TM
Table of Contents
Mell Gear Stock Replacement Warranty
Mell Gear Product Overview
Mell Gear Timing Chains
Mell Gear Sprockets
Mell Gear Tensioners, Guides & Dampers
Mell Gear High Performance Timing Sets
2
3
4
5
Mell Gear product tips
When to replace timing components?
Timing Installation tips - What you need to know
• Timing Marks
• Free Running or Interference Engines
• Timing Chain & Sprocket Installation
• Tensioners
• Guides, Dampers & Tensioner Arms
• Timing Belts
• Gear Installation
Hydraulic Timing Chain Tensioners
• Effects of oil viscosity, oil filters & oil pressure
Automotive Application Listings
Marine Application Listings
Mell Gear High Performance Parts Warranty
Mell Gear Performance Application Listings
Mell Gear High Performance Timing Set Comparison Chart
Stock Replacement Numerical Listings
High Performance Numerical Listings
Interchange Listings
7
8
10
11
247
253
254
255
281
297
298
The information in this catalog has been gathered from the best available sources. Every possible effort has been made to verify accuracy. Melling Engine
Parts does not accept any responsibility for errors or omissions. We would appreciate being advised of any inaccuracies which might come to your attention.
Melling Engine Parts reserves the right to update product specifications at any time without notice.
Before installing any part listed, consult the appropriate manufacturer’s instruction manual for detailed installation instructions.
C 2015 Melling Engine Parts All Rights Reserved
NO PORTION OF THIS CATALOG MAY BE REPRODUCED WITHOUT THE WRITTEN PERMISSION OF MELLING ENGINE PARTS
ENGINE PARTS
TM
LIMITED WARRANTY
All products sold by Melling Engine Parts are warranted to the consumer owner for one (1) year
from the date of installation to be free from defects in materials or workmanship.
This warranty does not apply to any product that has been altered, tampered with, such as taken
apart, misused, subject to excessive operating conditions, malfunctions because of foreign
particles such as engine dirt or pieces of other deteriorating components, products used in a
vehicle that has been altered for other than intended purposes. Also, performance products are
not covered under this warranty including products used for off-road or racing purposes.
The Melling Engine Parts warranty does not consider low or no oil pressure grounds for
extensive engine repairs nor complete replacement of damaged engines. This consideration
is based on the fact that all vehicles have as standard equipment, either warning lights or
gauges, which is to warn the operator of low oil pressure, low oil level or no oil pressure
prior to the occurrence of the engine damage. If an operator chooses to ignore these gauges
or warning lights or if the gauges or warning lights are not in operating condition, this
constitutes negligence on the operators part. Therefore Melling Engine Parts cannot be
responsible for the cost of these extensive damages.
If a product fails to conform to this warranty, the product should be returned to the place of
purchase, then sent back, prepaid to Melling Engine Parts. If Melling Engine Parts determines that
this product fails to conform to this warranty, it will either replace the product or refund its original
purchase price, at the option of Melling Engine Parts.
THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR WARRANTY OF QUALITY,
WHETHER EXPRESSED OR IMPLIED, EXCEPT THE WARRANTY OF TITLE. ALL IMPLIED
WARRANTIES ARE LIMITED TO THE DURATION OF THE WARRANTY. THE REMEDIES SET
FORTH IN THE WARRANTY ARE EXCLUSIVE.
Some states do not allow limitations on how long an implied warranty lasts or exclusion or
limitation of incidental or consequential damages, so the above limitations or exclusions may not
apply to you. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Quality Timing Components Since 1946
TM
MELL-GEAR offers a complete line of engine timing for all of your automotive needs.
Everything from chains, sprockets, timing gears, timing chain tensioners, guides and
dampers. We offer both three piece sets and complete timing kits for today’s modern
engines. Timing belts, belt tensioners and pulleys are also available. Besides coverage
for stock applications MELL-GEAR also offers coverage for popular high performance,
marine and industrial applications.
Quality Timing Conponents Since 1946
1
TM
MELL-GEAR Automotive Timing Chains
Timing components offer design and manufacturing refinements that contribute to the
accuracy of valve timing, to the durability of the chain, and to customer satisfaction. Some of
today’s modern engines use up to four different timing chains within one engine!
MG silent timing chains have generated tooth-contacting surfaces which permit smooth,
progressive engagement of load reducing chain noise. Silent chains slide against sprockets
rather than roll. This method of engagement provides a uniform velocity ratio between
crankshaft and camshaft. By minimizing chain speed variations, accurate timing is maintained.
Segmental bushed timing chain has machined broached pitch holes, hardened segmental
bushings and precision ground pins. These features assure smooth running and dependable
operation.
Most late model engines use silent chains and require a smooth surface finish to protect
tensioner arms, guides and dampers from premature wear. These chains are sometimes
referred to as having a “fine” or “hammered” finish.
Roller chain is frequently used for heavier duty applications including high performance.
We offer two types of roller chains, single and double. Roller chains feature link pins, roller
supports, support links, outer links and specially hardened rollers to withstand high speed
wear and heavy shock loads. This design lowers friction and wear on the sprockets due to the
hardened rollers which act like a bearing. These chains require proper lubrication, any grit or
debris trapped in the rollers will cause rapid wear. This type of chain produces more noise,
especially if not properly dampened.
2
Quality Timing Components Since 1946
TM
MELL-GEAR Sprockets
Sprockets provide precise synchronization, camshaft and crankshaft sprockets are specifically
designed to be used with Mell-Gear timing chain. Material selection, sprocket design, manufacturing and testing procedures insure smooth, quiet, efficient performance of the drive system.
Sprockets come with visible timing marks to simplify installation.
If any one of the sprockets show damage or wear then all timing components should be
replaced to insure accurate timing. This will prevent possible damage caused by mixing new
parts with old worn parts.
Camshaft sprockets are primarily made from cast iron or powder metal. Billet steel is used for
high performance applications and are fitted with either a thrust washer or a thrust bearing for
increased performance and reliability. Camshaft sprockets also include cam sensor triggers
where required for late model computer controlled fuel management systems.
Crankshaft sprockets are made of sintered iron or steel. Because of the 2:1 ratio common to
timing drives, these sprockets have half as many teeth as the camshaft sprocket. This means
each tooth contacts the chain twice as many times as the corresponding camshaft sprocket.
For this reason crankshaft sprocket teeth are hardened to provide balance in tooth wear. Billet
steel induction hardened sprockets with multiple key-ways are often used for high performance
applications increasing performance and reliability.
Quality Timing Components Since 1946
3
TM
MELL-GEAR Tensioners, Guides and Dampers
Today’s late model engines use both single and dual overhead cam designs requiring complex
timing systems. As timing chains get longer they require the use of tensioners, tensioner arms,
chain guides and dampers.
Tensioners apply a specified amount of tension to the timing chain or timing belt. There are two
types of tensioners. Spring loaded tensioner using spring pressure to apply tension to the chain
or belt. Hydraulic tensioners use engine oil pressure to hydraulically operate the tensioner
applying tension to the chain or belt. Some hydraulic tensioners use an oil squirt nozzle to spray
oil onto the timing chain for extra lubrication.
Chain guides and dampers are typically fixed to the cylinder block or cylinder head providing a
smooth surface for the timing chain to ride on. They are typically made of solid nylon or
aluminum backed with a nylon surface providing support for smooth chain operation.
4
Quality Timing Components Since 1946
TM
MELL-GEAR Performance
Good = Heavy Duty, Mild Performance Sets, “402” Series
These sets offer high quality / low cost for heavy duty or mild
performance applications. They contain double row roller
timing chains providing extra strength and durability. They are
offered with a .200” chain for small blocks or a .220” chain for
big blocks and also contain cast iron camshaft sprockets. This
is an excellent upgrade over the OE timing components.
Better = Entry Level or Street Enthusiast “404” Series
These sets contain a .250” double row roller timing chain. An
induction heat-treated billet crankshaft sprocket to extend
tooth life and 3 keyways providing +/- 4 degree crankshaft
adjustment, +/- 2 degree camshaft adjustment. Camshaft
sprockets are manufactured from ductile iron or induction
heat-treated cast iron.
Better = Entry Level or Street Enthusiast “405” Series
These sets contain a very large .334” seamless single roller
timing chain, 3 keyway crankshaft sprocket providing +/4 degree crankshaft adjustment, +/- 2 degree camshaft
adjustment and a cast iron camshaft sprocket.
Best = Race Billet Steel “485” Series
These sets contain a .250” double row roller timing chain with
a 9 keyway induction heat treated billet steel crankshaft
sprocket providing +/- 8 degree crankshaft adjustment, +/4 degree camshaft adjustment. Billet steel camshaft sprockets
use a bronze thrust washer or one piece thrust bearing for
increased performance and reliability. Recommended for
engines that are upwards of 600 to 700 horse power or use
heavy valve springs.
Quality Timing Components Since 1946
5
TM
MELL-GEAR Performance
Gear Drive = Street / Strip, “484” Series
Gears are CNC machined from billet steel and heat treated
for maximum performance. Included are precision cut idler
gears and plates, camshaft button, cam lock tab and thrust
washer where applicable. 3 keyway crankshaft sprocket
providing +/-4 degree crankshaft adjustment and color
coded dowel pin inserts providing +/-2 degree camshaft
adjustment. Part numbers with a “Q” suffix are quiet if you
don't like the simulated “blower” sound.
By changing camshaft timing, you can take advantage of
the camshaft characteristics. Retarding cam timing will
typically increase high RPM horsepower. Advancing cam
timing will typically increase low end torque.
6
Quality Timing Components Since 1946
TM
When to replace timing components?
There are more bearings in a timing chain than there are in an entire engine. Wear in chain,
sprockets, tensioners, guides and dampers means timing lag which results in poor engine
performance, fuel economy and could cause the check engine light to come on in computer
controlled applications. Common symptoms include excessive noise upon engine start up or
a rattling noise heard at engine idle speeds.
The same is true of worn, frayed or stretched timing belts and worn timing gears. Engine
manufacturers using timing belts typically specify a mileage limitation or age period for belt
replacement. Avoid costly engine damage, change your timing belt at the recommended
interval or every 72 months.
Knowing how to replace timing components correctly is just as important as knowing when to
replace them. When a timing drive system is installed correctly you’ll have the benefit of silent,
smooth operation, as well as efficient engine performance.
When one component of a timing drive system requires replacement, the entire system should
be replaced to insure accurate synchronization.
Quality Timing Components Since 1946
7
TM
Installation Tips
Below are general installation tips to aide in using our products. These are not intended to
replace the (OEM) Original Equipment Manufacturer’s installation procedures, specifications
or technical bulletins. Always consult the latest information before performing any repairs.
Timing Marks
When replacing a timing chain or timing belt be sure to align the timing marks. Timing marks can
be found on sprockets, gears, and chain links. Depending on the application sometimes the
cylinder block and cylinder head will also be marked.
Free Running or Interference Engine, You Need To Know
First identify what type of engine you are working on. A free running or non-interference engine
has adequate clearance to prevent the valves from striking the pistons when camshaft and
crankshaft synchronization is lost. Interference engines have close tolerances allowing valves to
strike the pistons during engine operation if camshaft and crankshaft synchronization is lost.
When servicing an interference engine you must use the proper tools. The camshaft and crankshaft must be locked into place by using bolt, pins or stop plates to prevent damage. If either
shaft is rotated while servicing the timing system severe engine damage could occur.
Timing Chain & Sprocket Installation
Press or use a sleeve that contacts the sprocket hub to gently tap the camshaft and crankshaft
sprockets on evenly keeping them parallel while making sure the keys are properly aligned and
seated. Any excessive force applied to the components during installation will stretch and
damage the chain. Never hit a timing chain with a hammer. The pins and links are hardened and
will crack upon impact. Timing chains should be soaked in clean motor oil prior to installation.
As a timing chain wears, slack develops in the pivots of a silent chain and the rollers and supports
of a roller chain. This slack causes the chain to elongate and change its pitch. This is often called
timing chain stretch but the chain does not actually stretch. As the chain wears it causes each
link to move apart making the chain longer. It’s difficult to determine how much a used chain has
worn so they should always be replaced.
Always use a matched set of chain and sprockets. When one component must be replaced replace all of the components!
Tensioners
Spring type tensioners: Use a pin to hold the assembly in place during installation. The pin must
be removed to apply tension to the chain / belt after installation. Check to make sure the tensioner
assembly moves freely without binding.
8
Quality Timing Components Since 1946
TM
Installation Tips (Continued)
Tensioners
Hydraulic tensioners: Engine oil pressure hydraulically operates the tensioner. When installing
these tensioners make sure the passage supplying the oil to the tensioner is clear of any dirt and
sludge. Always use a new mounting gasket or O-ring as required. Insufficient oil pressure or oil
leaks at the tensioner will result in timing system failure! Some tensioners use an oil squirt hole to
lubricate the timing system so be sure they are aligned properly. If the tensioner uses a pin to
hold the assembly together during installation be sure to remove it once installed. If the tensioner
uses a ratchet mechanism do not pry the mechanism out attempting to apply more pressure on
the chain. This will damage the ratchet mechanism upon engine startup! Be sure to follow the
latest OEM installation instructions.
Guides, Dampers, Tensioner Arms
Timing chain routing is done using guides to provide support for the chain. Dampers are used to
reduce chain noise. These are generally made of solid nylon or aluminum backed with a nylon
surface and must be installed using the correct mounting bolts. Tensioner arms are typically
mounted using a shouldered bolt and should move freely to apply tension to the chain. Torque all
mounting bolts to the manufacturer’s specifications. Over-torqueing the mounting bolts can crack
and damage these type of parts.
Timing Belts
Timing belts are inside the engine and seldom thought of as part of routine maintenance. When
replacing a timing belt always check the belt for contamination from engine oil or coolant leaks.
If contamination is found it must be repaired prior to installing a new belt. Never stretch a belt over
a pulley or sprocket as this may cause damage to the cords inside the belt. Also, do not twist or
crimp a new timing belt. If the belt uses a spring loaded or hydraulic tensioner make sure to
release the pin after installation or the tensioner will not provide the correct belt tension and
engine damage could occur.
Gear Installation
Check the shaft to be sure it’s true all the way around by using a dial indicator. Check bearing
clearance, if excessive the bearings and shaft should be replaced. Make sure there is no dirt,
grit or other deposits in the teeth or bore of the gears.
To install metal gears (including aluminum) heat to about 200° F using a hot plate to heat oil or
boiling water. While hot the new gears should fit easily and freely onto the shaft. Make sure the
shaft, gear key-way and timing marks are in the correct position.
The final step is to pour oil over the gears and replace the timing cover using a new seal and
gasket. On initial startup run the engine slowly for the first 10 minutes to allow the oil to work
into the gears.
Quality Timing Components Since 1946
9
TM
Installation Tips (Continued)
Gear Installation
When installing the gears by driving them on with a pipe or tube make sure it does not exceed the
diameter of the gear’s hub. The same precaution should be observed if an arbor press is used.
Proper pressure on the hub will insure alignment and prevent damage to gears, wheather metal or
fiber.
Once installed gear backlash should be checked by using a feeler gauge. Install between the
teeth of the mating gears. This measurement should not be more than .008” or less than .003” on
the gears pitch line, and should always be on the same side of the teeth. For complete accuracy,
check the gear at four different locations approximately 90° apart.
The final step is to pour oil over the gears and replace the timing cover using a new seal and
gasket. On initial startup run the engine slowly for the first 10 minutes to allow the oil to work
into the gears.
Hydraulic Timing Chain Tensioners and the Effects
of Engine Oil Viscosity, Oil Filters and Oil Pressure
• Using the wrong oil viscosity will cause premature wear eventually causing the timing system to
fail. Hydraulic tensioners are designed to operate at a specified oil flow and pressure. A lower
viscosity oil will flow faster than a heavier oil, especially when cold. Timing chains also have very
specific lubrication requirements. Modern engines with timing chains, may have oil specifications
that only synthetic oil will meet.
• Another source of timing system wear happens when using oil filters without anti-drain back
valves. The anti-drain back valve helps keep oil in the passages leading to the hydraulic tensioner.
It does this by blocking the return oil through the filter, to the oil pan. Without oil in the passages,
it takes longer for the oil pump to pressurize the tensioner. Lack of tension prevents slack in the
timing chain from being taken up. This allows the timing chain to jerk upon startup, increasing
wear and will eventually break the chain guides and dampers.
• Oil pressure and oil flow is critical to hydraulic tensioner operation. When replacing timing
components you must make sure the following meet the manufacturers specifications.
• Engine oil pressure and flow at both hot and cold temperatures.
• Engine oil is filled to the correct level.
• The engine oiling system is clean. Dirt and sludge will plug the small oil passages in
hydraulic tensioners. Depending on the design some tensioners use an internal screen
or filter that will become plugged. Tensioner internal check valves will become in-operative.
• New or rebuilt engines. Oiling system must be properly primed before startup.
10
Quality Timing Components Since 1946
TM
Automotive Listings (Includes Industrial & Agriculture)
Acura
Alfa Romeo
American Motors
Audi
BMW
Buick
Cadillac
Case Tractor
Chevrolet
Chrysler Industrial
Chrysler
Continental
Daewoo
Daihatsu
Desoto
Detroit Diesel
Dodge
Dodge Truck
Eagle
Ford
Ford Industrial
Ford Tractor
Ford Truck
GMC/Chevy Trucks & Vans
Henry-J
Hercules
Honda
Hummer
Hyundai
I.H.C. Tractor & Power Units
I.H.C. Truck
Infiniti
Isuzu
12
13
14
16
18
20
33
40
40
58
59
65
66
66
66
67
68
77
83
85
98
99
100
113
130
130
131
135
136
138
138
140
142
Jaguar
Jeep
Kia
Lexus
Mazda
Mercedes Benz
Mercury/Lincoln
MG
Mitsubishi
Nissan/Datsun
Nissan Industrial
Oldsmobile
Oliver Tractor
Opel
Peugeot
Plymouth
Pontiac
Porsche
Renault
Rover
Saab
Saturn
Scion
Studebaker
Subaru
Suzuki
Toyota
Triumph
Volkswagen
Volvo
Waukesha
White PDQ Truck
White truck
146
146
150
152
153
159
160
172
172
177
184
185
197
197
198
198
205
221
222
223
223
224
228
228
228
229
232
240
241
244
245
245
245
Marine Listings
247
Mell Gear Performance
254
ENGINE PARTS
TM
CYLINDER SLEEVES TM
A
COMPANY
11
ACURA
Year
Line
1.6 (D16A1) DOHC
1986-89
1
1.6 (D16Y8) DOHC
1997-00
2
1.7 (B17A1) DOHC
1992-93
3
2.5 (C25A1) SOHC
1986-87
11
4) SOHC
1.7 (D17A2) SOHC
2001-05
4
2.7 (C27A1) SOHC
1987-90
12
3.5 (C35A1) SOHC
1996-04
19
1.8 (B18C1,C5) DOHC
1994-01
5
3.0 (J30A1) SOHC
1997-99
13
3.5 (6VE1) DOHC
1998-99
20
1.8 (B18A1,B1) DOHC
1990-01
6
3.2 (6VD1) SOHC
1996-97
14
3.7
2007-14
21
2.2 (F22B1) SOHC
1997
7
3.2 (C32A1,C32A6) SOHC
1991-98
15
(J37A1,J37A2,J37A4,J37A-
1999-08
16
5) SOHC
2001-06
17
4 Cyl.
Engine
Engine
Year
Line
2.5 (G25A1,G25A4) SOHC
1992-98
10
5 Cyl.
6 Cyl.
3.5
Year
Line
2005-14
18
(J35A8,J35Z6,J35Z2,J35Y-
2.3 (F23A1) SOHC
1998-99
8
3.2 (J32A1, J32A2, J32A3)
2.4
2004-15
9
SOHC
3.5 (J35A3,J35A5) SOHC
(K24A2,K24Z3,K24Z3-42,-
Engine
6 Cyl. (Continued)
K24Z7) DOHC
Line
No.
Part Title
Part No
Description
1
1.6 (D16A1) DOHC ENG - 1986-89 - 4 Cyl. - 75 MM Bore (INTEGRA LS,RS,LS SPECIAL-1590CC)
2
1.6 (D16Y8) DOHC ENG - 1997-00 - 4 Cyl. (EL 1590CC)
3
4
5
6
7
8
Belt Tensioner
Belt
BT326
B-0224
Belt
Belt Tensioner
B-0227
BT5262
Belt
Belt Tensioner
B-0312
BT5451
104 TEETH
INCLUDES SPRING
1.8 (B18C1,B18C5) DOHC ENG - 1994-01 - 4 Cyl. - 81 MM Bore (B18C1 INTEGRA GS-R 1994-01)
(B18C5 INTEGRA TYPE R 1997-01 1797CC) VTEC
Belt
Belt Tensioner
B-0247
BT5262
126 TEETH
PULLEY
1.8 (B18A1,B1) DOHC ENG - 1990-01 - 4 Cyl. - 81.0 MM Bore (B18A1,B1 INTEGRA
GS,LS,RS,SPECIAL EDITION)
Belt
Belt Tensioner
B-0184
BT5262
125 TEETH
INTERFERENCE ENGINE APPLICATION
2.2 (F22B1) SOHC ENG - 1997 - 4 Cyl. - 85 MM Bore (CL-2156CC)
Belt
Belt Tensioner
B-0186
B-0244
BT203
70 TEETH (BAL. SHAFT) INTERFERENCE ENG. APPLICATION
112 TEETH (CAMSHAFT) INTERFERENCE ENG. APPLICATION
CAMSHAFT
2.3 (F23A1) SOHC ENG - 1998-99 - 4 Cyl. - 86 MM Bore (CL-2254CC) VTEC
Belt
Belt Tensioner
B-0186
BT203
70 TEETH BALANCE SHAFT; INTERFERENCE ENG.
APPLICATION
112 TEETH CAMSHAFT BELT; INTERFERENCE ENG.
APPLICATION
TIMING BELT TENSIONER
2.4 (K24A2,K24Z3,K24Z3-42,K24Z7) DOHC ENG - 2004-15 - 4 Cyl. - 3.42 Bore (ILX, TSX - 2354CC)
HONDA VTEC,i-VTEC
Chain
711F
712F
Crank Sprocket
Balance Shaft Sprocket
Chain Tensioner
S937
S939
BT5569
BT5573
BT5574
Continued on Next Page
12
124 TEETH
1.7 (D17A2) SOHC ENG - 2001-05 - 4 Cyl. - 75.0 MM Bore (EL 1668CC) VTEC
B-0244
9
104 TEETH INTERFERENCE ENGINE
1.7 (B17A1) DOHC ENG - 1992-93 - 4 Cyl. - 81 MM Bore (INTEGRA GS-R-1678CC) VTEC
2004-2008 176 LINKS TSX; TIMING CHAIN
2004-2008 62 LINKS TSX; OIL PUMP AND BALANCE SHAFT
CHAIN
2004-2008 23 / 34 TEETH TSX
2004-2008 17 TEETH TSX
2004-2008 TSX; BALANCE SHAFT CHAIN TENSIONER; LOWER
2004-2008 TSX; TIMING CHAIN TENSIONER ARM
2004-2008 TSX; TIMING CHAIN TENSIONER; RIGHT HAND
ACURA (Continued)
Line
No.
9
Part Title
Part No
2.4 (K24A2,K24Z3,K24Z3-42,K24Z7) DOHC ENG - 2004-15 - 4 Cyl. - 3.42 Bore (ILX, TSX - 2354CC)
HONDA VTEC,i-VTEC (Continued)
BG5570
Chain Guide
10
11
12
13
14
15
16
BG5571
BG5572
B-0211
Belt
19
113 TEETH
2.5 (C25A1) SOHC ENG - 1986-87 - V6 - 84 MM Bore (LEGEND-2494CC)
B-0129
BT198
Belt
Belt Tensioner
192 TEETH
2.7 (C27A1) SOHC ENG - 1987-90 - V6 - 87 MM Bore (LEGEND L,LS-2675CC)
B-0129
BT198
Belt
Belt Tensioner
192 TEETH
3.0 (J30A1) SOHC ENG - 1997-99 - V6 - 86 MM Bore (CL-2997CC) VTEC
B-0286
Belt
197 TEETH
3.2 (6VD1) SOHC ENG - 1996-97 - V6 - 93.4 MM Bore (SLX-3165CC)
B-0221
Belt
223 TEETH
3.2 (C32A1,C32A6) SOHC ENG - 1991-98 - V6 - 88.9 Bore (C32A1 LEGEND GS,L,LS,SE 1991-95)
(C32A6 TL 1996-98 - 3206CC)
B-0193
BT5268
Belt
Idler
196 TEETH
ADJUSTER
3.2 (J32A1, J32A2, J32A3) SOHC ENG - 1999-08 - V6 - 88.9 MM Bore (J32A1 CL,TL 1999-03) (J32A2
CL,TL 2001-03) (J32A3 TL 2004-08-3210CC) VTEC
B-0286
B-0329
1999-2003 197 TEETH
2004-2008 197 TEETH INTERFERENCE ENGINE APPLICATION
3.5 (J35A3,J35A5) SOHC ENG - 2001-06 - 4 Cyl. - 90 MM Bore (J35A3 MDX 2001-02) (J35A5 MDX
2003-06 VTEC-3471CC)
B-0286
B-0329
Belt
18
2004-2008 TSX; BALANCE SHAFT CHAIN GUIDE; LOWER LEFT
HAND
2004-2008 TSX; TIMING CHAIN GUIDE; UPPER
2004-2008 TSX; TIMING CHAIN GUIDE; UPPER LEFT HAND
2.5 (G25A1,G25A4) SOHC ENG - 1992-98 - 5 Cyl. - 85 MM Bore (G25A1 VIGOR LS,GS 1992-94)
(G25A4 TL 1995-98-2451CC)
Belt
17
Description
2001-2002 197 TEETH
2003-2006 197 TEETH
3.5 (J35A8,J35Z6,J35Z2,J35Y4) SOHC ENG - 2005-14 - 6 Cyl. - 89 MM Bore
(MDX,RL,TL,TSX,RDX,RLX - 3471CC) HONDA VTEC
B-0329
Belt
2005-2012 197 TEETH
3.5 (C35A1) SOHC ENG - 1996-04 - V6 - 90 MM Bore (RL-3575CC) VTEC
B-0279
B-0280
Belt
197 TEETH CAMSHAFT
69 TEETH BAL. SHAFT
20
3.5 (6VE1) DOHC ENG - 1998-99 - V6 - 93.4 MM Bore (SLX-3494CC)
21
3.7 (J37A1,J37A2,J37A4,J37A5) SOHC ENG - 2007-14 - 6 Cyl. - 90.00MM Bore (MDX,ZDX,RL,TL 3664CC) HONDA VTEC (INCLUDES TRUCKS)
B-0303
Belt
B-0329
Belt
191 TEETH
2007-2012 197 TEETH
ALFA ROMEO
4 Cyl.
Engine
1961CC DOHC
Year
Line
1970-94
1
Engine
Year
Line
Engine
Year
Line
13
ALFA ROMEO (Continued)
Line
No.
1
Part Title
Part No
Description
1961CC DOHC ENG - 1970-94 - 4 Cyl. - 84 MM Bore
3DR48
Chain
48 LINKS LOWER
AMERICAN MOTORS
Year
Line
40 SERIES
1946-58
1
60 SERIES
1946-56
2
6 Cyl.
Engine
4 Cyl.
121
1977-79
3
150 (2.5)
1983-87
4
151
1980-83
5
6 Cyl.
196 OHV, L HEAD
Line
No.
1958-65
Engine
Line
199
1965-70
7
232
1964-79
8
8 Cyl.
250
258
287
2
60 SERIES ENG - 1946-56 - 6 Cyl. -
4
5
6
Chain
Belt
Crank Sprocket
Belt Tensioner
339
10
Year
Line
290
1966-69
12
304
1970-79
13
327 ENG
1958-66
14
343
1967-69
15
360
1970-78
16
390
1968-70
17
401
1971-76
18
11
Description
60 LINKS
60 LINKS
B-017
S499
BT148
121 TEETH
22 TEETH
150 (2.5) ENG - 1983-87 - 4 Cyl. - 3.88 Bore EAGLE (AMC ENGINE)
Timing Kit
3-3SR64S
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
3-3SR64
3SR64
S608
S607
BT167
BG337
1983-1984 KIT INCLUDES [3SR64], [S607], [S608], [BT167],
[BG337]
INCLUDES [3SR64], [S608] & [S607]
64 LINKS
48 TEETH
24 TEETH
1983-1984 DAMPER
151 ENG - 1980-83 - 4 Cyl. - 4.000 Bore (GM ENGINE)
Gear Set
Cam Gear
Crank Gear
Cam Thrust Plate Spacer
2542S
2542
2537
MG221
FIBER INCLUDES [2542] & [2537]
54 TEETH FIBER
27 TEETH
196 OHV, L HEAD ENG - 1958-65 - 6 Cyl. - 3.13 Bore (1958-65 CAST IRON ENG) (1961-65
ALUMINUM ENGINE) (1958-65 AMERICAN) (1961-65 CLASSIC) (1961-62 CUSTOM) (1961-62
DELUXE) (1958-60 RAMBLER) (1961-62 SUPER SIX)
Crank Sprocket
14
339
9
Engine
8 Cyl. (Continued)
121 ENG - 1977-79 - 4 Cyl. - 3.406 Bore
Chain
7
1963-66
Part No
40 SERIES ENG - 1946-58 - 6 Cyl. -
3
1971-88
8 Cyl.
1
Chain
1958-61
6 Cyl.
6
Part Title
Year
6 Cyl. (Continued)
339
357
365
S329
60 LINKS 1" WIDE; USE W/CAST IRON ENGINE ONLY
1961-1964 56 LINKS 7/8" WIDE USE W/ ALUMINUM ENG ONLY
60 LINKS 3/4" WIDE. USE W/CAST IRON ENGINE ONLY
1961-1964 20 TEETH USE W/ALUMINUM ENGINE; FOR .75 INCH
WIDE CHAIN
199 ENG - 1965-70 - 6 Cyl. - 3 3/4 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-494S
494
S388
S355
INCLUDES [494], [S388] & [S355]
48 LINKS
36 TEETH
18 TEETH
AMERICAN MOTORS (Continued)
Line
No.
Part Title
Part No
Description
8
232 ENG - 1964-79 - 6 Cyl. - 3.75 Bore
9
250 ENG - 1958-61 - 8 Cyl. - 3 1/2 Bore (REBEL 1958-61) (CLASSIC 1961)
10
11
12
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain
Crank Sprocket
3-494S
494
S388
S355
349
S281
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-494S
494
S388
S355
Chain
Crank Sprocket
349
S281
62 LINKS
23 TEETH
290 ENG - 1966-69 - 8 Cyl. - 3 3/4 Bore
3pc Set
Cam Sprocket
Crank Sprocket
3-349S
349
374
S512
S281
S515
INCLUDES [349], [S412] & [S281]; INCLUDES 7/8" WIDE CHAIN;
USE AS A SET ONLY
INCLUDES [374], [S512] & [S515]; INCLUDES 3/4" WIDE CHAIN;
USE AS A SET ONLY
62 LINKS 7/8" WIDE
62 LINKS 3/4" WIDE
46 TEETH USE W/3/4" WIDE CHAIN
23 TEETH USE W/7/8" WIDE CHAIN
23 TEETH USE W/3/4" WIDE CHAIN
304 ENG - 1970-79 - 8 Cyl. - 3 3/4 Bore
3pc Set
3-349S
3-374SA
Chain
Cam Sprocket
Crank Sprocket
15
INCLUDES [494], [S388] & [S355]
48 LINKS
36 TEETH
18 TEETH
287 ENG - 1963-66 - 8 Cyl. - 3 3/4 Bore
Chain
14
62 LINKS
23 TEETH
258 ENG - 1971-88 - 6 Cyl. - 3.75 Bore
3-374SA
13
INCLUDES [494], [S388] & [S355]
48 LINKS
36 TEETH
18 TEETH
349
374
S512
S281
S445
S515
INCLUDES [349], [S412] & [S281]; INCLUDES 7/8" WIDE CHAIN;
USE AS A SET ONLY
INCLUDES [374], [S512] & [S515]; INCLUDES 3/4" WIDE CHAIN;
USE AS A SET ONLY
62 LINKS 7/8" WIDE EXC. POLICE & FLEET
62 LINKS 3/4" WIDE EXC. POLICE & FLEET
46 TEETH USE W/3/4" WIDE CHAIN EXC. POLICE & FLEET
23 TEETH USE W/7/8" WIDE CHAIN EXC. POLICE & FLEET
23 TEETH POLICE & FLEET
23 TEETH USE W/3/4" WIDE CHAIN EXC. POLICE & FLEET
327 ENG - 1958-66 - 8 Cyl. - 4.000 Bore (AMBASSADOR 1958-66) (CLASSIC 1965-66) (MARLIN
1965-66) (REBEL 1966)
Chain
Crank Sprocket
349
S281
62 LINKS
23 TEETH
343 ENG - 1967-69 - 8 Cyl. - 4.080 Bore
3pc Set
3-349S
3-374SA
Chain
Cam Sprocket
Crank Sprocket
349
374
S512
S281
S515
INCLUDES [349], [S412] & [S281]; INCLUDES 7/8" WIDE CHAIN;
USE AS A SET ONLY
INCLUDES [374], [S512] & [S515]; INCLUDES 3/4" WIDE CHAIN;
USE AS A SET ONLY
62 LINKS 7/8" WIDE
62 LINKS 3/4" WIDE
46 TEETH USE W/3/4" WIDE CHAIN
23 TEETH USE W/7/8" WIDE CHAIN
23 TEETH USE W/3/4" WIDE CHAIN
15
AMERICAN MOTORS (Continued)
Line
No.
16
Part Title
Part No
Description
360 ENG - 1970-78 - 8 Cyl. - 4.080 Bore
3-349S
3pc Set
INCLUDES [349], [S412] & [S281]; INCLUDES 7/8" WIDE CHAIN;
USE AS A SET ONLY
INCLUDES [374], [S512] & [S515]; INCLUDES 3/4" WIDE CHAIN;
USE AS A SET ONLY
62 LINKS 7/8" WIDE EXC. POLICE & FLEET
62 LINKS 3/4" WIDE EXC. POLICE & FLEET
46 TEETH USE W/3/4" WIDE CHAIN EXC. POLICE & FLEET
23 TEETH USE W/7/8" WIDE CHAIN EXC. POLICE & FLEET
23 TEETH POLICE & FLEET
23 TEETH USE W/3/4" WIDE CHAIN EXC. POLICE & FLEET
3-374SA
349
374
S512
S281
S445
S515
Chain
Cam Sprocket
Crank Sprocket
17
390 ENG - 1968-70 - 8 Cyl. - 4.165 Bore
3-349S
3pc Set
INCLUDES [349], [S412] & [S281]; INCLUDES 7/8" WIDE CHAIN;
USE AS A SET ONLY
INCLUDES [374], [S512] & [S515]; INCLUDES 3/4" WIDE CHAIN;
USE AS A SET ONLY
62 LINKS 7/8" WIDE
62 LINKS 3/4" WIDE
46 TEETH USE W/3/4" WIDE CHAIN
23 TEETH USE W/7/8" WIDE CHAIN
23 TEETH USE W/3/4" WIDE CHAIN
3-374SA
349
374
S512
S281
S515
Chain
Cam Sprocket
Crank Sprocket
18
401 ENG - 1971-76 - 8 Cyl. - 4.165 Bore
3-349S
3pc Set
3-374SA
349
374
S512
S281
S445
S515
Chain
Cam Sprocket
Crank Sprocket
INCLUDES [349], [S412] & [S281]; INCLUDES 7/8" WIDE CHAIN;
USE AS A SET ONLY
INCLUDES [374], [S512] & [S515]; INCLUDES 3/4" WIDE CHAIN;
USE AS A SET ONLY
62 LINKS 7/8" WIDE EXC. POLICE & FLEET
62 LINKS 3/4" WIDE EXC. POLICE & FLEET
46 TEETH USE W/3/4" WIDE CHAIN EXC. POLICE & FLEET
23 TEETH USE W/7/8" WIDE CHAIN EXC. POLICE & FLEET
23 TEETH POLICE & FLEET
23 TEETH USE W/3/4" WIDE CHAIN EXC. POLICE & FLEET
AUDI
Year
Line
1.5 (1471CC) OHC
1973-74
1
2.2 (2144CC) SOHC
1983-85
11
1.6 (1588CC) OHC
1975-80
2
2.2 (2144CC) SOHC
1978-85
12
1.6 (1588CC) OHC
1982-83
3
2.2 (2226CC) SOHC
1984-91
13
1.7 (1715CC) OHC
1981-83
4
2.2 (2226CC) DOHC
1991
14
1.8 (1760CC) OHV
1970-71
5
2.3 (2309CC) SOHC
1987-92
1.8 (1780CC) OHC
1984-87
6
2.3 (2309CC) DOHC
1990-91
1.8 (1781CC)
1997-06
7
1.9 (1871CC) OHV
1972-77
8
6 Cyl.
2.0 (1983CC) SOHC
1988-90
2.0 (1984CC) DOHC
2005-11
4 Cyl.
Line
No.
1
16
Engine
Part Title
5 Cyl.
Engine
Year
Line
Year
Line
2002-06
20
3.6 (3562CC) DOHC
1990-91
21
3.7 (3679CC) DOHC
1997-99
22
15
4.2 (4172CC) DOHC
1992-94
23
16
4.2 (4172CC) DOHC
2000-06
24
4.2 (4172CC) DOHC
2007-08
25
2.7 (2671CC) DOHC
2000-05
9
2.8 (2771CC) SOHC
1992-98
18
10
2.8 (2771CC) DOHC
1997-01
19
Part No
Engine
6 Cyl. (Continued)
3.0 (2976CC) DOHC
8 Cyl.
17
Description
1.5 (1471CC) OHC ENG - 1973-74 - 4 Cyl. - 76.5 MM Bore (FOX)(ENG. CODE XV,XW,XY,XZ,ZD,ZE)
Belt
Cam Sprocket
Belt Tensioner
B-017
S658
BT148
121 TEETH
44 TEETH
AUDI (Continued)
Line
No.
Part Title
Part No
Description
2
1.6 (1588CC) OHC ENG - 1975-80 - 4 Cyl. - 79.5 MM Bore (FOX,4000) (ENG. CODE YG,YH,YK)
3
1.6 (1588CC) OHC ENG - 1982-83 - 4 Cyl. - 76.5 MM Bore (4000)(DIESEL ENG. CODE CR,CY,JK)
4
5
6
7
Belt
Cam Sprocket
Belt Tensioner
Belt
Crank Sprocket
Belt Tensioner
B-017
S658
BT148
B-043
S663
BT89
121 TEETH
44 TEETH
135 TEETH
1983 22 TEETH
1.7 (1715CC) OHC ENG - 1981-83 - 4 Cyl. - 79.5 MM Bore (4000) (ENG. CODE WT)
Belt
Cam Sprocket
Belt Tensioner
B-017
S658
BT148
121 TEETH
1983 44 TEETH
1.8 (1760CC) OHV ENG - 1970-72 - 4 Cyl. - 81.5 MM Bore (100,100LS)(ENG. CODE ZT,ZY)
Chain
3DR54
54 LINKS
1.8 (1780CC) OHC ENG - 1984-87 - 4 Cyl. - 81 MM Bore (4000) (ENG. CODE JN,MG)
Belt
Cam Sprocket
Belt Tensioner
B-017
S658
BT148
121 TEETH
44 TEETH
1.8 (1781CC) DOHC ENG - 1997-06 - 4 Cyl. - 81 MM Bore (TT,TT QUATTRO,A4, A4 QUATTRO)
(ENG. CODE AEB,AMB,AMU,ATC,ATW,AWM,AWP,BEA) (US & CANADA ONLY)
Belt
B-0306
2000-2006 150 TEETH (INTERFERENCE ENG APPLICATION) TT,
TT QUATTRO W/ENG CODES ATC, AWP
8
1.9 (1871CC) OHV ENG - 1972-77 - 4 Cyl. - 84 MM Bore (100 SERIES)
9
2.0 (1983CC) SOHC ENG - 1988-90 - 4 Cyl. - 84.1 MM Bore (MODEL 80)(ENG. CODE 3A)
10
11
12
13
14
15
Chain
Belt
Cam Sprocket
Belt Tensioner
3DR54
B-017
S658
BT148
54 LINKS
121 TEETH
44 TEETH
2.0 (1984CC) DOHC ENG - 2005-11 - 4 Cyl. - 82.6 MM Bore (A3,A4, A4 QUATTRO, TT, TT QUATTRO)
(BPG,BPY,BWT,CAEB,CBFA,CCTA,CDMA,CESA,CETA)
Belt
B-0334
2005-2008 148 TEETH
2.2 (2144CC) SOHC ENG - 1983-85 - 5 Cyl. - 81 MM Bore (QUATTRO)(WX) TURBO
Belt
Cam Sprocket
Crank Sprocket
B-0127
S658
S581
120 TEETH
44 TEETH
22 TEETH
2.2 (2144CC) SOHC ENG - 1978-85 - 5 Cyl. - 79.5 MM Bore (4000,5000,COUPE) (KH,WD,WE,WK,
WU)
Crank Sprocket
S581
22 TEETH
2.2 (2226CC) SOHC ENG - 1984-91 - 5 Cyl. - 82.5 MM Bore (200,200 QUATTRO,4000
QUATTRO,5000,5000 QUATTRO,COUPE) (JT,KX,KZ,MC) INCLUDES TURBOCHARGED
Belt
Cam Sprocket
Crank Sprocket
B-0127
S658
S581
1984-1988 120 TEETH
1984-1988 44 TEETH
1986-1988 22 TEETH
2.2 (2226CC) DOHC ENG - 1991 - 5 Cyl. - 81 MM Bore (200 QUATTRO) (3B)
Chain
3SR44
44 LINKS OIL PUMP CHAIN
2.3 (2309CC) SOHC ENG - 1987-92 - 5 Cyl. - 82.5 MM Bore (5000,5000 QUATTRO) (80,80
QUATTRO) (90,90 QUATTRO) (100,100 QUATTRO) (QUATTRO COUPE) (NF,NG)
Belt
Cam Sprocket
B-0127
B-0170
S658
1987-1988 120 TEETH
1989-1992 142 TEETH
44 TEETH
Continued on Next Page
17
AUDI (Continued)
Line
No.
15
16
17
18
19
20
21
22
23
24
25
Part Title
Part No
Description
2.3 (2309CC) SOHC ENG - 1987-92 - 5 Cyl. - 82.5 MM Bore (5000,5000 QUATTRO) (80,80
QUATTRO) (90,90 QUATTRO) (100,100 QUATTRO) (QUATTRO COUPE) (NF,NG) (Continued)
S581
Crank Sprocket
22 TEETH
2.3 (2309CC) DOHC ENG - 1990-91 - 5 Cyl. - 82.5 MM Bore (90 QUATTRO & QUATTRO COUPE) (7A)
3SR44
Chain
44 LINKS CAM TO CAM
2.7 (2671CC) DOHC ENG - 2000-05 - 6 Cyl. - 81 MM Bore (A6 QUATTRO,ALL ROAD
QUATTRO,CABRIOLET,S4) (APB,BEL)
B-0297
Belt
253 TEETH QUATTRO S4, ALLROAD QUATTRO TURBO
2.8 (2771CC) SOHC ENG - 1992-98 - V6 - 82.5 MM Bore (90,90 QUATTRO,100,100 QUATTRO,A4,A6,
CABRIOLET)(AAH,AFC)
B-0218
Belt
239 TEETH 90,90 QUATTRO,100,100 QUATTRO,CABRIOLET
2.8 (2771CC) DOHC ENG - 1997-01 - 6 Cyl. - 82.5 MM Bore (A4,A4 QUATTRO,A6,A6 QUATTRO)
B-0297
Belt
1998-2000 253 TEETH
3.0 (2976CC) DOHC ENG - 2002-06 - 6 Cyl. - 82.6 MM Bore (A4 & A6 QUATTRO, QUATTRO) (AVK,
BGN)
B-0330
Belt
281 TEETH INTERFERENCE ENG APPLICATION
3.6 (3562CC) DOHC ENG - 1990-91 - V8 - 81 MM Bore (V8 QUATTRO) (PT)
3SR44
Chain
44 LINKS OIL PUMP CHAIN
3.7 (3697CC) DOHC ENG - 1997-99 - V8 - 84.5 MM Bore (A8,A8 QUATTRO) (AEW)
3SR44
Chain
44 LINKS OIL PUMP CHAIN
4.2 (4172CC) DOHC ENG - 1992-94 - V8 - 84.5 MM Bore (V8 QUATTRO) 32V ENGINE ABH
3SR44
Chain
44 LINKS OIL PUMP CHAIN
4.2 (4172CC) DOHC ENG - 2000-06 - 8 Cyl. - 84.5 MM Bore (A6 QUATTRO, A8 QUATTRO,
ALLROADS QUATTRO, RS6, S6, S8) 40V ENGINE TURBO, NON-TURBO
B-0297
Belt
2000 253 TEETH A6, A8 QUATTRO
4.2 (4172CC) DOHC ENG - 2007-08 - 8 Cyl. - 84.5 MM Bore (RS4, RS4 CABRIOLET) 32V ENGINE
BNS
3SR44
Chain
44 LINKS OIL PUMP
BMW
Year
Line
1.6 (1573CC) OHC
1964-71
1
1.8 (1766CC) OHC
1980-85
2
1.8 (1773CC) SOHC
1963-68
2.0 (1990CC) OHC
1966-79
4 Cyl.
Engine
Line
No.
Part Title
Year
Line
2.5 (2494CC) OHC
1987-06
5
2.5 (2495CC) OHC
1969-71
6
3
2.7 (2693CC) OHC
1982-88
7
4
2.8 (2788CC) OHC
1979-81
8
6 Cyl.
Engine
Part No
Engine
6 Cyl. (Continued)
1975-78
9
3.5 (3430CC) SOHC
1985-93
10
Description
1.6 (1573CC) OHC ENG - 1964-71 - 4 Cyl. - 84 MM Bore (1600, 1600-2, 1600TI)
2
1.8 (1766CC) OHC ENG - 1980-85 - 4 Cyl. - 89 MM Bore (318I & 320I)
3
18
Chain
Cam Sprocket
3DR94
3SR44
172
3SR94
S656
1969-1971 94 LINKS CAMSHAFT
1964-1969 44 LINKS OIL PUMP
46 LINKS OIL PUMP
94 LINKS CAMSHAFT
36 TEETH
1.8 (1773CC) SOHC ENG - 1963-68 - 4 Cyl. - 84 MM Bore (1800 1963-68,1800TI 1964-67)
Chain
3DR94
3SR44
94 LINKS CAMSHAFT
44 LINKS OIL PUMP
Line
3.0 (2985CC) OHC
1
Chain
Year
BMW (Continued)
Line
No.
4
Part Title
Part No
Description
2.0 (1990CC) OHC ENG - 1966-79 - 4 Cyl. - 89 MM Bore (2000,2000CA,2000CS,2000TI,2002,2002TII
& 320I)
Chain
172
3DR94
3SR44
1968-1979 46 LINKS OIL PUMP
94 LINKS CAMSHAFT
1966-1968 44 LINKS OIL PUMP
5
2.5 (2494CC) OHC ENG - 1987-06 - 6 Cyl. - 84 MM Bore (323, 325, 525, Z3, Z4)
6
2.5 (2495CC) OHC ENG - 1969-71 - 6 Cyl. - 86 MM Bore (2500)
Belt
Chain
B-0131
172
3DR94
1987-1994 127 TEETH
46 LINKS OIL PUMP
94 LINKS CAMSHAFT
7
2.7 (2693CC) OHC ENG - 1982-88 - 6 Cyl. - 84 MM Bore (325,325E,325EA,528E)
8
2.8 (2788CC) OHC ENG - 1969-81 - 6 Cyl. - 86 MM Bore (2800 & 2800CS,528I)
9
3.0 (2985CC) OHC ENG - 1975-78 - 6 Cyl. - 89 MM Bore (BAVARIA,630CS,3.0S,3.OSI & 530I)
10
Belt
Chain
Chain
B-0106
B-0131
172
3DR94
172
3DR94
128 TEETH
127 TEETH
46 LINKS OIL PUMP
94 LINKS CAMSHAFT
46 LINKS OIL PUMP
94 LINKS CAMSHAFT
3.5 (3430CC) SOHC ENG - 1985-93 - 6 Cyl. - 92 MM Bore (535I,635I,735I,L6,L7)
Chain
Cam Sprocket
Crank Sprocket
Oil Pump Sprocket
172
3SR94
S704
S703
S705
46 LINKS OIL PUMP CHAIN
94 LINKS CAMSHAFT CHAIN
36 TEETH
18 TEETH
27 TEETH
19
BUICK
Year
Line
1.8-0 (112) SOHC
1982-86
1
1.8-J (112) OHC
1984-86
2
2.0-1 (122) OHV
1987-89
4 Cyl.
Engine
Engine
Year
Line
3.3-N (204)
1989-93
30
3.4-E (207)
2002-05
31
3
3.5-L (213) OHV
2005-07
32
8 Cyl.
1961-63
33
3.6-3,7,D,V (217) DOHC
2004-14
34
6 Cyl. (Continued)
2.0-B (122) OHV
1983-84
4
2.0-P (122) OHV
1983-86
5
2.0-K (122) SOHC
1987-88
6
2.0-M (122) SOHC
1987
7
2.2-4 (134) OHV
1993-96
8
225
1964-67
2.3-3 (138) SOHC
1992-94
9
231-2
2.3-D (138) DOHC
1995
10
2.3-D (138) DOHC
1988-91
11
Year
Line
260
1975-76
56
4.3-S (265)
1980-81
57
267-J
1981-82
58
8 Cyl.
Engine
4.6-S,Y,9 (281) DOHC
2006-11
59
300
1964-67
60
301-W
1979-80
61
301-Y
1977-79
62
35
5.0-E (305)
1991
63
1978-79
36
5.0-G,H,U (305)
1977-87
64
231-3
1978-82
37
5.0-Y (307)
1980-90
65
231-8
1983
38
322
1953-56
66
215
6 Cyl.
2.4-T (146) DOHC
1996-98
12
231-9
1984-85
39
5.3-C,M,P (323,325) OHV
2004-09
67
2.4-C,K,R (145) DOHC
2010-13
13
231-A
1977-87
40
340
1966-67
68
2.5-5 (151) OHV
1980-83
14
231-C
1975-77
41
350
1968-71
69
2.5-R (151) OHV
1982-92
15
350 H,J,K,X
1972-80
70
2.5-U (151) OHV
1985-91
16
350-L
1977-79
71
350-R
1977-80
72
43
5.7 (350N)
1980-85
73
74
6 Cyl.
2.8-7 (173) OHV
231-G
1978
6 Cyl.
1980
17
2.8-W (173) OHV
1985
18
3.8-2 (231) OHV
2005-09
44
5.7-7 (350)
1992-93
2.8-W (173) OHV
1987-89
19
3.8-3 (231)
1984-88
45
5.7-P (350)
1994-96
75
2.8-X (173) OHV
1981-86
20
3.8-7 (231)
1986-87
46
364
1957-66
76
2.8-Z (173) OHV
1982-84
21
3.8-B (231)
1986
47
400
1967-69
77
3.0-E (181) OHV
1982-85
22
3.8-C (231)
1988-91
48
401
1957-66
78
3.0-L (181) OHV
1985-88
23
3.8-K (231)
1995-05
49
403
1977-79
79
3.0-G (182) DOHC
2010
24
3.8-L (231)
1990-95
50
425
1963-66
80
3.1-J (189) OHV
2000-05
25
3.9-1,W (237) OHV
2006-07
51
430
1967-69
81
3.1-M (189) OHV
1994-99
26
3.9-1,M (237) OHV
2009-11
52
455
1970-76
82
3.1-T (189) OHV
1989-93
27
250
1968-75
53
196
1978-79
28
4.1-4 (252)
1980-84
54
198
1962-63
29
4.2-S (256) DOHC
2004-07
55
Line
No.
Part Title
3.8-1 (231)
1991-05
42
Part No
Description
1
1.8-0 (112) SOHC ENG - 1982-86 - 4 Cyl. - 84.8 MM Bore (SKYHAWK) (T.B.I.) (OPEL ENG)
2
1.8-J (112) OHC ENG - 1984-86 - 4 Cyl. - 85 MM Bore (PONTIAC M.F.I. TURBO) (BRAZILIAN ENG)
3
4
5
20
Belt
Belt
B-081
B-081
111 TEETH
111 TEETH
2.0-1 (122) OHV ENG - 1987-89 - 4 Cyl. - 3.39 Bore (SKYHAWK) (CHEVROLET ENG)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-370S
395
S558
S549
BT5115
INCLUDES [395], [S558], [S549] & [MPC-393]
58 LINKS
40 TEETH
20 TEETH
2.0-B (122) OHV ENG - 1983-84 - 4 Cyl. - 3.503 Bore (SKYHAWK) (CHEVROLET ENG)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-370S
395
S558
S549
BT5115
INCLUDES [395], [S558], [S549] & [MPC-393]
58 LINKS
40 TEETH
20 TEETH
2.0-P (122) OHV ENG - 1983-86 - 4 Cyl. - 3.39 Bore (SKYHAWK) (CHEVROLET ENG)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-370S
395
S558
S549
BT5115
INCLUDES [395], [S558], [S549] & [MPC-393]
58 LINKS
40 TEETH
20 TEETH
BUICK (Continued)
Line
No.
Part Title
Part No
Description
6
2.0-K (122) SOHC ENG - 1987-88 - 4 Cyl. - 3.39 Bore (SKYHAWK)(OPEL ENG)
7
2.0-M (122) SOHC ENG - 1987 - 4 Cyl. - 3.39 Bore (M.F.I. TURBO) (OPEL ENG)
8
9
10
Belt
Belt
B-081
111 TEETH
111 TEETH
2.2-4 (134) OHV ENG - 1993-96 - 4 Cyl. - 3.500 Bore (M.F.I.)
3pc Set
3-370S
3-370SA
3-395S
Chain
Cam Thrust Plate Spacer
Cam Sprocket
395
MG221
S558
S774
S549
BT5115
Crank Sprocket
Chain Tensioner
1993 INCLUDES [395], [S558], [S549] & [MPC-393]
1994-1996 INCLUDES [395], [S774], [S549] & [MPC-393]
1994-1996 INCLUDES [370], [S774], [S549], [BT5115] & [MPC-393]
RETRO FIT FINE FINISH CHAIN SET, CHECK FOR POSSIBLE
OILING PROBLEM WHEN INSTALLING SET.
58 LINKS
1993 40 TEETH
1994-1996 40 TEETH
20 TEETH
FOR USE WITH BOTH 370 AND 395 CHAINS
2.3-3 (138) SOHC ENG - 1992-94 - 4 Cyl. - 3.62 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Guide
3-384S
384
S734
S747
BG305
BG307
INCLUDES [384], [S734] & [S747]
124 LINKS
38 TEETH
19 TEETH
LEFT HAND
RIGHT HAND
2.3-D (138) DOHC ENG - 1995 - 4 Cyl. - 3.62 Bore (SKYLARK)
Timing Kit
3-383SB
3pc Set
3-383S
3-3DR130
383
383M
3DR130
S692
S734
S653
S747
BG304
BG305
BG306
Chain
Cam Sprocket
Crank Sprocket
Chain Guide
11
B-081
KIT INCLUDES [383], (2) [S734], [S747], [BG304], [BG305] &
[BG306] UPDATED TIMING CHAIN WILL NOT FIT ORIGINAL
WATER PUMP SPROCKET USE GM 24570609 WITH 383 CHAIN.
MELLING DOES NOT FURNISH.
INCLUDES [383], (2) [S734] & [S747] 2ND. DESIGN
INCLUDES [3DR130], (2) [S692] & [S653] 1ST DES.
130 LINKS STANDARD FINISH CHAIN 2ND. DES.
130 LINKS FINE FINISH CHAIN
130 LINKS 1ST DES. ROLLER
38 TEETH 1ST. DES. (2) REQ.
38 TEETH 2ND. DES. (2) REQUIRED
19 TEETH 1ST. DES.
19 TEETH 2ND. DES.
2ND DES. 23MM WIDE- RIGHT HAND
2ND DES. 23MM WIDE- LEFT HAND
2ND DES. 23MM WIDE- UPPER
2.3-D (138) DOHC ENG - 1988-91 - 4 Cyl. - 3.62 Bore (SKYLARK)
Timing Kit
3-383SB
3pc Set
3-383S
3-3DR130
383
383M
3DR130
S692
S734
S653
Chain
Cam Sprocket
Crank Sprocket
KIT INCLUDES [383], (2) [S734], [S747], [BG304], [BG305] &
[BG306] UPDATED TIMING CHAIN WILL NOT FIT ORIGINAL
WATER PUMP SPROCKET USE GM 24570609 WITH 383 CHAIN.
MELLING DOES NOT FURNISH
INCLUDES [383], (2) [S734] & [S747] 2ND DES.
INCLUDES [3DR130], (2) [S692] & [S653] 1ST DES.
130 LINKS STANDARD FINISH CHAIN 2ND DES.
130 LINKS FINE FINISH CHAIN
130 LINKS 1ST DES. ROLLER
38 TEETH 1ST DES. (2) REQ.
38 TEETH 2ND DES. (2) REQ.
19 TEETH 1ST DES.
Continued on Next Page
21
BUICK (Continued)
Line
No.
Part Title
Part No
Description
11
2.3-D (138) DOHC ENG - 1988-91 - 4 Cyl. - 3.62 Bore (SKYLARK) (Continued)
12
2.4-T (146) DOHC ENG - 1996-98 - 4 Cyl. - 3.62 Bore LD9
Crank Sprocket
Chain Tensioner
Chain Guide
S747
BT188
BG304
BG305
BG306
Timing Kit
3-390SA
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-390S
390
S804T
S805
BT355
BT356
BG365
BG366
BG367
BG368
Chain Guide
19 TEETH 2ND DES.
1988-1991 1ST DES.
2ND DES. 23MM WIDE- RIGHT HAND
2ND DES. 23MM WIDE- LEFT HAND
2ND DES. 23MM WIDE- UPPER
1997-1998 KIT INCLUDES [390], (2) [S804T], [S805], [BT355],
[BT356], [BG365], [BG366], [BG367]
INCLUDES [390], (2) [S804T], [S805]
130 LINKS
38 TEETH 2 REQUIRED
19 TEETH
1997-1998 TENSIONER ARM
1997-1998 HYDRAULIC (2ND DESIGN) TENSIONER
RIGHT HAND; CAMSHAFT
LEFT HAND; CAMSHAFT
UPPER; CAMSHAFT
BAL SHAFT
13
2.4-C,K,R (145) DOHC ENG - 2010-13 - 4 Cyl. - 3.46 Bore LACROSSE,REGAL,VERANO (ECOTEC)
14
2.5-5 (151) OHV ENG - 1980-83 - 4 Cyl. - 4.00 Bore (CENTURY, SKYLARK) (PONTIAC ENG)
Chain Guide
Gear Set
Cam Gear
15
Crank Gear
Cam Thrust Plate Spacer
22
2538S
2542S
2524
2542
2537
MG221
2010-2012 CAMSHAFT CHAIN; RIGHT HAND
2010-2012 CAMSHAFT CHAIN; LEFT HAND
2010-2012 BALANCE SHAFT CHAIN; UPPER
ALUM. INCLUDES [2524] & [2537]
FIBER INCLUDES [2542] & [2537]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
2.5-R (151) OHV ENG - 1982-92 - 4 Cyl. - 4.000 Bore (PONTIAC)
3pc Set
Chain
Gear Set
Cam Gear
16
BG5375
BG5381
BG5386
Crank Gear
Cam Thrust Plate Spacer
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-378SA
378
2538S
2542S
2524
2542
2537
MG221
S690
S713
BT220
1991-1992 INCLUDES [378], [S690] & [S713]
1991-1992 56 LINKS
1982-1990 ALUM. INCLUDES [2524] & [2537]
1982-1990 FIBER INCLUDES [2542] & [2537]
1982-1990 54 TEETH ALUMINUM
1982-1990 54 TEETH FIBER
1982-1990 27 TEETH
1991-1992 42 TEETH
1991-1992 21 TEETH
1991-1992
2.5-U (151) OHV ENG - 1985-91 - 4 Cyl. - 4.000 Bore
3pc Set
Chain
Gear Set
Cam Gear
Crank Gear
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-378S
378
2544S
2544
2537
S690
S695
BT143
1990-1991 INCLUDES [378], [S690] & [S695]
1990-1991 56 LINKS
1985-1989 INCLUDES [2544] & [2537]
1985-1989 54 TEETH
1985-1989 27 TEETH
1990-1991 42 TEETH
1990-1991 21 TEETH
1990-1991
Line
No.
BUICK (Continued)
Part Title
Part No
Description
17
2.8-7 (173) OHV ENG - 1980 - V6 - 89 MM Bore (CHEVROLET)
18
2.8-W (173) OHV ENG - 1985 - V6 - 3.50 Bore (SKYLARK)
19
20
21
22
23
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-373S
373
S506
S511
BD59
3-373S
373
S506
S511
BD59
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
2.8-W (173) OHV ENG - 1987-89 - V6 - 3.50 Bore (CENTURY 1987-89) (REGAL 1988-89)(
CHEVROLET ENG)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-372S
385
S620
S619
BD131
INCLUDES [385], [S620] & [S619]
64 LINKS
40 TEETH
20 TEETH
2.8-X (173) OHV ENG - 1981-86 - V6 - 89 MM Bore (CHEVROLET)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-373S
373
S506
S511
BD59
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
2.8-Z (173) OHV ENG - 1982-84 - V6 - 89 MM Bore (CHEVROLET)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-373S
373
S506
S511
BD59
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
3.0-E (181) OHV ENG - 1982-85 - V6 - 3.800 Bore
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-359SB
359
CB100
S610
S323
BD44
BD45
INCLUDES [359], [S610] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
RIGHT HAND
LEFT HAND
3.0-L (181) OHV ENG - 1985-88 - V6 - 3.800 Bore
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
3-359SC
359
CB100
S610
S609
S621
Damper
S621
BD58
INCLUDES [359], [S610] & [S621] 1985 2ND DES. & 1986-88
54 LINKS
W/SPRING
40 TEETH
1985 20 TEETH 1ST DES. SPLINED DRIVE W/32MM THICK
BALANCER HUB
1985 20 TEETH 2ND DES. W/DOUBLE FLATS ON OUTSIDE OF
SPROCKET TO TURN OIL PUMP- 36MM THICK BALANCER HUB
1986-1988 20 TEETH
23
BUICK (Continued)
Line
No.
24
Part Title
Part No
Description
3.0-G (182) DOHC ENG - 2010 - 6 Cyl. - 3.50 Bore ALLURE (CANADA), LACROSSE
Timing Kit
3-753S
Chain
753
754
S921
S930
S932
BT5535
Crank Sprocket
Idler Sprocket
Chain Tensioner
BT5536
BT5537
Chain Guide
BG5530
BG5531
BG5532
BG5533
BG5534
BG5548
INCLUDES [753], (2) [754], [S921], [S930], [S932], [BT5535],
[BT5536], [BT5537], [BG5548], [BG5530], [BG5531], [BG5532],
[BG5533], [BG5534] FOR ENGINES USING SILENT TYPE CHAINS
96 LINKS LOWER; PRIMARY
114 LINKS UPPER; SECONDARY (2) REQUIRED
30 TEETH
22 TEETH INCLUDES MOUNTING BOLT LEFT HAND
22 TEETH INCLUDES MOUNTING BOLT RIGHT HAND
INCLUDES GASKET AND 2 MOUNTING BOLTS SECONDARY
CHAIN; LEFT HAND
INCLUDES GASKET AND 2 MOUNTING BOLTS SECONDARY
CHAIN; RIGHT HAND
INCLUDES MOUNTING GASKET AND 2 MOUNTING BOLTS
PRIMARY CHAIN
INCLUDES (2) MOUNTING BOLTS PRIMARY CHAIN; UPPER
INCLUDES 2 MOUNTING BOLTS SECONDARY CHAIN; LEFT
HAND
INCLUDES 2 MOUNTING BOLTS SECONDARY CHAIN; RIGHT
HAND
PRIMARY CHAIN; RIGHT HAND
PRIMARY CHAIN; LEFT HAND; LOWER
PRIMARY CHAIN; RIGHT HAND; LOWER
25
3.1-J (189) OHV ENG - 2000-05 - V6 - 3.50 Bore (CENTURY)
26
3.1-M (189) OHV ENG - 1994-99 - V6 - 3.50 Bore
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-700SB
3-700S
700
S848
S847
BD600
Timing Kit
3-385SC
3-385SC
3-700SB
3pc Set
3-385S
3-385S
3-700S
Chain
Cam Sprocket
Crank Sprocket
Damper
Continued on Next Page
24
385
385
700
S756
S756
S848
S619
S619
S847
BD336
BD336
KIT INCLUDES [700], [S847], [S848], [BD600]
INCLUDES [700], [S847], [S848]
80 LINKS
50 TEETH
25 TEETH
1994-1998 KIT INCLUDES [385], [S619], [S756], [BD336]
1999 KIT INCLUDES [385], [S619], [S756], [BD336] 1ST DES.
1999 KIT INCLUDES [700], [S847], [S848], [BD600] 2ND DES.
W/79 LINK CHAIN, 50 TOOTH CAM SPROCKET & 25 TOOTH
CRANK SPROCKET
1994-1998 INCLUDES [385], [S756] & [S619]
1999 INCLUDES [385], [S756] & [S619] 1ST DES. W/64 LINK
CHAIN, 40 TOOTH CAM SPROCKET & 20 TOOTH CRANK
SPROCKET
1999 INCLUDES [700], [S847], [S848] 2ND DES. W/79 LINK
CHAIN, 50 TOOTH CAM SPROCKET & 25 TOOTH CRANK
SPROCKET
1994-1998 64 LINKS
1999 64 LINKS 1ST DES.
1999 80 LINKS 2ND DES. W/80 LINKS
1994-1998 40 TEETH
1999 40 TEETH 1ST DES.
1999 50 TEETH 2ND DES.
1994-1998 20 TEETH
1999 20 TEETH 1ST DES.
1999 25 TEETH 2ND DES.
1994-1998
1999 1ST DESIGN
BUICK (Continued)
Line
No.
Part Title
Part No
Description
26
3.1-M (189) OHV ENG - 1994-99 - V6 - 3.50 Bore (Continued)
27
3.1-T (189) OHV ENG - 1989-93 - V6 - 3.503 Bore
28
Damper
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
BD600
3-372S
385
S620
S619
BD131
1999 2ND DESIGN
INCLUDES [385], [S620] & [S619]
64 LINKS
40 TEETH
20 TEETH
196 ENG - 1978-79 - V6 - 3.54 Bore
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-359SB
359
CB100
S610
S323
BD44
BD45
INCLUDES [359], [S610] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
RIGHT HAND W/SPRING
LEFT HAND
29
198 ENG - 1962-63 - V6 - 3.63 Bore (SKYLARK,SPECIAL)
30
3.3-N (204) ENG - 1989-93 - V6 - 3.700 Bore (SKYLARK, CENTURY)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-359S
359
S334
S323
BD44
BD45
3-377S
3-377SA
377
CB300
S726
S621
BD295
BD295
BD58
INCLUDES [359], [S334] & [S323]
54 LINKS
40 TEETH
20 TEETH
RIGHT HAND W/SPRING
LEFT HAND
1989-1990 INCLUDES [377], [S684] & [S691]
1991-1993 INCLUDES [377], [S726] & [S621]
54 LINKS
1989-1990
1991-1993 40 TEETH
20 TEETH
1989-1992 2ND DES. W/COUNTER BORED DAMPER BOLT HOLE
1993
1989-1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE
31
3.4-E (207) ENG - 2002-05 - V6 - 3.62 Bore LA1 ENG (RENDEZVOUS)
32
3.5-L (213) OHV ENG - 2005-07 - 6 Cyl. - 3.70 Bore (RENDEZVOUS, TERRAZA) INCLUDES VANS
33
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-700SB
3-700S
700
S848
S847
BD600
3-700SB
3-700S
700
S848
S847
BD600
KIT INCLUDES [700], [S847], [S848], [BD600]
INCLUDES [700], [S847], [S848]
80 LINKS
50 TEETH
25 TEETH
KIT INCLUDES [700], [S847], [S848], [BD600]
INCLUDES [700], [S847], [S848]
80 LINKS
50 TEETH
25 TEETH
215 ENG - 1961-63 - 8 Cyl. - 3 1/2 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-359S
359
S334
S323
INCLUDES [359], [S334] & [S323]
54 LINKS
40 TEETH
20 TEETH
25
BUICK (Continued)
Line
No.
34
Part Title
Part No
Description
3.6-3,7,D,V (217) DOHC ENG - 2004-14 - 6 Cyl. - 3.70 Bore
(ALLURE,ENCLAVE,LACROSSE,RENDEZVOUS) GAS/FLEX FUEL
Timing Kit
3-1007S
3-753S
Chain
Crank Sprocket
Idler Sprocket
Chain Tensioner
1007
1044
753
754
S1229
S921
S1225
S1227
S930
S932
BT5535
BT5536
BT5537
Chain Guide
BG5530
BG5531
BG5532
BG5533
BG5534
BG5548
2004-2006 KIT INCLUDES [1007], (2) [1044], [S1225], [S1227],
[S1229], [BT5535], [BT5536], [BT5537], [BG5530], [BG5531],
[BG5532], [BG5533], [BG5534], [BG5548] FOR ENGINES USING
ROLLER TYPE SECONDARY (UPPER) CHAINS
2007-2013 INCLUDES [753], (2) [754], [S921], [S930], [S932],
[BT5535], [BT5536], [BT5537], [BG5548], [BG5530], [BG5531],
[BG5532], [BG5533], [BG5534] EXC. 2011-13 LACROSSE; FOR
ENGINES USING SILENT TYPE CHAINS
2004-2006 78 LINKS PRIMARY ROLLER TIMING CHAIN
2004-2006 92 LINKS SECONDARY ROLLER TIMING CHAIN; 2
REQ.
2007-2013 96 LINKS PRIMARY; LOWER
2007-2013 114 LINKS SECONDARY; UPPER; 2 REQUIRED
2004-2006 24 TEETH
2007-2013 30 TEETH
2004-2006 18 / 27 TEETH LEFT HAND
2004-2006 18 / 27 TEETH RIGHT HAND
2007-2013 22 TEETH INCLUDES MOUNTING BOLT LEFT HAND
2007-2013 22 TEETH INCLUDES MOUNTING BOLT RIGHT HAND
2004-2013 INCLUDES GASKET AND 2 MOUNTING BOLTS
TIMING CHAIN TENSIONER; SECONDARY CHAIN; LEFT HAND
UPPER; EXC. 2012-13 LACROSSE
2004-2013 INCLUDES GASKET AND 2 MOUNTING BOLTS
TIMING CHAIN TENSIONER; SECONDARY CHAIN; RIGHT HAND
UPPER; EXC. 2011-13 LACROSSE
2004-2013 INCLUDES MOUNTING GASKET AND 2 MOUNTING
BOLTS TIMING CHAIN TENSIONER; PRIMARY CHAIN; EXC.
2012-13 LACROSSE
2004-2013 INCLUDES (2) MOUNTING BOLTS PRIMARY CHAIN;
UPPER
2004-2013 INCLUDES 2 MOUNTING BOLTS SECONDARY
CHAIN; LEFT HAND
2004-2013 INCLUDES 2 MOUNTING BOLTS SECONDARY
CHAIN; RIGHT HAND
2004-2013 PRIMARY CHAIN; RIGHT HAND
2004-2013 PRIMARY CHAIN; LEFT HAND; LOWER
2004-2013 PRIMARY CHAIN; RIGHT HAND; LOWER; EXC. 201213 LACROSSE
35
225 ENG - 1964-67 - V6 - 3 3/4 Bore
36
231-2 ENG - 1978-79 - V6 - 3.78 Bore (SKYHAWK,CENTURY,REGAL)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
Continued on Next Page
26
3-359S
359
S334
S323
BD44
BD45
3-359SB
359
CB100
S610
S323
BD44
INCLUDES [359], [S334] & [S323]
54 LINKS
40 TEETH
20 TEETH
RIGHT HAND W/SPRING
LEFT HAND
INCLUDES [359], [S610] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
RIGHT HAND W/SPRING
BUICK (Continued)
Line
No.
Part Title
Part No
Description
36
231-2 ENG - 1978-79 - V6 - 3.78 Bore (SKYHAWK,CENTURY,REGAL) (Continued)
37
231-3 ENG - 1978-82 - V6 - 3.800 Bore (231-3) CARB TURBO CHARGED
Damper
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
BD45
3-359SB
359
CB100
S610
S323
BD44
BD45
LEFT HAND
INCLUDES [359], [S610] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
RIGHT HAND; W/SPRING
1978-1981 LEFT HAND
38
231-8 ENG - 1983 - V6 - 3.800 Bore
39
231-9 ENG - 1984-85 - V6 - 3.800 Bore (REGAL & RIVIERA ONLY)
40
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-359SB
359
CB100
S610
S323
BD44
3-359SB
359
CB100
S610
S323
BD44
INCLUDES [359], [S610] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
RIGHT HAND W/SPRING
INCLUDES [359], [S610] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
RIGHT HAND W/SPRING
231-A ENG - 1977-87 - V6 - 3.800 Bore (EVEN FIRE)
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-359SB
359
CB100
S610
S323
BD44
BD45
INCLUDES [359], [S610] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
RIGHT HAND W/SPRING
1977-1981 LEFT HAND
41
231-C ENG - 1975-77 - V6 - 3.78 Bore (ODD FIRE)
42
231-G ENG - 1978 - V6 - 3.800 Bore
43
3.8-1 (231) ENG - 1991-05 - V6 - 3.800 Bore (S.F.I.) SUPERCHARGED
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3pc Set
3-359S
359
CB100
S334
S323
BD44
BD45
3-359SB
359
CB100
S610
S323
BD44
BD45
3-375SA
3-375SA
3-381ASB
3-381ASB
INCLUDES [359], [S334] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
RIGHT HAND W/SPRING
LEFT HAND
INCLUDES [359], [S610] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
RIGHT HAND W/SPRING
LEFT HAND
1991-1994 INCLUDES [375], [S716] & [S729]
1995 INCLUDES [375], [S716] & [S729] 1ST DES.
1995 INCLUDES [381A], [S811] & [S812] 2ND DES.
1996-2005 INCLUDES [381A], [S811] & [S812]
Continued on Next Page
27
BUICK (Continued)
Line
No.
43
Part Title
Part No
Description
3.8-1 (231) ENG - 1991-05 - V6 - 3.800 Bore (S.F.I.) SUPERCHARGED (Continued)
Chain
Cam Sprocket
Crank Sprocket
Damper
375
375
381A
381A
S716
S716
S812
S812
S729
S729
S811
S811
BD295
BD295
BD295
BD344
BD344
BD58
1991-1994 54 LINKS
1995 54 LINKS 1ST DES.
1995 64 LINKS 2ND DES.
1996-2005 64 LINKS
1991-1994 40 TEETH
1995 40 TEETH 1ST DES.
1995 48 TEETH 2ND DES.
1996-2005 48 TEETH
1991-1994 20 TEETH
1995 20 TEETH 1ST DES.
1995 24 TEETH 2ND DES.
1996-2005 24 TEETH
1991-1992 2ND DES. W/COUNTER BORED DAMPER BOLT HOLE
1993-1994
1995 1ST DES. W/.062" WIDE SHOE
1995 2ND DES. W/.081 WIDE SHOE
1996-2005
1991-1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE
44
3.8-2 (231) OHV ENG - 2005-09 - 6 Cyl. - 3.80 Bore (ALLURE, LACROSSE, LUCERNE)
45
3.8-3 (231) ENG - 1984-88 - V6 - 3.800 Bore (CENTURY,ELECTRA,LESABRE,RIVIERA)(FUEL
INJECTED)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-381AS
381A
S810
S811
BD344
3-359SB
3-359SC
359
CB100
S610
S323
S621
BD44
BD58
2005-2008 INCLUDES [381A], [S810], [S811]
64 LINKS
48 TEETH
24 TEETH
1984-1985 INCLUDES [359], [S610] & [S323]
1986-1988 INCLUDES [359], [S610] & [S621]
54 LINKS
W/SPRING
40 TEETH
1984-1985 20 TEETH
1986-1988 20 TEETH
1984-1985 RIGHT HAND; W/SPRING
1986-1988 W/SPRING
46
3.8-7 (231) ENG - 1986-87 - V6 - 3.800 Bore (REGAL TURBO)
47
3.8-B (231) ENG - 1986 - V6 - 3.800 Bore
48
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-359SC
359
CB100
S610
S621
BD58
INCLUDES [359], [S610] & [S323]
54 LINKS
40 TEETH
20 TEETH
RIGHT HAND; W/SPRING
INCLUDES [359], [S610] & [S621]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
W/SPRING
3.8-C (231) ENG - 1988-91 - V6 - 3.800 Bore
3pc Set
Chain
Continued on Next Page
28
3-359SB
359
S610
S323
BD44
3-375S
3-375SA
375
1988-1990 INCLUDES [375], [S718] & [S729]
1991 INCLUDES [375], [S716] & [S729]
54 LINKS
BUICK (Continued)
Line
No.
48
Part Title
Part No
Description
3.8-C (231) ENG - 1988-91 - V6 - 3.800 Bore (Continued)
Cam Button
Cam Sprocket
Crank Sprocket
Damper
CB300
S716
S718
S729
BD295
BD295
BD58
1988-1990
1991 40 TEETH
1988-1990 40 TEETH
20 TEETH
1988-1990
1991 2ND DES. W/COUNTER BORED DAMPER BOLT HOLE
1991 1ST DES. W/CHAMFERED DAMPER BOLT HOLE
49
3.8-K (231) ENG - 1995-05 - V6 - 3.800 Bore (M.F.I.)
50
3.8-L (231) ENG - 1990-95 - V6 - 3.800 Bore (S.F.I.)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-381AS
381A
S810
S811
BD344
3-375SA
3-381AS
375
381A
S716
S810
S729
S811
BD295
BD295
BD344
BD58
INCLUDES [381A], [S810], [S811]
64 LINKS
48 TEETH
24 TEETH
1990-1994 INCLUDES [375], [S716] & [S729]
1995 INCLUDES [381A], [S810], [S811]
1990-1994 54 LINKS
1995 64 LINKS
1990-1994 40 TEETH
1995 48 TEETH
1990-1994 20 TEETH
1995 24 TEETH
1990-1992 2ND DES. W/COUNTER- BORED DAMPER BOLT
HOLE
1993-1994
1995
1990-1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE
51
3.9-1,W (237) OHV ENG - 2006-07 - 6 Cyl. - 3.90 Bore (TERRAZA) GAS,FLEX
52
3.9-1,M (237) OHV ENG - 2009-11 - 6 Cyl. - 3.90 Bore (LUCERNE)
53
54
55
Chain
Crank Sprocket
Chain
Crank Sprocket
700
S847
700
S847
80 LINKS
25 TEETH
80 LINKS
25 TEETH
250 ENG - 1968-75 - 6 Cyl. - 3.88 Bore (CHEVROLET ENG) (APOLLO,LESABRE,SKYLARK,SPECIAL)
Gear Set
2542S
Cam Gear
Crank Gear
2542
2501
2537
Cam Thrust Plate Spacer
MG221
FIBER INCLUDES [2542] & [2537] ENGINES W/HEAD & INTAKE
MANIFOLD CAST AS ONE
54 TEETH FIBER
27 TEETH W/HEAD & INT. MANIFOLD SEPARATE
27 TEETH ENGINES W/HEAD & INTAKE MANIFOLD CAST AS
ONE
4.1-4 (252) ENG - 1980-84 - V6 - 3.965 Bore
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-359SB
359
CB100
S610
S323
BD44
BD45
INCLUDES [359], [S610] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
RIGHT HAND W/SPRING
LEFT HAND
4.2-S (256) DOHC ENG - 2004-07 - 6 Cyl. - 3.66 Bore (RAINIER CXL, CXL PLUS)
Timing Kit
3-195S
INCLUDES [195], [S908A], [S913], [BT5512], [BG5504], [BG5506],
[BG6006]
Continued on Next Page
29
BUICK (Continued)
Line
No.
55
Part Title
Part No
Description
4.2-S (256) DOHC ENG - 2004-07 - 6 Cyl. - 3.66 Bore (RAINIER CXL, CXL PLUS) (Continued)
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
195
S908A
S913
BT5512
BG5504
BG5506
BG6006
168 LINKS
58 TEETH
29 TEETH
RIGHT HAND
LEFT HAND
UPPER
56
260 ENG - 1975-76 - 8 Cyl. - 3.500 Bore (OLDSMOBILE)
57
4.3-S (265) ENG - 1980-81 - 8 Cyl. - 3.750 Bore (CHEVROLET)
58
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-365S
365
S494
S495
INCLUDES [498], [S348] & [S349]
48 LINKS
36 TEETH
18 TEETH
INCLUDES [365], [S494] & [S495]
60 LINKS
42 TEETH
21 TEETH
267-J ENG - 1981-82 - 8 Cyl. - 3.500 Bore (CHEVROLET) CANADA ONLY
3pc Set
Chain
Cam Sprocket
Crank Sprocket
59
3-498SC
498
S348
S349
3-163S
3-499S
163
499
S288
S390
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
4.6-S,Y,9 (281) DOHC ENG - 2006-11 - 8 Cyl. - 3.66 Bore (LUCERNE) 32V NORTHSTAR
Timing Kit
3-8MMSRH62S
Chain
8MMSRH126
8MMSRH62
S772
BT313
BT314
BD311
BD312
BG309
BG310
Intermediate Sprocket
Chain Tensioner
Damper
Chain Guide
KIT INCLUDES: (2) [8MMSRH126], [8MMSRH62], [BD311],
[BD312],(2) [BT313], [BT314], [BG309],(2) [BG310] (NOTE: THIS
KIT DOES NOT CONTAIN SPROCKETS)
126 LINKS UPPER (2) REQ.
62 LINKS LOWER
28/42 TEETH
2 REQ.; UPPER
LOWER
LEFT HAND
RIGHT HAND
LOWER LEFT
2 REQ.; UPPER
60
300 ENG - 1964-67 - 8 Cyl. - 3 3/4 Bore
61
301-W ENG - 1979-80 - 8 Cyl. - 4.000 Bore (PONTIAC)
62
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-365S
365
S494
S495
INCLUDES [359], [S334] & [S323]
54 LINKS
40 TEETH
20 TEETH
INCLUDES [365], [S494] & [S495]
60 LINKS
42 TEETH
21 TEETH
301-Y ENG - 1977-79 - 8 Cyl. - 4.000 Bore (PONTIAC)
3pc Set
Chain
Continued on Next Page
30
3-359S
359
S334
S323
3-365S
365
INCLUDES [365], [S494] & [S495]
60 LINKS
BUICK (Continued)
Line
No.
Part Title
Part No
Description
62
301-Y ENG - 1977-79 - 8 Cyl. - 4.000 Bore (PONTIAC) (Continued)
63
5.0-E (305) ENG - 1991 - 8 Cyl. - 3.736 Bore
64
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
S494
S495
3-506SC
499
S732
S391
42 TEETH
21 TEETH
INCLUDES [499], [S732] & [S391]
46 LINKS
36 TEETH
18 TEETH
5.0-G,H,U (305) ENG - 1977-87 - 8 Cyl. - 3.74 Bore (CENTURY,LESABRE,REGAL,SKYLARK)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-163S
3-499S
163
499
S288
S390
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
65
5.0-Y (307) ENG - 1980-90 - 8 Cyl. - 3.800 Bore (OLDSMOBILE)
66
322 ENG - 1953-56 - 8 Cyl. - 4.000 Bore
67
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain
3-498SC
498
S348
S349
491
3-3SRH60S
3-3SRH60SA
Chain
Cam Sprocket
3SRH60
S878
S894
69
70
52 LINKS
5.3-C,M,P (323,325) OHV ENG - 2004-09 - 8 Cyl. - 3.78 Bore (ALLURE 08-09, LACROSSE 08-09,
RAINIER 04-07) VORTEC
3pc Set
68
INCLUDES [498], [S348] & [S349]
48 LINKS
36 TEETH
18 TEETH
Crank Sprocket
S827
2008-2009 INCLUDES [3SRH60], [S894] & [S827]; FOR USE
W/SINGLE BOLT CAMSHAFT LACROSSE
2004-2007 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3
BOLT CAMSHAFT RAINIER
60 LINKS
2004-2007 44 TEETH; FOR USE W/3BOLT CAMSHAFT RAINIER;
RELUCTOR STYLE CAM SPROCKET, MUST BE USED WITH
[3SRH60] CHAIN
2008-2009 44 TEETH; FOR USE W/SINGLE BOLT CAM
LACROSSE
22 TEETH 22 TEETH RAINIER,LACROSSE ONLY
340 ENG - 1966-67 - 8 Cyl. - 3 3/4 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-359S
359
S334
S323
INCLUDES [359], [S334] & [S323]
54 LINKS
40 TEETH
20 TEETH
350 ENG - 1968-71 - 8 Cyl. - 3.80 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-359S
359
S334
S323
INCLUDES [359], [S334] & [S323]
54 LINKS
40 TEETH
20 TEETH
350 H,J,K,X ENG - 1972-80 - 8 Cyl. - 3.80 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-359S
359
S334
S323
INCLUDES [359], [S334] & [S323]
54 LINKS
40 TEETH
20 TEETH
31
BUICK (Continued)
Line
No.
71
Part Title
Part No
Description
350-L ENG - 1977-79 - 8 Cyl. - 4.000 Bore (CHEVROLET)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-163S
3-499S
163
499
S288
S390
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
72
350-R ENG - 1977-80 - 8 Cyl. - 4.06 Bore (OLDSMOBILE)
73
5.7 (350N) ENG - 1980-85 - 8 Cyl. - 4.00 Bore (OLDSMOBILE DIESEL)
74
75
76
77
78
79
80
81
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain
Crank Sprocket
180
S503
INCLUDES [498], [S348] & [S349]
48 LINKS
36 TEETH
18 TEETH
48 LINKS
18 TEETH
5.7-7 (350) ENG - 1992-93 - 8 Cyl. - 4.06 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-506SE
499
S732
S797
INCLUDES [499], [S732], [S797]
46 LINKS
36 TEETH
18 TEETH
5.7-P (350) ENG - 1994-96 - 8 Cyl. - 4.000 Bore (LT1)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-509SA
499
S814
S797
INCLUDES [499], [S797], [S814]
46 LINKS
36 TEETH
18 TEETH
364 ENG - 1957-66 - 8 Cyl. - 4.13 Bore
Chain
Cam Sprocket
Crank Sprocket
491
S332
S276
52 LINKS
38 TEETH
19 TEETH
400 ENG - 1967-69 - 8 Cyl. - 4.04 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-498SA
498
S398
S369
1967-1969 INCLUDES [498], [S398] & [S369] LATE
48 LINKS
1967-1969 36 TEETH LATE
18 TEETH
401 ENG - 1957-66 - 8 Cyl. - 4 3/16 Bore (400)
Chain
Cam Sprocket
Crank Sprocket
491
S332
S276
52 LINKS
38 TEETH
19 TEETH
403 ENG - 1977-79 - 8 Cyl. - 4.351 Bore (OLDSMOBILE)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-498SC
498
S348
S349
INCLUDES [498], [S348] & [S349]
48 LINKS
36 TEETH
18 TEETH
425 ENG - 1963-66 - 8 Cyl. - 4 5/16 Bore
Chain
Cam Sprocket
Crank Sprocket
491
S332
S276
52 LINKS
38 TEETH
19 TEETH
430 ENG - 1967-69 - 8 Cyl. - 4 3/16 Bore
3pc Set
Continued on Next Page
32
3-498SC
498
S348
S349
3-498SA
1967-1969 INCLUDES [498], [S398] & [S369] LATE 1967 & 19681969
BUICK (Continued)
Line
No.
Part Title
Part No
Description
81
430 ENG - 1967-69 - 8 Cyl. - 4 3/16 Bore (Continued)
82
455 ENG - 1970-76 - 8 Cyl. - 4 5/16 Bore
498
S398
S369
Chain
Cam Sprocket
Crank Sprocket
48 LINKS
1967-1969 36 TEETH LATE 1967 & 1968-1969
18 TEETH
3-498SA
498
S398
S369
3pc Set
Chain
Cam Sprocket
Crank Sprocket
INCLUDES [498], [S398] & [S369]
48 LINKS
36 TEETH
18 TEETH
CADILLAC
4 Cyl.
Engine
2.0-P (122)
6 Cyl.
Year
Line
1983-86
1
Engine
8 Cyl. (Continued)
Year
Line
Engine
8 Cyl. (Continued)
Year
Line
4.5-3 (273)
1990
12
5.7-P (350)
1994-96
27
4.5-5 (273)
1988-89
13
5.7-R (350) OHV
1999-00
28
2.8-T (170) DOHC
2005-07
2
4.5-8 (273)
1989-92
14
5.7-S (346) OHV
2004-05
29
2.8-W (173)
1985-88
3
4.6-6,9,A,S,Y (281) DOHC
1993-11
15
6.0-N,U (364) OHV
2002-07
30
3.0-R (185) DOHC
1997-01
4
4.9-B (300) OHV
1991-95
16
6.0-5,J (364) OHV
2009-13
31
3.0-G,Y (182) DOHC
2010-11
5
5.0-E (305)
1991-92
17
365
1956-58
32
3.0-5 (182) DOHC
2012-14
6
5.0-9 (307)
1987-90
18
6.0 (368) 6 & 9
1980-84
33
3.2-N (197) DOHC
2003-04
7
5.0-Y (307)
1986-90
19
6.2 (376) OHV
2007-14
34
3.6 (217) DOHC
2004-14
8
5.3 (322) L-HEAD
1942
20
390
1959-63
35
5.3-T (323) OHV
2002-05
21
425
1977-79
36
331
1949-55
22
429
1964-67
37
5.7 (346) L-HEAD
1942-48
23
472
1968-74
38
5.7-B,R,8 (350)
1976-80
24
8.2 (500)
1970-76
39
5.7 (350N) DIESEL
1978-85
25
5.7-7 (350) OHV
1990-93
26
8 Cyl.
4.1-7 (250)
1987-88
6 Cyl.
4.1-4 (252)
8 Cyl.
4.1-8 (252)
Line
No.
9
1980-82
10
1982-87
11
Part Title
Part No
Description
1
2.0-P (122) ENG - 1983-86 - 4 Cyl. - 3.39 Bore (CIMARRON) (CHEVROLET ENG)
2
2.8-T (170) DOHC ENG - 2005-07 - 6 Cyl. - 3.50 Bore (CTS)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-370S
395
S558
S549
BT5115
Timing Kit
3-1007S
Chain
1007
1044
S1229
S1225
S1227
BT5535
Crank Sprocket
Idler Sprocket
Chain Tensioner
BT5536
BT5537
Chain Guide
BG5530
INCLUDES [395], [S558], [S549] & [MPC-393]
58 LINKS
40 TEETH
20 TEETH
KIT INCLUDES [1007], (2) [1044], [S1225], [S1227], [S1229],
[BT5535], [BT5536], [BT5537], [BG5530], [BG5531], [BG5532],
[BG5533], [BG5534], [BG5548] FOR ENGINES USING ROLLER
TYPE SECONDARY (UPPER) CHAINS
78 LINKS PRIMARY ROLLER TIMING CHAIN
92 LINKS SECONDARY ROLLER TIMING CHAIN; 2 REQ.
24 TEETH
18 / 27 TEETH LEFT HAND
18 / 27 TEETH RIGHT HAND
INCLUDES GASKET AND 2 MOUNTING BOLTS TIMING CHAIN
TENSIONER; SECONDARY CHAIN; LEFT HAND UPPER
INCLUDES GASKET AND 2 MOUNTING BOLTS TIMING CHAIN
TENSIONER; SECONDARY CHAIN; RIGHT HAND UPPER
INCLUDES MOUNTING GASKET AND 2 MOUNTING BOLTS
TIMING CHAIN TENSIONER; PRIMARY
INCLUDES (2) MOUNTING BOLTS PRIMARY CHAIN; UPPER
Continued on Next Page
33
CADILLAC (Continued)
Line
No.
2
Part Title
Part No
Description
2.8-T (170) DOHC ENG - 2005-07 - 6 Cyl. - 3.50 Bore (CTS) (Continued)
Chain Guide
BG5531
BG5532
BG5533
BG5534
BG5548
INCLUDES 2 MOUNTING BOLTS SECONDARY CHAIN; LEFT
HAND
INCLUDES 2 MOUNTING BOLTS SECONDARY CHAIN; RIGHT
HAND
PRIMARY CHAIN; RIGHT HAND
PRIMARY CHAIN; LEFT HAND; LOWER
PRIMARY CHAIN; RIGHT HAND LOWER
3
2.8-W (173) ENG - 1985-88 - V6 - 3.50 Bore CIMARRON (CHEVROLET ENG)
4
3.0-R (185) DOHC ENG - 1997-01 - V6 - 3.40 Bore
5
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
Belt
3-372S
385
S620
S619
BD131
B-0285
INCLUDES [385], [S620] & [S619]
64 LINKS
40 TEETH
20 TEETH
225 TEETH
3.0-G,Y (182) DOHC ENG - 2010-11 - 6 Cyl. - 3.50 Bore (CTS,SRX) 24V LF1 (INCLUDES TRUCKS)
Timing Kit
3-753S
Chain
753
754
S921
S930
S932
BT5535
Crank Sprocket
Idler Sprocket
Chain Tensioner
BT5536
BT5537
Chain Guide
BG5530
BG5531
BG5532
BG5533
BG5534
BG5548
INCLUDES [753], (2) [754], [S921], [S930], [S932], [BT5535],
[BT5536], [BT5537], [BG5548], [BG5530], [BG5531], [BG5532],
[BG5533], [BG5534] FOR ENGINES USING SILENT TYPE CHAINS
96 LINKS LOWER; PRIMARY
114 LINKS UPPER; SECONDARY (2) REQUIRED
30 TEETH
22 TEETH INCLUDES MOUNTING BOLT LEFT HAND
22 TEETH INCLUDES MOUNTING BOLT RIGHT HAND
INCLUDES GASKET AND 2 MOUNTING BOLTS SECONDARY
CHAIN; LEFT HAND
INCLUDES GASKET AND 2 MOUNTING BOLTS SECONDARY
CHAIN; RIGHT HAND
INCLUDES MOUNTING GASKET AND 2 MOUNTING BOLTS
PRIMARY CHAIN
INCLUDES (2) MOUNTING BOLTS PRIMARY CHAIN; UPPER
INCLUDES 2 MOUNTING BOLTS SECONDARY CHAIN; LEFT
HAND
INCLUDES 2 MOUNTING BOLTS SECONDARY CHAIN; RIGHT
HAND
PRIMARY CHAIN; RIGHT HAND
PRIMARY CHAIN; LEFT HAND; LOWER
PRIMARY CHAIN; RIGHT HAND; LOWER
6
3.0-5 (182) DOHC ENG - 2012-14 - 6 Cyl. - 3.50 Bore (CTS) 24V LFW ENG.
7
3.2-N (197) DOHC ENG - 2003-04 - 6 Cyl. - 3.44 Bore (CTS)
8
3.6 (217) DOHC ENG - 2004-14 - 6 Cyl. - 3.70 Bore (ATS,CTS,STS,XTS,SRX) GAS,FLEX INCLUDES
TRUCKS, TURBOCHARGED
Crank Sprocket
Chain Guide
BG5534
Belt
Timing Kit
Continued on Next Page
34
S921
BG5532
B-0285
3-1007S
30 TEETH
INCLUDES 2 MOUNTING BOLTS SECONDARY CHAIN; RIGHT
HAND
PRIMARY CHAIN; LEFT HAND; LOWER
225 TEETH
2004-2006 KIT INCLUDES [1007], (2) [1044], [S1225], [S1227],
[S1229], [BT5535], [BT5536], [BT5537], [BG5530], [BG5531],
[BG5532], [BG5533], [BG5534], [BG5548] FOR ENGINES USING
ROLLER TYPE SECONDARY (UPPER) CHAINS
CADILLAC (Continued)
Line
No.
8
Part Title
Part No
3.6 (217) DOHC ENG - 2004-14 - 6 Cyl. - 3.70 Bore (ATS,CTS,STS,XTS,SRX) GAS,FLEX INCLUDES
TRUCKS, TURBOCHARGED (Continued)
Timing Kit
3-753S
Chain
1007
1044
753
754
Crank Sprocket
Idler Sprocket
Chain Tensioner
S1229
S921
S1225
S1227
S930
S932
BT5535
BT5536
BT5537
Chain Guide
BG5530
BG5531
BG5532
BG5533
BG5534
BG5548
9
10
11
Description
2007-2013 INCLUDES [753], (2) [754], [S921], [S930], [S932],
[BT5535], [BT5536], [BT5537], [BG5548], [BG5530], [BG5531],
[BG5532], [BG5533], [BG5534] EXC. 2012-13 CTS; FOR ENGINES
USING SILENT TYPE CHAIN
2004-2006 78 LINKS PRIMARY ROLLER TIMING CHAIN
2004-2006 92 LINKS SECONDARY ROLLER TIMING CHAIN; 2
REQ.
2007-2013 96 LINKS PRIMARY CHAIN; LOWER
2007-2013 114 LINKS SECONDARY CHAIN; UPPER (2)
REQUIRED
2004-2006 24 TEETH
2007-2013 30 TEETH
2004-2006 18 / 27 TEETH LEFT HAND
2004-2006 18 / 27 TEETH RIGHT HAND
2007-2013 22 TEETH INCLUDES MOUNTING BOLT LEFT HAND
2007-2013 22 TEETH INCLUDES MOUNTING BOLT RIGHT HAND
2004-2013 INCLUDES GASKET AND 2 MOUNTING BOLTS
TIMING CHAIN TENSIONER; SECONDARY CHAIN; LEFT HAND
UPPER
2004-2013 INCLUDES GASKET AND 2 MOUNTING BOLTS
TIMING CHAIN TENSIONER; SECONDARY CHAIN; RIGHT HAND
UPPER
2007-2013 INCLUDES MOUNTING GASKET AND 2 MOUNTING
BOLTS TIMING CHAIN TENSIONER; PRIMARY CHAIN
2004-2013 INCLUDES (2) MOUNTING BOLTS PRIMARY CHAIN;
UPPER; INCLUDES (2) MOUNTING BOLTS; EXC. 2012-13 CTS
2004-2013 INCLUDES 2 MOUNTING BOLTS SECONDARY
CHAIN; LEFT HAND
2004-2013 INCLUDES 2 MOUNTING BOLTS SECONDARY
CHAIN; RIGHT HAND
2004-2013 PRIMARY CHAIN; RIGHT HAND
2004-2013 PRIMARY CHAIN; LEFT HAND; LOWER
2007-2013 PRIMARY CHAIN; RIGHT HAND LOWER; EXC. 201213 CTS
4.1-7 (250) ENG - 1987-88 - 8 Cyl. - 3.47 Bore (ALLANTE')
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-503SB
503
S706
S533
INCLUDES [503], [S706] & [S533]
44 LINKS
34 TEETH
17 TEETH
4.1-4 (252) ENG - 1980-82 - V6 - 3.965 Bore (BUICK)
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-359SB
359
CB100
S610
S323
BD44
BD45
INCLUDES [359], [S610] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
RIGHT HAND W/SPRING
LEFT HAND
4.1-8 (252) ENG - 1982-87 - 8 Cyl. - 3.464 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-503S
503
S546
S533
INCLUDES [503], [S546] & [S533]
44 LINKS
34 TEETH
17 TEETH
35
CADILLAC (Continued)
Line
No.
Part Title
Part No
Description
12
4.5-3 (273) ENG - 1990 - 8 Cyl. - 3.62 Bore
13
4.5-5 (273) ENG - 1988-89 - 8 Cyl. - 3.62 Bore
14
15
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-503SB
503
S706
S533
3-503S
503
S546
S533
INCLUDES [503], [S706] & [S533]
44 LINKS
34 TEETH
17 TEETH
INCLUDES [503], [S546] & [S533]
44 LINKS
34 TEETH
17 TEETH
4.5-8 (273) ENG - 1989-92 - 8 Cyl. - 3.62 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-503SB
503
S706
S533
INCLUDES [503], [S706] & [S533]
44 LINKS
34 TEETH
17 TEETH
4.6-6,9,A,S,Y (281) DOHC ENG - 1993-11 - 8 Cyl. - 3.66 Bore
(ALLANTE,DEVILLE,DTS,ELDORADO,SEVILLE,SRX,STS,XLR) (INCLUDES TRUCKS) 32V
NORTHSTAR
Timing Kit
3-8MMSRH62S
3-8MMSRH62SA
Chain
Cam Sprocket
Crank Sprocket
Intermediate Sprocket
Chain Tensioner
Damper
Chain Guide
8MMSRH126
8MMSRH62
S768
S770
S780
S780
S795
S772
BT313
BT314
BD311
BD312
BG309
BG310
1993-2005 KIT INCLUDES: (2) [8MMSRH126], [8MMSRH62],
[BD311], [BD312],(2) [BT313], [BT314], [BG309],(2) [BG310]
(NOTE: THIS KIT DOES NOT CONTAIN SPROCKETS)
1993-1999 KIT INCLUDES: (2) [8MMSRH126], [8MMSRH62],
[BD311], [BD312],(2) [BT313], [BT314], [BG309],(2) [BG310],
[S768], [S770], [S772], (2) [S780], [S795] (NOTE: THIS KIT
CONTAINS SPROCKETS)
126 LINKS UPPER (2) REQ.
62 LINKS LOWER
1993-2002 40 TEETH RIGHT HAND INT.
1993-1999 40 TEETH RIGHT HAND EXH.
1993-2002 40 TEETH LEFT HAND INT.
1993-2002 40 TEETH LEFT HAND; EXH.
1993-1999 40 TEETH
1993-2009 28/42 TEETH 28 & 42 TEETH
1993-2008 UPPER (2 REQUIRED)
1993-2009 LOWER
1993-2009 LEFT HAND
1993-2009 RIGHT HAND
1993-2009 LOWER LEFT
1993-2005 UPPER (2) REQ.
16
4.9-B (300) OHV ENG - 1991-95 - 8 Cyl. - 3.62 Bore
17
5.0-E (305) ENG - 1991-92 - 8 Cyl. - 3.736 Bore
18
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-506SE
499
S732
S797
INCLUDES [503], [S706] & [S533]
44 LINKS
34 TEETH
17 TEETH
INCLUDES [499], [S732], [S797]
46 LINKS
36 TEETH
18 TEETH
5.0-9 (307) ENG - 1987-90 - 8 Cyl. - 3.80 Bore (BROUGHAM ARMORED VEHICLE-OLDS ENG) (NOT
PRODUCED IN 1988)
3pc Set
Continued on Next Page
36
3-503SB
503
S706
S533
3-498SC
INCLUDES [498], [S348] & [S349]
CADILLAC (Continued)
Line
No.
18
19
20
21
Part Title
Part No
Description
5.0-9 (307) ENG - 1987-90 - 8 Cyl. - 3.80 Bore (BROUGHAM ARMORED VEHICLE-OLDS ENG) (NOT
PRODUCED IN 1988) (Continued)
Chain
Cam Sprocket
Crank Sprocket
498
S348
S349
48 LINKS
36 TEETH
18 TEETH
5.0-Y (307) ENG - 1986-90 - 8 Cyl. - 3.800 Bore (OLDSMOBILE)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-498SC
498
S348
S349
INCLUDES [498], [S348] & [S349]
48 LINKS
36 TEETH
18 TEETH
5.3 (322) L-HEAD ENG - 1942 - 8 Cyl. - 3.38 Bore (SERIES 60)
Chain
349
62 LINKS
5.3-T (323) OHV ENG - 2002-05 - 8 Cyl. - 3.78 Bore (ESCALADE) VORTEC
3pc Set
3-3SRH60SA
Chain
Cam Sprocket
3SRH60
S878
Crank Sprocket
Chain Damper Adapter
Bracket
S827
BD417-BRKT
BD417-DBRKT
INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT
CAMSHAFT
60 LINKS
44 TEETH; FOR USE W/3BOLT CAMSHAFT RELUCTOR STYLE
CAM SPROCKET; HALF MOON HUB ON FACE
22 TEETH 22 TEETH
2002-2003 ALLOWS THE USE OF THE LS2 TIMING CHAIN
DAMPER [BD417] ON ANY GM LS ENGINE BLOCK NOT
ORIGINALLY EQUIPPED FOR CHAIN DAMPERS; DAMPER NOT
INCLUDED EXCLUDES VVT ENGINES
2002-2003 ALLOWS THE USE OF THE LS2 TIMING CHAIN
DAMPER [BD417] ON ANY GM LS ENGINE BLOCK NOT
ORIGINALLY EQUIPPED FOR CHAIN DAMPERS; INCLUDES
[BD417] DAMPER EXCLUDES VVT ENGINES
22
331 ENG - 1949-55 - 8 Cyl. - 3.8125 Bore
23
5.7 (346) L-HEAD ENG - 1942-48 - 8 Cyl. - 3.50 Bore (SERIES 61,62) (SERIES 60, 75 SPECIAL
FLEETWOOD) (COMMERCIAL CHASSIS)
Chain
Cam Sprocket
Crank Sprocket
Chain
499
S255
S256
349
349
46 LINKS
36 TEETH
18 TEETH
1942 62 LINKS
1946-1948 62 LINKS
24
5.7-B,R,8 (350) ENG - 1976-80 - 8 Cyl. - 4.06 Bore (ELDORADO,SEVILLE) EDI,TBI
25
5.7 (350N) DIESEL ENG - 1978-85 - 8 Cyl. - 4.00 Bore (OLDSMOBILE)
26
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain
Crank Sprocket
3-498SC
498
S348
S349
180
S503
INCLUDES [498], [S348] & [S349]
48 LINKS
36 TEETH
18 TEETH
48 LINKS
18 TEETH
5.7-7 (350) OHV ENG - 1990-93 - 8 Cyl. - 4.06 Bore
3pc Set
3-506SC
3-506SE
Chain
499
Cam Sprocket
Crank Sprocket
S732
S391
1990-1991 INCLUDES [499], [S732] & [S391] .40/.41 TOOTH
WIDTH W/BACK BEND. STANDARD DUTY SILENT CHAIN
1992-1993 INCLUDES [499], [S732], [S797] .40/.41 TOOTH WIDTH
W/BACK BEND. STANDARD DUTY SILENT CHAIN
46 LINKS .40/.41 TOOTH WIDTH W/BACK BEND; STANDARD
DUTY SILENT CHAIN
36 TEETH .40/.41 TOOTH WIDTH
1990-1991 18 TEETH .40/.41 TOOTH WIDTH
Continued on Next Page
37
CADILLAC (Continued)
Line
No.
Part Title
Part No
Description
26
5.7-7 (350) OHV ENG - 1990-93 - 8 Cyl. - 4.06 Bore (Continued)
27
5.7-P (350) ENG - 1994-96 - 8 Cyl. - 4.000 Bore (LT1)
28
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
S797
3-509SA
499
S814
S797
3pc Set
Chain
3-202SA
202
499
Cam Sprocket
S732
S784
Crank Sprocket
S645
S797
3pc Set
3-3SRH60SA
Chain
Cam Sprocket
Crank Sprocket
Damper
Chain Damper Adapter
Bracket
3SRH60
S878
S827
BD417
BD417-BRKT
INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT
CAMSHAFT
60 LINKS
44 TEETH; FOR USE W/3BOLT CAMSHAFT
22 TEETH 22 TEETH
2004 ALLOWS THE USE OF THE LS2 TIMING CHAIN DAMPER
[BD417] ON ANY GM LS ENGINE BLOCK NOT ORIGINALLY
EQUIPPED FOR CHAIN DAMPERS; DAMPER NOT INCLUDED
EXCLUDES VVT ENGINES
2004 ALLOWS THE USE OF THE LS2 TIMING CHAIN DAMPER
[BD417] ON ANY GM LS ENGINE BLOCK NOT ORIGINALLY
EQUIPPED FOR CHAIN DAMPERS; INCLUDES [BD417]
DAMPER EXCLUDES VVT ENGINES
6.0-N,U (364) OHV ENG - 2002-07 - 8 Cyl. - 4.00 Bore (CTS 2006-07, ESCALADE 2002-06) VORTEC
3pc Set
3-3SRH60SA
Chain
Cam Sprocket
3SRH60
S878
Crank Sprocket
Chain Damper Adapter
Bracket
S827
BD417-BRKT
Continued on Next Page
38
INCLUDES [202], [S784], [S645] .275/.285 TOOTH WIDTH;
STANDARD DUTY ROLLER CHAIN
INCLUDES [499], [S732], [S797] .40/.41 TOOTH WIDTH W/BACK
BEND; STANDARD DUTY SILENT CHAIN
46 LINKS .275/.285 TOOTH WIDTH, STANDARD DUTY ROLLER
CHAIN
46 LINKS 40/.41 TOOTH WIDTH; STANDARD DUTY SILENT
CHAIN
36 TEETH .40/.41 TOOTH WIDTH; USE WITH [506] HEAVY DUTY
SILENT CHAIN
36 TEETH .275/.285 TOOTH WIDTH; USE WITH [202]
STANDARD DUTY ROLLER CHAIN
18 TEETH .275/.285 TOOTH WIDTH; USE WITH [202]
STANDARD DUTY ROLLER CHAIN
18 TEETH .40/.41 TOOTH WIDTH; USE WITH [506] HEAVY DUTY
SILENT CHAIN
5.7-S (346) OHV ENG - 2004-05 - 8 Cyl. - 3.90 Bore (GEN III LS6 CTS-V)
BD417-DBRKT
30
INCLUDES [499], [S797], [S814]
46 LINKS
36 TEETH
18 TEETH
5.7-R (350) OHV ENG - 1999-00 - 8 Cyl. - 4.00 Bore (ESCALADE)
3-506SE
29
1992-1993 18 TEETH .40/.41 TOOTH WIDTH
2002-2006 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3
BOLT CAMSHAFT ESCALADE; W/RELUCTOR STYLE CAM
SPROCKET; HALF MOON HUB ON FACE
60 LINKS CTS,ESCALADE
2002-2006 44 TEETH; FOR USE W/3BOLT CAMSHAFT
ESCALADE; W/RELUCTOR STYLE CAM SPROCKET; HALF
MOON HUB ON FACE; TRUCKS ONLY
22 TEETH 22 TEETH CTS,ESCALADE
2002-2006 ALLOWS THE USE OF THE LS2 TIMING CHAIN
DAMPER [BD417] ON ANY GM LS ENGINE BLOCK NOT
ORIGINALLY EQUIPPED FOR CHAIN DAMPERS; DAMPER NOT
INCLUDED EXCLUDES VVT ENGINES
CADILLAC (Continued)
Line
No.
30
Part Title
32
33
34
35
36
37
39
BD417-DBRKT
2002-2006 ALLOWS THE USE OF THE LS2 TIMING CHAIN
DAMPER [BD417] ON ANY GM LS ENGINE BLOCK NOT
ORIGINALLY EQUIPPED FOR CHAIN DAMPERS; INCLUDES
[BD417] DAMPER EXCLUDES VVT ENGINES
6.0-5,J (364) OHV ENG - 2009-13 - 8 Cyl. - 4.00 Bore (ESCALADE HYBRID) (LFA,LZ1) VORTEC
FLEX/ELECTRIC
Chain
Crank Sprocket
Chain Tensioner
3SRH60
S827
BT5490
60 LINKS
22 TEETH 22 TEETH
2009-2012
365 ENG - 1956-58 - 8 Cyl. - 4.000 Bore
Chain
Cam Sprocket
Crank Sprocket
499
S255
S256
46 LINKS
36 TEETH
18 TEETH
6.0 (368) 6 & 9 ENG - 1980-84 - 8 Cyl. - 3.800 Bore (6.0-6 CARB.) (6.0-9 EFI)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-498S
498
S404
S405
INCLUDES [498], [S404] & [S405]
48 LINKS
36 TEETH
18 TEETH
6.2 (376) OHV ENG - 2007-14 - 8 Cyl. - 4.06 Bore (CTS,ESCALADE) VORTEC GAS/FLEX
Chain
Crank Sprocket
Chain Tensioner
3SRH60
S827
BT5490
2007-2013 60 LINKS
2007-2013 22 TEETH 22 TEETH
2007-2012
390 ENG - 1959-63 - 8 Cyl. - 4.000 Bore
Chain
Cam Sprocket
Crank Sprocket
505
S255
S370
S299
46 LINKS
1959-1962 36 TEETH
1963 36 TEETH
1959-1962 18 TEETH
425 ENG - 1977-79 - 8 Cyl. - 4.082 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-498S
498
S404
S405
INCLUDES [498], [S404] & [S405]
48 LINKS
36 TEETH
18 TEETH
429 ENG - 1964-67 - 8 Cyl. - 4.130 Bore
Chain
Cam Sprocket
38
Description
6.0-N,U (364) OHV ENG - 2002-07 - 8 Cyl. - 4.00 Bore (CTS 2006-07, ESCALADE 2002-06) VORTEC
(Continued)
Chain Damper Adapter
Bracket
31
Part No
Crank Sprocket
499
505
S370
S404
S365
1966-1967 46 LINKS
1964-1965 46 LINKS
1964-1965 36 TEETH
1966-1967 36 TEETH
1966-1967 18 TEETH
472 ENG - 1968-74 - 8 Cyl. - 4.300 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-498S
498
S404
S405
INCLUDES [498], [S404] & [S405]
48 LINKS
36 TEETH
18 TEETH
8.2 (500) ENG - 1970-76 - 8 Cyl. - 4.300 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-498S
498
S404
S405
INCLUDES [498], [S404] & [S405]
48 LINKS
36 TEETH
18 TEETH
39
CASE TRACTOR
4 Cyl.
Engine
Year
M38 & F124
Line
No.
1
Line
Engine
Year
Line
Engine
Year
Line
Year
Line
1
Part Title
Part No
Description
M38 & F124 ENG - 4 Cyl. - 3.00 Bore (V SERIES & CONTINENTAL)
2603
Crank Gear
24 TEETH
CHEVROLET
Year
Line
1.0-2 (61) SOHC
1987-92
1
151-V OHV
1978-80
35
3.9-1,3,R,W,M (237) OHV
2006-11
70
1.0-5 (61) SOHC
1986-88
2
2.5-2 (151) OHV
1982-86
36
250
1966-79
71
1.0-6 (61) SOHC
1989-00
3
2.5-5 (151)
1980-83
37
1.0-M (61) OHC
1985
4
2.5-F (151) OHV
1982-83
38
8 Cyl.
1975-77
72
2.5-R (151) OHV
1982-92
39
1962-70
40
1985-93
73
74
3 Cyl.
Engine
4 Cyl.
Engine
4 Cyl. (Continued)
Year
Line
Engine
6 Cyl. (Continued)
262
6 Cyl.
1.3-3 (79) SOHC
1992-94
5
153
1.3-9 (79) SOHC
1995-97
6
1.3-2 (79) SOHC
1998-01
7
6 Cyl.
2.8-1 (173)
1982-84
41
265
1955-57
1.4-I (85) OHC
1976-77
8
2.8-7 (173)
1980
42
4.3-W (265)
1994-96
75
1.5-7 (92) OHC
1985-89
9
2.8-S (173)
1985-89
43
267
1979-82
76
1.5-9 (92) OHC
1987-89
10
2.8-W (173)
1985-89
44
283 OHV
1957-67
77
1.6 (98) SOHC
1976-87
11
2.8-X (173)
1981-86
45
302
1967-69
78
1.6-4 (98) SOHC
1985-88
12
2.8-Z (173)
1981-84
46
5.0 (305)
1976-93
79
1.6-5 (98) DOHC
1988
13
3.1-D (189)
1990-95
47
5.0 (307)
1968-73
80
1.6-5 (98) DOHC
1990-91
14
3.1-J (189)
1999-03
48
5.0-Y (307)
1986-90
81
1.6-6 (98) DOHC
1989-97
15
3.1-M (189) OHV
1994-99
49
5.3-C (325) OHV
2006-09
82
1.6-6 (98) SOHC
1990-93
16
3.1-T (189)
1990-94
50
327
1962-69
83
1.6-6,E,G (98) DOHC
2004-11
17
3.1-W (189)
1993
51
348
1958-61
84
1.8-8 (110) DOHC
1992-97
18
194
1962-66
52
350
1967-71
85
1.8-8 (110) DOHC
1998-02
19
196
1978-79
53
350
1972-81
86
1.8-D (110) OHV
1981-86
20
200
1978-79
54
5.7-L,6,7 (350)
1982-93
87
2.0-1 (122) OHV
1987-89
21
3.4-E (207)
1996-05
55
5.7-N (350N)
1980-85
88
2.0-B (122) OHV
1983-84
22
3.4-S (207)
1993-95
56
5.7-8 (350)
1984-92
89
2.0-P (122) OHV
1983-86
23
3.4-X (207) DOHC
1991-97
57
5.7-8 (350)
1982
90
2.0-M,P,X (122) DOHC
2005-10
24
3.5-8,L (213) OHV
2004-06
58
5.7-G,S (350)
1997-04
91
2.2-4 (134) OHV
1992-02
25
3.5-K,N (213) OHV
2006-11
59
5.7-P (350)
1992-97
92
2.2-G (134) OHV
1990-91
26
217
1942-52
60
6.0-U (364) OHV
2005-07
93
2.2-B,D,F,H,6,W (134)
2002-11
27
3.6-3,7,V,D (217) DOHC
2008-14
61
6.2-W (376) OHV
2008-14
94
229
1980-84
62
396
1965-70
95
DOHC (134) DOHC
4.3-Z (262)
8 Cyl.
2.3-A (138) DOHC
1990-94
28
230
1963-70
63
400
1970-76
96
2.3-D (138) DOHC
1995
29
231-2
1979
64
402 (400)
1970-72
97
140 OHC
1971-77
30
231-3
1980-81
65
409
1958-65
98
2.4 (145) DOHC
2006-14
31
231-A
1978-87
66
427
1966-69
99
2.4-T (146) DOHC
1996-02
32
3.8-1,K (231)
1995-05
67
7.0-E (427) OHV
2006-13
100
151-1
1978-79
33
3.8-L (231)
1992-95
68
454
1970-76
101
151-9
1979
34
235
1940-62
69
Line
No.
1
2
Part Title
Description
1.0-2 (61) SOHC ENG - 1987-92 - 3 Cyl. - 74.0 MM Bore (SPRINT) (TURBOCHARGED SUZUKI ENG.)
Belt
Belt Tensioner
B-0166
B-095
BT139
1989-1992 97 TEETH
1987-1988 89 TEETH
1987-1988
1.0-5 (61) SOHC ENG - 1986-88 - 3 Cyl. - 74.0 MM Bore (2BC-CHEV SPRINT 1986-88, SPRINT
METRO 1987-88)
Belt
Continued on Next Page
40
Part No
B-095
89 TEETH
CHEVROLET (Continued)
Line
No.
2
3
Part Title
Part No
Description
1.0-5 (61) SOHC ENG - 1986-88 - 3 Cyl. - 74.0 MM Bore (2BC-CHEV SPRINT 1986-88, SPRINT
METRO 1987-88) (Continued)
Belt Tensioner
BT139
1.0-6 (61) SOHC ENG - 1989-00 - 3 Cyl. - 2.91 Bore (CHEVROLET METRO 1998-00) (GEO METRO
1989-97) (SUZUKI ENG)
Belt
B-0166
B-0194
B-0241
1989-1993 97 TEETH 1ST DESIGN USE W/CRANK SPROCKET
HAVING FOUR MOUNTING BOLT HOLES
1996-2000 97 TEETH
1993-1995 97 TEETH 2ND DESIGN USE W/CRANK SPROCKET
HAVING FIVE MOUNTING BOLT HOLES
4
1.0-M (61) OHC ENG - 1985 - 3 Cyl. - 74 MM Bore (2BC-CHEV SPRINT) (SUZUKI ENG)
5
1.3-3 (79) SOHC ENG - 1992-94 - 4 Cyl. - 2.91 Bore (GEO METRO BASE, LSI, XFI) SUZUKI 8V
ENGINE (CANADA ONLY)
6
7
8
9
10
11
Belt
Belt Tensioner
Belt
Belt Tensioner
13
B-095
BT139
89 TEETH
1992-1993 89 TEETH
1992-1993
1.3-9 (79) SOHC ENG - 1995-97 - 4 Cyl. - 2.91 Bore (GEO METRO) SUZUKI 16V ENGINE
Belt
B-0272
89 TEETH
1.3-2 (79) SOHC - 1998-01 - 4 Cyl. - 2.91 Bore (CHEVROLET METRO) SUZUKI 16V ENGINE
Belt
B-0194
97 TEETH
1.4-I (85) OHC ENG - 1976-77 - 4 Cyl. - 3.228 Bore
Belt
Crank Sprocket
B-037
S611
1976 99 TEETH
1977 19 TEETH
1.5-7,K (92) OHC ENG - 1985-89 - 4 Cyl. - 77 MM Bore (CHEVROLET 2BC-SPECTRUM BASE CL, CL
PLUS 1987-88) (GEO 2BC-SPECTRUM BASE 1989) (ISUZU ENG)
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
B-0162
S626
S641
BT134
112 TEETH
46 TEETH
23 TEETH
1.5-9 (92) OHC ENG - 1987-89 - 4 Cyl. - 77 MM Bore (CHEVROLET TURBO-SPECTRUM 1987-88)
(GEO TURBO-SPECTRUM 1989) (ISUZU ENG)
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
B-0162
S626
S641
BT134
112 TEETH
46 TEETH
23 TEETH
1.6 (98) SOHC ENG - 1976-87 - 4 Cyl. - 3.228 Bore (CHEVETTE) (1976-78 1.6-E) (1978 1.6-J)
(1979-80 1.6-O) (1980-81 1.6-9) (1982-87 1.6-C)
Belt
12
B-095
BT139
Crank Sprocket
B-037
B-039
B-061
S611
1976 99 TEETH
1977-1978 99 TEETH
1979-1987 100 TEETH
1977-1987 19 TEETH
1.6-4 (98) SOHC ENG - 1985-88 - 4 Cyl. - 3.07 Bore (NOVA) (LC9 TOYOTA ENG)
Timing Kit
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
B-070-1
B-070
S560
S551
BT66
KIT INCLUDES [B-070], [S560], [S551] & [BT66]
88 TEETH
36 TEETH
18 TEETH
1.6-5 (98) DOHC ENG - 1988-88 - 4 Cyl. - 80.0 MM Bore (NOVA TWIN CAM)
Belt
B-0112
113 TEETH
41
CHEVROLET (Continued)
Line
No.
Part Title
Part No
Description
14
1.6-5 (98) DOHC ENG - 1990-91 - 4 Cyl. - 80 MM Bore (EFI-GEO PRIZM, STORM) (LWO ISUZU ENG)
15
1.6-6 (98) DOHC ENG - 1989-97 - 4 Cyl. - 81 MM Bore (EFI-GEO PRIZM) ( LO1 TOYOTA ENG)
Belt
Belt
Belt Tensioner
B-0169
B-0236
B-036
BT342
BT66
159 TEETH
1993-1997 117 TEETH
1989-1992 94 TEETH
1993-1997
1989-1992
16
1.6-6 (98) SOHC ENG - 1990-93 - 4 Cyl. - 80 MM Bore (EFI-GEO STORM) (LO1 ISUZU ENG)
17
1.6-6,E,G (98) DOHC ENG - 2004-11 - 4 Cyl. - 3.11 Bore (AVEO, AVEO5)
18
19
Belt
Belt
B-0177
B-0310
112 TEETH
2004-2006 127 TEETH
1.8-8 (1788CC) DOHC ENG - 1992-97 - 4 Cyl. - 81.0 MM Bore (GEO PRIZM,STORM) (TOYOTA ENG)
Belt
Belt Tensioner
B-0205
B-0235
BT342
1992-1993 163 TEETH STORM
1993-1997 121 TEETH PRIZM
1993-1997 PRIZM
1.8-8 (110) DOHC ENG - 1998-02 - 4 Cyl. - 3.19 Bore (CHEVROLET PRIZM) (TOYOTA ENG)
Timing Kit
3-4200SA
1999-2002 SOLD AS KIT ONLY; KIT INCLUDES (1) CHAIN,(1)
TENSIONER,(2) GUIDES,(1) CAM SPROCKET,(1) CRANK
SPROCKET, (1) SEAL, (2) SHIMS, (1) PIVOT BOLT
20
1.8-D (110) OHV ENG - 1981-86 - 4 Cyl. - 3.31 Bore CHEVETTE (DIESEL) (ISUZU ENG)
21
2.0-1 (122) OHV ENG - 1987-89 - 4 Cyl. - 3.39 Bore (BERETTA,CAVALIER,CORSICA) (TBI)
22
23
24
Belt
Belt Guide
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
B-076
BG94
3-370S
395
S558
S549
BT5115
INCLUDES [395], [S558], [S549] & [MPC-393]
58 LINKS
40 TEETH
20 TEETH
2.0-B (122) OHV ENG - 1983-84 - 4 Cyl. - 3.39 Bore (CAVALIER) (2BC)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-370S
395
S558
S549
BT5115
INCLUDES [395], [S558], [S549] & [MPC-393]
58 LINKS
40 TEETH
20 TEETH
2.0-P (122) OHV ENG - 1983-86 - 4 Cyl. - 3.39 Bore (CAVALIER) (TBI)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-370S
395
S558
S549
BT5115
INCLUDES [395], [S558], [S549] & [MPC-393]
58 LINKS
40 TEETH
20 TEETH
2.0-M,P,X (122) DOHC ENG - 2005-10 - 4 Cyl. - 3.38 & 3.39 Bore (VIN P COBALT SUPERCHARGED)
(VIN M,X COBALT, HHR TURBOCHARGED) ECOTEC
Timing Kit
3-4201S
3-4201SX
3-4202S
Oil Jet Nozzle
Camshaft Bolt
Continued on Next Page
42
134 TEETH
5467N
5496B
KIT INCLUDES [4201F], (2) [S850], [S849], [BT5481], [BG5375],
[BG5381], [BG5382], [5467N], (2) [5496B] (INCLUDES
SPROCKETS) CAMSHAFT CHAIN KIT
KIT INCLUDES [4201F], [BT5481], [BG5375], [BG5381], [BG5382],
[5467N] (DOES NOT INCLUDE SPROCKETS) CAMSHAFT CHAIN
KIT
KIT INCLUDES [4202F], [S853], [S855], [S851], [BT5383],
[BG5384], [BG5385], [BG5386] BALANCE SHAFT CHAIN KIT
TORQUE TO YIELD BOLT 2 REQUIRED
CHEVROLET (Continued)
Line
No.
24
Part Title
Cam Sprocket
Crank Sprocket
Balance Shaft Sprocket
Water Pump Sprocket
Chain Tensioner
Chain Guide
26
27
Description
2.0-M,P,X (122) DOHC ENG - 2005-10 - 4 Cyl. - 3.38 & 3.39 Bore (VIN P COBALT SUPERCHARGED)
(VIN M,X COBALT, HHR TURBOCHARGED) ECOTEC (Continued)
Chain
25
Part No
4201F
4202F
S850
S850
S849
S851
S853
S911
BT5383
BT5481
BG5375
BG5381
BG5382
BG5384
BG5385
BG5386
148 LINKS CAMSHAFT CHAIN
134 LINKS BALANCE SHAFT CHAIN
46 TEETH EXH. CAMSHAFT CHAIN SPROCKET
46 TEETH INT. CAMSHAFT CHAIN SPROCKET
23 TEETH OUTER
42 TEETH INNER
21 TEETH LEFT HAND; INTAKE
40 TEETH
BALANCE SHAFT CHAIN TENSIONER; LOWER
NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mm O.A.L
CAMSHAFT CHAIN TENSIONER; RIGHT HAND UPPER
CAMSHAFT CHAIN GUIDE; RIGHT HAND
CAMSHAFT CHAIN GUIDE; LEFT HAND
CAMSHAFT CHAIN GUIDE; CENTER UPPER
BALANCE SHAFT CHAIN GUIDE; RIGHT HAND LOWER
BALANCE SHAFT CHAIN GUIDE; LEFT HAND LOWER
BALANCE SHAFT CHAIN GUIDE; UPPER
2.2-4 (134) OHV ENG - 1992-02 - 4 Cyl. - 3.500 Bore BARETTA, CAVALIER, CORSICA
3pc Set
3-370S
3-370SA
3-395S
Chain
Cam Thrust Plate Spacer
Cam Sprocket
395
MG221
S558
S774
S549
BT5115
Crank Sprocket
Chain Tensioner
1992-1993 INCLUDES [395], [S558], [S549] & [MPC-393]
1994-2002 INCLUDES [395], [S774], [S549] & [MPC-393]
1994-2002 INCLUDES [370], [S774], [S549], [BT5115] & [MPC-393]
RETRO FIT FINE FINISH CHAIN SET, CHECK FOR POSSIBLE
OILING PROBLEM WHEN INSTALLING SET.
58 LINKS
1992-1996
1992-1993 40 TEETH
1994-2002 40 TEETH
20 TEETH
FOR USE WITH BOTH [370] AND [395] CHAINS
2.2-G (134) OHV ENG - 1990-91 - 4 Cyl. - 3.44 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-370S
395
S558
S549
BT5115
INCLUDES [395], [S558], [S549] & [MPC-393]
58 LINKS
40 TEETH
20 TEETH
2.2-B,D,F,H,6,W (134) DOHC ENG - 2002-11 - 4 Cyl. - 3.39 Bore (L61 ENG ECOTEC) (CAVALIER,
COBALT, CLASSIC, HHR, MALIBU) INCLUDES BI FUEL
Timing Kit
3-4201S
3-4201SX
3-4202S
Oil Jet Nozzle
Camshaft Bolt
Chain
Cam Sprocket
5467N
5496B
4201F
4202F
S850
S850
KIT INCLUDES [4201F], (2) [S850], [S849], [BT5481], [BG5375],
[BG5381], [BG5382], [5467N], (2) [5496B] (INCLUDES
SPROCKETS) CAMSHAFT CHAIN KIT
KIT INCLUDES [4201F], [BT5481], [BG5375], [BG5381], [BG5382],
[5467N] (DOES NOT INCLUDE SPROCKETS) CAMSHAFT CHAIN
KIT
KIT INCLUDES [4202F], [S853], [S855], [S851], [BT5383],
[BG5384], [BG5385], [BG5386] BALANCE SHAFT CHAIN KIT
TORQUE TO YIELD BOLT 2 REQUIRED
148 LINKS CAMSHAFT CHAIN
134 LINKS BALANCE SHAFT CHAIN
46 TEETH EXH.
46 TEETH INT.
Continued on Next Page
43
CHEVROLET (Continued)
Line
No.
27
Part Title
Balance Shaft Sprocket
Water Pump Sprocket
Chain Tensioner
Chain Guide
S849
S851
S853
S855
S911
BT5383
BT5481
BG5375
BG5381
BG5382
BG5384
BG5385
BG5386
3pc Set
Chain
3-383S
383
383M
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
44
3DR130
S692
S734
S653
S747
BT188
BG304
BG305
BG306
1992-1994 INCLUDES [383], (2) [S734] & [S747] 2ND DES.;
SINGLE ROW
1990-1991 INCLUDES [3DR130], (2) [S692] & [S653] 1ST DES.;
DOUBLE ROW
1992-1994 130 LINKS STANDARD FINISH CHAIN 2ND DES.;
SINGLE ROW
1992-1994 130 LINKS FINE FINISH CHAIN 2ND DES.; SINGLE
ROW
1990-1991 130 LINKS 1ST DES.; DOUBLE ROW
1990-1991 38 TEETH (2) REQ.; 1ST DES.; DOUBLE ROW
1992-1994 38 TEETH (2) REQ.; 2ND DES.; SINGLE ROW
1990-1991 19 TEETH 1ST DES.; DOUBLE ROW
1992-1994 19 TEETH 2ND DES.; SINGLE ROW
1990-1991 1ST DES.
1992-1994 2ND DES.; 23MM WIDE; RIGHT HAND
1992-1994 2ND DES.; 23MM WIDE; LEFT HAND
1992-1994 2ND DES.; 23MM WIDE; UPPER
2.3-D (138) DOHC ENG - 1995 - 4 Cyl. - 3.62 Bore
Timing Kit
3-383SB
3pc Set
Chain
3-383S
383
383M
S734
S747
BG304
BG305
BG306
Cam Sprocket
Crank Sprocket
Chain Guide
30
23 TEETH OUTER
42 TEETH INNER
21 TEETH LEFT HAND; INTAKE
21 TEETH RIGHT HAND; EXHAUST
40 TEETH
BALANCE SHAFT CHAIN TENSIONER
NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mm O.A.L
CAMSHAFT CHAIN TENSIONER
CAMSHAFT CHAIN GUIDE; RIGHT HAND
CAMSHAFT CHAIN GUIDE; LEFT HAND
CAMSHAFT CHAIN GUIDE; UPPER
BALANCE SHAFT CHAIN GUIDE; RIGHT HAND
BALANCE SHAFT CHAIN GUIDE; LEFT HAND
BALANCE SHAFT CHAIN GUIDE; UPPER
2.3-A (138) DOHC ENG - 1990-94 - 4 Cyl. - 3.62 Bore
3-3DR130
29
Description
2.2-B,D,F,H,6,W (134) DOHC ENG - 2002-11 - 4 Cyl. - 3.39 Bore (L61 ENG ECOTEC) (CAVALIER,
COBALT, CLASSIC, HHR, MALIBU) INCLUDES BI FUEL (Continued)
Crank Sprocket
28
Part No
KIT INCLUDES [383], (2) [S734], [S747], [BG304], [BG305] &
[BG306] UPDATED TIMING CHAIN WILL NOT FIT ORIGINAL
WATER PUMP SPROCKET USE GM 24570609 WITH 383 CHAIN.
MELLING DOES NOT FURNISH
INCLUDES [383], (2) [S734] & [S747]
130 LINKS STANDARD FINISH CHAIN
130 LINKS FINE FINISH CHAIN
38 TEETH (2) REQ.
19 TEETH
RIGHT HAND
LEFT HAND
UPPER
140 OHC ENG - 1971-77 - 4 Cyl. - 3 1/2 Bore (VEGA)
Belt
Cam Sprocket
B-012
S426
91 TEETH
36 TEETH
Line
No.
31
CHEVROLET (Continued)
Part Title
Part No
2.4 (145) DOHC ENG - 2006-14 - 4 Cyl. - 3.46 Bore (COBALT,HHR,IMPALA,MALIBU,ORLANDO)
(GAS,FLEX,ELECTRIC) ECOTEC
Timing Kit
3-4201S
3-4201SX
3-4202S
Oil Jet Nozzle
Chain
Cam Sprocket
Crank Sprocket
Balance Shaft Sprocket
Chain Tensioner
5467N
4201F
4202F
S850
S849
S851
S853
S855
BT5383
BT5481
Chain Guide
BG5375
BG5381
BG5382
BG5384
BG5385
BG5386
32
2006-2008 KIT INCLUDES [4201F], (2) [S850], [S849], [BT5481],
[BG5375], [BG5381], [BG5382], [5467N], (2) [5496B] (INCLUDES
SPROCKETS) COBALT ONLY; CAMSHAFT CHAIN KIT
2006-2012 KIT INCLUDES [4201F], [BT5481], [BG5375], [BG5381],
[BG5382], [5467N] (DOES NOT INCLUDE SPROCKETS) EXC.
