V-Series
V-Series
CONTURA II, III SWITCHES
The V-Series Contura II & III snap-in rocker switches offer countless unique options including choices for
ratings, circuits, colors, illuminations and symbols. These single or double pole switches feature removable
actuators in a choice of actuator styles and colors, and can be illuminated with either square or bar shaped lenses.
Actuators may be purchased and stocked separately. An optional plug-in terminal connector enables pre-wiring
of wire harnesses.
The Contura switches with sealed option, are certified to IP66, signifying complete protection against dust and
prolonged spray and submersion under pressure, and are recognized to UL1500 - Ignition Protection for Marine
Products. These switches are vibration, shock, thermoshock, moisture and salt spray resistant. Temperature
ratings range from -40°C to +85°C.
Resources:
Download 3D CAD Files
IGS
STP
Watch Product Video
Product Highlights:
Countless options for ratings, circuits, colors,
illuminations and legends
ŠŠ Certified to IP66 for front panel components
ŠŠ Vibration, shock, thermoshock, moisture and salt
spray resistant
ŠŠ Temperature range from -40°C to +85°C.
ŠŠ
Typical Applications:
On/Off Highway Equipment
Marine
ŠŠ Military Armored Vehicles
ŠŠ Mining Machinery and Equipment
ŠŠ Any application requiring environmental
protection
ŠŠ
ŠŠ
Carling Technologies, Inc.
60 Johnson Avenue, Plainville, CT 06062
Email: sales@carlingtech.com
Application Support: team2@carlingtech.com
Phone: 860.793.9281 Fax: 860.793.9231
www.carlingtech.com
2 | V-Series Contura Sealed Rocker Switches - Design Features
V-Series Switch
DESIGN FEATURES
INTERCHANGEABLE ACTUATORS
Panel redesign is a snap with our wide
range of rocker styles. Achieve maximum
design variety with minimum inventory.
Simply swap rockers to create an entirely
new look for your panel.
OPTIONAL PANEL SEAL
Prevents water/dust
ingress behind panel.
DUAL SEAL PROTECTION
Seals out water, dust,
debris, and enables switch
certification to IP66 for front
panel components.
MULTIPLE LIGHTING OPTIONS
In addition to Incandescent
lamps, our LED illumination is
offered in a wide array of light
intensities, colors, as well as
dual level, tri-color, and flashing
options.
CLEAN CONNECTIONS
Options for both eight and ten
terminal base styles with AMP &
Packard compatible connectors
affords myriad circuit options
while providing ease of assembly.
BRASS ROLLER PIN
Robust mechanism
eliminates the need for
lubricants. Enables switch
to withstand -40°C to
+85°C temperatures.
SILVER PLATED BUTT
CONTACT MECHANISM
Providing 50k to 100k
electrical cycles and
a variety of different
electrical ratings.
*Manufacturer reserves the right to change product specification without prior notice.
Email: sales@carlingtech.com Application Support: team2@carlingtech.com
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
V-Series Contura Sealed Rocker Switches - Actuator Options & Accessories | 3
Contura II & III
Contura X
Contura IV
Contura XI
Contura V
Contura XII
Contura VI (WAVE)
Contura XIV
Contura VII
Illuminated Indicators
& Accessories
The Contura II & III actuators are
constructed of thermoplastic
polycarbonate and are offered with
a hard nylon overlay or a “soft-touch”
elastomer overlay. These models
incorporate aesthetic designs on
the top and bottom of the rocker
featuring two rows of raised “bumps”
on the Contura II and three “indented”
lines on the Contura III.
The Contura IV’s “Shape to create
a Shape” actuator works with the
curves, contours & advanced styling
of the latest panel designs, flowing
with these advanced curves & radii.
This actuator style fits on the Contura
flush bracket/bezel.
The symmetrically curved Contura
V actuator provides the perfect
complement to the Contura IV’s
“Shape to create a Shape” design
concept. With its flush style mounting
bracket, Contura V can be mounted in
between two Contura IV’s, by itself, or
in groups.
The Contura VI WAVE sealed rocker
switches, when used in a row, create
an uniquely appealing “wave” design
on your panel. A variety of colors and
finishes are available for both rocker
and wave insert. Contura VI features
bar and oval lenses.
Contura VII featuring gently
curved corners and edges assuring
compatibility with most any panel
design. Intuitive feel is maximized
by the use of 2 embossed circular
pads located at opposite ends of
the rocker. Any combination of Bar
or Oval style lenses can be located
in the pads providing a truly unique
look, exclusive to Contura VII.
The raised bracket/bezel on the
Contura X helps prevent inadvertent
actuation of the rocker, as well as
preventing debris from being trapped
under the actuator. This curved rocker
style is available with a variety of
lenses and legends.
The raised bracket/bezel on the
Contura XI helps prevent inadvertent
actuation of the rocker, as well as
preventing debris from being trapped
under the actuator. This convex style
rocker is available with a wide variety
of lenses and legends.
The Contura XII version features a
paddle style actuator with the raised
bracket/bezel of Contura X and XI. The
contoured handle design provides
intuitive recognition and ease of
operation and is available with all
Contura X and XI lens and legend
offerings.
The Contura XIV represents a sleek new
crossover rocker design which should
appeal to Trucks, Buses and Heavy
Vehicles as well as the Marine Industry.
Intuitive feel is provided by recessed
ridges along with a Center Groove
which effectively defines the boundary
between top and bottom switch
functions.
Alert operator of systems functions
or malfunctions, are offered with
removable/replaceable lamps in
Contura II, II, V or X styles. Accessories
include connectors, mounting panels,
hole plugs, panel seals, and actuator
removal tools. Refer to accessories page
for full details
Email: sales@carlingtech.com Application Support: team2@carlingtech.com
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
4 | V–Series Contura Sealed Rocker Switches - General Specifications
Electrical
Contact Rating .4VA @ 24VDC (MAX) resistive
15 amps, 125VAC
10 amps, 250VAC
1/2 HP 125-250VAC
20 amps, 4-14VDC
15 amps, 15-28VDC
10A, 14VT
6A, 125VAC L
Dielectric Strength 1500 Volts RMS
Insulation Resistance 50 Megohms
Initial Contact Resistance 10 milliohms max. @ 4VDC
Life 50,000 - 100,000 cycles circuit
dependent
Contacts Silver alloy, silver tin-oxide, fine silver
Terminals Brass or copper/silver plate 1/4”
(6.3mm) Quick Connect terminations standard. Solder lug, Wire Lead
Mechanical
Endurance 150,000 cycles minimum
circuit dependent
Physical
Lighted Incandescent - rated 10,000 hours Neon - rated 25,000 hours
LED - rated 100,000 hours 1/2 life
(LED is internally ballasted for
voltages to 24VDC)
Seals Internal
Optional external gasket panel seal
Base Polyester blend rated to 125°C with
a UL flammability rating of 94V0.
Contura II,III,IV,V,
Hard Surface: Basic actuator VI, VII Actuator
structure molded of thermoplastic
polycarbonate with a hard Nylon 66 thermoplastic surface overlay.
Soft Surface: Basic actuator structure
molded of thermoplastic polycarbonate
with an elastomer overlay.
