2 M.P.H. / 3.2 K.P.H. MAX. 1706897 Getting Started 1 4. RESET PARKING BRAKE TURN BRAKE CAMS TO VERTICAL USING 3/4" WRENCH. TURN VALVE KNOB CLOCKWISE UNTIL TIGHT. 1703698C 1706890 STEP 3. WINCH OR TOW TURN VALVE KNOB COUNTERCLOCKWISE UNTIL TIGHT. 1704017B 1. DISENGAGE DRIVE MOTORS STEP 5 1706890A Move Joystick to operate function ! 5 Flashes Battery may need recharged. Push Emergency Stop to shut off, wait 5 seconds, follow step 2, and check battery level. 1706897A All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 41 JLG INSTRUCTION DECALS 1706924 1001094359 Finishing Troubleshooting ES FINISHING STEP STEP 1 6 Read the Operation and Safety Manual. STEP STEP 2 7 Set Jack Turn off Control Select STEP 3 STEP 8 Fully retract and swing boom to align with tongue. STEP STEP 5 Lower boom to boom rest. Fully raise outriggers. Push emergency stop to turn off. STEP 11 2 ! Stow Jack STEP 12 1001094359A Hook up lights and safety chains (if equipped). STEP 13 Release Brake 9 FINISHING 4 Latch Boom 1 STEP Turn off engine fuel (if equipped) STEP 10 Couple to tow vehicle. 1706924A All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 42 1-877-JLG-LIFT | www.jlg.com JLG MISCELLANEOUS SAFETY DECALS DECALS 1700584 1700818 Patent (BLK) LP Gas (ENG) L.P. GAS LIQUID WITHDRAW SYSTEM JLG INDUSTRIES, INC. 1700584 L 1 JLG DRIVE McCONNELLSBURG, PA 17233 COVERED UNDER ONE OR MORE OF THE FOLLOWING PATENTS UNITED STATES PATENTS 4775029 5992562 6098823 6488161 6571913 4754840 5160055 5957494 6330933 6561546 5740887 6065565 6390312 6501198 CANADA PATENTS 1291047 2076949 0785168 1702276 1702612 Attach Safety Belt Here Lanyard 7/8"(D-Ring) ATTACH LANYARD HERE 1702612 1700818 B OTHER PATENTS PENDING 1704412 Oil Chart 1704412J 1703464 AC Power 1703175 Lanyard (GM,D-Rings) CERTIFIED LANYARD ANCHORAGE POINT AS PER GM K-1 SPECIFICATION 120V - 60Hz AC POWER TO PLATFORM 1703464B 1703175 1703815 Mobil 424 P/N 2300014 Mobil DTE 10 EXCEL 15 Attach Lanyard Here 3/4" P/N 2300028 Mobil DTE 10 EXCEL 32 P/N 2300016 ATTACH LANYARD HERE Mobil EAL 224H P/N 2300027 1703815A Mobil EAL Envirosyn H46 P/N 2300029 Union Carbide Ucon Hydrolube HP-5046D P/N 2300021 Fuchs Plantolube Polar 15S P/N 2300030 EXXON UNIVIS HVI 26 P/N 2300039 Mobil EAL Envirosyn H32 P/N 2300042 Quintolubric 888-46 P/N 2300019 1705132 Control ADE 1705303 Ad ADE 1705374 CSA L O CONTR R by ctronics esign Ele vanced D 1705375 240V 60HZ This machine meets or exceeds applicable requirements of CSA B354.2-01 as originally manufactured for intended purposes. 240V 3 Phase 60HZ 240V - 60HZ 240V - 3 PHASE - 60HZ 1705375 A 1705374 A 1705303A R 3251813 Built in the USA Battery Charging - + - + 100% IMPORTANT 3251243 1705850 Platform Color (Pro-Fit) S TM DECAL SIZE: 44” X 4” 1705834 www.jlg.com 120V-60HZ 120V - 60HZ 3251243 Built With Pride In The USA 3251813C All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 43 JLG MISCELLANEOUS DECALS 3252761 120V 120V AC 3252761A All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 44 1-877-JLG-LIFT | www.jlg.com JLG WARNING SAFETY DECALS DECALS 1701214 Outrigger (DOM/CSA) ! WARNING 1702249 CRUSHING HAZARD Gate WARNING ! Keep away from outriggers/ stabilizers. FALLING HAZARD 1702249B CLOSE AND LOCK GATE BEFORE OPERATING FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS INJURY Failure to follow these instructions could result in death or serious injury. 1701214B 1702961 1702962 Prop 65/Gas ! 1703181 Prop 65/DSL 500lb Capacity CALIFORNIA Proposition 65 Warning WARNING: ! The engine exhaust from this product Diesel engine exhaust and some of its contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. constituents are known to the State of California to cause cancer, birth defects, or other reproductive harm. 500 LBS UNRESTRICTED CAPACITY WARNING ! TIP OVER HAZARD Do not exceed the platform capacity indicated on the capacity indicator located on the platform control console. On units with inoperative or defaced capacity indicators, do not exceed 500 pounds maximum platform capacity. Tip-over could result in SERIOUS INJURY OR DEATH. 1703181 B 1702962 1702961 1703942 Crushing (CAN) 1703804 1703813 Crushing ! WARNING CRUSHING HAZARD EXPLOSION/FIRE HAZARD Do not stand under a raised platform or boom, or between a rotating platform and the boom. Charge batteries in well ventilated area, free of flames, smoking, or sparks. Keep all body parts away from any moving components. Failure to follow these instructions could result in death or serious injury. ! Battery Ventilation WARNING Failure to follow warning could cause death or serious injury. 1703813A 1703804 B WARNING ! MISE EN GARDE CRUSHING HAZARD RISQUE D'ÉCRASEMENT Do not stand under a raised platform or boom, or between a rotating platform and the boom. Ne pas se poster sous la plate-forme ou la flèche surélevée, ni entre la plate-forme pivotante et la flèche. Keep all body parts away from any moving components. Se tenir à l'écart des pièces en mouvement.. Failure to follow these instructions could result in death or serious injury. Le non respect de ces consignes peut entraîner la mort ou causer des blessuresgraves. CAN 1703953 1703948 Crushing Crushing (CAN) ! WARNING CRUSHING HAZARD ! MISE EN GARDE RISQUE D'ÉCRASEMENT Do not stand under a raised platform or boom, or between a rotating platform and the boom. Ne pas se poster sous la plate-forme ou la flèche surélevée, ni entre la plate-forme pivotante et la flèche. Keep all body parts away from any moving components. Se tenir à l'écart des pièces en mouvement.. Failure to follow these instructions could result in death or serious injury. CAN 1703942 A Le non respect de ces consignes peut entraîner la mort ou causer des blessuresgraves. 1703948-B ! WARNING CRUSHING HAZARD Do not stand under a raised platform or boom, or between a rotating platform and the boom. Keep all body parts away from any moving components. Failure to follow these instructions could result in death or serious injury. 1703953 A All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 45 JLG WARNING DECALS 1703984 1704096 Foot Switch (CAN) ! Dual Capacity (DOM) WARNING Death or serious injury could result if foot switch is disabled, blocked or inoperative. + 100 lb/450 N MAX Un interrupteur à pédale hors service, bloqué ou inopérant constitue un danger de mort ou de blessure grave. + = ANSI WARNING ! 1000 lbs 450 kg UNRESTRICTED CAPACITY MISE EN GARDE ! 500 lbs 230 kg = MAX TIP OVER HAZARD 500 lbs 230 kg 1000 lbs 450 kg Do not exceed the platform capacity indicated on the capacity indicator located on the platform control console. On units with inoperative or defaced capacity indicators, do not exceed 500 pounds maximum platform capacity. MAX DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER. 1704096 D 1703984 B CAN 1704104 Dual Capacity (DOM) ! 1704340 Battery Ventilation (CAN) WARNING TIP-OVER HAZARD MAX UNRESTRICTED CAPACITY 1704432 ! MAX DOM1 WARNING + EXPLOSION/FIRE HAZARD Keep all body parts away from any moving components. = 500 lbs 230 kg 1704340 A 750 lbs 340 kg UNRESTRICTED CAPACITY BATTERY COMPARTMENT No flames, smoking, or sparks. Failure to follow warning could cause death or serious injury. 1704479A Failure to follow these instructions could result in death or serious injury. L'inobservation de cet avertissement peut entraîner la mort ou des blessures graves. CAN 750lb/500lb Capacity (Platform) ! CRUSHING HAZARD AVERTISSEMENT Rechargez les batteries dans un local bien ventilé, dépourvu de flammes, de fumées ou d'étincelles. 1704995 Battery WARNING ! RISQUE D'EXPLOSIONT/D'INCENDIE 1704104 C 1704479 Crushing WARNING EXPLOSION / FIRE HAZARD Charge batteries in well ventilated area, free of flames, smoking, or sparks. Failure to follow warning could cause death or serious injury. 500 lbs 230 kg DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER. 500 lbs ! 1000 lbs 450 kg Ground control operation If any load is in the platform, fully retract the boom before lowering. 1704432 A 100 lb/450 N MAX DOM + = 750 lbs 340 kg ! MAX 500 lbs 230 kg WARNING TIP OVER HAZARD Do not exceed the platform capacity indicated on the capacity indicator located on the platform control console. On units with inoperative or defaced capacity indicators, do not exceed 500 pounds maximum platform capacity. MAX DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER. RESTRICTED CAPACITY 1704995 E 1704996 750lb/500lb Capacity (DOM) ! 1705088 WARNING Dual Capacity 500lb (DOM) TIP-OVER HAZARD 750 lbs 340 kg Ground control operation DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER. 500 lbs/230 kg 750 lbs/340 kg 100 lb/450 N MAX MAX DOM = 500 lbs 230 kg 1000 lbs 450 kg UNRESTRICTED CAPACITY 500 lbs 230 kg UNRESTRICTED CAPACITY RESTRICTED CAPACITY + MAX If any load is in the platform, fully retract the boom before lowering. DOM + = 1000 lbs 450 kg RESTRICTED CAPACITY MAX 500 lbs 230 kg MAX ! WARNING TIP OVER HAZARD Do not exceed the platform capacity indicated on the capacity indicator located on the platform control console. On units with inoperative or defaced capacity indicators, do not exceed 500 pounds maximum platform capacity. DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER. 1705088 C 1704996 D All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 46 1-877-JLG-LIFT | www.jlg.com JLG WARNING SAFETY DECALS DECALS 1705089 Dual Capacity 500lb (DOM) (MTB) ! 