ORLANDO; CAMSHAFT CHAIN KIT
2006-2012 KIT INCLUDES [4202F], [S853], [S855], [S851],
[BT5383], [BG5384], [BG5385], [BG5386] EXC. ORLANDO;
BALANCE SHAFT CHAIN KIT
2006-2012 EXC. ORLANDO
2006-2012 148 LINKS EXC. ORLANDO; CAMSHAFT CHAIN
2006-2012 134 LINKS EXC. ORLANDO; BALANCE SHAFT CHAIN
2006-2008 46 TEETH 2 REQ. COBALT ONLY
2006-2012 23 TEETH EXC. ORLANDO; OUTER
2006-2012 42 TEETH EXC. ORLANDO; INNER
2006-2012 21 TEETH EXC. ORLANDO; LEFT HAND; INTAKE
2006-2012 21 TEETH EXC. ORLANDO; RIGHT HAND; EXHAUST
2006-2012 EXC. ORLANDO; BALANCE SHAFT CHAIN
TENSIONER
2006-2012 NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mm
O.A.L EXC. ORLANDO; CAMSHAFT CHAIN TENSIONER
2006-2012 EXC. ORLANDO; CAMSHAFT CHAIN GUIDE; RIGHT
HAND
2006-2012 EXC. ORLANDO; CAMSHAFT CHAIN GUIDE; LEFT
HAND
2006-2012 EXC. ORLANDO; CAMSHAFT CHAIN GUIDE; UPPER
2006-2012 EXC. ORLANDO; BALANCE SHAFT CHAIN GUIDE;
RIGHT HAND
2006-2012 EXC. ORLANDO; BALANCE SHAFT CHAIN GUIDE;
LEFT HAND
2006-2012 EXC. ORLANDO; BALANCE SHAFT CHAIN GUIDE;
UPPER
2.4-T (146) DOHC ENG - 1996-02 - 4 Cyl. - 3.54 Bore
Timing Kit
3-390SA
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-390S
390
S804T
S805
BT355
BT356
BG365
BG366
BG367
BG368
Chain Guide
33
Description
1997-2002 KIT INCLUDES [390], (2) [S804T], [S805], [BT355],
[BT356], [BG365], [BG366], [BG367]
INCLUDES [390], (2) [S804T], [S805]
130 LINKS
38 TEETH 2 REQUIRED
19 TEETH
1997-2002 TENSIONER ARM
1997-2002 HYDRAULIC (2ND DESIGN)
RIGHT HAND; CAMSHAFT
LEFT HAND; CAMSHAFT
UPPER; CAMSHAFT
BALANCE SHAFT
151-1 ENG - 1978-79 - 4 Cyl. - 4.000 Bore (PONTIAC)
Gear Set
Cam Gear
Crank Gear
Cam Thrust Plate Spacer
2538S
2542S
2524
2542
2537
MG221
ALUM. INCLUDES [2524] & [2537]
FIBER INCLUDES [2542] & [2537]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
45
CHEVROLET (Continued)
Line
No.
34
Part Title
Gear Set
Crank Gear
Cam Thrust Plate Spacer
Gear Set
Crank Gear
Cam Thrust Plate Spacer
Gear Set
Crank Gear
Cam Thrust Plate Spacer
Gear Set
Crank Gear
Cam Thrust Plate Spacer
Gear Set
Crank Gear
Cam Thrust Plate Spacer
Cam Gear
Crank Gear
Cam Thrust Plate Spacer
Cam Sprocket
Crank Sprocket
Chain Tensioner
ALUM. INCLUDES [2524] & [2537]
FIBER INCLUDES [2542] & [2537]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
2538S
2542S
2524
2542
2537
MG221
ALUM. INCLUDES [2524] & [2537]
FIBER INCLUDES [2542] & [2537]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
2538S
2542S
2524
2542
2537
MG221
ALUM. INCLUDES [2524] & [2537]
FIBER INCLUDES [2542] & [2537]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
3-378SA
378
2538S
2542S
2524
2542
2537
MG221
S690
S713
BT220
1991-1992 INCLUDES [378], [S690] & [S713]
1991-1992 56 LINKS
1982-1990 ALUM. INCLUDES [2524] & [2537]
1982-1990 FIBER INCLUDES [2542] & [2537]
1982-1990 54 TEETH ALUMINUM
1982-1990 54 TEETH FIBER
1982-1990 27 TEETH
1991-1992 42 TEETH
1991-1992 21 TEETH
1991-1992
153 ENG - 1962-70 - 4 Cyl. - 3 7/8 Bore
Gear Set
Cam Gear
Crank Gear
Continued on Next Page
46
2538S
2542S
2524
2542
2537
MG221
2.5-R (151) OHV ENG - 1982-92 - 4 Cyl. - 4.000 Bore (PONTIAC) (FOR VANS SEE
CHEVROLET/GMC TRUCKS)
3pc Set
Chain
Gear Set
40
ALUM. INCLUDES [2524] & [2537]
FIBER INCLUDES [2542] & [2537]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
2.5-F (151) OHV ENG - 1982-83 - 4 Cyl. - 4.000 Bore (PONTIAC) (EXPORT ONLY)
Cam Gear
39
2538S
2542S
2524
2542
2537
MG221
2.5-5 (151) ENG - 1980-83 - 4 Cyl. - 4.000 Bore (PONTIAC)
Cam Gear
38
ALUM. INCLUDES [2524] & [2537]
FIBER INCLUDES [2542] & [2537]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
2.5-2 (151) OHV ENG - 1982-86 - 4 Cyl. - 4.000 Bore (PONTIAC)
Cam Gear
37
2538S
2542S
2524
2542
2537
MG221
151-V OHV ENG - 1978-80 - 4 Cyl. - 4.000 Bore (PONTIAC)
Cam Gear
36
Description
151-9 ENG - 1979 - 4 Cyl. - 4.000 Bore (PONTIAC)
Cam Gear
35
Part No
2525S
2524
2542
2501
INCLUDES [2524] & [2501]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
CHEVROLET (Continued)
Line
No.
Part Title
Part No
Description
40
153 ENG - 1962-70 - 4 Cyl. - 3 7/8 Bore (Continued)
41
2.8-1 (173) ENG - 1982-84 - V6 - 89 MM Bore
42
43
44
Cam Thrust Plate Spacer
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
MG221
3-373S
373
S506
S511
BD59
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
2.8-7 (173) ENG - 1980 - V6 - 89 MM Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-373S
373
S506
S511
BD59
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
2.8-S (173) ENG - 1985-89 - V6 - 89 MM Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-373S
373
S506
S511
BD59
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
2.8-W (173) ENG - 1985-89 - V6 - 89 MM Bore
3pc Set
3-372S
3-372S
3-373S
Chain
373
385
385
S506
S620
S620
S511
S619
S619
BD131
BD131
BD59
Cam Sprocket
Crank Sprocket
Damper
1985-1986 INCLUDES [385], [S620] & [S619] CAVALIER
1987-1989 INCLUDES [385], [S620] & [S619]
1985-1986 INCLUDES [373], [S506] & [S511] CELEBRITY &
CITATION
1985-1986 64 LINKS CELEBRITY & CITATION
1985-1986 64 LINKS CAVALIER
1987-1989 64 LINKS
1985-1986 40 TEETH CELEBRITY & CITATION
1985-1986 40 TEETH CAVALIER
1987-1989 40 TEETH
1985-1986 20 TEETH CELEBRITY & CITATION
1985-1986 20 TEETH CAVALIER
1987-1989 20 TEETH
1985-1986 CADET & CAVALIER
1987-1989
1985-1986 EXC. CADET & CAVALIER
45
2.8-X (173) ENG - 1981-86 - V6 - 89 MM Bore
46
2.8-Z (173) ENG - 1981-84 - V6 - 89 MM Bore
47
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-373S
373
S506
S511
BD59
3-373S
373
S506
S511
BD59
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
3.1-D (189) ENG - 1990-95 - V6 - 3.50 Bore (LUMINA APV VAN)
3pc Set
Chain
Cam Sprocket
3-372S
385
S620
INCLUDES [385], [S620] & [S619]
64 LINKS
40 TEETH
Continued on Next Page
47
CHEVROLET (Continued)
Line
No.
Part Title
Part No
Description
47
3.1-D (189) ENG - 1990-95 - V6 - 3.50 Bore (LUMINA APV VAN) (Continued)
48
3.1-J (189) ENG - 1999-03 - V6 - 3.50 Bore (LUMINA, MAILBU)
Crank Sprocket
Damper
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
49
S619
BD131
3-385SC
3-700SB
3-385S
3-700S
385
700
S756
S848
S619
S847
BD336
BD600
Timing Kit
3-385SC
3-385SC
3-700SB
3pc Set
3-385S
3-385S
Chain
Cam Thrust Plate Spacer
Cam Sprocket
Crank Sprocket
Damper
385
385
700
MG221
S756
S756
S848
S619
S619
S847
BD336
BD600
1994-1998 KIT INCLUDES [385], [S619], [S756], [BD336]
1999 KIT INCLUDES [385], [S619], [S756], [BD336] 1ST DES.
1999 KIT INCLUDES [700], [S847], [S848], [BD600] 2ND DES.
W/79 LINK CHAIN; 50 TOOTH CAM SPROCKET; 25 TOOTH
CRANK SPROCKET
1994-1998 INCLUDES [385], [S756] & [S619]
1999 INCLUDES [385], [S756] & [S619] 1ST DES. W/64 LINK
CHAIN, 40 TOOTH CAM SPROCKET & 20 TOOTH CRANK
SPROCKET
1999 INCLUDES [700], [S847], [S848] 2ND DES. W/79 LINK
CHAIN, 50 TOOTH CAM SPROCKET & 25 TOOTH CRANK
SPROCKET
1994-1998 64 LINKS
1999 64 LINKS 1ST DES.
1999 80 LINKS 2ND DES. W/80 LINKS
1994-1995
1994-1998 40 TEETH
1999 40 TEETH 1ST DES.
1999 50 TEETH 2ND DES.
1994-1998 20 TEETH
1999 20 TEETH 1ST DES.
1999 25 TEETH 2ND DES.
1994-1999 1ST. DES.
1999 2ND DES.
3.1-T (189) ENG - 1990-94 - V6 - 3.503 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
48
1999 KIT INCLUDES [385], [S619], [S756], [BD336]
2000-2003 KIT INCLUDES [700], [S847], [S848], [BD600]
1999 INCLUDES [385], [S756] & [S619]
2000-2003 INCLUDES [700], [S847], [S848]
1999 64 LINKS
2000-2003 80 LINKS
1999 40 TEETH
2000-2003 50 TEETH
1999 20 TEETH
2000-2003 25 TEETH
1999
2000-2003
3.1-M (189) OHV ENG - 1994-99 - V6 - 3.50 Bore
3-700S
50
20 TEETH
1990-1993
3-372S
3-373S
373
385
S506
S620
S511
S619
BD131
BD59
INCLUDES [385], [S620] & [S619] EXC. CAMARO
1990-1992 INCLUDES [373], [S506] & [S511] CAMARO ONLY
1990-1992 64 LINKS CAMARO ONLY
64 LINKS EXC. CAMARO
1990-1992 40 TEETH CAMARO ONLY
40 TEETH EXC. CAMARO
1990-1992 20 TEETH CAMARO ONLY
20 TEETH EXC. CAMARO
1990-1993 EXC. CAMARO
1990-1992 CAMARO
CHEVROLET (Continued)
Line
No.
Part Title
Part No
51
3.1-W (189) ENG - 1993 - V6 - 3.50 Bore
52
194 ENG - 1962-66 - 6 Cyl. - 3 9/16 Bore
53
54
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
Gear Set
Cam Gear
Crank Gear
Cam Thrust Plate Spacer
2525S
2524
2542
2501
MG221
INCLUDES [385], [S620] & [S619]
64 LINKS
40 TEETH
20 TEETH
INCLUDES [2524] & [2501]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
196 ENG - 1978-79 - V6 - 3 1/2 Bore (BUICK)
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-359SB
359
CB100
S610
S323
BD44
BD45
INCLUDES [359], [S610] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
RIGHT HAND W/SPRING
LEFT HAND
200 ENG - 1978-79 - V6 - 3 1/2 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
55
3-372S
385
S620
S619
BD131
Description
3-163S
3-499SA
163
499
S288
S390
S289
S505
INCLUDES [163], [S288] & [S289] H.D.
INCLUDES [499], [S390] & [S505]
58 LINKS H.D.
46 LINKS
44 TEETH H.D.
36 TEETH
22 TEETH H.D.
18 TEETH
3.4-E (207) ENG - 1996-05 - V6 - 3.62 Bore (1996 LUMINA VAN) (1997-05 VENTURE) (2000-05
MONTE CARLO & IMPALA)
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-385SC
3-700SB
3-385S
3-700S
385
700
S756
S848
S619
S847
BD336
BD600
1996-1999 KIT INCLUDES [385], [S619], [S756], [BD336]
2000-2005 KIT INCLUDES [700], [S847], [S848], [BD600]
1996-1999 INCLUDES [385], [S756] & [S619]
2000-2005 INCLUDES [700], [S847], [S848]
1996-1999 64 LINKS
2000-2005 80 LINKS
1996-1999 40 TEETH
2000-2005 50 TEETH
1996-1999 20 TEETH
2000-2005 25 TEETH
1996-1999
2000-2005
56
3.4-S (207) ENG - 1993-95 - V6 - 3.62 Bore
57
3.4-X (207) DOHC ENG - 1991-97 - V6 - 3.62 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
Belt
3-373S
373
S506
S511
BD59
3-382S
382
B-0192
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
1993
INCLUDES [382], [S719] & [S758]
64 LINKS CRANKSHAFT TO INTERMEDIATE SHAFT
1991-1995 169 TEETH INTERMEDIATE SHAFT TO CAMSHAFTS
Continued on Next Page
49
CHEVROLET (Continued)
Line
No.
Part Title
Part No
Description
57
3.4-X (207) DOHC ENG - 1991-97 - V6 - 3.62 Bore (Continued)
58
3.5-8,L (213) OHV ENG - 2004-06 - 6 Cyl. - 3.70 Bore (MALIBU 2004-06), (UPLANDER 2005-06)
59
60
61
Belt
Crank Sprocket
Intermediate Sprocket
Belt Tensioner
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
B-0273
S719
S758
BT308
3-700SB
3-700S
700
S848
S847
BD600
KIT INCLUDES [700], [S847], [S848], [BD600]
INCLUDES [700], [S847], [S848]
80 LINKS
50 TEETH
25 TEETH
MALIBU
3.5-K,N (213) OHV ENG - 2006-11 - 6 Cyl. - 3.90 Bore (IMPALA, MALIBU, MONTE CARLO)
INCLUDES FLEX FUEL
Chain
Crank Sprocket
700
S847
80 LINKS
25 TEETH
217 ENG - 1942-52 - 6 Cyl. - 3 1/2 Bore (NOT PRODUCED 1943-45)
Gear Set
Cam Gear
Crank Gear
2516S
2514
2501
INCLUDES [2514] & [2501]
54 TEETH ALUM
27 TEETH
3.6-3,7,V,D (217) DOHC ENG - 2008-14 - 6 Cyl. - 3.70 Bore (MALIBU,CAMARO,IMPALA,CAPRICE)
GAS/FLEX
Timing Kit
3-753S
Chain
753
754
Crank Sprocket
Idler Sprocket
S921
S930
S932
Chain Tensioner
BT5535
BT5536
BT5537
Chain Guide
BG5530
BG5531
BG5532
BG5533
BG5534
BG5548
50
1996-1997 200 TEETH INTERMEDIATE SHAFT TO CAMSHAFTS
20 TEETH
40 TEETH CHAIN DRIVE
CHAIN DRIVE
2008-2010 INCLUDES [753], (2) [754], [S921], [S930], [S932],
[BT5535], [BT5536], [BT5537], [BG5548], [BG5530], [BG5531],
[BG5532], [BG5533], [BG5534] 2010 CAMARO, MALIBU; FOR
ENGINES USING SILENT TYPE CHAINS
2008-2013 96 LINKS PRIMARY CHAIN; LOWER
2008-2013 114 LINKS SECONDARY CHAIN; UPPER (2)
REQUIRED
30 TEETH EXC. MALIBU
2008-2013 22 TEETH INCLUDES MOUNTING BOLT LEFT HAND;
EXC. 2011-13 CAMARO & CAPRICE
2008-2013 22 TEETH INCLUDES MOUNTING BOLT RIGHT
HAND; EXC. 2011-13 CAMARO & CAPRICE
2008-2013 INCLUDES GASKET AND 2 MOUNTING BOLTS
SECONDARY CHAIN; LEFT HAND
2008-2013 INCLUDES GASKET AND 2 MOUNTING BOLTS
SECONDARY CHAIN; RIGHT HAND
2008-2013 INCLUDES MOUNTING GASKET AND 2 MOUNTING
BOLTS PRIMARY CHAIN; 2010 CAMARO, 2012-13 IMPALA &
2008-10 MALIBU
2008-2013 INCLUDES (2) MOUNTING BOLTS PRIMARY CHAIN;
UPPER; EXC. CAPRICE
2008-2013 INCLUDES 2 MOUNTING BOLTS SECONDARY
CHAIN; LEFT HAND
2008-2013 INCLUDES 2 MOUNTING BOLTS SECONDARY
CHAIN; RIGHT HAND; EXC. CAPRICE
2008-2013 PRIMARY CHAIN; RIGHT HAND; EXC. CAPRICE
2008-2013 PRIMARY CHAIN; LEFT HAND; LOWER; EXC.
CAPRICE
2008-2012 PRIMARY CHAIN; RIGHT HAND; LOWER; 2010
CAMARO, 2008-12 MALIBU
CHEVROLET (Continued)
Line
No.
62
Part Title
3pc Set
Cam Sprocket
Crank Sprocket
64
Description
229 ENG - 1980-84 - V6 - 3.736 Bore (INC.EL CAMINO)
Chain
63
Part No
3-163S
3-499SA
163
499
S288
S390
S289
S505
INCLUDES [163], [S288] & [S289] H.D.
INCLUDES [499], [S390] & [S505]
58 LINKS H.D.
46 LINKS
44 TEETH H.D.
36 TEETH
22 TEETH H.D.
18 TEETH
230 ENG - 1963-70 - 6 Cyl. - 3 7/8 Bore
Gear Set
Cam Gear
Crank Gear
Cam Thrust Plate Spacer
2525S
2524
2542
2501
MG221
INCLUDES [2524] & [2501]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
231-2 ENG - 1979 - V6 - 3.78 Bore BUICK ENG
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-359SB
359
CB100
S610
S323
BD44
BD45
INCLUDES [359], [S610] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
RIGHT HAND W/SPRING
LEFT HAND
65
231-3 ENG - 1980-81 - V6 - 3.800 Bore (BUICK)
66
231-A ENG - 1978-87 - V6 - 3.80 Bore (BUICK ENG)(FOR CABALLERO & EL CAMINO SEE TRUCKS)
67
3.8-1,K (231) ENG - 1995-05 - V6 - 3.800 Bore (M.F.I.) (3.8-1 S/C) (3.8-K NON S/C)
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
Cam Sprocket
68
Crank Sprocket
Damper
3-359SB
359
CB100
S610
S323
BD44
BD45
3-359SB
359
CB100
S610
S323
BD44
BD45
3-381AS
3-381ASB
381A
S810
S812
S811
BD344
INCLUDES [359], [S610] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
RIGHT HAND W/SPRING
LEFT HAND
INCLUDES [359], [S610] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
RIGHT HAND W/SPRING
1978-1981 LEFT HAND
INCLUDES [381A], [S810], [S811] (NON SUPERCHARGED)
2004-2005 INCLUDES [381A], [S811] & [S812] (SUPERCHARGED)
64 LINKS
48 TEETH NON SUPERCHARGED
2004-2005 48 TEETH SUPERCHARGED
24 TEETH
3.8-L (231) ENG - 1992-95 - V6 - 3.800 Bore (LUMINA VAN)
3pc Set
Chain
Cam Sprocket
3-375SA
3-381AS
375
381A
S716
1992-1994 INCLUDES [375], [S716] & [S729]
1995 INCLUDES [381A], [S810], [S811]
1992-1994 54 LINKS
1995 64 LINKS
1992-1994 40 TEETH
Continued on Next Page
51
CHEVROLET (Continued)
Line
No.
68
Part Title
70
71
Cam Sprocket
Crank Sprocket
S810
S729
S811
BD295
BD295
BD344
BD58
Gear Set
Cam Gear
Crank Gear
2516S
2500
2514
2501
Chain
Crank Sprocket
700
S847
80 LINKS
25 TEETH
250 ENG - 1966-79 - 6 Cyl. - 3.88 Bore (INCLUDES CARS ONLY)
Gear Set
2525S
2540S
Cam Gear
Crank Gear
2524
2526
2542
2501
2527
2537
Cam Thrust Plate Spacer
MG221
1966-1976 INCLUDES [2524] & [2501] W/INT. MANIFOLD & CYL.
HEAD CAST SEPARATE
1975-1976 ALUM. CAM GEAR & STEEL CRANK GEAR H.D.
W/INTAKE MANIFOLD & CYL. HEAD CAST SEPARATE
1975-1976 ALUM. INCLUDES [2524] & [2537] TO EARLY 76
W/INTAKE MANIFOLD CAST AS INTEGRAL PART OF CYL. HEAD
1976-1979 INCLUDES [2526] & [2541] LATE 1976 W/INTAKE
MANIFOLD CAST AS INTEGRAL PART OF CYL. HEAD
1966-1977 54 TEETH ALUMINUM W/GEAR STAMPED #14
1975-1979 54 TEETH W/GEAR STAMPED #20
1966-1977 54 TEETH FIBER W/GEAR STAMPED #14
1966-1976 27 TEETH W/INT. MANIFOLD & CYL. HEAD CAST
SEPARATE
1975-1976 27 TEETH H.D. W/INTAKE MANIFOLD & CYL. HEAD
CAST SEPARATE
1975-1976 27 TEETH TO EARLY 1976 W/CAM GEAR STAMPED
#14 & CRANK GEAR STAMPED #71 & INTAKE MANIFOLD CAST
AS INTEGRAL PART OF CYL. HEAD
262 ENG - 1975-77 - 8 Cyl. - 3.67 Bore (MONZA,NOVA)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-163S
3-499S
163
499
S288
S390
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
4.3-Z (262) ENG - 1985-93 - V6 - 4.000 Bore (4.3-Z NOT USED IN 1991)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
52
INCLUDES [2514] & [2501] W/ALUMINUM CAM GEAR
54 TEETH FIBER
54 TEETH ALUM
27 TEETH
3.9-1,3,R,W,M (237) OHV ENG - 2006-11 - 6 Cyl. - 3.90 Bore (IMPALA,MALIBU,MONTE
CARLO,UPLANDER) GAS/FLEX FUEL
2538S
73
1995 48 TEETH
1992-1994 20 TEETH
1995 24 TEETH
1992 2ND DES. W/COUNTER- BORED DAMPER BOLT HOLE
1993-1994
1995
1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE
235 ENG - 1940-62 - 6 Cyl. - 3.56 Bore
2528S
72
Description
3.8-L (231) ENG - 1992-95 - V6 - 3.800 Bore (LUMINA VAN) (Continued)
Damper
69
Part No
3-499SA
3-506SB
499
S390
S732
S505
1985-1986 INCLUDES [499], [S390] & [S505]
1987-1993 INCLUDES [499], [S732] & [S505]
46 LINKS
1985-1986 36 TEETH
1987-1993 36 TEETH
18 TEETH
CHEVROLET (Continued)
Line
No.
74
Part Title
Part No
Description
265 ENG - 1955-57 - 8 Cyl. - 3 3/4 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-163S
3-489S
163
505
S261
S288
S262
S289
INCLUDES [163], [S288] & [S289] H.D.
INCLUDES [505],[S261] & [S262]
58 LINKS H.D.
46 LINKS
36 TEETH
44 TEETH H.D.
18 TEETH
22 TEETH H.D.
75
4.3-W (265) ENG - 1994-96 - 8 Cyl. - 3.67 Bore
76
267 ENG - 1979-82 - 8 Cyl. - 3 1/2 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
77
3pc Set
Cam Sprocket
Crank Sprocket
INCLUDES [163], [S288] & [S289] HEAVY DUTY
INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
3-163S
3-489S
3-499S
163
499
505
S261
S288
S390
S262
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
1957-1966 INCLUDES [505],[S261] & [S262] STANDARD DUTY
1967 INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
1967 46 LINKS STANDARD DUTY
1957-1966 46 LINKS STANDARD DUTY
1957-1966 36 TEETH STANDARD DUTY
44 TEETH HEAVY DUTY
1967 36 TEETH STANDARD DUTY
1957-1966 18 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
1967 18 TEETH STANDARD DUTY
302 ENG - 1967-69 - 8 Cyl. - 4.000 Bore (SPECIAL ENGINE FOR CAMARO)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
79
3-163S
3-499S
163
499
S288
S390
S289
S391
INCLUDES [499], [S797], [S814]
46 LINKS
36 TEETH
18 TEETH
283 OHV ENG - 1957-67 - 8 Cyl. - 3.88 Bore
Chain
78
3-509SA
499
S814
S797
3-163S
3-499S
163
499
S288
S390
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
5.0 (305) ENG - 1976-93 - 8 Cyl. - 3.74 Bore (CARS ONLY FOR VAN LISTINGS SEE TRUCKS)
3pc Set
3-163S
3-499S
3-506SC
Chain
163
499
1976-1986 INCLUDES [163], [S288] & [S289] HEAVY DUTY
1976-1987 INCLUDES [499], [S390] & [S391] STANDARD DUTY
EXCLUDES ROLLER CAM
1987-1993 INCLUDES [499], [S732] & [S391] STANDARD DUTY;
W/ROLLER CAM
1976-1986 58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
Continued on Next Page
53
CHEVROLET (Continued)
Line
No.
79
Part Title
Description
5.0 (305) ENG - 1976-93 - 8 Cyl. - 3.74 Bore (CARS ONLY FOR VAN LISTINGS SEE TRUCKS)
(Continued)
Cam Sprocket
Crank Sprocket
80
Part No
S288
S390
S732
S289
S391
1976-1986 44 TEETH HEAVY DUTY
1976-1987 36 TEETH STANDARD DUTY; EXC. ROLLER CAM
1987-1993 36 TEETH STANDARD DUTY; W/ROLLER CAM
1976-1986 22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
5.0 (307) ENG - 1968-73 - 8 Cyl. - 3 7/8 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-163S
3-499S
163
499
S288
S390
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
81
5.0-Y (307) ENG - 1986-90 - 8 Cyl. - 3.800 Bore (OLDSMOBILE ENG)
82
5.3-C (325) OHV ENG - 2006-09 - 8 Cyl. - 3.78 Bore (GEN IV LS4 IMPALA, MONTE CARLO)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3pc Set
3-498SC
498
S348
S349
3-3SRH60S
3-3SRH60SA
Chain
Cam Sprocket
83
Crank Sprocket
Chain Tensioner
Damper
3SRH60
S878
S894
S827
BT5490
BD417
INCLUDES [498], [S348] & [S349]
48 LINKS
36 TEETH
18 TEETH
2007-2009 INCLUDES [3SRH60], [S894] & [S827]; FOR USE
W/SINGLE BOLT CAMSHAFT
2006 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT
CAMSHAFT
60 LINKS
2006 44 TEETH; FOR USE W/3BOLT CAMSHAFT
2007-2009 44 TEETH; FOR USE W/SINGLE BOLT CAM
22 TEETH 22 TEETH
2007-2009
2006
327 ENG - 1962-69 - 8 Cyl. - 4.000 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-163S
3-489S
3-499S
163
499
505
S261
S288
S390
S262
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
1962-1966 INCLUDES [505],[S261] & [S262] STANDARD DUTY
1967-1969 INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
1967-1969 46 LINKS STANDARD DUTY
1962-1966 46 LINKS STANDARD DUTY
1962-1966 36 TEETH STANDARD DUTY
44 TEETH HEAVY DUTY
1967-1969 36 TEETH STANDARD DUTY
1962-1966 18 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
1967-1969 18 TEETH STANDARD DUTY
84
348 ENG - 1958-61 - 8 Cyl. - 4 1/8 Bore (EXC HIGH PERFORMANCE)
85
350 ENG - 1967-71 - 8 Cyl. - 4.00 Bore
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Continued on Next Page
54
494
S261
S262
3-163S
3-499S
163
48 LINKS
36 TEETH
18 TEETH
INCLUDES [163], [S288] & [S289] HEAVY DUTY
INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
CHEVROLET (Continued)
Line
No.
85
Part Title
Chain
Cam Sprocket
499
S288
S390
S289
S391
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
350 ENG - 1972-81 - 8 Cyl. - 4.00 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
87
Description
350 ENG - 1967-71 - 8 Cyl. - 4.00 Bore (Continued)
Crank Sprocket
86
Part No
3-163S
3-499S
163
499
S288
S390
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
5.7-L,6,7 (350) ENG - 1982-93 - 8 Cyl. - 4.00 Bore (5.7-L 1982 W & W/O POLICE PKG.) (5.7-6 1983-86
W & W/O POLICE PKG.,1987-88 POLICE PKG. ONLY) (5.7-7 1989-90 POLICE PKG. ONLY,1991-93 W
& W/O POLICE PKG)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-163S
3-499S
3-506SC
163
499
S288
S390
S732
S289
S391
1982-1986 INCLUDES [163], [S288] & [S289] HEAVY DUTY
1982-1986 INCLUDES [499], [S390] & [S391] STANDARD DUTY
1987-1993 INCLUDES [499], [S732] & [S391] STANDARD DUTY
1982-1986 58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
1982-1986 44 TEETH HEAVY DUTY
1982-1986 36 TEETH STANDARD DUTY
1987-1993 36 TEETH STANDARD DUTY
1982-1986 22 TEETH HEAVY DUTY
1982-1993 18 TEETH STANDARD DUTY
88
5.7-N (350N) ENG - 1980-85 - 8 Cyl. - 4.00 Bore (OLDSMOBILE DIESEL)
89
5.7-8 (350) ENG - 1984-92 - 8 Cyl. - 4.000 Bore (1984-91 CORVETTE & 1987-92 CAMARO)
Chain
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
90
180
S503
3-163S
3-499S
3-506SC
163
499
S288
S390
S732
S289
S391
48 LINKS
18 TEETH
1984-1986 INCLUDES [163], [S288] & [S289] HEAVY DUTY
1984-1986 INCLUDES [499], [S390] & [S391] STANDARD DUTY
1987-1992 INCLUDES [499], [S732] & [S391] STANDARD DUTY
1984-1986 58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
1984-1986 44 TEETH HEAVY DUTY
1984-1986 36 TEETH STANDARD DUTY
1987-1992 36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
5.7-8 (350) ENG - 1982 - 8 Cyl. - 4.06 Bore (CORVETTE)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-163S
3-499S
163
499
S288
S390
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
55
CHEVROLET (Continued)
Line
No.
91
Part Title
Part No
5.7-G,S (350) ENG - 1997-04 - 8 Cyl. - 3.90 Bore (GEN III LS1, LS6 CAMARO, CORVETTE)
3pc Set
3-3SRH60SA
Chain
Cam Sprocket
Crank Sprocket
Chain Damper Adapter
Bracket
3SRH60
S878
S827
BD417-BRKT
BD417-DBRKT
92
3pc Set
Cam Sprocket
Crank Sprocket
3-509SA
3-509SB
202
499
499
499
S742
S742
S814
S814
S814
S814
S645
S797
S797
S797
1995-1997 INCLUDES [499], [S797], [S814]
1992-1994 INCLUDES [499], [S797], [S742]
1996 46 LINKS CORVETTE W/M.T.
1992-1995 46 LINKS CORVETTE
1993-1997 46 LINKS CAMARO, CAPRICE, IMPALA
1996 46 LINKS CORVETTE W/A.T.
1992-1993 36 TEETH CORVETTE
1993-1994 36 TEETH CAMARO
1994-1995 36 TEETH CORVETTE
1994-1996 36 TEETH CAPRICE,IMPALA
1995-1997 36 TEETH CAMARO
1996 36 TEETH CORVETTE W/A.T.
1996 18 TEETH CORVETTE W/M.T.
1992-1995 18 TEETH CORVETTE
1993-1997 18 TEETH CAMARO,CAPRICE,IMPALA
1996 18 TEETH CORVETTE W/A.T.
6.0-U (364) OHV ENG - 2005-07 - 8 Cyl. - 4.00 Bore (GEN IV LS2 CORVETTE)
3pc Set
3-3SRH60S
3-3SRH60SA
Chain
Cam Sprocket
Crank Sprocket
3SRH60
3SRH60
3SRH60
S878
S894
S827
S827
S827
Damper
Chain Damper Adapter
Bracket
Continued on Next Page
56
INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT
CAMSHAFT
60 LINKS
44 TEETH; FOR USE W/3BOLT CAMSHAFT
22 TEETH 22 TEETH
ALLOWS THE USE OF THE LS2 TIMING CHAIN DAMPER
[BD417] ON ANY GM LS ENGINE BLOCK NOT ORIGINALLY
EQUIPPED FOR CHAIN DAMPERS; DAMPER NOT INCLUDED
EXCLUDES VVT ENGINES
ALLOWS THE USE OF THE LS2 TIMING CHAIN DAMPER
[BD417] ON ANY GM LS ENGINE BLOCK NOT ORIGINALLY
EQUIPPED FOR CHAIN DAMPERS; INCLUDES [BD417]
DAMPER EXCLUDES VVT ENGINES
5.7-P (350) ENG - 1992-97 - 8 Cyl. - 4.000 Bore (LT1 CAMARO, CAPRICE, CORVETTE, IMPALA)
Chain
93
Description
BD417
BD417
BD417
BD417-BRKT
2007 INCLUDES [3SRH60], [S894] & [S827]; FOR USE W/SINGLE
BOLT CAMSHAFT
2005 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT
CAMSHAFT
2005 60 LINKS FOR USE W/3 BOLT CAM W/1 SENSOR
2006 60 LINKS FOR USE W/3 BOLT CAM W/4 SENSORS
2007 60 LINKS FOR USE W/SINGLE BOLT CAM W/4 SENSORS
2005 44 TEETH; FOR USE W/3BOLT CAMSHAFT
2007 44 TEETH; FOR USE W/SINGLE BOLT CAM
2005 22 TEETH 22 TEETH FOR USE W/3 BOLT CAM W/1
SENSOR
2006 22 TEETH 22 TEETH FOR USE W/3 BOLT CAM W/4
SENSORS
2007 22 TEETH 22 TEETH FOR USE W/SINGLE BOLT CAM W/4
SENSORS
2005 FOR USE W/3 BOLT CAMSHAFT; 1 SENSOR
2006 FOR USE W/3 BOLT CAMSHAFT; 4 SENSORS
2007 FOR USE W/SINGLE BOLT CAMSHAFT; 4 SENSORS
2005-2006 ALLOWS THE USE OF THE LS2 TIMING CHAIN
DAMPER [BD417] ON ANY GM LS ENGINE BLOCK NOT
ORIGINALLY EQUIPPED FOR CHAIN DAMPERS; DAMPER NOT
INCLUDED EXCLUDES VVT ENGINES
CHEVROLET (Continued)
Line
No.
Part Title
Part No
Description
93
6.0-U (364) OHV ENG - 2005-07 - 8 Cyl. - 4.00 Bore (GEN IV LS2 CORVETTE) (Continued)
94
6.2-W (376) OHV ENG - 2008-14 - 8 Cyl. - 4.06 Bore (GEN IV LS3 CORVETTE, CAMARO & SS) NON
SUPERCHARGED
95
Chain Damper Adapter
Bracket
3pc Set
3-3SRH60S
Chain
Cam Sprocket
Crank Sprocket
Damper
3SRH60
S894
S827
BD417
3pc Set
3-171S
3-501S
Chain
168
495
501
S392
S394
S393
S395
Crank Sprocket
3pc Set
Cam Sprocket
Crank Sprocket
3pc Set
Cam Sprocket
Crank Sprocket
99
INCLUDES [168], [S394] & [S395] HEAVY DUTY
INCLUDES [501], [S392] & [S393] STANDARD DUTY; EXC. HI
PERF.
66 LINKS HEAVY DUTY
50 LINKS STANDARD DUTY; W/HI PERF.
50 LINKS STANDARD DUTY; EXC. HI PERF.
38 TEETH STANDARD DUTY; EXC. HI PERF.
50 TEETH HEAVY DUTY
19 TEETH STANDARD DUTY; EXC. HI PERF.
25 TEETH HEAVY DUTY
3-163S
3-499S
163
499
S288
S390
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
402 (400) ENG - 1970-72 - 8 Cyl. - 4 1/8 Bore (BIG BLOCK)
Chain
98
INCLUDES [3SRH60], [S894] & [S827]; FOR USE W/SINGLE
BOLT CAMSHAFT
60 LINKS USE W/SINGLE BOLT CAM W/4 SENSORS
44 TEETH; FOR USE W/SINGLE BOLT CAM
22 TEETH 22 TEETH USE W/SINGLE BOLT CAM W/4 SENSORS
2008-2013
400 ENG - 1970-76 - 8 Cyl. - 4 1/8 Bore (SMALL BLOCK)
Chain
97
ALLOWS THE USE OF THE LS2 TIMING CHAIN DAMPER
[BD417] ON ANY GM LS ENGINE BLOCK NOT ORIGINALLY
EQUIPPED FOR CHAIN DAMPERS; INCLUDES [BD417]
DAMPER EXCLUDES VVT ENGINES
396 ENG - 1965-70 - 8 Cyl. - 4 1/8 Bore
Cam Sprocket
96
BD417-DBRKT
3-171S
3-501S
168
501
S392
S394
S393
S395
INCLUDES [168], [S394] & [S395] HEAVY DUTY
INCLUDES [501], [S392] & [S393] STANDARD DUTY
66 LINKS HEAVY DUTY
50 LINKS STANDARD DUTY
38 TEETH STANDARD DUTY
50 TEETH HEAVY DUTY
19 TEETH STANDARD DUTY
25 TEETH HEAVY DUTY
409 ENG - 1958-65 - 8 Cyl. - 4.31 Bore
Chain
Cam Sprocket
Crank Sprocket
162
494
S261
S262
1962-1965 64 LINKS STANDARD DUTY
48 LINKS W/HIGH PERFORMANCE ENG.
36 TEETH W/HIGH PERFORMANCE ENG.
18 TEETH W/HIGH PERFORMANCE ENG.
427 ENG - 1966-69 - 8 Cyl. - 4.251 Bore
3pc Set
Chain
Cam Sprocket
3-171S
3-501S
168
501
S392
INCLUDES [168], [S394] & [S395] HEAVY DUTY
INCLUDES [501], [S392] & [S393] STANDARD DUTY
66 LINKS HEAVY DUTY
50 LINKS STANDARD DUTY
38 TEETH STANDARD DUTY
Continued on Next Page
57
CHEVROLET (Continued)
Line
No.
99
Part Title
Part No
Description
427 ENG - 1966-69 - 8 Cyl. - 4.251 Bore (Continued)
S394
S393
S395
50 TEETH HEAVY DUTY
19 TEETH STANDARD DUTY
25 TEETH HEAVY DUTY
Chain
3SRH60
2006-2010 60 LINKS
3pc Set
3-171S
3-501S
168
501
S392
S394
S393
S395
INCLUDES [168], [S394] & [S395] HEAVY DUTY
INCLUDES [501], [S392] & [S393] STANDARD DUTY
66 LINKS HEAVY DUTY
50 LINKS STANDARD DUTY
38 TEETH STANDARD DUTY
50 TEETH HEAVY DUTY
19 TEETH STANDARD DUTY
25 TEETH HEAVY DUTY
Cam Sprocket
Crank Sprocket
100 7.0-E (427) OHV ENG - 2006-13 - 8 Cyl. - 4.13 Bore (GEN IV LS7 CORVETTE Z06,427)
101 454 ENG - 1970-76 - 8 Cyl. - 4.251 Bore
Chain
Cam Sprocket
Crank Sprocket
CHRYLSER-INDUSTRIAL
8 Cyl.
Engine
18A,19A,24A,52 & 56
6 Cyl.
Year
Line
8 Cyl.
1
Engine
Year
Line
56A
5
H318
6
30
2
HT318
7
32
3
H361
8
5,5A,6,6A,7,7A,8,8A
4
H383
9
Line
No.
Part Title
Part No
1
18A,19A,24A,52 & 56 ENG - 8 Cyl.
2
30 ENG - 6 Cyl. - 3 1/4 Bore
Chain
Crank Sprocket
Cam Sprocket
Crank Sprocket
348
S274
S265
S127
S266
5,5A,6,6A,7,7A,8,8A ENG - 6 Cyl. - 3 1/4 Bore
5
56A ENG - 8 Cyl. - 3 15/16 Bore
6
7
8
58
Crank Sprocket
Chain
Cam Sprocket
Crank Sprocket
S127
348
S273
S274
348
S274
19 TEETH
68 LINKS
46 TEETH
23 TEETH
68 LINKS
23 TEETH
HT318 ENG - 8 Cyl. - 3.91 Bore
Chain
Crank Sprocket
160
S297
68 LINKS
23 TEETH
H361 ENG - 8 Cyl. - 4 1/8 Bore
Chain
Crank Sprocket
495
S291
11
38 TEETH AFTER SER. #7259
19 TEETH BEFORE SER. #7259
19 TEETH AFTER SER. #7259
H318 ENG - 8 Cyl. - 3.91 Bore
Chain
Crank Sprocket
10
38 TEETH AFTER SER. #7259
19 TEETH BEFORE SER. #7259
19 TEETH AFTER SER. #7259
4
S265
S127
S266
50 LINKS
19 TEETH
Line
H413
68 LINKS
23 TEETH
32 ENG - 6 Cyl. - 3 7/16 Bore
Year
H400
Description
3
Cam Sprocket
Crank Sprocket
Engine
8 Cyl. (Continued)
CHRYLSER-INDUSTRIAL (Continued)
Line
No.
Part Title
Part No
9
H383 ENG - 8 Cyl. - 4 1/4 Bore
10
H400 ENG - 8 Cyl. - 4.342 Bore
11
Description
495
S291
Chain
Crank Sprocket
50 LINKS
19 TEETH
3-501SA
501
S366
3pc Set
Chain
Cam Sprocket
INCLUDES [501], [S366] & [S367]
50 LINKS
38 TEETH
H413 ENG - 8 Cyl. - 4 3/16 Bore
495
S291
Chain
Crank Sprocket
50 LINKS
19 TEETH
CHRYSLER
Year
Line
2.0-C (122) SOHC
2000-02
1
2.7-R,T,U,D (167) DOHC
1998-09
11
2.0-Y (122) DOHC
1995-99
2
3.0-H (181) SOHC
2001-05
12
2.2 (135) SOHC
1982-89
3
3.0-3 (181) SOHC
1988-95
2.2-R (135) DOHC
1989-90
4
3.2-J (197) SOHC
2.2-C (135) SOHC
1990
5
3.3 (201) OHV
2.4 (148) DOHC
1995-10
6
2.4-G (2351CC) SOHC
2001-05
2.5-J,K,V (153) OHC
4 Cyl.
Engine
6 Cyl.
2.5-H,N (152)
4 Cyl.
2.6-D,G,H,N (156) SOHC
Line
No.
Year
Line
331
1954-56
23
5.7-2,H,T(345) OHV
2005-14
24
13
354
1956-58
25
1998-01
14
5.9 (360)
1974-80
26
1990-10
15
5.9 (360)
1971-72
27
3.5-F (215) SOHC
1993-10
16
361
1961-64
28
7
225
1978-83
17
6.1-W (370)
2005-10
29
1986-94
8
3.8-L,P (230) OHV
1991-10
18
383
1959-71
30
4.1 (251)
1942-52
19
392
1957-58
31
1995-00
9
400
1972-78
32
1982-89
Part Title
10
6 Cyl.
Engine
8 Cyl.
Year
Line
Engine
8 Cyl. (Continued)
4.7-N,P (285) SOHC
2007-09
20
413
1959-65
33
301
1955
21
426 WEDGE
1963
34
5.2 (318)
1975-89
22
440
1966-78
35
Part No
Description
1
2.0-C (122) SOHC ENG - 2000-02 - 4 Cyl. - 3.45 Bore (2000 CIRRUS) (00-02 NEON)
2
2.0-Y (122) DOHC ENG - 1995-99 - 4 Cyl. - 3.44 Bore (NON-TURBO) SEBRING
3
Belt
Belt
B-0245
B-0246
2000 112 TEETH CIRRUS
150 TEETH
2.2 (135) SOHC ENG - 1982-89 - 4 Cyl. - 3.444 Bore
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
B-0153
B-071
S458
S616
S417
BT192
BT91
1989 124 TEETH CAMSHAFT
1982-1988 124 TEETH
38 TEETH
1982-1988 40 TEETH
1982-1987 20 TEETH
1989
1982-1988
4
2.2-R (135) DOHC ENG - 1989-90 - 4 Cyl. - 3.444 Bore TC MASERATI
5
2.2-C (135) SOHC - 1990 - 4 Cyl. - 3.44 Bore
Chain
Belt
Crank Sprocket
Balance Shaft Sprocket
Chain Tensioner
Chain
Belt
Crank Sprocket
Balance Shaft Sprocket
Belt Tensioner
201
B-0206
S640
S642
BT298
201
B-0153
S640
S642
BT192
60 LINKS BALANCE SHAFT
131 TEETH
36 TEETH CHAIN
18 TEETH CHAIN
BAL. SHAFT
60 LINKS BALANCE SHAFT
124 TEETH
36 TEETH OUTER
18 TEETH LOWER
59
CHRYSLER (Continued)
Line
No.
6
7
Part Title
Chain
201
Belt
Balance Shaft Sprocket
Chain Tensioner
Chain Guide
B-0265
S642
BT298
BG297
B-0168
B-0232
Timing Kit
B-0114-1
Chain
Belt
201
B-0114
B-0132
B-0153
S714
S640
S709
S642
BT192
BT94
BT298
BG297
Chain Tensioner
Chain Guide
1986-1987 KIT INCLUDES [B-0114], (2) [S714] & [S709]
CAMSHAFT
60 LINKS BALANCE SHAFT
1986-1987 126 TEETH CAMSHAFT
1988 126 TEETH CAMSHAFT
1989-1993 124 TEETH CAMSHAFT
1986-1987 40 TEETH
36 TEETH BALANCE SHAFT CHAIN
1986-1987 20 TEETH CAMSHAFT BELT
18 TEETH
1989-1993 CAMSHAFT
1986-1988 CAMSHAFT
BALANCE SHAFT
BALANCE SHAFT
2.5-H,N (152) ENG - 1995-00 - V6 - 3.29 Bore (SEBRING,CIRRUS) (24 VALVE SOHC MITSUBISHI
ENG)
Belt
Cam Sprocket
Belt Tensioner
Idler
B-0259
S866
BT271
BT5120
BT5121
BT227
187 TEETH
50 TEETH
RIGHT HAND; TENSIONER PULLEY
RIGHT HAND; TENSIONER ARM
RIGHT HAND UPPER; HYDRAULIC TENSIONER
LEFT HAND
2.6-D,G,H,N (156) SOHC ENG - 1982-89 - 4 Cyl. - 91.1 MM Bore (W/BALANCE SHAFT) (G54B
MITSUBISHI ENG) (ENG WAS NOT PRODUCED IN 1986)
Timing Kit
3-102S
3DR102-2
8MMSR90-1
Balance Shaft Elim. Kit
BSEK122
Chain
3DR102
8MMSR90
S407
S455
S567
Crank Sprocket
Balance Shaft Sprocket
Continued on Next Page
60
65 TEETH BALANCE SHAFT BELT
123 TEETH TIMING BELT
2.5-J,K,V (153) OHC ENG - 1986-94 - 4 Cyl. - 3.44 Bore (GAS & FLEX FUEL) INCLUDES
TURBOCHARGED
Balance Shaft Sprocket
Belt Tensioner
10
1995-2006 60 LINKS BALANCE SHAFT CHAIN; EXCLUDES
TURBOCHARGED ENGINES
1995-2006 146 TEETH TIMING BELT
1995-2006 18 TEETH LOWER
1995-2006 BALANCE SHAFT CHAIN TENSIONER
1995-2006 BALANCE SHAFT CHAIN GUIDE
2.4-G (2351CC) SOHC ENG - 2001-05 - 4 Cyl. - 3.41 Bore SEBRING BASE, LX; W/O
TURBOCHARGED ENG
Cam Sprocket
Crank Sprocket
9
Description
2.4 (148) DOHC ENG - 1995-10 - 4 Cyl. - 3.44 Bore (CIRRUS, PT CRUISER, SEBRING, VOYAGER)
INCLUDES VANS
Belt
8
Part No
KIT INCLUDES [3DR102-2] CAMSHAFT KIT & [8MMSR90-1]
BALANCE SHAFT KIT
KIT INCLUDES [3DR102], [S458], [S455], [BD31], [BD30] & [BT49]
(CAMSHAFT KIT)
KIT INCLUDES [8MMSR90], [S407], [S567] (2), [BG48], [BG64] &
[BG51] (BALANCE SHAFT KIT)
1982-1985 KIT INCLUDES CHAIN, OIL PUMP SHAFT PLUG, OIL
GALLEY PLUG, OIL PUMP MOUNTING GASKET AND
INSTRUCTION SHEET FWD ONLY
102 LINKS CAMSHAFT
90 LINKS BAL. SHAFT
34 TEETH OUTER
19 TEETH INNER
17 TEETH (2) REQ.
CHRYSLER (Continued)
Line
No.
10
Part Title
Description
2.6-D,G,H,N (156) SOHC ENG - 1982-89 - 4 Cyl. - 91.1 MM Bore (W/BALANCE SHAFT) (G54B
MITSUBISHI ENG) (ENG WAS NOT PRODUCED IN 1986) (Continued)
Chain Tensioner
Chain Guide
11
Part No
BT49
BD30
BD31
BG48
BG51
BG64
TIMING CHAIN
DAMPER; TENSION SIDE
DAMPER; SLACK SIDE
BAL. SHAFT LOWER LEFT
BAL. SHAFT LOWER RIGHT
BAL. SHAFT UPPER
2.7-R,T,U,D (167) DOHC ENG - 1998-09 - V6 - 3.39 Bore (CONCORDE,INTREPID,SEBRING,300)
INCLUDES FLEX FUEL
Timing Kit
3-397S
3-397SA
3-397SB
3-397SBX
3-397SX
Chain
Cam Sprocket
193
397
S840
S860
S860
S862
Crank Sprocket
Chain Tensioner
S839
BT426
BT426A
BT427
BT506
BT507
MSB-02
Chain Guide
BG423
2000-2002 KIT INCLUDES [397], (2) [193], [S839], [S840], [S860],
[BT426A], (2) [BT427], [BT507], [BG423A], [BG424], [BG425]
(W/SBEC TARGET WHEEL) 2000-01 CONCORDE LH, 2001-02
SEBRING JR
1998-1999 KIT INCLUDES [397], (2) [193], [S839], [S840], [S860],
[BT426A], (2) [BT427], [BT506], [BG423A], [BG424], [BG425]
(W/SBEC TARGET WHEEL) CONCORDE
2002-2007 KIT INCLUDES [397], (2) [193], [S839], [S840], [S862],
[BT426A], (2) [BT427], [BT507], [BG423A], [BG424], [BG425] (W/
NGC TARGET WHEEL) 2002-07 CONCORDE LH, INTREPID LH,
300. 2003-07 SEBRING JR
1998-1999 KIT INCLUDES [397], (2) [193], [BT426A], (2) [BT427],
[BT506], [BG423A], [BG424], [BG425] DOES NOT INCLUDE
SPROCKETS
2000-2007 KIT INCLUDES [397], (2) [193], [BT426A], (2) [BT427],
[BT507], [BG423A], [BG424], [BG425] DOES NOT INCLUDE
SPROCKETS
44 LINKS SECONDARY (2) REQ.; EXCLUDES 2008-09 SEBRING
180 LINKS PRIMARY; EXCLUDES 2008-09 SEBRING
42 TEETH RIGHT HAND; EXCLUDES 2008-09 SEBRING
1998-2001 42 TEETH LEFT HAND; W/SBEC TARGET WHEEL;
CONCORD LH, INTREPID LH
2001-2002 42 TEETH LEFT HAND; W/SBEC TARGET WHEEL;
SEBRING
42 TEETH LEFT HAND; W/NGC TARGET WHEEL; EXCLUDES
2008-09 SEBRING
21 TEETH EXCLUDES 2008-09 SEBRING
OLD DESIGN W/PLASTIC CONSTRUCTION RIGHT LOWER;
TENSIONER ARM; EXCLUDES 2008-09 SEBRING
NEW DESIGN W/ALUMINUM CONSTRUCTION RIGHT LOWER;
TENSIONER ARM; EXCLUDES 2008-09 SEBRING
UPPER SECONDARY TENSIONER; (2) REQUIRED; EXCLUDES
2008-09 SEBRING
1998-1999 PRIMARY TENSIONER
2000-2009 RIGHT PRIMARY HYDRAULIC TENSIONER;
EXCLUDES 2008-09 SEBRING
INCLUDES: 2 MOUNTING BOLTS AND STOP BLOCK
ASSEMBLY TENSIONER ARM STOP BLOCK; PREVENTS CHAIN
BACKLASH; NOTE: USE WHEN REPLACING NEW TIMING
CHAIN AND TENSIONER. DO NOT USE WITH OLD
COMPONENTS
OLD DESIGN W/PLASTIC CONSTRUCTION LEFT LOWER;
EXCLUDES 2008-09 SEBRING
Continued on Next Page
61
CHRYSLER (Continued)
Line
No.
11
Part Title
13
14
15
BG423A
BG424
BG425
NEW DESIGN W/ALUMINUM CONSTRUCTION LEFT LOWER;
EXCLUDES 2008-09 SEBRING
LEFT INNER; EXCLUDES 2008-09 SEBRING
RIGHT INNER; EXCLUDES 2008-09 SEBRING
3.0-H (181) SOHC ENG - 2001-05 - V6 - 3.59 Bore (SEBRING) (6G72 MITSUBISHI ENG SOHC)
Belt
Cam Sprocket
Belt Tensioner
Idler
B-0259
S866
BT271
BT5120
BT5121
BT227
187 TEETH
50 TEETH
RIGHT HAND TENSIONER PULLEY
RIGHT HAND TENSIONER ARM
RIGHT HAND UPPER; HYDRAULIC TENSIONER
LEFT HAND
3.0-3 (181) SOHC ENG - 1988-95 - V6 - 3.587 Bore (6G72 MITSUBISHI ENG)
Belt
Belt Tensioner
B-0139
BT195
149 TEETH
3.2-J (197) SOHC ENG - 1998-01 - V6 - 3.62 Bore (CONCORDE)
Belt
Belt Tensioner
B-0295
BT357
201 TEETH
PULLEY ONLY. DOES NOT INCLUDE BRACKET AND
HYDRAULIC TENSIONER
3.3 (201) OHV ENG - 1990-2010 - V6 - 3.66 Bore (INCLUDES MINIVANS) GAS AND FLEX FUEL
ENGINES
Cam Thrust Plate
MD100
3pc Set
3-3235S
3-388S
Chain
300
388
Cam Sprocket
S788
S934
Crank Sprocket
16
Description
2.7-R,T,U,D (167) DOHC ENG - 1998-09 - V6 - 3.39 Bore (CONCORDE,INTREPID,SEBRING,300)
INCLUDES FLEX FUEL (Continued)
Chain Guide
12
Part No
S715
S927
.297 PLATE THICKNESS FOR USE W/S788 & S934 CAM
SPROCKETS
2006-2010 INCLUDES [300], [S934], [S927] & [MD100]
1990-2004 INCLUDES [388], [S788] & [S715] KIT CONTAINS
SOFTBACK CHAIN; BOLT ON SNUBBER REQUIRED; NOT
PROVIDED
2006-2010 64 LINKS
1990-2005 64 LINKS SOFTBACK CHAIN, REQUIRES BOLT ON
SNUBBER; NOT PROVIDED
1990-2004 40 TEETH USE NEW THRUST PLATE SUPPLIED
W/THIS SPROCKET
2006-2010 40 TEETH USE NEW THRUST PLATE SUPPLIED
W/THIS SPROCKET
1990-2005 20 TEETH
2006-2010 20 TEETH
3.5 (215) SOHC ENG - 1993-10 - V6 - 3.78 Bore (300,300M,CONCORDE,INTREPID,LHS,NEW
YORKER,PROWLER,SEBRING)
Belt
Belt Tensioner
B-0219
B-0255
B-0295
BT357
1993-1994 200 TEETH
1995-1998 202 TEETH
1999-2010 201 TEETH
PULLEY ONLY; DOES NOT INCLUDE BRACKET AND
HYDRAULIC TENSIONER
17
3.7 (225) ENG - 1978-83 - 6 Cyl. - 3.400 Bore
18
3.8-L,P,1 (230) OHV ENG - 1991-2010 - V6 - 3.78 Bore (INCLUDES MINIVANS, PACIFICA)
3pc Set
Chain
Crank Sprocket
Cam Thrust Plate
Continued on Next Page
62
3-495S
495
S291
MD100
INCLUDES [495], [S314] & [S291]
50 LINKS
19 TEETH
.297 PLATE THICKNESS FOR USE W/S788 & S934 CAM
SPROCKETS
CHRYSLER (Continued)
Line
No.
18
Part Title
Part No
Description
3.8-L,P,1 (230) OHV ENG - 1991-2010 - V6 - 3.78 Bore (INCLUDES MINIVANS, PACIFICA)
(Continued)
3pc Set
3-3235S
3-388S
Chain
300
388
Cam Sprocket
S788
S934
Crank Sprocket
S715
S927
2006-2010 INCLUDES [300], [S934], [S927] & [MD100] EXC. 200608 PACIFICA
1991-2004 INCLUDES [388], [S788] & [S715] KIT CONTAINS
SOFTBACK CHAIN, REQUIRES BOLT ON SNUBBER; NOT
PROVIDED
2006-2010 64 LINKS
1991-2005 64 LINKS SOFTBACK CHAIN, REQUIRES BOLT ON
SNUBBER; NOT PROVIDED; EXCLUDES PACIFICA
1991-2004 40 TEETH USE NEW THRUST PLATE SUPPLIED
W/THIS SPROCKET
2006-2010 40 TEETH USE NEW THRUST PLATE SUPPLIED
W/THIS SPROCKET EXC. 2006-08 PACIFICA
1991-2005 20 TEETH EXC. 2005 PACIFICA
2006-2010 20 TEETH EXC. 2006-08 PACIFICA
19
4.1 (251) ENG - 1942-52 - 6 Cyl. - 3.44 Bore (L-HEAD)
20
4.7-N,P (285) SOHC ENG - 2007-09 - 8 Cyl. - 3.66 Bore (ASPEN) MAGNUM GAS-FLEX FUEL
21
22
Crank Sprocket
Chain
Crank Sprocket
Idler Sprocket
Chain Tensioner
Damper
Chain Guide
S127
S127
393
S861
S863
BT419
BT420
BD421
BG422
1942 19 TEETH
1946-1952 19 TEETH
70 LINKS PRIMARY
25 TEETH
2009 50 TEETH PRIMARY
HYD SECONDARY TENSIONER; RIGHT HAND
HYD SECONDARY TENSIONER; LEFT HAND
(2) REQ.
(2) REQ.
4.9 (301) ENG - 1955 - 8 Cyl. - 3 5/8 Bore
Chain
Crank Sprocket
348
S274
68 LINKS
23 TEETH
5.2 (318) ENG - 1975-89 - 8 Cyl. - 3.91 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-160S
3-361S
160
361
S358
S402
S297
S359
INCLUDES [160], [S402] & [S297] W/HEAVY DUTY ROLLER
CHAIN
INCLUDES [361], [S358] & [S359] W/STANDARD DUTY CHAIN
68 LINKS HEAVY DUTY ROLLER CHAIN
68 LINKS STANDARD DUTY CHAIN
46 TEETH USE W/[361] STANDARD DUTY CHAIN
46 TEETH USE W/[160] HEAVY DUTY ROLLER CHAIN
23 TEETH USE W/[160] HEAVY DUTY ROLLER CHAIN
23 TEETH USE W/[361] STANDARD DUTY CHAIN
23
5.4 (331) ENG - 1954-56 - 8 Cyl. - 3 13/16 Bore
24
5.7-2,H,T (345) OHV ENG - 2005-14 - 8 Cyl. - 3.92 Bore (2005-14 300) (2007-09 ASPEN TRUCK) HEMI
25
Chain
Cam Sprocket
Crank Sprocket
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
348
S273
S274
3-704S
704
S896
S889
BT5489
68 LINKS
1956 46 TEETH
23 TEETH
2005-2008 KIT INCLUDES (1) 704, (1) S896, (1) S889, (1) BT5489
2005-2008 86 LINKS
2005-2008 52 TEETH
2005-2008 26 TEETH
2005-2008
5.8 (354) ENG - 1956-58 - 8 Cyl. - 3 15/16 Bore
Chain
Cam Sprocket
348
S273
68 LINKS
46 TEETH
Continued on Next Page
63
CHRYSLER (Continued)
Line
No.
Part Title
Part No
Description
25
5.8 (354) ENG - 1956-58 - 8 Cyl. - 3 15/16 Bore (Continued)
26
5.9 (360) ENG - 1974-80 - 8 Cyl. - 4.00 Bore (CORDOBA 1975-80, LEBARON 1978-79, NEW
YORKER 1977-80, NEWPORT 1974-80, TOWN & COUNTRY 1978-80)
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
27
3-160S
3-361S
160
361
S358
S402
S297
S359
23 TEETH
INCLUDES [160], [S402] & [S297] HEAVY DUTY
INCLUDES [361], [S358] & [S359] STANDARD DUTY
68 LINKS HEAVY DUTY
68 LINKS STANDARD DUTY
46 TEETH USE W/[361] STANDARD DUTY CHAIN
46 TEETH USE W/[160] HEAVY DUTY CHAIN
23 TEETH USE W/[160] HEAVY DUTY CHAIN
23 TEETH USE W/[361] STANDARD DUTY CHAIN
5.9 (360) ENG - 1971-72 - 8 Cyl. - 4.000 Bore (NEWPORT) (ENG NOT USED IN 1973)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
28
S274
3-160S
3-361S
160
361
S358
S402
S297
S359
INCLUDES [160], [S402] & [S297] HEAVY DUTY
INCLUDES [361], [S358] & [S359] STANDARD DUTY
68 LINKS HEAVY DUTY
68 LINKS STANDARD DUTY
46 TEETH USE W/[361] STANDARD DUTY CHAIN
46 TEETH USE W/[160] HEAVY DUTY CHAIN
23 TEETH USE W/[160] HEAVY DUTY CHAIN
23 TEETH USE W/[361] STANDARD DUTY CHAIN
5.9 (361) ENG - 1961-64 - 8 Cyl. - 4 1/8 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-168SA
168
495
S380
S291
S339
INCLUDES [168], [S380] & [S339] H.D.
66 LINKS H.D.
50 LINKS
50 TEETH H.D.
19 TEETH
25 TEETH H.D.
29
6.1-W (370) OHV ENG - 2005-10 - 8 Cyl. - 4.06 Bore (300 CSRT8) HEMI
30
6.3 (383) ENG - 1959-71 - 8 Cyl. - 4 1/4 Bore
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-704S
704
S896
S889
BT5489
3-168SA
3-501SA
168
495
501
S366
S380
S291
S339
S367
2005-2008 KIT INCLUDES (1) 704, (1) S896, (1) S889, (1) BT5489
2005-2008 86 LINKS
2005-2008 52 TEETH
2005-2008 26 TEETH
2005-2008
1959-1971 INCLUDES [168], [S380] & [S339] HEAVY DUTY
1966-1971 INCLUDES [501], [S366] & [S367] STANDARD DUTY
1959-1971 66 LINKS HEAVY DUTY
1959-1965 50 LINKS STANDARD DUTY
1966-1971 50 LINKS STANDARD DUTY
1966-1971 38 TEETH STANDARD DUTY
1959-1971 50 TEETH HEAVY DUTY
1959-1965 19 TEETH STANDARD DUTY
1959-1971 25 TEETH HEAVY DUTY
1966-1971 19 TEETH STANDARD DUTY
31
6.4 (392) ENG - 1957-58 - 8 Cyl. - 4.000 Bore
32
6.6 (400) ENG - 1972-78 - 8 Cyl. - 4.34 Bore
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Continued on Next Page
64
348
S273
S274
3-168SA
3-501SA
168
68 LINKS
46 TEETH
23 TEETH
INCLUDES [168], [S380] & [S339] HEAVY DUTY
INCLUDES [501], [S366] & [S367] STANDARD DUTY
66 LINKS HEAVY DUTY
CHRYSLER (Continued)
Line
No.
32
Part Title
Part No
Description
6.6 (400) ENG - 1972-78 - 8 Cyl. - 4.34 Bore (Continued)
501
S366
S380
S339
S367
Chain
Cam Sprocket
Crank Sprocket
50 LINKS STANDARD DUTY
38 TEETH STANDARD DUTY
50 TEETH HEAVY DUTY
25 TEETH HEAVY DUTY
19 TEETH STANDARD DUTY
33
6.7 (413) ENG - 1959-65 - 8 Cyl. - 4.19 Bore
34
7.0 (426) WEDGE ENG - 1963 - 8 Cyl. - 4 1/4 Bore
495
S291
Chain
Crank Sprocket
3-168SA
168
495
S380
S291
S339
3pc Set
Chain
Cam Sprocket
Crank Sprocket
35
50 LINKS
19 TEETH
INCLUDES [168], [S380] & [S339] H.D.
66 LINKS H.D.
50 LINKS
50 TEETH H.D.
19 TEETH
25 TEETH H.D.
7.2 (440) ENG - 1966-78 - 8 Cyl. - 4.320 Bore
3-168S
3pc Set
INCLUDES [168], [S340] & [S339] HEAVY DUTY; FOR USE W/3
BOLT CAM
INCLUDES [168], [S380] & [S339] HEAVY DUTY; FOR USE
W/SINGLE BOLT CAM
INCLUDES [501], [S366] & [S367] STANDARD DUTY
66 LINKS HEAVY DUTY
50 LINKS STANDARD DUTY
50 TEETH HEAVY DUTY; FOR USE W/3 BOLT CAM
38 TEETH STANDARD DUTY
50 TEETH HEAVY DUTY; FOR USE W/SINGLE BOLT CAM
25 TEETH HEAVY DUTY
19 TEETH STANDARD DUTY
3-168SA
3-501SA
168
501
S340
S366
S380
S339
S367
Chain
Cam Sprocket
Crank Sprocket
CONTINENTAL
4 Cyl.
Engine
Year
Line
Engine
4 Cyl. (Continued)
Year
Line
4CYL-Y112
1
4CYL-F124
2
4CYL-Z120
2
4CYL-F4124,F4140
3
4CYL-Z129
2
4CYL-Y69
4
4CYL-Z134
2
Line
No.
Part Title
Part No
4CYL-Y112 ENG - 4 Cyl. - 3 3/16 Bore
2
4CYL-F124 ENG - 4 Cyl. F135,F140,F162,F163
3
4
5
Cam Gear
Crank Gear
Fan Drive Gear
2620
2660
2603
2675
Year
Line
6CYL-24B
5
6CYL-F6209,F6226
6
Description
1
Cam Gear
6 Cyl.
Engine
56 TEETH OEM #Y400H299
56 TEETH OEM #F400H406
24 TEETH OEM #D600H300
20 TEETH OEM #F209H303
4CYL-F4124,F4140 ENG - 4 Cyl. (& F4162 & F4162A ENGS)
Crank Gear
2603
24 TEETH OEM #D600H300
4CYL-Y69 ENG - 4 Cyl. - 2 3/4 Bore
Gov. Cam Gear
2609
38 TEETH OEM #Y400H312
6CYL-24B ENG - 6 Cyl. (F186,F209,F226,F227,F245 ENGS)
Cam Gear
2620
2652A
2660
56 TEETH OEM #F400403 PLAIN
56 TEETH F227 & F245 (ENG. SPEC. 8128-8124) OEM F400H418
56 TEETH OEM #F400H406
Continued on Next Page
65
CONTINENTAL (Continued)
Line
No.
5
6
Part Title
Part No
Description
6CYL-24B ENG - 6 Cyl. (F186,F209,F226,F227,F245 ENGS) (Continued)
2603
2661
2675
Crank Gear
Fan Drive Gear
24 TEETH OEM #D600H300
28 TEETH OEM #F226H202
20 TEETH OEM #F209H303
6CYL-F6209,F6226 ENG - 6 Cyl.
505
2652
2652A
2660
2603
2661
Chain
Cam Gear
Crank Gear
46 LINKS 3/4" WIDE OEM F600H316
56 TEETH OEM #F209H203
56 TEETH OEM #F400H404
56 TEETH OEM #F400H406
24 TEETH OEM #D600H300
28 TEETH OEM #F226H202
DAEWOO
4 Cyl.
Engine
1588CC DOHC
Line
No.
Year
Line
1999-02
1
Part Title
Engine
4 Cyl. (Continued)
1998CC (Z) DOHC
Year
Line
1999-02
2
Part No
Engine
4 Cyl. (Continued)
2200CC DOHC
Year
Line
1999-02
3
Description
1
1588CC DOHC ENG - 1999-02 - 4 Cyl. - 79 MM Bore (LANOS) (ECOTEC)
2
1998CC (Z) DOHC ENG - 1999-02 - 4 Cyl. - 86.0 MM Bore (NUBIRA) ECOTEC W/OPEL ENG
3
B-0310
Belt
127 TEETH INTERFERENCE ENG APPLICATION
B-0309
Belt
169 TEETH INTERFERENCE ENGINE APPLICATION
2200CC DOHC ENG - 1999-02 - 4 Cyl. - 86 MM Bore (LEGANZA)ECOTEC ENG. OPEL
B-0305
Belt
171 TEETH
DAIHATSU
3 Cyl.
Engine
1.0 (993CC) OHC
Line
No.
Year
Line
1988-92
1
Part Title
Year
Line
1.3 (1295CC) OHC
1989-92
2
1.6 (1589CC) OHC
1990-92
3
4 Cyl.
Engine
Part No
Engine
1.0 (993CC) OHC ENG - 1988-92 - 3 Cyl. - 76 MM Bore (CHARADE)
2
1.3 (1295CC) OHC ENG - 1989-92 - 4 Cyl. - 76 MM Bore (CHARADE 16V ENG)
3
1.6 (1589CC) OHC ENG - 1990-92 - 4 Cyl. - 77 MM Bore (ROCKY 16V ENG)
B-0178
S696
S697
Line
1959-60
6
1989-1992 93 TEETH
B-0182
Belt
Year
1988-1992 91 TEETH
1988-1992 22 TEETH DRIVEN
1988-1992 30 TEETH DRIVER
B-0181
Belt
Line
Description
1
Belt
Oil Pump Sprocket
Year
1990-1992 95 TEETH
DESOTO
6 Cyl.
Engine
251
8 Cyl.
276 OHV
Line
No.
Year
Line
1934-54
1
1952-54
Part Title
Engine
8 Cyl. (Continued)
2
Year
Line
325
1957
3
350
1958
4
361 ENG
1958-61
5
Part No
251 ENG - 1934-54 - 6 Cyl. - 3.44 Bore (S-15, POWERMASTER)
2
276 OHV ENG - 1952-55 - 8 Cyl. - 3 5/8 Bore FIREDOME
66
Chain
Crank Sprocket
S127
348
S274
383
Description
1
Crank Sprocket
Engine
8 Cyl. (Continued)
19 TEETH
68 LINKS
23 TEETH
DESOTO (Continued)
Line
No.
Part Title
Part No
Description
3
325 ENG - 1957 - 8 Cyl. - 3.69 Bore FIRESWEEP
4
350 ENG - 1958 - 8 Cyl. - 4 1/16 Bore
5
348
S273
S274
Chain
Cam Sprocket
Crank Sprocket
495
S291
Chain
Crank Sprocket
50 LINKS
19 TEETH
361 ENG - 1958-61 - 8 Cyl. - 4.13 Bore
3-168SA
168
495
S380
S291
S339
3pc Set
Chain
Cam Sprocket
Crank Sprocket
6
68 LINKS
46 TEETH
23 TEETH
INCLUDES [168], [S380] & [S339] HEAVY DUTY
66 LINKS HEAVY DUTY
50 LINKS STANDARD DUTY
50 TEETH HEAVY DUTY
19 TEETH STANDARD DUTY
25 TEETH USED WITH BOTH STANDARD DUTY AND HEAVY
DUTY CHAINS AND CAM SPROCKETS
383 ENG - 1959-60 - 8 Cyl. - 4 1/4 Bore
495
S291
Chain
Crank Sprocket
50 LINKS
19 TEETH
DETROIT DIESEL
4 Cyl.
Engine
4-53
Line
Engine
6 Cyl. (Continued)
1
6 Cyl.
6-53
Line
No.
Year
1
Part Title
1
6V-53
2
6V-71
2
Part No
6-71N ENG - 6 Cyl. - 4 1/4 Bore
2
6V-71 ENG - 6 Cyl. - 4 1/4 Bore
3
4
Crank Gear
Line
6-71N
1
Crank Gear
Year
2881
2883
8 Cyl.
Engine
Year
Line
8V-71
3
8V-92
4
Description
78 TEETH
78 TEETH
8V-71 ENG - 8 Cyl. - 4 1/4 Bore
Crank Gear
2883
78 TEETH
8V-92 ENG - 8 Cyl. - 4.84 Bore
Crank Gear
2883
78 TEETH OEM #5117102
67
DODGE
4 Cyl.
Engine
Year
Line
1.4 (86)
1979-84
1
1.5-A (Q1500)
1991-94
2
1.5-K,X (Q1500)
1985-90
3
6 Cyl.
Engine
2.5-H,N (152)
4 Cyl.
2.6 (2600) SOHC
Year
Line
1995-00
22
Engine
Year
Line
270
1955-56
40
273
1965-69
41
315
1956
42
8 Cyl. (Continued)
1978-87
23
5.2 (318)
1960-89
43
2.7 (167) DOHC
1998-10
24
325
1957-58
44
6 Cyl.
1.6-Y & Z DOHC
1989-90
4
1.6 (K1600) OHC
1971-77
5
1.6 (K1600) OHC
1978-82
6
170
1960-69
25
5.3 (326)
1959
45
1.6 (K1600) SOHC
1983-88
7
3.0 (181) DOHC
1991-96
26
5.6 (340)
1968-73
46
1.6 (Z1600) OHC
1977-80
8
3.0-3,H (181) SOHC
1987-00
27
5.7-H,2,T (345) OHV
2005-14
47
1.7 (105) OHC
1978-83
9
3.0-H (181) SOHC
2001-05
28
5.7 (350)
1958
48
1.8-T (107) SOHC
1989-90
10
3.0-U (182) SOHC
1990-92
29
5.9 (360)
1971-80
49
1.8-C (112) SOHC
1993-94
11
3.2-J (197) SOHC
1998-01
30
361 OHV
1958-66
50
2.0 (U2000) SOHC
1974-75
12
198
1970-74
31
6.1-3,W (370) OHV
2006-10
51
2.0 (A2000) SOHC
1984-91
13
3.3 (201) OHV
1990-10
32
6.3 (383)
1959-71
52
2.0 (U2000) OHC
1976-77
14
3.5-G,M,V (215) SOHC
2000-10
33
400
1972-78
53
2.0-Y (122) DOHC
1995-99
15
3.5-F (215) SOHC
1993-97
34
413
1959-65
54
2.0-C,F (122) SOHC
1995-05
16
3.7 (225) OHV
1960-83
35
426 WEDGE
1963-65
55
2.2 (135) SOHC
1981-94
17
3.8-L,P,1 (230, 231) OHV
1994-10
36
7.0 (426) HEMI
1966-71
56
2.2-A (135) DOHC
1992-93
18
3.8 (230)
1942-59
37
7.2 (440)
1966-78
57
2.4-B,J,S,X (148) DOHC
1995-07
19
2.4-G (2351) SOHC
2001-05
20
8 Cyl.
3.9 (239)
1953-54
38
8.0-E (488) OHV
1992-02
58
2.5-J,K,V (153) OHC
1986-95
21
241
1953-54
39
Line
No.
Part Title
Part No
Description
1
1.4 (86) ENG - 1979-84 - 4 Cyl. - 74 MM Bore (COLT HATCHBACK VIN CODE J,2,A)
2
1.5-A (Q1500) ENG - 1991-94 - 4 Cyl. - 75.5 MM Bore (1991-94 G15B FOR U.S.) (1991-94 4G15 FOR
CANADA) (OHC MITSUBISHI ENG'S--12 VALVE)
3
Belt
Belt Tensioner
Belt
5
6
Cam Sprocket
Crank Sprocket
Belt Tensioner
92 TEETH
B-0128
B-073
S670
S633
BD33
1987-1990 92 TEETH
1985-1986 92 TEETH
1987-1990 40 TEETH
1987-1990 20 TEETH
1.6-Y & Z DOHC ENG - 1989-90 - 4 Cyl. - 76.9 MM Bore (4G61 MITSUBISHI ENG) (Y NON-TURBO, Z
TURBO)
Belt
Belt Tensioner
B-0165
BT194
151 TEETH
1.6 (K1600) OHC ENG - 1971-77 - 4 Cyl. - 76.9 MM Bore (W/O BALANCE SHAFT-COLT &
CHALLENGER) (G32B FOR U.S./4G32 FOR CANADA) (MITSUBISHI ENG)
Crank Sprocket
Belt Tensioner
Belt Guide
S605
BT56
BG53
1971 18 TEETH
LOOSE SIDE
1.6 (K1600) OHC ENG - 1978-82 - 4 Cyl. - 76.9 MM Bore (W/O BALANCE SHAFT-COLT) (G32B FOR
U.S./4G32 FOR CANADA) (MITSUBISHI ENG)
Oil Pump Sprocket
Belt Tensioner
68
B-0191
92 TEETH
1.5-K,X (Q1500) ENG - 1985-90 - 4 Cyl. - 75.5 MM Bore (1985-88 1.5-K OHC CARB G15B 8 VALVE
U.S.) (1989-90 1.5-X OHC MPI 4G15 8 VALVE CANADA) (MITSUBISHI ENG)
Belt
4
B-073
BD33
S903
BD32
1980-1981 24 TEETH
DODGE (Continued)
Line
No.
7
Part Title
10
Belt
Crank Sprocket
Belt Tensioner
Belt
B-017
S411
BT148
121 TEETH
22 TEETH
B-0158
B-093
BD38
BT160
1990 122 TEETH TIMING BELT
1989 120 TEETH TIMING BELT
BALANCE SHAFT BELT TENSIONER
TIMING BELT TENSIONER
B-0201
121 TEETH
2.0 (U2000) SOHC ENG - 1974-75 - 4 Cyl. - 84 MM Bore (W/O BALANCE SHAFT-COLT) (4G52
MITSUBISHI ENG)
Timing Kit
3DR102-2
Chain
Cam Sprocket
Crank Sprocket
3DR102
S458
S407
S455
BT49
BD30
BD31
KIT INCLUDES [3DR102], [S458], [S455], [BD31], [BD30] & [BT49]
(CAMSHAFT KIT)
102 LINKS CAMSHAFT
38 TEETH
34 TEETH OUTER
19 TEETH INNER
TENSION SIDE
SLACK SIDE
2.0 (A2000) SOHC ENG - 1984-91 - 4 Cyl. - 85 MM Bore (COLT VISTA) (G63B MITSUBISHI ENG)
Belt
Belt Tensioner
14
122 TEETH CAMSHAFT
1977-1980 32 TEETH BAL. SHAFT
CAMSHAFT
BAL. SHAFT
1.8-C (112) SOHC ENG - 1993-94 - 4 Cyl. - 3.19 Bore (W/O BALANCE SHAFT-16 VALVE) (4G93
MITSUBISHI ENG) TURBOCHARGED
Chain Tensioner
Chain Guide
13
B-013
S901
BD32
BD38
1.8-T (107) SOHC ENG - 1989-90 - 4 Cyl. - 3.17 Bore (W/BALANCE SHAFT-COLT 8 VALVE) (4G37
MITSUBISHI ENG) NON-TURBO
Belt Tensioner
12
120 TEETH
24 TEETH 24 TEETH
1983 To 1/87
From 1/87 TO 1988
1.7 (105) OHC ENG - 1978-83 - 4 Cyl. - 3.13 Bore (OMNI & CHARGER)
Belt
11
B-093
S8003
BD32
BT160
1.6 (Z1600) OHC ENG - 1977-80 - 4 Cyl. - 76.9 MM Bore (W/BALANCE SHAFT-RWD-COLT) (G32B
MITSUBISHI ENG)
Belt
Crank Sprocket
Belt Tensioner
9
Description
1.6 (K1600) SOHC ENG - 1983-88 - 4 Cyl. - 76.9 MM Bore (COLT) (G32B FOR U.S./4G32 FOR
CANADA) (MITSUBISHI)
Belt
Oil Pump Sprocket
Belt Tensioner
8
Part No
B-0158
B-089
B-090
BT105
BT106
BT161
From 10/1/86 TO 1991 122 TEETH CAMSHAFT
1984 To 10/1/86 122 TEETH CAMSHAFT
1984 To 3/1/88 55 TEETH BALANCE SHAFT
CAMSHAFT
1984 To 5/87 BALANCE SHAFT
From 5/87 TO 1991 BALANCE SHAFT
2.0 (U2000) OHC ENG - 1976-77 - 4 Cyl. - 84 MM Bore (W/BALANCE SHAFT-COLT) (G52B
MITSUBISHI ENG)
Timing Kit
3-102S
3DR102-2
8MMSR90-1
KIT INCLUDES [3DR102-2] CAMSHAFT KIT & [8MMSR90-1]
BALANCE SHAFT KIT
KIT INCLUDES [3DR102], [S458], [S455], [BD31], [BD30] & [BT49]
(CAMSHAFT KIT)
KIT INCLUDES [8MMSR90], [S407], [S567] (2), [BG48], [BG64] &
[BG51] (BALANCE SHAFT KIT)
Continued on Next Page
69
DODGE (Continued)
Line
No.
14
Part Title
Part No
Description
2.0 (U2000) OHC ENG - 1976-77 - 4 Cyl. - 84 MM Bore (W/BALANCE SHAFT-COLT) (G52B
MITSUBISHI ENG) (Continued)
Balance Shaft Elim. Kit
BSEK122
Chain
3DR102
8MMSR90
S407
S455
S567
BT49
BD30
BD31
BG48
BG51
Crank Sprocket
Balance Shaft Sprocket
Chain Tensioner
Chain Guide
KIT INCLUDES CHAIN, OIL PUMP SHAFT PLUG, OIL GALLEY
PLUG, OIL PUMP MOUNTING GASKET AND INSTRUCTION
SHEET
102 LINKS CAMSHAFT
90 LINKS BAL. SHAFT
34 TEETH OUTER
19 TEETH INNER
17 TEETH (2) REQ.
TENSION SIDE
SLACK SIDE
BAL. SHAFT; LOWER LEFT
BAL. SHAFT; LOWER RIGHT
15
2.0-Y (122) DOHC ENG - 1995-99 - 4 Cyl. - 3.44 Bore
16
2.0-C,F (122) SOHC ENG - 1995-05 - 4 Cyl. - 3.45 Bore (95-05 NEON)(95-00 STRATUS)(SX 2.0
CANADA ONLY)
17
Belt
Belt
Chain
Belt
Balance Shaft Sprocket
Belt Tensioner
19
20
21
Chain Tensioner
Chain Guide
112 TEETH
201
B-0153
B-071
S616
S417
S640
S642
BT192
BT91
BT298
BG297
1990-1994 60 LINKS BALANCE SHAFT
1989-1994 124 TEETH CAMSHAFT
1981-1988 124 TEETH CAMSHAFT
1981-1988 40 TEETH
1981-1987 20 TEETH BELT DRIVE
1990-1994 36 TEETH BALANCE SHAFT
1990-1994 18 TEETH
1989-1994 BELT
1981-1988 BELT
1990-1994 BAL. SHAFT
1990-1994 BAL. SHAFT
2.2-A (135) DOHC ENG. - 1992-93 - 4 Cyl. - 3.44 Bore (DAYTONA IROC R/T) TURBOCHARGED
Chain
Belt
Crank Sprocket
Balance Shaft Sprocket
Chain Tensioner
Chain Guide
201
B-0206
S640
S642
BT298
BG297
60 LINKS BALANCE SHAFT
131 TEETH
36 TEETH FOR USE W/BALANCE SHAFT CHAIN
18 TEETH
BALANCE SHAFT CHAIN TENSIONER
BALANCE SHAFT CHAIN GUIDE
2.4-B,J,S,X (148) DOHC ENG - 1995-07 - 4 Cyl. - 3.44 Bore (CARAVAN,GRAND
CARAVAN,NEON,STRATUS) INCLUDES TURBOCHARGED
Chain
Belt
Balance Shaft Sprocket
Chain Tensioner
Chain Guide
201
B-0265
S642
BT298
BG297
60 LINKS BALANCE SHAFT
146 TEETH CAMSHAFT TIMING BELT
18 TEETH
1995-2006 BAL. SHAFT; EXC. NEON, 2004 CARAVAN
1995-2006 BAL. SHAFT LOWER; EXC. NEON, 2004 CARAVAN
2.4-G (2351CC) SOHC ENG - 2001-05 - 4 Cyl. - 3.41 Bore (STRATUS SE,SXT) 16V
Belt
B-0168
B-0232
65 TEETH BALANCE SHAFT
123 TEETH CAMSHAFT
2.5-J,K,V (153) OHC ENG - 1986-95 - 4 Cyl. - 3.444 Bore (INCLUDES TURBO) (INCLUDES VANS)
Timing Kit
Chain
Continued on Next Page
70
B-0245
150 TEETH
2.2 (135) SOHC ENG - 1981-94 - 4 Cyl. - 3.44 Bore (INCLUDES FRONT WHEEL DRIVE MINIVANS)
Cam Sprocket
Crank Sprocket
18
B-0246
B-0114-1
201
1986-1987 KIT INCLUDES [B-0114], (2) [S714] & [S709]
60 LINKS BALANCE SHAFT
DODGE (Continued)
Line
No.
21
Part Title
Cam Sprocket
Crank Sprocket
Balance Shaft Sprocket
Belt Tensioner
Chain Tensioner
Chain Guide
B-0114
B-0132
B-0153
S714
S640
S709
S642
BT192
BT94
BT298
BG297
Idler
B-0259
S866
BT271
BT5120
BT5121
BT227
187 TEETH
50 TEETH
RIGHT HAND; TENSIONER PULLEY
RIGHT HAND; TENSIONER ARM
RIGHT HAND UPPER; HYDRAULIC TENSIONER
LEFT HAND; IDLER PULLEY
2.6 (2600) SOHC ENG - 1978-87 - 4 Cyl. - 91.1 MM Bore (W/BALANCE SHAFT) (G54B MITSUBISHI
ENG) (INCLUDES MINIVANS)
Timing Kit
3-102S
3DR102-2
8MMSR90-1
Balance Shaft Elim. Kit
BSEK122
Chain
3DR102
8MMSR90
S458
S407
S455
S567
BT49
BD30
BD31
BG48
BG51
BG64
Cam Sprocket
Crank Sprocket
Balance Shaft Sprocket
Chain Tensioner
Chain Guide
24
1986-1987 126 TEETH CAMSHAFT
1988 126 TEETH CAMSHAFT
1989-1995 124 TEETH CAMSHAFT
1986-1987 40 TEETH
36 TEETH CHAIN; OUTER
1986-1987 20 TEETH BELT
18 TEETH LOWER
1989-1995 BELT
1986-1988 BELT
BALANCE SHAFT
BALANCE SHAFT
2.5-H,N (152) ENG - 1995-00 - V6 - 3.29 Bore (AVENGER, STRATUS) (24 VALVE SOHC MITSUBISHI
ENG)
Belt
Cam Sprocket
Belt Tensioner
23
Description
2.5-J,K,V (153) OHC ENG - 1986-95 - 4 Cyl. - 3.444 Bore (INCLUDES TURBO) (INCLUDES VANS)
(Continued)
Belt
22
Part No
KIT INCLUDES [3DR102-2] CAMSHAFT KIT & [8MMSR90-1]
BALANCE SHAFT KIT
KIT INCLUDES [3DR102], [S458], [S455], [BD31], [BD30] & [BT49]
(CAMSHAFT KIT)
KIT INCLUDES [8MMSR90], [S407], [S567] (2), [BG48], [BG64] &
[BG51] (BALANCE SHAFT KIT)
KIT INCLUDES CHAIN, OIL PUMP SHAFT PLUG, OIL GALLEY
PLUG, OIL PUMP MOUNTING GASKET AND INSTRUCTION
SHEET
102 LINKS CAMSHAFT
90 LINKS BAL. SHAFT
38 TEETH
1978-1987 34 TEETH OUTER
1978-1987 19 TEETH INNER
17 TEETH (2) REQ.
1978-1987 TENSION SIDE
LOOSE SIDE
1978-1987 BAL. SHAFT LOWER LEFT
1978-1987 BAL. SHAFT LOWER RIGHT
1978-1987 BAL. SHAFT UPPER
2.7 (167) DOHC ENG - 1998-10 - V6 - 3.38 Bore (AVENGER, CHARGER, INTREPID, MAGNUM,
STRATUS) INCLUDES FLEX FUEL
Timing Kit
3-397S
3-397SA
2000-2002 KIT INCLUDES [397], (2) [193], [S839], [S840], [S860],
[BT426A], (2) [BT427], [BT507], [BG423A], [BG424], [BG425]
(SBEC TARGET WHEEL) 2000-01 INTREPID, 2001-02 STRATUS
1998-1999 KIT INCLUDES [397], (2) [193], [S839], [S840], [S860],
[BT426A], (2) [BT427], [BT506], [BG423A], [BG424], [BG425]
(W/SBEC TARGET WHEEL) INTREPID
Continued on Next Page
71
DODGE (Continued)
Line
No.
24
Part Title
Part No
Description
2.7 (167) DOHC ENG - 1998-10 - V6 - 3.38 Bore (AVENGER, CHARGER, INTREPID, MAGNUM,
STRATUS) INCLUDES FLEX FUEL (Continued)
Timing Kit
3-397SB
3-397SBX
3-397SX
Chain
Cam Sprocket
193
397
S840
S860
S860
S862
Crank Sprocket
Chain Tensioner
S839
BT426
BT426A
BT427
BT506
BT507
MSB-02
Chain Guide
BG423
BG423A
BG424
BG425
2003-2006 KIT INCLUDES [397], (2) [193], [S839], [S840], [S862],
[BT426A], (2) [BT427], [BT507], [BG423A], [BG424], [BG425]
(W/NGC TARGET WHEEL) 2002-04 INTREPID, 2002-06 STRATUS
1998-1999 KIT INCLUDES [397], (2) [193], [BT426A], (2) [BT427],
[BT506], [BG423A], [BG424], [BG425] DOES NOT INCLUDE
SPROCKETS
2000-2007 KIT INCLUDES [397], (2) [193], [BT426A], (2) [BT427],
[BT507], [BG423A], [BG424], [BG425] DOES NOT INCLUDE
SPROCKETS
1998-2007 44 LINKS SECONDARY (2) REQUIRED
1998-2007 180 LINKS PRIMARY
1998-2007 42 TEETH RIGHT HAND
1998-2001 42 TEETH LEFT HAND (SBEC TARGET WHEEL)
INTREPID
2001-2002 42 TEETH LEFT HAND; W/SBEC TARGET WHEEL;
STRATUS
2002-2007 42 TEETH LEFT HAND; W/NGC TARGET WHEEL;
EXCLUDES 2002 STRATUS
1998-2007 21 TEETH
1998-2007 OLD DESIGN W/PLASTIC CONSTRUCTION RIGHT
TENSIONER ARM
1998-2007 NEW DESIGN W/ALUMINUM CONSTRUCTION RIGHT
TENSIONER ARM
1998-2007 SECONDARY TENSIONER; (2) REQUIRED
1998-1999 PRIMARY TENSIONER
2000-2007 PRIMARY HYDRAULIC TENSIONER
INCLUDES: 2 MOUNTING BOLTS AND STOP BLOCK
ASSEMBLY TENSIONER ARM STOP BLOCK; PREVENTS CHAIN
BACKLASH; NOTE: USE WHEN REPLACING NEW TIMING
CHAIN AND TENSIONER. DO NOT USE WITH OLD
COMPONENTS
1998-2007 OLD DESIGN W/PLASTIC CONSTRUCTION LEFT
HAND; LONG
1998-2007 NEW DESIGN W/ALUMINUM CONSTRUCTION LEFT
HAND; LONG
1998-2007 LEFT HAND (SHORT)
1998-2007 RIGHT HAND (SHORT)
25
170 ENG - 1960-69 - 6 Cyl. - 3.400 Bore
26
3.0 (181) DOHC ENG - 1991-96 - V6 - 3.59 Bore (STEALTH 6G72 MITSUBISHI ENG) INC
TURBOCHARGED
27
3pc Set
Chain
Crank Sprocket
Belt
Belt Tensioner
Idler
B-0195
BT271
BT227
INCLUDES [495], [S314] & [S291]
50 LINKS
19 TEETH
257 TEETH
RIGHT HAND
3.0-3,H (181) SOHC ENG - 1987-00 - V6 - 3.59 Bore (INCLUDES MINIVANS) (6G72 12V MITSUBISHI
ENG)
Belt
Belt Tensioner
72
3-495S
495
S291
B-0139
BT195
149 TEETH
DODGE (Continued)
Line
No.
28
29
30
Part Title
Part No
Description
3.0-H (181) SOHC ENG - 2001-05 - V6 - 3.59 Bore (STRATUS) (24V MITSUBISHI ENG)
Belt
Cam Sprocket
Belt Tensioner
Idler
B-0259
S866
BT271
BT5120
BT5121
BT227
187 TEETH
50 TEETH
R.H. PULLEY
TENSIONER ARM
TENSIONER
L.H. PULLEY
3.0-U (182) SOHC ENG - 1990-92 - V6 - 3.587 Bore (MONACO ONLY) (RENAULT ENG)
Chain
Cam Sprocket
3SR44
3SR94
S714
44 LINKS OIL PUMP
94 LINKS TIMING (2) REQ.
40 TEETH LEFT HAND
3.2-J (197) SOHC ENG - 1998-01 - V6 - 3.62 Bore
Belt
Belt Tensioner
B-0295
BT357
201 TEETH
PULLEY ONLY. DOES NOT INCLUDE BRACKET AND
HYDRAULIC TENSIONER
31
198 ENG - 1970-74 - 6 Cyl. - 3.400 Bore
32
3.3 (201) OHV ENG - 1990-10 - V6 - 3.66 Bore (CARAVAN,DYNASTY,GRAND CARAVAN,INTREPID)
GAS,CNG,FLEX FUEL
3pc Set
Chain
Crank Sprocket
3-495S
495
S291
Cam Thrust Plate
MD100
3pc Set
3-3235S
3-388S
Chain
300
388
Cam Sprocket
S788
S934
Crank Sprocket
33
B-0295
BT357
2000-2008 201 TEETH
2001-2003 INTREPID; PULLEY ONLY; DOES NOT INCLUDE
BRACKET AND HYDRAULIC TENSIONER
3.5-F (215) SOHC ENG - 1993-97 - V6 - 3.78 Bore (INTREPID)
Belt
Belt Tensioner
35
.297 PLATE THICKNESS FOR USE W/S788 & S934 CAM
SPROCKETS
2006-2010 INCLUDES [300], [S934], [S927] & [MD100]
1990-2004 INCLUDES [388], [S788] & [S715] KIT CONTAINS
SOFTBACK CHAIN; REQUIRES BOLT ON SNUBBER; NOT
PROVIDED
2006-2010 64 LINKS
1990-2005 64 LINKS SOFTBACK CHAIN; REQUIRES BOLT ON
SNUBBER; NOT PROVIDED
1990-2004 40 TEETH USE NEW THRUST PLATE SUPPLIED
W/THIS SPROCKET
2006-2010 40 TEETH USE NEW THRUST PLATE SUPPLIED
W/THIS SPROCKET
1990-2005 20 TEETH
2006-2010 20 TEETH
3.5-G,M,V (215) SOHC ENG. - 2000-10 - V6 - 3.78 Bore (AVENGER, CHARGER, CHALLENGER,
INTREPID, MAGNUM)
Belt
Belt Tensioner
34
S715
S927
INCLUDES [495], [S314] & [S291]
50 LINKS
19 TEETH
B-0219
B-0255
BT357
1993-1994 200 TEETH
1995-1997 202 TEETH
PULLEY ONLY; DOES NOT INCLUDE BRACKET AND
HYDRAULIC TENSIONER
3.7 (225) OHV ENG - 1960-83 - 6 Cyl. - 3.41 Bore
3pc Set
Chain
Crank Sprocket
3-495S
495
S291
INCLUDES [495], [S314] & [S291]
50 LINKS
19 TEETH
73
DODGE (Continued)
Line
No.
36
Part Title
Part No
Description
3.8-L,P,1 (230, 231) OHV ENG - 1994-2010 - V6 - 3.78 Bore (CARAVAN,GRAND CARAVAN)
Cam Thrust Plate
MD100
3pc Set
3-3235S
3-388S
Chain
300
388
Cam Sprocket
S788
S934
Crank Sprocket
S715
S927
.297 PLATE THICKNESS FOR USE W/S788 & S934 CAM
SPROCKETS
2006-2010 INCLUDES [300], [S934], [S927] & [MD100]
1994-2004 INCLUDES [388], [S788] & [S715] KIT CONTAINS
SOFTBACK CHAIN; REQUIRES BOLT ON SNUBBER; NOT
PROVIDED
2006-2010 64 LINKS
1994-2005 64 LINKS SOFTBACK CHAIN, REQUIRES BOLT ON
SNUBBER (NOT PROVIDED)
1994-2004 40 TEETH USE NEW THRUST PLATE SUPPLIED
W/THIS SPROCKET
2006-2010 40 TEETH USE NEW THRUST PLATE SUPPLIED
W/THIS SPROCKET
1994-2005 20 TEETH
2006-2010 20 TEETH
37
3.8 (230) ENG - 1942-59 - 6 Cyl. - 3.25 Bore INCLUDES VANS
38
3.9 (239) ENG - 1953-54 - 8 Cyl. - 3 7/16 Bore
39
241 ENG - 1953-54 - 8 Cyl. - 3 7/16 Bore
40
41
42
43
Cam Sprocket
Crank Sprocket
Crank Sprocket
Crank Sprocket
Chain
Cam Sprocket
Crank Sprocket
S127
19 TEETH
19 TEETH
348
S273
S274
68 LINKS
46 TEETH
23 TEETH
273 ENG - 1965-69 - 8 Cyl. - 3 5/8 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-361S
361
S358
S359
INCLUDES [361], [S358] & [S359]
68 LINKS
46 TEETH
23 TEETH
315 ENG - 1956 - 8 Cyl. - 3 5/8 Bore
Chain
Cam Sprocket
Crank Sprocket
348
S273
S274
68 LINKS
46 TEETH
23 TEETH
5.2 (318) ENG - 1960-89 - 8 Cyl. - 3.91 Bore
3pc Set
Cam Sprocket
Crank Sprocket
3-160S
3-361S
160
348
361
S273
S358
S402
S274
S297
S359
1965-1989 INCLUDES [160], [S402] & [S297] HEAVY DUTY
1965-1988 INCLUDES [361], [S358] & [S359] STANDARD DUTY
1965-1989 68 LINKS HEAVY DUTY
1960-1964 68 LINKS
1965-1988 68 LINKS STANDARD DUTY
1960-1964 46 TEETH
1965-1988 46 TEETH USE W/361 STANDARD DUTY CHAIN
1965-1989 46 TEETH USE W/160 HEAVY DUTY CHAIN
1960-1964 23 TEETH
1965-1989 23 TEETH USE W/160 HEAVY DUTY CHAIN
1965-1988 23 TEETH USE W/361 STANDARD DUTY CHAIN
325 ENG - 1957-58 - 8 Cyl. - 3 11/16 Bore
Chain
Cam Sprocket
Continued on Next Page
74
S127
1955-1959 38 TEETH
1942 19 TEETH
1946-1954 19 TEETH
1955-1959 19 TEETH
270 ENG - 1955-56 - 8 Cyl. - 3 5/8 Bore
Chain
44
S265
S127
S127
S266
348
S273
68 LINKS
46 TEETH
DODGE (Continued)
Line
No.
Part Title
Part No
Description
44
325 ENG - 1957-58 - 8 Cyl. - 3 11/16 Bore (Continued)
45
5.3 (326) ENG - 1959 - 8 Cyl. - 3.95 Bore
46
47
48
49
Crank Sprocket
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-160S
160
S402
S297
INCLUDES [160], [S402] & [S297]
68 LINKS
46 TEETH
23 TEETH
3-704S
704
S896
S889
BT5489
2005-2008 KIT INCLUDES (1) 704, (1) S896, (1) S889, (1) BT5489
2005-2008 86 LINKS
2005-2008 52 TEETH
2005-2008 26 TEETH
2005-2008
5.7 (350) ENG - 1958 - 8 Cyl. - 4 1/16 Bore
Chain
Crank Sprocket
495
S291
50 LINKS
19 TEETH
5.9 (360) ENG - 1971-80 - 8 Cyl. - 4.000 Bore
3pc Set
Crank Sprocket
3-160S
3-361S
160
361
S358
S402
S297
S359
INCLUDES [160], [S402] & [S297] HEAVY DUTY
INCLUDES [361], [S358] & [S359] STANDARD DUTY
68 LINKS HEAVY DUTY
68 LINKS STANDARD DUTY
46 TEETH USE W/[361] STANDARD DUTY CHAIN
46 TEETH USE W/[160] HEAVY DUTY CHAIN
23 TEETH USE W/[160] HEAVY DUTY CHAIN
23 TEETH USE W/[361] STANDARD DUTY CHAIN
361 OHV ENG - 1958-66 - 8 Cyl. - 4.13 Bore
3pc Set
3-168SA
3-501SA
Chain
168
495
501
S366
S380
S291
S339
S367
Cam Sprocket
Crank Sprocket
52
68 LINKS
46 TEETH
23 TEETH
5.7-H,2,T (345) OHV ENG - 2005-14 - 8 Cyl - 3.92 Bore (MAGNUM R/T,CHALLENGER,CHARGER RT)
HEMI
Cam Sprocket
51
348
S273
S274
23 TEETH
5.6 (340) ENG - 1968-73 - 8 Cyl. - 4.04 Bore (CHALLENGER,CHARGER,CORONET,DART,POLARA)
Chain
50
S274
INCLUDES [168], [S380] & [S339] HEAVY DUTY
1966 INCLUDES [501], [S366] & [S367] STANDARD DUTY; EXC.
RACING ENGS.
66 LINKS HEAVY DUTY
1958-1965 50 LINKS STANDARD DUTY; EXC. RACING ENGS.
1966 50 LINKS STANDARD DUTY; EXC. RACING ENGS.
1966 38 TEETH STANDARD DUTY; EXC. RACING ENGS.
50 TEETH HEAVY DUTY
1958-1965 19 TEETH STANDARD DUTY; EXC. RACING ENGS.
25 TEETH HEAVY DUTY
1966 19 TEETH STANDARD DUTY; EXC. RACING ENGS.
6.1-3,W (370) OHV ENG - 2006-10 - 8 Cyl - 4.06 Bore (MAGNUM, CHALLENGER, CHARGER SRT8)
HEMI
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-704S
704
S896
S889
BT5489
KIT INCLUDES (1) 704, (1) S896, (1) S889, (1) BT5489
86 LINKS
52 TEETH
26 TEETH
6.3 (383) ENG - 1959-71 - 8 Cyl. - 4 1/4 Bore
3pc Set
3-168SA
3-501SA
1959-1971 INCLUDES [168], [S380] & [S339] HEAVY DUTY
1966-1971 INCLUDES [501], [S366] & [S367] STANDARD DUTY
Continued on Next Page
75
DODGE (Continued)
Line
No.
52
Part Title
Chain
Crank Sprocket
3pc Set
Cam Sprocket
Crank Sprocket
1959-1971 66 LINKS HEAVY DUTY
1959-1965 50 LINKS STANDARD DUTY
1966-1971 50 LINKS STANDARD DUTY
1966-1971 38 TEETH STANDARD DUTY
1959-1971 50 TEETH HEAVY DUTY
1959-1965 19 TEETH STANDARD DUTY
1959-1971 25 TEETH HEAVY DUTY
1966-1971 19 TEETH STANDARD DUTY
3-168SA
3-501SA
168
501
S366
S380
S339
S367
INCLUDES [168], [S380] & [S339] HEAVY DUTY
INCLUDES [501], [S366] & [S367] STANDARD DUTY
66 LINKS HEAVY DUTY
50 LINKS STANDARD DUTY
38 TEETH STANDARD DUTY
50 TEETH HEAVY DUTY
25 TEETH HEAVY DUTY
19 TEETH STANDARD DUTY
413 ENG - 1959-65 - 8 Cyl. - 4.19 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
55
168
495
501
S366
S380
S291
S339
S367
400 ENG - 1972-78 - 8 Cyl. - 4.342 Bore
Chain
54
Description
6.3 (383) ENG - 1959-71 - 8 Cyl. - 4 1/4 Bore (Continued)
Cam Sprocket
53
Part No
3-168SA
168
495
S380
S291
S339
1959 INCLUDES [168], [S380] & [S339] SINGLE BOLT CAM
1959 66 LINKS
1960-1965 50 LINKS
1959 50 TEETH
1960-1965 19 TEETH
1959 25 TEETH
426 WEDGE ENG - 1963-65 - 8 Cyl. - 4 1/4 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-168SA
168
495
S380
S291
S339
INCLUDES [168], [S380] & [S339] H.D.
66 LINKS H.D.
50 LINKS
50 TEETH H.D.
19 TEETH
25 TEETH H.D.
56
7.0 (426) HEMI ENG - 1966-71 - 8 Cyl. - 4 1/4 Bore
57
7.2 (440) ENG - 1966-78 - 8 Cyl. - 4.320 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3pc Set
3-168S
168
S340
S339
3-168S
3-168SA
Chain
Cam Sprocket
Crank Sprocket
58
76
3-501SA
168
501
S340
S366
S380
S339
S367
INCLUDES [168], [S340] & [S339]
66 LINKS
50 TEETH W/3 BOLT CAM
25 TEETH
1969-1972 INCLUDES [168], [S340] & [S339] HEAVY DUTY; W/3
BOLT CAM & W/STOCK 3/2BC
INCLUDES [168], [S380] & [S339] HEAVY DUTY; W/SINGLE BOLT
CAM
INCLUDES [501], [S366] & [S367] STANDARD DUTY
66 LINKS HEAVY DUTY
50 LINKS STANDARD DUTY
50 TEETH HEAVY DUTY; W/3 BOLT CAM
38 TEETH STANDARD DUTY
50 TEETH HEAVY DUTY; W/SINGLE BOLT CAM
25 TEETH HEAVY DUTY
19 TEETH STANDARD DUTY
8.0-E (488) OHV ENG - 1992-02 - 10 Cyl - 4.000 Bore VIPER (ACR,R/T-10,GTS,GT2)
Chain
160
1992-1997 68 LINKS
DODGE TRUCK
Year
Line
2.0 (122) SOHC
1979-82
1
2.0 (122) SOHC
1983-89
2
2.2 (135) SOHC
1982-88
3
2.3 (2346CC) SOHC
1983-85
2.4-G (144) SOHC
1993
2.4-W (144) SOHC
1990-92
6
4 Cyl.
Engine
Year
Line
225
1960-87
15
3.7-K (226) SOHC
2002-11
16
230
1942-60
4
3.9 (239) OHV
1987-03
5
8 Cyl.
2.5-P (153) OHV
1996-02
7
2.5 (153) SOHC
1989-95
8
2.6 (2555) SOHC
1979-89
9
6 Cyl.
6 Cyl. (Continued)
241
6 Cyl.
251 & 251 PREM.
8 Cyl.
259
2.8 (170) OHV
1960-69
10
3.0-S (181) SOHC
1989-91
11
3.2 (198)
1970-73
12
218
1942-54
13
218
1935-41
14
Line
No.
1
Engine
Part Title
6 Cyl.
265
4.7-N,J,P (285,287) SOHC
1998-10
25
315
1957-59
26
17
5.2 (318)
1959-03
27
18
331 OHV
1954-56
28
5.7-2,D,T (345) OHV
2003-14
29
354 OHV
1955-59
30
19
1953-68
20
1955-56
21
22
1955-56
23
273
1964-67
24
Part No
8 Cyl. (Continued)
5.9 (360) OHV
1970-03
31
361 OHV
1960-77
32
6.3 (383)
1963-71
33
400
1972-78
34
6.7 (413)
1960-77
35
440 ENG
1972-79
36
1994-03
37
10 Cyl.
8.0-W (488) OHV
Description
2.0 (122) SOHC ENG - 1979-82 - 4 Cyl. - 84 MM Bore (G52B MITSUBISHI ENG)
Timing Kit
3-102S
8MMSR90-1
Balance Shaft Elim. Kit
BSEK122
Chain
3DR102
8MMSR90
S458
S407
S455
S567
BT49
BD30
BD31
BG48
BG51
BG64
Cam Sprocket
Crank Sprocket
Balance Shaft Sprocket
Chain Tensioner
Chain Guide
KIT INCLUDES [3DR102-2] CAMSHAFT KIT & [8MMSR90-1]
BALANCE SHAFT KIT
KIT INCLUDES [3DR102], [S458], [S455], [BD31], [BD30] & [BT49]
(CAMSHAFT KIT)
KIT INCLUDES [8MMSR90], [S407], [S567] (2), [BG48], [BG64] &
[BG51] (BALANCE SHAFT KIT)
KIT INCLUDES CHAIN, OIL PUMP SHAFT PLUG, OIL GALLEY
PLUG, OIL PUMP MOUNTING GASKET AND INSTRUCTION
SHEET
102 LINKS CAMSHAFT
90 LINKS BAL. SHAFT
38 TEETH
34 TEETH OUTER
19 TEETH INNER
17 TEETH (2) REQ.
CAMSHAFT; TENSION SIDE
CAMSHAFT; SLACK SIDE
BALANCE SHAFT; LEFT HAND
BALANCE SHAFT; LOWER RIGHT
BALANCE SHAFT; RIGHT HAND
2.0 (122) SOHC ENG - 1983-89 - 4 Cyl. - 85 MM Bore (W/BALANCE SHAFT) (G63B MITSUBISHI
ENG)
Belt
Belt Tensioner
3
Line
270
3DR102-2
2
Year
1954
1954-60
8 Cyl.
Engine
B-0158
B-089
B-090
BT105
BT106
BT161
From 10/1/86 TO 1989 122 TEETH CAMSHAFT
1983 To 10/1/86 122 TEETH CAMSHAFT
1983 To 3/88 55 TEETH BAL SHAFT
CAMSHAFT
1983 To 5/87 BAL. SHAFT
From 5/87 TO 1989 BAL. SHAFT
2.2 (135) SOHC ENG - 1982-88 - 4 Cyl. - 3.44 Bore (RAMPAGE,DAKOTA) (8V NON TURBO ENG)
(FOR FRONT WHEEL DRIVE MINIVANS SEE CAR SECTION)
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
B-071
S616
S417
BT91
124 TEETH
40 TEETH
20 TEETH
77
DODGE TRUCK (Continued)
Line
No.
4
Part Title
Description
2.3 (2346CC) SOHC ENG - 1983-85 - 4 Cyl. - 90.9 MM Bore (RAM 50, POWER RAM 50)(TURBO
DIESEL) MITS ENG.
Belt
Cam Sprocket
Crank Sprocket
5
Part No
B-091
B-092
S8004
S8005
S8007
163 TEETH CAMSHAFT
83 TEETH BAL. SHAFT
48 TEETH
24 TEETH TIMING
32 TEETH BAL. SHAFT
2.4-G (144) SOHC ENG - 1993 - 4 Cyl. - 86.5 MM Bore (RAM 50) (4G64 MITSUBISHI ENG)
Belt
Belt Tensioner
B-0168
B-0229
BT105
BT197
65 TEETH BAL. SHAFT
123 TEETH CAMSHAFT
CAMSHAFT
BAL. SHAFT
6
2.4-W (144) SOHC ENG - 1990-92 - 4 Cyl. - 86.5 MM Bore (RAM 50) (G64B MITSUBISHI ENG)
7
2.5-P (153) OHV ENG - 1996-02 - 4 Cyl. - 3.88 Bore (DAKOTA) (MAGNUM ENG)
8
2.5 (153) SOHC ENG - 1989-95 - 4 Cyl. - 3.444 Bore (DAKOTA ONLY) (FOR FRONT WHEEL DRIVE
MINIVANS SEE CAR SECTION)
9
Belt
Belt Tensioner
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
Chain
Belt
Crank Sprocket
Balance Shaft Sprocket
Belt Tensioner
Chain Tensioner
Chain Guide
B-0124
BT105
BT161
3-3SR64S
3-3SR64
3SR64
S608
S607
BT167
BG337
201
B-0153
S640
S642
BT192
BT298
BG297
KIT INCLUDES [3SR64], [S607], [S608], [BT167], [BG337]
INCLUDES [3SR64], [S608] & [S607]
64 LINKS
48 TEETH
24 TEETH
DAMPER
60 LINKS BALANCE SHAFT
124 TEETH CAMSHAFT
36 TEETH OUTER
18 TEETH LOWER
TIMING BELT IDLER
BALANCE SHAFT
BALANCE SHAFT
2.6 (2555) SOHC ENG - 1979-89 - 4 Cyl. - 91.1 MM Bore (W/BALANCE SHAFT) (FOR FRONT
WHEEL DRIVE MINIVANS SEE CAR SECTION) (G54B MITSUBISHI ENG)
Timing Kit
3-102S
3DR102-2
8MMSR90-1
Balance Shaft Elim. Kit
BSEK122
Chain
3DR102
8MMSR90
S458
S407
S455
S567
BT49
BD30
BD31
Cam Sprocket
Crank Sprocket
Balance Shaft Sprocket
Chain Tensioner
Chain Guide
Continued on Next Page
78
123 TEETH CAMSHAFT
CAMSHAFT
BAL. SHAFT
KIT INCLUDES [3DR102-2] CAMSHAFT KIT & [8MMSR90-1]
BALANCE SHAFT KIT
KIT INCLUDES [3DR102], [S458], [S455], [BD31], [BD30] & [BT49]
(CAMSHAFT KIT)
KIT INCLUDES [8MMSR90], [S407], [S567] (2), [BG48], [BG64] &
[BG51] (BALANCE SHAFT KIT)
KIT INCLUDES CHAIN, OIL PUMP SHAFT PLUG, OIL GALLEY
PLUG, OIL PUMP MOUNTING GASKET AND INSTRUCTION
SHEET
102 LINKS CAMSHAFT
90 LINKS BAL. SHAFT
38 TEETH
1979-1989 34 TEETH OUTER
1979-1989 19 TEETH INNER
17 TEETH (2) REQ.
1979-1989 TENSION SIDE
LOOSE SIDE
DODGE TRUCK (Continued)
Line
No.
9
Part Title
11
12
13
14
15
BG48
BG51
BG64
1979-1989 BAL. SHAFT LOWER LEFT
1979-1989 BAL. SHAFT LOWER RIGHT
1979-1989 BAL. SHAFT UPPER
2.8 (170) OHV ENG - 1960-69 - 6 Cyl. - 86.5 MM Bore (SERIES A100,D100,P100,P200) (INCLUDES
VANS)
3pc Set
Chain
Crank Sprocket
3-495S
495
S291
INCLUDES [495], [S314] & [S291]
50 LINKS
19 TEETH
3.0-S (181) SOHC ENG - 1989-91 - V6 - 3.59 Bore (1989 RAIDER) (1990-91 RAM 50) (6G72
MITSUBISHI ENG)
Belt
Belt Tensioner
B-0139
BT195
149 TEETH
3.2 (198) ENG - 1970-73 - 6 Cyl. - 3.40 Bore (SERIES 100,200,300) INCLUDES VANS
3pc Set
Chain
Crank Sprocket
3-495S
495
S291
INCLUDES [495], [S314] & [S291]
50 LINKS
19 TEETH
218 ENG - 1942-54 - 6 Cyl. - 3.250 Bore
Crank Sprocket
S127
19 TEETH
218 ENG - 1935-41 - 6 Cyl. - 3.250 Bore
Crank Sprocket
S127
19 TEETH
225 ENG - 1960-87 - 6 Cyl. - 3.40 Bore (SERIES 100,200,300)
3pc Set
Chain
Crank Sprocket
16
Description
2.6 (2555) SOHC ENG - 1979-89 - 4 Cyl. - 91.1 MM Bore (W/BALANCE SHAFT) (FOR FRONT
WHEEL DRIVE MINIVANS SEE CAR SECTION) (G54B MITSUBISHI ENG) (Continued)
Chain Guide
10
Part No
3-495S
168
495
S291
S339
INCLUDES [495], [S314] & [S291] EXC. PREMIUM ENG.
1963-1977 66 LINKS PREMIUM ENG.
50 LINKS EXC. PREMIUM ENG.
19 TEETH EXC. PREMIUM ENG.
1963-1977 25 TEETH PREMIUM ENG.
3.7-K (226) SOHC ENG - 2002-11 - V6 - 3.66 Bore (2004-10 DAKOTOA) (2004-09 DURANGO)
(NITRO 2007-11) (RAM 1500 2002-10)
Timing Kit
3-393SA
3-393SB
3-393SD
Chain
Cam Sprocket
Crank Sprocket
Idler Sprocket
Chain Tensioner
Chain Guide
194
393
S824
S832
S868
S861
S863
BT418
BT431
BT432
BT433
BG434
BG435
2002-2003 KIT INCLUDES [393], (2) [194], [S861], [S824], [S832],
[BT418], [BT431], [BT432], (2) [BT433], [BG434], [BG435], [S863]
(WITH JTEC CAM SPROCKET)
KIT INCLUDES [393], (2) [194], [BT418], [BT431], [BT432], (2)
[BT433], [BG434], [BG435] SAME AS 3-393SA LESS SPROCKETS
2004-2011 KIT INCLUDES [393], (2) [194], [S824], [S868], [S861],
[S863], [BT418], [BT431], [BT432], (2) [BT433], [BG434], [BG435]
(WITH NGC CAM SPROCKET)
94 LINKS SECONDARY (2) REQUIRED
70 LINKS PRIMARY
26 TEETH LEFT HAND
2002-2003 26 TEETH RIGHT HAND W/JTEC SPROCKET
2004-2011 26 TEETH RIGHT HAND W/NGC SPROCKET
25 TEETH
50 TEETH PRIMARY; DOES NOT INCLUDE IDLER GEAR SHAFT
PRIMARY
SECONDARY RIGHT
SECONDARY LEFT; EXCLUDES 2008-10 DAKOTA
SECONDARY ARM (2) REQUIRED
SECONDARY RIGHT
SECONDARY LEFT
79
DODGE TRUCK (Continued)
Line
No.
Part Title
Part No
Description
17
230 ENG - 1942-60 - 6 Cyl. - 3.25 Bore TRUCKS ONLY
18
3.9-M,X (239) OHV ENG - 1987-03 - V6 - 3.91 Bore (DAKOTA,DURANGO,RAM 1500,RAM 1500
VAN,D SERIES,B SERIES,W SERIES)
Cam Sprocket
Crank Sprocket
3pc Set
S265
S127
S266
3-160S
3-380S
3-380SA
Chain
Cam Sprocket
Crank Sprocket
19
20
Chain Tensioner
160
380
S402
S712
S297
S721
BT428
1955-1960 38 TEETH
1942-1954 19 TEETH
1955-1960 19 TEETH
1987-1990 INCLUDES [160], [S402] & [S297] ROLLER TYPE
CHAIN
1998-2003 INCLUDES [380], [S712] & [S721] SILENT TYPE CHAIN
1991-1997 INCLUDES [380], [S712], [S721] & [BT428] SILENT
TYPE CHAIN; INCLUDES TENSIONER
1987-1990 68 LINKS ROLLER TYPE CHAIN
1991-2003 68 LINKS SILENT TYPE CHAIN
1987-1990 46 TEETH
1991-2003 46 TEETH
1987-1990 23 TEETH
1991-2003 23 TEETH
1991-2003
241 ENG - 1954 - 8 Cyl. - 3 7/16 Bore (C1B,C1C AFTER VT-334-9128,C1D AFTER VT-338-2117)
Chain
Crank Sprocket
348
S274
68 LINKS
23 TEETH
251 & 251 PREM. ENG - 1953-68 - 6 Cyl. - 3 7/16 Bore
Chain
Cam Sprocket
Crank Sprocket
494
S265
S127
S266
S303
1959-1968 48 LINKS
1955-1958 38 TEETH
1953-1954 19 TEETH
1955-1958 19 TEETH
1959-1968 19 TEETH
21
259 ENG - 1955-56 - 8 Cyl. - 3.5625 Bore
22
265 ENG - 1954-60 - 6 Cyl. - 3.44 Bore (1954-60 TRUCK, 1957-60 D300,W300, 1960 WM
POWERWAGON) L-HEAD
Chain
Chain
Cam Sprocket
Crank Sprocket
160
494
S265
S127
S266
S303
1955-1956 68 LINKS
1959-1960 48 LINKS
1955-1958 38 TEETH
1954 19 TEETH
1955-1958 19 TEETH
1959-1960 19 TEETH
23
270 ENG - 1955-56 - 8 Cyl. - 3.625 Bore
24
273 ENG - 1964-67 - 8 Cyl. - 3 5/8 Bore (SERIES A100 INCLUDES VANS)
25
Chain
3pc Set
Chain
Cam Sprocket
Crank Sprocket
160
3-361S
361
S358
S359
INCLUDES [361], [S358] & [S359]
68 LINKS
46 TEETH
23 TEETH
4.7-N,J,P (285,287) SOHC ENG - 1998-10 - 8 Cyl. - 3.66 Bore (DAKOTA, DURANGO, RAM 1500)
Timing Kit
3-393S
3-393S
Continued on Next Page
80
68 LINKS
1998-2002 KIT INCLUDES [393], (2) [394], [S852], [S854], [S861],
[S863], [S865], [BT418], [BT419], [BT420], (2) [BD421], (2) [BG422]
DURANGO, RAM 1500; W/JTEC CAM SPROCKET
2000-2001 KIT INCLUDES [393], (2) [394], [S852], [S854], [S861],
[S863], [S865], [BT418], [BT419], [BT420], (2) [BD421], (2) [BG422]
DAKOTA; W/JTEC CAM SPROCKET
DODGE TRUCK (Continued)
Line
No.
25
Part Title
Part No
4.7-N,J,P (285,287) SOHC ENG - 1998-10 - 8 Cyl. - 3.66 Bore (DAKOTA, DURANGO, RAM 1500)
(Continued)
Timing Kit
3-393SC
3-393SX
Chain
Cam Sprocket
393
394
S852
S854
S854
Crank Sprocket
Idler Sprocket
Chain Tensioner
26
Damper
Chain Guide
S870
S861
S863
S865
BT418
BT419
BT420
BD421
BG422
2003-2008 KIT INCLUDES [393], (2) [394], [S852], [S870], [S861],
[BT418], [BT419], [BT420], (2) [BD421], (2) [BG422], [S863], [S865]
W/NGC CAM SPROCKET; DOES NOT INCLUDE INSTALLATION
BOLTS
1998-2008 KIT INCLUDES [393], (2) [394], [BT418], [BT419],
[BT420], (2) [BD421], (2) [BG422] NOTE; THIS KIT DOES NOT
CONTAIN SPROCKETS
1998-2008 70 LINKS PRIMARY
1998-2008 53 LINKS SECONDARY; (2) REQ.
1998-2008 30 TEETH LEFT HAND
1998-2002 30 TEETH DURANGO, RAM 1500; RIGHT HAND;
W/JTEC TARGET WHEEL
2000-2001 30 TEETH DAKOTA; RIGHT HAND; W/JTEC TARGET
WHEEL
2003-2008 30 TEETH RIGHT HAND; W/NGC TARGET WHEEL
25 TEETH
1998-2008 50 TEETH PRIMARY
1998-2008 30 TEETH SECONDARY
PRIMARY TENSIONER
HYD SECONDARY TENSIONER; RIGHT HAND
HYD SECONDARY TENSIONER; LEFT HAND
SECONDARY TENSIONER ARM; (2) REQUIRED
(2) REQUIRED
315 ENG - 1957-59 - 8 Cyl. - 3 5/8 Bore (68 SERIES-D100,D200,D300,DL300,P300,PL300,W100,W20)
Chain
Crank Sprocket
27
Description
160
348
S274
S297
68 LINKS W/HYD. LIFTERS
68 LINKS W/MECH. LIFTERS
23 TEETH W/MECH. LIFTERS
23 TEETH W/HYD. LIFTERS
5.2 (318) OHV ENG - 1959-03 - 8 Cyl. - 3.91 Bore (INCLUDES VANS)
3pc Set
Chain
3-160S
3-361S
3-380S
160
160
160
348
348
Cam Sprocket
Crank Sprocket
361
361
380
S358
S402
S712
S274
S274
S297
1968-1991 INCLUDES [160], [S402] & [S297] W/ROLLER CHAIN
1969-1989 INCLUDES [361], [S358] & [S359] W/SILENT TYPE
CHAIN
1990-2003 INCLUDES [380], [S712] & [S721]
1959-1962 68 LINKS ROLLER CHAIN W/.865" WIDTH; USE
W/HYD. LIFTERS
1963-1967 68 LINKS W300 SERIES; ROLLER CHAIN W/.865"
WIDTH;
1969-1991 68 LINKS ROLLER CHAIN
1959-1962 68 LINKS SILENT CHAIN W/.637" WIDTH; USE
W/MECH. LIFTERS
1963-1967 68 LINKS EXC. .637" WIDTH CHAIN & W300 SERIES;
SILENT CHAIN
1963-1968 68 LINKS 100/200 W/.637" WIDTH CHAIN.
1969-1988 68 LINKS SILENT CHAIN
1990-2003 68 LINKS SILENT TYPE CHAIN
1969-1989 46 TEETH USE W/361 SILENT CHAIN
1968-1991 46 TEETH USE W/160 ROLLER CHAIN
1990-2003 46 TEETH W/SILENT TYPE CHAIN
1959-1962 23 TEETH FOR USE W/MECH. LIFTERS ONLY
1963-1968 23 TEETH EXC. APPLICATIONS REQUIRING .637"
WIDTH CHAIN & W300 SERIES,W300 PICKUP
1959-1962 23 TEETH FOR USE W/HYD. LIFTERS ONLY
Continued on Next Page
81
DODGE TRUCK (Continued)
Line
No.
Part Title
Part No
Description
27
5.2 (318) OHV ENG - 1959-03 - 8 Cyl. - 3.91 Bore (INCLUDES VANS) (Continued)
28
331 OHV ENG - 1954-56 - 8 Cyl. - 3 .81 Bore
29
5.7-2,D,T (345) OHV ENG - 2003-14 - 8 Cyl. - 3.92 Bore (DURANGO,RAM 1500,RAM 2500,RAM
3500) (RAM 4000 - MEXICO) HEMI
30
31
Crank Sprocket
Gear Set
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Gear Set
3pc Set
Crank Sprocket
3pc Set
Chain
Crank Sprocket
3504S
INCLUDES [3502] & [3503]
3-160S
3-361S
3-380S
160
361
380
S358
S402
S712
S297
S359
S721
1970-1989 INCLUDES [160], [S402] & [S297] HEAVY DUTY
1970-1988 INCLUDES [361], [S358] & [S359] STANDARD DUTY
1990-2003 INCLUDES [380], [S712] & [S721]
1971-1989 68 LINKS HEAVY DUTY
1970-1988 68 LINKS STANDARD DUTY
1990-2003 68 LINKS SILENT TYPE CHAIN
1970-1988 46 TEETH USE W/361 STANDARD DUTY CHAIN
1970-1989 46 TEETH USE W/160 HEAVY DUTY CHAIN
1990-2003 46 TEETH USE W/380 SILENT TYPE CHAIN
1970-1989 23 TEETH USE W/160 HEAVY DUTY CHAIN
1970-1988 23 TEETH USE W/361 STANDARD DUTY CHAIN
1990-2003 23 TEETH USE W/380 SILENT TYPE CHAIN
3-168S
168
168
3512S
S340
S432
S339
S339
1972-1977 INCLUDES [168], [S340] & [S339] W/361-4 ENG.
1960-1965 66 LINKS
1972-1977 66 LINKS W/361-2, 3 & 4 ENGS.
1960-1971 INCLUDES [3512] & [3507] 500 & 600
1972-1977 50 TEETH W/361-4 ENG.
1972-1977 50 TEETH W/361-3 ENG.
1960-1965 25 TEETH
1972-1977 25 TEETH W/361-2, 3 & 4 ENGS.
6.3 (383) ENG - 1963-71 - 8 Cyl. - 4.188 Bore (SERIES 100,200,300)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-168SA
3-501SA
168
501
S366
S380
S339
S367
INCLUDES [168], [S380] & [S339] HEAVY DUTY
INCLUDES [501], [S366] & [S367] STANDARD DUTY
66 LINKS HEAVY DUTY
50 LINKS STANDARD DUTY
38 TEETH STANDARD DUTY
50 TEETH HEAVY DUTY
25 TEETH HEAVY DUTY
19 TEETH STANDARD DUTY
400 ENG - 1972-78 - 8 Cyl. - 4.34 Bore SERIES 100,200,300,RAMCHARGER (INCLUDES VANS)
3pc Set
Chain
Cam Sprocket
Continued on Next Page
82
2003-2008 KIT INCLUDES (1) 704, (1) S896, (1) S889, (1) BT5489
2003-2008 86 LINKS
2003-2008 52 TEETH
2003-2008 26 TEETH
2003-2008
361 OHV ENG - 1960-77 - 8 Cyl. - 4.13 Bore
Gear Set
Cam Sprocket
34
3-704S
704
S896
S889
BT5489
INCLUDES [3502] & [3503]
5.9 (360) OHV ENG - 1970-03 - 8 Cyl. - 4.00 Bore (INCLUDES VANS)
Cam Sprocket
33
3504S
1963-1968 23 TEETH W300 SERIES,W300 PICKUP
1969-1989 23 TEETH FOR USE W/160 CHAIN
1965-1989 23 TEETH FOR USE W/361 CHAIN
1990-2003 23 TEETH FOR USE W/380 CHAIN
354 OHV ENG - 1955-59 - 8 Cyl. - 3.94 Bore (BASE TRUCK)
Chain
32
S297
S297
S359
S721
3-168SA
3-501SA
168
501
S366
INCLUDES [168], [S380] & [S339] HEAVY DUTY
INCLUDES [501], [S366] & [S367] STANDARD DUTY
66 LINKS HEAVY DUTY
50 LINKS STANDARD DUTY
38 TEETH STANDARD DUTY
DODGE TRUCK (Continued)
Line
No.
34
Part Title
Part No
400 ENG - 1972-78 - 8 Cyl. - 4.34 Bore SERIES 100,200,300,RAMCHARGER (INCLUDES VANS)
(Continued)
S380
S339
S367
Cam Sprocket
Crank Sprocket
35
3-168S
168
S432
S339
S339
1972-1977 INCLUDES [168], [S340] & [S339] MEDIUM DUTY
1972-1977 66 LINKS LIGHT DUTY & MEDIUM DUTY
1972-1977 50 TEETH LIGHT DUTY
1960-1965 25 TEETH
1972-1977 25 TEETH LIGHT DUTY & MEDIUM DUTY
440 ENG - 1972-79 - 8 Cyl. - 4.32 Bore (1972-79 SERIES 100-450) (INCLUDES VANS)
3-168SA
3-501SA
168
501
S366
S380
S339
S367
3pc Set
Chain
Cam Sprocket
Crank Sprocket
37
50 TEETH HEAVY DUTY
25 TEETH HEAVY DUTY
19 TEETH STANDARD DUTY
6.7 (413) ENG - 1960-77 - 8 Cyl. - 4.19 Bore (1969-74 MOTOR HOME SERIES R3,4,5, 1960-77
SERIES 600,700,800,900,1000)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
36
Description
INCLUDES [168], [S380] & [S339] HEAVY DUTY
INCLUDES [501], [S366] & [S367] STANDARD DUTY
66 LINKS HEAVY DUTY
50 LINKS STANDARD DUTY
38 TEETH STANDARD DUTY
50 TEETH HEAVY DUTY
25 TEETH HEAVY DUTY
19 TEETH STANDARD DUTY
8.0-W (488) OHV ENG - 1994-03 - V10 - 4.000 Bore (RAM 2500,3500)
380
Chain
68 LINKS
EAGLE
Year
Line
1.5-A SOHC
1991-96
1
1.5-X SOHC
1989-90
2
1.6-Y DOHC
1989-90
3
2.0-Y (122) DOHC
1995-98
9
1.8 (P1800) SOHC
1993-94
4
2.2 (132) SOHC
1988-89
10
1.8 (1834CC)
1992-96
5
2.4-G (144) SOHC
1993-96
11
2.0-D,V (122) SOHC
1989-93
6
2.4-W (144) SOHC
1992
12
4 Cyl.
Engine
Line
No.
Part Title
Engine
Year
Line
2.0-E,R,U (122) DOHC
1990-94
7
2.0-F (122) DOHC
1993-98
8
4 Cyl. (Continued)
Part No
Engine
Year
Line
1988-89
13
3.0-J,U (182) SOHC
1988-92
14
3.3-T,U (201) OHV
1993-97
15
3.5-F (215) SOHC
1993-97
16
4 Cyl. (Continued)
2.5 (150) OHV
6 Cyl.
Description
1
1.5-A SOHC ENG - 1991-96 - 4 Cyl. - 75.5 MM Bore (12 VALVE) (4G15 MITSUBISHI ENG)
2
1.5-X SOHC ENG - 1989-90 - 4 Cyl. - 75.5 MM Bore (MPI 8 VALVE) (4G15 MITSUBISHI ENG)
3
4
Belt
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
B-0191
B-0128
S670
S633
BD33
92 TEETH
92 TEETH
40 TEETH
20 TEETH
1.6-Y DOHC ENG - 1989-90 - 4 Cyl. - 82.3 MM Bore (SUMMIT) (4G61 MITSUBISHI ENG)
Belt
Belt Tensioner
B-0165
BT194
151 TEETH
1.8 (P1800) SOHC ENG - 1990-94 - 4 Cyl. - 3.39 Bore (W/BALANCE SHAFT-TALON-8 VALVE) (4G37
MITSUBISHI ENG)
Belt
Belt Tensioner
B-0158
B-090
BD38
BT160
122 TEETH CAMSHAFT
55 TEETH BAL. SHAFT
BAL. SHAFT
CAMSHAFT
83
EAGLE (Continued)
Line
No.
Part Title
Part No
Description
5
1.8 (1834CC) ENG - 1992-96 - 4 Cyl. - 81 MM Bore (SUMMIT 4G93 SOHC ENG)
6
2.0-D,V (122) SOHC ENG - 1989-93 - 4 Cyl. - 85 MM Bore (2000 GTX, VISTA CANADA) (G63B
MITSUBISHI ENG)
Belt
Belt
Belt Tensioner
7
B-0155
BT106
BT196
Belt Tensioner
B-0167
B-0168
BT194
BT197
BT225
B-0167
B-0168
Belt Tensioner
10
11
122 TEETH CAMSHAFT
BALANCE SHAFT
CAMSHAFT
153 TEETH CAMSHAFT
65 TEETH BALANCE SHAFT
CAMSHAFT
BALANCE SHAFT
LOWER ADJUSTER
2.0-F (122) DOHC ENG - 1993-98 - 4 Cyl. - 3.34 Bore (TALON TSi) EBG MITSUBISHI
TURBOCHARGED ENG.