Contura X,XI,XII Actuator,VP Nylon 66 Reinforced rated to 105°C
Lens Polycarbonate rated at 100°C
Contura XIV
Polycarbonate lens/sub-rocker with ABS shell
Actuator Travel (Angular Displacement)
2 position 3 positions 18°
9° from center
Mounting Specifications
Agency Certifications
Environmental
Sealing Sealed version: IP66, this rating
applies to front panel components of
the actual switch only, and signifies complete protection against dust as well as powerful jets of water.
Corrosion Mixed Flowing Gas (MFG) Class III
3 year accelerated exposure per ASTM B-827, B-845 Silver and gold contacts
Operating Temp. -40°C to +85°C
Vibration 1 Per Mil-Std 202F, Method 204D
Test Condition A 0.06 DA or 10G’s
10-500 Hz. Tested with VCH connector.
Test criteria - No loss of circuit during
test, pre and post test contact resistance.
Vibration 2 Resonance search
24-50 Hz 0.40 DA
50-2000 Hz ±10 G’s peak
Horizontal Axis 3-5 G’s max.
Random
24 Hz 0.06 PSD-Gsq/Hz
60 Hz 0.50
100 Hz 0.50
200 Hz 0.025
2000 Hz 0.025
No loss of circuit during test; <10μ
seconds chatter.
Shock Per Mil-Std 202F, Method 213B, Test
Condition K @ 30G’s. Tested with
VCH connector. Test criteria - No loss
of circuit during test, pre and post
test contact resistance.
Salt Spray Per Mil-Std 202F, Method 101D, Test
Condition A, 96 Hrs. Sealed version only.
Dust Per Mil-Std 510.1, Method 510.2 Air
Velocity 300 ±200 Feet/Min, Test
Duration 16 Hrs.
Thermal Shock Per Mil-Std 202F, Method 107F, Test
Cond. A, -55°C to +85°C. Test criteria pre and post test contact resistance
Moisture Resistance Per Mil-Std 202F, Method 106F, Test
Criteria - pre and post test contact
resistance
Ignition Protection All Contura switches with sealed
construction meet the requirements
of UL1500/ISO8846 for ignition
protection, in addition to
conformance with EC directive
94/25/EC for marine products.
.830[21.08]
Panel Thickness Range
Gaskets Acceptable Panel Thickness
0
.030 to .250 (.76 to 6.35mm)
TEST CUT
1.450[36.83] HOLE IN
1
.030 to .109 & .147 to .157
ACTUAL
MATERIAL
(.76 to 2.77mm & 3.73 to 3.98mm)
Recommended: No gasket with panel
SWITCH
thickness of .032, .062, .093, .125,.187 or .250
MOUNTING HOLE
Email: sales@carlingtech.com Application Support: team2@carlingtech.com
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
V-Series Contura Sealed Rocker Switches- Contura II & III - Ordering Scheme | 5
V 1 D A B T 0 B
1
Series
2
Circuit
3
Rating
4
5
6
Termination Illumination Lamp
7
Lamp
8
Bracket
1 SERIES
V
2 CIRCUIT
( ) - momentary
Terminal Connections as viewed from bottom of switch: SP - single pole - uses terminals 1, 2 & 3.
8 terminal 10 terminal DP - double pole uses terminals 1, 2, 3, 4, 5 & 6.
8 - - 7
8 - - 7
Terminals 7, 8, 9 & 10 for lamp circuit only.
1 - - 4
1 - - 4
2 - - 5
2 - - 5
3 - - 6
3 - - 6
10 - - 9
Position:
1
2
3
SP DP
2 & 3, 5 & 6 Connected Terminals
1 & 2, 4 & 5
1A
ONNONE OFF
2B
(ON)NONE OFF
3C
ONNONE (OFF)
4D
ONNONE ON
5F
ONNONE (ON)
6J
ONOFF ON
7K
ONOFF (ON)
8L
(ON)OFF (ON)
SPECIAL CIRCUITS
H*
2 & 3
2 & 3, 5 & 4
5&4
G*
2 & 3, 5 & 6
2 & 3
OFF
S*
2 & 3, 5 & 6
2 & 3
1&2
M*
(2 & 3, 5 & 6)
2 & 3
OFF
R*
(2 & 3, 5 & 6)
2 & 3
2&1
E*
5 & 6
5 & 3
5&1
*Jumper between terminals 2 & 5 for circuits H,G,M,R & S are specified in
selection 4. External jumper between terminals 2 & 4 for circuit E are provided by customer. Circuit E may be used for SP OFF-ON-ON circuit.
3 RATING 3
1
.4VA @ 28VDC Resistive
B 15A 24V
C 20A 18V
D 20A 12V
E 20A 14V, 10A 14VT (circuit 1, 4 , A & D only)
F 10A 14V, 6A 14VT (circuit G only)
M .4VA/20A 12V
N .4VA/15A 24V
4 TERMINATION / BASE STYLE
8 term 10 Term Termination
12 .250 TAB (QC) no barriers
AB .250 TAB (QC) with barriers
JK .250 TAB (QC) no barriers
35 Solder Lug no barriers
CD Solder Lug
56 Wire Leads no barriers
EF Wire Leads
Note: Codes J & K for circuits H, G & M.
A R B 00
9
Actuator
10
Lens
11
Color
12
Legend
0 00
13
14
Legend
Actuator
Orientation Lens Legend
6,7 LAMP (SAME CODING FOR BOTH SELECTIONS)
Selection 6: above terminals 1 & 4; Selection 7: above terminals 3 & 6
No lamp
0
Neon
1 125VAC 2 250VAC
Incandescent 4 3V
5 6V
6 12V
7 18V
8 24V
LED*
superbrightsuperbright
Red
AmberGreen Red
2VDC
A LF R
6VDC
B MG S
12VDC
C NH T
24VDC
D PJ V
* Consult factory for “daylight bright” LED options. Typical current draw for
LED is 20ma.
8 FLUSH BRACKET COLOR 1, PANEL SEAL
Black
White
Gray
No SealB
W
G
One SealC
Y
H
9 ACTUATOR
0
No Actuator
A, B Contura II
C, D
Contura III
Actuator orientation above terminals:
10 LENS
0 - No Actuator
Z - No Lens
ClearWhite Amber Green Red
1
6
8
G
M
2
7
C
H
N
3
8
D
J
P
4
9
E
K
R
5
A
F
L
S
3,6
1,4
Blue
T
U
V
W
Y Lens color for LEDs must be clear, white, or match color of LED.
Green or blue lenses are not recommended with Neon lamps.
