TRANSMITTAL
5995 Greenwood Plaza Blvd.
Suite 100
Greenwood Village, CO 80111-4710
303-571-5377
303-629-7467 (fax)
PROJECT:
TO:
ATTN:
Ph/Fax:
No. 15D5111-0001
DATE: 04/14/2015
JCS-Colorow Elementary School M15
The LKA Partners Inc
430 N Tejon St #208
Co Springs CO 80903
RE:
26000-Electrical
Adam Thesing
JOB:
719-473-8446
WE ARE SENDING:
SUBMITTED FOR:
15D5111
ACTION TAKEN:
Shop Drawings
Approval
Approved as Submitted
Letter
Your Use
Approved as Noted
Prints
As Requested
Returned After Loan
Change Order
Review and Comment
Resubmit
Submit
Plans
SENT VIA:
Samples
Returned
Specifications / Product Data
Attached
Returned for Corrections
Other:
Separate Cover Via:
Due Date: 04/20/2015
NOTES:
Item
Package
Code
Submittal
26000
265100.01
Rev. Copies Date
1
1
04/14/2015
Description
Status
Lighting
Architect Review
CC:
Signed:
Kirk Askelson
COLOROW ELEMENTARY
SCHOOL
APRIL 10, 2015
TRANSMITTAL
QED - DENVER
TO
ATTN
APRIL 10, 2015
DATE
DON MASON
RE
DANNY JONES
WE ARE SENDING YOU:
Attached
Change of Order
Copy of Letter
Prints
Samples
Shop Drawings
X
Cutsheets
Plans
Specifications
Under Separate Cover
COPIES
1 PDF
DATE
04.10.15
DESCRIPTION
Submittals Included:
THESE ARE TRANSMITTED: (AS CHECKED BELOW)
X
For Approval
Approved as submitted
Resubmit _______ copies for approval
For your use
Approved as noted
Submit _________ copies for distribution
Record Only
Return _________ corrected prints
For review and comment
Other_________________________________________________________________
FOR BIDS DUE ________________20 _________
REMARKS:
IF SUBMITTALS ARE “FOR APPROVAL” AND MATERIAL IS RELEASED WITHOUT THE RETURN OF
ONE COMPLETE SET OF APPROVED DRAWINGS, THIS WILL BE DEEMED YOUR WAIVER OF APPROVAL.
***CONTRACTOR TO VERIFY:***
VOLTAGE:
ROW INFORMATION:
COLORS/FINISHES:
SWITCHING OPTIONS:
CEILING TYPE:
SUSPENSION LENGTHS:
SPECIFIC DIMMING BALLASTS (if required)
OTHER:
FILE
COPY TO __________________________________________
DANNY JONES
BY: ____________________________
IF ENCLOSURES ARE NOT AS NOTED, PLEASE NOTIFY US AT ONCE
Submitting Agency:
Description:
2FSL4 30L SLD PWS1836 LP840
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
FEATURES & SPECIFICATIONS
INTENDED USE — The FS Series recessed LED luminaire combines modern aesthetics and
performance in a general lighting product that enables the transformation from fluorescent to
LED. The high efficacy light engine delivers long life and excellent color to ensure a quality lighting
installation. Integrated controls options provide for design flexibility and optimum energy savings.
Multiple lumen packages and driver options provide solutions for all your lighting applications.
Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic
Environmental Compatibility table for suitable uses.
CONSTRUCTION — Rugged, one-piece cold-rolled steel coated polyester, painted after fabrication. The
satin white lens provides excellent shielding and wide distribution. End plates include integral T-bar clips.
Fixture may be mounted and wired in continuous rows. Total fixture height is only 4-3/8".
ELECTRICAL — Long-life LEDs, coupled with high-efficiency drivers, provide superior illumination for
extended service life. 90% LED lumen maintenance at 60,000 hours (L90/60,000). The LEDs have a CRI of 82.
eldoLED driver options deliver choice of dimming range, and choices for control, while assuring flicker-free,
low-current inrush, 89% efficiency and low EMI.
Optional integrated nLight® controls make each luminaire addressable - allowing it to digitally
communicate with other nLight enabled controls such as dimmers, switches, occupancy sensors and
photocontrols. Simply connect all the nLight enabled control devices and the FSL luminaires using standard
CAT-5 cabling. Unique plug-and-play convenience allows devices and luminaires to automatically discover
each other and self-commission.
Lumen Management: Unique lumen management system (option N80) provides onboard intelligence
that actively manages the LED light source so that constant lumen output is maintained over the system
life, preventing the energy waste created by the traditional practice of over-lighting.
Step-level dimming option allows system to be switched to 50% power for compliance with common
energy codes while maintaining fixture appearance.
Driver disconnect provided where required to comply with US and Canadian codes.
INSTALLATION — Unique grid interfacing arrangement provides mounting into standard 1" and 9/16"
tee bar or screw slot grids. 9/16" allows fixture trim to hang level with architectural ceiling tiles. Drywall
ceiling adaptors available. Suitable for damp location.
LISTINGS — CSA certified to meet US and Canadian standards. IC rated. DesignLights Consortium® (DLC)
qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified
Products List at www.designlights.org/QPL to confirm which versions are qualified.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
ORDERING INFORMATION
Type:
A1
Catalog
Number
Vo
l
t
a
g
e
:
Ro
wI
n
f
o
r
ma
t
i
o
n
:
Notes
Co
l
o
r
s
/
Fi
n
i
s
h
e
s
:
Swi
t
c
h
i
n
go
p
t
i
o
n
s
:
Ce
i
l
i
n
gT
y
p
e
:
Su
s
p
e
n
s
i
o
nL
e
n
g
t
h
s
:
Sp
e
c
i
f
i
cDi
mmi
n
gBa
l
l
a
s
t
s
Ot
h
e
r
:
Type
(
i
f
r
e
q
u
i
r
e
d
)
:
FS Series
2FSL4
2' x 4'
LED
Stock Configurations
2FSL4 40L EZ1 LP835
2FSL4 40L EZ1 LP840
Example: 2FSL4 40L EZ1 LP835 N100
Lead times will vary depending on options selected. Consult with your sales representative.
2FSL4
Series
Air function
2FSL4 2X4 FSL
(blank) Static
H
Heat
removal
Lumens
30L
40L
48L
60L
72L
Lens
3000
40001
48001
60001
72001
1
Accessories: Order as separate catalog number.
2FS4 F916
DGA24
LED
Trim to adjust fixture mounting flush with
9/16" T-bar; for 2x4 fixture
Drywall ceiling adaptor , unit installation7
(blank) Satin
white
Voltage
(blank) MVOLT
347
3472
Driver
EZ1
eldoLED dims
to 1%, 0-10V
EZB eldoLED dims
to black,
0-10V
EDB eldoLED DALI3
EXB eldoLED DMX/
RDM3
SLD Step-level
dimming3,4
EXA1 Dims to 1%,
XPoint wireless enabled
EXAB Dims to dark,
XPoint wireless enabled
Color
temperature
LP830
LP835
LP840
LP850
3000 K
3500 K
4000 K
5000 K
Controls5
Options
(blank)
N80
EL7L
No controls
nlight® with 80%
lumen management
N80EMG nlight® with 80%
lumen management. For use
with generator
supply EM power.
N100
nlight® without
lumen management
N100EMG nlight® without
lumen management. For use
with generator
supply EM power.
700 lumen
battery pack
EL14L
1400 lumen
battery pack
CP
Chicago
plenum
PWS1836 6' prewire,
3/8" diameter,
18-gauge,
1-circuit
PWS1846 6' prewire,
3/8" diameter,
18-gauge,
2-circuit
RRL_
RELOC®-ready
luminaire6
NPLT
Narrow pallet
Notes
1 Approximate lumen output.
2 Consult factory for availability. Not available with SLD, EL7L, or EL14L.
3 Not available with N80, N80EMG, N100 or N100EMG.
4 When using prewire option, use PWS1846.
5 nIO access limitations on 30L or EZB.
6 For ordering logic consult: RRL_2013.
7 When DGA kits are used, order 2FS4 F916 accessory.
2FSL4-2X4
Submitting Agency:
Description:
2FSL4 30L SLD PWS1836 LP840
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
Type:
A1
2FSL4 LED Recessed Lighting 2'x4'
Performance Data
Lumen package
Input watts 1
Lumens
LPW
30L LP830
30L LP835
30L LP840
30L LP850
40L LP830
40L LP835
40L LP840
40L LP850
48L LP830
48L LP835
48L LP840
48L LP850
60L LP830
60L LP835
60L LP840
60L LP850
72L LP830
72L LP835
72L LP840
72L LP850
30.7
30.8
30.9
31.0
39.2
39.4
39.5
39.6
46.2
46.4
46.6
46.7
52.0
52.2
52.4
52.5
69.5
70.0
70.2
70.3
3170
3341
3430
3664
3994
4247
4368
4637
4596
4856
4995
5347
5071
5373
5531
5867
6758
6847
7433
7823
103
108
111
118
102
108
111
117
100
105
107
115
98
103
106
112
97
98
106
111
PHOTOMETRICS
2FSL4 40L LP835, test no. LTL24699P5, tested in accordance to IESNA LM-79
90°
80°
200
400
60°
600
800
1000
1200
40°
1400
0°
20°
0°
CP Summary
0°
90
0° 1479 1479
5° 1469 1474
15° 1410 1415
25° 1297 1311
35° 1143 1162
978
45° 959
768
55° 749
545
65° 523
316
75° 293
103
85° 84
5
3
90
Coefficients of Utilization
pf
20%
pc
80%
70%
50%
pw 70%50%30% 50%30%10% 50%30%10%
0 119 119 119 116 116 116 111 111 111
1 108 103 99 101 97 93
97 93 90
2 98 90 83
88 81 76
84 79 74
3 90 79 70
77 69 63
74 68 62
4 82 70 61
68 60 54
66 59 53
5 75 62 53
61 52 46
59 51 46
6 69 56 47
55 46 40
53 46 40
7 64 51 42
50 41 36
48 41 35
8 60 46 38
46 37 32
44 37 31
9 56 42 34
42 34 29
41 33 28
10 53 39 31
39 31 26
38 31 26
RCR
180°
Zonal Lumen Summary
Zone
Lumens % Lamp % Fixture
0° - 30°
1141
26.9
26.9
0° - 40°
1864
43.9
43.9
0° - 60°
3292
77.5
77.5
0° - 90°
4248
100.0
100.0
90° - 180°
0
0.0
0.0
0° - 180°
4248
100.0
100.0
90°
2FSL4 48L LP835, test no. LTL24699P9, tested in accordance to IESNA LM-79
90°
80°
300
600
60°
900
1200
40°
1500
0°
20°
0°
CP Summary
0°
90
0° 1691 1691
5° 1679 1685
15° 1612 1618
25° 1483 1498
35° 1307 1328
45° 1097 1118
878
55° 856
624
65° 597
362
75° 336
118
85° 97
6
3
90
Coefficients of Utilization
pf
20%
pc
80%
70%
50%
pw 70%50%30% 50%30%10% 50%30%10%
0 119 119 119 116 116 116 111 111 111
1 108 103 99 101 97 93
97 93 90
2 98 90 83
88 81 76
84 79 74
3 90 79 70
77 69 63
74 68 62
4 82 70 61
68 60 54
66 59 53
5 75 62 53
61 52 46
59 51 46
6 69 56 47
55 46 40
53 46 40
7 64 51 42
50 41 36
48 41 35
8 60 46 38
46 37 32
44 37 31
9 56 42 34
42 34 29
41 33 28
10 53 39 31
39 31 26
38 31 26
RCR
180°
Zonal Lumen Summary
Zone
Lumens % Lamp % Fixture
0° - 30°
1304
26.9
26.9
0° - 40°
2131
43.9
43.9
0° - 60°
3763
77.5
77.5
0° - 90°
4857
100.0
100.0
90° - 180°
0
0.0
0.0
0° - 180°
4857
100.0
100.0
90°
2FSL4-2X4
LED: One Lithonia Way Conyers, GA 30012
Phone: 800-858-7763
Fax: 770-929-8789
www.lithonia.com
© 2014-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/11/15
Submitting Agency:
Description:
2FSL4 30L SLD PWS1836 LP840
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
Type:
A1
2FSL4 LED Recessed Lighting 2'x4'
MOUNTING DATA
DIMENSIONS
All dimensions are inches (centimeters) unless otherwise specified.
9/16
15/16
4-3/8
(11.1)
Specifications
Length: 48 (122.0)
Width: 24 (61.0)
Depth: 4-3/8 (11.1)
9/16
with accessory 2FS4 F916
15-3/4
(40)
24
(61)
SS
nLight® Control Accessories:
Order as separate catalog number. Visit www.sensorswitch.com/nLight for complete listing of nLight controls.
WallPod stations
On/Off
On/Off & Raise/Lower
Graphic Touchscreen
Photocell controls
On/Off & Dimming
Model number
nPODM [color]
nPODM DX [color]
nPOD GFX [color]
Model number
nCM ADCX
Occupancy sensors
Small motion 360°, ceiling (PIR / dual tech)
Large motion 360°, ceiling (PIR / dual tech)
Wide view (PIR / dual tech)
Wall Switch w/ Raise/Lower (PIR / dual tech)
Cat-5 cables (plenum rated)
10', CAT5 10FT
15', CAT5 15FT
Model number
nCM 9 / nCM PDT 9
nCM 10 / nCM PDT 10
nWV 16 / nWV PDT 16
nWSX LV DX / nWSX PDT LV DX
Model number
CAT5 10FT J1
CAT5 15FT J1
Constant Lumen Management
Enabled by the embedded nLight control, the FSL actively tracks its run-time and manages its light source such that constant lumen output is maintained over the system life. Referred
to as lumen management, this feature eliminates the energy waste created by the traditional practice of over-lighting.
Without Lumen Management
With Lumen Management
Energy is wasted and light level is inconsistent.
Energy is saved and light level remains consistent.
100%
46W
100%
46W
37W
50
80%
POWER
INPUT
POWER INPUT
LIGHT
OUTPUT
LIGHT OUTPUT
Saved Energy
POWER INPUT
LIGHT OUTPUT
POWER INPUT
Wasted Energy
LIGHT OUTPUT
80%
0
10
20
THOUSAND OPERATING HOURS
30
40
0
10
20
THOUSAND OPERATING HOURS
30
40
37W
50
Notes
With nlight 80% lumen management input watts start at 37 and gradually increasing to 46 at 50,000 hrs when using 48L system.
2FSL4-2X4
LED: One Lithonia Way Conyers, GA 30012
Phone: 800-858-7763
Fax: 770-929-8789
www.lithonia.com
© 2014-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/11/15
Submitting Agency:
Description:
2FSL4 30L SLD EL7L PWS1846 LP840
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
Catalog
Number
Vo
l
t
a
g
e
:
INTENDED USE — The FS Series recessed LED luminaire combines modern aesthetics and
performance in a general lighting product that enables the transformation from fluorescent to
LED. The high efficacy light engine delivers long life and excellent color to ensure a quality lighting
installation. Integrated controls options provide for design flexibility and optimum energy savings.
Multiple lumen packages and driver options provide solutions for all your lighting applications.
Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic
Environmental Compatibility table for suitable uses.
CONSTRUCTION — Rugged, one-piece cold-rolled steel coated polyester, painted after fabrication. The
satin white lens provides excellent shielding and wide distribution. End plates include integral T-bar clips.
Fixture may be mounted and wired in continuous rows. Total fixture height is only 4-3/8".
ELECTRICAL — Long-life LEDs, coupled with high-efficiency drivers, provide superior illumination for
extended service life. 90% LED lumen maintenance at 60,000 hours (L90/60,000). The LEDs have a CRI of 82.
eldoLED driver options deliver choice of dimming range, and choices for control, while assuring flicker-free,
low-current inrush, 89% efficiency and low EMI.
Optional integrated nLight® controls make each luminaire addressable - allowing it to digitally
communicate with other nLight enabled controls such as dimmers, switches, occupancy sensors and
photocontrols. Simply connect all the nLight enabled control devices and the FSL luminaires using standard
CAT-5 cabling. Unique plug-and-play convenience allows devices and luminaires to automatically discover
each other and self-commission.
Lumen Management: Unique lumen management system (option N80) provides onboard intelligence
that actively manages the LED light source so that constant lumen output is maintained over the system
life, preventing the energy waste created by the traditional practice of over-lighting.
Step-level dimming option allows system to be switched to 50% power for compliance with common
energy codes while maintaining fixture appearance.
Driver disconnect provided where required to comply with US and Canadian codes.
INSTALLATION — Unique grid interfacing arrangement provides mounting into standard 1" and 9/16"
tee bar or screw slot grids. 9/16" allows fixture trim to hang level with architectural ceiling tiles. Drywall
ceiling adaptors available. Suitable for damp location.
LISTINGS — CSA certified to meet US and Canadian standards. IC rated. DesignLights Consortium® (DLC)
qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified
Products List at www.designlights.org/QPL to confirm which versions are qualified.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
ORDERING INFORMATION
A1E
Ro
wI
n
f
o
r
ma
t
i
o
n
:
Notes
Co
l
o
r
s
/
Fi
n
i
s
h
e
s
:
FEATURES & SPECIFICATIONS
Type:
Swi
t
c
h
i
n
go
p
t
i
o
n
s
:
Ce
i
l
i
n
gT
y
p
e
:
Su
s
p
e
n
s
i
o
nL
e
n
g
t
h
s
:
Sp
e
c
i
f
i
cDi
mmi
n
gBa
l
l
a
s
t
s
Ot
h
e
r
:
Type
(
i
f
r
e
q
u
i
r
e
d
)
:
FS Series
2FSL4
2' x 4'
LED
Stock Configurations
2FSL4 40L EZ1 LP835
2FSL4 40L EZ1 LP840
Example: 2FSL4 40L EZ1 LP835 N100
Lead times will vary depending on options selected. Consult with your sales representative.
2FSL4
Series
Air function
2FSL4 2X4 FSL
(blank) Static
H
Heat
removal
Lumens
30L
40L
48L
60L
72L
Lens
3000
40001
48001
60001
72001
1
Accessories: Order as separate catalog number.
2FS4 F916
DGA24
LED
Trim to adjust fixture mounting flush with
9/16" T-bar; for 2x4 fixture
Drywall ceiling adaptor , unit installation7
(blank) Satin
white
Voltage
(blank) MVOLT
347
3472
Driver
EZ1
eldoLED dims
to 1%, 0-10V
EZB eldoLED dims
to black,
0-10V
EDB eldoLED DALI3
EXB eldoLED DMX/
RDM3
SLD Step-level
dimming3,4
EXA1 Dims to 1%,
XPoint wireless enabled
EXAB Dims to dark,
XPoint wireless enabled
Color
temperature
LP830
LP835
LP840
LP850
3000 K
3500 K
4000 K
5000 K
Controls5
Options
(blank)
N80
EL7L
No controls
nlight® with 80%
lumen management
N80EMG nlight® with 80%
lumen management. For use
with generator
supply EM power.
N100
nlight® without
lumen management
N100EMG nlight® without
lumen management. For use
with generator
supply EM power.
700 lumen
battery pack
EL14L
1400 lumen
battery pack
CP
Chicago
plenum
PWS1836 6' prewire,
3/8" diameter,
18-gauge,
1-circuit
PWS1846 6' prewire,
3/8" diameter,
18-gauge,
2-circuit
RRL_
RELOC®-ready
luminaire6
NPLT
Narrow pallet
Notes
1 Approximate lumen output.
2 Consult factory for availability. Not available with SLD, EL7L, or EL14L.
3 Not available with N80, N80EMG, N100 or N100EMG.
4 When using prewire option, use PWS1846.
5 nIO access limitations on 30L or EZB.
6 For ordering logic consult: RRL_2013.
7 When DGA kits are used, order 2FS4 F916 accessory.
2FSL4-2X4
Submitting Agency:
Description:
2FSL4 30L SLD EL7L PWS1846 LP840
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
Type:
A1E
2FSL4 LED Recessed Lighting 2'x4'
Performance Data
Lumen package
Input watts 1
Lumens
LPW
30L LP830
30L LP835
30L LP840
30L LP850
40L LP830
40L LP835
40L LP840
40L LP850
48L LP830
48L LP835
48L LP840
48L LP850
60L LP830
60L LP835
60L LP840
60L LP850
72L LP830
72L LP835
72L LP840
72L LP850
30.7
30.8
30.9
31.0
39.2
39.4
39.5
39.6
46.2
46.4
46.6
46.7
52.0
52.2
52.4
52.5
69.5
70.0
70.2
70.3
3170
3341
3430
3664
3994
4247
4368
4637
4596
4856
4995
5347
5071
5373
5531
5867
6758
6847
7433
7823
103
108
111
118
102
108
111
117
100
105
107
115
98
103
106
112
97
98
106
111
PHOTOMETRICS
2FSL4 40L LP835, test no. LTL24699P5, tested in accordance to IESNA LM-79
90°
80°
200
400
60°
600
800
1000
1200
40°
1400
0°
20°
0°
CP Summary
0°
90
0° 1479 1479
5° 1469 1474
15° 1410 1415
25° 1297 1311
35° 1143 1162
978
45° 959
768
55° 749
545
65° 523
316
75° 293
103
85° 84
5
3
90
Coefficients of Utilization
pf
20%
pc
80%
70%
50%
pw 70%50%30% 50%30%10% 50%30%10%
0 119 119 119 116 116 116 111 111 111
1 108 103 99 101 97 93
97 93 90
2 98 90 83
88 81 76
84 79 74
3 90 79 70
77 69 63
74 68 62
4 82 70 61
68 60 54
66 59 53
5 75 62 53
61 52 46
59 51 46
6 69 56 47
55 46 40
53 46 40
7 64 51 42
50 41 36
48 41 35
8 60 46 38
46 37 32
44 37 31
9 56 42 34
42 34 29
41 33 28
10 53 39 31
39 31 26
38 31 26
RCR
180°
Zonal Lumen Summary
Zone
Lumens % Lamp % Fixture
0° - 30°
1141
26.9
26.9
0° - 40°
1864
43.9
43.9
0° - 60°
3292
77.5
77.5
0° - 90°
4248
100.0
100.0
90° - 180°
0
0.0
0.0
0° - 180°
4248
100.0
100.0
90°
2FSL4 48L LP835, test no. LTL24699P9, tested in accordance to IESNA LM-79
90°
80°
300
600
60°
900
1200
40°
1500
0°
20°
0°
CP Summary
0°
90
0° 1691 1691
5° 1679 1685
15° 1612 1618
25° 1483 1498
35° 1307 1328
45° 1097 1118
878
55° 856
624
65° 597
362
75° 336
118
85° 97
6
3
90
Coefficients of Utilization
pf
20%
pc
80%
70%
50%
pw 70%50%30% 50%30%10% 50%30%10%
0 119 119 119 116 116 116 111 111 111
1 108 103 99 101 97 93
97 93 90
2 98 90 83
88 81 76
84 79 74
3 90 79 70
77 69 63
74 68 62
4 82 70 61
68 60 54
66 59 53
5 75 62 53
61 52 46
59 51 46
6 69 56 47
55 46 40
53 46 40
7 64 51 42
50 41 36
48 41 35
8 60 46 38
46 37 32
44 37 31
9 56 42 34
42 34 29
41 33 28
10 53 39 31
39 31 26
38 31 26
RCR
180°
Zonal Lumen Summary
Zone
Lumens % Lamp % Fixture
0° - 30°
1304
26.9
26.9
0° - 40°
2131
43.9
43.9
0° - 60°
3763
77.5
77.5
0° - 90°
4857
100.0
100.0
90° - 180°
0
0.0
0.0
0° - 180°
4857
100.0
100.0
90°
2FSL4-2X4
LED: One Lithonia Way Conyers, GA 30012
Phone: 800-858-7763
Fax: 770-929-8789
www.lithonia.com
© 2014-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/11/15
Submitting Agency:
Description:
2FSL4 30L SLD EL7L PWS1846 LP840
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
Type:
A1E
2FSL4 LED Recessed Lighting 2'x4'
MOUNTING DATA
DIMENSIONS
All dimensions are inches (centimeters) unless otherwise specified.
9/16
15/16
4-3/8
(11.1)
Specifications
Length: 48 (122.0)
Width: 24 (61.0)
Depth: 4-3/8 (11.1)
9/16
with accessory 2FS4 F916
15-3/4
(40)
24
(61)
SS
nLight® Control Accessories:
Order as separate catalog number. Visit www.sensorswitch.com/nLight for complete listing of nLight controls.
WallPod stations
On/Off
On/Off & Raise/Lower
Graphic Touchscreen
Photocell controls
On/Off & Dimming
Model number
nPODM [color]
nPODM DX [color]
nPOD GFX [color]
Model number
nCM ADCX
Occupancy sensors
Small motion 360°, ceiling (PIR / dual tech)
Large motion 360°, ceiling (PIR / dual tech)
Wide view (PIR / dual tech)
Wall Switch w/ Raise/Lower (PIR / dual tech)
Cat-5 cables (plenum rated)
10', CAT5 10FT
15', CAT5 15FT
Model number
nCM 9 / nCM PDT 9
nCM 10 / nCM PDT 10
nWV 16 / nWV PDT 16
nWSX LV DX / nWSX PDT LV DX
Model number
CAT5 10FT J1
CAT5 15FT J1
Constant Lumen Management
Enabled by the embedded nLight control, the FSL actively tracks its run-time and manages its light source such that constant lumen output is maintained over the system life. Referred
to as lumen management, this feature eliminates the energy waste created by the traditional practice of over-lighting.
Without Lumen Management
With Lumen Management
Energy is wasted and light level is inconsistent.
Energy is saved and light level remains consistent.
100%
46W
100%
46W
37W
50
80%
POWER
INPUT
POWER INPUT
LIGHT
OUTPUT
LIGHT OUTPUT
Saved Energy
POWER INPUT
LIGHT OUTPUT
POWER INPUT
Wasted Energy
LIGHT OUTPUT
80%
0
10
20
THOUSAND OPERATING HOURS
30
40
0
10
20
THOUSAND OPERATING HOURS
30
40
37W
50
Notes
With nlight 80% lumen management input watts start at 37 and gradually increasing to 46 at 50,000 hrs when using 48L system.
2FSL4-2X4
LED: One Lithonia Way Conyers, GA 30012
Phone: 800-858-7763
Fax: 770-929-8789
www.lithonia.com
© 2014-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/11/15
Submitting Agency:
Description:
2FSL2 20L SLD PWS1836 LP840
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
Type:
A2
Catalog
Number
FEATURES & SPECIFICATIONS
INTENDED USE — The FS Series recessed LED luminaire combines modern aesthetics and
performance in a general lighting product that enables the transformation from fluorescent to
LED. The high efficacy light engine delivers long life and excellent color to ensure a quality lighting
installation. Integrated controls options provide for design flexibility and optimum energy savings.
Multiple lumen packages and driver options provide solutions for all your lighting applications.
Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic
Environmental Compatibility table for suitable uses.
CONSTRUCTION — Rugged, one-piece cold-rolled steel coated polyester, painted after fabrication. The
satin white lens provides excellent shielding and wide distribution. End plates include integral T-bar clips.
Fixture may be mounted and wired in continuous rows. Total fixture height is only 4-3/8".
ELECTRICAL — Long-life LEDs, coupled with high-efficiency drivers, provide superior illumination for
extended service life. 90% LED lumen maintenance at 60,000 hours (L90/60,000).
eldoLED driver options deliver choice of dimming range, and choices for control, while assuring flicker-free,
low-current inrush, 89% efficiency and low EMI.