1705168 WARNING Platform Capacity 1200/1350 TIP-OVER HAZARD 1000 lbs 450 kg Ground control operation DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER. 500 lbs/230 kg 1000 lbs/450 kg UNRESTRICTED CAPACITY RESTRICTED CAPACITY 1705336 500 lbs 230 kg 100 lb/450 N MAX MAX + DOM DOM = 500 lbs 230 kg ! = WARNING TIP OVER HAZARD UNRESTRICTED CAPACITY On units with inoperative or defaced capacity indicators, do not exceed 500 pounds maximum platform capacity. Axles must be properly extended before lifting boom above horizontal or extending boom beyond 2ft (0.60m). 1000 lbs 450 kg DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER. 1705168 D 1705089 B 1705337 Inspection 1350SJP ! + MAX If any load is in the platform, fully retract the boom before lowering. Tip-Over (BCS) 1350SJP WARNING 1705387 ! WARNING THIS MACHINE MUST NOT BE USED UNTIL IT IS INSPECTED AND OPERATING PROPERLY. DO NOT operate this machine unless you have been properly trained as described in the JLG Operation and Safety Manual by a qualified person and authorized to operate this machine. Your training includes reading and understanding the safety, operating and maintenance instructions in manufacturer’s manuals, the Manual of Responsibilities, knowing your employers work rules and applicable governmental regulations. Danger High Voltage TIP OVER HAZARD ! This machine is equipped with a Boom Control System. Red light indicates the platform is outside the operating area and operation of certain boom functions may be disabled. Attempts to use the disabled functions cause to flash and an audio alarm to sound. Immediately return the platform to the ground. If stays on the system must be repaired by JLG authorized service personnel before machine can be used. DO NOT replace items (i.e., Batteries, tires, counterweight, etc) with items of different weight or specification because this will affect the stability of the machine. DO NOT modify or change this machine without written approval from the manufacturer Make sure all tires are in good condition and air filled tires are properly inflated Operate this machine with extreme caution. STOP all operation if a malfunction occurs. Check all functions at ground control and platform control stations. Select an area free of obstructions. Follow the Instructions in the Operating Manual, the Manual of Responsibilities and applicable standards for required inspections. Read and understand decals and placards. 1705337 A WARNING HAZARDOUS VOLTAGE INSIDE Do not remove cover with engine running. Refer to the Service and Maintenance Manual for servicing instructions. Death or serious injury could result from contact with energized conductors. 1705387 B Failure to follow instructions could result in serious injury or death. If this machine is not properly maintained, death or serious injury could occur. 1705680 1705492 WARNING Inspection (Platform) Tip-Over Platform ! Tip-Over/Crushing/Falling 1705679 TIP-OVER HAZARD · Do not exceed platform rated capacity or rated number of people. Evenly distribute load. · Do not expose platform to high winds or horizontal forces. · Machine must be on smooth, firm and level surface before elevating platform. · Do not drive with platform raised, or raise platform WARNING TIP-OVER HAZARD Installing or removing approved accessories or changing platform size requires recalibration of the boom control system. Reference the Service & Maintenance Manual for proper procedures. Failure to follow instructions could result in serious injury or death. · 1705492 A Do not operate this machine unless you have been properly trained as described in the JLG Operation and Safety Manual by a qualified person and authorized to operate this machine. Your training includes reading and understanding the safety, operating and maintenance instructions in manufacturer’s manuals, knowing your employers work rules and applicable governmental regulations. · Follow the Instructions in the Operating · 1705694 Crushing 1930ES WARNING CRUSHING HAZARD • Do not stand under or around platform during operation. • Use safety props for maintenance. Failure to follow these instructions could result in death or serious injury. 1705694A · · Manual,the Manual of Responsibilities and applicable standards for required inspections. Do not replace items (i.e., Batteries, wheels, counterweight, etc.) with items of different weight or specification because this will affect stability of machine. Do not modify or change machine without written approval from manufacturer. Operate this machine with extreme caution. STOP all operation if malfunction occurs. Improper use of this machine could cause death or serious injury. 1705679 C when on uneven, sloping or soft surfaces including trucks, trailers, railway cars, floating vessels, scaffolds or similar areas. Do not drive near drop offs, holes or other hazards. Make sure operating surface will support the machine. Make sure all tires are in good condition and air filled tires are properly inflated. If required, outriggers or stabilizers shall be extended and properly set. Do not carry sheet type materials (i.e. drywall, plywood, roof panels) outdoors or in any windy conditions as they may act as a wind sail. Death or serious injury could occur from a tip-over. · · · · · CRUSHING HAZARD · Always look in the direction of movement. · Keep clear of obstructions. · Keep all body parts inside platform during operation. Failure to follow instructions could result in death or serious injury. FALLING HAZARD · Keep both feet on platform floor. · Do not climb, sit or stand on platform guard rails. · Ensure entrance area is properly closed. · Do not use planks, ladders or similar items in platform to get added reach. · All guard rails must be properly installed during operation. Falling from platform could cause death or serious injury. 1705680 A All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 47 JLG WARNING DECALS 1706111 NOTICE WARNING Boom is latched to tongue. Tongue jack is retracted and folded up parallel to tongue. Outriggers are in fully stowed position. Hitch and ball load rating are adequate. Coupler hitch and trailer ball are same size. Safety chains properly attached to tow vehicle. All trailer lights work properly. Coupler is properly seated and latched. Trailer brakes adjusted and break away device is attached to tow vehicle. Coupler travel latch is latched and locked with pin or padlock. Contact your Motor Vehicle Authority for more information. Failure to follow these instructions could result in death or serious injury. ! WARNING DO NOT EXCEED 65 M.P.H. You are required to comply with all local, regional and national requirements for trailer operation including brakes, licensing, and any additional equipment that may be necessary. CHECK BEFORE TOWING! Wheel lug nuts for tightness. Inspection Speed Limit Read and understand Operation and Safety Manual and all decals before use. Do not tow trailer until it is inspected and operating properly. Tire pressure and condition. 1706135 1706112 Machine Operation WARNING Improper Use Hazard DO NOT operate this machine unless you have been properly trained as described in the JLG Operation and Safety Manual. Make sure that all of the outrigger set indicator lights are lit. DO NOT modify or change this machine without written approval from the manufacturer. Make sure that all the inspections listed in the JLG Operations And Safety Manual are done. or the legal speed limit whichever is lower Excessive speed could result in loss of control and serious injury or death 1706112B Failure to follow these instructions could result in death or serious injury. 1706111E 1706135B 1706298 Carry Personnel 1706300 1706296 1706302 Ether Warning Battery Warning Lull Pinch Point Boom Holes 1706296C WARNING PINCH POINTS could crush or cut causing death or serious injury. Pre - 1706300C Keep clear of pinch points. 1706302B 1706298D 1706306 1706385 Tip-Over Hazard Drop Bar 1706306A Check the condition of the approved fall protection device, lanyard and the designated attachment point to the platform. Wear approved fall protection items and attach to marked locations. Keep both feet on platform floor. Ensure entrance area is properly closed. DO NOT use planks, ladders or similar items in platform to get added reach. Falling from platform could cause death or serious injury. 