Jumper
No
No
Yes T2 to 5
No
No
No
No
5 ILLUMINATION
Lamp #1:above terminals 1 & 4 end of switch.; Lamp #2 above terminals
3 & 6 end of switch. Positive (+) and negative (-) symbols apply to LED
lamps only
Sealed Unsealed Lamps
Illumination Type Lamp wired to Terminals
S
0
NONE – –
A
1
1
INDEPENDENT 8 (+) 7 (–)
B
2
1
DOWN 3 (+) 7 (–)
C
3
2
UP 3 (+) 7 (–)
D
4
1
DOWN 3 (+) 7 (–)
2
DOWN
1 (+) 7 (–)
E
5
1
UP 1 (+) 7 (–)
2
UP
3 (+) 7 (–)
F
6
1
INDEPENDENT 8 (+) 7 (–)
2
UP
3 (+) 6 (–)
G
7
1
INDEPENDENT 8 (+) 7 (–)
2
UP 3 (+) 7 (–)
H
Z
2
INDEPENDENT 8 (+) 7 (–)
U
Y
1
INDEPENDENT 8 (+) 7 (–)
2
INDEPENDENT 10 (+) 9 (–)
SINGLE POLE SWITCHES ONLY
J8
1
DOWN
3 (+) 8 (–)
2
INDEPENDENT 6 (+) 7 (–)
KW
1
INDEPENDENT 8 (+) 7 (–)
2
INDEPENDENT 6 (+) 7 (–)
DOUBLE POLE SWITCHES ONLY
L9
1
DOWN
3 (+) 6 (–)
MR
1
UP
3 (+) 6 (–)
NT
1
DOWN
3 (+) 6 (–)
2
DOWN
1 (+) 4 (–)
PV
1
UP
1 (+) 4 (–)
2
UP
3 (+) 6 (–)
11 ACTUATOR COLOR 1 AND TEXTURE
0 - No Actuator
BlackGray Red
White
Soft Surface
BGRW
Hard Surface
CHSY
12 ACTUATOR LENS OR BODY LEGENDS 2
11ON 12OFF 13 I
14O
OFF ONO I
15 O O 16O O 17 O I 18 I O
F N N F
F F
For additional legend options & codes, visit us at www.carlingtech.com.
13 LEGEND ORIENTATION
0
No legend (used with codes 11-18 in selection 12)
1
Orientation 1
2
Orientation 2
3
Orientation 3
4
Orientation 4
14 ACTUATOR LENS LEGEND
00
No legend this location / no actuator
(used with codes 11-18 in selection 12) Selection 14 required when switch
requires two legends. If the two legends consist of one lens and one
body legend, lens legend must be specified in selection 12; body legend
specified in selection 14.
For legend options & codes, visit us at www.carlingtech.com.
Notes:
Consult factory to verify horsepower rating for your particular circuit choice.
1 Custom colors are available. Consult factory.
2 Body legends not available on Soft surface actuators; White imprinting is standard on black actuators; Black imprinting is standard on white, red and gray actuators. Custom colors are available, consult factory.
3 Additional ratings available. See V-Series Switch Accessories page.
4 Contura II available with two square lenses. Consult factory for details.
Email: sales@carlingtech.com Application Support: team2@carlingtech.com
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
6 | V-Series Contura Sealed Rocker Switches - Contura II & III Locking - Ordering Scheme
V 1 D A S W 0 B
1
Series
2
Circuit
3
Rating
4
5
6
Termination Illumination Lock
7
Lamp
1 SERIES
V
2 CIRCUIT
( ) - momentary
Terminal Connections as viewed from bottom of switch: SP - single pole - uses terminals 1, 2 & 3.
8 terminal 10 terminal DP - double pole uses terminals 1, 2, 3, 4, 5 & 6.
8 - - 7
8 - - 7
Terminals 7, 8, 9 & 10 for lamp circuit only.
1 - - 4
1 - - 4
2 - - 5
2 - - 5
3 - - 6
3 - - 6
10 - - 9
Position:
1
2
3
SP DP
2 & 3, 5 & 6 Connected Terminals 1 & 2, 4 & 5
1A
ON NONEOFF
4D
ON NONEON
6J
ON OFFON
7K
ON OFF(ON)
8L
(ON) OFF(ON)
9N
OFF NONEON
SPECIAL CIRCUITS
H*
2 & 3
2 & 3, 5 & 4
5&4
G*
2 & 3, 5 & 6
2 & 3
OFF
S*
2 & 3, 5 & 6
2 & 3
1&2
M*
(2 & 3, 5 & 6)
2 & 3
OFF
R*
(2 & 3, 5 & 6)
2 & 3
2&1
E*
5 & 6
5 & 3
5&1
*Jumper between terminals 2 & 5 for circuits H,G,M,R & S are specified in
selection 4. External jumper between terminals 2 & 4 for circuit E are provided by customer. Circuit E may be used for SP OFF-ON-ON circuit.
3 RATING 4
1
B
C
D
E
F
M
N
.4VA @ 28VDC Resistive
15A 24V
20A 18V
20A 12V
20A 14V, 10A 14VT (circuit 1, 4 , A & D only)
10A 14V, 6A 14VT (circuit G only)
.4VA/20A 12V
.4VA/15A 24V
4 TERMINATION / BASE STYLE
8 term 10 Term
Termination
12
.250 TAB (QC) no barriers
AB
.250 TAB (QC) with barriers
JK
.250 TAB (QC) no barriers
35
Solder Lug no barriers
CD
Solder Lug
56
Wire Leads no barriers
EF
Wire Leads
Note: Codes J & K for circuits H, G & M.
A Z E 00
8
Bracket
9
Actuator
10
Lens
11
Function
0
12
Legend
13
Legend
Orientation
7 LAMP
Lamp above terminals 3 & 6 end of switch
No lamp
0
Neon
1 125VAC 2 250VAC
Incandescent 4 3V
5 6V
6 12V
7 18V
8 24V
LED*
superbrightsuperbright
Red
AmberGreen Red
2VDC
A LF R
6VDC
B MG S
12VDC
C NH T
24VDC
D PJ V
* Consult factory for “daylight bright” LED options. Typical current draw for
LED is 20ma.
8 FLUSH BRACKET COLOR 1, PANEL SEAL
Black
White
Gray
No SealB
W
G
One SealC
Y
H
9 HARD SURFACE ACTUATOR 1
BlackGray Red White
Contura II
A BGH
C DEF
Contura III
3,6
Actuator orientation above terminals:
1,4
10 LENS
Z - No Lens
ClearWhite Amber Green Red Blue
3
8
D
J
P
V
Lens color for LEDs must be clear, white, or match color of LED.
Green or blue lenses are not recommended with Neon lamps.
Jumper
No
No
Yes T2 to 5
No
No
No
No
5 ILLUMINATION & SWITCH SEALING
Lamp #1:above terminals 1 & 4 end of switch.; Lamp #2 above terminals
3 & 6 end of switch. Positive (+) and negative (-) symbols apply to LED
lamps only
Sealed Unsealed Lamps Illumination Type Lamp wired to Terminals
S
0
NONE – –
C
3
2
UP 3 (+) 7 (–)
H
Z
2
INDEPENDENT 8 (+) 7 (–)
DOUBLE POLE SWITCHES ONLY
MR
1
UP
3 (+) 6 (–)
11 ACTUATOR LOCK FUNCTION AND COLOR 1
Lock Color Up
Down
Up & Down
Center 3
Match Actuator
A
HR 1
Black
BJ
S
2
White
CK
T
3
Red
DL
V
4
Safety Orange
EM
W
5
12 ACTUATOR LENS OR BODY LEGEND 2
00 - No Legend
21
22
23
24
OFF ON
O
I
25 O
26 O
27 O
28 I
F
N
F
For additional legend options & codes, visit us at www.carlingtech.com.