Optional integrated nLight® controls make each luminaire addressable - allowing it to digitally
communicate with other nLight enabled controls such as dimmers, switches, occupancy sensors and
photocontrols. Simply connect all the nLight enabled control devices and the FSL luminaires using standard
CAT-5 cabling. Unique plug-and-play convenience allows devices and luminaires to automatically discover
each other and self-commission.
Lumen Management: Unique lumen management system (option N80) provides onboard intelligence
that actively manages the LED light source so that constant lumen output is maintained over the system
life, preventing the energy waste created by the traditional practice of over-lighting.
Step-level dimming option allows system to be switched to 50% power for compliance with common
energy codes while maintaining fixture appearance.
Driver disconnect provided where required to comply with US and Canadian codes.
INSTALLATION — Unique grid interfacing arrangement provides mounting into standard 1" and 9/16"
tee bar or screw slot grids. 9/16" allows fixture trim to hang level with architectural ceiling tiles. Drywall
ceiling adaptors available. Suitable for damp location.
LISTINGS — CSA certified to meet US and Canadian standards. IC rated. DesignLights Consortium® (DLC)
qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified
Products List at www.designlights.org/QPL to confirm which versions are qualified.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
ORDERING INFORMATION
Vo
l
t
a
g
e
:
Ro
wI
n
f
o
r
ma
t
i
o
n
:
Co
l
o
r
s
/
Fi
n
i
s
h
e
s
:
Swi
t
c
h
i
n
go
p
t
i
o
n
s
:
Ce
i
l
i
n
gT
y
p
e
:
Su
s
p
e
n
s
i
o
nL
e
n
g
t
h
s
:
Sp
e
c
i
f
i
cDi
mmi
n
gBa
l
l
a
s
t
s
Ot
h
e
r
:
Notes
Type
(
i
f
r
e
q
u
i
r
e
d
)
:
FS Series
2FSL2
2' x 2'
LED
Stock Configurations
2FSL2 33L EZ1 LP835
2FSL2 33L EZ1 LP840
Example: 2FSL2 20L EZ1 LP835 N100
Lead times will vary depending on options selected. Consult with your sales representative.
2FSL2
Series
Air function
2FSL2 2X2 FSL
(blank) Static
H
Heat
removal
Lumens
20L 20001
33L 33001
40L 40001
Accessories: Order as separate catalog number.
2FS2 F916
DGA22
LED
Trim to adjust fixture mounting flush with
9/16" T-bar; for 2x2 fixture
Drywall ceiling adaptor , unit installation7
Lens
(blank) Satin
white
Voltage
(blank) MVOLT
347
3472
Driver
EZ1
eldoLED dims
to 1%, 0-10V
EZB eldoLED dims
to black,
0-10V
EDB eldoLED DALI3
EXB eldoLED
DMX/RDM3
SLD Step-level
dimming3,4
EXA1 Dims to 1%,
XPoint wireless enabled
EXAB Dims to dark,
XPoint wireless enabled
Color
temperature
LP830
LP835
LP840
LP850
3000 K
3500 K
4000 K
5000 K
Controls5
Options
(blank)
N80
EL7L
No controls
nlight® with 80%
lumen management
N80EMG nlight® with 80%
lumen management. For use with
generator supply
EM power.
N100
nlight® without lumen management
N100EMG nlight® without
lumen management. For use with
generator supply
EM power.
700 lumen
battery pack
EL14L
1400 lumen
battery pack
CP
Chicago
plenum
PWS1836 6' prewire,
3/8" diameter,
18-gauge,
1-circuit
PWS1846 6' prewire,
3/8" diameter,
18-gauge,
2-circuit
RRL_
RELOC®-ready
luminaire6
NPLT
Narrow pallet
Notes
1 Approximate lumen output.
2 Consult factory for availability. Not available with SLD, EL7L, or EL14L.
3 Not available with N80, N80EMG, N100 or N100EMG.
4 When using prewire option, use PWS1846.
5 nIO access limitations with 20L or EZB.
6 For ordering logic consult: RRL_2013.
7 When DGA kits are used, order 2FS2 F916 accessory.
2FSL2-2X2
Submitting Agency:
Description:
2FSL2 20L SLD PWS1836 LP840
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
Type:
A2
2FSL2 LED Recessed Lighting 2'x2'
Performance Data
Lumen package
Input watts 1
Lumens
LPW
20L LP830
20L LP835
20L LP840
20L LP850
33L LP830
33L LP835
33L LP840
33L LP850
40L LP830
40L LP835
40L LP840
40L LP850
20.4
20.4
20.5
20.5
34.4
34.6
34.7
34.9
41.7
41.9
42.1
41.2
2048
2134
2196
2333
3318
3544
3626
3839
3857
4127
4209
4502
100
105
107
114
96
103
105
110
93
99
100
109
PHOTOMETRICS
2FSL2 33L LP835, test no. LTL24691P5, tested in accordance to IESNA LM-79
90°
80°
200
400
60°
600
800
1000
40°
1200
0°
20°
0°
CP Summary
0°
90
0° 1240 1240
5° 1228 1237
15° 1178 1190
25° 1080 1100
979
35° 948
827
45° 792
650
55° 619
465
65° 434
268
75° 246
87
85° 74
3
3
90
Coefficients of Utilization
pf
20%
pc
80%
70%
50%
pw 70%50%30% 50%30%10% 50%30%10%
0 119 119 119 116 116 116 111 111 111
1 108 103 99 101 97 93
97 93 90
2 98 90 83
88 81 76
84 79 74
3 90 79 70
77 69 63
74 68 62
4 82 70 61
68 60 54
66 59 53
5 75 62 53
61 53 46
59 51 46
6 69 56 47
55 46 40
53 46 40
7 64 51 42
50 42 36
48 41 35
8 60 46 38
46 37 32
44 37 31
9 56 42 34
42 34 29
41 33 28
10 53 39 31
39 31 26
38 31 26
RCR
180°
Zonal Lumen Summary
Zone
Lumens % Lamp % Fixture
0° - 30°
953
26.9
26.9
0° - 40°
1556
43.9
43.9
0° - 60°
2746
77.5
77.5
0° - 90°
3545
100.0
100.0
90° - 180°
0
0.0
0.0
0° - 180°
3545
100.0
100.0
90°
2FSL2 40L LP835, test no. LTL24691P9, tested in accordance to IESNA LM-79
90°
80°
200
400
60°
600
800
1000
1200
40°
1400
0°
20°
0°
CP Summary
0°
90
0° 1445 1445
5° 1431 1441
15° 1372 1386
25° 1257 1282
35° 1104 1140
963
45° 923
758
55° 721
542
65° 506
312
75° 286
101
85° 87
4
4
90
Coefficients of Utilization
pf
20%
pc
80%
70%
50%
pw 70%50%30% 50%30%10% 50%30%10%
0 119 119 119 116 116 116 111 111 111
1 108 103 99 101 97 93
97 93 90
2 98 90 83
88 81 76
84 79 74
3 90 79 70
77 69 63
74 68 62
4 82 70 61
68 60 54
66 59 53
5 75 62 53
61 53 46
59 51 46
6 69 56 47
55 46 40
53 46 40
7 64 51 42
50 42 36
48 41 35
8 60 46 38
46 37 32
44 37 31
9 56 42 34
42 34 29
41 33 28
10 53 39 31
39 31 26
38 31 26
RCR
180°
Zonal Lumen Summary
Zone
Lumens % Lamp % Fixture
0° - 30°
1110
26.9
26.9
0° - 40°
1812
43.9
43.9
0° - 60°
3198
77.5
77.5
0° - 90°
4129
100.0
100.0
90° - 180°
0
0.0
0.0
0° - 180°
4129
100.0
100.0
90°
2FSL2-2X2
LED: One Lithonia Way Conyers, GA 30012
Phone: 800-858-7763
Fax: 770-929-8789
www.lithonia.com
© 2014-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/11/15
Submitting Agency:
Description:
2FSL2 20L SLD PWS1836 LP840
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
Type:
A2
2FSL2 LED Recessed Lighting 2'x2'
MOUNTING DATA
DIMENSIONS
All dimensions are inches (centimeters) unless otherwise specified.
9/16
15/16
Specifications
Length: 24 (61.0)
Width: 24 (61.0)
Depth: 4-3/8 (11.1)
9/16
with accessory 2FS2 F916
4-3/8
(11.1)
15-3/4
(40)
24
(61)
SS
nLight® Control Accessories:
Order as separate catalog number. Visit www.sensorswitch.com/nLight for complete listing of nLight controls.
WallPod stations
On/Off
On/Off & Raise/Lower
Graphic Touchscreen
Photocell controls
On/Off & Dimming
Model number
nPODM [color]
nPODM DX [color]
nPOD GFX [color]
Model number
nCM ADCX
Occupancy sensors
Small motion 360°, ceiling (PIR / dual tech)
Large motion 360°, ceiling (PIR / dual tech)
Wide view (PIR / dual tech)
Wall Switch w/ Raise/Lower (PIR / dual tech)
Cat-5 cable (plenum rated)
10', CAT5 10FT
15', CAT5 15FT
Model number
nCM 9 / nCM PDT 9
nCM 10 / nCM PDT 10
nWV 16 / nWV PDT 16
nWSX LV DX / nWSX PDT LV DX
Model number
CAT5 10FT J1
CAT5 15FT J1
Constant Lumen Management
Enabled by the embedded nLight control, the FSL actively tracks its run-time and manages its light source such that constant lumen output is maintained over the system life. Referred to as
lumen management, this feature eliminates the energy waste created by the traditional practice of over-lighting.
Without Lumen Management
With Lumen Management
Energy is wasted and light level is inconsistent.
Energy is saved and light level remains consistent.
100%
35W
100%
35W
28W
50
80%
POWER
INPUT
POWER INPUT
LIGHT
OUTPUT
LIGHT OUTPUT
Saved Energy
POWER INPUT
LIGHT OUTPUT
POWER INPUT
Wasted Energy
LIGHT OUTPUT
80%
0
10
20
THOUSAND OPERATING HOURS
30
40
0
10
20
THOUSAND OPERATING HOURS
30
40
28W
50
Notes
With nlight 80% lumen management input watts start at 28 and gradually increasing to 35 at 50,000 hrs when using 33L system.
2FSL2-2X2
LED: One Lithonia Way Conyers, GA 30012
Phone: 800-858-7763
Fax: 770-929-8789
www.lithonia.com
© 2014-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/11/15
Submitting Agency:
Description:
2FSL2 20L SLD EL7L PWS1846 LP840
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
Catalog
Number
INTENDED USE — The FS Series recessed LED luminaire combines modern aesthetics and
performance in a general lighting product that enables the transformation from fluorescent to
LED. The high efficacy light engine delivers long life and excellent color to ensure a quality lighting
installation. Integrated controls options provide for design flexibility and optimum energy savings.
Multiple lumen packages and driver options provide solutions for all your lighting applications.
Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic
Environmental Compatibility table for suitable uses.
CONSTRUCTION — Rugged, one-piece cold-rolled steel coated polyester, painted after fabrication. The
satin white lens provides excellent shielding and wide distribution. End plates include integral T-bar clips.
Fixture may be mounted and wired in continuous rows. Total fixture height is only 4-3/8".
ELECTRICAL — Long-life LEDs, coupled with high-efficiency drivers, provide superior illumination for
extended service life. 90% LED lumen maintenance at 60,000 hours (L90/60,000).
eldoLED driver options deliver choice of dimming range, and choices for control, while assuring flicker-free,
low-current inrush, 89% efficiency and low EMI.
Optional integrated nLight® controls make each luminaire addressable - allowing it to digitally
communicate with other nLight enabled controls such as dimmers, switches, occupancy sensors and
photocontrols. Simply connect all the nLight enabled control devices and the FSL luminaires using standard
CAT-5 cabling. Unique plug-and-play convenience allows devices and luminaires to automatically discover
each other and self-commission.
Lumen Management: Unique lumen management system (option N80) provides onboard intelligence
that actively manages the LED light source so that constant lumen output is maintained over the system
life, preventing the energy waste created by the traditional practice of over-lighting.
Step-level dimming option allows system to be switched to 50% power for compliance with common
energy codes while maintaining fixture appearance.
Driver disconnect provided where required to comply with US and Canadian codes.
INSTALLATION — Unique grid interfacing arrangement provides mounting into standard 1" and 9/16"
tee bar or screw slot grids. 9/16" allows fixture trim to hang level with architectural ceiling tiles. Drywall
ceiling adaptors available. Suitable for damp location.
LISTINGS — CSA certified to meet US and Canadian standards. IC rated. DesignLights Consortium® (DLC)
qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified
Products List at www.designlights.org/QPL to confirm which versions are qualified.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
ORDERING INFORMATION
A2E
Vo
l
t
a
g
e
:
Ro
wI
n
f
o
r
ma
t
i
o
n
:
Co
l
o
r
s
/
Fi
n
i
s
h
e
s
:
Swi
t
c
h
i
n
go
p
t
i
o
n
s
:
Ce
i
l
i
n
gT
y
p
e
:
Su
s
p
e
n
s
i
o
nL
e
n
g
t
h
s
:
Sp
e
c
i
f
i
cDi
mmi
n
gBa
l
l
a
s
t
s
Ot
h
e
r
:
Notes
FEATURES & SPECIFICATIONS
Type:
Type
(
i
f
r
e
q
u
i
r
e
d
)
:
FS Series
2FSL2
2' x 2'
LED
Stock Configurations
2FSL2 33L EZ1 LP835
2FSL2 33L EZ1 LP840
Example: 2FSL2 20L EZ1 LP835 N100
Lead times will vary depending on options selected. Consult with your sales representative.
2FSL2
Series
Air function
2FSL2 2X2 FSL
(blank) Static
H
Heat
removal
Lumens
20L 20001
33L 33001
40L 40001
Accessories: Order as separate catalog number.
2FS2 F916
DGA22
LED
Trim to adjust fixture mounting flush with
9/16" T-bar; for 2x2 fixture
Drywall ceiling adaptor , unit installation7
Lens
(blank) Satin
white
Voltage
(blank) MVOLT
347
3472
Driver
EZ1
eldoLED dims
to 1%, 0-10V
EZB eldoLED dims
to black,
0-10V
EDB eldoLED DALI3
EXB eldoLED
DMX/RDM3
SLD Step-level
dimming3,4
EXA1 Dims to 1%,
XPoint wireless enabled
EXAB Dims to dark,
XPoint wireless enabled
Color
temperature
LP830
LP835
LP840
LP850
3000 K
3500 K
4000 K
5000 K
Controls5
Options
(blank)
N80
EL7L
No controls
nlight® with 80%
lumen management
N80EMG nlight® with 80%
lumen management. For use with
generator supply
EM power.
N100
nlight® without lumen management
N100EMG nlight® without
lumen management. For use with
generator supply
EM power.
700 lumen
battery pack
EL14L
1400 lumen
battery pack
CP
Chicago
plenum
PWS1836 6' prewire,
3/8" diameter,
18-gauge,
1-circuit
PWS1846 6' prewire,
3/8" diameter,
18-gauge,
2-circuit
RRL_
RELOC®-ready
luminaire6
NPLT
Narrow pallet
Notes
1 Approximate lumen output.
2 Consult factory for availability. Not available with SLD, EL7L, or EL14L.
3 Not available with N80, N80EMG, N100 or N100EMG.
4 When using prewire option, use PWS1846.
5 nIO access limitations with 20L or EZB.
6 For ordering logic consult: RRL_2013.
7 When DGA kits are used, order 2FS2 F916 accessory.
2FSL2-2X2
Submitting Agency:
Description:
2FSL2 20L SLD EL7L PWS1846 LP840
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
Type:
A2E
2FSL2 LED Recessed Lighting 2'x2'
Performance Data
Lumen package
Input watts 1
Lumens
LPW
20L LP830
20L LP835
20L LP840
20L LP850
33L LP830
33L LP835
33L LP840
33L LP850
40L LP830
40L LP835
40L LP840
40L LP850
20.4
20.4
20.5
20.5
34.4
34.6
34.7
34.9
41.7
41.9
42.1
41.2
2048
2134
2196
2333
3318
3544
3626
3839
3857
4127
4209
4502
100
105
107
114
96
103
105
110
93
99
100
109
PHOTOMETRICS
2FSL2 33L LP835, test no. LTL24691P5, tested in accordance to IESNA LM-79
90°
80°
200
400
60°
600
800
1000
40°
1200
0°
20°
0°
CP Summary
0°
90
0° 1240 1240
5° 1228 1237
15° 1178 1190
25° 1080 1100
979
35° 948
827
45° 792
650
55° 619
465
65° 434
268
75° 246
87
85° 74
3
3
90
Coefficients of Utilization
pf
20%
pc
80%
70%
50%
pw 70%50%30% 50%30%10% 50%30%10%
0 119 119 119 116 116 116 111 111 111
1 108 103 99 101 97 93
97 93 90
2 98 90 83
88 81 76
84 79 74
3 90 79 70
77 69 63
74 68 62
4 82 70 61
68 60 54
66 59 53
5 75 62 53
61 53 46
59 51 46
6 69 56 47
55 46 40
53 46 40
7 64 51 42
50 42 36
48 41 35
8 60 46 38
46 37 32
44 37 31
9 56 42 34
42 34 29
41 33 28
10 53 39 31
39 31 26
38 31 26
RCR
180°
Zonal Lumen Summary
Zone
Lumens % Lamp % Fixture
0° - 30°
953
26.9
26.9
0° - 40°
1556
43.9
43.9
0° - 60°
2746
77.5
77.5
0° - 90°
3545
100.0
100.0
90° - 180°
0
0.0
0.0
0° - 180°
3545
100.0
100.0
90°
2FSL2 40L LP835, test no. LTL24691P9, tested in accordance to IESNA LM-79
90°
80°
200
400
60°
600
800
1000
1200
40°
1400
0°
20°
0°
CP Summary
0°
90
0° 1445 1445
5° 1431 1441
15° 1372 1386
25° 1257 1282
35° 1104 1140
963
45° 923
758
55° 721
542
65° 506
312
75° 286
101
85° 87
4
4
90
Coefficients of Utilization
pf
20%
pc
80%
70%
50%
pw 70%50%30% 50%30%10% 50%30%10%
0 119 119 119 116 116 116 111 111 111
1 108 103 99 101 97 93
97 93 90
2 98 90 83
88 81 76
84 79 74
3 90 79 70
77 69 63
74 68 62
4 82 70 61
68 60 54
66 59 53
5 75 62 53
61 53 46
59 51 46
6 69 56 47
55 46 40
53 46 40
7 64 51 42
50 42 36
48 41 35
8 60 46 38
46 37 32
44 37 31
9 56 42 34
42 34 29
41 33 28
10 53 39 31
39 31 26
38 31 26
RCR
180°
Zonal Lumen Summary
Zone
Lumens % Lamp % Fixture
0° - 30°
1110
26.9
26.9
0° - 40°
1812
43.9
43.9
0° - 60°
3198
77.5
77.5
0° - 90°
4129
100.0
100.0
90° - 180°
0
0.0
0.0
0° - 180°
4129
100.0
100.0
90°
2FSL2-2X2
LED: One Lithonia Way Conyers, GA 30012
Phone: 800-858-7763
Fax: 770-929-8789
www.lithonia.com
© 2014-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/11/15
Submitting Agency:
Description:
2FSL2 20L SLD EL7L PWS1846 LP840
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
Type:
A2E
2FSL2 LED Recessed Lighting 2'x2'
MOUNTING DATA
DIMENSIONS
All dimensions are inches (centimeters) unless otherwise specified.
9/16
15/16
Specifications
Length: 24 (61.0)
Width: 24 (61.0)
Depth: 4-3/8 (11.1)
9/16
with accessory 2FS2 F916
4-3/8
(11.1)
15-3/4
(40)
24
(61)
SS
nLight® Control Accessories:
Order as separate catalog number. Visit www.sensorswitch.com/nLight for complete listing of nLight controls.
WallPod stations
On/Off
On/Off & Raise/Lower
Graphic Touchscreen
Photocell controls
On/Off & Dimming
Model number
nPODM [color]
nPODM DX [color]
nPOD GFX [color]
Model number
nCM ADCX
Occupancy sensors
Small motion 360°, ceiling (PIR / dual tech)
Large motion 360°, ceiling (PIR / dual tech)
Wide view (PIR / dual tech)
Wall Switch w/ Raise/Lower (PIR / dual tech)
Cat-5 cable (plenum rated)
10', CAT5 10FT
15', CAT5 15FT
Model number
nCM 9 / nCM PDT 9
nCM 10 / nCM PDT 10
nWV 16 / nWV PDT 16
nWSX LV DX / nWSX PDT LV DX
Model number
CAT5 10FT J1
CAT5 15FT J1
Constant Lumen Management
Enabled by the embedded nLight control, the FSL actively tracks its run-time and manages its light source such that constant lumen output is maintained over the system life. Referred to as
lumen management, this feature eliminates the energy waste created by the traditional practice of over-lighting.
Without Lumen Management
With Lumen Management
Energy is wasted and light level is inconsistent.
Energy is saved and light level remains consistent.
100%
35W
100%
35W
28W
50
80%
POWER
INPUT
POWER INPUT
LIGHT
OUTPUT
LIGHT OUTPUT
Saved Energy
POWER INPUT
LIGHT OUTPUT
POWER INPUT
Wasted Energy
LIGHT OUTPUT
80%
0
10
20
THOUSAND OPERATING HOURS
30
40
0
10
20
THOUSAND OPERATING HOURS
30
40
28W
50
Notes
With nlight 80% lumen management input watts start at 28 and gradually increasing to 35 at 50,000 hrs when using 33L system.
2FSL2-2X2
LED: One Lithonia Way Conyers, GA 30012
Phone: 800-858-7763
Fax: 770-929-8789
www.lithonia.com
© 2014-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/11/15
Submitting Agency:
Description:
2FSL4 30L SLD PWS1836 LP840 DGA24
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
Catalog
Number
FEATURES & SPECIFICATIONS
INTENDED USE — The FS Series recessed LED luminaire combines modern aesthetics and
performance in a general lighting product that enables the transformation from fluorescent to
LED. The high efficacy light engine delivers long life and excellent color to ensure a quality lighting
installation. Integrated controls options provide for design flexibility and optimum energy savings.
Multiple lumen packages and driver options provide solutions for all your lighting applications.
Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic
Environmental Compatibility table for suitable uses.
CONSTRUCTION — Rugged, one-piece cold-rolled steel coated polyester, painted after fabrication. The
satin white lens provides excellent shielding and wide distribution. End plates include integral T-bar clips.
Fixture may be mounted and wired in continuous rows. Total fixture height is only 4-3/8".
ELECTRICAL — Long-life LEDs, coupled with high-efficiency drivers, provide superior illumination for
extended service life. 90% LED lumen maintenance at 60,000 hours (L90/60,000). The LEDs have a CRI of 82.
eldoLED driver options deliver choice of dimming range, and choices for control, while assuring flicker-free,
low-current inrush, 89% efficiency and low EMI.
Optional integrated nLight® controls make each luminaire addressable - allowing it to digitally
communicate with other nLight enabled controls such as dimmers, switches, occupancy sensors and
photocontrols. Simply connect all the nLight enabled control devices and the FSL luminaires using standard
CAT-5 cabling. Unique plug-and-play convenience allows devices and luminaires to automatically discover
each other and self-commission.
Lumen Management: Unique lumen management system (option N80) provides onboard intelligence
that actively manages the LED light source so that constant lumen output is maintained over the system
life, preventing the energy waste created by the traditional practice of over-lighting.
Step-level dimming option allows system to be switched to 50% power for compliance with common
energy codes while maintaining fixture appearance.
Driver disconnect provided where required to comply with US and Canadian codes.
INSTALLATION — Unique grid interfacing arrangement provides mounting into standard 1" and 9/16"
tee bar or screw slot grids. 9/16" allows fixture trim to hang level with architectural ceiling tiles. Drywall
ceiling adaptors available. Suitable for damp location.
LISTINGS — CSA certified to meet US and Canadian standards. IC rated. DesignLights Consortium® (DLC)
qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified
Products List at www.designlights.org/QPL to confirm which versions are qualified.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
ORDERING INFORMATION
Type:
B
Vo
l
t
a
g
e
:
Ro
wI
n
f
o
r
ma
t
i
o
n
:
Notes
Co
l
o
r
s
/
Fi
n
i
s
h
e
s
:
Swi
t
c
h
i
n
go
p
t
i
o
n
s
:
Ce
i
l
i
n
gT
y
p
e
:
Su
s
p
e
n
s
i
o
nL
e
n
g
t
h
s
:
Sp
e
c
i
f
i
cDi
mmi
n
gBa
l
l
a
s
t
s
Ot
h
e
r
:
Type
(
i
f
r
e
q
u
i
r
e
d
)
:
FS Series
2FSL4
2' x 4'
LED
Stock Configurations
2FSL4 40L EZ1 LP835
2FSL4 40L EZ1 LP840
Example: 2FSL4 40L EZ1 LP835 N100
Lead times will vary depending on options selected. Consult with your sales representative.
2FSL4
Series
Air function
2FSL4 2X4 FSL
(blank) Static
H
Heat
removal
Lumens
30L
40L
48L
60L
72L
Lens
3000
40001
48001
60001
72001
1
Accessories: Order as separate catalog number.
2FS4 F916
DGA24
LED
Trim to adjust fixture mounting flush with
9/16" T-bar; for 2x4 fixture
Drywall ceiling adaptor , unit installation7
(blank) Satin
white
Voltage
(blank) MVOLT
347
3472
Driver
EZ1
eldoLED dims
to 1%, 0-10V
EZB eldoLED dims
to black,
0-10V
EDB eldoLED DALI3
EXB eldoLED DMX/
RDM3
SLD Step-level
dimming3,4
EXA1 Dims to 1%,
XPoint wireless enabled
EXAB Dims to dark,
XPoint wireless enabled
Color
temperature
LP830
LP835
LP840
LP850
3000 K
3500 K
4000 K
5000 K
Controls5
Options
(blank)
N80
EL7L
No controls
nlight® with 80%
lumen management
N80EMG nlight® with 80%
lumen management. For use
with generator
supply EM power.
N100
nlight® without
lumen management
N100EMG nlight® without
lumen management. For use
with generator
supply EM power.
700 lumen
battery pack
EL14L
1400 lumen
battery pack
CP
Chicago
plenum
PWS1836 6' prewire,
3/8" diameter,
18-gauge,
1-circuit
PWS1846 6' prewire,
3/8" diameter,
18-gauge,
2-circuit
RRL_
RELOC®-ready
luminaire6
NPLT
Narrow pallet
Notes
1 Approximate lumen output.
2 Consult factory for availability. Not available with SLD, EL7L, or EL14L.
3 Not available with N80, N80EMG, N100 or N100EMG.
4 When using prewire option, use PWS1846.
5 nIO access limitations on 30L or EZB.