1706386A Vehicle Roll Away Voltage Warning WARNING WARNING FALLING HAZARD 1706768 1706765 Crushing Platform Fall Hazard • Do not tie or disable gate. Failure to follow these instructions could result in death or serious injury. ! CRUSHING HAZARD Always look in the direction of movement. Keep clear of obstructions. Keep all body parts inside of platform during operation. WARNING HAZARDOUS VOLTAGE INSIDE Refer to the Service and Maintenance Manual for servicing instructions. Death or serious injury could result from contact with energized conductors. Failure to follow instructions could result in death or serious injury. 1706387 B 1706765A WARNING Riders could fall off machine causing death or serious injury. No riders. 1706768B 1706387 1706386 FALL HAZARD 1706385C WARNING All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 48 1-877-JLG-LIFT | www.jlg.com JLG WARNING SAFETY DECALS DECALS 1707015 Dual Capacity 3252347 Footswitch WARNING ! Ground control operation If any load is in the platform, fully retract the boom before lowering. 500 lbs 230 kg = 750 lbs 340 kg MAX UNRESTRICTED CAPACITY 100 lb/450 N MAX + DOM = 500 lbs 230 kg 750 lbs 340 kg Swing Loads DEATH OR SERIOUS INJURY COULD RESULT IF FOOTSWITCH IS DISABLED, BLOCKED OR INOPERATIVE. DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER. + 4110422 ! WARNING TIP-OVER HAZARD MAX SWINGING LOADS could cause MACHINE TIPOVER which could result in death or serious injury. WARNING ALWAYS • travel slowly • rig properly • use two tethers 4110422B 3252347 B RESTRICTED CAPACITY 1707015 B 90553027 Warning Decal 91143282 91143284 Warning Decal WARNING Warning Decal WARNING WARNING READ AND UNDERSTAND THE FOLLOWING PRIOR TO LIFTING PERSONNEL. WHEN LIFTING PERSONNEL USE ONLY A JLG MANUFACTURED PERSONNEL WORK PLATFORM. DO NOT DRIVE MACHINE WITH PERSONNEL IN PLATFORM. WHEN PERSONNEL ARE IN PLATFORM REMAIN SEATED IN CAB WITH PERSONNEL IN DIRECT LINE OF SIGHT. OPERATE CONTROLS LIGHTLY AND CAUTIOUSLY WHEN LIFTING PERSONNEL. READ AND UNDERSTAND PERSONNEL WORK PLATFORM USER'S MANUAL BEFORE LIFTING PERSONNEL. DO NOT USE PERSONNEL WORK PLATFORM WITHOUT THE PROPER JLG MATERIAL HANDLER/PERSONNEL WORK PLATFORM CAPACITY CHART DISPLAYED IN CAB. FAILURE TO COMPLY COULD RESULT IN SERIOUS INJURY OR DEATH. 9055-3027 REV B LEAD ACID BATTERIES PRODUCE FLAMMABLE AND EXPLOSIVE GASES WHEN CHECKING, TESTING, USING BOOSTER BATTERY OR CHARGING BATTERIES: * DO NOT USE SMOKING MATERIALS NEAR BATTERIES * KEEP FLAMES AND SPARKS AWAY FROM BATTERIES * WEAR SAFETY GLASSES * ASSURE BATTERY IS NOT FROZEN AND ELECTROLYTE IS AT PROPER LEVEL IN EACH CELL FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DAMAGE TO THE ELECTRICAL SYSTEM 9114-3284 STAY CLEAR OF PINCH POINT AREA ANYTIME ENGINE IS RUNNING. BEING IN PINCH POINT AREA COULD CAUSE SERIOUS INJURY OR DEATH. 9114-3282 1001101420 Sky Glazier Capacity WARNING MAX IMPORTANT TIP-OVER HAZARD For use on JLG Boom Lift models with side entry platform only. Properly secure panel before moving platform. Remove tray when not in use. Do not exceed platform/tray capacity. Refer to capacity decal on tray and SkyGLAZIER Operating Manual for capacity ratings. Observe all operating instructions and restrictions for use for this accessory. Failure to follow instructions could result in serious injury or death. 32 ft 2 3m 2 MODEL 400S,600A,600S,800A,800S,1200SJP,1350SJP,1250AJP 1000 lb/450 kg Zone M A X + 500 lbs 230 kg 250 lbs 110 kg + 250 lbs 110 kg 750 lb/340 kg Zone 45 lb 200 N + 150 lbs 70 kg 150 lbs 70 kg R MODEL 460SJ,660SJ,600AJ,600SJC,800AJ MODEL 860SJ 500 lb/230 kg Zone 90 lb 400 N 20mph 32 kph 9 m/s 440 lbs 200 kg 90 lb 400 N 500 lb/230 kg Zone + 250 lbs 110 kg 500 lb/230 kg Zone 45 lb 200 N 250 lbs 110 kg + 150 lbs 70 kg 45 lb 200 N 1001101420 C ! 150 lbs 70 kg 1001121813 Dual Capacity (ANSI) ! 1001121800 Dual Capacity (DOM) + = TIP-OVER HAZARD 500 lbs 227 kg 1000 lbs 454 kg UNRESTRICTED CAPACITY 100 lb/445 N MAX ANSI + = 1000 lbs 454 kg WARNING MAX 500 lbs 227 kg MAX ! Ground control operation If any load is in the platform, fully retract the boom before lowering. WARNING DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER. TIP OVER HAZARD Do not exceed the platform capacity indicated on the capacity indicator located on the platform control console. On units with inoperative or defaced capacity indicators, do not exceed 500 pounds maximum platform capacity. + = DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER. 1001121800 A 500 lbs 227 kg 1000 lbs 454 kg MAX UNRESTRICTED CAPACITY 100 lb/445 N MAX ANSI + = 1000 lbs 454 kg 500 lbs 227 kg MAX 1001121813 A All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 49 JLG WARNING DECALS 1001121814 Maximum Capacity (DOM) ! WARNING 1001122369 TIP-OVER HAZARD Dual Capacity Ground control operation If any load is in the platform, fully retract the boom before lowering. DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER. + = 500 lbs 227 kg WARNING ! TIP OVER HAZARD UNRESTRICTED CAPACITY + 100 lb/445 N MAX = 100 lb/445 N MAX 500 lbs 227 kg ANSI 1000 lbs 454 kg DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER. 1001122369 A MAX UNRESTRICTED CAPACITY 1001121814 A 1001122507 1001122508 Dual Capacity (ANSI) + = Dual Capacity (ANSI) 500 lbs 227 kg + = WARNING ! 1000 lbs 454 kg UNRESTRICTED CAPACITY ANSI = 500 lbs 227 kg ANSI 100 lb/445 N MAX + On units with inoperative or defaced capacity indicators, do not exceed 500 pounds maximum platform capacity. Axles must be properly extended before lifting boom above horizontal or extending boom beyond 2ft (0.61m). 500 lbs 227 kg 1000 lbs 454 kg + TIP OVER HAZARD MAX Do not exceed the platform capacity indicated on the capacity indicator located on the platform control console. On units with inoperative or defaced capacity indicators, do not exceed 500 pounds maximum platform capacity. MAX 100 lb/445 N MAX DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER. RESTRICTED CAPACITY 500 lbs 227 kg = + ANSI 1001122507 A 750 lbs 340 kg = ! 750 lbs 340 kg UNRESTRICTED CAPACITY WARNING MAX 500 lbs 227 kg TIP OVER HAZARD Do not exceed the platform capacity indicated on the capacity indicator located on the platform control console. On units with inoperative or defaced capacity indicators, do not exceed 500 pounds maximum platform capacity. MAX DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER. RESTRICTED CAPACITY 1001122508 A 1001122516 Dual Capacity (ANSI) ! WARNING TIP-OVER HAZARD Ground control operation If any load is in the platform, fully retract the boom before lowering. DEATH OR SERIOUS INJURY COULD RESULT FROM A TIP-OVER. + = 500 lbs 227 kg 750 lbs 340 kg MAX UNRESTRICTED CAPACITY 100 lb/445 N MAX + ANSI = 500 lbs 227 kg 750 lbs 340 kg MAX RESTRICTED CAPACITY 1001122516 A 1001126742 Sky Glazier Capacity WARNING MAX IMPORTANT TIP-OVER HAZARD Do not exceed platform/tray capacity. Refer to capacity decal on tray and SkyGLAZIER Operating Manual for capacity ratings. Observe all operating instructions and restrictions for use for this accessory. Failure to follow instructions could result in serious injury or death. For use on JLG Boom Lift models with side entry platform only. Properly secure panel before moving platform. Remove tray when not in use. 32 ft 2 3m 2 MODEL 400S,600A,600S,800A,800S,1200SJP,1350SJP,1250AJP,1500SJ 1000 lb/454 kg Zone M A X + 500 lbs 227 kg 250 lbs 113 kg 90 lb 400 N 500 lb/227 kg Zone + 150 lbs 68 kg 250 lbs 113 kg 45 lb 200 N 20mph 32 kph 9 m/s MODEL 460SJ,660SJ,600AJ,600SJC,800AJ MODEL 860SJ 750 lb/340 kg Zone + 150 lbs 68 kg 440 lbs 200 kg 90 lb 400 N R 500 lb/227 kg Zone + 150 lbs 68 kg 250 lbs 113 kg 45 lb 200 N 500 lb/227 kg Zone + 150 lbs 68 kg 250 lbs 113 kg 45 lb 200 N 1001126742 B ! All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 50 1-877-JLG-LIFT | www.jlg.com JLG WARNING/DANGER SAFETY DECALS DECALS 1703797 Warning/Danger Platform Warning/Danger ELECTROCUTION HAZARD This machine is not insulated. ! WARNING ! DO NOT OPERATE THIS MACHINE UNLESS ! WARNING TIP-OVER HAZARD When "CHASSIS OUT OF LEVEL" indicator light is on, retract and lower boom and move machine to a level surface. Failure to follow instructions could cause SERIOUS INJURY OR DEATH. ! Failure to follow instructions will result in death or serious injury. ELECTROCUTION HAZARD THIS MACHINE IS NOT INSULATED ! You must maintain a clearance of at least 10 feet between any part of the machine or load and any electrical line or apparatus charged up to 50,000 volts. One foot additional clearance is required for each additional 30,000 volts or less. Allowances must be made for machine movement and electrical line sway. SERIOUS INJURY OR DEATH will result from contact or inadequate clearance. ! Machine must be on a smooth, firm and level surface before swinging, elevating and/or extending boom. DO NOT exceed platform rated capacity. Make sure the operating surface will support the machine. DO NOT drive with platform raised, or raise platform, when on uneven, sloping or soft surfaces including trucks, trailers, railway cars, floating vessels, scaffolds or similar areas. DO NOT raise platform during high winds. DO NOT drive near drop offs, holes or other hazards. Make sure all tires are in good condition and air filled tires are properly