Belt
9
121 TEETH
2.0-E,R,U (122) DOHC ENG - 1990-94 - 4 Cyl. - 3.34 Bore (TALON, 2000 GTX) (MITSUBISHI ENG)
INC. TURBOCHARGED
Belt
8
B-0201
BT194
BT197
153 TEETH CAMSHAFT BELT; INTERFERENCE ENG.
APPLICATION
65 TEETH BALANCE SHAFT BELT; INTERFERENCE ENG.
APPLICATION
TIMING BELT IDLER; R.H.
BALANCE SHAFT
2.0-Y (122) DOHC ENG - 1995-98 - 4 Cyl. - 3.44 Bore (1996-98 TALON) (1995-98 TALON ESi)
Belt
B-0246
150 TEETH
2.2 (132) SOHC ENG - 1988-89 - 4 Cyl. - 88 MM Bore (RENAULT ENG)
Belt
B-0140
118 TEETH
2.4-G (144) SOHC ENG - 1993-96 - 4 Cyl. - 86.5 MM Bore (SUMMIT) (4G64 MITSUBISHI ENG)
Belt
Belt Tensioner
B-0168
B-0230
BT196
BT197
BT197
65 TEETH BALANCE SHAFT BELT
124 TEETH CAMSHAFT BELT
CAMSHAFT BELT TENSIONER
1993-1994 BALANCE SHAFT BELT TENSIONER
1995-1996 BALANCE SHAFT BELT TENSIONER; EXC. CALIF.
12
2.4-W (144) SOHC ENG - 1992 - 4 Cyl. - 86.5 MM Bore (SUMMIT) (G64B MITSUBISHI ENG)
13
2.5 (150) OHV ENG - 1988-89 - 4 Cyl. - 3.88 Bore (PREMIER)
14
3.0-J,U (182) SOHC ENG - 1988-92 - V6 - 3.587 Bore (1988-92 PREMIER) (RENAULT ENG) (1988 J)
(1989-92 U)
Belt
Belt Tensioner
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
Chain
15
3-3SR64S
3-3SR64
3SR64
S608
S607
BT167
BG337
3SR44
3SR94
123 TEETH CAMSHAFT
BALANCE SHAFT
CAMSHAFT
KIT INCLUDES [3SR64], [S607], [S608], [BT167], [BG337]
INCLUDES [3SR64], [S608] & [S607]
64 LINKS
48 TEETH
24 TEETH
44 LINKS OIL PUMP
94 LINKS TIMING (2) REQ.
3.3-T,U (201) OHV ENG - 1993-97 - V6 - 3.66 Bore (LH SERIES)
Cam Thrust Plate
Continued on Next Page
84
B-0204
BT106
BT196
MD100
.297 PLATE THICKNESS FOR USE W/S788 CAM SPROCKET
EAGLE (Continued)
Line
No.
15
16
Part Title
Part No
Description
3.3-T,U (201) OHV ENG - 1993-97 - V6 - 3.66 Bore (LH SERIES) (Continued)
3pc Set
3-388S
Chain
388
Cam Sprocket
S788
Crank Sprocket
S715
INCLUDES [388], [S788] & [S715] KIT CONTAINS SOFTBACK
CHAIN, REQUIRES BOLT ON SNUBBER (NOT PROVIDED)
64 LINKS SOFTBACK CHAIN. REQUIRES BOLT ON SNUBBER
(NOT PROVIDED)
40 TEETH USE NEW THRUST PLATE SUPPLIED W/THIS
SPROCKET
20 TEETH
3.5-F (215) SOHC ENG - 1993-97 - V6 - 3.78 Bore (LH SERIES)
B-0219
B-0255
BT357
Belt
Belt Tensioner
1993-1994 200 TEETH
1995-1997 202 TEETH
1995-1997 PULLEY ONLY. DOES NOT INCLUDE BRACKET AND
HYDRAULIC TENSIONER
FORD
Year
Line
1.3 (1340CC) OHV
1962-64
1
1.3-K,H (1295CC)
1988-97
2
97 (1598) OHV
1971-73
3
3.0-Y (183) DOHC
1.6 (98) OHV
1978-80
4
3.2-P (192) DOHC
1.6 (98) OHC
1981-85
5
3.3-B,T,X (200)
1.8-8 DOHC
1991-96
6
215
1.9-9 (116) OHC
1985-90
7
1.9-J (116)
1986-96
8
8 Cyl.
2.0-3,5,Z (121) DOHC
1995-04
2.0-H (122) SOHC
2.0-A (122) DOHC
2.0-P (122) SOHC
1997-04
4 Cyl.
Engine
Engine
Year
Line
3.0-S,1,G (182,183) DOHC
1996-12
24
4.6-X (281) SOHC
1996-04
45
3.0-U,1,2 (182) OHV
1986-07
25
4.6-V,W,6,9 (281) SOHC
1992-11
46
1989-95
26
4.6-H (281) SOHC
2005-10
47
1993-95
27
289 OHV
1963-69
48
1963-83
28
292
1955-62
49
1952-53
29
5.0 (302)
1968-95
50
312
1956-57
51
6 Cyl. (Continued)
8 Cyl. (Continued)
Year
Line
221
1962-63
30
5.4-S (330) DOHC
2005-12
52
9
221
1942
31
332
1958-59
53
1984-87
10
1971-72
54
11
6 Cyl.
351C
1993-97
223
1954-64
32
5.8-G,H,M 351W
1969-91
55
12
3.8-3,4,C,R (232) OHV
1982-04
33
351C
1970-74
56
2004-07
34
351 COBRA JET
1971-74
57
351M
1975-79
58
2.0-N,2,9 (121) DOHC
2004-14
13
3.9-6 (238) OHV
122 (2000) OHC
1971-74
14
2.2-C & L (133)
1989-92
15
8 Cyl.
2.3 (140) HSC
1984-94
2.3 (140) SOHC
1974-93
6 Cyl.
Engine
239 L-HEAD
1932-53
35
351M
1985-86
59
16
239 OHV
1954
36
5.8-Z (355) DOHC
2013-14
60
17
6 Cyl.
352 OHV
1958-67
61
37
361
1958-59
62
240
1965-72
144
1960-64
18
4.0-N (245) SOHC
2005-10
38
390
1961-71
63
2.5-B (152) DOHC
1993-97
19
4.1 (250)
1969-80
39
400
1971-78
64
406
1962-63
65
4 Cyl.
2.5-D (153) OHV
1986-91
6 Cyl.
20
8 Cyl.
4.2 (255)
1980-82
40
427
1963-68
66
260 OHV
1962-65
41
428
1966-70
67
2.5-L (155) DOHC
1995-00
21
272
1955-57
42
429
1968-73
68
170
1961-72
22
4.6-R,Y (281) DOHC
2003-04
43
430
1959-60
69
2.8 (171) OHV
1975-79
23
4.6-V (281) DOHC
1996-01
44
460
1972-78
70
Line
No.
1
2
Part Title
Part No
Description
1.3 (1340CC) OHV ENG - 1962-64 - 4 Cyl. - 3.19 Bore (CAPRI, CONSUL) (123E, 124E FORD GREAT
BRITIAN)
Chain
172
46 LINKS
1.3-K,H (1295CC) ENG - 1988-97 - 4 Cyl. - 2.80 Bore (ASPIRE, FESTIVA) (1295CC SOHC)
Belt
Belt Tensioner
B-0141
B-0185
BT164
1988-1993 107 TEETH FESTIVA
1994-1997 107 TEETH ASPIRE
85
FORD (Continued)
Line
No.
Part Title
Part No
Description
3
97 (1598) OHV ENG - 1971-73 - 4 Cyl. - 3 3/16 Bore
4
1.6 (98) OHV ENG - 1978-80 - 4 Cyl. - 3.189 Bore (FIESTA 1598CC)
5
6
7
8
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain
Crank Sprocket
172
S423
INCLUDES [172], [S422] & [S423]
46 LINKS
34 TEETH
17 TEETH
46 LINKS
17 TEETH
1.6 (98) OHC ENG - 1981-85 - 4 Cyl. - 3.147 Bore (ESCORT, EXP)
Belt
Crank Sprocket
Belt Tensioner
Belt Guide
B-067
S419
BT92
BG95
97 TEETH
19 TEETH
1.8-8 DOHC ENG - 1991-96 - 4 Cyl. - 3.270 Bore
Belt
Belt Tensioner
Idler
B-0179
BT213
BT214
145 TEETH
1.9-9 (116) OHC ENG - 1985-90 - 4 Cyl. - 3.230 Bore (1.9-9 2BC 1985-86) (1.9-9 CFI 1987-90)
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
Belt Guide
Timing Cover
B-067
S638
S419
BT92
BG95
MIC200
MOC200
97 TEETH
38 TEETH
19 TEETH
INNER
OUTER
1.9-J (116) ENG - 1986-96 - 4 Cyl. - 3.23 Bore (1.9-J EFI 1986-90) (1.9-J SFI 1991-96) (ESCORT,EXP)
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
Belt Guide
Timing Cover
9
3-172S
172
S422
S423
B-0194
B-067
S638
S419
BT350
BT92
BG95
MIC200
MOC200
From 3/26/91 TO 1996 97 TEETH
1986 To 3/25/91 97 TEETH
1986 To 3/25/91 38 TEETH
1986 To 3/25/91 19 TEETH
1991-1996
1986-1990
1986-1990 INNER
1986-1990 OUTER
2.0-3,5,Z (121) DOHC ENG - 1995-04 - 4 Cyl. - 3.34 Bore (1995-00 CONTOUR, 1998-03 ESCORT,
2000-04 FOCUS - MFI, ZTEC ENG.)
Belt
Belt Tensioner
Idler
B-0258
B-0294
BT5390
BT5409
BT5410
1995-1997 131 TEETH
1998-2004 129 TEETH
1995-1997 TENSIONER
1995-1997 LEFT HAND; IDLER
1995-1997 RIGHT HAND; IDLER
10
2.0-H (122) SOHC ENG - 1984-87 - 4 Cyl. - 3.39 Bore (ESCORT,TEMPO) 8V MAZDA DIESEL ENG
11
2.0-A (122) DOHC ENG - 1993-97 - 4 Cyl. - 3.27 Bore (MFI) (MAZDA ENG) (PROBE)
12
Belt
Belt
B-0228
148 TEETH CAMSHAFT
135 TEETH
2.0-P (122) SOHC ENG - 1997-04 - 4 Cyl. - 3.34 Bore (1997-02 ESCORT, 2000-04 FOCUS) (SPLIT
PORT INJECTION)
Belt
Belt Tensioner
Belt Guide
86
B-0103
B-0283
BT5406
BG95
99 TEETH
1997-2002
FORD (Continued)
Line
No.
13
Part Title
Part No
Description
2.0-N,2,9 (121) DOHC ENG - 2004-14 - 4 Cyl. - 3.44 Bore (SFI) (FOCUS, MONDEO (MEXICO) &
TRANSIT CONNECT) 16V DURATEC GAS/FLEX
Timing Kit
3-727S
Chain
706F
727F
S898
S891
S893
BT452
BT5514
BT5555
BG449
BG5556
Cam Sprocket
Crank Sprocket
Oil Pump Sprocket
Chain Tensioner
Chain Guide
2004-2011 INCLUDES [727F], [706F], (2) [S898], [S891], [S893],
[BT452], [BT5514], [BT5555], [BG449], [BG5556]
2004-2011 54 LINKS OIL PUMP CHAIN
2004-2011 134 LINKS TIMING CHAIN
2004-2013 2 REQ.
2004-2013
2004-2011 24 TEETH
2004-2011 OIL PUMP CHAIN TENSIONER
2004-2013 TIMING CHAIN TENSIONER; RIGHT UPPER
2004-2011 TIMING CHAIN TENSIONER ARM
2004-2011 OIL PUMP CHAIN GUIDE
2004-2013 TIMING CHAIN GUIDE; LEFT UPPER
14
122 (2000) OHC ENG - 1971-74 - 4 Cyl. - 3.575 Bore (PINTO)
15
2.2-C & L (133) ENG - 1989-92 - 4 Cyl. - 3.390 Bore (SOHC 2.2-C NON-TURBO) (SOHC 2.2-L
TURBO)
16
17
Belt
Belt Tensioner
Belt
Belt Tensioner
Idler
19
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
110 TEETH
3-505SA
3-505S
505
S618
S617
BT127
KIT INCLUDES [505], [S617], [S618], [BT127]
INCLUDES [505], [S617] & [S618]
46 LINKS
36 TEETH
18 TEETH
2.3 (140) SOHC ENG - 1974-93 - 4 Cyl. - 3.78 Bore (VIN CODES 6,A,M,T,W,Y) (INCLUDES TURBO
CHARGED)
Cam Sprocket
Crank Sprocket
Timing Cover
B-014
B-0210
S446
S447
MIC100
1974-1992 129 TEETH
1993 129 TEETH
1974-1992 38 TEETH
1974-1992 19 TEETH
1974-1990 INNER
144 ENG - 1960-64 - 6 Cyl. - 3 1/2 Bore
Cam Thrust Plate
3pc Set
Chain
Cam Sprocket
Crank Sprocket
MF108
3-351S
351
S308
S397
INCLUDES [351], [S308] & [S397]
50 LINKS
38 TEETH
19 TEETH
2.5-B (152) DOHC ENG - 1993-97 - V6 - 3.33 Bore (MFI) (MAZDA ENG)
Belt
Belt Tensioner
Idler
20
B-0134
BT166
BT215
122 TEETH CAMSHAFT
2.3 (140) OHV ENG - 1984-94 - 4 Cyl. - 3.70 Bore (VIN CODES R,S & X) W/HSC & HSC-HIGH
OUTPUT
Belt
18
B-013
BT10
B-0214
BT129
BT324
BT128
BT325
192 TEETH
ARM
W/O ARM
LOWER
UPPER
2.5-D (153) OHV ENG - 1986-91 - 4 Cyl. - 3.70 Bore (TAURUS) HSC
Timing Kit
3pc Set
3-505SA
3-505S
KIT INCLUDES [505], [S617], [S618], [BT127]
INCLUDES [505], [S617] & [S618]
Continued on Next Page
87
FORD (Continued)
Line
No.
Part Title
Part No
Description
20
2.5-D (153) OHV ENG - 1986-91 - 4 Cyl. - 3.70 Bore (TAURUS) HSC (Continued)
21
2.5-G,L (155) DOHC ENG - 1995-00 - V6 - 3.24 Bore (CONTOUR) DURATEC 24V MFI
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Timing Kit
3-392S
Chain
Crank Sprocket
Chain Tensioner
392
S833
BT406
BT408A
BG409
BG410
Chain Guide
22
23
24
505
S618
S617
BT127
1996-2000 KIT INCLUDES (2) [392], [S833], (2) [BT406], (2)
[BT408A], [BG409], [BG410] (NOTE: CAMSHAFT SPROCKETS
ARE INTEGRATED ONTO THE CAMSHAFTS)
61 LINKS 2 REQ.
18 TEETH
1996-2000 2 REQ.; HYD. TENSIONER
1996-2000 2 REQ.; TENSIONER ARM
LEFT HAND
1996-2000 RIGHT HAND
170 ENG - 1961-72 - 6 Cyl. - 3 1/2 Bore
Cam Thrust Plate
3pc Set
Chain
Cam Sprocket
Crank Sprocket
MF108
3-351S
351
S308
S397
INCLUDES [351], [S308] & [S397]
50 LINKS
38 TEETH
19 TEETH
2.8 (171) OHV ENG - 1975-79 - V6 - 3.661 Bore
Gear Set
2760SA
REPLACE AS A SET ONLY
3.0-S,1,G (182,183) DOHC ENG - 1996-2012 - V6 - 3.500 Bore (TAURUS,FREESTYLE,FORD
500,FUSION) 24V GAS/FLEX FUEL DURATEC
Timing Kit
3-392S
3-708S
3-708SA
Chain
Crank Sprocket
Chain Tensioner
Chain Guide
88
46 LINKS
36 TEETH
18 TEETH
392
708
S833
S929
BT406
BT408A
BT5549
BT5550
BG409
BG410
BG5551
BG5552
BG5553
1996-2000 KIT INCLUDES (2) [392], [S833], (2) [BT406], (2)
[BT408A], [BG409], [BG410] (NOTE: CAMSHAFT SPROCKETS
ARE INTEGRATED ONTO THE CAMSHAFTS)
2001-2007 KIT INCLUDES (2) [708], [S929], (2) [BT5549], (2)
[BT5550], [BG5551], [BG5552] (NOTE: CAMSHAFT SPROCKETS
ARE INTEGRATED ONTO THE CAMSHAFTS) EXC. FUSION
2006-2009 INCLUDES (2) [708], [S929], (2) [BT5549], (2) [BT5550],
(2) [BG5553] (NOTE: VVT CAM SPROCKETS ARE NOT
INCLUDED) FUSION W/ VVT ENG.
1996-2000 61 LINKS 2 REQ.
2001-2009 144 LINKS 2 REQ.
1996-2000 18 TEETH
2001-2009 21 TEETH
1996-2000 TIMING CHAIN TENSIONER; 2 REQ.
1996-2000 TIMING CHAIN TENSIONER ARM; 2 REQ.
2001-2009 TIMING CHAIN TENSIONER; 2 REQ.
2001-2009 TIMING CHAIN TENSIONER ARM; 2 REQ.
1996-2000 TIMING CHAIN GUIDE; LEFT HAND
1996-2000 TIMING CHAIN GUIDE; RIGHT HAND
2001-2007 TIMING CHAIN GUIDE; LEFT HAND; EXC. FUSION
2001-2007 TIMING CHAIN GUIDE; RIGHT HAND; EXC. FUSION
2006-2009 FUSION; 2 REQ.; REPLACEMENT LINING FOR THE
R.H & L.H. TIMING CHAIN GUIDES LOCATED IN THE VVT
HOUSING ASSEMBLY; LINING ONLY DOES NOT INCLUDE
GUIDE ASSEMBLY
FORD (Continued)
Line
No.
25
Part Title
Part No
Description
3.0-U,1,2 (182) OHV ENG - 1986-07 - V6 - 3.500 Bore (CODE 1 FLEX FUEL METHANOL) (CODE 2
FLEX FUEL ETHANOL) (CODE U GAS) (PROBE 1990-92) (TAURUS 1986-07) (TEMPO 1992-94)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-374S
3-396S
374
396
S636
S856
S649
S749
S859
INCLUDES [374], [S636] & [S649] 1986-98 EXC. 1992-94 TEMPO
W/M.T.
1999-2007 INCLUDES [396], [S859], [S856] EXCLUDING SHO
1986-1998 62 LINKS
1999-2007 62 LINKS
1986-1998 38 TEETH
1999-2007 38 TEETH EXCLUDING SHO
19 TEETH 1986-98 EXC. 1992-94 TEMPO W/M.T.
1992-1994 19 TEETH TEMPO W/M.T.
1999-2007 19 TEETH EXCLUDING SHO
26
3.0-Y (183) DOHC ENG - 1989-95 - V6 - 3.500 Bore (SHO)
27
3.2-P (192) DOHC ENG - 1993-95 - V6 - 3.50 Bore (SHO)
28
29
30
31
32
33
Belt
Belt
B-0248
B-0248
1989-1995 155 TEETH CAM FRONT
1993-1995 155 TEETH CAM FRONT
3.3-B,T,X (200) ENG - 1963-83 - 6 Cyl. - 3.68 Bore
Cam Thrust Plate
3pc Set
Chain
Cam Sprocket
Crank Sprocket
MF108
3-351S
351
S308
S397
INCLUDES [351], [S308] & [S397]
50 LINKS
38 TEETH
19 TEETH
215 ENG - 1952-53 - 6 Cyl. - 3 9/16 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-344S
344
S249
S250
INCLUDES [344], [S249] & [S250]
56 LINKS
42 TEETH
21 TEETH
221 ENG - 1962-63 - 8 Cyl. - 3 1/2 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-356S
356
S326
S327
INCLUDES [356], [S326] & [S327]
58 LINKS
42 TEETH
21 TEETH
221 ENG - 1942 - 8 Cyl. - 3.063 Bore
Cam Gear
4706
44 TEETH ALUM.
223 ENG - 1954-64 - 6 Cyl. - 3 5/8 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-344S
344
S249
S250
INCLUDES [344], [S249] & [S250] EXC. POLICE & TAXI
56 LINKS EXC. POLICE & TAXI
42 TEETH EXC. POLICE & TAXI
21 TEETH EXC. POLICE & TAXI
3.8-3,4,C,R (232) OHV ENG - 1982-04 - V6 - 3.81 Bore
GRANADA,LTD,MUSTANG,TAURUS,THUNDERBIRD) (FOR VANS SEE TRUCK APPLICATIONS)
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-365SA
3-376S
365
376
CB200
S542
S700
S539
BT323
1982-1987 INCLUDES [365], [S542] & [S539]
1988-2004 INCLUDES [376], [S700] & [S539]
1982-1987 60 LINKS
1988-2004 60 LINKS
1982-1987
1982-1987 42 TEETH
1988-2004 42 TEETH
21 TEETH
From 5/10/89 TO 1998
89
FORD (Continued)
Line
No.
Part Title
Part No
Description
34
3.9-6 (238) OHV ENG - 2004-07 - 6 Cyl. - 3.81 Bore (FREESTAR) (2004 MUSTANG)
35
239 ENG - 1932-53 - 8 Cyl. - 3.19 Bore (INC. 8BA) L-HEAD
36
37
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Gear Set
Cam Gear
Crank Gear
3-376S
376
S700
S539
BT323
2727S
2702
4706
2701
INCLUDES [376], [S700] & [S539]
60 LINKS
42 TEETH
21 TEETH
FREESTAR ONLY
1949-1953 INCLUDES [2702] & [2701]
1949-1953 44 TEETH ALUM
1941-1948 44 TEETH ALUM.
1949-1953 22 TEETH
239 ENG - 1954 - 8 Cyl. - 3.50 Bore (OHV)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-344S
344
S249
S250
INCLUDES [344], [S249] & [S250]
56 LINKS
42 TEETH
21 TEETH
240 ENG - 1965-72 - 6 Cyl. - 4.000 Bore
Gear Set
2750AS
2764S
2766AS
2766S
ALUMINUM - REPLACE AS SET ONLY; STANDARD DUTY
CAST- REPLACE AS A SET ONLY
ALUMINUM - REPLACE AS SET ONLY. HEAVY DUTY
INCLUDES [2766] & [2765] FIBER - REPLACE AS SET ONLY
38
4.0-N (245) SOHC ENG - 2005-10 - V6 - 3.95 Bore (MUSTANG) SFI
39
4.1 (250) ENG - 1969-80 - 6 Cyl. - 3.68 Bore
40
4.2 (255) ENG - 1980-82 - 8 Cyl. - 3.68 Bore
41
42
43
Timing Kit
Cam Thrust Plate
Cam Thrust Plate
3pc Set
Chain
Cam Sprocket
Crank Sprocket
KIT INCLUDES (3) TIMING CHAINS, (1) B. SHAFT CHAIN, (2)
CAM SPROCKETS, (2) JACKSHAFT SPROCKETS, (3)
TENSIONERS, (1) TENSIONER RESERVOIR, (3) GUIDES, (2)
WASHERS. SOLD AS KIT ONLY; ENTIRE KIT MUST BE
REPLACED DUE TO OE UPGRADES TO THE COMPONENTS.
ENGINES WITH BALANCE SHAFT
MF108
MF125
3-358SA
358
S430
S431
INCLUDES [358], [S430] & [S431]
58 LINKS
42 TEETH
21 TEETH
260 OHV ENG - 1962-65 - 8 Cyl. - 3.80 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-356S
356
S326
S327
INCLUDES [356], [S326] & [S327]
58 LINKS
42 TEETH
21 TEETH
272 ENG - 1955-57 - 8 Cyl. - 3 5/8 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-344S
344
S249
S250
INCLUDES [344], [S249] & [S250]
56 LINKS
42 TEETH
21 TEETH
4.6-R,Y (281) DOHC ENG - 2003-04 - V8 - 3.55 Bore (2003-04 MUSTANG MACH 1, MUSTANG SVT
COBRA) (ROMEO ENG)
Timing Kit
Continued on Next Page
90
3-398S
3-387SKF
KIT INCLUDES (2) [387], (2) [189], [S764], [S766], [S869], (4)
[S790P], [BT404], [BT405], [BT429], [BT430], [BD393], [BD394],
[BG391G], [BG392G] MUST USE FINE FINISH CHAIN IN COBRA
APPLICATION
FORD (Continued)
Line
No.
43
Part Title
Part No
4.6-R,Y (281) DOHC ENG - 2003-04 - V8 - 3.55 Bore (2003-04 MUSTANG MACH 1, MUSTANG SVT
COBRA) (ROMEO ENG) (Continued)
Cam Thrust Plate Spacer
Cam Sprocket
189
387
S803SP
S764
S766
S790P
Crank Sprocket
Chain Tensioner
S869
5497B
Damper
BT404
BT405
BT429
BT430
BD393
Chain
BD394
Chain Guide
44
Description
BG391G
BG392G
44 LINKS SECONDARY (2) REQ.
116 LINKS PRIMARY (2) REQ.
42 TEETH LEFT PRIMARY
42 TEETH RIGHT PRIMARY
20 TEETH SECONDARY R.H. & L.H.; (4) REQ.; NOT
INTERCHANGABLE W/S790
21 TEETH 1 PC DESIGN WITH HUB; HUB ACTS AS SPACER
OE YR3Z-6K282-AA TENSIONER BOLT; MUST BE USED W/
BD393 & BD394
SECONDARY LEFT
SECONDARY RIGHT
PRIMARY RIGHT
PRIMARY LEFT
LEFT HAND ARM; MUST USE W/ 5497B PIVOT BOLT (NOT
INCLUDED)
RIGHT HAND ARM; MUST USE W/ 5497B PIVOT BOLT (NOT
INCLUDED)
LEFT; REQUIRES NEW BOLTS - NOT SUPPLIED
RIGHT; REQUIRES 2 MOUNTING BOLTS NOT SUPPLIED;
REPLACES [BG392]
4.6-V (281) DOHC ENG - 1996-01 - V8 - 3.55 Bore (MUSTANG SVT COBRA) NOT MANUFACTURED
IN 2000 (ROMEO ENG)
Timing Kit
3-387SGF
3-387SHF
3-387SJF
Chain
Cam Thrust Plate Spacer
Cam Sprocket
Crank Sprocket
189
189
387
387
S803SP
S803SP
S764
S764
S766
S766
S790
S790P
S843
S869
1998-1999 REPLACES [3-387SF]; KIT INCLUDES (2) [387], (2)
[189], [S764], [S766], (4) [S790P], [S843], [BT402], [BT403],
[BT404], [BT405], [BD393], [BD394], [BG391], [BG392G] (MUST
USE FINE FINISH CHAIN IN COBRA APPLICATION.)
1996-1997 REPLACES [3-387SD] AND [3-387SE]; KIT INCLUDES
(2) [387], (2) [189], [S764], [S766, (4) [S790], [S843], [BT402],
[BT403], [BT404], [BT405], [BD393], [BD394], [BG391], [BG392G]
MUST USE FINE FINISH CHAIN IN COBRA APPLICATION
2001 KIT INCLUDES (2) [387], (2) [189], [S764], [S766], (4)
[S790P], [S869], [BT402], [BT403], [BT404], [BT405], [BD393],
[BD394], [BG391], [BG392G] (MUST USE FINE FINISH CHAIN IN
COBRA APPLICATION.)
1996-1999 44 LINKS SECONDARY (2) REQ.
2001 44 LINKS SECONDARY (2) REQ.
1996-1999 116 LINKS PRIMARY (2) REQ.
2001 116 LINKS PRIMARY (2) REQ.
1996-1999
2001
1996-1999 42 TEETH LEFT PRIMARY
2001 42 TEETH LEFT PRIMARY
1996-1999 42 TEETH RIGHT PRIMARY
2001 42 TEETH RIGHT PRIMARY
1996-1997 20 TEETH SECONDARY R.H. & L.H.; 4 REQ.
1998-1999 20 TEETH SECONDARY (4) REQ. (NOT
INTERCHANGEABLE W/S790)
1996-1999 21 TEETH 1 PC. DESIGN
2001 21 TEETH 1 PC DESIGN WITH HUB - HUB ACTS AS
SPACER
Continued on Next Page
91
FORD (Continued)
Line
No.
44
Part Title
Part No
4.6-V (281) DOHC ENG - 1996-01 - V8 - 3.55 Bore (MUSTANG SVT COBRA) NOT MANUFACTURED
IN 2000 (ROMEO ENG) (Continued)
Chain Tensioner
5497B
5497B
Damper
BT402
BT402
BT403
BT403
BT404
BT404
BT405
BT405
BD393
BD393
BD394
BD394
Chain Guide
BG391
BG391
BG392G
BG392G
45
1996-1999 OE YR3Z-6K282-AA TENSIONER BOLT; MUST BE
USED W/ BD393 & BD394
2001 OE YR3Z-6K282-AA TENSIONER BOLT; MUST BE USED W/
BD393 & BD394
1996-1999 PRIMARY LEFT; NO ADAPTER PLATE REQUIRED
2001 PRIMARY LEFT; NO ADAPTER PLATE REQUIRED
1996-1999 PRIMARY RIGHT; NO ADAPTER PLATE REQUIRED
2001 PRIMARY RIGHT; NO ADAPTER PLATE REQUIRED
1996-1999 SECONDARY LEFT
2001 SECONDARY LEFT
1996-1999 SECONDARY RIGHT
2001 SECONDARY RIGHT
1996-1999 LEFT HAND ARM; MUST USE W/ 5497B PIVOT BOLT
(NOT INCLUDED)
2001 LEFT HAND ARM; MUST USE W/ 5497B PIVOT BOLT (NOT
INCLUDED)
1996-1999 RIGHT HAND ARM; MUST USE W/ 5497B PIVOT
BOLT (NOT INCLUDED)
2001 RIGHT HAND ARM; MUST USE W/ 5497B PIVOT BOLT
(NOT INCLUDED)
1996-1999 LEFT SECONDARY
2001 LEFT SECONDARY
1996-1999 RIGHT SECONDARY; TWO MOUNTING BOLTS NOT
SUPPLIED; REPLACES [BG392]
2001 RIGHT SECONDARY; TWO MOUNTING BOLTS NOT
SUPPLIED; REPLACES [BG392]
4.6-X (281) SOHC ENG - 1996-04 - V8 - 3.55 Bore (MUSTANG GT, GT BULLITT)
Timing Kit
3-387SA
3-387SAX
3-387SC
3-387SG
Chain
Cam Thrust Plate Spacer
Cam Sprocket
Crank Sprocket
Chain Tensioner
Damper
Chain Guide
Continued on Next Page
92
Description
387
S802SP
S764
S766
S843
S869
BT402
BT403
BD321
BD322
BG319
1996-1998 REPLACES [3-387S] AND [3-387SB]; SILENT CHAIN
DOES NOT REQUIRE ADAPTER PLATES; KIT INCLUDES (2)
387, S766 R.H., S764 L.H., S843 (1PC), BT402 L.H., BT403 R.H.,
BD322 R.H., BD321 L.H., BG320 R.H., BG319 L.H SILENT CHAIN
(DOES NOT REQUIRE (2) ADAPTER PLATES)
1996-1998 SILENT CHAIN UPGRADE; KIT INCLUDES (2) 387,
BT402 L.H., BT403 R.H., BD322 R.H., BD321 L.H., BG320 R.H.,
BG319 L.H., (2) AP275; NOTE: THIS KIT DOES NOT CONTAIN
SPROCKETS
1999-2004 KIT INCLUDES (2) [387], [BT402], [BT403], [BG333],
[BG334], [BD322], [BD321], DOES NOT INCLUDE SPROCKETS
1999-2004 KIT INCLUDES (2) [387], [S766], [S764], [S869],
[BG333], [BG334], [BD321], [BD322], [BT402], [BT403] (SILENT
CHAIN) (DOES NOT REQUIRE (2) ADAPTER PLATES)
116 LINKS (2) REQ.
1996-2004 42 TEETH LEFT HAND
1996-2004 42 TEETH RIGHT HAND
1996-2000 21 TEETH (1 PC. DESIGN)
2001-2004 21 TEETH 1 PC. DESIGN WITH HUB
1996-2004 LEFT HAND
1996-2004 RIGHT HAND, ADAPTER PLATES NOT REQUIRED
1996-2004 (ARM) LEFT HAND
1996-2004 (ARM) RIGHT HAND
1996-1998 RIGHT HAND
FORD (Continued)
Line
No.
Part Title
Part No
Description
45
4.6-X (281) SOHC ENG - 1996-04 - V8 - 3.55 Bore (MUSTANG GT, GT BULLITT) (Continued)
46
4.6-V,W,6,9 (281) SOHC ENG - 1992-11 - V8 - 3.55 Bore (CROWN VICTORIA,THUNDERBIRD) 16V
ROMEO & WINDSOR ENG. GAS,CNG,FLEX
Chain Guide
Timing Kit
BG320
BG333
BG334
3-387SA
3-387SAX
3-387SC
3-387SG
3-387SGX
3-387SIF
Chain
Cam Thrust Plate Spacer
Cam Sprocket
Crank Sprocket
Chain Tensioner
185
387
S802SP
S736
S740
S760
S762
S764
S766
S751
S791
S843
S869
BT402
BT403
Damper
Chain Guide
BT429
BT430
BD321
BD322
BG315
BG316
BG319
BG320
BG333
1996-1998 LEFT HAND
1999-2004 RIGHT HAND (SILENT CHAIN)
1999-2004 LEFT HAND (SILENT CHAIN)
1992-2000 REPLACES [3-387S] AND [3-387SB]; SILENT CHAIN
DOES NOT REQUIRE ADAPTER PLATES; KIT INCLUDES (2)
387, S766 R.H., S764 L.H., S843 (1PC), BT402 L.H., BT403 R.H.,
BD322 R.H., BD321 L.H., BG320 R.H., BG319 L.H SILENT CHAIN
UPGRADE; WILL RETROFIT 1992-93 ROLLER CHAIN SYSTEM
1992-2000 SILENT CHAIN UPGRADE; KIT INCLUDES (2) 387,
BT402 L.H., BT403 R.H., BD322 R.H., BD321 L.H., BG320 R.H.,
BG319 L.H., (2) AP275; NOTE: THIS KIT DOES NOT CONTAIN
SPROCKETS
2001 To 10/2002 KIT INCLUDES (2) [387], [BT402], [BT403],
[BG333], [BG334], [BD322], [BD321], DOES NOT INCLUDE
SPROCKETS
2001 To 10/2002 KIT INCLUDES (2) [387], [S766], [S764], [S869],
[BG333], [BG334], [BD321], [BD322], [BT402], [BT403] SILENT
CHAIN; DOES NOT REQUIRE (2) ADAPTER PLATES
FROM 10/2002 TO 2010 SILENT CHAIN; DOES NOT REQUIRE
(2) ADAPTER PLATES; KIT INCLUDES (2) [387], [BG333],
[BG334], [BD321], [BD322], [BT429], [BT430] (NOTE: DOES NOT
INCLUDE SPROCKETS)
From 10/2002 TO 2007 KIT INCLUDES (2) [387], [S766], [S764],
[S869], [BG333], [BG334], [BD321], [BD322], [BT429], [BT430]
SILENT CHAIN; DOES NOT REQUIRE (2) ADAPTER PLATES
1992-1993 116 LINKS (2) REQUIRED
1994-2011 116 LINKS (2) REQUIRED
1994-2008
1992 42 TEETH L.H.
1992 42 TEETH R.H.
1993 42 TEETH L.H.
1993 42 TEETH R.H.
1994-2011 42 TEETH L.H.
1994-2011 42 TEETH R.H.
1992 21 TEETH (2) REQUIRED
1993 21 TEETH (2) REQUIRED
1994-2000 21 TEETH 1 PC. DESIGN; 1 REQUIRED
2001-2011 21 TEETH 1 PC. DESIGN WITH HUB
1992 TO 10/2002 L.H.; ADAPTER PLATES NOT REQUIRED
AFTER 1995
1992 To 10/2002 R.H.; ADAPTER PLATES NOT REQUIRED
AFTER 1995
From 10/2002 TO 2011 R.H.
From 10/2002 TO 2011 L.H.
L.H. TENSIONER ARM
R.H. TENSIONER ARM
1992 R.H.
1992 L.H.
1993-2000 R.H.
1993-2000 L.H.
2001-2006 R.H. (BOLTS NOT FURNISHED)
Continued on Next Page
93
FORD (Continued)
Line
No.
46
47
Part Title
Description
4.6-V,W,6,9 (281) SOHC ENG - 1992-11 - V8 - 3.55 Bore (CROWN VICTORIA,THUNDERBIRD) 16V
ROMEO & WINDSOR ENG. GAS,CNG,FLEX (Continued)
Chain Guide
Adaptor Plate
BG334
AP275
2001-2011 L.H.
1992-1995 (2) REQUIRED
4.6-H (281) SOHC ENG - 2005-10 - V8 - 3.55 Bore (2005-10 MUSTANG GT) (2007-08 SHELBY GT)
(2008-09 BULLIT) 24V ENGINE
Timing Kit
3-387SGX
Chain
Cam Thrust Plate Spacer
Camshaft Sprocket
Actuator
Variable Cam Timing
Solenoid
Crank Sprocket
Chain Tensioner
387
S802SP
VCTA-1000
Damper
Chain Guide
48
Part No
VCTS-1000
S869
BT429
BT430
BD321
BD322
BG333
BG334
SILENT CHAIN; DOES NOT REQUIRE (2) ADAPTER PLATES;
KIT INCLUDES (2) [387], [BG333], [BG334], [BD321], [BD322],
[BT429], [BT430] (NOTE: DOES NOT INCLUDE SPROCKETS)
116 LINKS 2 REQUIRED
2 REQUIRED
MOUNTING BOLT INCLUDED 2 REQ.
MOUNTING BOLT AND INSTALLATION GASKET INCLUDED 2
REQ.
21 TEETH 1 PC DESIGN WITH HUB
R.H. TENSIONER
L.H. TENSIONER
L.H. TENSIONER ARM
R.H. TENSIONER ARM
R.H.
L.H.
289 OHV ENG - 1963-69 - 8 Cyl. - 4.00 Bore
Cam Thrust Plate
3pc Set
MF125
3-356S
3-358S
Chain
Cam Sprocket
Crank Sprocket
356
358
S326
S406
S327
S431
1965-1969 AFTER CHG. L7
1963-1965 INCLUDES [356], [S326] & [S327] TO CHANGE L7;
W/17/32" TOOTH WIDTH
1965-1969 INCLUDES [358], [S406] & [S431] AFTER CHG. L7;
W/13/32" TOOTH WIDTH
1963-1965 58 LINKS TO CHANGE L7; W/17/32" TOOTH WIDTH
1965-1969 58 LINKS AFTER CHG. L7; W/13/32" TOOTH WIDTH
1963-1965 42 TEETH TO CHANGE L7; W/17/32" TOOTH WIDTH;
OEM #C20Z6268A
1965-1969 42 TEETH AFTER CHG. L7; W/13/32" TOOTH WIDTH
1963-1965 21 TEETH TO CHANGE L7; W/17/32" TOOTH WIDTH
1965-1969 21 TEETH AFTER CHG. L7; W/13/32" TOOTH WIDTH
49
292 ENG - 1955-62 - 8 Cyl. - 3 3/4 Bore
50
5.0 (302) ENG - 1968-95 - 8 Cyl. - 4.000 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-344S
344
S249
S250
Cam Thrust Plate
MF125
MF126
3pc Set
3-163SA
3-163SA
3-163SB
3-163SB
3-358S
3-358SA
Continued on Next Page
94
INCLUDES [344], [S249] & [S250]
56 LINKS
42 TEETH
21 TEETH
1968 To 3/21/84 EXC. H.O. ENGINES
From 3/21/84 TO 1995 NOTE: IF USING 3-163SB SET OR S612
SPROCKET ON ENGINES BEFORE 3/21/84, YOU MUST USE
MF126 (3.356"L) THRUST PLATE RATHER THAN MF125 OR
STOCK (3.882"L) PLATE
1982 INCLUDES [163], [S468] & [S531] H.O. ENGINES ONLY
1984 To 3/21/84 INCLUDES [163], [S468] & [S531] H.O. ENGINES
ONLY
From 3/21/84 To 9/1/88 INCLUDES [163], [S612] & [S531] W/H.O.
From 9/1/88 TO 1995 INCLUDES [163], [S612] & [S531] FITS ALL
1968 To 5/2/72 INCLUDES [358], [S406] & [S431] EXC. H.O.
From 5/2/72 TO 1988 INCLUDES [358], [S430] & [S431] EXC. H.O.
FORD (Continued)
Line
No.
50
Part Title
Part No
Description
5.0 (302) ENG - 1968-95 - 8 Cyl. - 4.000 Bore (Continued)
3pc Set
3-700SA
Chain
163
163
163
358
395
Cam Sprocket
S406
S430
S612
S612
S612
S818
Crank Sprocket
S431
S531
S531
S531
S819
1990-1995 INCLUDES [395], [S818], [S819] THUNDERBIRD &
MUSTANG ONLY; SILENT CHAIN; USE AS SET ONLY
1982 58 LINKS ROLLER TYPE CHAIN; USE WITH H.O. ENGINE
ONLY
1984 To 9/1/88 58 LINKS ROLLER TYPE CHAIN; USE WITH H.O.
ENGINE ONLY
From 9/1/88 TO 1995 58 LINKS ROLLER TYPE CHAIN; USE
WITH S612 & S531
1968 To 9/1/88 58 LINKS EXC. H.O. ENG.
1990-1995 58 LINKS THUNDERBIRD & MUSTANG ONLY; SILENT
TYPE CHAIN; USE WITH S818 & S819
1968 To 5/2/72 42 TEETH EXC. H.O.
From 5/2/72 TO 1988 42 TEETH EXC. H.O.
From 3/21/84 TO 1985 42 TEETH H.O.
1986-1987 42 TEETH MUSTANG
1988-1995 42 TEETH FOR USE WITH 163 CHAIN
1990-1995 42 TEETH FOR USE WITH 370 CHAIN; MUSTANG &
THUNDERBIRD
1968 To 9/1/88 21 TEETH EXC. H.O. ENG.
1982 21 TEETH H.O. ENGINES ONLY
1984 To 9/1/88 21 TEETH H.O. ENGINES ONLY
From 9/1/88 TO 1995 21 TEETH FOR USE WITH 163 CHAIN;
FITS ALL
1990-1995 21 TEETH THUNDERBIRD & MUSTANG; FOR USE
WITH 370 CHAIN ONLY
51
312 ENG - 1956-57 - 8 Cyl. - 3.800 Bore
52
5.4-S (330) DOHC ENG - 2005-12 - V8 - 3.55 Bore (2005-06 FORD GT) (2007-12 MUSTANG SHELBY
GT500) 32V SUPERCHARGED
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Timing Kit
3-391SE
Chain
Cam Sprocket
189
391
S790P
Crank Sprocket
S869
Chain Tensioner
BT404
BT405
BT417
BT429
BT430
BG415
BG416
Chain Guide
53
3-344S
344
S249
S250
INCLUDES [344], [S249] & [S250]
56 LINKS
42 TEETH
21 TEETH
2005-2006 KIT INCLUDES (2) [391], (2) [189], [S869], (4) [S790P],
[BT404], [BT405], (2) [BT417], [BT429], [BT430], [BG415], [BG416]
(HUB DESIGN CRANK SPROCKET)
2005-2006 44 LINKS SECONDARY (2) REQ.
2005-2006 122 LINKS PRIMARY (2) REQ.
2005-2006 20 TEETH SECONDARY (4) REQ.; NOT
INTERCHANGEABLE W/S790
2005-2006 21 TEETH 1 PC DESIGN WITH HUB; HUB ACTS AS
SPACER
2005-2006 SECONDARY LEFT HAND
2005-2006 SECONDARY RIGHT HAND
2005-2006 ARM ASSY; (2) REQ.
2005-2006 PRIMARY; RIGHT HAND; PLASTIC
2005-2006 PRIMARY; LEFT HAND; PLASTIC
2005-2006 LEFT HAND
2005-2006 RIGHT HAND
332 ENG - 1958-59 - 8 Cyl. - 4.000 Bore
Chain
Cam Sprocket
Crank Sprocket
494
S284
S321
48 LINKS
36 TEETH
18 TEETH
95
FORD (Continued)
Line
No.
54
55
Part Title
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Cam Thrust Plate
MF125
MF126
MF126
3pc Set
3-163SA
3-163SB
3-163SB
3-358S
3-358SA
163
163
358
358
S406
S430
S612
S612
S431
S531
S531
Crank Sprocket
3pc Set
Cam Sprocket
Crank Sprocket
1980-1984 EXC. H.O.
1980-1984 H.O.
1987-1991 IF USING 3-163SB SET OR S612 SPROCKET ON
NON-H.O. ENGINES BEFORE 1987, YOU MUST USE THE MF126
(3.356"L) THRUST PLATE RATHER THAN THE MF125 STOCK
(3.882"L) PLATE
1980 To 3/21/84 INCLUDES [163], [S468] & [S531] W/H.O.
From 3/21/84 TO 1984 INCLUDES [163], [S612] & [S531] W/H.O.
1987-1991 INCLUDES [163], [S612] & [S531]
1969 To 5/2/72 INCLUDES [358], [S406] & [S431]
From 5/2/72 TO 1985 INCLUDES [358], [S430] & [S431] EXC. H.O.
1980-1984 58 LINKS W/H.O.
1987-1991 58 LINKS
1969-1979 58 LINKS
1980-1984 58 LINKS EXC. H.O.
1969 To 5/2/72 42 TEETH
From 5/2/72 TO 1984 42 TEETH EXC. H.O.
From 3/21/84 TO 1984 42 TEETH W/H.O.
1987-1991 42 TEETH
1969-1984 21 TEETH EXC. H.O.
1980-1984 21 TEETH W/H.O.
1987-1991 21 TEETH
3-494SB
3-494SB
3-498SB
494
494
498
S420
S420
S436
S475
S493
S493
1970-1972 INCLUDES [494], [S420] & [S493] W/2BC
1970-1973 INCLUDES [494], [S420] & [S493] W/4BC
1973-1974 INCLUDES [498], [S436] & [S475] W/2BC
1970-1972 48 LINKS W/2BC
1970-1973 48 LINKS W/4BC
1973-1974 48 LINKS W/2BC
1970-1972 36 TEETH W/2BC
1970-1973 36 TEETH W/4BC
1973-1974 36 TEETH W/2BC
1973-1974 18 TEETH W/2BC
1970-1972 18 TEETH W/2BC
1970-1973 18 TEETH W/4BC
5.8-Q (351C) COBRA JET ENG - 1971-74 - 8 Cyl. - 4.000 Bore MUSTANG,TORINO,GRAN TORINO
(CLEVELAND COBRA JET)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-494SB
494
S420
S493
INCLUDES [494], [S420] & [S493]
48 LINKS
36 TEETH
18 TEETH
5.8-H (351M) ENG - 1975-79 - 8 Cyl. - 4.00 Bore (MODIFIED) DOES NOT INCLUDE VANS
3pc Set
Chain
Cam Sprocket
Continued on Next Page
96
INCLUDES [494], [S420] & [S493]
48 LINKS
36 TEETH
18 TEETH
5.8-H,M,Q (351C) ENG - 1970-74 - 8 Cyl. - 4.000 Bore (CLEVELAND) DOES NOT INCLUDE VANS
Chain
58
3-494SB
494
S420
S493
5.8-G,H,M (351W) ENG - 1969-91 - 8 Cyl. - 4.00 Bore (WINDSOR) DOES NOT INCLUDE VANS (ENG.
NOT PRODUCED IN 1985-86)
Cam Sprocket
57
Description
5.8 (351C) ENG - 1971-72 - 8 Cyl. - 4.000 Bore (1971-72 MUSTANG BOSS 351,TORINO GT) (1972
GRAN TORINO SPORT) (CLEVELAND BOSS)
Chain
56
Part No
3-498SB
498
S436
INCLUDES [498], [S436] & [S475]
48 LINKS
36 TEETH
FORD (Continued)
Line
No.
58
59
Part Title
Crank Sprocket
S475
18 TEETH
5.8-G (351M) ENG - 1985-86 - 8 Cyl. - 4.00 Bore (MODIFIED) LTD DOES NOT INCLUDE VANS
3pc Set
Cam Sprocket
Crank Sprocket
3-163SB
3-358SA
163
358
S430
S612
S431
S531
INCLUDES [163], [S612] & [S531] W/H.O.
INCLUDES [358], [S430] & [S431] W/O H.O.
58 LINKS W/POLICE
58 LINKS W/O POLICE
42 TEETH W/O POLICE
42 TEETH W/POLICE
21 TEETH W/O POLICE
21 TEETH W/POLICE
5.8-Z (355) DOHC ENG - 2013-14 - 8 Cyl. - 3.68 Bore (SHELBY, SHELBY GT500) 32V
SUPERCHARGED
Cam Sprocket
Chain Tensioner
61
Description
5.8-H (351M) ENG - 1975-79 - 8 Cyl. - 4.00 Bore (MODIFIED) DOES NOT INCLUDE VANS
(Continued)
Chain
60
Part No
S790P
BT404
BT405
20 TEETH SECONDARY (4) REQUIRED
SECONDARY; LEFT HAND
SECONDARY; RIGHT HAND
352 OHV ENG - 1958-67 - 8 Cyl. - 4.00 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-169S
3-494SA
169
494
S284
S410
S321
S331
1963-1967 INCLUDES [169], [S410] & [S331] HEAVY DUTY
1963-1967 INCLUDES [494], [S396] & [S321] STANDARD DUTY
1963-1967 64 LINKS HEAVY DUTY
48 LINKS STANDARD DUTY
1958-1962 36 TEETH STANDARD DUTY
1963-1967 48 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
1963-1967 24 TEETH HEAVY DUTY
62
361 ENG - 1958-59 - 8 Cyl. - 4.05 Bore (EDSEL)
63
390 ENG - 1961-71 - 8 Cyl. - 4.05 Bore
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
64
3-169S
3-494SA
169
494
S284
S396
S410
S321
S331
48 LINKS
36 TEETH
18 TEETH
1963-1971 INCLUDES [169], [S410] & [S331] HEAVY DUTY
1963-1971 INCLUDES [494], [S396] & [S321] STANDARD DUTY
1963-1971 64 LINKS HEAVY DUTY
48 LINKS STANDARD DUTY
1961-1962 36 TEETH STANDARD DUTY
1963-1971 36 TEETH STANDARD DUTY
1963-1971 48 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
1963-1971 24 TEETH HEAVY DUTY
400 ENG - 1971-78 - 8 Cyl. - 4.000 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
65
494
S284
S321
3-494SB
3-498SB
494
498
S420
S436
S475
S493
1971-1972 INCLUDES [494], [S420] & [S493]
1973-1978 INCLUDES [498], [S436] & [S475]
1971-1972 48 LINKS
1973-1978 48 LINKS
1971-1972 36 TEETH
1973-1976 36 TEETH
1973-1978 18 TEETH
1971-1972 18 TEETH
406 ENG - 1962-63 - 8 Cyl. - 4.13 Bore (1962 SPEC-W/4BC & 6BC,1963 GALAXIE)
Chain
Cam Sprocket
494
S284
48 LINKS
1962 36 TEETH
97
FORD (Continued)
Line
No.
66
Part Title
Part No
427 ENG - 1963-68 - 8 Cyl. - 4.234 Bore
3-169S
3-494SA
169
494
S410
S321
S331
3pc Set
Chain
Cam Sprocket
Crank Sprocket
67
3-169S
3-494SA
169
494
S396
S410
S321
S331
3pc Set
Cam Sprocket
Crank Sprocket
69
70
INCLUDES [169], [S410] & [S331] HEAVY DUTY
1964-1968 INCLUDES [494], [S396] & [S321] STANDARD DUTY
64 LINKS HEAVY DUTY
48 LINKS STANDARD DUTY
48 TEETH HEAVY DUTY
1964-1968 18 TEETH STANDARD DUTY
24 TEETH HEAVY DUTY
428 ENG - 1966-70 - 8 Cyl. - 4.13 Bore (INCLUDES COBRA JET/SUPER CJ; POLICE)
Chain
68
Description
INCLUDES [169], [S410] & [S331] HEAVY DUTY
INCLUDES [494], [S396] & [S321] STANDARD DUTY
64 LINKS HEAVY DUTY
48 LINKS STANDARD DUTY
36 TEETH STANDARD DUTY
48 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
24 TEETH HEAVY DUTY
429 ENG - 1968-73 - 8 Cyl. - 4.360 Bore
3pc Set
3-491S
3-491SA
Chain
Cam Sprocket
Crank Sprocket
491
S420
S493
1972-1973 INCLUDES [491], [S420], [S421]
1968-1971 INCLUDES (491] CHAIN, [S420] CAM SPROCKET,
[S493] CRANK SPROCKET
52 LINKS
36 TEETH
1968-1971 18 TEETH
430 ENG - 1959-60 - 8 Cyl. - 4.300 Bore
491
S283
Chain
Crank Sprocket
52 LINKS
20 TEETH
460 ENG - 1972-78 - 8 Cyl. - 4.360 Bore
3pc Set
3-491S
3-491SA
Chain
Cam Sprocket
Crank Sprocket
491
S420
S493
INCLUDES [491], [S420], [S421] EXC. 1973-74 POLICE
1973-1974 INCLUDES (491] CHAIN, [S420] CAM SPROCKET,
[S493] CRANK SPROCKET POLICE
52 LINKS
36 TEETH
1973-1974 18 TEETH POLICE
FORD INDUSTRIAL
4 Cyl.
Engine
Year
Line
134
1
172 DIESEL & GAS
2
6 Cyl.
Engine
6 Cyl. (Continued)
Year
262
8 Cyl.
292
200 & 200 GP
3
223
4
240
5
Line
No.
Part Title
Line
8 Cyl.
6
7
6 Cyl.
300
8
Part No
Engine
9
401
10
460
11
477
12
534
13
Description
134 ENG - 4 Cyl. - 3 7/16 Bore (E,E134,JE & B8PE ENGS)
2
172 DIESEL & GAS ENG - 4 Cyl. - 3.9 Bore (172,B172,D172 & B8PD ENGS)
3
Gear Set
4710S
INCLUDES [4710] & [4701]
INCLUDES [4710] & [4701]
200 & 200 GP ENG - 6 Cyl. - 3.680 Bore
3pc Set
Chain
Continued on Next Page
98
4710S
3-351S
351
Line
332
1
Gear Set
Year
INCLUDES [351], [S308] & [S397]
50 LINKS
FORD INDUSTRIAL (Continued)
Line
No.
Part Title
Part No
Description
3
200 & 200 GP ENG - 6 Cyl. - 3.680 Bore (Continued)
4
223 ENG - 6 Cyl. - 3.625 Bore
5
6
7
8
9
10
11
12
13
S308
S397
Cam Sprocket
Crank Sprocket
38 TEETH
19 TEETH
3-344S
344
S249
S250
3pc Set
Chain
Cam Sprocket
Crank Sprocket
INCLUDES [344], [S249] & [S250]
56 LINKS
42 TEETH
21 TEETH
240 ENG - 6 Cyl. - 4.00 Bore
2764S
Gear Set
CAST - REPLACE AS SET ONLY
262 ENG - 6 Cyl. - 3 23/32 Bore (G & C1PG ENGS)
2748
Crank Gear
42 TEETH H.D.
292 ENG - 8 Cyl. - 3 3/4 Bore (K,K292 & B8PK ENGS)
3-344S
344
S249
S250
3pc Set
Chain
Cam Sprocket
Crank Sprocket
INCLUDES [344], [S249] & [S250]
56 LINKS
42 TEETH
21 TEETH
300 ENG - 6 Cyl. - 4.00 Bore
2764S
Gear Set
CAST - REPLACE AS SET ONLY
332 ENG - 8 Cyl. - 3.8 Bore (L,L332 & B6PL ENGS)
2733
Cam Gear
60 TEETH
401 ENG - 8 Cyl. - 4 1/8 Bore (B8PQ & Q ENGS)
2737
Crank Gear
55 TEETH
460 ENG - 8 Cyl. - 4.360 Bore
3-491S
491
S420
3pc Set
Chain
Cam Sprocket
INCLUDES [491], [S420], [S421]
52 LINKS
36 TEETH
477 ENG - 8 Cyl. - 4 1/2 Bore (B8PM & M ENGS)
2737
Crank Gear
55 TEETH
534 ENG - 8 Cyl. - 4 1/2 Bore (B8PN & N ENGS)
2737
Crank Gear
55 TEETH
FORD TRACTOR
Year
Line
120
1939-52
1
134 GAS & LPG
1953-64
2
4 Cyl.
Line
No.
Engine
Part Title
Engine
Year
Line
134 KEROSENE
1953-57
3
144 DIESEL
1958-64
4
4 Cyl. (Continued)
Part No
Engine
Year
Line
172 DIESEL
1958-64
5
172 GAS & KEROSENE
1955-64
6
4 Cyl. (Continued)
Description
1
120 ENG - 1939-52 - 4 Cyl. - 3 3/16 Bore (MODELS 2N,8N & 9N)
2
134 GAS & LPG ENG - 1953-64 - 4 Cyl. - 3 7/16 Bore (MODELS
NAA,501,600,601,700,701,2030,2031,2110, 2111,2120,2130 & 2131)
3
4
Cam Gear
Gear Set
4706
4710S
44 TEETH EXC. 1939-41 9N
INCLUDES [4710] & [4701]
134 KEROSENE ENG - 1953-57 - 4 Cyl. - 3 7/16 Bore (MODELS NAA,600 & 700)
Gear Set
4710S
INCLUDES [4710] & [4701]
144 DIESEL ENG - 1958-64 - 4 Cyl. - 3 9/16 Bore (MODELS 501,AFTER SER#
153775,601,701,2030,2031,211 2111,2120,2130 & 2131)
Gear Set
4710S
INCLUDES [4710] & [4701]
99
FORD TRACTOR (Continued)
Line
No.
5
6
Part Title
Part No
Description
172 DIESEL ENG - 1958-64 - 4 Cyl. - 3.9 Bore (MODELS
801,901,1801,4000,4030,4031,4040,4110,4120, 4121,4130,4131 & 4140)
4710S
Gear Set
INCLUDES [4710] & [4701]
172 GAS & KEROSENE ENG - 1955-64 - 4 Cyl. - 3.9 Bore (MODELS 800,801,900,901,1801,4000,
4030,4031,4040,4110,4120,4121,4130,4131)
4710S
Gear Set
INCLUDES [4710] & [4701]
FORD TRUCK
Year
Line
1.8 (110) SOHC
1972-78
1
2.0 (122) OHC
1979-82
2
8 Cyl.
4 Cyl.
Engine
2.0-B (121) DOHC
2001-04
3
2.0 (122) SOHC
1983-88
4
Engine
Year
Line
4.0-E,K (245) SOHC
1997-11
24
4.0-X (245) OHV
1990-00
25
5.8-G,H,M (351W)
1969-85
48
4.2-D (255)
1981-82
26
5.8-R (351W)
1993-95
49
1954-55
27
5.8-H (351)
1984-97
50
352
1965-67
51
359
1974-78
52
360
1968-76
53
361
1964-78
54
6.1 (370)
1980-91
55
6.4 (389)
1975-78
56
6.4-H,M (390)
1968-76
57
1964-78
58
6 Cyl. (Continued)
2.0 (121) DOHC
2004-08
5
256
2.3 (140) SOHC
1977-82
6
2.3-E (140) DIESEL
1985-87
7
6 Cyl.
2.3 (140) SOHC
1983-97
8
2.3-D,H,Z (140) DOHC
2001-12
9
6 Cyl.
144
1960-64
4 Cyl.
2.5-C (153) SOHC
10
1998-01
11
170
1964-72
12
2.8-S (171)
1983-85
2.9-T (177)
3.0 (182) OHV
4.2-2 (256) OHV
8 Cyl.
260
1997-08
1962-64
6 Cyl.
262
1961-64
8 Cyl.
28
29
30
Engine
8 Cyl. (Continued)
Year
Line
5.8 (351C)
1970-74
46
5.8 (351M)
1977-81
47
272
1956-57
31
391
4.6-6 (281) SOHC
1997-03
32
6.6-S,Z (400)
1977-82
59
4.6-W (281) SOHC
1997-13
33
401
1958-76
60
13
4.6-8 (281) SOHC
2006-10
34
1986-92
14
289
1964-68
35
10 Cyl.
1986-08
15
292
1958-64
36
3.0-1,G (182) DOHC
2001-12
16
3.3-T (200)
1963-74
16
6 Cyl.
1965-96
37
215
1951-53
17
223
1954-64
18
302
1956-63
3.8-3 (232)
1982-83
19
5.0 (302) OHV
1968-01
3.8 (232)
1995-03
20
330 HD
6 Cyl.
8 Cyl.
4.9 (300)
6.8-S (415) SOHC
1997-13
61
6.8-Y (415) SOHC
2005-13
62
8 Cyl.
6.9 (420) DIESEL
1983-87
63
7.0 (428)
1968-69
64
38
7.0 (429)
1970-73
65
39
7.0 (429)
1980-98
66
1964-78
40
7.3 (445) DIESEL
1988-03
67
330
1964-77
41
7.5 (460)
1973-97
68
8 Cyl.
239
1946-53
21
5.4 (330) SOHC
1997-14
42
475
1973-79
69
239
1954-55
22
5.4-5,V (330) SOHC
2004-14
43
477
1958-81
70
332
1956-63
44
534
1958-81
71
332 ENG
1960-63
45
6 Cyl.
240 OHV
Line
No.
1
1965-74
Part Title
Chain
Crank Sprocket
Chain Tensioner
Damper
Description
172
3DR106
S450
S456
S449
S451
BT46
BD40
BD74
46 LINKS OIL PUMP
106 LINKS CAMSHAFT
1972-1976 38 TEETH
1977-1978 38 TEETH
19 TEETH INNER
19 TEETH OUTER
RIGHT
LEFT
2.0 (122) OHC ENG - 1979-82 - 4 Cyl. - 3.45 Bore (COURIER) MAZDA ENG.
Timing Kit
Continued on Next Page
100
Part No
1.8 (110) SOHC ENG - 1972-78 - 4 Cyl. - 3.07 Bore (COURIER 1797CC) MAZDA ENG.
Cam Sprocket
2
23
3DR106-3
1979 To 7/1/80 KIT INCLUDES [3DR106], [172], [S456], [S449],
[S451], [BT47], [BD40] & [BD74]
FORD TRUCK (Continued)
Line
No.
2
Part Title
Part No
Description
2.0 (122) OHC ENG - 1979-82 - 4 Cyl. - 3.45 Bore (COURIER) MAZDA ENG. (Continued)
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Damper
172
3DR106
8MMSR54
S456
S449
S451
S453
BT47
BD40
BD74
1979 To 7/1/79 46 LINKS OIL PUMP
106 LINKS CAMSHAFT
From 7/1/80 TO 1980 54 LINKS OIL PUMP
38 TEETH
19 TEETH INNER
1979 19 TEETH OUTER
1980-1982 19 TEETH OUTER
1979 To 7/1/80 RIGHT HAND
LEFT HAND
3
2.0-B (121) DOHC ENG - 2001-04 - 4 Cyl. - 3.34 Bore (ESCAPE LIMITED,XLS,XLT) ZTEC
4
2.0 (122) SOHC ENG - 1983-88 - 4 Cyl. - 3.525 Bore (RANGER)
5
Belt
Belt
Cam Sprocket
Crank Sprocket
Timing Cover
B-0294
B-014
S446
S447
MIC100
129 TEETH
129 TEETH
38 TEETH
19 TEETH
INNER
2.0 (121) DOHC ENG - 2004-08 - 4 Cyl. - 3.44 Bore (ECO SPORT) MEXICO ONLY DURATEC
Timing Kit
3-727S
Chain
706F
727F
S898
S891
S893
BT452
BT5514
BT5555
BG449
BG5556
Cam Sprocket
Crank Sprocket
Oil Pump Sprocket
Chain Tensioner
Chain Guide
INCLUDES [727F], [706F], (2) [S898], [S891], [S893], [BT452],
[BT5514], [BT5555], [BG449], [BG5556]
54 LINKS OIL PUMP CHAIN
134 LINKS TIMING CHAIN
2 REQ.
24 TEETH
OIL PUMP CHAIN TENSIONER
TIMING CHAIN TENSIONER; RIGHT UPPER
TIMING CHAIN TENSIONER ARM
OIL PUMP CHAIN GUIDE
TIMING CHAIN GUIDE; LEFT UPPER
6
2.3 (140) SOHC ENG - 1977-82 - 4 Cyl. - 3.44 Bore (COURIER)
7
2.3-E (140) DIESEL ENG - 1985-87 - 4 Cyl. - (OHC)
Belt
Cam Sprocket
Crank Sprocket
Belt
Cam Sprocket
Crank Sprocket
8
B-014
S446
S447
B-091
B-092
S8004
S8005
S8007
129 TEETH
38 TEETH
19 TEETH
163 TEETH CAMSHAFT
83 TEETH BAL. SHAFT
48 TEETH
24 TEETH TIMING
32 TEETH BAL. SHAFT
2.3 (140) SOHC ENG - 1983-97 - 4 Cyl. - 3.78 Bore (RANGER 1983-97 & AEROSTAR 1986-87)
Belt
Cam Sprocket
Crank Sprocket
Timing Cover
B-014
B-0210
B-0276
S446
S816
S447
S813
MIC100
1983 To 1/13/92 129 TEETH
From 1/14/92 TO 1994 129 TEETH
1995-1997 131 TEETH
1983 To 1/13/92 38 TEETH
1992-1994 38 TEETH
1983 To 1/13/92 19 TEETH
1992-1997 19 TEETH
1983-1989 INNER
101
FORD TRUCK (Continued)
Line
No.
9
Part Title
Part No
2.3-D,H,Z (140) DOHC ENG - 2001-12 - 4 Cyl. - 3.44 Bore (RANGER 2001-12) (ESCAPE,ESCAPE
HYBRID 2005-08) DURATEC
Timing Kit
3-705S
3-705SX
Chain
Cam Sprocket
Crank Sprocket
Oil Pump Sprocket
Chain Tensioner
Chain Guide
10
11
12
13
14
15
705
706F
S898
S891
S893
BT452
BT5513
BT5514
BG449
BG5515
KIT INCLUDES [705], [706F], (2) [S898], [S891], [S893], [BT5513],
[BT5514], [BT452], [BG449], [BG5515] (KIT INCLUDES OIL PUMP
CHAIN GUIDE) RWD RANGER ONLY; NORTH/SOUTH
CONFIGURATION 8MM PITCH NON-VVT
KIT INCLUDES [705], [706F], [BT5513], [BT5514], [BT452],
[BG449], [BG5515] (KIT INCLUDES OIL PUMP CHAIN GUIDE,
DOES NOT INCLUDE SPROCKETS) RWD RANGER ONLY;
NORTH/SOUTH CONFIGURATION 8MM PITCH NON-VVT
138 LINKS RANGER, 2005-06 ESCAPE; PRIMARY CHAIN
54 LINKS RANGER ONLY; OIL PUMP CHAIN
RANGER; 2 REQ.
RANGER ONLY
24 TEETH RANGER ONLY
RANGER ONLY; OIL PUMP CHAIN
RANGER ONLY; TENSIONER ARM
RANGER ONLY; RIGHT UPPER, PRIMARY CHAIN TENSIONER
RANGER ONLY; OIL PUMP CHAIN
RANGER ONLY; CAMSHAFT CHAIN
144 ENG - 1960-64 - 6 Cyl. - 3 1/2 Bore (BUS,PICK UP,RANCHERO,SEDAN DELIVERY)
Cam Thrust Plate
3pc Set
Chain
Cam Sprocket
Crank Sprocket
MF108
3-351S
351
S308
S397
INCLUDES [351], [S308] & [S397]
50 LINKS
38 TEETH
19 TEETH
2.5-C (153) SOHC ENG - 1998-01 - 4 Cyl. - 3.78 Bore (RANGER)
Belt
B-0276
131 TEETH
170 ENG - 1964-72 - 6 Cyl. - 3.50 Bore (BRONCO,RANCHERO,FALCON DELIVERY VAN)
Cam Thrust Plate
3pc Set
Chain
Cam Sprocket
Crank Sprocket
MF108
3-351S
351
S308
S397
INCLUDES [351], [S308] & [S397]
50 LINKS
38 TEETH
19 TEETH
2.8-S (171) ENG - 1983-86 - V6 - 3.66 Bore (RANGER,BRONCO & AEROSTAR)
Gear Set
2760SA
REPLACE AS A SET ONLY
2.9-T (177) ENG - 1986-92 - V6 - 3.6619 Bore (BRONCO & RANGER)
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
3-3SR60AS
3-3SR60
3SR60
S650
S651
BT157
BG187
KIT INCLUDES [3SR60], [S650], [S651], [BT157], [BG187]
INCLUDES [3SR60], [S650] & [S651]
60 LINKS
38 TEETH
19 TEETH
3.0 (182) OHV ENG - 1986-08 - V6 - 3.500 Bore (1990-08 RANGER)(1986-97 AEROSTAR)(1995-00
WINDSTAR)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Continued on Next Page
102
Description
3-374S
3-396S
374
396
S636
S856
S649
1986-1998 INCLUDES [374], [S636] & [S649]
1999-2008 INCLUDES [396], [S859], [S856]
1986-1998 62 LINKS
1999-2008 62 LINKS
1986-1998 38 TEETH
1999-2008 38 TEETH
1986-1998 19 TEETH
Line
No.
15
16
17
18
19
20
21
22
23
FORD TRUCK (Continued)
Part Title
Part No
Description
3.0 (182) OHV ENG - 1986-08 - V6 - 3.500 Bore (1990-08 RANGER)(1986-97 AEROSTAR)(1995-00
WINDSTAR) (Continued)
Crank Sprocket
S859
1999-2008 19 TEETH
3.3-T (200) ENG - 1963-74 - 6 Cyl. - 3.68 Bore (1973-74 BRONCO, 1963-65 FALCON DELIVERY
SEDAN, 1964-68 RANCHERO)
Cam Thrust Plate
3pc Set
Chain
Cam Sprocket
Crank Sprocket
MF108
3-351S
351
S308
S397
INCLUDES [351], [S308] & [S397]
50 LINKS
38 TEETH
19 TEETH
215 ENG - 1951-53 - 6 Cyl. - 3.56 Bore (F SERIES, F-100 PICKUP-F350 PICKUP, P-350 VAN,
COURIER SEDAN) INCLUDES VANS
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-344S
344
S249
S250
INCLUDES [344], [S249] & [S250]
56 LINKS
42 TEETH
21 TEETH
223 ENG - 1954-64 - 6 Cyl. - 3 5/8 Bore (F100-600,B500-600, P350-500)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-344S
344
S249
S250
INCLUDES [344], [S249] & [S250]
56 LINKS
42 TEETH
21 TEETH
3.8-3 (232) ENG - 1982-83 - V6 - 3.81 Bore (F-100)
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
3-365SA
365
CB200
S542
S539
INCLUDES [365], [S542] & [S539]
60 LINKS
42 TEETH
21 TEETH
3.8 (232) ENG - 1995-03 - V6 - 3.81 Bore (WINDSTAR)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-376S
376
S700
S539
BT323
INCLUDES [376], [S700] & [S539]
60 LINKS
42 TEETH
21 TEETH
1995-1999
239 ENG - 1946-53 - 8 Cyl. - 3 3/16 Bore
Gear Set
Cam Gear
Crank Gear
2727S
2702
4706
2701
1949-1953 INCLUDES [2702] & [2701]
1949-1953 44 TEETH ALUM
1946-1948 44 TEETH ALUM.
1949-1953 22 TEETH
239 ENG - 1954-55 - 8 Cyl. - 3 1/2 Bore (F100-600,P350,B500- 600)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-344S
344
S249
S250
INCLUDES [344], [S249] & [S250]
56 LINKS
42 TEETH
21 TEETH
240 OHV ENG - 1965-74 - 6 Cyl. - 4.00 Bore (BRONCO,E-100,200,300 ECONOLINE,F-100,250,350
SERIES P.U.,P-100,200)
Gear Set
2750AS
2764S
2766AS
2766S
ALUMINUM; REPLACE AS SET ONLY; STANDARD DUTY
CAST IRON; REPLACE AS A SET ONLY
ALUMINUM; REPLACE AS SET ONLY; HEAVY DUTY
INCLUDES [2766] & [2765] FIBER; REPLACE AS SET ONLY
103
FORD TRUCK (Continued)
Line
No.
24
Part Title
Part No
4.0-E,K (245) SOHC ENG - 1997-11 - V6 - 3.95 Bore (1997-10 EXPLORER & 2001-11 RANGER) GAS
& FLEX FUEL
Timing Kit
3-398S
3-398SA
25
Balance Shaft Sprocket
Chain Tensioner
S875
BT429
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
27
28
29
104
1997-2010 KIT INCLUDES (3) TIMING CHAINS, (1) B. SHAFT
CHAIN, (2) CAM SPROCKETS, (2) JACKSHAFT SPROCKETS, (3)
TENSIONERS, (1) TENSIONER RESERVOIR, (3) GUIDES, (2)
WASHERS. SOLD AS KIT ONLY; ENTIRE KIT MUST BE
REPLACED DUE TO OE UPGRADES TO THE COMPONENTS.
A.W.D. OR 4.W.D. ONLY; ENGINES WITH BALANCE SHAFT
1997-2010 KIT INCLUDES (3) TIMING CHAINS, (2) CAM
SPROCKETS, (2) JACKSHAFT SPROCKETS, (2) TENSIONERS,
(6) GUIDES, (2) WASHERS. SOLD AS KIT ONLY; ENTIRE KIT
MUST BE REPLACED DUE TO OE UPGRADES TO THE
COMPONENTS. R.W.D. ONLY; ENGINES W/OUT BALANCE
SHAFT
1997-2010 21 TEETH
2002-2010 RIGHT HAND
4.0-X (245) OHV ENG - 1990-00 - V6 - 3.95 Bore (AEROSTAR, EXPLORER & RANGER)
3-3SRH64AS
3-3SRH64S
26
Description
Chain Guide
3-3SRH64
3-3SRH64A
3SRH64
S650
S651
S821
BT157
BT345
BG261
1995-2000 KIT INCLUDES [3SRH64], [S650], [S821], [BT345],
[BG261]
1990-1994 KIT INCLUDES [3SRH64], [S650], [S651], [BT157] &
[BG261]
1990-1994 INCLUDES [3SRH64], [S650] & [S651]
1995-2000 INCLUDES [3SRH64], [S650] & [S821]
64 LINKS
38 TEETH
1990-1994 19 TEETH
1995-2000 19 TEETH
1990-1994
1995-2000
4.2-D (255) ENG - 1981-82 - 8 Cyl. - 3.68 Bore (100-350)
Cam Thrust Plate
3pc Set
Chain
Cam Sprocket
Crank Sprocket
MF125
3-358SA
358
S430
S431
INCLUDES [358], [S430] & [S431]
58 LINKS
42 TEETH
21 TEETH
256 ENG - 1954-55 - 8 Cyl. - 3 5/8 Bore (B600-700 SCHOOL BUS,C600-700 COE,F600-700,T700)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-344S
344
S249
S250
INCLUDES [344], [S249] & [S250]
56 LINKS
42 TEETH
21 TEETH
4.2-2 (256) OHV ENG - 1997-08 - V6 - 3.81 Bore (E SERIES, F SERIES, FREESTAR) INCLUDES
VANS
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-376S
376
S700
S539
BT323
INCLUDES [376], [S700] & [S539]
60 LINKS
42 TEETH
21 TEETH
260 ENG - 1962-64 - 8 Cyl. - 3.80 Bore (RANCHERO, FALCON DELIVERY SEDAN)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-356S
356
S326
S327
INCLUDES [356], [S326] & [S327]
58 LINKS
42 TEETH
21 TEETH
FORD TRUCK (Continued)
Line
No.
Part Title
Part No
Description
30
262 ENG - 1961-64 - 6 Cyl. - 3.72 Bore (F100,F250,F350 PICKUP)
31
272 ENG - 1956-57 - 8 Cyl. - 3 5/8 Bore (F100-F700,P350-P500,B500-B700)
32
Crank Gear
3pc Set
Chain
Cam Sprocket
Crank Sprocket
2748
3-344S
161
344
S249
S250
INCLUDES [344], [S249] & [S250]
56 LINKS H.D.
56 LINKS
42 TEETH
21 TEETH
4.6-6 (281) SOHC ENG - 1997-03 - 8 Cyl. - 3.55 Bore (E SERIES 1997-98, EXPEDITION 1997-00, F
SERIES 1997-03) (WINDSOR ENG)
Timing Kit
3-387SC
3-387SG
3-387SGX
3-387SIF
Chain
Cam Thrust Plate Spacer
Cam Sprocket
Crank Sprocket
Chain Tensioner
Damper
Chain Guide
33
1964 42 TEETH HEAVY DUTY
387
S802SP
S764
S766
S843
S869
BT402
BT403
BT429
BT430
BD321
BD322
BG333
BG334
1997 To 10/2002 KIT INCLUDES (2) [387], [BT402], [BT403],
[BG333], [BG334], [BD322], [BD321], DOES NOT INCLUDE
SPROCKETS
1997 To 10/02 KIT INCLUDES (2) [387], [S766], [S764], [S869],
[BG333], [BG334], [BD321], [BD322], [BT402], [BT403]
From 10/02 TO 2003 SILENT CHAIN; DOES NOT REQUIRE (2)
ADAPTER PLATES; KIT INCLUDES (2) [387], [BG333], [BG334],
[BD321], [BD322], [BT429], [BT430] (NOTE: DOES NOT INCLUDE
SPROCKETS)
From 10/2002 TO 2003 KIT INCLUDES (2) [387], [S766], [S764],
[S869], [BG333], [BG334], [BD321], [BD322], [BT429], [BT430]
116 LINKS (2) REQ.
2002
2000-2003 42 TEETH L.H.
2000-2003 42 TEETH R.H.
1997-2000 21 TEETH (1 PC. DESIGN)
2002-2003 21 TEETH ONE PIECE WITH HUB - HUB ACTS AS
SPACER
1997 To 10/02 LEFT HAND, ADAPTER PLATES NOT REQUIRED
1997 To 10/02 RIGHT HAND, ADAPTER PLATES NOT REQUIRED
AFTER 1995
From 10/02 TO 2003 RIGHT HAND
From 10/02 TO 2003 LEFT HAND
(ARM) LEFT HAND
(ARM) RIGHT HAND
RIGHT HAND
LEFT HAND
4.6-W (281) SOHC ENG - 1997-13 - 8 Cyl. - 3.55 Bore (E SERIES,F
SERIES,EXPEDITION,EXPLORER) (INCLUDES VANS) 16V GAS/FLEX ROMEO ENG
Timing Kit
3-387SA
3-387SAX
3-387SC
3-387SG
1997-2000 REPLACES [3-387S] AND [3-387SB]; SILENT CHAIN
DOES NOT REQUIRE ADAPTER PLATES; KIT INCLUDES (2)
387, S766 R.H., S764 L.H., S843 (1PC), BT402 L.H., BT403 R.H.,
BD322 R.H., BD321 L.H., BG320 R.H., BG319 L.H
1997-2000 SILENT CHAIN UPGRADE; KIT INCLUDES (2) 387,
BT402 L.H., BT403 R.H., BD322 R.H., BD321 L.H., BG320 R.H.,
BG319 L.H., (2) AP275; NOTE: THIS KIT DOES NOT CONTAIN
SPROCKETS
2001 To 10/2002 KIT INCLUDES (2) [387], [BT402], [BT403],
[BG333], [BG334], [BD322], [BD321], DOES NOT INCLUDE
SPROCKETS
2001 To 10/2002 KIT INCLUDES (2) [387], [S766], [S764], [S869],
[BG333], [BG334], [BD321], [BD322], [BT402], [BT403] (WINDSOR
STYLE GUIDES - ROMEO PLANT)
Continued on Next Page
105
FORD TRUCK (Continued)
Line
No.
33
Part Title
Part No
4.6-W (281) SOHC ENG - 1997-13 - 8 Cyl. - 3.55 Bore (E SERIES,F
SERIES,EXPEDITION,EXPLORER) (INCLUDES VANS) 16V GAS/FLEX ROMEO ENG (Continued)
Timing Kit
3-387SGX
3-387SIF
Chain
Cam Thrust Plate Spacer
Cam Sprocket
Crank Sprocket
BT402
BT403
BT429
BT430
Damper
BD321
BD322
BG319
BG320
BG333
BG334
Timing Kit
3-387SGX
Chain
Camshaft Sprocket
Actuator
Variable Cam Timing
Solenoid
Crank Sprocket
Chain Tensioner
387
VCTA-1000
Chain Guide
106
FROM 10/2002 TO 2008 SILENT CHAIN; DOES NOT REQUIRE
(2) ADAPTER PLATES; KIT INCLUDES (2) [387], [BG333],
[BG334], [BD321], [BD322], [BT429], [BT430] (NOTE: DOES NOT
INCLUDE SPROCKETS) PLASTIC TENSIONER DESIGN
From 10/2002 TO 2007 KIT INCLUDES (2) [387], [S766], [S764],
[S869], [BG333], [BG334], [BD321], [BD322], [BT429], [BT430]
PLASTIC TENSIONER DESIGN
1997-2008 116 LINKS (2) REQ.
2001-2007
1997-2007 42 TEETH LEFT HAND
1997-2007 42 TEETH RIGHT HAND
1997-2000 21 TEETH 1 PC. DESIGN
2001-2007 21 TEETH ONE PIECE WITH HUB - HUB ACTS AS
SPACER
1997 To 10/2002 LEFT HAND, ADAPTER PLATES NOT REQUIRED
1997 To 10/2002 RIGHT HAND
From 10/2002 TO 2008 RIGHT HAND
From 10/2002 TO 2008 LEFT HAND, ADAPTER PLATES NOT
REQUIRED
1997-2008 LEFT HAND TENSIONER ARM
1997-2008 RIGHT HAND TENSIONER ARM
1997-2000 RIGHT HAND
1997-2000 LEFT HAND
2001-2008 RIGHT HAND (WINDSOR STYLE GUIDE)
2001-2008 LEFT HAND (WINDSOR STYLE GUIDE)
4.6-8 (281) SOHC ENG - 2006-10 - 8 Cyl. - 3.55 Bore (2006-10 EXPLORER, 2007-10 EXPLORER
SPORT TRAC, 2009-10 F150) 24 VALVE
Damper
35
387
S802SP
S764
S766
S843
S869
Chain Tensioner
Chain Guide
34
Description
VCTS-1000
S869
BT429
BT430
BD321
BD322
BG333
BG334
SILENT CHAIN; DOES NOT REQUIRE (2) ADAPTER PLATES;
KIT INCLUDES (2) [387], [BG333], [BG334], [BD321], [BD322],
[BT429], [BT430] (NOTE: DOES NOT INCLUDE SPROCKETS)
116 LINKS 2 REQ.
MOUNTING BOLT INCLUDED 2 REQ.
MOUNTING BOLT AND INSTALLATION GASKET INCLUDED 2
REQ.
21 TEETH
RIGHT HAND
LEFT HAND
LEFT HAND; ARM
RIGHT HAND; ARM
RIGHT HAND
LEFT HAND
289 ENG - 1964-68 - 8 Cyl. - 4.00 Bore (BRONCO,FALCON DELIVERY SEDAN,RANCHERO)
Cam Thrust Plate
3pc Set
Chain
Cam Sprocket
Crank Sprocket
MF125
3-358S
358
S406
S431
INCLUDES [358], [S406] & [S431]
58 LINKS
42 TEETH
21 TEETH
FORD TRUCK (Continued)
Line
No.
36
Part Title
38
39
Description
292 ENG - 1958-64 - 8 Cyl. - 3.75 Bore (COURIER DELIVERY, F-100-350, P-350, RANCHERO)
INCLUDES VANS
3pc Set
Chain
37
Part No
Cam Sprocket
Crank Sprocket
3-344S
161
344
S249
S250
INCLUDES [344], [S249] & [S250] W/STANDARD DUTY CHAIN
56 LINKS HEAVY DUTY
56 LINKS STANDARD DUTY
42 TEETH
21 TEETH
4.9 (300) ENG - 1965-96 - 6 Cyl. - 4.00 Bore (E,F,P SERIES 100-500 & BRONCO) CARB,F.I.
Gear Set
2750AS
2764S
2766AS
2766S
ALUMINUM - REPLACE AS SET ONLY; STANDARD DUTY
CAST IRON - REPLACE AS SET ONLY
ALUMINUM - REPLACE AS SET ONLY. HEAVY DUTY
INCLUDES [2766] & [2765] FIBER - REPLACE AS SET ONLY
302 ENG - 1956-63 - 8 Cyl. - 3 5/8 Bore (B700-750 BUS,C700- 750,C.O.E. 800,F700-800,T700-800,6
WHEEL)
Cam Gear
2733
60 TEETH
5.0 (302) OHV ENG - 1968-01 - 8 Cyl. - 4.00 Bore (SERIES 100-500,BRONCO,EXPLORER,
RANCHERO)
Cam Thrust Plate
MF125
MF126
3pc Set
3-163SB
3-358S
3-358SA
3-700SA
Chain
163
358
395
Cam Sprocket
Crank Sprocket
S406
S430
S612
S818
S431
S531
S819
1968 To 3/21/84
From 3/21/84 To 9/1/88 NOTE: IF USING 3-163SB SET OR S612
SPROCKET ON ENGINES BEFORE 3/21/84, YOU MUST USE
MF126 (3.356"L) THRUST PLATE RATHER THAN MF125 OR
STOCK (3.882"L) PLATE
From 9/1/87 TO 2000 INCLUDES [163], [S612] & [S531] ROLLER
TYPE CHAIN; USE AS COMPLETE SET ONLY
1968 To 5/2/72 INCLUDES [358], [S406] & [S431]
From 5/2/72 TO 1987 INCLUDES [358], [S430] & [S431]
1990-2001 INCLUDES [395], [S818], [S819] SILENT TYPE CHAIN;
USE AS COMPLETE SET ONLY
From 9/1/87 TO 2000 58 LINKS ROLLER CHAIN; FOR USE W/
S531 & S612
1968 To 9/1/87 58 LINKS
1990-2001 58 LINKS SILENT TYPE CHAIN; FOR USE W/ S818 &
S819
1968 To 5/2/72 42 TEETH
From 5/2/72 To 9/1/87 42 TEETH
From 9/1/87 TO 2000 42 TEETH MUST BE USED W/ 163 CHAIN
1990-2001 42 TEETH MUST BE USED W/ 370 CHAIN
1968 To 9/1/87 21 TEETH MUST BE USED W/ 358 CHAIN; OIL
SLINGER NOT REQUIRED
From 9/1/87 TO 2000 21 TEETH MUST BE USED W/ 163 CHAIN
1990-2001 21 TEETH MUST BE USED W/ 370 CHAIN
40
330 HD ENG - 1964-78 - 8 Cyl. - 3 7/8 Bore (SERIES 600-700)
41
330 ENG - 1964-77 - 8 Cyl. - 3.55 Bore (SERIES 100-500)
3pc Set
Chain
Cam Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-169SA
169
S410
3-169S
169
S410
S331
INCLUDES [169], [S410] & [S353]
64 LINKS
48 TEETH
INCLUDES [169], [S410] & [S331]
64 LINKS
48 TEETH
24 TEETH
107
FORD TRUCK (Continued)
Line
No.
42
Part Title
Part No
5.4-3,L,M,Z (330) SOHC ENG - 1997-14 - 8 Cyl. - 3.55 Bore (INCLUDES 1999-03 SUPERCHARGED)
(16 VALVE)
Timing Kit
3-391S
3-391SC
3-391SD
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
43
391
S764
S764
S766
S766
S843
S869
BT402
BT403
BT411
BT412
BT429
BT430
BG413
BG414
1997-2000 KIT INCLUDES (2) [391], [S843], [BT402], [BT403],
[BT411], [BT412], [BG413], [BG414] KIT DOES NOT INCLUDE
CAM SPROCKETS
2002-2013 KIT INCLUDES (2) [391], [S869], [BT429], [BT430],
[BT411], [BT412], [BG413], [BG414], KIT DOES NOT INCLUDE
CAM SPROCKETS
2002-2008 KIT INCLUDES (2) [391], [S764], [S766], [S869],
[BT429], [BT430], [BT411], BT412], [BG413], [BG414] INCLUDES
CAM SPROCKETS FOR NON INTEGRATED CAM SPROCKET
ENGINES
1997-2013 122 LINKS 2 REQ.
1997-2008 42 TEETH L.H.; EXC. F150,F250 & 2004 EXPEDITION
1999-2004 42 TEETH L.H. F150,F250
1997-2012 42 TEETH R.H.; EXC. F150,F250
1999-2004 42 TEETH R.H.; F150,F250
1997-2000 21 TEETH 1 PC. DESIGN
2001-2013 21 TEETH 1 PC. DESIGN WITH HUB; HUB ACTS AS
SPACER
1997-2001 L.H. TENSIONER, ADAPTER PLATES NOT REQUIRED
1997-2001 R.H. TENSIONER, ADAPTER PLATES NOT REQUIRED
1997-2013 L.H. TENSIONER ARM
1997-2013 R.H. TENSIONER ARM
2002-2013 R.H. TENSIONER
2002-2013 L.H. TENSIONER
1997-2013 L.H. W/GUIDE RAIL
1997-2013 USE LONGER TOP BOLT; FORD OE [W709818-S437]
(NOT SUPPLIED) R.H.
5.4-5,V (330) SOHC ENG - 2004-14 - 8Cyl. - 3.55 Bore (EXPEDITION,F150,F250 S.D.,F350 S.D.)
(LOBO - MEXICO) (24 VALVE) TRITON
Timing Kit
3-391SC
Chain
Camshaft Sprocket
Actuator
Variable Cam Timing
Solenoid
Variable Cam Timing
Housing
391
VCTA-1000
Crank Sprocket
Chain Tensioner
Chain Guide
108
Description
VCTS-1000
VCTH-1000L
VCTH-1000R
S869
BT411
BT412
BT429
BT430
BG413
BG414
2004-2013 KIT INCLUDES (2) [391], [S869], [BT429], [BT430],
[BT411], [BT412], [BG413], [BG414], KIT DOES NOT INCLUDE
CAM SPROCKETS
2004-2013 122 LINKS 2 REQ.
2004-2012 MOUNTING BOLT INCLUDED 2 REQ.
2004-2013 MOUNTING BOLT AND INSTALLATION GASKET
INCLUDED 2 REQ.
2004-2012 INCLUDES VARIABLE CAM SOLENOID & MOUNTING
GASKET LEFT HAND
2004-2012 INCLUDES VARIABLE CAM SOLENOID & MOUNTING
GASKET RIGHT HAND
2004-2013 21 TEETH
2004-2013 L.H. TENSIONER ARM
2004-2013 R.H. TENSIONER ARM
2004-2013 R.H. TENSIONER
2004-2013 L.H. TENSIONER
2004-2013 L.H.; GUIDE W/RAIL
2004-2013 USE LONGER TOP BOLT; FORD OE [W709818-S437]
(NOT SUPPLIED) R.H.
FORD TRUCK (Continued)
Line
No.
44
45
46
Part Title
Part No
Description
332 ENG - 1956-63 - 8 Cyl. - 3.8 Bore (B700-750,C700-900,TILT CAB, F700-900,T700-800,6 WHEEL)
MEDIUM DUTY
Cam Gear
2733
60 TEETH
332 ENG - 1960-63 - 8 Cyl. - 4.00 Bore (F-100 PICKUP,F-250 PICKUP,F-350 PICKUP) STANDARD
DUTY
Cam Gear
2733
60 TEETH
5.8 (351C) ENG - 1970-74 - 8 Cyl. - 4.00 Bore RANCHERO, GT VIN CODES H,M,Q,R (CLEVELAND)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-494SB
3-494SB
3-498SB
494
494
498
S420
S420
S475
S493
S493
1970-1972 INCLUDES [494], [S420] & [S493] W/2BC
1970-1974 INCLUDES [494], [S420] & [S493] W/4BC
1973-1974 INCLUDES [498], [S436] & [S475] W/2BC
1970-1972 48 LINKS W/2BC
1970-1974 48 LINKS W/4BC
1973-1974 48 LINKS W/2BC
1970-1972 36 TEETH W/2BC
1970-1974 36 TEETH W/4BC
1973-1974 18 TEETH W/2BC
1970-1972 18 TEETH W/2BC
1970-1974 18 TEETH W/4BC
47
5.8 (351M) ENG - 1977-81 - 8 Cyl. - 4.00 Bore VIN CODE "G" 1980-81, "H" 1975-79 (MODIFIED)
48
5.8-G,H,M (351W) ENG - 1969-85 - 8 Cyl. - 4.00 Bore SERIES 100-500, RANCHERO, BRONCO,
INCLUDES VANS (WINDSOR)
49
50
51
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-494SB
494
S420
S493
Cam Thrust Plate
MF125
MF126
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-358SA
358
S430
S431
INCLUDES [494], [S420] & [S493]
48 LINKS
36 TEETH
18 TEETH
1975 To 12/10/84
1984-1985 NOTE: IF USING [3-163SB] SET OR [S612]
SPROCKET ON ENGINES BEFORE 12/10/84, YOU MUST USE
[MF126] (3.356"L) THRUST PLATE RATHER THAN [MF125] OR
STOCK (3.882"L) PLATE
From 5/2/72 TO 1985 INCLUDES [358], [S430] & [S431] W/2BC
58 LINKS W/2BC
From 5/27/1972 TO 1985 42 TEETH W/2BC
21 TEETH W/2BC
5.8-R (351W) ENG - 1993-95 - 8 Cyl. - 4.00 Bore F150 LIGHTNING (WINDSOR)
Cam Thrust Plate
3pc Set
Chain
Cam Sprocket
Crank Sprocket
MF126
3-163SB
163
S612
S531
INCLUDES [163], [S612] & [S531] WITH ROLLER TYPE CHAIN
58 LINKS ROLLER TYPE CHAIN
42 TEETH
21 TEETH
5.8-H (351W) ENG - 1984-97 - 8 Cyl. - 4.00 Bore BRONCO,E150-350,ECONOLINE SD,F150-350,
CLUBWAGON(H.O.)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-163SB
163
S612
S531
1984-1996 INCLUDES [163], [S612] & [S531] W/ROLLER CHAIN
1984-1996 58 LINKS ROLLER TYPE CHAIN
1984-1996 42 TEETH
1984-1996 21 TEETH
352 ENG - 1965-67 - 8 Cyl. - 4.00 Bore (F100-F350,P-350,RANCHERO)
3pc Set
Chain
Cam Sprocket
3-169S
3-494SA
169
494
S410
INCLUDES [169], [S410] & [S331] HEAVY DUTY
INCLUDES [494], [S396] & [S321] STANDARD DUTY
64 LINKS HEAVY DUTY
48 LINKS STANDARD DUTY
48 TEETH HEAVY DUTY
Continued on Next Page
109
FORD TRUCK (Continued)
Line
No.
Part Title
Part No
Description
51
352 ENG - 1965-67 - 8 Cyl. - 4.00 Bore (F100-F350,P-350,RANCHERO) (Continued)
52
359 ENG - 1974-78 - 8 Cyl. - 4.05 Bore (SERIES 600-900)
53
360 ENG - 1968-76 - 8 Cyl. - 4.05 Bore (SERIES 100-500) INCLUDES VANS
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
S321
S331
3-169SA
169
S410
S353
3-169S
3-494SA
3-494SC
169
494
S396
S410
S448
S321
S331
18 TEETH STANDARD DUTY
24 TEETH HEAVY DUTY
INCLUDES [169], [S410] & [S353]
64 LINKS
48 TEETH
24 TEETH
1968-1973 INCLUDES [169], [S410] & [S331] HEAVY DUTY
1968-1973 INCLUDES [494], [S396] & [S321] STANDARD DUTY
1974-1976 INCLUDES [494], [S448] & [S321] STANDARD DUTY
1968-1973 64 LINKS HEAVY DUTY
48 LINKS STANDARD DUTY
1968-1973 36 TEETH STANDARD DUTY
1968-1973 48 TEETH HEAVY DUTY
1974-1976 36 TEETH STANDARD DUTY
18 TEETH STANDARD DUTY
1968-1973 24 TEETH HEAVY DUTY
54
361 ENG - 1964-78 - 8 Cyl. - 4.05 Bore
55
6.1 (370) ENG - 1980-91 - 8 Cyl. - 4.05 Bore (SERIES 600-900, SCHOOL BUS) MEDIUM DUTY
56
57
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-169SA
169
S410
S353
3-168SC
168
S438
S401
INCLUDES [169], [S410] & [S353]
64 LINKS
48 TEETH
24 TEETH
INCLUDES [168], [S438] & [S401]
66 LINKS
44 TEETH
22 TEETH
6.4 (389) ENG - 1975-78 - 8 Cyl. - 4.05 Bore (SERIES 600-900)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-169SA
169
S410
S353
INCLUDES [169], [S410] & [S353]
64 LINKS
48 TEETH
24 TEETH
6.4-H,M (390) ENG - 1968-76 - 8 Cyl. - 4.05 Bore (SERIES 100-500)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-169S
3-494SA
3-494SC
169
494
S396
S410
S448
S321
S331
1968-1973 INCLUDES [169], [S410] & [S331] HEAVY DUTY
1968-1973 INCLUDES [494], [S396] & [S321] STANDARD DUTY
1974-1976 INCLUDES [494], [S448] & [S321] STANDARD DUTY
1968-1973 64 LINKS HEAVY DUTY
48 LINKS STANDARD DUTY
1968-1973 36 TEETH STANDARD DUTY
1968-1973 48 TEETH HEAVY DUTY
1974-1976 36 TEETH STANDARD DUTY
18 TEETH STANDARD DUTY
1968-1973 24 TEETH HEAVY DUTY
58
391 ENG - 1964-78 - 8 Cyl. - 4.05 Bore (SERIES 600-900)
59
6.6-S,Z (400) ENG - 1977-82 - 8 Cyl. - 4.00 Bore (SERIES 100-500 BRONCO)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Continued on Next Page
110
3-169SA
169
S410
S353
3-494SB
494
INCLUDES [169], [S410] & [S353]
64 LINKS
48 TEETH
24 TEETH
INCLUDES [494], [S420] & [S493]
48 LINKS
FORD TRUCK (Continued)
Line
No.
Part Title
Part No
Description
59
6.6-S,Z (400) ENG - 1977-82 - 8 Cyl. - 4.00 Bore (SERIES 100-500 BRONCO) (Continued)
60
401 ENG - 1958-76 - 8 Cyl. - 4 1/8 Bore (SERIES 600-900)
61
Cam Sprocket
Crank Sprocket
Crank Gear
S420
S493
2737
55 TEETH
6.8-S (415) SOHC ENG - 1997-13 - 10 Cyl - 3.55 Bore (E SERIES,F SERIES,EXCURSION) 20V
TRITON
Timing Kit
3-391SB
3-391SD
3-391SG
Chain
Cam Thrust Plate Spacer
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
391
S802SP
S764
S766
S843
S869
BT402
BT403
BT411
BT412
BT429
BT430
BG413
BG414
62
36 TEETH
18 TEETH
1997-2001 KIT INCLUDES (2) [391], [S764], [S766], [S843],
[BT402], [BT403], [BT411], [BT412], [BG413], [BG414] (USES
UPDATED FINE FINISH CHAIN)
2003-2011 KIT INCLUDES (2) [391], [S764], [S766], [S869],
[BT429], [BT430], [BT411], BT412], [BG413], [BG414] USES
UPDATED FINE FINISH CHAIN EXCLUDES 2005 EXCURSION
2002 KIT INCLUDES (2) [391], [S764], [S766], [S869], [BG413],
[BG414], [BT402], [BT403], [BT411] & [BT412]
1997-2012 122 LINKS 2 REQ. UPDATED FINE FINISH CHAIN
1997-2012
1997-2011 42 TEETH L.H. EXC 2005 EXCURSION
1997-2012 42 TEETH R.H. EXC. 2005 EXCURSION
1997-2001 21 TEETH (1 PC. DESIGN)
2002-2012 21 TEETH HUB DESIGN WITH TIMING MARK
1997-2002 L.H. (ASSY), ADAPTER PLATES NOT REQUIRED
1997-2002 R.H. (ASSY)
1997-2012 L.H. TENSIONER ARM
1997-2012 R.H. TENSIONER ARM
2003-2012 R.H. PLASTIC TENSIONER UPDATE
2003-2012 L.H. PLASTIC TENSIONER UPDATE
1997-2012 L.H. (WITH ADDED GUIDERAIL, WILL RETOFIT OLD
STYLE GUIDE)
1997-2012 USE LONGER TOP BOLT; FORD OE [W709818-S437]
(NOT SUPPLIED) R.H.
6.8-Y (415) SOHC ENG. - 2005-13 - 10 Cyl. - 3.55 Bore F250SD,F350SD,F450SD,F550SD,F53 30V
(TRITON)
Timing Kit
3-391SD
Chain
391
Cam Sprocket
S764
S766
Crank Sprocket
Chain Tensioner
Chain Guide
S869
BT411
BT412
BT429
BT430
BG413
BG414
2005-2010 KIT INCLUDES (2) [391], [S764], [S766], [S869],
[BT429], [BT430], [BT411], BT412], [BG413], [BG414] INCLUDES
CAM SPROCKETS FOR NON INTEGRATED CAM SPROCKET
ENGINES
2005-2010 122 LINKS (2) REQUIRED; (UPDATED FINE FINISH
CHAIN)
2005-2010 42 TEETH L.H.; FOR NON INTEGRATED CAM
SPROCKET ENGINES
2005-2010 42 TEETH R.H.; FOR NON INTEGRATED CAM
SPROCKET ENGINES
2005-2010 21 TEETH HUB DESIGN WITH TIMING MARK
2008-2010 L.H. TENSIONER ARM
2005-2010 R.H. TENSIONER ARM
2005-2010 R.H. UPDATED PLASTIC TENSIONER
2005-2010 L.H. UPDATED PLASTIC TENSIONER
2005-2010 L.H. MANUFACTURED WITH ADDED GUIDERAIL,
WILL RETROFIT OLD STYLE GUIDE
2007-2010 USE LONGER TOP BOLT; FORD OE [W709818-S437]
(NOT SUPPLIED) R.H. (EXCLUDES 2007 F350SD)
111
FORD TRUCK (Continued)
Line
No.
Part Title
Part No
Description
63
6.9 (420) DIESEL ENG - 1983-87 - 8 Cyl. - 4.00 Bore
64
7.0 (428) OHV ENG - 1968-69 - 8 Cyl. - 4.13 Bore (RANCHERO) INC. COBRA JET/SUPER CJ
Gear Set
Cam Gear
Crank Gear
3pc Set
Chain
Cam Sprocket
Crank Sprocket
65
66
67
68
3342S
3342
3341
3-169S
3-494SA
169
494
S410
S321
S331
INCLUDES [3341] & [3342]
106 TEETH
53 TEETH
INCLUDES [169], [S410] & [S331] HEAVY DUTY
INCLUDES [494], [S396] & [S321] STANDARD DUTY
64 LINKS HEAVY DUTY
48 LINKS STANDARD DUTY
48 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
24 TEETH HEAVY DUTY
7.0 (429) OHV ENG - 1970-73 - 8 Cyl. - 4.36 Bore (RANCHERO) (INC. COBRA JET/SUPER CJ,
POLICE ENG) STANDARD DUTY
3pc Set
3-491S
3-491SA
Chain
Cam Sprocket
Crank Sprocket
491
S420
S493
1972-1973 INCLUDES [491], [S420], [S421]
1970-1971 INCLUDES (491] CHAIN, [S420] CAM SPROCKET,
[S493] CRANK SPROCKET
52 LINKS
36 TEETH
1970-1971 18 TEETH
7.0 (429) ENG - 1980-98 - 8 Cyl. - 4.36 Bore (SERIES 600-800) GAS & LPG MEDIUM DUTY
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-168SC
168
S438
S401
INCLUDES [168], [S438] & [S401]
66 LINKS
44 TEETH
22 TEETH
7.3 (445) DIESEL ENG - 1988-03 - 8 Cyl. - 4.11 Bore (INCLUDES VANS) NATURAL ASPIRATED,D.I.
TURBO DIESEL
Gear Set
Cam Gear
Crank Gear
3342S
3342
3341
1988-1994 INCLUDES [3341] & [3342] EXC. 1994 D.I. TURBO
1988-1994 106 TEETH EXC. 1994 D.I. TURBO
1988-1994 53 TEETH EXC. 1994 D.I. TURBO
7.5 (460) ENG - 1973-97 - 8 Cyl. - 4.36 Bore (SERIES E100-350, F100-350, F53 MOTORHOME,
ECONOLINE S.D., F S.D.,RANCHERO) (INCLUDES VANS)
3pc Set
3-168SD
3-168SE
3-491S
Chain
168
491
S420
S438
S685
S817
Cam Sprocket
Crank Sprocket
1988-1992 INCLUDES [168], [S438] & [S685]
1993-1997 INCLUDES [168], [S438] & [S817]
1974-1987 INCLUDES [491], [S420], [S421] F100-F350 & E250E350
1988-1997 66 LINKS
1973-1987 52 LINKS F100-350 & E250-350
1973-1987 36 TEETH F100-350 & E250-350
1988-1997 44 TEETH
1988-1992 22 TEETH
1993-1997 22 TEETH
69
475 ENG - 1973-79 - 8 Cyl. - 4 1/2 Bore (SERIES 600-900) MEDIUM DUTY
70
477 ENG - 1958-81 - 8 Cyl. - 4 1/2 Bore (SERIES 600-900)
71
112
Crank Gear
Crank Gear
2737
2737
55 TEETH
55 TEETH
534 ENG - 1958-81 - 8 Cyl. - 4 1/2 Bore (SERIES 600-900)
Crank Gear
2737
55 TEETH
GMC/CHEVY TRUCKS
Year
Line
Year
Line
1.6-6 1588CC SOHC
1994-00
1
1.6-U (98) SOHC
1989-95
2
261
1954-62
32
4.3-B (262)
1990-91
33
1.8 (111) SOHC
1972-75
1.8 (111) SOHC
1976-82
3
4.3-N (262)
1985-86
34
6.0 (364) OHV
1999-13
62
4
4.3-W (262) OHV
1992-02
35
6.0 (366)
1968-79
63
1.9-A (119) OHC
2.0-Y (122) OHV
1982-85
5
4.3-X (262)
2002-14
36
6.0 (366)
1980-98
64
1983-84
6
4.3-X (262)
1996-99
37
370
1957-59
2.2 DIESEL
65
1981-83
7
4.3-Z (262) OHV
1985-96
38
2.2-4,5,H (134) OHV
1994-03
8
1973-74
66
2.2-S DIESEL
1984-85
9
8 Cyl.
6 Cyl.
265
1955-57
39
2.4-C,K,W (145) DOHC
2010-14
10
267
1979-82
40
6.2 (379) DIESEL
1982-93
66
2.5-A (151) OHV
1991-93
11
6.2-8 (378) OHV
2007-08
67
2.5-E (151) OHV
1985-91
12
6 Cyl.
6.2-2,F (376) OHV
2009-13
68
153 (OHV)
1963-65
13
2.8-8 (169) DOHC
2004-06
14
1982-93
15
2007-12
16
194 (OHV)
1963-66
17
200 (OHV)
1978-79
18
3.0-5,Y (182) DOHC
2010-12
3.4-F (207) OHV
2005-09
4 Cyl.
Engine
6 Cyl.
2.8-B & R (173)
4 Cyl.
Engine
6 Cyl. (Continued)
6 Cyl.
270 OHV
3.5-6 (211) DOHC
6.5 (395) OHV DIESEL
1992-02
69
42
396 (400)
1968-70
70
288
1955
43
400
1974-80
71
6 Cyl.
1963-89
8 Cyl.
44
401
1960-65
72
401
1966-72
73
74
8 Cyl.
45
402 (400)
1971-72
302
1952-59
46
409
1962-65
75
19
305
1960-69
47
7.0 (427)
1980-98
76
20
8 Cyl.
5.0 (305) OHV
1976-02
47
1973-74
77
307
1968-73
48
1970-00
78
478,478M
1962-74
79
1965-74
80
317
1955-58
49
22
322
1956-59
50
3.6-3,7,D (217) DOHC
2007-15
23
324
1955-56
51
5.3 (323,325) OHV
1999-13
52
2007-12
6 Cyl.
1999-13
6 Cyl.
1942-53
6 Cyl.
62
1957-67
217
3.7-E (223) DOHC
1965-68
283 ENG
8 Cyl.
21
5 Cyl.
8 Cyl.
Line
41
2004-06
6 Cyl.
8 Cyl.
Year
1941-62
4.8-A,C,V (294) OHV
5 Cyl.
351 C,E,M
379
4.8-T (292)
2.9-9 (178) DOHC
6 Cyl.
Engine
24
6 Cyl.
432 & 432M
8 Cyl.
7.4 (454)OHV
6 Cyl.
327 OHV
1964-69
53
D478,DH478 DIESEL
347
1957
54
8 Cyl.
229 (OHV)
1980-84
25
348
1958-65
55
8.1-G (496) OHV
2001-07
81
230 (OHV)
1963-69
26
5.7 (350)
1968-79
56
8.1-E,G (496) OHV
2001-09
82
1970-72
83
1960-65
84
231 (OHV)
1978-84
27
5.7-N (350)
1983-84
57
637
235
1942-62
28
5.7-Z (350)
1978-81
58
248
1939-55
29
5.7-K (350)
1987-96
59
12 Cyl.
250
1966-84
30
5.7-L, M & P (350)
1980-88
60
4.2-S (256) DOHC
2002-09
31
5.7-R (350) OHV
1996-02
61
Line
No.
Part Title
Part No
702
Description
1
1.6-6 1588CC SOHC ENG - 1994-00 - 4 Cyl. - 2.96 Bore (GEO TRACKER--SUZUKI ENG. M.F.I.)
2
1.6-U (98) SOHC ENG - 1989-95 - 4 Cyl. - 2.95 Bore (GEO TRACKER--SUZUKI ENG. T.B.I.)
3
1.8-N (111) SOHC ENG - 1972-75 - 4 Cyl. - 3.31 Bore (LUV, LUV PICK UP)
Belt
Belt
Belt Tensioner
Chain
Cam Sprocket
Crank Sprocket
Damper
B-0164
B-0212
B-0164
BT139
3DR58
3DR84
S508
S527
BD37
1994-1997 95 TEETH EXC. CALIF. EMISSIONS
103 TEETH W/CALIF. EMISSIONS
95 TEETH
58 LINKS LAY SHAFT CHAIN
84 LINKS CAMSHAFT TIMING CHAIN
23 TEETH PRIMARY
40 TEETH SECONDARY
PRIMARY
113
GMC/CHEVY TRUCKS (Continued)
Line
No.
4
5
6
7
8
9
10
Part Title
Part No
1.8-N (111) SOHC ENG - 1976-82 - 4 Cyl. - 3.31 Bore (LUV)
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Damper
3SR94-1
3SR94
S500
S501
BT17
BT63
BD34
KIT INCLUDES [3SR94], [S500], [S501], [BT17], [BT63] & [BD34]
94 LINKS
38 TEETH
19 TEETH
ADJUSTER FOR TENSIONER
TENSIONER
1.9-A (119) OHC ENG - 1982-85 - 4 Cyl. - 3.425 Bore
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Damper
3SR94-2
3SR94
S500
S501
BT61
BT63
BD34
KIT INCLUDES [3SR94], [S500], [S501], [BT63], [BT61] & [BD34]
94 LINKS
38 TEETH
19 TEETH
ADJUSTER
TENSIONER
2.0-Y (122) OHV ENG - 1983-84 - 4 Cyl. - 3.39 Bore (S10,BLAZER,JIMMY)
3pc Set
Chain
Cam Thrust Plate Spacer
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-370S
395
MG221
S558
S549
BT5115
INCLUDES [395], [S558], [S549] & [MPC-393]
58 LINKS
40 TEETH
20 TEETH
2.2 DIESEL ENG - 1981-83 - 4 Cyl. - 88 MM Bore (LUV 11 & 12--ISUZU ENG)
Belt
B-075
87 TEETH
2.2-4,5,H (134) OHV ENG - 1994-03 - 4 Cyl. - 3.500 Bore (1994 - 03 2.2-4, 2000-02 2.2-5) (S10,
SONOMA)
3pc Set
3-370SA
3-395S
Chain
Cam Thrust Plate Spacer
Cam Sprocket
Crank Sprocket
Chain Tensioner
395
MG221
S774
S549
BT5115
INCLUDES [395], [S774], [S549] & [MPC-393]
INCLUDES [370], [S774], [S549], [BT5115] & [MPC-393] RETRO
FIT FINE FINISH CHAIN SET, CHECK FOR POSSIBLE OILING
PROBLEM WHEN INSTALLING SET.
58 LINKS RETRO FIT FINE FINISH CHAIN
1994-1997
40 TEETH
20 TEETH
2.2-S DIESEL ENG - 1984-85 - 4 Cyl. - 88 MM Bore
Belt
B-075
87 TEETH
2.4-C,K,W (145) DOHC ENG - 2010-14 - 4 Cyl. - 3.46 Bore (CAPTIVA SPORT,EQUINOX,TERRAIN)
16V ECOTEC
Timing Kit
3-4201SX
Chain
4201F
4202F
S849
S851
BT5383
Crank Sprocket
Chain Tensioner
BT5481
Chain Guide
Continued on Next Page
114
Description
BG5375
BG5381
2010-2012 KIT INCLUDES [4201F], [BT5481], [BG5375], [BG5381],
[BG5382], [5467N] (DOES NOT INCLUDE SPROCKETS)
CAMSHAFT CHAIN KIT
2010-2012 148 LINKS CAMSHAFT CHAIN
2010-2012 134 LINKS BALANCE SHAFT CHAIN
2010-2012 23 TEETH OUTER
2010-2012 42 TEETH INNER
2010-2012 EXC. CAPTIVA SPORT; BALANCE SHAFT CHAIN
TENSIONER; LOWER
2010-2012 NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mm
O.A.L CAMSHAFT CHAIN TENSIONER; RIGHT HAND UPPER
2010-2012 CAMSHAFT CHAIN GUIDE; RIGHT HAND
2010-2012 CAMSHAFT CHAIN GUIDE; LEFT HAND
GMC/CHEVY TRUCKS (Continued)
Line
No.
10
Part Title
Part No
Description
2.4-C,K,W (145) DOHC ENG - 2010-14 - 4 Cyl. - 3.46 Bore (CAPTIVA SPORT,EQUINOX,TERRAIN)
16V ECOTEC (Continued)
Chain Guide
BG5382
BG5384
BG5385
BG5386
2010-2012 CAMSHAFT CHAIN GUIDE; CENTER UPPER
2010-2012 BALANCE SHAFT CHAIN GUIDE; RIGHT HAND
LOWER
2010-2012 BALANCE SHAFT CHAIN GUIDE; LEFT HAND LOWER
2010-2012 BALANCE SHAFT CHAIN GUIDE; UPPER
11
2.5-A (151) OHV ENG - 1991-93 - 4 Cyl. - 4.000 Bore (INCLUDES VANS) (PONTIAC)
12
2.5-E (151) OHV ENG - 1985-91 - 4 Cyl. - 4.000 Bore (INCLUDES VANS) (PONTIAC)
13
14
Gear Set
Cam Gear
Crank Gear
Cam Thrust Plate Spacer
Gear Set
Cam Gear
Crank Gear
Cam Thrust Plate Spacer
Gear Set
Cam Gear
Crank Gear
Cam Thrust Plate Spacer
FIBER INCLUDES [2542] & [2537]
54 TEETH FIBER
27 TEETH
2525S
2524
2542
2501
MG221
INCLUDES [2524] & [2501]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
2.8-8 (169) DOHC ENG - 2004-06 - 4 Cyl. - 3.66 Bore (CANYON,COLORADO)
Timing Kit
3-195SC
Chain
195
728F
S908A
S913
BT5511
Chain Guide
16
2542S
2542
2537
MG221
FIBER INCLUDES [2542] & [2537]
54 TEETH FIBER
27 TEETH
153 (OHV) ENG - 1963-65 - 4 Cyl. - 3.88 Bore (INCLUDES VANS)
Cam Sprocket
Crank Sprocket
Chain Tensioner
15
2542S
2542
2537
MG221
BT5512
BG5504
BG5506
BG6006
BG6007
INCLUDES [195], [728F], [S908A], [S913], [BT5511], [BT5512],
[BG5504], [BG5506], [BG6006], [BG6007]
168 LINKS TIMING CHAIN
110 LINKS BALANCE SHAFT CHAIN
58 TEETH
29 TEETH
REPLACES 1ST DESIGN SPRING TYPE TENSIONER;
CONVERT TO HYDRAULIC TENSIONER BY USING
CONVERSION KIT #89018114; (NOT INCLUDED) BALANCE
SHAFT CHAIN TENSIONER
TIMING CHAIN TENSIONER
TIMING CHAIN GUIDE; R.H.
TIMING CHAIN GUIDE; L.H.
TIMING CHAIN GUIDE; UPPER
BALANCE SHAFT CHAIN GUIDE
2.8-B & R (173) ENG - 1982-93 - V6 - 3.504 Bore (1982-85 2.8-B & 1986-93 2.8-R) (1982-93 2WD)
(1983-93 4WD)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-373S
373
S506
S511
BD59
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
2.9-9 (178) DOHC ENG - 2007-12 - 4 Cyl. - 3.76 Bore (CANYON,COLORADO)
Timing Kit
3-195SA
Chain
195
728F
S908A
S913
Cam Sprocket
Crank Sprocket
INCLUDES [195], [728F], [S908A], [S913], [BT5511], [BT5512],
[BG5504], [BG5510], [BG6006], [BG6007]
168 LINKS TIMING CHAIN
110 LINKS BALANCE SHAFT CHAIN
58 TEETH
29 TEETH
Continued on Next Page
115
GMC/CHEVY TRUCKS (Continued)
Line
No.
16
Part Title
18
Chain Tensioner
BT5511
BT5512
BG5504
BG5510
BG6006
BG6007
Gear Set
Cam Gear
Crank Gear
Cam Thrust Plate Spacer
2525S
2524
2542
2501
MG221
3pc Set
Crank Sprocket
3-163S
3-499SA
163
499
S288
S390
S289
S505
INCLUDES [163], [S288] & [S289] H.D.
INCLUDES [499], [S390] & [S505]
58 LINKS H.D.
46 LINKS
44 TEETH H.D.
36 TEETH
22 TEETH H.D.
18 TEETH
3.0-5,Y (182) DOHC ENG - 2010-12 - 6 Cyl. - 3.50 Bore (CAPTIVA SPORT,EQUINOX,TERRAIN) 24V
LF1,LFW GAS/FLEX ENG.
Timing Kit
3-753S
Chain
753
754
S921
S930
S932
BT5535
Crank Sprocket
Idler Sprocket
Chain Tensioner
BT5536
BT5537
Chain Guide
BG5530
BG5531
BG5532
BG5533
BG5534
BG5548
2010-2011 INCLUDES [753], (2) [754], [S921], [S930], [S932],
[BT5535], [BT5536], [BT5537], [BG5548], [BG5530], [BG5531],
[BG5532], [BG5533], [BG5534] FOR ENGINES USING SILENT
TYPE CHAINS
96 LINKS PRIMARY CHAIN; LOWER
2010-2011 114 LINKS SECONDARY CHAIN; UPPER; 2 REQUIRED
30 TEETH
22 TEETH INCLUDES MOUNTING BOLT LEFT HAND
2010-2011 22 TEETH INCLUDES MOUNTING BOLT RIGHT HAND
INCLUDES GASKET AND 2 MOUNTING BOLTS SECONDARY
CHAIN; LEFT HAND
INCLUDES GASKET AND 2 MOUNTING BOLTS SECONDARY
CHAIN; RIGHT HAND
INCLUDES MOUNTING GASKET AND 2 MOUNTING BOLTS
PRIMARY CHAIN
INCLUDES (2) MOUNTING BOLTS PRIMARY CHAIN; UPPER
INCLUDES 2 MOUNTING BOLTS SECONDARY CHAIN; LEFT
HAND
INCLUDES 2 MOUNTING BOLTS SECONDARY CHAIN; RIGHT
HAND
PRIMARY CHAIN; RIGHT HAND
PRIMARY CHAIN; LEFT HAND; LOWER
2010-2011 PRIMARY CHAIN; RIGHT HAND; LOWER
3.4-F (207) OHV ENG - 2005-09 - 6 Cyl. - 3.62 Bore (EQUINOX LS,LT)
Timing Kit
3pc Set
Continued on Next Page
116
INCLUDES [2524] & [2501]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
200 (OHV) ENG - 1978-79 - V6 - 3 1/2 Bore
Cam Sprocket
20
REPLACES 1ST DESIGN SPRING TYPE TENSIONER;
CONVERT TO HYDRAULIC TENSIONER BY USING
CONVERSION KIT #89018114; (NOT INCLUDED) BALANCE
SHAFT CHAIN TENSIONER
TIMING CHAIN TENSIONER
TIMING CHAIN GUIDE; R.H.
TIMING CHAIN GUIDE; L.H.
TIMING CHAIN GUIDE; UPPER
BALANCE SHAFT CHAIN GUIDE
194 (OHV) ENG - 1963-66 - 6 Cyl. - 3.56 Bore (CHEVY 1964-66) (GMC 1963-66) (INCLUDES VANS)
Chain
19
Description
2.9-9 (178) DOHC ENG - 2007-12 - 4 Cyl. - 3.76 Bore (CANYON,COLORADO) (Continued)
Chain Guide
17
Part No
3-700SB
3-700S
2005-2006 KIT INCLUDES [700], [S847], [S848], [BD600]
2005-2006 INCLUDES [700], [S847], [S848]
GMC/CHEVY TRUCKS (Continued)
Line
No.
Part Title
Part No
Description
20
3.4-F (207) OHV ENG - 2005-09 - 6 Cyl. - 3.62 Bore (EQUINOX LS,LT) (Continued)
21
3.5-6 (211) DOHC ENG - 2004-06 - 5 Cyl. - 3.66 Bore (CANYON,COLORADO)
Chain
Cam Sprocket
Crank Sprocket
Damper
700
S848
S847
BD600
Timing Kit
3-195SC
Chain
195
728F
S908A
S913
BT5511
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
BT5512
BG5504
BG5506
BG6006
BG6007
2005-2007 80 LINKS
2005-2006 50 TEETH
25 TEETH
INCLUDES [195P], [728FP], [S908AP], [S913P], [BT5511P],
[BT5512P], [BG5504P], [BG5506P], [BG6006P], [BG6007P]
168 LINKS TIMING CHAIN
110 LINKS BALANCE SHAFT CHAIN
58 TEETH
29 TEETH
REPLACES 1ST DESIGN SPRING TYPE TENSIONER;
CONVERT TO HYDRAULIC TENSIONER BY USING
CONVERSION KIT #89018114; (NOT INCLUDED) BALANCE
SHAFT CHAIN TENSIONER
TIMING CHAIN TENSIONER
TIMING CHAIN GUIDE; R.H.
TIMING CHAIN GUIDE; L.H.
TIMING CHAIN GUIDE; UPPER
BALANCE SHAFT CHAIN GUIDE
22
217 ENG - 1942-53 - 6 Cyl. - 3 1/2 Bore
23
3.6-3,7,D (217) DOHC ENG - 2007-15 - 6 Cyl. - 3.70 Bore
(ACADIA,CANYON,COLORADO,EQUINOX,TERRAIN,TRAVERSE) (CAPTIVA SPORT - MEXICO) 24V
GAS/FLEX ENG.
Gear Set
Cam Gear
Crank Gear
2516S
2514
2501
Timing Kit
3-753S
Chain
753
754
Idler Sprocket
Chain Tensioner
S930
S932
BT5535
BT5536
BT5537
Chain Guide
BG5530
BG5531
BG5532
BG5533
BG5534
BG5548
INCLUDES [2514] & [2501]
54 TEETH ALUM
27 TEETH
2007-2012 INCLUDES [753], (2) [754], [S921], [S930], [S932],
[BT5535], [BT5536], [BT5537], [BG5548], [BG5530], [BG5531],
[BG5532], [BG5533], [BG5534] EXCLUDES 2008-09 EQUINOX;
FOR ENGINES USING SILENT TYPE CHAINS
96 LINKS PRIMARY CHAIN; LOWER EXCLUDES 2008-09
EQUINOX
114 LINKS SECONDARY CHAIN; UPPER; 2 REQUIRED;
EXCLUDES 2008-09 EQUINOX
2007-2012 22 TEETH INCLUDES MOUNTING BOLT LEFT HAND
2007-2012 22 TEETH INCLUDES MOUNTING BOLT RIGHT HAND
2007-2012 INCLUDES GASKET AND 2 MOUNTING BOLTS
SECONDARY CHAIN; LEFT HAND
2007-2012 INCLUDES GASKET AND 2 MOUNTING BOLTS
SECONDARY CHAIN; RIGHT HAND
2007-2012 INCLUDES MOUNTING GASKET AND 2 MOUNTING
BOLTS PRIMARY CHAIN
2007-2012 INCLUDES (2) MOUNTING BOLTS PRIMARY CHAIN;
UPPER
2007-2012 INCLUDES 2 MOUNTING BOLTS SECONDARY
CHAIN; LEFT HAND
2007-2012 INCLUDES 2 MOUNTING BOLTS SECONDARY
CHAIN; RIGHT HAND
2007-2012 PRIMARY CHAIN; RIGHT HAND
2007-2012 PRIMARY CHAIN; LEFT HAND; LOWER
2007-2012 PRIMARY CHAIN; RIGHT HAND; LOWER
117
GMC/CHEVY TRUCKS (Continued)
Line
No.
24
Part Title
Timing Kit
3-195SA
Chain
195
728F
S908A
S913
BT5511
Chain Guide
3pc Set
Cam Sprocket
Crank Sprocket
27
28
29
30
BT5512
BG5504
BG5510
BG6006
BG6007
3-163S
3-499SA
163
499
S288
S390
S289
S505
INCLUDES [163], [S288] & [S289] H.D.
INCLUDES [499], [S390] & [S505]
58 LINKS H.D.
46 LINKS
44 TEETH H.D.
36 TEETH
22 TEETH H.D.
18 TEETH
230 (OHV) ENG - 1963-69 - 6 Cyl. - 3 7/8 Bore
Gear Set
Cam Gear
Crank Gear
Cam Thrust Plate Spacer
2525S
2524
2542
2501
MG221
INCLUDES [2524] & [2501]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
231 (OHV) ENG - 1978-84 - V6 - 3.78,3.80 Bore (CABALLERO,EL CAMINO) BUICK ENG.
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-359SB
359
S610
S323
BD44
BD45
INCLUDES [359], [S610] & [S323]
54 LINKS
40 TEETH
20 TEETH
1978-1984 RIGHT HAND W/SPRING
1978-1981 LEFT HAND
235 ENG - 1942-62 - 6 Cyl. - 3.56 Bore (CHEVY ONLY)
Gear Set
Cam Gear
Crank Gear
2516S
2500
2514
2501
INCLUDES [2514] & [2501]
54 TEETH FIBER
54 TEETH ALUM
27 TEETH
248 ENG - 1939-55 - 6 Cyl. - 3.72 Bore (GMC ONLY)
Cam Gear
2500
2514
54 TEETH FIBER
54 TEETH ALUM
250 ENG - 1966-84 - 6 Cyl. - 3.88 Bore (INCLUDES VANS) (GAS & LPG)
Gear Set
2525S
2528S
2538S
Continued on Next Page
118
INCLUDES [195], [728F], [S908A], [S913], [BT5511], [BT5512],
[BG5504], [BG5510], [BG6006], [BG6007]
168 LINKS TIMING CHAIN
110 LINKS BALANCE SHAFT CHAIN
58 TEETH
29 TEETH
REPLACES 1ST DESIGN SPRING TYPE TENSIONER;
CONVERT TO HYDRAULIC TENSIONER BY USING
CONVERSION KIT #89018114; (NOT INCLUDED) BALANCE
SHAFT CHAIN TENSIONER
TIMING CHAIN TENSIONER
TIMING CHAIN GUIDE; R.H.
TIMING CHAIN GUIDE; L.H.
TIMING CHAIN GUIDE; UPPER
BALANCE SHAFT CHAIN GUIDE
229 (OHV) ENG - 1980-84 - V6 - 3.736 Bore
Chain
26
Description
3.7-E (223) DOHC - 2007-12 - 5 Cyl. - 3.76 Bore (CANYON, COLORADO)
Cam Sprocket
Crank Sprocket
Chain Tensioner
25
Part No
1966-1976 INCLUDES [2524] & [2501] S.D. W/INT. MANIFOLD &
CYL. HEAD CAST SEPARATE
1976-1984 ALUM. CAM GEAR & STEEL CRANK GEAR H.D.
W/INTAKE MANIFOLD & CYL. HEAD CAST SEPARATE
1975-1976 ALUM. INCLUDES [2524] & [2537] TO EARLY 1976
W/INTAKE MANIFOLD CAST AS INTEGRAL PART OF CYL. HEAD
GMC/CHEVY TRUCKS (Continued)
Line
No.
30
Part Title
Part No
250 ENG - 1966-84 - 6 Cyl. - 3.88 Bore (INCLUDES VANS) (GAS & LPG) (Continued)
Gear Set
2540S
Cam Gear
2524
2526
2542
Crank Gear
2501
2527
2537
31
Cam Thrust Plate Spacer
MG221
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
33
34
35
1976-1984 INCLUDES [2526] & [2541] LATE 1976-84 W/INTAKE
MANIFOLD CAST AS INTEGRAL PART OF CYL. HEAD
1966-1976 54 TEETH ALUMINUM 1966 TO EARLY 76 W/GEAR
STAMPED #14
1976-1984 54 TEETH LATE 1976-84 W/GEAR STAMPED #20
1966-1976 54 TEETH FIBER 1966 TO EARLY 76 W/GEAR
STAMPED #14
1966-1976 27 TEETH W/INT. MANIFOLD & CYL. HEAD CAST
SEPARATE
1976-1984 27 TEETH H.D. W/INTAKE MANIFOLD & CYL. HEAD
CAST SEPARATE
1975-1976 27 TEETH 1975 TO EARLY 76 W/GEAR STAMPED #71
AND INTAKE MANIFOLD CAST AS INTEGRAL PART OF CYL.
HEAD
4.2-S (256) ENG - 2002-09 - 6 Cyl. - 3.66 Bore (ENVOY,TRAILBLAZER) VORTEC
3-195S
3-195SB
32
Description
195
S908A
S913
BT5512
BG5504
BG5506
BG5510
BG6006
2002-2007 INCLUDES [195], [S908A], [S913], [BT5512], [BG5504],
[BG5506], [BG6006]
2008-2009 INCLUDES [195], [S908A], [S913], [BT5512], [BG5504],
[BG5510], [BG6006]
168 LINKS
58 TEETH
29 TEETH
RIGHT HAND
2002-2007 LEFT HAND
2008-2009 LEFT HAND
2002-2007 UPPER
261 ENG - 1954-62 - 6 Cyl. - 3.75 Bore (CHEVY ONLY) (NOT MANUFACTURED IN 1959)
Gear Set
Cam Gear
Crank Gear
2516S
2500
2514
2501
INCLUDES [2514] & [2501]
54 TEETH FIBER
54 TEETH ALUM
27 TEETH
4.3-B (262) ENG - 1990-91 - V6 - 4.000 Bore (ASTRO, SAFARI)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-506SB
499
S732
S505
INCLUDES [499], [S732] & [S505]
46 LINKS
36 TEETH
18 TEETH
4.3-N (262) ENG - 1985-86 - V6 - 4.000 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-499SA
499
S390
S505
INCLUDES [499], [S390] & [S505]
46 LINKS
36 TEETH
18 TEETH
4.3-W (262) OHV ENG - 1992-02 - V6 - 4.000 Bore INCLUDES VANS
3pc Set
3-509S
3-8MMSRH72S
Chain
499
8MMSRH72
S776
S836
Cam Sprocket
1992-1998 INCLUDES [499], [S776] & [S505]
1999-2002 INCLUDES [8MMSRH72], [S835], [S836] USE BT5452
AND GM COVER #89017259 WITH THIS SET TO ELIMINATE
RATTLE.
1992-1998 46 LINKS
1999-2002 72 LINKS
1992-1998 36 TEETH
1999-2002 56 TEETH
Continued on Next Page
119
GMC/CHEVY TRUCKS (Continued)
Line
No.
35
Part Title
Crank Sprocket
S505
S835
BT5452
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-8MMSRH72S
3-8MMSRH72SA
8MMSRH72
S836
S928
S835
BT5452
BT5568
3pc Set
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-509S
3-8MMSRH72S
499
8MMSRH72
S776
S836
S505
S835
BT5452
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-506SB
3pc Set
Cam Sprocket
Crank Sprocket
S776
S505
3-163S
3-489S
163
505
S261
S288
S262
S289
INCLUDES [163], [S288] & [S289] H.D.
INCLUDES [505],[S261] & [S262]
58 LINKS H.D.
46 LINKS
36 TEETH
44 TEETH H.D.
18 TEETH
22 TEETH H.D.
267 ENG - 1979-82 - 8 Cyl. - 3 1/2 Bore
3pc Set
Chain
Continued on Next Page
120
499
S390
S732
1987-1996 INCLUDES [499], [S732] & [S505] EXC. 1993
TYPHOON; FOR ENGINES WITHOUT BALANCE SHAFTS
1992-1996 INCLUDES [499], [S776] & [S505] EXC. 1993
TYPHOON; FOR ENGINES WITH BALANCE SHAFT
46 LINKS EXC. 1993 TYPHOON
1985-1986 36 TEETH
1987-1996 36 TEETH FOR ENGINES WITHOUT BALANCE
SHAFTS
1992-1996 36 TEETH FOR ENGINES WITH BALANCE SHAFT
18 TEETH EXC. 1993 TYPHOON
265 ENG - 1955-57 - 8 Cyl. - 3 3/4 Bore (CHEVY ONLY)
Chain
40
1996-1998 INCLUDES [499], [S776] & [S505]
1999 INCLUDES [8MMSRH72], [S835], [S836]
1996-1998 46 LINKS
1999 72 LINKS
1996-1998 36 TEETH
1999 56 TEETH
1996-1998 18 TEETH
1999 28 TEETH
1999
4.3-Z (262) OHV ENG - 1985-96 - V6 - 4.00 Bore INCLUDES VANS
3-509S
39
2002-2006 INCLUDES [8MMSRH72], [S835], [S836]
2007-2011 INCLUDES [8MMSRH72], [S835], [S928]
2002-2012 72 LINKS
2002-2006 56 TEETH
2007-2011 56 TEETH
2002-2011 28 TEETH
2002-2003 TO ELIMINATE RATTLE; USE W/GM COVER
#89017259
2004-2011 TENSIONER GUIDE; TO ELIMINATE RATTLE USE
W/GM COVER #89017259
4.3-X (262) OHV ENG - 1996-99 - V6 - 4.00 Bore (S10, SONOMA) VORTEC
Chain
38
1992-1998 18 TEETH
1999-2002 28 TEETH
1999-2002 FOR USE WITH 3-8MMSRH72S TO ELIMINATE
RATTLE. USE WITH GM COVER #89017259
4.3-X (262) OHV ENG - 2002-14 - V6 - 4.00 Bore
(EXPRESS,SAVANA,JIMMY,BLAZER,S10,SIERRA,SILVERADO,SONOMA)(INCLUDES MINI VANS)
VORTEC
3pc Set
37
Description
4.3-W (262) OHV ENG - 1992-02 - V6 - 4.000 Bore INCLUDES VANS (Continued)
Chain Tensioner
36
Part No
3-163S
3-499S
163
499
INCLUDES [163], [S288] & [S289] H.D.