6 For ordering logic consult: RRL_2013.
7 When DGA kits are used, order 2FS4 F916 accessory.
2FSL4-2X4
Submitting Agency:
Description:
2FSL4 30L SLD PWS1836 LP840 DGA24
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
Type:
B
2FSL4 LED Recessed Lighting 2'x4'
Performance Data
Lumen package
Input watts 1
Lumens
LPW
30L LP830
30L LP835
30L LP840
30L LP850
40L LP830
40L LP835
40L LP840
40L LP850
48L LP830
48L LP835
48L LP840
48L LP850
60L LP830
60L LP835
60L LP840
60L LP850
72L LP830
72L LP835
72L LP840
72L LP850
30.7
30.8
30.9
31.0
39.2
39.4
39.5
39.6
46.2
46.4
46.6
46.7
52.0
52.2
52.4
52.5
69.5
70.0
70.2
70.3
3170
3341
3430
3664
3994
4247
4368
4637
4596
4856
4995
5347
5071
5373
5531
5867
6758
6847
7433
7823
103
108
111
118
102
108
111
117
100
105
107
115
98
103
106
112
97
98
106
111
PHOTOMETRICS
2FSL4 40L LP835, test no. LTL24699P5, tested in accordance to IESNA LM-79
90°
80°
200
400
60°
600
800
1000
1200
40°
1400
0°
20°
0°
CP Summary
0°
90
0° 1479 1479
5° 1469 1474
15° 1410 1415
25° 1297 1311
35° 1143 1162
978
45° 959
768
55° 749
545
65° 523
316
75° 293
103
85° 84
5
3
90
Coefficients of Utilization
pf
20%
pc
80%
70%
50%
pw 70%50%30% 50%30%10% 50%30%10%
0 119 119 119 116 116 116 111 111 111
1 108 103 99 101 97 93
97 93 90
2 98 90 83
88 81 76
84 79 74
3 90 79 70
77 69 63
74 68 62
4 82 70 61
68 60 54
66 59 53
5 75 62 53
61 52 46
59 51 46
6 69 56 47
55 46 40
53 46 40
7 64 51 42
50 41 36
48 41 35
8 60 46 38
46 37 32
44 37 31
9 56 42 34
42 34 29
41 33 28
10 53 39 31
39 31 26
38 31 26
RCR
180°
Zonal Lumen Summary
Zone
Lumens % Lamp % Fixture
0° - 30°
1141
26.9
26.9
0° - 40°
1864
43.9
43.9
0° - 60°
3292
77.5
77.5
0° - 90°
4248
100.0
100.0
90° - 180°
0
0.0
0.0
0° - 180°
4248
100.0
100.0
90°
2FSL4 48L LP835, test no. LTL24699P9, tested in accordance to IESNA LM-79
90°
80°
300
600
60°
900
1200
40°
1500
0°
20°
0°
CP Summary
0°
90
0° 1691 1691
5° 1679 1685
15° 1612 1618
25° 1483 1498
35° 1307 1328
45° 1097 1118
878
55° 856
624
65° 597
362
75° 336
118
85° 97
6
3
90
Coefficients of Utilization
pf
20%
pc
80%
70%
50%
pw 70%50%30% 50%30%10% 50%30%10%
0 119 119 119 116 116 116 111 111 111
1 108 103 99 101 97 93
97 93 90
2 98 90 83
88 81 76
84 79 74
3 90 79 70
77 69 63
74 68 62
4 82 70 61
68 60 54
66 59 53
5 75 62 53
61 52 46
59 51 46
6 69 56 47
55 46 40
53 46 40
7 64 51 42
50 41 36
48 41 35
8 60 46 38
46 37 32
44 37 31
9 56 42 34
42 34 29
41 33 28
10 53 39 31
39 31 26
38 31 26
RCR
180°
Zonal Lumen Summary
Zone
Lumens % Lamp % Fixture
0° - 30°
1304
26.9
26.9
0° - 40°
2131
43.9
43.9
0° - 60°
3763
77.5
77.5
0° - 90°
4857
100.0
100.0
90° - 180°
0
0.0
0.0
0° - 180°
4857
100.0
100.0
90°
2FSL4-2X4
LED: One Lithonia Way Conyers, GA 30012
Phone: 800-858-7763
Fax: 770-929-8789
www.lithonia.com
© 2014-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/11/15
Submitting Agency:
Description:
2FSL4 30L SLD PWS1836 LP840 DGA24
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
Type:
B
2FSL4 LED Recessed Lighting 2'x4'
MOUNTING DATA
DIMENSIONS
All dimensions are inches (centimeters) unless otherwise specified.
9/16
15/16
4-3/8
(11.1)
Specifications
Length: 48 (122.0)
Width: 24 (61.0)
Depth: 4-3/8 (11.1)
9/16
with accessory 2FS4 F916
15-3/4
(40)
24
(61)
SS
nLight® Control Accessories:
Order as separate catalog number. Visit www.sensorswitch.com/nLight for complete listing of nLight controls.
WallPod stations
On/Off
On/Off & Raise/Lower
Graphic Touchscreen
Photocell controls
On/Off & Dimming
Model number
nPODM [color]
nPODM DX [color]
nPOD GFX [color]
Model number
nCM ADCX
Occupancy sensors
Small motion 360°, ceiling (PIR / dual tech)
Large motion 360°, ceiling (PIR / dual tech)
Wide view (PIR / dual tech)
Wall Switch w/ Raise/Lower (PIR / dual tech)
Cat-5 cables (plenum rated)
10', CAT5 10FT
15', CAT5 15FT
Model number
nCM 9 / nCM PDT 9
nCM 10 / nCM PDT 10
nWV 16 / nWV PDT 16
nWSX LV DX / nWSX PDT LV DX
Model number
CAT5 10FT J1
CAT5 15FT J1
Constant Lumen Management
Enabled by the embedded nLight control, the FSL actively tracks its run-time and manages its light source such that constant lumen output is maintained over the system life. Referred
to as lumen management, this feature eliminates the energy waste created by the traditional practice of over-lighting.
Without Lumen Management
With Lumen Management
Energy is wasted and light level is inconsistent.
Energy is saved and light level remains consistent.
100%
46W
100%
46W
37W
50
80%
POWER
INPUT
POWER INPUT
LIGHT
OUTPUT
LIGHT OUTPUT
Saved Energy
POWER INPUT
LIGHT OUTPUT
POWER INPUT
Wasted Energy
LIGHT OUTPUT
80%
0
10
20
THOUSAND OPERATING HOURS
30
40
0
10
20
THOUSAND OPERATING HOURS
30
40
37W
50
Notes
With nlight 80% lumen management input watts start at 37 and gradually increasing to 46 at 50,000 hrs when using 48L system.
2FSL4-2X4
LED: One Lithonia Way Conyers, GA 30012
Phone: 800-858-7763
Fax: 770-929-8789
www.lithonia.com
© 2014-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/11/15
Submitting Agency:
Description:
Project:
Notes:
BE
COLOROW ELEMENTARY SCHOOL
Catalog
Number
FEATURES & SPECIFICATIONS
INTENDED USE — The FS Series recessed LED luminaire combines modern aesthetics and
performance in a general lighting product that enables the transformation from fluorescent to
LED. The high efficacy light engine delivers long life and excellent color to ensure a quality lighting
installation. Integrated controls options provide for design flexibility and optimum energy savings.
Multiple lumen packages and driver options provide solutions for all your lighting applications.
Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic
Environmental Compatibility table for suitable uses.
CONSTRUCTION — Rugged, one-piece cold-rolled steel coated polyester, painted after fabrication. The
satin white lens provides excellent shielding and wide distribution. End plates include integral T-bar clips.
Fixture may be mounted and wired in continuous rows. Total fixture height is only 4-3/8".
ELECTRICAL — Long-life LEDs, coupled with high-efficiency drivers, provide superior illumination for
extended service life. 90% LED lumen maintenance at 60,000 hours (L90/60,000). The LEDs have a CRI of 82.
eldoLED driver options deliver choice of dimming range, and choices for control, while assuring flicker-free,
low-current inrush, 89% efficiency and low EMI.
Optional integrated nLight® controls make each luminaire addressable - allowing it to digitally
communicate with other nLight enabled controls such as dimmers, switches, occupancy sensors and
photocontrols. Simply connect all the nLight enabled control devices and the FSL luminaires using standard
CAT-5 cabling. Unique plug-and-play convenience allows devices and luminaires to automatically discover
each other and self-commission.
Lumen Management: Unique lumen management system (option N80) provides onboard intelligence
that actively manages the LED light source so that constant lumen output is maintained over the system
life, preventing the energy waste created by the traditional practice of over-lighting.
Step-level dimming option allows system to be switched to 50% power for compliance with common
energy codes while maintaining fixture appearance.
Driver disconnect provided where required to comply with US and Canadian codes.
INSTALLATION — Unique grid interfacing arrangement provides mounting into standard 1" and 9/16"
tee bar or screw slot grids. 9/16" allows fixture trim to hang level with architectural ceiling tiles. Drywall
ceiling adaptors available. Suitable for damp location.
LISTINGS — CSA certified to meet US and Canadian standards. IC rated. DesignLights Consortium® (DLC)
qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified
Products List at www.designlights.org/QPL to confirm which versions are qualified.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
ORDERING INFORMATION
Type:
2FSL4 30L SLD EL7L PWS1846 LP840
DGA24
Vo
l
t
a
g
e
:
Ro
wI
n
f
o
r
ma
t
i
o
n
:
Notes
Co
l
o
r
s
/
Fi
n
i
s
h
e
s
:
Swi
t
c
h
i
n
go
p
t
i
o
n
s
:
Ce
i
l
i
n
gT
y
p
e
:
Su
s
p
e
n
s
i
o
nL
e
n
g
t
h
s
:
Sp
e
c
i
f
i
cDi
mmi
n
gBa
l
l
a
s
t
s
Ot
h
e
r
:
Type
(
i
f
r
e
q
u
i
r
e
d
)
:
FS Series
2FSL4
2' x 4'
LED
Stock Configurations
2FSL4 40L EZ1 LP835
2FSL4 40L EZ1 LP840
Example: 2FSL4 40L EZ1 LP835 N100
Lead times will vary depending on options selected. Consult with your sales representative.
2FSL4
Series
Air function
2FSL4 2X4 FSL
(blank) Static
H
Heat
removal
Lumens
30L
40L
48L
60L
72L
Lens
3000
40001
48001
60001
72001
1
Accessories: Order as separate catalog number.
2FS4 F916
DGA24
LED
Trim to adjust fixture mounting flush with
9/16" T-bar; for 2x4 fixture
Drywall ceiling adaptor , unit installation7
(blank) Satin
white
Voltage
(blank) MVOLT
347
3472
Driver
EZ1
eldoLED dims
to 1%, 0-10V
EZB eldoLED dims
to black,
0-10V
EDB eldoLED DALI3
EXB eldoLED DMX/
RDM3
SLD Step-level
dimming3,4
EXA1 Dims to 1%,
XPoint wireless enabled
EXAB Dims to dark,
XPoint wireless enabled
Color
temperature
LP830
LP835
LP840
LP850
3000 K
3500 K
4000 K
5000 K
Controls5
Options
(blank)
N80
EL7L
No controls
nlight® with 80%
lumen management
N80EMG nlight® with 80%
lumen management. For use
with generator
supply EM power.
N100
nlight® without
lumen management
N100EMG nlight® without
lumen management. For use
with generator
supply EM power.
700 lumen
battery pack
EL14L
1400 lumen
battery pack
CP
Chicago
plenum
PWS1836 6' prewire,
3/8" diameter,
18-gauge,
1-circuit
PWS1846 6' prewire,
3/8" diameter,
18-gauge,
2-circuit
RRL_
RELOC®-ready
luminaire6
NPLT
Narrow pallet
Notes
1 Approximate lumen output.
2 Consult factory for availability. Not available with SLD, EL7L, or EL14L.
3 Not available with N80, N80EMG, N100 or N100EMG.
4 When using prewire option, use PWS1846.
5 nIO access limitations on 30L or EZB.
6 For ordering logic consult: RRL_2013.
7 When DGA kits are used, order 2FS4 F916 accessory.
2FSL4-2X4
Submitting Agency:
Description:
Project:
Notes:
2FSL4 30L SLD EL7L PWS1846 LP840
DGA24
COLOROW ELEMENTARY SCHOOL
Type:
BE
2FSL4 LED Recessed Lighting 2'x4'
Performance Data
Lumen package
Input watts 1
Lumens
LPW
30L LP830
30L LP835
30L LP840
30L LP850
40L LP830
40L LP835
40L LP840
40L LP850
48L LP830
48L LP835
48L LP840
48L LP850
60L LP830
60L LP835
60L LP840
60L LP850
72L LP830
72L LP835
72L LP840
72L LP850
30.7
30.8
30.9
31.0
39.2
39.4
39.5
39.6
46.2
46.4
46.6
46.7
52.0
52.2
52.4
52.5
69.5
70.0
70.2
70.3
3170
3341
3430
3664
3994
4247
4368
4637
4596
4856
4995
5347
5071
5373
5531
5867
6758
6847
7433
7823
103
108
111
118
102
108
111
117
100
105
107
115
98
103
106
112
97
98
106
111
PHOTOMETRICS
2FSL4 40L LP835, test no. LTL24699P5, tested in accordance to IESNA LM-79
90°
80°
200
400
60°
600
800
1000
1200
40°
1400
0°
20°
0°
CP Summary
0°
90
0° 1479 1479
5° 1469 1474
15° 1410 1415
25° 1297 1311
35° 1143 1162
978
45° 959
768
55° 749
545
65° 523
316
75° 293
103
85° 84
5
3
90
Coefficients of Utilization
pf
20%
pc
80%
70%
50%
pw 70%50%30% 50%30%10% 50%30%10%
0 119 119 119 116 116 116 111 111 111
1 108 103 99 101 97 93
97 93 90
2 98 90 83
88 81 76
84 79 74
3 90 79 70
77 69 63
74 68 62
4 82 70 61
68 60 54
66 59 53
5 75 62 53
61 52 46
59 51 46
6 69 56 47
55 46 40
53 46 40
7 64 51 42
50 41 36
48 41 35
8 60 46 38
46 37 32
44 37 31
9 56 42 34
42 34 29
41 33 28
10 53 39 31
39 31 26
38 31 26
RCR
180°
Zonal Lumen Summary
Zone
Lumens % Lamp % Fixture
0° - 30°
1141
26.9
26.9
0° - 40°
1864
43.9
43.9
0° - 60°
3292
77.5
77.5
0° - 90°
4248
100.0
100.0
90° - 180°
0
0.0
0.0
0° - 180°
4248
100.0
100.0
90°
2FSL4 48L LP835, test no. LTL24699P9, tested in accordance to IESNA LM-79
90°
80°
300
600
60°
900
1200
40°
1500
0°
20°
0°
CP Summary
0°
90
0° 1691 1691
5° 1679 1685
15° 1612 1618
25° 1483 1498
35° 1307 1328
45° 1097 1118
878
55° 856
624
65° 597
362
75° 336
118
85° 97
6
3
90
Coefficients of Utilization
pf
20%
pc
80%
70%
50%
pw 70%50%30% 50%30%10% 50%30%10%
0 119 119 119 116 116 116 111 111 111
1 108 103 99 101 97 93
97 93 90
2 98 90 83
88 81 76
84 79 74
3 90 79 70
77 69 63
74 68 62
4 82 70 61
68 60 54
66 59 53
5 75 62 53
61 52 46
59 51 46
6 69 56 47
55 46 40
53 46 40
7 64 51 42
50 41 36
48 41 35
8 60 46 38
46 37 32
44 37 31
9 56 42 34
42 34 29
41 33 28
10 53 39 31
39 31 26
38 31 26
RCR
180°
Zonal Lumen Summary
Zone
Lumens % Lamp % Fixture
0° - 30°
1304
26.9
26.9
0° - 40°
2131
43.9
43.9
0° - 60°
3763
77.5
77.5
0° - 90°
4857
100.0
100.0
90° - 180°
0
0.0
0.0
0° - 180°
4857
100.0
100.0
90°
2FSL4-2X4
LED: One Lithonia Way Conyers, GA 30012
Phone: 800-858-7763
Fax: 770-929-8789
www.lithonia.com
© 2014-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/11/15
Submitting Agency:
Description:
Project:
Notes:
2FSL4 30L SLD EL7L PWS1846 LP840
DGA24
COLOROW ELEMENTARY SCHOOL
Type:
BE
2FSL4 LED Recessed Lighting 2'x4'
MOUNTING DATA
DIMENSIONS
All dimensions are inches (centimeters) unless otherwise specified.
9/16
15/16
4-3/8
(11.1)
Specifications
Length: 48 (122.0)
Width: 24 (61.0)
Depth: 4-3/8 (11.1)
9/16
with accessory 2FS4 F916
15-3/4
(40)
24
(61)
SS
nLight® Control Accessories:
Order as separate catalog number. Visit www.sensorswitch.com/nLight for complete listing of nLight controls.
WallPod stations
On/Off
On/Off & Raise/Lower
Graphic Touchscreen
Photocell controls
On/Off & Dimming
Model number
nPODM [color]
nPODM DX [color]
nPOD GFX [color]
Model number
nCM ADCX
Occupancy sensors
Small motion 360°, ceiling (PIR / dual tech)
Large motion 360°, ceiling (PIR / dual tech)
Wide view (PIR / dual tech)
Wall Switch w/ Raise/Lower (PIR / dual tech)
Cat-5 cables (plenum rated)
10', CAT5 10FT
15', CAT5 15FT
Model number
nCM 9 / nCM PDT 9
nCM 10 / nCM PDT 10
nWV 16 / nWV PDT 16
nWSX LV DX / nWSX PDT LV DX
Model number
CAT5 10FT J1
CAT5 15FT J1
Constant Lumen Management
Enabled by the embedded nLight control, the FSL actively tracks its run-time and manages its light source such that constant lumen output is maintained over the system life. Referred
to as lumen management, this feature eliminates the energy waste created by the traditional practice of over-lighting.
Without Lumen Management
With Lumen Management
Energy is wasted and light level is inconsistent.
Energy is saved and light level remains consistent.
100%
46W
100%
46W
37W
50
80%
POWER
INPUT
POWER INPUT
LIGHT
OUTPUT
LIGHT OUTPUT
Saved Energy
POWER INPUT
LIGHT OUTPUT
POWER INPUT
Wasted Energy
LIGHT OUTPUT
80%
0
10
20
THOUSAND OPERATING HOURS
30
40
0
10
20
THOUSAND OPERATING HOURS
30
40
37W
50
Notes
With nlight 80% lumen management input watts start at 37 and gradually increasing to 46 at 50,000 hrs when using 48L system.
2FSL4-2X4
LED: One Lithonia Way Conyers, GA 30012
Phone: 800-858-7763
Fax: 770-929-8789
www.lithonia.com
© 2014-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/11/15
Submitting Agency:
Description:
Project:
Notes:
B2E
COLOROW ELEMENTARY SCHOOL
Catalog
Number
FEATURES & SPECIFICATIONS
INTENDED USE — The FS Series recessed LED luminaire combines modern aesthetics and
performance in a general lighting product that enables the transformation from fluorescent to
LED. The high efficacy light engine delivers long life and excellent color to ensure a quality lighting
installation. Integrated controls options provide for design flexibility and optimum energy savings.
Multiple lumen packages and driver options provide solutions for all your lighting applications.
Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic
Environmental Compatibility table for suitable uses.
CONSTRUCTION — Rugged, one-piece cold-rolled steel coated polyester, painted after fabrication. The
satin white lens provides excellent shielding and wide distribution. End plates include integral T-bar clips.
Fixture may be mounted and wired in continuous rows. Total fixture height is only 4-3/8".
ELECTRICAL — Long-life LEDs, coupled with high-efficiency drivers, provide superior illumination for
extended service life. 90% LED lumen maintenance at 60,000 hours (L90/60,000).
eldoLED driver options deliver choice of dimming range, and choices for control, while assuring flicker-free,
low-current inrush, 89% efficiency and low EMI.
Optional integrated nLight® controls make each luminaire addressable - allowing it to digitally
communicate with other nLight enabled controls such as dimmers, switches, occupancy sensors and
photocontrols. Simply connect all the nLight enabled control devices and the FSL luminaires using standard
CAT-5 cabling. Unique plug-and-play convenience allows devices and luminaires to automatically discover
each other and self-commission.
Lumen Management: Unique lumen management system (option N80) provides onboard intelligence
that actively manages the LED light source so that constant lumen output is maintained over the system
life, preventing the energy waste created by the traditional practice of over-lighting.
Step-level dimming option allows system to be switched to 50% power for compliance with common
energy codes while maintaining fixture appearance.
Driver disconnect provided where required to comply with US and Canadian codes.
INSTALLATION — Unique grid interfacing arrangement provides mounting into standard 1" and 9/16"
tee bar or screw slot grids. 9/16" allows fixture trim to hang level with architectural ceiling tiles. Drywall
ceiling adaptors available. Suitable for damp location.
LISTINGS — CSA certified to meet US and Canadian standards. IC rated. DesignLights Consortium® (DLC)
qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified
Products List at www.designlights.org/QPL to confirm which versions are qualified.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
ORDERING INFORMATION
Type:
2FSL2 20L SLD EL7L PWS1846 LP840
DGA22
Vo
l
t
a
g
e
:
Ro
wI
n
f
o
r
ma
t
i
o
n
:
Notes
Co
l
o
r
s
/
Fi
n
i
s
h
e
s
:
Swi
t
c
h
i
n
go
p
t
i
o
n
s
:
Ce
i
l
i
n
gT
y
p
e
:
Su
s
p
e
n
s
i
o
nL
e
n
g
t
h
s
:
Sp
e
c
i
f
i
cDi
mmi
n
gBa
l
l
a
s
t
s
Ot
h
e
r
:
Type
(
i
f
r
e
q
u
i
r
e
d
)
:
FS Series
2FSL2
2' x 2'
LED
Stock Configurations
2FSL2 33L EZ1 LP835
2FSL2 33L EZ1 LP840
Example: 2FSL2 20L EZ1 LP835 N100
Lead times will vary depending on options selected. Consult with your sales representative.
2FSL2
Series
Air function
2FSL2 2X2 FSL
(blank) Static
H
Heat
removal
Lumens
Lens
20L 2000
33L 33001
40L 40001
1
Accessories: Order as separate catalog number.
2FS2 F916
DGA22
LED
Trim to adjust fixture mounting flush with
9/16" T-bar; for 2x2 fixture
Drywall ceiling adaptor , unit installation7
(blank) Satin
white
Voltage
(blank) MVOLT
347
3472
Driver
EZ1
eldoLED dims
to 1%, 0-10V
EZB eldoLED dims
to black,
0-10V
EDB eldoLED DALI3
EXB eldoLED
DMX/RDM3
SLD Step-level
dimming3,4
EXA1 Dims to 1%,
XPoint wireless enabled
EXAB Dims to dark,
XPoint wireless enabled
Color
temperature
LP830
LP835
LP840
LP850
3000 K
3500 K
4000 K
5000 K
Controls5
Options
(blank)
N80
EL7L
No controls
nlight® with 80%
lumen management
N80EMG nlight® with 80%
lumen management. For use with
generator supply
EM power.
N100
nlight® without lumen management
N100EMG nlight® without
lumen management. For use with
generator supply
EM power.
700 lumen
battery pack
EL14L
1400 lumen
battery pack
CP
Chicago
plenum
PWS1836 6' prewire,
3/8" diameter,
18-gauge,
1-circuit
PWS1846 6' prewire,
3/8" diameter,
18-gauge,
2-circuit
RRL_
RELOC®-ready
luminaire6
NPLT
Narrow pallet
Notes
1 Approximate lumen output.
2 Consult factory for availability. Not available with SLD, EL7L, or EL14L.
3 Not available with N80, N80EMG, N100 or N100EMG.
4 When using prewire option, use PWS1846.
5 nIO access limitations with 20L or EZB.
6 For ordering logic consult: RRL_2013.
7 When DGA kits are used, order 2FS2 F916 accessory.
2FSL2-2X2
Submitting Agency:
Description:
Project:
Notes:
2FSL2 20L SLD EL7L PWS1846 LP840
DGA22
COLOROW ELEMENTARY SCHOOL
Type:
B2E
2FSL2 LED Recessed Lighting 2'x2'
Performance Data
Lumen package
Input watts 1
Lumens
LPW
20L LP830
20L LP835
20L LP840
20L LP850
33L LP830
33L LP835
33L LP840
33L LP850
40L LP830
40L LP835
40L LP840
40L LP850
20.4
20.4
20.5
20.5
34.4
34.6
34.7
34.9
41.7
41.9
42.1
41.2
2048
2134
2196
2333
3318
3544
3626
3839
3857
4127
4209
4502
100
105
107
114
96
103
105
110
93
99
100
109
PHOTOMETRICS
2FSL2 33L LP835, test no. LTL24691P5, tested in accordance to IESNA LM-79
90°
80°
200
400
60°
600
800
1000
40°
1200
0°
20°
0°
CP Summary
0°
90
0° 1240 1240
5° 1228 1237
15° 1178 1190
25° 1080 1100
979
35° 948
827
45° 792
650
55° 619
465
65° 434
268
75° 246
87
85° 74
3
3
90
Coefficients of Utilization
pf
20%
pc
80%
70%
50%
pw 70%50%30% 50%30%10% 50%30%10%
0 119 119 119 116 116 116 111 111 111
1 108 103 99 101 97 93
97 93 90
2 98 90 83
88 81 76
84 79 74
3 90 79 70
77 69 63
74 68 62
4 82 70 61
68 60 54
66 59 53
5 75 62 53
61 53 46
59 51 46
6 69 56 47
55 46 40
53 46 40
7 64 51 42
50 42 36
48 41 35
8 60 46 38
46 37 32
44 37 31
9 56 42 34
42 34 29
41 33 28
10 53 39 31
39 31 26
38 31 26
RCR
180°
Zonal Lumen Summary
Zone
Lumens % Lamp % Fixture
0° - 30°
953
26.9
26.9
0° - 40°
1556
43.9
43.9
0° - 60°
2746
77.5
77.5
0° - 90°
3545
100.0
100.0
90° - 180°
0
0.0
0.0
0° - 180°
3545
100.0
100.0
90°
2FSL2 40L LP835, test no. LTL24691P9, tested in accordance to IESNA LM-79
90°
80°
200
400
60°
600
800
1000
1200
40°
1400
0°
20°
0°
CP Summary
0°
90
0° 1445 1445
5° 1431 1441
15° 1372 1386
25° 1257 1282
35° 1104 1140
963
45° 923
758
55° 721
542
65° 506
312
75° 286
101
85° 87
4
4
90
Coefficients of Utilization
pf
20%
pc
80%
70%
50%
pw 70%50%30% 50%30%10% 50%30%10%
0 119 119 119 116 116 116 111 111 111
1 108 103 99 101 97 93
97 93 90
2 98 90 83
88 81 76
84 79 74
3 90 79 70
77 69 63
74 68 62
4 82 70 61
68 60 54
66 59 53
5 75 62 53
61 53 46
59 51 46
6 69 56 47
55 46 40
53 46 40
7 64 51 42
50 42 36
48 41 35
8 60 46 38
46 37 32
44 37 31
9 56 42 34
42 34 29
41 33 28
10 53 39 31
39 31 26
38 31 26
RCR
180°
Zonal Lumen Summary
Zone
Lumens % Lamp % Fixture
0° - 30°
1110
26.9
26.9
0° - 40°
1812
43.9
43.9
0° - 60°
3198
77.5
77.5
0° - 90°
4129
100.0
100.0
90° - 180°
0
0.0
0.0
0° - 180°
4129
100.0
100.0
90°
2FSL2-2X2
LED: One Lithonia Way Conyers, GA 30012
Phone: 800-858-7763
Fax: 770-929-8789
www.lithonia.com
© 2014-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/11/15
Submitting Agency:
Description:
Project:
Notes:
2FSL2 20L SLD EL7L PWS1846 LP840
DGA22
COLOROW ELEMENTARY SCHOOL
Type:
B2E
2FSL2 LED Recessed Lighting 2'x2'
MOUNTING DATA
DIMENSIONS
All dimensions are inches (centimeters) unless otherwise specified.