13 LEGEND ORIENTATION
0
No legend (used with codes 21-28 in selection 12)
1
Orientation 1
2
Orientation 2
3
Orientation 3
4
Orientation 4
ORIENTATION OF
ACTUATOR/LENS IN PANEL
ORIENTATION 1
ORIENTATION 4
AZC45-1
6 LOCK
Lock above terminals 1 & 4 end of switch
Wlock
45
AZC45-2
45
Notes:
Consult factory to verify horsepower rating for your particular circuit choice.
1 Custom colors are available. Consult factory.
2 White imprinting is standard on black actuators; Black imprinting is standard on white, red and gray actuators. Custom colors are available, consult factory.
3 Only available with 3 position circuits. Center OFF and special circuits only available with center position lock function.
4 Additional ratings available. See V-Series Switch Accessories page.
Email: sales@carlingtech.com Application Support: team2@carlingtech.com
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
ORIENTATION 3
ORIENTATION 2
V–Series Contura Sealed Rocker Switches - Contura II & III - Dimensional Specifications | 7
Dimensional Specifications: in. [mm]
Email: sales@carlingtech.com Application Support: team2@carlingtech.com
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
8 | V-Series Contura Sealed Rocker Switches - II to XIV - Circuit Diagrams
Circuit Diagrams:
CIRCUIT
CODE
CIRCUIT DIAGRAM
CIRCUIT
CODE
CIRCUIT DIAGRAM
3
1
3
2
3
5
3
3
3
1
2
5
3
4
2
1
5
3
4
6
2
3
1
4
1
5
6
5
6
2
5
3
4
SYM.
DEFINITION
DESIGNATES TERMINALS AND CONTACTS
DESIGNATES MAINTAINED CIRCUITS
DESIGNATES OTHER POSITION
H
2
5
SYMBOL LEGEND
3
8
6
3
2
G
1
3
2
6
3
3
2
5
S
2
7
1
5
F
1
6
R
2
2
6
5
2
E
6
4
M
2
3
6
3
6
D
1
4
5
3
1
6
2
5
3
L
2
3
5
2
5
C
1
1
6
2
4
6
K
2
3
4
2
B
1
3
J
2
3
CIRCUIT DIAGRAM
1
6
A
2
CIRCUIT
CODE
DESIGNATES MOMENTARY CIRCUITS
DESIGNATES TWO POSITION CONNECTION
2
5
DESIGNATES EXTERNAL JUMPER PROVIDED
BY CUSTOMER
Email: sales@carlingtech.com Application Support: team2@carlingtech.com
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
V-Series Contura Sealed Rocker Switches - II to XIV - Lamp Circuit Diagrams, Hazard Warning Circuit Diagrams | 9
Lamp Circuit Diagrams:
LAMP CIRCUIT
CODE
CIRCUIT DIAGRAM
LAMP CIRCUIT
CODE
+8
+8
A/1
F/6
1
-6
+3
L/9
2
LAMP CIRCUIT
CODE
CIRCUIT DIAGRAM
+3
-6
SPECIAL
#1
1
G/7
+3
+3
1
2
SPECIAL
#3
+1 +3 -4
H/Z
2
N/T
2
-7
+8
-6
2
1
SPECIAL
#4
+3
-8
1
J/8
2
+1 +3 -4
+6
P/V
2
1
-7
-6
1
2
-7
+1 +3
+8
K/W
2
1
+6
U/Y
2
1
-7
(-)7
+8
+10
1
2
-7
-9
J-Series Hazard Warning Circuit Diagrams:
CIRCUIT
CODE
CIRCUIT
CODE
CIRCUIT DIAGRAM
1
17 18 10(-)
3
J1
1
2
11 13
5
3 14
1
3
5
6
3 14
3 14
JJ
8
1
2
11 13
17 18 10(-)
J4
8
JA
17 18 10(-)
5
5
5
1
2
11 13
8
J3
17 18
3
2
1
3
1
2
8
J2
1
J5
17 18 10(-)
5
CIRCUIT DIAGRAM
10(-)
11 13
JK
1
-7
-7
+1 +3
2
-7
+8
C/3
+6
1
-7
+3
2
+8
-6
M/R
2
1
-7
+6
-7
+8
1
E/5
CIRCUIT DIAGRAM
-7
+3
D/4
+3
1
-7
B/2
LAMP CIRCUIT
CODE
CIRCUIT DIAGRAM
3 14 15 12
6 16
NOTE:
J circuits are available for all
non-locking V-Series styles.
Consult factory for partnumber details.
SYMBOL LEGEND
SYM.
DEFINITION
DESIGNATES TERMINALS AND CONTACTS
DESIGNATES LAMP LOCATION
Email: sales@carlingtech.com Application Support: team2@carlingtech.com
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
+3
2
10 | V-Series Contura Sealed Rocker Switches - Stand-Alone Components
Reduce inventory levels and cost by stocking actuators and base switches separately.
Contura II, III, IV, V, VI, VII, X, XI, XII, XIV Base switches separately: specify V with code selections 2-8 in the ordering schemes.
Contura II, III, IV, V Actuator only: VV with code A or C for selection 9, & with selections 10-14 in the ordering schemes.
Contura VI Actuator with lenses and inserts only: VV with code selections 9-16
Contura II, III, IV, V, VII Actuator only: VV with code A, C, E, G, P or Z for selection 9 & with selections 10-14 in the ordering schemes.
Contura X, XI, XII, XIV actuators with lenses separately: VV with code selections 9-14 in the ordering schemes.
Panel Seal: VPS
Contura X & XI actuators without lenses separately:
VVR 6 1 00 1
1
Actuator Separately
2
3
Actuator
Lens
Style/Color Opening
4
Actuator
Legend
5
Legend
Orientation
Contura XII actuators without lenses separately:
VVP J 1 Z 21 1 00
1
Actuator
2
Style &
Color
3
Lens
Opening
4
Lens
Opening
6
7
Legend
Legend
Orientation
5
Legend
1 CONTURA X & XI ACTUATOR SEPARATELY
VVR
1 CONTURA XII ACTUATOR SEPARATELY
VVP
2 ACTUATOR STYLE & COLOR
Black Gray WhiteRed
Contura X
1234
Contura XI
6789
2 ACTUATOR STYLE & COLOR
JBlack K Gray
N White
M Red
3,4 LENS OPENING FOR
Z No lens
1 Bar lens
Square lens
3 LENS OPENING FOR 1
1 One bar lens
2 One bar lenses
3 One square lens
4 two square lens
5
square lens on top/
bar lens on bottom
(Contura X only)
4 ACTUATOR LENS OR BODY LEGEND
00 - No Legend this location
11 ON 12 OFF
13 I
14 O
OFF
ON
O
I
15 O O 16 O O 17 O I 18 I O
F N
N F
F
F
For additional legend options & codes, visit us at www.carlingtech.com.