INCLUDES [499], [S390] & [S391]
58 LINKS H.D.
46 LINKS
GMC/CHEVY TRUCKS (Continued)
Line
No.
40
Part Title
Part No
Description
267 ENG - 1979-82 - 8 Cyl. - 3 1/2 Bore (Continued)
Cam Sprocket
Crank Sprocket
S288
S390
S289
S391
44 TEETH H.D.
36 TEETH
22 TEETH H.D.
18 TEETH
41
270 OHV ENG - 1941-62 - 6 Cyl. - 3.78 Bore (GMC ONLY)
42
283 ENG - 1957-67 - 8 Cyl. - 3.88 Bore (INCLUDES VANS)
Cam Gear
3pc Set
Chain
Cam Sprocket
Crank Sprocket
2500
2514
3-163S
3-489S
3-499S
163
499
505
S261
S288
S390
S262
S289
S391
54 TEETH FIBER
54 TEETH ALUM
INCLUDES [163], [S288] & [S289] HEAVY DUTY
1957-1966 INCLUDES [505],[S261] & [S262] STANDARD DUTY
1967 INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
1967 46 LINKS STANDARD DUTY
1957-1966 46 LINKS STANDARD DUTY
1957-1966 36 TEETH STANDARD DUTY
44 TEETH HEAVY DUTY
1967 36 TEETH STANDARD DUTY
1957-1966 18 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
1967 18 TEETH STANDARD DUTY
43
288 ENG - 1955-55 - 8 Cyl. - 3.75 Bore (GMC ONLY) V BLOCK
44
4.8-T (292) ENG - 1963-89 - 6 Cyl. - 3.88 Bore (INCLUDES VANS)
45
Chain
347
Gear Set
2528S
Cam Gear
Crank Gear
Cam Thrust Plate Spacer
2526
2527
MG221
60 LINKS
ALUM. CAM GEAR & STEEL CRANK GEAR REPLACE AS A SET
ONLY; NOTE: IN 1963-65 IT MAY REQUIRE A NEW CRANKCASE
FRONT COVER
1966-1989 54 TEETH
1966-1989 27 TEETH
4.8-A,C,V (294) OHV ENG - 1999-13 - 8 Cyl. - 3.78 Bore (GEN III, GEN IV VORTEC) GAS/FLEX
INCLUDES VANS
3pc Set
3-3SRH60S
3-3SRH60S
3-3SRH60SA
3-3SRH60SA
Chain
Cam Sprocket
3SRH60
S878
S878
2007 INCLUDES [3SRH60], [S894] & [S827]; FOR USE W/SINGLE
BOLT CAMSHAFT TAHOE,YUKON; NON-RELUCTOR STYLE
CAM SPROCKET
2008-2010 INCLUDES [3SRH60], [S894] & [S827]; FOR USE
W/SINGLE BOLT CAMSHAFT 2008-09 TAHOE,YUKON; 2008-10
EXPRESS,SAVANA; NON-RELUCTOR STYLE CAM SPROCKET
1999-2006 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3
BOLT CAMSHAFT RELUCTOR STYLE CAM SPROCKET; HALF
MOON HUB ON FACE
2007 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT
CAMSHAFT EXPRESS 2500, SAVANA 2500 & SAVANA 3500
ONLY (RELUCTOR STYLE CAM SPROCKET, HALF MOON HUB
ON FACE)
1999-2012 60 LINKS
1999-2006 44 TEETH; FOR USE W/3BOLT CAMSHAFT
RELUCTOR STYLE CAM SPROCKET, HALF MOON HUB ON
FACE
2007 44 TEETH; FOR USE W/3BOLT CAMSHAFT EXPRESS,
SAVANA 2500 & 3500 ONLY; RELUCTOR STYLE CAM
SPROCKET; HALF MOON HUB ON FACE
Continued on Next Page
121
GMC/CHEVY TRUCKS (Continued)
Line
No.
45
Part Title
Part No
Description
4.8-A,C,V (294) OHV ENG - 1999-13 - 8 Cyl. - 3.78 Bore (GEN III, GEN IV VORTEC) GAS/FLEX
INCLUDES VANS (Continued)
Cam Sprocket
S894
S894
S894
Crank Sprocket
Chain Tensioner
Chain Damper Adapter
Bracket
S827
BT5490
BT5490
BT5490
BT5490
BD417-BRKT
BD417-DBRKT
2007 44 TEETH; FOR USE W/SINGLE BOLT CAM TAHOE,YUKON
(NON RELUCTOR STYLE CAM SPROCKET)
2008-2009 44 TEETH; FOR USE W/SINGLE BOLT CAM TAHOE,
YUKON,EXPRESS,SAVANA
2010 44 TEETH; FOR USE W/SINGLE BOLT CAM EXPRESS,
SAVANA
1999-2012 22 TEETH 22 TEETH
2007 TAHOE, VIN CODE C ONLY
2007-2009 SILVERADO 1500 & SIERRA 1500, YUKON VIN CODE
C ONLY
2008 EXPRESS 2500 & EXPRESS 3500; VIN CODE C ONLY
2008-2010 SAVANA 2500 & SAVANA 3500; VIN CODE C ONLY
1999-2006 ALLOWS THE USE OF THE LS2 TIMING CHAIN
DAMPER [BD417] ON ANY GM LS ENGINE BLOCK NOT
ORIGINALLY EQUIPPED FOR CHAIN DAMPERS; DAMPER NOT
INCLUDED VIN CODE V; EXCLUDES VVT ENGINES
1999-2006 ALLOWS THE USE OF THE LS2 TIMING CHAIN
DAMPER [BD417] ON ANY GM LS ENGINE BLOCK NOT
ORIGINALLY EQUIPPED FOR CHAIN DAMPERS; INCLUDES
[BD417] DAMPER VIN CODE V; EXCLUDES VVT ENGINES
46
302 ENG - 1952-59 - 6 Cyl. - 4.00 Bore (GMC ONLY)
47
5.0 (305) OHV ENG - 1976-02 - 8 Cyl. - 3.74 Bore INCLUDES VANS
Cam Gear
3pc Set
Chain
Cam Sprocket
Crank Sprocket
48
2500
2514
3-163S
3-499S
3-506SC
163
499
S288
S390
S732
S289
S391
54 TEETH FIBER
54 TEETH ALUM
INCLUDES [163], [S288] & [S289] HEAVY DUTY
1976-1995 INCLUDES [499], [S390] & [S391] STANDARD DUTY
1996-2002 INCLUDES [499], [S732] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
1976-1995 36 TEETH STANDARD DUTY
1996-2002 36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
307 ENG - 1968-73 - 8 Cyl. - 3 7/8 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-163S
3-499S
163
499
S288
S390
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
49
317 ENG - 1955-58 - 8 Cyl. - 3 15/16 Bore
50
322 ENG - 1956-59 - 8 Cyl. - 4.000 Bore (CHEVY ONLY)
51
122
Chain
Cam Sprocket
Crank Sprocket
347
S346
S347
60 LINKS
54 TEETH
27 TEETH
324 ENG - 1955-56 - 8 Cyl. - 3 7/8 Bore (GMC ONLY)
Chain
Crank Sprocket
494
S246
48 LINKS
18 TEETH
GMC/CHEVY TRUCKS (Continued)
Line
No.
52
Part Title
Part No
Description
5.3 (323,325) OHV ENG - 1999-2013 - 8 Cyl. - 3.78 Bore (GEN III, GEN IV VORTEC) (INCLUDES
VANS) GAS,FLEX,ELECTRIC
3pc Set
3-3SRH60S
3-3SRH60S
3-3SRH60SA
3-3SRH60SA
3-3SRH60SA
Chain
Cam Sprocket
3SRH60
S878
S878
S878
S894
S894
Crank Sprocket
Chain Tensioner
S827
BT5490
BT5490
Damper
BT5490
BD417
BD417
BD417
BD417
BD417
BD417
2007-2009 INCLUDES [3SRH60], [S894] & [S827]; FOR USE
W/SINGLE BOLT CAMSHAFT VIN CODES J,M,0,3;
SILVERADO,TAHOE,TRAILBLAZER,ENVOY,SIERRA
1500,YUKON (KIT INCLUDES NON RELUCTOR STYLE CAM
SPROCKET)
2008-2010 INCLUDES [3SRH60], [S894] & [S827]; FOR USE
W/SINGLE BOLT CAMSHAFT EXPRESS 1500,SAVANA 1500 VIN
CODE 4; (THIS KIT CONTAINS THE NON-RELUCTOR STYLE
CAM SPROCKET)
1999-2004 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3
BOLT CAMSHAFT
2005-2006 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3
BOLT CAMSHAFT VIN M TRAILBLAZER,ENVOY(THIS KIT
INCLUDES RELUCTOR STYLE CAM SPROCKET, HALF MOON
HUB ON FACE)
2005-2007 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3
BOLT CAMSHAFT VIN CODES B,T,Z;
AVALANCHE,EXPRESS,SAVANA,SIERRA,SILVERADO,SUBURBAN,TAHOE,YUKON,YUKON XL (RELUCTOR STYLE CAM
SPROCKET, HALF MOON HUB ON FACE.
1999-2012 60 LINKS
1999-2004 44 TEETH; FOR USE W/3BOLT CAMSHAFT
2005-2006 44 TEETH; FOR USE W/3BOLT CAMSHAFT
TRAILBLAZER, ENVOY VIN M ONLY; RELUCTOR STYLE CAM
SPROCKET, HALF MOON HUB ON FACE
2005-2007 44 TEETH; FOR USE W/3BOLT CAMSHAFT VIN
CODES B,T,Z;
AVALANCHE,EXPRESS,SAVANA,SIERRA,SILVERADO,SUBURBAN,TAHOE,YUKON,YUKON XL (RELUCTOR STYLE CAM
SPROCKET, HALF MOON HUB ON FACE. MUST BE USED WITH
3SRH60 CHAIN)
2007-2009 44 TEETH; FOR USE W/SINGLE BOLT CAM VIN
CODES J,M,0,3; AVALANCHE,SILVERADO 1500,SIERRA
1500,ENVOY,TRAILBLAZER,SUBURBAN
1500,TAHOE,YUKON,YUKON XL 1500(NON-RELUCTOR STYLE
CAM SPROCKET)
2008-2010 44 TEETH; FOR USE W/SINGLE BOLT CAM VIN 4;
EXPRESS 1500, SAVANA 1500;(NON-RELUCTOR STYLE CAM
SPROCKET)
1999-2012 22 TEETH 22 TEETH
2007-2011 CANYON, SIERRA 1500, SIERRA, YUKON, YUKON
XL1500
2007-2012 AVALANCHE, COLORADO, ENVOY, EXPRESS 1500,
SILVERADO 1500, SILVERADO 3500, TAHOE & TRAILBLAZER
2008-2011 EXPRESS 3500, SAVANA 1500
2003-2006 EXPRESS 1500,EXPRESS 2500,EXPRESS 3500
2004-2005 SUBURBAN 1500,YUKON XL 1500
2004-2006 SILVERADO 1500,SILVERADO 2500,SILVERADO 3500,
TAHOE,YUKON
2005 SAVANA 2500
2005-2006 AVALANCHE 1500,ENVOY, SIERRA 1500
2005-2007 SAVANA 1500
Continued on Next Page
123
GMC/CHEVY TRUCKS (Continued)
Line
No.
52
Part Title
Part No
5.3 (323,325) OHV ENG - 1999-2013 - 8 Cyl. - 3.78 Bore (GEN III, GEN IV VORTEC) (INCLUDES
VANS) GAS,FLEX,ELECTRIC (Continued)
Damper
Chain Damper Adapter
Bracket
BD417
BD417-BRKT
BD417-DBRKT
53
Description
2006 TRAILBLAZER
1999-2003 ALLOWS THE USE OF THE LS2 TIMING CHAIN
DAMPER [BD417] ON ANY GM LS ENGINE BLOCK NOT
ORIGINALLY EQUIPPED FOR CHAIN DAMPERS; DAMPER NOT
INCLUDED EXCLUDES VVT ENGINES
1999-2003 ALLOWS THE USE OF THE LS2 TIMING CHAIN
DAMPER [BD417] ON ANY GM LS ENGINE BLOCK NOT
ORIGINALLY EQUIPPED FOR CHAIN DAMPERS; INCLUDES
[BD417] DAMPER EXCLUDES VVT ENGINES
327 OHV ENG - 1964-69 - 8 Cyl. - 4.00 Bore (INCLUDES EL CAMINO & VANS)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-163S
3-489S
3-499S
163
499
505
S261
S288
S390
S262
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
1964-1966 INCLUDES [505],[S261] & [S262] STANDARD DUTY
1967-1969 INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
1967-1969 46 LINKS STANDARD DUTY
1964-1966 46 LINKS STANDARD DUTY
1964-1966 36 TEETH STANDARD DUTY
44 TEETH HEAVY DUTY
1967-1969 36 TEETH STANDARD DUTY
1964-1966 18 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
1967-1969 18 TEETH STANDARD DUTY
54
347 ENG - 1957 - 8 Cyl. - 3 15/16 Bore
55
348 ENG - 1958-65 - 8 Cyl. - 4 1/8 Bore (CHEVY ONLY)
56
Chain
Chain
347
162
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-163S
3pc Set
Cam Sprocket
Crank Sprocket
124
163
499
S288
S390
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY; REPLACE AS A
SET
INCLUDES [499], [S390] & [S391] STANDARD DUTY; REPLACE
AS A SET
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
5.7-N (350) ENG - 1983-84 - 8 Cyl. - 4.000 Bore FUEL INJECTED DIESEL ENGINES
Chain
58
64 LINKS
5.7 (350) OHV ENG - 1968-79 - 8 Cyl. - 4.00 Bore (CARBURETED & FI) (GAS,LPG)
3-499S
57
60 LINKS
3-163S
3-499S
163
499
S288
S390
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
5.7-Z (350) ENG - 1978-81 - 8 Cyl. - 4.06 Bore (CHEVY 1978-81) (GMC 1978-81) (DIESEL)
Chain
Crank Sprocket
180
S503
48 LINKS
18 TEETH
GMC/CHEVY TRUCKS (Continued)
Line
No.
59
Part Title
Part No
5.7-K (350) ENG - 1987-96 - 8 Cyl. - 4.000 Bore (INCLUDES VANS & TRUCKS)
3pc Set
3-163S
3-202S
3-499SA
Chain
163
202
499
Cam Sprocket
S288
S390
S634
Crank Sprocket
S289
S505
S645
60
Description
INCLUDES [163], [S288] & [S289] HEAVY DUTY ROLLER (WILL
WORK FOR ALL TOOTH WIDTHS IF REPLACED AS A SET)
INCLUDES [202], [S634] & [S645] STANDARD DUTY ROLLER
(.275/.285) WILL WORK FOR ALL TOOTH WIDTHS IF REPLACED
AS A SET
INCLUDES [499], [S390] & [S505] STANDARD DUTY SILENT;
.40/.41 TOOTH WIDTH; WILL WORK FOR ALL TOOTH WIDTHS
IF REPLACED AS A SET
58 LINKS HEAVY DUTY ROLLER CHAIN; USE WITH S289, S288
HEAVY DUTY SPROCKETS
46 LINKS STANDARD DUTY ROLLER CHAIN; 275/.285 TOOTH
WIDTH; USE WITH S634, S645 STANDARD DUTY SPROCKETS
46 LINKS STANDARD DUTY SILENT CHAIN; .40/.41 TOOTH
WIDTH; WILL WORK WITH S390, S505 HEAVY DUTY
SPROCKETS
44 TEETH HEAVY DUTY; FOR USE WITH [163] HEAVY DUTY
ROLLER CHAIN
36 TEETH HEAVY DUTY (.40/.41 TOOTH WIDTH) (FOR USE
WITH [506] HEAVY DUTY SILENT CHAIN OR [499] STANDARD
DUTY SILENT CHAIN)
36 TEETH STANDARD DUTY (.275/.285 TOOTH WIDTH) (FOR
USE WITH [202] STANDARD DUTY ROLLER CHAIN)
22 TEETH HEAVY DUTY (USE WITH [163] HEAVY DUTY
ROLLER CHAIN)
18 TEETH HEAVY DUTY (.40/.41 TOOTH WIDTH) (FOR USE
WITH [506] HEAVY DUTY SILENT CHAIN OR [499] STANDARD
DUTY SILENT CHAIN)
18 TEETH STANDARD DUTY (.275/.285 TOOTH WIDTH) (USE
WITH [202] STANDARD DUTY ROLLER CHAIN
5.7-L,M & P (350) ENG - 1980-88 - 8 Cyl. - 4.00 Bore (CARBURETED) (GAS ENG)
3pc Set
3-163S
3-202S
3-499S
3-499S
3-499SA
Chain
163
202
499
499
499
INCLUDES [163], [S288] & [S289] W/HEAVY DUTY ROLLER
CHAIN; REPLACE AS A COMPLETE SET
1985-1988 INCLUDES [202], [S634] & [S645] VIN CODE M & P;
W/.275/.285 WIDTH STANDARD DUTY ROLLER CHAIN;
REPLACE AS SET
1980-1984 INCLUDES [499], [S390] & [S391] VIN CODE M & P;
W/.40/.41 STANDARD DUTY SILENT CHAIN; REPLACE AS
COMPLETE SET
1980-1986 INCLUDES [499], [S390] & [S391] VIN CODE L;
W/.40/.41 STANDARD DUTY SILENT CHAIN; REPLACE AS
COMPLETE SET
1985-1988 INCLUDES [499], [S390] & [S505] VIN CODE M & P;
W/.40/.41 STANDARD DUTY SILENT CHAIN; REPLACE AS
COMPLETE SET
58 LINKS HEAVY DUTY ROLLER CHAIN
1985-1988 46 LINKS VIN CODE M & P; .275/.285 TOOTH WIDTH,
STANDARD DUTY ROLLER CHAIN
1980-1984 46 LINKS VIN CODE M & P; .40/.41 TOOTH WIDTH W/
BACK BEND; STANDARD SILENT CHAIN
1980-1986 46 LINKS VIN CODE L; .40/.41 TOOTH WIDTH W/
BACK BEND; STANDARD SILENT CHAIN
1985-1988 46 LINKS VIN CODE M & P; .40/.41 TOOTH WIDTH;
STANDARD DUTY SILENT CHAIN
Continued on Next Page
125
GMC/CHEVY TRUCKS (Continued)
Line
No.
60
Part Title
Part No
5.7-L,M & P (350) ENG - 1980-88 - 8 Cyl. - 4.00 Bore (CARBURETED) (GAS ENG) (Continued)
Cam Sprocket
S288
S390
S634
Crank Sprocket
S289
S391
S391
S505
S645
61
3pc Set
Chain
3-202SA
202
499
Cam Sprocket
S732
S784
Crank Sprocket
S645
S797
INCLUDES [202], [S784], [S645] .275/.285 TOOTH WIDTH;
STANDARD DUTY ROLLER CHAIN
INCLUDES [499], [S732], [S797] .40/.41 TOOTH WIDTH;
STANDARD DUTY SILENT CHAIN
46 LINKS 275/.285 TOOTH WIDTH, STANDARD DUTY ROLLER
CHAIN
46 LINKS .40/.41 TOOTH WIDTH; STANDARD DUTY SILENT
CHAIN
36 TEETH HEAVY DUTY; .40/.41 TOOTH WIDTH; USE WITH
[506] HEAVY DUTY SILENT CHAIN
36 TEETH STANDARD DUTY; .275/.285 TOOTH WIDTH; USE
WITH [202] STANDARD DUTY ROLLER CHAIN
18 TEETH STANDARD DUTY; .275/.285 TOOTH WIDTH; USE
WITH [202] STANDARD DUTY ROLLER CHAIN
18 TEETH HEAVY DUTY; .40/.41 TOOTH WIDTH; USE WITH
[506] HEAVY DUTY SILENT CHAIN
6.0 (364) OHV ENG - 1999-13 - 8 Cyl. - 4.00 Bore (GEN III,GEN IV VORTEC) (INCLUDES VANS)
GAS,FLEX,ELECTRIC,CNG ENG.
3pc Set
3-3SRH60S
3-3SRH60SA
3-3SRH60SA
Chain
Cam Sprocket
3SRH60
S878
S878
S894
Continued on Next Page
126
44 TEETH HEAVY DUTY; USE W/ 163 CHAIN
1980-1988 36 TEETH VIN CODES L,M & P; STANDARD DUTY,
.40/.41 TOOTH WIDTH, USE W/ 499 & 506 CHAINS
1985-1988 36 TEETH VIN CODE M & P; STANDARD DUTY;
.275/.285 TOOTH WIDTH; USE W/ 202 CHAIN
22 TEETH HEAVY DUTY, USE W/ 163 CHAIN
18 TEETH VIN L; STANDARD DUTY; USE W/ 499 CHAIN
1980-1984 18 TEETH VIN CODE M & P; STANDARD DUTY;
.40/.41 TOOTH WIDTH USE W/ 499 CHAIN
1985-1988 18 TEETH VIN CODE M & P; HEAVY DUTY; .40/.41
TOOTH WIDTH; USE W/ 506 CHAIN
1985-1988 18 TEETH VIN CODE M & P; STANDARD DUTY;
.275/.285 TOOTH WIDTH; USE WITH 202 CHAIN
5.7-R (350) OHV ENG - 1996-02 - 8 Cyl. - 4.000 Bore (VORTEC) INCLUDES VANS
3-506SE
62
Description
2007-2010 INCLUDES [3SRH60], [S894] & [S827]; FOR USE
W/SINGLE BOLT CAMSHAFT 2007-09 TRAILBLAZER; 2008-10
EXPRESS 2500-3500, SAVANA 2500-3500 (NON ACTUATOR
APPLICATIONS)
1999-2006 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3
BOLT CAMSHAFT RELUCTOR STYLE CAM SPROCKET, HALF
MOON HUB ON FACE
2007 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT
CAMSHAFT EXPRESS 2500,3500 & SAVANA 2500,3500 ONLY
(RELUCTOR STYLE CAM SPROCKET, HALF MOON HUB ON
FACE)
1999-2012 60 LINKS
1999-2006 44 TEETH; FOR USE W/3BOLT CAMSHAFT
RELUCTOR STYLE CAM SPROCKET, HALF MOON HUB ON
FACE
2007 44 TEETH; FOR USE W/3BOLT CAMSHAFT EXPRESS 25003500 & SAVANA 2500-3500 ONLY; RELUCTOR STYLE CAM
SPROCKET, HALF MOON HUB ON FACE
2007-2010 44 TEETH; FOR USE W/SINGLE BOLT CAM 2007-09
TRAILBLAZER; 2008-10 EXPRESS 2500-3500, SAVANA 25003500 (NON ACTUATOR APPLICATIONS)
GMC/CHEVY TRUCKS (Continued)
Line
No.
62
Part Title
Part No
Description
6.0 (364) OHV ENG - 1999-13 - 8 Cyl. - 4.00 Bore (GEN III,GEN IV VORTEC) (INCLUDES VANS)
GAS,FLEX,ELECTRIC,CNG ENG. (Continued)
Crank Sprocket
S827
Chain Tensioner
Damper
Chain Damper Adapter
Bracket
BT5490
BD417
BD417-BRKT
BD417-DBRKT
1999-2012 22 TEETH 22 TEETH EXC. 2012 EXPRESS 25004500,SAVANA 2500-4500
2007-2009 TRAILBLAZER; W/SINGLE BOLT CAM; 4 SENSORS
2005-2006 SSR
1999-2006 ALLOWS THE USE OF THE LS2 TIMING CHAIN
DAMPER [BD417] ON ANY GM LS ENGINE BLOCK NOT
ORIGINALLY EQUIPPED FOR CHAIN DAMPERS; DAMPER NOT
INCLUDED EXCLUDES VVT ENGINES
1999-2006 ALLOWS THE USE OF THE LS2 TIMING CHAIN
DAMPER [BD417] ON ANY GM LS ENGINE BLOCK NOT
ORIGINALLY EQUIPPED FOR CHAIN DAMPERS; INCLUDES
[BD417] DAMPER EXCLUDES VVT ENGINES
63
6.0 (366) ENG - 1968-79 - 8 Cyl. - 3.94 Bore C SERIES,K SERIES,P SERIES,SUBURBAN
64
6.0 (366) ENG - 1980-98 - 8 Cyl. - 3 15/16 Bore (MEDIUM DUTY)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-171S
168
S394
S395
3-171S
3-4SR50
168
4SR50
S394
S710
S395
S717
1969-1979 INCLUDES [168], [S394] & [S395]
1969-1979 66 LINKS
1969-1979 50 TEETH
1969-1979 25 TEETH
1980-1990 INCLUDES [168], [S394] & [S395]
1991-1998 INCLUDES [4SR50], [S710] & [S717]
1980-1990 66 LINKS
1991-1998 50 LINKS
1980-1990 50 TEETH
1991-1998 38 TEETH
1980-1990 25 TEETH
1991-1998 19 TEETH
65
370 ENG - 1957-59 - 8 Cyl. - 4.000 Bore (GMC ONLY)
66
6.2 (379) DIESEL ENG - 1982-93 - 8 Cyl. - 3.976 Bore (6.2-C 1982-93) (6.2-J 1982-93)
67
68
Chain
3pc Set
Chain
Cam Sprocket
Crank Sprocket
162
3-181S
181
S524
S375
64 LINKS
INCLUDES [181], [S524] & [S375]
48 LINKS
36 TEETH
18 TEETH
6.2-8 (378) OHV ENG - 2007-08 - V8 - 4.06 Bore (GEN IV VORTEC L92) (YUKON DENALI, SIERRA
1500, YUKON XL1500 DENALI, SIERA 1500, TAHOE) GAS ENG
3pc Set
3-3SRH60S
Chain
Cam Sprocket
3SRH60
S894
Crank Sprocket
Chain Tensioner
S827
BT5490
2007-2008 INCLUDES [3SRH60], [S894] & [S827]; FOR USE
W/SINGLE BOLT CAMSHAFT EXCLUDES YUKON, YUKON XL
1500 (CAM SPROCKET IS PART OF ACTUATOR)
60 LINKS
2007-2008 44 TEETH; FOR USE W/SINGLE BOLT CAM
EXCLUDES YUKON, YUKON XL 1500, TAHOE (CAM SPROCKET
IS PART OF ACTUATOR)
22 TEETH 22 TEETH
6.2-2,F (376) OHV ENG - 2009-13 - V8 - 4.06 Bore (SILVERADO 1500,SIERRA 1500,SIERRA
DENALI,TAHOE,YUKON,YUKON XL 1500) 16V FLEX FUEL
3pc Set
3-3SRH60S
Chain
Cam Sprocket
3SRH60
S894
2009-2012 INCLUDES [3SRH60], [S894] & [S827]; FOR USE
W/SINGLE BOLT CAMSHAFT
2009-2012 60 LINKS
2009-2012 44 TEETH; FOR USE W/SINGLE BOLT CAM
Continued on Next Page
127
GMC/CHEVY TRUCKS (Continued)
Line
No.
68
69
Part Title
Description
6.2-2,F (376) OHV ENG - 2009-13 - V8 - 4.06 Bore (SILVERADO 1500,SIERRA 1500,SIERRA
DENALI,TAHOE,YUKON,YUKON XL 1500) 16V FLEX FUEL (Continued)
Crank Sprocket
S827
2009-2012 22 TEETH 22 TEETH
6.5 (395) DIESEL OHV ENG - 1992-02 - 8 Cyl. - 4.06 Bore (VIN F 1992-02 W/TURBO) (VIN P 1994-95
W/O TURBO) (VIN S 1994-98 W/TURBO) (VIN Y 1994-99 W/O TURBO) (INCLUDES VANS)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
70
Part No
3-181S
3-181SA
181
S524
S375
S807
1992-1993 INCLUDES [181], [S524] & [S375]
1994-2002 INCLUDES [181], [S807], [S524]
48 LINKS
36 TEETH
1992-1993 18 TEETH
1994-2002 18 TEETH
396 (400) ENG - 1968-70 - 8 Cyl. - 4 1/8 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-171S
3-501S
168
501
S392
S394
S393
S395
INCLUDES [168], [S394] & [S395] HEAVY DUTY
INCLUDES [501], [S392] & [S393] STANDARD DUTY
66 LINKS HEAVY DUTY
50 LINKS STANDARD DUTY
38 TEETH STANDARD DUTY
50 TEETH HEAVY DUTY
19 TEETH STANDARD DUTY
25 TEETH HEAVY DUTY
71
400 ENG - 1974-80 - 8 Cyl. - 4 1/8 Bore
72
401 ENG - 1960-65 - V6 - 4 7/8 Bore (GMC ONLY)
73
74
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Crank Gear
Idler Gear
3-163S
163
S288
S289
2843
2842
INCLUDES [163], [S288] & [S289]
58 LINKS
44 TEETH
22 TEETH
30 TEETH
57 TEETH
401 ENG - 1966-72 - V6 - 4 7/8 Bore (CHEVY 1966-71) (GMC 1966-72)
Crank Gear
Idler Gear
2843
2842
30 TEETH
57 TEETH
402 (400) ENG - 1971-72 - 8 Cyl. - 4 1/8 Bore BIG BLOCK
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-171S
3-501S
168
501
S392
S394
S393
S395
INCLUDES [168], [S394] & [S395] HEAVY DUTY
INCLUDES [501], [S392] & [S393] STANDARD DUTY
66 LINKS HEAVY DUTY
50 LINKS STANDARD DUTY
38 TEETH STANDARD DUTY
50 TEETH HEAVY DUTY
19 TEETH STANDARD DUTY
25 TEETH HEAVY DUTY
75
409 ENG - 1962-65 - 8 Cyl. - 4 5/16 Bore (CHEVY ONLY)
76
7.0 (427) ENG - 1980-98 - 8 Cyl. - 4 1/4 Bore (B SERIES,C SERIES,P SERIES - TOPKICK,KODIAK)(
MEDIUM DUTY)
Chain
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Continued on Next Page
128
162
S319
3-171S
3-4SR50
168
4SR50
S394
S710
S395
64 LINKS
24 TEETH
1980-1990 INCLUDES [168], [S394] & [S395]
1991-1998 INCLUDES [4SR50], [S710] & [S717]
1980-1990 66 LINKS
1991-1998 50 LINKS
1980-1990 50 TEETH
1991-1998 38 TEETH
1980-1990 25 TEETH
GMC/CHEVY TRUCKS (Continued)
Line
No.
76
77
78
Part Title
Part No
Description
7.0 (427) ENG - 1980-98 - 8 Cyl. - 4 1/4 Bore (B SERIES,C SERIES,P SERIES - TOPKICK,KODIAK)(
MEDIUM DUTY) (Continued)
Crank Sprocket
S717
1991-1998 19 TEETH
432 & 432M ENG - 1973-74 - V6 - 4 7/8 Bore (432 CHEVY ONLY) (432M CHEVY & GMC)
Crank Gear
Idler Gear
2843
2842
30 TEETH
57 TEETH
7.4 (454) OHV ENG - 1970-00 - 8 Cyl. - 4.25 Bore (CHEVY 1970-00) (GMC 1971-00) (INCLUDES
VANS)
3pc Set
3-171S
3-4SR50SA
3-4SR50SE
Chain
Cam Sprocket
3-501S
3-507S
168
4SR50
501
507
S392
S394
S806
S830
Crank Sprocket
S393
S395
S815
S831
1971-1997 INCLUDES [168], [S394] & [S395] HEAVY DUTY
1996-1999 INCLUDES [4SR50], [S831], [S806] STANDARD DUTY;
VIN CODE J; 1999 W/PULL AHEAD DESIGN
1999-2000 INCLUDES [4SR50], [S830], [S815] STANDARD DUTY;
CODE J; W/OUT 1999 PULL AHEAD DESIGN
1971-1987 INCLUDES [501], [S392] & [S393] STANDARD DUTY
1988-1995 INCLUDES [507], [S392] & [S393] STANDARD DUTY
1971-1997 66 LINKS HEAVY DUTY
1996-2000 50 LINKS STANDARD DUTY ; VIN CODES B,J
1971-1987 50 LINKS STANDARD DUTY
1988-1996 50 LINKS STANDARD DUTY ; EXCLUDING 1996 VIN J
1971-1995 38 TEETH STANDARD DUTY
50 TEETH HEAVY DUTY
1996-1999 38 TEETH .453" TOOTH WIDTH VIN CODE J (1999
W/PULL AHEAD DESIGN)
1998-2000 38 TEETH .464" TOOTH WIDTH VIN CODES B,J (VIN
J 1999 W/O ZK3 PULL AHEAD DESIGN)
1971-1995 19 TEETH STANDARD DUTY
25 TEETH HEAVY DUTY
1999-2000 19 TEETH .464" THICKNESS VIN CODE J (W/OUT
1999 PULL AHEAD DESIGN)
1996-1999 19 TEETH .453" THICKNESS VIN CODE J (1999
W/PULL AHEAD DESIGN)
79
478,478M ENG - 1962-74 - V6 - 5 1/8 Bore (478 1962-65) (478M 1966-74)
80
D478,DH478 DIESEL ENG - 1965-74 - V6 - 5 1/8 Bore
81
Crank Gear
Idler Gear
Crank Gear
2847
30 TEETH
57 TEETH
34 TEETH
8.1-G (496) OHV ENG - 2001-07 - V8 - 4.25 Bore (VORTEC) INCLUDES VANS
3pc Set
Chain
Cam Sprocket
82
2843
2842
Crank Sprocket
3-4SR50SB
3-4SR50SC
3-4SR50SD
4SR50
S834
S842
S892
S837
2001 INCLUDES [4SR50], [S834] & [S837]
2002-2003 INCLUDES [4SR50], [S842] & [S837]
2004-2007 INCLUDES [4SR50], [S892] & [S837]
50 LINKS
2001 38 TEETH
2002-2003 38 TEETH
2004-2007 38 TEETH
19 TEETH
8.1-E,G (496) OHV ENG - 2001-09 - 8 Cyl. - 4.25 Bore (C-SERIES KODIAK,TOPKICK, B7) (VORTEC)
MEDIUM DUTY
3pc Set
Chain
Cam Sprocket
3-4SR50SB
3-4SR50SC
4SR50
S834
S842
2001 INCLUDES [4SR50], [S834] & [S837] C3500HD
2002 INCLUDES [4SR50], [S842] & [S837] C3500HD
2001-2002 50 LINKS C3500HD
2001 38 TEETH C3500HD
2002 38 TEETH C3500HD
Continued on Next Page
129
GMC/CHEVY TRUCKS (Continued)
Line
No.
82
83
84
Part Title
Part No
Description
8.1-E,G (496) OHV ENG - 2001-09 - 8 Cyl. - 4.25 Bore (C-SERIES KODIAK,TOPKICK, B7) (VORTEC)
MEDIUM DUTY (Continued)
S837
Crank Sprocket
2001-2002 19 TEETH C3500HD
637 ENG - 1970-72 - 8 Cyl. - 5 1/8 Bore (SERIES 90)
2847
2845
Crank Gear
Idler Gear
34 TEETH
51 TEETH
702 ENG - 1960-65 - 12 Cyl - 4 9/16 Bore (GMC ONLY)
2843
2842
Crank Gear
Idler Gear
30 TEETH
57 TEETH
HENRY-J
4 Cyl.
Engine
ALL 4 CYL
Line
No.
1
Year
Line
1951-54
1
Part Title
Engine
Year
Line
Part No
Engine
Year
Line
Year
Line
Description
ALL 4 CYL ENG - 1951-54 - 4 Cyl. - 3 1/8 Bore
2900
2901
Cam Gear
Crank Gear
56 TEETH FIBER
28 TEETH
HERCULES
4 Cyl.
Engine
Year
JX4 SERIES
Engine
6 Cyl. (Continued)
1
6 Cyl.
JXA,B,C,D,G
Line
No.
Line
JXE3
4 Cyl.
2
Part Title
OOA,OOB,OOC
Part No
JX4 SERIES ENG - 4 Cyl. (EXC. HYD. PUMP)
2
JXA,B,C,D,G ENG - 6 Cyl. - 3 3/8 Bore
3
4
130
Crank Gear
3033
25 TEETH
3033
25 TEETH
3033
25 TEETH
JXE3 ENG - 6 Cyl.
Crank Gear
OOA,OOB,OOC ENG - 4 Cyl. - 3 1/2 Bore
Crank Gear
3033
Line
3
6 Cyl.
Engine
QXA,B,C,D,QXLD 3 & 5
4
Description
1
Crank Gear
Year
25 TEETH
5
HONDA
4 Cyl.
Engine
Year
Line
Engine
4 Cyl. (Continued)
Year
Line
Engine
4 Cyl. (Continued)
Year
Line
1.3 (1335CC)
1980-83
1
1.7 (1668,1700CC)
2001-05
14
2.3 (2234CC)
1998
27
1.3 (1342CC) SOHC
1984-87
2
1.8 (1751CC)
1979-83
15
2.3 (2254CC)
1998-02
28
1.5 (1487CC) SOHC
1975-79
3
1.8 (1829CC)
1983-86
16
2.3 (2259CC)
1992-96
29
1.5 (1487CC) SOHC
1981-84
4
1.8 (1829CC)
1984-85
17
2.4 (2354CC)
2002-14
30
1.5 (1478CC) SOHC
1985-86
5
1.8 (1829CC)
1987
18
2.6 (2556CC)
1994-96
31
1.5 (1487CC) SOHC
1987
6
2.0 (1955CC)SOHC
1986-89
19
1.5 (1493CC) SOHC
1988-95
7
2.0 (1958CC)
1988-90
20
6 Cyl.
2.7 (2675CC)
1995-97
32
1.5 (1493CC) SOHC
1990-95
8
2.0 (1958CC)
1988-91
21
3.0 (2977,2997CC)
1998-07
33
34
1.6 (1590CC)SOHC
1988-95
9
2.0 (1972CC)
1997-01
22
3.2-V (3165CC)
1994-97
1.6 (1590CC)
1994-95
10
2.1 (2056CC)
1990-91
23
3.2-W (3165CC)
1998-02
35
1.6 (1590CC)
1996-00
11
2.2 (2156CC) SOHC
1990-97
24
3.5 (3471CC) ENG
2005-13
36
1.6 (1595CC)
1994-00
12
2.2 (2156CC)
1994-97
25
3.5 (3474CC)
1999-04
37
1.6 (1599CC)
1976-78
13
2.2 (2156CC)
1993-01
26
Line
No.
Part Title
Part No
Description
1
1.3 (1335CC) ENG - 1980-83 - 4 Cyl. - 2.84 Bore (EJ1-CIVIC) (SOHC)
2
1.3 (1342CC) SOHC ENG - 1984-87 - 4 Cyl. - 74.0 MM Bore (CIVIC BASE,CIVIC CRX,CIVIC DX)
(SOHC)
Belt
Crank Sprocket
Belt Tensioner
Belt
3
Belt Tensioner
Crank Sprocket
Belt Tensioner
Crank Sprocket
Belt Tensioner
6
7
1986-1987 101 TEETH
1984-1985 101 TEETH
B-041-1B
B-036
B-041
S523
BT21
1976-1979 KIT INCLUDES [B-041], [S590], [S523], [BT21]
1975 94 TEETH
1976-1979 95 TEETH
20 TEETH
1.5 (1487CC) SOHC ENG - 1981-84 - 4 Cyl. - 74.0 MM Bore (EM1,EW1) (CIVIC,WAGOVAN) 8V
(SOHC)
Timing Kit
Belt
5
B-0161
B-099
BT116
92 TEETH
20 TEETH
1.5 (1487CC) SOHC ENG - 1975-79 - 4 Cyl. - 74.0 MM Bore (ED1 CIVIC CVCC 1975) (ED2,ED4
CIVIC CVCC 1975-76) (ED3 CIVIC CVCC 1976-79) 12V (SOHC)
Timing Kit
Belt
4
B-073
S523
BT21
B-041-1B
B-041
B-099
S523
BT116
BT21
1981-1983 KIT INCLUDES [B-041], [S590], [S523], [BT21]
1981-1983 95 TEETH
1984 101 TEETH
1981-1983 20 TEETH
1984
1981-1983
1.5 (1487CC) SOHC ENG - 1985-86 - 4 Cyl. - 74.0 MM Bore (CIVIC CRX SI, CIVIC SI) 8V MFI
Belt
Belt Tensioner
B-0161
B-099
BT116
1986 101 TEETH
1985 101 TEETH
1.5 (1487CC) SOHC ENG - 1987 - 4 Cyl. - 74.0 MM Bore (CIVIC CRX, CRX HF, WAGOVAN D15A2)
12V
Belt
Belt Tensioner
B-0161
BT116
101 TEETH
1.5 (1493CC) SOHC ENG - 1988-95 - 4 Cyl. - 75.0 MM Bore (D15B2 CIVIC 1988-91, CRX 1988-91)
(D15B7 CIVIC 1992-95) (D15Z1 CIVIC VX VTEC 1992-95) 16V ENG.
Belt
Belt Tensioner
B-0143
B-0223
BT162
106 TEETH EXC. D15Z1 ENG.
1992-1995 103 TEETH D15Z1 ENG. ONLY
EXC. D15Z1 ENG.
131
HONDA (Continued)
Line
No.
8
9
Part Title
11
12
13
14
15
16
Description
1.5 (1493CC) SOHC ENG - 1990-95 - 4 Cyl. - 75.0 MM Bore (D15B6 CRX HF 1990-91) (D15B7 CIVIC
DEL SOL S 1993-95) (D15B8 CIVIC CX 1992-95) 8V ENG.
Belt
Belt Tensioner
B-0143
BT162
106 TEETH
1.6 (1590CC) ENG - 1988-95 - 4 Cyl. - 75.0 MM Bore (D16A6 CIVIC 1988-91)(D16A6 CRX 1988-91)(
D16Z6 CIVIC 1992-95)(D16Z6 CIVIC DEL SOL SI VTEC 1993-95 SOHC
Belt
10
Part No
Belt Tensioner
B-0145
B-0224
BT162
1988-1991 107 TEETH
1992-1995 104 TEETH
1988-1991
1.6 (1590CC) ENG - 1994-95 - 4 Cyl. - 75.0 MM Bore (B16A3 CIVIC DEL SOL VTEC) (DOHC)
Belt
Belt Tensioner
B-0227
BT5262
124 TEETH
1.6 (1590CC) ENG - 1996-00 - 4 Cyl. - 2.95 Bore (1996-00 D16Y7 CIVIC & DEL SOL) (1996-00 D16Y8
CIVIC & DEL SOL VTEC) (1996-00 D16Y5 CIVIC VTEC) (SOHC)
Belt
B-0224
104 TEETH
1.6 (1595CC) ENG - 1994-00 - 4 Cyl. - 2.95 Bore (B16A2 CIVIC, CIVIC DEL SOL VTEC) (DOHC)
Belt
Belt Tensioner
B-0227
BT5262
124 TEETH
INTERFERENCE ENGINE APPLICATION
1.6 (1599CC) ENG - 1976-78 - 4 Cyl. - 2.910 Bore (EF1-ACCORD) (SOHC)
Belt
Crank Sprocket
Belt Tensioner
B-041
S523
BT21
95 TEETH
20 TEETH
1.7 (1668,1700CC) ENG - 2001-05 - 4 Cyl. - 2.95 Bore (D17A1 CIVIC DX,LX) (D17A2 CIVIC EX VTEC)
(D17A6 CIVIC HX VTEC-E) (D17A7 CIVIC GX) (SOHC)
Belt
Belt Tensioner
B-0312
BT5451
104 TEETH
INCLUDES SPRING
1.8 (1751CC) ENG - 1979-83 - 4 Cyl. - 3.031 Bore (EK1-ACCORD 1979-83) (PRELUDE 1979-82)
(SOHC)
Belt
Crank Sprocket
Belt Tensioner
B-041
S523
BT93
95 TEETH
20 TEETH
1.8 (1829CC) ENG - 1983-86 - 4 Cyl. - 80.7 MM Bore ET2 PRELUDE (SOHC) W/8V ENG.
Belt
Belt Tensioner
B-0160
B-094
BT113
BT115
1986 108 TEETH
1983-1985 108 TEETH
1984-1986
1983
17
1.8 (1829CC) ENG - 1984-86 - 4 Cyl. - 80.0 MM Bore ES2 ACCORD (SOHC) W/12V ENG.
18
1.8 (1829CC) ENG - 1987 - 4 Cyl. - 80.7 MM Bore A18A1 PRELUDE (SOHC) W/12V ENG.
19
20
132
Belt
Belt Tensioner
Belt
Belt Tensioner
B-094
BT113
B-0160
BT113
108 TEETH
108 TEETH
2.0 (1955CC) ENG SOHC - 1986-89 - 4 Cyl. - 86.5 MM Bore (BT 1986 ACCORD LXI) (BS 1986
ACCORD DX,LX,LXi)(A20A1 1987-89 ACCORD DX, LX)(A20A3 1987-89 ACCORD LXi, SEI)(1986-87
PRELUDE 2.0 SI) (SOHC)
Belt
Belt Tensioner
B-0160
BT113
108 TEETH
2.0 (1958CC) ENG - 1988-90 - 4 Cyl. - 3.25 Bore (B20A3 PRELUDE S) (SOHC)
Belt
Belt Tensioner
B-0144
BT202
107 TEETH
HONDA (Continued)
Line
No.
Part Title
Part No
Description
21
2.0 (1958CC) ENG - 1988-91 - 4 Cyl. - 3.19 Bore (B20A5 PRELUDE SI) (DOHC)
22
2.0 (1972CC) ENG - 1997-01 - 4 Cyl. - 3.31 Bore (1997-98 B20B4, 1999-01 B20Z2 CR-V TRUCK)
(DOHC)
23
24
25
Belt
Belt Tensioner
Belt
Belt Tensioner
B-0142
BT202
B-0184
BT5262
Belt
Belt Tensioner
B-0142
BT202
Belt
B-0186
Belt Tensioner
B-0187
BT203
Belt
Belt Tensioner
B-0186
BT203
70 TEETH (BALANCE SHAFT) INTERFERENCE ENG.
APPLICATION
112 TEETH (CAMSHAFT) INTERFERENCE ENGINE
APPLICATION
CAMSHAFT
2.2 (2156CC) ENG - 1993-01 - 4 Cyl. - 85.0,87.0 MM Bore Bore (H22A1 PRELUDE VTEC 1993-96)
(H22A4 PRELUDE BASE, TYPE SH 1997-01) (DOHC) VTEC
Belt Tensioner
Idler
B-0186
B-0226
BT5450
BT5448
70 TEETH BALANCE SHAFT BELT
155 TEETH CAMSHAFT BELT
BAL. SHAFT BELT; TENSIONER
CAMSHAFT BELT; RIGHT HAND IDLER
2.3 (2234CC) ENG - 1998 - 4 Cyl. - 86.0 MM Bore (F23A7 ODYSSEY) (SOHC)
Belt
Belt Tensioner
B-0186
BT203
70 TEETH BALANCE SHAFT BELT; INTERFERENCE ENG.
APPLICATION
112 TEETH CAMSHAFT BELT; INTERFERENCE ENG.
APPLICATION
CAMSHAFT BELT TENSIONER
2.3 (2254CC) ENG - 1998-02 - 4 Cyl. - 86.0 MM Bore (F23A1,F23A4,F23A5 ACCORD 2DR,4DR
VTEC) (SOHC)
Belt
B-0186
B-0244
29
70 TEETH BALANCE SHAFT BELT; INTERFERENCE ENG.
APPLICATION
113 TEETH CAMSHAFT BELT
CAMSHAFT BELT
2.2 (2156CC) ENG - 1994-97 - 4 Cyl. - 85.0 MM Bore ACCORD EX,EX-R (SOHC) (F22B1 VTEC)
B-0244
28
124 TEETH
2.2 (2156CC) ENG - 1990-97 - 4 Cyl. - 85.0 MM Bore (F22A1 1990-96 ACCORD, 1992-96 PRELUDE)
(F22A4 1990-91 ACCORD) (F22A6 1991-93 ACCORD) (F22B2 1994-97 ACCORD) (F22B6 1995-97
ODYSSEY) NON VTEC (SOHC)
Belt
27
125 TEETH
INTERFERENCE ENGINE APPLICATION
2.1 (2056CC) ENG - 1990-91 - 4 Cyl. - 83.0 MM Bore (B21A1 PRELUDE) (DOHC)
B-0244
26
124 TEETH
Belt Tensioner
BT203
70 TEETH BALANCE SHAFT BELT; INTERFERENCE ENG.
APPLICATION
112 TEETH CAMSHAFT BELT; INTERFERENCE ENG.
APPLICATION
CAMSHAFT BELT TENSIONER
2.3 (2259CC) ENG - 1992-96 - 4 Cyl. - 3.43 Bore (H23A1 PRELUDE SI, SE,SI 4WS) (DOHC)
Belt
B-0186
Belt Tensioner
B-0216
BT203
70 TEETH (BALANCE SHAFT) INTERFERENCE ENG.
APPLICATION
127 TEETH (CAMSHAFT) INTERFERENCE ENG. APPLICATION
CAMSHAFT
133
HONDA (Continued)
Line
No.
30
Part Title
Part No
Description
2.4 (2354CC) ENG - 2002-14 - 4 Cyl. - 87.0 Bore (ACCORD, CIVIC, CR-V, CROSSTOUR, ELEMENT)
(DOHC) 16V GAS VTEC, i-VTEC
Timing Kit
3-711S
Chain
711F
712F
Cam Sprocket
S940
Crank Sprocket
S937
Balance Shaft Sprocket
S939
Chain Tensioner
BT5569
BT5573
BT5574
Chain Guide
BG5570
BG5571
BG5572
2002-2011 KIT INCLUDES [711F], [712F], [S937], [S939], [S940],
[BG5570], [BG5571], [BG5572], [BT5569], [BT5573], [BT5574]
(DOES NOT CONTAIN INTAKE CAM SPROCKET) 2003-07
ACCORD, 2002-09 CR-V, 2003-11 ELEMENT
2002-2011 176 LINKS 2003-07 ACCORD, 2002-09 CR-V, 2003-11
ELEMENT; TIMING CHAIN
2002-2011 62 LINKS 2003-07 ACCORD, 2002-09 CR-V, 2003-11
ELEMENT; OIL PUMP & BALANCE SHAFT CHAIN
2002-2012 46 TEETH 2003-12 ACCORD, 2002-11 CR-V, 2003-11
ELEMENT; EXHAUST ONLY
2002-2012 23 / 34 TEETH 2003-12 ACCORD, 2002-12 CR-V, 200311 ELEMENT
2002-2012 17 TEETH 2003-12 ACCORD, 2002-12 CR-V, 2003-11
ELEMENT
2002-2011 2003-07 ACCORD, 2002-09 CR-V, 2003-11 ELEMENT;
BALANCE SHAFT CHAIN TENSIONER; LOWER
2002-2011 2003-07 ACCORD, 2002-09 CR-V, 2003-11 ELEMENT;
TIMING CHAIN TENSIONER ARM
2002-2011 2003-07 ACCORD, 2002-09 CR-V, 2003-11 ELEMENT;
TIMING CHAIN TENSIONER; RIGHT HAND
2002-2012 2003-12 ACCORD, 2002-12 CR-V, 2003-11 ELEMENT;
BALANCE SHAFT CHAIN GUIDE; LOWER LEFT HAND
2002-2012 2003-12 ACCORD, 2002-12 CR-V, 2003-11 ELEMENT;
TIMING CHAIN GUIDE; UPPER
2002-2012 2003-12 ACCORD, 2002-12 CR-V, 2003-11 ELEMENT;
TIMING CHAIN GUIDE; UPPER LEFT HAND
31
2.6 (2556CC) ENG - 1994-96 - 4 Cyl. - 3.65 Bore (PASSPORT) (SOHC 4ZE1 ISUZU ENG)
32
2.7 (2675CC) ENG - 1995-97 - V6 - 87.0 MM Bore (C27A4 ACCORD) (SOHC)
33
Belt
Belt
B-0147
B-0263
137 TEETH
192 TEETH
3.0 (2977,2997CC) ENG - 1998-07 - V6 - 3.38 Bore (J30A1 ACCORD 1998-02) (J30A4 ACCORD
2003-05) (J30A5 ACCORD 2006-07) (SOHC) VTEC
Belt
B-0286
B-0329
1998-2002 197 TEETH J30A1 ENG
2003-2006 197 TEETH J30A4, J30A5 ENG, INTERFERENCE
ENGINE APPLICATION
34
3.2-V (3165CC) ENG - 1994-97 - V6 - 91.4 MM Bore (PASSPORT) (SOHC 6VD1 ISUZU ENG)
35
3.2-W (3165CC) ENG - 1998-02 - V6 - 3.68 Bore (PASSPORT) (DOHC 6VD1 ISUZU ENG)
36
37
Belt
Belt
B-0303
223 TEETH
191 TEETH
3.5 (3471CC) ENG - 2005-13 - V6 - 89.0 MM Bore (J35A6,A7,A8,A9,J35Y1,J35Z1,Z2,Z3,Z4,Z5
ACCORD,CROSSTOUR,ODYSSEY,PILOT,RIDGELINE) (SOHC) 24V GAS VTEC,i-VTEC
Belt
B-0329
2005-2010 197 TEETH INTERFERENCE ENGINE APPLICATION
3.5 (3474CC) ENG - 1999-04 - V6 - 3.54 Bore (1999-04 ODYSSEY VAN, 2003-04 PILOT TRUCK)
J35A1, A4 (SOHC)
Belt
134
B-0221
B-0286
1999-2004 197 TEETH
HUMMER
5 Cyl.
Engine
Year
Line
3.5-6 (211) DOHC
2006
1
3.7-E (223) DOHC
2007-10
2
Line
No.
1
Part Title
2008-10
3
6.0-U (364) OHV
2003-07
4
Part No
3-195SC
Chain
195
728F
S908A
S913
BT5511
Engine
8 Cyl. (Continued)
6.2-2,8 (378) OHV
Year
Line
2008-09
5
Description
BT5512
BG5504
BG5506
BG6006
BG6007
INCLUDES [195P], [728FP], [S908AP], [S913P], [BT5511P],
[BT5512P], [BG5504P], [BG5506P], [BG6006P], [BG6007P]
168 LINKS TIMING CHAIN
110 LINKS BALANCE SHAFT CHAIN
58 TEETH
29 TEETH
REPLACES 1ST DESIGN SPRING TYPE TENSIONER;
CONVERT TO HYDRAULIC TENSIONER BY USING
CONVERSION KIT #89018114; (NOT INCLUDED) BALANCE
SHAFT CHAIN TENSIONER
TIMING CHAIN TENSIONER
TIMING CHAIN GUIDE; R.H.
TIMING CHAIN GUIDE; L.H.
TIMING CHAIN GUIDE; UPPER
BALANCE SHAFT CHAIN GUIDE
3.7-E (223) DOHC ENG - 2007-10 - 5 Cyl - 3.76 Bore H3,H3-T (GM ENG)
Timing Kit
3-195SA
Chain
195
728F
S908A
S913
BT5511
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
4
5.3-L,P (325) OHV
Timing Kit
Chain Guide
3
Line
3.5-6 (211) DOHC ENG - 2006 - 5 Cyl. - 3.66 Bore H3 (GM ENG)
Cam Sprocket
Crank Sprocket
Chain Tensioner
2
Year
8 Cyl.
Engine
BT5512
BG5504
BG5510
BG6006
BG6007
2007-2009 INCLUDES [195], [728F], [S908A], [S913], [BT5511],
[BT5512], [BG5504], [BG5510], [BG6006], [BG6007]
2007-2009 168 LINKS TIMING CHAIN
2007-2009 110 LINKS BALANCE SHAFT CHAIN
2007-2009 58 TEETH
2007-2009 29 TEETH
2007-2009 REPLACES 1ST DESIGN SPRING TYPE TENSIONER;
CONVERT TO HYDRAULIC TENSIONER BY USING
CONVERSION KIT #89018114; (NOT INCLUDED) BALANCE
SHAFT CHAIN TENSIONER
2007-2009 TIMING CHAIN TENSIONER
2007-2009 TIMING CHAIN GUIDE; R.H.
2007-2009 TIMING CHAIN GUIDE; L.H.
2007-2009 TIMING CHAIN GUIDE; UPPER
2007-2009 BALANCE SHAFT CHAIN GUIDE
5.3-L,P (325) OHV ENG - 2008-10 - 8 Cyl. - 3.78 Bore H3 (GM VORTEC) (P FLEX)
3pc Set
3-3SRH60S
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3SRH60
S894
S827
BT5490
2008-2009 INCLUDES [3SRH60], [S894] & [S827]; FOR USE
W/SINGLE BOLT CAMSHAFT
60 LINKS
2008-2009 44 TEETH; FOR USE W/SINGLE BOLT CAM
22 TEETH 22 TEETH
2008-2009
6.0-U (364) OHV ENG - 2003-07 - 8 Cyl. - 4.00 Bore H2 (GM VORTEC)
3pc Set
3-3SRH60SA
Chain
Cam Sprocket
3SRH60
S878
Crank Sprocket
S827
INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT
CAMSHAFT
60 LINKS
44 TEETH; FOR USE W/3BOLT CAMSHAFT RELUCTOR STYLE
CAM SPROCKET, HALF MOON HUB ON SPROCKET. MUST BE
USED WITH [3SRH60] CHAIN
22 TEETH 22 TEETH
Continued on Next Page
135
HUMMER (Continued)
Line
No.
4
Part Title
Part No
Description
6.0-U (364) OHV ENG - 2003-07 - 8 Cyl. - 4.00 Bore H2 (GM VORTEC) (Continued)
Chain Damper Adapter
Bracket
BD417-BRKT
BD417-DBRKT
5
2003-2006 ALLOWS THE USE OF THE LS2 TIMING CHAIN
DAMPER [BD417] ON ANY GM LS ENGINE BLOCK NOT
ORIGINALLY EQUIPPED FOR CHAIN DAMPERS; DAMPER NOT
INCLUDED EXCLUDES VVT ENGINES
2003-2006 ALLOWS THE USE OF THE LS2 TIMING CHAIN
DAMPER [BD417] ON ANY GM LS ENGINE BLOCK NOT
ORIGINALLY EQUIPPED FOR CHAIN DAMPERS; INCLUDES
[BD417] DAMPER EXCLUDES VVT ENGINES
6.2-2,8 (378) OHV ENG - 2008-09 - 8 Cyl. - 4.06 Bore H2 (GM VORTEC)
3SRH60
S827
Chain
Crank Sprocket
60 LINKS
22 TEETH 22 TEETH
HYUNDAI
Year
Line
1.5-J (1468CC) SOHC
1986-94
1
1.5-J (1495CC) SOHC
1993-95
2
1.5-N (1495CC) SOHC
1995-03
1.6-R (1596CC) DOHC
1992-95
1.6-C (1599CC) DOHC
1.6-C,N (1600CC) DOHC
4 Cyl.
Engine
Line
No.
1
Year
Line
1.8-M (1796CC) DOHC
1996-98
7
2.5-V (2493CC) DOHC
1999-01
12
1.8-M (1836CC) DOHC
1993-95
7
2.7-D,F (2656CC) DOHC
2001-09
13
3
2.0-F (1997CC) DOHC
1992-01
8
3.0-T (2972CC) SOHC
1990-98
14
4
2.4-S (2351CC) DOHC
1999-06
9
3.5 (3467CC) DOHC
2002-06
15
2006-11
5
2.4-S (2351CC) SOHC
1989-91
10
2001-05
6
2.4 (2359CC) DOHC
2006-13
11
Part Title
3
4
Part No
6 Cyl.
Engine
Year
Line
Description
1.5-J (1468CC) SOHC ENG - 1986-94 - 4 Cyl. - 75.5 MM Bore (EXCELL GL,GLS,GS,LS 1986-94)
(SCOUPE 1991-94) 8 VALVE MITSUBISHI ENGINE
Belt
2
Engine
4 Cyl. (Continued)
Cam Sprocket
Crank Sprocket
Belt Tensioner
B-0128
B-073
S670
S633
BD33
1990-1994 92 TEETH
1986-1989 92 TEETH
1986-1989 40 TEETH
1986-1989 20 TEETH
1.5-J (1495CC) SOHC ENG - 1993-95 - 4 Cyl. - 75.5 MM Bore (SCOUPE) 8 VALVE MITSUBISHI
ENGINE
Belt
B-0191
1994 92 TEETH
1.5-N (1495CC) SOHC ENG - 1995-03 - 4 Cyl. - 75.5 MM Bore ACCENT 12 VALVE G4EK
Belt
B-0191
1995-1999 92 TEETH
1.6-R (1596CC) DOHC ENG - 1992-95 - 4 Cyl. - 75.5 MM Bore (ELANTRA GL,GLS) 16 VALVE G4CR
MITSIBUSHI ENGINE
Belt
B-0165
B-0168
Belt Tensioner
BT194
BT197
BT225
151 TEETH CAMSHAFT BELT; INTERFERENCE ENG.
APPLICATION
65 TEETH BALANCE SHAFT BELT; INTERFERENCE ENG.
APPLICATION
RIGHT HAND; IDLER
BALANCE SHAFT BELT TENSIONER
CAMSHAFT BELT; ADJUSTER
5
1.6-C (1599CC) DOHC ENG - 2006-11 - 4 Cyl. - 76.5 MM Bore (ACCENT) 16V
6
1.6-C,N (1600CC) DOHC ENG - 2001-05 - 4 Cyl. - 75.5 Bore (ACCENT GL,GS) 16 VALVE ENGINE
7
Belt
Belt
B-0282
2006-2007 105 TEETH
105 TEETH
1.8-M (1836CC) DOHC ENG - 1993-95 - 4 Cyl. - 81.5 MM Bore (ELANTRA) G4CN
Belt
Continued on Next Page
136
B-0282
B-0167
153 TEETH CAMSHAFT BELT; INTERFERENCE ENG.
APPLICATION
HYUNDAI (Continued)
Line
No.
7
8
Part Title
Belt
B-0168
Belt Tensioner
BT194
BT197
BT225
B-0167
B-0168
BT194
BT197
BT225
153 TEETH CAMSHAFT
65 TEETH BAL. SHAFT
1992-1998 RIGHT HAND; CAMSHAFT BELT IDLER
1992 To 9/1995 BALANCE SHAFT
1992 To 9/1995
2.4-S (2351CC) DOHC ENG - 1999-06 - 4 Cyl. - 86.5 MM Bore (SONATA, SANTA FE)
Belt
B-0313
B-0314
175 TEETH CAMSHAFT BELT; INTERFERENCE ENGINE
APPLICATION
65 TEETH BALANCE SHAFT BELT; INTERFERENCE ENG.
APPLICATION
2.4-S (2351CC) SOHC ENG - 1989-91 - 4 Cyl. - 86.5 MM Bore (SONATA GL,GLS) MITSUBISHI
ENGINE
Belt
Belt Tensioner
11
65 TEETH BALANCE SHAFT BELT; INTERFERENCE ENG.
APPLICATION
RIGHT HAND; CAMSHAFT BELT ADJUSTER
BALANCE SHAFT BELT TENSIONER
CAMSHAFT BELT ADJUSTER
2.0-F (1997CC) DOHC ENG - 1992-01 - 4 Cyl. - 82 MM Bore (SONATA 1992-98) (TIBURON 1998-01)
G4CP ENGINE
Belt Tensioner
10
Description
1.8-M (1836CC) DOHC ENG - 1993-95 - 4 Cyl. - 81.5 MM Bore (ELANTRA) G4CN (Continued)
Belt
9
Part No
B-0124
BT105
BT161
1989-1991 123 TEETH CAMSHAFT BELT
CAMSHAFT BELT TENSIONER
BALANCE SHAFT BELT TENSIONER
2.4 (2359CC) DOHC ENG - 2006-13 - 4 Cyl. - 88.00 MM Bore (SANTA FE,SONATA,TUSCON) 16V
THETA II-PZEV,ULEV (GAS/ELECTRIC)
Timing Kit
3-900CS
3-900CSA
Chain
900C
901C
Cam Sprocket
Crank Sprocket
Chain Tensioner
S926
S931
S933
BT5557
BT5559
BT5560
BT5563
Chain Guide
BG5558
BG5561
2006-2007 KIT INCLUDES [900C], [901C], [S926], [S931], [S933],
[BT5557], [BT5559], [BT5560], [BT5563], [BG5558], [BG5561]
SONATA
2008-2011 KIT INCLUDES [900C], [901C], [S931], [S933],
[BT5557], [BT5559], [BT5560], [BT5563], [BG5558], [BG5561]
NOTE; DOES NOT INCLUDE CAM SPROCKET EXC. 2011 SANTA
FE & SONATA
2006-2011 90 LINKS TIMING CHAIN; EXC. 2011 SONATA &
SANTA FE
2006-2011 37 LINKS OIL PUMP CHAIN; EXC. 2011 SONATA &
SANTA FE
2006-2007 54 TEETH FRONT RIGHT; SONATA
2006-2011 27 TEETH OUTER; EXC. 2011 SONATA & SANTA FE
2006-2011 30 TEETH INNER; EXC. 2011 SONATA & SANTA FE
2006-2011 RIGHT HAND UPPER PRIMARY TIMING CHAIN
TENSIONER ARM; EXC. 2011 SONATA & SANTA FE
2006-2011 RIGHT HAND UPPER PRIMARY TIMING CHAIN
TENSIONER; EXC. 2011 SONATA & SANTA FE
2006-2011 LEFT HAND LOWER OIL PUMP CHAIN TENSIONER
ARM; EXC. 2011 SONATA & SANTA FE
2006-2011 LEFT HAND LOWER OIL PUMP CHAIN TENSIONER;
EXC. 2011 SONATA & SANTA FE
2006-2011 LEFT HAND UPPER PRIMARY TIMING CHAIN GUIDE;
EXC. 2011 SONATA & SANTA FE
2006-2011 RIGHT HAND LOWER OIL PUMP CHAIN GUIDE; EXC.
2011 SONATA & SANTA FE
137
HYUNDAI (Continued)
Line
No.
Part Title
Part No
Description
12
2.5-V (2493CC) DOHC ENG - 1999-01 - V6 - 80 MM Bore (SONATA GLS) G6BW
13
2.7-D,F (2656CC) DOHC ENG - 2001-09 - 6 Cyl. 86.7 MM Bore (TIBURON 2003-08) (TUSCON
2005-09) (SANTA FE 2001-09) (SONATA 2002-05)
14
15
B-0315
Belt
207 TEETH INTERFERENCE ENGINE APPLICATION
B-0315
Belt
207 TEETH INTERFERENCE ENGINE APPLICATION
3.0-T (2972CC) SOHC ENG - 1990-98 - V6 - 91.1 MM Bore (SONATA GL,GLS) MITSUBISHI ENGINE
Belt
B-0139
B-0139
Belt Tensioner
BT195
1990-1992 149 TEETH CAMSHAFT BELT
1993-1998 149 TEETH CAMSHAFT BELT; INTERFERENCE ENG.
APPLICATION
CAMSHAFT BELT TENSIONER
3.5 (3467CC) DOHC ENG - 2002-06 - 6 Cyl - 93.0 MM Bore (SANTA FE 2003-06) (XG350 2002-05)
Belt
B-0323
Belt Tensioner
Idler
BT271
BT227
259 TEETH CAMSHAFT BELT; INTERFERENCE ENG.
APPLICATION
TENSIONER PULLEY
IDLER PULLEY
I.H.C. TRACTOR & POWER UNITS
Engine
4 Cyl.
Year
Line
Engine
4 Cyl. (Continued)
Year
Line
C113
1
D166 DIESEL
1
C123
1
D188 DIESEL
1
C135
1
C248
1
C146
1
C264
1
C153
1
C281
1
Line
No.
Part Title
Part No
V304 ENG - 8 Cyl. - 3 7/8 Bore (815)
2
V345 ENG - 8 Cyl. - 3 7/8 Bore (815,915)
3336S
Year
Line
V304
1
V345
2
SET INCLUDES (1) [3316] CAM GEAR, (1) [3318] CRANK GEAR;
MUST REPLACE AS A SET ONLY
3336S
Gear Set
Engine
Description
1
Gear Set
8 Cyl.
SET INCLUDES (1) [3316] CAM GEAR, (1) [3318] CRANK GEAR;
MUST REPLACE AS A SET ONLY
I.H.C. TRUCK
Engine
Year
Line
2.5 4-152,4-152T
1961-71
1
3.2 OHV
1966-74
2
3.8 6-232
1969-71
3
DUTY
4.2 6-258
1973-74
4
6.8 (420) MEDIUM DUTY
4 Cyl.
6 Cyl.
8 Cyl.
Engine
8 Cyl. (Continued)
7.6-AA (466) MEDIUM
1972-75
8
9
DUTY DIESEL
6.6 (404) MV404 MEDIUM
1980
10
RD 501
1984-91
11
1965-70
5
7.3-AB (444) MEDIUM
6
DUTY DIESEL
5.6 (345)
1967-80
7
7.3 (446) MV446 MEDIUM
5.7 V345 MEDIUM DUTY
1980-85
8
DUTY
Part No
8 Cyl.
8.8 (537) V537 MEDIUM
Year
Line
1990-12
14
15
1980
16
DUTY
1961-80
1988-04
12
1980
13
DV550,DV550B DIESEL
17
Description
2.5 4-152,4-152T ENG - 4 Cyl. - 3.88 Bore (MODEL SCOUT,900A,C,CM,M SERIES VAN,M800,M800
POST OFFICE, M1100)
Gear Set
138
Engine
1974
DIESEL
Part Title
6 Cyl.
V400
5.0 V304,V304E
1
Line
6.4 (392)
4.4 V266
Line
No.
Year
3336S
SET INCLUDES (1) [3316] CAM GEAR, (1) [3318] CRANK GEAR;
MUST REPLACE AS A SET ONLY
Line
No.
2
I.H.C. TRUCK (Continued)
Part Title
4
5
Description
3.2 OHV ENG - 1966-74 - 4 Cyl. - 4.13 Bore (SCOUT, SCOUT II) (M800, M1100, M1200, MA1200)
4-196, 4-196E ENG.
Gear Set
3
Part No
3336S
SET INCLUDES (1) [3316] CAM GEAR, (1) [3318] CRANK GEAR;
MUST REPLACE AS A SET ONLY
3.8 6-232 ENG - 6 Cyl. - 3 3/4 Bore (MODEL SCOUT II, M800, M800 NAVY, M800 POST OFFICE,
MA1200, M1100,1200 & 1300, 1000B,C & D, 1010, 1100B,C,D)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-494S
494
S388
S355
INCLUDES [494], [S388] & [S355]
48 LINKS
36 TEETH STEEL
18 TEETH
4.2 6-258 ENG - 6 Cyl. - 3 3/4 Bore (MODEL SCOUT II, 100 & 200 SERIES)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-494S
494
S388
S355
INCLUDES [494], [S388] & [S355]
48 LINKS
36 TEETH STEEL
18 TEETH
4.4 V266 ENG - 1965-70 - 8 Cyl. - 3 5/8 Bore (MODEL
SCOUT,M1200,MA1200,908B,908C,1000B,1000C,1000D,1100C,1100D,1200B,1200C,1200D,1300B,1300C,1300D) INCLUDES VANS
Gear Set
3336S
SET INCLUDES (1) [3316] CAM GEAR, (1) [3318] CRANK GEAR;
MUST REPLACE AS A SET ONLY
6
5.0 V304,V304E ENG - 1961-80 - 8 Cyl. - 3.88 Bore (V304,V304E ENG.) INCLUDES VANS
7
5.6 (V345.V345E) ENG - 3.88 Bore (SCOUT
II,TRAVELALL,100,1000,1010,1100,1110,1200,1210,1300,1310,150,200,DM10,MS,MS1210 SERIES)
GAS/LPG
Gear Set
Gear Set
8
10
11
12
3336S
SET INCLUDES (1) [3316] CAM GEAR, (1) [3318] CRANK GEAR;
MUST REPLACE AS A SET ONLY
SET INCLUDES (1) [3316] CAM GEAR, (1) [3318] CRANK GEAR;
MUST REPLACE AS A SET ONLY
6.4 (392) ENG - 8 Cyl. - 4 1/8 Bore (MODEL SCOUT,TRAVELALL,MS,100,150,200,1010,1110,1210,
1310)
Gear Set
9
3336S
3336S
SET INCLUDES (1) [3316] CAM GEAR, (1) [3318] CRANK GEAR;
MUST REPLACE AS A SET ONLY
V400 ENG - 8 Cyl. - 4.17 Bore
Chain
Crank Sprocket
349
S281
62 LINKS
23 TEETH
6.6 (404) MV404 MEDIUM DUTY ENG - 8 Cyl. - 4 1/8 Bore (MODEL
CARGOSTAR,S1723,S1724,S1823,S1824,S1924,S1925) MEDIUM DUTY GAS ENG.
Gear Set
3335S
INCLUDES [3334] & [3329A]
6.8 (420) MEDIUM DUTY DIESEL ENG - 8 Cyl. - 4.110 Bore (MODEL
1452SC,1652SC,1652UPS,3700,3800,CARGOSTAR,F1954,G1954,M1400 MERTO II,M1600 METRO
II,S1654,S1753,S1853) MEDIUM DUTY TURBO DIESEL
Cam Gear
Crank Gear
3342
3341
106 TEETH
53 TEETH
7.3-AB (444) T444E MEDIUM DUTY DIESEL ENG - 1988-04 - 8 Cyl. - 4.110 Bore (ENG CODE T444E)
MEDIUM DUTY TURBO DIESEL
Cam Gear
Crank Gear
3342
3341
1988-1994 106 TEETH EXC. 1994 D.I. TURBO
1988-1994 53 TEETH EXC. 1994 D.I. TURBO
139
I.H.C. TRUCK (Continued)
Line
No.
13
14
15
16
Part Title
Part No
Description
7.3 (446) MV446 MEDIUM DUTY ENG - 8 Cyl. - 4 1/8 Bore (MODEL
CARGOSTAR,S1823,S1824,S1924,S1925) MEDIUM DUTY GAS ENG
3335S
Gear Set
INCLUDES [3334] & [3329A]
7.6-AA (466) MEDIUM DUTY DIESEL ENG - 6 Cyl. - 4.30 Bore (ENG CODES
DT466,DT466C,DTA466,DTA466C,DTI466C) TURBO DIESEL
3315
Crank Gear
33 TEETH
RD 501 ENG - 6 Cyl. - 4 1/2 Bore
3327S
Gear Set
INCLUDES [3325] & [3326]
8.8 (537) VS537 MEDIUM DUTY ENG - 8 Cyl. - 4 5/8 Bore (MODEL CARGOSTAR,S2125,S2524)
3320S
3320
3321
Gear Set
Cam Gear
Crank Gear
INCLUDES [3320] & [3321]
106 TEETH
53 TEETH
INFINITI
4 Cyl.
Engine
Year
Line
2.0 SR20DE DOHC
1991-96
1
DOHC ENG - 86.0 MM
1999-02
2
Bore
Line
No.
1
2
Part Title
Year
Line
3.0 VG30E SOHC
1990-92
3
3.0 VG30DE DOHC
1993-97
4
6 Cyl.
Engine
3.0 VQ30DE (DOHC)
1996-01
5
3.3 VG33E SOHC
1997-00
6
Part No
8 Cyl.
Engine
4.5 VH45DE DOHC
Line
1990-96
7
Description
2.0 SR20DE DOHC ENG - 1991-96 - 4 Cyl. - 86.0 MM Bore (1991-96 G20 BASE) (1994-96 G20 T)
1998CC
Timing Kit
3-3SRH124S
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
3SRH124
S724
S699
BT245
BG246
BG247
BG248
KIT INCLUDES [3SRH124], (2) [S724], [S699], [BT245], [BG246],
BG248], [BG247]
124 LINKS
36 TEETH (2) REQ.
18 TEETH
LEFT HAND
RIGHT HAND
UPPER
2.0 SR20DE DOHC ENG - 1999-02 - 4 Cyl. - 86.0 MM Bore (1999-02 G20 BASE, G20 T) 2000CC
Timing Kit
3-3SRH124S
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
3SRH124
S724
S699
BT245
BG246
BG247
BG248
KIT INCLUDES [3SRH124], (2) [S724], [S699], [BT245], [BG246],
BG248], [BG247]
124 LINKS
36 TEETH 2 REQ.
18 TEETH
LEFT HAND
RIGHT HAND
UPPER
3
3.0 VG30E SOHC ENG - 1990-92 - V6 - 87.0 MM Bore (M30)
4
3.0 VG30DE DOHC ENG - 1993-97 - V6 - 87.0 MM Bore (J30 BASE) (J30 T)
140
Year
Belt
Belt Tensioner
Belt
Belt Tensioner
Idler
B-0104
BT120
B-0251
BT260
BT5243
BT5244
BT5283
133 TEETH
228 TEETH
RIGHT HAND
RIGHT HAND
UPPER
LEFT HAND
INFINITI (Continued)
Line
No.
5
Part Title
Part No
Description
3.0 VQ30DE (DOHC) ENG - 1996-01 - V6 - 93.0 MM Bore (I30)
Timing Kit
3-4207S
3-4207SX
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
4207C
4208C
S884
S886
S888
S885
BT5436
BT5437
BT5441
BT5442
BG5438
BG5439
BG5440
KIT INCLUDES [4207C], (2) [4208C], (2) [S884], (2) [S886], (2)
[S888], [S885], [BG5438], [BG5439], [BG5440], [BT5436],
[BT5437], [BT5441], [BT5442] (INCLUDES SPROCKETS)
KIT INCLUDES [4207C], (2) [4208C], BG5438], [BG5439],
[BG5440], [BT5436], [BT5437], [BT5441], [BT5442] (DOES NOT
INCLUDES SPROCKETS)
138 LINKS LOWER
44 LINKS UPPER
42 TEETH INTAKE & EXHAUST; OUTER; 2 REQ.
42 TEETH EXHAUST; INNER; 2 REQ.
42 TEETH INTAKE; INNER; 2 REQ.
21 TEETH
HYD LOWER RIGHT HAND
TENSIONER ARM
UPPER LEFT HAND
UPPER RIGHT HAND
UPPER
LEFT LOWER
LEFT UPPER
6
3.3 VG33E SOHC ENG - 1997-00 - V6 - 91.5 MM Bore (QX4)
7
4.5 VH45DE DOHC ENG - 1990-96 - V8 - 93.0 MM Bore (Q45)
Belt
Belt Tensioner
Chain
Chain Guide
B-0249
BT120
4178C
4179C
BG5251
BG5251
BG5253
BG5254
BG5255
BG5256
BG5257
133 TEETH CAMSHAFT BELT
CAMSHAFT BELT TENSIONER
120 LINKS 2 REQ.; ENGINE TIMING CHAIN
78 LINKS OIL PUMP CHAIN
1990-1996 UPPER LEFT HAND; FOR CAMSHAFT CHAIN
1990-1996 UPPER RIGHT HAND; FOR CAMSHAFT CHAIN
1990 To 07/92 FRONT RIGHT HAND; TENSION SIDE; FOR
CAMSHAFT CHAIN
1990-1996 FRONT LEFT HAND; LOOSE SIDE; FOR CAMSHAFT
CHAIN
1990-1996 UPPER; FOR OIL PUMP CHAIN
1990-1996 LOWER; FOR OIL PUMP CHAIN
1990-1996 FRONT RIGHT HAND; SLACK SIDE; FOR CAMSHAFT
CHAIN
141
ISUZU
4 Cyl.
Engine
Year
Line
1.5 (4XC1) SOHC
1985-89
1
1.6 (RLR) SOHC
1991-93
2
1.6 DOHC
1989-92
1.8-P (4FB1) SOHC
1981-84
1.8-B,N (G180Z) SOHC
1981-84
5
1.8 (RLX) DOHC
1992
6
1.9 (G200Z) SOHC
1983-87
7
2.0 (4ZC1) SOHC
1985-89
2.2 (X22SE) DOHC
2.2-4 (134) OHV
Engine
4 Cyl. (Continued)
Year
Line
Engine
6 Cyl. (Continued)
Year
Line
2.3 (4ZD1) SOHC
1986-95
13
3.2-W (3165CC) DOHC
1998
22
2.3 (F23A7) SOHC
1998-99
14
3.2-W (3165CC) 6VD1
2001-04
23
3
2.6-E (4ZE1) SOHC
1988-97
15
DOHC
4
6 Cyl.
1998-04
24
1989-91
16
5 Cyl.
3.5-6 (211) DOHC
2006
25
2.8-8 (169) DOHC
2006
17
3.7-E (223) DOHC
2007-08
26
8
2.9-9 (178) DOHC
2007-08
18
1998-03
9
4.2-S (256) DOHC
2003-08
27
1996-00
10
6 Cyl.
6 Cyl.
3.1-Z (LG6) OHV
1991-94
19
4.3-X (262) OHV
1997-99
28
2.2 (F22B6) SOHC
1996-97
11
3.2-V (6VD1) SOHC
1992-97
20
2.2-S (2238CC) OHV
1981-87
12
3.2-W (3165CC) DOHC
1992-95
21
8 Cyl.
2003-06
29
Line
No.
1
2
3
4
5
Part Title
7
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
142
Part No
5.3-M,P (323) OHV
Description
B-0118
B-0162
S626
S641
BT134
1985 To 6/86 112 TEETH
From 7/86 TO 1989 112 TEETH
46 TEETH
23 TEETH
1.6 (RLR) SOHC ENG - 1991-93 - 4 Cyl. - 80 MM Bore (STYLUS)
Belt
B-0177
112 TEETH
1.6 DOHC ENG - 1989-92 - 4 Cyl. - 80 MM Bore (1989 4XE1 I-MARK) (1990-91 4XE1W IMPLUSE)
(1991 4XE1W STYLUS) (1990-92 4XE1WT IMPLUSE TURBO)
Belt
B-0169
159 TEETH
1.8-P (4FB1) SOHC ENG - 1981-84 - 4 Cyl. - 84 MM Bore (I-MARK) (FI DIESEL)
Belt
Belt Guide
B-076
BG94
134 TEETH
1.8-B,N (G180Z) SOHC ENG - 1981-84 - 4 Cyl. - 84 MM Bore (1981-82 PICK-UP) (1981-84 I-MARK)
(GAS CARB)
Damper
3SR94-1
3SR94
S500
S501
BT17
BT63
BD34
KIT INCLUDES [3SR94], [S500], [S501], [BT17], [BT63] & [BD34]
94 LINKS
38 TEETH
19 TEETH
ADJUSTER
TENSIONER
1.8 (RLX) DOHC ENG - 1992-92 - 4 Cyl. - 80 MM Bore (4XF1 ENG IMPULSE XS & STYLUS RS)
Belt
B-0205
163 TEETH
1.9 (G200Z) SOHC ENG - 1983-87 - 4 Cyl. - 87 MM Bore (1983-85 IMPULSE) (1983-87 PICK-UP)
(1984-85 TROOPER II)
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
8
4 Cyl.
1.5 (4XC1) SOHC ENG - 1985-89 - 4 Cyl. - 77 MM Bore (I-MARK)
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
6
3.5 (6VE1) DOHC
2.8-R (LL2) OHV
Damper
3SR94-2
3SR94
S500
S501
BT61
BT63
BD34
KIT INCLUDES [3SR94], [S500], [S501], [BT63], [BT61] & [BD34]
94 LINKS
38 TEETH
19 TEETH
ADJ.
TENSIONER
2.0 (4ZC1) SOHC ENG - 1985-89 - 4 Cyl. - 88.0 MM Bore (IMPULSE TURBO)
Belt
Belt Tensioner
B-0121
BT263
111 TEETH
ISUZU (Continued)
Line
No.
9
10
Part Title
Part No
2.2 (X22SE) DOHC ENG - 1998-03 - 4 Cyl. - 86.0 MM Bore (1999-00 AMIGO) (1998-03 RODEO)
(2001-03 RODEO SPORT)
Belt
B-0305
3pc Set
3-370SA
Chain
Cam Thrust Plate Spacer
Cam Sprocket
Crank Sprocket
Chain Tensioner
395
MG221
S774
S549
BT5115
13
14
Belt
B-0186
Belt Tensioner
BT203
16
17
70 TEETH BALANCE SHAFT; INTERFERENCE ENG.
APPLICATION
113 TEETH CAMSHAFT BELT; INTERFERENCE ENG.
APPLICATION
CAMSHAFT BELT TENSIONER
2.2-S (2238CC) OHV ENG - 1981-87 - 4 Cyl. - 88.0 MM Bore (PICK-UP,TROOPER) (NON TURBO
DIESEL)
Belt
B-075
87 TEETH
2.3-L (4ZD1) SOHC ENG - 1986-95 - 4 Cyl. - 89.4 MM Bore (AMIGO, IMPULSE, PICK-UP &
TROOPER)
Belt
Belt Tensioner
B-0122
BT263
115 TEETH
2.3 (F23A7) SOHC ENG - 1998-99 - 4 Cyl. - 86.0 MM Bore (OASIS) HONDA ENG. VTEC
Belt
B-0186
B-0244
15
INCLUDES [395], [S774], [S549] & [MPC-393] FINE FINISH
CHAIN SET; CHECK FOR POSSIBLE OILING PROBLEM WHEN
INSTALLING SET; DOES NOT INCLUDE TENSIONER
INCLUDES [370], [S774], [S549], [BT5115] & [MPC-393] FINE
FINISH CHAIN SET; CHECK FOR POSSIBLE OILING PROBLEM
WHEN INSTALLING SET
58 LINKS SILENT CHAIN
1996-1997
40 TEETH
20 TEETH
FOR USE WITH BOTH [370] AND [395] CHAINS
2.2 (F22B6) SOHC ENG - 1996-97 - 4 Cyl. - 85 MM Bore (OASIS)
B-0187
12
171 TEETH
2.2-4 (134) OHV ENG - 1996-00 - 4 Cyl. - 89 MM Bore (HOMBRE)
3-395S
11
Description
Belt Tensioner
BT203
70 TEETH BALANCE SHAFT BELT; INTERFERENCE ENG.
APPLICATION
112 TEETH CAMSHAFT BELT; INTERFERENCE ENG.
APPLICATION
CAMSHAFT BELT TENSIONER
2.6-E (4ZE1) SOHC ENG - 1988-97 - 4 Cyl. - 92.6MM Bore (1988-91 TROOPER II) (1988-95 PICK-UP)
(1989-94 AMIGO (1990-97 RODEO)
Belt
B-0147
137 TEETH
2.8-R (LL2) OHV ENG - 1989-91 - V6 - 89 MM Bore (1989 TROOPER II) (1990-91 TROOPER) GM
ENG.
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-373S
373
S506
S511
BD59
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
2.8-8 (169) DOHC ENG - 2006 - 4 Cyl. - 92.96 MM Bore (i-280) GM ENGINE
Timing Kit
3-195SC
Chain
195
728F
S908A
S913
Cam Sprocket
Crank Sprocket
INCLUDES [195P], [728FP], [S908AP], [S913P], [BT5511P],
[BT5512P], [BG5504P], [BG5506P], [BG6006P], [BG6007P]
168 LINKS TIMING CHAIN
110 LINKS BALANCE SHAFT CHAIN
58 TEETH
29 TEETH
Continued on Next Page
143
ISUZU (Continued)
Line
No.
17
Part Title
Description
2.8-8 (169) DOHC ENG - 2006 - 4 Cyl. - 92.96 MM Bore (i-280) GM ENGINE (Continued)
Chain Tensioner
Chain Guide
18
Part No
BT5511
BT5512
BG5504
BG5506
BG6006
BG6007
REPLACES 1ST DESIGN SPRING TYPE TENSIONER;
CONVERT TO HYDRAULIC TENSIONER BY USING
CONVERSION KIT #89018114; (NOT INCLUDED) BALANCE
SHAFT CHAIN TENSIONER
TIMING CHAIN TENSIONER
TIMING CHAIN GUIDE; R.H.
TIMING CHAIN GUIDE; L.H.
TIMING CHAIN GUIDE; UPPER
BALANCE SHAFT CHAIN GUIDE
2.9-9 (178) DOHC ENG - 2007-08 - 4 Cyl. - 95.5 MM Bore (i-290)
Timing Kit
3-195SA
Chain
195
728F
S908A
S913
BT5511
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
BT5512
BG5504
BG5510
BG6006
BG6007
INCLUDES [195], [728F], [S908A], [S913], [BT5511], [BT5512],
[BG5504], [BG5510], [BG6006], [BG6007]
168 LINKS TIMING CHAIN
110 LINKS BALANCE SHAFT CHAIN
58 TEETH
29 TEETH
REPLACES 1ST DESIGN SPRING TYPE TENSIONER;
CONVERT TO HYDRAULIC TENSIONER BY USING
CONVERSION KIT #89018114; (NOT INCLUDED) BALANCE
SHAFT CHAIN TENSIONER
TIMING CHAIN TENSIONER
TIMING CHAIN GUIDE; R.H.
TIMING CHAIN GUIDE; L.H.
TIMING CHAIN GUIDE; UPPER
BALANCE SHAFT CHAIN GUIDE
19
3.1-Z (LG6) OHV ENG - 1991-94 - V6 - 89 MM Bore (1991-94 PICK-UP) (1991-92 RODEO) (GM ENG)
20
3.2-V (6VD1) SOHC ENG - 1992-97 - V6 - 93.4 MM Bore (SOHC RLU ENG)(1992-97 TROOPER &
1993-97 RODEO)
21
22
23
24
25
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
Belt
B-0221
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
223 TEETH
3.2-W (3165CC) DOHC ENG - 1992-95 - 6 Cyl. - 93.4 MM Bore (TROOPER)
Belt
B-0220
218 TEETH
3.2-W (3165CC) DOHC ENG - 1998 - 6 Cyl. - 93.4 MM Bore (AMIGO)
Belt
B-0303
191 TEETH
3.2-W (3165CC) 6VD1 DOHC ENG - 2001-04 - 6 Cyl. -93.4 MM Bore (2001-04 RODEO) (2001-03
RODEO SPORT)
Belt
B-0303
191 TEETH
3.5 (6VE1) DOHC ENG - 1998-04 - V6 - 93.4 MM Bore (AXIOM,RODEO,TROOPER,VEHICROSS)
Belt
B-0303
191 TEETH EXC. DIRECT FUEL INJECTION ENGINE
3.5-6 (211) DOHC ENG - 2006 - 5 Cyl. - 92.96 MM Bore (i-350) GM ENGINE
Timing Kit
3-195SC
Chain
195
728F
S908A
S913
Cam Sprocket
Crank Sprocket
Continued on Next Page
144
3-373S
373
S506
S511
BD59
INCLUDES [195P], [728FP], [S908AP], [S913P], [BT5511P],
[BT5512P], [BG5504P], [BG5506P], [BG6006P], [BG6007P]
168 LINKS TIMING CHAIN
110 LINKS BALANCE SHAFT CHAIN
58 TEETH
29 TEETH
ISUZU (Continued)
Line
No.
25
Part Title
Chain Tensioner
BT5511
BT5512
BG5504
BG5506
BG6006
BG6007
REPLACES 1ST DESIGN SPRING TYPE TENSIONER;
CONVERT TO HYDRAULIC TENSIONER BY USING
CONVERSION KIT #89018114; (NOT INCLUDED) BALANCE
SHAFT CHAIN TENSIONER
TIMING CHAIN TENSIONER
TIMING CHAIN GUIDE; R.H.
TIMING CHAIN GUIDE; L.H.
TIMING CHAIN GUIDE; UPPER
BALANCE SHAFT CHAIN GUIDE
3.7-E (223) DOHC ENG - 2007-08 - 5 Cyl. - 95.5 MM Bore (i-370)(GM ENG.)
Timing Kit
3-195SA
Chain
195
728F
S908A
S913
BT5511
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
27
Description
3.5-6 (211) DOHC ENG - 2006 - 5 Cyl. - 92.96 MM Bore (i-350) GM ENGINE (Continued)
Chain Guide
26
Part No
BT5512
BG5504
BG5510
BG6006
BG6007
INCLUDES [195], [728F], [S908A], [S913], [BT5511], [BT5512],
[BG5504], [BG5510], [BG6006], [BG6007]
168 LINKS TIMING CHAIN
110 LINKS BALANCE SHAFT CHAIN
58 TEETH
29 TEETH
REPLACES 1ST DESIGN SPRING TYPE TENSIONER;
CONVERT TO HYDRAULIC TENSIONER BY USING
CONVERSION KIT #89018114; (NOT INCLUDED) BALANCE
SHAFT CHAIN TENSIONER
TIMING CHAIN TENSIONER
TIMING CHAIN GUIDE; R.H.
TIMING CHAIN GUIDE; L.H.
TIMING CHAIN GUIDE; UPPER
BALANCE SHAFT CHAIN GUIDE
4.2-S (256) DOHC ENG - 2003-08 - 6 Cyl. - 93 MM Bore (ASCENDER) GM ENG VORTEC
Timing Kit
3-195S
3-195SB
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
195
S908A
S913
BT5512
BG5504
BG5506
BG5510
BG6006
2003-2007 INCLUDES [195], [S908A], [S913], [BT5512], [BG5504],
[BG5506], [BG6006]
2008 INCLUDES [195], [S908A], [S913], [BT5512], [BG5504],
[BG5510], [BG6006]
168 LINKS
58 TEETH
29 TEETH
RIGHT HAND
2003-2007 LEFT HAND
2008 LEFT HAND
2003-2007 UPPER
28
4.3-X (262) OHV ENG - 1997-99 - V6 - 101.6 Bore (HOMBRE) VORTEC
29
5.3-M,P (323) OHV ENG - 2003-06 - 8 Cyl. - 96 MM Bore (ASCENDER) GM ENG VORTEC
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-509S
499
S776
S505
3pc Set
3-3SRH60SA
Chain
Cam Sprocket
Crank Sprocket
Damper
3SRH60
S878
S827
BD417
INCLUDES [499], [S776] & [S505]
46 LINKS
36 TEETH
18 TEETH
INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT
CAMSHAFT
60 LINKS
44 TEETH; FOR USE W/3BOLT CAMSHAFT
22 TEETH 22 TEETH
145
JAGUAR
Year
Line
2.4 2483CC DOHC
1956-62
1
3.4 3442CC DOHC
1949-61
2
6 Cyl.
Engine
Line
No.
Part Title
Engine
Year
Line
3.8 3781CC DOHC
1958-67
3
4235CC 4.2 DOHC
1972-87
4
6 Cyl. (Continued)
Part No
Engine
2.4 2483CC DOHC ENG - 1956-62 - 6 Cyl. - 83 MM Bore
2
3.4 3442CC DOHC ENG - 1949-61 - 6 Cyl. - 83 MM Bore
3
3.8 3781CC DOHC ENG - 1958-67 - 6 Cyl. - 87.0 MM Bore
4
4.2 4235CC DOHC ENG - 1972-87 - 6 Cyl. - 92 MM Bore (VANDEN PLAS, XJ6)
3DR100
3DR68
100 LINKS UPPER
82 LINKS LOWER
3DR100
3DR82
Chain
Line
1949-1961 100 LINKS UPPER
1949-1961 82 LINKS LOWER
3DR100
3DR82
Chain
Year
1956-1962 100 LINKS UPPER
1956-1962 68 LINKS LOWER
3DR100
3DR82
Chain
Line
Description
1
Chain
Year
1972-1987 100 LINKS UPPER
1972-1987 82 LINKS LOWER
JEEP
4 Cyl.
Engine
Year
Line
Engine
6 Cyl. (Continued)
Year
Line
Engine
8 Cyl. (Continued)
134 F-HEAD
1950-73
1
225
1966-71
9
5.2 (318)
1993-98
17
134 L-HEAD
1942-54
2
226
1957-65
10
327
1965-68
18
134 L-HEAD
1956-65
3
3.8-1 (231) OHV
2007-11
11
5.7-2,T (345) OHV ENG
2005-14
19
2.4-1 (148) DOHC
2002-06
4
232 OHV
1965-78
12
350
1968-71
20
2.5-E,H,P,U (150)
1983-02
5
4.0-L,M,S (242) OHV
1987-06
13
5.9 (360)
1971-91
21
151 2.5L (GM)
1980-83
6
4.2 (258) OHV
1971-90
14
5.9 (360)
1998
22
6.1-3,W (370) OHV
2006-10
23
401
1974-78
24
6 Cyl.
2.8 (173)
1984-86
7
3.7-K (226) SOHC
2002-13
8
Line
No.
Part Title
8 Cyl.
4.7-J,N,P (285) SOHC
1999-10
15
304
1972-81
16
Part No
Description
1
134 F-HEAD ENG - 1950-73 - 4 Cyl. - 3 1/8 Bore
2
134 L-HEAD ENG - 1942-54 - 4 Cyl. - 3.13 Bore (WILLYS)
3
4
5
Cam Gear
Crank Gear
Cam Gear
Crank Gear
2900
2901
56 TEETH FIBER
28 TEETH
56 TEETH FIBER AFTER ENG. #44417
28 TEETH AFTER ENG. #44417
134 L-HEAD ENG - 1956-65 - 4 Cyl. 3.13 Bore (DISPATCHER,DJ3,FC150,FC170,UNIVERSAL
TRUCK,WILLYS)
Cam Gear
Crank Gear
2900
2901
56 TEETH FIBER AFTER ENG. #44417
28 TEETH AFTER ENG. #44417
2.4-1 (148) DOHC ENG. - 2002-06 - 4 Cyl. - 3.44 Bore (LIBERTY, WRANGLER) POWER TECH
Chain
Belt
Balance Shaft Sprocket
Chain Tensioner
Chain Guide
201
B-0265
S642
BT298
BG297
60 LINKS BALANCE SHAFT CHAIN
146 TEETH CAMSHAFT BELT
18 TEETH
2003 BALANCE SHAFT CHAIN TENSIONER
2003 BALANCE SHAFT CHAIN GUIDE
2.5-E,H,P,U (150) ENG - 1983-02 - 4 Cyl. - 3.876 Bore
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Continued on Next Page
146
2900
2901
3-3SR64S
3-3SR64
3SR64
S608
S607
KIT INCLUDES [3SR64], [S607], [S608], [BT167], [BG337]
INCLUDES [3SR64], [S608] & [S607]
64 LINKS
48 TEETH
24 TEETH
JEEP (Continued)
Line
No.
Part Title
Part No
Description
5
2.5-E,H,P,U (150) ENG - 1983-02 - 4 Cyl. - 3.876 Bore (Continued)
6
151 2.5L (GM) ENG - 1980-83 - 4 Cyl. - 4.000 Bore (GM ENG.)
7
8
Chain Tensioner
Chain Guide
Gear Set
Cam Gear
Crank Gear
Cam Thrust Plate Spacer
BT167
BG337
2542S
2542
2537
MG221
FIBER INCLUDES [2542] & [2537]
54 TEETH FIBER
27 TEETH
2.8 (173) ENG - 1984-87 - V6 - 3.504 Bore (CHEV)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-373S
373
S506
S511
BD59
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
3.7-K (226) SOHC ENG - 2002-13 - V6 - 3.66 Bore (COMMANDER,GRAND CHEROKEE,LIBERTY)
Timing Kit
3-393SA
3-393SB
3-393SD
Chain
Cam Sprocket
Crank Sprocket
Idler Sprocket
Chain Tensioner
Chain Guide
9
DAMPER
194
393
S824
S832
S868
S861
S863
BT418
BT431
BT432
BT433
BG434
BG435
2002-2003 KIT INCLUDES [393], (2) [194], [S861], [S824], [S832],
[BT418], [BT431], [BT432], (2) [BT433], [BG434], [BG435], [S863]
THIS KIT CONTAINS THE S832 JTEC CAM SPROCKET
2002-2011 KIT INCLUDES [393], (2) [194], [BT418], [BT431],
[BT432], (2) [BT433], [BG434], [BG435] THIS KIT CONTAINS NO
SPROCKETS; SPROCKETS MUST BE PURCHASED
SEPERATELY TO COMPLETE KIT
2004-2011 KIT INCLUDES [393], (2) [194], [S824], [S868], [S861],
[S863], [BT418], [BT431], [BT432], (2) [BT433], [BG434], [BG435]
THIS KIT CONTAINS THE S868 NGC CAM SPROCKET
2002-2011 94 LINKS SECONDARY; 2 REQUIRED
2002-2011 70 LINKS PRIMARY
26 TEETH LEFT HAND
2002-2003 26 TEETH RIGHT HAND W/JTEC SPROCKET
2004-2013 26 TEETH RIGHT HAND W/NGC SPROCKET
25 TEETH
2002-2011 50 TEETH PRIMARY; DOES NOT INCLUDE DRIVE
SHAFT
2002-2011 PRIMARY TENSIONER
SECONDARY TENSIONER; RIGHT
SECONDARY TENSIONER; LEFT
2002-2011 SECONDARY ARM; 2 REQUIRED
2002-2011 SECONDARY RIGHT
2002-2011 SECONDARY LEFT
225 ENG - 1966-71 - V6 - 3.75 Bore (BUICK ENG)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-359S
359
S334
S323
BD44
BD45
INCLUDES [359], [S334] & [S323]
54 LINKS
40 TEETH
20 TEETH
RIGHT HAND W/SPRING
LEFT HAND
10
226 ENG - 1957-65 - 6 Cyl. - 3 5/16 Bore (FC150, FC170, WILLYS)
11
3.8-1 (231) OHV ENG - 2007-2011 - 6 Cyl. - 3.78 Bore (WRANGLER)
Chain
Cam Thrust Plate
3pc Set
Chain
505
MD100
3-3235S
300
46 LINKS 3/4" WIDE
.297 PLATE THICKNESS FOR USE W/S934 CAM SPROCKET
INCLUDES [300], [S934], [S927] & [MD100]
64 LINKS
Continued on Next Page
147
JEEP (Continued)
Line
No.
11
12
13
Part Title
Part No
3.8-1 (231) OHV ENG - 2007-2011 - 6 Cyl. - 3.78 Bore (WRANGLER) (Continued)
Cam Sprocket
S934
Crank Sprocket
S927
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-494S
494
S388
S355
Timing Kit
3-385SA
3-385SB
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Guide
3-4SR48
385
4SR48
S688
S808
S822
S689
S809
BG337
1994-1995 KIT INCLUDES [385], [S808], [S809], [BG337]
WRANGLER
1994-1998 KIT INCLUDES [385], [S808], [S809], [BG337]
CHEROKEE, GRAND CHEROKEE, TJ (CHEROKEE & GRAND
CHEROKEE USE THIS KIT W/MC1376 CAMSHAFT)
1997-1998 KIT INCLUDES [385], [S808], [S809], [BG337]
WRANGLER (USE THIS KIT W/MC1376 CAMSHAFT)
1999-2006 KIT INCLUDES [385], [S809], [S822], [BG337]
CHEROKEE, GRAND CHEROKEE, TJ (CHEROKEE & GRAND
CHEROKEE USE THIS KIT W/MC1377 CAMSHAFT)
1987-1993 INCLUDES [4SR48], [S688] & [S689]
1994-2006 64 LINKS
1987-1993 48 LINKS
1987-1993 36 TEETH
1994-1998 48 TEETH
1999-2006 45 TEETH
1987-1993 18 TEETH
1994-2006 24 TEETH
4.2 (258) OHV ENG - 1971-90 - 6 Cyl. - 3.75 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-494S
494
S388
S355
INCLUDES [494], [S388] & [S355]
48 LINKS
36 TEETH
18 TEETH
4.7-J,N,P (285) SOHC ENG - 1999-10 - 8 Cyl. - 3.66 Bore (2006-10 COMMANDER, 1999-10 GRAND
CHEROKEE)GAS, FLEX
Timing Kit
3-393S
3-393SC
3-393SX
Chain
Cam Sprocket
Crank Sprocket
Continued on Next Page
148
INCLUDES [494], [S388] & [S355]
48 LINKS
36 TEETH
18 TEETH
4.0-L,M,S (242) OHV ENG - 1987-06 - 6 Cyl. - 98.5 MM Bore
3-385SA
15
40 TEETH USE NEW THRUST PLATE SUPPLIED W/THIS
SPROCKET
20 TEETH
232 OHV ENG - 1965-78 - 6 Cyl. - 3.75 Bore
3-385SA
14
Description
393
394
S852
S854
S870
S861
1999-2001 KIT INCLUDES [393], (2) [394], [S852], [S854], [S861],
[S863], [S865], [BT418], [BT419], [BT420], (2) [BD421], (2) [BG422]
W/JTEC CAM SPROCKET
2002-2006 KIT INCLUDES [393], (2) [394], [S852], [S870], [S861],
[BT418], [BT419], [BT420], (2) [BD421], (2) [BG422], [S863], [S865]
W/NGC CAM SPROCKET; DOES NOT INCLUDE INSTALLATION
BOLTS
1999-2006 KIT INCLUDES [393], (2) [394], [BT418], [BT419],
[BT420], (2) [BD421], (2) [BG422] NOTE; THIS KIT DOES NOT
CONTAIN SPROCKETS
1999-2009 70 LINKS PRIMARY CHAIN; EXCLUDES 2009 GRAND
CHEROKEE
1999-2006 53 LINKS SECONDARY CHAIN; (2) REQ.
1999-2006 30 TEETH LEFT HAND
1999-2001 30 TEETH RIGHT HAND; W/ JTEC TARGET WHEEL
2002-2006 30 TEETH RIGHT HAND; W/ NGC TARGET WHEEL
1999-2009 25 TEETH EXC. 2009 GRAND CHEROKEE
JEEP (Continued)
Line
No.
15
Part Title
Part No
4.7-J,N,P (285) SOHC ENG - 1999-10 - 8 Cyl. - 3.66 Bore (2006-10 COMMANDER, 1999-10 GRAND
CHEROKEE)GAS, FLEX (Continued)
Idler Sprocket
S863
Chain Tensioner
S865
BT418
BT419
BT420
16
Description
Damper
BD421
Chain Guide
BG422
1999-2009 50 TEETH PRIMARY; EXC. 2007-09 GRAND
CHEROKEE
1999-2006 30 TEETH SECONDARY
1999-2009 PRIMARY TENSIONER; EXC. 2009 GRAND
CHEROKEE
1999-2009 HYD SECONDARY RIGHT HAND TENSIONER; EXC.
2009 GRAND CHEROKEE
1999-2009 HYD SECONDARY LEFT HAND TENSIONER; EXC.
2009 GRAND CHEROKEE
1999-2009 SECONDARY TENSIONER ARM; (2) REQUIRED; EXC.
2009 GRAND CHEROKEE
1999-2009 SECONDARY GUIDE; (2) REQUIRED; EXC. 2009
GRAND CHEROKEE
304 ENG - 1972-81 - 8 Cyl. - 3 3/4 Bore
3pc Set
3-349S
3-374SA
Chain
Cam Sprocket
Crank Sprocket
349
374
S512
S281
S515
INCLUDES [349], [S412] & [S281]; INCLUDES 7/8" WIDE CHAIN;
USE AS A SET ONLY
INCLUDES [374], [S512] & [S515]; INCLUDES 3/4" WIDE CHAIN;
USE AS A SET ONLY
62 LINKS 7/8" WIDE
62 LINKS 3/4" WIDE
46 TEETH USE W/3/4" WIDE CHAIN
23 TEETH USE W/7/8" WIDE CHAIN
23 TEETH USE W/3/4" WIDE CHAIN
17
5.2 (318) ENG - 1993-98 - 8 Cyl. - 3.91 Bore
18
327 ENG - 1965-68 - 8 Cyl. - 4.000 Bore
19
20
21
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain
Crank Sprocket
3-380S
380
S712
S721
349
S281
INCLUDES [380], [S712] & [S721]
68 LINKS
46 TEETH
23 TEETH
62 LINKS
23 TEETH
5.7-2,T (345) OHV ENG - 2005-14 - 8 Cyl. - 3.92 Bore (COMMANDER,GRAND CHEROKEE) HEMI
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-704S
704
S896
S889
BT5489
2005-2008 KIT INCLUDES (1) 704, (1) S896, (1) S889, (1) BT5489
2005-2008 86 LINKS
2005-2008 52 TEETH
2005-2008 26 TEETH
2005-2008
350 ENG - 1968-71 - 8 Cyl. - 3.800 Bore (BUICK ENG)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-359S
359
S334
S323
INCLUDES [359], [S334] & [S323]
54 LINKS
40 TEETH
20 TEETH
5.9 (360) ENG - 1971-91 - 8 Cyl. - 4.080 Bore
3pc Set
3-349S
3-374SA
Chain
Cam Sprocket
Crank Sprocket
349
374
S512
S281
INCLUDES [349], [S412] & [S281]; INCLUDES 7/8" WIDE CHAIN;
USE AS A SET ONLY
INCLUDES [374], [S512] & [S515]; INCLUDES 3/4" WIDE CHAIN;
USE AS A SET ONLY
62 LINKS 7/8" WIDE
62 LINKS 3/4" WIDE
46 TEETH USE W/3/4" WIDE CHAIN
23 TEETH USE W/7/8" WIDE CHAIN
Continued on Next Page
149
JEEP (Continued)
Line
No.
Part Title
Part No
Description
21
5.9 (360) ENG - 1971-91 - 8 Cyl. - 4.080 Bore (Continued)
22
5.9-Z (360) ENG - 1998 - V8 - 4.000 Bore (GRAND CHEROKEE)
23
24
S515
Crank Sprocket
23 TEETH USE W/3/4" WIDE CHAIN
3-380S
380
S712
S721
3pc Set
Chain
Cam Sprocket
Crank Sprocket
INCLUDES [380], [S712] & [S721]
68 LINKS
46 TEETH
23 TEETH
6.1-3,W (370) OHV ENG - 2006-10 - 8 Cyl. - 4.06 Bore (GRAND CHEROKEE SRT8) HEMI
3-704S
704
S896
S889
BT5489
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
KIT INCLUDES (1) 704, (1) S896, (1) S889, (1) BT5489
86 LINKS
52 TEETH
26 TEETH
401 ENG - 1974-78 - 8 Cyl. - 4.165 Bore
3-349S
3pc Set
3-374SA
349
374
S512
S281
S515
Chain
Cam Sprocket
Crank Sprocket
INCLUDES [349], [S412] & [S281]; INCLUDES 7/8" WIDE CHAIN;
USE AS A SET ONLY
INCLUDES [374], [S512] & [S515]; INCLUDES 3/4" WIDE CHAIN;
USE AS A SET ONLY
62 LINKS 7/8" WIDE
62 LINKS 3/4" WIDE
46 TEETH USE W/3/4" WIDE CHAIN
23 TEETH USE W/7/8" WIDE CHAIN
23 TEETH USE W/3/4" WIDE CHAIN
KIA
Year
Line
1.5 (1493CC) DOHC
2001-02
1
1.8-5 (1839CC) DOHC
1995-97
6
2.5 (2500CC) DOHC
2001
11
1.6 (1594CC) DOHC
2003-05
2
2.0 (1998CC) DOHC
1995-02
7
2.7 (2656) DOHC
2002-12
12
1.6 (1597CC) SOHC
1994-95
3
2.0-1,2 (1998CC) SOHC
1995
8
3.5-1 (3497CC) DOHC
2002-06
13
1.6-3,4 (1597CC) DOHC
1995-97
4
2.4-S (2351CC) DOHC
2001-06
9
1.8-1 (1793CC) DOHC
1998-04
5
2.4 (2359CC) DOHC
2006-13
10
4 Cyl.
Engine
Line
No.
Part Title
Engine
4 Cyl. (Continued)
Year
Line
Part No
1.5 (1493CC) DOHC ENG - 2001-02 - 4 Cyl. - 75.5 MM Bore (RIO)
2
1.6 (1594CC) DOHC ENG - 2003-05 - 4 Cyl. - 78 MM Bore (RIO)
3
4
5
Belt
Idler
B-0318
BT214
Year
Line
137 TEETH INTERFERENCE ENGINE APPLICATION
137 TEETH INTERFERENCE ENGINE APPLICATION
1.6 (1597CC) SOHC ENG - 1994-95 - 4 Cyl. - 78 MM Bore (SEPHIA GS,LS,RS) MAZDA B6 ENG
Belt
Belt Tensioner
B-0185
BT164
107 TEETH
1.6-3,4 (1597CC) DOHC ENG - 1995-97 - 4 Cyl. - 78 MM Bore (SEPHIA) MAZDA B6ZE ENG
Belt
Belt Tensioner
Idler
B-0179
BT213
BT214
145 TEETH
TENSIONER
IDLER
1.8-1 (1793CC) DOHC ENG - 1998-04 - 4 Cyl. - 83 MM Bore (1998-01 SEPHIA) (2000-04 SPECTRA)
MAZDA ENG (NOT USED IN 1999)
Belt
150
B-0318
BT214
Engine
Description
1
Belt
Idler
6 Cyl.
B-0302
B-0302
1998-2001 154 TEETH SEPHIA
2000-2004 154 TEETH SPECTRA
KIA (Continued)
Line
No.
Part Title
Part No
Description
6
1.8-5 (1839CC) DOHC ENG - 1995-97 - 4 Cyl. - 83 MM Bore (SEPHIA GS,LS,RS) MAZDA ENG
7
2.0-3 (1998CC) DOHC ENG - 1995-02 - 4 Cyl. - 86 MM Bore (SPORTAGE) MAZDA ENG 16V
8
9
Belt
Belt Tensioner
Idler
Belt
Belt Tensioner
Idler
B-0179
BT213
BT214
B-0281
BT166
BT5444
168 TEETH
2.0-1,2 (1998CC) SOHC ENG - 1995 - 4 Cyl. - 86 MM Bore (SPORTAGE) MAZDA ENG 8V
Belt
Belt Tensioner
B-0264
BT166
108 TEETH
2.4-6,S (2351CC) DOHC ENG - 2001-06 - 4 Cyl. - 86.5 MM Bore OPTIMA, MAGENTIS (HYUNDAI
ENG.)
Belt
B-0313
B-0314
10
1995-1997 145 TEETH
TENSIONER
IDLER
175 TEETH TIMING BELT (INTERFERENCE ENGINE
APPLICATION)
2001-2006 65 TEETH BALANCE SHAFT BELT (INTERFERENCE
ENGINE APPLICATION)
2.4 (2359CC) DOHC ENG - 2006-13 - 4 Cyl. - 88.0 MM Bore
(FORTE,SORENTO,SPORTAGE,OPTIMA,MAGENTIS,RONDO) HYUNDAI 16V ELECTRIC/GAS ENG
INCLUDES TRUCKS
Timing Kit
3-900CS
3-900CSA
Chain
900C
900C
901C
901C
Cam Sprocket
Crank Sprocket
S926
S931
S933
Chain Tensioner
BT5557
BT5557
BT5559
BT5559
BT5560
BT5560
2006-2010 KIT INCLUDES [900C], [901C], [S926], [S931], [S933],
[BT5557], [BT5559], [BT5560], [BT5563], [BG5558], [BG5561]
OPTIMA, RONDO
2010-2011 KIT INCLUDES [900C], [901C], [S931], [S933],
[BT5557], [BT5559], [BT5560], [BT5563], [BG5558], [BG5561]
NOTE; DOES NOT INCLUDE CAM SPROCKET FORTE
2006-2011 90 LINKS TIMING CHAIN; FORTE, OPTIMA & RONDO.
EXC. 2011 OPTIMA & RONDO
2011-2012 90 LINKS TIMING CHAIN; SPORTAGE, SORENTO
W/MPI
2006-2011 37 LINKS OIL PUMP CHAIN; FORTE, OPTIMA &
RONDO. EXC. 2011 OPTIMA & RONDO
2011-2012 37 LINKS OIL PUMP CHAIN; SPORTAGE, SORENTO
W/MPI
2006-2010 54 TEETH EXHAUST; OPTIMA, RONDO
2006-2011 27 TEETH OUTER; FORTE, OPTIMA, RONDO; EXC.
2011 OPTIMA & RONDO
2006-2011 30 TEETH INNER; FORTE, OPTIMA, RONDO; EXC.
2011 OPTIMA & RONDO
2006-2011 RIGHT HAND UPPER; TIMING CHAIN PRIMARY
TENSIONER ARM; FORTE, OPTIMA, RONDO; EXC. 2011
OPTIMA & RONDO
2011-2012 RIGHT HAND UPPER PRIMARY; TIMING CHAIN
TENSIONER ARM; SPORTAGE & SORENTO W/MPI
2006-2011 RIGHT HAND UPPER; PRIMARY TIMING CHAIN
TENSIONER; FORTE, OPTIMA & RONDO; EXC. 2011 OPTIMA &
RONDO
2011-2012 RIGHT HAND UPPER; PRIMARY TIMING CHAIN
TENSIONER; SPORTAGE & SORENTO W/MPI
2006-2011 LEFT HAND LOWER; OIL PUMP CHAIN TENSIONER
ARM; FORTE, OPTIMA, RONDO. EXC. 2011 OPTIMA & RONDO
2011-2012 LEFT HAND LOWER; OIL PUMP CHAIN TENSIONER
ARM; SPORTAGE
Continued on Next Page
151
KIA (Continued)
Line
No.
10
Part Title
Part No
Description
2.4 (2359CC) DOHC ENG - 2006-13 - 4 Cyl. - 88.0 MM Bore
(FORTE,SORENTO,SPORTAGE,OPTIMA,MAGENTIS,RONDO) HYUNDAI 16V ELECTRIC/GAS ENG
INCLUDES TRUCKS (Continued)
BT5563
Chain Tensioner
BT5563
BG5558
Chain Guide
BG5558
BG5561
BG5561
2006-2011 LEFT HAND LOWER; OIL PUMP CHAIN TENSIONER;
FORTE, OPTIMA & RONDO; EXC. 2011 OPTIMA & RONDO
2011-2012 LEFT HAND LOWER; OIL PUMP CHAIN TENSIONER;
SPORTAGE & SORENTO W/MPI
2006-2011 LEFT UPPER PRIMARY; TIMING CHAIN GUIDE;
FORTE, OPTIMA & RONDO; EXC. 2011 OPTIMA & RONDO
2011-2012 LEFT UPPER PRIMARY; TIMING CHAIN GUIDE;
SPORTAGE & SORENTO W/MPI
2006-2011 RIGHT HAND LOWER OIL PUMP CHAIN GUIDE;
FORTE, OPTIMA & RONDO; EXC. 2011 OPTIMA & RONDO
2011-2012 RIGHT HAND LOWER OIL PUMP CHAIN GUIDE;
SPORTAGE
11
2.5 (2500CC) DOHC ENG - 2001 - 6 Cyl. - 80 MM Bore (OPTIMA,MAGENTIS) HYUNDAI ENG
12
2.7 (2656) DOHC ENG - 2002-12 - 6 Cyl. - 86.7 MM Bore (MAGENTIS,OPTIMA,RONDO,SPORTAGE)
24V G6BA/G6A5 HYUNDAI ENG.
13
B-0315
Belt
B-0315
Belt
207 TEETH INTERFERENCE ENGINE APPLICATION
2002-2006 207 TEETH INTERFERENCE ENGINE APPLICATION
3.5-1 (3497CC) DOHC ENG - 2002-06 - 6 Cyl. - 93 MM Bore (2004-06 AMANTI) (2002-05 SEDONA)
(2003-06 SORENTO) HYUNDAI ENG
Belt
B-0323
Belt Tensioner
Idler
BT271
BT227
259 TEETH CAMSHAFT BELT; INTERFERENCE ENG.
APPLICATION
FRONT; CAMSHAFT BELT TENSIONER PULLEY
LEFT HAND; CAMSHAFT BELT IDLER PULLEY
LEXUS
4 Cyl.
Engine
2.4 (2362CC) DOHC
6 Cyl.
Year
Line
2010-12
1
2.5-V (2508CC) DOHC
1990-91
2
3.0-V (2959CC) DOHC
1992-93
3
Line
No.
Part Title
Engine
Year
Line
3.0 (2959,2995CC) DOHC
1994-03
4
3.0-J,D (2997CC) DOHC
1992-05
5
6 Cyl. (Continued)
ENG
Part No
8 Cyl.
Engine
Year
Line
4.0-U,H (3969CC) DOHC
1990-00
6
4.3-N (4293CC) DOHC
2001-10
7
4.7 (4663CC) DOHC
1998-09
8
Description
1
2.4 (2362CC) DOHC ENG - 2010-12 - 4 Cyl. - 88.5 MM Bore (HS250H) 16V (2AZFXE) ELECTRIC/GAS
2
2.5-V (2508CC) DOHC ENG - 1990-91 - V6 - 87.4 MM Bore (ES250) (2VZFE)
3
3.0-V (2959CC) DOHC ENG - 1992-93 - V6 - 87.5 MM Bore (1992-93 ES300) (3VZFE)
4
5
Timing Kit
Belt
Belt
B-0157
B-0200
SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(1)
TENSIONER,(3) GUIDES,(1) CAM SPROCKET,(1) CRANK
SPROCKET, (1) OIL PUMP SPROCKET, (1) SEAL, (1) GASKET
179 TEETH
191 TEETH
3.0 (2959,2995CC) DOHC ENG - 1994-03 - V6 - 87.5 MM Bore (1994-95 ES300 2995CC) (1996-98
ES300 2959CC) (1999-03 ES300,RX300 2995CC) (1MZFE)
Belt
B-0257
211 TEETH
3.0-J,D (2997CC) DOHC ENG - 1992-05 - 6 Cyl. - 86 MM Bore (1993-05 GS300) (2001-05 IS300)
(1992-00 SC300) (2JZGE)
Belt
152
3-752S
B-0215
143 TEETH CAMSHAFT BELT
LEXUS (Continued)
Line
No.
6
Part Title
Part No
4.0-U,H (3969CC) DOHC ENG - 1990-00 - V8 - 87.5 MM Bore (GS400, LS400, SC400) (1UZFE)
B-0190
B-0298
BT5525
BT6003
BT5259
Belt
Belt Tensioner
7
Idler
1990-1997 209 TEETH
1998-2000 211 TEETH INTERFERENCE ENGINE
TENSIONER PULLEY
TENSIONER
BELT IDLER
4.3-N (4293CC) DOHC ENG - 2001-10 - 8 Cyl. - 91 MM Bore (2001-07 GS430, 2001-06 LS430)
(2002-10 SC430) (3UZFE)
B-0298
BT5525
BT6003
BT5259
Belt
Belt Tensioner
8
Description
Idler
211 TEETH INTERFERENCE ENGINE
TENSIONER PULLEY
TENSIONER
BELT IDLER
4.7 (4663CC) DOHC ENG - 1998-09 - V8 - 94 MM Bore (1998-07 LX470) (2003-09 GX470) (2UZFE)
B-0298
BT5525
BT6003
BT5259
Belt
Belt Tensioner
Idler
211 TEETH INTERFERENCE ENGINE
TENSIONER PULLEY
TENSIONER
BELT IDLER
MAZDA
Engine
1146CC (12A)
4 Cyl.
Year
Line
1970-85
1
Engine
Year
Line
1796CC (OHC)
1977-78
12
1839CC (DOHC)
1990-05
13
1990-94
14
1992-95
15
4 Cyl. (Continued)
1169CC (OHV)
1970-71
2
1839CC (SOHC)
1272CC (SOHC)
1976-78
3
6 Cyl.
2 Cyl.
1845CC (DOHC)
1308CC ENG.
4 Cyl.
Engine
Year
Line
2260CC (DOHC)
2003-13
24
2300CC (DOHC)
2002-10
25
2492CC (SOHC)
1998-01
26
1993-01
27
4 Cyl. (Continued)
6 Cyl.
2497CC (DOHC)
4 Cyl.
1984-91
4
1970CC (OHC)
1979-84
16
2555CC (OHC)
1987-88
28
1415CC (OHC)
1979-80
5
1991CC (DOHC)
1993-02
17
2606CC (OHC)
1989-94
29
1489CC (DOHC)
1995-98
6
1998CC (OHC)
1984-87
18
6 Cyl.
4 Cyl.
1490CC (OHC)
1981-85
7
1998CC DIESEL
1984-85
19
3.0 (2954CC) DOHC
2001-11
30
1586CC (SOHC)
1971-76
8
2000CC (DOHC)
2001-03
20
2954CC (DOHC)
1990-95
31
1589CC (DOHC)
1999-01
9
2000CC (DOHC)
2004-15
21
2954CC (OHV)
1994-08
32
1597CC (DOHC)
1988-95
10
2184CC (SOHC)
1988-92
22
2954CC (SOHC)
1988-98
33
1597CC (SOHC)
1986-94
11
2184CC (SOHC)
1987-93
23
4016CC (OHV)
1991-00
34
Line
No.
Part Title
Part No
Description
1
1146CC (12A) ENG - 1970-85 (ROTARY ENG. MODEL R100, RX-2, RX-3, RX7)
2
1169CC (OHV) ENG - 1970-71 - 4 Cyl. - 70 MM Bore (1200)
Chain
Chain
8MMSR54
172
3SR94
54 LINKS OIL PUMP
46 LINKS OIL PUMP
94 LINKS CAMSHAFT
3
1272CC (SOHC) ENG - 1976-78 - 4 Cyl. - 73 MM Bore (GLC,MIZER)
4
1308CC ENG - 1984-91 - 2 Cyl. (RX-7 1984-91) R BLOCK
5
Chain
Chain Tensioner
Chain Guide
Chain
3SR44
BT47
BG86
8MMSR58
44 LINKS OIL PUMP
1976-1978 RIGHT
58 LINKS OIL PUMP CHAIN
1415CC (OHC) ENG - 1979-80 - 4 Cyl. - 78 MM Bore (GLC)
Chain
Cam Sprocket
Chain Tensioner
3DR90
3SR44
S540
BT47
90 LINKS CAMSHAFT
44 LINKS OIL PUMP
36 TEETH
153
MAZDA (Continued)
Line
No.
Part Title
Part No
Description
6
1489CC (DOHC) ENG - 1995-98 - 4 Cyl. - 75 MM Bore (PROTEGE')
7
1490CC (OHC) ENG - 1981-85 - 4 Cyl. - 78 MM Bore (GLC SEDAN,HATCHBACK)
Belt
Belt Tensioner
Idler
Chain
Crank Sprocket
8
Damper
Chain Guide
Chain
Chain Tensioner
Damper
Chain Guide
10
11
12
Belt
Belt Tensioner
Idler
172
3DR100
S450
S449
S451
S451
BT17
BT46
BD83
BG85
BG87
BG88
46 LINKS OIL PUMP
1974-1976 100 LINKS CAMSHAFT
1974-1976 38 TEETH
1974-1976 19 TEETH INNER
1971-1973 19 TEETH INNER
1971-1976 19 TEETH OUTER
1971-1973 ADJUSTER FOR TENSIONER
1974-1976
1971-1976 LEFT
1971 To 5/73 RIGHT
From 5/74 TO 1976 RIGHT
From 6/73 To 4/74 RIGHT
B-0308
BT213
BT214
123 TEETH
1597CC (DOHC) ENG - 1988-95 - 4 Cyl. - 78 MM Bore (1988-89 323 TURBO) (1990-93 MX-5 MIATA)
(1994-95 MX-3)
Belt
Belt Tensioner
Idler
B-0179
BT213
BT214
1990-1995 145 TEETH
1597CC (SOHC) ENG - 1986-94 - 4 Cyl. - 78.0 MM Bore (323) 8V
Belt
Belt Tensioner
B-0123
B-0141
B-0185
BT164
From 1/1/86 To 9/1/86 107 TEETH
From 9/1/86 To 2/7/89 107 TEETH
From 2/7/89 TO 1994 107 TEETH
1796CC (OHC) ENG - 1977-78 - 4 Cyl. - 78 MM Bore (B1800 1977-78)
Chain
Chain Tensioner
Damper
172
3DR106
S456
S449
S451
BT46
BD40
BD74
46 LINKS OIL PUMP
106 LINKS CAMSHAFT
38 TEETH
1977-1978 19 TEETH INNER
1977-1978 19 TEETH OUTER
1977-1978 RIGHT
1977-1978 LEFT
1839CC (DOHC) ENG - 1990-05 - 4 Cyl. - 83 MM Bore (1990-00 PROTEGE') (1994-05 MIATA, MX5)
(NOTE: MIATA NOT MADE IN 1998)
Belt
Belt Tensioner
Idler
154
90 LINKS CAMSHAFT
52 LINKS OIL PUMP
1981-1985 18 TEETH INNER
1981-1985 21 TEETH OUTER
1981-1985 LEFT HAND
1589CC (DOHC) ENG - 1999-01 - 4 Cyl. - (PROTEGE')
Cam Sprocket
Crank Sprocket
13
3DR90
8MMSR52
S543
S545
BD81
BG80
1995-1997 125 TEETH
BELT
1995-1997 LOWER
1586CC (SOHC) ENG - 1971-76 - 4 Cyl. - 78.0 MM Bore (1971-72 616, 1972-74 808 & 1972-76 B1600)
Cam Sprocket
Crank Sprocket
9
B-0266
BT213
BT214
B-0179
BT213
BT214
145 TEETH EXCLUDES 1999-00 PROTEGE
EXC. 1999-00 PROTEGE
EXC. 1999-00 PROTEGE
MAZDA (Continued)
Line
No.
Part Title
Part No
Description
14
1839CC (SOHC) ENG - 1990-94 - 4 Cyl. - 83 MM Bore (PROTEGE')
15
1845CC (DOHC) ENG - 1992-95 - V6 - 74.9 MM Bore (MX-3)
Belt
Belt Tensioner
Belt
Belt Tensioner
Idler
16
B-0185
BT164
B-0214
BT129
BT324
BT128
BT325
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Damper
18
19
20
21
192 TEETH
TENSIONER W/ARM
TENSIONER W/O ARM
1992-1995 LOWER
1992-1995 UPPER
1970CC (OHC) ENG - 1979-84 - 4 Cyl. - 80 MM Bore (1979-82 626) (1979-84 B2000)
3DR106-2
3DR106-3
17
107 TEETH CAMSHAFT BELT
CAMSHAFT BELT TENSIONER
Chain Guide
172
3DR106
8MMSR54
S456
S449
S451
S453
BT47
BD40
BD74
BG77
From 8/81 TO 1984 KIT INCLUDES [3DR106], [8MMSR54],
[S449], [S456], [S537], [S453], [BT47], [BD74] & [BG77]
1979 To 1/80 KIT INCLUDES [3DR106], [172], [S456], [S449],
[S451], [BT47], [BD40] & [BD74]
1979-1980 46 LINKS OIL PUMP
106 LINKS CAMSHAFT
1981-1984 54 LINKS OIL PUMP
38 TEETH
1979-1984 19 TEETH INNER
1979-1980 19 TEETH OUTER
1981-1984 19 TEETH OUTER
1979 To 1/80 RIGHT
1979-1984 LEFT
From 8/81 TO 1984 RIGHT
1991CC (DOHC) ENG - 1993-02 - 4 Cyl. - 83 MM Bore (626, MX-6)
Belt
B-0228
135 TEETH
1998CC (OHC) ENG - 1984-87 - 4 Cyl. - 86 MM Bore (1984-87 626) (1985-87 B2000)
Belt
Belt Tensioner
B-0113
B-0113
B-0117
B-0117
B-088
BT117
1985 109 TEETH 626
1986 109 TEETH B2000
1986-1987 109 TEETH 626
1987 109 TEETH B2000
1984 109 TEETH 626
1998CC DIESEL ENG - 1984-85 - 4 Cyl. - 86 MM Bore (626)
Belt
B-0103
1984-1985 148 TEETH FRONT
2000CC (DOHC) ENG - 2001-03 - 4 Cyl. - 84.8 MM Bore PROTEGE 2001-03)
Belt
B-0228
135 TEETH
2000CC (DOHC) ENG - 2004-15 - 4 Cyl. - 87.5 MM Bore (MAZDA 3, 3 SPORT, MX-5, MIATA MX-5)
DURATEC
Timing Kit
3-727S
Chain
706F
727F
Cam Sprocket
Crank Sprocket
Oil Pump Sprocket
Chain Tensioner
S898
S891
S893
BT452
2004-2011 INCLUDES [727F], [706F], (2) [S898], [S891], [S893],
[BT452], [BT5514], [BT5555], [BG449], [BG5556] EXC.2011 MX-5,
MX-5 MIATA
2004-2011 54 LINKS OIL PUMP CHAIN; EXC.2011 MX-5, MX-5
MIATA
2004-2011 134 LINKS TIMING CHAIN; EXC.2011 MX-5, MX-5
MIATA
2004-2011 2 REQ.; EXC.2011 MX-5, MX-5 MIATA
2004-2011 EXC.2011 MX-5, MX-5 MIATA
2004-2011 24 TEETH EXC.2011 MX-5, MX-5 MIATA
2004-2011 OIL PUMP CHAIN TENSIONER; EXC.2011 MX-5, MX-5
MIATA
Continued on Next Page
155
MAZDA (Continued)
Line
No.
21
Part Title
Part No
2000CC (DOHC) ENG - 2004-15 - 4 Cyl. - 87.5 MM Bore (MAZDA 3, 3 SPORT, MX-5, MIATA MX-5)
DURATEC (Continued)
Chain Tensioner
BT5514
BT5555
Chain Guide
BG449
BG5556
22
23
24
Belt
Belt Tensioner
Idler
B-0134
BT166
BT215
Belt
Belt Tensioner
Idler
B-0134
BT166
BT215
110 TEETH
2260CC (DOHC) ENG - 2003-13 - 4 Cyl. - 87.4 MM Bore (MAZDA 3,MAZDA 5,MAZDA 6,CX7)
INCLUDES TURBOCHARGED
Chain Tensioner
Chain Guide
3-0250S
BT5514
BG5515
2003 TO 09/2006 SOLD AS KIT ONLY; KIT INCLUDES (2)
CHAINS,(1) TENSIONER,(4) GUIDES,(1) CAM SPROCKET,(1)
CRANK SPROCKET,(1) OIL PUMP SPROCKET MAZDA 3, MAZDA
6; EXCLUDES VVT
2006-2007 SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(1)
TENSIONER,(4) GUIDES,(1) CAM SPROCKET,(1) CRANK
SPROCKET,(1) OIL PUMP SPROCKET MAZDA 5; EXCLUDES VVT
2003 TO 09/2006 MAZDA 3, MAZDA 6; EXCLUDES VVT
2003 TO 09/2006 MAZDA 3, MAZDA 6; EXCLUDES VVT
2300CC (DOHC) ENG - 2002-10 - 4 Cyl. - 87.4 MM Bore (B2300,TRIBUTE) GAS/ELECTRIC-GAS
DURATEC FORD ENGINE
Timing Kit
3-705S
3-705SX
Chain
Cam Sprocket
Crank Sprocket
Oil Pump Sprocket
Chain Tensioner
Chain Guide
156
110 TEETH
2184CC (SOHC) ENG - 1987-1993 - 4 Cyl. - 86.0 MM Bore B2200 (8V NON TURBOCHARGED ENG)
3-0250S
26
2004-2011 TIMING CHAIN TENSIONER; RIGHT UPPER;
EXC.2011 MX-5, MX-5 MIATA
2004-2011 TIMING CHAIN TENSIONER ARM; EXC.2011 MX-5,
MX-5 MIATA
2004-2011 OIL PUMP CHAIN GUIDE; EXC.2011 MX-5, MX-5
MIATA
2004-2011 TIMING CHAIN GUIDE; LEFT UPPER; EXC.2011 MX-5,
MX-5 MIATA
2184CC (SOHC) ENG - 1988-92 - 4 Cyl. - 86.0 MM Bore 626 & MX-6 (12 VALVE INCLUDES
TURBOCHARGED)
Timing Kit
25
Description
705
706F
S898
S891
S893
BT452
BT5513
BT5514
BG449
BG5515
2002-2009 KIT INCLUDES [705], [706F], (2) [S898], [S891],
[S893], [BT5513], [BT5514], [BT452], [BG449], [BG5515] (KIT
INCLUDES OIL PUMP CHAIN GUIDE) RWD B2300 ONLY;
NORTH/SOUTH CONFIGURATION 8MM PITCH; NON-VVT
KIT INCLUDES [705], [706F], [BT5513], [BT5514], [BT452],
[BG449], [BG5515] (KIT INCLUDES OIL PUMP CHAIN GUIDE,
DOES NOT INCLUDE SPROCKETS) RWD B2300 ONLY;
NORTH/SOUTH CONFIGURATION 8MM PITCH; NON-VVT
2002-2009 138 LINKS B2300; TIMING CHAIN
2002-2009 54 LINKS B2300; OIL PUMP CHAIN
2002-2009 B2300; 2 REQ.