9/16
15/16
Specifications
Length: 24 (61.0)
Width: 24 (61.0)
Depth: 4-3/8 (11.1)
9/16
with accessory 2FS2 F916
4-3/8
(11.1)
15-3/4
(40)
24
(61)
SS
nLight® Control Accessories:
Order as separate catalog number. Visit www.sensorswitch.com/nLight for complete listing of nLight controls.
WallPod stations
On/Off
On/Off & Raise/Lower
Graphic Touchscreen
Photocell controls
On/Off & Dimming
Model number
nPODM [color]
nPODM DX [color]
nPOD GFX [color]
Model number
nCM ADCX
Occupancy sensors
Small motion 360°, ceiling (PIR / dual tech)
Large motion 360°, ceiling (PIR / dual tech)
Wide view (PIR / dual tech)
Wall Switch w/ Raise/Lower (PIR / dual tech)
Cat-5 cable (plenum rated)
10', CAT5 10FT
15', CAT5 15FT
Model number
nCM 9 / nCM PDT 9
nCM 10 / nCM PDT 10
nWV 16 / nWV PDT 16
nWSX LV DX / nWSX PDT LV DX
Model number
CAT5 10FT J1
CAT5 15FT J1
Constant Lumen Management
Enabled by the embedded nLight control, the FSL actively tracks its run-time and manages its light source such that constant lumen output is maintained over the system life. Referred to as
lumen management, this feature eliminates the energy waste created by the traditional practice of over-lighting.
Without Lumen Management
With Lumen Management
Energy is wasted and light level is inconsistent.
Energy is saved and light level remains consistent.
100%
35W
100%
35W
28W
50
80%
POWER
INPUT
POWER INPUT
LIGHT
OUTPUT
LIGHT OUTPUT
Saved Energy
POWER INPUT
LIGHT OUTPUT
POWER INPUT
Wasted Energy
LIGHT OUTPUT
80%
0
10
20
THOUSAND OPERATING HOURS
30
40
0
10
20
THOUSAND OPERATING HOURS
30
40
28W
50
Notes
With nlight 80% lumen management input watts start at 28 and gradually increasing to 35 at 50,000 hrs when using 33L system.
2FSL2-2X2
LED: One Lithonia Way Conyers, GA 30012
Phone: 800-858-7763
Fax: 770-929-8789
www.lithonia.com
© 2014-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/11/15
Submitting Agency:
Description:
RV8 40/20 RO8WR 277 / RV8RGIN
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
Catalog
Number
Vo
l
t
a
g
e
:
FEATURES & SPECIFICATIONS
C
Ro
wI
n
f
o
r
ma
t
i
o
n
:
Notes
Co
l
o
r
s
/
Fi
n
i
s
h
e
s
:
INTENDED USE — LED downlight for retrofit of installed 8” nominal commercial “pan-style” housings
with incandescent, compact fluorescent (CFL), or high intensity discharge (HID) sources. Compatible
aperture range is 7-3/4" to 8-7/8”. All installation can be performed from the room side without removing
the existing fixture. Multiple lumen packages to replace the installed base of CFL or HID sources with
energy savings up to 50%. See Lumen Equivalency Chart.
Type:
Swi
t
c
h
i
n
go
p
t
i
o
n
s
:
Ce
i
l
i
n
gT
y
p
e
:
Su
s
p
e
n
s
i
o
nL
e
n
g
t
h
s
:
Sp
e
c
i
f
i
cDi
mmi
n
gBa
l
l
a
s
t
s
Ot
h
e
r
:
Type
(
i
f
r
e
q
u
i
r
e
d
)
:
RV8 LED
CONSTRUCTION — Innovative housing design that simultaneously retains and centers the fixture in
the existing mounting pan.
OPTICS — LED light source with diffuse lens recessed in a reflector with a 55-degree cutoff. Aluminum
full reflectors are optically designed to maximize lumen output and to provide superior glare control.
8" OPEN LED
Non-IC
Retrofit Downlight
Anodized trim colors for open reflectors are clear diffuse, pewter or wheat. White polyester powder
coat also available.
Minimum CRI of 80.
ELECTRICAL — Proprietary electrical design allows for excellent line voltage dimming down to 10% light
output on 120V product. The zero in rush design enables maximum loading of incandescent dimmers.
This enables customers to add dimming at a low cost without pulling additional wires. For compatible
dimmers and dimming range, refer to Dimmer Compatibility Chart.
D
I
LE
MAB
M
The system maintains 70% lumen output at more than 60,000 hours.
LISTINGS — CSA certified to US and Canadian safety standards. Wet location listed. ENERGY STAR®
certified.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
7-3/4 (19.7)
Note: Specifications subject to change without notice.
8 (20.3)
LUMEN EQUIVALENCY CHART
Delivered lumen values
2000
2500
3000
26W
34W
42W
1/42W CFL
2/26W CFL
2/32W CFL
> 2/32W CFL
N/A
50W ED17
70W ED17
Comparable incandescent
200W A21
N/A
300W BR40
Comparable halogen PAR
100W
N/A
N/A
Approximate LED wattage
Comparable fluorescent
Comparable HID
9-1/4 (23.5)
Aperture:
Overlap trim:
Height:
Length:
7-1/4 (18.4)
7-1/4 (18.4)
9-1/4 (23.5)
8 (20.3)
9 (22.9)
Specifications
Max. frame aperture: 8-7/8 (22.5)
Min. frame aperture: 7-3/4 (19.7)
Max. ceiling thickness: 2 (5.1)
All dimensions are inches (centimeters) unless otherwise indicated.
ORDERING INFORMATION
Example: RV8 35/30 RO8AR 120
Lead times will vary depending on options selected. Consult with your sales representative.
RV8
Series
Color temperature
Lumens
RV8
27/
30/
35/
40/
20
25
30
2700 K
3000 K
3500 K
4000 K
2000 lumens
2500 lumens 1
3000 lumens 1
1
Reflector
Trim color
Finish
RO8
AR
PR
WTR
WR
(blank)
LD
LS
Clear
Pewter
Wheat
White 2
Semi-specular
Matte-diffuse
Specular
Voltage
Options
120
277
TRW
TRBL
White painted flange
Black painted flange
Accessories: Order as separate catalog number.
EAC ISSM 375
EAC ISSM 125
RK2 SDT 347277120 395VA AD JZ
GRA810 JZ
RV8RGIN
RV8RGIN IFB
DOWNLIGHTING
Compact interruptible emergency AC power system
Compact interruptible emergency AC power system
347V step down transformer mounted in box installed by others
Oversized trim ring with 10" outside diameter. Refer to TECH-GOOF RINGS
for more options.
8" rough-in frame. Refer to RV ROUGH-IN FRAMES.
8" install from below, rough-in frame. Refer to RV ROUGH-IN FRAMES.
Notes
1 Approximate lumen output.
2 Not available with finishes.
RV8 LED
Submitting Agency:
Description:
RV8 40/20 RO8WR 277 / RV8RGIN
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
Type:
C
RV8 LED
PHOTOMETRICS
Distribution Curve
Distribution Data
Output Data
Coefficient of Utilization
Illuminance Data at 30” Above Floor for
a Single Luminaire
RV8 35/20 120 RO8AR, input watts: 26 , delivered lumens: 1768, LM/W = 68, test no. LTL23512.
60°
600
1200
0°
40°
0
5
15
25
35
45
55
65
75
85
90
Lumens
148
419
535
434
191
37
3
1
0
Zone
Lumens % Lamp
0° - 30° 1102.9
62.4
0° - 40° 1536.8
86.9
0° - 60° 1764.0
99.8
0° - 90° 1768.0
100.0
90° - 180°
0.0
0.0
0° - 180° 1768.0 *100.0
*Efficiency
pf
pc
pw
0
1
2
3
4
5
6
7
8
9
10
RCR
80°
Ave
1541
1548
1513
1174
701
236
34
3
0
0
1
80%
50% 30% 10%
119 119 119
110 108 105
102 98 94
94 89 85
88 82 77
81 75 71
76 70 65
71 64 60
66 60 56
62 56 52
59 52 48
20%
70%
50% 30% 10%
116 116 116
108 106 104
100 96 93
93 88 84
86 81 77
81 75 70
75 69 65
70 64 60
66 60 55
62 56 52
58 52 48
50%
50% 30% 10%
111 111 111
104 102 100
97 94 91
90 86 83
84 80 76
79 74 70
74 68 64
69 63 59
65 59 55
61 55 51
57 52 48
50% beam 10% beam 54.2°
83.3°
Inital FC
Mounting Center
Height
Beam Diameter FC Diameter FC
5.1
9.8
25.5
5.6
50.9
8.0
2.7
13.3
13.7
7.7
27.4
10.0
1.7
16.9
8.5
9.7
17.1
12.0
1.2
20.5
5.8
11.8
11.7
14.0
0.8
24.0
4.2
13.8
8.5
16.0
20°
RV8 35/30 120 RO8AR, input watts: 42 , delivered lumens: 2803, LM/W = 68, test no. LTL23505.
800
60°
1600
40°
2400
0°
0
5
15
25
35
45
55
65
75
85
90
Lumens
233
660
852
701
300
50
5
2
0
Zone
Lumens % Lamp
0° - 30° 1745.0
62.3
0° - 40° 2446.2
87.3
0° - 60° 2796.1
99.8
0° - 90° 2802.8
100.0
90° - 180°
0.0
0.0
0° - 180° 2802.8 *100.0
*Efficiency
pf
pc
pw
0
1
2
3
4
5
6
7
8
9
10
RCR
80°
Ave
2428
2432
2381
1868
1133
373
42
5
1
0
0
80%
50% 30% 10%
119 119 119
110 108 105
102 98 94
95 89 85
88 82 77
82 75 71
76 70 65
71 64 60
66 60 56
62 56 52
58 52 48
20%
70%
50% 30% 10%
116 116 116
108 106 104
100 96 93
93 88 84
87 81 77
81 75 70
75 69 65
70 64 60
66 60 55
62 56 52
58 52 48
50%
50% 30% 10%
111 111 111
104 102 100
97 94 91
90 86 83
84 80 76
79 74 70
74 68 64
69 63 60
65 59 55
61 55 51
57 52 48
50% beam 10% beam 54.8°
83.6°
Inital FC
Mounting Center
Height
Beam Diameter FC Diameter FC
8.0
9.8
40.1
5.7
80.3
8.0
4.3
13.4
21.6
7.8
43.2
10.0
2.7
17.0
13.5
9.8
26.9
12.0
1.8
20.6
9.2
11.9
18.4
14.0
1.3
24.1
6.7
14.0
13.3
16.0
20°
RV8 35/30 277 RO8AR, input watts: 44 , delivered lumens: 2980, LM/W = 68, test no. LTL24235.
60°
1000
2000
0°
40°
0
5
15
25
35
45
55
65
75
85
90
Lumens
251
710
915
745
306
48
5
1
0
Zone
Lumens % Lamp
0° - 30° 1875.5
62.9
0° - 40° 2620.2
87.9
0° - 60° 2973.9
99.8
0° - 90° 2980.6
100.0
90° - 180°
0.0
0.0
0° - 180° 2980.6 *100.0
*Efficiency
pf
pc
pw
0
1
2
3
4
5
6
7
8
9
10
RCR
80°
Ave
2605
2617
2560
2006
1204
376
40
5
2
0
0
80%
50% 30% 10%
119 119 119
110 108 105
102 98 94
95 89 85
88 82 78
82 76 71
76 70 65
71 65 60
67 60 56
62 56 52
59 53 49
20%
70%
50% 30% 10%
116 116 116
108 106 104
100 97 93
93 88 85
87 81 77
81 75 71
75 69 65
70 64 60
66 60 56
62 56 52
58 52 48
50%
50% 30% 10%
111 111 111
104 102 101
97 94 91
91 87 83
85 80 76
79 74 70
74 69 65
69 64 60
65 59 56
61 56 52
57 52 48
50% beam 10% beam 54.8°
83.2°
Inital FC
Mounting Center
Height
Beam Diameter FC Diameter FC
8.6
9.8
43.1
5.7
86.1
8.0
4.6
13.3
23.2
7.8
46.3
10.0
2.9
16.9
14.4
9.9
28.9
12.0
2.0
20.4
9.8
11.9
19.7
14.0
1.4
24.0
7.1
14.0
14.3
16.0
20°
RV8 35/20 277 RO8AR, input watts: 29 , delivered lumens: 2192, LM/W = 75, test no. LTL24233.
600
60°
1200
40°
1800
0°
0
5
15
25
35
45
55
65
75
85
90
Lumens
184
519
664
541
232
47
4
1
0
Zone
Lumens % Lamp
0° - 30° 1367.5
62.4
0° - 40° 1908.5
87.1
0° - 60° 2186.7
99.8
0° - 90° 2191.5
100.0
90° - 120°
0.5
0.0
90° - 130°
0.5
0.0
90° - 150°
0.5
0.0
90° - 180°
0.7
0.0
0° - 180° 2192.2 *100.0
*Efficiency
pf
pc
pw
0
1
2
3
4
5
6
7
8
9
10
RCR
80°
Ave
1916
1925
1872
1453
876
284
43
3
1
0
0
80%
50% 30% 10%
119 119 119
110 108 105
102 98 94
94 89 85
88 82 77
81 75 71
76 70 65
71 64 60
66 60 56
62 56 52
59 52 48
20%
70%
50% 30% 10%
116 116 116
108 106 104
100 96 93
93 88 84
86 81 77
81 75 70
75 69 65
70 64 60
66 60 55
62 56 52
58 52 48
50%
50% 30% 10%
111 111 111
104 102 100
97 94 91
90 86 83
84 80 76
79 74 70
74 68 64
69 63 59
65 59 55
61 55 51
57 52 48
50% beam 10% beam 54.2°
83.1°
Inital FC
Mounting Center
Height
Beam Diameter FC Diameter FC
6.3
9.8
31.7
5.6
63.3
8.0
3.4
13.3
17.0
7.7
34.1
10.0
2.1
16.8
10.6
9.7
21.2
12.0
1.4
20.4
7.2
11.8
14.5
14.0
1.1
23.9
5.3
13.8
10.5
16.0
20°
Notes
• Tested in accordance with IESNA LM-79-08.
• Tested to current IES and NEMA standards under stabilized laboratory conditions.
• Actual performance may differ as a result of end-user environment and application.
• Actual wattage may differ by +/- 10% when operating between 120-277V +/- 10%.
• CRI: 84 typical.
DOWNLIGHTING: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com
RV8 LED
© 2013-2014 Acuity Brands Lighting, Inc. All rights reserved. Rev. 04/30/14
Submitting Agency:
Description:
RV8 40/20 RO8WR 277 / RV8RGIN
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
Type:
C
RV8 LED
ADDITIONAL DATA
Color temperature
Lumen multiplier
Trim finish
Lumen multiplier
27K
0.94
Clear semi-specular (AR)
1.00 (baseline)
30K
0.98
Clear specular (LS)
1.02
35K
1.00 (baseline)
Clear matte-diffuse (LD)
0.93
40K
1.02
Pewter (PR)
Wheat (WTR)
White (WR)
ENERGY DATA*
DIMMER COMPATIBILITY CHART
Manufacturer
Model/Series
Part numbers
Sensor Switch
nlight
nSP5 PCD 2W
0.88
Diva C-L
DVCL-153P
0.92
Diva
DVELV-300P
Diva
DVELV-600P
Skylark Contour
CT-603P
Skylark Contour C-L
CTCL-153P
Decora
6674-P
Decora
6633P
IllumaTech™
IPX06-70Z (for 277V)
TRIMATRON
6681++
TRIMATRON
6684++
Lutron
0.96
Leviton
ELECTRICAL DATA*
Input current
Min. operating temp
-18°C (0°F)
Max. operating temp
45°C (113°F)
Lumen
package
120V
277V
Min. power factor
0.98
2000 lm
0.22 A
0.10 A
Input frequency
50/60 Hz­
2500 lm
0.10 A
0.14 A
*Values at non-dimming line voltage.
3000 lm
0.36 A
0.16 A
Comments
Dims to 40%
++ Must have at least 40W on dimmer circuit.
* Values at non-dimming line voltage.
DOWNLIGHTING: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com
RV8 LED
© 2013-2014 Acuity Brands Lighting, Inc. All rights reserved. Rev. 04/30/14
Submitting Agency:
Type:
Description:
11892RE
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
D
Vo
l
t
a
g
e
:
Ro
wI
n
f
o
r
ma
t
i
o
n
:
Catalog Number
Co
l
o
r
s
/
Fi
n
i
s
h
e
s
:
Ce
i
l
i
n
gT
y
p
e
:
Notes
Swi
t
c
h
i
n
go
p
t
i
o
n
s
:
Vo
l
t
a
g
e
:
Ro
wI
n
f
o
r
ma
t
i
o
n
:
Co
l
o
r
s
/
Fi
n
i
s
h
e
s
:
Swi
t
c
h
i
n
go
p
t
i
o
n
s
:
Ce
i
l
i
n
gT
y
p
e
:
Su
s
p
e
n
s
i
o
nL
e
n
g
t
h
s
:
Sp
e
c
i
f
i
cDi
mmi
n
gBa
l
l
a
s
t
s
Ot
h
e
r
:
(
i
f
r
e
q
u
i
r
e
d
)
:
Su
s
p
e
n
s
i
o
nL
e
n
g
t
h
s
:
Sp
e
c
i
f
i
cDi
mmi
n
gBa
l
l
a
s
t
s
Type
Ot
h
e
r
:
(
i
f
r
e
q
u
i
r
e
d
)
:
Indoor Decorative
Litepuff
FEATURES & SPECIFICATIONS
INTENDED USE
Provides general illumination for residential and commercial applications.
Ideal for use as lighting in bathroom/lavatories, over hospital beds, hallways/
corridors stairways and utility areas.
Vanity
ATTRIBUTES
A distinctive contoured design complements a variety of decors. Durable
milk-white acrylic diffuser provides a widespread uniform illumination. Suitable for vertical or horizontal mounting. Available in 2', 3' and 4' lengths.
Linear T8 Fluorescent
Utilizes linear T8 fluorescent lamps for energy efficiency, superior color
rendering and long life (not included).
Standard with electronic ballast (120 volt, 60Hz) ensures no flickering and
quiet operation without interfering with other electronics. Also available in
other ballast configurations.
For use with non-dimmable switches only.
LISTING
CUL listed to US and Canadian safety standard on Residential Electronic (RE)
ballast fixtures and suitable for damp locations. ENERGY STAR® qualified.
ADA compliant. For Non-RE bllast, UL and CSA (standard) for NOM Certified
see options.
WARRANTY
Guaranteed for two years against mechanical defects in manufacture.
DIMENSION
Nominal
Size
Lamp
Configuration
Model
Number
Number
of Lamps
(A) Width
inches (cm)
(B) Length
inches (cm)
(C) Extension*
inches (cm)
11890
(2) 17W linear T8
5" (12.7)
27" (68.6)
4" (10.2)
(A)
(B)
2'
(C)
3'
11891
(2) 25W linear T8
5" (12.7)
39" (99.1)
4" (10.2)
4'
11892
(2) 32W linearT8
5" (12.7)
51" (129.5)
4" (10.2)
* Extension from wall
All dimensions are in inches (centimeters)
ORDERING INFORMATION
Example: 11892RE
Choose the boldface catalog nomenclature that best suits your needs and write it on the
appropriate line. Order accessories and replacement parts as separate catalog numbers.
Model Number1,2
11890 2' - (2) 17W T8 fluorescent lamps required
11891 3' - (2) 25W T8 fluorescent lamps required
11892 4' - (2) 32W T8 fluorescent lamps required
Accessories/Replacement parts
DVANPUFF 24
DVANPUFF 36
DVANPUFF 48
24" white acrylic diffuser
36" white acrylic diffuse
48" white acrylic diffuser
Light Concepts Indoor Decorative - Vanity
Residential Ballast3
RE 120 volt residential
electronic ballast
(standard)
(blank) Other voltage and
ballast types available
(see ballast/voltage)
Ballast/Voltage 4
(blank) RE ballast
fixtures only
MVOLT Multi-volt
120 120 volt
277 277 volt
347 347 volt
Others voltage and
ballast types (consult
factory)
Notes:
Options
GEB Electronic ballast, <20%THD
GEB10IS T8 electronic ballast, <10%
THD, instant start
GEB10RS T8 electronic ballast, 10%
THD, rapid start
NOM NOM Certified
(Consult factory for
other options)
1. Lamps not included.
2. Use with non-dimmable switches only.
3. Residential electronic ballast standard and requires RE
designation.
4. No designation for lamp type is required on RE ballast fixtures.
Sheet #: PUFV
DEC-310
Submitting Agency:
Description:
RT5D LED 1700L 40K 277 ELR
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
FEATURES & SPECIFICATIONS
AA
Catalog
Number
Vo
l
t
a
g
e
:
Ro
wI
n
f
o
r
ma
t
i
o
n
:
Notes
Co
l
o
r
s
/
Fi
n
i
s
h
e
s
:
Swi
t
c
h
i
n
go
p
t
i
o
n
s
:
Ce
i
l
i
n
gT
y
p
e
:
Su
s
p
e
n
s
i
o
nL
e
n
g
t
h
s
:
Sp
e
c
i
f
i
cDi
mmi
n
gBa
l
l
a
s
t
s
Ot
h
e
r
:
Type
INTENDED USE — Provides volumetric lighting by filling the entire volume of space with light, delivering
the ideal amount of light to walls, cubicles, work surfaces and people. Typical applications include corridors,
lobbies, conference rooms and private offices. RT5D LED will fill the space with light without glare or cave
effect of traditional downlights. The RT5D LED is 20% more efficient when compared to the mean efficacy
of a common two-lamp, 26W DTT compact fluorescent downlight. The system maintains 70% lumen output
at more than 50,000 hours.
Type:
(
i
f
r
e
q
u
i
r
e
d
)
:
OPTICAL SYSTEM — Regressed, two-piece refractive system obscures the lamp and smoothly washes
the reflector with light.
RT5D LED
Impact-modified acrylic prismatic refractor with polymeric light-diffusing film.
CONSTRUCTION — 16-gauge galvanized steel mounting/plaster frame with mechanical trim retention
integral yoke to retain optical system.
Rugged, one-piece white die-cast reflector system with linear facets softens and distributes light into the
space (ships separately).
1' x 1'
LED
Mounting bars are 16-gauge galvanized steel with continuous 2-3/4" vertical adjustment, held in place with
wingnuts. Post installation adjustment possible without the use of tools from above or below the ceiling.
Galvanized steel junction box with bottom-hinged access covers and spring latches. Two combination
1/2"-3/4" and three 1/2" knockouts for straight-through conduit runs. Capacity: 8 (4 in, 4 out) No. 12 AWG
conductors, rated for 90°C.
Fixture height of 4-7/8" allows installation in shallow plenum applications.
Maximum 2" ceiling thickness.
ELECTRICAL SYSTEM — Utilizes high-efficiency LEDs mounted to a metal core circuit board, ensuring
cool-running operation, 3500 Kelvin temperature, CRI > 80.
Patent-pending thermal dynamic control ensures cool running LEDs.
25-1/2 (64.8)
Reverse polarity protection and push-in connectors standard.
High-efficiency, thermally protected, electronic LED power supply and driver mounted to the junction box.
4-1/2
(11.4)
Typical lumens per system is 1700 utilizing 41 total system watts.
LISTING — CSA Certified to U.S. and Canadian safety standards. Damp location listed.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Specifications
10-5/8 (27.0)
13-5/8 (34.6)
Aperture: 10-5/8 (27.0)
Ceiling Opening: 11-1/4 X 11-1/4 (28.8 X 28.8)
Protected by US Patents Nos. D533,781 and D581,376.
NOTE: Specifications subject to change without notice.
4-1/2
(11.4)
Overlap Trim: 13-5/8 (34.4)
Height: 4-7/8 (12.4)
Length: 25-1/2 (64.8)
10-5/8 (27.0)
13-5/8 (34.6)
Standard Width: 15 (38.1)
All dimensions are inches (centimeters).
ORDERING INFORMATION
Example: RT5D LED 35K 120
Lead times will vary depending on options selected. Consult with your sales representative.
RT5D LED
Series
RT5D LED
Lumen output1
(blank)
1700L
Color temperature
35K
40K
3500K
4000K
Voltage
120
277
347
Options
LFS
CP
DIM
ELR
LED freezer shroud (shipped separately)2
Chigago Plenum
0 -10V dimming driver, 10% minimum light output3
Emergency battery pack; remote test switch provided4
Accessories and Replacement Parts: Order as separate catalog number.
Housing only
Trim only
NPP16 D
NPP16 D ER
DOWNLIGHTING
RT5D LED 120 HSG U
RT5D LED 277 HSG U
RT5D LED 1700L 3500K TRIM U
nLight® network relay pack with 0-10V dimming. Refer to TN-602. Fixtures must
be ordered with DIM option.
nLight® network relay pack with 0-10V dimming for emergency circuit operation.
Refer to TN-602. Fixtures must be ordered with DIM option. 5
Notes
1 Typical system delivered lumens.
2 Available for use only with freezer applications.
3 Dimmable with any 0-10v dimmer.
4 Not available in 347V.
5 For use with generator supply EM power. Will require an
emergency hot feed and normal hot feed.
RT5D-LED
Submitting Agency:
Description:
RT5D LED 1700L 40K 277 ELR
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
Type:
AA
RT5D LED Volumetric Recessed Downlight
FREEZER SHROUD (shown with fixture installed)
16-3/4
(42.5)
16-7/8
(42.9)
Dimensions
Height: 6 (15.2)
Length: 16-3/4 (42.6)
Width: 16-7/8 (42.9)
All dimensions are inches (centimeters).
PHOTOMETRICS
RT5D LED, 1700 system delivered lumens,test no. LTL16621, tested in accordance to IESNA LM-79-2008
90°
40
80°
120
70°
200
60°
280
50°
360
440
40°
520
600
680
30°
760
0°
10°
20°
Zonal Lumen Summary
Zone Lumens % Lamp
0° - 30° 589
0° - 40° 919
0° - 60° 1471
0° - 90° 1700
90° - 180° 0
0° - 180° 1700
34.6
54.1
86.5
100.0
0.0
*100.0
*Total Efficiency
pf
pc
pw
Coefficients of Utilization
20%
80%
70%
50% 30%
50% 30%
50%
50% 30%
0
1
2
3
4
5
6
7
8
9
10
119 119
106 103
94 88
84 76
75 67
68 59
61 53
56 48
51 43
47 40
44 36
111 111
100 97
89 84
79 74
71 65
64 58
59 52
54 47
49 42
46 39
42 36
RCR
Polar Plot
Intensity Distribution
Horizontal Angle
Vertical Angle Lumens
0
77
5
10
212
15
20
301
25
30
330
35
40
306
45
50
246
55
60
159
65
70
63
75
80
7
85
90
116 116
104 101
92 87
82 75
74 66
67 59
60 53
55 47
51 43
47 39
43 36
Performance
bebyaffected
by ambient
temperature
and binning
processes.
