PALLET DESIGN SYSTEM Version 5.1 All dimensions in inches Pallet Specification Sheet Customer: Prepared by: GMA User Hinchcliff Products Co. 13477 Prospect Rd. Strongsville, OH 44136 Phone: 440-238-5200 Fax: 440-238-5202 E-Mail: sales@hinchcliffproducts.com PDS License: 63 Printed: November 19, 2014 Pallet ID: 48x40 GMA Classification: 48.00 x 40.00, Stringer-Class, Double-Face Non-Reversible, Partial 4-Way, Reusable, New Manufacture Pallet Treatments: ISPM-15 Compliance: Heat Treatment (HT) Top View Bottom View 40.00 40.00 Side View Components Pr op Length 40.00 40.00 ff Style: Deckboard Type: New Lumber Thickness Width Number 3 0.630 3.500 2 0.630 5.500 Volume: 3.8 bd ft PD S Hi nc hc li Type: New Lumber Number Width Height Length 3 1.380 3.500 48.00 Volume: 4.8 bd ft Partial 4-way Entry Notch: Depth: 1.380 Length: 9.00 Location: 6.00 Radius: 1.50 Spec Sheet Notes: ts y Fasteners: Fastener ID: Fastener Type: Fastener Length: Thread Length: Thread Diameter: Wire Diameter: Head Diameter: Flutes: Helixes: Pitch: Thread Angle: MIBANT Angle: FWC: 2" Machine Nail Helically Threaded Nail 2.00 1.33 0.137 0.120 0.281 4 8.0 0.166 57 28 3.25 Total Number: 84 Li c en Bottom Deck: Stringers: Length 40.00 40.00 er ty o Style: Deckboard Type: New Lumber Number Thickness Width 5 0.630 3.500 2 0.630 5.500 Volume: 5.0 bd ft Pr od uc Top Deck: Materials : 4.76 fN W 0.00 48.00 63 48.00 40.00 se End View Co mp an GMA PC A 48.00 New Lumber: Lumber ID: Mixed Hardwood Species Class High Density Eastern Hardwoods Yellow Poplar Eastern Oaks Grade Standard &BTR Standard &BTR Standard &BTR Moisture Content (at manufacture and assembly): Green Total New Lumber Volume: 13.6 bd ft All output generated from the PDS software (including without limitation the designs, drawings, plans, specification sheets, data, analyses, information, materials or other output produced by or with the assistance of the Software (PDS Output) are protected by copyright and other intellectual property laws and cannot be reproduced without the prior written consent of NWPCA. Lessee may provide a copy of the Output, which must bear the Lessee’s watermark, to its manufacturer for the sole purpose of manufacturing the pallet for Lessee to sell or to its direct pallet customer for the sole purpose of selling pallets to that customer. Lumber Mix 30 % 10 % 60 % PALLET DESIGN SYSTEM Version 5.1 Pallet Structural Analysis Customer: Prepared by: GMA User Hinchcliff Products Co. PDS License: 63 Printed: November 19, 2014 Pallet ID: 48x40 GMA Classification: 48.00 x 40.00, Stringer-Class, Double-Face Non-Reversible, Partial 4-Way, Reusable, New Manufacture Pallet Treatments: ISPM-15 Compliance: Heat Treatment (HT) General Load Type: Uniformly Distributed - Full Pallet Coverage Custom Load Specification: Boxes, Interlock Stacked Load Stabilizers: Stretch Wrap Load Weight Variability: Low Service Environment: Wet Environment (EMC > 19%) Maximum Deflection User Load Support Condition Safe at Specified for Maximum Maximum Deflection Deflection Side View End View Load Load Limit Limit 21.00 21.00 Racked Across Width Pr od uc er ty o Forklift Support Span = 36.00 42.00 4.00 23.00 Warehouse Storage GMA ff hc li Pr op Stacked 1 Unit Load High Lateral Collapse Resistance PD S GMA Hi nc Stacked 2 Unit Loads High 4571 lbs. 0.19 in. ---- ---- Interior Top Deckboard 2221 lbs. 1.03 in. ---- ---- Interior Bottom Deckbd 0.42 in. ---- ---- Interior Top Deckboard 6842 lbs. 0.21 in. ---- ---- Interior Top Deckboard 4276 lbs. per pallet 0.21 in. ---- ---- Interior Top Deckboard 3500 lbs. Li c en Enter and Lift from Pallet End GMA Center Stringer ts 2 Beam Support GMA ---- 63 GMA fN W 3 Beam Support ---- : Span = 44.00 0.53 in. se GMA 1757 lbs. Co mp an 2 Beam Support y PC A Racked Across Length Low Critical Member Medium Good Excellent The recommendations from PDS are based on the NWPCA's continuing program of laboratory and field research. They represent the best available engineering