2002-2009 B2300
2002-2009 24 TEETH B2300
2002-2009 B2300; OIL PUMP CHAIN TENSIONER
2002-2009 B2300; PRIMARY CHAIN TENSIONER ARM
2002-2009 B2300; PRIMARY CHAIN TENSIONER; RIGHT UPPER
2002-2009 B2300; OIL PUMP CHAIN GUIDE
2002-2009 B2300; PRIMARY CHAIN GUIDE
2492CC (SOHC) ENG - 1998-01 - 4 Cyl. - 3.779 Bore (B2500 PICK-UP)
Belt
B-0276
131 TEETH
MAZDA (Continued)
Line
No.
27
Part Title
Idler
B-0214
BT129
BT324
BT128
BT325
Timing Kit
3-102S
8MMSR90-1
Balance Shaft Elim. Kit
BSEK122
Chain
3DR102
8MMSR90
S458
S407
S455
S567
BT49
BD30
BD31
BG48
BG51
BG64
Cam Sprocket
Crank Sprocket
Balance Shaft Sprocket
Chain Tensioner
Chain Guide
KIT INCLUDES [3DR102-2] CAMSHAFT KIT & [8MMSR90-1]
BALANCE SHAFT KIT
KIT INCLUDES [3DR102], [S458], [S455], [BD31], [BD30] & [BT49]
(CAMSHAFT KIT)
KIT INCLUDES [8MMSR90], [S407], [S567] (2), [BG48], [BG64] &
[BG51] (BALANCE SHAFT KIT)
KIT INCLUDES CHAIN, OIL PUMP SHAFT PLUG, OIL GALLEY
PLUG, OIL PUMP MOUNTING GASKET AND INSTRUCTION
SHEET
102 LINKS CAMSHAFT
90 LINKS BAL. SHAFT
38 TEETH
34 TEETH OUTER
19 TEETH INNER
17 TEETH (2) REQ.
SLEEVE
CAMSHAFT; TENSION SIDE
CAMSHAFT; SLACK SIDE
BALANCE SHAFT; LEFT HAND
BALANCE SHAFT; LOWER RIGHT
BALANCE SHAFT; RIGHT HAND
2606CC (OHC) ENG - 1989-94 - 4 Cyl. - 92 MM Bore (1989-93 B2600 PICK-UP) (1989-94 MPV)
Chain
Chain Tensioner
Chain Guide
30
192 TEETH
ARM
1993-1997 TENSIONER
LOWER
UPPER
2555CC (OHC) ENG - 1987-88 - 4 Cyl. - 91.1 MM Bore (B2600 W/MITSUBISHI ENG.)
3DR102-2
29
Description
2497CC (DOHC) ENG - 1993-01 - V6 - 84.5 MM Bore (MX-6 1993-97)(626 1993-99)(MILLENIA
1995-01)
Belt
Belt Tensioner
28
Part No
3SR102
8MMSR84
BT168
BG169
BG170
BG171
BG172
BG173
102 LINKS CAMSHAFT
84 LINKS BAL. SHAFT
TENSION SIDE
SLACK SIDE
BAL. SHAFT LOWER RIGHT
BAL. SHAFT LOWER LEFT
1989-1994 BAL. SHAFT GUIDE UPPER- EXC. B2600
3.0 (2954CC) DOHC ENG - 2001-11 - 6 Cyl. - 89.0 MM Bore (MAZDA 6, MPV, TRIBUTE) FORD
DURATEC
Timing Kit
3-708S
3-708S
3-708SA
Chain
Crank Sprocket
Chain Tensioner
708
S929
BT5549
BT5550
2001-2006 KIT INCLUDES (2) [708], [S929], (2) [BT5549], (2)
[BT5550], [BG5551], [BG5552] (NOTE: CAMSHAFT SPROCKETS
ARE INTEGRATED ONTO THE CAMSHAFTS) EXC. MAZDA 6
2008-2009 KIT INCLUDES (2) [708], [S929], (2) [BT5549], (2)
[BT5550], [BG5551], [BG5552] (NOTE: CAMSHAFT SPROCKETS
ARE INTEGRATED ONTO THE CAMSHAFTS) EXC. MAZDA 6
2003-2008 INCLUDES (2) [708], [S929], (2) [BT5549], (2) [BT5550],
(2) [BG5553] (NOTE: VVT CAM SPROCKETS ARE NOT
INCLUDED) MAZDA 6 W/ VVT ENG.
2001-2009 144 LINKS TIMING CHAIN; 2 REQ.
2001-2009 21 TEETH
2001-2009 TIMING CHAIN TENSIONER; 2 REQ.
2001-2009 TIMING CHAIN TENSIONER ARM; 2 REQ.
Continued on Next Page
157
MAZDA (Continued)
Line
No.
30
Part Title
Part No
Description
3.0 (2954CC) DOHC ENG - 2001-11 - 6 Cyl. - 89.0 MM Bore (MAZDA 6, MPV, TRIBUTE) FORD
DURATEC (Continued)
Chain Guide
BG5551
BG5552
BG5553
2001-2009 TIMING CHAIN GUIDE; LEFT HAND; EXC. VVT
ENGINE
2001-2009 TIMING CHAIN GUIDE; RIGHT HAND; EXC. VVT
ENGINE
2003-2008 MAZDA 6; 2 REQ.; REPLACEMENT LINING FOR THE
R.H & L.H. TIMING CHAIN GUIDES LOCATED IN THE VVT
HOUSING ASSEMBLY; LINING ONLY DOES NOT INCLUDE
GUIDE ASSEMBLY
31
2954CC (DOHC) ENG - 1990-95 - V6 - 90 MM Bore (929 & 929S)
32
2954CC (OHV) ENG - 1994-08 - V6 - 90 MM Bore (B3000 PICK-UP) VULCAN
Belt
Idler
3pc Set
Chain
Cam Sprocket
Crank Sprocket
B-0183
BT5222
BT5223
BT5292
3-374S
3-396S
374
396
S636
S856
S649
S859
1990-1994 239 TEETH
1990-1995 L.H.
1990-1995 UPPER
1990-1995 R.H.
1998 INCLUDES [374], [S636] & [S649]
1999-2004 INCLUDES [396], [S859], [S856]
1994-1998 62 LINKS
1999-2004 62 LINKS
1994-1998 38 TEETH
1999-2004 38 TEETH
1994-1998 19 TEETH
1999-2004 19 TEETH
33
2954CC (SOHC) ENG - 1988-98 - V6 - 90.0 MM Bore (1988-91 929) (1989-98 MPV)
34
4.0-X (4016CC) OHV ENG - 1991-00 - V6 - 100.4 MM Bore (1991-94 NAVAJO) (1994-00 B4000
PICK-UP) FORD ENG.
Belt
Idler
Timing Kit
B-0146
BT216
BT293
3-3SRH64AS
3-3SRH64S
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
35
Chain Guide
1995-2000 KIT INCLUDES [3SRH64], [S650], [S821], [BT345],
[BG261]
1991-1994 KIT INCLUDES [3SRH64], [S650], [S651], [BT157] &
[BG261]
1991-1994 INCLUDES [3SRH64], [S650] & [S651]
1995-2000 INCLUDES [3SRH64], [S650] & [S821]
64 LINKS
38 TEETH
1991-1994 19 TEETH
1995-2000 19 TEETH
1991-1994
1995-2000
4.0-E (4016CC) SOHC ENG - 2001-10 - 6 Cyl. - 100.4 MM Bore (B4000) FORD ENGINE
Timing Kit
Continued on Next Page
158
3-3SRH64
3-3SRH64A
3SRH64
S650
S651
S821
BT157
BT345
BG261
173 TEETH CAMSHAFT BELT
1988-1998 LEFT HAND; 2 REQ.
1988-1998 RIGHT HAND
3-398S
2003-2009 KIT INCLUDES (3) TIMING CHAINS, (1) B. SHAFT
CHAIN, (2) CAM SPROCKETS, (2) JACKSHAFT SPROCKETS, (3)
TENSIONERS, (1) TENSIONER RESERVOIR, (3) GUIDES, (2)
WASHERS. SOLD AS KIT ONLY; ENTIRE KIT MUST BE
REPLACED DUE TO OE UPGRADES TO THE COMPONENTS.
A.W.D OR 4.W.D. ONLY; ENGINES WITH BALANCE SHAFT
MAZDA (Continued)
Line
No.
35
Part Title
Part No
Description
4.0-E (4016CC) SOHC ENG - 2001-10 - 6 Cyl. - 100.4 MM Bore (B4000) FORD ENGINE (Continued)
Timing Kit
3-398SA
Balance Shaft Sprocket
S875
2003-2009 KIT INCLUDES (3) TIMING CHAINS, (2) CAM
SPROCKETS, (2) JACKSHAFT SPROCKETS, (2) TENSIONERS,
(6) GUIDES, (2) WASHERS. SOLD AS KIT ONLY; ENTIRE KIT
MUST BE REPLACED DUE TO OE UPGRADES TO THE
COMPONENTS. R.W.D. ONLY; ENGINES W/OUT BALANCE
SHAFT
2001-2009 21 TEETH
MERCEDES BENZ
Year
Line
1.9 (1897CC) SOHC
1955-62
1
2.0 (1988CC) SOHC
1967-68
2
4 Cyl.
Engine
6 Cyl.
Engine
2.2 (2195CC) SOHC
4 Cyl.
2.2 (2197CC) SOHC
Line
No.
Part Title
Year
Line
1951-66
3
1968-73
Engine
4 Cyl. (Continued)
2.3 (2307CC) SOHC
6 Cyl.
4
Part No
3.0 (2996CC) SOHC
Year
Line
1974-78
5
1954-59
6
Description
1
1.9 (1897CC) SOHC ENG - 1955-62 - 4 Cyl. - 85 MM Bore (180, 180A, 180B, 190, 190B, 190C, 190SL)
2
2.0 (1988CC) SOHC ENG - 1967-68 - 4 Cyl. - 87 MM Bore (200)
3
2.2 (2195CC) SOHC ENG - 1951-66 - 6 Cyl. - 80 MM Bore (219,220,220A,220B,220S,220SB,220SE)
4
2.2 (2197CC) SOHC ENG - 1968-73 - 4 Cyl. - 87 MM Bore (220 & 220D)
5
2.3 (2307CC) SOHC ENG - 1974-78 - 4 Cyl. - 94 MM Bore (230)
6
3.0 (2996CC) SOHC ENG - 1954-59 - 6 Cyl. - 85 MM Bore (300SL)
Chain
Chain
Chain
Chain
Chain
Chain
3DR128
3DR128
3DR130
3DR136
3DR122
3DR122
3DR122
3DR122
3DR132
3DR130
3DR136
3DR130
3DR136
128 LINKS 180A, 180B, 190, 190B
1955-1961 128 LINKS 190SL
130 LINKS 200
136 LINKS 200D/8
1951-1960 122 LINKS 219
1951-1965 122 LINKS 220
1954-1965 122 LINKS 220S
1955-1957 122 LINKS 220A
1959-1966 132 LINKS 220SE
130 LINKS 220/8
136 LINKS 220D/8
130 LINKS
136 LINKS
159
MERCURY (INC. LINCOLN)
4 Cyl.
Engine
Year
Line
Engine
6 Cyl. (Continued)
Year
Line
Engine
8 Cyl. (Continued)
Year
Line
41
1.6-L (98) OHV
1971-72
1
3.0-U,2 (182) OHV
1986-05
23
4.6-8 (281) SOHC
2006-10
1.6 (98) OHC
1981-85
2
3.0-W,1 (183) SOHC
1993-98
24
289 OHV
1963-68
42
1.6 (98) SOHC
1987-89
3
3.3 (200)
1963-83
25
292
1961-62
43
1.6-6,Z (98)
1991-94
4
3.3-T (201)
1999-02
26
292
1955
44
1.8-8 DOHC
1991-96
5
5.0 (302)
1968-93
45
1.9-9 (116)
1985-87
6
8 Cyl.
5.0-P (302)
1997-01
46
1.9-J (116)
1991-96
7
312
1957-60
47
1.9-J (116)
1986-87
8
223
1961-62
28
5.4-L (330) SOHC
1998-99
48
2.0-P (121) SOHC
1997-99
9
3.8 (232) OHV
1982-97
29
5.4-5 (330) SOHC
2005-13
49
2.0-3 (121) DOHC
1995-02
10
5.4-A,R (330) DOHC
1999-04
50
2.0-H (122) DIESEL
1984-87
11
8 Cyl.
239
1939-51
30
351C ENG
1969-74
51
122 (2000) OHC
1971-74
12
239
1949-50
31
351M (MODIFIED)
1975-79
52
2.3 (2300) HSC
1984-94
13
5.8-H,M (351W)
1969-81
53
2.3 (140) SOHC
1975-86
14
6 Cyl.
2.3-H,Z (140) DOHC
2005-09
15
6 Cyl.
144
1960-63
4 Cyl.
2.5-D (153) HSC
1986
6 Cyl.
16
17
1962-63
6 Cyl.
1998-10
32
352
1961-62
54
4.1 (250)
1969-80
33
383
1958-59
55
390
1962-70
56
8 Cyl.
255
1949-53
34
400
1971-79
57
4.2 (255)
1980-82
35
406
1962-63
58
256
1954
36
410
1966-67
59
427 OHV
1963-69
60
428
1966-70
61
6 Cyl.
1995-02
170
1961-72
19
2.8-Z (171) OHV
1974-79
20
2.9 (177) OHV
1988-89
21
4.6 (281) DOHC INTECH
3.0-G,S,1 (182) DOHC
1996-11
22
4.6 (281) SOHC
Part Title
27
4.0-E (244) SOHC
2.5-G,L (155) DOHC
Line
No.
18
221
4.2-2 (256) OHV
8 Cyl.
260 OHV ENG
2004-07
37
429 OHV
1968-73
62
1962-65
38
430
1958-65
63
1993-05
39
460
1968-78
64
1991-11
40
462
1966-68
65
Part No
Description
1
1.6-L (98) OHV ENG - 1971-72 - 4 Cyl. - 3.19 Bore (CAPRI) 2737E ENG
2
1.6 (98) OHC ENG - 1981-85 - 4 Cyl. - 3.147 Bore (LYNX)
3
4
5
6
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Belt
Crank Sprocket
Belt Tensioner
Belt Guide
B-067
S419
BT92
BG95
INCLUDES [172], [S422] & [S423]
46 LINKS
34 TEETH
17 TEETH
97 TEETH
19 TEETH
1.6 (98) SOHC ENG - 1987-89 - 4 Cyl. - 3.147 Bore (TRACER)
Belt
Belt Tensioner
B-0141
BT164
107 TEETH
1.6-6,Z (98) ENG - 1991-94 - 4 Cyl. - 3.070 Bore (CAPRI) (CODE 6 T/C) (CODE Z NON T/C)
Belt
Belt Tensioner
Idler
B-0179
BT213
BT214
145 TEETH
1.8-8 DOHC ENG - 1991-96 - 4 Cyl. - 3.270 Bore (TRACER)
Belt
Belt Tensioner
Idler
B-0179
BT213
BT214
145 TEETH
1.9-9 (116) ENG - 1985-87 - 4 Cyl. - 3.230 Bore (1.9-9 2BC 1985-86) (1.9-9 CFI 1987)
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
Continued on Next Page
160
3-172S
172
S422
S423
B-067
S638
S419
BT92
97 TEETH
38 TEETH
19 TEETH
MERCURY (INC. LINCOLN) (Continued)
Line
No.
6
Part Title
Part No
Description
1.9-9 (116) ENG - 1985-87 - 4 Cyl. - 3.230 Bore (1.9-9 2BC 1985-86) (1.9-9 CFI 1987) (Continued)
Belt Guide
Timing Cover
BG95
MIC200
MOC200
1985-1987 INNER
1985-1987 OUTER
7
1.9-J (116) ENG - 1991-96 - 4 Cyl. - 3.230 Bore (SFI)
8
1.9-J (116) ENG - 1986-87 - 4 Cyl. - 3.230 Bore (EFI)
9
10
Belt
Belt Tensioner
Belt Guide
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
Belt Guide
Timing Cover
B-0194
BT350
BG95
B-067
S638
S419
BT92
BG95
MIC200
MOC200
97 TEETH
97 TEETH
38 TEETH
19 TEETH
INNER
OUTER
2.0-P (121) SOHC ENG - 1997-99 - 4 Cyl. - 3.34 Bore TRACER
Belt
Belt Tensioner
Belt Guide
B-0283
BT5406
BG95
99 TEETH
2.0-3 (121) DOHC ENG - 1995-02 - 4 Cyl. - 3.34 Bore (COUGAR, MYSTIQUE, - MFI)
Belt
Belt Tensioner
Idler
B-0258
B-0294
BT5390
BT5409
BT5410
1995-1997 131 TEETH
1998-2002 129 TEETH
1995-1997 MYSTIQUE; TENSIONER
1995-1997 LEFT HAND IDLER
1995-1997 RIGHT HAND IDLER
11
2.0-H (122) DIESEL ENG - 1984-87 - 4 Cyl. - 3.390 Bore
12
122 (2000) OHC ENG - 1971-74 - 4 Cyl. - 3.575 Bore
13
14
15
Belt
Belt
Cam Sprocket
Belt Tensioner
B-0103
B-013
S424
BT10
1984-1987 148 TEETH CAMSHAFT BELT; FRONT
122 TEETH CAMSHAFT BELT
38 TEETH
CAMSHAFT BELT TENSIONER
2.3 (2300) HSC ENG - 1984-94 - 4 Cyl. - 3.68 Bore (CODE R CARB 1984) (CODE S E.F.I. H.O. ENG
1985-91) (CODE X E.F.I. ENG 1985-94)
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-505SA
3-505S
505
S618
S617
BT127
KIT INCLUDES [505], [S617], [S618], [BT127]
INCLUDES [505], [S617] & [S618]
46 LINKS
36 TEETH
18 TEETH
2.3 (140) SOHC ENG - 1975-86 - 4 Cyl. - 3.78 Bore (CODE A 1980-86) (CODE W 1979 CARB. T/C &
1983-86 F.I. T/C) (CODE Y 1975-79) (CODE 6 LPG 1982-84)
Belt
Cam Sprocket
Crank Sprocket
Timing Cover
B-014
S446
S447
MIC100
129 TEETH
38 TEETH
19 TEETH
1975-1986 INNER
2.3-H,Z (140) DOHC ENG - 2005-09 - 4 Cyl. - 3.44 Bore (MARINER 05-08, MILAN 06-09) DURATEC
(VIN Z GAS, VIN H HYBRID)
Chain
705
705
Chain Tensioner
BT452
2005-2006 138 LINKS MARINER; PRIMARY TIMING CHAIN
From 12/3/2006 TO 2009 138 LINKS MILAN; PRIMARY TIMING
CHAIN
2005-2006 MARINER; OIL PUMP CHAIN
161
MERCURY (INC. LINCOLN) (Continued)
Line
No.
16
17
18
Part Title
20
21
22
Cam Thrust Plate
3pc Set
Chain
Cam Sprocket
Crank Sprocket
MF108
3-351S
351
S308
S397
INCLUDES [351], [S308] & [S397]
50 LINKS
38 TEETH
19 TEETH
2.5-D (153) HSC ENG - 1986 - 4 Cyl. - 3.70 Bore
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-505SA
3-505S
505
S618
S617
BT127
KIT INCLUDES [505], [S617], [S618], [BT127]
INCLUDES [505], [S617] & [S618]
46 LINKS
36 TEETH
18 TEETH
2.5-G,L (155) DOHC ENG - 1995-02 - V6 - 3.24 Bore (MFI)
Timing Kit
3-392S
Chain
Crank Sprocket
Chain Tensioner
392
S833
BT406
BT408A
BG409
BG410
1996-2000 KIT INCLUDES (2) [392], [S833], (2) [BT406], (2)
[BT408A], [BG409], [BG410] (NOTE: CAMSHAFT SPROCKETS
ARE INTEGRATED ONTO THE CAMSHAFTS)
61 LINKS 2 REQ.
18 TEETH
1996-2000 R.H. & L.H. HYDRAULIC TENSIONER; 2 REQ.
1996-2000 TENSIONER ARM; 2 REQ.
1996-2000 L.H.
1996-2000 R.H.
170 ENG - 1961-72 - 6 Cyl. - 3 1/2 Bore
Cam Thrust Plate
3pc Set
Chain
Cam Sprocket
Crank Sprocket
MF108
3-351S
351
S308
S397
INCLUDES [351], [S308] & [S397]
50 LINKS
38 TEETH
19 TEETH
2.8-Z (171) OHV ENG - 1974-79 - V6 - 3.661 Bore
Gear Set
2760SA
REPLACE AS A SET ONLY
2.9 (177) OHV ENG - 1988-89 - V6 - 3.66 Bore (MERKUR SCORPIO) FORD ENGINE
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
3-3SR60
3SR60
S650
S651
BT157
BG187
INCLUDES [3SR60], [S650] & [S651]
60 LINKS
38 TEETH
19 TEETH
3.0-G,S,1 (182) DOHC ENG - 1996-11 - V6 - 3.50 Bore
(LS,MILAN,MONTEGO,SABLE,ZEPHYR,MARINER) 24V DURATEC INCLUDES TRUCKS
Timing Kit
3-392S
3-708S
3-708SA
Continued on Next Page
162
Description
144 ENG - 1960-63 - 6 Cyl. - 3 1/2 Bore
Chain Guide
19
Part No
1996-2000 KIT INCLUDES (2) [392], [S833], (2) [BT406], (2)
[BT408A], [BG409], [BG410] (NOTE: CAMSHAFT SPROCKETS
ARE INTEGRATED ONTO THE CAMSHAFTS)
2001-2007 KIT INCLUDES (2) [708], [S929], (2) [BT5549], (2)
[BT5550], [BG5551], [BG5552] (NOTE: CAMSHAFT SPROCKETS
ARE INTEGRATED ONTO THE CAMSHAFTS) SABLE, MARINER,
MONTEGO
2006-2009 INCLUDES (2) [708], [S929], (2) [BT5549], (2) [BT5550],
(2) [BG5553] (NOTE: VVT CAM SPROCKETS ARE NOT
INCLUDED) MILAN & ZEPHYR; REPLACEMENT LINING FOR
THE R.H & L.H. TIMING CHAIN GUIDES LOCATED IN THE VVT
HOUSING ASSEMBLY; LINING ONLY DOES NOT INCLUDE
GUIDE ASSEMBLY
MERCURY (INC. LINCOLN) (Continued)
Line
No.
22
Part Title
Part No
3.0-G,S,1 (182) DOHC ENG - 1996-11 - V6 - 3.50 Bore
(LS,MILAN,MONTEGO,SABLE,ZEPHYR,MARINER) 24V DURATEC INCLUDES TRUCKS (Continued)
Timing Kit
3-708SA
Chain
392
708
S833
S929
BT406
BT408A
BT5549
BT5550
BG409
BG410
BG5551
BG5552
BG5553
Crank Sprocket
Chain Tensioner
Chain Guide
BG5553
23
3pc Set
Cam Sprocket
Crank Sprocket
25
26
2008 TO 12/10/08 INCLUDES (2) [708], [S929], (2) [BT5549], (2)
[BT5550], (2) [BG5553] (NOTE: VVT CAM SPROCKETS ARE NOT
INCLUDED) MARINER; REPLACEMENT LINING FOR THE R.H &
L.H. TIMING CHAIN GUIDES LOCATED IN THE VVT HOUSING
ASSEMBLY; LINING ONLY DOES NOT INCLUDE GUIDE
ASSEMBLY
1996-2000 61 LINKS 2 REQ.
2001-2007 144 LINKS 2 REQ.
2000 18 TEETH
2001-2007 21 TEETH
1996-2000 TIMING CHAIN TENSIONER; 2 REQ.
1996-2000 TIMING CHAIN TENSIONER ARM; 2 REQ.
2001-2007 TIMING CHAIN TENSIONER; 2 REQ.
2001-2007 TIMING CHAIN TENSIONER ARM; 2 REQ.
1996-2000 TIMING CHAIN GUIDE; LEFT HAND
1996-2000 TIMING CHAIN GUIDE; RIGHT HAND
2001-2007 TIMING CHAIN GUIDE; LEFT HAND
2001-2007 TIMING CHAIN GUIDE; RIGHT HAND
2006-2009 MILAN, ZEPHYR W/ VVT ENG.; 2 REQ.;
REPLACEMENT LINING FOR THE R.H & L.H. TIMING CHAIN
GUIDES LOCATED IN THE VVT HOUSING ASSEMBLY; LINING
ONLY DOES NOT INCLUDE GUIDE ASSEMBLY
2008 To 12/10/2008 MARINER W/VVT ENG.; 2 REQ.;
REPLACEMENT LINING FOR THE R.H & L.H. TIMING CHAIN
GUIDES LOCATED IN THE VVT HOUSING ASSEMBLY; LINING
ONLY DOES NOT INCLUDE GUIDE ASSEMBLY
3.0-U,2 (182) OHV ENG - 1986-05 - V6 - 3.500 Bore (GAS, FLEX FUEL)
Chain
24
Description
3-374S
3-396S
374
396
S636
S856
S649
S749
S859
INCLUDES [374], [S636] & [S649] 1986-98 EXC. 1992-94 TOPAZ
W/M.T.
1999-2003 INCLUDES [396], [S859], [S856]
1986-1998 62 LINKS
1999-2003 62 LINKS
1986-1998 38 TEETH
1999-2003 38 TEETH
19 TEETH 1986-98 EXC. 1992-94 TOPAZ W/M.T.
1992-1994 19 TEETH TOPAZ W/M.T.
1999-2003 19 TEETH
3.0-W,1 (183) SOHC ENG - 1993-98 - V6 - 3.42 Bore (VILLAGER) NISSAN ENG
Belt
Belt Tensioner
B-0104
B-0249
BT120
1993 133 TEETH CAMSHAFT BELT
1994-1998 133 TEETH CAMSHAFT BELT
3.3 (200) ENG - 1963-83 - 6 Cyl. - 3.68 Bore
Cam Thrust Plate
3pc Set
Chain
Cam Sprocket
Crank Sprocket
MF108
3-351S
351
S308
S397
INCLUDES [351], [S308] & [S397]
50 LINKS
38 TEETH
19 TEETH
3.3-T (201) ENG - 1999-02 - V6 - 3.60 Bore VILLAGER
Belt
Belt Tensioner
B-0249
BT120
133 TEETH CAMSHAFT BELT
CAMSHAFT BELT TENSIONER
163
MERCURY (INC. LINCOLN) (Continued)
Line
No.
Part Title
Part No
27
221 ENG - 1962-63 - 8 Cyl. - 3 1/2 Bore
28
223 ENG - 1961-62 - 6 Cyl. - 3 5/8 Bore
29
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-344S
344
S249
S250
INCLUDES [356], [S326] & [S327]
58 LINKS
42 TEETH
21 TEETH
INCLUDES [344], [S249] & [S250]
56 LINKS
42 TEETH
21 TEETH
3.8 (232) OHV ENG - 1982-97 - V6 - 3.81 Bore (VIN 3 1982-87) (VIN 4 1987-97) (VIN C 1984) (VIN R
SUPERCHARGED 1989-90)
3pc Set
Chain
Cam Button
Cam Sprocket
30
3-356S
356
S326
S327
Description
Crank Sprocket
Chain Tensioner
3-365SA
3-376S
365
376
CB200
S542
S700
S539
BT323
1982-1987 INCLUDES [365], [S542] & [S539]
1988-1997 INCLUDES [376], [S700] & [S539]
1982-1987 60 LINKS
1988-1997 60 LINKS
1982-1987
1982-1987 42 TEETH
1988-1997 42 TEETH
21 TEETH
From 5/10/89 TO 1997
239 ENG - 1939-51 - 8 Cyl. - 3 3/16 Bore
Cam Gear
4706
4706
1942 44 TEETH ALUMINUM
1946-1948 44 TEETH ALUMINUM
31
239 ENG - 1949-50 - 8 Cyl. - 3.19 Bore M-47 L-HEAD
32
4.0-E,K (244) SOHC ENG - 1998-10 - V6 - 3.95 Bore (MOUNTAINEER) (VIN E GAS) (VIN K FLEX
FUEL)
Gear Set
Cam Gear
Crank Gear
Timing Kit
2727S
2702
2701
3-398S
3-398SA
33
34
35
Balance Shaft Sprocket
2003-2010 KIT INCLUDES (3) TIMING CHAINS, (1) B. SHAFT
CHAIN, (2) CAM SPROCKETS, (2) JACKSHAFT SPROCKETS, (3)
TENSIONERS, (1) TENSIONER RESERVOIR, (3) GUIDES, (2)
WASHERS. SOLD AS KIT ONLY; ENTIRE KIT MUST BE
REPLACED DUE TO OE UPGRADES TO THE COMPONENTS.
A.W.D. OR 4.W.D. ONLY; ENGINES WITH BALANCE SHAFT
2003-2010 KIT INCLUDES (3) TIMING CHAINS, (2) CAM
SPROCKETS, (2) JACKSHAFT SPROCKETS, (2) TENSIONERS,
(6) GUIDES, (2) WASHERS. SOLD AS KIT ONLY; ENTIRE KIT
MUST BE REPLACED DUE TO OE UPGRADES TO THE
COMPONENTS. R.W.D. ONLY; ENGINES W/OUT BALANCE
SHAFT
1998-2003 21 TEETH
4.1 (250) ENG - 1969-80 - 6 Cyl. - 3.68 Bore
Cam Thrust Plate
MF108
255 ENG - 1949-53 - 8 Cyl. - 3.19 Bore
Gear Set
Cam Gear
Crank Gear
2727S
2702
2701
INCLUDES [2702] & [2701]
44 TEETH ALUM
22 TEETH CAST IRON
4.2 (255) ENG - 1980-82 - 8 Cyl. - 3.68 Bore
Cam Thrust Plate
3pc Set
Continued on Next Page
164
S875
INCLUDES [2702] & [2701]
44 TEETH ALUM
22 TEETH
MF125
3-358SA
INCLUDES [358], [S430] & [S431]
MERCURY (INC. LINCOLN) (Continued)
Line
No.
Part Title
Part No
Description
35
4.2 (255) ENG - 1980-82 - 8 Cyl. - 3.68 Bore (Continued)
36
256 ENG - 1954 - 8 Cyl. - 3.625 Bore
37
38
39
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
358
S430
S431
3-344S
344
S249
S250
58 LINKS
42 TEETH
21 TEETH
INCLUDES [344], [S249] & [S250]
56 LINKS
42 TEETH
21 TEETH
4.2-2 (256) OHV ENG - 2004-07 - 6 Cyl. - 3.81 Bore (MONTEREY) TRITON
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-376S
376
S700
S539
INCLUDES [376], [S700] & [S539]
60 LINKS
42 TEETH
21 TEETH
260 OHV ENG - 1962-65 - 8 Cyl. - 3.80 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-356S
356
S326
S327
INCLUDES [356], [S326] & [S327]
58 LINKS
42 TEETH
21 TEETH
4.6 (281) DOHC ENG - 1993-05 - V8 - 3.55 Bore INCLUDES TRUCKS (2003-05 AVIATOR, 1995-02
CONTINENTAL, 1993-98 MARK VIII, 2003-04 MARAUDER) INTECH
Timing Kit
3-387SGF
3-387SHF
3-387SJF
3-387SKF
Chain
Cam Thrust Plate Spacer
Cam Sprocket
189
387
S803SP
S764
S766
S790
S790P
Crank Sprocket
S843
S869
Chain Tensioner
5497B
BT402
1998-2000 REPLACES [3-387SF]; KIT INCLUDES (2) [387], (2)
[189], [S764], [S766], (4) [S790P], [S843], [BT402], [BT403],
[BT404], [BT405], [BD393], [BD394], [BG391], [BG392G] FITS ALL
MODELS
1993-1997 REPLACES [3-387SD] AND [3-387SE]; KIT INCLUDES
(2) [387], (2) [189], [S764], [S766, (4) [S790], [S843], [BT402],
[BT403], [BT404], [BT405], [BD393], [BD394], [BG391], [BG392G]
FITS ALL MODELS
2001-2002 KIT INCLUDES (2) [387], (2) [189], [S764], [S766], (4)
[S790P], [S869], [BT402], [BT403], [BT404], [BT405], [BD393],
[BD394], [BG391], [BG392G] CONTINENTAL ONLY
2003-2005 KIT INCLUDES (2) [387], (2) [189], [S764], [S766],
[S869], (4) [S790P], [BT404], [BT405], [BT429], [BT430], [BD393],
[BD394], [BG391G], [BG392G] 2003-04 MARAUDER; 2003-05
AVIATOR ONLY
44 LINKS SECONDARY; 2 REQ.
116 LINKS PRIMARY; 2 REQ.
42 TEETH LEFT HAND; PRIMARY
42 TEETH RIGHT HAND; PRIMARY
1993-1997 20 TEETH RIGHT HAND & LEFT HAND; SECONDARY;
4 REQ.
1998-2005 20 TEETH RIGHT HAND & LEFT HAND; SECONDARY
(4) REQ.; NOT INTERCHANGEABLE W/ S790
1993-2000 21 TEETH 1 PC. DESIGN
2001-2005 21 TEETH 1 PC. DESIGN W/ HUB; HUB ACTS AS A
SPACER
OE YR3Z-6K282-AA TENSIONER BOLT; 2 REQ.; MUST BE USED
W/ BD393 & BD394
1993-2002 LEFT HAND; PRIMARY; ADAPTER PLATE NOT
REQUIRED
Continued on Next Page
165
MERCURY (INC. LINCOLN) (Continued)
Line
No.
39
Part Title
Part No
4.6 (281) DOHC ENG - 1993-05 - V8 - 3.55 Bore INCLUDES TRUCKS (2003-05 AVIATOR, 1995-02
CONTINENTAL, 1993-98 MARK VIII, 2003-04 MARAUDER) INTECH (Continued)
Chain Tensioner
BT403
Damper
BT404
BT405
BT429
BT430
BD393
BD394
40
Chain Guide
BG391
BG391G
BG392G
Adaptor Plate
AP275
1993-2002 RIGHT HAND; PRIMARY; ADAPTER PLATE NOT
REQUIRED
LEFT HAND; SECONDARY TENSIONER
RIGHT HAND; SECONDARY TENSIONER
2003-2005 RIGHT HAND; PRIMARY
2003-2005 LEFT HAND; PRIMARY
LEFT HAND TENSIONER ARM; MUST USE W/ 5497B PIVOT
BOLT (NOT INCLUDED)
RIGHT HAND TENSIONER ARM; MUST USE W/ 5497B PIVOT
BOLT (NOT INCLUDED)
1993-2002 LEFT HAND
2003-2005 LEFT HAND; MOUNTING BOLTS NOT SUPPLIED
RIGHT HAND; TWO MOUNTING BOLTS NOT SUPPLIED;
REPLACES BG392
1993-1995 2 REQ.
4.6 (281) SOHC ENG - 1991-11 - V8 - 3.55 Bore (VIN W 1991-08 ROMEO ENG) (VIN 6 1996
WINDSOR ENG) (VIN V FLEX FUEL 2006-11) 16V
Timing Kit
3-387SA
3-387SAX
3-387SG
3-387SGX
3-387SIF
Chain
Cam Thrust Plate Spacer
Cam Sprocket
Crank Sprocket
Chain Tensioner
Continued on Next Page
166
Description
185
387
S802SP
S736
S740
S760
S762
S764
S766
S751
S791
S843
S869
BT402
1991-2000 REPLACES [3-387S] AND [3-387SB]; SILENT CHAIN
DOES NOT REQUIRE ADAPTER PLATES; KIT INCLUDES (2)
387, S766 R.H., S764 L.H., S843 (1PC), BT402 L.H., BT403 R.H.,
BD322 R.H., BD321 L.H., BG320 R.H., BG319 L.H (SILENT CHAIN
UPGRADE; WILL RETROFIT 1991-1992 ROLLER CHAIN
SYSTEM)
1991-2000 SILENT CHAIN UPGRADE; KIT INCLUDES (2) 387,
BT402 L.H., BT403 R.H., BD322 R.H., BD321 L.H., BG320 R.H.,
BG319 L.H., (2) AP275; NOTE: THIS KIT DOES NOT CONTAIN
SPROCKETS
2001 To 10/2002 KIT INCLUDES (2) [387], [S766], [S764], [S869],
[BG333], [BG334], [BD321], [BD322], [BT402], [BT403] (SILENT
CHAIN) (DOES NOT REQUIRE (2) ADAPTER PLATES)
FROM 10/2002 TO 2011 SILENT CHAIN; DOES NOT REQUIRE
(2) ADAPTER PLATES; KIT INCLUDES (2) [387], [BG333],
[BG334], [BD321], [BD322], [BT429], [BT430] (NOTE: DOES NOT
INCLUDE SPROCKETS) (2002-11 GRAND MARQUIS,TOWN
CAR) (2002-05 MOUNTAINEER)
From 10/2002 TO 2011 KIT INCLUDES (2) [387], [S766], [S764],
[S869], [BG333], [BG334], [BD321], [BD322], [BT429], [BT430]
(SILENT CHAIN) (DOES NOT REQUIRE (2) ADAPTER PLATES)
1992-1993 116 LINKS (2) REQ.; STANDARD CHAIN
1994-2011 116 LINKS (2) REQ. SILENT CHAIN
1994-2006
1992 42 TEETH LEFT HAND
1992 42 TEETH RIGHT HAND
1993 42 TEETH LEFT HAND
1993 42 TEETH RIGHT HAND
1994-2011 42 TEETH LEFT HAND
1994-2011 42 TEETH RIGHT HAND
1992 21 TEETH (2) REQ.
1993 21 TEETH (2) REQ.
1994-2000 21 TEETH (1 PC. DESIGN)
2001-2011 21 TEETH
1992 To 10/2002 LEFT HAND, ADAPTER PLATES NOT REQUIRED
MERCURY (INC. LINCOLN) (Continued)
Line
No.
40
Part Title
Damper
Chain Guide
Adaptor Plate
BT403
BT429
BT430
BD321
BD322
BG315
BG316
BG319
BG320
BG333
BG334
AP275
1992 To 10/2002 RIGHT HAND, ADAPTER PLATES NOT
REQUIRED AFTER 1995
From 10/2002 TO 2011 RIGHT HAND
From 10/2002 TO 2011 LEFT HAND
1992-2011 (ARM) LEFT HAND
1992-2011 (ARM) RIGHT HAND
1992 RIGHT HAND
1992 LEFT HAND
1993-2000 RIGHT HAND
1993-2000 LEFT HAND
2001-2011 RIGHT HAND; WINDSOR STYLE GUIDE
2001-2011 LEFT HAND; WINDSOR STYLE GUIDE
1992-1995 (2) REQ.
4.6-8 (281) SOHC ENG - 2006-2010 - 8 Cyl. - 3.55 Bore (MOUNTAINEER) 24V
Timing Kit
3-387SGX
Chain
Camshaft Sprocket
Actuator
Variable Cam Timing
Solenoid
Crank Sprocket
Chain Tensioner
387
VCTA-1000
Damper
Chain Guide
42
Description
4.6 (281) SOHC ENG - 1991-11 - V8 - 3.55 Bore (VIN W 1991-08 ROMEO ENG) (VIN 6 1996
WINDSOR ENG) (VIN V FLEX FUEL 2006-11) 16V (Continued)
Chain Tensioner
41
Part No
VCTS-1000
S869
BT429
BT430
BD321
BD322
BG333
BG334
SILENT CHAIN; DOES NOT REQUIRE (2) ADAPTER PLATES;
KIT INCLUDES (2) [387], [BG333], [BG334], [BD321], [BD322],
[BT429], [BT430] (NOTE: DOES NOT INCLUDE SPROCKETS)
116 LINKS 2 REQ.
MOUNTING BOLT INCLUDED 2 REQ.
MOUNTING BOLT AND INSTALLATION GASKET INCLUDED 2
REQ.
21 TEETH (TIMING MARK ON HUB)
RIGHT HAND
LEFT HAND
LEFT HAND; ARM
RIGHT HAND; ARM
RIGHT HAND
LEFT HAND
289 OHV ENG - 1963-68 - 8 Cyl. - 4.00 Bore
Cam Thrust Plate
3pc Set
MF125
3-356S
3-358S
Chain
Cam Sprocket
Crank Sprocket
356
358
S326
S406
S327
S431
1965-1968 AFTER CHG. L7
1964-1965 INCLUDES [356], [S326] & [S327] TO CHANGE L7;
W/17/32" TOOTH WIDTH
1965-1968 INCLUDES [358], [S406] & [S431] AFTER CHG. L7;
W/13/32" TOOTH WIDTH
1964-1965 58 LINKS TO CHANGE L7; W/17/32" TOOTH WIDTH
1965-1968 58 LINKS AFTER CHG. L7; W/13/32" TOOTH WIDTH
1964-1965 42 TEETH TO CHANGE L7; W/17/32" TOOTH WIDTH
1965-1968 42 TEETH AFTER CHG. L7; W/13/32" TOOTH WIDTH
1964-1965 21 TEETH TO CHANGE L7; W/17/32" TOOTH WIDTH
1965-1968 21 TEETH AFTER CHG. L7; W/13/32" TOOTH WIDTH
43
292 ENG - 1961-62 - 8 Cyl. - 3.75 Bore (COLONY PARK, COMMUTER, METEOR, MONTEREY)
44
292 ENG - 1955 - 8 Cyl. - 3.75 Bore (CUSTOM, MONTCLAIR, MONTEREY)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-344S
344
S249
S250
3-344S
344
S249
S250
INCLUDES [344], [S249] & [S250]
56 LINKS
42 TEETH
21 TEETH
INCLUDES [344], [S249] & [S250]
56 LINKS
42 TEETH
21 TEETH
167
MERCURY (INC. LINCOLN) (Continued)
Line
No.
45
Part Title
Part No
5.0 (302) ENG - 1968-93 - 8 Cyl. - 4.000 Bore
Cam Thrust Plate
MF125
MF126
3pc Set
3-163SA
3-163SB
3-163SB
3-358S
3-358SA
3-700SA
Chain
163
163
358
395
S406
S430
Cam Sprocket
S612
Crank Sprocket
46
Description
S612
S818
S431
S531
S531
S819
1968 To 3/21/84 W/O H.O.
From 3/21/84 TO 1993 NOTE: IF USING [3-163SB] SET OR
[S612] SPROCKET ON ENGINES BEFORE 3/21/84, YOU MUST
USE [MF126] (3.356"L) THRUST PLATE RATHER THAN [MF125]
OR STOCK (3.882"L) PLATE.
1984 To 3/21/84 INCLUDES [163], [S468] & [S531] W/H.O.
From 3/21/84 To 9/1/88 INCLUDES [163], [S612] & [S531] W/H.O.
From 9/1/88 TO 1993 INCLUDES [163], [S612] & [S531]
1968 To 5/2/72 INCLUDES [358], [S406] & [S431]
From 5/2/72 TO 1988 INCLUDES [358], [S430] & [S431] EXC. H.O.
1991-1993 INCLUDES [395], [S818], [S819] SILENT CHAIN - USE
AS SET ONLY (COUGAR)
1984 To 9/1/88 58 LINKS ROLLER CHAIN - W/H.O.
From 9/1/88 TO 1993 58 LINKS ROLLER CHAIN
1968 To 9/1/88 58 LINKS EXC. H.O. ENG.
1991-1993 58 LINKS COUGAR; SILENT CHAIN
1968 To 5/2/72 42 TEETH EXC. H.O. ENG.
1977-1988 42 TEETH TOWN CAR, CONTINENTAL, COUGAR,
MARK VII EXC. LSC
From 3/21/84 TO 1985 42 TEETH W/H.O.; USE W/163 CHAIN
ONLY
1990-1993 42 TEETH USE W/163 CHAIN ONLY
1991-1993 42 TEETH COUGAR; USE W/370 CHAIN ONLY
1968 To 9/1/88 21 TEETH W/O H.O.
1984-1989 21 TEETH W/H.O. ENG.
1989-1991 21 TEETH W/O H.O.; USE W/163 ROLLER CHAIN
1991-1993 21 TEETH COUGAR; USE W/370 CHAIN
5.0-P (302) ENG - 1997-01 - 8 Cyl. - 4.00 Bore (MOUNTAINEER)
3pc Set
3-163SB
Chain
163
Cam Sprocket
Crank Sprocket
395
S612
S818
S531
S819
1997-2000 INCLUDES [163], [S612] & [S531] USE AS COMPLETE
SET ONLY
1997-2000 58 LINKS ROLLER CHAIN FOR USE WITH S531 &
S612
58 LINKS SILENT CHAIN FOR USE WITH S818 & S819
1997-2000 42 TEETH MUST BE USED WITH 163 CHAIN
42 TEETH MUST BE USED WITH 370 CHAIN
1997-2000 21 TEETH MUST BE USED WITH 163 CHAIN
21 TEETH MUST BE USED WITH 370 CHAIN
47
312 ENG - 1957-60 - 8 Cyl. - 3.800 Bore
48
5.4-L (330) SOHC ENG - 1998-99 - 8 Cyl. - 3.55 Bore (NAVIGATOR)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Timing Kit
3-391SB
Chain
Cam Sprocket
391
S764
S766
S843
BT402
BT403
BT411
BT412
Crank Sprocket
Chain Tensioner
Continued on Next Page
168
3-344S
344
S249
S250
INCLUDES [344], [S249] & [S250]
56 LINKS
42 TEETH
21 TEETH
KIT INCLUDES (2) [391], [S764], [S766], [S843], [BT402], [BT403],
[BT411], [BT412], [BG413], [BG414]
122 LINKS 2 REQ.
42 TEETH LEFT HAND
42 TEETH RIGHT HAND
21 TEETH (1 PC. DESIGN)
LEFT HAND TENSIONER, ADAPTER PLATE NOT REQUIRED
RIGHT HAND, TENSIONER; ADAPTER PLATE NOT REQUIRED
LEFT HAND; TENSIONER ARM
RIGHT HAND; TENSIONER ARM
MERCURY (INC. LINCOLN) (Continued)
Line
No.
Part Title
Part No
Description
48
5.4-L (330) SOHC ENG - 1998-99 - 8 Cyl. - 3.55 Bore (NAVIGATOR) (Continued)
49
5.4-5 (330) SOHC ENG - 2005-13 - 8 Cyl. - 3.55 Bore (MARK LT, NAVIGATOR) LINCOLN 24V TRITON
Chain Guide
Timing Kit
3-391SC
Chain
Camshaft Sprocket
Actuator
Variable Cam Timing
Solenoid
Variable Cam Timing
Housing
391
VCTA-1000
Crank Sprocket
Chain Tensioner
Chain Guide
50
BG413
BG414
VCTS-1000
VCTH-1000L
VCTH-1000R
S869
BT411
BT412
BT429
BT430
BG413
BG414
LEFT HAND
USE LONGER TOP BOLT; FORD OE [W709818-S437] (NOT
SUPPLIED) RIGHT HAND
KIT INCLUDES (2) [391], [S869], [BT429], [BT430], [BT411],
[BT412], [BG413], [BG414], KIT DOES NOT INCLUDE CAM
SPROCKETS
122 LINKS 2 REQ.
2005-2011 MOUNTING BOLT INCLUDED 2 REQ.; 2007-08 MARK
LT; 2005-11 NAVIGATOR
MOUNTING BOLT AND INSTALLATION GASKET INCLUDED 2
REQ.
2005-2012 INCLUDES VARIABLE CAM SOLENOID & MOUNTING
GASKET LEFT HAND
2005-2012 INCLUDES VARIABLE CAM SOLENOID & MOUNTING
GASKET RIGHT HAND
21 TEETH
LEFT HAND; TENSIONER ARM
RIGHT HAND; TENSIONER ARM
RIGHT HAND; TENSIONER
LEFT HAND; TENSIONER
LEFT HAND; W/GUIDE RAIL
USE LONGER TOP BOLT; FORD OE [W709818-S437] (NOT
SUPPLIED) RIGHT HAND
5.4-A,R (330) DOHC ENG - 1999-04 - V8 - 3.55 Bore BLACKWOOD, NAVIGATOR (INTEC)
Timing Kit
3-391SA
3-391SE
3-391SF
Chain
Cam Thrust Plate Spacer
Cam Sprocket
189
391
S803SP
S790P
Crank Sprocket
S843
S869
Chain Tensioner
BT402
BT403
Chain Guide
BT404
BT405
BT417
BT429
BT430
BG415
BG416
1999-2000 KIT INCLUDES (2)[391], (2)[189], [S843], (4)[S790P],
[BT402], [BT403], [BT404], [BT405], (2)[BT417], [BG415], [BG416]
2003-2004 KIT INCLUDES (2) [391], (2) [189], [S869], (4) [S790P],
[BT404], [BT405], (2) [BT417], [BT429], [BT430], [BG415], [BG416]
(HUB DESIGN CRANK SPROCKET)
2001-2002 KIT INCLUDES (2) [391], (2) [189], [S869], (4) [S790P],
[BT402], [BT403], [BT404], [BT405], (2) [BT417], [BG415], [BG416]
(HUB DESIGN CRANK SPROCKET)
44 LINKS SECONDARY (2) REQ.
122 LINKS PRIMARY (2) REQ.
(2) REQ
20 TEETH SECONDARY (4) REQ.; NOT INTERCHANGEABLE
W/S790
1999-2000 21 TEETH (1) REQ. AFTER 1999 (1 PC. DESIGN)
2001-2004 21 TEETH 1 PC DESIGN WITH HUB - HUB ACTS AS A
SPACER
1999-2002 LEFT HAND; PRIMARY; ADAPTER PLATE NOT
REQUIRED
1999-2002 RIGHT HAND; PRIMARY; ADAPTER PLATE NOT
REQUIRED
LEFT HAND; SECONDARY
RIGHT HAND; SECONDARY
TENSIONER ARM ASSY; (2) REQ
2003-2004 RIGHT HAND; PRIMARY; PLASTIC
2003-2004 LEFT HAND; PRIMARY; PLASTIC
1999-2004 LEFT HAND
1999-2004 RIGHT HAND
169
MERCURY (INC. LINCOLN) (Continued)
Line
No.
51
Part Title
Part No
Description
351C ENG - 1969-74 - 8 Cyl. - 4.00 Bore (CLEVELAND, CLEVELAND BOSS, CLEVELAND COBRA
JET) DOES NOT INCLUDE VANS
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-494SB
3-494SB
3-498SB
494
494
498
S420
S420
S436
S475
S493
S493
1970-1974 INCLUDES [494], [S420] & [S493] W/4BC
1972 INCLUDES [494], [S420] & [S493] W/2BC
1973-1974 INCLUDES [498], [S436] & [S475] W/2BC
1970-1974 48 LINKS W/4BC
1972 48 LINKS W/2BC
1973-1974 48 LINKS W/2BC
1969-1972 36 TEETH W/2BC
1970-1974 36 TEETH W/4BC
1973-1974 36 TEETH W/2BC
1973-1974 18 TEETH W/2BC
1969-1972 18 TEETH W/2BC
1970-1974 18 TEETH W/4BC
52
351M ENG - 1975-79 - 8 Cyl. - 4.00 Bore (MODIFIED) DOES NOT INCLUDE VANS
53
5.8-H,M (351W) ENG - 1969-81 - 8 Cyl. - 4.00 Bore (WINDSOR, WINDSOR H.O. ENGINE)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
54
55
56
Crank Sprocket
Chain
Cam Sprocket
Crank Sprocket
1969 To 5/2/72 INCLUDES [358], [S406] & [S431]
From 5/2/72 TO 1981 INCLUDES [358], [S430] & [S431] EXC. H.O.
58 LINKS
1969 To 5/2/72 42 TEETH
From 5/2/72 TO 1981 42 TEETH EXC. H.O.
21 TEETH EXC. H.O.
494
S284
S321
48 LINKS
36 TEETH
18 TEETH
383 ENG - 1958-59 - 8 Cyl. - 4.3 Bore
Chain
Crank Sprocket
491
S283
52 LINKS
20 TEETH
390 ENG - 1962-70 - 8 Cyl. - 4.05 Bore
3pc Set
Cam Sprocket
Crank Sprocket
3-169S
3-494SA
169
494
S284
S410
S321
S331
1963-1970 INCLUDES [169], [S410] & [S331] HEAVY DUTY
1963-1970 INCLUDES [494], [S396] & [S321] STANDARD DUTY
1963-1970 64 LINKS HEAVY DUTY
48 LINKS STANDARD DUTY
1962 36 TEETH STANDARD DUTY
1963-1970 48 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
1963-1970 24 TEETH HEAVY DUTY
400 ENG - 1971-79 - 8 Cyl. - 4.000 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
170
3-358S
3-358SA
358
S406
S430
S431
INCLUDES [498], [S436] & [S475]
48 LINKS
36 TEETH
18 TEETH
352 ENG - 1961-62 - 8 Cyl. - 4.00 Bore
Chain
57
3-498SB
498
S436
S475
3-494SB
3-498SB
494
498
S420
S436
S475
S493
1971-1972 INCLUDES [494], [S420] & [S493]
1973-1979 INCLUDES [498], [S436] & [S475]
1971-1972 48 LINKS
1973-1979 48 LINKS
1971-1972 36 TEETH
1973-1979 36 TEETH
1973-1979 18 TEETH
1971-1972 18 TEETH
MERCURY (INC. LINCOLN) (Continued)
Line
No.
Part Title
Part No
58
406 ENG - 1962-63 - 8 Cyl. - 4.13 Bore
59
410 ENG - 1966-67 - 8 Cyl. - 4.05 Bore
Chain
Cam Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
60
3pc Set
Cam Sprocket
Crank Sprocket
INCLUDES [169], [S410] & [S331] H.D.
INCLUDES [494], [S396] & [S321]
64 LINKS H.D.
48 LINKS
48 TEETH H.D.
18 TEETH
24 TEETH H.D.
3-169S
3-494SA
169
494
S410
S321
S331
INCLUDES [169], [S410] & [S331] HEAVY DUTY
INCLUDES [494], [S396] & [S321] STANDARD DUTY
64 LINKS HEAVY DUTY
48 LINKS STANDARD DUTY
48 TEETH HEAVY DUTY
1964-1969 18 TEETH STANDARD DUTY
24 TEETH HEAVY DUTY
428 ENG - 1966-70 - 8 Cyl. - 4.13 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
62
3-169S
3-494SA
169
494
S410
S321
S331
48 LINKS
1962 36 TEETH
427 OHV ENG - 1963-69 - 8 Cyl. - 4.234 Bore
Chain
61
494
S284
Description
3-169S
3-494SA
169
494
S410
S321
S331
INCLUDES [169], [S410] & [S331] H.D.
INCLUDES [494], [S396] & [S321] STANDARD DUTY
64 LINKS H.D.
48 LINKS STANDARD DUTY
48 TEETH H.D.
18 TEETH STANDARD DUTY
24 TEETH H.D.
429 OHV ENG - 1968-73 - 8 Cyl. - 4.36 Bore
3pc Set
3-491S
3-491SA
3-491SA
Chain
Cam Sprocket
Crank Sprocket
491
S420
S493
S493
63
430 ENG - 1958-65 - 8 Cyl. - 4.300 Bore
64
460 ENG - 1968-78 - 8 Cyl. - 4.36 Bore
Chain
Crank Sprocket
3pc Set
491
S283
3-491S
3-491S
3-491SA
3-491SA
3-491SA
Chain
Cam Sprocket
Crank Sprocket
491
S420
S493
S493
1972-1973 INCLUDES [491], [S420], [S421] EXC. 1972 POLICE
1969-1971 INCLUDES (491] CHAIN, [S420] CAM SPROCKET,
[S493] CRANK SPROCKET EXC. 1971 POLICE
1971-1972 INCLUDES (491] CHAIN, [S420] CAM SPROCKET,
[S493] CRANK SPROCKET POLICE
52 LINKS
36 TEETH
1969-1971 18 TEETH
1971-1972 18 TEETH POLICE
52 LINKS
20 TEETH
1972-1978 INCLUDES [491], [S420], [S421] STANDARD ENG
1975-1976 INCLUDES [491], [S420], [S421] POLICE ENG. ONLY
1968-1971 INCLUDES (491] CHAIN, [S420] CAM SPROCKET,
[S493] CRANK SPROCKET STANDARD ENG
1973-1974 INCLUDES (491] CHAIN, [S420] CAM SPROCKET,
[S493] CRANK SPROCKET POLICE ENG
1977-1978 INCLUDES (491] CHAIN, [S420] CAM SPROCKET,
[S493] CRANK SPROCKET POLICE ENG
52 LINKS
36 TEETH
1968-1971 18 TEETH STANDARD ENG.
1973-1974 18 TEETH POLICE ENG.
Continued on Next Page
171
MERCURY (INC. LINCOLN) (Continued)
Line
No.
Part Title
Part No
Description
64
460 ENG - 1968-78 - 8 Cyl. - 4.36 Bore (Continued)
65
462 ENG - 1966-68 - 8 Cyl. - 4.38 Bore
S493
Crank Sprocket
1977-1978 18 TEETH POLICE ENG
491
S283
Chain
Crank Sprocket
52 LINKS
20 TEETH
MG
4 Cyl.
Engine
Year
Line
Engine
4 Cyl. (Continued)
Year
Line
948CC OHV
1962
1
1489CC OHV
1954-61
5
1098CC OHV
1962-67
2
1493CC OHV
1975-79
6
1250CC OHV
1947-54
3
1798CC OHV
1965-80
7
1466CC OHV
1955
4
Line
No.
Part Title
Part No
6 Cyl.
Engine
1969
8
3532CC OHV
1975-76
9
Year
Line
24
Description
948CC OHV ENG - 1962-62 - 4 Cyl. - 2.4775 Bore (MIDGET) 9CG ENG.
2
1098CC OHV ENG - 1962-67 - 4 Cyl. - 2.542 Bore (MIDGET MK.I, II & 1100 SEDAN)
3
4
5
6
7
3SR52
52 LINKS
3SR52
Chain
Line
2912CC OHV
1
Chain
Year
52 LINKS
1250CC OHV ENG - 1947-54 - 4 Cyl. - 2.6181 Bore (TC, TD & TF)
3DR60
Chain
60 LINKS
1466CC OHV ENG - 1955 - 4 Cyl. - 72.0 MM Bore (TF)
3DR60
Chain
60 LINKS
1489CC OHV ENG - 1954-61 - 4 Cyl. - 73.0 MM Bore 14H ENG
3SR52
Chain
52 LINKS
1493CC OHV ENG - 1975-79 - 4 Cyl. - 73.7 MM Bore (MIDGET MK.III)
3DR62
Chain
62 LINKS
1798CC OHV ENG - 1965-80 - 4 Cyl. - 80.3 MM Bore
3DR54
3SR52
Chain
1971 54 LINKS
1972-1974 52 LINKS
8
2912CC OHV ENG - 1969 - 6 Cyl. - 3.280 Bore (MGC, MGC/GT)
9
3532CC OHV ENG - 1975-76 - 6 Cyl. - (MGB)
3DR54
Chain
54 LINKS
359
Chain
54 LINKS
MITSUBISHI
4 Cyl.
Engine
Year
Line
Engine
Year
Line
4 Cyl. (Continued)
Engine
6 Cyl. (Continued)
1.5 (G15B) OHC
1985-90
1
2.0 (4G63,4G63T) DOHC
1989-99
13
3.0 (6G72) SOHC
1989-99
1.5 (1468CC) OHC
1987-94
2
2.0 (4G63) DOHC
2003-06
14
3.0 (6G72) DOHC
1991-99
25
1.5 (4G15) SOHC
1991-02
3
2.3 (4D55)
1983-85
15
3.0 (6G72) SOHC
1995-05
26
1.6 (G32B) OHC
1985-88
4
2.4 (G64B) SOHC
1985-93
16
3.5 (6G74) DOHC
1994-96
27
1.6 (4G61) DOHC
1989
5
2.4 (4G64) DOHC
1994
17
3.5 (6G74) SOHC
1997-04
28
1.6-Y (4G61) DOHC
1991-92
6
2.4 (4G64) SOHC
1994-96
18
3.7 (226) SOHC
2006-09
29
1.8 (G62B) OHC
1983-88
7
2.4 (4G64) SOHC
1993-05
19
3.8 (3797CC) SOHC
2003-05
30
2005-12
31
2006-07
32
1.8 (4G37) OHC
1990-94
8
2.4 (4G69) SOHC
2004-12
20
3.8 (6G75) SOHC
1.8 (4G93) SOHC
1992-02
9
2.4 SOHC ENG
2004
21
2.0 (G63B) SOHC
1983-89
10
2.6 (G54B) SOHC
1983-89
22
8 Cyl.
2.0 (4G63) SOHC
1989-93
11
2.0-Y (420A) DOHC
1996-99
12
6 Cyl.
1988-90
23
172
3.0 (6G72) SOHC
4.7-N (285) SOHC
MITSUBISHI (Continued)
Line
No.
1
2
3
Part Title
Part No
Description
1.5 (G15B) OHC ENG - 1985-90 - 4 Cyl. - 75.5 MM Bore (MIRAGE-1468CC) (8V)
Belt
Belt Tensioner
B-0128
B-073
BD33
1987-1988 92 TEETH
1985-1986 92 TEETH
1.5-J (1468CC) OHC ENG - 1987-94 - 4 Cyl. - 75.5 MM Bore (PRECIS1468CC) 8V
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
B-0128
B-073
S670
S633
BD33
1990-1992 92 TEETH
1987-1989 92 TEETH
1987-1989 40 TEETH
1987-1989 20 TEETH
1.5 (4G15) SOHC ENG - 1991-02 - 4 Cyl. - 75.5 MM Bore (MIRAGE--1468CC) (12V)
Belt
B-0191
B-0289
From 5/90 TO 1996 92 TEETH
1997-2002 107 TEETH
4
1.6 (G32B) OHC ENG - 1985-88 - 4 Cyl. - 77 MM Bore (MIRAGE--1597CC TURBO)
5
1.6 (4G61) DOHC ENG - 1989 - 4 Cyl. - 76.9 MM Bore (MIRAGE-TURBO)
6
1.6-Y (4G61) DOHC ENG - 1991-92 - 4 Cyl. - 76.9 MM Bore (MIRAGE GS) NON-TURBO
7
1.8 (G62B) OHC ENG - 1983-88 - 4 Cyl. - 80.6 MM Bore (CORDIA,TREDIA--1795CC)
Belt
Oil Pump Sprocket
Belt Tensioner
Belt
Belt Tensioner
Belt
Belt Tensioner
Belt
Belt Tensioner
8
Belt
B-0165
BT194
BT225
B-0158
B-089
BT105
BT106
BT161
151 TEETH
IDLER
LOWER ADJUSTER
151 TEETH
IDLER
TENSIONER
1986-1988 122 TEETH CAMSHAFT BELT
1983-1985 122 TEETH CAMSHAFT BELT
CAMSHAFT BELT TENSIONER
1983 To 4/87 BALANCE SHAFT BELT TENSIONER
1988 BALANCE SHAFT BELT TENSIONER
B-0158
B-090
BD38
BT160
1990-1994 122 TEETH CAMSHAFT
1990-1994 55 TEETH BAL. SHAFT
BAL. SHAFT
CAMSHAFT
1.8 (4G93) SOHC ENG - 1992-02 - 4 Cyl. - 81 MM Bore (EXPO LRV 1992-94) (MIRAGE 1993-02)
(1834CC)
Belt
10
B-0165
BT194
BT225
120 TEETH
24 TEETH 24 TEETH
1985 To 12/86
1987-1988
1.8 (4G37) OHC ENG - 1989-94 - 4 Cyl. - 80.6 MM Bore (ECLIPSE--1755CC W/BALANCE SHAFT)
Belt Tensioner
9
B-093
S8003
BD32
BT160
B-0201
B-0201
B-0288
1992-1994 121 TEETH EXPO
1993-1996 121 TEETH MIRAGE
1997-2002 116 TEETH MIRAGE
2.0 (G63B) SOHC ENG - 1983-89 - 4 Cyl. - 85 MM Bore (1984-88 CORDIA) (1984-88 TREDIA)
(1983-89 PICK-UP 1997CC)
Belt
Belt Tensioner
B-0158
B-089
B-090
BT105
BT106
BT161
1986-1989 122 TEETH CAMSHAFT BELT
1983 To 7/86 122 TEETH CAMSHAFT BELT
1983-1987 55 TEETH BALANCE SHAFT BELT
CAMSHAFT BELT TENSIONER
1983 To 4/87 BALANCE SHAFT BELT TENSIONER
From 5/87 TO 1989 BALANCE SHAFT BELT TENSIONER
173
MITSUBISHI (Continued)
Line
No.
11
Part Title
Part No
Description
2.0 (4G63) SOHC ENG - 1989-93 - 4 Cyl. - 85 MM Bore (GALANT--1997CC)
Belt
Belt Tensioner
B-0155
B-0168
B-0232
BT106
BT196
BT197
1989-1992 122 TEETH CAMSHAFT
1993 65 TEETH BALANCE SHAFT
1993 123 TEETH CAMSHAFT
1989-1992 BALANCE SHAFT
1989-1992 CAMSHAFT
1993 BALANCE SHAFT
12
2.0-Y (420A) DOHC ENG - 1996-99 - 4 Cyl. - 87.5 MM Bore (ECLIPSE) (1997CC)
13
2.0 (4G63,4G63T) DOHC ENG - 1989-99 - 4 Cyl. - 85 MM Bore (GALANT, ECLIPSE) (INCLUDES
TURBOCHARGED) (1997CC)
Belt
Belt
Belt Tensioner
B-0246
B-0167
B-0168
BT194
BT197
BT225
150 TEETH
153 TEETH CAMSHAFT
65 TEETH BALANCE SHAFT
1989-1994 CAMSHAFT
1989-1994 BALANCE SHAFT
1989-1994 LOWER ADJUSTER
14
2.0 (4G63) DOHC ENG - 2003-06 - 4 Cyl. - 85 MM Bore (LANCER) (1997,2000CC) TURBO
15
2.3 (4D55) ENG - 1983-85 - 4 Cyl. - 91.2 MM Bore (TRUCKS--2346CC TURBO DIESEL)
Belt
Belt
Cam Sprocket
Crank Sprocket
16
Belt Tensioner
18
Belt
Belt Tensioner
B-0124
B-0124
BT105
BT106
BT161
1985-1990 123 TEETH GALANT & VAN; CAMSHAFT
1991-1992 123 TEETH MIGHTY MAX; CAMSHAFT
CAMSHAFT
1985 To 4/87 BALANCE SHAFT
From 5/87 TO 1988 BALANCE SHAFT
B-0168
B-0256
BT197
65 TEETH BALANCE SHAFT BELT
154 TEETH CAMSHAFT BELT
BALANCE SHAFT BELT TENSIONER
2.4 (4G64) SOHC ENG - 1994-96 - 4 Cyl. - 86.5 MM Bore (MIGHTY MAX) 8V (2351CC)
Belt
B-0168
B-0229
BT105
BT197
65 TEETH BALANCE SHAFT BELT
123 TEETH CAMSHAFT BELT
CAMSHAFT BELT TENSIONER
BALANCE SHAFT BELT TENSIONER
2.4 (4G64) SOHC ENG - 1993-05- 4 Cyl. - 86.5 MM Bore (ECLIPSE 96-05) (EXPO 93-95) (GALANT
94-03) (MONTERO SPORT 97-99) (OUTLANDER 2003) 16V (2351CC)
Belt
Belt Tensioner
174
1983-1985 163 TEETH CAMSHAFT
1983-1985 83 TEETH BAL. SHAFT
48 TEETH
24 TEETH TIMING
32 TEETH BAL. SHAFT
2.4 (4G64) DOHC ENG - 1994 - 4 Cyl. - 86.5 MM Bore (GALANT--2351CC)
Belt Tensioner
19
B-091
B-092
S8004
S8005
S8007
2003-2004 153 TEETH
2.4 (G64B) SOHC ENG - 1985-93 - 4 Cyl. - 86.5 MM Bore (1985-87 GALANT) (1987-90 VAN) (1990-93
MIGHTY MAX) (2351CC)
Belt
17
B-0167
B-0168
B-0230
B-0230
B-0232
B-0232
B-0332
BT197
65 TEETH BALANCE SHAFT
1993-1999 124 TEETH CAMSHAFT; EXPO, ECLIPSE
1994-1998 124 TEETH CAMSHAFT; GALANT
1999-2003 123 TEETH CAMSHAFT; GALANT
2000-2004 123 TEETH CAMSHAFT; ECLIPSE
2004-2005 122 TEETH CAMSHAFT; GALANT
BALANCE SHAFT BELT TENSIONER
MITSUBISHI (Continued)
Line
No.
20
Part Title
Part No
Description
2.4 (4G69) SOHC ENG - 2004-12 - 4 Cyl. - 87.0 MM Bore (ECLIPSE,GALANT,LANCER,OUTLANDER)
(GRANDIS - MEXICO) 16V (2378CC)
Belt
B-0168
B-0332
2004 65 TEETH OUTLANDER; BALANCE SHAFT
2004-2009 122 TEETH CAMSHAFT BELT
21
2.4 SOHC ENG - 2004 - 4 Cyl. - 87.0 MM Bore (LANCER) 16V (2400CC)
22
2.6 (G54B) SOHC ENG - 1983-89 - 4 Cyl. - 91.1 MM Bore (STARION TURBO, MONTERO,MIGHTY
MAX TRUCKS--2555CC)
Belt
Timing Kit
B-0332
3-102S
3DR102-2
8MMSR90-1
Balance Shaft Elim. Kit
BSEK122
Chain
3DR102
8MMSR90
S458
S407
S455
S567
BT49
BD30
BD31
BG48
BG51
BG64
Cam Sprocket
Crank Sprocket
Balance Shaft Sprocket
Chain Tensioner
Chain Guide
122 TEETH CAMSHAFT
KIT INCLUDES [3DR102-2] CAMSHAFT KIT & [8MMSR90-1]
BALANCE SHAFT KIT
KIT INCLUDES [3DR102], [S458], [S455], [BD31], [BD30] & [BT49]
(CAMSHAFT KIT)
KIT INCLUDES [8MMSR90], [S407], [S567] (2), [BG48], [BG64] &
[BG51] (BALANCE SHAFT KIT)
KIT INCLUDES CHAIN, OIL PUMP SHAFT PLUG, OIL GALLEY
PLUG, OIL PUMP MOUNTING GASKET AND INSTRUCTION
SHEET
102 LINKS CAMSHAFT CHAIN
90 LINKS BALANCE SHAFT CHAIN
38 TEETH
34 TEETH OUTER
19 TEETH INNER
17 TEETH 2 REQ.
TIMING CHAIN GUIDE; TENSION SIDE
TIMING CHAIN GUIDE; SLACK SIDE
BALANCE SHAFT CHAIN GUIDE; LOWER LEFT
BALANCE SHAFT CHAIN GUIDE; LOWER RIGHT
BALANCE SHAFT CHAIN GUIDE; UPPER RIGHT
23
3.0 (6G72) SOHC ENG - 1988-90 - V6 - 89.0, 91.1 MM Bore (1988 GALANT) (1989-90 SIGMA)
24
3.0 (6G72) SOHC ENG - 1989-99 - V6 - 91.1 MM Bore (3000 GT 1997-99, DIAMANTE 1992-96,
MIGHTY MAX 1990-94, MONTERO 1989-96, MONTERO SPORT 1989-90, 1997-99) 12V
Belt Tensioner
Belt
25
26
Belt Tensioner
BT195
B-0139
B-0139
B-0139
BT195
1989-1994 149 TEETH
1995-1996 149 TEETH DIAMANTE ONLY
1997-1999 149 TEETH 3000GT
3.0 (6G72) DOHC ENG - 1991-99 - V6 - 91.2 MM Bore (3000GT 1991-99 & DIAMANTE
1992-95--2972CC)
Belt
Belt Tensioner
Idler
B-0195
BT271
BT227
257 TEETH
RIGHT HAND; TENSIONER PULLEY
LEFT HAND; IDLER PULLEY
3.0 (6G72) SOHC ENG - 1995-05 - V6 - 91.1 MM Bore (2000-05 ECLIPSE) (1999-03 GALANT)
(1995-96 MONTERO) (1997-03 MONTERO SPORT) 24V
Belt
Cam Sprocket
Belt Tensioner
Idler
B-0259
S866
S866
BT195
BT271
BT5121
BT227
187 TEETH
1997-2003 50 TEETH MONTERO SPORT RIGHT HAND
1999-2005 50 TEETH ECLIPSE, GALANT
1995-1996 BELT TENSIONER
RIGHT HAND; TENSIONER PULLEY
1997-2005 BELT TENSIONER
LEFT HAND; IDLER PULLEY
175
MITSUBISHI (Continued)
Line
No.
Part Title
Part No
Description
27
3.5 (6G74) DOHC ENG - 1994-96 - V6 - 93.0 MM Bore (1994-96 MONTERO) (3497CC)
28
3.5 (6G74) SOHC ENG - 1997-04 - V6 - 93.0 MM Bore (DIAMANTE 1997-04) (MONTERO 1997-02)
(MONTERO SPORT 1999-04)
Belt
Belt Tensioner
Idler
Belt
Cam Sprocket
Belt Tensioner
29
Idler
Timing Kit
3-393SB
Chain
194
393
S824
S868
S861
S863
BT418
BT431
BT432
BT433
BG434
BG435
Crank Sprocket
Idler Sprocket
Chain Tensioner
Chain Guide
Cam Sprocket
Belt Tensioner
Idler
B-0287
B-0320
S866
BT271
BT5121
BT227
B-0287
B-0320
Cam Sprocket
Belt Tensioner
Idler
2004 195 TEETH ENDEAVOR
201 TEETH MONTERO
50 TEETH
RIGHT HAND; TENSIONER PULLEY
TIMING BELT TENSIONER
LEFT HAND; IDLER PULLEY
S866
BT271
BT227
195 TEETH EXCLUDES MONTERO; INTERFERENCE ENGINE
APPLICATION
2005-2006 201 TEETH MONTERO; INTERFERENCE ENGINE
APPLICATION
50 TEETH
RIGHT HAND; TENSIONER PULLEY
LEFY HAND; IDLER PULLEY
4.7-N (285) SOHC ENG - 2006-07 - 8 Cyl. - 93.0 MM Bore (RAIDER) MAGNUM CHRYSLER ENGINE
Timing Kit
3-393SC
Chain
393
Continued on Next Page
176
KIT INCLUDES [393], (2) [194], [BT418], [BT431], [BT432], (2)
[BT433], [BG434], [BG435] THIS KIT CONTAINS NO
SPROCKETS. SPROCKETS MUST BE PURCHASED
SEPERATELY TO COMPLETE KIT;
94 LINKS SECONDARY (2) REQ.
70 LINKS PRIMARY
26 TEETH LEFT HAND
26 TEETH RIGHT HAND;W/NGC SPROCKET
25 TEETH
50 TEETH DOES NOT INCLUDE IDLER GEAR SHAFT
PRIMARY
RIGHT HAND; SECONDARY TENSIONER
LEFT HAND; SECONDARY TENSIONER
SECONDARY ARM (2) REQ.
RIGHT HAND SECONDARY
LEFT HAND SECONDARY
3.8 (6G75) SOHC ENG - 2005-12 - V6 - 95 MM Bore (GALANT,ENDEAVOR,ECLIPSE,MONTERO) 24V
(3828CC)
Belt
32
195 TEETH INTERFERENCE APPLICATION
50 TEETH DIAMANTE
2001-2002 50 TEETH MONTERO
RIGHT HAND; TENSIONER PULLEY
DIAMANTE; RIGHT LOWER; TENSIONER ARM
1999-2004 MONTERO SPORT; TENSIONER ARM
BELT TENSIONER
LEFT HAND; IDLER PULLEY
3.8 (3797CC) SOHC ENG - 2003-05 - V6 - 95 MM Bore (2004 ENDEAVOR, 2003-05 MONTERO)
(3797CC)
Belt
31
B-0287
S866
S866
BT271
BT5120
BT5120
BT5121
BT227
148 TEETH
RIGHT HAND; TENSIONER PULLEY
LEFT HAND; IDLER PULLEY
3.7 (226) SOHC ENG - 2006-09 - 6 Cyl. - 93.0 MM Bore (RAIDER) MAGNUM CHRYSLER ENGINE
Cam Sprocket
30
B-0253
BT271
BT227
KIT INCLUDES [393], (2) [394], [S852], [S870], [S861], [BT418],
[BT419], [BT420], (2) [BD421], (2) [BG422], [S863], [S865] W/NGC
CAM SPROCKET; DOES NOT INCLUDE INSTALLATION BOLTS
70 LINKS PRIMARY
MITSUBISHI (Continued)
Line
No.
32
Part Title
Part No
Description
4.7-N (285) SOHC ENG - 2006-07 - 8 Cyl. - 93.0 MM Bore (RAIDER) MAGNUM CHRYSLER ENGINE
(Continued)
394
S852
S870
S861
S863
S865
BT418
BT419
BT420
BD421
BG422
Chain
Cam Sprocket
Crank Sprocket
Idler Sprocket
Chain Tensioner
Damper
Chain Guide
53 LINKS SECONDARY (2) REQ.
30 TEETH LEFT HAND
30 TEETH RIGHT HAND; W/NGC TARGET WHEEL
25 TEETH
50 TEETH PRIMARY
30 TEETH SECONDARY
PRIMARY TENSIONER
HYD RIGHT HAND; SECONDARY TENSIONER
HYD LEFT HAND; SECONDARY TENSIONER
SECONDARY TENSIONER ARM (2) REQ.
(2) REQ.
NISSAN/DATSUN
Year
Line
1.2L (1237CC) A12 OHV
1979-82
1
1.3L (1288CC) A13 OHV
1973-74
2
4 Cyl.
Engine
Engine
Year
2.0L (1952CC) L20B OHC
1974-80
18
2.0 (1952CC) Z20 SOHC
1983-86
19
DIESEL OHV
1980-81
20
2.5L (2500CC) QR25DE
4 Cyl. (Continued)
1.4L (1393CC) A14 OHV
1975-82
3
2.0L (1952CC) Z20E,Z20S
1.5L (1488CC) E15T OHC
1983-84
4
SOHC
1.5L (1488CC) A15 OHV
1979-82
5
2.0L (1974CC) CA20E
1.5L (1488CC) E15,E15S
1982-83
6
OHC
OHC
Line
4 Cyl.
Engine
2.5L (2488CC) SD25
1984-89
21
1982-83
22
6 Cyl.
35
36
1981-83
37
1984-89
38
1990-96
39
1985-98
40
1995-01
41
L28E,L28ET OHC
7
OHC
8
2.0L (1982CC) U20 OHC
1967-70
23
2.8L (2793CC) LD28
2.0L (1997CC) MR20DE
2007-12
24
DIESEL SOHC
1991-01
25
1981-83
26
1981-83
27
1.6L (1597CC) GA16DE
3.0L (2960CC)
DOHC
2.0L (1998CC) SR20DE
1991-99
10
DOHC
1989-90
11
DIESEL OHV
1.7L (1688CC) CD17
1983-86
12
2.2L (2182CC) Z22 &
1.8L (1770CC) L18 OHC
1973-74
13
2.4L (2389CC) KA24DE
1.8L (1798CC) MR18DE
2007-13
14
DOHC
2010-13
15
1988-89
15
DOHC
1.8L (1809CC) CA18ET
1984-86
16
OHC
1.8L (1809CC) QG18DE
2000-06
28
1989-97
29
SOHC
2.4L (2389CC) Z24,Z24I
1.8L (1809CC) CA18DE
1991-04
3.0L (2988CC) VQ30DE
DOHC
2.4L (2389CC) KA24E
DOHC
3.0L (2960CC) VG30E
SOHC
Z22E OHC
1.8L (1797CC) MR18DE
VG30DE,VG30DETT
DOHC
1.6L (1597CC) GA16I OHC
DOHC
VG30,VG30I,VG30T SOHC
3.0L (2960CC)
DOHC
2.2L (2164CC) SD22
DIESEL SOHC
34
1974-75
1969-73
9
2002-13
1975-83
1987
1983-88
33
2.8L (2753CC)
1.6L (1597CC) CA16DE
E16,E16I,E16S OHC
1983-86
2.6L (2565CC) L26 OHC
1.6L (1595CC) L16 OHC
1.6L (1597CC)
Line
DOHC
2.0L (1974CC) CA20S
DOHC
Year
1983-89
30
VG33ER (SOHC)
2001-04
42
3.3L (3275CC) VG33E
1996-04
43
2005-14
44
2004-13
45
SOHC
OHC
4.0L (3954CC) VQ40DE
6 Cyl.
DOHC
2.4L (2393CC) L24 OHC
1970-73
31
2.4L (2393CC) L24E OHC
1977-84
32
8 Cyl.
5.6L (5552CC) VK56DE
DOHC
17
DOHC
Line
No.
Part Title
Part No
Description
1
1.2L (1237CC) A12 OHV ENG - 1979-82 - 4 Cyl. - 75.0 MM Bore (1979-82 210 A12 1237CC)
2
1.3L (1288CC) A13 OHV ENG - 1973-74 - 4 Cyl. - 73.0 MM Bore (MODEL 1300, B210 1288CC)
Timing Kit
Chain
Timing Kit
Chain
3DR54-1
3DR54
3DR54-1
3DR54
KIT INCLUDES [3DR54], [S478], [S477] & [BT05]
54 LINKS
KIT INCLUDES [3DR54], [S478], [S477] & [BT05]
54 LINKS
177
NISSAN/DATSUN (Continued)
Line
No.
3
4
5
6
7
8
9
10
Part Title
Timing Kit
Chain
3DR54-1
3DR54
KIT INCLUDES [3DR54], [S478], [S477] & [BT05]
54 LINKS
1.5L (1488CC) E15T OHC ENG - 1983-84 - 4 Cyl. - 76.0 MM Bore (PULSAR NX 1488CC)
Belt
Crank Sprocket
Belt Tensioner
B-077
S557
BT75
106 TEETH
20 TEETH
1.5L (1488CC) A15 OHV ENG - 1979-82 - 4 Cyl. - 76.0 MM Bore (1981 310) (1979-82 210 1491CC)
Timing Kit
Chain
3DR54-1
3DR54
KIT INCLUDES [3DR54], [S478], [S477] & [BT05]
54 LINKS
1.5L (1488CC) E15,E15S OHC ENG - 1982-83 - 4 Cyl. - 76.0 MM Bore (1982 310 E15) (1982-83
SENTRA E15S 1491CC)
Belt
Crank Sprocket
Belt Tensioner
B-077
S557
BT75
106 TEETH
20 TEETH
1.6L (1595CC) L16 OHC ENG - 1969-73 - 4 Cyl. - 83.0 MM Bore (1969-73 PL510) (1969-72 PL521
PICKUP) (1969-73 PL620 PICKUP 1595CC)
Timing Kit
3DR110-1
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Damper
3DR110
S462
S463
BT07
BD27
1969-1971 KIT INCLUDES [3DR110], [S462], [S463], [BT07],
[BD27] & [BD28]
110 LINKS
1969-1971 40 TEETH
20 TEETH
1969-1973 UPPER
1.6L (1597CC) CA16DE DOHC ENG - 1987 - 4 Cyl. - 76.0 MM Bore (PULSAR NX 1597CC)
Belt
B-0137
151 TEETH
1.6L (1597CC) E16,E16I,E16S OHC ENG - 1983-88 - 4 Cyl. - 76.0 MM Bore (1983-86 PULSAR &
SENTRA E16) (1987-88 PULSAR NX E16I) (1987-88 SENTRA E16S)
Belt
Crank Sprocket
Belt Tensioner
B-077
S557
BT75
106 TEETH
20 TEETH
1.6L (1597CC) GA16DE DOHC ENG - 1991-99 - 4 Cyl. - 76.0 MM Bore (1991-99 SENTRA, 1991-93
NX, 1995-98 200SX)
Timing Kit
3-191S
Chain
190
191
S720
S731
S737
BT229
BT230
BG231
BG232
BG233
Chain Guide
BG234
KIT INCLUDES [190], [191], [S720], [S731], [S737], [BG233],
[BG234], [BT229], [BT230]; DOES NOT CONTAIN VVT SPROCKET
80 LINKS CRANK TO IDLER; LOWER
54 LINKS CAM TO CAM; UPPER
25 TEETH EXHAUST
18 TEETH
36 & 25 TEETH
UPPER
LOWER
UPPER- SLACK SIDE RIGHT HAND
UPPER- TENSION SIDE LEFT HAND
LOWER- TENSION SIDE LEFT HAND (NOTE: USE 08120-8161E
BOLTS W/THIS GUIDE - NOT SUPPLIED)
LOWER- SLACK SIDE RIGHT HAND
1.6L (1597CC) GA16I OHC ENG - 1989-90 - 4 Cyl. - 76.0 MM Bore (SENTRA & PULSAR NX)
Timing Kit
Continued on Next Page
178
Description
1.4L (1393CC) A14 OHV ENG - 1975-82 - 4 Cyl. - 76.0 MM Bore (1975-78 B210) (1978-82 210)
(1978-80 310) (1976-78 F10 1393CC)
Cam Sprocket
Crank Sprocket
Idler Sprocket
Chain Tensioner
11
Part No
3SR92-1
KIT INCLUDES [3SR92], [S686], [S693], [BT179], [BG180] &
[BG181]
NISSAN/DATSUN (Continued)
Line
No.
11
Part Title
14
3SR92
S686
S693
BT179
BG180
BG181
92 LINKS
38 TEETH
19 TEETH
TENSION SIDE
LOOSE SIDE
1.7L (1688CC) CD17 DIESEL SOHC ENG - 1983-86 - 4 Cyl. - 80.0 MM Bore (1983-86 SENTRA BASE,
DX,SE,XE)
Belt
13
Description
1.6L (1597CC) GA16I OHC ENG - 1989-90 - 4 Cyl. - 76.0 MM Bore (SENTRA & PULSAR NX)
(Continued)
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
12
Part No
Cam Sprocket
Inj. Pump Drive Sprocket
Belt Tensioner
Belt Guide
B-096
B-097
S8026
S635
BT118
BG119
117 TEETH CAMSHAFT - EXC. CANADA
76 TEETH INJ. PUMP- EXC. CANADA
42 TEETH
33 TEETH
CAMSHAFT
CAMSHAFT
1.8L (1770CC) L18 OHC ENG - 1973-74 - 4 Cyl. - 85.0 MM Bore (1973 PL610) (1974 PL710) (1974
PL620)
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Damper
3DR110-1
3DR110
S462
S463
BT07
BD27
KIT INCLUDES [3DR110], [S462], [S463], [BT07], [BD27] & [BD28]
110 LINKS
40 TEETH EXC. 620 (1973)
20 TEETH
1973-1974 UPPER
1.8L (1798CC) MR18DE DOHC ENG - 2007-13 - 4 Cyl. - 84.0 MM Bore (07-12 VERSA) (09-13 CUBE)
Timing Kit
3-0430S
2007-2011 SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(2)
TENSIONERS,(3) GUIDES,(1) CAM SPROCKET,(1) CRANK
SPROCKET, (1) BALANCE SHAFT SPROCKET
15
1.8L (1809CC) CA18DE DOHC ENG - 1988-89 - 4 Cyl. - 83.0 MM Bore (PULSAR NX SE)
16
1.8L (1809CC) CA18ET OHC ENG - 1984-86 - 4 Cyl. - 83.0 MM Bore (200SX)
17
18
19
Belt
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
B-0137
B-0100
S572
S559
BT76
151 TEETH
95 TEETH
40 TEETH
20 TEETH
1.8L (1809CC) QG18DE DOHC ENG - 2000-06 - 4 Cyl. - 80 MM Bore (SENTRA CA, GXE, S, XE)
Timing Kit
3-724S
SOLD AS KIT ONLY; KIT INCLUDES (1) CHAIN,(1)
TENSIONER,(3) GUIDES,(1) CAM SPROCKET,(1) CRANK
SPROCKET, (1) GASKET, (3) SEALS
2.0L (1952CC) L20B OHC ENG - 1974-80 - 4 Cyl. - 85.0 MM Bore (1977-80 510) (1974-76 610)
(1975-78 620) (1974 710) (1979-80 720) (1976-80 200SX)
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Damper
3DR114-1
3DR114
S462
S463
BT07
BD27
KIT INCLUDES [3DR114], [S462], [S463], [BT07], [BD27] & [BD28]
114 LINKS
40 TEETH
20 TEETH
1974-1980 UPPER
2.0 (1952CC) Z20 SOHC ENG - 1983-86 - 4 Cyl. - 85.0 MM Bore (720 Z20 ENG)
Timing Kit
3DR102-1
Chain
Cam Sprocket
3DR102
S462
KIT INCLUDES [3DR102], [S462], [S463], [BT07], [BG127] &
[BG55]
102 LINKS CAMSHAFT
40 TEETH
Continued on Next Page
179
NISSAN/DATSUN (Continued)
Line
No.
19
20
21
22
23
Part Title
Part No
Description
2.0 (1952CC) Z20 SOHC ENG - 1983-86 - 4 Cyl. - 85.0 MM Bore (720 Z20 ENG) (Continued)
Crank Sprocket
Chain Tensioner
Chain Guide
S463
BT07
BG127
BG55
20 TEETH
LEFT
RIGHT
2.0L (1952CC) Z20E,Z20S SOHC ENG - 1980-81 - 4 Cyl. - 85.0 MM Bore (1980-81 200SX Z20E)
(1980-81 510 Z20S)
Timing Kit
3DR102-1
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
3DR102
S462
S463
BT07
BG127
BG55
KIT INCLUDES [3DR102], [S462], [S463], [BT07], [BG127] &
[BG55]
102 LINKS CAMSHAFT
40 TEETH
20 TEETH
LEFT
RIGHT
2.0L (1974CC) CA20E OHC ENG - 1984-89 - 4 Cyl. - 84.5 MM Bore (1984-88 200SX) (1984-89
STANZA SEDAN) (1984-85 & 87 STANZA HATCHBACK) (1986-89 STANZA WAGON)
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
B-078
S572
S559
BT76
98 TEETH
40 TEETH
20 TEETH
2.0L (1974CC) CA20S OHC ENG - 1982-83 - 4 Cyl. - 24.5 MM Bore (STANZA)
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
B-078
S572
S559
BT76
98 TEETH
1982 To 11/82 40 TEETH
20 TEETH
2.0L (1982CC) U20 OHC ENG - 1967-70 - 4 Cyl. - 87.2 MM Bore (2000)
Chain
3DR54
3DR94
54 LINKS 1ST CHAIN
94 LINKS 2ND CHAIN
24
2.0L (1997CC) MR20DE DOHC ENG - 2007-12 - 4 Cyl. - 84.0 MM Bore (SENTRA)
25
2.0L (1998CC) SR20DE DOHC ENG - 1991-01 - 4 Cyl. - 86.0 MM Bore (200SX, SENTRA, NX)
(LUCINO, TSURU - MEXICO)
Timing Kit
3-0430S
Timing Kit
3-3SRH124S
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
3SRH124
S724
S699
BT245
BG246
BG247
BG248
2007-2011 SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(2)
TENSIONERS,(3) GUIDES,(1) CAM SPROCKET,(1) CRANK
SPROCKET, (1) BALANCE SHAFT SPROCKET
1991-1997 KIT INCLUDES [3SRH124], (2) [S724], [S699], [BT245],
[BG246], BG248], [BG247]
124 LINKS
36 TEETH (2) REQ.
18 TEETH
1991-1998 LEFT HAND
1991-1998 RIGHT HAND
1991-1997 UPPER
26
2.2L (2164CC) SD22 DIESEL OHV ENG - 1981-83 - 4 Cyl. - 83.0 MM Bore (720)
27
2.2L (2182CC) Z22 & Z22E OHC ENG - 1981-83 - 4 Cyl. - 87.0 MM Bore (720 1981-83 Z22) (200SX
1982-83 Z22E)
Cam Gear
Crank Gear
Timing Kit
3DR102-1
Chain
3DR102
Continued on Next Page
180
2050
2051
56 TEETH
28 TEETH
KIT INCLUDES [3DR102], [S462], [S463], [BT07], [BG127] &
[BG55]
102 LINKS CAMSHAFT
NISSAN/DATSUN (Continued)
Line
No.
27
Part Title
S462
S463
BT07
BG127
BG55
40 TEETH
20 TEETH
LEFT HAND
RIGHT HAND
2.4L (2389CC) KA24DE DOHC ENG - 1991-04 - 4 Cyl. - 89.8 MM Bore (1991-98 240SX) (1993-01
ALTIMA) (1998-04 FRONTIER) (2000-04 XTERRA)
Timing Kit
3-3DRH48
3-3DRH48
3-4210SA
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
29
Description
2.2L (2182CC) Z22 & Z22E OHC ENG - 1981-83 - 4 Cyl. - 87.0 MM Bore (720 1981-83 Z22) (200SX
1982-83 Z22E) (Continued)
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
28
Part No
3DRH48
3DRH48
3SRH92
3SRH92
S778
S778
S699
BT235
BT235
BT236
BT236
BG237
BG237
BG238
BG238
BG239
BG239
BG240
BG240
1991-1997 KIT INCLUDES [3DRH48], [3SRH92], [S699], (2 [S778],
[BG237], [BG238], [BG239], [BG240], [BT235], [BT236] KIT DOES
NOT INCLUDE IDLER SPROCKET
1998 KIT INCLUDES [3DRH48], [3SRH92], [S699], (2 [S778],
[BG237], [BG238], [BG239], [BG240], [BT235], [BT236] 240SX; KIT
DOES NOT INCLUDE IDLER SPROCKET
1998-2004 SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(2)
TENSIONERS,(2) GUIDES,(2) CAM SPROCKETS,(1) IDLER
SPROCKET,(1) CRANK SPROCKET, (1) SEAL, (3) BOLTS, (2)
SHIMS, (4) GASKETS; NOTE: SHIMS MUST BE PLACED BEHIND
THE CURVE RAIL PIVOT BOLT. THE CURVE RAIL MUST BE
FREE TO MOVE ALTIMA,FRONTIER,XTERRA
1991-1997 48 LINKS CAMS TO IDLER
1998 48 LINKS 240SX; CAMS TO IDLER
1991-1997 92 LINKS CRANK TO IDLER
1998 92 LINKS 240SX; CRANK TO IDLER
1991-1997 19 TEETH (2) REQ.- DOUBLE ROW
1998 19 TEETH 240SX;(2) REQ.- DOUBLE ROW
18 TEETH SINGLE ROW
1991-1997 LOWER
1998 240SX; LOWER
1991-1997 UPPER
1998 240SX; UPPER
1991-1997 UPPER
1998 240SX; UPPER
1991-1997 UPPER LEFT HAND
1998 240SX; UPPER LEFT HAND
1991-1997 LOWER RIGHT HAND
1998 240SX; LOWER RIGHT HAND
1991-1997 LOWER LEFT HAND
1998 240SX; LOWER LEFT HAND
2.4L (2389CC) KA24E SOHC ENG - 1989-97 - 4 Cyl. - 89.0 MM Bore (1989-90 240SX) (1990-92
STANZA SEDAN) (D21 1990-94) (1990 AXXESS) (1995-97 PICKUP)
Timing Kit
3SR102-1
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
3SR102
S694
S699
BT176
BG177
BG178
KIT INCLUDES [3SR102], [S694], [S699], [BT176], [BG177] &
[BG178]
102 LINKS
36 TEETH
18 TEETH
TENSION SIDE
LOOSE SIDE
181
NISSAN/DATSUN (Continued)
Line
No.
30
Part Title
Timing Kit
3DR106D-1
Chain
3DR106D
3SR106D
S462
S698
S463
S701
BT07
BG127
BG128
Crank Sprocket
Chain Tensioner
Chain Guide
32
33
34
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Damper
3DR110-2
3DR110
S462
S463
BT08
BD27
LEFT HAND
RIGHT HAND
KIT INCLUDES [3DR110], [S462], [S463], [BT08], [BD27] & [BD28]
110 LINKS
40 TEETH
20 TEETH
1970-1973 UPPER
2.4L (2393CC) L24E OHC ENG - 1977-84 - 6 Cyl. - 83.0 MM Bore (1977-81 810) (1982-84 MAXIMA)
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Damper
3DR110-2
3DR110
S462
S463
BT08
BD27
KIT INCLUDES [3DR110], [S462], [S463], [BT08], [BD27] & [BD28]
110 LINKS
40 TEETH
20 TEETH
1977-1984 UPPER
2.5L (2488CC) SD25 DIESEL OHV ENG - 1983-86 - 4 Cyl. - 89.0 MM Bore (720 TRUCK)
Cam Sprocket
2064
112 TEETH
2.5L (2500CC) QR25DE DOHC ENG - 2002-13 - 4 Cyl. - 89 MM Bore
(ALTIMA,FRONTIER,ROGUE,SENTRA,X-TRAIL) GAS/ELECTRIC-GAS
3-4212S
3-4212SA
3-4212SA
182
1983-1988 KIT INCLUDES [3DR106D], [S462], [S463], [BT07],
[BG127] & [BG128]
1983-1988 106 LINKS
1989 106 LINKS
1983-1988 40 TEETH
1989 40 TEETH
1983-1988 20 TEETH
1989 20 TEETH
2.4L (2393CC) L24 OHC ENG - 1970-73 - 6 Cyl. - 83.0 MM Bore (240Z)
Timing Kit
35
Description
2.4L (2389CC) Z24,Z24I SOHC ENG - 1983-89 - 4 Cyl. - 89.0 MM Bore (1983-86 720 Z24) (1986-89
D21 TRUCK Z24) (1987-89 PATHFINDER Z24) (1987-89 VAN Z24I)
Cam Sprocket
31
Part No
2002-2006 SOLD AS KIT ONLY; VARIABLE CAM SPROCKET NOT
INCLUDED; KIT INCLUDES (2) CHAINS,(2) TENSIONERS,(3)
GUIDES,(1) CAM SPROCKET,(1) CRANK SPROCKET, (1) SEAL
KIT ALTIMA,SENTRA ONLY
2005-2011 SOLD AS KIT ONLY; VARIABLE CAM SPROCKET NOT
INCLUDED; KIT INCLUDES (2) CHAINS,(2) TENSIONERS,(3)
GUIDES, (1) BALANCE SHAFT GUIDE,(1) CAM SPROCKET,(1)
CRANK SPROCKET, (1) BALANCE SHAFT SPROCKET, (1) SEAL
KIT FRONTIER, 2008-11 ROGUE, 2005-06 XTRAIL
2007-2011 SOLD AS KIT ONLY; VARIABLE CAM SPROCKET NOT
INCLUDED; KIT INCLUDES (2) CHAINS,(2) TENSIONERS,(3)
GUIDES, (1) BALANCE SHAFT GUIDE,(1) CAM SPROCKET,(1)
CRANK SPROCKET, (1) BALANCE SHAFT SPROCKET, (1) SEAL
KIT ALTIMA,SENTRA
2.6L (2565CC) L26 OHC ENG - 1974-75 - 6 Cyl. - 83.0 MM Bore (260)
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Damper
3DR110-2
3DR110
S462
S463
BT08
BD27
KIT INCLUDES [3DR110], [S462], [S463], [BT08], [BD27] & [BD28]
110 LINKS
40 TEETH
20 TEETH
1974-1975 UPPER
NISSAN/DATSUN (Continued)
Line
No.
36
37
38
39
Part Title
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Damper
3DR110-3
3DR110
S462
S463
BT08
BD27
KIT INCLUDES [3DR110], [S462], [S463], [BT08], [BD27] & [BD29]
110 LINKS
40 TEETH
20 TEETH
1975-1983 UPPER
2.8L (2793CC) LD28 DIESEL SOHC ENG - 1981-83 - 6 Cyl. - 83.0 MM Bore (810, MAXIMA)
Chain
Belt
Cam Sprocket
Crank Sprocket
Chain Tensioner
Damper
3DR112D
B-086
S462
S463
BT08
BD27
BD98
112 LINKS CAMSHAFT
69 TEETH INJ. PUMP
40 TEETH
20 TEETH
CAMSHAFT
1981-1983 UPPER
1981-1983 LOWER
3.0L (2960CC) VG30,VG30I,VG30T SOHC ENG - 1984-89 - 6 Cyl. - 87.0, 87.1 MM Bore (1984-89
300ZX VG30 & VG30T 87.1 BORE) (1986-89 D21 TRUCK VG30 87.1 BORE) (1987-89 PATHFINDER
VG30I 87.0 BORE)
Belt
Belt Tensioner
B-0104
BT120
133 TEETH
3.0L (2960CC) VG30DE,VG30DETT DOHC ENG - 1990-96 - V6 - 87.1 MM Bore (300ZX)
Belt
B-0180
B-0251
BT260
BT5243
BT5244
BT5283
1990-1993 228 TEETH
1994-1996 228 TEETH
RIGHT HAND
RIGHT HAND
UPPER
LEFT HAND
3.0L (2960CC) VG30E SOHC ENG - 1985-98 - V6 - 87 MM Bore (1985-94 MAXIMA) (1987-88 200SX)
(1990-95 D21 TRUCK) (1990-95 PATHFINDER) (1993-98 QUEST)
Belt
41
Description
2.8L (2753CC) L28E,L28ET OHC ENG - 1975-83 - 6 Cyl. - 86.0 MM Bore (1975-78 280Z L28E)
(1979-80 280ZX L28E) (1981-83 280ZX L28ET)
Belt Tensioner
Idler
40
Part No
Belt Tensioner
B-0104
B-0249
BT120
1985-1993 133 TEETH
1994-1998 133 TEETH
3.0L (2988CC) VQ30DE DOHC ENG - 1995-01 - V6 - 93 MM Bore (MAXIMA)
Timing Kit
3-4207S
3-4207SX
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
4207C
4208C
S884
S886
S888
S885
BT5436
BT5437
BT5441
BT5442
BG5438
FROM 01/96 TO 2001 KIT INCLUDES [4207C], (2) [4208C], (2)
[S884], (2) [S886], (2) [S888], [S885], [BG5438], [BG5439],
[BG5440], [BT5436], [BT5437], [BT5441], [BT5442] (INCLUDES
SPROCKETS)
FROM 01/96 TO 2001 KIT INCLUDES [4207C], (2) [4208C],
BG5438], [BG5439], [BG5440], [BT5436], [BT5437], [BT5441],
[BT5442] (DOES NOT INCLUDES SPROCKETS)
138 LINKS LOWER
44 LINKS UPPER; 2 REQ.
42 TEETH INTAKE & EXHAUST; OUTER; 2 REQ.
42 TEETH EXHAUST; INNER; 2 REQ.
42 TEETH INTAKE; INNER; 2 REQ.
21 TEETH
HYD TENSIONER; LOWER RIGHT HAND
FROM 01/96 TO 2001 TENSIONER ARM
TENSIONER; UPPER LEFT HAND
TENSIONER; UPPER RIGHT HAND
UPPER
Continued on Next Page
183
NISSAN/DATSUN (Continued)
Line
No.
Part Title
Part No
Description
41
3.0L (2988CC) VQ30DE DOHC ENG - 1995-01 - V6 - 93 MM Bore (MAXIMA) (Continued)
42
3.3L (3275CC) VG33ER SOHC ENG - 2001-04 - V6 - 91.5 MM Bore (FRONTIER 2001-04) (XTERRA
2002-04) SUPER CHARGED
43
44
BG5439
BG5440
Chain Guide
BT120
Belt Tensioner
3.3L (3275CC) VG33E SOHC ENG - 1996-04 - V6 - 91.5 MM Bore (FRONTIER 1999-04)
(PATHFINDER 1996-00) (QUEST 1999-02) (XTERRA 2000-04)
B-0249
BT120
Belt
Belt Tensioner
133 TEETH
4.0L (3954CC) VQ40DE DOHC ENG - 2005-14 - V6 - 95.5 MM Bore
(FRONTIER,PATHFINDER,XTERRA,NV1500,2500,3500) 24V
Timing Kit
3-0719S
Chain
719
721
Cam Sprocket
Crank Sprocket
Chain Tensioner
S1232
S1221
BD6005
BT6000
BT6001
BT6002
BG6003
BG6004
Chain Guide
45
LEFT LOWER
LEFT UPPER
2005-2012 KIT INCLUDES [719], (2) [721], (2) [S1232], [S1221],
[BT6000], [BT6001], [BT6002], [BD6005], [BG6003], [BG6004]
NOTE: CONTAINS (2) EXHAUST CAM SPROCKETS ONLY
2005-2012 210 LINKS PRIMARY; W/INVERTED ROLLERS
2005-2012 33 LINKS SECONDARY; 2 REQ.; W/INVERTED
ROLLERS
2005-2012 36 TEETH SECONDARY CHAIN; 2 REQ.; EXHAUST
2005-2012 26 TEETH
2005-2012 PRIMARY TENSIONER ARM
2005-2012 PRIMARY TENSIONER
2005-2012 SECONDARY; RIGHT HAND
2005-2012 SECONDARY; LEFT HAND
2005-2012 TENSION SIDE; UPPER
2005-2012 TENSION SIDE; LOWER
5.6L (5552CC) VK56DE DOHC ENG - 2004-13 - V8 - 98 MM Bore
(ARMADA,TITAN,PATHFINDER,NV2500,NV3500) GAS/FLEX
3-0460S
Timing Kit
2004-2007 SOLD AS KIT ONLY; THIS KIT CONTAINS NO
SPROCKETS; KIT INCLUDES (2) CHAINS,(2) TENSIONERS,(4)
GUIDES ARMADA,PATHFINDER,TITAN
NISSAN INDUSTRIAL
4 Cyl.
Engine
H20 (OHV)
Line
No.
1
184
Part Title
Year
Line
1966-70
1
Engine
Year
Line
Part No
Description
H20 (OHV) ENG - 1966-70 - 4 Cyl. - 87.2 MM Bore (FORK LIFT)
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3DR54
S598
S591
BT103
Engine
54 LINKS
40 TEETH
20 TEETH
Year
Line
OLDSMOBILE
Year
Line
1.8-0 (112) OHC
1982-86
1
3.1-J (189)
1999
27
2.0-1 (121) OHV
1987-88
2
3.3-N (204)
1989-93
28
4 Cyl.
Engine
Engine
6 Cyl. (Continued)
Year
Line
2.0-B (122) OHV
1983-84
3
3.4-E (207)
1996-04
29
2.0-P (122) OHV
1983-86
4
3.4-X (207) DOHC
1991-96
30
2.0-K (122) OHC
1987-88
5
2.2-4 (134) OHV
1993-96
6
8 Cyl.
2.2-F (134) DOHC
2002-04
7
2.3-3 (138) SOHC
1992-94
8
2.3-A (138) DOHC
1989-94
9
231-2
2.3-D (138) DOHC
1987-95
10
231-3
140
1976-77
11
231-A
2.4-T (146) DOHC
1996-01
12
231-C
151-1
1978-79
13
151-V
1978-80
2.5-5 (151)
1980-83
2.5-R (151)
2.5-U (151)
6 Cyl.
215
8 Cyl. (Continued)
260-P DIESEL
1979
49
4.3-W (262)
1996-01
50
4.3-W (262)
1992-94
51
4.3-Z (262)
1991-92
52
6 Cyl.
8 Cyl.
267
1981-82
53
1964-65
32
301-Y
1979
54
1979
33
303
1949-53
55
1984-85
34
5.0 (305)
1982-87
56
1977-87
35
5.0 (305)
1977-80
57
1975-77
36
5.0-E (305)
1991-92
58
3.8-1 (231)
1992-99
37
5.0-Y,9 (307)
1980-90
59
14
3.8-3 (231)
1986-88
38
324
1954-56
60
15
3.8-B (231)
1986
39
330
1964-67
61
1982-92
16
3.8-C (231)
1988-91
40
350-H,J
1973-76
62
1985-91
17
3.8-K (231)
1995-99
41
350-H,K & R
1968-80
63
3.8-L (231)
1991-95
42
350-G & L
1977-79
64
5.7 (350N)
1978-85
65
4.0-C (244) DOHC
2001-03
43
5.7-7 (350)
1992
66
1995-99
44
371
1957-60
67
394
1959-64
68
225
8 Cyl.
1980
18
1985-89
19
2.8-X (173)
1981-86
20
4.0-C (244) DOHC
2.8-Z (173)
1982-84
21
3.0-E (181)
1982-85
22
6 Cyl.
3.0-L (181)
1985-88
250
1966-76
45
400
1965-69
69
23
4.1-4 (252)
1981-84
46
400
1975
70
2002-04
47
403
1977-79
71
425
1965-67
72
455
1968-76
73
3.1-T (189) OHV
1989-93
24
4.2-S (256) DOHC
3.1-D (189)
1990-94
25
3.1-M (189) OHV
1993-99
26
8 Cyl.
Part Title
260-F & 8
1975-82
48
Part No
Description
1
1.8-0 (112) OHC ENG - 1982-86 - 4 Cyl. - 3.346 Bore (PONTIAC T.B.I.) (BRAZILIAN ENG)
2
2.0-1 (121) OHV ENG - 1987-88 - 4 Cyl. - 3.39 Bore (FIRENZA) (CHEVROLET ENG) (TBI)
4
5
6
Line
31
2.8-W (173)
3
Year
1961-63
6 Cyl.
2.8-7 (173)
Line
No.
Engine
Belt
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
B-081
3-370S
395
S558
S549
BT5115
111 TEETH
INCLUDES [395], [S558], [S549] & [MPC-393]
58 LINKS
40 TEETH
20 TEETH
2.0-B (122) OHV ENG - 1983-84 - 4 Cyl. - 3.39 Bore (FIRENZA) (CHEVROLET ENG)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-370S
395
S558
S549
BT5115
INCLUDES [395], [S558], [S549] & [MPC-393]
58 LINKS
40 TEETH
20 TEETH
2.0-P (122) OHV ENG - 1983-86 - 4 Cyl. - 3.39 Bore (FIRENZA)(CHEVROLET ENG) (TBI)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-370S
395
S558
S549
BT5115
INCLUDES [395], [S558], [S549] & [MPC-393]
58 LINKS
40 TEETH
20 TEETH
2.0-K (122) OHC ENG - 1987-88 - 4 Cyl. - 3.386 Bore (E.F.I.) (BRAZILIAN ENG)
Belt
B-081
1987-1988 111 TEETH
2.2-4 (134) OHV ENG - 1993-96 - 4 Cyl. - 3.500 Bore
3pc Set
3-370S
1993 INCLUDES [395], [S558], [S549] & [MPC-393]
Continued on Next Page
185
OLDSMOBILE (Continued)
Line
No.
6
7
Part Title
Part No
2.2-4 (134) OHV ENG - 1993-96 - 4 Cyl. - 3.500 Bore (Continued)
3pc Set
3-370SA
3-395S
Chain
Cam Thrust Plate Spacer
Cam Sprocket
395
MG221
S558
S774
S549
BT5115
Crank Sprocket
Chain Tensioner
Timing Kit
3-4201S
3-4202S
Oil Jet Nozzle
Camshaft Bolt
Chain
Cam Sprocket
Crank Sprocket
Balance Shaft Sprocket
Water Pump Sprocket
Chain Tensioner
Chain Guide
5467N
5496B
4201F
4202F
S850
S849
S851
S853
S855
S911
BT5383
BT5481
BG5375
BG5381
BG5382
BG5384
BG5385
BG5386
3pc Set
Chain
3-384S
384
384M
S734
S747
BG305
BG307
KIT INCLUDES [4201F], (2) [S850], [S849], [BT5481], [BG5375],
[BG5381], [BG5382], [5467N], (2) [5496B] (INCLUDES
SPROCKETS) CAMSHAFT CHAIN KIT
KIT INCLUDES [4201F], [BT5481], [BG5375], [BG5381], [BG5382],
[5467N] (DOES NOT INCLUDE SPROCKETS) TIMING CHAIN KIT
KIT INCLUDES [4202F], [S853], [S855], [S851], [BT5383],
[BG5384], [BG5385], [BG5386] BALANCE SHAFT CHAIN KIT
TORQUE TO YIELD BOLT 2 REQUIRED
148 LINKS CAMSHAFT CHAIN
134 LINKS BALANCE SHAFT CHAIN
46 TEETH 2 REQUIRED; CAMSHAFT CHAIN SPROCKET
23 TEETH OUTER
42 TEETH INNER
21 TEETH LEFT HAND; INTAKE
21 TEETH RIGHT HAND; EXHAUST
40 TEETH
BALANCE SHAFT CHAIN TENSIONER
NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mm O.A.L
CAMSHAFT CHAIN TENSIONER
CAMSHAFT CHAIN GUIDE; RIGHT HAND
CAMSHAFT CHAIN GUIDE; LEFT HAND
CAMSHAFT CHAIN GUIDE; UPPER
BALANCE SHAFT CHAIN GUIDE; RIGHT HAND
BALANCE SHAFT CHAIN GUIDE; LEFT HAND
BALANCE SHAFT CHAIN GUIDE; UPPER
INCLUDES [384], [S734] & [S747]
124 LINKS
124 LINKS FINE FINISH
38 TEETH
19 TEETH
1992-1994 LEFT HAND
1992-1994 RIGHT HAND
2.3-A (140) DOHC ENG - 1989-94 - 4 Cyl. - 3.62 Bore
Timing Kit
3-383SB
3pc Set
3-383S
3-3DR130
Chain
Continued on Next Page
186
1993 40 TEETH
1994-1996 40 TEETH
20 TEETH
FOR USE WITH BOTH [370] AND [395] CHAINS
2.3-3 (138) SOHC ENG - 1992-94 - 4 Cyl. - 3.62 Bore ACHIEVA
Cam Sprocket
Crank Sprocket
Chain Guide
9
1994-1996 INCLUDES [395], [S774], [S549] & [MPC-393]
1994-1996 INCLUDES [370], [S774], [S549], [BT5115] & [MPC-393]
RETRO FIT FINE FINISH CHAIN SET, CHECK FOR POSSIBLE
OILING PROBLEM WHEN INSTALLING SET.
58 LINKS
2.2-F (134) DOHC ENG - 2002-04 - 4 Cyl. - 86.00 MM Bore (L61 ENG ECOTEC) (ALERO)
3-4201SX
8
Description
383
KIT INCLUDES [383], (2) [S734], [S747], [BG304], [BG305] &
[BG306] INCLUDES GUIDES
1992-1994 INCLUDES [383], (2) [S734] & [S747] 2ND DES.; DOES
NOT INCLUDE GUIDES
1989-1991 INCLUDES [3DR130], (2) [S692] & [S653] 1ST DES.;
DOES NOT INCLUDE GUIDES
1989-1994 130 LINKS STANDARD FINISH CHAIN 2ND DES.
OLDSMOBILE (Continued)
Line
No.
9
Part Title
Description
2.3-A (140) DOHC ENG - 1989-94 - 4 Cyl. - 3.62 Bore (Continued)
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
10
Part No
383M
3DR130
S692
S734
S653
S747
BT188
BG304
BG305
BG306
130 LINKS FINE FINISH CHAIN
1989-1991 130 LINKS 1ST DES.
1989-1991 38 TEETH 1ST DES.; (2) REQ.
1989-1994 38 TEETH 2ND DES.; (2) REQ.
1989-1991 19 TEETH 1ST DES.
1989-1994 19 TEETH 2ND DES.
1989-1991 1ST DES.
2ND DES.; RIGHT HAND; 23MM WIDE
2ND DES.; LEFT HAND; 23MM WIDE
2ND DES.; UPPER; 23MM WIDE
2.3-D (138) DOHC ENG - 1987-95 - 4 Cyl. - 3.62 Bore
Timing Kit
3-383SB
3pc Set
3-383S
3-3DR130
383
383M
3DR130
S692
S734
S653
S747
BT188
BG304
BG305
BG306
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
KIT INCLUDES [383], (2) [S734], [S747], [BG304], [BG305] &
[BG306] UPDATED TIMING CHAIN WILL NOT FIT ORIGINAL
WATER PUMP SPROCKET USE GM 24570609 WITH 383 CHAIN.
MELLING DOES NOT FURNISH
1992-1995 INCLUDES [383], (2) [S734] & [S747] 2ND DES.
1987-1991 INCLUDES [3DR130], (2) [S692] & [S653] 1ST DES.
1987-1995 130 LINKS STANDARD FINISH CHAIN 2ND DES.
1988-1995 130 LINKS FINE FINISH CHAIN
1987-1991 130 LINKS 1ST DES.
1987-1991 38 TEETH 1ST DES. (2) REQ.
1987-1995 38 TEETH 2ND DES. (2) REQ.
1987-1991 19 TEETH 1ST DES.
1987-1995 19 TEETH 2ND DES.
1987-1991 1ST DES.
1987-1995 2ND DES. 23MM WIDE- RIGHT HAND
1987-1995 2ND DES. 23MM WIDE- LEFT HAND
1987-1995 2ND DES. 23MM WIDE- UPPER
11
140 ENG - 1976-77 - 4 Cyl. - 3 1/2 Bore
12
2.4-T (146) DOHC ENG - 1996-01 - 4 Cyl. - 3.54 Bore
Belt
Cam Sprocket
Timing Kit
3-390SA
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-390S
390
S804T
S805
BT355
BT356
BG365
BG366
BG367
BG368
Chain Guide
13
B-012
S426
91 TEETH
36 TEETH
1997-2001 KIT INCLUDES [390], (2) [S804T], [S805], [BT355],
[BT356], [BG365], [BG366], [BG367]
INCLUDES [390], (2) [S804T], [S805]
130 LINKS
1996-2001 38 TEETH 2 REQUIRED
19 TEETH
1997-2001 TENSIONER ARM
1997-2001 HYDRAULIC (2ND DESIGN)
1996-2001 RIGHT HAND
1996-2001 LEFT HAND
1996-2001 UPPER
1996-1997 BAL SHAFT
151-1 ENG - 1978-79 - 4 Cyl. - 4.000 Bore (PONTIAC)
Gear Set
Cam Gear
Crank Gear
Cam Thrust Plate Spacer
2538S
2542S
2524
2542
2537
MG221
ALUM. INCLUDES [2524] & [2537]
FIBER INCLUDES [2542] & [2537]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
187
OLDSMOBILE (Continued)
Line
No.
14
Part Title
Gear Set
Crank Gear
Cam Thrust Plate Spacer
Gear Set
Crank Gear
Cam Thrust Plate Spacer
18
19
3pc Set
Chain
Gear Set
Crank Gear
Cam Thrust Plate Spacer
Cam Sprocket
Crank Sprocket
Chain Tensioner
2538S
2542S
2524
2542
2537
MG221
ALUM. INCLUDES [2524] & [2537]
FIBER INCLUDES [2542] & [2537]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
3-378SA
378
2538S
2542S
2524
2542
2537
MG221
S690
S713
BT220
1991-1992 INCLUDES [378], [S690] & [S713]
1991-1992 56 LINKS
1982-1986 ALUM. INCLUDES [2524] & [2537]
1982-1990 FIBER INCLUDES [2542] & [2537]
1982-1986 54 TEETH ALUMINUM
1982-1990 54 TEETH FIBER
1982-1990 27 TEETH
1991-1992 42 TEETH
1991-1992 21 TEETH
1991-1992
2.5-U (151) ENG - 1985-91 - 4 Cyl. - 4.000 Bore
3pc Set
Chain
Gear Set
Cam Gear
Crank Gear
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-378S
378
2544S
2544
2537
S690
S695
BT143
1990-1991 INCLUDES [378], [S690] & [S695]
1990-1991 56 LINKS
1985-1989 INCLUDES [2544] & [2537]
1985-1989 54 TEETH
1985-1989 27 TEETH
1990-1991 42 TEETH
1990-1991 21 TEETH
1990-1991
2.8-7 (173) ENG - 1980 - V6 - 89 MM Bore (CHEVROLET)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-373S
373
S506
S511
BD59
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
2.8-W (173) ENG - 1985-89 - V6 - 3.50 Bore (CHEVROLET)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Continued on Next Page
188
ALUM. INCLUDES [2524] & [2537]
FIBER INCLUDES [2542] & [2537]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
2.5-R (151) ENG - 1982-92 - 4 Cyl. - 4.000 Bore (PONTIAC)
Cam Gear
17
2538S
2542S
2524
2542
2537
MG221
2.5-5 (151) ENG - 1980-83 - 4 Cyl. - 4.000 Bore (PONTIAC)
Cam Gear
16
Description
151-V ENG - 1978-80 - 4 Cyl. - 4.000 Bore (PONTIAC)
Cam Gear
15
Part No
3-372S
3-372S
3-373S
373
385
385
S506
S620
S620
S511
S619
1985-1987 INCLUDES [385], [S620] & [S619] FIRENZA
1987-1989 INCLUDES [385], [S620] & [S619] CUTLASS CIERA
1986 INCLUDES [373], [S506] & [S511] CUTLASS CIERA
1986 64 LINKS CUTLASS CIERA
1985-1987 64 LINKS FIRENZA
1987-1989 64 LINKS CUTLASS CIERA
1986 40 TEETH CUTLASS CIERA
1985-1987 40 TEETH FIRENZA
1987-1989 40 TEETH CUTLASS CIERA
1986 20 TEETH CUTLASS CIERA
1985-1987 20 TEETH FIRENZA
OLDSMOBILE (Continued)
Line
No.
Part Title
Part No
Description
19
2.8-W (173) ENG - 1985-89 - V6 - 3.50 Bore (CHEVROLET) (Continued)
20
2.8-X (173) ENG - 1981-86 - V6 - 89 MM Bore (CHEVROLET)
21
2.8-Z (173) ENG - 1982-84 - V6 - 89 MM Bore (CHEVROLET)
22
23
Crank Sprocket
Damper
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
S619
BD131
BD131
BD59
3-373S
373
S506
S511
BD59
3-373S
373
S506
S511
BD59
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-359SB
359
CB100
S610
S323
BD44
BD45
26
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
INCLUDES [359], [S610] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
RIGHT HAND
LEFT HAND
3.0-L (181) ENG - 1985-88 - V6 - 3.800 Bore (W/MULTI PORT INJ.)
3pc Set
3-359SC
3-359SC
359
CB100
S610
S609
S621
25
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
3.0-E (181) ENG - 1982-85 - V6 - 3.800 Bore (W/2BC) (BUICK)
Chain
Cam Button
Cam Sprocket
Crank Sprocket
24
1987-1989 20 TEETH CUTLASS CIERA
1985-1986 FIRENZA
1987-1989
1986 CUTLASS CIERA
Damper
S621
BD58
1985 INCLUDES [359], [S610] & [S621] 2ND DES.
1986-1988 INCLUDES [359], [S610] & [S621]
54 LINKS
W/SPRING
40 TEETH
1985 20 TEETH 1ST DES. SPLINED DRIVE W/32MM THICK
BALANCER HUB
1985 20 TEETH 2ND DES. W/DOUBLE FLATS ON OUTSIDE OF
SPROCKET TO TURN OIL PUMP- 36MM THICK BALANCER HUB
1986-1988 20 TEETH
1985-1988 W/SPRING
3.1-T (189) OHV ENG - 1989-93 - V6 - 3.503 Bore (CAR)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-372S
385
S620
S619
BD131
INCLUDES [385], [S620] & [S619]
64 LINKS
40 TEETH
20 TEETH
3.1-D (189) ENG - 1990-94 - V6 - 3.503 Bore (SILHOUETTE VAN)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-372S
385
S620
S619
BD131
INCLUDES [385], [S620] & [S619]
64 LINKS
40 TEETH
20 TEETH
1990-1993
3.1-M (189) OHV ENG - 1993-99 - V6 - 3.50 Bore
Timing Kit
3-385SC
3-385SC
3-700SB
1993-1998 KIT INCLUDES [385], [S619], [S756], [BD336]
1999 KIT INCLUDES [385], [S619], [S756], [BD336] 1ST DES.
1999 KIT INCLUDES [700], [S847], [S848], [BD600] 2ND DES.
Continued on Next Page
189
OLDSMOBILE (Continued)
Line
No.
26
Part Title
3pc Set
3-385S
3-385S
Chain
385
385
700
S756
S756
S848
S619
S619
S847
BD336
BD600
Crank Sprocket
Damper
28
Timing Kit
3-385SC
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-385S
385
S756
S619
BD336
3pc Set
3-377S
3-377SA
377
CB300
S726
S621
BD295
BD295
BD58
1989-1990 INCLUDES [377], [S684] & [S691]
1991-1993 INCLUDES [377], [S726] & [S621]
54 LINKS
1989-1990
1991-1993 40 TEETH
20 TEETH
1989-1992 2ND DES. W/COUNTER- BORED DAMPER BOLT
HOLE
1993
1989-1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE
3.4-E (207) ENG - 1996-04 - V6 - 3.62 Bore (SILHOUETTE, ALERO)
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Damper
3-385SC
3-700SB
3-385S
3-700S
385
700
S756
S848
S619
S847
BD336
BD600
1996-1999 KIT INCLUDES [385], [S619], [S756], [BD336]
2000-2004 KIT INCLUDES [700], [S847], [S848], [BD600]
1996-1999 INCLUDES [385], [S756] & [S619]
2000-2004 INCLUDES [700], [S847], [S848]
1996-1999 64 LINKS
2000-2004 80 LINKS
1996-1999 40 TEETH
2000-2004 50 TEETH
1996-1999 20 TEETH
2000-2004 25 TEETH
1996-1999
2000-2004
3.4-X (207) DOHC ENG - 1991-96 - V6 - 3.62 Bore
3pc Set
Chain
Belt
Crank Sprocket
Continued on Next Page
190
KIT INCLUDES [385], [S619], [S756], [BD336] CALIFORNIA
EMISSIONS ONLY
INCLUDES [385], [S756] & [S619] CALIFORNIA EMISSIONS ONLY
64 LINKS CALIFORNIA EMISSIONS ONLY
40 TEETH CALIFORNIA EMISSIONS ONLY
20 TEETH CALIFORNIA EMISSIONS ONLY
1ST DES.; CALIFORNIA EMISSIONS ONLY
3.3-N (204) ENG - 1989-93 - V6 - 3.700 Bore
3pc Set
30
1993-1998 INCLUDES [385], [S756] & [S619]
1999 INCLUDES [385], [S756] & [S619] 1ST DES. W/64 LINK
CHAIN, 40 TOOTH CAM SPROCKET & 20 TOOTH CRANK
SPROCKET
1993-1998 64 LINKS
1999 64 LINKS 1ST DES.
1999 80 LINKS 2ND DES. W/79 LINKS
1993-1998 40 TEETH
1999 40 TEETH 1ST DES.
1999 50 TEETH 2ND DES.
1993-1998 20 TEETH
1999 20 TEETH 1ST DES.
1999 25 TEETH 2ND DES.
1ST DES.
1999 2ND DES.
3.1-J (189) ENG - 1999-99 - V6 - 3.500 Bore (CALIFORNIA EMISSIONS ONLY)
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
29
Description
3.1-M (189) OHV ENG - 1993-99 - V6 - 3.50 Bore (Continued)
Cam Sprocket
27
Part No
3-382S
382
B-0192
B-0273
S719
INCLUDES [382], [S719] & [S758]
64 LINKS CRANKSHAFT TO INTERMEDIATE SHAFT
1991-1995 169 TEETH INTERMEDIATE SHAFT TO CAMSHAFTS
1996 200 TEETH INTERMEDIATE SHAFT TO CAMSHAFTS
20 TEETH
OLDSMOBILE (Continued)
Line
No.
Part Title
Part No
Description
30
3.4-X (207) DOHC ENG - 1991-96 - V6 - 3.62 Bore (Continued)
31
215 ENG - 1961-63 - 8 Cyl. - 3 1/2 Bore (BUICK)
32
33
Intermediate Sprocket
Belt Tensioner
3pc Set
Chain
Cam Sprocket
Crank Sprocket
S758
BT308
3-359S
359
S334
S323
40 TEETH CHAIN DRIVE
CHAIN DRIVE
INCLUDES [359], [S334] & [S323]
54 LINKS
40 TEETH
20 TEETH
225 ENG - 1964-65 - V6 - 3 3/4 Bore (BUICK)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-359S
359
S334
S323
BD44
BD45
INCLUDES [359], [S334] & [S323]
54 LINKS
40 TEETH
20 TEETH
1964-1965 RIGHT HAND W/SPRING
1964-1965 LEFT HAND
231-2 ENG - 1979 - V6 - 3.78 Bore (CUTLASS VISTA
CRUISER,CALAIS,SALON,SUPREME,SUPREME BROGHAM)(BUICK ENG)
Chain
Cam Button
Crank Sprocket
Damper
359
CB100
S323
BD44
BD45
54 LINKS
W/SPRING
20 TEETH
RIGHT HAND W/SPRING
LEFT HAND
34
231-3 ENG - 1984-85 - V6 - 3.800 Bore (BUICK)
35
231-A ENG - 1977-87 - V6 - 3.800 Bore (BUICK)
36
37
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-359SB
359
S610
S323
BD44
3-359SB
359
CB100
S610
S323
BD44
BD45
1985 INCLUDES [359], [S610] & [S323]
54 LINKS
1985 40 TEETH
20 TEETH
1984-1985 RIGHT HAND W/SPRING
INCLUDES [359], [S610] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
1977-1987 RIGHT HAND W/SPRING
1977-1981 LEFT HAND
231-C ENG - 1975-77 - V6 - 3.78 Bore (BUICK-ODD FIRE)
3pc Set
3-359S
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
359
CB100
S334
S323
BD44
BD45
INCLUDES [359], [S334] & [S323] NON-INTEGRAL DIST. DRIVE
GEAR
54 LINKS
W/SPRING
40 TEETH
20 TEETH
RIGHT HAND; W/SPRING
LEFT HAND
3.8-1 (231) ENG - 1992-99 - V6 - 3.800 Bore
3pc Set
Chain
Cam Sprocket
3-375SA
3-381AS
3-381ASB
375
381A
S716
S810
1992-1994 INCLUDES [375], [S716] & [S729]
1995 INCLUDES [381A], [S810], [S811]
1996-1999 INCLUDES [381A], [S811] & [S812]
1992-1994 54 LINKS
1995-1999 64 LINKS
1992-1994 40 TEETH
1995 48 TEETH
Continued on Next Page
191
OLDSMOBILE (Continued)
Line
No.
37
Part Title
Part No
Description
3.8-1 (231) ENG - 1992-99 - V6 - 3.800 Bore (Continued)
Cam Sprocket
Crank Sprocket
Damper
S812
S729
S811
BD295
BD295
BD344
BD58
1996-2000 48 TEETH
1992-1994 20 TEETH
1995-1999 24 TEETH
1992 2ND DES. W/COUNTER- BORED DAMPER BOLT HOLE
1993-1994
1995-1999
1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE
38
3.8-3 (231) ENG - 1986-88 - V6 - 3.800 Bore
39
3.8-B (231) ENG - 1986 - V6 - 3.800 Bore
40
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-359SC
359
CB100
S610
S621
BD58
3-359SC
359
CB100
S610
S621
BD58
INCLUDES [359], [S610] & [S621]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
W/SPRING
INCLUDES [359], [S610] & [S621]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
W/SPRING
3.8-C (231) ENG - 1988-91 - V6 - 3.800 Bore
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-375S
3-375SA
375
CB300
S716
S718
S729
BD295
BD58
1988-1990 INCLUDES [375], [S718] & [S729]
1991 INCLUDES [375], [S716] & [S729]
54 LINKS
1988-1990
1991 40 TEETH
1988-1990 40 TEETH
20 TEETH
1988-1991 2ND DES. W/COUNTER- BORED DAMPER BOLT
HOLE
1988-1991 1ST DES. W/CHAMFERED DAMPER BOLT HOLE
41
3.8-K (231) ENG - 1995-99 - V6 - 3.800 Bore (M.F.I.)
42
3.8-L (231) ENG - 1991-95 - V6 - 3.800 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-381AS
381A
S810
S811
BD344
3-375SA
3-381AS
375
381A
S716
S810
S729
S811
BD295
BD295
BD344
BD58
192
INCLUDES [381A], [S810], [S811]
64 LINKS
48 TEETH
24 TEETH
1991-1994 INCLUDES [375], [S716] & [S729]
1995 INCLUDES [381A], [S810], [S811]
1991-1994 54 LINKS
1995 64 LINKS
1991-1994 40 TEETH
1995 48 TEETH
1991-1994 20 TEETH
1995 24 TEETH
1991-1992 2ND DES. W/COUNTER- BORED DAMPER BOLT
HOLE
1993-1994
1995
1991-1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE
OLDSMOBILE (Continued)
Line
No.
43
Part Title
Timing Kit
3-8MMSRH62S
Chain
8MMSRH126
8MMSRH62
S768
S780
S772
BT314
BD311
BD312
Intermediate Sprocket
Chain Tensioner
Damper
KIT INCLUDES: (2) [8MMSRH126], [8MMSRH62], [BD311],
[BD312],(2) [BT313], [BT314], [BG309],(2) [BG310] (NOTE: THIS
KIT DOES NOT CONTAIN SPROCKETS)
126 LINKS UPPER (2) REQ.
62 LINKS LOWER
40 TEETH RIGHT HAND
40 TEETH 2 REQ.; LEFT HAND
28/42 TEETH 28 & 42 TEETH
LOWER
LEFT HAND
RIGHT HAND
4.0-C (244) DOHC ENG - 1995-99 - 8 Cyl. - 3.43 Bore AURORA (1995-99)
Timing Kit
3-8MMSRH62S
3-8MMSRH62SA
Chain
Cam Sprocket
Crank Sprocket
Intermediate Sprocket
Chain Tensioner
Damper
Chain Guide
45
Description
4.0-C (244) DOHC ENG - 2001-03 - 8 Cyl. - 3.43 Bore AURORA
Cam Sprocket
44
Part No
8MMSRH126
8MMSRH62
S768
S770
S780
S795
S772
BT313
BT314
BD311
BD312
BG309
BG310
KIT INCLUDES: (2) [8MMSRH126], [8MMSRH62], [BD311],
[BD312],(2) [BT313], [BT314], [BG309],(2) [BG310] (NOTE: THIS
KIT DOES NOT CONTAIN SPROCKETS)
1995-1998 KIT INCLUDES: (2) [8MMSRH126], [8MMSRH62],
[BD311], [BD312],(2) [BT313], [BT314], [BG309],(2) [BG310],
[S768], [S770], [S772], (2) [S780], [S795] (NOTE: THIS KIT
CONTAINS SPROCKETS)
126 LINKS UPPER (2) REQ.
62 LINKS LOWER
1995-1998 40 TEETH INTAKE; RIGHT HAND
40 TEETH EXHAUST; RIGHT HAND
1995-1998 40 TEETH INTAKE & EXHAUST; LEFT HAND (2) REQ.
40 TEETH
28/42 TEETH 28 & 42 TEETH
UPPER (2) REQ.
LOWER
LEFT HAND
RIGHT HAND
LOWER LEFT
UPPER (2) REQ.
250 ENG - 1966-76 - 6 Cyl. - 3 7/8 Bore (CHEVROLET)
Gear Set
2525S
2538S
2538S
2540S
Cam Gear
Crank Gear
2524
2524
2526
2501
2537
Cam Thrust Plate Spacer
2537
MG221
1966-1975 INCLUDES [2524] & [2501] W/INT. MANIFOLD & CYL.