5 LEGEND ORIENTATION 1
0
No legend
1
Orientation 1
2
Orientation 2
3
Orientation 3
4
Orientation 4
5, 7 LENS OR BODY LEGEND 2
00 - No Legend
21
22
OFF
ON
2
Color
ORIENTATION 4
1
Lens Separately
posts mount toward actuator stem
bottom lens
}
3 White
Notes:
1 If actuator lens opening for 2 bar or 2 square lenses, legend orientation 0,1, or 2
must be chosen.
2 Center of actuator marking not available for Contura XII.
3 Legend is not available for bar style lens.
4 Not recommended with neon lamps.
5 Must also order top piece of 2 piece square lens separately.
4
Legend
5
Legend
Orientation
3 TRANSLUCENT LENS COLOR
1 Clear2
White3
Amber4
Green 45
Red6
Blue 4
4 LENS OR BODY LEGEND 2
00 - No Legend
21
22
OFF
ON
two piece
lens assembly
1 piece lens/bar lens are positioned the same as bottom lens for assembly,
minus the top lens. Lenses snap in from bottom.
3
Lens
Color
2 LENS STYLE 3
1 Bar lens
2 One Piece Square lens
3 Bottom of Two-Piece Square lens 5
1 TOP OF LENS SEPARATELY
VVT
top lens
2
Lens
Style
1 CONTURA X, XI & XII LENS SEPARATELY
VVL
Contura X, XI & XII actuator lens assembly:
actuator stem
ORIENTATION 2
VVL 2 1 00 0
ORIENTATION 2
2 COLOR
1 Clear 2 Smoke
ORIENTATION OF
ACTUATOR/LENS IN PANEL
ORIENTATION 1
Contura X, XI & XII actuator lens assembly separately:
Contura X, XI & XII top piece of 2-piece lens separately:
1
Lens Separately
24
I
6 LEGEND ORIENTATION 3
0 No legend
1 Orientation 1
2 Orientation 2
ORIENTATION 3
VVT 1
23
O
25 O
26 O
27 O
28 I
F
N
F
For additional legend options & codes, visit us at www.carlingtech.com.
ORIENTATION OF
ACTUATOR/LENS IN PANEL
ORIENTATION 1
2
24
I
25 O
26 O
27 O
28 I
F
N
F
For additional legend options & codes, visit us at www.carlingtech.com.
23
O
5 LEGEND ORIENTATION 3
0
No legend
1
Orientation 1
2
Orientation 2
3
Orientation 3
4
Orientation 4
ORIENTATION OF
ACTUATOR/LENS IN PANEL
ORIENTATION 1
ORIENTATION 4
ORIENTATION 2
ORIENTATION 3
Email: sales@carlingtech.com Application Support: team2@carlingtech.com
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
V-Series Contura Sealed Rocker Switches - Accessories | 11
Easily integrate Contura products into your system, with Contura Accessories
Q.C. SELECTION GUIDE
PART NO
Contura Connectors
COMPANY
SERIES
WIRE
RANGE
TIN GUIDE
PLAIN
Q.C.
SELECTION
AWG
PLATED
BRASS
PART NO
BRASS
02965580
COMPANY
SERIES
ORIENTATION
MM 2
(REF)
WIRE
RANGE
12
3.0
ORIENTIN
02965471
(2)16-14
2GUIDE
TATION
PLAIN
Q.C.
SELECTION
Q.C.12010601
SELECTION
GUIDE
Q.C.
GUIDE MM(2)1.0-2.0
AWGSELECTION
PLATED
BRASS
02965470
16-14 (REF) 1.0-2.0
BRASS
WIRE
WIRE
WIRE
PART NO
PART NO
PART NO
PACKARD
58 SERIES
B
RANGE .5-.8 RANGE
02965469
06288318RANGE
02965580
12 20-18 ORIEN3.0
COMPANY
COMPANY
ORIENTIN
TIN
102TIN
5.0
2
12084590
SERIES
PLAIN
SERIES
PLAIN
PLAIN
TATION
TATION
02965471 PLATED
12010601
(2)16-14
(2)1.0-2.0
AWG
MM
AWG
MM
AWG
MM 2
PLATED
PLATED
BRASS
BRASS12052224
BRASS (REF)
3.0
BRASS
BRASS
02965470 BRASS
16-14 12
1.0-2.0(REF)
B (REF)
COMPANY
SERIES
PACKARD
58 SERIES
0296558012015870
12
12
16-14
1.0-2.0
06288318 1202965580
20-18 3.0
.5-.8 3.0
PACKARD 02965469
12010601
12010601
12010601 (2)1.0-2.0
02965471
(2)16-14
(2)16-14
02965471 (2)16-14
02965471(2)1.0-2.0
12020035
(2)22-18
(2).5-.8
METRI-PACKPACKARD
PACKARD
PACKARD
10 1.0-2.0
5.0 B1.0-2.0
12084590
Q.C.
SELECTION
GUIDE
02965470
02965470
16-14
02965470
16-14
16-14
SERIES58 SERIES
58630
SERIES
58 SERIES
12015869
20-18
.5-.8
12015832
12052224
12 .5-.8
02965469
06288318
02965469
20-18
06288318
02965469
20-18
062883183.0 .5-.8
20-18
02965580
WIRE
12052222
20-22
.35-.5
12015870
16-14 RANGE
1.0-2.05.0
10
5.0
10
10
12084590
12084590
12084590
PACKARD COMPANY
ORIENTIN
12052224
12052224
12 (2)22-18
3.012052224
12
3.0
12
2
PLAIN
TATION
METRI-PACK SERIES
12020035
(2).5-.8
1.3-3
AWG 16-12 MM
Q.C.
SELECTION
GUIDE
PLATED
60253-2
60253-1
BRASS
12015870
12015870
12015870
16-14
1.0-2.0
16-14
1.0-2.0
16-14
630PACKARD
SERIES
AMP
BRASS
PACKARD
PACKARD
12015832
12015869
20-18 (2)
.5-.8 (2) 1.3
16 (REF)
WIRE
250 SERIES
(2)22-18
(2).5-.8
(2)22-18
A
(2).5-.8
(2)22-18
12020035
12020035
12020035
METRI-PACK
METRI-PACK 02965580
METRI-PACK
PART NO
12
3.0
20-22RANGE
.35-.5 20-18
630 SERIES
630
SERIES
63012052222
SERIES42100-2
18-14
.8-2
42100-1
FASTIN-FASTON
12015869
12015869
12015869
20-18
20-18
12015832
12015832
12015832
COMPANY
ORIEN12010601
(2)16-14.5-.8
(2)1.0-2.0 .5-.8
02965471
TIN
PACKARD
2 .35-.5
PLAIN
SERIES
TATION
16-12
1.3-3
20-22
20-22
20-22
12052222 PLATED
12052222
12052222
60295-2
22-18
.3-.9
60295-1
B
02965470
16-14.35-.5
1.0-2.0
AWG
MM
58 SERIES
60253-2
60253-1
BRASS
AMP
(REF)
BRASS
02965469
06288318
20-18
.5-.8
16-12 (2) 161.3-3
16-12 (2) 1.31.3-3
16-12
PART NO
ORIENTATION
3.0
(2)1.0-2.0
A
B1.0-2.0
.5-.8
B
TANG
TANG
5.0
TANG SYMBOL
=
SHOWS ORIENTATION OF TANG IN
TANG
TANG
TANG
A 3.0
SYMBOL
1.0-2.0
A(2).5-.8B
A
.5-.8
TANG SYMBOL =
SHOWS ORIENTATION OF TANG IN SLOT
.35-.5
SYMBOL
TANG
SYMBOL =TANGSHOWS
SYMBOL
=TANG
SYMBOL
=
ORIENTATION
SHOWS
OFORIENTATION
TANG
IN
SHOWS
SLOT
OFORIENTATION
TANG IN SLOT
OF TANG IN SLOT
1.3-3
SYMBOL
SYMBOL
SYMBOL
60253-2
60253-2
60253-2
60253-1
60253-1
60253-1
250
SERIES
AMPConsult Delphi
AMP Packard
AMP 12084590
NOTE:
and/or
Amp
on
actual
part
numbers
and
availability.