information compiled to date. However, the quality of workmanship, the input data, and the conditions in which pallets are used may vary widely. Therefore, the Association cannot accept responsibility for pallet performance or design as actually constructed. Wood pallets manufactured to this PDS design are for the sole purpose of storing and/or transporting material. Under no circumstance should any person stand, step, or lean upon them or otherwise use them for support. H/V = 2.88 Pallet Design System - Version 5.1 (C) Copyright 1985-2013 National Wooden Pallet and Container Association, 1421 Prince Street, Suite 340, Alexandria, Virginia 22314-2805 http://www.palletcentral.com All Rights Reserved PALLET DESIGN SYSTEM Version 5.1 Pallet Durability Analysis Customer: Prepared by: GMA User Hinchcliff Products Co. PDS License: 63 Printed: November 19, 2014 Pallet ID: 48x40 GMA Classification: 48.00 x 40.00, Stringer-Class, Double-Face Non-Reversible, Partial 4-Way, Reusable, New Manufacture Pallet Treatments: ISPM-15 Compliance: Heat Treatment (HT) GMA Pallet Damage Rate Analysis The Pallet Damage Rate Analysis simulates a series of forces and impacts applied to the pallet during each handling cycle. The frequency and severity of these impacts are estimates based on laboratory measurements, warehouse observations, and the Virginia Tech FasTrack Handling Cycle. The resistance to damage and the damage level requiring component repair or replacement are based on laboratory testing and the NWPCA Uniform Standard for Wood Pallets. Co mp an y PC A Service Environment Conditions: Average Handling and Treatment, Medium-Duty Loads, Wet Environment (EMC > 19%) Results from Handling Cycle Simulation : 63 Cycles Until Damage Level to Connections Warrants Repair 2.9 se Li c en ff PD S hc li Hi nc Pr op Pr od uc (2) (5) (2) (3) (2) (1) er ty o Top Leadboards Top InteriorBoards Bottom Leadboards Bottom InteriorBoards Exterior Stringers Interior Stringers ts fN W Pallet Components Cycles Until Damage Level to Components Warrants Repair or Replacement 38.2 42.9 16.0 > 50 6.0 26.9 3.8 12.0 PALLET DESIGN SYSTEM Version 5.1 Pallet Physical Property Analysis Customer: Prepared by: GMA User Hinchcliff Products Co. PDS License: 63 Printed: November 19, 2014 Pallet ID: 48x40 GMA Classification: 48.00 x 40.00, Stringer-Class, Double-Face Non-Reversible, Partial 4-Way, Reusable, New Manufacture Pallet Treatments: ISPM-15 Compliance: Heat Treatment (HT) At Manufacture At 25% MC At 19% MC At 15% MC At 12% MC 59 lbs. 43 lbs. 41 lbs. 39 lbs. 38 lbs. Average Pallet Weight Width Shrinkage Thickness Shrinkage Dimensional Change due to Wood Drying 0.630 in. Thickness 3.500 in. Width 5.500 in. Width 3.500 in. Height 1.380 in. Width 0.630 in. Thickness 3.500 in. Width 5.500 in. Width 0.015 in. (+/- 0.005 in.) 0.084 in. (+/- 0.027 in.) 0.132 in. (+/- 0.043 in.) 0.084 in. (+/- 0.027 in.) 0.033 in. (+/- 0.011 in.) 0.015 in. (+/- 0.005 in.) 0.084 in. (+/- 0.027 in.) 0.132 in. (+/- 0.043 in.) 0.022 in. (+/- 0.007 in.) 0.122 in. (+/- 0.039 in.) 0.191 in. (+/- 0.062 in.) 0.122 in. (+/- 0.039 in.) 0.048 in. (+/- 0.016 in.) 0.022 in. (+/- 0.007 in.) 0.122 in. (+/- 0.039 in.) 0.191 in. (+/- 0.062 in.) 63 Co mp an se Li c en Pr od uc PD S Hi nc hc li ff er ty o fN W Bottom Deckboards ts Stringers Pr op Shrinkage from Manufacture to 15% MC y Top Deckboards Shrinkage from Manufacture to 19% MC : Original Dimension PC A Component PALLET DESIGN SYSTEM Version 5.1 All dimensions in inches 2-D Pallet Drawings Pallet ID: 48x40 GMA Classification: 48.00 x 40.00, Stringer-Class, Double-Face Non-Reversible, Partial 4-Way, Reusable, New Manufacture Pallet Treatments: ISPM-15 Compliance: Heat Treatment (HT) Side View 48.00 End View 42.50 35.75 29.00 22.25 15.50 8.75 40.00 fN W Top View 6.00 40.00 5.500 Hi nc Pr op 3.500 3.25 3.25 y 17.93 1.380 GMA User 1.380 ts 40.00 9.50 3.500 48.00 3.75 3.500 3.25 3.75 3.500 3.25 3.25 5.500 All output generated from the PDS software (including without limitation the designs, drawings, plans, specification sheets, data, analyses, information, materials or other output produced by or with the assistance of the Software (PDS Output) are protected by copyright and other intellectual property laws and cannot be reproduced without the prior written consent of NWPCA. Lessee may provide a copy of the Output, which must bear the Lessee’s watermark, to its manufacturer for the sole purpose of manufacturing the pallet for Lessee to sell or to its direct pallet customer for the sole purpose of selling pallets to that customer. Customer: 0.630 0.00 Bottom View Li c en 3.500 3.25 Pr od uc 3.500 ff 48.00 1.380 5.500 PD S 3.500 hc li 3.500 er ty o 5.500 17.93 63 R = 1.50 9.00 18.00 : 9.00 0.630 se 6.00 4.76 Co mp an 3.500 GMA 1.380 PC A 0.00 Prepared by: Hinchcliff Products Co. 13477 Prospect Rd. Strongsville, OH 44136 Phone: 440-238-5200 Fax: 440-238-5202 E-Mail: sales@hinchcliffproducts.com PDS License: 63 Printed: November 19, 2014 9.50 PALLET DESIGN SYSTEM Version 5.1 3-D Pallet Drawings Pallet ID: 48x40 GMA Classification: 48.00 x 40.00, Stringer-Class, Double-Face Non-Reversible, Partial 4-Way, Reusable, New Manufacture Pallet Treatments: ISPM-15 Compliance: Heat Treatment (HT) y se : 63 Co mp an ts Bottom View Li c en Pr od uc ff PD S hc li Hi nc Pr op er ty o fN W PC A Top View All output generated from the PDS software (including without limitation the designs, drawings, plans, specification sheets, data, analyses, information, materials or other output produced by or with the assistance of the Software (PDS Output) are protected by copyright and other intellectual property laws and cannot be reproduced without the prior written consent of NWPCA. Lessee may provide a copy of the Output, which must bear the Lessee’s watermark, to its manufacturer for the sole purpose of manufacturing the pallet for Lessee to sell or to its direct pallet customer for the sole purpose of selling pallets to that customer. Customer: GMA User Prepared by: Hinchcliff Products Co. 13477 Prospect Rd. Strongsville, OH 44136 Phone: 440-238-5200 Fax: 440-238-5202 E-Mail: sales@hinchcliffproducts.com PDS License: 63 Printed: November 19, 2014 PALLET DESIGN SYSTEM Version 5.1 All dimensions in inches, weights in lbs. Unit Load Specification and Drawings Customer: Prepared by: GMA User Hinchcliff Products Co. 13477 Prospect Rd. Strongsville, OH 44136 Phone: 440-238-5200 Fax: 440-238-5202 E-Mail: sales@hinchcliffproducts.com PDS License: 63 Printed: November 19, 2014 Pallet ID: 48x40 GMA Classification: 48.00 x 40.00, Stringer-Class, Double-Face Non-Reversible, Partial 4-Way, Reusable, New Manufacture Pallet Treatments: ISPM-15 Compliance: Heat Treatment (HT) End View Top View 48.00 40.00 40.00 Co mp an 63 Container Type: Corrugated Box ff Type: Stretch Wrap ts PD S Hi nc Wrap hc li Pr op Load Stabilizers se Number of Boxes per Layer: 9 Number of Layers per Unit Load: 4 Column Stacked Number of Boxes per Unit Load: 36 Total Weight of Load: 720 lbs. Total Height of Load: 40.000 in. Li c en Weight per Box: 20 lbs. Outside Dimensions: Length: 16.000 Width: 12.000 Depth: 10.000 * Pr od uc er ty o Box Style: Regular Slotted Container (RSC) #0201 Combined Board Type: Singlewall Flute Profile: C-Flute Caliper: 0.156 ECT: 32.000 48.00 : fN W 44.76 y PC A Side View All output generated from the PDS software (including without limitation the designs, drawings, plans, specification sheets, data, analyses, information, materials or other output produced by or with the assistance of the Software (PDS Output) are protected by copyright and other intellectual property laws and cannot be reproduced without the prior written consent of NWPCA. Lessee may provide a copy of the Output, which must bear the Lessee’s watermark, to its manufacturer for the sole purpose of manufacturing the pallet for Lessee to sell or to its direct pallet customer for the sole purpose of selling pallets to that customer.