inflated. To drive on a slope, boom must be retracted, lowered below horizontal and centered between the rear wheels. When “Chassis out of level” indicator light is on, retract and lower boom and move machine to a level surface. Driving with boom above horizontal or extended is restricted to smooth, firm and level surfaces free of obstructions. When DRIVING observe the following: All persons in the platform shall wear an approved fall protection device with lanyard attached to the designated attach point. • Direction of drive and steer functions are opposite to controls motion when boom is positioned over front axle. Always look at the decals on the chassis and drive/steer control for proper direction. Machine must be on a SMOOTH, FIRM and LEVEL surface before elevating and/or extending boom. • To drive on any slope, boom must be retracted, lowered below horizontal, and centered between rear wheels. Move controls slowly for smooth operation. Stop all operation if malfunction occurs. Watch for obstructions which may strike persons or machines. Death or serious injury could result from a tip-over. Check the condition of the approved fall protection device, lanyard and the designated attachment point to the platform. Wear approved fall protection items and attach to marked locations. Keep both feet on platform floor. Ensure entrance area is properly closed. DO NOT use planks, ladders or similar items in platform to get added reach. • Driving with boom above horizontal or extended is restricted to SMOOTH, FIRM, and LEVEL surfaces free of obstructions. THIS MACHINE MUST NOT BE USED UNTIL IT IS INSPECTED AND OPERATING PROPERLY. DO NOT operate this machine unless you have been properly trained as described in the JLG Operation and Safety Manual by a qualified person and authorized to operate this machine. Your training includes reading and understanding the safety, operating and maintenance instructions in manufacturer’s manuals, the Manual of Responsibilities, knowing your employers work rules and applicable governmental regulations. Follow the Instructions in the Operating Manual, the Manual of Responsibilities and applicable standards for required inspections. DO NOT replace items (i.e., batteries, tires, counterweight, etc.) with items of different weight or specification because this will affect the stability of the machine. FALLING HAZARD • Do not drive up or down grades exceeding machine gradeability or side slopes exceeding 5 degrees. Machine must be assisted (towed) up or down grades exceeding machine gradeability. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. WARNING TIP-OVER HAZARD WARNING Inspect the machine by performing the walk-around and safety checks listed on the checklist at the ground control station. ! ! Maintain a clearance of at least 10FT.(3M) between any part of machine or load and any electrical lines or apparatus. DANGER you have been properly trained as described in the JLG operation and safety manual by a qualified person and authorized to operate this machine. Training includes reading and understanding the safety, operating and maintenance instructions in the manufacturer's manuals, knowing your employer's work rules and applicable govermental regulations. Untrained operators could cause SERIOUS INJURY OR DEATH to themselves or others. ! ! ! DANGER ! 1702785 DO NOT modify or change this machine without written approval from the manufacturer. Operate this machine with extreme caution. STOP all operation if a malfunction occurs. Falling from platform could cause death or serious injury. 1702785 B Test foot switch for proper operation. CRUSHING HAZARD Always look in the direction of movement. Keep clear of obstructions. Direction of drive and steer functions are opposite to the motion of the controls when the platform is positioned over the front axle end. Always look at the decals on the chassis and drive / steer control for proper direction. Keep all body parts inside of platform during operation. Test high engine and high drive cut out switches for proper operation. Improper use of this machine could cause death or serious injury. Failure to follow instructions could result in death or serious injury. 1703798 1703797 D 1703816 Warning/Danger MTB Warning/Danger ! DANGER DANGER ELECTROCUTION HAZARD This machine is not insulated. · This machine is not insulated. · Maintain a clearance of at least 10FT.(3M) between any part of machine or load and Maintain a clearance of at least 10FT.(3M ) between any part of machine or load and any electrical lines or apparatus. Failure to follow instructions will result in death or serious injury. any electrical lines or apparatus. Failure to follow instructions will result in death or serious injury. ! ! WARNING CRUSHING HAZARD · Do not exceed platform rated capacity or rated number of people. Evenly distribute load. · Do not expose platform to high winds or horizontal forces. · Machine must be on smooth, firm and level surface · Do not operate this machine unless you before elevating platform. have been properly trained as described · Do not drive with platform raised, or raise platform in the JLG Operation and Safety Manual Failure to follow these instructions could result in death or serious injury. · Do not drive near drop offs, holes or other hazards. · Make sure operating surface will support the machine. · Make sure all tires are in good condition and air filled tires are properly inflated. · If required, outriggers or stabilizers shall be extended and properly set. · Do not carry sheet type materials (i.e. drywall, plywood, WARNING when on uneven, sloping or soft surfaces including trucks, trailers, railway cars, floating vessels, scaffolds or similar areas. roof panels) outdoors or in any windy conditions as they may act as a wind sail. Death or serious injury could occur from a tip-over. WARNING THIS MACHINE MUST NOT BE USED UNTIL IT IS INSPECTED AND OPERATING PROPERLY. DO NOT operate this machine unless you have been properly trained as described in the JLG Operation and Safety Manual by a qualified person and authorized to operate this machine. Your training includes reading and understanding the safety, operating and maintenance instructions in manufacturer’s manuals, the Manual of Responsibilities, knowing your employers work rules and applicable governmental regulations. Failure to follow instructions could result in death or serious injury. · Follow the Instructions in the Operating Manual,the Manual of Responsibilities and applicable standards for required inspections. · Do not replace items (i.e., Batteries, Wheels, counterweight, etc.) with items of Different weight or specification because this will affect stability of machine. · Do not modify or change machine without written approval from manufacturer. · Keep both feet on platform floor. · Do not climb, sit or stand on platform guard rails. · Ensure entrance area is properly closed. · Do not use planks, ladders or similar items in platform to get added reach. · All guard rails must be properly installed during DO NOT replace items (i.e., Batteries, tires, counterweight, etc) with items of different weight or specification because this will affect the stability of the machine. DO NOT modify or change this machine without written approval from the manufacturer. Make sure all tires are in good condition and air filled tires are properly inflated. Operate this machine with extreme caution. STOP all operation if a malfunction occurs. Check all functions at ground control and platform control stations. Select an area free of obstructions. Follow the Instructions in the Operating Manual, the Manual of Responsibilities and applicable standards for required inspections. Read and understand decals and placards. If this machine is not properly maintained, death or serious injury could occur. · Always look in the direction of movement. · Keep clear of obstructions. · Keep all body parts inside platform during operation. by a qualified person and authorized to operate this machine. Your training includes reading and understanding the safety, operating and maintenance instructions in manufacturer's manuals, knowing your employers work rules and applicable governmental regulations. operation. Falling from platform could cause death or serious injury. · Operate this machine with extreme caution. STOP all operation if malfunction occurs. Improper use of this machine could cause death or serious injury. 1703816 E 1703798 D All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 51 JLG WARNING/DANGER DECALS 1703818 Crush Hazard WARNING DANGER • This machine is not insulated. • Maintain a clearance of at least 10FT.(3M) between any part of machine or load and any electrical lines or apparatus. Failure to follow instructions will result in death or serious injury. • Do not stand under or around platform during operation. • Use safety props for maintenance. Failure to follow these instructions could result in death or serious injury. 