HEAD CAST SEPARATE
1975 ALUM. INCLUDES [2524] & [2537] W/INTAKE MANIFOLD
CAST AS INTEGRAL PART OF CYL. HEAD
1976 ALUM. INCLUDES [2524] & [2537] W/#71 STAMPED ON
OEM GEAR HUB
1976 INCLUDES [2526] & [2541] W/#20 STAMPED ON OEM
CRANK GEAR HUB
1966-1975 54 TEETH ALUMINUM
1976 54 TEETH ALUMINUM W/#14 STAMPED ON OEM GEAR
HUB
1976 54 TEETH W/#20 STAMPED ON OEM CRANK GEAR HUB
1966-1975 27 TEETH W/INT. MANIFOLD & CYL. HEAD CAST
SEPARATE
1975 27 TEETH W/INTAKE MANIFOLD CAST AS INTEGRAL
PART OF CYL. HEAD
1976 27 TEETH W/#71 STAMPED ON OEM GEAR HUB
193
OLDSMOBILE (Continued)
Line
No.
Part Title
Part No
Description
46
4.1-4 (252) ENG - 1981-84 - V6 - 3.965 Bore (BUICK)
47
4.2-S (256) DOHC ENG - 2002-04 - 6 Cyl. - 3.66 Bore (BRAVADA)
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-359SB
359
CB100
S610
S323
BD44
BD45
Timing Kit
3-195S
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
195
S908A
S913
BT5512
BG5504
BG5506
BG6006
INCLUDES [359], [S610] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
W/SPRING
LEFT HAND
INCLUDES [195], [S908A], [S913], [BT5512], [BG5504], [BG5506],
[BG6006]
168 LINKS
58 TEETH
29 TEETH
RIGHT HAND
LEFT HAND
UPPER
48
260-F & 8 ENG - 1975-82 - 8 Cyl. - 3.500 Bore
49
260-P DIESEL ENG - 1979 - 8 Cyl. - 3 1/2 Bore
50
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain
Crank Sprocket
3pc Set
3-509S
3-8MMSRH72S
Chain
Cam Sprocket
8MMSRH72
S776
S836
S505
S835
BT5452
Chain Tensioner
3pc Set
3-509S
3-509S
Chain
499
499
S776
S776
S505
S505
Crank Sprocket
194
48 LINKS
18 TEETH
1996-1998 INCLUDES [499], [S776] & [S505] W/BALANCE SHAFT
1999-2001 INCLUDES [8MMSRH72], [S835], [S836] USE [BT5452]
AND GM COVER #89017259 WITH THIS SET TO ELIMINATE
RATTLE.
1999-2001 72 LINKS
1996-1998 36 TEETH W/BALANCE SHAFT
1999-2001 56 TEETH
1996-1998 18 TEETH W/BALANCE SHAFT
1999-2001 28 TEETH
1999-2001 FOR USE WITH [3-8MMSRH72S] TO ELIMINATE
RATTLE. USE WITH GM COVER #89017259
4.3-W (262) ENG - 1992-94 - V6 - 4.000 Bore (BRAVADA)
Cam Sprocket
52
180
S503
INCLUDES [498], [S348] & [S349]
48 LINKS
36 TEETH
18 TEETH
4.3-W (262) ENG - 1996-01 - V6 - 4.00 Bore (BRAVADA)
Crank Sprocket
51
3-498SC
498
S348
S349
INCLUDES [499], [S776] & [S505] W/BALANCE SHAFT
1992-1993 INCLUDES [499], [S776] & [S505] WITHOUT BALANCE
SHAFT
46 LINKS W/BALANCE SHAFT
1992-1993 46 LINKS WITHOUT BALANCE SHAFT
36 TEETH W/BALANCE SHAFT
1992-1993 36 TEETH WITHOUT BALANCE SHAFT
18 TEETH W/BALANCE SHAFT
1992-1993 18 TEETH WITHOUT BALANCE SHAFT
4.3-Z (262) ENG - 1991-92 - V6 - 4.000 Bore (BRAVADA)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-506SB
499
S732
S505
INCLUDES [499], [S732] & [S505]
46 LINKS
36 TEETH
18 TEETH
OLDSMOBILE (Continued)
Line
No.
53
Part Title
Part No
Description
267 ENG - 1981-82 - 8 Cyl. - 3.500 Bore (CHEVROLET) (CANADIAN EXPORT)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-163S
3-499S
163
499
S288
S390
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
54
301-Y ENG - 1979 - 8 Cyl. - 4.000 Bore (PONTIAC)
55
303 ENG - 1949-53 - 8 Cyl. - 3 3/4 Bore
56
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain
373
INCLUDES [365], [S494] & [S495]
60 LINKS
42 TEETH
21 TEETH
64 LINKS
5.0 (305) ENG - 1982-87 - 8 Cyl. - 3.74 Bore (CHEVROLET ENG.)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
57
3-365S
365
S494
S495
3-163S
3-499S
163
499
S288
S390
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
5.0 (305) ENG - 1977-80 - 8 Cyl. - 3.74 Bore (CHEVROLET ENG.)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-163S
3-499S
163
499
S288
S390
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
1977-1980 INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
58
5.0-E (305) ENG - 1991-92 - 8 Cyl. - 3.736 Bore
59
5.0-Y,9 (307) ENG - 1980-90 - 8 Cyl. - 3.800 Bore (1983-87 5.0-9) (1980-90 5.0-Y)
60
61
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-506SC
499
S732
S391
3-498SC
498
S348
S349
INCLUDES [499], [S732] & [S391]
46 LINKS
36 TEETH
18 TEETH
INCLUDES [498], [S348] & [S349]
48 LINKS
36 TEETH
18 TEETH
324 ENG - 1954-56 - 8 Cyl. - 3 7/8 Bore
Chain
Crank Sprocket
494
S246
48 LINKS
18 TEETH
330 ENG - 1964-67 - 8 Cyl. - 3 15/16 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-498SC
498
S348
S349
INCLUDES [498], [S348] & [S349]
48 LINKS
36 TEETH
18 TEETH
195
OLDSMOBILE (Continued)
Line
No.
Part Title
Part No
Description
62
350-H,J ENG - 1973-76 - 8 Cyl. - 3.88 Bore (OMEGA ONLY) (NOT PRODUCED IN 1974)
63
350-H,K & R ENG - 1968-80 - 8 Cyl. - 4.06 Bore (350-H 1972-73) (350-K 1972-75) EXC. OMEGA
(350-R 1967-71, 1976-80) (OLDSMOBILE ENG)
64
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-359S
359
S334
S323
3-498SC
498
S348
S349
INCLUDES [359], [S334] & [S323]
54 LINKS
40 TEETH
20 TEETH
INCLUDES [498], [S348] & [S349]
48 LINKS
36 TEETH
18 TEETH
350-G & L ENG - 1977-79 - 8 Cyl. - 4.000 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-163S
3-499S
163
499
S288
S390
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
65
5.7 (350N) ENG - 1978-85 - 8 Cyl. - 4.00 Bore (DIESEL)
66
5.7-7 (350) ENG - 1992 - 8 Cyl. - 4.06 Bore (CUSTOM CRUISER) (CHEVROLET ENG)
67
68
69
70
71
72
Chain
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-506SC
499
S732
S391
48 LINKS
18 TEETH
INCLUDES [499], [S732] & [S391]
46 LINKS
36 TEETH
18 TEETH
371 ENG - 1957-60 - 8 Cyl. - 4.000 Bore
Chain
Cam Sprocket
Crank Sprocket
494
S344
S246
48 LINKS
1959-1960 36 TEETH
1957-1958 18 TEETH
394 ENG - 1959-64 - 8 Cyl. - 4 1/8 Bore
Chain
Cam Sprocket
Crank Sprocket
494
S344
S246
48 LINKS
36 TEETH
1961-1964 18 TEETH
400 ENG - 1965-69 - 8 Cyl. - 4.000 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-494SD
494
S360
S361
INCLUDES [494], [S360] & [S361]
48 LINKS
36 TEETH
18 TEETH
400 ENG - 1975 - 8 Cyl. - 4.12 Bore (PONTIAC)
3pc Set
Chain
3-350S
350
INCLUDES [350], [S305] & [S371]
60 LINKS
403 ENG - 1977-79 - 8 Cyl. - 4.351 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-498SC
498
S348
S349
INCLUDES [498], [S348] & [S349]
48 LINKS
36 TEETH
18 TEETH
425 ENG - 1965-67 - 8 Cyl. - 4 1/8 Bore
3pc Set
Chain
Continued on Next Page
196
180
S503
3-494SD
494
INCLUDES [494], [S360] & [S361]
48 LINKS
OLDSMOBILE (Continued)
Line
No.
Part Title
Part No
Description
72
425 ENG - 1965-67 - 8 Cyl. - 4 1/8 Bore (Continued)
73
455 ENG - 1968-76 - 8 Cyl. - 4 1/8 Bore
S360
S361
Cam Sprocket
Crank Sprocket
36 TEETH
18 TEETH
3-494SD
3-498SC
494
498
S348
S360
S349
S361
3pc Set
Chain
Cam Sprocket
Crank Sprocket
1968-1974 INCLUDES [494], [S360] & [S361]
1975-1976 INCLUDES [498], [S348] & [S349]
1968-1974 48 LINKS
1975-1976 48 LINKS
1975-1976 36 TEETH
1968-1974 36 TEETH
1975-1976 18 TEETH
1968-1974 18 TEETH
OLIVER TRACTOR
4 Cyl.
Engine
Year
Line
129
1
144
2
Line
No.
Part Title
6 Cyl.
Engine
Year
Line
216
3
F226 CONT.
4
231
5
Part No
Engine
6 Cyl. (Continued)
265
129 ENG - 4 Cyl. - 3 5/16 Bore (66HC & 66KD)
2
144 ENG - 4 Cyl. - 3 1/2 Bore (55HC, SUPER 55HC, SUPER 66HC & SUPER 66KD)
3
4
5
6
5401
5401
Crank Gear
Line
6
Description
1
Crank Gear
Year
30 TEETH
30 TEETH
216 ENG - 6 Cyl. - 3 1/2 Bore (SUPER 66D, SUPER 77D, 770D, SUPER 77HC, SUPER 77KD SUPER
88HC,88HC & 770)
5401
Crank Gear
30 TEETH
F226 CONT. ENG - 6 Cyl. - 3 5/16 Bore (AG6)
2603
2675
Crank Gear
Fan Drive Gear
24 TEETH
20 TEETH
231 ENG - 6 Cyl. - 3 1/2 Bore (88D, 88HC TO SER. 6502,999 & 1600 SER. 124420 TO 147568)
5401
Crank Gear
30 TEETH
265 ENG - 6 Cyl. - 3 3/4 Bore (SUPER 88D, SUPER 88HC AFTER SER. 6503,000, 88KD, 880D,
880HC AFTER SER. 60500,000 & 1650 AFTER SER. 147568)
5401
Crank Gear
30 TEETH
OPEL
4 Cyl.
Engine
1.5 (1492CC) OHC
Line
No.
1
Part Title
Year
1968
Line
Engine
Year
Line
Engine
Year
Line
1
Part No
Description
1.5 (1492CC) OHC ENG - 1968-68 - 4 Cyl. - 85 MM Bore (KADETT)
Belt Tensioner
BT10
197
PEUGEOT
Year
Line
1905CC SOHC
1989-91
1
2112CC OHV
1974-76
2
2155CC OHC
1987-90
3
4 Cyl.
Engine
Line
No.
Part Title
Engine
Year
Line
2304CC OHV
1977-84
4
2498CC OHV
1985-87
5
4 Cyl. (Continued)
Part No
Year
Line
2664CC OHC
1977-78
6
2839CC OHC
1979-80
7
2849CC OHC
1987-89
8
6 Cyl.
Description
1
1905CC SOHC ENG - 1989-91 - 4 Cyl. - 83 MM Bore (405,405DL,405S)
2
2112CC OHV ENG - 1974-76 - 4 Cyl. - 90 MM Bore (504D DIESEL)
3
4
5
6
B-0189
Belt
113 TEETH
3DR90
Chain
Engine
90 LINKS
2155CC OHC ENG - 1987-90 - 4 Cyl. - 88 MM Bore (505)
B-0111
Belt
116 TEETH
2304CC OHV ENG - 1977-84 - 4 Cyl. - 94 MM Bore (504,504D DIESEL) (604 TURBO DIESEL)
3DR90
Chain
90 LINKS
2498CC OHV ENG - 1985-87 - 4 Cyl. - 94 MM Bore (505D TURBO DIESEL)
3DR90
Chain
90 LINKS
2664CC OHC ENG - 1977-78 - V6 - 88 MM Bore (604)
3SR44
3SR94
Chain
44 LINKS OIL PUMP
94 LINKS CAMSHAFT (2) REQ.
7
2839CC OHC ENG - 1979-80 - V6 - 90.9 MM Bore (604)
8
2849CC OHC ENG - 1987-89 - V6 - 91 MM Bore (505)
3SR44
3SR94
Chain
44 LINKS OIL PUMP
94 LINKS CAMSHAFT (2) REQ.
3SR44
3SR94
Chain
44 LINKS OIL PUMP
94 LINKS CAMSHAFT (2) REQ.
PLYMOUTH
4 Cyl.
Engine
Year
Line
Engine
4 Cyl. (Continued)
Year
Line
8 Cyl.
Engine
Year
Line
1.4 SOHC
1979-84
1
2.2 (135) SOHC
1981-94
18
239
1955
34
1.5 (1500) OHC
1971-73
2
2.4-G (144) SOHC
1993-94
19
270
1956
35
1.5-A (Q1500)
1991-94
3
2.4-W (144) SOHC
1992
20
273
1965-69
36
1.5-K,P,X (1468CC)
1985-90
4
2.4-X ,B (148) DOHC
1996-00
21
5.2 (318) OHV
1958-89
37
1.6 (1597CC) DOHC
1989-90
5
2.5 (153) SOHC
1986-95
22
340
1968-73
38
1.6 (K1600) SOHC
1976-77
6
2.6 (2555) SOHC
1978-86
23
350
1958
39
1.6 (K1600) SOHC
1983-88
7
5.9 (360) OHV
1971-80
40
1.6 (Z1600) SOHC
1978-82
8
6 Cyl.
24
361
1959-66
41
42
170
1960-69
1.7 (1700) SOHC
1978-83
9
3.0-3 (181) SOHC
1987-00
25
383
1960-71
1.8-C,D (1834CC)
1992-94
10
198
1970-74
26
400
1972-78
43
1.8-T (107) SOHC
1989-90
11
3.3 (201) OHV
1990-00
27
413
1962
44
1.8-B,T (P1800) SOHC
1990-94
12
3.5-F (215) SOHC
1997
28
426 HEMI
1966-71
45
2.0 (A2000) SOHC
1984-91
13
3.5-G (215) SOHC
2000-01
29
426 WEDGE
1963-65
46
2.0 (U2000) SOHC
1976-79
14
3.7 (225)
1960-83
30
440
1966-78
47
2.0 (122) DOHC
1990-94
15
230
1946-59
31
2.0-C (122) SOHC
1995-01
16
230
1934-45
32
2.0-Y (122) DOHC
1995-99
17
3.8-L (230) OHV
1994-99
33
Line
No.
Part Title
Part No
Description
1
1.4 SOHC ENG - 1979-84 - 4 Cyl. - 74 MM Bore (CHAMP, COLT VIN CODE J,2,A)
2
1.5 (1500) OHC ENG - 1971-73 - 4 Cyl. - 86 MM Bore (CRICKET)
198
Belt
Belt Tensioner
Chain
B-073
BD33
3SR64
92 TEETH
64 LINKS
PLYMOUTH (Continued)
Line
No.
3
4
5
6
7
Part Title
Belt
10
11
12
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
92 TEETH
B-0128
B-073
S670
S633
BD33
1987-1990 92 TEETH
1985-1986 92 TEETH
1989-1990 40 TEETH VIN CODE X ONLY
1989-1990 20 TEETH VIN CODE X ONLY
1.6 (1597CC) DOHC ENG - 1989-90 - 4 Cyl. - 76.9 MM Bore (COLT GT) (MITSUBISHI ENG)
Belt
Belt Tensioner
B-0165
BT194
BT225
151 TEETH
BELT IDLER
BELT TENSIONER
1.6 (K1600) SOHC ENG - 1976-77 - 4 Cyl. - 76.9 MM Bore ARROW, COLT; W/O BALANCE SHAFT;
4G32 CANADA,G32B U.S.; MITSUBISHI ENG
Belt Tensioner
Belt Guide
BT56
BG53
1.6 (K1600) SOHC ENG - 1983-88 - 4 Cyl. - 76.9 Bore (COLT) (G32B U.S., 4G32 CANADA)
(MITSUBISHI ENG'S)
B-093
S8003
BD32
BT160
120 TEETH
24 TEETH 24 TEETH
1983 To 12/86
From 1/87 TO 1988
1.6 (K1600) SOHC ENG - 1978-82 - 4 Cyl. - 76.9 MM Bore (W/BALANCE SHAFT) (G32B MITSUBISHI
ENG)
B-013
S901
BD32
BD38
122 TEETH CAMSHAFT BELT
32 TEETH BALANCE SHAFT
CAMSHAFT BELT TENSIONER
BALANCE SHAFT BELT TENSIONER
1.7 (1700) SOHC ENG - 1978-83 - 4 Cyl. - 3.13 Bore
Belt
Crank Sprocket
Belt Tensioner
B-017
S411
BT148
121 TEETH
22 TEETH
1.8-C,D (1834CC) ENG - 1992-94 - 4 Cyl. - 3.19 Bore (W/O BALANCE SHAFT-16 VALVE COLT) (4G93
MITSUBISHI ENG)
Belt
B-0201
121 TEETH
1.8-T (107) SOHC ENG - 1989-90 - 4 Cyl. - 3.17 Bore (W/O BALANCE SHAFT) (COLT) (8 VALVE
4G37 MITSUBISHI ENG)
Belt
Belt Tensioner
B-093
BT160
120 TEETH
1.8-B,T (107) SOHC ENG - 1990-94 - 4 Cyl. - 3.17 Bore (W/ BALANCE SHAFT) (LASER) (8 VALVE
4G37 MITSUBISHI ENG)
Belt
Belt Tensioner
13
B-0191
1.5-K,P,X (1468CC) ENG - 1985-90 - 4 Cyl. - 75.5 MM Bore COLT(8V MITSUBISHI ENG)
Belt
Crank Sprocket
Belt Tensioner
9
Description
1.5-A (Q1500) ENG - 1991-94 - 4 Cyl. - 75.5 MM Bore (1991-94 1.5-A OHC 12 VALVE G15B U.S.,4G15
CANADA) (MITSUBISHI ENG'S)
Belt
Oil Pump Sprocket
Belt Tensioner
8
Part No
B-0158
B-090
BD38
BT160
122 TEETH CAMSHAFT
55 TEETH BALANCE SHAFT
BALANCE SHAFT
CAMSHAFT
2.0 (A2000) SOHC ENG - 1984-91 - 4 Cyl. - 85 MM Bore (W/BALANCE SHAFT) (G63B MITSUBISHI
ENG)
Belt
B-0158
B-089
From 10/1/86 TO 1991 122 TEETH CAMSHAFT
1984 To 10/1/86 122 TEETH CAMSHAFT
Continued on Next Page
199
PLYMOUTH (Continued)
Line
No.
13
Part Title
B-090
BT105
BT106
BT161
1984 To 3/1/88 55 TEETH BAL. SHAFT
CAMSHAFT
1984 To 5/87 BAL. SHAFT
From 6/87 TO 1991 BAL. SHAFT
2.0 (U2000) SOHC ENG - 1976-79 - 4 Cyl. - 84 MM Bore (W/BALANCE SHAFT-ARROW,ARROW
PICKUP,COLT) (G52B MITSUBISHI ENG)
Timing Kit
3-102S
3DR102-2
8MMSR90-1
Balance Shaft Elim. Kit
BSEK122
Chain
3DR102
8MMSR90
S407
S455
S567
BT49
BD30
BD31
BG48
BG51
BG64
Crank Sprocket
Balance Shaft Sprocket
Chain Tensioner
Chain Guide
15
Description
2.0 (A2000) SOHC ENG - 1984-91 - 4 Cyl. - 85 MM Bore (W/BALANCE SHAFT) (G63B MITSUBISHI
ENG) (Continued)
Belt
Belt Tensioner
14
Part No
1978-1979 KIT INCLUDES [3DR102-2] CAMSHAFT KIT &
[8MMSR90-1] BALANCE SHAFT KIT
KIT INCLUDES [3DR102], [S458], [S455], [BD31], [BD30] & [BT49]
(CAMSHAFT KIT)
1978-1979 KIT INCLUDES [8MMSR90], [S407], [S567] (2), [BG48],
[BG64] & [BG51] (BALANCE SHAFT KIT)
KIT INCLUDES CHAIN, OIL PUMP SHAFT PLUG, OIL GALLEY
PLUG, OIL PUMP MOUNTING GASKET AND INSTRUCTION
SHEET
102 LINKS CAMSHAFT CHAIN
90 LINKS BALANCE SHAFT CHAIN
34 TEETH OUTER
19 TEETH INNER
17 TEETH (2) REQ.
CAMSHAFT CHAIN TENSIONER
CAMSHAFT CHAIN GUIDE; TENSION SIDE
CAMSHAFT CHAIN GUIDE; SLACK SIDE
BALANCE SHAFT CHAIN GUIDE; LOWER LEFT
BALANCE SHAFT CHAIN GUIDE; LOWER RIGHT
1978-1979 BALANCE SHAFT CHAIN GUIDE; UPPER
2.0 (122) DOHC ENG - 1990-94 - 4 Cyl. - 85 MM Bore (LASER RS) (VIN R 1990-92 NON-TURBO)
(VIN U 1990-92 TURBO) (VIN E 1993-94 NON-TURBO) (VIN F 1993-94 TURBO)
Belt
Belt Tensioner
B-0167
B-0168
BT194
BT197
BT225
153 TEETH CAMSHAFT
65 TEETH BAL. SHAFT
CAMSHAFT
BAL. SHAFT
LOWER HYDRAULIC ADJUSTER; EXC. VIN CODE F
16
2.0-C (122) SOHC ENG - 1995-01 - 4 Cyl. - 3.45 Bore (1996-00 BREEZE) (1995-01 NEON)
17
2.0-Y (122) DOHC ENG - 1995-99 - 4 Cyl. - 3.44 Bore (NEON)
18
Belt
Belt
B-0246
112 TEETH
150 TEETH
2.2 (135) SOHC ENG - 1981-94 - 4 Cyl. - 3.444 Bore INCLUDES VANS
Chain
Belt
Cam Sprocket
Crank Sprocket
Balance Shaft Sprocket
Belt Tensioner
Chain Tensioner
200
B-0245
201
B-0153
B-071
S616
S417
S640
S642
BT192
BT91
BT298
1990-1994 60 LINKS BALANCE SHAFT
1989-1994 124 TEETH CAMSHAFT
1981-1988 124 TEETH CAMSHAFT
1981-1988 40 TEETH
1981-1987 20 TEETH BELT
1990-1994 36 TEETH BAL. SHAFT
1990-1994 18 TEETH
1989-1994 CAMSHAFT BELT TENSIONER
1981-1988 CAMSHAFT BELT TENSIONER
1990-1994 BAL. SHAFT
PLYMOUTH (Continued)
Line
No.
19
Part Title
21
22
Belt Tensioner
B-0168
B-0230
BT197
65 TEETH BAL. SHAFT
124 TEETH CAMSHAFT
BAL. SHAFT
2.4-W (144) SOHC ENG - 1992 - 4 Cyl. - 86.5 MM Bore (COLT VISTA) (G64B MITSUBISHI ENG)
Belt
Belt Tensioner
B-0204
BT106
BT196
1992 123 TEETH CAMSHAFT
BALANCE SHAFT
CAMSHAFT
2.4-X ,B (148) DOHC ENG - 1996-00 - 4 Cyl. - 3.44 Bore (1996-00 BREEZE) (1996-00 VOYAGER,
1996-97 GRAND VOYAGER)
Chain
Belt
Balance Shaft Sprocket
Chain Tensioner
Chain Guide
201
B-0265
S642
BT298
BG297
60 LINKS BALANCE SHAFT
146 TEETH CAMSHAFT TIMING BELT
18 TEETH LOWER
BAL. SHAFT
BAL. SHAFT; LOWER
2.5 (153) SOHC ENG - 1986-95 - 4 Cyl. - 3.444 Bore INCLUDES VANS
Timing Kit
Chain
Belt
Cam Sprocket
Crank Sprocket
Balance Shaft Sprocket
Belt Tensioner
23
Description
2.4-G (144) SOHC ENG - 1993-94 - 4 Cyl. - 86.5 MM Bore (COLT VISTA,VISTA SE) (MITSUBISHI
ENG)
Belt
20
Part No
Chain Tensioner
Chain Guide
B-0114-1
201
B-0114
B-0132
B-0153
S714
S640
S709
S642
BT192
BT94
BT298
BG297
1986-1987 KIT INCLUDES [B-0114], (2) [S714] & [S709]
1986-1995 60 LINKS BALANCE SHAFT
1986-1987 126 TEETH CAMSHAFT
1988 126 TEETH CAMSHAFT
1989-1995 124 TEETH CAMSHAFT
1986-1987 40 TEETH
1986-1995 36 TEETH CHAIN
1986-1987 20 TEETH BELT
18 TEETH
1989-1995 BELT
1986-1988 BELT
1986-1995 BAL. SHAFT
BAL. SHAFT
2.6 (2555) SOHC ENG - 1978-86 - 4 Cyl. - 91.1 MM Bore (W/BALANCE SHAFT) (INCLUDES
TRUCKS) (G54B MITSUBISHI ENG)
Timing Kit
3-102S
3DR102-2
8MMSR90-1
Balance Shaft Elim. Kit
BSEK122
Chain
3DR102
8MMSR90
S407
S455
S567
BT49
BD30
BD31
BG48
BG51
BG64
Crank Sprocket
Balance Shaft Sprocket
Chain Tensioner
Chain Guide
KIT INCLUDES [3DR102-2] CAMSHAFT KIT & [8MMSR90-1]
BALANCE SHAFT KIT
KIT INCLUDES [3DR102], [S458], [S455], [BD31], [BD30] & [BT49]
(CAMSHAFT KIT)
KIT INCLUDES [8MMSR90], [S407], [S567] (2), [BG48], [BG64] &
[BG51] (BALANCE SHAFT KIT)
KIT INCLUDES CHAIN, OIL PUMP SHAFT PLUG, OIL GALLEY
PLUG, OIL PUMP MOUNTING GASKET AND INSTRUCTION
SHEET
102 LINKS CAMSHAFT
90 LINKS BAL. SHAFT
34 TEETH OUTER
19 TEETH INNER
17 TEETH (2) REQ.
SLEEVE
CAMSHAFT; TENSION SIDE
CAMSHAFT; SLACK SIDE
BALANCE SHAFT; LEFT HAND
BALANCE SHAFT; LOWER RIGHT
BALANCE SHAFT; RIGHT HAND
201
PLYMOUTH (Continued)
Line
No.
Part Title
Part No
Description
24
170 ENG - 1960-69 - 6 Cyl. - 3.400 Bore
25
3.0-3 (181) SOHC ENG - 1987-00 - V6 - 3.587 Bore (INCLUDES MINIVANS) (6G72 MITSUBISHI ENG)
26
27
28
3pc Set
Chain
Crank Sprocket
Belt
Belt Tensioner
3-495S
495
S291
B-0139
BT195
INCLUDES [495], [S314] & [S291]
50 LINKS
19 TEETH
149 TEETH
198 ENG - 1970-74 - 6 Cyl. - 3.400 Bore
3pc Set
Chain
Crank Sprocket
3-495S
495
S291
INCLUDES [495], [S314] & [S291]
50 LINKS
19 TEETH
3.3 (201) OHV ENG - 1990-00 - V6 - 3.66 Bore (VIN "R" GAS 1990-00) (VIN "J" CNG 1994-96 CNG)
(VIN "G" 1998-00 FLEX) VOYAGER, GRAND VOYAGER
Cam Thrust Plate
3pc Set
MD100
3-388S
Chain
388
Cam Sprocket
S788
Crank Sprocket
S715
.297 PLATE THICKNESS FOR USE W/S788 CAM SPROCKET
INCLUDES [388], [S788] & [S715] KIT CONTAINS SOFTBACK
CHAIN. REQUIRES BOLT ON SNUBBER (NOT PROVIDED)
64 LINKS SOFTBACK CHAIN. REQUIRES BOLT ON SNUBBER
(NOT PROVIDED)
40 TEETH USE NEW THRUST PLATE SUPPLIED W/THIS
SPROCKET
20 TEETH
3.5-F (215) SOHC ENG - 1997 - V6 - 3.78 Bore
Belt
Belt Tensioner
B-0255
BT357
1997 202 TEETH
1997 PULLEY ONLY. DOES NOT INCLUDE BRACKET AND
HYDRAULIC TENSIONER
29
3.5-G (215) SOHC ENG - 2000-01 - V6 - 3.78 Bore
30
3.7 (225) ENG - 1960-83 - 6 Cyl. - 3.400 Bore
31
230 ENG - 1946-59 - 6 Cyl. - 3.25 Bore (BELVEDERE, FURY, PLAZA, SAVOY, SUBURBAN) L-HEAD
Belt
Belt Tensioner
3pc Set
Chain
Crank Sprocket
Cam Sprocket
Crank Sprocket
B-0295
BT357
3-495S
495
S291
S265
S127
S266
201 TEETH
TENSIONER PULLEY ONLY; DOES NOT INCLUDE BRACKET
AND HYDRAULIC TENSIONER
INCLUDES [495], [S314] & [S291]
50 LINKS
19 TEETH
1955-1959 38 TEETH
1946-1954 19 TEETH
1955-1959 19 TEETH
32
230 ENG - 1934-45 - 6 Cyl. - 3.25 Bore
33
3.8-L (230) OHV ENG - 1994-99 - V6 - 3.78 Bore (INCLUDES MINIVAN)
34
202
Crank Sprocket
S127
Cam Thrust Plate
3pc Set
MD100
3-388S
Chain
388
Cam Sprocket
S788
Crank Sprocket
S715
19 TEETH
.297 PLATE THICKNESS FOR USE W/S788 CAM SPROCKET
INCLUDES [388], [S788] & [S715] KIT CONTAINS SOFTBACK
CHAIN. REQUIRES BOLT ON SNUBBER (NOT PROVIDED)
64 LINKS SOFTBACK CHAIN. REQUIRES BOLT ON SNUBBER
(NOT PROVIDED)
40 TEETH USE NEW THRUST PLATE SUPPLIED W/THIS
SPROCKET
20 TEETH
239 ENG - 1955-55 - 8 Cyl. - 3 7/16 Bore (BELVEDERE, PLAZA, SAVOY, SUBURBAN)
Crank Sprocket
S127
19 TEETH
PLYMOUTH (Continued)
Line
No.
Part Title
Part No
Description
35
270 ENG - 1956 - 8 Cyl. - 3.63 Bore (BELVEDERE, FURY, PLAZA, SAVOY, SUBURBAN)
36
273 ENG - 1965-69 - 8 Cyl. - 3 5/8 Bore
37
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
348
S273
S274
3-361S
361
S358
S359
3pc Set
3-160S
3-361S
Chain
160
160
348
361
Cam Sprocket
S273
S358
Crank Sprocket
S402
S402
S274
S297
S297
S359
38
340 ENG - 1968-73 - 8 Cyl. - 4.04 Bore
39
350 ENG - 1958 - 8 Cyl. - 4 1/16 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain
Crank Sprocket
3-160S
160
S402
S297
495
S291
1965-1988 INCLUDES [160], [S402] & [S297] HEAVY DUTY
ROLLER CHAIN SET
1989 INCLUDES [160], [S402] & [S297] STANDARD DUTY
ROLLER SET
1965-1988 INCLUDES [361], [S358] & [S359] STANDARD DUTY
CHAIN SET; CAR APPLICATIONS ONLY
1965-1988 68 LINKS HEAVY DUTY ROLLER CHAIN
1989 68 LINKS STANDARD DUTY ROLLER CHAIN
1960-1964 68 LINKS STANDARD DUTY
1965-1988 68 LINKS STANDARD DUTY; CAR APPLICATIONS
ONLY; EXC. HI PERF.
1960-1964 46 TEETH STANDARD DUTY; USE W/348 CHAIN
1965-1988 46 TEETH STANDARD DUTY; USE W/361 CHAIN;
CAR APPLICATIONS ONLY; EXC. HI PERF.
1965-1988 46 TEETH HEAVY DUTY; USE W/160 CHAIN
1989 46 TEETH STANDARD DUTY; USE W/160 CHAIN
1960-1964 23 TEETH STANDARD DUTY; USE W/348 CHAIN
1965-1988 23 TEETH HEAVY DUTY; USE W/160 CHAIN
1989 23 TEETH STANDARD DUTY; USE W/160 CHAIN
1965-1988 23 TEETH STANDARD DUTY; USE W/361 CHAIN;
CAR APPLICATIONS ONLY
INCLUDES [160], [S402] & [S297]
68 LINKS
46 TEETH
23 TEETH
50 LINKS
19 TEETH
5.9 (360) OHV ENG - 1971-80 - 8 Cyl. - 4.00 Bore (INCLUDES TRAILDUSTER & PB SERIES VANS)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
41
INCLUDES [361], [S358] & [S359]
68 LINKS
46 TEETH
23 TEETH
5.2 (318) OHV ENG - 1958-89 - 8 Cyl. - 3.91 Bore (INCLUDES TRAILDUSTER AND PB SERIES VANS)
3-160S
40
68 LINKS
46 TEETH
23 TEETH
3-160S
3-361S
160
361
S358
S402
S297
S359
INCLUDES [160], [S402] & [S297] HEAVY DUTY
INCLUDES [361], [S358] & [S359] STANDARD DUTY
68 LINKS HEAVY DUTY CHAIN
68 LINKS STANDARD DUTY CHAIN
46 TEETH USE W/ 361 STANDARD DUTY CHAIN
46 TEETH USE W/ 160 HEAVY DUTY CHAIN
23 TEETH USE W/ 160 HEAVY DUTY CHAIN
23 TEETH USE W/ 361 STANDARD DUTY CHAIN
361 ENG - 1959-66 - 8 Cyl. - 4 1/8 Bore
Chain
Cam Sprocket
Crank Sprocket
168
495
S340
S291
66 LINKS HEAVY DUTY
50 LINKS STANDARD DUTY
50 TEETH HEAVY DUTY; USE W/ 3 BOLT CAM
19 TEETH STANDARD DUTY
Continued on Next Page
203
PLYMOUTH (Continued)
Line
No.
Part Title
Part No
Description
41
361 ENG - 1959-66 - 8 Cyl. - 4 1/8 Bore (Continued)
42
383 ENG - 1960-71 - 8 Cyl. - 4.25 Bore
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
43
S339
3-168SA
3-501SA
168
495
501
S366
S380
S291
S339
S367
25 TEETH HEAVY DUTY
INCLUDES [168], [S380] & [S339] HEAVY DUTY
1966-1971 INCLUDES [501], [S366] & [S367] STANDARD DUTY
66 LINKS HEAVY DUTY
1960-1965 50 LINKS STANDARD DUTY
1966-1971 50 LINKS STANDARD DUTY
1966-1971 38 TEETH STANDARD DUTY
50 TEETH HEAVY DUTY
1960-1965 19 TEETH STANDARD DUTY
25 TEETH HEAVY DUTY
1966-1971 19 TEETH STANDARD DUTY
400 ENG - 1972-78 - 8 Cyl. - 4.342 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-168SA
3-501SA
168
501
S366
S380
S339
S367
INCLUDES [168], [S380] & [S339] HEAVY DUTY
INCLUDES [501], [S366] & [S367] STANDARD DUTY
66 LINKS HEAVY DUTY
50 LINKS STANDARD DUTY
38 TEETH STANDARD DUTY
50 TEETH HEAVY DUTY
25 TEETH HEAVY DUTY
19 TEETH STANDARD DUTY
44
413 ENG - 1962 - 8 Cyl. - 4 3/16 Bore
45
426 HEMI ENG - 1966-71 - 8 Cyl. - 4 1/4 Bore
46
Chain
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-168S
168
S340
S339
3pc Set
Chain
3-168SA
168
495
S380
S291
S339
INCLUDES [168], [S340] & [S339]
66 LINKS
50 TEETH USE W/ 3 BOLT CAM
25 TEETH
INCLUDES [168], [S380] & [S339] H.D.
66 LINKS H.D.
50 LINKS
50 TEETH H.D.
19 TEETH
25 TEETH H.D.
440 ENG - 1966-78 - 8 Cyl. - 4.32 Bore (INCLUDES TRUCKS & VANS)
3pc Set
3-168S
3-168SA
3-501SA
Chain
Cam Sprocket
Crank Sprocket
204
50 LINKS
19 TEETH
426 WEDGE ENG - 1963-65 - 8 Cyl. - 4 1/4 Bore
Cam Sprocket
Crank Sprocket
47
495
S291
168
501
S340
S366
S380
S339
S367
1969-1972 INCLUDES [168], [S340] & [S339] HEAVY DUTY; USE
W/3 BOLT CAM & STOCK 3X2BC
INCLUDES [168], [S380] & [S339] HEAVY DUTY; USE W/SINGLE
BOLT CAM
INCLUDES [501], [S366] & [S367] STANDARD DUTY; EXC. HI
PERF. ENG.
66 LINKS HEAVY DUTY
50 LINKS STANDARD DUTY; EXC. HI PERF. ENG.
1969-1972 50 TEETH HEAVY DUTY; USE W/3 BOLT CAM;
W/STOCK 3X2BC
38 TEETH STANDARD DUTY; EXC. HI PERF. ENG.
50 TEETH HEAVY DUTY; SINGLE BOLT CAM
25 TEETH HEAVY DUTY
19 TEETH STANDARD DUTY; EXC. HI PERF. ENG.
PONTIAC
4 Cyl.
Engine
Year
Line
Engine
6 Cyl. (Continued)
Year
Line
1.6-6 (98) SOHC
1988-93
1
3.1-T (189)
1988-94
42
1.6-C,9 (98) SOHC
1981-87
2
3.1-V (189)
1989-90
43
1.6-6,E (98) DOHC
2005-10
3
1.8-D (110)
1981-86
4
4 Cyl.
1.8-0 (112) OHC
1982-86
5
1.8-J (112) OHC
1984-86
6
1.8-8 (1794CC) DOHC
2003-08
2.0-B (121)
1983
2.0-H (121) OHC
1992-94
9
2.0-P OHV (122)
1983-86
2.0-K (122) SOHC
2.0-M (122) OHC
3.2 (195) OHV
Engine
Year
Line
301-W
1978-81
74
301-Y
1977-79
75
4.9-T (301)
1980-81
76
5.0 (305)
1977-92
77
8 Cyl. (Continued)
1961-63
44
307
1971-72
78
3.3-N (204)
1992-93
45
5.0-Y (307) OHV
1986-89
79
7
3.4-S (207)
1993-95
46
5.0-Y (307) OHV
1981
80
8
3.4-E (207)
1996-05
47
316
1956
81
10
3.4-X (207) DOHC
1991-96
48
1987-91
11
1987-90
12
6 Cyl.
3.4-F (207) OHV
2006-09
49
2.0-X (122) DOHC
2007-09
13
3.5-L,8 (213) OHV
2005-06
2.2-4 (134) OHV
1995-02
14
3.5-K,N (213) INCLUDES
2007-10
2.2-F,H (134) DOHC
2002-10
15
FLEX FUEL
2.3-3 (138) SOHC
1992-94
16
215
2.3-A (138) DOHC
1989-94
17
2.3-D (138) DOHC
1988-95
18
8 Cyl.
140
1975-77
19
2.4-B,0 (145) DOHC
2006-10
20
2.4-T (146) DOHC
1996-02
151-1
6 Cyl.
5.3-C (323) OHV
2005-08
82
326
1963-67
83
347
1957
84
350
1968-71
85
50
350
1972-76
86
51
350-X OHV
1978-80
87
350-H,J OHV
1975-76
88
350-L
1977-79
89
1964-65
52
1961-62
53
3.6-7 (217) DOHC
2007-09
54
21
229-9
1980-81
1978-79
22
231-2
151-9
1979
23
151-V
1977-80
2.5-2 (151)
350-P OHV
1976-77
90
350-R
1977-80
91
5.7 (350N)
1980-85
92
5.7-8 (350)
1987-92
93
55
5.7-G (350) OHV
1998-02
94
1979
56
5.7-P (350)
1993-97
95
231-A
1977-87
57
5.7 (350) OHV
2004
96
24
231-C
1976-77
58
6.0-U (364) OHV
2005-06
97
1982-86
25
3.8-1 (231) OHV
1992-03
59
6.0-Y (364) OHV
2008-09
98
2.5-5 (151)
1980-83
26
3.8-2,4 (231) OHV
2004-08
60
6.1 (370) OHV ENG
1958
99
2.5-F (151)
1982-83
27
3.8-3 (231)
1987-88
61
6.2-W (376) OHV
2009
100
2.5-R (151)
1982-91
28
3.8-7 (231)
1989
62
389
1959-66
101
2.5-U (151)
1985-91
29
3.8-C (231)
1988-91
63
400
1977-79
102
3.8-K (231)
1995-05
64
400
1973-76
103
30
3.8-L (231)
1992-95
65
400
1972
104
6 Cyl.
2.8-1 (173)
1982-84
215
6 Cyl.
2.8-7 (173)
1980
31
3.9-1,W (237) OHV
2006-09
66
400
1971
105
2.8-9 (173)
1985-88
32
250 OHV
1970-76
67
400
1970
106
2.8-L (173)
1983-84
33
4.1-4 (252)
1982
68
400
1969
107
2.8-S (173)
1985-89
34
400
1968
108
2.8-W (173)
1985-89
35
8 Cyl.
400
1967
109
2.8-X (173)
1981-86
36
403
1977-79
110
2.8-Z (173)
1982-84
37
4.3-Z (262)
421
1963-66
111
3.0-L (181)
1985-87
38
428
1967-69
112
3.1-D (189)
1990-95
39
8 Cyl.
4.3-S (265)
1980-81
71
455 OHV
1970-76
113
3.1-J (189)
2000-03
40
267-J
1979-82
72
3.1-M (189) OHV
1994-99
41
287
1955
73
Line
No.
Part Title
260-F
1975-76
1985-87
69
70
Part No
Description
1
1.6-6 (98) SOHC ENG - 1988-93 - 4 Cyl. - 3.11 Bore (OPEL ENG)
2
1.6-C,9 (98) SOHC ENG - 1981-87 - 4 Cyl. - 3.23 Bore (CHEVROLET) (1981 1.6-9) (1982-87 1.6-C)
Belt
Belt
Crank Sprocket
B-0148
B-0148
B-0203
B-0203
B-061
S611
1988-1989 104 TEETH
1990 104 TEETH 1ST DES.
1990 111 TEETH 2ND DES.
1991-1993 111 TEETH
100 TEETH
19 TEETH W/SPACER ATTACHED
205
PONTIAC (Continued)
Line
No.
Part Title
Part No
Description
3
1.6-6,E (98) DOHC ENG - 2005-10 - 4 Cyl. - 3.11 Bore (G3,G3WAVE,WAVE,WAVE5)
4
1.8-D (110) ENG - 1981-86 - 4 Cyl. - 3.307 Bore ACADIAN CANADA ONLY (DIESEL)
5
6
7
Belt
Belt
Belt Guide
B-0310
B-076
BG94
2005 127 TEETH
134 TEETH
1.8-0 (112) OHC ENG - 1982-86 - 4 Cyl. - 3.346 Bore (T.B.I.) (BRAZILIAN ENG)
Belt
B-081
111 TEETH
1.8-J (112) OHC ENG - 1984-86 - 4 Cyl. - 3.346 Bore (TURBO) (BRAZILIAN ENG)
Belt
B-081
111 TEETH
1.8-8 (1794CC) DOHC ENG - 2003-08- 4 Cyl. - 79 MM Bore (VIBE BASE MODEL) 1ZZFE TOYOTA
ENGINE
Timing Kit
3-4200SA
2003-2008 SOLD AS KIT ONLY; KIT INCLUDES (1) CHAIN,(1)
TENSIONER,(2) GUIDES,(1) CAM SPROCKET,(1) CRANK
SPROCKET, (1) SEAL, (2) SHIMS, (1) PIVOT BOLT
8
2.0-B (122) ENG - 1983 - 4 Cyl. - 3.504 Bore (J2000)(CHEVROLET ENG) CANADA
9
2.0-H (121) OHC ENG - 1992-94 - 4 Cyl. - 3.385 Bore (BRAZILIAN ENG)
10
11
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Belt
3-370S
395
S558
S549
BT5115
B-0163
INCLUDES [395], [S558], [S549] & [MPC-393]
58 LINKS
40 TEETH
20 TEETH
125 TEETH
2.0-P OHV (122) ENG - 1983-86 - 4 Cyl. - 3.39 Bore (J2000,J2000 SUNBIRD,SUNBIRD)(TBI)
(CHEVROLET ENG)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-370S
395
S558
S549
BT5115
INCLUDES [395], [S558], [S549] & [MPC-393]
58 LINKS
40 TEETH
20 TEETH
2.0-K (122) SOHC ENG - 1987-91 - 4 Cyl. - 3.39 Bore (1987-89 E.F.I.) (1990-91 T.B.I.) (OPEL ENG)
Belt
B-0163
B-081
1989-1991 125 TEETH
1987-1988 111 TEETH
12
2.0-M (122) OHC ENG - 1987-90 - 4 Cyl. - 3.385 Bore (M.F.I. TURBO) (BRAZILIAN ENG)
13
2.0-X (122) DOHC ENG - 2007-09 - 4 Cyl. - 3.38 Bore (SOLSTICE) ECOTEC
Belt
Timing Kit
3-4201SX
Oil Jet Nozzle
Chain
5467N
4201F
4202F
S849
S851
S911
BT5383
BT5481
Crank Sprocket
Water Pump Sprocket
Chain Tensioner
Chain Guide
Continued on Next Page
206
B-0163
B-081
BG5375
BG5381
BG5382
BG5384
BG5385
1989-1990 125 TEETH
1987-1988 111 TEETH
KIT INCLUDES [4201F], [BT5481], [BG5375], [BG5381], [BG5382],
[5467N] (DOES NOT INCLUDE SPROCKETS) TIMING CHAIN KIT
148 LINKS CAMSHAFT CHAIN
134 LINKS BALANCE SHAFT CHAIN
23 TEETH OUTER SPROCKET
42 TEETH INNER SPROCKET
40 TEETH
BALANCE SHAFT CHAIN TENSIONER; LOWER
NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mm O.A.L
CAMSHAFT CHAIN TENSIONER; RIGHT HAND UPPER
CAMSHAFT CHAIN GUIDE; RIGHT HAND
CAMSHAFT CHAIN GUIDE; LEFT HAND
CAMSHAFT CHAIN GUIDE; CENTER UPPER
BALANCE SHAFT CHAIN GUIDE; RIGHT HAND LOWER
BALANCE SHAFT CHAIN GUIDE; LEFT HAND LOWER
PONTIAC (Continued)
Line
No.
Part Title
Part No
Description
13
2.0-X (122) DOHC ENG - 2007-09 - 4 Cyl. - 3.38 Bore (SOLSTICE) ECOTEC (Continued)
14
2.2-4 (134) OHV ENG - 1995-02 - 4 Cyl. - 3.500 Bore (SUNFIRE)
15
Chain Guide
BG5386
3pc Set
3-370SA
3-395S
Chain
Cam Thrust Plate Spacer
Cam Sprocket
Crank Sprocket
Chain Tensioner
395
MG221
S774
S549
BT5115
3-4201S
3-4201SX
3-4202S
Oil Jet Nozzle
Camshaft Bolt
Chain
Cam Sprocket
Crank Sprocket
Balance Shaft Sprocket
Water Pump Sprocket
Chain Tensioner
Chain Guide
5467N
5496B
4201F
4202F
S850
S849
S851
S853
S855
S911
BT5383
BT5481
BG5375
BG5381
BG5382
BG5384
BG5385
BG5386
KIT INCLUDES [4201F], (2) [S850], [S849], [BT5481], [BG5375],
[BG5381], [BG5382], [5467N], (2) [5496B] (INCLUDES
SPROCKETS) TIMING CHAIN KIT
KIT INCLUDES [4201F], [BT5481], [BG5375], [BG5381], [BG5382],
[5467N] (DOES NOT INCLUDE SPROCKETS) TIMING CHAIN KIT
2002-2008 KIT INCLUDES [4202F], [S853], [S855], [S851],
[BT5383], [BG5384], [BG5385], [BG5386] BALANCE SHAFT
CHAIN KIT
TORQUE TO YIELD BOLT 2 REQUIRED
148 LINKS CAMSHAFT CHAIN
134 LINKS BALANCE SHAFT CHAIN
46 TEETH 2 REQUIRED; CAMSHAFT CHAIN SPROCKET
23 TEETH OUTER SPROCKET
42 TEETH INNER SPROCKET
2002-2008 21 TEETH LEFT HAND; INTAKE
2002-2008 21 TEETH RIGHT HAND; EXHAUST
40 TEETH
BALANCE SHAFT CHAIN TENSIONER; LOWER
NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mm O.A.L
CAMSHAFT CHAIN TENSIONER; RIGHT HAND UPPER
CAMSHAFT CHAIN GUIDE; RIGHT HAND
CAMSHAFT CHAIN GUIDE; LEFT HAND
CAMSHAFT CHAIN GUIDE; CENTER UPPER
BALANCE SHAFT CHAIN GUIDE; RIGHT HAND LOWER
BALANCE SHAFT CHAIN; LEFT HAND LOWER
BALANCE SHAFT CHAIN GUIDE; UPPER
2.3-3 (138) SOHC ENG - 1992-94 - 4 Cyl. - 3.62 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Guide
17
INCLUDES [395], [S774], [S549] & [MPC-393]
INCLUDES [370], [S774], [S549], [BT5115] & [MPC-393] RETRO
FIT FINE FINISH CHAIN SET, CHECK FOR POSSIBLE OILING
PROBLEM WHEN INSTALLING SET.
58 LINKS
1995-1996
40 TEETH
20 TEETH
FOR USE WITH BOTH [370] AND [395] CHAINS
2.2-F,H (134) DOHC ENG - 2002-10 - 4 Cyl. - 3.39 MM Bore (G5,GRAND AM,PURSUIT,SUNFIRE)
ECOTEC
Timing Kit
16
BALANCE SHAFT CHAIN GUIDE; UPPER
3-384S
384
384M
S734
S747
BG305
BG307
INCLUDES [384], [S734] & [S747]
124 LINKS
124 LINKS FINE FINISH
38 TEETH
19 TEETH
LEFT HAND
RIGHT HAND
2.3-A (138) DOHC ENG - 1989-94 - 4 Cyl. - 3.62 Bore
3pc Set
Chain
3-383S
3-3DR130
383
1992-1994 INCLUDES [383], (2) [S734] & [S747] 2ND DES.
1989-1991 INCLUDES [3DR130], (2) [S692] & [S653] 1ST DES.
1989-1994 130 LINKS STANDARD FINISH CHAIN 2ND DES.
Continued on Next Page
207
PONTIAC (Continued)
Line
No.
17
Part Title
Description
2.3-A (138) DOHC ENG - 1989-94 - 4 Cyl. - 3.62 Bore (Continued)
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
18
Part No
383M
3DR130
S692
S734
S653
S747
BT188
BG304
BG305
BG306
130 LINKS FINE FINISH CHAIN
1989-1991 130 LINKS 1ST DES.
1989-1991 38 TEETH 1ST DES. (2) REQ.
1989-1994 38 TEETH 2ND DES. (2) REQ.
1989-1991 19 TEETH 1ST DES.
1989-1994 19 TEETH 2ND DES.
1989-1991 1ST DES.
1989-1994 2ND DES. 23MM WIDE- RIGHT HAND
1989-1994 2ND DES. 23MM WIDE- LEFT HAND
1989-1994 2ND DES. 23MM WIDE- UPPER
2.3-D (138) DOHC ENG - 1988-95 - 4 Cyl. - 3.62 Bore
Timing Kit
3-383SB
3pc Set
3-383S
3-3DR130
383
383M
3DR130
S692
S734
S653
S747
BT188
BG304
BG305
BG306
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
KIT INCLUDES [383], (2) [S734], [S747], [BG304], [BG305] &
[BG306] UPDATED TIMING CHAIN WILL NOT FIT ORIGINAL
WATER PUMP SPROCKET USE GM 24570609 WITH 383 CHAIN.
MELLING DOES NOT FURNISH
1992-1995 INCLUDES [383], (2) [S734] & [S747] 2ND DES.
1988-1991 INCLUDES [3DR130], (2) [S692] & [S653] 1ST DES.
1988-1995 130 LINKS STANDARD FINISH CHAIN 2ND DES.
130 LINKS FINE FINISH CHAIN
1988-1991 130 LINKS 1ST DES.
1988-1991 38 TEETH 1ST DES. (2) REQ.
1988-1995 38 TEETH 2ND DES. (2) REQ.
1988-1991 19 TEETH 1ST DES.
1988-1995 19 TEETH 2ND DES.
1988-1991 1ST DES.
1988-1995 2ND DES. 23MM WIDE- RIGHT HAND
1988-1995 2ND DES. 23MM WIDE- LEFT HAND
1988-1995 2ND DES. 23MM WIDE- UPPER
19
140 ENG - 1975-77 - 4 Cyl. - 3 1/2 Bore (CHEVROLET)
20
2.4-B,0 (145) DOHC ENG - 2006-10 - 4 Cyl. - 3.46 Bore (G6,SOLSTICE) ECOTEC
Belt
Cam Sprocket
Timing Kit
B-012
S426
3-4201SX
3-4202S
Oil Jet Nozzle
Camshaft Bolt
Chain
Crank Sprocket
Balance Shaft Sprocket
Chain Tensioner
Chain Guide
208
5467N
5496B
4201F
4202F
S849
S851
S853
S855
BT5383
BT5481
BG5375
BG5381
BG5382
BG5384
BG5385
BG5386
91 TEETH
36 TEETH
KIT INCLUDES [4201F], [BT5481], [BG5375], [BG5381], [BG5382],
[5467N] (DOES NOT INCLUDE SPROCKETS) TIMING CHAIN KIT
KIT INCLUDES [4202F], [S853], [S855], [S851], [BT5383],
[BG5384], [BG5385], [BG5386] BALANCE SHAFT CHAIN KIT
TORQUE TO YIELD BOLT 2 REQUIRED
148 LINKS CAMSHAFT TIMING CHAIN
134 LINKS BALANCE SHAFT CHAIN
23 TEETH OUTER
42 TEETH INNER
21 TEETH LEFT HAND; INTAKE
21 TEETH RIGHT HAND; EXHAUST
BALANCE SHAFT CHAIN TENSIONER; LOWER
NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mm O.A.L
CAMSHAFT CHAIN TENSIONER; RIGHT HAND UPPER
CAMSHAFT CHAIN GUIDE; RIGHT HAND
CAMSHAFT CHAIN GUIDE; LEFT HAND
CAMSHAFT CHAIN GUIDE; CENTER UPPER
BALANCE SHAFT CHAIN GUIDE; RIGHT HAND LOWER
BALANCE SHAFT CHAIN; LEFT HAND LOWER
BALANCE SHAFT CHAIN GUIDE; UPPER
Line
No.
21
PONTIAC (Continued)
Part Title
Timing Kit
3-390SA
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-390S
390
S804T
S805
BT355
BT356
BG365
BG366
BG367
BG368
Gear Set
Crank Gear
Cam Thrust Plate Spacer
Gear Set
Crank Gear
Cam Thrust Plate Spacer
Gear Set
Crank Gear
Cam Thrust Plate Spacer
Gear Set
Crank Gear
Cam Thrust Plate Spacer
ALUM. INCLUDES [2524] & [2537]
FIBER INCLUDES [2542] & [2537]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
2538S
2542S
2524
2542
2537
MG221
ALUM. INCLUDES [2524] & [2537]
FIBER INCLUDES [2542] & [2537]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
2538S
2542S
2524
2542
2537
MG221
ALUM. INCLUDES [2524] & [2537]
FIBER INCLUDES [2542] & [2537]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
2.5-5 (151) ENG - 1980-83 - 4 Cyl. - 4.000 Bore
Gear Set
Cam Gear
27
2538S
2542S
2524
2542
2537
MG221
2.5-2 (151) ENG - 1982-86 - 4 Cyl. - 4.000 Bore
Cam Gear
26
ALUM. INCLUDES [2524] & [2537]
FIBER INCLUDES [2542] & [2537]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
151-V ENG - 1977-80 - 4 Cyl. - 4.000 Bore
Cam Gear
25
2538S
2542S
2524
2542
2537
MG221
151-9 ENG - 1979 - 4 Cyl. - 4.000 Bore
Cam Gear
24
1997-2002 KIT INCLUDES [390], (2) [S804T], [S805], [BT355],
[BT356], [BG365], [BG366], [BG367]
INCLUDES [390], (2) [S804T], [S805]
130 LINKS
38 TEETH 2 REQUIRED
19 TEETH
1997-2002 TENSIONER ARM
1997-2002 HYDRAULIC (2ND DESIGN)
1996-2002 RIGHT HAND; CAMSHAFT
1996-2002 LEFT HAND; CAMSHAFT
1996-2002 UPPER; CAMSHAFT
1996-1997 BAL SHAFT
151-1 ENG - 1978-79 - 4 Cyl. - 4.000 Bore
Cam Gear
23
Description
2.4-T (146) DOHC ENG - 1996-02 - 4 Cyl. - 3.54 Bore (GRAND AM, SUNFIRE)
Chain Guide
22
Part No
Crank Gear
Cam Thrust Plate Spacer
2538S
2542S
2524
2542
2537
MG221
ALUM. INCLUDES [2524] & [2537]
FIBER INCLUDES [2542] & [2537]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
2.5-F (151) ENG - 1982-83 - 4 Cyl. - 4.000 Bore
Gear Set
Cam Gear
2538S
2542S
2524
2542
ALUM. INCLUDES [2524] & [2537]
FIBER INCLUDES [2542] & [2537]
54 TEETH ALUMINUM
54 TEETH FIBER
Continued on Next Page
209
PONTIAC (Continued)
Line
No.
Part Title
Part No
Description
27
2.5-F (151) ENG - 1982-83 - 4 Cyl. - 4.000 Bore (Continued)
28
2.5-R (151) ENG - 1982-91 - 4 Cyl. - 4.000 Bore
Crank Gear
Cam Thrust Plate Spacer
3pc Set
Chain
Gear Set
Cam Gear
29
30
31
32
33
34
Crank Gear
Cam Thrust Plate Spacer
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-378SA
378
2538S
2542S
2524
2542
2537
MG221
S690
S713
BT220
27 TEETH
1991 INCLUDES [378], [S690] & [S713]
1991 56 LINKS
1982-1986 ALUM. INCLUDES [2524] & [2537]
1982-1990 FIBER INCLUDES [2542] & [2537]
1982-1986 54 TEETH ALUMINUM
1982-1990 54 TEETH FIBER
1982-1990 27 TEETH
1991 42 TEETH
1991 21 TEETH
1991
2.5-U (151) ENG - 1985-91 - 4 Cyl. - 4.000 Bore
3pc Set
Chain
Gear Set
Cam Gear
Crank Gear
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-378S
378
2544S
2544
2537
S690
S695
BT143
1990-1991 INCLUDES [378], [S690] & [S695]
1990-1991 56 LINKS
1985-1989 INCLUDES [2544] & [2537]
1985-1989 54 TEETH
1985-1989 27 TEETH
1990-1991 42 TEETH
1990-1991 21 TEETH
1990-1991
2.8-1 (173) ENG - 1982-84 - V6 - 89 MM Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-373S
373
S506
S511
BD59
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
2.8-7 (173) ENG - 1980 - V6 - 89 MM Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-373S
373
S506
S511
BD59
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
2.8-9 (173) ENG - 1985-88 - V6 - 89 MM Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-373S
373
S506
S511
BD59
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
2.8-L (173) ENG - 1983-84 - V6 - 3.504 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-373S
373
S506
S511
BD59
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
2.8-S (173) ENG - 1985-89 - V6 - 89 MM Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Continued on Next Page
210
2537
MG221
3-373S
373
S506
S511
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
PONTIAC (Continued)
Line
No.
Part Title
Part No
Description
34
2.8-S (173) ENG - 1985-89 - V6 - 89 MM Bore (Continued)
35
2.8-W (173) ENG - 1985-89 - V6 - 89 MM Bore
Damper
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
BD59
3-372S
3-373S
373
385
S506
S620
S511
S619
BD131
BD59
1987-1989 INCLUDES [385], [S620] & [S619]
1985-1986 INCLUDES [373], [S506] & [S511]
1985-1986 64 LINKS
1987-1989 64 LINKS
1985-1986 40 TEETH
1987-1989 40 TEETH
1985-1986 20 TEETH
1987-1989 20 TEETH
1987-1989
1985-1986
36
2.8-X (173) ENG - 1981-86 - V6 - 89 MM Bore
37
2.8-Z (173) ENG - 1982-84 - V6 - 89 MM Bore
38
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-373S
373
S506
S511
BD59
3-373S
373
S506
S511
BD59
40
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
3.0-L (181) ENG - 1985-87 - V6 - 3.800 Bore
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
3-359SC
359
CB100
S610
S609
S621
39
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
Damper
S621
BD58
INCLUDES [359], [S610] & [S621] 1985 2ND DES. & 1986-88
54 LINKS
W/SPRING
40 TEETH
1985 20 TEETH 1ST DES. SPLINED DRIVE W/32MM THICK
BALANCER HUB
1985 20 TEETH 2ND DES. W/DOUBLE FLATS ON OUTSIDE OF
SPROCKET TO TURN OIL PUMP- 36MM THICK BALANCER HUB
1986-1987 20 TEETH
W/SPRING
3.1-D (189) ENG - 1990-95 - V6 - 3.503 Bore (TRANSPORT)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-372S
385
S620
S619
BT5536
Damper
BD131
INCLUDES [385], [S620] & [S619]
64 LINKS
40 TEETH
20 TEETH
1994-1995 INCLUDES GASKET AND 2 MOUNTING BOLTS
DAMPER
1990-1993
3.1-J (189) ENG - 2000-03 - V6 - 3.50 Bore (GRAND PRIX)
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-700SB
3-700S
700
S848
S847
BD600
KIT INCLUDES [700], [S847], [S848], [BD600]
INCLUDES [700], [S847], [S848]
80 LINKS
50 TEETH
25 TEETH
211
PONTIAC (Continued)
Line
No.
41
Part Title
Part No
3.1-M (189) OHV ENG - 1994-99 - V6 - 3.50 Bore
Timing Kit
3-385SC
3-385SC
3-700SB
3pc Set
3-385S
3-385S
3-700S
Chain
Cam Thrust Plate Spacer
Cam Sprocket
Crank Sprocket
Damper
42
Description
385
700
MG221
S756
S756
S848
S619
S619
S847
BD336
BD600
1994-1998 KIT INCLUDES [385], [S619], [S756], [BD336]
1999 KIT INCLUDES [385], [S619], [S756], [BD336] 1ST DES.
1999 KIT INCLUDES [700], [S847], [S848], [BD600] 2ND DES.
W/79 LINK CHAIN; 50 TOOTH CAM SPROCKET; 25 TOOTH
CRANK SPROCKET
1994-1998 INCLUDES [385], [S756] & [S619]
1999 INCLUDES [385], [S756] & [S619] 1ST DES. W/64 LINK
CHAIN, 40 TOOTH CAM SPROCKET & 20 TOOTH CRANK
SPROCKET
1999 INCLUDES [700], [S847], [S848] 2ND DES. W/79 LINK
CHAIN, 50 TOOTH CAM SPROCKET & 25 TOOTH CRANK
SPROCKET
1994-1998 64 LINKS 1ST DES.
1999 80 LINKS 2ND DES. W/80 LINKS
1994-1995
1994-1998 40 TEETH
1999 40 TEETH 1ST DES.
1999 50 TEETH 2ND DES.
1994-1998 20 TEETH
1999 20 TEETH 1ST DES.
1999 25 TEETH 2ND DES.
1994-1998 1ST DES.
1999 2ND DES.
3.1-T (189) ENG - 1988-94 - V6 - 3.503 Bore (CAR)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-372S
3-373S
373
385
S506
S620
S511
S619
BD131
BD59
INCLUDES [385], [S620] & [S619] EXC. FIREBIRD
1990-1992 INCLUDES [373], [S506] & [S511] FIREBIRD ONLY
1990-1992 64 LINKS FIREBIRD ONLY
64 LINKS EXC. FIREBIRD
1990-1992 40 TEETH FIREBIRD ONLY
40 TEETH EXC. FIREBIRD
1990-1992 20 TEETH FIREBIRD ONLY
20 TEETH EXC. FIREBIRD
EXC. FIREBIRD
1990-1992 FIREBIRD ONLY
43
3.1-V (189) ENG - 1989-90 - V6 - 3.503 Bore
44
3.2 (195) OHV ENG - 1961-63 - 4 Cyl. - 4 1/16 Bore (TEMPEST, LEMANS)
45
212
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
3-372S
385
S620
S619
BD131
3-350S
350
INCLUDES [385], [S620] & [S619]
64 LINKS
40 TEETH
20 TEETH
INCLUDES [350], [S305] & [S371]
60 LINKS
3.3-N (204) ENG - 1992-93 - V6 - 3.700 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-377SA
377
S726
S621
BD295
BD295
BD58
INCLUDES [377], [S726] & [S621]
54 LINKS
40 TEETH
20 TEETH
1992 2ND DES. W/COUNTER- BORED DAMPER BOLT HOLE
1993
1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE
PONTIAC (Continued)
Line
No.
Part Title
Part No
Description
46
3.4-S (207) ENG - 1993-95 - V6 - 3.62 Bore
47
3.4-E (207) ENG - 1996-05 - V6 - 3.62 Bore (FIREBIRD,GRAND AM,GRAND PRIX) (TRANSPORT,
AZTEK, MONTANA) INCLUDES VANS
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
48
49
50
51
52
53
3-373S
373
S506
S511
BD59
3-385SC
3-700SB
3-385S
3-700S
385
700
S756
S848
S619
S847
BD336
BD600
INCLUDES [373], [S506] & [S511]
64 LINKS
40 TEETH
20 TEETH
1993
1996-1999 KIT INCLUDES [385], [S619], [S756], [BD336]
2000-2005 KIT INCLUDES [700], [S847], [S848], [BD600]
1996-1999 INCLUDES [385], [S756] & [S619]
2000-2005 INCLUDES [700], [S847], [S848]
1996-1999 64 LINKS
2000-2005 80 LINKS
1996-1999 40 TEETH
2000-2005 50 TEETH
1996-1999 20 TEETH
2000-2005 25 TEETH
1996-1999
2000-2005
3.4-X (207) DOHC ENG - 1991-96 - V6 - 3.62 Bore
3pc Set
Chain
Belt
Crank Sprocket
Intermediate Sprocket
Belt Tensioner
3-382S
382
B-0192
B-0273
S719
S758
BT308
INCLUDES [382], [S719] & [S758]
64 LINKS CRANKSHAFT TO INTERMEDIATE SHAFT
1991-1995 169 TEETH INTERMEDIATE SHAFT TO CAMSHAFTS
1996 200 TEETH INTERMEDIATE SHAFT TO CAMSHAFTS
20 TEETH
1991-1994 40 TEETH CHAIN DRIVE
CHAIN DRIVE
3.4-F (207) OHV ENG - 2006-09 - V6 - 3.62 Bore (TORRENT) 12V
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-700SB
3-700S
700
S848
S847
BD600
2006-2007 KIT INCLUDES [700], [S847], [S848], [BD600]
2006-2007 INCLUDES [700], [S847], [S848]
80 LINKS
2006-2007 50 TEETH
25 TEETH
3.5-L,8 (213) OHV ENG - 2005-06 - 6 Cyl. - 3.70 Bore (G6,MONTANA) GAS ENG.
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-700SB
3-700S
700
S848
S847
BD600
KIT INCLUDES [700], [S847], [S848], [BD600]
INCLUDES [700], [S847], [S848]
80 LINKS
50 TEETH
25 TEETH
G6 ONLY
3.5-K,N (213) OHV ENG - 2007-10 - 6 Cyl. - 3.90 Bore (G6) GAS/FLEX FUEL ENG
Chain
Crank Sprocket
700
S847
80 LINKS
25 TEETH
215 ENG - 1964-65 - 6 Cyl. - 3 3/4 Bore LEMANS
Cam Gear
Crank Gear
2542
2501
54 TEETH FIBER
27 TEETH
215 ENG - 1961-62 - 8 Cyl. - 3.50 Bore SKYLARK,SPECIAL(BUICK ENG)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-359S
359
S334
S323
INCLUDES [359], [S334] & [S323]
54 LINKS
40 TEETH
20 TEETH
213
PONTIAC (Continued)
Line
No.
54
Part Title
Part No
3.6-7 (217) DOHC ENG - 2007-09 - 6 Cyl. - 3.70 Bore (2007-09 G6) (2008-09 G8) (2008-09 TORRENT)
Timing Kit
3-753S
Chain
753
754
S921
S930
S932
BT5535
Crank Sprocket
Idler Sprocket
Chain Tensioner
BT5536
BT5537
Chain Guide
BG5530
BG5531
BG5532
55
Description
BG5533
BG5534
BG5548
INCLUDES [753], (2) [754], [S921], [S930], [S932], [BT5535],
[BT5536], [BT5537], [BG5548], [BG5530], [BG5531], [BG5532],
[BG5533], [BG5534] FOR ENGINES USING SILENT TYPE CHAINS
96 LINKS LOWER; PRIMARY
114 LINKS UPPER; SECONDARY (2) REQUIRED
30 TEETH
22 TEETH INCLUDES MOUNTING BOLT LEFT HAND
22 TEETH INCLUDES MOUNTING BOLT RIGHT HAND
INCLUDES GASKET AND 2 MOUNTING BOLTS SECONDARY
CHAIN; LEFT HAND
INCLUDES GASKET AND 2 MOUNTING BOLTS SECONDARY
CHAIN; RIGHT HAND
INCLUDES MOUNTING GASKET AND 2 MOUNTING BOLTS
PRIMARY CHAIN
INCLUDES (2) MOUNTING BOLTS PRIMARY CHAIN; UPPER
INCLUDES 2 MOUNTING BOLTS SECONDARY CHAIN; LEFT
HAND
INCLUDES 2 MOUNTING BOLTS SECONDARY CHAIN; RIGHT
HAND
PRIMARY CHAIN; RIGHT HAND
PRIMARY CHAIN; LEFT HAND; LOWER
PRIMARY CHAIN; RIGHT HAND; LOWER
229-9 ENG - 1980-81 - V6 - 3.736 Bore (229-K 1980-81)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-163S
3-499SA
163
499
S288
S390
S289
S505
INCLUDES [163], [S288] & [S289] H.D.
INCLUDES [499], [S390] & [S505]
58 LINKS H.D.
46 LINKS
44 TEETH H.D.
36 TEETH
22 TEETH H.D.
18 TEETH
56
231-2 ENG - 1979 - V6 - 3.800 Bore (BUICK)
57
231-A ENG - 1977-87 - V6 - 3.800 Bore (BUICK)
58
231-C ENG - 1976-77 - V6 - 3.800 Bore (BUICK-ODD FIRE)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-359SB
359
CB100
S610
S323
BD44
BD45
3pc Set
3-359S
Chain
Cam Button
Cam Sprocket
Crank Sprocket
359
CB100
S334
S323
Continued on Next Page
214
3-359SB
359
S610
S323
BD44
BD45
INCLUDES [359], [S610] & [S323]
54 LINKS
40 TEETH
20 TEETH
RIGHT HAND W/SPRING
LEFT HAND
INCLUDES [359], [S610] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
1977-1987 RIGHT HAND W/SPRING
1977-1981 LEFT HAND
INCLUDES [359], [S334] & [S323] NON-INTEGRAL DIST. DRIVE
GEAR
54 LINKS
W/SPRING
40 TEETH
20 TEETH
PONTIAC (Continued)
Line
No.
Part Title
Part No
Description
58
231-C ENG - 1976-77 - V6 - 3.800 Bore (BUICK-ODD FIRE) (Continued)
59
3.8-1 (231) OHV ENG - 1992-03 - V6 - 3.800 Bore SUPERCHARGED
Damper
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
60
BD44
BD45
3-375SA
3-381AS
3-381ASB
375
381A
S716
S810
S812
S729
S811
BD295
BD295
BD344
BD58
3-381AS
3-381ASB
Chain
Cam Sprocket
62
63
1992-1994 INCLUDES [375], [S716] & [S729]
1995 INCLUDES [381A], [S810], [S811]
1996-2003 INCLUDES [381A], [S811] & [S812]
1992-1994 54 LINKS
1995-2003 64 LINKS
1992-1994 40 TEETH
1995 48 TEETH
1996-2003 48 TEETH
1992-1994 20 TEETH
1995-2003 24 TEETH
1992 2ND DES. W/COUNTER BORED DAMPER BOLT HOLE
1993-1994
1995-2003
1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE
3.8-2,4 (231) OHV ENG - 2004-08 - 6 Cyl. - 3.80 Bore (VIN 2 GRAND PRIX) (VIN 4 GRAND PRIX
W/SC) BUICK ENGINE
3pc Set
61
RIGHT HAND W/SPRING
LEFT HAND
Crank Sprocket
Damper
381A
S810
S812
S811
BD344
INCLUDES [381A], [S810], [S811] VIN CODE 2 ONLY - NON
SUPERCHARGED
2004-2007 INCLUDES [381A], [S811] & [S812] VIN CODE 4 ONLY
- SUPERCHARGED
64 LINKS
48 TEETH VIN CODE 2 ONLY - NON SUPERCHARGED
2004-2007 48 TEETH VIN CODE 4 ONLY - SUPERCHARGED
24 TEETH
3.8-3 (231) ENG - 1987-88 - V6 - 3.800 Bore
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-359SC
359
CB100
S610
S621
BD58
INCLUDES [359], [S610] & [S621]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
W/SPRING
3.8-7 (231) ENG - 1989 - V6 - 3.800 Bore (TURBO)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-359SB
359
S610
S323
BD44
INCLUDES [359], [S610] & [S323]
54 LINKS
40 TEETH
20 TEETH
1989 RIGHT HAND W/SPRING
3.8-C (231) ENG - 1988-91 - V6 - 3.800 Bore
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-375S
3-375SA
375
CB300
S716
S718
S729
BD295
BD58
1988-1990 INCLUDES [375], [S718] & [S729]
1991 INCLUDES [375], [S716] & [S729]
54 LINKS
1988-1990
1991 40 TEETH SINGLE BOLT
1988-1990 40 TEETH 3 BOLT
20 TEETH
1988-1991 2ND DES. W/COUNTER- BORED DAMPER BOLT
HOLE
1988-1991 1ST DES. W/CHAMFERED DAMPER BOLT HOLE
215
PONTIAC (Continued)
Line
No.
Part Title
Part No
Description
64
3.8-K (231) ENG - 1995-05 - V6 - 3.800 Bore (M.F.I.)
65
3.8-L (231) ENG - 1992-95 - V6 - 3.800 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
66
67
3-381AS
381A
S810
S811
BD344
3-375SA
3-381AS
375
381A
S716
S810
S729
S811
BD295
BD295
BD344
BD58
Timing Kit
3-700SB
3pc Set
3-700S
Chain
Cam Sprocket
Crank Sprocket
Damper
700
S848
S847
BD600
2006 KIT INCLUDES [700], [S847], [S848], [BD600] 2007-09
REQUIRE ACTUATOR
2006 INCLUDES [700], [S847], [S848] 2007-09 REQUIRE
ACTUATOR
80 LINKS
2006 50 TEETH W/O ACTUATOR
25 TEETH
250 OHV ENG - 1970-76 - 6 Cyl. - 3.68,3.88 Bore (CHEVROLET)
Gear Set
Cam Gear
Crank Gear
216
1992-1994 INCLUDES [375], [S716] & [S729]
1995 INCLUDES [381A], [S810], [S811]
1992-1994 54 LINKS
1995 64 LINKS
1992-1994 40 TEETH
1995 48 TEETH
1992-1994 20 TEETH
1995 24 TEETH
1992 2ND DES. W/COUNTER- BORED DAMPER BOLT HOLE
1993-1994
1995
1992 1ST DES. W/CHAMFERED DAMPER BOLT HOLE
3.9-1,W (237) OHV ENG - 2006-09 - 6 Cyl. - 3.90 Bore (G6,MONTANA) INCLUDES FLEX FUEL
2525S
2538S
2540S
68
INCLUDES [381A], [S810], [S811]
64 LINKS
48 TEETH
24 TEETH
Cam Thrust Plate Spacer
2524
2524
2526
2542
2542
2501
2537
2537
MG221
1970-1974 INCLUDES [2524] & [2501]
1975-1976 ALUM. INCLUDES [2524] & [2537] W/#71 STAMPED
ON OEM CRANK GEAR HUB
1976 INCLUDES [2526] & [2541] W/#20 STAMPED ON OEM
CRANK GEAR HUB
1970-1975 54 TEETH ALUMINUM
1976 54 TEETH ALUMINUM W/#14 STAMPED ON OEM GEAR
HUB
1976 54 TEETH W/#20 STAMPED ON CRANK GEAR HUB
1970-1975 54 TEETH FIBER
1976 54 TEETH FIBER W/#14 STAMPED ON OEM GEAR HUB
1970-1974 27 TEETH
1975 27 TEETH W/INTAKE MANIFOLD CAST AS INTEGRAL
PART OF CYL. HEAD
1976 27 TEETH W/#71 STAMPED ON GEAR HUB
4.1-4 (252) ENG - 1982 - V6 - 3.965 Bore (BUICK)
3pc Set
Chain
Cam Button
Cam Sprocket
Crank Sprocket
Damper
3-359SB
359
CB100
S610
S323
BD44
INCLUDES [359], [S610] & [S323]
54 LINKS
W/SPRING
40 TEETH
20 TEETH
RIGHT HAND W/SPRING
PONTIAC (Continued)
Line
No.
Part Title
Part No
Description
69
260-F ENG - 1975-76 - 8 Cyl. - 3.500 Bore OLDS ENGINE)
70
4.3-Z (262) ENG - 1985-87 - V6 - 4.000 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
71
72
Crank Sprocket
3-498SC
498
S348
S349
3-499SA
3-506SB
499
S390
S732
S505
INCLUDES [498], [S348] & [S349]
48 LINKS
36 TEETH
18 TEETH
1985-1986 INCLUDES [499], [S390] & [S505]
1987 INCLUDES [499], [S732] & [S505]
46 LINKS
1985-1986 36 TEETH
1987 36 TEETH
18 TEETH
4.3-S (265) ENG - 1980-81 - 8 Cyl. - 3.750 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-365S
365
S494
S495
INCLUDES [365], [S494] & [S495]
60 LINKS
42 TEETH
21 TEETH
267-J ENG - 1979-82 - 8 Cyl. - 3.500 Bore (CHEVROLET ENG)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-163S
3-499S
163
499
S288
S390
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
73
287 ENG - 1955 - 8 Cyl. - 3 3/4 Bore
74
301-W ENG - 1978-81 - 8 Cyl. - 4.000 Bore
75
76
77
Chain
3pc Set
Chain
Cam Sprocket
Crank Sprocket
347
3-365S
365
S494
S495
60 LINKS
INCLUDES [365], [S494] & [S495]
60 LINKS
42 TEETH
21 TEETH
301-Y ENG - 1977-79 - 8 Cyl. - 4.000 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-365S
365
S494
S495
INCLUDES [365], [S494] & [S495]
60 LINKS
42 TEETH
21 TEETH
4.9-T (301) ENG - 1980-81 - 8 Cyl. - 4.000 Bore (TURBO)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-365S
365
S494
S495
INCLUDES [365], [S494] & [S495]
60 LINKS
42 TEETH
21 TEETH
5.0 (305) ENG - 1977-92 - 8 Cyl. - 3.736 Bore (1988-92 5.0-E) (1985-92 5.0-F) (1984-86 5.0-G)
(1977-87 5.0-H) (1983 5.0-S) (1982-83 5.0-7)
3pc Set
Chain
Cam Sprocket
3-163S
3-499S
3-506SC
163
499
S288
S390
1977-1986 INCLUDES [163], [S288] & [S289] HEAVY DUTY
1977-1986 INCLUDES [499], [S390] & [S391] STANDARD DUTY
1987-1992 INCLUDES [499], [S732] & [S391] STANDARD DUTY
1977-1986 58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
1977-1986 44 TEETH HEAVY DUTY
1977-1986 36 TEETH STANDARD DUTY
Continued on Next Page
217
PONTIAC (Continued)
Line
No.
77
Part Title
Description
5.0 (305) ENG - 1977-92 - 8 Cyl. - 3.736 Bore (1988-92 5.0-E) (1985-92 5.0-F) (1984-86 5.0-G)
(1977-87 5.0-H) (1983 5.0-S) (1982-83 5.0-7) (Continued)
Cam Sprocket
Crank Sprocket
78
Part No
S732
S289
S391
1987-1992 36 TEETH STANDARD DUTY
1977-1986 22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
307 ENG - 1971-72 - 8 Cyl. - 3 7/8 Bore (CHEVROLET)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-163S
3-499S
163
499
S288
S390
S289
S391
INCLUDES [163], [S288] & [S289] H.D.
INCLUDES [499], [S390] & [S391]
58 LINKS H.D.
46 LINKS
44 TEETH H.D.
36 TEETH
22 TEETH H.D.
18 TEETH
79
5.0-Y (307) OHV ENG - 1986-89 - 8 Cyl. - 3.800 Bore (1986 PARISIENNE) (1987-89 SAFARI)
80
5.0-Y (307) OHV ENG - 1981 - 8 Cyl. - 3.800 Bore (BONNEVILLE, CATALINA) OLDS ENG.
81
82
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-498SC
498
S348
S349
3-498SC
498
S348
S349
Chain
347
85
86
87
3pc Set
Crank Sprocket
Damper
3-3SRH60S
3SRH60
S878
S894
S827
BD417
2008 INCLUDES [3SRH60], [S894] & [S827]; FOR USE W/SINGLE
BOLT CAMSHAFT
2005-2007 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3
BOLT CAMSHAFT
60 LINKS
2005-2007 44 TEETH; FOR USE W/3BOLT CAMSHAFT
2008 44 TEETH; FOR USE W/SINGLE BOLT CAM
22 TEETH 22 TEETH
326 ENG - 1963-67 - 8 Cyl. - 3.72 Bore
3pc Set
Chain
3-350S
350
INCLUDES [350], [S305] & [S371]
60 LINKS
347 ENG - 1957 - 8 Cyl. - 3 15/16 Bore
Chain
347
60 LINKS
350 ENG - 1968-71 - 8 Cyl. - 3.88 Bore
3pc Set
Chain
3-350S
350
INCLUDES [350], [S305] & [S371]
60 LINKS
350 ENG - 1972-76 - 8 Cyl. - 3.88 Bore (EXC. 1975 VENTURA)
3pc Set
Chain
3-350S
350
INCLUDES [350], [S305] & [S371]
60 LINKS
350-X OHV ENG - 1978-80 - 8 Cyl. - 3.80 Bore (1978-80 BONNEVILLE) (1978-80 CATALINA) BUICK
ENG.
3pc Set
Chain
Cam Sprocket
Continued on Next Page
218
60 LINKS
5.3-C (325) OHV ENG - 2005-08 - 8 Cyl. - 3.78 Bore (GEN IV LS4 GRAND PRIX GXP)
Chain
Cam Sprocket
84
INCLUDES [498], [S348] & [S349]
48 LINKS
36 TEETH
18 TEETH
316 ENG - 1956 - 8 Cyl. - 3 15/16 Bore
3-3SRH60SA
83
INCLUDES [498], [S348] & [S349]
48 LINKS
36 TEETH
18 TEETH
3-359S
359
S334
INCLUDES [359], [S334] & [S323]
54 LINKS
40 TEETH
PONTIAC (Continued)
Line
No.
87
Part Title
S323
BD44
BD45
20 TEETH
RIGHT HAND W/SPRING
LEFT HAND
350-H,J OHV ENG - 1975-76 - 8 Cyl. - 3.88 Bore (1975 GRAND AM, GRAND LEMANS, LEMANS)
(1975-76 VENTURA)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
89
Description
350-X OHV ENG - 1978-80 - 8 Cyl. - 3.80 Bore (1978-80 BONNEVILLE) (1978-80 CATALINA) BUICK
ENG. (Continued)
Crank Sprocket
Damper
88
Part No
3-359S
359
S334
S323
BD44
BD45
INCLUDES [359], [S334] & [S323]
54 LINKS
40 TEETH
20 TEETH
RIGHT HAND W/SPRING
LEFT HAND
350-L ENG - 1977-79 - 8 Cyl. - 4.000 Bore (CHEVROLET)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-163S
3-499S
163
499
S288
S390
S289
S391
INCLUDES [163], [S288] & [S289] HEAVY DUTY
INCLUDES [499], [S390] & [S391] STANDARD DUTY
58 LINKS HEAVY DUTY
46 LINKS STANDARD DUTY
44 TEETH HEAVY DUTY
36 TEETH STANDARD DUTY
22 TEETH HEAVY DUTY
18 TEETH STANDARD DUTY
90
350-P OHV ENG - 1976-77 - 8 Cyl. - 3.88 Bore (OLDSMOBILE ENG.)
91
350-R ENG - 1977-80 - 8 Cyl. - 4.06 Bore (OLDS ENG)
92
93
3pc Set
Chain
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-498SC
498
S348
S349
INCLUDES [350], [S305] & [S371]
60 LINKS
INCLUDES [498], [S348] & [S349]
48 LINKS
36 TEETH
18 TEETH
5.7 (350N) ENG - 1980-85 - 8 Cyl. - 4.00 Bore (OLDSMOBILE-DIESEL)
Chain
Crank Sprocket
180
S503
48 LINKS
18 TEETH
5.7-8 (350) ENG - 1987-92 - 8 Cyl. - 4.000 Bore
3pc Set
Chain
Cam Sprocket
Crank Sprocket
94
3-350S
350
3-506SC
3-506SE
499
S732
S391
S797
1987-1991 INCLUDES [499], [S732] & [S391]
1992 INCLUDES [499], [S732], [S797]
46 LINKS
36 TEETH
1987-1991 18 TEETH
1992 18 TEETH
5.7-G (350) OHV ENG - 1998-02 - 8 Cyl. - 3.90 Bore (GEN III LS1 FIREBIRD)
3pc Set
3-3SRH60SA
Chain
Cam Sprocket
Crank Sprocket
Chain Damper Adapter
Bracket
3SRH60
S878
S827
BD417-BRKT
INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT
CAMSHAFT
60 LINKS
44 TEETH; FOR USE W/3BOLT CAMSHAFT
22 TEETH 22 TEETH
ALLOWS THE USE OF THE LS2 TIMING CHAIN DAMPER
[BD417] ON ANY GM LS ENGINE BLOCK NOT ORIGINALLY
EQUIPPED FOR CHAIN DAMPERS; DAMPER NOT INCLUDED
EXCLUDES VVT ENGINES
Continued on Next Page
219
PONTIAC (Continued)
Line
No.
Part Title
Part No
Description
94
5.7-G (350) OHV ENG - 1998-02 - 8 Cyl. - 3.90 Bore (GEN III LS1 FIREBIRD) (Continued)
95
5.7-P (350) ENG - 1993-97 - 8 Cyl. - 4.000 Bore (FIREBIRD,FORMULA,TRANS AM) LT1
Chain Damper Adapter
Bracket
3pc Set
Chain
Cam Sprocket
96
97
Crank Sprocket
BD417-DBRKT
3-509SA
3-509SB
499
S742
S814
S797
99
1995-1997 INCLUDES [499], [S797], [S814]
1993-1994 INCLUDES [499], [S797], [S742]
46 LINKS
1993-1994 36 TEETH
1995-1997 36 TEETH
18 TEETH
5.7 (350) OHV ENG - 2004 - 8 Cyl - 3.90 Bore (GEN III LS1 GTO)
3pc Set
3-3SRH60SA
Chain
Cam Sprocket
Crank Sprocket
3SRH60
S878
S827
INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT
CAMSHAFT
60 LINKS
44 TEETH; FOR USE W/3BOLT CAMSHAFT
22 TEETH 22 TEETH
6.0-U (364) OHV ENG - 2005-06 - 8 Cyl. - 4.00 Bore (GEN IV LS2 GTO) VORTEC
3pc Set
3-3SRH60SA
Chain
Cam Sprocket
Crank Sprocket
Chain Damper Adapter
Bracket
3SRH60
S878
S827
BD417-BRKT
BD417-DBRKT
98
ALLOWS THE USE OF THE LS2 TIMING CHAIN DAMPER
[BD417] ON ANY GM LS ENGINE BLOCK NOT ORIGINALLY
EQUIPPED FOR CHAIN DAMPERS; INCLUDES [BD417]
DAMPER EXCLUDES VVT ENGINES
INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3 BOLT
CAMSHAFT
60 LINKS
44 TEETH; FOR USE W/3BOLT CAMSHAFT
22 TEETH 22 TEETH
ALLOWS THE USE OF THE LS2 TIMING CHAIN DAMPER
[BD417] ON ANY GM LS ENGINE BLOCK NOT ORIGINALLY
EQUIPPED FOR CHAIN DAMPERS; DAMPER NOT INCLUDED
EXCLUDES VVT ENGINES
ALLOWS THE USE OF THE LS2 TIMING CHAIN DAMPER
[BD417] ON ANY GM LS ENGINE BLOCK NOT ORIGINALLY
EQUIPPED FOR CHAIN DAMPERS; INCLUDES [BD417]
DAMPER EXCLUDES VVT ENGINES
6.0-Y (364) OHV ENG - 2008-09 - 8 Cyl. - 4.00 Bore (G8 GEN IV L76) VORTEC
3pc Set
3-3SRH60S
Chain
Cam Sprocket
Crank Sprocket
3SRH60
S894
S827
INCLUDES [3SRH60], [S894] & [S827]; FOR USE W/SINGLE
BOLT CAMSHAFT
60 LINKS
44 TEETH; FOR USE W/SINGLE BOLT CAM
22 TEETH 22 TEETH
6.1 (370) OHV ENG - 1958 - 8 Cyl. - 4.06 Bore
Chain
339
60 LINKS
3pc Set
3-3SRH60S
Chain
Cam Sprocket
Crank Sprocket
Damper
3SRH60
S894
S827
BD417
INCLUDES [3SRH60], [S894] & [S827]; FOR USE W/SINGLE
BOLT CAMSHAFT SINGLE BOLT CAM; W/4 SENSORS
60 LINKS
44 TEETH; FOR USE W/SINGLE BOLT CAM
22 TEETH 22 TEETH
3pc Set
Chain
3-350S
350
INCLUDES [350], [S305] & [S371]
60 LINKS
3pc Set
Chain
3-350S
350
INCLUDES [350], [S305] & [S371]
60 LINKS
100 6.2-W (376) OHV ENG - 2009 - 8 Cyl. - 4.06 Bore G8 (GEN IV LS3 ENG)
101 389 ENG - 1959-66 - 8 Cyl. - 4 1/16 Bore
102 400 ENG - 1977-79 - 8 Cyl. - 4.13 Bore
220
PONTIAC (Continued)
Line
No.
Part Title
Part No
Description
103 400 ENG - 1973-76 - 8 Cyl. - 4.12 Bore
3pc Set
Chain
3-350S
350
INCLUDES [350], [S305] & [S371]
60 LINKS
3pc Set
Chain
3-350S
350
INCLUDES [350], [S305] & [S371]
60 LINKS
3pc Set
Chain
3-350S
350
INCLUDES [350], [S305] & [S371]
60 LINKS
3pc Set
Chain
3-350S
350
INCLUDES [350], [S305] & [S371]
60 LINKS
3pc Set
Chain
3-350S
350
INCLUDES [350], [S305] & [S371]
60 LINKS
3pc Set
Chain
3-350S
350
INCLUDES [350], [S305] & [S371]
60 LINKS
3pc Set
Chain
3-350S
350
INCLUDES [350], [S305] & [S371]
60 LINKS
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-498SC
498
S348
S349
INCLUDES [498], [S348] & [S349]
48 LINKS
36 TEETH
18 TEETH
3pc Set
Chain
3-350S
350
INCLUDES [350], [S305] & [S371]
60 LINKS
3pc Set
Chain
3-350S
350
INCLUDES [350], [S305] & [S371]
60 LINKS
3pc Set
Chain
3-350S
350
INCLUDES [350], [S305] & [S371]
60 LINKS
104 400 ENG - 1972 - 8 Cyl. - 4.12 Bore
105 400 ENG - 1971 - 8 Cyl. - 4.12 Bore
106 400 ENG - 1970 - 8 Cyl. - 4.12 Bore
107 400 ENG - 1969 - 8 Cyl. - 4.12 Bore
108 400 ENG - 1968 - 8 Cyl. - 4.12 Bore
109 400 ENG - 1967 - 8 Cyl. - 4.12 Bore
110 403 ENG - 1977-79 - 8 Cyl. - 4.351 Bore (OLDSMOBILE)
111 421 ENG - 1963-66 - 8 Cyl. - 4 3/32 Bore
112 428 ENG - 1967-69 - 8 Cyl. - 4.12 Bore
113 455 OHV ENG - 1970-76 - 8 Cyl. - 4.15 Bore
PORSCHE
4 Cyl.
Engine
1983CC 2.0 SOHC
6 Cyl.
2341CC 2.4 SOHC
Year
Line
1977-82
1
6 Cyl.
2688CC 2.7 SOHC
4 Cyl.
1972-73
2
2475CC 2.5 DOHC
1987-88
3
2475CC 2.5 SOHC
1983-88
4
6 Cyl.
4 Cyl.
Engine
1
Part Title
Line
1974-77
5
Engine
Year
Line
3163CC 3.2 SOHC
1984-89
10
3294CC 3.3 SOHC
1978-79
11
6
3294CC 3.3 SOHC
1986-89
12
6 Cyl. (Continued)
2688CC 2.7 SOHC
1989
2983CC 3.0 DOHC
1990-95
7
3294CC 3.3 SOHC
1991-92
13
2999CC 3.0 DOHC
1989
8
3606CC 3.6 SOHC
1989-98
14
1976-83
9
2999CC 3.0 SOHC
Line
No.
Year
Part No
Description
1983CC 2.0 SOHC ENG - 1976-82 - 4 Cyl. - 86.5 MM Bore (924)
Belt
Belt Tensioner
B-017
BT148
121 TEETH
221
PORSCHE (Continued)
Line
No.
Part Title
Part No
Description
2
2341CC 2.4 SOHC ENG - 1972-73 - 6 Cyl. - 84 MM Bore (911T,911E,911S)
3
2475CC 2.5 DOHC ENG - 1987-88 - 4 Cyl. - 100 MM Bore (944S)
4
3DR98
Chain
1972-1973 98 LINKS BOTH RIGHT & LEFT HAND
B-0152
Belt
119 TEETH
2475CC 2.5 SOHC ENG - 1983-88 - 4 Cyl. - 100 MM Bore (924 & 944)
B-0107
B-0108
Belt
1983-1988 117 TEETH CAMSHAFT
1983-1988 110 TEETH BAL. SHAFT
5
2688CC 2.7 SOHC ENG - 1974-77 - 6 Cyl. - 90 MM Bore (911,911S & CARRERA)
6
2688CC 2.7 SOHC ENG - 1989 - 4 Cyl. - 104 MM Bore (944)
7
8
3DR98
Chain
1974-1977 98 LINKS BOTH RIGHT & LEFT HAND
B-0107
Belt
117 TEETH
2983CC 3.0 DOHC ENG - 1990-95 - 4 Cyl. - 104 MM Bore (944,968)
B-0152
Belt
1990-1995 119 TEETH CAMSHAFT
2999CC 3.0 DOHC ENG - 1989 - 4 Cyl. - 104 MM Bore (944S2)
B-0108
B-0152
Belt
1989 110 TEETH BAL. SHAFT
1989 119 TEETH CAMSHAFT
9
2999CC 3.0 SOHC ENG - 1976-83 - 6 Cyl. - 95 MM Bore (911SC & 911 TURBO CARRERA)
10
3163CC 3.2 SOHC ENG - 1984-89 - 6 Cyl. - 95 MM Bore (911 CARRERA, 911 SPEEDSTER)
11
12
13
14
3DR98
Chain
1976-1983 98 LINKS BOTH RIGHT & LEFT HAND
3DR98
Chain
1984-1989 98 LINKS BOTH RIGHT & LEFT HAND
3294CC 3.3 SOHC ENG - 1978-79 - 6 Cyl. - 97 MM Bore (930 TURBO,TURBO COUPE)
3DR98
Chain
1978-1979 98 LINKS BOTH RIGHT & LEFT HAND
3294CC 3.3 SOHC ENG - 1986-89 - 6 Cyl. - 97 MM Bore (911 TURBO CARRERA)
3DR98
Chain
1986-1989 98 LINKS BOTH RIGHT & LEFT HAND
3294CC 3.3 SOHC ENG - 1991-92 - 6 Cyl. - 97 MM Bore (911 TURBO)
3DR98
Chain
98 LINKS RIGHT AND LEFT
3606CC 3.6 SOHC ENG - 1989-98 - 6 Cyl. - 100 MM Bore (911 CARRERA)
3DR98
Chain
1989-1998 98 LINKS BOTH RIGHT & LEFT HAND
RENAULT
Year
Line
747CC
1966-77
1
1108CC OHV
1964-71
5
1565CC OHV
1983-84
9
782CC
1966-77
2
1289CC OHV
1970-71
6
1647CC OHV
1973-79
10
845CC
1966-67
3
1397CC
1983-87
7
1967CC OHC
1987
11
956CC
1963-66
4
1565CC OHV
1969-74
8
2152CC OHC
1984-86
12
4 Cyl.
Engine
Line
No.
Part Title
Engine
4 Cyl. (Continued)
747CC ENG - 1966-77 - 4 Cyl. -
2
782CC ENG - 1966-77 - 4 Cyl. -
3
4
5
6
222
Chain
Line
Part No
1
Chain
Year
3SR64
3SR64
Engine
4 Cyl. (Continued)
Description
64 LINKS
64 LINKS
845CC OHV ENG - 1966-67 - 4 Cyl. - 58.0 MM Bore (DAUPHINE)
Chain
3SR64
64 LINKS
956CC ENG - 1963-66 - 4 Cyl. - 65.0 MM Bore (R-8,CARAVELLE)
Chain
3SR58
58 LINKS
1108CC OHV ENG - 1964-71 - 4 Cyl. - 70 MM Bore (CARAVELLE S,R-8 & R-10)
Chain
3SR58
58 LINKS
1289CC OHV ENG - 1970-71 - 4 Cyl. - 73.0 MM Bore (R-10)
Chain
3SR58
58 LINKS
Year
Line
RENAULT (Continued)
Line
No.
Part Title
Part No
Description
7
1397CC ENG - 1983-87 - 4 Cyl. - 76 MM Bore (ENCORE,ALLIANCE)
8
1565CC OHV ENG - 1969-74 - 4 Cyl. - 77.0 MM Bore (R12,R15,R16,R17)
9
10
11
12
3SR58
Chain
58 LINKS
3DR72
Chain
72 LINKS
1565CC OHV ENG - 1983-84 - 4 Cyl. - 77.0 MM Bore (FUEGO TURBO)
3DR72
Chain
72 LINKS
1647CC OHV ENG - 1973-79 - 4 Cyl. - 79.0 MM Bore (1973-77 R-12, 1973-76 R-15, 1973-79 R-17)
3DR72
Chain
72 LINKS
1967CC OHC ENG - 1987 - 4 Cyl. - 82 MM Bore (ALLIANCE GTA)
B-0140
Belt
118 TEETH
2152CC OHC ENG - 1984-86 - 4 Cyl. - 86 MM Bore (FUEGO 1984-85 & R18I 1984-86)
B-0111
Belt
116 TEETH
ROVER
Year
Line
1978CC OHC
1964-71
1
1996CC OHV
1952-57
2
4 Cyl.
Engine
Line
No.
Part Title
Engine
4 Cyl. (Continued)
2286CC OHV
Year
Line
1958-73
3
Part No
Year
Line
2625CC OHV
1963-72
4
2995CC OHV
1959-68
5
6 Cyl.
Engine
Description
1
1978CC OHC ENG - 1964-71 - 4 Cyl. - 3.375 Bore (2000, 2000SC & 2000TC)
2
1996CC OHV ENG - 1952-57 - 4 Cyl. - 3.063 Bore (LANDROVER BASE)
3
2286CC OHV ENG - 1958-73 - 4 Cyl. - 3.563 Bore (LANDROVER SERIES II & IIA)
4
5
3DR74
3DR78
Chain
3DR78
Chain
3DR78
Chain
1964-1971 74 LINKS LOWER
1964-1971 78 LINKS UPPER
78 LINKS
78 LINKS
2625CC OHV ENG - 1963-72 - 6 Cyl. - 3.062 Bore (LANDROVER SERIES IIA & IIB)
3DR78
Chain
78 LINKS
2995CC OHV ENG - 1959-68 - 6 Cyl. - 3.062 Bore (MK.I, MK.II & MK.III CANADA ONLY)
3DR78
Chain
78 LINKS
SAAB
Year
Line
2.0 (1985CC) SOHC
1975-80
1
2.0 (1985CC) SOHC
1986-88
2
2.0 (1998) DOHC
2001-08
3
4 Cyl.
Engine
Line
No.
1
2
3
Part Title
6 Cyl.
Engine
4.2-S (256) DOHC
8 Cyl.
5.3-M (325) OHV
Part No
Year
Line
2005-09
4
2005-09
5
Engine
8 Cyl. (Continued)
6.0-H (364) OHV
Year
Line
2008-09
6
Description
2.0 (1985CC) SOHC ENG - 1975-80 - 4 Cyl. - 90.0 MM Bore (1975-80 MODEL 99) (1979-80 MODEL
900) (1978 MODEL 99 TURBO)
Chain
3DR114
114 LINKS
2.0 (1985CC) SOHC ENG - 1986-88 - 4 Cyl. - 90.0 MM Bore (1986-88 MODEL 900) (1986 900S) B201I
Chain
3DR114
114 LINKS
2.0 (1998) DOHC ENG. - 2001-08 - 4 Cyl. - 86.0 MM Bore (9-3) TURBOCHARGED ECOTEC MEXICO
ONLY
Chain
Water Pump Sprocket
Chain Tensioner
4202F
S911
BT5383
BT5481
2003-2008 134 LINKS BALANCE SHAFT CHAIN
2003-2008 40 TEETH
2003-2008 BALANCE SHAFT CHAIN TENSIONER
2003-2008 NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mm
O.A.L CAMSHAFT CHAIN TENSIONER
Continued on Next Page
223
SAAB (Continued)
Line
No.
3
Part Title
Part No
2.0 (1998) DOHC ENG. - 2001-08 - 4 Cyl. - 86.0 MM Bore (9-3) TURBOCHARGED ECOTEC MEXICO
ONLY (Continued)
BG5375
BG5381
BG5382
BG5384
BG5385
Chain Guide
4
BG5386
3-195S
Timing Kit
195
S908A
S913
BT5512
BG5504
BG5506
BG5510
BG6006
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
2005-2007 INCLUDES [195], [S908A], [S913], [BT5512], [BG5504],
[BG5506], [BG6006]
2008-2009 INCLUDES [195], [S908A], [S913], [BT5512], [BG5504],
[BG5510], [BG6006]
168 LINKS
58 TEETH
29 TEETH
RIGHT HAND
2005-2007 LEFT HAND
2008-2009 LEFT HAND
2005-2007 UPPER
5.3-M (325) OHV ENG - 2005-09 - 8 Cyl. - 3.78 Bore (9-7x TRUCK) GM VORTEC ENGINE
3-3SRH60S
3pc Set
3-3SRH60SA
3SRH60
S878
S894
S827
BT5490
BD417
Chain
Cam Sprocket
6
2003-2008 CAMSHAFT CHAIN GUIDE; RIGHT HAND LOWER
2003-2008 CAMSHAFT CHAIN GUIDE; LEFT HAND LOWER
2003-2008 CAMSHAFT CHAIN GUIDE; UPPER
2003-2008 BALANCE SHAFT CHAIN GUIDE; LOWER
2003-2008 BALANCE SHAFT CHAIN GUIDE; UPPER RIGHT
HAND
2003-2008 BALANCE SHAFT CHAIN GUIDE; UPPER LEFT HAND
4.2-S (256) DOHC ENG - 2005-09 - 6 Cyl. - 3.66 Bore (9-7x, 4.2i TRUCK) GM VORTEC ENGINE
3-195SB
5
Description
Crank Sprocket
Chain Tensioner
Damper
2008-2009 INCLUDES [3SRH60], [S894] & [S827]; FOR USE
W/SINGLE BOLT CAMSHAFT
2005-2007 INCLUDES [3SRH60], [S878] & [S827]; FOR USE W/3
BOLT CAMSHAFT
60 LINKS
2005-2007 44 TEETH; FOR USE W/3BOLT CAMSHAFT
2008-2009 44 TEETH; FOR USE W/SINGLE BOLT CAM
22 TEETH 22 TEETH
2008-2009
2005-2007
6.0-H (364) OHV ENG - 2008-09 - 8 Cyl. - 4.00 Bore (9-7x AERO TRUCK) GM VORTEC ENGINE
3pc Set
3-3SRH60S
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3SRH60
S894
S827
BT5490
INCLUDES [3SRH60], [S894] & [S827]; FOR USE W/SINGLE
BOLT CAMSHAFT
60 LINKS
44 TEETH; FOR USE W/SINGLE BOLT CAM
22 TEETH 22 TEETH
SATURN
4 Cyl.
Engine
Year
Line
6 Cyl.
Engine
Year
Line
1.9-7 (116) DOHC
1991-02
1
3.0-R (181) DOHC
2000-05
6
1.9-8,9 (116) SOHC
1991-02
2
3.5-4 (3474,3475CC)
2004-05
7
2.0-P,X (122) DOHC
2004-10
3
SOHC
2.2-D,F (134) DOHC
2000-07
4
3.5-4 (3471CC) SOHC
2006-07
8
2.4-B,P,Z,5 (145) DOHC
2006-10
5
3.5-L (213) OHV
2005-06
9
Line
No.
1
Part Title
Year
Line
3.5-N (213) OHV
2007-10
10
3.6-7,D (217) DOHC
2007-10
11
3.9-1,W (237) OHV ENG
2006-07
12
Description
1.9-7 (116) DOHC ENG - 1991-02 - 4 Cyl. - 3.23 Bore
Timing Kit
Continued on Next Page
224
Part No
Engine
6 Cyl. (Continued)
3-192S
1991-1998 KIT INCLUDES [192], [S773], (2) [S786], [BG328],
[BG329], [BG330], [BT327]
Line
No.
1
SATURN (Continued)
Part Title
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-192SA
192
S786
S773
BT327
BT5412
BG328
BG329
BG330
BG5415
BG5416
1991-1998 INCLUDES [192], (2) [S786], [S773]
1991-1998 126 LINKS
1991-1998 38 TEETH (2) REQ.
1991-1998 19 TEETH
1991-1998 HYD.
1999-2002
1991-1998 RIGHT HAND
1991-1998 LEFT HAND
1991-1998 UPPER
1999-2002 RIGHT HAND
1999-2002 LEFT HAND
1.9-8,9 (116) SOHC ENG - 1991-02 - 4 Cyl. - 3.23 Bore
Timing Kit
3-3SR92
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
3-3SR92A
3SR92
S786
S773
BT327
BT5412
BG331
BG332
BG5413
BG5414
Chain Guide
3
Description
1.9-7 (116) DOHC ENG - 1991-02 - 4 Cyl. - 3.23 Bore (Continued)
Chain Guide
2
Part No
1991-1998 KIT INCLUDES [3SR92], [S773], [S786], [BG332],
[BG331], [BT327]
1991-1998 INCLUDES [3SR92], [S786], [S773]
1991-1998 92 LINKS
1991-1998 38 TEETH
1991-1998 19 TEETH
1991-1998 HYD.
1999-2002
1991-1998 RIGHT HAND
1991-1998 LEFT HAND
1999-2002 LEFT HAND
1999-2002 RIGHT HAND
2.0-P,X (122) DOHC ENG - 2004-10 - 4 Cyl. - 3.39 Bore (VIN P ION SUPERCHARGED, VIN X SKY
TURBOCHARGED) (ECOTEC)
Timing Kit
3-4201SX
Oil Jet Nozzle
Chain
5467N
4201F
4202F
S850
Cam Sprocket
S850
Crank Sprocket
Balance Shaft Sprocket
Water Pump Sprocket
Chain Tensioner
Chain Guide
S849
S851
S853
S855
S911
BT5383
BT5481
BG5375
BG5381
BG5382
BG5384
BG5385
BG5386
KIT INCLUDES [4201F], [BT5481], [BG5375], [BG5381], [BG5382],
[5467N] (DOES NOT INCLUDE SPROCKETS) TIMING CHAIN KIT
148 LINKS CAMSHAFT CHAIN
134 LINKS BALANCE SHAFT CHAIN
2004-2007 46 TEETH EXH. ION ONLY (SKY REQUIRES
ACTUATORS)
2004-2007 46 TEETH INT. ION ONLY (SKY REQUIRES
ACTUATORS)
23 TEETH OUTER SPROCKET
42 TEETH SKY ONLY; INNER SPROCKET
2004-2007 21 TEETH ION ONLY; LEFT HAND; INTAKE
2004-2007 21 TEETH ION ONLY; RIGHT HAND; EXHAUST
40 TEETH SKY ONLY
BALANCE SHAFT CHAIN TENSIONER; LOWER
NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mm O.A.L
CAMSHAFT CHAIN TENSIONER; RIGHT HAND UPPER
CAMSHAFT CHAIN GUIDE; RIGHT HAND
CAMSHAFT CHAIN GUIDE; LEFT HAND
CAMSHAFT CHAIN GUIDE; CENTER UPPER
BALANCE SHAFT CHAIN GUIDE; RIGHT HAND LOWER
BALANCE SHAFT CHAIN GUIDE; LEFT HAND LOWER
BALANCE SHAFT CHAIN GUIDE; UPPER
225
SATURN (Continued)
Line
No.
4
Part Title
Part No
2.2-D,F (134) DOHC ENG - 2000-07 - 4 Cyl. - 3.39 Bore (L61 ENG ECOTEC) (L SERIES,LW
SERIES,LS SERIES,ION,VUE) INCLUDES TRUCKS
Timing Kit
3-4201S
3-4201SX
3-4202S
Oil Jet Nozzle
Camshaft Bolt
Chain
Cam Sprocket
Crank Sprocket
Balance Shaft Sprocket
Water Pump Sprocket
Chain Tensioner
Chain Guide
5
5467N
5496B
4201F
4202F
S850
S849
S851
S853
S855
S911
BT5383
BT5481
BG5375
BG5381
BG5382
BG5384
BG5385
BG5386
KIT INCLUDES [4201F], (2) [S850], [S849], [BT5481], [BG5375],
[BG5381], [BG5382], [5467N], (2) [5496B] (INCLUDES
SPROCKETS) CAMSHAFT CHAIN KIT
KIT INCLUDES [4201F], [BT5481], [BG5375], [BG5381], [BG5382],
[5467N] (DOES NOT INCLUDE SPROCKETS) CAMSHAFT CHAIN
KIT
KIT INCLUDES [4202F], [S853], [S855], [S851], [BT5383],
[BG5384], [BG5385], [BG5386] BALANCE SHAFT CHAIN KIT
TORQUE TO YIELD BOLT 2 REQ.
148 LINKS CAMSHAFT CHAIN
134 LINKS BALANCE SHAFT CHAIN
46 TEETH 2 REQ.
23 TEETH OUTER SPROCKET
42 TEETH INNER SPROCKET
21 TEETH LEFT HAND; INTAKE
21 TEETH RIGHT HAND; EXHAUST
40 TEETH
BALANCE SHAFT CHAIN TENSIONER; LOWER
NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mm O.A.L
CAMSHAFT CHAIN TENSIONER; UPPER
CAMSHAFT CHAIN GUIDE; RIGHT HAND
CAMSHAFT CHAIN GUIDE; LEFT HAND
CAMSHAFT CHAIN GUIDE; CENTER UPPER
BALANCE SHAFT CHAIN GUIDE; RIGHT HAND LOWER
BALANCE SHAFT CHAIN GUIDE; LEFT HAND LOWER
BALANCE SHAFT CHAIN GUIDE; UPPER
2.4-B,P,Z,5 (145) DOHC ENG - 2006-10 - 4 Cyl. - 3.46 Bore (AURA,ION,SKY,VUE) GAS,ELECTRIC
ECOTEC; INCLUDES TRUCKS
Chain
Crank Sprocket
Chain Tensioner
4201F
4202F
S849
S851
BT5383
BT5481
Chain Guide
BG5375
BG5381
BG5382
BG5384
BG5385
BG5386
226
Description
2007-2010 148 LINKS CAMSHAFT CHAIN; AURA,VUE ONLY
2007-2010 134 LINKS BALANCE SHAFT CHAIN; AURA,VUE ONLY
2007-2010 23 TEETH OUTER SPROCKET; EXC. ION
2007-2010 42 TEETH INNER SPROCKET; EXC. ION
2007-2010 BALANCE SHAFT CHAIN TENSIONER;
AURA,SKY,VUE ONLY
2007-2010 NEW DESIGN W/10.0mm DIA. PLUNGER; 82.0mm
O.A.L CAMSHAFT CHAIN TENSIONER; UPPER; (2007 AURA,
2007-10 SKY,VUE ONLY)
2007-2010 CAMSHAFT CHAIN GUIDE; RIGHT HAND; AURA,VUE
ONLY
2007-2010 CAMSHAFT CHAIN GUIDE; LEFT HAND; AURA,VUE
ONLY
2007-2010 CAMSHAFT CHAIN GUIDE; UPPER; AURA,SKY,VUE
ONLY
2007-2010 BALANCE SHAFT CHAIN GUIDE; UPPER;
AURA,SKY,VUE ONLY
2007-2010 BALANCE SHAFT CHAIN GUIDE; LEFT HAND;
AURA,SKY,VUE ONLY
2007-2010 BALANCE SHAFT CHAIN GUIDE; RIGHT HAND;
AURA,SKY,VUE ONLY
SATURN (Continued)
Line
No.
Part Title
Part No
Description
6
3.0 (181) DOHC ENG - 2000-05 - 6 Cyl. - 3.39 Bore (LS2,LW2,L300,LW300,VUE) ECOTEC
7
3.5-4 (3474,3475CC) SOHC ENG - 2004-05 - 6 Cyl - 3.50, 3.54 Bore (VUE) HONDA ENG. NON VTEC
8
9
10
11
Belt
Belt
B-0285
B-0329
197 TEETH INTERFERENCE ENGINE APPLICATION
3.5-4 (3471CC) SOHC ENG - 2006-07 - 6 Cyl. - 3.54 Bore (VUE) VTEC
Belt
B-0329
197 TEETH INTERFERENCE ENGINE APPLICATION
3.5-L (213) OHV ENG - 2005-06 - 6 Cyl - 3.70 Bore (RELAY-2, RELAY-3)
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-700SB
3-700S
700
S848
S847
BD600
KIT INCLUDES [700], [S847], [S848], [BD600]
INCLUDES [700], [S847], [S848]
80 LINKS
50 TEETH
25 TEETH
3.5-N (213) OHV ENG - 2007-10 - 6 Cyl - 3.90 Bore (AURA & VUE)
Chain
Crank Sprocket
700
S847
80 LINKS
25 TEETH
3.6-7,D (217) DOHC ENG - 2007-10 - 6 Cyl. - 3.70 Bore (2007-09 AURA) (2007-10 OUTLOOK)
(2008-10 VUE)
Timing Kit
3-753S
Chain
753
754
S921
S930
S932
BT5535
Crank Sprocket
Idler Sprocket
Chain Tensioner
BT5536
BT5537
Chain Guide
BG5530
BG5531
BG5532
12
225 TEETH
BG5533
BG5534
BG5548
2007-2009 INCLUDES [753], (2) [754], [S921], [S930], [S932],
[BT5535], [BT5536], [BT5537], [BG5548], [BG5530], [BG5531],
[BG5532], [BG5533], [BG5534] FOR ENGINES USING SILENT
TYPE CHAINS
96 LINKS LOWER; PRIMARY
114 LINKS UPPER; SECONDARY (2) REQUIRED
30 TEETH
22 TEETH INCLUDES MOUNTING BOLT LEFT HAND
22 TEETH INCLUDES MOUNTING BOLT RIGHT HAND
INCLUDES GASKET AND 2 MOUNTING BOLTS SECONDARY
CHAIN; LEFT HAND
INCLUDES GASKET AND 2 MOUNTING BOLTS SECONDARY
CHAIN; RIGHT HAND
INCLUDES MOUNTING GASKET AND 2 MOUNTING BOLTS
PRIMARY CHAIN
INCLUDES (2) MOUNTING BOLTS PRIMARY CHAIN; UPPER;
EXC. 2010 VUE
2007-2009 INCLUDES 2 MOUNTING BOLTS SECONDARY
CHAIN; LEFT HAND
INCLUDES 2 MOUNTING BOLTS SECONDARY CHAIN; RIGHT
HAND; EXC. 2010 VUE
PRIMARY CHAIN; RIGHT HAND; EXC. 2010 VUE
PRIMARY CHAIN; LEFT HAND; LOWER EXC. 2010 VUE
2007-2009 PRIMARY CHAIN; RIGHT HAND; LOWER
3.9-1,W (237) OHV ENG - 2006-07 - 6 Cyl. - 3.90 Bore (RELAY) GAS, FLEX FUEL
Timing Kit
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Damper
3-700SB
3-700S
700
S848
S847
BD600
KIT INCLUDES [700], [S847], [S848], [BD600]
INCLUDES [700], [S847], [S848]
80 LINKS
50 TEETH
25 TEETH
227
SCION
4 Cyl.
Engine
1.5 (1497CC) 1NZFE
Year
Line
2004-06
1
DOHC
2
Year
Line
2.4 (2362,2398CC) 2AZFE
2005-13
2
Engine
Year
Line
DOHC
Line
No.
1
Engine
4 Cyl. (Continued)
Part Title
Part No
Description
1.5 (1497CC) 1NZFE DOHC ENG - 2004-06 - 4 Cyl. - 75.0 MM Bore (xA, xB) TOYOTA VVTi ENG
Timing Kit
3-4214SA
Chain
Cam Sprocket
Chain Tensioner
4214C
S846
BT5565
BT5566
BG5564
Chain Guide
KIT INCLUDES [4214C], [S846], [BG5564], [BT5565], [BT5566],
(DOES NOT INCLUDE INTAKE CAMSHAFT ACTUATOR OR
CRANK SPROCKET)
124 LINKS
2004-2006 86 TEETH EXH.
TENSIONER
TENSIONER ARM
LEFT HAND
2.4 (2362,2398CC) 2AZFE DOHC ENG - 2005-13 - 4 Cyl. - 88.5 MM Bore (tC,xB) TOYOTA ENG
3-752S
Timing Kit
2005-2012 SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(1)
TENSIONER,(3) GUIDES,(1) CAM SPROCKET,(1) CRANK
SPROCKET, (1) OIL PUMP SPROCKET, (1) SEAL, (1) GASKET
STUDEBAKER
6 Cyl.
Engine
Year
Line
194
1965-66
1
230
1966
2
Line
No.
1
2
3
Part Title
8 Cyl.
Engine
283
Year
Line
1965-66
3
Part No
Engine
Year
Line
Description
194 ENG - 1965-66 - 6 Cyl. - 3 9/16 Bore
Gear Set
Cam Gear
Crank Gear
Cam Thrust Plate Spacer
2525S
2524
2542
2501
MG221
INCLUDES [2524] & [2501]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
230 ENG - 1966 - 6 Cyl. - 3 7/8 Bore (COMMANDER, CRUISER, DAYTONA, WAGONAIRE)
Gear Set
Cam Gear
Crank Gear
Cam Thrust Plate Spacer
2525S
2524
2542
2501
MG221
INCLUDES [2524] & [2501]
54 TEETH ALUMINUM
54 TEETH FIBER
27 TEETH
283 ENG - 1965-66 - 8 Cyl. - 3 7/8 Bore
3-489S
505
S261
S262
3pc Set
Chain
Cam Sprocket
Crank Sprocket
INCLUDES [505],[S261] & [S262]
46 LINKS
36 TEETH
18 TEETH
SUBARU
3 Cyl.
Engine
1.2-7,8 (1189CC) SOHC
4 Cyl.
Year
Line
1987-95
1
1.8 (1781CC) SOHC
1985-94
2
1.8 (1781CC) SOHC
1993-97
3
Line
No.
1
Part Title
Year
Line
2.2 (2212CC) SOHC
1990-01
4
2.5 (2458CC) SOHC
1999-12
5
2.5 (2458CC) DOHC
1996-99
6
Part No
Year
Line
2.7 (2672CC) SOHC
1989-91
7
3.3 3318CC DOHC
1992-97
8
6 Cyl.
Engine
Description
1.2-7,8 (1189CC) SOHC ENG - 1987-95 - 3 Cyl. - 78 MM Bore (JUSTY) (EF12 ENG.)
Chain
Continued on Next Page
228
Engine
4 Cyl. (Continued)
8MMSR70
70 LINKS BALANCE SHAFT CHAIN
SUBARU (Continued)
Line
No.
Part Title
Part No
Description
1
1.2-7,8 (1189CC) SOHC ENG - 1987-95 - 3 Cyl. - 78 MM Bore (JUSTY) (EF12 ENG.) (Continued)
2
1.8 (1781CC) SOHC ENG - 1985-94 - 4 Cyl. - 92 MM Bore (DL,GL,LOYALE,RX,XT) (8V EA82 ENG.)
B-0135
Belt
B-0299
B-0300
S674
S669
S673
S675
BT140
BT141
Belt
Cam Sprocket
Crank Sprocket
Idler Sprocket
Belt Tensioner
89 TEETH CAMSHAFT BELT
119 TEETH #2; LEFT HAND
98 TEETH #1; RIGHT HAND
36 TEETH 2 REQUIRED
18 TEETH INNER
18 TEETH OUTER
18 TEETH
1985-1994 #1; RIGHT HAND
#2; LEFT HAND
3
1.8 (1781CC) SOHC ENG - 1993-97 - 4 Cyl. - 87.9 MM Bore (IMPREZA) (16V EJ18 ENG)
4
2.2 (2212CC) SOHC ENG - 1990-01 - 4 Cyl. - 96.9 MM Bore (IMPREZA,LEGACY) (EJ22E,EJ22T ENG)
5
2.5 (2458CC) SOHC ENG - 1999-12- 4 Cyl. - 99.5 MM Bore
(BAJA,FORESTER,IMPREZA,LEGACY,OUTBACK) 16V (EJ251,EJ252,EJ253,EJ259)
6
B-0172
B-0254
Belt
B-0172
B-0172
B-0254
B-0304
Belt
B-0307
Belt
211 TEETH EXC. CALIF. EMISSIONS
211 TEETH W/CALIF. EMISSIONS
1990-1993 211 TEETH
1994-1998 211 TEETH EXC. CALIF. EMISSIONS
1994-1998 211 TEETH W/CALIF. EMISSIONS
1999-2001 211 TEETH
2000-2008 223 TEETH LEGACY, OUTBACK
2.5 (2458CC) DOHC ENG - 1996-99 - 4 Cyl. - 99.5 MM Bore (LEGACY, FORESTER, IMPREZA)
(EJ25D ENG)
B-0277
B-0304
Belt
1996-1998 281 TEETH
1999 211 TEETH
7
2.7 (2672CC) SOHC ENG - 1989-91 - 6 Cyl. - 92 MM Bore (XT) (ER27 ENG)
8
3.3 (3318CC) DOHC ENG - 1992-97 - 6 Cyl. - 96.9 MM Bore (SVX COUPE) EG33D ENG
B-0150
B-0151
Belt
118 TEETH #1; RIGHT HAND
139 TEETH #2; LEFT HAND
BT5280
BT5281
Belt Tensioner
Idler
SUZUKI
4 Cyl.
Engine
Year
Line
Engine
4 Cyl. (Continued)
Year
Line
Engine
4 Cyl. (Continued)
Year
Line
1.3-3 (1298CC) DOHC
1989-94
1
1.6 (1590CC) SOHC
1989-95
5
2.0 (2000CC) DOHC
1999-03
9
1.3-3 (1298CC) SOHC
1989-97
2
1.8 (1790CC) DOHC
1999-02
6
2.5 (2500CC) DOHC
2009-12
10
6 Cyl.
2007-09
11
1.3-5 (1325CC) SOHC
1986-89
3
1.8-2 1840CC DOHC
1996-98
7
1.6 (1590CC) SOHC
1990-02
4
2.0 (1995CC) DOHC
2007-12
8
Line
No.
Part Title
Part No
3.6 (3564CC) DOHC
Description
1
1.3-3 (1298CC) DOHC ENG - 1989-94 - 4 Cyl. - 74 MM Bore (SWIFT GT) (16 VALVE)
2
1.3 (1298CC) SOHC ENG - 1989-97 - 4 Cyl. - 74 MM Bore (SWIFT, SAMURAI) 8V G13BA ENG
3
Belt
Belt
B-0171
B-0272
B-095
B-095
119 TEETH
1995-1997 89 TEETH SWIFT
1989-1993 89 TEETH SWIFT
1990-1995 89 TEETH SAMURAI
1.3-5 (1325CC) SOHC ENG - 1986-89 - 4 Cyl. - 74.0 MM Bore (SAMURAI, SIDEKICK)
Belt
B-095
89 TEETH
229
SUZUKI (Continued)
Line
No.
4
5
6
Part Title
Part No
Description
1.6 (1590CC) SOHC ENG - 1990-02 - 4 Cyl. - 75.2 MM Bore (SIDEKICK 1990-98) (X-90 1996-98)
(ESTEEM 1995-01) (VITARA 1999-02) (NOT PRODUCED IN 1991)
Belt
B-0212
1990-2001 103 TEETH
1.6 (1590CC) SOHC ENG - 1989-95 - 4 Cyl. - 75.2 MM Bore (SIDEKICK-8 VALVE ENG)
Belt
Belt Tensioner
B-0164
BT139
95 TEETH
1.8 (1790CC) DOHC ENG - 1999-02 - 4 Cyl. - 84 MM Bore (ESTEEM)
Timing Kit
3-4198S
SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(3)
TENSIONERS,(2) GUIDES,(2) CAM SPROCKETS,(1) CRANK
SPROCKET, (1) IDLER SPROCKET, (1) SEAL, (1) GASKET
7
1.8-2 (1840CC) DOHC ENG - 1996-98 - 4 Cyl. - 78 MM Bore (SIDEKICK SPORT)
8
2.0 (1995CC) DOHC ENG - 2007-12 - 4 Cyl. - 84.0 MM Bore (SX4) J20B SUZUKI ENG.
9
2.0 (2000CC) DOHC ENG - 1999-03 - 4 Cyl. - 84.1 MM Bore (AERIO 2000-03,VITARA) J20A ENG
10
2.5 (2500CC) DOHC ENG - 2009-12 - 4 Cyl. - 89.0 MM Bore (EQUATOR) QR25DE NISSAN ENG
11
3.6 (3564CC) DOHC ENG - 2007-09 - 6 Cyl. - 94.0 MM Bore (XL7) N36A ENG
Timing Kit
Timing Kit
Timing Kit
Timing Kit
Timing Kit
3-4198S
3-4198S
3-4198S
3-4212SA
3-1007S
3-753S
Chain
1007
1044
753
754
Crank Sprocket
S1229
S921
S1225
S1227
S930
S932
BT5535
Idler Sprocket
Chain Tensioner
BT5536
Continued on Next Page
230
SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(3)
TENSIONERS,(2) GUIDES,(2) CAM SPROCKETS,(1) CRANK
SPROCKET, (1) IDLER SPROCKET, (1) SEAL, (1) GASKET
2007-2010 SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(3)
TENSIONERS,(2) GUIDES,(2) CAM SPROCKETS,(1) CRANK
SPROCKET, (1) IDLER SPROCKET, (1) SEAL, (1) GASKET
SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(3)
TENSIONERS,(2) GUIDES,(2) CAM SPROCKETS,(1) CRANK
SPROCKET, (1) IDLER SPROCKET, (1) SEAL, (1) GASKET
SOLD AS KIT ONLY; VARIABLE CAM SPROCKET NOT
INCLUDED; KIT INCLUDES (2) CHAINS,(2) TENSIONERS,(3)
GUIDES, (1) BALANCE SHAFT GUIDE,(1) CAM SPROCKET,(1)
CRANK SPROCKET, (1) BALANCE SHAFT SPROCKET, (1) SEAL
KIT
2007 KIT INCLUDES [1007], (2) [1044], [S1225], [S1227], [S1229],
[BT5535], [BT5536], [BT5537], [BG5530], [BG5531], [BG5532],
[BG5533], [BG5534], [BG5548] FOR ENGINES USING ROLLER
TYPE SECONDARY (UPPER) CHAINS
2008-2009 INCLUDES [753], (2) [754], [S921], [S930], [S932],
[BT5535], [BT5536], [BT5537], [BG5548], [BG5530], [BG5531],
[BG5532], [BG5533], [BG5534] FOR ENGINES USING SILENT
TYPE SECONDARY CHAINS
2007 78 LINKS PRIMARY ROLLER TIMING CHAIN
2007 92 LINKS SECONDARY ROLLER TIMING CHAIN; 2 REQ.
2008-2009 96 LINKS PRIMARY SILENT TIMING CHAIN; LOWER
2008-2009 114 LINKS SECONDARY SILENT TIMING CHAIN;
UPPER; 2 REQ.
2007 24 TEETH
2008-2009 30 TEETH
2007 18 / 27 TEETH LEFT HAND
2007 18 / 27 TEETH RIGHT HAND
2008-2009 22 TEETH INCLUDES MOUNTING BOLT LEFT HAND
2008-2009 22 TEETH INCLUDES MOUNTING BOLT RIGHT HAND
INCLUDES GASKET AND 2 MOUNTING BOLTS SECONDARY
CHAIN; LEFT HAND
INCLUDES GASKET AND 2 MOUNTING BOLTS SECONDARY
CHAIN; RIGHT HAND; UPPER
Line
No.
11
SUZUKI (Continued)
Part Title
Part No
Description
3.6 (3564CC) DOHC ENG - 2007-09 - 6 Cyl. - 94.0 MM Bore (XL7) N36A ENG (Continued)
Chain Tensioner
BT5537
Chain Guide
BG5530
BG5531
BG5532
BG5533
BG5534
BG5548
2008-2009 INCLUDES MOUNTING GASKET AND 2 MOUNTING
BOLTS PRIMARY CHAIN
INCLUDES (2) MOUNTING BOLTS PRIMARY CHAIN; UPPER
2008-2009 INCLUDES 2 MOUNTING BOLTS SECONDARY
CHAIN; LEFT HAND
INCLUDES 2 MOUNTING BOLTS SECONDARY CHAIN; RIGHT
HAND
PRIMARY CHAIN; RIGHT HAND
PRIMARY CHAIN; LEFT HAND; LOWER
2008-2009 PRIMARY CHAIN; RIGHT HAND; LOWER
231
TOYOTA
4 Cyl.
Engine
Year
Line
Engine
4 Cyl. (Continued)
Year
Line
1.1L (1077CC) KC OHV
1968-69
1
2.0L (1968CC) 18RC OHC
1972-74
28
1.2L (1166CC) 3KC OHV
1970-79
2
2.0L (1974CC) 2CTLC
1986
29
1.3L (1290CC) 4KC OHV
1981-82
3
OHC
1.3L (1290CC) 4KE OHV
1983-84
4
2.0L (1995CC) 2SELC
1983-86
30
1.5L (1452CC) 1AC OHC
1980
5
OHC
1.5L (1452CC) 3A OHC
1984-86
6
2.0L (1998CC) 1AZFE
1.5L (1452CC) 3AC OHC
1981-88
7
DOHC
1.5L (1456CC) 3E OHC
1987-90
8
2.0L (1998CC) 3SFE
Engine
4 Cyl. (Continued)
2.4L (2438CC) 2TZFZE
6 Cyl.
2.5L (2508CC) 2VZFE
2001-03
31
1987-00
32
1986-89
33
1988-95
34
2.6L (2563CC) 4M SOHC
6 Cyl.
2.6L (2563CC) 4ME OHC
1990-94
9
DOHC
1992-99
10
2.0L (1998CC) 3SGELC
2000-14
11
1983-87
12
2.0L (1998CC) 3YEC OHV
1984-85
35
DOHC
1.6L (1587CC) 4AF DOHC
1988-89
13
2.2L (2164CC) 5SFE
1990-01
36
1.6L (1587CC) 4AFE
1988-97
14
DOHC
6 Cyl.
2000-01
37
2.2L (2188CC) L OHC
1981-83
38
3.0L (2959CC) 3VZE
2.0L (1998CC) 3SGTE
DOHC
2.2L (2164CC) 5SFNE
1.6L (1587CC) 4AGE
1988-91
15
1988-91
51
1971-79
52
1979-80
53
2005-13
54
1994-04
55
2.8L (2754CC) 5ME OHC
1981-82
56
2.8L (2754CC) 5MGE
1982-88
57
1988-95
58
DOHC
DOHC
DOHC
50
DOHC
2.7L (2694CC) 3RZFE
DOHC
1.6L (1587CC) 4AC SOHC
4 Cyl.
2.7L (2694CC) 2TRFE
DOHC
DOHC
1994-97
DOHC
1.5L (1497CC) 5EFE
1.5L (1497CC) 1NZFE
Line
DOHC
1.5L (1456CC) 3EE OHC
DOHC
Year
1985-87
16
2.2L (2189CC) 20R OHC
1975-80
39
SOHC
2.2L (2237CC) 4YEC OHV
1986-89
40
3.0L (2959CC) 3VZFE
1992-93
59
1985-89
17
6 Cyl.
3.0L (2954CC) 7MGE,
1986-92
60
1.6L (1587CC) 4AGZE
1988-89
18
1994-06
61
1.6L (1587CC) 4ALC
1984-88
19
1993-97
62
1.6L (1588CC) 2TC OHV
1971-79
20
2.4L (2362CC) 2AZFXE
1.8L (1762CC) 7AFE
1993-97
21
DOHC
1995-04
63
2005-13
64
1.6L (1587CC) 4AGEC
DOHC
1.6L (1587CC) 4AGELC
2.3L (2253CC) 2M OHC
DOHC
4 Cyl.
1972
41
2001-13
42
2007-11
43
1981-90
44
DOHC
3.0L (2995CC) 1MZFE
2.4L (2362CC) 2AZFE
DOHC
SOHC
DOHC
3.0L (2997CC) 2JZGE
DOHC
3.4L (3378CC) 5VZFE
2.4L (2366CC) 22R OHC
DOHC
7MGTE DOHC
1.8L (1770CC) 3TC OHV
1980-82
22
2.4L (2366CC) 22RE OHC
1989-95
45
3.5L (3456CC) 2GRFE
1.8L (1794CC) 1ZZFE
1998-08
23
2.4L (2366CC) 22REC
1983-89
46
DOHC
2000-06
24
1985-88
47
1.8L (1839CC) 1CLC OHC
1984-85
25
2.4L (2438CC) 2RZFE
1995-04
48
1.8 (1839CC) 1CTLC OHC
1984-85
26
DOHC
1991-95
49
SOHC
DOHC
1.8L (1795CC) 2ZZGE
2.4L (2366CC) 22RTEC
OHC
DOHC
1967-70
27
2.4L (2438CC) 2TZFE
1.9L (1898CC) 8RC OHC
1969-71
27
DOHC
Part Title
1960-74
65
4.0L (3956CC) 1GRFE
2003-13
66
1975-87
67
DOHC
1.9L (1898CC) 3RC OHV
Line
No.