• Performance
can be can
affected
ambient temperature
and binning
processes. Please
consult factory
for details. Please consult factory for details.
• Actual wattage may differ by +/- 5% when operating between 120-347V +/- 10%.
RT5D-LED
DOWNLIGHTING: One Lithonia Way Conyers, GA 30012 Phone: 800.315.4935 Fax: 770-918-1209 www.lithonia.com
© 2008-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 01/19/15
Submitting Agency:
Description:
WST LED 2 10A700/40K SR4 MVOLT DDBXD
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
WST LED
Catalog
Number
Architectural Wall Sconce
Vo
l
t
a
g
e
:
Type:
BB
Ro
wI
n
f
o
r
ma
t
i
o
n
:
Notes
Co
l
o
r
s
/
Fi
n
i
s
h
e
s
:
Swi
t
c
h
i
n
go
p
t
i
o
n
s
:
C
e
i
l
i
n
gT
y
p
e
:
Type
Su
s
p
e
n
s
i
o
nL
e
n
g
t
h
s
:
Sp
e
c
i
f
i
cDi
mmi
n
gBa
l
l
a
s
t
s
Ot
h
e
r
:
(
i
f
r
e
q
u
i
r
e
d
)
:
Hit the Tab key or mouse over the page to see all interactive elements.
Introduction
Inverted available with
WLU option only.
Specifications
Luminaire
Height:
Width:
Depth:
Weight:
Optional Back Box (BBW)
7-1/4”
4”
Height:
(18.4 cm)
16-1/4”
(10.2 cm)
5-1/2”
Width:
(41.3 cm)
9-1/8”
(14.0 cm)
1-1/2”
Depth:
(23.2 cm)
(3.8 cm)
WALL
SCONCE
(Back
Box Wall) MOUNTING
WALL SCONCE BBW
(Back
BoxBBW
Wall)
MOUNTING
17 lbs
W
(7.7 kg)
5-1/2
For 3/4” NPT
side-entry
conduit
1-1/2
5-1/2
H
H
4
D
1-1/2
The classic Architectural Wall Sconce is now
available with the latest in LED technology. The
result is a long-life, maintenance-free product with
typical energy savings of 75% compared to metal
halide versions. The integral battery backup option
provides emergency egress lighting, without the
use of a back-box or remote gear, so installations
maintain their aesthetic integrity.
The WST LED is ideal for replacing existing 50 –
175W metal halide wall-mounted products. The
expected service life is 20+ years of nighttime use.
4
D
W
Ordering Information
EXAMPLE: WST LED 2 10A700/40K SR3 MVOLT DDBTXD
WST LED
Series
WST LED
Light Engines
1
2
One engine
(10 LEDs)
Two engines
(20 LEDs)
Performance
Package
Distribution
700 mA options:
10A700/30K 3000K
10A700/40K 4000K
10A700/50K 5000K
SR2
SR3
SR4
Type II
Type III
Type IV
Voltage Mounting
MVOLT 1
120 1
208 1
Shipped included
(blank) Surface mount
Shipped separately 2
240 1
BBW
277 1
347
UT5
Surface-mounted
back box
Uptilt 5 degrees
480
Shipped installed
PE
Photoelectric cell, button type 4, 5
SF
Single fuse (120, 277, 347V) 4
DF
Double fuse (208, 240, 480V) 4
DMG 0-10V dimming driver (no controls)
ELCW Emergency battery backup 6
WLU Wet location door for up orientation 7
PIR
Motion/ambient light sensor 8
Shipped separately
VG
Vandal guard
WG
Wire guard
Emergency Battery Operation
The emergency battery backup (ELCW option) is integral to the luminaire - no external housing required! This design provides reliable
emergency operation while maintaining the aesthetics of the product.
All ELCW configurations include an independent secondary driver with an integral relay to immediately detect AC power loss. Dual light
engines are wired in parallel so both engines operate in emergency mode and provide additional component redundancy. These design
features meet various interpretations of NFPA 70/NEC 2008 - 700.16
The emergency battery will power the luminaire for a minimum duration of 90 minutes (maximum duration of three hours) from the time
supply power is lost, per International Building Code Section 1006 and NFPA 101 Life Safety Code Section 7.9, provided luminaires are
mounted at an appropriate height and illuminate an open space with no major obstructions.
The examples at right show illuminance
of 1 fc average and 0.1 fc minimum of
the single-engine Type IV product in
emergency mode.
8’ MH
12’ MH
WST LED 1 10A700/40K SR4 MVOLT ELCW
10’ x 10’ Gridlines
8’ and 12’ Mounting Height
Finish (required)
Options3
Dark bronze
Black
Natural aluminum
White
Sandstone
Textured dark bronze
Textured black
Textured natural aluminum
Textured white
Textured sandstone
NOTES
1 MVOLT driver operates on any line voltage from
120-277V (50/60 Hz). Specify 120, 208, 240 or
277 options only when ordering with photocell
(PE option) or fusing (SF, DF options).
2 May also be ordered separately as an accessory.
Ex: WSBBW DDBXD U. Must specify finish.
3 Must be ordered with fixture; cannot be field
installed.
4 Not available with MVOLT option. Button
photocell (PE) can be ordered with a dedicated
voltage option. Single fuse (SF) requires 120,
277 or 347 voltage option. Double fuse (DF)
requires 208, 240 or 480 voltage option.
5 Not available with 480V option. Not available
with motion/ambient light sensor (PIR).
6 Integral battery pack is rated for -20° to 60°C
operating temperature. ELCW warranty is 3-year
period. Not available with 347V or 480V. Not
available with WLU.
7 WLU not available with PIR or ELCW.
8 Specifies the SensorSwitch SFOD-7-ODP
control (photocell included); see Motion Sensor
Guide for details. Not available with “PE”
option (button type photocell). Dimming driver
standard. Not available with WLU, VG or WG.
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com
© 2011-2014 Acuity Brands Lighting, Inc. All rights reserved.
DDBXD
DBLXD
DNAXD
DWHXD
DSSXD
DDBTXD
DBLBXD
DNATXD
DWHGXD
DSSTXD
Submitting Agency:
Description:
WST LED 2 10A700/40K SR4 MVOLT DDBXD
Project:
Notes:
COLOROW ELEMENTARY SCHOOL
Type:
BB
Performance Data
Lumen Ambient Temperature (LAT) Multipliers
Lumen Output
Use these factors to determine relative lumen output for average ambient temperatures
from 0-40°C (32-104°F).
Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative
of the configurations shown, within the tolerances allowed by Lighting Facts. Actual wattage may differ by +/- 8% when operating
between 120-480V +/- 10%. Actual performance may differ as a result of end-user environment and application.
Light
Engines
1
(10 LEDs)
2
(20 LEDs)
1
Drive
Current
(mA)
System
Watts
(MVOLT1)
Performance
Package
700
10A700/--K
24W
700
10A700/--K
47W
Ambient
40K
(4000K, 70 CRI)
Dist.
Type
SR2
SR3
SR4
SR2
SR3
SR4
Nominal
Lumens
B
U
G
LPW
2,005
2,029
1,959
3,944
4,028
3,851
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
84
84
82
84
86
82
Lumen Multiplier
0°C
32°F
1.10
10°C
20°C
25°C
30°C
40°C
50°F
68°F
77°F
86°F
104°F
1.06
1.02
1.00
0.98
0.92
Projected LED Lumen Maintenance
Data references the extrapolated performance projections for the WST LED 2 10A700
platform in a 25°C ambient, based on 10,000 hours of LED testing (tested per IESNA LM80-08 and projected per IESNA TM-21-11).
See electrical load chart for 347/480V system watts.
To calculate LLF, use the lumen maintenance factor that corresponds to the desired number
of operating hours below. For other lumen maintenance values, contact factory.
Operating Hours
0
25,000
50,000
100,000
Lumen Maintenance
Factor
1.0
0.94
0.88
0.77
Electrical Load
Current (A)
Light Drive Current
Engines
(mA)
1
Photometric Diagrams
1
700
2
700
System
Watts
120
208
240
277
347
24W
0.24
0.14
0.12
0.1
-
-
29W 1
-
-
-
-
0.09
0.07
47W
0.44
0.27
0.23
0.20
-
-
53W 1
-
-
-
-
0.17
0.12
Higher wattage is due to electrical losses from step-down transformer.
To see complete photometric reports or download .ies files for this product, visit Lithonia Lighting’s WST LED homepage.
2
1
0
1
2
3
4
0.1 fc
3
0.5 fc
2
1.0 fc
1
0
-1
-2
-3
SR2
-4
4
4
3
2
1
0
1
2
3
4
3
2
1
0
-1
-2
-3
SR3
-4
4
Distribution overlay comparison to 175W metal halide.
4
3
2
1
0
1
2
3
4
3
2
1
0
-1
-2
-3
SR4
-4
4
Test No. 2489033-4 tested in accordance with
IESNA LM-79-08.
3
Test No. 2489033-5 tested in accordance with
IESNA LM-79-08.
4
Test No. 2489033-6 tested in accordance with
IESNA LM-79-08.
Isofootcandle plots for the WST LED 2 10A700/40K SR2, SR3, and SR4. Distances are in units of mounting height (12’).
LEGEND
480
LEGEND
WST
LED,
0.5 fc
WST
HID,
0.5 fc
10’ W Sidewalk
LLDs:
WST HID = 0.72
WST LED = 0.95
WST LED:
47W
WST HID:
213W
WST LED 2 10A700 40K SR4,
WST 175M FT Probe, 12’ Mounting Ht
FEATURES & SPECIFICATIONS
INTENDED USE
The classic architectural shape of the WST LED was designed for applications such as hospitals,
schools, malls, restaurants, and commercial buildings. The long life LEDs and driver make this
luminaire nearly maintenance-free.
CONSTRUCTION
The single-piece die-cast aluminum housing integrates secondary heat sinks to optimize thermal
transfer from the internal light engine heat sinks and promote long life. The driver is mounted in
direct contact with the casting for a low operating temperature and long life. The die-cast door
frame is fully gasketed with a one-piece solid silicone gasket to keep out moisture and dust,
providing an IP65 rating for the luminaire.
FINISH
Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish
that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage
process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate
changes without cracking or peeling. Standard Super Durable colors include dark bronze, black,
natural aluminum, sandstone and white. Available in textured and non-textured finishes.
OPTICS
Precision-molded acrylic lenses are engineered for superior distribution, uniformity, and spacing
in wall-mount applications. Light engines are 4000K (70 CRI). The WST LED has zero uplight and
qualifies as a Nighttime Friendly™ product, meaning it is consistent with the LEED® and Green
Globes™ criteria for eliminating wasteful uplight.
ELECTRICAL
Light engine(s) consist of 10 high-efficacy LEDs mounted to a metal core circuit board and
integral aluminum heat sinks to maximize heat dissipation and promote long life (100,000
hrs at 25°C, L77). Class 2 electronic driver has a power factor >90%, THD <20%. Easilyserviceable surge protection device meets a minimum Category B (per ANSI/IEEE C62.41.2).
Calculated values include direct and interreflected components.
INSTALLATION
A universal mounting plate with integral mounting support arms allows the fixture to hinge
down for easy access while making wiring connections. The integral bubble level on the
mounting plate provides assistance for level placement on every installation.
LISTINGS
CSA certified to U.S. and Canadian standards. Light engines are IP66 rated; luminaire is IP65
rated and suitable for wet locations when mounted with the lenses down. WLU option offers
wet location listing in “up”orientation. Rated for -30°C minimum ambient.
DesignLights Consortium® (DLC) qualified product. Not all versions of this product may
be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org to
confirm which versions are qualified.
WARRANTY
Five year limited warranty. Full warranty terms located at www.acuitybrands.com/
CustomerResources/Terms_and_conditions.aspx.
Note: Specifications subject to change without notice.
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com
© 2011-2014 Acuity Brands Lighting, Inc. All rights reserved.
Rev. 07/21/14
led 1 sr3 ELCW plan view
Scale 1" = 40'
Illumination Systems, Inc
5 South Kalamath Street
Denver CO 80223
Phone: (303) 295-2900
Fax: (303) 293-8337
Date: Apr 10, 2015
Job Name
Colorow Elementary
ISI15-38614
Denver CO
Bid Date
Apr 1, 2015
Submittal Date
Apr 9, 2015
Apr 10, 2015
RE:
Colorow Elementary
Denver CO
Type
CC1
CC1
CC1
CC1
AIM
AIM
AIM
LCP
$LV
$K
$K
VS
VS1
$VS
PP
PP1
SA
SU
FF00010
MFG
Part
McGraw Edison
GLEON-AE-09-LED-E1-SL4-BZ-HSS
McGraw Edison
SSS5A30SFN1
McGraw Edison
GLEON-AE-09-LED-E1-SL2-BZ-HSS
McGraw Edison
SSS5A30SFN1
Cooper Controls
AIM L NW
Item Note: FACTORY DRAWINGS TO FOLLOW
Cooper Controls
AIM OEMPRTL
Item Note: FACTORY DRAWINGS TO FOLLOW
Cooper Controls
AIM START UP
Cooper Controls
CK4-277NO
Item Note: FACTORY DRAWINGS TO FOLLOW
Cooper Controls
GMDS-W
Item Note: FACTORY DRAWINGS TO FOLLOW
Cooper Controls
MOM-KEY
Item Note: FACTORY DRAWINGS TO FOLLOW
Cooper Controls
KEY116
Item Note: FACTORY DRAWINGS TO FOLLOW
Cooper Controls
OAC-DT-1000-R
Item Note: FACTORY DRAWINGS TO FOLLOW
Cooper Controls
OAC-DT-2000-R
Item Note: FACTORY DRAWINGS TO FOLLOW
Cooper Controls
ONW-D-1001-MV-W
Item Note: FACTORY DRAWINGS TO FOLLOW
Cooper Controls
OSP20-RDH
Item Note: FACTORY DRAWINGS TO FOLLOW
Cooper Controls
SP20-MV
Item Note: FACTORY DRAWINGS TO FOLLOW
Cooper Controls
KEEPER NW KIT
Item Note: FACTORY DRAWINGS TO FOLLOW
Cooper Controls
FACTORY STARTUP
www.illumsys.com
Page 1/1
Catalog Number:
Type:
GLEON-AE-09-LED-E1-SL4-BZ-HSS
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes:
CC1
ISI15-38614
McGRAW-EDISON ®
DES C R I P TI O N
The Galleon™ LED luminaire delivers exceptional performance in a
highly scalable, low-profile design. Patented, high-efficiency AccuLED
Optics™ system provides uniform and energy conscious illumination to
walkways, parking lots, roadways, building areas and security lighting
applications. IP66 rated.
Type
Catalog #
Project
Date
Comments
Prepared by
S PEC I F I C A TI O N F EA T U R ES
C on st r ucti on
Extruded aluminum driver
enclosure thermally isolated from
Light Squares for optimal thermal
performance. Heavy-wall, diecast aluminum end caps enclose
housing and die-cast aluminum
heat sinks. A unique, patent
pending interlocking housing and
heat sink provides scalability with
superior structural rigidity. 3G
vibration tested. Optional toolless hardware available for ease
of entry into electrical chamber.
Housing is IP66 rated.
Op ti cs
Choice of 16 patented, highefficiency AccuLED Optics. The
optics are precisely designed to
shape the distribution maximizing
efficiency and application spacing.
AccuLED Optics create consistent
distributions with the scalability
to meet customized application
requirements. Offered standard in
4000K (+/- 275K) CCT and minimum
70 CRI. Optional 6000K CCT and
3000K CCT. For the ultimate level
of spill light control, an optional
house side shield accessory can
be field or factory installed. The
house side shield is designed to
seamlessly integrate with the SL2,
SL3, SL4 or AFL optics.
Ele ctric al
LED drivers are mounted to
removable tray assembly for ease
of maintenance. 120-277V 50/60Hz,
347V 60Hz or 480V 60Hz operation.
Standard with 0-10V dimming.
Shipped standard with Cooper
Lighting proprietary circuit module
designed to withstand 10kV of
transient line surge. The Galleon
LED luminaire is suitable for
operation in -40°C to 40°C ambient
environments. For applications
with ambient temperatures
exceeding 40°C, specify the HA
(High Ambient) option. Light
Squares are IP66 rated. Greater
than 90% lumen maintenance
expected at 60,000 hours. Available
in standard 1A drive current and
optional 530mA and 700mA drive
currents.
easy positioning of fixture during
assembly. Designed for pole or
wall mounting. When mounting
two or more luminaires at 90° or
120° apart, the EA extended arm
may be required. Refer to the arm
mounting requirement table on
page 3. Round pole top adapter
included. For wall mounting,
specify wall mount bracket option.
3G vibration rated.
Finish
Housing finished in super durable
TGIC polyester powder coat paint,
2.5 mil nominal thickness for
superior protection against fade
and wear. Heat sink is powder
coated black. Standard colors
include black, bronze, grey,
white, dark platinum and graphite
metallic. RAL and custom color
matches available. Consult the
McGraw-Edison Architectural
Colors brochure for the complete
selection.
GLEON
GALLEON LED
1-10 Light Squares
Solid State LED
AREA/SITE LUMINAIRE
Warr anty
Five-year warranty.
Moun ting
Extruded aluminum arm includes
internal bolt guides allowing for
DI MEN S I O N S
POLE MOUNT
3-15/16"
[100mm]
21-3/4" [553mm]
“A”
"B"
WALL MOUNT
CERTIFICATION DATA
7" [178mm]
21-3/4" [553mm]
10-5/32"
[256mm]
6-3/16"
[157mm]
2-7/16"
[61mm]
DIMENSION DATA
Number of
Light Squares
UL/cUL Wet Location Listed
ISO 9001
LM79 / LM80 Compliant
3G Vibration Rated
IP66 Rated
DesignLights Consortium® Qualified*
“A” Width
“B” Standard
Arm Length
“B” Optional
Arm Length 1
Weight with Arm
(lbs.)
EPA with Arm 2
(Sq. Ft.)
1-4
15-1/2" (394mm)
7" (178mm)
10" (254mm)
33 (15.0 kgs.)
0.96
5-6
21-5/8" (549mm)
7" (178mm)
10" (254mm)
44 (20.0 kgs.)
1.00
7-8
27-5/8" (702mm)
7" (178mm)
13" (330mm)
54 (24.5 kgs.)
1.07
9-10
33-3/4" (857mm)
7" (178mm)
16" (406mm)
63 (28.6 kgs.)
1.12
ENERGY DATA
Electronic LED Driver
>0.9 Power Factor
<20% Total Harmonic Distortion
120V-277V 50/60Hz
347V & 480V 60Hz
-40°C Min. Temperature
40°C Max. Temperature
50°C Max. Temperature (HA Option)
TEM
D
ER
C
*www.designlights.org
YS
S
S
NOTES: 1 Extended arm option may be required when mounting two or more fixtures per pole at 90° or 120°. Refer to arm mounting
requirement table. 2 EPA calculated with optional arm length.
TIFIE
ADH140426
2015-01-29 14:53:26
Catalog Number:
Type:
GLEON-AE-09-LED-E1-SL4-BZ-HSS
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes:
CC1
ISI15-38614
G L E ON G A L L E O N L E D
O PTI C OR I E N TA T IO N
DR ILL ING P AT T E R N
Street Side
Street Side
TYPE "N"
Street Side
2"
[51mm]
1-3/4"
[44mm]
3/4" [19mm]
Diameter
Hole
7/8" [22mm]
(2) 9/16" [14mm]
Diameter
Holes
House Side
House Side
House Side
Optics Rotated Left @ 90° [L90]
Standard
Optics Rotated Right @ 90° [R90]
OPTI C AL D I S TR I B U TI O N S
Asymmetric Area Distributions
T2
(Type II)
SL2
(Type II with Spill Control)
T3
(Type III)
SL3
(Type III with Spill Control)
T4FT
(Type IV Forward Throw)
Asymmetric Roadway Distributions
RW
(Rectangular Wide Type I)
T2R
(Type II Roadway)
T4W
(Type IV Wide)
SL4
(Type IV with Spill Control)
Symmertric Distributions
T3R
(Type III Roadway)
5NQ
(Type V Square Narrow)
5MQ
(Type V Square Medium)
5WQ
(Type V Square Wide)
Specialized Distributions
AFL
(Automotive Frontline)
SLL
(90° Spill Light Eliminator Left)
SLR
(90° Spill Light Eliminator Right)
AR M M O U N T I N G RE Q U I R EM EN T S
Configuration
90° Apart
120° Apart
GLEON-AE-01
7" Arm
(Standard)
7" Arm
(Standard)
GLEON-AE-02
7" Arm
(Standard)
7" Arm
(Standard)
GLEON-AE-03
7" Arm
(Standard)
7" Arm
(Standard)
GLEON-AE-04
7" Arm
(Standard)
7" Arm
(Standard)
GLEON-AE-05
10" Extended Arm
(Required)
7" Arm
(Standard)
GLEON-AE-06
10" Extended Arm
(Required)
7" Arm
(Standard)
GLEON-AE-07
13" Extended Arm
(Required)
13" Extended Arm
(Required)
GLEON-AE-08
13" Extended Arm
(Required)
13" Extended Arm
(Required)
GLEON-AE-09
16" Extended Arm
(Required)
16" Extended Arm
(Required)
GLEON-AE-10
16" Extended Arm
(Required)
16" Extended Arm
(Required)
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
4 @ 90°
2 @ 180°
Triple1
2 @ 90°
Triple2
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
2 @ 120°
ADH140426
2015-01-29 14:53:26
Catalog Number:
Type:
GLEON-AE-09-LED-E1-SL4-BZ-HSS
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes:
CC1
ISI15-38614
G L E ON G A L L E O N L E D
N O MI N A L P O W E R A N D L U M EN S (1 A )
Number of Light Squares
Drive Current
Nominal Power (Watts)
1
2
3
4
5
6
7
8
9
10
1A
1A
1A
1A
1A
1A
1A
1A
1A
1A
56
107
157
213
264
315
370
421
475
528
Input Current @ 120V (A)
0.47
0.90
1.31
1.79
2.21
2.64
3.09
3.51
3.96
4.41
Input Current @ 208V (A)
0.28
0.51
0.74
1.02
1.25
1.48
1.76
1.99
2.22
2.50
Input Current @ 240V (A)
0.25
0.45
0.65
0.90
1.10
1.30
1.55
1.75
1.95
2.20
Input Current @ 277V (A)
0.23
0.41
0.59
0.82
1.00
1.18
1.41
1.59
1.77
2.00
Optics
T2
T2R
T3
T3R
T4FT
T4W
SL2
SL3
SL4
5NQ
5MQ
5WQ
SLL/SLR
RW
AFL
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
5,272
10,303
15,373
20,313
25,168
30,118
35,618
40,357
45,018
49,842
B1-U0-G1
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B4-U0-G5
B4-U0-G5
5,597
10,938
16,321
21,565
26,719
31,974
37,813
42,844
47,792
52,914
B1-U0-G1
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B4-U0-G4
B4-U0-G5
5,374
10,501
15,669
20,704
25,652
30,697
36,303
41,134
45,884
50,802
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B4-U0-G5
B4-U0-G5
5,493
10,735
16,017
21,164
26,222
31,379
37,110
42,048
46,904
51,930
B1-U0-G2
B1-U0-G2
B2-U0-G3
B2-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
5,405
10,562
15,760
20,824
25,801
30,875
36,514
41,372
46,150
51,096
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
5,335
10,426
15,556
20,555
25,468
30,476
36,042
40,838
45,554
50,436
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B4-U0-G5
B4-U0-G5
B4-U0-G5
5,263
10,285
15,347
20,278
25,124
30,066
35,556
40,288
44,940
49,756
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B4-U0-G5
B4-U0-G5
5,373
10,500
15,667
20,701
25,649
30,693
36,298
41,128
45,878
50,794
B1-U0-G2
B2-U0-G3
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
5,105
9,976
14,886
19,669
24,370
29,163
34,488
39,078
43,591
48,262
B1-U0-G2
B1-U0-G3
B1-U0-G3
B2-U0-G4
B2-U0-G4
B2-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
5,542
10,830
16,160
21,352
26,455
31,658
37,439
42,421
47,320
52,392
B2-U0-G1
B3-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G3
B5-U0-G4
5,644
11,029
16,457
21,745
26,942
32,241
38,128
43,202
48,191
53,356
B3-U0-G1
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G4
B5-U0-G4
B5-U0-G4
B5-U0-G4
B5-U0-G5
5,659
11,059
16,501
21,803
27,014
32,327
38,230
43,317
48,320
53,498
B3-U0-G1
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G4
B5-U0-G4
B5-U0-G4
B5-U0-G5
B5-U0-G5
B5-U0-G5
4,722
9,227
13,767
18,191
22,539
26,971
31,897
36,141
40,315
44,635
B1-U0-G2
B1-U0-G3
B2-U0-G3
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
5,492
10,732
16,014
21,159
26,216
31,372
37,101
42,038
46,893
51,918
B2-U0-G1
B3-U0-G1
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G3
B5-U0-G4
B5-U0-G4
5,512
10,771
16,072
21,236
26,311
31,486
37,236
42,191
47,063
52,107
B1-U0-G1
B1-U0-G1
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G4
* Nominal data for 4000K CCT.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADH140426
2015-01-29 14:53:26
Catalog Number:
Type:
GLEON-AE-09-LED-E1-SL4-BZ-HSS
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes:
CC1
ISI15-38614
G L E ON G A L L E O N L E D
NO M I NA L P O WE R A N D L U M E N S ( 7 0 0 M A )
Number of Light Squares
Drive Current
Nominal Power (Watts)
1
2
3
4
5
6
7
8
9
10
700mA
700mA
700mA
700mA
700mA
700mA
700mA
700mA
700mA
700mA
38
72
105
138
176
210
243
276
314
348
Input Current @ 120V (A)
0.32
0.59
0.86
1.14
1.45
1.72
2
2.28
2.58
2.86
Input Current @ 208V (A)
0.21
0.36
0.51
0.67
0.87
1.02
1.18
1.34
1.53
1.69
Input Current @ 240V (A)
0.19
0.32
0.45
0.59
0.77
0.90
1.04
1.18
1.35
1.49
Input Current @ 277V (A)
0.20
0.29
0.40
0.51
0.69
0.80
0.91
1.02
1.20
1.31
Optics
T2
T2R
T3
T3R
T4FT
T4W
SL2
SL3
SL4
5NQ
5MQ
5WQ
SLL/SLR
RW
AFL