1703818 B 1703924 Warning (Platform) CAN ! DANGER ! ELECTROCUTION HAZARD This machine is NOT insulated. Maintain a clearance of at least 10FT.(3M) between any part of machine or load and any electrical lines or apparatus. Failure to follow instructions will result in death or serious injury. ! Le non-respect de ces instructions provoquera des blessures graves, voire mortelles. WARNING ! THIS MACHINE MUST NOT BE USED UNTIL IT IS INSPECTED AND OPERATING PROPERLY. DO NOT operate this machine unless you have been properly trained as described in the JLG Operation and Safety Manual by a qualified person and authorized to operate this machine. Your training includes reading and understanding the safety, operating and maintenance instructions in manufacturer’s manuals, knowing your employers work rules and applicable governmental regulations. Follow the Instructions in the Operating Manual, the Manual of Responsibilities and applicable standards for required inspections. DO NOT replace items (i.e., Batteries, tires, counterweight, etc) with items of different weight or specification because this will affect the stability of the machine. DO NOT modify or change this machine without written approval from the manufacturer. Operate this machine with extreme caution. STOP all operation if a malfunction occurs. Test foot switch for proper operation. Test high engine and high drive cut out switches for proper operation. Improper use of this machine could cause death or serious injury. TIP-OVER HAZARD Machine must be on a smooth, firm and level surface before elevating and/or extending boom. DO NOT exceed platform rated capacity. Make sure the operating surface will support the machine. DO NOT drive with platform raised, or raise platform, when on uneven, sloping or soft surfaces including trucks, trailers, railway cars, floating vessels, scaffolds or similar areas. DO NOT raise platform during high winds. DO NOT drive near drop offs, holes or other hazards. Make sure all tires are in good condition and air filled tires are properly inflated. To drive on a slope, boom must be retracted, lowered below horizontal and centered between the rear wheels. When “Chassis out of level” indicator light is on, retract and lower boom and move machine to a level surface. Driving with boom above horizontal or extended is restricted to smooth, firm and level surfaces free of obstructions. Death or serious injury could result from a tip-over. FALLING HAZARD Check the condition of the approved fall protection device, lanyard and the designated attachment point to the platform. Wear approved fall protection items and attach to marked locations. Keep both feet on platform floor. Ensure entrance area is properly closed. DO NOT use planks, ladders or similar items in platform to get added reach. Falling from platform could cause death or serious injury. CRUSHING HAZARD Always look in the direction of movement. Keep clear of obstructions. Direction of drive and steer functions are opposite to the motion of the controls when the boom is positioned over the front axle. Always look at the decals on the chassis and drive / steer control for proper direction. Failure to follow instructions could result in death or serious injury. 1703924 D 1704575 Warning/Danger MTB ! DANGER ELECTROCUTION HAZARD This machine is not insulated. 1706676 Maintain a clearance of at least 10FT.(3M ) between any part of machine or load and any electrical lines or apparatus. 1230ES Instructions/Warning Failure to follow instructions will result in death or serious injury. ! WARNING WARNING THIS MACHINE MUST NOT BE USED UNTIL IT IS INSPECTED AND OPERATING PROPERLY: Do not operate this machine unless you have been properly trained as described in the JLG Operation and Safety Manual by a qualified person and authorized to operate this machine. Your training includes reading and understanding the safety, operating and maintenance instructions in manufacturer’s manuals, knowing your employers work rules and applicable governmental regulations. Follow the Instructions in the Operating Manual,the Manual of Responsibilities and applicable standards for required inspections. Do not replace items (i.e., Batteries, wheels, counterweight, etc.) with items of different weight or specification because this will affect stability of machine. Do not modify or change machine without written approval from manufacturer. Operate this machine with extreme caution. STOP all operation if malfunction occurs.. CRUSHING HAZARD Personnel shall not position themselves or other objects UNDER boom and platform or BETWEEN boom and turntable or chassis. When operating from ground control station avoid being BETWEEN rotating superstructure and chassis or other immovable objects. Failure to follow these instructions could result in death or serious injury. ! WARNING THIS MACHINE MUST NOT BE USED UNTIL IT IS INSPECTED AND OPERATING PROPERLY. DO NOT operate this machine unless you have been properly trained as described in the JLG Operation and Safety Manual by a qualified person and authorized to operate this machine. Your training includes reading and understanding the safety, operating and maintenance instructions in manufacturer’s manuals, knowing your employers work rules and applicable governmental regulations. Improper use of this machine could cause death or serious injury. DO NOT replace items (i.e., Batteries, tires, counterweight, etc) with items of different weight or specification because this will affect the stability of the machine. DO NOT modify or change this machine without written approval from the manufacturer. Make sure all tires are in good condition and air filled tires are properly inflated. Operate this machine with extreme caution. STOP all operation if a malfunction occurs. Check all functions at ground control and platform control stations. Select an area free of obstructions. Follow the Instructions in the Operating Manual, the Manual of Responsibilities and applicable standards for required inspections. Read and understand decals and placards. If this machine is not properly maintained, death or serious injury could occur. DANGER 1704575 C ELECTROCUTION HAZARD This machine is not insulated. Maintain a clearance of at least 10 ft/3m between any part of machine or load and any electrical line or apparatus. Failure to follow instructions will result in death or serious injury. MAX: 500 LBS 227 kg 100 LBS 445 N FALLING HAZARD Keep both feet on platform floor. Do not climb, sit or stand on platform guard rails. Ensure entrance area is properly closed. Do not use planks, ladders or similar items in platform to get added reach. All guard rails must be properly installed during operation. Falling from platform could cause death or serious injury. TIP-OVER HAZARD Do not exceed platform rated capacity or rated number of people. Evenly distribute load. Do not expose platform to high winds or horizontal forces. Machine must be on smooth, firm and level surface before elevating platform. Do not drive with platform raised, or raise platform when on uneven, sloping or soft surfaces including trucks, trailers, railway cars, floating vessels, scaffolds or similar areas. Do not drive near drop offs, holes or other hazards. Make sure operating surface will support the machine. Make sure all tires are in good condition. Do not carry sheet type materials (i.e. drywall, plywood, roof panels) outdoors or in any windy conditions as they may act as a wind sail. Death or serious injury could occur from a tip-over. CRUSHING HAZARD Always look in the direction of movement. Keep clear of obstructions. Keep all body parts inside the platform during operation. Failure to follow instructions could result in death or serious injury. Manufactured by: JLG Industries Inc. 1-877-JLG-LIFT WWW.JLG.COM 1706676 E All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 52 1-877-JLG-LIFT | www.jlg.com JLG WARNING/DANGER SAFETY DECALS DECALS 3252369 Warning/Danger ! WARNING Inspect the machine to be sure it is operating properly and perform the daily maintenance and safety checks listed on the check list at the ground control station. ! All persons in the platform shall wear the approved fall protection equipment with a lanyard attached to the designated anchorage point. ! Machine must be on a SMOOTH, FIRM, AND LEVEL surface before elevating and/or extending boom. ! ! ! Operate machine with extreme caution, STOP all operation if malfunction occurs. Operate controls slowly for smooth functions. Watch for obstructions which may strike persons or machine. WARNING ! When DRIVING observe the following -Direction of travel reverses in the relation to controls motion when boom is over front (steer)axle. -To drive on any slope, boom must be retracted , lowered below horizontal, and centered between rear wheels. -Do not drive up or down grades exceeding machine gradeability or side slopes exceeding 5°. Machine must be assisted (towed) up or down grades exceeding machine capability. -Drive with boom above horizontal or extended is restricted to SMOOTH, FIRM, and LEVEL surfaces free of obstructions. Exercise extreme caution if driving within 6 feet of any obstruction. Do not exceed rated platform capacity. IMPROPER OPERATION OF THIS MACHINE COULD CAUSE SERIOUS INJURY OR DEATH. ! DO NOT OPERATE THIS MACHINE UNLESS you have been trained in the safe operation of this machine. Training includes complete knowledge of the safety and operating instructions contained in the manufacturer’s manuals, your employer’s work rules, and applicable governmental regulations. Untrained operators could cause SERIOUS INJURY OR DEATH to themselves or others ELECTROCUTION HAZARD WARNING ! DANGER THIS MACHINE IS NOT INSULATED You must maintain a clearance of at least 10 feet between any part of the machine or load and any electrical line or apparatus charged up to 50,000 volts, one foot additional clearance is required for each additional 30,000 volts or less. Allowances must be made for operator error, boom deflection, and electrical line swaying. SERIOUS INJURY OR DEATH will result from contact or inadequate clearance. 