B (2) 1.3
02965580
12
3.0
10
5.0
(2)
16
(2)
1.3
(2)
16
(2)
1.3
(2)
16
FASTIN-FASTON
42100-1 trademark
42100-2
18-14
.8-2 B
250 SERIES
SERIES
250 SERIES
B
B
AMP is 250
a registered
of AMP Inc.
Harrisburg,
PA
TANG
12010601
(2)16-14
(2)1.0-2.0
12052224
12
3.0
18-14
.8-218-14
.8-218-14
.8-2
42100-2
42100-2
42100-2
FASTIN-FASTON FASTIN-FASTON
42100-1 02965471
42100-1
42100-1
Delphi
Packard
is a FASTIN-FASTON
registered
trademark
of
Delphi-Packard
Systems
Warren, Ohio
PACKARD
60295-1
60295-2
22-18
.3-.9 Electrical
B
16-14
1.0-2.0
12015870
16-14 .3-.9
1.0-2.0
22-18
22-18
.3-.9
22-18
.3-.9
60295-2
60295-2
60295-2
60295-1 02965470
60295-1
60295-1
58
SERIES
PACKARD
02965469
METRI-PACK
06288318
12020035
20-18
(2)22-18
.5-.8
(2).5-.8
SLOT
A
NOTE:
Delphi
Packard
and/or
Amp
on
actual
part
numbers
and
availability.
.820[20.83]
630
SERIES
NOTE:Consult
Consult Delphi
NOTE:
Packard
Consult
and/or
Delphi
NOTE:
Amp
Packard
Consult
on actual
and/or
Delphi
part
Amp
numbers
Packard
on
actual
and/or
and part
availability.
Amp
numbers
on actual
and part
availability.
numbers and availability.
12015869
20-18
.5-.8
12015832
10
5.0
12084590
.820[20.83]
AMP
a registered
registered
trademark
oftrademark
AMP
Inc.ofHarrisburg,
PA
AMP is
is a
AMP
trademark
is a registered
of AMP
AMP
Inc.
is Harrisburg,
a registered
AMP
PA
trademark
Inc. Harrisburg,
of AMP
PAInc. Harrisburg, PA
TANG
12052224
12of
3.0 of
20-22
.35-.5
12052222
Delphi Packard
Packard is is
Delphi
a registered
Packard
trademark
is trademark
Delphi
a registered
ofPackard
Delphi-Packard
trademark
is a registered
Electrical
Delphi-Packard
trademark
Systems
Electrical
Warren,
Delphi-Packard
Systems
Ohio Warren,
Electrical
Warren,
Ohio
Systems
Ohio ORIENTATION OF TANG IN SLOT
Delphi
a registered
of Delphi-Packard
Electrical
Systems
TANGOhio
SYMBOL Warren,
=
SHOWS
12015870
16-14
1.0-2.0
16-12
1.3-3
PACKARD
SYMBOL
60253-2
60253-1
AMP
.820[20.83]
.820[20.83]
(2)22-18
(2).5-.8
A
METRI-PACK
(2) 16
(2)
1.3 .820[20.83]
.820[20.83]
.820[20.83]12020035
.820[20.83]
250.820[20.83]
SERIES
B
630
SERIES
.820[20.83]
12015869
20-18
.5-.8
12015832
18-14
.8-2
42100-2
FASTIN-FASTON
42100-1
20-22
.35-.5
12052222
22-18
.3-.9
60295-2
60295-1
TANG SYMBOL =
SHOWS ORIENTATION OF TANG IN SLOT
16-12
1.3-3
SYMBOL
NOTE: AMP
Consult Delphi Packard
Amp on actual part numbers and availability.
60253-1and/or60253-2
.770[19.56]
(2) 16 PA (2) 1.3
AMP
is
a
registered
trademark
of
AMP
Inc.
Harrisburg,
250 SERIES
Delphi Packard is
a registered trademark
Electrical
Systems B
Warren, Ohio
18-14
.8-2
42100-2 of Delphi-Packard
FASTIN-FASTON
42100-1
.920[23.37]
60295-1
A
.920[23.37] .820[20.83]
.920[23.37]
A
A
B
B
AMP, PACKARD
AMP, PACKARD
58
PACKARDPACKARD
630
630
PACKARD 630
VC1
.820[20.83]
.920[23.37]
.920[23.37]
.920[23.37]
58
VC1
PACKARD 630
VC1
VC1
B
.820[20.83]
A
AMP,
58
AMP, PACKARD 58
AMP, PACKARD
AMP, PACKARD
58
58 PACKARD
AMP, PACKARD
58
B
B
VC1
B
VC2
PACKARD 630
B
VC1
1.266[32.16]
.920[23.37]
AMPAMP, PACKARD 58
AMP
A
VC2
VC2
.820[20.83]
1.266[32.16] 1.466[37.24]
1.266[32.16] 1.466[37.24]
1.266[32.16]
AMP
AMPAMP
.920[23.37]
B
1.466[37.24] 1.266[32.16]
1.266[32.16]
1.170[29.72]
VC2
AMP
1.466[37.24]
1.266[32.16]
5
AMP
PACKARD 630
VC2
B AMP
AMP, PACKARD 58
679 VC2
4 73 45
2
1.466[37.24]
A
VC2
69
15 8 6
9
A
PACKARD 630
.770[19.56]
.950[24.13]
B
.770[19.56]
.770[19.56]
1.170[29.72]
A
VC2
B
.920[23.37]
VC2
10 10
3 23 1VC1
1053 630
6729 417VC1
845 56 96 9 10 73 4 2 51 689 10 10
3 3
2 128 1
7104 8
3 5 2 619 8 7 4
28 10
1 38 2 1 784PACKARD
PACKARD 630
B
.3-.9
.920[23.37]
NOTE: Consult Delphi Packard and/or Amp on actual partAnumbers and availability.