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
3,854
7,531
11,237
14,847
18,395
22,013
26,033
29,497
32,904
36,430
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G4
4,091
7,995
11,929
15,762
19,529
23,370
27,638
31,316
34,932
38,676
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
3,928
7,676
11,453
15,133
18,750
22,437
26,534
30,065
33,537
37,132
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
4,015
7,846
11,707
15,469
19,166
22,936
27,124
30,733
34,283
37,957
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G3
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
3,951
7,720
11,519
15,221
18,858
22,567
26,688
30,240
33,732
37,347
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G3
B2-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B3-U0-G5
3,900
7,620
11,370
15,024
18,615
22,276
26,343
29,849
33,296
36,864
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B3-U0-G5
3,847
7,518
11,217
14,821
18,364
21,975
25,988
29,447
32,847
36,368
B1-U0-G1
B1-U0-G2
B2-U0-G3
B2-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
3,927
7,675
11,451
15,131
18,747
22,434
26,531
30,061
33,533
37,126
B1-U0-G1
B1-U0-G2
B2-U0-G3
B2-U0-G3
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
3,731
7,292
10,880
14,376
17,812
21,315
25,208
28,562
31,861
35,275
B1-U0-G2
B1-U0-G2
B1-U0-G3
B1-U0-G3
B2-U0-G4
B2-U0-G4
B2-U0-G4
B2-U0-G5
B2-U0-G5
B3-U0-G5
4,051
7,916
11,811
15,606
19,336
23,139
27,365
31,006
34,587
38,294
B2-U0-G1
B3-U0-G1
B3-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G2
B5-U0-G3
B5-U0-G3
4,125
8,062
12,029
15,894
19,692
23,565
27,869
31,577
35,224
38,999
B2-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G3
B5-U0-G4
B5-U0-G4
4,136
8,083
12,061
15,936
19,745
23,628
27,943
31,661
35,318
39,103
B3-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G4
B5-U0-G4
B5-U0-G4
B5-U0-G4
3,451
6,744
10,063
13,296
16,474
19,714
23,314
26,416
29,467
32,625
B1-U0-G1
B1-U0-G2
B1-U0-G3
B2-U0-G3
B2-U0-G3
B2-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
4,014
7,844
11,704
15,465
19,162
22,930
27,118
30,726
34,274
37,948
B2-U0-G1
B3-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G3
4,029
7,873
11,747
15,522
19,231
23,014
27,216
30,838
34,399
38,086
B1-U0-G1
B1-U0-G1
B2-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G3
* Nominal data for 4000K CCT.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADH140426
2015-01-29 14:53:26
Catalog Number:
Type:
GLEON-AE-09-LED-E1-SL4-BZ-HSS
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes:
CC1
ISI15-38614
G L E ON G A L L E O N L E D
NO M I NA L P O WE R A N D L U M E N S ( 5 3 0 M A )
Number of Light Squares
Drive Current
Nominal Power (Watts)
1
2
3
4
5
6
7
8
9
10
530mA
530mA
530mA
530mA
530mA
530mA
530mA
530mA
530mA
530mA
30
54
80
105
130
159
184
209
234
259
Input Current @ 120V (A)
0.25
0.45
0.66
0.86
1.07
1.32
1.52
1.72
1.93
2.14
Input Current @ 208V (A)
0.17
0.28
0.39
0.51
0.63
0.78
0.9
1.02
1.14
1.26
Input Current @ 240V (A)
0.17
0.25
0.35
0.45
0.55
0.70
0.80
0.90
1.00
1.10
Input Current @ 277V (A)
0.19
0.24
0.32
0.40
0.49
0.64
0.72
0.80
0.89
0.98
Optics
T2
T2R
T3
T3R
T4FT
T4W
SL2
SL3
SL4
5NQ
5MQ
5WQ
SLL/SLR
RW
AFL
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
3,079
6,017
8,978
11,862
14,697
17,588
20,800
23,567
26,289
29,106
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
3,269
6,388
9,531
12,593
15,603
18,672
22,082
25,020
27,909
30,900
B1-U0-G1
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G4
3,138
6,133
9,150
12,091
14,980
17,926
21,200
24,021
26,795
29,667
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
3,208
6,269
9,354
12,359
15,313
18,325
21,671
24,555
27,390
30,326
B1-U0-G1
B1-U0-G2
B1-U0-G2
B2-U0-G2
B2-U0-G3
B2-U0-G3
B2-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G4
3,156
6,168
9,203
12,161
15,067
18,030
21,323
24,160
26,950
29,839
B1-U0-G1
B1-U0-G2
B1-U0-G2
B2-U0-G2
B2-U0-G3
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
3,116
6,088
9,084
12,004
14,872
17,797
21,047
23,848
26,602
29,453
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
3,074
6,006
8,962
11,842
14,672
17,558
20,764
23,527
26,244
29,056
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G3
B2-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
3,138
6,132
9,149
12,089
14,978
17,924
21,197
24,018
26,791
29,662
B1-U0-G1
B1-U0-G2
B1-U0-G2
B2-U0-G3
B2-U0-G3
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G4
2,981
5,826
8,693
11,486
14,231
17,030
20,140
22,820
25,456
28,184
B0-U0-G1
B1-U0-G2
B1-U0-G3
B1-U0-G3
B1-U0-G3
B2-U0-G3
B2-U0-G4
B2-U0-G4
B2-U0-G4
B2-U0-G5
3,236
6,324
9,437
12,469
15,449
18,487
21,863
24,773
27,634
30,595
B1-U0-G0
B2-U0-G1
B3-U0-G1
B3-U0-G2
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G2
3,296
6,441
9,610
12,698
15,733
18,828
22,266
25,229
28,142
31,158
B2-U0-G1
B3-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G3
B5-U0-G3
3,305
6,458
9,636
12,732
15,775
18,878
22,325
25,296
28,217
31,241
B2-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G3
B5-U0-G4
B5-U0-G4
2,757
5,388
8,040
10,623
13,162
15,751
18,627
21,105
23,543
26,066
B1-U0-G1
B1-U0-G2
B1-U0-G2
B1-U0-G3
B2-U0-G3
B2-U0-G3
B2-U0-G3
B2-U0-G4
B3-U0-G4
B3-U0-G4
3,207
6,267
9,351
12,356
15,309
18,320
21,666
24,549
27,384
30,319
B2-U0-G1
B3-U0-G1
B3-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
3,219
6,290
9,385
12,401
15,365
18,387
21,745
24,638
27,484
30,429
B1-U0-G1
B1-U0-G1
B1-U0-G1
B2-U0-G2
B2-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G2
B3-U0-G3
B3-U0-G3
* Nominal data for 4000K CCT.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADH140426
2015-01-29 14:53:26
Catalog Number:
Type:
GLEON-AE-09-LED-E1-SL4-BZ-HSS
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes:
CC1
ISI15-38614
G L E ON G A L L E O N L E D
L U MEN M U L TI PL I ER
Ambient
Temperature
Lumen Multiplier
0°C
1.02
10°C
1.01
25°C
1.00
40°C
0.99
50°C
0.97
L U M E N M A IN TE NANCE
Ambient
Temperature
TM-21 Lumen
Maintenance
(60,000 Hours)
Theoretical L70
(Hours)
25°C
> 94%
> 350,000
40°C
> 93%
> 250,000
50°C
> 90%
> 170,000
O RDER I NG I N F O R M A T IO N
Sample Number: GLEON-AE-04-LED-E1-T3-GM-700
Product Family 1
Light Engine
GLEON=Galleon
AE=1A Drive
Current
Number of
Light Squares 2
01=1
02=2
03=3
04=4
05=5
06=6
07=7
08=8
09=9
10=10
Lamp Type
Voltage
Distribution
Color
Mounting
LED=Solid State
Light Emitting
Diodes
E1=120-277V
347=347V 3
480=480V 3, 4
T2=Type II
T2R=Type II Roadway
T3=Type III
T3R=Type III Roadway
T4FT=Type IV Forward Throw
T4W=Type IV Wide
5NQ=Type V Narrow
5MQ=Type V Square Medium
5WQ=Type V Square Wide
SL2=Type II w/Spill Control
SL3=Type III w/Spill Control
SL4=Type IV w/Spill Control
SLL=90° Spill Light Eliminator Left
SLR=90° Spill Light Eliminator Right
RW=Rectangular Wide Type I
AFL=Automotive Frontline
AP=Grey
BZ=Bronze
BK=Black
DP=Dark Platinum
GM=Graphite Metallic
WH=White
[Blank]=Arm for Round or
Square Pole
EA=Extended Arm 5
MA=Mast Arm Adapter 6
WM=Wall Mount
Options (Add as Suffix)
Accessories (Order Separately)
2L=Two Circuits 7, 8
7030=70 CRI 3000K 9
8030=80 CRI 3000K 10
7050=70 CRI 5000K 10
7060=70 CRI 6000K 9
530=Drive Current Factory Set to 530mA 10
700=Drive Current Factory Set to 700mA 10
F=Single Fuse (120, 277 or 347V. Must Specify Voltage)
FF=Double Fuse (208, 240 or 480V. Must Specify Voltage)
P=Button Type Photocontrol (120, 208, 240 or 277V)
PER7=NEMA 7-PIN Twistlock Photocontrol Receptacle
R=NEMA Twistlock Photocontrol Receptacle
HA=50°C High Ambient 8
MS/DIM-L08=Motion Sensor for Dimming Operation, Maximum 8' Mounting Height 12, 13, 14, 15, 16
MS/DIM-L20=Motion Sensor for Dimming Operation, 9' - 20' Mounting Height 12, 13, 14, 15, 17
MS/DIM-L40=Motion Sensor for Dimming Operation, 21' - 40' Mounting Height 12, 13, 14, 15, 18
MS/DIM-L40W=Motion Sensor for Dimming Operation, 21' - 40' Mounting Height (Wide Range) 12, 13, 14, 15, 19
MS/X-L08=Bi-Level Motion Sensor, Maximum 8' Mounting Height 12, 13, 14, 16, 20
MS/X-L20=Bi-Level Motion Sensor, 9' - 20' Mounting Height 12, 13, 14, 15, 17, 20
MS/X-L40=Bi-Level Motion Sensor, 21' - 40' Mounting Height 12, 13, 14, 15, 18, 20
MS/X-L40W=Bi-Level Motion Sensor, 21' - 40' Mounting Height (Wide Range) 12, 13, 14, 15, 19, 20
MS-L08=Motion Sensor for ON/OFF Operation, Maximum 8' Mounting Height 12, 13, 14, 15, 16
MS-L20=Motion Sensor for ON/OFF Operation, 9' - 20' Mounting Height 12, 13, 14, 15, 17
MS-L40=Motion Sensor for ON/OFF Operation, 21' - 40' Mounting Height 12, 13, 14, 15, 18
MS-L40W=Motion Sensor for ON/OFF Operation, 21' - 40' Mounting Height (Wide Range) 12, 13, 14, 15, 19
DIMRF-LW=LumaWatt Wireless Sensor, Wide Lens for 8' - 16' Mounting Height 21
DIMRF-LN=LumaWatt Wireless Sensor, Narrow Lens for 16' - 40' Mounting Height 21
L90=Optics Rotated 90° Left
R90=Optics Rotated 90° Right
MT=Factory Installed Mesh Top
TH=Tool-less Door Hardware
LCF=Light Square Trim Plate Painted to Match Housing 22
HSS=Factory Installed House Side Shield 23
OA/RA1016=NEMA Photocontrol Multi-Tap - 105-285V
OA/RA1027=NEMA Photocontrol - 480V
OA/RA1201=NEMA Photocontrol - 347V
OA/RA1013=Photocontrol Shorting Cap
OA/RA1014=120V Photocontrol
MA1252=10kV Surge Module Replacement
MA1036-XX=Single Tenon Adapter for 2-3/8" O.D. Tenon
MA1037-XX=2@180° Tenon Adapter for 2-3/8" O.D. Tenon
MA1197-XX=3@120° Tenon Adapter for 2-3/8" O.D. Tenon
MA1188-XX=4@90° Tenon Adapter for 2-3/8" O.D. Tenon
MA1189-XX=2@90° Tenon Adapter for 2-3/8" O.D. Tenon
MA1190-XX=3@90° Tenon Adapter for 2-3/8" O.D. Tenon
MA1191-XX=2@120° Tenon Adapter for 2-3/8" O.D. Tenon
MA1038-XX=Single Tenon Adapter for 3-1/2" O.D. Tenon
MA1039-XX=2@180° Tenon Adapter for 3-1/2" O.D. Tenon
MA1192-XX=3@120° Tenon Adapter for 3-1/2" O.D. Tenon
MA1193-XX=4@90° Tenon Adapter for 3-1/2" O.D. Tenon
MA1194-XX=2@90° Tenon Adapter for 3-1/2" O.D. Tenon
MA1195-XX=3@90° Tenon Adapter for 3-1/2" O.D. Tenon
FSIR-100=Wireless Configuration Tool for Occupancy Sensor 24
GLEON-MT1=Field Installed Mesh Top for 1-4 Light Squares
GLEON-MT2=Field Installed Mesh Top for 5-6 Light Squares
GLEON-MT3=Field Installed Mesh Top for 7-8 Light Squares
GLEON-MT4=Field Installed Mesh Top for 9-10 Light Squares
LS/HSS=Field Installed House Side Shield 23, 25
Notes:
1. DesignLights Consortium® Qualified. Refer to www.designlights.org Qualified Products List under Family Models for details.
2. Standard 4000K CCT and minimum 70 CRI.
3. Requires the use of a step down transformer when combined with MS/DIM, MS/X or DIMRF.
4. Not to be used with un-grounded systems.
5. May be required when two or more luminaires are oriented on a 90° or 120° drilling pattern. Refer to arm mounting requirement table.
6. Factory installed.
7. 2L is not available with MS, MS/X or MS/DIM at 347V or 480V. 2L in AE-02 through AE-04 requires a larger housing, normally used for AE-05 or AE-06. Extended arm option may be required when mounting two or more
fixtures per pole at 90° or 120°. Refer to arm mounting requirement table.
8. Not available with LumaWatt wireless sensors.
9. Extended lead times apply. Use dedicated IES files for 3000K and 6000K when performing layouts. These files are published on the Galleon luminaire product page on the website.
10. Extended lead times apply. For 8030, factor 7030 IES files x .92 (8% lumen loss). For 7050, use 7060 IES files.
11. 1 Amp standard. Use dedicated IES files for 530mA and 700mA when performing layouts. These files are published on the Galleon luminaire product page on the website.
12. Consult factory for more information.
13. Utilizes internal step down transformer when 347V or 480V is selected.
14. The FSIR-100 accessory is required to adjust parameters.
15. Not available with HA option.
16. Approximately 22' detection diameter at 8' mounting height.
17. Approximately 40' detection diameter at 20' mounting height.
18. Approximately 60' detection diameter at 40' mounting height.
19. Approximately 100' detection diameter at 40' mounting height.
20. Replace X with number of Light Squares operating in low output mode.
21. LumaWatt wireless sensors are factory installed only requiring network components RF-EM1, RF-GW1 and RF-ROUT1 in appropriate quantities. See www.cooperlighting.com for LumaWatt application information.
22. Not available with house side shield (HSS).
23. Only for use with SL2, SL3, SL4 and AFL distributions. The Light Square trim plate is painted black when the HSS option is selected.
24. This tool enables adjustment of parameters including high and low modes, sensitivity, time delay, cutoff and more. Consult your Eaton's Cooper Lighting business representative for additional details.
25. One required for each Light Square.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADH140426
2015-01-29 14:53:26
Catalog Number:
SSS5A30SFN1
Submitted by Illumination Systems, Inc
Job Name:
Type:
CC1
Colorow Elementary
Notes:
ISI15-38614
COOPER LIGHTING
Type
Catalog #
Project
Date
Comments
Prepared by
FE AT UR ES
•ASTM Grade steel base plate with ASTM A366 base cover
•Hand hole assembly 3" x 5" on 5" and 6" pole; and 2" x 4" on 4" pole
•10'-39' mounting heights
•Drilled or tenon (specify)
SSS SQUARE
STRAIGHT STEEL
ORDERING INFORMATION
SAMPLE NUMBER: SSS5A20SFM1XG
Product
Family
Shaft Size
(Inches) 1
Wall
Thickness
(Inches)
Mounting
Height
(Feet)
Base Type
Finish
Mounting Type
Number
and
Location
of Arms
Arm
Lengths
(Feet)
Options
(Add as Suffix)
SSS=Square
Straight
Steel
4=4"
5=5"
6=6"
A=0.120"
M=0.188"
X=0.250"
10=10'
15=15'
20=20'
25=25'
30=30'
35=35'
39=39'
S=Square
Steel
Base
F=Dark Bronze
G=Galvanized Steel
J=Summit White
K=Carbon Bronze
L=Dark Platinum
P=Primer Powder Coat
R=Hartford Green
S=Silver
T=Graphite Metallic
V=Grey
W=White
X=Custom Color
Y=Black
2=2-3/8" O.D. Tenon (4" Long)
3=3-1/2" O.D. Tenon (5" Long)
4=4" O.D. Tenon (6" Long)
5=3" O.D. Tenon (4" Long)
6=2-3/8" O.D. Tenon (6" Long)
7=4" O.D. Tenon (10" Long)
A=Type A Drilling
C=Type C Drilling
E=Type E Drilling
F=Type F Drilling
G=Type G Drilling
J=Type J Drilling
K=Type K Drilling
M=Type M Drilling
R=Type R Drilling
Z=Type Z Drilling
1=Single
2=2 at 180°
3=Triple 2
4=4 at 90°
5=2 at 90°
X=None
X=None
A=1/2" Tapped
Hub (Specify
location
desired)
B=3/4" Tapped
Hub (Specify
location
desired)
C=Convenience
Outlet 3
E=GFCI
Convenience
Outlet 3
G=Ground Lug
H=Additional Hand
Hole 4
L=Drilled for
Bumper Glitter
V=Vibration
Dampener
N=TYPE N DRILLING
NOTES: 1. All shaft sizes nominal. 2. Square poles are 3 at 90°, round poles are 3 at 120°. 3. Outlet is located 4' above base and on same side of pole as hand hole, unless specified otherwise. Receptacle
not included, provision only. 4. Additional hand hole is located 12" below pole top and 90° from standard hand hole location, unless otherwise specified.
DI ME N S I O N S
BC
Hand Hole
12-5/16"
D
BP
B
Base View
AB
Base
Size
(S)
H
See technical information.
WARNING: The use of unauthorized accessories such as banners, signs, cameras or pennants for which the pole was not designed voids the pole warranty from Eaton's Cooper Lighting business and may
result in pole failure causing serious injury or property damage. Upon request, Eaton's Cooper Lighting business will supply information regarding total loading capacity. The pole warranty from Eaton's
Cooper Lighting business is void unless poles are used and installed as a complete pole/luminaire combination. This warranty specifically excludes failure as the result of a third party act or omission, misuse,
unanticipated uses, fatigue failure or similar phenomena resulting from induced vibration, harmonic oscillation or resonance associated with movement of air currents around the product.
Specifications and dimensions subject to change without notice. Consult your Eaton's Cooper Lighting business representative or visit www.cooperlighting.com for available options, accessories and ordering
information.
ADH130493
2014-04-02 13:41:02
Catalog Number:
SSS5A30SFN1
Submitted by Illumination Systems, Inc
Job Name:
Type:
CC1
Colorow Elementary
Notes:
ISI15-38614
SS S S QUA R E S TR AI G H T S TE E L
Effective Projected Area (At Pole Top)
Mounting
Height
(Feet)
Catalog
Number 1, 2
Wall
Thickness
(Inches)
MH
Base
Square 3
(Inches)
Bolt
Circle
Diameter
(Inches)
Anchor
Bolt
Projection 3
(Inches)
Shaft
Size 3
(Inches)
Anchor
Bolt
Diameter
x
Length x
Hook
(Inches)
Net
Weight
(Pounds)
Maximum Effective Projected Area
(Square Feet) 4
Max.
Fixture
Load Includes
Bracket
(Pounds)
S
BC
BP
B
D x AB x H
80 mph
90 mph
100 mph
110 mph
10
SSS4A10S
0.120
10-1/2
11
4-1/2
4
3/4 x 25 x 3
85
30.0
22.0
17.0
13.0
100
15
SSS4A15S
0.120
10-1/2
11
4-1/2
4
3/4 x 25 x 3
118
15.0
11.5
8.7
6.5
100
20
SSS4A20S
0.120
10-1/2
11
4-1/2
4
3/4 x 25 x 3
150
8.7
5.9
3.9
2.5
150
20
SSS5A20S
0.120
10-1/2
11
4-1/2
5
3/4 x 25 x 3
183
15.4
11.1
7.9
5.5
150
25
SSS4A25S
0.120
10-1/2
11
4-1/2
4
3/4 x 25 x 3
181
3.7
1.7
0.3
--
200
25
SSS5A25S
0.120
10-1/2
11
5
5
3/4 x 25 x 3
222
9.3
6.0
3.5
1.6
200
25
SSS6A25S
0.120
12-1/2
12-1/2
5
6
1 x 36 x 4
284
9.9
6.1
3.5
1.2
200
30
SSS5A30S
0.120
10-1/2
11
4-1/2
5
3/4 x 25 x 3
260
4.7
2.1
--
--
200
30
SSS5M30S
0.188
10-1/2
11
4-1/2
5
3/4 x 25 x 3
392
10.4
6.4
3.5
1.5
200
30
SSS6A30S
0.120
12-1/2
12-1/2
5
6
1 x 36 x 4
330
4.3
1.4
--
--
200
30
SSS6M30S
0.188
12-1/2
12-1/2
5
6
1 x 36 x 4
489
19.0
13.0
8.7
5.6
200
35
SSS5M35S
0.188
10-1/2
11
4-1/2
5
3/4 x 25 x 3
453
5.8
2.8
--
--
200
35
SSS6M35S
0.188
12-1/2
12-1/2
5
6
1 x 36 x 4
564
12.8
7.2
3.7
1.0
200
35
SSS6X35S
0.250
12-1/2
12-1/2
5
6
1 x 36 x 4
738
16.5
11.0
6.8
3.5
200
39
SSS6M39S
0.188
12-1/2
12-1/2
5
6
1 x 36 x 4
618
7.3
3.0
--
--
300
39
SSS6X39S
0.250
12-1/2
12-1/2
5
6
1 x 36 x 4
816
13.0
7.0
3.7
0.8
300
Net
Weight
(Pounds)
Effective Projected Area (Two Feet Above Pole Top)
Mounting
Height
(Feet)
Catalog
Number 1, 2
Wall
Thickness
(Inches)
MH
Base
Square 3
(Inches)
Bolt
Circle
Diameter
(Inches)
Anchor
Bolt
Projection 3
(Inches)
Shaft
Size 3
(Inches)
Anchor
Bolt
Diameter
x
Length x
Hook
(Inches)
Maximum Effective Projected Area
(Square Feet) 4
Max.
Fixture
Load Includes
Bracket
(Pounds)
S
BC
BP
B
D x AB x H
80 mph
90 mph
100 mph
110 mph
10
SSS4A10S
0.120
10-1/2
11
4-1/2
4
3/4 x 25 x 3
85
23.0
17.5
14.0
11.0
100
15
SSS4A15S
0.120
10-1/2
11
4-1/2
4
3/4 x 25 x 3
118
13.4
10.0
7.5
5.7
100
20
SSS4A20S
0.120
10-1/2
11
4-1/2
4
3/4 x 25 x 3
150
7.6
5.2
3.4
2.1
150
20
SSS5A20S
0.120
10-1/2
11
4-1/2
5
3/4 x 25 x 3
183
13.8
9.9
7.1
4.9
150
25
SSS4A25S
0.120
10-1/2
11
4-1/2
4
3/4 x 25 x 3
181
3.4
1.6
0.3
--
200
25
SSS5A25S
0.120
10-1/2
11
5
5
3/4 x 25 x 3
222
8.5
5.5
3.2
1.5
200
25
SSS6A25S
0.120
12-1/2
12-1/2
5
6
1 x 36 x 4
284
9.1
5.6
3.0
1.2
200
30
SSS5A30S
0.120
10-1/2
11
4-1/2
5
3/4 x 25 x 3
260
1.8
--
--
--
200
30
SSS5M30S
0.188
10-1/2
11
4-1/2
5
3/4 x 25 x 3
392
9.6
5.9
1.9
0.2
200
30
SSS6A30S
0.120
12-1/2
12-1/2
5
6
1 x 36 x 4
330
4.1
1.3
--
--
200
30
SSS6M30S
0.188
12-1/2
12-1/2
5
6
1 x 36 x 4
489
18.5
12.5
8.4
5.3
200
35
SSS5M35S
0.188
10-1/2
11
4-1/2
5
3/4 x 25 x 3
453
5.5
2.4
--
--
200
35
SSS6M35S
0.188
12-1/2
12-1/2
5
6
1 x 36 x 4
564
11.8
7.0
3.5
1.0
200
35
SSS6X35S
0.250
12-1/2
12-1/2
5
6
1 x 36 x 4
738
16.0
10.5
6.4
3.4
200
39
SSS6M39S
0.188
12-1/2
12-1/2
5
6
1 x 36 x 4
618
7.0
2.4
--
--
300
39
SSS6X39S
0.250
12-1/2
12-1/2
5
6
1 x 36 x 4
816
12.0
6.7
3.0
0.5
300
NOTES:
1. Catalog number includes pole with hardware kit. Anchor bolts not included. Before installing, make sure proper anchor bolts and templates are obtained from Eaton's Cooper Lighting business.
2. Tenon size or machining for rectangular arms must be specified. Hand hole position relative to drill location.
3. Shaft size, base square, anchor bolts and projections may vary slightly. All dimensions nominal.
4. EPAs based on shaft properties with wind normal to flat. EPAs calculated using base wind velocity as indicated plus 30% gust factor.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADH130493
2014-04-02 13:41:02
Catalog Number:
Type:
GLEON-AE-09-LED-E1-SL2-BZ-HSS
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes:
CC1
ISI15-38614
McGRAW-EDISON ®
DES C R I P TI O N
The Galleon™ LED luminaire delivers exceptional performance in a
highly scalable, low-profile design. Patented, high-efficiency AccuLED
Optics™ system provides uniform and energy conscious illumination to
walkways, parking lots, roadways, building areas and security lighting
applications. IP66 rated.
Type
Catalog #
Project
Date
Comments
Prepared by
S PEC I F I C A TI O N F EA T U R ES
C on st r ucti on
Extruded aluminum driver
enclosure thermally isolated from
Light Squares for optimal thermal
performance. Heavy-wall, diecast aluminum end caps enclose
housing and die-cast aluminum
heat sinks. A unique, patent
pending interlocking housing and
heat sink provides scalability with
superior structural rigidity. 3G
vibration tested. Optional toolless hardware available for ease
of entry into electrical chamber.
Housing is IP66 rated.
Op ti cs
Choice of 16 patented, highefficiency AccuLED Optics. The
optics are precisely designed to
shape the distribution maximizing
efficiency and application spacing.
AccuLED Optics create consistent
distributions with the scalability
to meet customized application
requirements. Offered standard in
4000K (+/- 275K) CCT and minimum
70 CRI. Optional 6000K CCT and
3000K CCT. For the ultimate level
of spill light control, an optional
house side shield accessory can
be field or factory installed. The
house side shield is designed to
seamlessly integrate with the SL2,
SL3, SL4 or AFL optics.
Ele ctric al
LED drivers are mounted to
removable tray assembly for ease
of maintenance. 120-277V 50/60Hz,
347V 60Hz or 480V 60Hz operation.
Standard with 0-10V dimming.
Shipped standard with Cooper
Lighting proprietary circuit module
designed to withstand 10kV of
transient line surge. The Galleon
LED luminaire is suitable for
operation in -40°C to 40°C ambient
environments. For applications
with ambient temperatures
exceeding 40°C, specify the HA
(High Ambient) option. Light
Squares are IP66 rated. Greater
than 90% lumen maintenance
expected at 60,000 hours. Available
in standard 1A drive current and
optional 530mA and 700mA drive
currents.
easy positioning of fixture during
assembly. Designed for pole or
wall mounting. When mounting
two or more luminaires at 90° or
120° apart, the EA extended arm
may be required. Refer to the arm
mounting requirement table on
page 3. Round pole top adapter
included. For wall mounting,
specify wall mount bracket option.