3252369-B TIP-OVER HAZARD Chassis out of level When “CHASSIS OUT OF LEVEL” indicator light is on, retract and lower boom and move machine to a level surface. Failure to follow instructions could cause SERIOUS INJURY OR DEATH. 1001117185 Warning/Instruction (DOM) DANGER ELECTROCUTION HAZARD This machine is not insulated. Maintain a clearance of at least 10ft./3m between any part of machine or load and any electrical line or apparatus. IMPORTANT FREE-WHEELING INSTRUCTIONS Brake release button is located on the ground control station. Brakes must be released before towing or manually moving machine. Manufactured by: JLG Industries Inc. WWW.JLG.COM WARNING THIS MACHINE MUST NOT BE USED UNTIL IT IS INSPECTED AND OPERATING PROPERLY: FALLING HAZARD Keep both feet on platform floor. Do not climb, sit or stand on platform guard rails. Do not use planks, ladders or similar items in platform to get added reach. All guard rails must be properly installed during operation. Do not operate this machine unless you have been properly trained as described in the JLG Operation and Safety Manual and authorized to operate this machine. Your training includes reading and understanding the JLG safety and operation manuals for this model, and knowing your employers work rules and applicable governmental regulations Follow the instructions in the Operating Manual, the Manual of Responsibilities and applicable standards for required inspections. Do not replace items (i.e. Batteries, wheels, counterweight, etc.) with items of different weight or specification because this will affect stability of machine. Do not modify or change machine without written approval from manufacturer. Operate this machine with extreme caution. STOP all operation if malfunction occurs. Falling from platform could cause death or serious injury. TIP-OVER HAZARD Do not exceed platform rated capacity or rated number of people. Do not expose platform to high winds or horizontal forces. Machine must be on smooth, firm and level surface before elevating platform. Do not drive near drop offs, holes or other hazards. Make sure operating surface will support the machine. Death or serious injury could occur from a tip-over. CRUSHING HAZARD Always look in the direction of movement. Keep clear of obstructions. Keep all body parts inside the platform during operation. Improper use of this machine could cause death or serious injury. Failure to follow instructions could result in death or serious injury. MAX: 150 LBS 70 kg 300 LBS 136 kg 350 LBS 160 kg 350 LBS 160 kg 400 LBS 180 kg 100 LBS 445 N PLATFORM/ MATERIAL TRAY EXTENSION PLATFORM ALL OTHER PLATFORMS SP PLATFORM 1001117185 A All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 53 SKYJACK® CAPACITY DECALS SJ123468 700lb Capacity SJ126505 SJ124465 + + + + Side Force/No Wind Side Force 400 N (90 lb) 12.5 m/s (45 km/h) 318 KG. (700 LBS.) 182 KG. (400 LBS.) 136 KG. (300 LBS.) zz (28 mph) 400 N (90 lb) 124465AG 0 m/s (0 mph) zz 126505AE 123468AB ZZ SJ130315 SJ132333 Platform Capacity + + Platform Capacity + 454 kg (1000 lb) + + 318 kg (700 lb) + + + 136 kg (300 lb) ZZ 130315AA SJ132712 + 249 kg (550 lb) ZZ 317 kg (700 lb) + 204 kg (450 lb) ZZ + 113 kg (250 lb) 132333AA SJ132713 550lb Capacity + + + Wheel Load + 136 kg (300 lb) + + 113 kg (250 lb) 132712AA 570 kg ZZ (1260 lb) 132713AA All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 54 1-877-JLG-LIFT | www.jlg.com SKYJACK® CAUTION SAFETY DECALS DECALS SJ106515 Brake CAUTION INSTRUCTION FOR TOWING, PUSHING OR WINCHING. (REFER TO OWNERS MANUAL) 1. BEFORE TOWING, PUSHING OR WINCHING. VEHICLE MUST BE ON LEVEL GROUND. READ AND UNDERSTAND ALL INSTRUCTIONS. (REFER TO OWNERS MANUAL). 2. BLOCK OR CHOCK WHEELS TO PREVENT MACHINE ROLLING. 3. TURN MAIN DISCONNECT TO “OFF” POSITION. CAUTION: DO NOT USE HYDRAULIC POWER WITH BRAKE DISENGAGED. BRAKE IS SPRING LOADED. ALWAYS USE CAUTION, KEEP HANDS CLEAR OF MECHANISM. 4. ROTATE LOCK-OUT BLOCK WITH 3/4 INCH WRENCH AS SHOWN. TO DISENGAGE BRAKE REMOVE WRENCH IMMEDIATELY. BRAKE WILL RESET AUTOMATICALLY WHEN VEHICLE IS PUT BACK IN SERVICE. A 106515AC 5. OPEN FREE WHEELING VALVE (IF SO EQUIPPED) BY TURNING CCW. BEFORE PUTTING VEHICLE BACK INTO SERVICE TURN CW TO CLOSE. All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 55 SKYJACK® CONTROL PANEL DECALS SJ111814 Emergency Stop EMERGENCY STOP111814AB AJ SJ130434 Control Up/Down SJ130638 Drive/Lift ZZ ZZ 130638AB 130434AC All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 56 1-877-JLG-LIFT | www.jlg.com SKYJACK® DANGER SAFETY DECALS DECALS SJ115982 Drive Elevation DANGER SJ106406 DO NOT DRIVE THE ELEVATED PLATFORM OVER UNEVEN TERRAIN OR OBSTACLES HIGHER THAN 2 INCHES. DEATH OR SERIOUS INJURY WILL RESULT FROM IMPROPER USE OF THIS EQUIPMENT. Safety Bar DANGER Crushing Hazard Maintenance support Do not reach through scissors assembly when platform is raised without maintenance support properly positioned. Failure to avoid this hazard will result in death or serious injury! 115982AB A Proper use of maintenance support *Remove all material from platform. *Raise platform until there is adequate clearance to swing down maintenance support. *Swing maintenance support down from storage bracket into a vertical position. *Remove hands and arms from scissors area. *Lower platform until bottom end of maintenance support contacts labeled cross bar and scissors are supported by maintenance support. *Turn off main power disconnect switch. SJ119866 Pinch To store maintenance support A Scissors cross bar *Turn on main power disconnect switch and start engine (if equipped). *Raise platform until there is adequate clearance to swing up maintenance support. *Swing up maintenance support into storage bracket. *Lower platform. 106406AE ZZ 119866AF All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 57 SKYJACK® ILLUSTRATION/PICTORAL DECALS SJ102894 Fork SJ102896 Fork Lift Boot 102896AC ZZ SJ105983 On/Off ZZ 105983AB 102894AC ZZ SJ116577 SJ124362 SJ119674 Torque Hi/Low Emergency Battery Disconnect Do Not Wear SJ123628 Operator’s Manual + 12 ZZ 116577AC ZZ 9 123628AD ZZ 124362AD SJ126056 Railing Height Falling Hazard SJ124767 Lift Point/Tie Down SJ129838 Keep 43.75” (1.11 M) CE/ANSI/CSA/AS 41.50” (1.05 M) CSA/ANSI/AS 39.25” (0.99 M) ANSI / AS ZZ 6 zz 119674AD SJ125724 3 A KEEP 129838AC 124767AB ZZ ! 125724AB SJ130018 Harness Anchor SJ130634 Lift Up/Down/Drive SJ129839 Clear CLEAR A 129839AC ZZ 130018AA ZZ 126056AB ZZ 130634AC All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 58 1-877-JLG-LIFT | www.jlg.com SKYJACK® ILLUSTRATION/PICTORAL SAFETY DECALS DECALS SJ137988 Crush Hazard ! ZZ 137988AB All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 59 SKYJACK® MISCELLANEOUS DECALS SJ106691 SJ109442 Checklist Emergency Lowering Operator’s Checklist Inspect and/or test the following daily or at the beginning of each shift: Operating and emergency controls. Safety devices. Personal protective devices. Tires and wheels. Outriggers (if equipped) and other structures. Air, hydraulic and fuel system(s) (if equipped) for leaks. Loose or missing parts. Cables and wiring harnesses. Labels, warnings and operating manual(s). Guardrail system. Engine oil level (if equipped). Battery fluid level. Hydraulic oil level. A 106691AC EMERGENCY LOWERING PROCEDURE 1. Turn main power disconnect switch to off position. 2. Locate holding valve manual override knob at the bottom of lower lift cylinder. 3. To override valve, push and turn knurled knob counterclockwise. 4. To override upper lift cylinder valve (if equipped), use access rod located on top of base, push and turn counterclockwise. 5. Before lowering, confirm that all lift cylinder valves are in override position. 