AMP is a registered trademark of AMP Inc. Harrisburg, PA
VC2
A
A
A
A
A
.920[23.37]
.920[23.37]
PACKARD
630
Delphi
Electrical Systems
Warren,
Ohio
VC1Packard is a registered trademark of Delphi-Packard
VC1
PACKARD 630
PACKARD 630
22-18
60295-2
.770[19.56]
.770[19.56]
1.170[29.72]
1.170[29.72]
A
A
1.170[29.72]
PACKARD 630
PACKARD 630
.950[24.13]
.950[24.13]
.950[24.13]
PACKARD 630
B
A
B B
B
AMP, 58
PACKARD
58AMP, PACKARD 58
AMP, PACKARDPACKARD
58
AMP,
AMP,
PACKARD
PACKARD
58
630
8
7 3 4 235 1 62 8
1.466[37.24] 1.250[31.75]
B
1.250[31.75]
3
2
1
1
87
4
.950[24.13]
1.170[29.72]
A
A
PACKARD
PACKARD
630 630
5
A
6
B
AMP, PACKARD
PACKARD
630 58
7
4
5
B
6
PACKARD 630
AMP, PACKARD 58
AMP
1.266[32.16]
1.466[37.24] .770[19.56]
1.250[31.75]
AMP, PACKARD 58
AMP, PACKARD 58
10MARKING
3 2 DETAIL
1A 8 MARKING DETAIL
7MARKING
4DETAIL
5DETAIL
69 A
10
3 VC22 1 DETAIL
8
7 4 5 6MARKING
9 MARKING
3 2MARKING
1 8 DETAIL
7 4
5DETAIL
6
MARKING
MARKING DETAIL MARKING
MARKING
DETAIL
DETAIL MARKING
MARKING DETAIL MARKING DETAIL
DETAIL
DETAIL
MARKING DETAIL
MARKING
DETAIL MARKING DETAIL MARKING
AMP, PACKARD 58
PACKARD 630
FRONT
VIEWB
MARKING
PACKARD 630
VC1
FRONT VIEW
DETAIL
1.266[32.16]
FRONT VIEW
AMP, PACKARD 58
1.466[37.24]
AMP, PACKARD 58
VC1
REARFRONT
VIEW
VIEW REAR
B VIEW
MARKING
DETAIL
.920[23.37]
1.466[37.24]
REAR VIEW
AMP, PACKARD 58
8
7
4 5 69
VC1 10 3 2 1
VC1
VC1
CONNECTOR HOUSING
CONNECTOR
HOUSING
CONNECTOR HOUSING
A
MARKING DETAIL
MARKING
DETAIL A
1.266[32.16]
1.466[37.24]
VC1
PACKARD 630
PACKARD 630
VC1
FRONT VIEW
REAR VIEW VC1
B
CONNECTOR
HOUSING
MARKING DETAIL
B
MARKING DETAIL
REAR VIEW
FRONT VIEW
AMP, PACKARD 58
VC1 10 3 2 1 8
VC1
CONNECTOR HOUSING
1.266[32.16]
AMP, PACKARD 58
7 4
CONNECTOR HOUSING
MARKING DETAIL
FRONT VIEW
AMP
5
FRONT
REAR VIEW
VIEW
DETAIL
VC2
A
PACKARD 630
REAR VIEWMARKING
FRONT
REAR
VIEW
VIEW .950[24.13]
FRONT VIEW
DETAIL
1.466[37.24]
REAR VIEW
B
AMP
1.170[29.72]
B
CONNECTOR HOUSING
MARKING DETAIL
(For AMP terminals only)
REAR VIEW
10 3 2 1VC2
8
7 4 5 69
CONNECTOR
HOUSING
VC2
1.266[32.16]
1.466[37.24]
CONNECTOR
(For AMP HOUSING
terminals only)
MARKING DETAIL
FRONT VIEW
AMP
69
AMP
(For AMP terminals only)
MARKING DETAIL
FRONT VIEW
1.050[26.67]
1.050[26.67]
VC2
CONNECTOR HOUSING
(For AMP terminals only)
MARKING DETAIL
REAR VIEW
AMP, PACKARD 58
MARKING
DETAIL
B
FRONT
AMP,
PACKARDVIEW
58
3
2
1
8
4
5
6
PACKARD 630
REAR
FRONT
VIEW
VIEW
MARKING
REAR VIEW
DETAIL
1.250[31.75]
FRONT
VIEW
10 3 2 1 8 VC2
7 VC2
4 5 69
VCH
VC2
VCH
3 VCH
2
1 8
7 4
5
6
CONNECTOR HOUSING
CONNECTOR HOUSING
CONNECTOR HOUSING
CONNECTOR
HOUSING
CONNECTOR HOUSING
CONNECTOR
HOUSING
A
A
MARKING
DETAIL
MARKING DETAIL
MARKING
DETAIL VCH
1.250[31.75]
1.266[32.16]
1.466[37.24]
PACKARD 630
PACKARD 630
(For AMP terminals
(For
AMP terminals
only)
(Foronly)
AMP
terminals
only)
VC2
VC2
VC2
FRONT VIEW
REAR VIEW
FRONT VIEW
.950[24.13]
Contura X Boot (P/N VB1-01)
VC1
CONNECTOR HOUSING
FRONT
VIEW
MARKING
1.266[32.16]
.920[23.37]
FRONT VIEW
AMP
1.466[37.24]
MARKING DETAIL
REAR VIEW
A
FRONT
REARVIEW
VIEW
7
1.250[31.75]B
REAR VIEW
MARKING
AMP, PACKARD 58
DETAIL
REAR VIEW
MARKING DETAIL
REAR VIEW
CONNECTOR HOUSING
MARKING
DETAIL
B
REAR
VIEW
AMP,
PACKARD
58
VCH
7 4
5 6
HOUSING
VCH
CONNECTOR
1.250[31.75]
CONNECTOR HOUSING
MARKING DETAIL
FRONT VIEW
MARKING DETAIL
REAR VIEW
Additional V-Series Ratings
1.050[26.67]
1
VCH
CONNECTOR HOUSING
.4VA @ 28VDC Resistive
VAC 1/2 HP, No Agency Listings
10A 250VAC 1/2 HP, 15A 125 VAC 1/2 HP, UL Recognized, CSA Certified
15A 125VAC 1/2 HP, 12(2)A 125 VAC μ T85
1.050[26.67]
15A 125VAC 1/2VB1-01
HP, 12(6)A 125 VAC T85
72 VB1-01
CONTURA
X BOOT
2.000[50.80]
2
.757[19.23]
.757[19.23]
250VAC,
15A 125VAC,
8 10A
CONTURA
X BOOT 1/2 HP 125-250VAC, 12(2)A 250 VAC μ T85
2.000[50.80]
1.050[26.67].757[19.23]
2
VB1-01 15A 125VAC, 1/2 HP 125-250VAC, 12(6)A 250 VAC T85
9 10A 250VAC,
2.000[50.80]
CONTURA X BOOT
B VB1-01
15A 24V
2.000[50.80]
CONTURA
X BOOT
C
20A
18V
.757[19.23]
D
20A 12V
.757[19.23]
E
20A 14V, 10A 14VT (circuits 1, 4, A, & D only)
3.99 [101.35]
3.99 [101.35] .757[19.23]
3.99 [101.35]
F
10A 14V, 6A, 14VT (circuit G only)
.757[19.23]
GVRT 20A 6V
VRT
VRT
ACTUATOR
ACTUATOR
ACTUATOR REMOVAL
H REMOVAL
20A 3V REMOVAL
3.99 [101.35]
.900 [22.86]
.900 [22.86]
.900 [22.86]
TOOL
TOOL
TOOL
L bracket)
15A
10A
250VAC,
(For flush
(For125
flush VAC,
bracket)
(For
flush
bracket) 1/2 HP 125-250 VAC; 6A 125 VAC L
M VRT.4VA/20A 12V (combi-contact)
ACTUATOR REMOVAL
TOOL
.900 [22.86]
(combination gold/silver contacts for borderline dry circuit applications)
(For flush bracket)
3.99 [101.35]
N
.4VA/15A 24V (combi-contact)
3.99 [101.35]
VRT(combination gold/silver contacts for borderline dry circuit applications)
3.99 [101.35]
2.000[50.80]
2.000[50.80]
1.050[26.67]
2.000[50.80]
1.050[26.67]
VB1-01
VB1-01
4VB1-01
10A
250VAC
1/2
HP,
15A 125
CONTURA X BOOT
CONTURA X BOOT
CONTURA X BOOT
51
62
Contura II, III, IV, V, VI & VII Actuator
Removal Tool (P/N VRT)
TOP
TOP
TOP
INSERT POINTS UNDER
INSERT POINTS UNDER
INSERT POINTS UNDER
ACTUATOR
ACTUATOR
ACTUATOR
HOLD FLUSH ON BRACKET ANDHOLD
PUSH FLUSH ON BRACKET AND HOLD
PUSH FLUSH ON BRACKET AND PUSH
IN
IN
IN
TOP
TOP
TOP
TOP
INSERT POINTS UNDER
ACTUATOR
HOLD FLUSH ON BRACKET AND PUSH
IN
TOP
TOP
TOP
INSERT POINTS UNDER
ACTUATOR
HOLD FLUSH ON BRACKET AND PUSH
IN
TOP
TOP
ACTUATOR REMOVAL
TOOL
(For flush bracket)
VRT
ACTUATOR
REMOVAL
VRT
NOTESACTUATOR
.900 [22.86]
TOOL
REMOVAL
Consult factory to
determine
availability for individual circuits and their HP rating.