3G vibration rated.
Finish
Housing finished in super durable
TGIC polyester powder coat paint,
2.5 mil nominal thickness for
superior protection against fade
and wear. Heat sink is powder
coated black. Standard colors
include black, bronze, grey,
white, dark platinum and graphite
metallic. RAL and custom color
matches available. Consult the
McGraw-Edison Architectural
Colors brochure for the complete
selection.
GLEON
GALLEON LED
1-10 Light Squares
Solid State LED
AREA/SITE LUMINAIRE
Warr anty
Five-year warranty.
Moun ting
Extruded aluminum arm includes
internal bolt guides allowing for
DI MEN S I O N S
POLE MOUNT
3-15/16"
[100mm]
21-3/4" [553mm]
“A”
"B"
WALL MOUNT
CERTIFICATION DATA
7" [178mm]
21-3/4" [553mm]
10-5/32"
[256mm]
6-3/16"
[157mm]
2-7/16"
[61mm]
DIMENSION DATA
Number of
Light Squares
UL/cUL Wet Location Listed
ISO 9001
LM79 / LM80 Compliant
3G Vibration Rated
IP66 Rated
DesignLights Consortium® Qualified*
“A” Width
“B” Standard
Arm Length
“B” Optional
Arm Length 1
Weight with Arm
(lbs.)
EPA with Arm 2
(Sq. Ft.)
1-4
15-1/2" (394mm)
7" (178mm)
10" (254mm)
33 (15.0 kgs.)
0.96
5-6
21-5/8" (549mm)
7" (178mm)
10" (254mm)
44 (20.0 kgs.)
1.00
7-8
27-5/8" (702mm)
7" (178mm)
13" (330mm)
54 (24.5 kgs.)
1.07
9-10
33-3/4" (857mm)
7" (178mm)
16" (406mm)
63 (28.6 kgs.)
1.12
ENERGY DATA
Electronic LED Driver
>0.9 Power Factor
<20% Total Harmonic Distortion
120V-277V 50/60Hz
347V & 480V 60Hz
-40°C Min. Temperature
40°C Max. Temperature
50°C Max. Temperature (HA Option)
TEM
D
ER
C
*www.designlights.org
YS
S
S
NOTES: 1 Extended arm option may be required when mounting two or more fixtures per pole at 90° or 120°. Refer to arm mounting
requirement table. 2 EPA calculated with optional arm length.
TIFIE
ADH140426
2015-01-29 14:53:26
Catalog Number:
Type:
GLEON-AE-09-LED-E1-SL2-BZ-HSS
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes:
CC1
ISI15-38614
G L E ON G A L L E O N L E D
O PTI C OR I E N TA T IO N
DR ILL ING P AT T E R N
Street Side
Street Side
TYPE "N"
Street Side
2"
[51mm]
1-3/4"
[44mm]
3/4" [19mm]
Diameter
Hole
7/8" [22mm]
(2) 9/16" [14mm]
Diameter
Holes
House Side
House Side
House Side
Optics Rotated Left @ 90° [L90]
Standard
Optics Rotated Right @ 90° [R90]
OPTI C AL D I S TR I B U TI O N S
Asymmetric Area Distributions
T2
(Type II)
SL2
(Type II with Spill Control)
T3
(Type III)
SL3
(Type III with Spill Control)
T4FT
(Type IV Forward Throw)
Asymmetric Roadway Distributions
RW
(Rectangular Wide Type I)
T2R
(Type II Roadway)
T4W
(Type IV Wide)
SL4
(Type IV with Spill Control)
Symmertric Distributions
T3R
(Type III Roadway)
5NQ
(Type V Square Narrow)
5MQ
(Type V Square Medium)
5WQ
(Type V Square Wide)
Specialized Distributions
AFL
(Automotive Frontline)
SLL
(90° Spill Light Eliminator Left)
SLR
(90° Spill Light Eliminator Right)
AR M M O U N T I N G RE Q U I R EM EN T S
Configuration
90° Apart
120° Apart
GLEON-AE-01
7" Arm
(Standard)
7" Arm
(Standard)
GLEON-AE-02
7" Arm
(Standard)
7" Arm
(Standard)
GLEON-AE-03
7" Arm
(Standard)
7" Arm
(Standard)
GLEON-AE-04
7" Arm
(Standard)
7" Arm
(Standard)
GLEON-AE-05
10" Extended Arm
(Required)
7" Arm
(Standard)
GLEON-AE-06
10" Extended Arm
(Required)
7" Arm
(Standard)
GLEON-AE-07
13" Extended Arm
(Required)
13" Extended Arm
(Required)
GLEON-AE-08
13" Extended Arm
(Required)
13" Extended Arm
(Required)
GLEON-AE-09
16" Extended Arm
(Required)
16" Extended Arm
(Required)
GLEON-AE-10
16" Extended Arm
(Required)
16" Extended Arm
(Required)
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
4 @ 90°
2 @ 180°
Triple1
2 @ 90°
Triple2
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
2 @ 120°
ADH140426
2015-01-29 14:53:26
Catalog Number:
Type:
GLEON-AE-09-LED-E1-SL2-BZ-HSS
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes:
CC1
ISI15-38614
G L E ON G A L L E O N L E D
N O MI N A L P O W E R A N D L U M EN S (1 A )
Number of Light Squares
Drive Current
Nominal Power (Watts)
1
2
3
4
5
6
7
8
9
10
1A
1A
1A
1A
1A
1A
1A
1A
1A
1A
56
107
157
213
264
315
370
421
475
528
Input Current @ 120V (A)
0.47
0.90
1.31
1.79
2.21
2.64
3.09
3.51
3.96
4.41
Input Current @ 208V (A)
0.28
0.51
0.74
1.02
1.25
1.48
1.76
1.99
2.22
2.50
Input Current @ 240V (A)
0.25
0.45
0.65
0.90
1.10
1.30
1.55
1.75
1.95
2.20
Input Current @ 277V (A)
0.23
0.41
0.59
0.82
1.00
1.18
1.41
1.59
1.77
2.00
Optics
T2
T2R
T3
T3R
T4FT
T4W
SL2
SL3
SL4
5NQ
5MQ
5WQ
SLL/SLR
RW
AFL
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
5,272
10,303
15,373
20,313
25,168
30,118
35,618
40,357
45,018
49,842
B1-U0-G1
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B4-U0-G5
B4-U0-G5
5,597
10,938
16,321
21,565
26,719
31,974
37,813
42,844
47,792
52,914
B1-U0-G1
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B4-U0-G4
B4-U0-G5
5,374
10,501
15,669
20,704
25,652
30,697
36,303
41,134
45,884
50,802
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B4-U0-G5
B4-U0-G5
5,493
10,735
16,017
21,164
26,222
31,379
37,110
42,048
46,904
51,930
B1-U0-G2
B1-U0-G2
B2-U0-G3
B2-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
5,405
10,562
15,760
20,824
25,801
30,875
36,514
41,372
46,150
51,096
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
5,335
10,426
15,556
20,555
25,468
30,476
36,042
40,838
45,554
50,436
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B4-U0-G5
B4-U0-G5
B4-U0-G5
5,263
10,285
15,347
20,278
25,124
30,066
35,556
40,288
44,940
49,756
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B4-U0-G5
B4-U0-G5
5,373
10,500
15,667
20,701
25,649
30,693
36,298
41,128
45,878
50,794
B1-U0-G2
B2-U0-G3
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
5,105
9,976
14,886
19,669
24,370
29,163
34,488
39,078
43,591
48,262
B1-U0-G2
B1-U0-G3
B1-U0-G3
B2-U0-G4
B2-U0-G4
B2-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
5,542
10,830
16,160
21,352
26,455
31,658
37,439
42,421
47,320
52,392
B2-U0-G1
B3-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G3
B5-U0-G4
5,644
11,029
16,457
21,745
26,942
32,241
38,128
43,202
48,191
53,356
B3-U0-G1
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G4
B5-U0-G4
B5-U0-G4
B5-U0-G4
B5-U0-G5
5,659
11,059
16,501
21,803
27,014
32,327
38,230
43,317
48,320
53,498
B3-U0-G1
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G4
B5-U0-G4
B5-U0-G4
B5-U0-G5
B5-U0-G5
B5-U0-G5
4,722
9,227
13,767
18,191
22,539
26,971
31,897
36,141
40,315
44,635
B1-U0-G2
B1-U0-G3
B2-U0-G3
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B3-U0-G5
B3-U0-G5
5,492
10,732
16,014
21,159
26,216
31,372
37,101
42,038
46,893
51,918
B2-U0-G1
B3-U0-G1
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G3
B5-U0-G4
B5-U0-G4
5,512
10,771
16,072
21,236
26,311
31,486
37,236
42,191
47,063
52,107
B1-U0-G1
B1-U0-G1
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G4
* Nominal data for 4000K CCT.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADH140426
2015-01-29 14:53:26
Catalog Number:
Type:
GLEON-AE-09-LED-E1-SL2-BZ-HSS
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes:
CC1
ISI15-38614
G L E ON G A L L E O N L E D
NO M I NA L P O WE R A N D L U M E N S ( 7 0 0 M A )
Number of Light Squares
Drive Current
Nominal Power (Watts)
1
2
3
4
5
6
7
8
9
10
700mA
700mA
700mA
700mA
700mA
700mA
700mA
700mA
700mA
700mA
38
72
105
138
176
210
243
276
314
348
Input Current @ 120V (A)
0.32
0.59
0.86
1.14
1.45
1.72
2
2.28
2.58
2.86
Input Current @ 208V (A)
0.21
0.36
0.51
0.67
0.87
1.02
1.18
1.34
1.53
1.69
Input Current @ 240V (A)
0.19
0.32
0.45
0.59
0.77
0.90
1.04
1.18
1.35
1.49
Input Current @ 277V (A)
0.20
0.29
0.40
0.51
0.69
0.80
0.91
1.02
1.20
1.31
Optics
T2
T2R
T3
T3R
T4FT
T4W
SL2
SL3
SL4
5NQ
5MQ
5WQ
SLL/SLR
RW
AFL
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
3,854
7,531
11,237
14,847
18,395
22,013
26,033
29,497
32,904
36,430
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G4
4,091
7,995
11,929
15,762
19,529
23,370
27,638
31,316
34,932
38,676
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
3,928
7,676
11,453
15,133
18,750
22,437
26,534
30,065
33,537
37,132
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
4,015
7,846
11,707
15,469
19,166
22,936
27,124
30,733
34,283
37,957
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G3
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
3,951
7,720
11,519
15,221
18,858
22,567
26,688
30,240
33,732
37,347
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G3
B2-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B3-U0-G5
3,900
7,620
11,370
15,024
18,615
22,276
26,343
29,849
33,296
36,864
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
B3-U0-G5
3,847
7,518
11,217
14,821
18,364
21,975
25,988
29,447
32,847
36,368
B1-U0-G1
B1-U0-G2
B2-U0-G3
B2-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
3,927
7,675
11,451
15,131
18,747
22,434
26,531
30,061
33,533
37,126
B1-U0-G1
B1-U0-G2
B2-U0-G3
B2-U0-G3
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
3,731
7,292
10,880
14,376
17,812
21,315
25,208
28,562
31,861
35,275
B1-U0-G2
B1-U0-G2
B1-U0-G3
B1-U0-G3
B2-U0-G4
B2-U0-G4
B2-U0-G4
B2-U0-G5
B2-U0-G5
B3-U0-G5
4,051
7,916
11,811
15,606
19,336
23,139
27,365
31,006
34,587
38,294
B2-U0-G1
B3-U0-G1
B3-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G2
B5-U0-G3
B5-U0-G3
4,125
8,062
12,029
15,894
19,692
23,565
27,869
31,577
35,224
38,999
B2-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G3
B5-U0-G4
B5-U0-G4
4,136
8,083
12,061
15,936
19,745
23,628
27,943
31,661
35,318
39,103
B3-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G4
B5-U0-G4
B5-U0-G4
B5-U0-G4
3,451
6,744
10,063
13,296
16,474
19,714
23,314
26,416
29,467
32,625
B1-U0-G1
B1-U0-G2
B1-U0-G3
B2-U0-G3
B2-U0-G3
B2-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
B3-U0-G5
4,014
7,844
11,704
15,465
19,162
22,930
27,118
30,726
34,274
37,948
B2-U0-G1
B3-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G3
4,029
7,873
11,747
15,522
19,231
23,014
27,216
30,838
34,399
38,086
B1-U0-G1
B1-U0-G1
B2-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G3
* Nominal data for 4000K CCT.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADH140426
2015-01-29 14:53:26
Catalog Number:
Type:
GLEON-AE-09-LED-E1-SL2-BZ-HSS
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes:
CC1
ISI15-38614
G L E ON G A L L E O N L E D
NO M I NA L P O WE R A N D L U M E N S ( 5 3 0 M A )
Number of Light Squares
Drive Current
Nominal Power (Watts)
1
2
3
4
5
6
7
8
9
10
530mA
530mA
530mA
530mA
530mA
530mA
530mA
530mA
530mA
530mA
30
54
80
105
130
159
184
209
234
259
Input Current @ 120V (A)
0.25
0.45
0.66
0.86
1.07
1.32
1.52
1.72
1.93
2.14
Input Current @ 208V (A)
0.17
0.28
0.39
0.51
0.63
0.78
0.9
1.02
1.14
1.26
Input Current @ 240V (A)
0.17
0.25
0.35
0.45
0.55
0.70
0.80
0.90
1.00
1.10
Input Current @ 277V (A)
0.19
0.24
0.32
0.40
0.49
0.64
0.72
0.80
0.89
0.98
Optics
T2
T2R
T3
T3R
T4FT
T4W
SL2
SL3
SL4
5NQ
5MQ
5WQ
SLL/SLR
RW
AFL
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
Lumens
BUG Rating
3,079
6,017
8,978
11,862
14,697
17,588
20,800
23,567
26,289
29,106
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
3,269
6,388
9,531
12,593
15,603
18,672
22,082
25,020
27,909
30,900
B1-U0-G1
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G4
3,138
6,133
9,150
12,091
14,980
17,926
21,200
24,021
26,795
29,667
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
3,208
6,269
9,354
12,359
15,313
18,325
21,671
24,555
27,390
30,326
B1-U0-G1
B1-U0-G2
B1-U0-G2
B2-U0-G2
B2-U0-G3
B2-U0-G3
B2-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G4
3,156
6,168
9,203
12,161
15,067
18,030
21,323
24,160
26,950
29,839
B1-U0-G1
B1-U0-G2
B1-U0-G2
B2-U0-G2
B2-U0-G3
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
3,116
6,088
9,084
12,004
14,872
17,797
21,047
23,848
26,602
29,453
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G2
B2-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G5
3,074
6,006
8,962
11,842
14,672
17,558
20,764
23,527
26,244
29,056
B1-U0-G1
B1-U0-G2
B2-U0-G2
B2-U0-G3
B2-U0-G3
B3-U0-G3
B3-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
3,138
6,132
9,149
12,089
14,978
17,924
21,197
24,018
26,791
29,662
B1-U0-G1
B1-U0-G2
B1-U0-G2
B2-U0-G3
B2-U0-G3
B2-U0-G3
B3-U0-G4
B3-U0-G4
B3-U0-G4
B3-U0-G4
2,981
5,826
8,693
11,486
14,231
17,030
20,140
22,820
25,456
28,184
B0-U0-G1
B1-U0-G2
B1-U0-G3
B1-U0-G3
B1-U0-G3
B2-U0-G3
B2-U0-G4
B2-U0-G4
B2-U0-G4
B2-U0-G5
3,236
6,324
9,437
12,469
15,449
18,487
21,863
24,773
27,634
30,595
B1-U0-G0
B2-U0-G1
B3-U0-G1
B3-U0-G2
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G2
3,296
6,441
9,610
12,698
15,733
18,828
22,266
25,229
28,142
31,158
B2-U0-G1
B3-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G3
B5-U0-G3
3,305
6,458
9,636
12,732
15,775
18,878
22,325
25,296
28,217
31,241
B2-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
B5-U0-G3
B5-U0-G3
B5-U0-G4
B5-U0-G4
2,757
5,388
8,040
10,623
13,162
15,751
18,627
21,105
23,543
26,066
B1-U0-G1
B1-U0-G2
B1-U0-G2
B1-U0-G3
B2-U0-G3
B2-U0-G3
B2-U0-G3
B2-U0-G4
B3-U0-G4
B3-U0-G4
3,207
6,267
9,351
12,356
15,309
18,320
21,666
24,549
27,384
30,319
B2-U0-G1
B3-U0-G1
B3-U0-G1
B3-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B4-U0-G2
B5-U0-G3
3,219
6,290
9,385
12,401
15,365
18,387
21,745
24,638
27,484
30,429
B1-U0-G1
B1-U0-G1
B1-U0-G1
B2-U0-G2
B2-U0-G2
B2-U0-G2
B2-U0-G2
B3-U0-G2
B3-U0-G3
B3-U0-G3
* Nominal data for 4000K CCT.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADH140426
2015-01-29 14:53:26
Catalog Number:
Type:
GLEON-AE-09-LED-E1-SL2-BZ-HSS
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes:
CC1
ISI15-38614
G L E ON G A L L E O N L E D
L U MEN M U L TI PL I ER
Ambient
Temperature
Lumen Multiplier
0°C
1.02
10°C
1.01
25°C
1.00
40°C
0.99
50°C
0.97
L U M E N M A IN TE NANCE
Ambient
Temperature
TM-21 Lumen
Maintenance
(60,000 Hours)
Theoretical L70
(Hours)
25°C
> 94%
> 350,000
40°C
> 93%
> 250,000
50°C
> 90%
> 170,000
O RDER I NG I N F O R M A T IO N
Sample Number: GLEON-AE-04-LED-E1-T3-GM-700
Product Family 1
Light Engine
GLEON=Galleon
AE=1A Drive
Current
Number of
Light Squares 2
01=1
02=2
03=3
04=4
05=5
06=6
07=7
08=8
09=9
10=10
Lamp Type
Voltage
Distribution
Color
Mounting
LED=Solid State
Light Emitting
Diodes
E1=120-277V
347=347V 3
480=480V 3, 4
T2=Type II
T2R=Type II Roadway
T3=Type III
T3R=Type III Roadway
T4FT=Type IV Forward Throw
T4W=Type IV Wide
5NQ=Type V Narrow
5MQ=Type V Square Medium
5WQ=Type V Square Wide
SL2=Type II w/Spill Control
SL3=Type III w/Spill Control
SL4=Type IV w/Spill Control
SLL=90° Spill Light Eliminator Left
SLR=90° Spill Light Eliminator Right
RW=Rectangular Wide Type I
AFL=Automotive Frontline
AP=Grey
BZ=Bronze
BK=Black
DP=Dark Platinum
GM=Graphite Metallic
WH=White
[Blank]=Arm for Round or
Square Pole
EA=Extended Arm 5
MA=Mast Arm Adapter 6
WM=Wall Mount
Options (Add as Suffix)
Accessories (Order Separately)
2L=Two Circuits 7, 8
7030=70 CRI 3000K 9
8030=80 CRI 3000K 10
7050=70 CRI 5000K 10
7060=70 CRI 6000K 9
530=Drive Current Factory Set to 530mA 10
700=Drive Current Factory Set to 700mA 10
F=Single Fuse (120, 277 or 347V. Must Specify Voltage)
FF=Double Fuse (208, 240 or 480V. Must Specify Voltage)
P=Button Type Photocontrol (120, 208, 240 or 277V)
PER7=NEMA 7-PIN Twistlock Photocontrol Receptacle
R=NEMA Twistlock Photocontrol Receptacle
HA=50°C High Ambient 8
MS/DIM-L08=Motion Sensor for Dimming Operation, Maximum 8' Mounting Height 12, 13, 14, 15, 16
MS/DIM-L20=Motion Sensor for Dimming Operation, 9' - 20' Mounting Height 12, 13, 14, 15, 17
MS/DIM-L40=Motion Sensor for Dimming Operation, 21' - 40' Mounting Height 12, 13, 14, 15, 18
MS/DIM-L40W=Motion Sensor for Dimming Operation, 21' - 40' Mounting Height (Wide Range) 12, 13, 14, 15, 19
MS/X-L08=Bi-Level Motion Sensor, Maximum 8' Mounting Height 12, 13, 14, 16, 20
MS/X-L20=Bi-Level Motion Sensor, 9' - 20' Mounting Height 12, 13, 14, 15, 17, 20
MS/X-L40=Bi-Level Motion Sensor, 21' - 40' Mounting Height 12, 13, 14, 15, 18, 20
MS/X-L40W=Bi-Level Motion Sensor, 21' - 40' Mounting Height (Wide Range) 12, 13, 14, 15, 19, 20
MS-L08=Motion Sensor for ON/OFF Operation, Maximum 8' Mounting Height 12, 13, 14, 15, 16
MS-L20=Motion Sensor for ON/OFF Operation, 9' - 20' Mounting Height 12, 13, 14, 15, 17
MS-L40=Motion Sensor for ON/OFF Operation, 21' - 40' Mounting Height 12, 13, 14, 15, 18
MS-L40W=Motion Sensor for ON/OFF Operation, 21' - 40' Mounting Height (Wide Range) 12, 13, 14, 15, 19
DIMRF-LW=LumaWatt Wireless Sensor, Wide Lens for 8' - 16' Mounting Height 21
DIMRF-LN=LumaWatt Wireless Sensor, Narrow Lens for 16' - 40' Mounting Height 21
L90=Optics Rotated 90° Left
R90=Optics Rotated 90° Right
MT=Factory Installed Mesh Top
TH=Tool-less Door Hardware
LCF=Light Square Trim Plate Painted to Match Housing 22
HSS=Factory Installed House Side Shield 23
OA/RA1016=NEMA Photocontrol Multi-Tap - 105-285V
OA/RA1027=NEMA Photocontrol - 480V
OA/RA1201=NEMA Photocontrol - 347V
OA/RA1013=Photocontrol Shorting Cap
OA/RA1014=120V Photocontrol
MA1252=10kV Surge Module Replacement
MA1036-XX=Single Tenon Adapter for 2-3/8" O.D. Tenon
MA1037-XX=2@180° Tenon Adapter for 2-3/8" O.D. Tenon
MA1197-XX=3@120° Tenon Adapter for 2-3/8" O.D. Tenon
MA1188-XX=4@90° Tenon Adapter for 2-3/8" O.D. Tenon
MA1189-XX=2@90° Tenon Adapter for 2-3/8" O.D. Tenon
MA1190-XX=3@90° Tenon Adapter for 2-3/8" O.D. Tenon
MA1191-XX=2@120° Tenon Adapter for 2-3/8" O.D. Tenon
MA1038-XX=Single Tenon Adapter for 3-1/2" O.D. Tenon
MA1039-XX=2@180° Tenon Adapter for 3-1/2" O.D. Tenon
MA1192-XX=3@120° Tenon Adapter for 3-1/2" O.D. Tenon
MA1193-XX=4@90° Tenon Adapter for 3-1/2" O.D. Tenon
MA1194-XX=2@90° Tenon Adapter for 3-1/2" O.D. Tenon
MA1195-XX=3@90° Tenon Adapter for 3-1/2" O.D. Tenon
FSIR-100=Wireless Configuration Tool for Occupancy Sensor 24
GLEON-MT1=Field Installed Mesh Top for 1-4 Light Squares
GLEON-MT2=Field Installed Mesh Top for 5-6 Light Squares
GLEON-MT3=Field Installed Mesh Top for 7-8 Light Squares
GLEON-MT4=Field Installed Mesh Top for 9-10 Light Squares
LS/HSS=Field Installed House Side Shield 23, 25
Notes:
1. DesignLights Consortium® Qualified. Refer to www.designlights.org Qualified Products List under Family Models for details.
2. Standard 4000K CCT and minimum 70 CRI.
3. Requires the use of a step down transformer when combined with MS/DIM, MS/X or DIMRF.
4. Not to be used with un-grounded systems.
5. May be required when two or more luminaires are oriented on a 90° or 120° drilling pattern. Refer to arm mounting requirement table.
6. Factory installed.
7. 2L is not available with MS, MS/X or MS/DIM at 347V or 480V. 2L in AE-02 through AE-04 requires a larger housing, normally used for AE-05 or AE-06. Extended arm option may be required when mounting two or more
fixtures per pole at 90° or 120°. Refer to arm mounting requirement table.
8. Not available with LumaWatt wireless sensors.
9. Extended lead times apply. Use dedicated IES files for 3000K and 6000K when performing layouts. These files are published on the Galleon luminaire product page on the website.
10. Extended lead times apply. For 8030, factor 7030 IES files x .92 (8% lumen loss). For 7050, use 7060 IES files.
11. 1 Amp standard. Use dedicated IES files for 530mA and 700mA when performing layouts. These files are published on the Galleon luminaire product page on the website.
12. Consult factory for more information.
13. Utilizes internal step down transformer when 347V or 480V is selected.
14. The FSIR-100 accessory is required to adjust parameters.
15. Not available with HA option.
16. Approximately 22' detection diameter at 8' mounting height.
17. Approximately 40' detection diameter at 20' mounting height.
18. Approximately 60' detection diameter at 40' mounting height.
19. Approximately 100' detection diameter at 40' mounting height.
20. Replace X with number of Light Squares operating in low output mode.
21. LumaWatt wireless sensors are factory installed only requiring network components RF-EM1, RF-GW1 and RF-ROUT1 in appropriate quantities. See www.cooperlighting.com for LumaWatt application information.
22. Not available with house side shield (HSS).
23. Only for use with SL2, SL3, SL4 and AFL distributions. The Light Square trim plate is painted black when the HSS option is selected.
24. This tool enables adjustment of parameters including high and low modes, sensitivity, time delay, cutoff and more. Consult your Eaton's Cooper Lighting business representative for additional details.
25. One required for each Light Square.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADH140426
2015-01-29 14:53:26
Catalog Number:
SSS5A30SFN1
Submitted by Illumination Systems, Inc
Job Name:
Type:
CC1
Colorow Elementary
Notes:
ISI15-38614
COOPER LIGHTING
Type
Catalog #
Project
Date
Comments
Prepared by
FE AT UR ES
•ASTM Grade steel base plate with ASTM A366 base cover
•Hand hole assembly 3" x 5" on 5" and 6" pole; and 2" x 4" on 4" pole
•10'-39' mounting heights
•Drilled or tenon (specify)
SSS SQUARE
STRAIGHT STEEL
ORDERING INFORMATION
SAMPLE NUMBER: SSS5A20SFM1XG
Product
Family
Shaft Size
(Inches) 1
Wall
Thickness
(Inches)
Mounting
Height
(Feet)
Base Type
Finish
Mounting Type
Number
and
Location
of Arms
Arm
Lengths
(Feet)
Options
(Add as Suffix)
SSS=Square
Straight
Steel
4=4"
5=5"
6=6"
A=0.120"
M=0.188"
X=0.250"
10=10'
15=15'
20=20'
25=25'
30=30'
35=35'
39=39'
S=Square
Steel
Base
F=Dark Bronze
G=Galvanized Steel
J=Summit White
K=Carbon Bronze
L=Dark Platinum
P=Primer Powder Coat
R=Hartford Green
S=Silver
T=Graphite Metallic
V=Grey
W=White
X=Custom Color
Y=Black
2=2-3/8" O.D. Tenon (4" Long)
3=3-1/2" O.D. Tenon (5" Long)
4=4" O.D. Tenon (6" Long)
5=3" O.D. Tenon (4" Long)
6=2-3/8" O.D. Tenon (6" Long)
7=4" O.D. Tenon (10" Long)
A=Type A Drilling
C=Type C Drilling
E=Type E Drilling
F=Type F Drilling
G=Type G Drilling
J=Type J Drilling
K=Type K Drilling
M=Type M Drilling
R=Type R Drilling
Z=Type Z Drilling
1=Single
2=2 at 180°
3=Triple 2
4=4 at 90°
5=2 at 90°
X=None
X=None
A=1/2" Tapped
Hub (Specify
location
desired)
B=3/4" Tapped
Hub (Specify
location
desired)
C=Convenience
Outlet 3
E=GFCI
Convenience
Outlet 3
G=Ground Lug
H=Additional Hand
Hole 4
L=Drilled for
Bumper Glitter
V=Vibration
Dampener
N=TYPE N DRILLING
NOTES: 1. All shaft sizes nominal. 2. Square poles are 3 at 90°, round poles are 3 at 120°. 3. Outlet is located 4' above base and on same side of pole as hand hole, unless specified otherwise. Receptacle
not included, provision only. 4. Additional hand hole is located 12" below pole top and 90° from standard hand hole location, unless otherwise specified.