3.9L (3878CC) F OHV
Part No
4.2L (4227CC) 2F OHV
Description
1
1.1L (1077CC) KC OHV ENG - 1968-69 - 4 Cyl. - 75 MM Bore (COROLLA 1100)
2
1.2L (1166CC) 3KC OHV ENG - 1970-79 - 4 Cyl. - 75 MM Bore (COROLLA)
3
4
232
Crank Sprocket
Damper
Crank Sprocket
Damper
S491
BD22
S491
BD22
18 TEETH
18 TEETH
1.3L (1290CC) 4KC OHV ENG - 1981-82 - 4 Cyl. - 75 MM Bore (STARLET-KP61)
Crank Sprocket
Damper
S491
BD22
BD71
18 TEETH
1981 To 8/81
From 8/88 TO 1982
1.3L (1290CC) 4KE OHV ENG - 1983-84 - 4 Cyl. - 75 MM Bore (STARLET-KP61)
Damper
BD71
TOYOTA (Continued)
Line
No.
Part Title
Part No
Description
5
1.5L (1452CC) 1AC OHC ENG - 1980 - 4 Cyl. - 77 MM Bore (TERCEL-AL1)
6
1.5L (1452CC) 3A OHC ENG - 1980-86 - 4 Cyl. - 77 MM Bore (TERCEL)
7
8
Timing Kit
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
Timing Kit
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
10
Timing Kit
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
12
13
KIT INCLUDES [B-070], [S560], [S551] & [BT66]
88 TEETH
36 TEETH
18 TEETH
B-070-1
B-070
S560
S551
BT66
KIT INCLUDES [B-070], [S560], [S551] & [BT66]
88 TEETH
36 TEETH
18 TEETH
1.5L (1456CC) 3E OHC ENG - 1987-90 - 4 Cyl. - 73 MM Bore (TERCEL)
Belt
B-0136
B-0233
BT206
BT207
1987-1988 127 TEETH
1989-1990 127 TEETH
RIGHT HAND
LEFT HAND
1.5L (1456CC) 3EE OHC ENG - 1990-94 - 4 Cyl. - 73 MM Bore (TERCEL) FUEL INJECTED
Belt
Belt Tensioner
B-0233
BT206
BT207
127 TEETH
1991-1994 RIGHT HAND
1991-1994 LEFT HAND
1.5L (1497CC) 5EFE DOHC ENG - 1992-99 - 4 Cyl. - 74.0 MM Bore (1992-99 PASEO) (1995-99
TERCEL)
Belt
Idler
11
B-070-1
B-070
S560
S551
BT66
KIT INCLUDES [B-070], [S560], [S551] & [BT66]
88 TEETH
36 TEETH
18 TEETH
1.5L (1452CC) 3AC OHC ENG - 1981-88 - 4 Cyl. - 77.5 MM Bore (TERCEL)
Belt Tensioner
9
B-070-1
B-070
S560
S551
BT66
B-0208
BT5299
BT5300
128 TEETH
LOWER
UPPER
1.5L (1497CC) 1NZFE DOHC ENG - 2000-14 - 4 Cyl. - 75.0 MM Bore (00-05 ECHO, 2006-14 YARIS)
Timing Kit
3-4214SA
Chain
Cam Sprocket
Chain Tensioner
4214C
S846
BT5565
BT5566
BG5564
Chain Guide
2004-2010 KIT INCLUDES [4214C], [S846], [BG5564], [BT5565],
[BT5566], (DOES NOT INCLUDE INTAKE CAMSHAFT ACTUATOR
OR CRANK SPROCKET)
2000-2010 124 LINKS
2000-2010 86 TEETH EXH.
2000-2010 TENSIONER
2000-2010 TENSIONER ARM
2000-2010 LEFT HAND
1.6L (1587CC) 4AC SOHC ENG - 1983-87 - 4 Cyl. - 81 MM Bore (COROLLA)
Timing Kit
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
B-070-1
B-070
S560
S551
BT66
KIT INCLUDES [B-070], [S560], [S551] & [BT66]
88 TEETH
36 TEETH
18 TEETH
1.6L (1587CC) 4AF DOHC ENG - 1988-89 - 4 Cyl. - 81 MM Bore (COROLLA COUPE DLX, SR5 FWD)
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
B-036
S560
S551
BT66
94 TEETH
36 TEETH
18 TEETH
233
TOYOTA (Continued)
Line
No.
14
Part Title
Cam Sprocket
Crank Sprocket
Belt Tensioner
16
17
18
19
20
B-036-1
B-0236
B-0239
B-036
S560
S560
S551
S551
BT342
BT66
1988-1992 KIT INCLUDES [B-036], [S560], [S551] & [BT66]
1994-1997 117 TEETH COROLLA
1993 94 TEETH
1988-1992 94 TEETH
1988-1992 36 TEETH COROLLA
1990-1993 36 TEETH CELICA- EXH.
1988-1992 18 TEETH
1993 18 TEETH CELICA
1994-1997 COROLLA
1988-1993
1.6L (1587CC) 4AGE DOHC ENG - 1988-91 - 4 Cyl. - 81 MM Bore (COROLLA GTS COUPE FWD)
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
B-0112
B-0176
S622
S631
BT135
1991 113 TEETH
From 4/88 TO 1990 113 TEETH
36 TEETH (2) REQ.
18 TEETH
1.6L (1587CC) 4AGEC DOHC ENG - 1985-87 - 4 Cyl. - 81 MM Bore (COROLLA GTS SPORT COUPE
RWD)
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
B-0112
S622
S631
BT135
113 TEETH
36 TEETH (2) REQ.
18 TEETH
1.6L (1587CC) 4AGELC DOHC ENG - 1985-89 - 4 Cyl. - 81 MM Bore (MR2) (1987-88 COROLLA
FX16 & FX16 GTS)
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
B-0112
S622
S631
BT135
To 3/88 113 TEETH
36 TEETH 2 REQ.
18 TEETH
1.6L (1587CC) 4AGZE DOHC ENG - 1988-89 - 4 Cyl. - 81 MM Bore (MR2 SUPERCHARGED)
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
B-0112
B-0176
S622
S631
BT135
1988 113 TEETH
1989 113 TEETH
36 TEETH (2) REQ.
18 TEETH
1.6L (1587CC) 4ALC SOHC ENG - 1984-88 - 4 Cyl. - 81 MM Bore (COROLLA)
Timing Kit
Belt
Cam Sprocket
Crank Sprocket
Belt Tensioner
B-070-1
B-070
S560
S551
BT66
KIT INCLUDES [B-070], [S560], [S551] & [BT66]
88 TEETH
36 TEETH
18 TEETH
1.6L (1588CC) 2TC OHV ENG - 1971-79 - 4 Cyl. - 85 MM Bore (1971-79 COROLLA) (1972-73
CARINA TAIL)
Timing Kit
Chain
Cam Sprocket
Chain Tensioner
Damper
234
Description
1.6L (1587CC) 4AFE DOHC ENG - 1988-97 - 4 Cyl. - 81 MM Bore (1988-92 COROLLA ALL TRAC
4WD WAGON DLX, SR5) (1990 COROLLA COUPE DLX, SR5) (1988-97 COROLLA SEDAN, 2WD
WAGON STD, DLX, LE) (1990-93 CELICA ST)
Timing Kit
Belt
15
Part No
3DR60-1
3DR60
S479
BT01
BD23
KIT INCLUDES [3DR60], [S465], [S479], [BT01] & [BD23]
60 LINKS
36 TEETH
Line
No.
21
22
23
24
TOYOTA (Continued)
Part Title
Part No
Description
1.8L (1762CC) 7AFE DOHC ENG - 1993-97 - 4 Cyl. - 81 MM Bore (1993-97 COROLLA) (1994-97
CELICA)
Belt
Belt Tensioner
B-0235
BT342
121 TEETH
1993 To 4/97
1.8L (1770CC) 3TC OHV ENG - 1980-82 - 4 Cyl. - 85 MM Bore (COROLLA)
Timing Kit
Chain
Cam Sprocket
Chain Tensioner
Damper
3DR60-1
3DR60
S479
BT01
BD23
KIT INCLUDES [3DR60], [S465], [S479], [BT01] & [BD23]
60 LINKS
36 TEETH
1.8L (1794CC) 1ZZFE DOHC ENG - 1998-08 - 4 Cyl. - 79.0 MM Bore (00-05 CELICA GT, 98-08
COROLLA, 03-08 MATRIX, 00-05 MR2 SPYDER)
Timing Kit
3-4200SA
Cam Sprocket
S846
2000-2008 SOLD AS KIT ONLY; KIT INCLUDES (1) CHAIN,(1)
TENSIONER,(2) GUIDES,(1) CAM SPROCKET,(1) CRANK
SPROCKET, (1) SEAL, (2) SHIMS, (1) PIVOT BOLT NOTE: SHIMS
MUST BE PLACED BEHIND THE CURVE RAIL PIVOT BOLT
86 TEETH
1.8L (1795CC) 2ZZGE DOHC ENG - 2000-06 - 4 Cyl. - 82 MM Bore (00-05 CELICA GTS, 05-06
COROLLA, 03-06 MATRIX)
Timing Kit
3-0420S
SOLD AS KIT ONLY; KIT INCLUDES (1) CHAIN,(1)
TENSIONER,(2) GUIDES,(1) CAM SPROCKET,(1) CRANK
SPROCKET, (1) SEAL
25
1.8L (1839CC) 1CLC OHC ENG - 1984-85 - 4 Cyl. - 83 MM Bore (COROLLA CE80 DIESEL)
26
1.8L (1839CC) 1CTLC OHC ENG - 1984-85 - 4 Cyl. - 83 MM Bore (CAMRY CV10 DIESEL)
27
28
29
30
31
Belt Tensioner
Belt Tensioner
BT124
BT124
1984-1985 LOWER
1984-1985 LOWER
1.9L (1898CC) 8RC OHC ENG - 1969-71 - 4 Cyl. - 86 MM Bore (1971 CELICA) (1971-72 HILUX)
(1969-71 CORONA)
Timing Kit
3DR62-1
Chain
Cam Sprocket
Intermediate Sprocket
3DR62
S479
S490
KIT INCLUDES (2) [3DR62], [S465], [S464], [S479], [S490],
[BT04], [BT03] & [BD24]
62 LINKS (2) REQ.
36 TEETH JACKSHAFT; INNER
24 TEETH CAM DRIVE
2.0L (1968CC) 18RC OHC ENG - 1972-74 - 4 Cyl. - 88 MM Bore (1972-74 CELICA) (1972-74
CORONA) (1972-74 PICKUP) (1972 HILUX)
Timing Kit
3DR62-1
Chain
Cam Sprocket
Intermediate Sprocket
3DR62
S479
S490
KIT INCLUDES (2) [3DR62], [S465], [S464], [S479], [S490],
[BT04], [BT03] & [BD24]
62 LINKS (2) REQ.
36 TEETH JACKSHAFT; INNER
24 TEETH CAM DRIVE
2.0L (1974CC) 2CTLC OHC ENG - 1986-87 - 4 Cyl. - 86 MM Bore (CAMRY CV11 DIESEL)
Belt Tensioner
BT124
1986 LOWER
2.0L (1995CC) 2SELC OHC ENG - 1983-86 - 4 Cyl. - 84 MM Bore (1986 CELICA) (1983-86 CAMRY)
Belt
Belt Tensioner
B-087
BT104
BT111
139 TEETH
1983-1986 RIGHT #1
1983-1986 LEFT #2
2.0L (1998CC) 1AZFE DOHC ENG - 2001-03 - 4 Cyl. - 86 MM Bore (RAV4)
Timing Kit
3-752S
SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(1)
TENSIONER,(3) GUIDES,(1) CAM SPROCKET,(1) CRANK
SPROCKET, (1) OIL PUMP SPROCKET, (1) SEAL, (1) GASKET
235
TOYOTA (Continued)
Line
No.
32
Part Title
Part No
Description
2.0L (1998CC) 3SFE DOHC ENG - 1987-00 - 4 Cyl. - 86 MM Bore (1987-89 CELICA) (1987-91
CAMRY) (1992-95 NOT USED) (1996-00 RAV 4)
Belt
Belt Tensioner
B-0199
B-0199
BT111
BT111
BT301
BT301
1987-1991 163 TEETH
1996-2000 163 TEETH
1987-1991 LOWER #2
1996-2000 LOWER #2
1987-1991 UPPER
1996-2000 UPPER
33
2.0L (1998CC) 3SGELC DOHC ENG - 1986-89 - 4 Cyl. - 86 MM Bore (CELICA)
34
2.0L (1998CC) 3SGTE DOHC ENG - 1988-95 - 4 Cyl. - 86 MM Bore (1988-93 CELICA) (1991-95 MR2)
35
36
Belt
Belt Tensioner
Belt
Belt Tensioner
B-0125
BT111
B-0125
BT111
178 TEETH
1986-1989 LOWER #2
178 TEETH
1988-1995 LOWER #2
2.0L (1998CC) 3YEC OHV ENG - 1984-85 - 4 Cyl. - 86 MM Bore (VAN)
Timing Kit
Chain
Cam Sprocket
Chain Tensioner
Damper
3DR60-1
3DR60
S479
BT01
BD23
KIT INCLUDES [3DR60], [S465], [S479], [BT01] & [BD23]
60 LINKS
36 TEETH
2.2L (2164CC) 5SFE DOHC ENG - 1990-01 - 4 Cyl. - 87 MM Bore (1990-99 CELICA) (1991-95 MR2)
(1992-01 CAMRY) (1999-01 SOLARA)
Belt
Belt Tensioner
B-0199
B-0199
B-0199
BT111
BT301
1990-1993 163 TEETH CELICA GTS WITHOUT TURBO
1991-2001 163 TEETH MR2, CAMRY, SOLARA
1994-1998 163 TEETH CELICA
1990-2001 LOWER #2
1990-2001 UPPER
37
2.2L (2164CC) 5SFNE DOHC - 2000-01 - 4 Cyl. - 87.0 MM Bore (CAMRY) CNG
38
2.2L (2188CC) L OHC ENG - 1981-83 - 4 Cyl. - 90 MM Bore (PICKUP DIESEL)
39
Belt Tensioner
Cam Sprocket
BT301
S594
1981 To 5/82 42 TEETH
2.2L (2189CC) 20R OHC ENG - 1975-80 - 4 Cyl. - 88 MM Bore (CORONA, CELICA & PICKUP)
Timing Kit
Chain
Crank Sprocket
Chain Tensioner
Damper
3DR98-1
3DR98
S459
BT16
BD25
BD26
KIT INCLUDES [3DR98], [S459], [S483], [BT16], [BD26] & [BD25]
98 LINKS
36 TEETH
1975-1980 #1; LEFT HAND
1975-1980 #2; RIGHT HAND
40
2.2L (2237CC) 4YEC OHV ENG - 1986-89 - 4 Cyl. - 91 MM Bore (VAN)
41
2.3L (2253CC) 2M OHC ENG - 1972 - 6 Cyl. - 75 MM Bore MARK II
236
Timing Kit
Chain
Cam Sprocket
Chain Tensioner
Damper
Intermediate Sprocket
Tension Sprocket
Chain Tensioner
Damper
3DR60-1
3DR60
S479
BT01
BD23
S457
S577
BT18
BD43
KIT INCLUDES [3DR60], [S465], [S479], [BT01] & [BD23]
60 LINKS
36 TEETH
30 TEETH
20 TEETH
1972 #1; RIGHT HAND
TOYOTA (Continued)
Line
No.
42
Part Title
Part No
Description
2.4L (2362CC) 2AZFE DOHC ENG - 2001-2013 - 4 Cyl. - 88.5 MM Bore
(CAMRY,COROLLA,HIGHLANDER,MATRIX,RAV4,SOLARA) GAS ENG (INCLUDES TRUCKS)
Timing Kit
3-752S
2001-2011 SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(1)
TENSIONER,(3) GUIDES,(1) CAM SPROCKET,(1) CRANK
SPROCKET, (1) OIL PUMP SPROCKET, (1) SEAL, (1) GASKET
43
2.4L (2362CC) 2AZFXE DOHC - 2007-11 - 4 Cyl. - 88.5 MM Bore (CAMRY) HYBRID
44
2.4L (2366CC) 22R OHC ENG - 1981-90 - 4 Cyl. - 92 MM Bore (1981 CORONA) (1981-84 CELICA)
(1981-90 PICKUP) (CARB ENGS.)
Timing Kit
Timing Kit
3-752S
3DR98-1
3SR96-1
3SR96-1HD
3SR98-1
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Damper
3DR98
3SR96
3SR98
S600
S593
BT100
BT16
BD101
BD102
BD102HD
45
Timing Cover
BD132
BD25
BD26
MOC300
1981-1982 KIT INCLUDES [3DR98], [S459], [S483], [BT16], [BD26]
& [BD25]
1985-1990 KIT INCLUDES [3SR96], [S593], [S600], [BT100],
[BD102] & [BD132] (STANDARD DUTY)
1985-1990 KIT INCLUDES [3SR96], [S593], [S600], [BT100],
[BD102HD], [BD132] (HEAVY DUTY)
1983-1984 KIT INCLUDES [3SR98], [S593], [S600], [BT100],
[BD102] & [BD101]
1981-1982 98 LINKS
1985-1990 96 LINKS
1983-1984 98 LINKS
1983-1990 36 TEETH
1983-1990 18 TEETH
1983-1990
1981-1982
1983-1984 RIGHT HAND #2
1983-1990 LEFT HAND #1; STANDARD DUTY; PLASTIC
CONSTRUCTION
1983-1990 LEFT HAND #1; HEAVY DUTY; STEEL
CONSTRUCTION
1985-1990 RIGHT HAND #2
1981-1982 LEFT HAND #1
1981-1982 RIGHT HAND #2
1984-1990
2.4L (2366CC) 22RE OHC ENG - 1989-95 - 4 Cyl. - 92 MM Bore (2WD & 4WD PICKUP & 4 RUNNER)
(MFI ENGS.)
Timing Kit
3SR96-1
3SR96-1HD
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Damper
46
2007-2010 SOLD AS KIT ONLY; KIT INCLUDES (2) CHAINS,(1)
TENSIONER,(3) GUIDES,(1) CAM SPROCKET,(1) CRANK
SPROCKET, (1) OIL PUMP SPROCKET, (1) SEAL, (1) GASKET
Timing Cover
3SR96
S600
S593
BT100
BD102
BD102HD
BD132
MOC300
KIT INCLUDES [3SR96], [S593], [S600], [BT100], [BD102] &
[BD132] (STANDARD DUTY)
KIT INCLUDES [3SR96], [S593], [S600], [BT100], [BD102HD],
[BD132] (HEAVY DUTY)
96 LINKS
36 TEETH
18 TEETH
LEFT HAND #1; STANDARD DUTY; PLASTIC CONSTRUCTION
LEFT HAND #1; HEAVY DUTY; STEEL CONSTRUCTION
RIGHT HAND #2
2.4L (2366CC) 22REC SOHC ENG - 1983-89 - 4 Cyl. - 92.0 MM Bore (1984-89 PICKUP) (1983-85
CELICA) (MFI ENGS.)
Timing Kit
3SR96-1
1985-1989 KIT INCLUDES [3SR96], [S593], [S600], [BT100],
[BD102] & [BD132] STANDARD DUTY
Continued on Next Page
237
TOYOTA (Continued)
Line
No.
46
Part Title
Timing Kit
3SR96-1HD
Chain
3SR96
3SR98
S600
S593
BT100
BD101
BD102
BD102HD
BD132
MOC300
Timing Cover
Timing Kit
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Damper
49
3SR96-1
3SR96
S600
S593
BT100
BD102
BD102HD
BD132
Timing Kit
3-4167S
Chain
Crank Sprocket
Chain Tensioner
Chain Guide
3SR102
S593
BT359
BG5434
BG5435
KIT INCLUDES [3SR96], [S593], [S600], [BT100], [BD102] &
[BD132] (STANDARD DUTY)
KIT INCLUDES [3SR96], [S593], [S600], [BT100], [BD102HD],
[BD132] (HEAVY DUTY)
96 LINKS
36 TEETH
18 TEETH
STANDARD DUTY; PLASTIC CONSTRUCTION
HEAVY DUTY; STEEL CONSTRUCTION
RIGHT HAND #2
SOLD AS KIT ONLY; KIT INCLUDES (1) CHAIN,(1)
TENSIONER,(2) GUIDES,(1) CAM SPROCKET,(1) CRANK
SPROCKET, (4) SEALS, (6) GASKETS, (1) PIVOT BOLT
102 LINKS CAMSHAFT
18 TEETH
R.H.
L.H.
2.4L (2438CC) 2TZFE DOHC ENG - 1991-95 - 4 Cyl. - 95 MM Bore (PREVIA) (2TZFE
NON-SUPERCHARGED)
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
3SR102
8MMSR60
S754
S771
BT199
BG200
102 LINKS CAMSHAFT
60 LINKS WATER PUMP
36 TEETH LEFT
18 TEETH
1991 To 1/1994
1991 To 1/1994 R.H.
2.4L (2438CC) 2TZFZE DOHC ENG - 1994-97 - 4 Cyl. - 95 MM Bore (PREVIA) (2TZFZE
SUPERCHARGED)
Chain
Cam Sprocket
Crank Sprocket
Chain Tensioner
Chain Guide
238
1983-1984 RIGHT HAND #2
LEFT HAND #1; STANDARD DUTY; PLASTIC CONSTRUCTION
LEFT HAND #1; HEAVY DUTY; STEEL CONSTRUCTION
1985-1989 RIGHT HAND #2
1984-1989
2.4L (2438CC) 2RZFE DOHC ENG - 1995-04 - 4 Cyl. - 95 MM Bore (TACOMA 2WD)
Chain
50
1985-1989 KIT INCLUDES [3SR96], [S593], [S600], [BT100],
[BD102HD], [BD132] HEAVY DUTY
1985-1989 96 LINKS
1983-1984 98 LINKS
36 TEETH
18 TEETH
2.4L (2366CC) 22RTEC OHC ENG - 1985-88 - 4 Cyl. - 92 MM Bore (TRUCKS) (OHC TURBO ENGS.)
3SR96-1HD
48
Description
2.4L (2366CC) 22REC SOHC ENG - 1983-89 - 4 Cyl. - 92.0 MM Bore (1984-89 PICKUP) (1983-85
CELICA) (MFI ENGS.) (Continued)
Cam Sprocket
Crank Sprocket
Chain Tensioner
Damper
47
Part No
3SR102
8MMSR60
S754
S771
BT359
BG5434
BG5435
102 LINKS CAMSHAFT
60 LINKS WATER PUMP
36 TEETH LEFT
18 TEETH
R.H.
L.H.
TOYOTA (Continued)
Line
No.
Part Title
Part No
Description
51
2.5L (2508CC) 2VZFE DOHC ENG - 1988-91 - V6 - 87 MM Bore (CAMRY)
52
2.6L (2563CC) 4M SOHC ENG - 1971-79 - 6 Cyl. - 80.0 MM Bore (1978-79 CRESSIDA) (1973-76
MARK II, 1973 MARK II CORONA) (1971-73 CROWN) ENG NOT USED IN 1977
Belt
Intermediate Sprocket
Tension Sprocket
Chain Tensioner
53
54
55
Damper
Intermediate Sprocket
Chain Tensioner
Chain Tensioner
60
BT358
Timing Kit
3-3SRH106
Chain
3SRH106
8MMSRH82
S754
S593
BT358
BT359
BD361
BD362
BD363
BD364
BG360
Chain Guide
30 TEETH
2005-2007 SECONDARY
KIT INCLUDES [3SRH106], [8MMSRH82], [S754], [S593], [BT358],
[BT359], [BG360], [BD361], [BD362], [BD363], [BD364]
1994-2004 106 LINKS OUTER
1994-2004 82 LINKS INNER
1994-2004 36 TEETH INTAKE
1994-2004 18 TEETH OUTER
1994-2004 INNER
1994-2004 OUTER
1994-2004 OUTER LEFT HAND
1994-2004 INNER UPPER
1994-2004 INNER LOWER
1994-2004 INNER LEFT HAND
1994-2004 OUTER RIGHT HAND
2.8L (2754CC) 5ME OHC ENG - 1981-82 - 6 Cyl. - 83 MM Bore (1981-82 CELICA-SUPRA) (1981-82
CRESSIDA-MX6)
Intermediate Sprocket
Chain Tensioner
S457
BT68
30 TEETH
2.8L (2754CC) 5MGE DOHC ENG - 1982-88 - 6 Cyl. - 83 MM Bore (1982-86 CELICA-SUPRA)
(1982-88 CRESSIDA-MX6 & MX7)
Belt Tensioner
B-0101
B-074
BT96
1984-1988 169 TEETH
1982-1983 142 TEETH
3.0L (2959CC) 3VZE SOHC ENG - 1988-95 - V6 - 87.5 MM Bore (1988-95 PICKUP & 4 RUNNER)
(1993-94 T100)
Belt
59
S457
BT68
2.7L (2694CC) 3RZFE DOHC ENG - 1994-04 - 4 Cyl. - 95 MM Bore (96-00 4-RUNNER, 94-98 T100
PICKUP & 95-04 TACOMA)
Belt
58
30 TEETH
20 TEETH
1971-1976
1978-1979 CRESSIDA
#1; RIGHT HAND
2.7L (2694CC) 2TRFE DOHC ENG - 2005-13 - 4 Cyl. - 95.0 MM Bore (TACOMA,4RUNNER)
Damper
57
S457
S577
BT18
BT68
BD43
179 TEETH
2.6L (2563CC) 4ME OHC ENG - 1979-80 - 6 Cyl. - 80 MM Bore (CELICA & CRESSIDA)
Cam Sprocket
Crank Sprocket
Chain Tensioner
56
B-0157
Belt Tensioner
B-0154
B-0240
BT209
1988-1992 193 TEETH
1993-1995 193 TEETH
LOWER
3.0L (2959CC) 3VZFE DOHC ENG - 1992-93 - V6 - 87.5 MM Bore (CAMRY)
Belt
B-0200
191 TEETH
3.0L (2954CC) 7MGE, 7MGTE DOHC ENG - 1986-92 - 6 Cyl. - 83 MM Bore (1986-92 SUPRA 7MGE)
(1989-92 CRESSIDA 7MGE) (1987-92 SUPRA 7MGTE TURBO)
Belt
Belt Tensioner
B-0126
B-0237
BT205
1986-1990 159 TEETH
1991-1992 159 TEETH
239
TOYOTA (Continued)
Line
No.
61
62
63
64
Part Title
Part No
Description
3.0L (2995CC) 1MZFE DOHC ENG - 1994-06 - V6 - 87.5 MM Bore (94-06 CAMRY) (95-04 AVALON)
(98-03 SIENNA VAN) (99-03 SOLARA) (01-03 HIGHLANDER)
B-0257
Belt
211 TEETH
3.0L (2997CC) 2JZGE DOHC ENG - 1993-97 - 6 Cyl. - 86 MM Bore (ALSO 2JZGTE) (SUPRA)
B-0215
Belt
143 TEETH
3.4L (3378CC) 5VZFE DOHC ENG - 1995-04 - V6 - 93.5 MM Bore (00-04 TUNDRA, 96-02 4-RUNNER,
95-98 T100 & 95-04 TACOMA)
B-0271
Belt
191 TEETH
3.5L (3456CC) 2GRFE DOHC ENG - 2005-13 - V6 - 94 MM Bore
(AVALON,CAMRY,HIGHLANDER,RAV4,SIENNA,VENZA) 24V GAS ENG. (INCLUDES TRUCKS)
3-0490S
Timing Kit
2005-2011 SOLD AS KIT ONLY; KIT INCLUDES (3) CHAINS,(3)
TENSIONERS,(4) GUIDES, (1) CRANK SPROCKET, (1) IDLER
SPROCKET
65
3.9L (3878CC) F OHV ENG - 1960-74 - 6 Cyl. - 90 MM Bore (LANDCRUISER FJ40 & FJ55)
66
4.0L (3956CC) 1GRFE DOHC ENG - 2003-13 - V6 - 94.0 MM Bore (4RUNNER,FJ CRUISER,TACOMA,
TUNDRA)
2202
2203
Cam Gear
Crank Gear
54 TEETH
27 TEETH
3-0470S
Timing Kit
2003-2011 SOLD AS KIT ONLY; KIT INCLUDES (3) CHAINS,(3)
TENSIONERS,(4) GUIDES,(2) EXH. CAM SPROCKETS,(1)
CRANK SPROCKET, (1) IDLER SPROCKET 4 RUNNER,FJ
CRUISER,TACOMA,TUNDRA
67
4.2L (4227CC) 2F OHV ENG - 1975-87 - 6 Cyl. - 94 MM Bore (LANDCRUISER FJ40, FJ55, FJ60)
68
4.7L (4663CC) 2UZFE DOHC ENG - 1998-09 - 8 Cyl. - 3.70 Bore (TUNDRA, SEQUOIA, LAND
CRUISER, 4RUNNER)
2202
2203
Cam Gear
Crank Gear
54 TEETH
27 TEETH
B-0298
BT5525
BT6003
BT5259
Belt
Belt Tensioner
Idler
211 TEETH INTERFERENCE ENGINE
TENSIONER PULLEY
TENSIONER
BELT IDLER
TRIUMPH
4 Cyl.
Engine
Year
Line
1147CC OHV
1961-67
1
1296CC OHV
1967-72
2
Line
No.
Part Title
Engine
4 Cyl. (Continued)
1493CC OHV
Part No
Year
Line
1975-80
3
Year
Line
1998CC OHV
1967-73
4
2498CC OHV
1968-76
5
6 Cyl.
Engine
Description
1
1147CC OHV ENG - 1961-67 - 4 Cyl. - 2.7279 Bore (HERALD, SPITFIRE MK I & II)
2
1296CC OHV ENG - 1967-72 - 4 Cyl. - 2.8995 Bore (SPITFIRE MK III & IV)
3
4
5
240
Chain
Chain
3SR62
3SR62
62 LINKS
62 LINKS
1493CC OHV ENG - 1975-80 - 4 Cyl. - 2.8995 Bore (SPITFIRE MK IV)
Chain
3SR62
62 LINKS
1998CC OHV ENG - 1967-73 - 6 Cyl. - 74.7 MM Bore (1967-73 GT6) (1967 2000)
Chain
3SR62
62 LINKS
2498CC OHV ENG - 1968-76 - 6 Cyl. - 2.9405 Bore (TR6 & TR250)
Chain
3DR62
3SR62
62 LINKS EXC. 1968 TR250
1968 62 LINKS TR250
VOLKSWAGEN
Year
Line
Year
Line
Year
Line
1.5 (1457CC) OHC
1978-80
1
1.5 (1471CC) OHC
1977-80
2
1.7 (1715CC) OHC
1982-83
12
1.7-A,B (1715CC) SOHC
1981-84
13
2.0 (1984CC) SOHC
1998-00
23
2.0 (1984CC) SOHC
1993-02
1.5 (1471CC) OHC
1974-75
3
1.8 (1780CC) DOHC
1986-89
24
14
2.0 (1984CC) DOHC
1990-93
1.6 (1588CC) SOHC
1985-92
4
1.8 (1780CC) OHC
25
1987-93
15
2.0 (1984CC) DOHC
2006-13
1.6 (1588CC) SOHC
1985
5
25
1.8 (1780CC) OHC
1984-85
16
6
1.8 (1780CC) OHC
1993-97
17
5 Cyl.
1.6 (1588CC) SOHC
1983-84
1.6-H (1588CC) SOHC
1982-84
2.2 (2144CC) OHC
1984
26
7
1.8 (1780CC) OHC
1990-92
18
2.2 (2144CC) OHC
1983
1.6 (1588CC) SOHC
27
1982-84
8
1.8.0 (1781CC) DOHC
1998-06
19
2.2 (2226CC) SOHC
1985-88
1.6 (1588CC) SOHC
28
1976-80
9
1.8 (1780CC) SOHC
1983-93
20
1.6 (1588CC) SOHC
1976-80
10
1.9 (1896CC) SOHC
1996-06
21
6 Cyl.
1992-02
29
1.6 (1588CC) SOHC
1981-83
11
2.0 (1967CC) SOHC
2004-05
22
4 Cyl.
Engine
Line
No.
1
2
3
4
5
6
7
8
Part Title
Engine
4 Cyl. (Continued)
Part No
Engine
4 Cyl. (Continued)
2.8 (2792CC) SOHC
Description
1.5 (1457CC) OHC ENG - 1978-80 - 4 Cyl. - 79.5 MM Bore (1978-80 RABBIT-ENG CODE EH, FX &
EN) (1978-79 SCIROCCO ENG CODE EH & EN)
Belt
Belt Tensioner
B-017
BT148
121 TEETH
1.5 (1471CC) OHC ENG - 1977-80 - 4 Cyl. - 76.5 MM Bore (DIESEL) (1979-80 DASHER) (1977-80
RABBIT) (1980 PICK-UP) (ENG CODE CK)
Belt
Belt Tensioner
B-043
BT89
135 TEETH
1.5 (1471CC) OHC ENG - 1974-75 - 4 Cyl. - 76.5 MM Bore (GAS) (1974-75 DASHER ENG CODES
XR,XS XV,XW,XY,XZ) (1974-75 RABBIT ENG CODES FC & FG) (1975 SCIROCCO ENG CODES FC &
FG)
Belt
Belt Tensioner
B-017
BT148
121 TEETH
1.6 (1588CC) SOHC ENG - 1985-92 - 4 Cyl. - 79.5 MM Bore (DIESEL) (1985-88 GOLF ENG CODE
ME) (1985-86 & 1989-91 JETTA ENG CODE ME)(1985-86 & 1989-92 JETTA ENG CODE MF) (1992
JETTA ENG CODE 1V)
Belt
Crank Sprocket
Belt Tensioner
B-043
S663
BT89
135 TEETH
1985-1989 22 TEETH
1.6 (1588CC) SOHC ENG - 1985 - 4 Cyl. - 79.5 MM Bore (TURBO DIESEL ENG)(QUANTUM)(ENG
CODE MD)
Belt
Crank Sprocket
Belt Tensioner
B-043
S663
BT89
135 TEETH
22 TEETH
1.6 (1588CC) SOHC ENG - 1983-84 - 4 Cyl. - 79.5 MM Bore (DIESEL ENG)(RABBIT & JETTA)(ENG
CODE JK)
Belt
Crank Sprocket
Belt Tensioner
B-043
S663
BT89
135 TEETH
22 TEETH
1.6-H (1588CC) SOHC ENG - 1982-84 - 4 Cyl. - 79.5 MM Bore (TURBO DIESEL ENG)(1983 RABBIT,
1983-84 JETTA & 1982-84 QUANTUM)(ENG CODE CY)
Belt
Crank Sprocket
Belt Tensioner
B-043
S663
BT89
135 TEETH
1983-1984 22 TEETH
1.6 (1588CC) SOHC ENG - 1982-84 - 4 Cyl. - 79.5 MM Bore (DIESEL ENG)(VANAGON)(ENG CODE
CS)
Belt
B-043
135 TEETH
Continued on Next Page
241
VOLKSWAGEN (Continued)
Line
No.
8
9
10
11
12
13
14
15
16
17
18
19
Part Title
Description
1.6 (1588CC) SOHC ENG - 1982-84 - 4 Cyl. - 79.5 MM Bore (DIESEL ENG)(VANAGON)(ENG CODE
CS) (Continued)
Crank Sprocket
Belt Tensioner
S663
BT89
1983-1984 22 TEETH
1.6 (1588CC) SOHC ENG - 1976-80 - 4 Cyl. - 79.5 Bore (GAS) (1980 JETTA) (1976-77 & 80 RABBIT,
RABBIT PICK UP) (1976-77 & 1979-80 SCIROCCO) (ENG. CODES EE, EJ & FN) (NOT PRODUCED
IN 1978)
Belt
Belt Tensioner
B-017
BT148
121 TEETH
1.6 (1588CC) SOHC ENG - 1976-80 - 4 Cyl. - 79.5 MM Bore (GAS) (DASHER YG,YH,YK ENG
CODES)
Belt
Belt Tensioner
B-017
BT148
121 TEETH
1.6 (1588CC) SOHC ENG - 1981-83 - 4 Cyl. - 79.5 MM Bore (DIESEL) (1981 DASHER) (1981-82
JETTA) (1981-83 RABBIT) (1981-83 RABBIT PICK-UP) (ALL ENG CODES CR)
Belt
Belt Tensioner
B-043
BT89
135 TEETH
1981
1.7 (1715CC) OHC ENG - 1982-83 - 4 Cyl. - 79.5 MM Bore (GAS ENG)(QUANTUM)(ENG CODE WT)
Belt
Cam Sprocket
Belt Tensioner
B-017
S658
BT148
121 TEETH
1983 44 TEETH
1.7-A,B (1715CC) SOHC ENG - 1981-84 - 4 Cyl. - 79.5 MM Bore (GAS ENG)(1981-84 JETTA,RABBIT)
(1981-83 PICK-UP)(1981-83 SCIROCCO)(ENG CODE EN & JF)
Belt
Cam Sprocket
Belt Tensioner
B-017
S658
BT148
121 TEETH
1983-1984 44 TEETH
1.8 (1780CC) DOHC ENG - 1986-89 - 4 Cyl. - 81 MM Bore (GAS ENG)(SCIROCCO,JETTA GLI,GOLF
GTI) 16V (ENG CODE PL)(DOHC)
Belt
B-0133
147 TEETH
1.8 (1780CC) OHC ENG - 1987-93 - 4 Cyl. - 81 MM Bore (GAS ENG)(FOX)(ENG CODE JN,UM & ABG)
Belt
Cam Sprocket
Belt Tensioner
B-017
S658
BT148
121 TEETH
44 TEETH
1.8 (1780CC) OHC ENG - 1984-85 - 4 Cyl. - 81 MM Bore (GAS ENG)(QUANTUM)(ENG CODE JN)
Belt
Cam Sprocket
Belt Tensioner
B-017
S658
BT148
121 TEETH
44 TEETH
1.8 (1780CC) OHC ENG - 1993-97 - 4 Cyl. - 81 MM Bore (GOLF, JETTA)(ENG CODE ACC)
Belt
Cam Sprocket
Belt Tensioner
B-017
S658
BT148
1993-1996 121 TEETH
44 TEETH
1.8 (1780CC) OHC ENG - 1990-92 - 4 Cyl. - 81 MM Bore (CORRADO G60) (ENG CODE PG)
Belt
Cam Sprocket
Belt Tensioner
B-017
S658
BT148
121 TEETH
44 TEETH
1.8 (1781CC) DOHC ENG - 1998-06 - 4 Cyl. - 81.0 MM Bore (1999-05 BEETLE) (2000-06 GOLF &
JETTA) (1998-05 PASSAT) (ENG CODES AEB,APH,ATW,AVG,AWD,AWM,AWP,AWV,AWW,BKF)
Belt
Continued on Next Page
242
Part No
B-0291
1998-1999 152 TEETH (INTERFERENCE ENG APPLICATION)
PASSAT ENG CODE AEB W/152T BELT
VOLKSWAGEN (Continued)
Line
No.
19
Part Title
21
23
24
25
26
27
28
29
B-0306
150 TEETH (INTERFERENCE ENG APPLICATION) GOLF GLS,
NEW BEETLE GLS W/ENG CODES AWP, AWV, AWW, AWD, APH
1.8 (1780CC) SOHC ENG - 1983-93 - 4 Cyl. - 81.0 MM Bore (GAS ENG)(1984-92 JETTA)(1984-87
SCIROCCO)(1985-92 GOLF)(1983-84 RABBIT)(1997-93 FOX)(1990-92 CORRADO)(1984-85
QUANTUM)(1985-93 CABRIOLET) (ENG CODES GX,HT,RD,RV,PF,2H,JH)
Belt
Cam Sprocket
Belt Tensioner
B-017
S658
BT148
121 TEETH
44 TEETH
1.9 (1896CC) SOHC ENG - 1996-06 - 4 Cyl. - 79.5 MM Bore (PASSAT 1996-98) (GOLF, JETTA
1996-06) (NEW BEETLE 1998-06) DIESEL 1998-05) (ENG. CODE AAZ,AHU,1Z,ALH,BEW,BRM)
Belt
22
Description
1.8 (1781CC) DOHC ENG - 1998-06 - 4 Cyl. - 81.0 MM Bore (1999-05 BEETLE) (2000-06 GOLF &
JETTA) (1998-05 PASSAT) (ENG CODES AEB,APH,ATW,AVG,AWD,AWM,AWP,AWV,AWW,BKF)
(Continued)
Belt
20
Part No
Crank Sprocket
B-0301
B-0301
S663
1998-2000 141 TEETH NEW BEETLE
1998 To 02/01 141 TEETH GOLF, JETTA
1996-1998 22 TEETH
2.0 (1967CC) SOHC ENG - 2004-05 - 4 Cyl. - 81 MM Bore (PASSAT) (ENG CODE BHW) TURBO
DIESEL
Belt
B-0333
120 TEETH
2.0 (1984CC) SOHC ENG - 1998-00 - 4 Cyl. - 82.5 MM Bore (JETTA,GOLF,NEW BEETLE) (ENG.
CODE AEG)
Belt
B-0296
138 TEETH
2.0 (1984CC) SOHC ENG - 1993-02 - 4 Cyl. - 82.5 MM Bore (1993-99 GOLF,JETTA) (1995-96
PASSAT) (1995-02 GOLF CABRIO CONVERTIBLE) (ENG CODE ABA)
Belt
Cam Sprocket
Belt Tensioner
B-0262
S658
BT148
1993-1999 124 TEETH
1996-2001 44 TEETH
1993-1997
2.0 (1984CC) DOHC ENG - 2006-13 - 4 Cyl. - 82.6 MM Bore (2012-13 BEETLE,2009-13 CC,2007-13
EOS,2012-13 GOLF,2006-13 GTI,JETTA 2006-13,2006-10 PASSAT,2009-10 PASSAT CC,2009-13
TIGUAN) (BPY,CBFA,CCTA,CRZA) 16V TURBO (INCLUDES TRUCKS)
Belt
B-0334
2006-2008 148 TEETH EOS, GTI, JETTA, PASSAT
2.2 (2144CC) OHC ENG - 1984 - 5 Cyl. - 79.5 MM Bore (QUANTUM)(ENG CODE KM)
Belt
Cam Sprocket
Crank Sprocket
B-0127
S658
S581
120 TEETH
44 TEETH
22 TEETH
2.2 (2144CC) OHC ENG - 1983 - 5 Cyl. - 79.5 MM Bore (QUANTUM)(ENG CODE WE)
Cam Sprocket
Crank Sprocket
S658
S581
44 TEETH
22 TEETH
2.2 (2226CC) SOHC ENG - 1985-88 - 5 Cyl. - 81.0 MM Bore (QUANTUM & QUANTUM SYNCHRO
4WD)(ENG CODE JT & KX)
Belt
Cam Sprocket
Crank Sprocket
B-0127
S658
S581
120 TEETH
44 TEETH
22 TEETH
2.8 (2792CC) SOHC ENG - 1992-02 - V6 - 81 MM Bore (CORRADO 1992-95, GOLF 1995-02, JETTA
1994-02, PASSAT 1993-97) (ENG CODES AAA,AFP)
Belt
B-0297
1998-2001 253 TEETH
243
VOLVO
4 Cyl.
Engine
Year
Line
5 Cyl.
Engine
Year
Line
1.9 (1948CC) DOHC
2000-04
1
2.3 (2319CC) DOHC
1995-98
6
2.1 (2127CC) SOHC
1976-85
2
2.3 (2319CC) DOHC
1998-04
7
2.3 (2316CC) DOHC
1989-92
3
2.4 (2435CC) DOHC
1993-10
8
2.3 (2316CC) SOHC
1985-95
4
2.3 (2316CC) SOHC
1983-84
5
6 Cyl.
1976-79
9
Line
No.
1
Part Title
2.7 (2673CC) SOHC
Part No
Engine
Year
Line
2.8-6 (2849CC) SOHC
1980-90
10
2.9 (2917CC) DOHC
1992-05
11
6 Cyl. (Continued)
Description
1.9 (1948CC) DOHC ENG - 2000-04 - 4 Cyl. - 83 MM Bore (S40,V40) B4204T,B4204T2,B4204T3
(TURBO)
Belt
B-0311
B-0331
2000-2001 142 TEETH INTERFERENCE ENGINE APPLICATION
2002-2004 142 TEETH INTERFERENCE ENGINE APPLICATION
2
2.1 (2127CC) SOHC ENG - 1976-85 - 4 Cyl. - 92 MM Bore (B21A,B21F,B21FT)
3
2.3 (2316CC) DOHC ENG - 1989-92 - 4 Cyl. - 96 MM Bore (B234F) 740, 940
Belt
Cam Sprocket
Belt
B-032
S676
B-0173
B-0174
B-0198
4
5
6
7
Belt
Cam Sprocket
B-0234
B-032
S676
Belt
Cam Sprocket
Crank Sprocket
B-032
S676
S677
244
123 TEETH
38 TEETH
19 TEETH
2.3 (2319CC) DOHC ENG - 1995-98 - 5 Cyl. - 81 MM Bore (BEFORE VIN 1266127) 850, C70, S70,
V70 (B5234T,B5234T1,B5234T3,B5234T5,B5234T6)
Belt
B-0252
148 TEETH INTERFERENCE ENGINE APPLICATION
2.3 (2319CC) DOHC ENG - 1998-04 - 5 Cyl. - 81 MM Bore (AFTER VIN 1266128) C70, S60, S70, V70
(B5234T3,B5234T6,B5234T8, B5234T9)
B-0311
B-0331
1998-2001 142 TEETH INTERFERENCE ENGINE APPLICATION
2002-2004 142 TEETH INTERFERENCE ENGINE APPLICATION
2.4 (2435CC) DOHC ENG - 1993-10 - 5 Cyl. - 83.0 MM Bore (850,C70,S40,S60,S70,V50,V70)
Belt
B-0217
B-0311
10
1993-1995 123 TEETH
1985-1992 123 TEETH
1985-1992 38 TEETH
2.3 (2316CC) SOHC ENG - 1983-84 - 4 Cyl. - 96 MM Bore (B23F,B23FT)
B-0252
9
1989 164 TEETH TIMING BELT (INTERFERENCE ENGINE
APPLICATION) 740 SERIES
1989 110 TEETH BAL. SHAFT (INTERFERENCE ENGINE
APPLICATION) 740 SERIES
1991-1992 167 TEETH TIMING BELT (INTERFERENCE ENGINE
APPLICATION) 940 SERIES
2.3 (2316CC) SOHC ENG - 1985-95 - 4 Cyl. - 96 MM Bore (B230F,B230FD,B230FT)
Belt
8
123 TEETH
38 TEETH
B-0331
1993 Early 1993 143 TEETH (BEFORE VIN 1266127)
INTEFERENCE ENGINE APPLICATION
1994-1998 148 TEETH (BEFORE VIN 1266127) INTERFERENCE
ENGINE APPLICATION
1998-2001 142 TEETH (AFTER VIN 1266128) INTERFERENCE
ENGINE APPLICATION
2002-2004 142 TEETH INTERFERENCE ENGINE APPLICATION
2.7 (2673CC) SOHC ENG - 1976-79 - V6 - 88 MM Bore (262,264,265) (B27F)
Chain
3SR44
3SR94
44 LINKS OIL PUMP
94 LINKS CAMSHAFT
2.8-6 (2849CC) SOHC ENG - 1980-90 - V6 - 90.9 MM Bore (B28F,B280F)
Chain
3SR44
3SR94
44 LINKS OIL PUMP
94 LINKS CAMSHAFT
VOLVO (Continued)
Line
No.
11
Part Title
Part No
Description
2.9 (2917CC) DOHC ENG - 1992-05 - 6 Cyl. - 83 MM Bore
(B6294S,B6294S2,B6294T,B6304F,B6304S,B6304S2) INCLUDES TRUCKS
B-0217
Belt
1992-1993 143 TEETH
WAUKESHA
6 Cyl.
Engine
Year
180GLB
Line
Engine
6 Cyl. (Continued)
1
Line
No.
Part Title
190DLC DIESEL
Line
2
Part No
180GLB ENG - 6 Cyl. - 3 1/2 Bore
2
190DLC DIESEL ENG - 6 Cyl. - 3 3/4 Bore
5401
Crank Gear
6 Cyl. (Continued)
Year
190GLB
Line
3
30 TEETH
5401
Crank Gear
Engine
Description
1
3
Year
30 TEETH
190GLB ENG - 6 Cyl. - 3 3/4 Bore
5401
Crank Gear
30 TEETH
WHITE PDQ TRUCKS
6 Cyl.
Engine
170,225
Line
No.
Year
Line
1961-66
1
Part Title
8 Cyl.
Engine
318
Year
Line
1961-66
2
Part No
170,225 ENG - 1961-66 - 6 Cyl. - 3.40 Bore (96A,97A)
2
318 ENG - 1961-66 - 8 Cyl. - 3.91 Bore (98A)
3-495S
495
S291
348
S274
Chain
Crank Sprocket
Year
Line
Description
1
3pc Set
Chain
Crank Sprocket
Engine
INCLUDES [495], [S314] & [S291]
50 LINKS
19 TEETH
68 LINKS
23 TEETH
WHITE TRUCK
8 Cyl.
Engine
Year
Line
EN601
1
EN602
2
Line
No.
Part Title
4 Cyl.
Engine
134
Part No
2
EN602 ENG - 8 Cyl. - 3.9375 Bore (CHEV. ENG. 366)
3
4
3pc Set
Chain
Cam Sprocket
Crank Sprocket
3-171S
168
S394
S395
8 Cyl.
Engine
350
Year
Line
4
Description
EN601 ENG - 8 Cyl. - 4.000 Bore (CHEV. ENG. 327)
3-163S
163
S288
S289
Line
3
1
3pc Set
Chain
Cam Sprocket
Crank Sprocket
Year
INCLUDES [163], [S288] & [S289]
58 LINKS
44 TEETH
22 TEETH
INCLUDES [168], [S394] & [S395] 1969 & LATER
66 LINKS 1969 & LATER
50 TEETH 1969 & LATER
25 TEETH 1969 & LATER
134 ENG - 4 Cyl. - 3 1/8 Bore (WILLYS ENG)
Cam Gear
Crank Gear
2900
2901
56 TEETH FIBER
28 TEETH
350 ENG - 8 Cyl. - 4.000 Bore (CHEV. ENG.)
3pc Set
Chain
3-163S
163
INCLUDES [163], [S288] & [S289]
58 LINKS
Continued on Next Page
245
WHITE TRUCK (Continued)
Line
No.
4
246
Part Title
Part No
Description
350 ENG - 8 Cyl. - 4.000 Bore (CHEV. ENG.) (Continued)
Cam Sprocket
Crank Sprocket
S288
S289
44 TEETH
22 TEETH
TM
MELL-GEAR Marine
Marine Listings
248
248
249
251
Chrysler Marine
Ford Marine
Mercury Marine
OMC
ENGINE PARTS
TM
CYLINDER SLEEVES TM
A
COMPANY
247
CHRYSLER MARINE
Engine
Year
Line
V8
Engine
Year
Line
V8
Engine
270 (4.4)
1
4
(Continued)
400 (6.6)
273 (4.5)
2
360 (5.9)
5
440 (7.2)
318 (5.2)
3
383 (6.3)
6
Line
No.
1
Part Title
Part No
340 (5.6) ENG - V8 - 4.04 Bore (250, CHRYSLER III, SUPERBEE III, JET III, SUPERBEE V-DRIVE III)
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
40406
360 (5.9) ENG - V8 - 4.000 Bore (CHRYSLER JET, SUPERBEE V-DRIVE III, SUPERBEE III-VOLVO)
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
40406
383 (6.3) ENG - V8 - 4.25 Bore (M383, M383B, 260, 280)
INCLUDES [501], [S366] & [S367] W/SILENT TYPE CHAIN
3-501SA
400 (6.6) ENG - V8 - 4.342 Bore (280)
Chain
Crank Sprocket
8
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
40406
3pc Set
7
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
318 (5.2) ENG - V8 - 3.91 Bore (M80, M80A, 195, 195 SPECIAL, STERN DRIVE 195, 225, STERN
DRIVE 240, 915, SUPERBEE II, JET II, SUPERBEE V-DRIVE)
3pc Set
6
68 LINKS
23 TEETH
40406
3pc Set
5
8
273 (4.5) ENG - V8 - 3 5/8 Bore (175, 200, SUPERBEE)
3pc Set
4
7
Description
348
S274
3pc Set
3
Line
270 (4.4) ENG - V8 - 3.625 Bore (ROYAL M44S)
Chain
Crank Sprocket
2
Year
V8
(Continued)
340 (5.6)
66 LINKS
25 TEETH
168
S339
440 (7.2) ENG - V8 - 4.320 Bore (300, 330, 335, 375)
3pc Set
INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON 3 BOLT
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT. USE W/3 BOLT CAM
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT. SINGLE BOLT CAM
40217
40407
FORD MARINE
Engine
Year
Line
V8
Engine
289 (4.7)
1
(Continued)
351W (5.8)
302 (5.0)
2
429 (7.0)
Line
No.
1
Part Title
Line
Part No
Engine
Year
Line
V8
3
4
(Continued)
460 (7.5)
5
Description
289 (4.7) ENG - V8 - 4.000 Bore (BERKLEY JET DRIVE, CRUSADER, FORD MARINE, DEARBORN,
HOLMAN-MOODY, INTERCEPTOR/CONQUEROR)
3pc Set
248
Year
V8
40402
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
FORD MARINE (Continued)
Line
No.
2
Part Title
Part No
302 (5.0) ENG - V8 - 4.000 Bore (BERKLEY JET DRIVE, COMMANDER, CRUSADER, DEARBORN,
FORD MARINE, GLASTRON, HOLMAN-MOODY, INDMAR, MERCRUISER, OMC, OSCO, PALMER,
PLEASURECRAFT, VOLVO-PENTA, WAUKESHA, INTERCEPTOR/CONQUEROR)
3pc Set
3
351W (5.8) ENG - V8 - 4.000 Bore (BERKLEY JET DRIVE, COMMANDER, CRUSADER, DEARBORN,
FORD MARINE, GLASTRON, HOLMAN-MOODY, INDMAR, MERCRUISER,
INTERCEPTOR/CONQUEROR, OMC, OSCO, PALMER, PLEASURECRAFT, VOLVO-PENTA,
WAUKESHA)
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
40402
429 (7.0) ENG - V8 - 4.360 Bore (FORD MARINE)
3pc Set
5
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
40402
3pc Set
4
Description
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
40403
460 (7.5) ENG - V8 - 4.360 Bore (BERKLEY JET DRIVE, CHRYSLER MARINE, COMMANDER, FORD
MARINE, HARDEN, HOLMAN-MOODY, INDMAR, OMC, PLEASURECRAFT)
3pc Set
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
40403
MERCURY MARINE
Engine
Year
Line
4 Cyl.
Engine
1
262 (4.3)
181 (3.0)
2
V8
V6
229 (3.8)
3
6 Cyl.
250 (4.1)
Line
No.
4
Part Title
Line
10
351W (5.8)
11
283 (4.6)
6
427 (7.0)
12
302 (5.0)
7
454 (7.4)
13
305 (5.0)
8
502 (8.2)
14
327 (5.4)
9
Part No
Description
2528S
ALUM. CAM GEAR & STEEL CRANK GEAR
2528S
ALUM. CAM GEAR & STEEL CRANK GEAR
40400
BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT. FOR STD. DRIVE
ROTATION
250 (4.1) ENG - 6 Cyl. - 3 7/8 Bore (MERCRUISER 160, 165)
Gear Set
5
5
(Continued)
350 (5.7)
229 (3.8) ENG - V6 - 3.736 Bore (MERCRUISER 185)
3pc Set
4
Year
V8
181 (3.0) ENG - 4 Cyl. - 4.000 Bore (MERCRUISER 140, 3.0/3.0LX)
Gear Set
3
Engine
153 (2.5) ENG - 4 Cyl. - 3 7/8 Bore (MERCRUISER 120)
Gear Set
2
Line
V6
153 (2.5)
1
Year
2528S
ALUM. CAM GEAR & STEEL CRANK GEAR
262 (4.3) ENG - V6 - 4.000 Bore (MERCRUISER 175/4.3L, 185, 205, 205 4.3LX)
3pc Set
3-509S
INCLUDES [499], [S776] & [S505] STOCK REPLACEMENT TYPE 3
PC SET
Continued on Next Page
249
MERCURY MARINE (Continued)
Line
No.
5
Part Title
7
9
10
11
3pc Set
40400
Cam Gear
Crank Gear
2534
2535
BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT. FOR STD. DRIVE
ROTATION
58 TEETH FOR REVERSE DRIVE ROTATION
29 TEETH FOR REVERSE DRIVE ROTATION
40402
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
305 (5.0) ENG - V8 - 3.736 Bore (MERCRUISER 200/5.0L, 228, 230/5.0L MIE, 230/5.0LX, 898,
898/198)
3pc Set
40400
Cam Gear
Crank Gear
2534
2535
BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT. FOR STD. DRIVE
ROTATION
58 TEETH FOR REVERSE DRIVE ROTATION
29 TEETH FOR REVERSE DRIVE ROTATION
327 (5.4) ENG - V8 - 4.000 Bore (MERCRUISER 225, 250)
3pc Set
40400
Cam Gear
Crank Gear
2534
2535
BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT. FOR STD. DRIVE
ROTATION
58 TEETH FOR REVERSE DRIVE ROTATION
29 TEETH FOR REVERSE DRIVE ROTATION
350 (5.7) ENG - V8 - 4.000 Bore (MERCRUISER 250, 255, 260, 260 5.7L, LX ALPHA, BRAVO, MAG
BRAVO EFI, 270, 280, 300, 320 EFI, 260 MIE, 260/5.7 MIE, 5.7 SKI, 350 MAG SKI, MAG ALPHA)
3pc Set
40400
Cam Gear
Crank Gear
2534
2535
BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT. FOR STD. DRIVE
ROTATION
58 TEETH FOR REVERSE DRIVE ROTATION
29 TEETH FOR REVERSE DRIVE ROTATION
351W (5.8) ENG - V8 - 4.000 Bore (MERCRUISER 233, 255)
40402
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
427 (7.0) ENG - V8 - 4.25 Bore (MERCRUISER 325)
3pc Set
250
BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT. HIGH
PERFORMANCE TYPE 3 PC SET; USE WITH FLAT LIFTER CAM;
USE W/STD. DRIVE ROTATION
302 (5.0) ENG - V8 - 4.000 Bore (MERCRUISER 215, 225, 225S, 888)
3pc Set
12
40400
283 (4.6) ENG - V8 - 3.875 Bore (MERCRUISER 190)
3pc Set
8
Description
262 (4.3) ENG - V6 - 4.000 Bore (MERCRUISER 175/4.3L, 185, 205, 205 4.3LX) (Continued)
3pc Set
6
Part No
40401
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT. FOR STD. DRIVE ROTATION
MERCURY MARINE (Continued)
Line
No.
13
Part Title
Part No
454 (7.4) ENG - V8 - 4 1/4 Bore (MERCRUISER 330, 7.4-454 BRAVO, MAG ALPHA, MAG BRAVO,
370-400-420-425-440 TRS, 450-525 SC, 330 MIE, 340 MIE, 7.4 MIE W/HURTH, 7.4 EFI MIE, 454 EFI
SKI, 350 MIE)
3pc Set
14
Description
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT. FOR STD. DRIVE ROTATION
EXCLUDES ROLLER CAM APPLICATIONS
40401
502 (8.2) ENG - V8 - 4.466 Bore (MERCRUISER 465, 500, 502 MAG BRAVO, 502 EFI, 600 SC & 8.2L
MIE)
3pc Set
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
40401
OMC
Engine
Year
Line
4 Cyl.
Engine
Year
6 Cyl.
153 (2.5)
1
250 (4.1)
181 (3.0)
2
V8
V6
4
5
8 Cyl.
3
300 (4.9)
Line
No.
Part Title
6
8
350 (5.7)
9
351W (5.8)
10
6
Part No
Description
2528S
ALUM. CAM GEAR & STEEL CRANK GEAR
2528S
ALUM. CAM GEAR & STEEL CRANK GEAR
3-359S
359
S334
S323
INCLUDES [359], [S334] & [S323]
54 LINKS
40 TEETH
20 TEETH
2528S
ALUM. CAM GEAR & STEEL CRANK GEAR
283 (4.6) ENG - V8 - 3 7/8 Bore (OMC 185)
3pc Set
40400
Cam Gear
Crank Gear
2534
2535
BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT. FOR STD. DRIVE
ROTATION
58 TEETH FOR REVERSE DRIVE ROTATION
29 TEETH FOR REVERSE DRIVE ROTATION
300 (4.9) ENG - 8 Cyl. - 3 3/4 Bore (OMC 170, 200)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
7
7
307 (5.0)
250 (4.1) ENG - 6 Cyl. - 3.875 Bore (OMC 165)
Gear Set
5
302 (5.0)
225 (3.7) ENG - V6 - 3.75 Bore (OMC 150, 155)
3pc Set
Chain
Cam Sprocket
Crank Sprocket
4
Line
181 (3.0) ENG - 4 Cyl. - 4.000 Bore (OMC 140)
Gear Set
3
Year
153 (2.5) ENG - 4 Cyl. - 3 7/8 Bore (OMC 100, 110, 120)
Gear Set
2
Engine
V8
283 (4.6)
225 (3.7)
1
Line
3-359S
359
S334
S323
INCLUDES [359], [S334] & [S323]
54 LINKS
40 TEETH
20 TEETH
302 (5.0) ENG - V8 - 4.000 Bore (OMC 170, 175, 190)
3pc Set
40402
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
251
OMC (Continued)
Line
No.
8
9
10
Part Title
Description
307 (5.0) ENG - V8 - 3 7/8 Bore (OMC 210, 215, 225, 230, 235, 245)
3pc Set
40400
Cam Gear
Crank Gear
2534
2535
BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT. STD.ROTATION
58 TEETH FOR REVERSE DRIVE ROTATION
29 TEETH FOR REVERSE DRIVE ROTATION
350 (5.7) ENG - V8 - 4.000 Bore (OMC 250, 260, 290)
3pc Set
40400
Cam Gear
Crank Gear
2534
2535
BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT. STD. ROTATION
58 TEETH FOR REVERSE DRIVE ROTATION
29 TEETH FOR REVERSE DRIVE ROTATION
351W (5.8) ENG - V8 - 4.000 Bore (OMC 235, 240)
3pc Set
252
Part No
40402
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
PREMIUM PERFORMANCE PARTS
WARRANTY DISCLAIMER
DUE TO INTENDED USAGE OF PERFORMANCE APPLICATIONS, THE PARTS IN THIS CATALOG ARE
SOLD WITHOUT ANY EXPRESS WARRANTY OR IMPLIED WARRANTY OR MERCHANTABILITY OR
FITNESS FOR THE INTENDED PURPOSE. INSTALLATION OF PARTS INTENDED FOR “OFF
HIGHWAY” USE. INSTALLATION OF THESE PARTS COULD AFFECT THE VEHICLE MANUFACTURER
WARRANTY COVERAGE.
The Melling engine Parts warranty does not consider low or no oil pressure grounds for
extensive engine repairs nor complete replacement of damaged engines. This consideration is
based on the fact that all vehicles have as standard equipment, either warning lights or
gauges, which is to warn the operator of low oil pressure, low oil level or no oil pressure prior
to the occurrence of the engine damage. If an operator chooses to ignore these gauges or
warning lights or if the gauges or warning lights are not in operating condition, this constitutes
negligence on the operators part. Therefore Melling Engine Parts cannot be responsible for
the cost of these extensive damages.
NOTE: it is illegal to use some Melling performance parts in vehicles that are operated on the
public streets and highways of California. Various other federal and state laws may limit the
use of these parts to “off highway” applications only. Check application fitment notes in the
Melling catalog and also current state and federal laws to be sure.
253
High Performance Automotive Listings
256
257
257
269
271
275
275
276
277
279
Buick
Cadillac
Chevrolet Cars & Trucks
Chrysler Products
Ford Products & Trucks
Hummer
Isuzu
Oldsmobile
Pontiac
Saab
ENGINE PARTS
254
TM
CYLINDER SLEEVES TM
A
COMPANY
Gear Drive
Best
Better
Good
Performance Timing Sets
Series
402
402
402
402
402
402
402
404
404
404
404
404
404
404
404
404
404
404
405
405
405
485
485
485
485
485
485
485
485
485
485
484
484
484
484
484
484
484
Melling
Part
Number
40201
40202
40203
40204
40205
40206
40217
40400
40401
40402
40403
40404
40405
40406
40407
40408
40409
40410
40500
40510
40520
48500T-9
48500W-9
48510T-9
48510W-9
48520T-9
48520W-9
48530T-9
48551T-9
48560T-9
48561T-9
48400
48410
48420
48430
48450
48400Q
48410Q
Application
Chevrolet S.B (Without Stock Roller Camshaft)
Chrysler S.B.
Chrysler B.B. (With 1 Bolt Camshaft)
Ford B.B
Chevrolet B.B.
Ford S.B.
Chrysler B.B. (With 3 Bolt Camshaft)
Chevrolet S.B. (Without Stock Roller Camshaft)
Chevrolet B.B.
Ford S.B.
Ford B.B.
Buick V6
Ford B.B.
Chrysler S.B.
Chrysler B.B. (With 1 Bolt Camshaft)
Pontiac B.B.
Oldsmobile B.B.
Ford B.B.
Chevrolet S.B. (Without Stock Roller Camshaft)
Chevrolet B.B.
Chevrolet S.B. (Without Stock Roller Camshaft)
Chevrolet S.B. (Without Stock Roller Camshaft)
Chevrolet S.B. (Without Stock Roller Camshaft)
Chevrolet S.B. (Without Stock Roller Camshaft)
Chevrolet S.B. (Without Stock Roller Camshaft)
Ford S.B.
Ford S.B.
Ford S.B.
Ford S.B.
Chevrolet LS
Chevrolet LS
Chevrolet S.B. (Without Stock Roller Camshaft)
Chevrolet S.B. (Without Stock Roller Camshaft)
Ford S.B.
Ford S.B.
Chevrolet S.B. (Without Stock Roller Camshaft)
Chevrolet S.B. (Without Stock Roller Camshaft)
Chevrolet S.B. (Without Stock Roller Camshaft)
*Single *Double
Cast Iron Steel
Steel
Roller Roller
Cam
Cam
Crank Single
Chain Chain Silent Sprocket Sprocket Sprocket Keyway
.200"
x
x
.200"
x
x
.220"
x
x
.220"
x
x
.220"
x
x
.200"
x
x
.220"
x
x
.250"
x
x
.250"
x
x
.250"
x
x
.250"
x
x
.250"
x
x
.250"
x
x
.250"
x
x
.250"
x
x
.250"
x
x
.250"
x
x
.250"
x
x
.335"
x
x
.335"
x
x
.375"
x
x
.250"
x
x
.250"
x
x
.250"
x
x
.250"
x
x
.250"
x
x
.250"
x
x
.250"
x
x
.250"
x
x
.250"
x
x
.250"
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
*Chain Roller Diameter "W" Suffix = Bronze Washer
"Q" Suffix = Quiet
"T" Suffix = Torrington Bearing
Check Mell-GEAR Catalog For More Detailed Application Information
255
PERFORMANCE - BUICK
Line
No.
1
Part Title
40404
40404
48500T-9
48500W-9
48500T-9
48500W-9
48560T-9
48561T-9
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
2004-2007 RANIER INCLUDES .250” SINGLE ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, PRESS FIT ROLLER THRUST BEARING
2004-2007 RANIER INCLUDES .250” DOUBLE SEAMLESS
ROLLER CHAIN, BILLET STEEL CAM SPROCKET, 9
KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, PRESS FIT ROLLER THRUST BEARING
5.7-L (350) ENG - 1977-79 - V8 - 4.000 Bore
3pc Set
48500T-9
48500W-9
256
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
5.3-C,M,P (325) ENG - 2004-09 - V8 - 3.78 Bore
3pc Set
7
DO NOT USE A DAMPER WITH THIS SET INCLUDES
.250” DOUBLE SEAMLESS ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
5.0-G,H,U (305) ENG - 1977-87 - V8 - 3.736 Bore
3pc Set
6
DO NOT USE DAMPER WITH THIS SET INCLUDES .250”
DOUBLE SEAMLESS ROLLER CHAIN, CAST IRON CAM
SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
4.4-J (267) ENG - 1981-82 - V8 - 3.50 Bore
3pc Set
5
1982-1984 DO NOT USE DAMPER WITH THIS SET
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
4.1-4 (252) OHV ENG - 1980-84 - V6 - 3.97 Bore
3pc Set
4
40404
3.8 (231) OHV ENG - 1977-87 - V6 - 3.78, 3.80 Bore
3pc Set
3
Description
3.0-E (181) ENG - 1982-85 - V6 - 3.800 Bore
3pc Set
2
Part No.
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
PERFORMANCE - BUICK (Continued)
Line
No.
8
Part Title
Part No.
Description
350 B,H,J,X ENG - 1972-81 - 8 Cyl. - 3.800 Bore
3pc Set
40210
INCLUDES ROLLER CHAIN, CAST IRON CAM
SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET
PERFORMANCE - CADILLAC
Line
No.
1
Part Title
Part No.
5.3-T (323) OHV ENG - 2002-05 - 8 Cyl. - 3.78 Bore
3pc Set
48560T-9
48561T-9
2
INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL
CAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER
THRUST BEARING
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
PRESS FIT ROLLER THRUST BEARING
5.7-S (346) OHV ENG - 2004-05 - 8 Cyl. - 3.90 Bore
3pc Set
48560T-9
48561T-9
3
Description
INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL
CAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER
THRUST BEARING
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
PRESS FIT ROLLER THRUST BEARING
6.0-N,U (364) OHV ENG - 2002-07 - 8 Cyl. - 4.00 Bore
3pc Set
48560T-9
48561T-9
2002-2006 ESCALADE INCLUDES .250” SINGLE ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, PRESS FIT ROLLER THRUST BEARING
2002-2006 ESCALADE INCLUDES .250” DOUBLE
SEAMLESS ROLLER CHAIN, BILLET STEEL CAM
SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH
+4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER THRUST
BEARING
PERFORMANCE - CHEVROLET CARS & TRUCKS
Line
No.
1
Part Title
Part No.
200 ENG - 1978-79 - V6 - 3.50 Bore
3pc Set
48500T-9
48500W-9
2
Description
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
229 ENG - 1980-1984 - V6 - 3.736 Bore
3pc Set
48500T-9
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
Continued on Next Page
257
PERFORMANCE - CHEVROLET CARS & TRUCKS (Continued)
Line
No.
2
Part Title
48500W-9
40201
40400
48500T-9
48500W-9
40520
EXCLUDES STOCK ROLLER CAM ENGINES GOOD;
INCLUDES .200” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
EXCLUDES STOCK ROLLER CAM ENGINES. BETTER;
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
EXCLUDING ROLLER CAM ENGINES, RACING
APPLICATIONS ONLY BETTER; NCLUDES .375” HY-VO
TEC SILENT CHAIN, CAST IRON CAM SPROCKET, 9
KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT.
262 ENG - 1985-04 - V6 - 4.0 Bore
3pc Set
40201
40400
48500T-9
48500T-9
48500W-9
Continued on Next Page
258
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
262 ENG - 1975-76 - 8 Cyl. - 3.67 Bore
3pc Set
4
Description
229 ENG - 1980-1984 - V6 - 3.736 Bore
3pc Set
3
Part No.
1985-1985 EXC STOCK ROLLER CAM ENGINES GOOD;
INCLUDES .200” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
EXC STOCK ROLLER CAM ENGS. INCLUDES TRUCKS
NON RACING APPLICATIONS ONLY BETTER; INCLUDES
.250” DOUBLE SEAMLESS ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
1985-1986 TRUCKS ONLY. BEST; INCLUDES .250”
DOUBLE SEAMLESS ROLLER CHAIN; BILLET STEEL
CAM SPROCKET; 9 KEYWAY STEEL CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT; PRESS FIT ROLLER
THRUST BEARING
1985-1993 CARS ONLY. BEST; INCLUDES .250” DOUBLE
SEAMLESS ROLLER CHAIN; BILLET STEEL CAM
SPROCKET; 9 KEYWAY STEEL CRANK SPROCKET WITH
+4°/-4° CAM ADJUSTMENT; PRESS FIT ROLLER THRUST
BEARING
1985-1986 TRUCKS ONLY BEST; INCLUDES .250”
DOUBLE SEAMLESS ROLLER CHAIN, BILLET STEEL
CAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT, BRONZE WASHER.
PERFORMANCE - CHEVROLET CARS & TRUCKS (Continued)
Line
No.
4
Part Title
Part No.
262 ENG - 1985-04 - V6 - 4.0 Bore
3pc Set
48500W-9
40520
5
48500T-9
48500W-9
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
267 ENG - 1979-82 - 8 Cyl. - 3.50 Bore
3pc Set
40201
40400
40500
48500T-9
48500W-9
40520
7
1985-1993 CARS ONLY BEST; INCLUDES .250” DOUBLE
SEAMLESS ROLLER CHAIN, BILLET STEEL CAM
SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH
+4°/-4° CAM ADJUSTMENT, BRONZE WASHER.
EXC. ROLLER CAM. TRUCK RACING APPLICATIONS
ONLY. BETTER; NCLUDES .375” HY-VO TEC SILENT
CHAIN, CAST IRON CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT.
265 ENG - 1955-57 - 8 Cyl. - 3.75 Bore
3pc Set
6
Description
EXCLUDING STOCK ROLLER CAM ENGINES GOOD;
INCLUDES .200” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
EXCLUDING STOCK ROLLER CAM ENGINES BETTER;
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
EXCLUDING STOCK ROLLER CAM ENGINES INCLUDES
.335” SINGLE SEAMLESS ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
EXCLUDING ROLLER CAM ENGINES; RACING
APPLICATIONS ONLY BETTER; NCLUDES .375” HY-VO
TEC SILENT CHAIN, CAST IRON CAM SPROCKET, 9
KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT.
283 ENG - 1957-67 - 8 Cyl. - 3 7/8 Bore
3pc Set
40201
1959-1967 EXCLUDING STOCK ROLLER CAM ENGINES;
TRUCK APPLICATIONS ONLY GOOD; INCLUDES .200”
DOUBLE ROLLER CHAIN, CAST IRON CAM SPROCKET,
3 KEYWAY CRANK SPROCKET WITH +2°/-2° CAM
ADJUSTMENT.
Continued on Next Page
259
PERFORMANCE - CHEVROLET CARS & TRUCKS (Continued)
Line
No.
7
Part Title
Part No.
283 ENG - 1957-67 - 8 Cyl. - 3 7/8 Bore
3pc Set
40201
40400
40400
40500
40500
48500T-9
48500T-9
48500W-9
48500W-9
40520
Continued on Next Page
260
Description
1967-1967 EXCLUDES STOCK ROLLER CAM ENGINES;
CAR APPLICATIONS ONLY GOOD; INCLUDES .200”
DOUBLE ROLLER CHAIN, CAST IRON CAM SPROCKET,
3 KEYWAY CRANK SPROCKET WITH +2°/-2° CAM
ADJUSTMENT.
1959-1967 EXCLUDING STOCK ROLLER CAM ENGINES.
TRUCKS ONLY. BETTER; INCLUDES .250” DOUBLE
SEAMLESS ROLLER CHAIN, CAST IRON CAM
SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
1967-1967 EXCLUDES STOCK ROLLER CAM ENGINES.
CAR APPLICATIONS ONLY. BETTER; INCLUDES .250”
DOUBLE SEAMLESS ROLLER CHAIN, CAST IRON CAM
SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
1959-1967 EXCLUDING STOCK ROLLER CAM ENGINES.
TRUCKS ONLY. INCLUDES .335” SINGLE SEAMLESS
ROLLER CHAIN, CAST IRON CAM SPROCKET, 3
KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAM
ADJUSTMENT.
1967-1967 EXCLUDES STOCK ROLLER CAM ENGINES.
CAR APPLICATIONS ONLY. INCLUDES .335” SINGLE
SEAMLESS ROLLER CHAIN, CAST IRON CAM
SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
1959-1967 TRUCKS ONLY. BEST; INCLUDES .250”
DOUBLE SEAMLESS ROLLER CHAIN; BILLET STEEL
CAM SPROCKET; 9 KEYWAY STEEL CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT; PRESS FIT ROLLER
THRUST BEARING
1967-1967 CAR APPLICATIONS ONLY. BEST; INCLUDES
.250” DOUBLE SEAMLESS ROLLER CHAIN; BILLET
STEEL CAM SPROCKET; 9 KEYWAY STEEL CRANK
SPROCKET WITH +4°/-4° CAM ADJUSTMENT; PRESS
FIT ROLLER THRUST BEARING
1959-1967 TRUCKS ONLY. BEST; INCLUDES .250”
DOUBLE SEAMLESS ROLLER CHAIN, BILLET STEEL
CAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT, BRONZE WASHER.
1967-1967 CAR APPLICATIONS ONLY BEST; INCLUDES
.250” DOUBLE SEAMLESS ROLLER CHAIN, BILLET
STEEL CAM SPROCKET, 9 KEYWAY STEEL CRANK
SPROCKET WITH +4°/-4° CAM ADJUSTMENT, BRONZE
WASHER.
1959-1967 RACING APPLICATIONS ONLY. EXCLUDING
STOCK ROLLER CAM ENGINES. TRUCKS ONLY.
BETTER; NCLUDES .375” HY-VO TEC SILENT CHAIN,
CAST IRON CAM SPROCKET, 9 KEYWAY STEEL CRANK
SPROCKET WITH +4°/-4° CAM ADJUSTMENT.
PERFORMANCE - CHEVROLET CARS & TRUCKS (Continued)
Line
No.
7
Part Title
40520
1967-1967 RACING APPLICATIONS ONLY. EXCLUDES
STOCK ROLLER CAM ENGINES. CAR APPLICATIONS
ONLY. BETTER; NCLUDES .375” HY-VO TEC SILENT
CHAIN, CAST IRON CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT.
4.8-A,C,V (294) ENG - 1999-13 - 8 Cyl. - 3.78 Bore
3pc Set
48560T-9
48560T-9
48561T-9
48561T-9
9
Description
283 ENG - 1957-67 - 8 Cyl. - 3 7/8 Bore
3pc Set
8
Part No.
1999-2006 INCLUDES .250” SINGLE ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
PRESS FIT ROLLER THRUST BEARING
2007-2007 EXPRESS 2500, SAVANA 2500 & SAVANA 3500
INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL
CAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER
THRUST BEARING
1999-2006 INCLUDES .250” DOUBLE SEAMLESS
ROLLER CHAIN, BILLET STEEL CAM SPROCKET, 9
KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, PRESS FIT ROLLER THRUST BEARING
2007-2007 EXPRESS 2500, SAVANA 2500 & SAVANA 3500
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
PRESS FIT ROLLER THRUST BEARING
302 ENG - 1967-69 - 8 Cyl. 4.00 Bore
3pc Set
40201
40400
40500
48500T-9
48500W-9
40520
CAMARO; EXCLUDES STOCK ROLLER CAM ENGINES
GOOD; INCLUDES .200” DOUBLE ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
EXCLUDES STOCK ROLLER CAM ENGINES BETTER;
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
EXCLUDES STOCK ROLLER CAM ENGINES INCLUDES
.335” SINGLE SEAMLESS ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
EXCLUDES STOCK ROLLER CAM ENGINES. RACING
APPLICATIONS ONLY BETTER; NCLUDES .375” HY-VO
TEC SILENT CHAIN, CAST IRON CAM SPROCKET, 9
KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT.
261
PERFORMANCE - CHEVROLET CARS & TRUCKS (Continued)
Line
No.
10
Part Title
Part No.
305 ENG - 1976-93 - 8 Cyl. - 3.74 Bore
3pc Set
40201
40400
40500
48500T-9
48500W-9
40520
11
1982-1987 EXCLUDING STOCK ROLLER CAM ENGINES
GOOD; INCLUDES .200” DOUBLE ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
1982-1987 EXCLUDING STOCK ROLLER CAM ENGINES
BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, CAST IRON CAM SPROCKET, 3 KEYWAY STEEL
CRANK SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
1982-1987 EXCLUDING STOCK ROLLER CAM ENGINES
INCLUDES .335” SINGLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
EXC. VIN E AND CA EMISSIONS. BEST; INCLUDES .250”
DOUBLE SEAMLESS ROLLER CHAIN; BILLET STEEL
CAM SPROCKET; 9 KEYWAY STEEL CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT; PRESS FIT ROLLER
THRUST BEARING
EXCLUDES VIN E AND CA EMISSIONS BEST; INCLUDES
.250” DOUBLE SEAMLESS ROLLER CHAIN, BILLET
STEEL CAM SPROCKET, 9 KEYWAY STEEL CRANK
SPROCKET WITH +4°/-4° CAM ADJUSTMENT, BRONZE
WASHER.
1982-1987 EXCLUDING STOCK ROLLER CAM ENGINES.
RACING APPLICATIONS ONLY. BETTER; NCLUDES .375”
HY-VO TEC SILENT CHAIN, CAST IRON CAM
SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH
+4°/-4° CAM ADJUSTMENT.
307 ENG - 1968-73 - 8 Cyl. - 3.88 Bore
3pc Set
40201
40400
40500
48500T-9
48500W-9
40520
262
Description
EXCLUDING STOCK ROLLER CAM ENGINES GOOD;
INCLUDES .200” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
EXCLUDING STOCK ROLLER CAM ENGINES BETTER;
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
EXCLUDING STOCK ROLLER CAM ENGINES INCLUDES
.335” SINGLE SEAMLESS ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
EXCLUDING STOCK ROLLER CAM ENGINES. RACING
APPLICATIONS ONLY. BETTER; NCLUDES .375” HY-VO
TEC SILENT CHAIN, CAST IRON CAM SPROCKET, 9
KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT.
PERFORMANCE - CHEVROLET CARS & TRUCKS (Continued)
Line
No.
12
Part Title
Part No.
5.3 (323,325) ENG - 1999-14 - 8 Cyl. - 3.78 Bore
3pc Set
48560T-9
48560T-9
48560T-9
48561T-9
48561T-9
48561T-9
13
Description
2005-2006 VIN M; TRAILBLAZER & ENVOY INCLUDES
.250” SINGLE ROLLER CHAIN, BILLET STEEL CAM
SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH
+4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER THRUST
BEARING
2005-2007 VIN B,T,Z; AVALANCHE, EXPRESS, SAVANA,
SIERRA, SILVERADO, SUBURBAN, TAHOE, YUKON,
YUKON XL & ESCALADE INCLUDES .250” SINGLE
ROLLER CHAIN, BILLET STEEL CAM SPROCKET, 9
KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, PRESS FIT ROLLER THRUST BEARING
1999-2004 FITS ALL INCLUDES .250” SINGLE ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, PRESS FIT ROLLER THRUST BEARING
1999-2004 FITS ALL INCLUDES .250” DOUBLE
SEAMLESS ROLLER CHAIN, BILLET STEEL CAM
SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH
+4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER THRUST
BEARING
2005-2006 2005-06 VIN M TRAILBLAZER & ENVOY
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
PRESS FIT ROLLER THRUST BEARING
2005-2007 VIN B,T,Z; AVALANCHE, EXPRESS, SAVANA,
SIERRA, SILVERADO, SUBURBAN, TAHOE, YUKON,
YUKON XL 1500 INCLUDES .250” DOUBLE SEAMLESS
ROLLER CHAIN, BILLET STEEL CAM SPROCKET, 9
KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, PRESS FIT ROLLER THRUST BEARING
327 ENG - 1962-69 - 8 Cyl. - 4.00 Bore
3pc Set
40201
40400
40500
48500T-9
48500W-9
EXCLUDING STOCK ROLLER CAM ENGINES GOOD;
INCLUDES .200” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
EXCLUDING STOCK ROLLER CAM ENGINES. BETTER;
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
EXCLUDING STOCK ROLLER CAM ENGINES. INCLUDES
.335” SINGLE SEAMLESS ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
Continued on Next Page
263
PERFORMANCE - CHEVROLET CARS & TRUCKS (Continued)
Line
No.
13
Part Title
40520
40201
40400
40500
48500T-9
48500W-9
40520
1969-1992 EXCLUDES STOCK ROLLER CAM ENGINES;
CAR APPLICATIONS ONLY GOOD; INCLUDES .200”
DOUBLE ROLLER CHAIN, CAST IRON CAM SPROCKET,
3 KEYWAY CRANK SPROCKET WITH +2°/-2° CAM
ADJUSTMENT.
1969-1992 EXCLUDING STOCK ROLLER CAM ENGINES
BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, CAST IRON CAM SPROCKET, 3 KEYWAY STEEL
CRANK SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
1969-1992 EXCLUDING STOCK ROLLER CAM ENGINES.
INCLUDES .335” SINGLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
1967-1988 BEST; INCLUDES .250” DOUBLE SEAMLESS
ROLLER CHAIN; BILLET STEEL CAM SPROCKET; 9
KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
1967-1988 BEST; INCLUDES .250” DOUBLE SEAMLESS
ROLLER CHAIN, BILLET STEEL CAM SPROCKET, 9
KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
1969-1992 EXCLUDING STOCK ROLLER CAM ENGINES.
RACING APPLICATIONS ONLY BETTER; NCLUDES .375”
HY-VO TEC SILENT CHAIN, CAST IRON CAM
SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH
+4°/-4° CAM ADJUSTMENT.
350 ENG - 1969-02 - 8 Cyl. - 4.00 Bore
3pc Set
40201
40400
40500
48500T-9
48500W-9
Continued on Next Page
264
EXCLUDING STOCK ROLLER CAM ENGINES. RACING
APPLICATIONS ONLY BETTER; NCLUDES .375” HY-VO
TEC SILENT CHAIN, CAST IRON CAM SPROCKET, 9
KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT.
350 ENG - 1967-97 - 8 Cyl. - 4.00 Bore
3pc Set
15
Description
327 ENG - 1962-69 - 8 Cyl. - 4.00 Bore
3pc Set
14
Part No.
1969-1992 EXCLUDES STOCK ROLLER CAM ENGINES
GOOD; INCLUDES .200” DOUBLE ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
1969-1992 EXCLUDING STOCK ROLLER CAM ENGINES
BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, CAST IRON CAM SPROCKET, 3 KEYWAY STEEL
CRANK SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
1969-1992 EXCLUDING STOCK ROLLER CAM ENGINES.
INCLUDES .335” SINGLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
1969-1996 BEST; INCLUDES .250” DOUBLE SEAMLESS
ROLLER CHAIN; BILLET STEEL CAM SPROCKET; 9
KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
1969-1996 BEST; INCLUDES .250” DOUBLE SEAMLESS
ROLLER CHAIN, BILLET STEEL CAM SPROCKET, 9
KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
PERFORMANCE - CHEVROLET CARS & TRUCKS (Continued)
Line
No.
15
Part Title
40520
48560T-9
48561T-9
48560T-9
48561T-9
2005-2005 INCLUDES .250” SINGLE ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
PRESS FIT ROLLER THRUST BEARING
2005-2005 INCLUDES .250” DOUBLE SEAMLESS
ROLLER CHAIN, BILLET STEEL CAM SPROCKET, 9
KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, PRESS FIT ROLLER THRUST BEARING
6.0 (364) ENG - 1999-14 - 8 Cyl. - 4.00 Bore
3pc Set
48560T-9
48560T-9
48561T-9
48561T-9
19
INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL
CAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER
THRUST BEARING
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
PRESS FIT ROLLER THRUST BEARING
6.0-U (364) OHV ENG - 2005-07 - 8 Cyl. - 4.00 Bore
3pc Set
18
1969-1992 EXCLUDING STOCK ROLLER CAM ENGINES.
RACING APPLICATIONS ONLY BETTER; NCLUDES .375”
HY-VO TEC SILENT CHAIN, CAST IRON CAM
SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH
+4°/-4° CAM ADJUSTMENT.
5.7-G,S (350) ENG - 1997-2005 - 8 Cyl. - 4.000 Bore
3pc Set
17
Description
350 ENG - 1969-02 - 8 Cyl. - 4.00 Bore
3pc Set
16
Part No.
1999-2006 INCLUDES .250” SINGLE ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
PRESS FIT ROLLER THRUST BEARING
2007-2007 EXPRESS 2500, EXPRESS 3500, SAVANA
2500, SAVANA 3500 INCLUDES .250” SINGLE ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, PRESS FIT ROLLER THRUST BEARING
1999-2006 INCLUDES .250” DOUBLE SEAMLESS
ROLLER CHAIN, BILLET STEEL CAM SPROCKET, 9
KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, PRESS FIT ROLLER THRUST BEARING
2007-2007 EXPRESS 2500, EXPRESS 3500, SAVANA
2500, SAVANA 3500 INCLUDES .250” DOUBLE
SEAMLESS ROLLER CHAIN, BILLET STEEL CAM
SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH
+4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER THRUST
BEARING
400 S.B. ENG - 1970-80 - 8 Cyl. - 4 1/8 Bore
3pc Set
40201
1970-1976 EXCLUDING STOCK ROLLER CAM ENGINES;
SMALL BLOCK CAR APPLICATIONS ONLY GOOD;
INCLUDES .200” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
Continued on Next Page
265
PERFORMANCE - CHEVROLET CARS & TRUCKS (Continued)
Line
No.
19
Part Title
Part No.
400 S.B. ENG - 1970-80 - 8 Cyl. - 4 1/8 Bore
3pc Set
40201
40400
40400
40500
40500
48500T-9
48500W-9
48500W-9
40520
40520
266
Description
1974-1980 EXCLUDING STOCK ROLLER CAM ENGINES;
SMALL BLOCK TRUCK APPLICATIONS ONLY GOOD;
INCLUDES .200” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
1970-1976 EXCLUDING STOCK ROLLER CAM ENGINES.
SMALL BLOCK CAR APPLICATIONS ONLY. BETTER;
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
1974-1980 EXCLUDING STOCK ROLLER CAM ENGINES.
SMALL BLOCK TRUCK APPLICATIONS ONLY. BETTER;
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
1970-1976 EXCLUDING STOCK ROLLER CAM ENGINES.
SMALL BLOCK CAR APPLICATIONS ONLY INCLUDES
.335” SINGLE SEAMLESS ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
1974-1980 EXCLUDING STOCK ROLLER CAM ENGINES.
SMALL BLOCK TRUCK APPLICATIONS ONLY INCLUDES
.335” SINGLE SEAMLESS ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
1970-1976 SMALL BLOCK CAR APPLICATIONS ONLY
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
1970-1976 SMALL BLOCK CAR APPLICATIONS ONLY
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
1974-1980 SMALL BLOCK TRUCK APPLICATIONS ONLY
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
1970-1976 EXCLUDING STOCK ROLLER CAM ENGINES.
SMALL BLOCK CAR RACING APPLICATIONS ONLY
BETTER; NCLUDES .375” HY-VO TEC SILENT CHAIN,
CAST IRON CAM SPROCKET, 9 KEYWAY STEEL CRANK
SPROCKET WITH +4°/-4° CAM ADJUSTMENT.
1974-1980 EXCLUDING STOCK ROLLER CAM ENGINES.
SMALL BLOCK TRUCK RACING APPLICATIONS ONLY
BETTER; NCLUDES .375” HY-VO TEC SILENT CHAIN,
CAST IRON CAM SPROCKET, 9 KEYWAY STEEL CRANK
SPROCKET WITH +4°/-4° CAM ADJUSTMENT.
PERFORMANCE - CHEVROLET CARS & TRUCKS (Continued)
Line
No.
20
Part Title
Part No.
396 ENG - 1965-70 - 8 Cyl. - 4.09 Bore
3pc Set
40205
40401
40510
48510T-9
48510W-9
21
INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
CAR AND TRUCK APPLICATIONS. INCLUDES .250”
DOUBLE SEAMLESS ROLLER CHAIN, CAST IRON CAM
SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
INCLUDES SEAMLESS SINGLE SOLID ROLLER CHAIN
(.335" ROLLER), CAST IRON CAM SPROCKET &
MULTIPLE KEYWAY CRANK SPROCKET EXC. STOCK
ROLLER CAM ENGINES. FOR CAR AND TRUCK
APPLICATIONS INCLUDES .335” SINGLE SEAMLESS
ROLLER CHAIN, CAST IRON CAM SPROCKET, 3
KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAM
ADJUSTMENT.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
PRESS FIT ROLLER THRUST BEARING.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
BRONZE WASHER.
400 (402) ENG - 1970-72 - 8 Cyl. - 4.13 Bore
3pc Set
40205
40401
40510
48510T-9
48510W-9
22
Description
FOR CAR AND TRUCK APPLICATIONS INCLUDES .220”
DOUBLE ROLLER CHAIN, CAST IRON CAM SPROCKET,
3 KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAM
ADJUSTMENT.
FOR CAR AND TRUCK APPLICATIONS INCLUDES .250”
DOUBLE SEAMLESS ROLLER CHAIN, CAST IRON CAM
SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
FOR CAR AND TRUCK APPLICATIONS INCLUDES .335”
SINGLE SEAMLESS ROLLER CHAIN, CAST IRON CAM
SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
PRESS FIT ROLLER THRUST BEARING.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
BRONZE WASHER.
427 ENG - 1966-69 - 8 Cyl. - 4.250 Bore
3pc Set
40205
40401
CAR APPLICATIONS ONLY INCLUDES .220” DOUBLE
ROLLER CHAIN, CAST IRON CAM SPROCKET, 3
KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAM
ADJUSTMENT.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
Continued on Next Page
267
PERFORMANCE - CHEVROLET CARS & TRUCKS (Continued)
Line
No.
22
Part Title
Part No.
427 ENG - 1966-69 - 8 Cyl. - 4.250 Bore
3pc Set
40510
48510T-9
48510W-9
23
40205
40401
40510
48510T-9
48510W-9
TRUCK APPLICATIONS ONLY INCLUDES .220” DOUBLE
ROLLER CHAIN, CAST IRON CAM SPROCKET, 3
KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAM
ADJUSTMENT.
TRUCKS ONLY. INCLUDES .250” DOUBLE SEAMLESS
ROLLER CHAIN, CAST IRON CAM SPROCKET, 3
KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAM
ADJUSTMENT.
INCLUDES SEAMLESS SINGLE SOLID ROLLER CHAIN
(.335" ROLLER), CAST IRON CAM SPROCKET, MULTIPLE
KEYWAY CRANK SPROCKET EXC. STOCK ROLLER CAM
ENGINES. INCLUDES .335” SINGLE SEAMLESS ROLLER
CHAIN, CAST IRON CAM SPROCKET, 3 KEYWAY STEEL
CRANK SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
PRESS FIT ROLLER THRUST BEARING.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
BRONZE WASHER.
454 ENG - 1970-76 - 8 Cyl. - 4.250 Bore
3pc Set
40205
40401
40510
Continued on Next Page
268
INCLUDES SEAMLESS SINGLE SOLID ROLLER CHAIN
(.335" ROLLER), CAST IRON CAM SPROCKET, MULTIPLE
KEYWAY CRANK SPROCKET EXC. STOCK ROLLER CAM
ENGINES. INCLUDES .335” SINGLE SEAMLESS ROLLER
CHAIN, CAST IRON CAM SPROCKET, 3 KEYWAY STEEL
CRANK SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
CAR APPLICATIONS ONLY INCLUDES .250” DOUBLE
SEAMLESS ROLLER CHAIN, BILLET STEEL CAM
SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH
+4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER THRUST
BEARING.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
BRONZE WASHER.
427 ENG - 1980-90 - 8 Cyl. - 4.250 Bore
3pc Set
24
Description
CAR APPLICATIONS ONLY INCLUDES .220” DOUBLE
ROLLER CHAIN, CAST IRON CAM SPROCKET, 3
KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAM
ADJUSTMENT.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
INCLUDES SEAMLESS SINGLE SOLID ROLLER CHAIN
(.335" ROLLER), CAST IRON CAM SPROCKET, MULTIPLE
KEYWAY CRANK SPROCKET EXC. STOCK ROLLER CAM
ENGINES. INCLUDES .335” SINGLE SEAMLESS ROLLER
CHAIN, CAST IRON CAM SPROCKET, 3 KEYWAY STEEL
CRANK SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
PERFORMANCE - CHEVROLET CARS & TRUCKS (Continued)
Line
No.
24
Part Title
Part No.
454 ENG - 1970-76 - 8 Cyl. - 4.250 Bore
3pc Set
48510T-9
48510W-9
25
Description
CAR APPLICATIONS ONLY INCLUDES .250” DOUBLE
SEAMLESS ROLLER CHAIN, BILLET STEEL CAM
SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH
+4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER THRUST
BEARING.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
BRONZE WASHER.
454 ENG - 1970-97 - 8 Cyl. - 4.250 Bore
3pc Set
40205
40401
40510
48510T-9
48510W-9
1970-1994 INCLUDES .220” DOUBLE ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
1970-1994 INCLUDES .250” DOUBLE SEAMLESS
ROLLER CHAIN, CAST IRON CAM SPROCKET, 3
KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAM
ADJUSTMENT.
1970-1994 EXC. STOCK ROLLER CAM ENGINES.
INCLUDES .335” SINGLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
TRUCK APPLICATIONS ONLY INCLUDES .250” DOUBLE
SEAMLESS ROLLER CHAIN, BILLET STEEL CAM
SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH
+4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER THRUST
BEARING.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
BRONZE WASHER.
PERFORMANCE - CHRYSLER PRODUCTS
Line
No.
1
Part Title
Part No.
4.5 (273) ENG - 1965-69 - V8 - 3.625 Bore
3pc Set
40202
40406
2
INCLUDES .200” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
5.2 (318) OHV ENG - 1975-02 - V8 - 3.910 Bore
3pc Set
40202
40406
3
Description
INCLUDES .200” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
5.6 (340) ENG - 1968-73 - V8 - 4.04 Bore
3pc Set
40202
INCLUDES .200” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
Continued on Next Page
269
PERFORMANCE - CHRYSLER PRODUCTS (Continued)
Line
No.
3
Part Title
40406
40202
40406
40203
40407
40203
40407
40203
40407
40203
40407
INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON
SINGLE BOLT CAM SPROCKET, 3 KEYWAY STEEL
CRANK SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
7.0 (426) WEDGE ENG - 1963-65 - 8 Cyl. - 4.25 Bore
3pc Set
40203
40217
40407
270
INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON
SINGLE BOLT CAM SPROCKET, 3 KEYWAY STEEL
CRANK SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
6.8 (413) ENG - 1959-65 - 8 Cyl. - 4.1876 Bore
3pc Set
9
INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON
SINGLE BOLT CAM SPROCKET, 3 KEYWAY STEEL
CRANK SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
6.6 (400) OHV ENG - 1975-78 - V8 - 4.34 Bore
3pc Set
8
INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON
SINGLE BOLT CAM SPROCKET, 3 KEYWAY STEEL
CRANK SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
6.3 (383) ENG - 1959-71 - V8 - 4.250 Bore
3pc Set
7
INCLUDES .200” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
5.9 (361) ENG - 1961-64 - V8 - 4.125 Bore
3pc Set
6
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
5.9 (360) OHV ENG - 1970-03 - V8 - 4.00 Bore
3pc Set
5
Description
5.6 (340) ENG - 1968-73 - V8 - 4.04 Bore
3pc Set
4
Part No.
INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON
SINGLE BOLT CAM SPROCKET, 3 KEYWAY STEEL
CRANK SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON 3
BOLT CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
PERFORMANCE - CHRYSLER PRODUCTS (Continued)
Line
No.
10
Part Title
Description
7.0 (426) HEMI ENG - 1966-71 - 8 Cyl. - 4.250 Bore
3pc Set
11
Part No.
40217
INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON 3
BOLT CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
7.2 (440) OHV ENG - 1966-78 - V8 - 4.320 Bore
3pc Set
40203
40217
40407
SINGLE BOLT CAM INCLUDES .220” DOUBLE ROLLER
CHAIN, CAST IRON SINGLE BOLT CAM SPROCKET, 3
KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAM
ADJUSTMENT.
3 BOLT CAM INCLUDES .220” DOUBLE ROLLER CHAIN,
CAST IRON 3 BOLT CAM SPROCKET, 3 KEYWAY STEEL
CRANK SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
SINGLE BOLT CAM INCLUDES .250” DOUBLE
SEAMLESS ROLLER CHAIN, CAST IRON CAM
SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
PERFORMANCE - FORD PRODUCTS & TRUCKS
Line
No.
1
Part Title
48551T-9
40206
40402
INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
289 ENG - 1963-68 - 8 Cyl. - 4.000 Bore
3pc Set
40206
40402
48520T-9
48520W-9
4
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN;
BILLET STEEL CAM SPROCKET; 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT;
PRESS FIT ROLLER THRUST BEARING; W/ 2PC FUEL
PUMP ECCENTRIC
260 ENG - 1962-65 - 8 Cyl. - 3.800 Bore
3pc Set
3
Description
255 ENG - 1980-82 - 8 Cyl. - 3.680 Bore
3pc Set
2
Part No.
INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
LATE 1965 USE 1/4" THRUST PLATE INCLUDES .250”
DOUBLE SEAMLESS ROLLER CHAIN, BILLET STEEL
CAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER
THRUST BEARING.
LATE 1965 USE 1/4" THRUST PLATE INCLUDES .250”
DOUBLE SEAMLESS ROLLER CHAIN, BILLET STEEL
CAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT, BRONZE WASHER.
302 ENG - 1968-2001 - 8 Cyl. - 4.000 Bore
3pc Set
40206
1968-1994 INCLUDES .220” DOUBLE ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
Continued on Next Page
271
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)
Line
No.
4
Part Title
Part No.
302 ENG - 1968-2001 - 8 Cyl. - 4.000 Bore
3pc Set
40402
48520T-9
48520W-9
48551T-9
48551T-9
5
40206
40402
48551T-9
INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
YOU MUST USE MF126 (3.356"L) THRUST PLATE
RATHER THAN MF125 OR STOCK (3.882"L) PLATE; NOT
FOR ROLLER CAMS INCLUDES .250” DOUBLE
SEAMLESS ROLLER CHAIN, CAST IRON CAM
SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
1984-1987 4BBL ENG. ONLY INCLUDES .250” DOUBLE
SEAMLESS ROLLER CHAIN; BILLET STEEL CAM
SPROCKET; 9 KEYWAY STEEL CRANK SPROCKET WITH
+4°/-4° CAM ADJUSTMENT; PRESS FIT ROLLER THRUST
BEARING; W/ 2PC FUEL PUMP ECCENTRIC
351W ENG - 1969-85 - 8 Cyl. - 4.000 Bore
3pc Set
Continued on Next Page
272
YOU MUST USE [MF126] (3.356"L) THRUST PLATE
RATHER THAN [MF125] OR STOCK (3.882"L) PLATE.
NOT FOR ROLLER CAMS INCLUDES .250” DOUBLE
SEAMLESS ROLLER CHAIN, CAST IRON CAM
SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
1968-1972 CAR AND TRUCK APPLICATIONS. CAR
APPLICATIONS USE 1/4" THRUST PLATE. INCLUDES
.250” DOUBLE SEAMLESS ROLLER CHAIN, BILLET
STEEL CAM SPROCKET, 9 KEYWAY STEEL CRANK
SPROCKET WITH +4°/-4° CAM ADJUSTMENT, PRESS
FIT ROLLER THRUST BEARING.
1968-1972 CAR APPLICATIONS USE 1/4" THRUST
PLATE. INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
1972-1995 1989-94 WITH ROLLER TYPE CHAIN, 1994-95
WITH SILENT TYPE CHAIN. 80-88 H/O CAR
APPLICATIONS ONLY. INCLUDES .250” DOUBLE
SEAMLESS ROLLER CHAIN; BILLET STEEL CAM
SPROCKET; 9 KEYWAY STEEL CRANK SPROCKET WITH
+4°/-4° CAM ADJUSTMENT; PRESS FIT ROLLER THRUST
BEARING; W/ 2PC FUEL PUMP ECCENTRIC
1972-2001 1989-90 WITH ROLLER TYPE CHAIN, 1994-01
WITH SILENT TYPE CHAIN. TRUCK APPLICATIONS
ONLY. INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING;
W/ 2PC FUEL PUMP ECCENTRIC
351W ENG - 1984-97 - 8 Cyl. - 4.00 Bore
3pc Set
6
Description
40206
TRUCK APPLICATIONS INCLUDES .220” DOUBLE
ROLLER CHAIN, CAST IRON CAM SPROCKET, 3
KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAM
ADJUSTMENT.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)
Line
No.
6
Part Title
40402
40206
40402
48520T-9
48520W-9
48551T-9
40405
NOT FOR USE WITH ROLLER CAMS INCLUDES .250”
DOUBLE SEAMLESS ROLLER CHAIN; CAST IRON CAM
SPROCKET; 3 KEYWAY STEEL CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
351M ENG - 1975-81 - 8 Cyl. - 4.000 Bore
3pc Set
10
INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
YOU MUST USE THE MF126 3.356" THRUST PLATE
RATHER THAN MF125 OR STOCK 3.882" THRUST
PLATE; NOT FOR ROLLER CAMS INCLUDES .250”
DOUBLE SEAMLESS ROLLER CHAIN, CAST IRON CAM
SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
1969-1972 EARLY 1972 USE STANDARD 1/4" THRUST
PLATE INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, PRESS FIT ROLLER THRUST BEARING.
1969-1972 EARLY 1972 USE STANDARD 1/4" THRUST
PLATE INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
1987-1989 VIN CODE G; W/ROLLER TYPE CHAIN
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN;
BILLET STEEL CAM SPROCKET; 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT;
PRESS FIT ROLLER THRUST BEARING; W/ 2PC FUEL
PUMP ECCENTRIC
351C ENG - 1970-74 - 8 Cyl. - 4.000 Bore
3pc Set
9
YOU MUST USE MF126 (3.356"L) THRUST PLATE
RATHER THAN MF125 OR STOCK (3.882"L) PLATE; NOT
FOR ROLLER CAMS INCLUDES .250” DOUBLE
SEAMLESS ROLLER CHAIN, CAST IRON CAM
SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
351W ENG - 1969-91 - 8 Cyl. - 4.000 Bore
3pc Set
8
Description
351W ENG - 1969-85 - 8 Cyl. - 4.000 Bore
3pc Set
7
Part No.
40405
NOT FOR USE WITH ROLLER CAMS INCLUDES .250”
DOUBLE SEAMLESS ROLLER CHAIN; CAST IRON CAM
SPROCKET; 3 KEYWAY STEEL CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
352 ENG - 1958-67 - 8 Cyl. - 4.000 Bore
3pc Set
40204
40204
1958-1966 CAR APPLICATIONS ONLY INCLUDES .220”
DOUBLE ROLLER CHAIN, CAST IRON CAM SPROCKET,
3 KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAM
ADJUSTMENT.
1965-1967 TRUCK APPLICATIONS ONLY INCLUDES .220”
DOUBLE ROLLER CHAIN, CAST IRON CAM SPROCKET,
3 KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAM
ADJUSTMENT.
Continued on Next Page
273
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)
Line
No.
10
Part Title
Part No.
352 ENG - 1958-67 - 8 Cyl. - 4.000 Bore
3pc Set
40410
40410
11
40204
40410
40204
40410
40405
40204
40410
40204
40410
INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
428 ENG - 1966-70 - 8 Cyl. - 4.130 Bore
3pc Set
40204
40410
274
1963-1963 INCLUDES .220” DOUBLE ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
1963-1963 INCLUDES .250” DOUBLE SEAMLESS
ROLLER CHAIN, CAST IRON CAM SPROCKET, 3
KEYWAY STEEL CRANK SPROCKET WITH +2°/-2° CAM
ADJUSTMENT.
427 ENG - 1963-68 - 8 Cyl. - 4.233 Bore
3pc Set
16
NOT FOR USE WITH ROLLER CAMS INCLUDES .250”
DOUBLE SEAMLESS ROLLER CHAIN; CAST IRON CAM
SPROCKET; 3 KEYWAY STEEL CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
406 ENG - 1962-63 - 8 Cyl. - 4.130 Bore
3pc Set
15
INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
400 ENG - 1971-82 - 8 Cyl. - 4.000 Bore
3pc Set
14
INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
390 ENG - 1961-76 - 8 Cyl. - 4.050 Bore
3pc Set
13
1958-1966 CAR APPLICATIONS ONLY INCLUDES .250”
DOUBLE SEAMLESS ROLLER CHAIN, CAST IRON CAM
SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
1965-1967 TRUCK APPLICATIONS ONLY INCLUDES .250”
DOUBLE SEAMLESS ROLLER CHAIN, CAST IRON CAM
SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET WITH
+2°/-2° CAM ADJUSTMENT.
360 ENG - 1968-76 - 8 Cyl. - 4.050 Bore
3pc Set
12
Description
INCLUDES .220” DOUBLE ROLLER CHAIN, CAST IRON
CAM SPROCKET, 3 KEYWAY STEEL CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)
Line
No.
17
Part Title
Part No.
429 ENG- 1968-73 - 8 Cyl. - 4.360 Bore
3pc Set
40403
48530T-9
18
Description
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
1972-1973 INCLUDES .250” DOUBLE SEAMLESS
ROLLER CHAIN, BILLET STEEL CAM SPROCKET, 9
KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, PRESS FIT ROLLER THRUST BEARING.
460 ENG - 1972-97 - 8 Cyl. - 4.360 Bore
3pc Set
40403
48530T-9
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
1972-1978 INCLUDES .250” DOUBLE SEAMLESS
ROLLER CHAIN, BILLET STEEL CAM SPROCKET, 9
KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, PRESS FIT ROLLER THRUST BEARING.
PERFORMANCE - HUMMER
Line
No.
1
Part Title
Part No.
5.3-L,P (325) OHV ENG - 2008-10 - 8 Cyl. - 3.78 Bore
3pc Set
48560T-9
48561T-9
2
Description
INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL
CAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER
THRUST BEARING
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
PRESS FIT ROLLER THRUST BEARING
6.0-U (364) OHV ENG - 2003-07 - 8 Cyl. - 4.00 Bore
3pc Set
48560T-9
48561T-9
INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL
CAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER
THRUST BEARING
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
PRESS FIT ROLLER THRUST BEARING
PERFORMANCE - ISUZU
Line
No.
1
Part Title
Part No.
Description
5.3-M,P (323) OHV ENG - (2003-06) - 8 Cyl. - 96.0 mm Bore
3pc Set
48560T-9
48561T-9
INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL
CAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER
THRUST BEARING
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
PRESS FIT ROLLER THRUST BEARING
Continued on Next Page
275
PERFORMANCE - OLDSMOBILE
Line
No.
1
Part Title
40409
48500T-9
48500W-9
48500T-9
48500W-9
48500T-9
48500W-9
40409
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
40409
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
455 ENG - 1968-76 - 8 Cyl. - 4.13 Bore
3pc Set
276
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
425 ENG - 1965-67 - 8 Cyl. - 4.125 Bore
3pc Set
8
40409
403 ENG - 1977-79 - 8 Cyl. - 4.350 Bore
3pc Set
7
1977-1979 BEST; INCLUDES .250” DOUBLE SEAMLESS
ROLLER CHAIN; BILLET STEEL CAM SPROCKET; 9
KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
1977-1979 BEST; INCLUDES .250” DOUBLE SEAMLESS
ROLLER CHAIN, BILLET STEEL CAM SPROCKET, 9
KEYWAY STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
400 ENG - 1965-69 - 8 Cyl. - 4.000 Bore
3pc Set
6
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
350 ENG - 1968-80 - 8 Cyl. - 4.057 Bore
3pc Set
5
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
305 ENG - 1977-88 - 8 Cyl. - 3.736 Bore
3pc Set
4
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
267 ENG - 1981-82 - 8 Cyl. - 3.500 Bore
3pc Set
3
Description
260 ENG - 1975-82 - 8 Cyl. - 3.500 Bore
3pc Set
2
Part No.
40409
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
PERFORMANCE - PONTIAC
Line
No.
1
Part Title
Part No.
3.8-K (229) ENG - 1980-81 - 6 Cyl. - 3.736 Bore
3pc Set
48500T-9
48500W-9
2
48500T-9
48500W-9
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
4.4-J (267) ENG - 1981-82 - 8 Cyl. - 3.50 Bore
3pc Set
48500T-9
48500W-9
4
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
4.3-Z (262) ENG - 1985 - 6 Cyl. - 4.00 Bore
3pc Set
3
Description
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
5.0 (305) ENG - 1977-87 - 8 Cyl. - 3.736 Bore
3pc Set
40201
40400
40500
48500T-9
48500W-9
40520
1982-1987 EXCLUDING STOCK ROLLER CAM ENGINES
GOOD; INCLUDES .200” DOUBLE ROLLER CHAIN, CAST
IRON CAM SPROCKET, 3 KEYWAY CRANK SPROCKET
WITH +2°/-2° CAM ADJUSTMENT.
1982-1987 EXCLUDING STOCK ROLLER CAM ENGINES
BETTER; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, CAST IRON CAM SPROCKET, 3 KEYWAY STEEL
CRANK SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
1982-1987 EXCLUDING STOCK ROLLER CAM ENGINES
INCLUDES .335” SINGLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
1982-1987 EXCLUDING STOCK ROLLER CAM ENGINES.
RACING APPLICATIONS ONLY. BETTER; NCLUDES .375”
HY-VO TEC SILENT CHAIN, CAST IRON CAM
SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET WITH
+4°/-4° CAM ADJUSTMENT.
277
PERFORMANCE - PONTIAC (Continued)
Line
No.
5
Part Title
Part No.
5.0 (307) ENG - 1971-72 - 8 Cyl. - 3 7/8 Bore
3pc Set
48500T-9
48500W-9
6
40408
40408
48500T-9
48500W-9
48560T-9
48561T-9
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL
CAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER
THRUST BEARING
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
PRESS FIT ROLLER THRUST BEARING
5.7 (350) OHV ENG - 2004 - 8 Cyl - 3.90 Bore
3pc Set
48560T-9
48561T-9
278
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
5.7-G (350) OHV ENG - 1998-02 - 8 Cyl. - 3.90 Bore
3pc Set
11
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
5.7-L (350) ENG - 1977-79 - 8 Cyl. - 3.875 Bore
3pc Set
10
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
350-P ENG - 1977 - 8 Cyl. - 3.875 Bore
3pc Set
9
40408
350 ENG - 1968-76 - 8 Cyl. - 3.875 Bore
3pc Set
8
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN; BILLET STEEL CAM SPROCKET; 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT; PRESS FIT ROLLER THRUST BEARING
BEST; INCLUDES .250” DOUBLE SEAMLESS ROLLER
CHAIN, BILLET STEEL CAM SPROCKET, 9 KEYWAY
STEEL CRANK SPROCKET WITH +4°/-4° CAM
ADJUSTMENT, BRONZE WASHER.
326 ENG - 1963-73 - 8 Cyl. - 3.719 Bore
3pc Set
7
Description
INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL
CAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER
THRUST BEARING
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
PRESS FIT ROLLER THRUST BEARING
PERFORMANCE - PONTIAC (Continued)
Line
No.
12
Part Title
Part No.
6.0-U (364) OHV ENG - 2005-06 - 8 Cyl. - 4.00 Bore
3pc Set
48560T-9
48561T-9
13
40408
40408
40408
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
428 ENG - 1967-69 - 8 Cyl. - 4.120 Bore
3pc Set
17
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
421 ENG - 1963-66 - 8 Cyl. - 4.093 Bore
3pc Set
16
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
400 ENG - 1967-69 - 8 Cyl. - 4.120 Bore
3pc Set
15
INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL
CAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER
THRUST BEARING
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
PRESS FIT ROLLER THRUST BEARING
389 ENG - 1959-66 - 8 Cyl. - 4.062 Bore
3pc Set
14
Description
40408
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
455 ENG - 1970-76 - 8 Cyl. - 4.151 Bore
3pc Set
40408
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
CAST IRON CAM SPROCKET, 3 KEYWAY STEEL CRANK
SPROCKET WITH +2°/-2° CAM ADJUSTMENT.
PERFORMANCE - SAAB
Line
No.
1
Part Title
Part No.
5.3-M (325) OHV ENG - 2005-09 - 8 Cyl. - 3.78 Bore
3pc Set
48560T-9
48561T-9
2
Description
INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL
CAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER
THRUST BEARING
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
PRESS FIT ROLLER THRUST BEARING
6.0-H (364) OHV ENG - 2008-09 - 8 Cyl. - 4.00 Bore
3pc Set
48560T-9
48561T-9
INCLUDES .250” SINGLE ROLLER CHAIN, BILLET STEEL
CAM SPROCKET, 9 KEYWAY STEEL CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT, PRESS FIT ROLLER
THRUST BEARING
INCLUDES .250” DOUBLE SEAMLESS ROLLER CHAIN,
BILLET STEEL CAM SPROCKET, 9 KEYWAY STEEL
CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT,
PRESS FIT ROLLER THRUST BEARING
279
NOTES
280
NUMERICAL LISTING
ABBREVIATIONS USED TO
INDICATE CAR AND TRUCK MANUFACTURERS
ACUR:
ACURA
ISUZ:
ALFA:
ALFA ROMEO
JAGU:
JAGUAR
ALLT:
ALLIS CHALMERS LIFT TRUCK
JEEP:
JEEP
ALTR:
ALLIS CHALMERS TRACTOR
JOHN:
JOHN DEERE TRACTOR
AMC:
AMERICAN MOTORS
KAIS:
KAISER
AMC:
PERFORMANCE - AMERICAN MOTORS & JEEP
KIA:
KIA
AUDI:
AUDI
LEXU:
LEXUS
AUS:
AUSTIN
MAZD:
MAZDA
BMW:
BMW
MENZ:
MERCEDES BENZ
BUIC:
BUICK
MERC:
MERCURY (INC. LINCOLN)
BUIC:
PERFORMANCE - BUICK
MERC:
MERCURY MARINE
CADL:
CADILLAC
MGGB:
MG
CADL:
PERFORMANCE - CADILLAC
MINN:
MINNEAPOLIS-MOLINE
CASE:
CASE TRACTOR
MITS:
MITSUBISHI
CATP:
CATERPILLAR
NISS:
NISSAN/DATSUN
CHEV:
CHEVROLET
NISS:
NISSAN INDUSTRIAL
CHEV:
PERFORMANCE - CHEVROLET CARS & TRUCKS
OLDS:
OLDSMOBILE
CHYL:
CHRYSLER
OLDS:
PERFORMANCE - OLDSMOBILE
CHYL:
PERFORMANCE - CHRYSLER PRODUCTS
OLTR:
OLIVER TRACTOR
CHYL:
CHRYSLER MARINE
OMC:
OMC
CHYU:
CHRYLSER-INDUSTRIAL
OPEL:
OPEL
CONT:
CONTINENTAL
PERK:
PERKINS
CPGT:
MINI COOPER
PEUG:
PEUGEOT
CUMM:
CUMMINS
PLYM:
PLYMOUTH
DAEW:
DAEWOO
PONT:
PONTIAC
DAIH:
DAIHATSU
PONT:
PERFORMANCE - PONTIAC
DESO:
DESOTO
PORS:
PORSCHE
DETD:
DETROIT DIESEL
RENL:
RENAULT
DODG:
DODGE
REO:
REO
DODT:
DODGE TRUCK
ROVE:
ROVER
EAGL:
EAGLE
SAAB:
SAAB
FIAT:
FIAT
SAAB:
PERFORMANCE - SAAB
FORD:
FORD
SATU:
SATURN
FORD:
PERFORMANCE - FORD PRODUCTS & TRUCKS
SCI:
SCION
FORD:
FORD MARINE
STUD:
STUDEBAKER
FOTR:
FORD TRUCK
SUBU:
SUBARU
FOTT:
FORD TRACTOR
SUZI:
SUZUKI
FOTU:
FORD INDUSTRIAL
TOY:
SPORT COMPACT PERFORMANCE - TOYOTA
GMC:
GMC/CHEVY TRUCKS
HENR:
HENRY-J
TOYO:
HERC:
HERCULES
TRIU:
TRIUMPH
HOND:
HONDA
VOLK:
VOLKSWAGEN
HUM:
HUMMER
VOLV:
VOLVO
HUMMER:
PERFORMANCE - HUMMER
WAUK:
WAUKESHA
HYUN:
HYUNDAI
WHIT:
WHITE TRUCK
IHC:
I.H.C. TRUCK
WHTR:
WHITE PDQ TRUCKS
IHCT:
I.H.C. TRACTOR & POWER UNITS
WISC:
WISCONSIN
INFI:
INFINITI
YUGO:
YUGO
ISUZ:
ISUZU
Part No.
Application
PERFORMANCE - ISUZU
CARS & TRUCKS
TOYOTA
Part No.
CHAIN TENSIONER
Application
CHAIN TENSIONER (Cont.)
5497B
MERC, FORD - 281 (1993-05)
BT01
TOYO - (1971-89)
BD6005
NISS, SUZI - (2005-14)
BT07
NISS - (1969-89)
281
Part No.
Application
Part No.
CHAIN TENSIONER (Cont.)
NUMERICAL LISTING
Application
CHAIN TENSIONER (Cont.)
BT08
NISS - (1970-84)
BT16
TOYO - (1975-90)
BT17
GMC, ISUZ, OPEL, MAZD - 111 (1971-84)
FOTR, MERC, FORD - 281, 330, 415 (1991-14)
BT18
BT430
TOYO - (1971-79)
DODT, JEEP, MITS - 226 (2002-13)
BT46
BT431
FOTR, MAZD - 110 (1971-78)
DODT, JEEP, MITS - 226 (2002-13)
BT47
BT432
FOTR, MAZD - 122 (1976-85)
BT49
BT433
DODT, JEEP, MITS - 226 (2002-13)
DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,
BT452
FOTR, MERC, FORD, MAZD - 121, 122, 138, 140
156 (1974-89)
BT61
GMC, ISUZ - 119 (1982-87)
BT63
GMC, ISUZ, OPEL - 111, 119 (1976-87)
BT68
TOYO - (1971-82)
BT100
TOYO - (1981-95)
BT103
NISS - (1966-70)
BT127
MERC, FORD - 140, 153 (1984-94)
BT143
BUIC, OLDS, PONT - 151 (1985-91)
BT157
FOTR, MERC, MAZD - 177, 245 (1986-00)
BT167
AMC, DODT, EAGL, JEEP - 150, 153 (1983-02)
BT168
MAZD - (1989-94)
BT176
NISS - (1989-97)
BT179
NISS - (1989-90)
BT188
BT429
FOTR, MERC, FORD - 245, 281, 330, 415
(1991-14)
(2001-15)
BT506
DODG, CHYL - 167 (1998-10)
BT507
DODG, CHYL - 167 (1998-10)
BT5115
BUIC, CHEV, GMC, ISUZ, OLDS, CADL, PONT 121, 122, 134 (1983-03)
BT5383
CHEV, GMC, OLDS, SATU, PONT, SAAB - 122,
134, 145 (2000-14)
BT5412
SATU - 116 (1991-02)
BT5436
NISS, INFI - (1995-01)
BT5437
NISS, INFI - (1995-01)
BT5441
NISS, INFI - (1995-01)
BT5442
NISS, INFI - (1995-01)
BUIC, CHEV, OLDS, PONT - 138 (1987-95)
BT5452
GMC, OLDS - 262 (1992-14)
BT199
TOYO - (1991-95)
BT5481
CHEV, GMC, OLDS, SATU, PONT, SAAB - 122,
BT220
BUIC, CHEV, OLDS, PONT - 151 (1982-92)
BT229
NISS - (1991-99)
BT5489
DODG, DODT, JEEP, CHYL - 345, 370 (2003-14)
BT230
NISS - (1991-99)
BT5490
CHEV, GMC, HUM, CADL, SAAB - 294, 325, 364,
BT235
NISS - (1991-04)
BT236
NISS - (1991-04)
BT5511
GMC, HUM, ISUZ - 169, 178, 211, 223 (2004-12)
BT245
NISS, INFI - (1991-02)
BT5512
BUIC, GMC, HUM, ISUZ, OLDS, SAAB - 169, 178,
BT298
DODG, DODT, JEEP, PLYM, CHYL - 135, 148, 153
134, 145 (2000-14)
376 (1999-14)
211, 223, 256 (2002-12)
(1981-10)
FOTR, MAZD - 138, 183 (2001-12)
BT313
BT5513
BUIC, OLDS, CADL - 244, 281 (1993-11)
FOTR, FORD, MAZD - 121, 122, 138 (2001-15)
BT314
BT5514
BUIC, OLDS, CADL - 244, 281 (1993-11)
BT5535
BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT -
BT323
FOTR, MERC, FORD - 232, 238, 256 (1982-08)
BT327
SATU - 116 (1991-02)
BT345
FOTR, MAZD - 245 (1990-00)
BT355
BUIC, CHEV, OLDS, PONT - 146 (1996-02)
BT356
BUIC, CHEV, OLDS, PONT - 146 (1996-02)
BT358
TOYO - (1994-13)
BT359
TOYO - (1991-04)
BT402
FOTR, MERC, FORD - 281, 330, 415 (1991-14)
BT403
FOTR, MERC, FORD - 281, 330, 415 (1991-14)
BT404
MERC, FORD - 281, 330, 354,355 (1993-14)
BT405
MERC, FORD - 281, 330, 354,355 (1993-14)
BT406
MERC, FORD - 155, 183 (1995-12)
BT408A
MERC, FORD - 155, 183 (1995-12)
BT411
FOTR, MERC - 330, 415 (1997-14)
BT412
FOTR, MERC - 330, 415 (1997-14)
BT417
BT418
170, 182, 217, 220 (2004-15)
BT5536
BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT 170, 182, 217, 220 (2004-15)
BT5537
BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT 170, 182, 217, 220 (2004-15)
BT5549
MERC, FORD, MAZD - 183 (1996-12)
BT5550
MERC, FORD, MAZD - 183 (1996-12)
BT5555
FOTR, FORD, MAZD - 121, 122 (2004-15)
BT5557
HYUN, KIA - (2006-13)
BT5559
HYUN, KIA - (2006-13)
BT5560
HYUN, KIA - (2006-13)
BT5563
HYUN, KIA - (2006-13)
BT5565
SCI, TOYO - (2000-14)
BT5566
SCI, TOYO - (2000-14)
MERC, FORD - 330 (1999-12)
BT5568
GMC - 262 (2002-14)
DODT, JEEP, MITS - 226, 285 (1998-13)
BT5569
ACUR, HOND - (2002-15)
BT419
DODT, JEEP, MITS, CHYL - 285 (1998-10)
BT5573
ACUR, HOND - (2002-15)
BT420
DODT, JEEP, MITS, CHYL - 285 (1998-10)
BT5574
ACUR, HOND - (2002-15)
BT426
DODG, CHYL - 167 (1998-10)
BT6000
NISS, SUZI - (2005-14)
BT426A
DODG, CHYL - 167 (1998-10)
BT6001
NISS, SUZI - (2005-14)
BT427
DODG, CHYL - 167 (1998-10)
BT6002
NISS, SUZI - (2005-14)
BT428
DODT - 238 (1987-03)
MSB-02
DODG, CHYL - 167 (1998-10)
282
NUMERICAL LISTING
Part No.
Application
Part No.
Application
ADAPTOR PLATE
AP275
MERC, FORD, BUIC - 281, 350 (1977-11)
BELT TENSIONER
BD32
DODG, MITS, PLYM - (1977-88)
BD33
DODG, EAGL, MITS, PLYM, HYUN - 86, 90
(1979-02)
BD38
DODG, EAGL, MITS, PLYM - 107 (1977-94)
BELT GUIDE
BG53
DODG, PLYM - (1971-77)
BG94
CHEV, ISUZ, PONT - 110 (1981-86)
BG95
MERC, FORD - 116, 121, 122, 98 (1981-04)
BG119
NISS - (1983-86)
BELT TENSIONER
BT10
MERC, OPEL, FORD - 122 (1968-74)
BT21
HOND - (1975-84)
BT56
DODG, PLYM - (1971-77)
BT66
CHEV, TOYO - 98 (1980-97)
BT75
NISS - (1982-88)
BT76
NISS - (1982-89)
BT89
AUDI, VOLK - (1977-06)
BT91
DODG, DODT, PLYM, CHYL - 135 (1981-94)
BT92
MERC, FORD - 116, 98 (1981-96)
BT93
HOND - (1979-83)
BT94
DODG, PLYM, CHYL - 153 (1986-95)
BT96
TOYO - (1982-88)
BT104
TOYO - (1983-86)
BT105
DODG, DODT, MITS, PLYM - 122, 144 (1983-05)
BT106
DODG, DODT, EAGL, MITS, PLYM - 122, 144
(1983-05)
BT111
TOYO - (1983-01)
BT113
HOND - (1983-89)
BT115
HOND - (1983-86)
BT116
HOND - (1981-87)
BT117
MAZD - (1984-87)
BT118
NISS - (1983-86)
BT120
NISS, INFI - (1984-04)
BT124
TOYO - (1984-86)
BT129
FORD, MAZD - 152 (1992-01)
BT134
CHEV, ISUZ - 92 (1985-89)
BT135
TOYO - (1985-91)
BT139
CHEV - 61, 79 (1985-94)
BT140
SUBU - (1985-94)
BT141
SUBU - (1985-94)
BT148
AMC, DODG, DODT, PLYM, PORS, AUDI, VOLK -
BELT TENSIONER (Cont.)
BT197
(1989-05)
BT198
ACUR - (1986-90)
BT202
HOND - (1988-91)
BT203
ACUR, HOND - (1990-02)
BT205
TOYO - (1986-92)
BT206
TOYO - (1987-94)
BT207
TOYO - (1987-94)
BT209
TOYO - (1988-95)
BT213
MERC, FORD, KIA, MAZD - 98 (1988-05)
BT225
EAGL, MITS, PLYM, HYUN - 122 (1989-01)
BT260
NISS, INFI - (1990-97)
BT263
ISUZ - (1985-95)
BT271
DODG, MITS, CHYL - 152, 181 (1991-12)
BT301
TOYO - (1987-01)
BT308
CHEV, OLDS, PONT - 207 (1991-97)
BT324
FORD, MAZD - 152 (1992-01)
BT326
ACUR - (1986-89)
BT342
CHEV, TOYO - 110, 98 (1989-97)
BT350
MERC, FORD - 116 (1986-96)
BT357
DODG, EAGL, PLYM, CHYL - 197, 215 (1993-10)
BT5120
DODG, MITS, CHYL - 152, 181 (1995-05)
BT5121
DODG, MITS, CHYL - 152, 181 (1995-12)
BT5262
ACUR, HOND - (1990-01)
BT5280
SUBU - (1992-97)
BT5390
MERC, FORD - 121 (1995-04)
BT5406
MERC, FORD - 121, 122 (1997-04)
BT5450
HOND - (1993-09)
BT5451
ACUR, HOND - (2001-05)
BT5525
LEXU, TOYO - (1990-10)
BT6003
LEXU, TOYO - (1990-10)
CHAIN GUIDE
BD30
DODG, EAGL, MITS, PLYM - 107 (1983-94)
BT161
DODG, DODT, MITS, PLYM, HYUN - 122, 144
DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,
156 (1974-89)
BD31
DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,
156 (1974-89)
CHAIN DAMPER ADAPTER BRACKET
BD417-BRKT
CHEV, GMC, HUM, CADL, PONT - 294, 323, 325,
346, 350, 364 (1997-13)
BD417-DBRKT CHEV, GMC, HUM, CADL, PONT - 294, 323, 325,
346, 350, 364 (1997-13)
CHAIN GUIDE
BG48
DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,
156 (1976-89)
105, 121 (1973-02)
BT160
DODT, EAGL, MITS, PLYM, HYUN - 122, 144
BG51
DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,
156 (1976-89)
(1983-05)
BG55
NISS - (1980-86)
BT162
HOND - (1988-95)
BG64
DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,
BT164
MERC, FORD, KIA, MAZD - 79, 98 (1986-97)
156 (1976-89)
FORD, KIA, MAZD - 133 (1987-02)
BG77
MAZD - (1979-84)
BT192
DODG, DODT, PLYM, CHYL - 135, 153 (1981-95)
BG80
MAZD - (1981-85)
BT194
MAZD - (1971-76)
BT195
DODG, EAGL, MITS, PLYM, HYUN - 122 (1989-01) BG85
DODG, DODT, MITS, PLYM, CHYL - 181 (1987-05) BG86
BT196
EAGL, MITS, PLYM - 122, 144 (1985-05)
BG87
MAZD - (1971-76)
BT166
MAZD - (1976-78)
283
Part No.
Application
Part No.
CHAIN GUIDE (Cont.)
BG88
MAZD - (1971-76)
BG127
NISS - (1980-89)
BG128
NISS - (1983-89)
BG169
MAZD - (1989-94)
BG170
MAZD - (1989-94)
BG171
MAZD - (1989-94)
BG172
MAZD - (1989-94)
BG173
MAZD - (1989-94)
BG177
NISS - (1989-97)
BG178
NISS - (1989-97)
BG180
NISS - (1989-90)
BG181
NISS - (1989-90)
BG187
FOTR, MERC - 177 (1986-92)
BG200
TOYO - (1991-95)
BG231
NISS - (1991-99)
BG232
NISS - (1991-99)
BG233
NISS - (1991-99)
BG234
NISS - (1991-99)
BG237
NISS - (1991-04)
BG238
NISS - (1991-04)
BG239
NISS - (1991-04)
BG240
NISS - (1991-04)
BG246
NISS, INFI - (1991-02)
BG247
NISS, INFI - (1991-02)
BG248
NISS, INFI - (1991-02)
BG261
FOTR, MAZD - 245 (1990-00)
BG297
DODG, DODT, JEEP, PLYM, CHYL - 135, 148, 153
(1981-10)
BG304
BUIC, CHEV, OLDS, PONT - 138 (1987-95)
BG305
BUIC, CHEV, OLDS, PONT - 138 (1987-95)
BG306
BUIC, CHEV, OLDS, PONT - 138 (1987-95)
BG307
BUIC, OLDS, PONT - 138 (1992-94)
BG309
BUIC, OLDS, CADL - 244, 281 (1993-11)
BG310
BUIC, OLDS, CADL - 244, 281 (1993-11)
BG315
MERC, FORD - 281 (1991-11)
BG316
MERC, FORD - 281 (1991-11)
BG319
FOTR, MERC, FORD - 281 (1991-13)
BG320
FOTR, MERC, FORD - 281 (1991-13)
BG328
SATU - 116 (1991-02)
BG329
SATU - 116 (1991-02)
BG330
SATU - 116 (1991-02)
BG331
SATU - 116 (1991-02)
BG332
SATU - 116 (1991-02)
BG333
FOTR, MERC, FORD - 281 (1991-13)
BG334
FOTR, MERC, FORD - 281 (1991-13)
BG337
AMC, DODT, EAGL, JEEP - 150, 153, 242
(1983-06)
BG360
TOYO - (1994-04)
BG365
BUIC, CHEV, OLDS, PONT - 146 (1996-02)
BG366
BUIC, CHEV, OLDS, PONT - 146 (1996-02)
BG367
BUIC, CHEV, OLDS, PONT - 146 (1996-02)
BG368
BUIC, CHEV, OLDS, PONT - 146 (1996-02)
BG391
MERC, FORD - 281 (1993-05)
BG391G
MERC, FORD - 281 (1993-05)
BG392G
MERC, FORD - 281 (1993-05)
284
NUMERICAL LISTING
Application
CHAIN GUIDE (Cont.)
