Central Office Products 734 MULTI COAXIAL CABLE Construction Details Conductor · 20 AWG solid silver plated, tinned or bare copper. Insulation · High Density foam Application · Intended for interconnection of transmission and switching systems equipment. polyolefin insulation. Shield · Aluminum/polyester tape longitudinally applied over the insulation. The aluminum side faces outward and is in contact with the overall braid shield. · Overall braid shield comprised of 34 AWG tinned annealed copper applied with minimum coverage of 80%. Features · UL listed as Type CMR and CSA · · certified as Type CMR. Suitable for DS3 (44.73 Mb/s) transmission rates with maximum reach of 450 ft. (137 m). Suitable for indoor use up to 75ºC. Jacket · Gray polyvinylchloride jacket. Cable Core · 8 coaxial cables are cabled together and wrapped with a mylar foil. Jacket · Overall gray PVC jacket. Electrical Characteristics · Nominal electrical characteristics are shown in Table 1. Packaging · Standard shipping information is as shown in Table 2. Table 1 - Electrical Characteristics Max D.C. Con'dr Resistance Min Insulation Resistance Nom Coaxial Capacitance Dielectric Strength (con'dr to shield) Nom Characteristic Impedance Structural Return Loss Velocity of Propagation 11 ohms/1000 ft at 20ºC 6 Gohms/1000 ft at 20ºC 17.0 pF/ft at 1000 Hz 3.5 kV DC for 5 seconds 75 ohms 30 dB minimum between 15 and 95 MHz (100% of cable) 80% Central Office Products 734 MULTI COAXIAL CABLE Table 1a – Nominal Attenuation Frequency in MHz 1.000 1.024 4.224 5.000 10.000 17.184 22.368 25.920 44.736 50.000 69.632 77.760 100.000 137.088 200.000 Attenuation (dB/100 ft) 734D Standard (Signal) 0.270 0.272 0.506 0.546 0.766 1.012 1.160 1.250 1.650 1.740 2.070 2.190 2.490 2.940 3.580 CEPT-1 (2.048 Mb/s) CEPT-2 (8.448 Mb/s) CEPT-3 (34.368 Mb/s) DS-3 (44.730 Mb/s) STS-1 (51.84 Mb/s) CEPT (139.264 Mb/s) STS-3 (155.52 Mb/s) DS-4 (274.176 Mb/s) Table 2 – Ordering Information Type 734D Part No. BES 1235-8 Conductor Silver Plated Copper Conductor Diameter 0.0311 inch 0.79 mm Insulation Diameter 0.148 inch 3.76 mm Coaxial Diameter 0.235 inch 4.97 mm Overall Diameter Packaging Product Weight .850 Bulk 325 lb/kft Center Pin Tool XXX XXX XXX XXX 010-0055 Not Required Center Pin Die Size XXX XXX XXX 0.068 x 255 XXX Not Required Table 3 – Connector Cross-Reference Manufacturer ADC Amphenol AT & T Gilbert Trompeter ITT Cannon RF BNC Part No. BNC-734 31-70008-1000 405784273 G-BNC-62P145 UPL-220-025 W58-124-9069910 Crimp Tool WT-1 CTL-6 407060235 G-CRT-255 CT-3 050-000-0030050 Die Part No. WD-2 227-980-1 407060284 XXX CD3-2 050-000-0030052 Die Size XXX XXX XXX XXX 0.255 X 0.480 Same Best-Tronics Manufacturing, Inc. 18500 Graphics Court, Tinley Park, IL 60477 Phone: 708 802-9677 Fax: 708 802-9676