6. To lower platform, locate emergency lowering pull valve on hydraulic tray and pull. 7. Note: Before normal operation can be resumed, holding valve manual override knobs on lift cylinders must be pushed and turned clockwise to engage the holding valves. A 109442AF SJ110333 110V AC Outlet A CONNECT PLATFORM A.C. SUPPLY HERE110333AB All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 60 1-877-JLG-LIFT | www.jlg.com SKYJACK® WARNING SAFETY DECALS DECALS SJ106704 Description SJ106703 WARNING Orifice WARNING THE FITTING IN THIS CYLINDER IS EQUIPPED WITH A LOWERING SPEED ORIFICE. WHEN SERVICING OR CHANGING THE CYLINDER, THIS FITTING MUST BE RE-INSTALLED OR REPLACED WITH AN IDENTICAL NEW ONE. 106703AA A DO NOT OPERATE THIS EQUIPMENT WITHOUT PROPER AUTHORIZATION AND TRAINING. IT IS THE OPERATOR’S RESPONSIBILITY TO: 1. READ AND COMPLETELY UNDERSTAND ALL DANGERS, WARNINGS, CAUTIONS AND INSTRUCTIONS ON THE WORK PLATFORM AND IN THE OPERATING MANUAL. 2. THE OPERATOR SHOULD BE ASSURED THAT THE WORK PLATFORM HAS BEEN PROPERLY MAINTAINED AND INSPECTED IN ACCORDANCE WITH GOVERNMENT REGULATIONS BEFORE USING IT. 3. PERFORM ALL DAILY MAINTENANCE INSPECTIONS. *DO NOT EXCEED RATED LOAD. *DO NOT RAISE THE PLATFORM WHEN ON A SOFT AND/OR SLOPED SURFACE. RAISE THE PLATFORM ONLY WHEN ON A FIRM, LEVEL SURFACE. THE PLATFORM CAN BE LEVELED WITH PROPERLY POSITIONED OUTRIGGERS (IF EQUIPPED). *DO NOT USE WITHOUT RAILINGS, GATE, ENTRY CHAINS OR RAILING LOCKING PINS SECURED IN PLACE. SJ106705 Do Not Alter WARNING Do not alter or disable limit switches, safety switches or interlocks. 106705AC FAILURE TO OPERATE THIS EQUIPMENT IN ACCORDANCE WITH THE OPERATING INSTRUCTIONS ON THIS EQUIPMENT AND IN THE OPERATING MANUAL COULD RESULT IN SERIOUS INJURY OR EVEN DEATH! A 106704AC SJ115531 Falling WARNING AJ FALLING HAZARD! DO NOT OPERATE MACHINE WITHOUT SECURING PINS AT ALL HINGE POINTS. 115531AA All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 61 SNORKEL® CAPACITY DECALS SN0073085 Platform Capacity 650 SN0090589 Platform Capacity 500 All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 62 1-877-JLG-LIFT | www.jlg.com SNORKEL® CONTROLSAFETY PANEL DECALS DECALS SN0180846 Platform Control Box Front All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 63 SNORKEL® DANGER DECALS SN0072530 SN0072541 Electric Hazard Do Not Operate SN0073298 SN0074210 Foam/Solid Tires Electric/Tipping Hazard SN0323897 SN0323896 You Must Not Operate Electric Hazard SN0323899 Electric Hazard SN190989 Do Not Reach DANGER 19-0989 DO NOT REACH THROUGH HOLES. All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 64 1-877-JLG-LIFT | www.jlg.com SNORKEL® ILLUSTRATION/PICTORAL SAFETY DECALS DECALS SN0070540 Yellow Arrow SN0070541 Blue Arrow SN0071926 Diesel Fuel 007-0540 SN0080650 Lift SN0071927 Hydraulic Oil 007-0541 SN0083426 Tie Down Symbol SN0083431 Lift/Tie Down Location TB60 All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 1-877-JLG-LIFT | www.jlg.com 65 SNORKEL® MISCELLANEOUS DECALS SN0070922 SN0073667 Platform Rotator Inspect Wire Ropes SN0073492 Rotate While Greasing SN0074209 Pre-Start Instructions Booms SN0181562 Machine Complies With ANSI This machine is manufactured in compliance with ANSI A92.5 or A92.6 - section 4. 0181562 All original equipment manufacturer names, part numbers and part descriptions are used for reference or identification purposes only and are not intended to imply that any part listed is manufactured by those companies or that there is any affiliation with those companies. JLG, JLG GROUND SUPPORT, PARTSPLUS, SKYTRAK and LULL are registered trademarks of JLG Industries, Inc. GENIE and the color blue applied to certain parts of mobile elevating work platform structures are currently registered trademarks of Genie Industries, Inc. All other names/trademarks are the property of their respective owners and manufacturers. THE WARRANTIES SET FORTH IN THIS SECTION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER STATUROY, EXPRESSES OR IMPLIED, AND THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXCLUDED. THE REMEDIES PROVIDED HERIN ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR ANY FAILURE BY JLG TO COMPY WITH ITS WARRANTY OBLIGATIONS. CORRECTION OF THE NONCONFORMATIES IN THE MANNER AND FOR THE PERIOD OF TIME PROVIDED HEREIN SHALL CONSTITUTE COMPLETE FULFILLMENT OF JLG’S OBLIGATIONS REGARDING DEFECTIVE PRODUCTS, WHETHER THE CLAIMS BY THE CUSTOMER ARE BASED IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE. 66 1-877-JLG-LIFT | www.jlg.com DECALS 1-877-JLG-LIFT | www.jlg.com 67 GENIE-INDEX 68 Part Number Description Page Number Part Number Description Page Number GN27204 Arrow Blue 6 GN72970 Charger Operation 7 GN27205 Arrow Yellow 6 GN82239 Latch 9 GN27206 Triangle Blue 6 GN82366 Chevron Rando 9 GN27207 Triangle Yellow 6 GN82447 Auxiliary Lowering 9 GN27867 Swivel Lock 6 GN82559 Instruction, Annual Inspect Req 7 GN28161 Warning, Crush Hazard Hand 8 GN82561 Danger, Use Safety Arm 5 GN28164 Notice, Hazardous Materials 9 GN82567 Ground Control Panel 9 GN28165 Instruction, Footswitch Oper 7 GN82657 Battery Connect 7 GN28171 Danger No Smoking 6 GN97547 Danger, Electric Hazard 5 GN28174 Power to Platform 6 GN97887 Max Side Force ANSI 7 GN28175 Warning, Compartment Access 8 GN97890 General Safety Rules 5 GN28176 Manual Not Here 9 GN28177 Warning, Crush Hazard 8 GN28236 Warning, Improper Operation 8 GN30080 Notice, Max Load 500lb 7 GN31060 Danger, Do Not Alter Switch 4 GN31508 Electric Hazard Plug 4 GN32932 Tip-Over Axles 4 GN33952 Danger, Tilt Alarm 4 GN40434 Lanyard Anchorage Point 6 GN43089 Instructions Operate, GCP 7 GN43091 Danger, General Safety 4 GN43093 Tire Specs 9 GN43617 Tip-Over Battery 4 GN43618 Direction Arrows 6 GN43619 Safety Arm 9 GN43647 Notice, Operate Instructions 9 GN43696 Danger, Electric Hazard GS 4 GN44255 Crushing Hazard 4 GN44737 Tip-Over Trays 4 GN44753 LED Readout 9 GN44980 Power To Charger 115V 6 GN46262 Danger, Battery Safety 4 GN52475 Label, Transport Tiedown 6 GN52494 Caution, Crush Hazard Rails 9 GN52865 Annual Inspection 8 GN65052 Fault Codes 9 GN72853 Danger, Improper Use Hazard 4 1-877-JLG-LIFT | www.jlg.com JLG-INDEX Part Number Description Page Number Part Number Description Page Number 1700584 Patent (BLK) 43 1703072 No Forklift 36 1700818 LP Gas (ENG) 43 1703078 Legend 18 1701214 Warning, O/R (DOM/CSA) 45 1703084 Platform Display (CE) 18 1701499 No Tie Down/Lift 36 1703162 Fan Blade 36 1701500 Lift Here 36 1703175 Lanyard (GM,D-Rings) 43 1701502 Hydraulic Oil Level (High) 36 1703181 Warning, 500lb Capacity 45 1701504 Hydraulic Oil 36 1703398 Towing/Winch 41 1701505 Diesel 36 1703464 AC Power 43 1701509 Manual 36 1703465 MTB 18 1701518 Crushing 36 1703469 Max Tire Load 10 1701529 Arrow 36 1703470 Max Tire Load 10 1701542 Gasoline 36 1703472 Max Tire Load 10 1701640 Manual 36 1703475 Max Tire Load 10 1701644 Battery Charger 36 1703482 Max Tire Load 10 1701645 500lb Max Capacity 10 1703486 Max Tire Load 10 1702153 Inspection (DOM) 40 1703488 Max Tire Load 10 1702155 Battery Disconnect 36 1703493 Max Wheel Load 10 1702265 Manual Descent 40 1703678 Horn, Drive Speed, Level 18 1702276 Attach Safety Belt Here 43 1703681 JLG 33 1702294 No Hands 16 1703687 Direction Arrow 36 1702387 Platform Display 17 1703689 Horn, Drive Speed, Level 18 1702564 Stop 17 1703694 Capacity 10 1702565 Drive Steer 17 1703695 Legend 18 1702566 Lift Swing 17 1703696 Gradeability 40 1702567 Function Speed 17 1703697 Safety Prop 36 1702610 Ground Control Display 17 1703698 Towing 41 1702612 Lanyard (D-Ring) 43 1703706 Ground Control 18 1702676 Horn 17 1703797 Warning/Danger Platform 51 1702688 500lb Capacity 10 1703798 Warning/Danger MTB 51 1702784 Legend 17 1703804 Warning, Crushing 45 1702785 Warning/Danger 51 1703805 Danger, Electrocution 35 1702861 JLG Lift 8" 33 1703808 Legend, MTB 18 1702868 No Hands 16 1703813 Warning, Battery Ventilation 45 1702901 Manual Descent 41 1703814 Tie Down 37 1702908 Manual Descent 41 1703815 Attach Lanyard Here 43 1702961 Warning, Prop 65/Gas 45 1703816 Warning/Danger 51 1702962 Warning, Prop 65/DSL 45 1703817 Fork Lift 37 1702966 500lb Capacity 10 1703818 Warning, Crush Hazard 52 1-877-JLG-LIFT | www.jlg.com 69 JLG-INDEX 70 Part Number Description Page Number Part Number Description Page Number 1703819 Direction Arrow 37 1704465 MTB 400S 19 1703822 Manual Descent Instructions 37 1704479 Warning, Battery 46 1703823 Danger, Electrocution Hazard 35 1704480 Legend 20 1703868 Capacity 1932E2 10 1704484 Platform Display (DOM) 20 1703870 Wheel Load 1932E2 11 1704485 Platform Display 20 1703924 Warning, Platform (CAN) 52 1704487 Platform Disp (DOM) (750lb) 20 1703936 Danger (CAN) 35 1704502 Symbol Legend For Crawler 20 1703942 Warning, Crushing (CAN) 45 1704521 Gradeability 40 1703948 Warning, Crushing (CAN) 45 1704540 Storage Capacity 11 1703953 Warning, Crushing 45 1704559 Max Tire Load 11 1703960 Max Wheel Load 11 1704575 Warning/Danger MTB 52 1703984 Warning, Foot Switch (CAN) 46 1704707 Platform Display (DOM) 21 1703996 230kg/500lb Max Capacity 11 1704726 Lock Latch 37 1704000 Caution No Hands (CAN) 16 1704752 Max Tire Load 7200lb 11 1704016 Forklift Location 37 