BG409
BG410
BG413
BG414
BG415
BG416
BG422
BG423
BG423A
BG424
BG425
BG434
BG435
BG449
MERC, FORD - 155, 183 (1995-12)
MERC, FORD - 155, 183 (1995-12)
FOTR, MERC - 330, 415 (1997-14)
FOTR, MERC - 330, 415 (1997-14)
MERC, FORD - 330 (1999-12)
MERC, FORD - 330 (1999-12)
DODT, JEEP, MITS, CHYL - 285 (1998-10)
DODG, CHYL - 167 (1998-10)
DODG, CHYL - 167 (1998-10)
DODG, CHYL - 167 (1998-10)
DODG, CHYL - 167 (1998-10)
DODT, JEEP, MITS - 226 (2002-13)
DODT, JEEP, MITS - 226 (2002-13)
FOTR, MERC, FORD, MAZD - 121, 122, 138, 140
BG5251
BG5253
BG5254
BG5255
BG5256
BG5257
BG5375
(2001-15)
INFI - (1990-96)
INFI - (1990-96)
INFI - (1990-96)
INFI - (1990-96)
INFI - (1990-96)
INFI - (1990-96)
BUIC, CHEV, GMC, OLDS, SATU, PONT, SAAB -
BG5381
122, 134, 145 (2000-14)
BUIC, CHEV, GMC, OLDS, SATU, PONT, SAAB -
BG5382
122, 134, 145 (2000-14)
CHEV, GMC, OLDS, SATU, PONT, SAAB - 122,
BG5384
134, 145 (2000-14)
CHEV, GMC, OLDS, SATU, PONT, SAAB - 122,
BG5385
134, 145 (2000-14)
CHEV, GMC, OLDS, SATU, PONT, SAAB - 122,
BG5386
134, 145 (2000-14)
BUIC, CHEV, GMC, OLDS, SATU, PONT, SAAB -
BG5413
BG5414
BG5415
BG5416
BG5434
BG5435
BG5438
BG5439
BG5440
BG5504
122, 134, 145 (2000-14)
SATU - 116 (1991-02)
SATU - 116 (1991-02)
SATU - 116 (1991-02)
SATU - 116 (1991-02)
TOYO - (1991-04)
TOYO - (1991-04)
NISS, INFI - (1995-01)
NISS, INFI - (1995-01)
NISS, INFI - (1995-01)
BUIC, GMC, HUM, ISUZ, OLDS, SAAB - 169, 178,
BG5506
211, 223, 256 (2002-12)
BUIC, GMC, HUM, ISUZ, OLDS, SAAB - 169, 211,
BG5510
BG5515
BG5530
256 (2002-09)
GMC, HUM, ISUZ, SAAB - 178, 223, 256 (2002-12)
FOTR, MAZD - 138 (2001-13)
BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT -
BG5531
170, 182, 217, 220 (2004-15)
BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT -
BG5532
170, 182, 217, 220 (2004-15)
BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT -
BG5533
170, 182, 217, 220 (2004-15)
BUIC, CHEV, GMC, MERC, SATU, SUZI, CADL,
PONT - 170, 182, 183, 217, 220 (1996-15)
NUMERICAL LISTING
Part No.
Application
Part No.
CHAIN GUIDE (Cont.)
BG5534
Application
DAMPER (Cont.)
BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT -
BD344
BUIC, CHEV, OLDS, PONT - 231 (1990-09)
170, 182, 217, 220 (2004-15)
BD361
TOYO - (1994-04)
BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT -
BD362
TOYO - (1994-04)
170, 182, 217, 220 (2004-15)
TOYO - (1994-04)
BG5551
BD363
MERC, FORD, MAZD - 183 (1996-12)
TOYO - (1994-04)
BG5552
BD364
MERC, FORD, MAZD - 183 (1996-12)
BG5553
BD393
MERC, FORD - 281 (1993-05)
MERC, FORD, MAZD - 183 (1996-13)
BG5556
BD394
MERC, FORD - 281 (1993-05)
FOTR, FORD, MAZD - 121, 122 (2004-15)
BG5558
BD417
CHEV, GMC, ISUZ, CADL, PONT, SAAB - 294,
HYUN, KIA - (2006-13)
BG5561
HYUN, KIA - (2006-13)
BG5564
BD421
DODT, JEEP, MITS, CHYL - 285 (1998-10)
SCI, TOYO - (2000-14)
BG5570
BUIC, CHEV, OLDS, PONT - 189, 207, 213, 214
ACUR, HOND - (2002-15)
BD600
BG5571
ACUR, HOND - (2002-15)
BG5572
ACUR, HOND - (2002-15)
BG6003
NISS, SUZI - (2005-14)
BG6004
NISS, SUZI - (2005-14)
BG6006
BUIC, GMC, HUM, ISUZ, OLDS, SAAB - 169, 178,
BG5548
BT214
MERC, FORD, KIA, MAZD - 98 (1988-05)
BT215
FORD, MAZD - 133 (1987-93)
BT216
MAZD - (1988-98)
BT227
DODG, MITS, CHYL - 152, 181 (1989-12)
BT293
MAZD - (1988-98)
BT325
FORD, MAZD - 152 (1992-01)
BT5222
MAZD - (1990-95)
BT5223
MAZD - (1990-95)
BT5243
NISS, INFI - (1990-97)
BT5244
NISS, INFI - (1990-97)
BT5259
LEXU, TOYO - (1990-10)
BT5268
ACUR - (1991-98)
BT5281
SUBU - (1992-97)
BT5283
NISS, INFI - (1990-97)
BT5292
MAZD - (1990-95)
181, 196, 198, 225, 231, 252, 350 (1962-89)
BT5299
TOYO - (1992-99)
BUIC, CHEV, GMC, JEEP, OLDS, CADL, PONT -
BT5300
TOYO - (1992-99)
181, 196, 198, 225, 231, 252, 350 (1962-87)
BT5409
MERC, FORD - 121 (1995-04)
BUIC, CHEV, OLDS, PONT - 181, 204, 231
BT5410
MERC, FORD - 121 (1995-04)
(1984-05)
BT5444
KIA - (1995-02)
AMC, BUIC, CHEV, GMC, ISUZ, JEEP, OLDS,
BT5448
HOND - (1993-01)
CB100
ACUR, ALFA, AMC, BUIC, CHEV, OLDS, CADL,
GMC, HUM, ISUZ - 169, 178, 211, 223 (2004-12)
BD22
TOYO - (1968-82)
BD23
TOYO - (1971-89)
BD25
TOYO - (1975-90)
BD26
TOYO - (1975-90)
BD27
NISS - (1969-84)
BD34
GMC, ISUZ, OPEL - 111, 119 (1976-87)
BD37
GMC - 111 (1972-75)
BD40
FOTR, MAZD - 110, 122 (1972-84)
BD43
TOYO - (1971-79)
BD44
BUIC, CHEV, GMC, JEEP, OLDS, CADL, PONT -
BD58
BD59
IDLER
FORD, MAZD - 152 (1992-01)
DAMPER
BD45
(1993-10)
BT128
211, 223, 256 (2002-12)
BG6007
323, 325, 346, 364, 376 (1999-14)
CAM BUTTON
PONT - 173, 189, 207 (1980-95)
BD71
TOYO - (1981-84)
BD74
FOTR, MAZD - 110, 122 (1972-84)
BD81
MAZD - (1981-85)
BD83
CB200
FOTR, MERC, FORD - 232 (1982-04)
MAZD - (1971-76)
BD98
BUIC, OLDS, PONT - 204, 231 (1988-93)
NISS - (1981-83)
CB300
BD101
TOYO - (1981-90)
BD102
TOYO - (1981-95)
5496B
CHEV, OLDS, SATU, PONT - 122, 134, 145
BD102HD
TOYO - (1981-95)
BD131
BUIC, CHEV, OLDS, CADL, PONT - 173, 189
(1985-95)
BD132
TOYO - (1981-95)
BD295
BUIC, CHEV, OLDS, PONT - 204, 231 (1988-05)
BD311
PONT - 181, 196, 231, 252 (2003)
CAMSHAFT BOLT
(2000-11)
CAM THRUST PLATE SPACER
MG221
AMC, BUIC, CHEV, GMC, ISUZ, JEEP, OLDS,
PONT, STUD - 122, 134, 151, 153, 189, 194, 230,
250, 292 (1962-03)
BUIC, OLDS, CADL - 244, 281 (1993-11)
S802SP
FOTR, MERC, FORD - 281, 415 (1991-13)
BD312
BUIC, OLDS, CADL - 244, 281 (1993-11)
S803SP
MERC, FORD - 281, 330 (1993-05)
BD321
FOTR, MERC, FORD - 281 (1991-13)
BD322
FOTR, MERC, FORD - 281 (1991-13)
5467N
CHEV, OLDS, SATU, PONT - 122, 134, 145
BD336
BUIC, CHEV, OLDS, PONT - 189, 207 (1993-05)
OIL JET NOZZLE
(2000-14)
285
Part No.
Application
Part No.
TIMING BELT
NUMERICAL LISTING
Application
TIMING BELT (Cont.)
B-012
CHEV, OLDS, PONT - 140 (1971-77)
B-0126
TOYO - (1986-92)
B-013
DODG, MERC, PLYM, FORD - 122 (1971-80)
B-0127
AUDI, VOLK - (1983-92)
B-014
FOTR, MERC, FORD - 122, 140 (1974-97)
B-0128
DODG, EAGL, MITS, PLYM, HYUN - 90 (1985-03)
B-017
AMC, DODG, DODT, PLYM, PORS, AUDI, VOLK -
B-0129
ACUR - (1986-90)
105, 121 (1973-97)
B-0131
BMW - (1982-06)
B-032
VOLV - (1976-95)
B-0132
DODG, PLYM, CHYL - 153 (1986-95)
B-036
CHEV, TOYO, HOND - 98 (1975-97)
B-0133
VOLK - (1986-93)
B-037
CHEV - 85, 98 (1976-87)
B-0134
FORD, MAZD - 133 (1987-93)
B-039
CHEV - 98 (1976-87)
B-0135
SUBU - (1987-95)
B-041
HOND - (1975-84)
B-0136
TOYO - (1987-90)
B-043
AUDI, VOLK - (1977-92)
B-0137
NISS - (1987-89)
B-061
CHEV, PONT - 98 (1976-87)
B-0139
DODG, DODT, MITS, PLYM, CHYL, HYUN - 181
B-067
MERC, FORD - 116, 98 (1981-96)
B-070
CHEV, TOYO - 98 (1980-88)
B-0140
EAGL, RENL - 132 (1987-89)
B-071
DODG, DODT, PLYM, CHYL - 135 (1981-94)
B-0141
MERC, FORD, MAZD - 79, 98 (1986-97)
B-073
DODG, MITS, PLYM, HOND, HYUN - 86, 90
B-0142
HOND - (1988-91)
(1979-94)
B-0143
HOND - (1988-95)
B-074
TOYO - (1982-88)
B-0144
HOND - (1988-90)
B-075
GMC, ISUZ - (1981-87)
B-0145
HOND - (1988-95)
B-076
CHEV, ISUZ, PONT - 110 (1981-86)
B-0146
MAZD - (1988-98)
B-077
NISS - (1982-88)
B-0147
ISUZ, HOND - (1988-97)
B-078
NISS - (1982-89)
B-0148
PONT - 98 (1988-93)
B-081
BUIC, OLDS, PONT - 112, 122 (1982-91)
B-0150
SUBU - (1989-91)
B-086
NISS - (1981-83)
B-0151
SUBU - (1989-91)
B-087
TOYO - (1983-86)
B-0152
PORS - (1987-95)
B-088
MAZD - (1984-87)
B-0153
DODG, DODT, PLYM, CHYL - 135, 153 (1981-95)
B-089
DODG, DODT, MITS, PLYM - 122 (1983-91)
B-0154
TOYO - (1988-95)
B-090
DODG, DODT, EAGL, MITS, PLYM - 107, 122
B-0155
EAGL, MITS - 122 (1989-93)
(1983-94)
B-0157
LEXU, TOYO - (1988-91)
B-091
DODT, FOTR, MITS - 140 (1983-87)
B-0158
DODG, DODT, EAGL, MITS, PLYM - 107, 122
B-092
DODT, FOTR, MITS - 140 (1983-87)
B-093
DODG, MITS, PLYM - 107 (1983-90)
B-0160
HOND - (1983-89)
B-094
HOND - (1983-86)
B-0161
HOND - (1981-87)
B-095
CHEV, SUZI - 61, 79 (1985-97)
B-0162
CHEV, ISUZ - 92 (1985-89)
B-096
NISS - (1983-86)
B-0163
PONT - 121, 122 (1987-94)
B-097
NISS - (1983-86)
B-0164
GMC, SUZI - 98 (1989-00)
B-099
HOND - (1981-87)
B-0165
DODG, EAGL, MITS, PLYM, HYUN - (1989-95)
B-0100
ACUR, NISS - (1984-03)
B-0166
CHEV - 61 (1987-00)
B-0101
ACUR, TOYO - (1982-03)
B-0167
EAGL, MITS, PLYM, HYUN - 122 (1989-06)
B-0103
MERC, FORD, MAZD - 122 (1984-87)
B-0168
DODG, DODT, EAGL, MITS, PLYM, CHYL, HYUN
B-0104
MERC, NISS, INFI - 183 (1984-98)
B-0106
BMW - (1982-88)
B-0169
CHEV, ISUZ - 98 (1989-92)
B-0107
PORS - (1983-89)
B-0170
AUDI - (1987-92)
B-0108
PORS - (1983-89)
B-0171
SUZI - (1989-94)
B-0111
PEUG, RENL - (1984-90)
B-0172
SUBU - (1990-01)
B-0112
CHEV, TOYO - 98 (1985-91)
B-0173
VOLV - (1989-92)
B-0113
MAZD - (1984-87)
B-0174
VOLV - (1989-92)
B-0114
DODG, PLYM, CHYL - 153 (1986-95)
B-0176
CHEV, TOYO - 98 (1985-91)
B-0117
MAZD - (1984-87)
B-0177
CHEV, ISUZ - 98 (1990-93)
B-0118
CHEV, ISUZ - 92 (1985-89)
B-0178
DAIH - (1988-92)
B-0121
ISUZ - (1985-89)
B-0179
MERC, FORD, KIA, MAZD - 98 (1988-05)
B-0122
ISUZ - (1986-95)
B-0180
NISS, INFI - (1990-97)
B-0123
MAZD - (1986-94)
B-0181
DAIH - (1989-92)
B-0124
DODT, MITS, HYUN - 144 (1985-05)
B-0182
DAIH - (1990-92)
B-0125
TOYO - (1986-95)
B-0183
MAZD - (1990-95)
286
(1987-00)
(1983-94)
- 122, 143,148, 144, 148 (1989-12)
NUMERICAL LISTING
Part No.
Application
Part No.
TIMING BELT (Cont.)
Application
TIMING BELT (Cont.)
B-0184
ACUR, HOND - (1990-01)
B-0253
MITS - (1994-96)
B-0185
FORD, KIA, MAZD - 79 (1986-97)
B-0254
SUBU - (1990-01)
B-0186
ACUR, ISUZ, HOND - (1990-02)
B-0255
DODG, EAGL, PLYM, CHYL - 215 (1993-10)
B-0187
ISUZ, HOND - (1990-97)
B-0256
MITS - (1994)
B-0189
PEUG - (1989-91)
B-0257
LEXU, TOYO - (1994-06)
B-0190
LEXU - (1990-00)
B-0258
MERC, FORD - 121 (1995-04)
B-0191
DODG, EAGL, MITS, PLYM, HYUN - (1991-03)
B-0259
DODG, MITS, CHYL - 152, 181 (1989-05)
B-0192
CHEV, OLDS, PONT - 207 (1991-97)
B-0262
VOLK - (1993-02)
B-0193
ACUR - (1991-05)
B-0263
HOND - (1995-97)
B-0194
CHEV, MERC, FORD - 116, 61, 79 (1986-01)
B-0264
KIA - (1995)
B-0195
DODG, MITS - 181 (1991-99)
B-0265
DODG, JEEP, PLYM, CHYL - 148 (1995-10)
B-0198
VOLV - (1989-92)
B-0266
MAZD - (1995-98)
B-0199
TOYO - (1987-01)
B-0271
TOYO - (1995-04)
B-0200
LEXU, TOYO - (1992-93)
B-0272
CHEV, SUZI - 79 (1989-97)
B-0201
DODG, EAGL, MITS, PLYM - 112 (1992-02)
B-0273
CHEV, OLDS, PONT - 207 (1991-97)
B-0203
PONT - 98 (1988-93)
B-0276
FOTR, MAZD - 140, 153 (1983-01)
B-0204
EAGL, MITS, PLYM - 144 (1985-05)
B-0277
SUBU - (1996-99)
B-0205
CHEV, ISUZ - 110, 350 (1992-02)
B-0279
ACUR, HYUN - (1996-04)
B-0206
DODG, CHYL - 135 (1989-93)
B-0280
ACUR - (1996-04)
B-0208
TOYO - (1992-99)
B-0281
KIA - (1995-02)
B-0210
FOTR, FORD - 140 (1974-97)
B-0282
HYUN - (2001-11)
B-0211
ACUR - (1992-98)
B-0283
MERC, FORD - 121, 122 (1997-04)
B-0212
GMC, SUZI - 98 (1989-02)
B-0285
SATU, CADL - 181, 197 (1997-05)
B-0214
FORD, MAZD - 152 (1992-01)
B-0286
ACUR, HOND - (1997-08)
B-0215
LEXU, TOYO - (1992-05)
B-0287
MITS - (1995-12)
B-0216
HOND - (1992-96)
B-0288
MITS - (1992-02)
B-0217
VOLV - (1992-10)
B-0289
MITS - (1991-02)
B-0218
AUDI - (1992-98)
B-0291
VOLK - (1998-06)
B-0219
DODG, EAGL, CHYL - 215 (1993-10)
B-0294
FOTR, MERC, FORD - 121 (1995-04)
B-0220
ISUZ - (1992-95)
B-0295
DODG, CHYL - 197, 215 (1993-10)
B-0221
ACUR, ISUZ, HOND - (1992-97)
B-0296
VOLK - (1998-00)
B-0223
HOND - (1988-95)
B-0297
AUDI, VOLK - (1992-06)
B-0224
ACUR, HOND - (1988-00)
B-0298
LEXU, TOYO - (1990-10)
B-0226
HOND - (1993-01)
B-0299
SUBU - (1985-94)
B-0227
ACUR, HOND - (1992-00)
B-0300
SUBU - (1985-94)
B-0228
FORD, MAZD - 122 (1993-03)
B-0301
VOLK - (1996-06)
B-0229
DODT, MITS - 144 (1985-05)
B-0302
KIA - (1995-04)
B-0230
EAGL, MITS, PLYM - 144 (1993-05)
B-0303
ACUR, ISUZ, HOND - (1992-04)
B-0232
DODG, MITS, CHYL - 143,148, 148 (1989-05)
B-0304
SUBU - (1990-01)
B-0233
TOYO - (1990-94)
B-0305
ISUZ, DAEW - (1998-03)
B-0234
VOLV - (1985-95)
B-0306
AUDI, VOLK - (1997-06)
B-0235
CHEV, TOYO - 110 (1992-97)
B-0307
SUBU - (1999-12)
B-0236
CHEV, TOYO - 98 (1988-97)
B-0308
MAZD - (1999-01)
B-0237
TOYO - (1986-92)
B-0309
DAEW - (1999-02)
B-0239
ACUR, TOYO - (1988-08)
B-0310
CHEV, DAEW, PONT - 98 (1999-11)
B-0240
TOYO - (1988-95)
B-0311
VOLV - (1993-10)
B-0241
CHEV - 61 (1989-00)
B-0312
ACUR, HOND - (2001-05)
B-0244
ACUR, ISUZ, HOND - (1990-02)
B-0313
HYUN, KIA - (1999-06)
B-0245
DODG, PLYM, CHYL - 122 (1995-05)
B-0314
HYUN, KIA - (1999-06)
B-0246
DODG, EAGL, MITS, PLYM, CHYL - 122 (1993-99)
B-0315
HYUN, KIA - (1999-12)
B-0247
ACUR - (1994-01)
B-0318
KIA - (2001-05)
B-0248
FORD - 183, 192 (1989-95)
B-0320
MITS - (2003-12)
B-0249
MERC, NISS, INFI - 183, 201 (1985-04)
B-0323
HYUN, KIA - (2002-06)
B-0251
NISS, INFI - (1990-97)
B-0329
ACUR, SATU, HOND - (1998-14)
B-0252
VOLV - (1993-10)
B-0330
AUDI - (2002-06)
287
Part No.
Application
Part No.
TIMING BELT (Cont.)
NUMERICAL LISTING
Application
CAM SPROCKET (Cont.)
B-0331
VOLV - (1993-10)
S392
CHEV, GMC - 396, 402, 427, 454 (1965-00)
B-0332
MITS - (1993-12)
S394
CHEV, GMC, WHIT - 366, 396, 402, 427, 454
B-0333
VOLK - (2004-05)
B-0334
AUDI, VOLK - (2005-13)
S396
FOTR, FORD - 360, 390, 428 (1961-76)
BALANCE SHAFT SPROCKET
S398
BUIC - 400, 430, 455 (1967-76)
S402
DODG, DODT, PLYM, CHYL - 238, 317, 318, 340,
S567
DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,
156 (1976-89)
S642
DODG, DODT, JEEP, PLYM, CHYL - 135, 148, 153
(1981-10)
S853
CHEV, OLDS, SATU, PONT - 122, 134, 145
(2000-14)
S855
CHEV, OLDS, SATU, PONT - 122, 134, 145
(2000-14)
S875
FOTR, MERC, MAZD - 244, 245 (1997-11)
S939
ACUR, HOND - (2002-15)
CAM SPROCKET
2064
NISS - (1983-86)
S249
FOTR, MERC, FORD, FOTU - 215, 223, 239, 256,
272, 292, 312 (1964)
S255
CADL - 331, 365, 390 (1949-63)
S261
CHEV, GMC, STUD - 265, 283, 327, 348, 409
(1955-69)
S265
DODG, DODT, PLYM, CHYU - 218, 230, 251, 265
(1968)
S273
(2000)
360 (1958-03)
S404
CADL - 368, 425, 429, 472, 500 (1964-84)
S406
FOTR, MERC, FORD - 289, 302, 351 (1963-01)
S410
FOTR, MERC, FORD - 330, 352, 359, 360, 361,
389, 390, 391, 410, 427, 428 (1958-78)
S420
FOTR, MERC, FORD, FOTU - 351, 400, 429, 460
(1997)
S422
MERC, FORD - 97, 98 (1971-73)
S426
CHEV, OLDS, PONT - 140 (1971-77)
S430
FOTR, MERC, FORD - 255, 302, 351 (1968-01)
S432
DODT - 361, 413 (1960-77)
S436
MERC, FORD - 351, 400 (1969-79)
S438
FOTR - 370, 429, 460 (1973-98)
S446
FOTR, MERC, FORD - 122, 140 (1974-97)
S448
FOTR - 360, 390 (1968-76)
S450
FOTR, MAZD - 110 (1971-78)
S456
DODG, FOTR, MAZD - 110, 122 (1972-87)
S458
DODG, DODT, MITS, CHYL, MAZD - 122, 135
(1974-89)
DESO, DODG, PLYM, CHYU, CHYL - 270, 315,
S462
NISS - (1969-89)
317, 318, 325, 326, 331, 354, 392 (1989)
S284
S494
BUIC, OLDS, PONT - 265, 301 (1977-81)
MERC, FORD - 332, 352, 361, 390, 406 (1958-71)
S288
S500
GMC, ISUZ, OPEL - 111, 119 (1976-87)
BUIC, CHEV, GMC, OLDS, WHIT, PONT - 200,
S506
AMC, BUIC, CHEV, GMC, ISUZ, JEEP, OLDS,
229, 262, 265, 267, 283, 302, 305, 307, 327, 350,
400 (2002)
S308
PONT - 173, 189, 207 (1980-95)
S512
FOTR, MERC, FORD, FOTU - 144, 170, 200
AMC, JEEP - 290, 304, 343, 360, 390, 401
(1966-91)
(1983)
GMC - 379, 395 (1982-02)
S326
S524
FOTR, MERC, FORD - 221, 260, 289 (1962-69)
MAZD - (1979-85)
S328
S540
AMC - 196 (1958-65)
FOTR, MERC, FORD - 232 (1982-04)
S332
S542
BUIC - 364, 401, 425 (1957-66)
CADL - 252, 273 (1982-89)
S334
S546
BUIC, JEEP, OLDS, OMC, PONT - 198, 215, 225,
S558
BUIC, CHEV, GMC, OLDS, CADL, PONT - 121,
231, 300, 340, 350 (1980)
S340
122, 134 (1983-02)
DODG, DODT, PLYM, CHYL - 361, 426, 440
S560
CHEV, TOYO - 98 (1980-97)
(1959-78)
TOYO - (1981-83)
S344
S594
OLDS - 371, 394 (1957-64)
NISS - (1966-70)
S346
S598
GMC - 322 (1956-59)
TOYO - (1981-95)
S348
S600
BUIC, CHEV, OLDS, CADL, PONT - 260, 307,
S608
AMC, DODT, EAGL, JEEP - 150, 153 (1983-02)
330, 350, 403, 455 (1964-90)
S610
BUIC, CHEV, GMC, OLDS, CADL, PONT - 181,
S358
DODG, DODT, PLYM, CHYL - 273, 317, 318, 360
196, 231, 252 (1977-89)
(1958-03)
S612
FOTR, MERC, FORD - 302, 351 (1968-01)
S360
OLDS - 400, 425, 455 (1965-76)
S616
DODG, DODT, PLYM, CHYL - 135 (1981-94)
S366
DODG, DODT, PLYM, CHYU, CHYL - 361, 383,
S618
MERC, FORD - 140, 153 (1984-94)
400, 440 (1979)
S620
BUIC, CHEV, OLDS, CADL, PONT - 173, 189
S370
CADL - 390, 429 (1959-67)
S380
DESO, DODG, DODT, PLYM, CHYL - 361, 383,
S622
TOYO - (1985-91)
400, 413, 426, 440 (1958-79)
S626
CHEV - 92 (1985-89)
S388
AMC, JEEP, IHC - 199, 232, 258 (1964-90)
S634
GMC - 350 (1980-96)
S390
BUIC, CHEV, GMC, OLDS, PONT - 200, 229, 262,
S636
FOTR, MERC, FORD, MAZD - 182 (1986-08)
267, 283, 302, 305, 307, 327, 350, 400 (1957-02)
S638
MERC, FORD - 116 (1985-96)
288
(1985-95)
NUMERICAL LISTING
Part No.
Application
Part No.
CAM SPROCKET (Cont.)
S650
FOTR, MERC, MAZD - 177, 245 (1986-00)
S656
BMW - (1980-85)
S658
AUDI, VOLK - (1973-02)
S670
DODG, EAGL, MITS, PLYM, HYUN - 90 (1985-94)
S674
SUBU - (1985-94)
S676
VOLV - (1976-95)
S686
NISS - (1989-90)
S688
JEEP - 242 (1987-06)
S690
BUIC, CHEV, OLDS, PONT - 151 (1982-92)
S692
BUIC, CHEV, OLDS, PONT - 138 (1987-95)
S694
NISS - (1989-97)
S698
NISS - (1983-89)
S700
FOTR, MERC, FORD - 232, 238, 256 (1982-08)
S704
BMW - (1985-93)
S706
CADL - 250, 273, 300 (1987-95)
S710
GMC - 366, 427 (1968-98)
S712
DODT, JEEP - 238, 318, 360 (1959-03)
S714
DODG, PLYM, CHYL - 153, 182 (1986-95)
S716
BUIC, CHEV, OLDS, PONT - 231 (1988-05)
S718
BUIC, OLDS, PONT - 231 (1988-91)
S720
NISS - (1991-99)
S724
NISS, INFI - (1991-02)
S726
BUIC, OLDS, PONT - 204 (1989-93)
S732
BUIC, CHEV, GMC, OLDS, CADL, PONT - 262,
305, 350 (1976-02)
S734
BUIC, CHEV, OLDS, PONT - 138 (1987-95)
S736
MERC, FORD - 281 (1991-11)
S740
MERC, FORD - 281 (1991-11)
S742
CHEV, PONT - 350 (1992-97)
S754
TOYO - (1991-04)
S756
BUIC, CHEV, OLDS, PONT - 189, 207 (1993-05)
S760
MERC, FORD - 281 (1991-11)
S762
MERC, FORD - 281 (1991-11)
S764
FOTR, MERC, FORD - 281, 330, 415 (1991-14)
S766
FOTR, MERC, FORD - 281, 330, 415 (1991-14)
S768
OLDS, CADL - 244 (1993-11)
S770
OLDS, CADL - 244 (1993-11)
S774
BUIC, CHEV, GMC, ISUZ, OLDS, PONT - 134
(1992-03)
S776
GMC, ISUZ, OLDS - 262 (1985-02)
S778
NISS - (1991-04)
S780
OLDS, CADL - 244 (1993-11)
S784
GMC, CADL - 350 (1996-02)
S786
SATU - 116 (1991-02)
S788
DODG, EAGL, PLYM, CHYL - 201, 230, 230,231,
231 (1990-10)
Application
CAM SPROCKET (Cont.)
S818
S822
S824
S830
S832
S834
S836
S840
S842
S846
S848
FOTR, MERC, FORD - 302 (1968-01)
JEEP - 242 (1987-06)
DODT, JEEP, MITS - 226 (2002-13)
GMC - 454 (1970-00)
DODT, JEEP - 226 (2002-13)
GMC - 496 (2001-09)
GMC, OLDS - 262 (1992-14)
DODG, CHYL - 167 (1998-10)
GMC - 496 (2001-09)
SCI, TOYO - (2000-14)
BUIC, CHEV, GMC, OLDS, SATU, PONT - 189,
S850
207, 213, 213,214, 214, 237 (1993-11)
CHEV, OLDS, SATU, PONT - 122, 134, 145
S852
S854
S856
S860
S862
S866
S868
S870
S878
(2000-14)
DODT, JEEP, MITS - 285 (1998-10)
DODT, JEEP - 285 (1998-10)
FOTR, MERC, FORD, MAZD - 182 (1986-08)
DODG, CHYL - 167 (1998-10)
DODG, CHYL - 167 (1998-10)
DODG, MITS, CHYL - 152, 181 (1995-12)
DODT, JEEP, MITS - 226 (2002-13)
DODT, JEEP, MITS - 285 (1998-10)
BUIC, CHEV, GMC, HUM, ISUZ, CADL, PONT,
S884
S886
S888
S892
S894
SAAB - 294, 323, 325, 346, 350, 364 (1997-13)
NISS, INFI - (1995-01)
NISS, INFI - (1995-01)
NISS, INFI - (1995-01)
GMC - 496 (2001-07)
BUIC, CHEV, GMC, HUM, PONT, SAAB - 294,
S896
S898
323, 325, 364, 376, 378 (1999-14)
DODG, DODT, JEEP, CHYL - 345, 370 (2003-14)
FOTR, FORD, MAZD - 121, 122, 138, 365
S908A
(2001-15)
BUIC, GMC, HUM, ISUZ, OLDS, SAAB - 169, 178,
S926
S928
S934
S940
S1232
S8004
S8026
211, 223, 256 (2002-12)
HYUN, KIA - (2006-13)
GMC - 262 (2002-14)
DODG, JEEP, CHYL - 201, 230,231, 231 (1990-11)
ACUR, HOND - (2002-15)
NISS, SUZI - (2005-14)
DODT, FOTR, MITS - 140 (1983-87)
NISS - (1983-86)
CRANK SPROCKET
S127
DESO, DODG, DODT, PLYM, CHYU, CHYL - 218,
S246
S250
230, 239, 241, 251, 265 (1968)
GMC, OLDS - 324, 371, 394 (1954-64)
FOTR, MERC, FORD, FOTU - 215, 223, 239, 256,
S256
S262
272, 292, 312 (1964)
CADL - 331, 365 (1949-58)
CHEV, GMC, STUD - 265, 283, 327, 348, 409
S266
(1955-69)
DODG, DODT, PLYM, CHYU - 218, 230, 251, 265
S274
(1968)
CHYL, DESO, DODG, DODT, PLYM, WHTR,
S790
MERC, FORD - 281 (1993-05)
S790P
MERC, FORD - 281, 330, 354,355 (1993-14)
S804T
BUIC, CHEV, OLDS, PONT - 146 (1996-02)
S806
GMC - 454 (1970-00)
S808
JEEP - 242 (1987-06)
S810
BUIC, CHEV, OLDS, PONT - 231 (1990-09)
S812
BUIC, CHEV, OLDS, PONT - 231 (1991-08)
S814
BUIC, CHEV, CADL, PONT - 265, 350 (1992-97)
CHYU, CHYL - 241, 259, 270, 276, 301, 315, 317,
S816
FOTR - 140 (1983-97)
318, 325, 326, 331, 354, 392 (2003)
289
Part No.
Application
Part No.
CRANK SPROCKET (Cont.)
S276
BUIC - 364, 401, 425 (1957-66)
S281
AMC, JEEP, IHC - 250, 287, 290, 304, 327, 343,
NUMERICAL LISTING
Application
CRANK SPROCKET (Cont.)
S431
FOTR, MERC, FORD - 255, 289, 302, 351
(1963-01)
360, 390, 401 (1958-91)
S445
AMC - 304, 360, 401 (1970-79)
S283
MERC, FORD - 383, 430, 462 (1958-68)
S447
FOTR, MERC, FORD - 122, 140 (1974-97)
S289
BUIC, CHEV, GMC, OLDS, WHIT, PONT - 200,
S449
FOTR, MAZD - 110, 122 (1971-84)
229, 262, 265, 267, 283, 302, 305, 307, 327, 350,
S451
FOTR, MAZD - 110, 122 (1971-84)
400 (2002)
S453
FOTR, MAZD - 122 (1979-84)
DESO, DODG, DODT, PLYM, WHTR, CHYU,
S455
DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,
S291
156 (1974-89)
CHYL - 170, 198, 225, 350, 361, 383, 413, 426
S297
(1987)
S463
NISS - (1969-89)
DODG, DODT, PLYM, CHYU, CHYL - 238, 315,
S475
FOTR, MERC, FORD - 351, 400 (1969-79)
317, 318, 340, 354, 360 (2003)
S493
FOTR, MERC, FORD - 351, 400, 429, 460
S299
CADL - 390 (1959-63)
S303
DODT - 251, 265 (1953-68)
S495
BUIC, OLDS, PONT - 229, 265, 301 (1977-81)
S319
GMC - 409 (1962-65)
S499
AMC - 121 (1977-79)
S321
FOTR, MERC, FORD - 332, 352, 360, 361, 390,
S501
GMC, ISUZ, OPEL - 111, 119 (1976-87)
410, 427, 428 (1958-76)
S503
BUIC, CHEV, GMC, OLDS, CADL, PONT - 260,
S323
(1968-97)
350 (1978-85)
BUIC, CHEV, GMC, JEEP, OLDS, OMC, CADL,
PONT - 181, 196, 198, 215, 225, 231, 252, 300,
S505
S327
FOTR, MERC, FORD - 221, 260, 289 (1962-69)
S329
AMC - 196 (1958-65)
S331
FOTR, MERC, FORD - 330, 352, 360, 390, 410,
CHEV, GMC, ISUZ, OLDS, PONT - 200, 229, 262,
350 (1978-02)
340, 350 (1989)
S511
AMC, BUIC, CHEV, GMC, ISUZ, JEEP, OLDS,
PONT - 173, 189, 207 (1980-95)
S515
AMC, JEEP - 290, 304, 343, 360, 390, 401
(1966-91)
427, 428 (1958-77)
CHYL, DESO, DODG, DODT, PLYM, CHYL - 225,
S523
HOND - (1975-84)
361, 383, 400, 413, 426, 440 (1987)
S531
FOTR, MERC, FORD - 302, 351 (1968-01)
S347
GMC - 322 (1956-59)
S533
CADL - 250, 252, 273, 300 (1982-95)
S349
BUIC, CHEV, OLDS, CADL, PONT - 260, 307,
S539
FOTR, MERC, FORD - 232, 238, 256 (1982-08)
330, 350, 403, 455 (1964-90)
S543
MAZD - (1981-85)
S353
FOTR - 359, 361, 389, 391 (1964-78)
S545
MAZD - (1981-85)
S355
AMC, JEEP, IHC - 199, 232, 258 (1964-90)
S549
BUIC, CHEV, GMC, ISUZ, OLDS, CADL, PONT -
S359
DODG, DODT, PLYM, CHYL - 273, 317, 318, 360
S339
121, 122, 134 (1983-03)
(1958-03)
S551
CHEV, TOYO - 98 (1980-97)
S361
OLDS - 400, 425, 455 (1965-76)
S557
NISS - (1982-88)
S365
CADL - 429 (1964-67)
S559
NISS - (1982-89)
S367
DODG, DODT, PLYM, CHYL - 361, 383, 400, 440
S581
AUDI, VOLK - (1978-92)
(1958-79)
S591
NISS - (1966-70)
S369
BUIC - 400, 430, 455 (1967-76)
S593
TOYO - (1981-04)
S375
GMC - 379, 395 (1982-02)
S605
DODG, PLYM - (1971-77)
S391
BUIC, CHEV, GMC, OLDS, CADL, PONT - 262,
S607
AMC, DODT, EAGL, JEEP - 150, 153 (1983-02)
265, 267, 283, 302, 305, 307, 327, 350, 400
S609
BUIC, OLDS, PONT - 181 (1985-88)
(1957-02)
S611
CHEV, PONT - 85, 98 (1976-87)
S393
CHEV, GMC - 396, 402, 427, 454 (1965-00)
S617
MERC, FORD - 140, 153 (1984-94)
S395
CHEV, GMC, WHIT - 366, 396, 402, 427, 454
S619
BUIC, CHEV, OLDS, CADL, PONT - 173, 189, 207
(1985-05)
(2000)
FOTR, MERC, FORD, FOTU - 144, 170, 200
S621
BUIC, OLDS, PONT - 181, 189, 204, 231 (1984-93)
(1983)
S631
TOYO - (1985-91)
S401
FOTR - 370, 429 (1980-98)
S633
DODG, EAGL, MITS, PLYM, HYUN - 90 (1985-94)
S405
CADL - 368, 425, 472, 500 (1968-84)
S640
DODG, DODT, PLYM, CHYL - 135, 153 (1981-95)
S407
DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,
S641
CHEV, ISUZ - 92 (1985-89)
156 (1974-89)
S645
CHEV, GMC, CADL - 350 (1980-02)
S411
DODG, DODT, PLYM - 105 (1978-83)
S649
FOTR, MERC, FORD, MAZD - 182 (1986-08)
S417
DODG, DODT, PLYM, CHYL - 135 (1981-94)
S651
FOTR, MERC, MAZD - 177, 245 (1986-00)
S419
MERC, FORD - 116, 98 (1981-96)
S653
BUIC, CHEV, OLDS, PONT - 138 (1987-95)
S423
MERC, FORD - 97, 98 (1971-80)
S663
AUDI, VOLK - (1982-06)
S397
290
NUMERICAL LISTING
Part No.
Application
Part No.
CRANK SPROCKET (Cont.)
Application
CRANK SPROCKET (Cont.)
S669
SUBU - (1985-94)
S885
NISS, INFI - (1995-01)
S673
SUBU - (1985-94)
S889
DODG, DODT, JEEP, CHYL - 345, 370 (2003-14)
S677
VOLV - (1983-84)
S891
FOTR, FORD, MAZD - 121, 122, 138 (2001-15)
S685
FOTR - 460 (1973-97)
S901
DODG, PLYM - (1977-80)
S689
JEEP - 242 (1987-06)
S913
BUIC, GMC, HUM, ISUZ, OLDS, SAAB - 169, 178,
S693
NISS - (1989-90)
S695
BUIC, OLDS, PONT - 151 (1985-91)
S699
NISS, INFI - (1989-04)
S701
NISS - (1983-89)
S927
DODG, JEEP, CHYL - 201, 230,231, 231 (1990-11)
S703
BMW - (1985-93)
S929
MERC, FORD, MAZD - 183 (1996-12)
S709
DODG, PLYM, CHYL - 153 (1986-95)
S931
HYUN, KIA - (2006-13)
S713
BUIC, CHEV, OLDS, PONT - 151 (1982-92)
S933
HYUN, KIA - (2006-13)
S715
DODG, EAGL, PLYM, CHYL - 201, 230, 230,231,
S937
ACUR, HOND - (2002-15)
231 (1990-10)
NISS, SUZI - (2005-14)
S717
S1221
GMC - 366, 427 (1968-98)
BUIC, SUZI, CADL - 170, 217 (2004-14)
S719
S1229
CHEV, OLDS, PONT - 207 (1991-97)
DODT, FOTR, MITS - 140 (1983-87)
S721
S8005
DODT, JEEP - 238, 318, 360 (1959-03)
DODT, FOTR, MITS - 140 (1983-87)
S729
S8007
BUIC, CHEV, OLDS, PONT - 231 (1988-05)
S731
NISS - (1991-99)
S747
SUBU - (1985-94)
BUIC, CHEV, OLDS, PONT - 138 (1987-95)
S675
S749
S737
NISS - (1991-99)
MERC, FORD - 182 (1986-07)
S751
MERC, FORD - 281 (1991-11)
S863
DODT, JEEP, MITS, CHYL - 226, 285 (1998-13)
S771
TOYO - (1991-97)
S865
DODT, JEEP, MITS - 285 (1998-10)
S773
SATU - 116 (1991-02)
S930
BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT -
S791
MERC, FORD - 281 (1991-11)
S795
OLDS, CADL - 244 (1993-11)
S797
BUIC, CHEV, GMC, CADL, PONT - 265, 305, 350
(1990-02)
211, 223, 256 (2002-12)
S921
BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT 182, 217 (2004-14)
IDLER SPROCKET
182, 217, 220 (2004-15)
S932
BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT 182, 217, 220 (2004-15)
S1225
BUIC, SUZI, CADL - 170, 217 (2004-14)
S1227
BUIC, SUZI, CADL - 170, 217 (2004-14)
S457
TOYO - (1971-82)
S490
TOYO - (1969-74)
S758
CHEV, OLDS, PONT - 207 (1991-97)
S772
BUIC, OLDS, CADL - 244, 281 (1993-11)
S805
BUIC, CHEV, OLDS, PONT - 146 (1996-02)
S807
GMC - 395 (1992-02)
S809
JEEP - 242 (1987-06)
S811
BUIC, CHEV, OLDS, PONT - 231 (1990-09)
S813
FOTR - 140 (1983-97)
S815
GMC - 454 (1970-00)
S817
FOTR - 460 (1973-97)
S819
FOTR, MERC, FORD - 302 (1968-01)
3DR100
ACUR, JAGU, MAZD - (1949-87)
S821
FOTR, MAZD - 245 (1990-00)
3DR102
DODG, DODT, MITS, NISS, PLYM, CHYL, MAZD -
S827
BUIC, CHEV, GMC, HUM, ISUZ, CADL, PONT,
INTERMEDIATE SPROCKET
TIMING CHAIN
122, 156 (1974-89)
SAAB - 294, 323, 325, 346, 350, 364, 376, 378
3DR106
FOTR, MAZD - 110, 122 (1972-84)
(1997-14)
3DR106D
NISS - (1983-89)
S831
GMC - 454 (1970-00)
3DR110
NISS - (1969-84)
S833
MERC, FORD - 155, 183 (1995-12)
3DR112D
NISS - (1981-83)
S835
GMC, OLDS - 262 (1992-14)
3DR114
NISS, SAAB - (1974-88)
S837
GMC - 496 (2001-09)
3DR122
MENZ - (1951-66)
S839
DODG, CHYL - 167 (1998-10)
3DR128
MENZ - (1955-62)
S843
FOTR, MERC, FORD - 281, 330, 415 (1991-14)
3DR130
BUIC, CHEV, OLDS, MENZ, PONT - 138 (1967-95)
S847
BUIC, CHEV, GMC, OLDS, SATU, PONT - 189,
3DR132
MENZ - (1951-66)
207, 213, 213,214, 214, 237 (1993-11)
3DR136
MENZ - (1954-73)
CHEV, GMC, OLDS, SATU, PONT - 122, 134, 145
3DR48
ALFA - (1970-94)
(2000-14)
3DR54
NISS, NISS, AUDI, MGGB - (1965-82)
CHEV, GMC, OLDS, SATU, PONT - 122, 134, 145
3DR60
TOYO, MGGB - (1947-89)
(2000-14)
TOYO, TRIU, MGGB - (1968-79)
S859
3DR62
FOTR, MERC, FORD, MAZD - 182 (1986-08)
JAGU - (1956-62)
S861
3DR68
DODT, JEEP, MITS, CHYL - 226, 285 (1998-13)
RENL - (1966-84)
S869
3DR72
FOTR, MERC, FORD - 281, 330, 415 (1991-14)
3DR74
ROVE - (1964-71)
S849
S851
291
Part No.
Application
Part No.
TIMING CHAIN (Cont.)
NUMERICAL LISTING
Application
TIMING CHAIN (Cont.)
3DR78
3DR82
3DR84
3DR90
3DR94
3DR98
3DRH48
3SR102
3SR106D
3SR44
ROVE - (1952-73)
JAGU - (1949-87)
GMC - 111 (1972-75)
MAZD, PEUG - (1974-87)
NISS, BMW - (1963-81)
PORS, TOYO - (1972-98)
NISS - (1991-04)
NISS, TOYO, MAZD - (1989-04)
NISS - (1983-89)
DODG, EAGL, VOLV, AUDI, BMW, MAZD, PEUG -
169
3SR52
3SR58
3SR60
FOTR, MERC, FORD - 330, 352, 359, 360, 361,
389, 390, 391, 410, 427, 428 (1958-78)
172
FOTR, MERC, BMW, FORD, MAZD - 110, 122, 97,
98 (1962-93)
180
BUIC, CHEV, GMC, OLDS, CADL, PONT - 260,
350 (1978-85)
181
GMC - 379, 395 (1982-02)
185
MERC, FORD - 281 (1991-11)
189
MERC, FORD - 281, 330 (1993-12)
190
NISS - (1991-99)
182 (1963-11)
MGGB - (1954-80)
RENL - (1963-87)
BUIC, CHEV, FOTR, GMC, HUM, ISUZ, MERC,
191
NISS - (1991-99)
192
SATU - 116 (1991-02)
193
DODG, CHYL - 167 (1998-10)
DODT, JEEP, MITS - 226 (2002-13)
CADL, PONT, SAAB - 177, 294, 323, 325, 346,
194
195
BUIC, GMC, HUM, ISUZ, OLDS, SAAB - 169, 178,
3SR62
3SR64
350, 364 (1986-13)
TRIU - (1961-80)
AMC, DODT, EAGL, JEEP, PLYM, RENL - 150,
3SR92
3SR94
153 (1966-02)
NISS, SATU - 116 (1989-02)
DODG, EAGL, GMC, ISUZ, OPEL, VOLV, BMW,
202
CHEV, GMC, CADL - 262, 350 (1980-02)
300
DODG, JEEP, CHYL - 201, 230,231, 231 (1990-11)
AMC, PONT - 196, 370 (1946-65)
3SR96
3SR98
3SRH106
3SRH124
3SRH60
MAZD, PEUG - 111, 119, 182 (1970-93)
TOYO - (1981-95)
TOYO - (1981-90)
TOYO - (1994-04)
NISS, INFI - (1991-02)
BUIC, CHEV, GMC, HUM, ISUZ, CADL, PONT,
339
344
FOTR, MERC, FORD, FOTU - 215, 223, 239, 256,
SAAB - 294, 323, 325, 346, 350, 364, 376, 378,
3SRH64
3SRH92
4SR48
4SR50
8MMSR52
8MMSR54
8MMSR58
8MMSR60
8MMSR70
8MMSR84
8MMSR90
427 (1997-14)
FOTR, MAZD - 245 (1990-00)
NISS - (1991-04)
JEEP - 242 (1987-06)
GMC - 366, 427, 454, 496 (1968-09)
MAZD - (1981-85)
FOTR, MAZD - 122 (1970-85)
MAZD - (1984-91)
TOYO - (1991-97)
SUBU - (1987-95)
MAZD - (1989-94)
DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,
8MMSRH126
8MMSRH62
8MMSRH72
8MMSRH82
160
156 (1976-89)
BUIC, OLDS, CADL - 244, 281 (1993-11)
BUIC, OLDS, CADL - 244, 281 (1993-11)
GMC, OLDS - 262 (1992-14)
TOYO - (1994-04)
DODG, DODT, PLYM, CHYU, CHYL - 238, 259,
161
162
163
270, 315, 317, 318, 340, 354, 360, 488 (2003)
FOTR - 272, 292 (1956-64)
CHEV, GMC - 348, 370, 409 (1957-65)
BUIC, CHEV, FOTR, GMC, MERC, OLDS, WHIT,
FORD, PONT - 200, 229, 262, 265, 267, 283, 302,
168
292
211, 223, 256 (2002-12)
201
DODG, DODT, PLYM, CHYL - 135, 148, 153
(1981-10)
272, 292, 312 (1964)
347
GMC, PONT - 287, 288, 316, 317, 347 (1955-58)
348
CHYL, DESO, DODG, DODT, PLYM, WHTR,
CHYU, CHYL - 241, 259, 270, 276, 301, 315, 317,
318, 325, 326, 331, 354, 392 (2003)
349
AMC, JEEP, CADL, IHC - 250, 287, 290, 304, 322,
327, 343, 346, 360, 390, 401 (1942-91)
350
OLDS, PONT - 195, 326, 350, 389, 400, 421, 428,
455 (1959-79)
351
FOTR, MERC, FORD, FOTU - 144, 170, 200
(1983)
356
FOTR, MERC, FORD - 221, 260, 289 (1962-69)
357
AMC - 196 (1958-65)
358
FOTR, MERC, FORD - 255, 289, 302, 351
(1963-01)
359
BUIC, CHEV, GMC, JEEP, OLDS, OMC, CADL,
MGGB, PONT - 181, 196, 198, 215, 225, 231, 252,
300, 340, 350 (1989)
361
DODG, DODT, PLYM, CHYL - 273, 317, 318, 360
(1958-03)
365
AMC, BUIC, FOTR, MERC, OLDS, FORD, PONT 196, 232, 265, 301 (1958-04)
370
BUIC, CHEV, FOTR, GMC, ISUZ, MERC, OLDS,
CADL, FORD, PONT - 121, 122, 134, 302
(1968-03)
373
AMC, BUIC, CHEV, GMC, ISUZ, JEEP, OLDS,
PONT - 173, 189, 207, 303 (1949-95)
374
AMC, FOTR, JEEP, MERC, FORD, MAZD - 182,
290, 304, 343, 360, 390, 401 (1966-08)
305, 307, 327, 350, 351, 400 (2002)
CHEV, CHYL, DESO, DODG, DODT, FOTR, GMC,
375
BUIC, CHEV, OLDS, PONT - 231 (1988-05)
PLYM, WHIT, CHYL - 225, 361, 366, 370, 383,
376
FOTR, MERC, FORD - 232, 238, 256 (1982-08)
396, 400, 402, 413, 426, 427, 429, 440, 454, 460
377
BUIC, OLDS, PONT - 204 (1989-93)
(2000)
378
BUIC, CHEV, OLDS, PONT - 151 (1982-92)
NUMERICAL LISTING
Part No.
Application
Part No.
TIMING CHAIN (Cont.)
Application
TIMING CHAIN (Cont.)
380
DODT, JEEP - 238, 318, 360, 488 (1959-03)
728F
GMC, HUM, ISUZ - 169, 178, 211, 223 (2004-12)
381A
BUIC, CHEV, OLDS, PONT - 231 (1990-09)
753
BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT -
382
CHEV, OLDS, PONT - 207 (1991-97)
383
BUIC, CHEV, OLDS, PONT - 138 (1987-95)
383M
BUIC, CHEV, OLDS, PONT - 138 (1987-95)
384
BUIC, OLDS, PONT - 138 (1992-94)
900C
HYUN, KIA - (2006-13)
384M
BUIC, OLDS, PONT - 138 (1992-94)
901C
HYUN, KIA - (2006-13)
385
BUIC, CHEV, ISUZ, JEEP, OLDS, CADL, PONT -
1007
BUIC, SUZI, CADL - 170, 217 (2004-14)
173, 189, 207, 242, 262 (1985-06)
1044
BUIC, SUZI, CADL - 170, 217 (2004-14)
387
FOTR, MERC, FORD - 281 (1991-13)
4178C
INFI - (1990-96)
388
DODG, EAGL, PLYM, CHYL - 201, 230, 230,231,
4179C
INFI - (1990-96)
231 (1990-10)
4201F
CHEV, GMC, OLDS, SATU, PONT - 122, 134, 145
182, 217, 220 (2004-15)
754
BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT 182, 217, 220 (2004-15)
390
BUIC, CHEV, OLDS, PONT - 146 (1996-02)
391
FOTR, MERC, FORD - 330, 415 (1997-14)
392
MERC, FORD - 155, 183 (1995-12)
393
DODT, JEEP, MITS, CHYL - 226, 285 (1998-13)
4207C
NISS, INFI - (1995-01)
394
DODT, JEEP, MITS - 285 (1998-10)
4208C
NISS, INFI - (1995-01)
395
BUIC, CHEV, GMC, ISUZ, OLDS, CADL, PONT -
4214C
SCI, TOYO - (2000-14)
MIC100
FOTR, MERC, FORD - 122, 140 (1974-97)
MIC200
MERC, FORD - 116 (1985-96)
MOC200
MERC, FORD - 116 (1985-96)
MOC300
TOYO - (1981-95)
2050
NISS - (1981-83)
2202
TOYO - (1960-87)
2500
CHEV, GMC - 217, 235, 248, 261, 270, 302
(2000-14)
4202F
CHEV, GMC, OLDS, SATU, PONT, SAAB - 122,
134, 145 (2000-14)
TIMING COVER
121, 122, 134 (1983-03)
396
FOTR, MERC, FORD, MAZD - 182 (1986-08)
397
DODG, CHYL - 167 (1998-10)
491
BUIC, FOTR, MERC, FORD, FOTU - 322, 364,
383, 401, 425, 429, 430, 460, 462 (1997)
494
AMC, CHEV, DODT, FOTR, GMC, JEEP, MERC,
OLDS, FORD, IHC - 199, 232, 251, 258, 265, 324,
332, 348, 351, 352, 360, 361, 371, 390, 394, 400,
406, 409, 410, 425, 427, 428, 455 (1953-90)
495
CHEV, DESO, DODG, DODT, PLYM, WHTR,
CHYU, CHYL - 170, 198, 225, 350, 361, 383, 396,
413, 426 (1987)
498
BUIC, CHEV, FOTR, MERC, OLDS, CADL, FORD,
PONT - 260, 307, 330, 350, 351, 368, 400, 403,
425, 430, 455, 472, 500 (1964-90)
499
BUIC, CHEV, GMC, ISUZ, OLDS, CADL, PONT 200, 229, 262, 265, 267, 283, 302, 305, 307, 327,
331, 350, 365, 400, 429 (1949-02)
501
CHEV, DODG, DODT, GMC, PLYM, CHYU, CHYL
- 361, 383, 396, 400, 402, 427, 440, 454 (2000)
503
CADL - 250, 252, 273, 300 (1982-95)
505
CHEV, GMC, JEEP, MERC, CADL, CONT, FORD,
STUD - 140, 153, 226, 265, 283, 327, 390, 429
(1994)
507
GMC - 454 (1970-00)
700
BUIC, CHEV, FOTR, GMC, MERC, OLDS, SATU,
PONT - 189, 207, 213, 213,214, 214, 237, 302
(1968-11)
704
DODG, DODT, JEEP, CHYL - 345, 370 (2003-14)
705
FOTR, MERC, MAZD - 138, 140 (2001-12)
706F
FOTR, FORD, MAZD - 121, 122, 138 (2001-15)
CAM GEAR
(1939-62)
2514
CHEV, GMC - 217, 235, 248, 261, 270, 302
(1939-62)
2524
BUIC, CHEV, GMC, OLDS, PONT, STUD - 151,
153, 194, 230, 250 (1962-92)
2526
CHEV, GMC, OLDS, PONT - 250, 292 (1963-89)
2534
OMC, MERC - 283, 305, 307, 327, 350
2542
AMC, BUIC, CHEV, GMC, JEEP, OLDS, PONT,
STUD - 151, 153, 194, 215, 230, 250 (1962-93)
2544
BUIC, OLDS, PONT - 151 (1985-91)
2620
CONT
2652
CONT
2652A
CONT
2660
CONT
2702
FOTR, MERC, FORD - 239, 255 (1932-53)
2733
FOTR, FOTU - 302, 332 (1963)
2900
HENR, JEEP, WHIT - 134 (1973)
3320
IHC - 537 (1980)
3342
FOTR, IHC - 420, 444, 445 (1983-04)
4706
FOTT, FOTR, MERC, FORD - 221, 239 (1932-53)
NISS - (1981-83)
CRANK GEAR
708
MERC, FORD, MAZD - 183 (1996-12)
2051
711F
ACUR, HOND - (2002-15)
2203
TOYO - (1960-87)
712F
ACUR, HOND - (2002-15)
2501
BUIC, CHEV, GMC, OLDS, PONT, STUD - 153,
719
NISS, SUZI - (2005-14)
721
NISS, SUZI - (2005-14)
2527
CHEV, GMC - 250, 292 (1963-89)
727F
FOTR, FORD, MAZD - 121, 122 (2004-15)
2535
OMC, MERC - 283, 305, 307, 327, 350
194, 215, 217, 230, 235, 250, 261 (1940-84)
293
Part No.
Application
Part No.
NUMERICAL LISTING
Application
CRANK GEAR (Cont.)
2537
3PC SET (Cont.)
AMC, BUIC, CHEV, GMC, JEEP, OLDS, PONT -
3-3SR92A
SATU - 116 (1991-02)
151, 250 (1966-93)
3-3SRH60S
BUIC, CHEV, GMC, HUM, PONT, SAAB - 294,
2603
CASE, CONT, OLTR - 226
2661
CONT
2701
FOTR, MERC, FORD - 239, 255 (1932-53)
2737
FOTR, FOTU - 401, 475, 477, 534 (1981)
3-3SRH64
FOTR, MAZD - 245 (1990-00)
2748
FOTR, FOTU - 262 (1964)
3-3SRH64A
FOTR, MAZD - 245 (1990-00)
2843
GMC - 401,
3-4SR48
JEEP - 242 (1987-06)
323, 325, 364, 376, 378 (1999-14)
3-3SRH60SA
BUIC, CHEV, GMC, HUM, ISUZ, CADL, PONT,
SAAB - 294, 323, 325, 346, 350, 364 (1997-13)
419,420,421,423,425,426,427,428,429,430,434,43- 3-4SR50
5,436,439,440,441,442,444,445,446, 702 (1960-74) 3-4SR50SA
GMC - 366, 427 (1968-98)
GMC - 454 (1970-00)
2847
GMC - 636 (1965-74)
3-4SR50SB
GMC - 496 (2001-09)
2881
DETD
3-4SR50SC
GMC - 496 (2001-09)
2883
DETD
3-4SR50SD
GMC - 496 (2001-07)
2901
HENR, JEEP, WHIT - 134 (1973)
3-4SR50SE
GMC - 454 (1970-00)
3033
HERC
3-8MMSRH72S GMC, OLDS - 262 (1992-14)
3315
IHC - 466 (1990-12)
3-8MMSRH72-
3321
IHC - 537 (1980)
SA
3341
FOTR, IHC - 420, 444, 445 (1983-04)
3-160S
5401
WAUK, OLTR - 129, 144, 180, 190, 216, 231, 265
GEAR SET
2516S
CHEV, GMC - 217, 235, 261 (1940-62)
2525S
CHEV, GMC, OLDS, PONT, STUD - 153, 194, 230,
250 (1962-84)
2528S
CHEV, GMC, OMC, MERC - 153, 181, 250, 292
(1989)
2538S
BUIC, CHEV, GMC, OLDS, PONT - 151, 250
(1966-92)
2540S
CHEV, GMC, OLDS, PONT - 250 (1966-84)
2542S
AMC, BUIC, CHEV, GMC, JEEP, OLDS, PONT 151, 250 (1968-93)
2544S
BUIC, OLDS, PONT - 151 (1985-91)
2727S
FOTR, MERC, FORD - 239, 255 (1932-53)
2750AS
FOTR, FORD - 240, 300 (1965-96)
2760SA
FOTR, MERC, FORD - 171 (1974-85)
2764S
FOTR, FORD, FOTU - 240, 300 (1996)
2766AS
FOTR, FORD - 240, 300 (1965-96)
2766S
FOTR, FORD - 240, 300 (1965-96)
3320S
IHC - 537 (1980)
3327S
IHC
3335S
IHC - 404, 446 (1980)
3336S
IHCT, IHC - 152, 196, 266, 304, 345, 392 (1985)
3342S
FOTR - 420, 445 (1983-03)
3504S
DODT - 331, 354 (1954-59)
3512S
DODT - 361 (1960-77)
4710S
FOTT, FOTU - 134, 144, 172 (1964)
IDLER GEAR
2842
2845
GMC - 401,
ACUR, ALFA, CHEV, DODG, DODT, PLYM, CHYL,
AMC - 238, 317, 318, 340, 343, 360, 85 (1958-03)
3-163S
ALFA, BUIC, CHEV, GMC, OLDS, WHIT, PONT 200, 229, 262, 265, 267, 283, 302, 305, 307, 327,
350, 400 (2002)
3-163SA
FOTR, MERC, FORD - 302, 351 (1968-95)
3-163SB
FOTR, MERC, FORD - 302, 351 (1968-01)
3-168S
DODG, DODT, PLYM, CHYL - 361, 413, 426, 440
(1960-78)
3-168SA
DESO, DODG, DODT, PLYM, CHYL - 361, 383,
400, 413, 426, 440 (1958-79)
3-168SC
FOTR - 370, 429 (1980-98)
3-168SD
FOTR - 460 (1973-97)
3-168SE
FOTR - 460 (1973-97)
3-169S
FOTR, MERC, FORD - 330, 352, 360, 390, 410,
427, 428 (1958-77)
3-169SA
FOTR - 330, 359, 361, 389, 391 (1964-78)
3-171S
CHEV, GMC, WHIT - 366, 396, 402, 427, 454
(2000)
3-172S
MERC, FORD - 97, 98 (1971-73)
3-181S
GMC - 379, 395 (1982-02)
3-181SA
GMC - 395 (1992-02)
3-192SA
SATU - 116 (1991-02)
3-202S
GMC - 350 (1980-96)
3-202SA
GMC, CADL - 350 (1996-02)
3-344S
FOTR, MERC, FORD, FOTU - 215, 223, 239, 256,
272, 292, 312 (1964)
3-349S
AMC, JEEP - 290, 304, 343, 360, 390, 401
(1966-91)
3-350S
OLDS, PONT - 195, 326, 350, 389, 400, 421, 428,
455 (1959-79)
419,420,421,423,425,426,427,428,429,430,434,43- 3-351S
5,436,439,440,441,442,444,445,446, 702 (1960-74)
FOTR, MERC, FORD, FOTU - 144, 170, 200
GMC - 636 (1970-72)
3-356S
FOTR, MERC, FORD - 221, 260, 289 (1962-69)
3-358S
FOTR, MERC, FORD - 289, 302, 351 (1963-01)
3PC SET
3-3DR130
GMC - 262 (2002-14)
(1983)
FOTR, MERC, FORD - 255, 302, 351 (1968-01)
3-3SR60
ACUR, BUIC, CHEV, OLDS, PONT - 138 (1987-14) 3-358SA
FOTR, MERC, PONT - 177, 323 (1986-08)
3-359S
3-3SR64
AMC, DODT, EAGL, JEEP - 150, 153 (1983-02)
231, 300, 340, 350 (1980)
294
BUIC, JEEP, OLDS, OMC, PONT - 198, 215, 225,
NUMERICAL LISTING
Part No.
Application
Part No.
3PC SET (Cont.)
Application
3PC SET (Cont.)
3-359SB
BUIC, CHEV, GMC, OLDS, CADL, PONT - 181,
3-499SA
CHEV, GMC, PONT - 200, 229, 262, 350 (1978-96)
3-501S
CHEV, GMC - 396, 402, 427, 454 (1965-00)
3-359SC
3-361S
196, 231, 252 (1977-05)
BUIC, OLDS, PONT - 181, 231 (1984-88)
DODG, DODT, PLYM, CHYL - 273, 317, 318, 360
3-501SA
CHYL, DODG, DODT, PLYM, CHYU, CHYL - 361,
3-503S
CADL - 252, 273 (1982-89)
3-365S
3-365SA
3-370S
(1958-03)
BUIC, OLDS, PONT - 265, 301 (1977-81)
FOTR, MERC, FORD - 232 (1982-04)
BUIC, CHEV, GMC, OLDS, CADL, PONT - 121,
3-503SB
CADL - 250, 273, 300 (1987-95)
3-505S
MERC, FORD - 140, 153 (1984-94)
3-506SB
CHEV, GMC, OLDS, MERC, PONT - 262 (1996)
3-370SA
3-372S
122, 134 (1983-02)
BUIC, CHEV, GMC, OLDS, PONT - 134 (1992-03)
BUIC, CHEV, OLDS, CADL, PONT - 173, 189
3-506SC
BUIC, CHEV, GMC, OLDS, CADL, PONT - 305,
BUIC, GMC, CADL - 305, 350 (1990-02)
3-373S
(1985-95)
AMC, BUIC, CHEV, GMC, ISUZ, JEEP, OLDS,
3-506SE
3-507S
GMC - 454 (1970-00)
GMC, ISUZ, OLDS, MERC - 262 (2002)
3-374S
3-374SA
PONT - 173, 189, 207 (1980-95)
FOTR, MERC, FORD, MAZD - 182 (1986-08)
AMC, JEEP - 290, 304, 343, 360, 390, 401
3-509S
3-509SA
BUIC, CHEV, CADL, PONT - 265, 350 (1992-97)
3-509SB
CHEV, PONT - 350 (1992-97)
BUIC, CHEV, GMC, OLDS, SATU, PONT - 189,
3-375S
3-375SA
3-376S
3-377S
3-377SA
3-378S
3-378SA
3-380S
3-380SA
3-381AS
3-381ASB
3-382S
3-383S
3-384S
3-385S
3-388S
(1966-91)
BUIC, OLDS, PONT - 231 (1988-91)
BUIC, CHEV, OLDS, PONT - 231 (1988-05)
FOTR, MERC, FORD - 232, 238, 256 (1982-08)
BUIC, OLDS - 204 (1989-93)
BUIC, OLDS, PONT - 204 (1989-93)
BUIC, OLDS, PONT - 151 (1985-91)
BUIC, CHEV, OLDS, PONT - 151 (1982-92)
DODT, JEEP - 238, 318, 360 (1959-03)
DODT - 238 (1987-03)
BUIC, CHEV, OLDS, PONT - 231 (1990-09)
BUIC, CHEV, OLDS, PONT - 231 (1991-09)
CHEV, OLDS, PONT - 207 (1991-97)
BUIC, CHEV, OLDS, PONT - 138 (1987-95)
BUIC, OLDS, PONT - 138 (1992-94)
BUIC, CHEV, OLDS, PONT - 189, 207 (1993-05)
DODG, EAGL, PLYM, CHYL - 201, 230, 230,231,
3-700S
3-390S
3-395S
231 (1990-10)
BUIC, CHEV, OLDS, PONT - 146 (1996-02)
BUIC, CHEV, GMC, ISUZ, OLDS, PONT - 134
3-396S
3-489S
3-491S
3-491SA
3-494S
3-494SA
(1992-03)
FOTR, MERC, FORD, MAZD - 182 (1986-08)
CHEV, GMC, STUD - 265, 283, 327 (1955-69)
FOTR, MERC, FORD, FOTU - 429, 460 (1997)
FOTR, MERC, FORD - 429, 460 (1968-78)
AMC, JEEP, IHC - 199, 232, 258 (1964-90)
FOTR, MERC, FORD - 352, 360, 390, 410, 427,
3-494SB
3-494SC
3-494SD
3-495S
428 (1958-76)
FOTR, MERC, FORD - 351, 400 (1969-82)
FOTR - 360, 390 (1968-76)
OLDS - 400, 425, 455 (1965-76)
DODG, DODT, PLYM, WHTR, CHYL - 170, 198,
3-498S
3-498SA
3-498SB
3-498SC
225 (1960-87)
CADL - 368, 425, 472, 500 (1968-84)
BUIC - 400, 430, 455 (1967-76)
FOTR, MERC, FORD - 351, 400 (1969-79)
BUIC, CHEV, OLDS, CADL, PONT - 260, 307,
3-499S
383, 400, 440 (1979)
350 (1976-02)
207, 213, 213,214, 214, 237 (1994-10)
3-700SA
FOTR, MERC, FORD - 302 (1968-01)
3-3235S
DODG, JEEP, CHYL - 201, 230,231, 231 (1990-11)
BALANCE SHAFT ELIMINATION KIT
BSEK122
DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,
156 (1976-89)
TIMING KIT
3DR102-1
NISS - (1980-86)
3DR102-2
DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,
156 (1974-89)
3DR106-2
MAZD - (1979-84)
3DR106-3
FOTR, MAZD - 122 (1979-84)
3DR106D-1
NISS - (1983-89)
3DR110-1
NISS - (1969-74)
3DR110-2
NISS - (1970-84)
3DR110-3
NISS - (1975-83)
3DR114-1
NISS - (1974-80)
3DR54-1
NISS - (1973-82)
3DR60-1
TOYO - (1971-89)
3DR62-1
TOYO - (1969-74)
3DR98-1
TOYO - (1975-90)
3SR102-1
NISS - (1989-97)
3SR92-1
NISS - (1989-90)
3SR94-1
GMC, ISUZ, OPEL - 111 (1976-84)
3SR94-2
GMC, ISUZ - 119 (1982-87)
3SR96-1
TOYO - (1981-95)
3SR96-1HD
TOYO - (1981-95)
3SR98-1
TOYO - (1981-90)
8MMSR90-1
DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,
156 (1976-89)
3-3DRH48
NISS - (1991-04)
3-3SR60AS
FOTR - 177 (1986-92)
3-3SR64S
AMC, DODT, EAGL, JEEP - 150, 153 (1983-02)
3-3SR92
SATU - 116 (1991-02)
3-3SRH106
TOYO - (1994-04)
330, 350, 403, 455 (1964-90)
BUIC, CHEV, GMC, OLDS, PONT - 262, 267, 283,
3-3SRH124S
NISS, INFI - (1991-02)
3-3SRH64AS
FOTR, MAZD - 245 (1990-00)
302, 305, 307, 327, 350, 400 (1957-02)
3-3SRH64S
FOTR, MAZD - 245 (1990-00)
295
Part No.
Application
Part No.
TIMING KIT (Cont.)
NUMERICAL LISTING
Application
TIMING KIT (Cont.)
3-8MMSRH62S BUIC, OLDS, CADL - 244, 281 (1993-11)
3-8MMSRH62- OLDS, CADL - 244 (1993-11)
3-711S
HOND - (2002-14)
3-724S
NISS - (2000-06)
SA
3-727S
FOTR, FORD, MAZD - 121, 122 (2004-15)
DODG, DODT, MITS, PLYM, CHYL, MAZD - 122,
3-752S
LEXU, SCI, TOYO - (2001-13)
156 (1976-89)
3-753S
BUIC, CHEV, GMC, SATU, SUZI, CADL, PONT -
3-102S
3-191S
NISS - (1991-99)
3-192S
SATU - 116 (1991-02)
3-900CS
HYUN, KIA - (2006-13)
3-195S
BUIC, GMC, ISUZ, OLDS, SAAB - 256 (2002-09)
3-900CSA
HYUN, KIA - (2006-13)
3-195SA
GMC, HUM, ISUZ - 178, 223 (2007-12)
3-0250S
MAZD - (2003-13)
3-195SB
GMC, ISUZ, SAAB - 256 (2002-09)
3-0420S
TOYO - (2000-06)
3-195SC
GMC, HUM, ISUZ - 169, 211 (2004-06)
3-0430S
NISS - (2007-13)
3-383SB
BUIC, CHEV, OLDS, PONT - 138 (1987-95)
3-0460S
NISS - (2004-13)
3-385SA
JEEP - 242 (1987-06)
3-0470S
TOYO - (2003-13)
3-385SB
JEEP - 242 (1987-06)
3-0490S
TOYO - (2005-13)
3-385SC
BUIC, CHEV, OLDS, PONT - 189, 207 (1993-05)
3-0719S
NISS - (2005-14)
3-387SA
FOTR, MERC, FORD - 281 (1991-13)
3-1007S
BUIC, SUZI, CADL - 170, 217 (2004-14)
3-387SAX
FOTR, MERC, FORD - 281 (1991-13)
3-4167S
TOYO - (1995-04)
3-387SC
FOTR, MERC, FORD - 281 (1991-13)
3-4198S
SUZI - (1996-12)
3-387SG
FOTR, MERC, FORD - 281 (1991-13)
3-4200SA
CHEV, TOYO, PONT - 110 (1998-08)
3-387SGF
MERC, FORD - 281 (1993-05)
3-4201S
CHEV, OLDS, SATU, PONT - 122, 134, 145
3-387SGX
FOTR, MERC, FORD - 281 (1991-13)
3-387SHF
MERC, FORD - 281 (1993-05)
3-387SIF
FOTR, MERC, FORD - 281 (1991-13)
3-387SJF
FORD - 281 (1996-01)
3-387SKF
FORD - 281 (1996-04)
3-390SA
BUIC, CHEV, OLDS, PONT - 146 (1996-02)
3-4207S
NISS, INFI - (1995-01)
3-391S
FOTR, MERC - 330, 415 (1997-14)
3-4207SX
NISS, INFI - (1995-01)
3-391SA
MERC - 330 (1999-04)
3-4210SA
NISS - (1991-04)
3-391SB
FOTR - 415 (1997-13)
3-4212S
NISS - (2002-13)
3-391SC
FOTR, MERC - 330 (1997-14)
3-4212SA
NISS, SUZI - (2002-13)
3-391SD
FOTR - 415 (1997-13)
3-4214SA
SCI, TOYO - (2000-14)
3-391SE
MERC, FORD - 330 (1999-12)
B-036-1
TOYO - (1988-97)
3-391SG
FOTR - 415 (1997-13)
B-041-1B
HOND - (1975-84)
3-392S
MERC, FORD - 155, 183 (1995-12)
B-070-1
CHEV, TOYO - 98 (1980-88)
3-393S
DODT, JEEP - 285 (1998-10)
B-0114-1
3-393SA
DODT, JEEP - 226 (2002-13)
3-393SB
DODT, JEEP, MITS - 226 (2002-13)
3-393SC
DODT, JEEP, MITS - 285 (1998-10)
3-393SD
DODT, JEEP - 226 (2002-13)
3-393SX
DODT, JEEP - 285 (1998-10)
3-397S
DODG, CHYL - 167 (1998-10)
3-397SA
DODG, CHYL - 167 (1998-10)
3-397SB
DODG, CHYL - 167 (1998-10)
3-397SBX
DODG, CHYL - 167 (1998-10)
3-397SX
DODG, CHYL - 167 (1998-10)
3-398S
FOTR, MERC, FORD, MAZD - 244, 245 (1997-11)
3-398SA
FOTR, MERC, FORD, MAZD - 244, 245 (1997-11)
3-505SA
MERC, FORD - 140, 153 (1984-94)
3-700SB
BUIC, CHEV, GMC, OLDS, SATU, PONT - 189,
207, 213, 213,214, 214, 237 (1993-09)
3-704S
DODG, DODT, JEEP, CHYL - 345, 370 (2003-14)
3-705S
FOTR, MAZD - 138 (2001-12)
3-705SX
FOTR, MAZD - 138 (2001-12)
3-708S
MERC, FORD, MAZD - 183 (1996-12)
3-708SA
MERC, FORD, MAZD - 183 (1996-12)
296
182, 217, 220 (2004-15)
(2000-14)
3-4201SX
CHEV, GMC, OLDS, SATU, PONT - 122, 134, 145
(2000-14)
3-4202S
CHEV, OLDS, SATU, PONT - 122, 134, 145
(2000-14)
DODG, PLYM, CHYL - 153 (1986-95)
CAMSHAFT SPROCKET ACTUATOR
VCTA-1000
FOTR, MERC, FORD - 281, 330 (2004-14)
VARIABLE CAM TIMING SOLENOID
VCTS-1000
FOTR, MERC, FORD - 281, 330 (2004-14)
VARIABLE CAM TIMING HOUSING
VCTH-1000L
FOTR, MERC - 330 (2004-14)
VCTH-1000R
FOTR, MERC - 330 (2004-14)
NUMERICAL LISTING
ABBREVIATIONS USED TO
INDICATE CAR, TRUCK MANUFACTURERS
BUIC:
CADL:
CHEV:
CHYL:
FORD:
HUM:
ISUZ:
OLDS:
PONT:
SAAB:
PERFORMANCE - BUICK
PERFORMANCE - CADILLAC
PERFORMANCE - CHEVROLET CARS & TRUCKS
PERFORMANCE - CHRYSLER PRODUCTS
PERFORMANCE - FORD PRODUCTS & TRUCKS
PERFORMANCE - HUMMER
PERFORMANCE - ISUZU
PERFORMANCE - OLDSMOBILE
PERFORMANCE - PONTIAC
PERFORMANCE - SAAB
3 PC SET
40201
40202
40203
40204
40205
40206
40210
40217
40400
40401
40402
40403
40404
40405
40406
40407
40408
40409
40410
40500
40510
40520
48500T-9
48500W-9
48510T-9
48510W-9
48520T-9
48520W-9
48530T-9
48551T-9
48560T-9
48561T-9
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-04)
DODG, CHYL - 273, 318, 340, 360 (1965-03)
CHYL - 361, 383, 400, 413, 426, 440 (1959-78)
FORD - 352, 360, 390, 406, 427, 428 (1958-76)
CHEV - 396, 400, 402, 427, 454 (1965-97)
FORD - 260, 289, 302, 351 (1962-01)
BUIC - 350 (1972-81)
DODG, CHYL - 426, 440 (1978)
CHEV, PONT - 229, 262, 267, 283,
302, 305, 307, 327, 350, 400 (2004)
CHEV - 396, 400, 402, 427, 454, 502
(1997)
DODG, FORD - 260, 289, 302, 340, 351 (2001)
FORD - 429, 460 (1997)
BUIC - 181, 231, 252 (1977-87)
FORD - 351, 400 (1970-82)
CHYL - 273, 318, 340, 360 (2003)
CHYL - 361, 383, 400, 413, 426, 440 (1978)
PONT - 326, 350, 389, 400, 421, 428, 455
(1959-77)
OLDS - 260, 400, 403, 425, 455 (1965-82)
FORD - 352, 360, 390, 406, 427, 428 (1958-76)
CHEV, PONT - 267, 283, 302, 305, 307, 327,
350, 400 (1957-02)
CHEV - 396, 400, 402, 427, 454 (1965-97)
CHEV, PONT - 262, 267, 283, 302, 305, 307,
327, 350, 400 (1957-04)
CHEV, BUIC, OLDS, PONT - 200, 229, 262, 265,
267, 283, 302, 305, 307, 327, 350, 400 (1955-04)
CHEV, BUIC, OLDS, PONT - 200, 229, 262, 265,
267, 283, 302, 305, 307, 327, 350, 400 (1955-04)
CHEV - 396, 400, 402, 427, 454 (1965-97)
CHEV - 396, 400, 402, 427, 454 (1965-97)
FORD - 289, 302, 351 (1963-01)
FORD - 289, 302, 351 (1963-01)
FORD - 429, 460 (1968-97)
FORD - 255, 302, 351 (1968-01)
CHEV, BUIC, CADL, PONT, ISUZ, HUM, SAAB 294, 323, 325, 346, 350, 364 (1997-14)
CHEV, BUIC, CADL, PONT, ISUZ, HUM, SAAB 294, 323, 325, 346, 350, 364 (1997-14)
297
COMPETITOR INTERCHANGE
Cloyes Part #
2500
2501
2514
2522
2524
2526
2527
2534
2535
2537
2542
2544
2701
2702
2737
2823
2900
2901
3341
3342
9-3100
9-3103
9-3104
9-3108
9-3110
9-3125
9-3132
9-3137
9-4004
9-4005
9-4007
9-4013
9-4023
9-4025
9-4027
9-4032
9-4034
9-4035
9-4054
9-4056
9-4057
9-4058
9-4076
9-4131
9-4133
298
Melling Part #
2500
2501
2514
2524
2524
2526
2527
2534
2535
2537
2542
2544
2701
2702
2737
2823
2900
2901
3341
3342
40201
40202
40203
40204
40205
40217
40210
40212
3SR44
172
3SR94
3SR62
3SR64
3DR54
3DR94
8MMSR54
3DR90
8MMSR52
3DR54
3DR58
3DR60
3DR62
3DR98
3DR102
3DR106
Cloyes Part #
9-4134
9-4136
9-4141
9-4143
9-4145
9-4147
9-4148
9-4149
9-4151
9-4152
9-4159
9-4160
9-4161
9-4162
9-4163
9-4164
9-4166
9-4167
9-4168
9-4172
9-4173
9-4174
9-4175
9-4176
9-4177
9-4178
9-4179
9-4180
9-4185
9-4186
9-4187
9-4189
9-4190
9-4191
9-4194
9-4196
9-4197
9-4201
9-4202
9-4205
9-4207
9-4208
9-4210
9-4214
9-5001
Melling Part #
3DR110
3DR114
3SR98
3DR54
8MMSR90
3DR106D
3SR96
202
3SR60
3DR130
3SR106D
4SR48
3SR102
8MMSR84
3SR102
3SR92
8MMSR70
3SR102
8MMSR60
3SRH64
3SR94
190
191
3DRH48
3SRH124
4178C
4179C
3SRH92
4SR50
8MMSRH126
8MMSRH62
192
8MMSRH72
201
3SRH60
3SRH106
8MMSRH82
4201F
4202F
3SRH60
4207C
4208C
3SRH92
4214C
BT01
COMPETITOR INTERCHANGE
Cloyes Part #
9-5007
9-5008
9-5011
9-5014
9-5016
9-5017
9-5023
9-5025
9-5026
9-5028
9-5030
9-5031
9-5032
9-5033
9-5034
9-5040
9-5045
9-5046
9-5047
9-5048
9-5049
9-5051
9-5054
9-5055
9-5059
9-5061
9-5062
9-5063
9-5064
9-5066
9-5074
9-5077
9-5089
9-5090
9-5091
9-5096
8-5100
9-5100
9-5101
9-5102
9-5103
9-5104
9-5105
9-5106
9-5107
Melling Part #
BT07
BT08
BT11
BT63
BT16
BT17
BD23
BD25
BD26
BD28
BD30
BD31
BD32
BD33
BD34
BD40
BD45
BT46
BT47
BG48
BT49
BG51
BG127
BG55
BD59
BT61
BD34
BT63
BG64
BT66
BD74
BG77
BT89
BT93
BT91
BT96
48400
BT100
BD101
BD102
BT103
BT104
BT105
BT106
BT107
Melling Part #
Cloyes Part #
9-5109
8-5110
9-5114
9-5115
9-5121
9-5122
9-5123
9-5124
9-5126
9-5127
9-5131
9-5132
9-5133
9-5134
8-5135
8-5145
9-5148
9-5154
9-5155
9-5157
9-5158
9-5159
9-5160
9-5161
9-5162
9-5163
9-5164
9-5165
9-5166
9-5167
9-5168
9-5169
9-5170
9-5171
9-5172
9-5173
9-5175
9-5176
9-5177
9-5178
9-5179
9-5181
9-5186
9-5187
9-5188
BT117
48410
BT92
BT5115
BG127
BG128
BD27
BT120
BT116
BT127
BD131
BD132
BD102
BT134
48420
48450
BT148
BT140
BT141
BT157
BD44
CB200
BT160
BT161
BT162
BT113
BT164
BT117
BT166
BT167
BT168
BG169
BG170
BG171
BG172
BG173
BD58
BT176
BG177
BG179
BT179
BG181
BT143
BG187
BT188
299
COMPETITOR INTERCHANGE
Cloyes Part #
9-5189
9-5190
9-5192
9-5194
9-5195
9-5196
9-5197
9-5198
9-5200
9-5202
9-5203
9-5205
9-5206
9-5207
9-5209
9-5213
9-5214
9-5215
9-5216
9-5220
9-5222
9-5223
9-5225
9-5227
9-5229
9-5230
9-5234
9-5235
9-5236
9-5239
9-5240
9-5243
9-5244
9-5245
9-5246
9-5247
9-5248
9-5251
9-5254
9-5255
9-5256
9-5257
9-5259
9-5260
9-5261
300
Melling Part #
CB100
CB300
BT192
BT194
BT195
BT196
BT197
BT198
BG200
BT202
BT203
BT205
BT206
BT207
BT209
BT213
BT214
BT215
BT216
BT220
BT5222
BT5223
BT225
BT227
BT229
BT230
BG234
BT235
BT236
BG239
BG240
BT5243
BT5244
BT245
BG246
BG247
BG248
BG5251
BG5254
BG5255
BG5256
BG5257
BT5259
BT260
BG261
Melling Part #
Cloyes Part #
9-5262
9-5263
9-5268
9-5271
9-5280
9-5281
9-5292
9-5293
9-5295
9-5297
9-5298
9-5299
9-5300
9-5301
9-5302
9-5304
9-5305
9-5306
9-5307
9-5308
9-5309
9-5310
9-5311
9-5312
9-5313
9-5314
9-5315
9-5316
9-5317
9-5318
9-5319
9-5320
9-5323
9-5324
9-5325
9-5326
9-5327
9-5328
9-5329
9-5330
9-5331
9-5332
9-5336
9-5337
9-5338
BT5262
BT263
BT5268
BT271
BT5280
BT5281
BT5292
BT293
BD295
BG297
BT298
BT5299
BT5300
BT301
BT111
BG304
BG305
BG306
BG307
BT308
BG309
BG310
BD311
BD312
BT313
BT314
BG315
BG316
BD321
BD322
BG319
BG320
BT323
BT129
BT325
BT128
BT327
BG328
BG329
BG330
BG331
BG332
BD336
BG337
BT402
COMPETITOR INTERCHANGE
Cloyes Part #
9-5339
9-5340
9-5341
9-5342
9-5344
9-5345
9-5346
9-5347
9-5350
9-5354
9-5355
9-5356
9-5357
9-5358
9-5359
9-5360
9-5361
9-5362
9-5363
9-5364
9-5365
9-5366
9-5367
9-5369
9-5370
9-5371
9-5372
9-5375
9-5381
9-5382
9-5383
9-5384
9-5385
9-5386
9-5387
9-5388
9-5390
9-5391
9-5392
9-5393
9-5394
9-5395
9-5396
9-5397
9-5400
Melling Part #
BT403
BD322
BD321
BT342
BD344
BT345
BG180
BG233
BT350
BT326
BT355
BT356
BT357
BT358
BT359
BG360
BD361
BD362
BD363
BD364
BG365
BG366
BG367
BT402
BT403
BT402
BT403
BG5375
BG5381
BG5382
BT5383
BG5384
BG5385
BG5386
BT428
BD600
BT5390
BT417
BG415
BG416
BT405
BT404
BT411
BT412
BG423A
Melling Part #
Cloyes Part #
9-5401
9-5402
9-5403
9-5404
9-5409
9-5410
9-5412
9-5413
9-5414
9-5415
9-5416
9-5417
9-5418
9-5419
9-5420
9-5421
9-5422
9-5423
9-5424
9-5425
9-5426
9-5427
9-5428
9-5429
9-5430
9-5431
9-5432
9-5433
9-5434
9-5435
9-5436
9-5437
9-5438
9-5439
9-5440
9-5441
9-5442
9-5444
9-5450
9-5451
9-5452
9-5453
9-5454
9-5455
9-5456
BG424
BG425
BT426A
BT427
BT5409
BT5410
BT5412
BG5413
BG5414
BG5415
BG5416
BD417
BT406
BG410
BG409
BT408A
BT507
BT418
BT419
BT420
BG422
BD421
BG333
BG334
BG413
BG414
BT430
BT429
BG5434
BG5435
BT5436
BT5437
BG5438
BG5439
BG5440
BT5441
BT5442
BT5444
BT5450
BT5451
BT5452
BT506
BT431
BT432
BT433
301
COMPETITOR INTERCHANGE
Cloyes Part #
9-5457
9-5458
9-5459
9-5461
9-5462
9-5463
9-5464
9-5467
9-5475
9-5481
9-5486
9-5489
9-5490
9-5491
9-5496
9-5504
9-5506
9-5510
9-5511
9-5512
9-5513
9-5514
9-5515
9-5516
9-5517
9-5525
9-5530
9-5531
9-5532
9-5533
9-5534
9-5535
9-5536
9-5537
9-5548
9-5549
9-5550
9-5551
9-5552
9-5553
9-5555
9-5556
9-5557
9-5558
9-5559
302
Melling Part #
BG434
BG435
BG391
BG392G
BD393
BD394
BG391G
5467N
BT5406
BT5481
BT209
BT5489
BT5490
BD417
5496B
BG5504
BG5506
BG5510
BT5511
BT5512
BT5513
BT5514
BG5515
BT452
BG449
BT5525
BG5530
BG5531
BG5532
BG5533
BG5534
BT5535
BT5536
BT5537
BG5548
BT5549
BT5550
BG5551
BG5552
BG5553
BT5555
BG5556
BT5557
BG5558
BT5559
Cloyes Part #
9-5560
9-5561
9-5562
9-5563
9-5564
9-5565
9-5566
9-5568
9-5569
9-5570
9-5571
9-5572
9-5573
9-5574
2516S
2523S
2525S
2528S
2538S
2540S
2542S
2544S
2603A
2750AS
2760SA
2764S
2766S
3335S
3336S
3342S
3508S
4710S
8-5100Q
9-0185S
9-0185SA
9-0195S
9-0195SA
9-0195SB
9-0195SC
9-0383S
9-0385S
9-0387S
9-0387SA
9-0387SAX
9-0387SB
Melling Part #
BT5560
BG5561
BT5563
BT5563
BG5564
BT5565
BT5566
BT5568
BT5569
BG5570
BG5571
BG5572
BT5573
BT5574
2516S
2525S
2525S
2528S
2538S
2540S
2542S
2544S
2603A
2750AS
2760SA
2764S
2766S
3335S
3336S
3342S
3508S
4710S
48400Q
3-387SA
3-387SA
3-195S
3-195SA
3-195SB
3-195SC
3-383SB
3-385SC
3-387SA
3-387SA
3-387SAX
3-387SHF
COMPETITOR INTERCHANGE
Cloyes Part #
9-0387SC
9-0387SD
9-0387SE
9-0387SF
9-0387SG
9-0387SGX
9-0387SH
9-0387SHX
9-0387SJ
9-0390S
9-0391S
9-0391SB
9-0391SC
9-0391SD
9-0391SE
9-0391SF
9-0391SG
9-0391SH
9-0392S
9-0393S
9-0393SA
9-0393SB
9-0393SC
9-0393SD
9-0393SX
9-0397S
9-0397SA
9-0397SB
9-0397SBX
9-0397SX
9-0398S
9-0398SA
9-0505S
9-0700S
9-0704S
9-0705S
9-0705SX
9-0708S
9-0708SA
9-0711S
9-0724S
9-0727S
9-0752S
9-0753S
9-0900S
Melling Part #
3-387SHF
3-387SGF
3-387SJF
3-387SKF
3-387SIF
3-387SGX
3-387SG
3-387SC
3-387SG
3-390SA
3-391S
3-391SC
3-391SA
3-391SF
3-391SE
3-391SB
3-391SG
3-391SD
3-392S
3-393S
3-393SA
3-393SD
3-393SB
3-393SC
3-393SX
3-397S
3-397SB
3-397SA
3-397SBX
3-397SX
3-398S
3-398SA
3-505SA
3-700SB
3-704S
3-705S
3-705SX
3-708S
3-708SA
3-711S
3-724S
3-727S
3-752S
3-753S
3-900CS
Cloyes Part #
9-0900SA
9-1100
9-1103
9-1104
9-1108
9-1110
9-1110T
9-1112
9-1113
9-1121
9-1122
9-1125
9-1134
9-1135
9-1138
9-130
9-134
9-135
9-3500TX9
9-3500WX9
9-3510TX9
9-3510WX9
9-3522X9
9-3535X9
9-3658TX9
9-4007S
9-4007SA
9-4023S
9-4054S
9-4057S
9-4058S
9-4076S
9-4131S
9-4131SA
9-4133SA
9-4134S
9-4134SA
9-4134SB
9-4136S
9-4141S
9-4145S
9-4145SA
9-4147S
9-4148S
9-4148SHD
Melling Part #
3-900CSA
40400
40406
40407
40410
40401
40510
40408
40409
40405
40403
40217
40404
40402
40402
163
168
160
48500T-9
48500W-9
48510T-9
48510W-9
48530T-9
48520T-9
48560T-9
3SR94-1
3SR94-2
3-3SR64S
3DR54-1
3DR60-1
3DR62-1
3DR98-1
3DR102-1
3DR102-2
3DR106-3
3DR110-1
3DR110-2
3DR110-3
3DR114-1
3SR98-1
8MMSR90-1
3-102S
3DR106D-1
3SR96-1
3SR96-1HD
303
COMPETITOR INTERCHANGE
Cloyes Part #
9-4151S
9-4163S
9-4164S
9-4164SA
9-4167S
9-4172S
9-4172SA
9-4174S
9-4177S
9-4180S
9-4180SA
9-4186S
9-4186SX
9-4188S
9-4189S
9-4196S
9-4200SA
9-4201S
9-4201SX
9-4202S
9-4207S
9-4207SX
9-4212S
9-4214SA
9-5133HD
B012
B013
B014
B017
B018
B020
B032
B036
B037
B041
B043
B061
B067
B070
B071
B073
B074
B076
B077
B081
304
Melling Part #
3-3SR60AS
3SR102-1
3SR92-1
3-3SR92
3-4167S
3-3SRH64S
3-3SRH64AS
3-191S
3-3SRH124S
3-3DRH48
3-4210SA
3-8MMSRH62SA
3-8MMSRH62S
BSEK122
3-192S
3-3SRH106
3-4200SA
3-4201S
3-4201SX
3-4202S
3-4207S
3-4207SX
3-4212S
3-4214SA
BD102HD
B-012
B-013
B-014
B-017
B-018
B-020
B-032
B-036
B-037
B-041
B-043
B-061
B-067
B-070
B-071
B-073
B-074
B-076
B-077
B-081
Melling Part #
Cloyes Part #
B087
B088
B089
B090
B091
B092
B093
B094
B095
B099
B100
B101
B104
B111
B112
B113
B114
B117
B118
B122
B123
B124
B125
B126
B127
B128
B129
B130
B131
B132
B134
B135
B136
B137
B139
B140
B141
B142
B143
B145
B146
B147
B148
B150
B151
B-087
B-088
B-089
B-090
B-091
B-092
B-093
B-094
B-095
B-099
B-0100
B-0101
B-0104
B-0111
B-0112
B-0113
B-0114
B-0117
B-0118
B-0122
B-0123
B-0124
B-0125
B-0126
B-0127
B-0128
B-0129
B-0130
B-0131
B-0132
B-0134
B-0135
B-0136
B-0137
B-0139
B-0140
B-0141
B-0142
B-0143
B-0145
B-0146
B-0147
B-0148
B-0150
B-0151
COMPETITOR INTERCHANGE
Cloyes Part #
B153
B154
B157
B158
B160
B161
B162
B163
B164
B165
B166
B167
B168
B170
B171
B172
B173
B174
B176
B177
B178
B179
B180
B181
B182
B183
B184
B185
B186
B187
B190
B191
B192
B193
B194
B195
B198
B199
B200
B201
B203
B204
B206
B208
B210
Melling Part #
B-0153
B-0154
B-0157
B-0158
B-0160
B-0161
B-0162
B-0163
B-0164
B-0165
B-0166
B-0167
B-0168
B-0170
B-0171
B-0172
B-0173
B-0174
B-0176
B-0177
B-0178
B-0179
B-0180
B-0181
B-0182
B-0183
B-0184
B-0185
B-0186
B-0187
B-0190
B-0191
B-0192
B-0193
B-0194
B-0195
B-0198
B-0199
B-0200
B-0201
B-0203
B-0204
B-0206
B-0208
B-0210
Melling Part #
Cloyes Part #
B212
B214
B215
B216
B217
B219
B220
B221
B223
B224
B226
B227
B228
B229
B230
B232
B233
B234
B235
B236
B237
B239
B240
B241
B244
B245
B246
B247
B248
B249
B251
B252
B253
B254
B255
B256
B257
B258
B259
B262
B263
B265
B266
B271
B272
B-0212
B-0214
B-0215
B-0216
B-0217
B-0219
B-0220
B-0221
B-0223
B-0224
B-0226
B-0227
B-0228
B-0229
B-0230
B-0232
B-0233
B-0234
B-0235
B-0236
B-0237
B-0239
B-0240
B-0241
B-0244
B-0245
B-0246
B-0247
B-0248
B-0249
B-0251
B-0252
B-0253
B-0254
B-0255
B-0256
B-0257
B-0258
B-0259
B-0262
B-0263
B-0265
B-0266
B-0271
B-0272
305
COMPETITOR INTERCHANGE
Cloyes Part #
B273
B276
B277
B279
B280
B281
B282
B283
B285
B286
B287
B288
B289
B294
B295
B296
B297
B298
B299
B300
B301
B302
B303
B304
B305
B306
B307
B308
B309
B311
B312
B313
B314
B315
B318
B320
B323
B329
B330
B331
B332
B333
B334
C160
C161
306
Melling Part #
B-0273
B-0276
B-0277
B-0279
B-0280
B-0281
B-0282
B-0283
B-0285
B-0286
B-0287
B-0288
B-0289
B-0294
B-0295
B-0296
B-0297
B-0298
B-0299
B-0300
B-0301
B-0302
B-0303
B-0304
B-0305
B-0306
B-307
B-0308
B-0309
B-0311
B-0312
B-0313
B-0314
B-0315
B-0318
B-0320
B-0323
B-0329
B-0330
B-0331
B-0332
B-0333
B-0334
160
161
Cloyes Part #
C162
C163
C166
C168
C169
C172
C180
C181
C185
C189
C193A
C194
C195
C300
C-3001K
C-3002K
C-3003K
C-3004K
C-3005K
C-3006K
C-3007K
C-3008K
C-3009K
C-3010K
C-3011K
C-3012K
C-3013K
C-3014K
C-3015
C-3017
C-3018K
C-3019
C-3021K
C-3022K
C-3023K
C-3023X
C-3023XSP
C-3024K
C-3024X
C-3025
C-3026K
C-3027K
C-3028
C-3028X
C-3029
Melling Part #
162
163
166
168
169
172
180
181
185
189
193
194
195
300
3-499S
3-361S
3-359S
3-358SA
3-494SB
3-498SC
3-350S
3-349S
3-498SB
3-501SA
3-501S
3-494SA
3-491S
3-358S
3-366S
3-506SE
3-359SB
3-395S
3-494SC
3-495S
3-163S
40201
40201
3-171S
40205
3-489S
3-351S
3-365S
3-160S
40202
3-169S
COMPETITOR INTERCHANGE
Cloyes Part #
C-3029X
C-3030
C-3031
C-3032
C-3034K
C-3035
C-3036
C-3037
C-3038
C-3039
C-3041
C-3043
C-3044
C-3045
C-3046
C-3047K
C-3048K
C-3049K
C-3051K
C-3052
C-3053
C-3054X
C-3055
C-3056K
C-3057K
C-3058K
C-3059K
C-3061
C-3062
C-3064K
C-3065
C-3066
C-3067K
C-3068
C-3069
C-3070
C-3071
C-3072
C-3073
C-3074
C-3075
C-3076
C-3077
C-3078
C-3079
Melling Part #
40204
3-169SA
3-344S
3-356S
3-498S
3-494S
3-385S
3-491SA
3-382S
3-509SA
3-385SA
3-350S
3-168SA
3-168S
3-374SA
3-370S
3-372S
3-503S
3-365SA
3-505S
3-494S
40206
3-202S
3-506SB
3-163SB
3-359SC
3-499SA
3-374S
3-3SR64
3-506SC
3-163SA
3-378S
3-373S
3-168SC
3-377S
3-375S
3-375SA
3-380S
3-378SA
3-181S
3-3SR60
3-3DR130
3-388S
3-3SRH64
3-168SD
Cloyes Part #
C-3082
C-3083
C-3085
C-3086K
C-3087
C-3088
C-3089
C-3090
C-3092
C-3097
C-3098
C-3201
C-3202K
C-3204
C-3205
C-3206
C-3207
C-3208
C-3209
C-3210
C-3212
C-3213
C-3214
C-3215
C-3216
C-3217
C-3218
C-3219
C-3220
C-3221
C-3222
C-3225
C-3227
C-3228
C-3233
C-3235
C344
C348
C349
C350
C351
C356
C358
C359
C361
Melling Part #
3-494SD
3-498SA
3-4SR48
3-376S
3-503SB
3-383S
3-384S
3-509S
3-202SA
3-181SA
3-3SRH64A
3-4SR50
3-507S
3-390S
3-377SA
3-700SA
3-168SE
3-3SR92A
3-192SA
3-3SRH60SA
3-8MMSRH72S
3-4SR50SA
3-381AS
3-381ASB
3-4SR50SE
3-4SR50SB
3-396S
3-4SR50SC
3-3SRH60SA
3-700S
3-4SR50SD
3-385SB
3-3SRH60S
3-509SB
3-8MMSRH72SA
3-3235S
344
348
349
350
351
356
358
359
361
307
COMPETITOR INTERCHANGE
Cloyes Part #
C365
C366
C370
C373
C374
C375
C376
C377
C378
C380
C381
C381A
C382
C383
C384
C385
C387
C388
C390
C391
C392
C393
C394
C396
C397
C489
C493
C494
C495
C498
C499
C501
C503
C504
C505
C507
C700
C704
C705F
C706F
C708F
C711F
C712F
C719F
C721F
308
Melling Part #
365
366
370
373
374
375
376
377
378
380
375
381A
382
383M
384
385
387
388
390
391
392
393
394
396
397
505
491
494
495
498
499
501
503
494
505
507
700
704
705
706F
708
711F
712F
719
721
Cloyes Part #
C727F
C728F
C753
C754
C900
C901
P9115
S246
S249
S250
S255
S256
S261T
S262
S270
S273
S274
S276
S278
S281
S283
S284
S288
S289
S291
S297
S299
S308
S311
S321
S323
S326
S327
S331
S334T
S339
S348T
S349
S353
S355
S358T
S359
S360T
S361
S363
Melling Part #
727F
728F
753
754
900C
901C
MPC-393
S246
S249
S250
S255
S256
S261
S262
S270
S273
S274
S276
S278
S281
S283
S284
S288
S289
S291
S297
S299
S308
S311
S321
S323
S326
S327
S331
S334
S339
S348
S349
S353
S355
S358
S359
S360
S361
S363
COMPETITOR INTERCHANGE
Cloyes Part #
S365
S366T
S367
S369
S370T
S375
S377
S380
S388T
S390T
S391
S392T
S393
S394
S395
S396T
S397
S398T
S400
S401
S402
S404T
S405
S406T
S407
S410
S412T
S417
S419
S420T
S423
S430T
S431
S438
S445
S446
S447
S448T
S449
S450
S451
S453
S455
S456
S459
Melling Part #
S365
S366
S367
S369
S370
S375
S377
S380
S388
S390
S391
S392
S393
S394
S395
S396
S397
S398
S400
S401
S402
S404
S405
S406
S407
S410
S412
S417
S419
S420
S423
S430
S431
S438
S445
S446
S447
S448
S449
S450
S451
S453
S455
S456
S459
Melling Part #
Cloyes Part #
S461
S462
S463
S468
S471
S475
S479
S491
S493
S494
S495
S500
S501
S502T
S505
S506T
S508
S511
S512T
S515
S523
S524
S527
S531
S533
S539
S542T
S543
S545
S546T
S549
S551
S557
S558T
S559
S560
S567
S577
S581
S591
S593
S598
S600
S607
S608T
S461
S462
S463
S468
S471
S475
S479
S491
S493
S494
S495
S500
S501
S502
S505
S506
S508
S511
S512
S515
S523
S524
S527
S531
S533
S539
S542
S543
S545
S546
S549
S551
S557
S558
S559
S560
S567
S577
S581
S591
S593
S598
S600
S607
S608
309
COMPETITOR INTERCHANGE
Cloyes Part #
S609
S610T
S611
S612
S616
S617
S618T
S619
S620T
S621
S622
S626
S631
S633
S634T
S636T
S638
S640
S641
S642
S645
S649
S650
S651
S653
S658
S670
S675
S684T
S685
S686
S688T
S689
S690T
S691
S692T
S693
S694
S695
S698
S699
S700T
S701
S706T
S710
310
Melling Part #
S609
S610
S611
S612
S616
S617
S618
S619
S620
S621
S622
S626
S631
S633
S634
S636
S638
S640
S641
S642
S645
S649
S650
S651
S653
S658
S670
S675
S684
S685
S686
S688
S689
S690
S691
S692
S693
S694
S695
S698
S699
S700
S701
S706
S710
Melling Part #
Cloyes Part #
S712T
S713
S715
S716T
S717
S718T
S719
S720
S721
S724
S726T
S729
S731
S732T
S734T
S736T
S737
S740T
S742T
S747
S749
S751
S754
S756T
S758T
S760T
S762T
S764T
S766T
S768T
S770T
S771
S772T
S773
S774T
S776T
S778
S780T
S784T
S786T
S788T
S790
S790A
S791
S795
S712
S713
S715
S716
S717
S718
S719
S720
S721
S724
S726
S729
S731
S732
S734
S736
S737
S740
S742
S747
S749
S751
S754
S756
S758
S760
S762
S764
S766
S768
S770
S771
S772
S773
S774
S776
S778
S780
S784
S786
S788
S790
S790P
S791
S795
COMPETITOR INTERCHANGE
Cloyes Part #
S797
S804T
S805
S806T
S807
S808T
S809
S810T
S811
S812T
S814T
S815
S817
S818T
S819
S821
S822T
S824
S826T
S827
S830T
S831
S832
S833
S834T
S835
S836T
S837
S839
S840
S842T
S843
S846
S847
S848T
S849
S850T
S851
S852
S853
S854
S856T
S859
S860
S861
Melling Part #
S797
S804T
S805
S806
S807
S808
S809
S810
S811
S812
S814
S815
S817
S818
S819
S821
S822
S824
S826
S827
S830
S831
S832
S833
S834
S835
S836
S837
S839
S840
S842
S843
S846
S847
S848
S849
S850
S851
S852
S853
S854
S856
S859
S860
S861
Melling Part #
Cloyes Part #
S862
S863
S865
S868
S869
S870
S878T
S884
S885
S886
S888
S889
S891
S892T
S893
S894T
S896T
S898T
S908
S911
S913
S921
S926
S927
S928T
S929
S930
S931
S932
S933
S934T
S937
S939
S940
S862
S863
S865
S868
S869
S870
S878
S884
S885
S886
S888
S889
S891
S892
S893
S894
S896
S898
S908A
S911
S913
S921
S926
S927
S928
S929
S930
S931
S932
S933
S934
S937
S939
S940
Melling Part #
S.A. Gear Part #
2500
2501
2514
2524
2527
2534
2535
2537
2542
2500
2501
2514
2524
2527
2534
2535
2537
2542
311
COMPETITOR INTERCHANGE
Melling Part #
S.A. Gear Part #
2701
2702
2900
2901
3321
3334
3341
3342
4706
7022
7023
7025
7026
7030
7031
7034
7040
7043
7045
7048
7049
7050
7051
7054
7055
7059
7062
7064
7071
7077
7080
7081
7083
7085
7087
7088
7101
7102
7121
7122
7123
7132
7133
7158
7159
312
2701
2702
2900
2901
3321
3334
3341
3342
4706
BD22
BD23
BD25
BD26
BD30
BD31
BD34
BD40
BD43
BD45
BG48
BT49
BG95
BG51
BG127
BG55
BD59
BD34
BG64
BD71
BG77
BG80
BD81
BD83
BG85
BG87
BG88
BD101
BD102
BG127
BG128
BD27
BD132
BD102
BD44
CB200
S.A. Gear Part #
7169
7170
7171
7172
7173
7175
7181
7186
7187
7189
7190
7200
7201
7205
7206
7207
7209
7214
7215
7216
7222
7223
7227
7231
7232
7233
7234
7237
7238
7239
7240
7243
7244
7246
7248
7251
7254
7255
7256
7257
7259
7261
7275
7281
7283
Melling Part #
BG169
BG170
BG171
BG172
BG173
BD58
BG181
BT143
BG187
CB100
CB300
BG200
BG5435
BT205
BT206
BT207
BT209
BT214
BT215
BT216
BT5222
BT5223
BT227
BG231
BG232
BG233
BG234
BG237
BG238
BG239
BG240
BT5243
BT5244
BG246
BG248
BG5251
BG5254
BG5255
BG5256
BG5257
BT5259
BG261
AP275
BT5281
BT5283
COMPETITOR INTERCHANGE
S.A. Gear Part #
7295
7297
7300
7302
7304
7305
7306
7307
7309
7310
7311
7312
7315
7316
7319
7320
7321
7322
7328
7329
7330
7331
7332
7336
7337
7344
7346
7360
7361
7362
7363
7364
7365
7366
7367
7368
7375
7381
7382
7384
7385
7386
7387
7388
7391
Melling Part #
BD295
BG297
BT5300
BT111
BG304
BG305
BG306
BG307
BG309
BG310
BD311
BD312
BG315
BG316
BG319
BG320
BD321
BD322
BG328
BG329
BG330
BG331
BG332
BD336
BG337
BD344
BG180
BG360
BD361
BD362
BD363
BD364
BG365
BG366
BG367
BG368
BG5375
BG5381
BG5382
BG5384
BG5385
BG5386
BG333
BG334
BG391
S.A. Gear Part #
7393
7394
7409
7410
7411
7412
7413
7414
7415
7416
7422
7423
7424
7425
7434
7435
7438
7439
7440
7449
7451
7504
7506
7508
7518
7613
7614
7615
7616
7634
7635
7636
7688
9001
9007
9008
9010
9014
9016
9017
9018
9019
9021
9032
9033
Melling Part #
BD393
BD394
BG409
BG410
BG5551
BG5552
BG413
BG414
BG415
BG416
BG422
BG423A
BG424
BG425
BG434
BG435
BG5438
BG5439
BG5440
BG449
BG5515
BG5504
BG5506
BG6006
BG5570
BG5413
BG5414
BG5415
BG5416
BG5434
BG391G
BG392G
BD600
BT01
BT07
BT08
BT10
BT63
BT16
BT17
BT18
BT21
BT21
BD32
BD33
313
COMPETITOR INTERCHANGE
S.A. Gear Part #
9038
9046
9061
9063
9066
9075
9076
9089
9090
9091
9096
9100
9103
9104
9105
9106
9109
9114
9115
9118
9124
9126
9127
9134
9148
9154
9155
9157
9160
9161
9162
9163
9164
9165
9166
9167
9168
9176
9179
9182
9188
9191
9192
9194
9195
314
Melling Part #
BD38
BT46
BT61
BT63
BT66
BT75
BT76
BT89
BT93
BT91
BT96
BT100
BT103
BT104
BT105
BT106
BT117
BT92
BT5115
BT124
BT120
BT116
BT127
BT134
BT148
BT140
BT141
BT157
BT160
BT161
BT162
BT113
BT164
BT117
BT166
BT167
BT168
BT176
BT179
BT139
BT188
BT94
BT192
BT194
BT195
S.A. Gear Part #
9196
9197
9198
9199
9202
9203
9213
9220
9225
9229
9230
9235
9236
9245
9247
9260
9262
9263
9268
9271
9280
9292
9293
9298
9299
9301
9308
9313
9314
9321
9322
9323
9324
9325
9326
9327
9338
9339
9340
9341
9342
9345
9350
9354
9355
Melling Part #
BT196
BT197
BT198
BT199
BT202
BT203
BT213
BT220
BT225
BT229
BT230
BT235
BT236
BT245
BG247
BT260
BT5262
BT263
BT5268
BT271
BT5280
BT5292
BT293
BT298
BT5299
BT301
BT308
BT313
BT314
BD321
BD322
BT323
BT324
BT325
BT128
BT327
BT402
BT403
BD322
BD321
BT342
BT345
BT350
BT326
BT355
COMPETITOR INTERCHANGE
S.A. Gear Part #
9356
9357
9358
9359
9371
9372
9374
9383
9404
9405
9406
9408
9410
9411
9412
9413
9414
9417
9418
9419
9420
9422
9426
9427
9428
9431
9432
9433
9436
9437
9441
9442
9444
9448
9450
9453
9454
9467
9475
9489
9496
9509
9510
9511
9512
Melling Part #
BT356
BT357
BT358
BT359
BT402
BT403
BT5481
BT5383
BT404
BT405
BT406
BT408A
BT5410
BT411
BT412
BT5550
BT5549
BT417
BT418
BT419
BT420
BT507
BT426A
BT427
BT428
BT431
BT432
BT433
BT5436
BT5437
BT5441
BT5442
BT5444
BT5448
BT5450
BT506
BT5514
5467N
BT5406
BT6003
5496B
BT5489
BG5510
BT5511
BT5512
S.A. Gear Part #
9517
9532
9533
9550
9552
9612
9617
9627
9636
71003
71004
71011
71012
71028
71029
71030
71031
71037
71040
71041
71045
71046
71050
71051
73001
73002
73003
73004
73005
73006
73007
73008
73009
73010
73011
73012
73013
73014
73015
73017
73018
73019
73020
73021
73022
Melling Part #
BT5569
BT430
BT429
BT5513
BT5452
BT5412
BD417
BD421
BT5121
BT5566
BG5564
BD6005
BT5555
BG6007
BG5530
BG5532
BG5531
BG5572
BG5556
BG5548
BG6004
BG6003
BG5571
BG5553
3-499S
3-361S
3-359S
3-358SA
3-494SB
3-498SC
3-350S
3-349S
3-498SB
3-501SA
3-501S
3-494SA
3-491S
3-358S
3-366S
3-163S
3-351S
3-359SB
3-489S
3-494SC
3-495S
315
COMPETITOR INTERCHANGE
S.A. Gear Part #
73024
73026
73027
73028
73029
73033
73034
73035
73036
73037
73038
73039
73041
73043
73044
73045
73046
73047
73048
73053
73054
73055
73059
73060
73061
73062
73063
73064
73066
73067
73068
73069
73070
73071
73072
73075
73076
73077
73078
73079
73081
73082
73084
73085
73087
316
Melling Part #
3-160S
3-168SC
3-168SA
3-169SA
3-169S
3-374SA
3-498S
3-494S
3-171S
3-491SA
3-344S
3-356S
3-365S
3-163SA
3-365SA
3-498SA
3-499SA
3-370S
3-505S
3-3SR64
3-163SB
3-494SD
3-499S
3-503S
3-372S
3-168S
3-359SC
3-499SA
3-374S
3-3SR60
3-3DR130
3-202S
3-506SB
3-376S
3-507S
3-373S
3-377S
3-378S
3-503SB
3-4SR48
3-202SA
3-181S
3-168SD
3-375S
3-3SRH64
S.A. Gear Part #
73088
73089
73090
73093
73097
73098
73099
73112
73113
73114
73115
73116
73117
73118
73120
73121
73123
73124
73125
73126
73127
73128
73129
73131
73133
73134
73135
73136
73137
73138
73139
73158
73159
73160
73162
73163
73164
73175
73178
73184
76001
76003
76005
76006
76007
Melling Part #
3-375SA
3-380S
3-378SA
3-506SC
3-383S
3-377SA
3-4SR50
3-509S
3-384S
3-181SA
3-3SRH64A
3-385S
3-388S
3-168SE
3-700SA
3-3SR92A
3-506SE
3-370SA
3-506SD
3-509SB
3-381AS
3-509SA
3-390S
3-381ASB
3-3SRH60SA
3-700S
3-8MMSRH72S
3-4SR50SE
3-4SR50SA
3-396S
3-382S
3-4SR50SB
3-4SR50SC
3-192SA
3-3SRH60SA
3-4SR50SD
3-3SRH60S
3-499S
3-3235S
3-8MMSRH72SA
3DR102-1
3DR60-1
3DR98-1
3DR62-1
3SR94-1
COMPETITOR INTERCHANGE
S.A. Gear Part #
76008
76009
76010
76011
76012
76024
76026
76027
76031
76032
76033
76036
76037
76043
76046
76051
76052
76054
76055
76056
76057
76058
76068
76069
76070
76071
76072
76073
76074
76078
76079
76083
76085
76087
76089
76090
76093
76100
76101
76103
76105
76106
76107
76108
76110
Melling Part #
3DR110-1
3DR114-1
3DR110-2
3DR110-3
3DR54-1
3-102S
3SR98-1
3SR96-1
3DR106D-1
3DR102-2
8MMSR90-1
3SR92-1
3SR102-1
3SR94-2
BSEK122
3-3DRH48
3-3SRH124S
3DR106-2
3-3SR60AS
3-3SRH64S
3-387SA
3-387SA
3-3SRH64AS
3-505SA
3-3SR64S
3-192S
3-3SR92
3-387SA
3-383SB
3-391S
3-391SB
3-393S
3-3SRH106
3-392S
3-387SA
3-390SA
3-4202S
3-391SA
3-393SA
3-395S
3-387SG
3-393SD
3-3DRH48
3-8MMSRH62SA
3-393SC
S.A. Gear Part #
76112
76114
76115
76116
76118
76119
76123
76129
76130
76131
76132
76135
76137
76138
76139
76140
76141
76143
76144
76146
76147
76148
76149
76150
76153
76154
76155
76156
76158
76159
76168
76169
76171
76172
76180
76184
76186
76190
76191
76192
76193
76195
76210
76218
76219
Melling Part #
3-391SC
3-387SIF
3-391SG
3-380S
3-391SF
3-391SE
3-387SG
3-387SHF
3-387SGF
3-387SJF
3-387SKF
3-398S
3-398SA
3-4207S
3-385SB
3-704S
3-397SA
3-4167S
3-393SB
3-387SHF
3-387SHF
3-387SGF
3-387SJF
3-387SKF
3-4212S
3-4210SA
3-705S
3-705S
3-0250S
3-1007S
3-387SGX
3-387SIF
3-724S
3-708S
3-4214SA
3-4214SA
3-752S
3-195SB
3-195S
3-385SC
3-700SB
3-4200SA
3-753S
3-0470S
3-0719S
317
COMPETITOR INTERCHANGE
S.A. Gear Part #
76221
76224
76225
76235
76236
78100
78103
78104
78108
78110
78111
78112
78113
78120
78121
78125
78129
78130
78151
78204
78208
78210
78212
78225
78300
78337
78400
78410
78420
78430
78450
91001
91022
91023
91024
91028
91029
91030
91031
91032
91040
91043
91049
2516S
2525S
318
Melling Part #
3-727S
3-385SA
3-391S
3-708SA
3-4212SA
40400
40406
40407
40410
40401
40402
40408
40409
40402
40405
40407
40404
40403
40402
40203
40204
40205
40212
40217
40500
40510
48400
48410
48420
48430
48450
BT5565
BT6001
BT6002
BT6000
BG5533
BG5534
BT5537
BT5536
BT5535
BT5574
BT5573
BT5490
2516S
2525S
S.A. Gear Part #
2528S
2538S
2540S
2542S
2544S
2727S
2750AS
2760SA
2764S
2766S
2SR-60
3329A
3336S
3342S
3DR-102
3DR-106
3DR-110
3DR-112D
3DR-114
3DR-114A
3DR-130
3DR-54
3DR-54A
3DR-54B
3DR-58
3DR-60
3DR-62
3DR-84
3DR-90
3DR-94
3DR-98
3SR-102
3SR-44
3SR-58
3SR-60
3SR-62
3SR-64
3SR-94
3SR-96
3SR-98
3SRH-138T
3SRH-44T
3SRH-60
4710S
4SR-48
Melling Part #
2528S
2538S
2540S
2542S
2544S
2727S
2750AS
2760SA
2764S
2766S
201
3329A
3336S
3342S
3DR102
3DR106
3DR110
3DR112D
3DR114
3DR114
3DR130
3DR54
3DR-54
3DR54
3DR58
3DR60
3DR62
3DR84
3DR90
3DR94
3DR98
3SR102
3SR44
3SR58
3SR60
3SR62
3SR64
3SR94
3SR96
3SR98
4207C
4208C
3SRH60
4710S
4SR48
COMPETITOR INTERCHANGE
S.A. Gear Part #
4SR-50
7133S
73004-3
73004N
73014-3
73014-3C
73017-3
73017-3C
73017-3S
73017-3SC
73024-3
73024-3C
73036-3
73063N
7387B
76027S
76053A
76081A
76081AS
76082A
76082AS
76083S
76086S
76089S
76105S
76108S
76114S
76138S
76141S
76155S
78100C
78103C
78104C
78108C
78110C
78112C
78113C
78120C
78121C
78129C
78130C
78204C
78208C
78210C
78225C
Melling Part #
4SR50
BD102HD
40206
3-358SAN
40206
40206
40201
40201
40201
40201
40202
40202
40205
3-359SCN
BG333
3SR96-1HD
3-191S
3-397S
3-397SX
3-397SB
3-397SX
3-393SX
3-387SC
3-387SAX
3-387SC
3-8MMSRH62S
3-387SGX
3-4207SX
3-397SBX
3-705SX
40400
40406
40407
40410
40401
40408
40409
40402
40405
40404
40403
40203
40204
40205
40217
S.A. Gear Part #
78300C
78337C
78400Q
78410Q
78500T-9
78500W-9
78510T-9
78510W-9
78520T-9
78520W-9
78530T-9
78533T-9
78551T-9
8MMSR54
8MMSR60
8MMSR70
8MMSR84
8MMSR90
8MMSRH82
9452C
C1000
C1001
C1007
C1009
C1010
C1015
C-160
C-161
C-162
C-163
C-166
C-168
C-169
C-172
C-181
C-185
C-189
C-193
C-194
C-195
C-202
C-3000
C-339
C-348
C-349
Melling Part #
40500
40510
48400Q
48410Q
48500T-9
48500W-9
48510T-9
48510W-9
48520T-9
48520W-9
48530T-9
48561T-9
48551T-9
8MMSR54
8MMSR60
8MMSR70
8MMSR84
8MMSR90
8MMSRH82
BT452
727F
3DRH48
1007
754
753
719
160
161
162
163
166
168
169
172
181
185
189
193
194
195
202
300
339
348
349
319
COMPETITOR INTERCHANGE
Melling Part #
S.A. Gear Part #
C-350
C-351
C-354
C-356
C-357
C-358
C-359
C-361
C-365
C-366
C-369
C-370
C-372
C-373
C-374
C-375
C-376
C-377
C-378
C-380
C-381
C-381A
C-382
C-383
C-384
C-385
C-387
C-387F
C-388
C-390
C-391
C-392
C-393
C-394
C-395
C-396
C-397F
C-491
C-494
C-495
C-498
C-499
C-501
C-503
C-505
320
350
351
344
356
357
358
359
361
365
366
374
395
385
373
374
375
376
377
378
380
375
381A
382
383
384
385
387
387
388
390
391
392
393
394
395
396
397
491
494
495
498
499
501
503
505
S.A. Gear Part #
C-506
C-507
C-509
C-700
C-704F
C-705F
C-706F
C-708F
C-711F
C-712F
C-727F
C-728F
RC-1005
RC-1006
RC-1007
RC-1008
RC-1009
RC-1010
RC-1011
RC-1012
RC-1019
RC-1020
RC-1021
RC-1022
RC-1023
RC-1025
RC-1029
RC-1030
RC-1035
RC-1043
RC-1044
S1203
S1204
S1221
S1223
S1225
S1227
S1229
S1232
S1237
S1240
S1242
S1248
S-127
S-246
Melling Part #
499
507
499
700
704
705
706F
708
711F
712F
727F
728F
3SR94
190
191
3DRH48
3SRH124
4178C
4179C
3SRH92
8MMSRH126
8MMSRH62
192
3SR92
3SRH106
8MMSRH72
4201F
4202F
4214C
721
1044
S927
S934
S1221
S921
S1225
S1227
S1229
S1232
S937
S930
S932
S940
S127
S246
COMPETITOR INTERCHANGE
Melling Part #
S.A. Gear Part #
S-249
S-250
S-255
S-256
S-261T
S-262
S-264
S-265
S-266
S-270
S-273
S-274
S-276
S-281
S-283
S-284
S-288
S-289
S-291
S-297
S-299
S-308
S-311
S-321
S-323
S-326
S-327
S-328
S-331
S-332T
S-334T
S-339
S-340
S-344T
S-348T
S-349
S-353
S-355
S-358T
S-359
S-360T
S-361
S-365
S-366T
S-367
S249
S250
S255
S256
S261
S262
S264
S265
S266
S270
S273
S274
S276
S281
S283
S284
S288
S289
S291
S297
S299
S308
S311
S321
S323
S326
S327
S328
S331
S332
S334
S339
S340
S344
S348
S349
S353
S355
S358
S359
S360
S361
S365
S366
S367
Melling Part #
S.A. Gear Part #
S-369
S-370T
S-375
S-377
S-380
S-388T
S-390N
S-390T
S-391
S-392T
S-393
S-394
S-395
S-396T
S-397
S-398T
S-400
S-401
S-402
S-403
S-404T
S-405
S-406T
S-407
S-410
S-417
S-419
S-420T
S-423
S-424
S-430T
S-431
S-436N
S-438
S-445
S-446
S-447
S-448T
S-450
S-453
S-455
S-456
S-457
S-459
S-461
S369
S370
S375
S377
S380
S388
S390
S390
S391
S392
S393
S394
S395
S396
S397
S398
S400
S401
S402
S403
S404
S405
S406
S407
S410
S417
S419
S420
S423
S-424
S430
S431
S436N
S438
S445
S446
S447
S448
S450
S453
S455
S456
S457
S459
S461
321
COMPETITOR INTERCHANGE
Melling Part #
S.A. Gear Part #
S-462
S-463
S-468
S-471MX
S-475
S-479
S-490
S-491
S-493
S-500
S-501
S-502
S-505
S-506
S-507
S-508
S-511
S-512
S-515
S-521
S-524
S-527
S-531
S-533
S-539
S-540
S-542
S-543
S-545
S-546T
S-549
S-551
S-557
S-558
S-559
S-560
S-567
S-572
S-577
S-581
S-591
S-593
S-598
S-600
S-607
322
S462
S463
S468
S471
S475
S479
S490
S491
S493
S500
S501
S502
S505
S506
S507
S508
S511
S512
S515
S521
S524
S527
S531
S533
S539
S540
S542
S543
S545
S546
S549
S551
S557
S558
S559
S560
S567
S572
S577
S581
S591
S593
S598
S600
S607
Melling Part #
S.A. Gear Part #
S-608
S-609
S-610N
S-610T
S-611
S-612
S-616
S-617
S-618
S-619
S-620
S-621
S-622
S-626
S-631
S-633
S-634
S-636
S-638
S-640
S-641
S-642
S-645
S-649
S-650
S-651
S-653
S-658
S-669
S-670
S-674
S-675
S-677
S-685
S-686
S-688
S-689
S-690
S-691
S-692
S-693
S-694
S-695
S-696
S-698
S608
S609
S610
S610
S611
S612
S616
S617
S618
S619
S620
S621
S622
S626
S631
S633
S634
S636
S638
S640
S641
S642
S645
S649
S650
S651
S653
S658
S669
S670
S674
S675
S677
S685
S686
S688
S689
S690
S691
S692
S693
S694
S695
S696
S698
COMPETITOR INTERCHANGE
Melling Part #
S.A. Gear Part #
S-700
S-701
S-703
S-706
S-709
S-710
S-712
S-713
S-714
S-715
S-716
S-717
S-718
S-719
S-720
S-721
S-724
S-726
S-729
S-731
S-732T
S-734
S-735
S-736
S-737
S-740
S-742
S-747
S-749
S-751
S-754
S-756
S-758
S-760
S-762
S-764
S-766
S-768
S-770
S-771
S-772
S-773
S-774
S-776
S-778
S700
S701
S703
S706
S709
S710
S712
S713
S714
S715
S716
S717
S718
S719
S720
S721
S724
S726
S729
S731
S732
S734
S699
S736
S737
S740
S742
S747
S749
S751
S754
S756
S758
S760
S762
S764
S766
S768
S770
S771
S772
S773
S774
S776
S778
S.A. Gear Part #
S-780
S-784
S-786
S-788
S-790
S-790P
S-791
S-795
S-797
S-802S
S-803S
S-804
S-805
S-806
S-807
S-808
S-809
S-810
S-811
S-812
S-813
S-814
S-815
S-816
S-817
S-818
S-819
S-821
S-822
S-824
S-827
S-830
S-831
S-832
S-833
S-834
S-835
S-836
S-837
S-839
S-840
S-841
S-842
S-843
S-846
Melling Part #
S780
S784
S786
S788
S790
S790P
S791
S795
S797
S802SP
S803SP
S804T
S805
S806
S807
S808
S809
S810
S811
S812
S813
S814
S815
S816
S817
S818
S819
S821
S822
S824
S827
S830
S831
S832
S833
S834
S835
S836
S837
S839
S840
S841
S842
S843
S846
323
COMPETITOR INTERCHANGE
S.A. Gear Part #
S-847
S-848
S-849
S-850
S-851
S-852
S-853
S-854
S-855
S-856
S-859
S-860
S-861
S-862
S-863
S-865
S-868
S-869
S-870
S-878
S-883
S-884
S-885
S-886
S-888
S-889
S-891
S-892
S-893
S-894
S-896T
S-898T
S-908
S-913
S-918T
S-928T
TB-012
TB-013
TB-014
TB-017
TB-032
TB-036
TB-037
TB-041
TB-043
324
Melling Part #
S847
S848
S849
S850
S851
S852
S853
S854
S855
S856
S859
S860
S861
S862
S863
S865
S868
S869
S870
S878
S929
S884
S885
S886
S888
S889
S891
S892
S893
S894
S896
S898
S-908A
S-913
S939
S928
B-012
B-013
B-014
B-017
B-032
B-036
B-037
B-041
B-043
S.A. Gear Part #
TB-061
TB-067
TB-070
TB-071
TB-073
TB-074
TB-077
TB-078
TB-081
TB-086
TB-087
TB-089
TB-090
TB-091
TB-092
TB-093
TB-094
TB-095
TB-100
TB-101
TB-103
TB-104
TB-106
TB-111
TB-112
TB-113
TB-114
TB-117
TB-118
TB-121
TB-122
TB-123
TB-124
TB-125
TB-126
TB-127
TB-128
TB-129
TB-131
TB-132
TB-133
TB-134
TB-135
TB-136
TB-137
Melling Part #
B-061
B-067
B-070
B-071
B-073
B-074
B-077
B-078
B-081
B-086
B-087
B-089
B-090
B-091
B-092
B-093
B-094
B-095
B-0100
B-0101
B-0103
B-0104
B-0106
B-0111
B-0112
B-0113
B-0114
B-0117
B-0118
B-0121
B-0122
B-0123
B-0124
B-0125
B-0126
B-0127
B-0128
B-0129
B-0131
B-0132
B-0133
B-0134
B-0135
B-0136
B-0137
COMPETITOR INTERCHANGE
S.A. Gear Part #
TB-139
TB-141
TB-142
TB-143
TB-144
TB-145
TB-146
TB-147
TB-150
TB-151
TB-153
TB-154
TB-155
TB-157
TB-158
TB-160
TB-161
TB-162
TB-164
TB-165
TB-166
TB-167
TB-168
TB-169
TB-170
TB-171
TB-172
TB-174
TB-176
TB-177
TB-179
TB-180
TB-181
TB-182
TB-183
TB-185
TB-186
TB-187
TB-190
TB-191
TB-192
TB-193
TB-194
TB-195
TB-199
Melling Part #
B-0139
B-0141
B-0142
B-0143
B-0144
B-0145
B-0146
B-0147
B-0150
B-0151
B-0153
B-0154
B-0155
B-0157
B-0158
B-0160
B-0161
B-0162
B-0164
B-0165
B-0166
B-0167
B-0168
B-0169
B-0170
B-0171
B-0172
B-0174
B-0176
B-0177
B-0179
B-0180
B-0181
B-0182
B-0183
B-0185
B-0186
B-0187
B-0190
B-0191
B-0192
B-0193
B-0194
B-0195
B-0199
S.A. Gear Part #
TB-200
TB-201
TB-202
TB-203
TB-204
TB-205
TB-208
TB-210
TB-211
TB-212
TB-214
TB-215
TB-216
TB-217
TB-218
TB-219
TB-220
TB-221
TB-223
TB-224
TB-226
TB-227
TB-228
TB-229
TB-230
TB-232
TB-233
TB-234
TB-235
TB-236
TB-237
TB-239
TB-240
TB-241
TB-244
TB-245
TB-246
TB-247
TB-248
TB-249
TB-251
TB-252
TB-253
TB-254
TB-255
Melling Part #
B-0200
B-0201
B-0248
B-0203
B-0204
B-0205
B-0208
B-0210
B-0211
B-0212
B-0214
B-0215
B-0216
B-0217
B-0218
B-0219
B-0220
B-0221
B-0223
B-0224
B-0226
B-0227
B-0228
B-0229
B-0230
B-0232
B-0233
B-0234
B-0235
B-0236
B-0237
B-0239
B-0240
B-0241
B-0244
B-0245
B-0246
B-0247
B-0248
B-0249
B-0251
B-0252
B-0253
B-0254
B-0255
325
COMPETITOR INTERCHANGE
S.A. Gear Part #
TB-256
TB-257
TB-258
TB-259
TB-262
TB-263
TB-264
TB-265
TB-271
TB-272
TB-273
TB-276
TB-277
TB-279
TB-280
TB-281
TB-282
TB-283
TB-285
TB-286
TB-287
TB-288
TB-289
TB-294
TB-295
TB-296
TB-297
TB-298
TB-299
TB-300
TB-301
TB-302
TB-303
TB-304
TB-305
TB-307
TB-308
TB-309
TB-310
TB-311
TB-312
TB-313
TB-314
TB-315
TB-318
326
Melling Part #
B-0256
B-0257
B-0258
B-0259
B-0262
B-0263
B-0264
B-0265
B-0271
B-0272
B-0273
B-0276
B-0277
B-0279
B-0280
B-0281
B-0282
B-0283
B-0285
B-0286
B-0287
B-0288
B-0289
B-0294
B-0295
B-0296
B-0297
B-0298
B-0299
B-0300
B-0301
B-0302
B-0303
B-0304
B-0305
B-0307
B-0308
B-0309
B-0310
B-0311
B-0312
B-0313
B-0314
B-0315
B-0318
S.A. Gear Part #
TB-320
TB-323
TB-326
TB-327
TB-329
TB-330
TB-331
TB-332
TB-333
TBK-041
TBK-070
TBK-071
Melling Part #
B-0320
B-0323
B-0236
B-0237
B-0329
B-0330
B-0331
B-0332
B-0333
B-041-1B
B-070-1
B-071-1