(For flush bracket)
.900 [22.86]
TOOL
flush bracket)
1.
Not (For
available
with Contura 7 or 14 rocker styles.
.900 [22.86]
INSERT POINTS UNDER
TOP
ACTUATOR
INSERT HOLD
POINTSFLUSH
UNDER
ON BRACKET AND PUSH
IN
ACTUATOR
HOLD FLUSH ON BRACKET AND PUSH
TOP
IN
2.
Ratings 6 - 9 are UL, CSA & VDE certified, require terminations A or B for double
pole circuits, & are not available with illumination circuits 4, 8, D, J, N, & T or with
wire lead or solder lug terminations.
Circuits 1, 4, A, D, H, M & E are not available with rating 6 & 8. Rating 7 & 9 only available
with circuits 1, 4, A & D. Circuits 2, 3, 5, 7, 8, K, L are 1/2 HP 250VAC only with rating 8.
Ratings 6 & 7 must specify lamp code 1 (125VAC neon). Ratings 8 & 9 must specify lamp
code 2 (250VAC neon). Rating L available with circuits 1, 4, A & D only.
Email: sales@carlingtech.com Application Support: team2@carlingtech.com
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
12 |
V-Series Contura Sealed Rocker Switches - Accessories
Contura Mounting Panels
Dimensional Specifications: in. [mm]
Contura Hole Plug
Dimensional Specifications: in. [mm]
1.450 [36.83]
.830 [21.08]
TEST CUT
HOLE IN
ACTUAL
MATERIAL
VHP
CONTURA II,III HOLE PLUG
1.240 [31.50]
1.820 [46.23]
.430 [10.92]
VHP
CONTURA II,III HOLE PLUG
VH1
STANDARD HOLE PLUG
(No wing serrations)
(With VC1 connector attached)
2.000 [50.80]
VH2
STANDARD HOLE PLUG
(With wing serrations)
1.067 [27.10]
1.928 [48.97]
VH3
CONTURA IV HOLE PLUG
(No wing serrations)
VH4
CONTURA IV HOLE PLUG
(With wing serrations)
DETAIL VIEW
VH1,VH3 & VH5
HOLE PLUGS
(No wing serrations
for ease of removal)
1.020 [25.91]
VH5
CONTURA V HOLE PLUG
(No wing serrations)
VH6
CONTURA V HOLE PLUG
(With wing serrations)
DETAIL VIEW
VH2,VH4 & VH6
HOLE PLUGS
(With wing serrations)
Email: sales@carlingtech.com Application Support: team2@carlingtech.com
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
Reps & Contact | 13
Authorized Sales Representatives
Click on the group name on the map below to find your local representative or visit
www.carlingtech.com/findarep.
«
«
Matera
W. Canada
Matera
E. Canada
MIDWEST
DM
Michigan
TEMCO Northwest
Alaska, Hawaii
«
NORTHERN
Hanna Lind Ltd.
Melody
Emery
Sierra
Bridge Marketing
Omega Limited
Dy-tronix Inc.
LD. Allen
Norris
DM Assoc
East
Pacent
DM
Assoc
TSI North
TSI
WEST
Signal
Enterprises
Luscombe
Engineering
Pinnacle Marketing
Sunbelt Components
«
South America
DM Mexico
Mexico
SOUTHEAST
ProRep
Solutions
«
Matrix
LATIN AMERICA
Americas
Europe
Middle East
Africa
Asia-Pacific
Oceania
About Carling
Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches
and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power
distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide,
Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical
components, they engineer powerful solutions! To learn more about Carling please visit
www.carlingtech.com/company-profile.
To view all of Carling’s environmental, quality, health & safety certifications please visit
www.carlingtech.com/environmental-certifications
Email: sales@carlingtech.com Application Support: team2@carlingtech.com
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
Worldwide Headquarters
Carling Technologies, Inc.
60 Johnson Avenue, Plainville, CT 06062
Phone: 860.793.9281 Fax: 860.793.9231
Email: sales@carlingtech.com
Northern Region Sales Office: nrsm@carlingtech.com
Southeast Region Sales Office: sersm@carlingtech.com
Midwest Region Sales Office: mrsm@carlingtech.com
West Region Sales Office: wrsm@carlingtech.com
Latin America Sales Office: larsm@carlingtech.com
Asia-Pacific Headquarters
Carling Technologies, Asia-Pacific Ltd.,
Kowloon, Hong Kong
Phone: Int + 852-2737-2277 Fax: Int + 852-2736-9332
Email: sales@carlingtech.com.hk
Shenzhen, China: shenzhen@carlingtech.com
Shanghai, China: shanghai@carlingtech.com
Pune, India: india@carlingtech.com
Kaohsiung, Taiwan: taiwan@carlingtech.com
Yokohama, Japan: japan@carlingtech.com
Europe | Middle East | Africa Headquarters
Carling Technologies LTD
4 Airport Business Park, Exeter Airport,
Clyst Honiton, Exeter, Devon, EX5 2UL, UK
Phone: Int + 44 1392.364422 Fax: Int + 44 1392.364477
Email: ltd.sales@carlingtech.com
Germany: gmbh@carlingtech.com
France: sas@carlingtech.com
www.carlingtech.com
REV_08_2016