1704789 E450AJ 33 1704017 Brake Release Instructions 41 1704827 Max Tire Load 6200lb 11 1704096 Warning, Dual Cap (DOM) 46 1704828 Max Tire Load 8350lb 11 1704104 Warning, Dual Cap (DOM) 46 1704829 Max Tire Load 7200lb 12 1704125 Air Lead 37 1704903 Gradeability 40 1704134 Tire Max 11 1704952 Platform Display 21 1704192 Stop 18 1704993 Light Panel 750lb (DOM) 21 1704201 Capacity (ANSI) 11 1704995 Warning, 750/500 Cap (Platf) 46 1704239 Platform Display 19 1704996 Warning, 750/500 Cap (DOM) 46 1704240 Horn And Positrack 19 1704997 Stop 21 1704248 Battery Charger Instructions 40 1705015 Legend 21 1704252 Legend (MTB) 19 1705016 Manual Descent 37 1704253 Legend (Platform) 19 1705020 Capacity (2250lb-1020kg)(EXT) 12 1704260 EMS (Euro Requirement) 37 1705021 Capacity (1500lb-681kg)(EXT) 12 1704277 Lanyard Attachment 37 1705042 Max Load (Jacks) 12 1704340 Warning, Battery Vent (CAN) 46 1705059 Dual Cap 500lb (DOM) MTB 12 1704399 Wheel Load 1932E2 11 1705088 Warning, Dual Cap 500 (DOM) 46 1704401 Wheel Load 2032E2 (CE) 11 1705089 Warning, Dual Cap 500 MTB 47 1704403 Wheel Load 3246E2 11 1705096 Lift Diagram (1200/1350) 37 1704412 Oil Chart 43 1705132 Control ADE 43 1704432 Warning, Crushing 46 1705167 26250 Max Tire Load 12 1704445 Max Tire Load 11 1705168 Warning, Platf Cap 1200/1350 47 1704446 Charging Instructions 40 1705170 Headlight 21 1704460 Drive & Steer 19 1705171 Jib Stow 21 1-877-JLG-LIFT | www.jlg.com JLG-INDEX Part Number Description Page Number Part Number Description Page Number 1705173 Platform Display (DOM) 21 1705828 Footswitch (CE) 38 1705174 Stop 22 1705834 Battery Charging 43 1705175 Function Speed 22 1705850 Platform Color (Pro-Fit) 43 1705178 Max Tire Load 25000lb 12 1705864 JLG 12" 33 1705181 Dual Capacity 1200SJP 12 1705880 Cap (500lb/227kg/800lb/363kg) 13 1705190 Legend (ENG) 22 1705911 Nameplate/Load 23 1705212 Light Display (Ce) 22 1705912 Platform Box 23 1705303 CSA 43 1705913 Platform Display 24 1705309 Platform Legend 1350SJP 22 1705914 Platform Box 24 1705336 Warning, Inspection 1350SJP 47 1705941 Cap (500lb/227kg/800lb/360kg) 13 1705337 Warning,Tip-Over(BCS)1350SJP 47 1705947 Platform Display 24 1705351 Drive/Steer Instructions (DOM) 22 1705948 Platform Box 24 1705365 Load Management (BCS) 40 1705950 Platform Box 24 1705374 240V 60HZ 43 1705973 Platform Display 1250AJ 24 1705375 240V 3 Phase 60HZ 43 1705978 230Kg Capacity 14 1705387 Warning, Danger High Voltage 47 1706100 Gooseneck 10 38 1705429 Drive/Steer Instr (ENG/FR) 22 1706106 Capacity MTB T350 14 1705460 Sky Power 33 1706107 Capacity Platform T350 14 1705492 Warning, Tip-Over Platform 47 1706108 Legend Platform T350 24 1705638 Capacity (500lb-230kg) 12 1706111 Warning, Machine Operation 48 1705639 Capacity (800lb-363kg) 12 1706112 Warning, Speed Limit 48 1705640 Capacity (1000lb-454kg) 13 1706126 Max Tire Load 14 1705641 Capacity (1000lb-454kg) 13 1706128 Danger, Electrocution 35 1705647 Tire Load (1365lb/620kg) 13 1706135 Warning, Inspection 48 1705679 Warning, Inspection (Platform) 47 1706170 Gooseneck 6 38 1705680 Warning, Tip-Over/Crush/Fall 47 1706263 Brake Set 38 1705681 Electrocution 35 1706296 Battery Warning Lull 48 1705686 Legend (1930ES) 22 1706298 Warning, Carry Personnel 48 1705692 Control Box Location 38 1706300 Ether Warning 48 1705693 Safety Prop 38 1706302 Warning, Pinch Point Boom 48 1705694 Warning, Crushing 1930ES 47 1706306 Warning, Tip-Over Hazard 48 1705695 Electrocution 1930ES 35 1706310 Tire Load (1835lb/832Kg) 14 1705699 MTB 500lb Capacity (1930) 13 1706311 Tire Load (2070lb/939Kg) 14 1705744 Horn 23 1706350 Cover 38 1705745 Function Speed 23 1706385 Warning, Drop Bar 48 1705753 MTB CE (800A) 23 1706386 Warning, Fall Hazard 48 1705754 JLG 3.5" 33 1706387 Warning, Crushing Platform 48 1705781 JLG Logo 2.75" 33 1706667 1230ES 33 1-877-JLG-LIFT | www.jlg.com 71 JLG-INDEX 72 Part Number Description Page Number Part Number Description Page Number 1706670 1230ES Manual Descent 38 3252689 Capacity 15 1706671 1230ES Wheel Load 14 3252694 Capacity (800lb-365kg) 15 1706676 1230ES Instructions/Warning 52 3252751 Capacity (EXT Deck)C/D/L/B/J 15 1706708 Legend (Platform) 25 3252752 Capacity (EXT Deck)C/D/L/B/J 15 1706709 Legend (MTB) 25 3252761 120V 44 1706712 Display Panel (MTB) 25 3252768 Lift Diagram 450A (DOM) 38 1706741 Boom Control Select 38 3252781 Lift Diagrm 800S (DOM) 38 1706751 Legend 25 4100181 Hydraulic Oil 38 1706765 Voltage Warning 48 4105262 Boom Angle Indicator 15 1706768 Warning, Vehicle Roll Away 48 4107462 Side Console 28 1706832 1230ES Electrocution 35 4108302 Hydraulic Oil Level 38 1706890 Getting Started 41 4110188 Overlay LH 29 1706897 Quick Refernce 41 4110226 Lift Point/Tie Down 39 1706914 MTB 26 4110422 Warning, Swing Loads 49 1706924 Finishing 42 90553027 Warning Decal 49 1706926 User Flash Codes 26 91143282 Warning Decal 49 1706931 Legend 26 91143284 Warning Decal 49 1706941 Legend MTB 26 1001102601 MTB 600S 29 1706942 Max Tire Load 14 1001107849 Platform Display 29 1706946 MTB 27 1001107850 Platform Display 29 1706950 Legend MTB 27 1001107851 Platform Display 30 1707013 500 lb Max Capacity 600SJ 14 1001107926 Platform Display 30 1707014 Warning, Dual Capacity 14 1001107952 Platform Display (CE) 30 1707015 Warning, Dual Capacity 49 1001107954 Platform Display 800S 30 1707055 500Lb Cap (ENG/FRE/CAN) 14 1001108494 Legend (Platform) 600SC 31 1707110 Legend Platform 27 1001121803 Max Capacity 500lb/227kg 15 1707111 Platform Display (DOM) 28 1001121813 Warning, Dual Capacity (ANSI) 49 1707113 Platform Display (EURO) 28 1001122507 Warning, Dual Capacity (ANSI) 50 3251102 Generator 38 1001122516 Warning, Dual Capacity (ANSI) 50 3251243 120V-60Hz 43 1001126742 Warning, Sky Glazier Capacity 50 3251813 Built In The USA 43 1001091272 Icon (DOM) 29 3252347 Warning, Footswitch 49 1001092071 No Pipe Racks Allowed 40 3252369 Warning/Danger 53 1001094359 Troubleshooting ES 42 3252542 Controller Lid 28 1001101420 Warning, Sky Glazier Capacity 49 3252598 Model Tag 1932E2 34 1001107527 Stop 29 3252602 Box Lid W/ Tilt & BD 28 1001107853 Platform Display 30 3252620 Controller Box Lid 28 1001107927 Platform Display 30 3252672 Lift Diagram 400 (DOM) 40 1001107953 Platform Display (860SJ) 30 1-877-JLG-LIFT | www.jlg.com JLG-INDEX Part Number Description Page Number 1001108492 Legend (Platform) 400S 31 1001108493 Legend (Platf) 450A/450AJ/510AJ/600A/600S 31 1001108495 Legend (Platf) 740AJ/800A/800AJ 31 1001108496 Legend (Platform) 800S 32 1001110226 Light Display 32 1001117185 Warning/Instruction (DOM) 53 1001121657 Platform Display (CE) 32 1001121800 Warning, Dual Capacity (DOM) 49 1001121801 Max Capacity 500lb/227kg 15 1001121814 Warning, Maximum Cap (DOM) 50 1001122369 Warning, Dual Capacity 50 1001122384 Light Panel (Platform) 32 1001122508 Warning, Dual Capacity 50 1001131168 Stop & Auxillary Power 32 1001132175 Stop & Generator 32 1-877-JLG-LIFT | www.jlg.com 73 SKYJACK-INDEX 74 Part Number Description Page Number SJ102894 Caution, Fork 58 SJ102896 Fork Lift Boot 58 SJ105983 On/Off 58 SJ106406 Danger,Safety Bar 57 SJ106515 Caution, Brake 55 SJ106691 Checklist 60 SJ106703 Warning, Orifice 61 SJ106704 Warning, Description 61 SJ106705 Warning, Do Not Alter 61 SJ109442 Emergency Lowering 60 SJ110333 110v AC Outlet 60 SJ111814 Emergency Stop 56 SJ115531 Warning, Falling 61 SJ115982 Danger, Drive Elevation 57 SJ116577 Torque Hi/Low 58 SJ119674 Emergency Battery Disconnect 58 SJ119866 Danger, Pinch 57 SJ123468 700 lb Capacity 54 SJ123628 Operator's Manual 58 SJ124362 Warning, Do Not Wear 58 SJ124465 Side Force 54 SJ124767 Lift Point/Tie Down 58 SJ125724 Railing Height 58 SJ126056 Falling Hazard Decal 58 SJ126505 Side Force/No Wind 54 SJ129838 KEEP 58 SJ129839 CLEAR 58 SJ130018 Harness Anchor 58 SJ130315 Platform Capacity 54 SJ130434 Control Up/Down 56 SJ130634 Lift Up/Down/Drive 58 SJ130638 Drive/Lift 56 SJ132333 Platform Capacity 54 SJ132713 Wheel Load 54 SJ137988 Crush Hazard 59 1-877-JLG-LIFT | www.jlg.com SNORKEL-INDEX Part Number Description Page Number SN0070540 Yellow Arrow 65 SN0070541 Blue Arrow 65 SN0071926 Diesel Fuel 65 SN0071927 Hydraulic Oil 65 SN0072530 Danger, Electric Hazard 64 SN0072541 Danger Do Not Operate 64 SN0073085 Platform Capacity 650 62 SN0073298 Danger, Foam/Solid Tires 64 SN0073492 Rotate While Greasing 66 SN0073667 Inspect Wire Ropes 66 SN0074210 Danger, Electric/Tipping Hazard 64 SN0080650 Lift 65 SN0083426 Tie Down Symbol 65 SN0083431 Lift/Tie Down Location TB60 65 SN0090589 Platform Capacity 500 62 SN0180846 Platform Control Box, Front 63 SN0181562 Machine Complies With ANSI 66 SN0323896 Danger, Electric Hazard 64 SN0323897 Danger, You Must Not Operate 64 SN0323899 Danger, Electric Hazard 64 SN190989 Danger, Do Not Reach 64 SN0070922 Platform Rotator 66 1-877-JLG-LIFT | www.jlg.com 75 JLG Industries, Inc. 1 JLG Drive McConnellsburg, PA 17233-9533 Telephone 717-485-5161 Toll-free in US 877-JLG-LIFT Fax 717-485-6417 www.jlg.com An Oshkosh Corporation Company Form No.: CMP-DECAL-1112 Part No.: 401004 R012813 Printed in USA