DI ME N S I O N S
BC
Hand Hole
12-5/16"
D
BP
B
Base View
AB
Base
Size
(S)
H
See technical information.
WARNING: The use of unauthorized accessories such as banners, signs, cameras or pennants for which the pole was not designed voids the pole warranty from Eaton's Cooper Lighting business and may
result in pole failure causing serious injury or property damage. Upon request, Eaton's Cooper Lighting business will supply information regarding total loading capacity. The pole warranty from Eaton's
Cooper Lighting business is void unless poles are used and installed as a complete pole/luminaire combination. This warranty specifically excludes failure as the result of a third party act or omission, misuse,
unanticipated uses, fatigue failure or similar phenomena resulting from induced vibration, harmonic oscillation or resonance associated with movement of air currents around the product.
Specifications and dimensions subject to change without notice. Consult your Eaton's Cooper Lighting business representative or visit www.cooperlighting.com for available options, accessories and ordering
information.
ADH130493
2014-04-02 13:41:02
Catalog Number:
SSS5A30SFN1
Submitted by Illumination Systems, Inc
Job Name:
Type:
CC1
Colorow Elementary
Notes:
ISI15-38614
SS S S QUA R E S TR AI G H T S TE E L
Effective Projected Area (At Pole Top)
Mounting
Height
(Feet)
Catalog
Number 1, 2
Wall
Thickness
(Inches)
MH
Base
Square 3
(Inches)
Bolt
Circle
Diameter
(Inches)
Anchor
Bolt
Projection 3
(Inches)
Shaft
Size 3
(Inches)
Anchor
Bolt
Diameter
x
Length x
Hook
(Inches)
Net
Weight
(Pounds)
Maximum Effective Projected Area
(Square Feet) 4
Max.
Fixture
Load Includes
Bracket
(Pounds)
S
BC
BP
B
D x AB x H
80 mph
90 mph
100 mph
110 mph
10
SSS4A10S
0.120
10-1/2
11
4-1/2
4
3/4 x 25 x 3
85
30.0
22.0
17.0
13.0
100
15
SSS4A15S
0.120
10-1/2
11
4-1/2
4
3/4 x 25 x 3
118
15.0
11.5
8.7
6.5
100
20
SSS4A20S
0.120
10-1/2
11
4-1/2
4
3/4 x 25 x 3
150
8.7
5.9
3.9
2.5
150
20
SSS5A20S
0.120
10-1/2
11
4-1/2
5
3/4 x 25 x 3
183
15.4
11.1
7.9
5.5
150
25
SSS4A25S
0.120
10-1/2
11
4-1/2
4
3/4 x 25 x 3
181
3.7
1.7
0.3
--
200
25
SSS5A25S
0.120
10-1/2
11
5
5
3/4 x 25 x 3
222
9.3
6.0
3.5
1.6
200
25
SSS6A25S
0.120
12-1/2
12-1/2
5
6
1 x 36 x 4
284
9.9
6.1
3.5
1.2
200
30
SSS5A30S
0.120
10-1/2
11
4-1/2
5
3/4 x 25 x 3
260
4.7
2.1
--
--
200
30
SSS5M30S
0.188
10-1/2
11
4-1/2
5
3/4 x 25 x 3
392
10.4
6.4
3.5
1.5
200
30
SSS6A30S
0.120
12-1/2
12-1/2
5
6
1 x 36 x 4
330
4.3
1.4
--
--
200
30
SSS6M30S
0.188
12-1/2
12-1/2
5
6
1 x 36 x 4
489
19.0
13.0
8.7
5.6
200
35
SSS5M35S
0.188
10-1/2
11
4-1/2
5
3/4 x 25 x 3
453
5.8
2.8
--
--
200
35
SSS6M35S
0.188
12-1/2
12-1/2
5
6
1 x 36 x 4
564
12.8
7.2
3.7
1.0
200
35
SSS6X35S
0.250
12-1/2
12-1/2
5
6
1 x 36 x 4
738
16.5
11.0
6.8
3.5
200
39
SSS6M39S
0.188
12-1/2
12-1/2
5
6
1 x 36 x 4
618
7.3
3.0
--
--
300
39
SSS6X39S
0.250
12-1/2
12-1/2
5
6
1 x 36 x 4
816
13.0
7.0
3.7
0.8
300
Net
Weight
(Pounds)
Effective Projected Area (Two Feet Above Pole Top)
Mounting
Height
(Feet)
Catalog
Number 1, 2
Wall
Thickness
(Inches)
MH
Base
Square 3
(Inches)
Bolt
Circle
Diameter
(Inches)
Anchor
Bolt
Projection 3
(Inches)
Shaft
Size 3
(Inches)
Anchor
Bolt
Diameter
x
Length x
Hook
(Inches)
Maximum Effective Projected Area
(Square Feet) 4
Max.
Fixture
Load Includes
Bracket
(Pounds)
S
BC
BP
B
D x AB x H
80 mph
90 mph
100 mph
110 mph
10
SSS4A10S
0.120
10-1/2
11
4-1/2
4
3/4 x 25 x 3
85
23.0
17.5
14.0
11.0
100
15
SSS4A15S
0.120
10-1/2
11
4-1/2
4
3/4 x 25 x 3
118
13.4
10.0
7.5
5.7
100
20
SSS4A20S
0.120
10-1/2
11
4-1/2
4
3/4 x 25 x 3
150
7.6
5.2
3.4
2.1
150
20
SSS5A20S
0.120
10-1/2
11
4-1/2
5
3/4 x 25 x 3
183
13.8
9.9
7.1
4.9
150
25
SSS4A25S
0.120
10-1/2
11
4-1/2
4
3/4 x 25 x 3
181
3.4
1.6
0.3
--
200
25
SSS5A25S
0.120
10-1/2
11
5
5
3/4 x 25 x 3
222
8.5
5.5
3.2
1.5
200
25
SSS6A25S
0.120
12-1/2
12-1/2
5
6
1 x 36 x 4
284
9.1
5.6
3.0
1.2
200
30
SSS5A30S
0.120
10-1/2
11
4-1/2
5
3/4 x 25 x 3
260
1.8
--
--
--
200
30
SSS5M30S
0.188
10-1/2
11
4-1/2
5
3/4 x 25 x 3
392
9.6
5.9
1.9
0.2
200
30
SSS6A30S
0.120
12-1/2
12-1/2
5
6
1 x 36 x 4
330
4.1
1.3
--
--
200
30
SSS6M30S
0.188
12-1/2
12-1/2
5
6
1 x 36 x 4
489
18.5
12.5
8.4
5.3
200
35
SSS5M35S
0.188
10-1/2
11
4-1/2
5
3/4 x 25 x 3
453
5.5
2.4
--
--
200
35
SSS6M35S
0.188
12-1/2
12-1/2
5
6
1 x 36 x 4
564
11.8
7.0
3.5
1.0
200
35
SSS6X35S
0.250
12-1/2
12-1/2
5
6
1 x 36 x 4
738
16.0
10.5
6.4
3.4
200
39
SSS6M39S
0.188
12-1/2
12-1/2
5
6
1 x 36 x 4
618
7.0
2.4
--
--
300
39
SSS6X39S
0.250
12-1/2
12-1/2
5
6
1 x 36 x 4
816
12.0
6.7
3.0
0.5
300
NOTES:
1. Catalog number includes pole with hardware kit. Anchor bolts not included. Before installing, make sure proper anchor bolts and templates are obtained from Eaton's Cooper Lighting business.
2. Tenon size or machining for rectangular arms must be specified. Hand hole position relative to drill location.
3. Shaft size, base square, anchor bolts and projections may vary slightly. All dimensions nominal.
4. EPAs based on shaft properties with wind normal to flat. EPAs calculated using base wind velocity as indicated plus 30% gust factor.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADH130493
2014-04-02 13:41:02
Catalog Number:
AIM L NW
Submitted by Illumination Systems, Inc
Job Name:
Type:
AIM
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
Technical Data
Effective September 19, 2014
AIM – Automation Interface Module
Catalog#
Prepared by
Project
Date
Comments
Type
Overview
The Automation Interface Module is the solution to interface
a lighting control system to various HVAC industry standard
communication protocols.
Features
Seamless system integration
BACnet protocol
Johnson Controls N2 protocol
LonWorks protocol
Modbus protocol
Communication LEDs for system diagnostics
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
AIM L NW
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
Type:
AIM
ISI15-38614
Technical Data 
September 2014
Specifications
Enclosure Size
Power
Operating
Environment
3.5”H x 2.5”W x 1”D
120 VAC
Temperature: 32°F to 122°F (0°C to 50°C)
Description/Operation
The Automation Interface Module (AIM) supports all of the
commonly employed building automation communication protocol
standards including BACnet, LonWorks, Johnson Controls N2 and
more. The AIM unit permits data sharing between building control
systems for effortless building control integration.
Installation
The AIM connects to the panel network or directly via RS-232
connection. When connected, the AIM unit becomes an addressable
node on the network. Direct connection would be employed for
stand-alone controller applications.
Wiring Diagram
2
www.coopercontrol.com
AIM – Automation Interface Module


Catalog Number:
AIM L NW
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
Type:
AIM
ISI15-38614
Technical Data 
AIM – Automation Interface Module


September 2014
Ordering
All Automation Interface Modules require a Logic Board (AIM
OEMPRTL). The logic board is shipped separately from the enclosure
and is listed as a separate line item. When ordering any of the below
models, you must also order the AIM OEMPRTL (required with each
AIM-*-*). When ordering specify BAS protocol and panel interface.
See next/back page for Ordering details.
AIM B NW
Product
Installation Type
AIM = Automation Interface Module
NW = Network (ControlKeeper Family)
SA = Stand Alone (LiteKeeper 16 & 32)
Protocol Type
B =
N =
L =
M =
BACnet (1200 points)
N2 (256 points)
LON (1200 points)
Modbus (1200 points)
Additional Options
Catalog #
AIM OEMPRTL
Description
Automation Interface Module (AIM) Logic Board Required
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Controls Business
203 Cooper Circle
Peachtree City, GA 30269
coopercontrol.com
© 2014 Eaton
All Rights Reserved
Printed in USA
Publication No. ACC131632
September 19, 2014
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Catalog Number:
AIM OEMPRTL
Submitted by Illumination Systems, Inc
Job Name:
Type:
AIM
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
Technical Data
Effective September 19, 2014
AIM – Automation Interface Module
Catalog#
Prepared by
Project
Date
Comments
Type
Overview
The Automation Interface Module is the solution to interface
a lighting control system to various HVAC industry standard
communication protocols.
Features
Seamless system integration
BACnet protocol
Johnson Controls N2 protocol
LonWorks protocol
Modbus protocol
Communication LEDs for system diagnostics
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
AIM OEMPRTL
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
Type:
AIM
ISI15-38614
Technical Data 
September 2014
Specifications
Enclosure Size
Power
Operating
Environment
3.5”H x 2.5”W x 1”D
120 VAC
Temperature: 32°F to 122°F (0°C to 50°C)
Description/Operation
The Automation Interface Module (AIM) supports all of the
commonly employed building automation communication protocol
standards including BACnet, LonWorks, Johnson Controls N2 and
more. The AIM unit permits data sharing between building control
systems for effortless building control integration.
Installation
The AIM connects to the panel network or directly via RS-232
connection. When connected, the AIM unit becomes an addressable
node on the network. Direct connection would be employed for
stand-alone controller applications.
Wiring Diagram
2
www.coopercontrol.com
AIM – Automation Interface Module


Catalog Number:
AIM OEMPRTL
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
Type:
AIM
ISI15-38614
Technical Data 
AIM – Automation Interface Module


September 2014
Ordering
All Automation Interface Modules require a Logic Board (AIM
OEMPRTL). The logic board is shipped separately from the enclosure
and is listed as a separate line item. When ordering any of the below
models, you must also order the AIM OEMPRTL (required with each
AIM-*-*). When ordering specify BAS protocol and panel interface.
See next/back page for Ordering details.
AIM B NW
Product
Installation Type
AIM = Automation Interface Module
NW = Network (ControlKeeper Family)
SA = Stand Alone (LiteKeeper 16 & 32)
Protocol Type
B =
N =
L =
M =
BACnet (1200 points)
N2 (256 points)
LON (1200 points)
Modbus (1200 points)
Additional Options
Catalog #
AIM OEMPRTL
Description
Automation Interface Module (AIM) Logic Board Required
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Controls Business
203 Cooper Circle
Peachtree City, GA 30269
coopercontrol.com
© 2014 Eaton
All Rights Reserved
Printed in USA
Publication No. ACC131632
September 19, 2014
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
AIM START UP
Colorow Elementary
Notes:
Type:
AIM
ISI15-38614
Electrical Contractor,
Thank you for requesting information regarding the startup and training for a lighting
control system by Eaton’s Cooper Controls. The enclosed information should be
reviewed and completed immediately to ensure timely completion of your project.
Startup appears as a line item on the Bill of Material for this project, and the system will
be completely field-tested by a factory-authorized service person within the time allotted
(see reference document on page 5 for full description of system startup and training).
Complete all related documents and return via fax at 800-954-7016 or via email to
ControlTechSupport@Eaton.com
Eaton requires 21 days notice from receipt of completed paperwork in order to
schedule startup.
For All Systems:
Please review the following items:
•
Pre-startup checklist. This confirms that the project is ready for startup.
•
All electrical services and other hardware pertaining to the lighting project should be
completely installed at the time of the startup. A complete installation means that all
loads have been tested for continuity and freedom of short circuits, and that all
control wiring is connected and terminated. We will need access to all controlled
areas of the building and the assistance of a project electrician to check out the
system.
•
Please insure that all persons involved with the maintenance and operation of the
system can be present for training and instruction.
o 1 hour - hardware demonstration and familiarization.
o 1-2 hours – software demonstration and familiarization.
•
Relay and Dimming Panel Forms. Please complete the appropriate system
worksheet per panel, with the desired programming for each panel. Link to
Greengate Relay Panel Form. Link to iLumin Dimming Panel Form.
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
AIM START UP
Type:
AIM
Colorow Elementary
Notes:
ISI15-38614
For Greengate Systems:
• If the system includes GDS switches, please complete the GDS Switch Station Form
to record the desired programming for these switches. Please indicate which panel
the switch is wired to, as well as the reference number of the switch, and which
relays each button should control. If there are special programming requests such as
after-hours timers or other special interactions not defined in the sequence of
operations, please also indicate this.
•
If the system includes an Ethernet Interface Module (EIM) for remote
connection/diagnostics, please complete the Remote Connection Form. Please give
this form to the Network Administrator, so that they may provide us with the
necessary network information.
•
If the system includes an Automation Interface Module (AIM) for BMS integration,
please complete the BMS Integration Form to include the information that will allow
us to configure this device. The desired communications parameters/settings are on
the second page of this worksheet and should be provided by the BMS integrator.
•
If the system includes VisionTouch Software on site please provide the following:
o AUTOCAD drawings in electronic format which depict the backgrounds you
desire for this graphical screen interface.
o Indication of which zones you wish to control.
For iLumin Systems:
•
•
•
•
If the system includes a SI-2-NA for A/V integration, the integrator should be present
at the time of commissioning to ensure connectivity at the time of commissioning.
If the system includes a SI-2-NA-CP for partitioning, please provide a layout of the
room/s to be partitioned and how the areas are to be configured (see example for
clarification). Include what devices are controlling each area i.e. occupancy sensor,
photocell, TSC, etc.
If the system includes a Control Interface Module (CIM) for BMS integration, please
complete the BMS Integration Form. The desired communications
parameters/settings are on the second page of this worksheet and should be
provided by the BMS integrator.
If the system includes an Ineo or Revio keypads , please complete the Ineo/Revio
Switch Station Form to indicate the required programming for each device.
STARTUP WILL NOT BE SCHEDULED UNTIL THIS INFORMATION IS RECEIVED.
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
AIM START UP
Type:
AIM
Colorow Elementary
Notes:
ISI15-38614
Transmittal Form
Eaton’s Cooper Controls
203 Cooper Circle
Peachtree City, GA 30269
Phone: 800-553-3879
Fax: 800-954-7016
ControlTechSupport@Eaton.com
From:
(Electrical Contractor)
RE: Factory Start-Up
In accordance with Eaton’s terms and conditions this letter serves as written notification
requesting a Field Service Engineer to perform a system start up beginning on the
following date: _________________________________
Subject to Technician Availability
The control system will be completely installed by the date above. If the installation is
not complete at the specified time, I understand that additional expenses may be
incurred from Eaton for extra trips to complete system programming.
I understand that the requested date is subject to technician availability and is not
guaranteed until confirmed by Eaton. Further, I acknowledge that a date for startup
cannot be provided until all of the paperwork is submitted and complete.
Signature:
If you have any questions concerning the paperwork, startup, and/or training please call
our Technical Support Center at 800-553-3879 and select the option for Technical
Assistance. We look forward to working with you on this project.
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
AIM START UP
Colorow Elementary
Notes:
Type:
AIM
ISI15-38614
Contact Form --- Please fill out completely.
Agent Contact Information:
Agent :
Agent Contact:
Agent Phone#:
Site Information:
Job Name:
Job Address:
City/State/Zip:
Job PO Number:
Contractor Contact Information
Contact Name:
Phone Number:
E-mail Address:
Site Contact Name:
Site Contact Phone Number:
Site Contact E-mail Address:
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
AIM START UP
Colorow Elementary
Notes:
Type:
AIM
ISI15-38614
Startup and Training Reference Document
Startup and Training includes the following:
CHECK SYSTEM HARDWARE:
1. Check-out of inputs and outputs for installation and function.
2. Check-out of network communications.
CHECK SYSTEM SOFTWARE:
1. Check-out all computer software functions.
2. Review scheduling and programming parameters.
TRAINING:
1. Demonstrate hardware including: function, diagnostic indicators, connections,
troubleshooting, and replacement.
2. Instruction on all software functions including keypad or software programming,
and system monitoring.
3. Hands on training for system management including functions in #2.
Catalog Number:
CK4-277NO
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
Type:
LCP
ISI15-38614
Technical Data
Effective November 14, 2014
CK4 – ControlKeeper 4
Catalog#
Prepared by
Project
Date
Comments
Type
Overview
The ControlKeeper 4 network lighting control panel is a costeffective, specification grade lighting control system that can control
4 relays per panel. Network up to 254 ControlKeeper panels for a
state of the art lighting control system.
Features
Capable of mixed load voltages (120/277 VAC) as well as mixed
sources (i.e. normal and emergency power)
Normally open
Relays are integral to control board
Catalog Number:
CK4-277NO
Submitted by Illumination Systems, Inc
Job Name:
Type:
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
LCP
ISI15-38614
Technical Data 
CK4 – ControlKeeper 4


November 2014
Specifications
Enclosure
Size
Transformer
Ratings
Power Use
Ratings
Operating
Environment
Master Override
Programming
Standard Relay
Ratings
Standards
System Includes
UL listed – UL 916 standard
NEMA 1 surface mount
10”H x 14”W x 3.5”D
120 VAC or 277 VAC
NEMA 1 enclosure
4 relays
4 low voltage input connections
Fully loaded panel 20 watts
Digital Switch Interface
Temperature: 32°F to 122°F (0°C to 50°C)
ON/AUTO/OFF
PC Software
20A, 120/277 VAC
Normally open
Maximum wire size: 10 AWG
Mechanical operations: 10 million
UL Approval
UL 916 Listed
Time schedules with astronomic clock
Prioritization and masking of switch inputs, time schedules and
remotes
Timed inputs
Occupant warn-off and overrides
RS-232 port standard
RS-485 network standard
Accessories
Keeper Enterprise Network Software
Ethernet Interface Module
Automation Interface Module
Telephone Interface Module
Gateway/DMX Gateway
CEPC (UL 924 Accessory)
Greengate Digital Switch (GDS)
Low Voltage Switches
Contact Input Photosensor
Occupancy Sensor
Dimensions
Enclosure
ControlKeeper 2
ControlKeeper 4
9.5"H x 14"W x 3.25"D
14"
7.5"H x 11"W x 5"D
11"
10"
5"
7.5"
2
www.coopercontrol.com
10"
3.5"
Catalog Number:
CK4-277NO
Submitted by Illumination Systems, Inc
Job Name:
Type:
LCP
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
Technical Data
CK4 – ControlKeeper 4


November 2014
Reflective Ceiling Plan
Sample Circuiting
General Lighting
A/V Mode Lighting
Outboard Lamps OFF
Center Lamp Remains
Circuit/Zone 3
ON (Full Output)
Whiteboard Shuts OFF
Recessed
General Lighting
Luminaires
Sample Switch Control
General On
Off
Daylight
Switching
Zone 1
Daylight
Switching
Zone 2
Daylight
Switching
Zone 3
GDS-2TLB-W-EC1
Classroom or Office Solution with Whiteboard
and A/V Mode Switching Option
Sample One-Line
RS-485 Network
Connect up to 254 ControlKeeper lighting control panels and accessories
1. Daisy-chain all ControlKeeper lighting control panels using twisted pair
(Belden #9841) or category 5 cable.
2. Lighting control network up to 4000 feet total length.If greater length is
needed RS-485 repeaters are available.
Lighting control panel power supply:
Voltage specific transformer. Specify 120 VAC or 277 VAC
for the transformer voltage.
GDS network uses
GDS-I-KIT to access
the panel.
Typical
Occupancy Sensor
for On/Off control
Typical relay wiring:
Typical
Photocell
for On/Off control
Relay 1
Relay 2
Relay 3
Relay 4
RS-232 RS-232
ON
ON
ON
+24VDC
DC GND
ON
OFF
+24
OFF
+24
OFF
+24
+24
OFF
RS-485
Line
Load A
Line
Load B
Line
Load C
Line
Load D
Standard relay information
Qty 4 - 20 amp 120/277 VAC single pole relays
Available normally open
Individual status LED manual overrides
10 AWG maximum wire size
10 million operations
The Ethernet Interface Module (EIM) and
Wireless Ethernet Interface Module (WEIM)
may be connected to any lighting control panel
in the system using the RS-232 cable included
4 low voltage inputs
(Momentary, Maintained, Alternate Action
switches, occupancy sensors and Photocells)
Each input is software programmable to
control any relay or group of relays.
120 VAC wall transformer included
End user computers
can program any lighting control
panel via the Wireless Ethernet Interface Module (WEIM)
using the Keeper Enterprise software.
www.coopercontrol.com
3
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
CK4-277NO
Type:
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
LCP
ISI15-38614
Technical Data 
CK4 – ControlKeeper 4


November 2014
Ordering
This is a network-ready lighting control system. It can be combined
with other ControlKeeper series panels to create a scalable,
networked lighting control scheme.
CK4 - 120NO
Product
Transformer Voltage
CK4 = ControlKeeper 4
120NO = 120 VAC Normally Open
277NO = 277 VAC Normally Open
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Controls Business
203 Cooper Circle
Peachtree City, GA 30269
coopercontrol.com
© 2014 Eaton
All Rights Reserved
Printed in USA
Publication No. ACC141023
November 14, 2014
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Catalog Number:
GMDS-W
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
Type:
$LV
ISI15-38614
Technical Data
Effective October 22, 2014
GMDS – Momentary Decorator Switch
Catalog#
Prepared by
Project
Date
Comments
Type
Overview
TThe Momentary Decorator Switch is a system accessory for the
Greengate Lighting Control System. This switch is recommended
for most low voltage switching applications and fits a standard
decorator wallplate.
Features
When pressed, momentary contact establishes circuit contact
in the closed position. When not pressed, the switch is in the
(open) position.
Thermoplastic rocker, top, and backbody are virtually unbreakable
to deliver years of durable performance
Tri-combo screw heads offer greater installation flexibility
Catalog Number:
GMDS-W
Submitted by Illumination Systems, Inc
Job Name:
Type:
$LV
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
Technical Data 
GMDS – Momentary Decorator Switch


October 2014
Specifications
Switch Type
Standards
Dimensions
Momentary Contact
UL Listed
Description/Operation
The Momentary Decorator Switch is a line voltage switch used as
a low voltage contact closure device used with Greengate Lighting
Control Panels and Occupancy Sensors. When toggled, the switch
momentarily makes a contact closure to the lighting control panel or
occupancy sensor, sending an “ON” signal. When not pressed, the
switch is in the (open) position.
3.81"
(98.81mm)
3.81"
(98.81mm)
3.28"
(83.31mm)
4.19"
(106.4mm)
3.28"
(83.31mm)
Installation
This system accessory will require wall mounting and wiring at
the site.
1.44"
(38.58mm)
0.97"
(24.64mm)
3.81"
(98.81mm)
3.81"
(98.81mm)
3.28"
(83.31mm)
4.19"
(106.4mm)
3.28"
(83.31mm)
1.44"
(38.58mm)
2
www.coopercontrol.com
2.72"
(69.09mm)
Catalog Number:
GMDS-W
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
Type:
$LV
ISI15-38614
Technical Data 
GMDS – Momentary Decorator Switch


October 2014
Wiring Diagram
Ordering
*Wallplate Not Included
This is an accessory for the Greengate Lighting Control System. It
is not an integral part of the system. There is no factory assembly
needed.
Catalog #
Description
Color
GMDS-W
Momentary Decorator Switch
White
*Refer to Screwless Wallplate spec sheet for ordering information at
coopercontrol.com
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Controls Business
203 Cooper Circle
Peachtree City, GA 30269
coopercontrol.com
© 2014 Eaton
All Rights Reserved
Printed in USA
Publication No. ACC131626
October 22, 2014
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Catalog Number:
MOM-KEY
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
Type:
$K
ISI15-38614
Technical Data
Effective November 3, 2014
Key Switches and Wallplates
Catalog#
Prepared by
Project
Date
Comments
Type
Overview
Key Low Voltage Switches and Wallplates are system accessories
for the Greengate Lighting Control Systems. The switches provide
switch control of specific relay outputs or groups of relay outputs.
Features
3-Wire Momentary Switch
2-Wire Maintained Switch
Class 2 low voltage
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
MOM-KEY
Type:
$K
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
Technical Data
Key Switches and Wallplates


November 2014
Specifications
Construction
Wall Plate
Switch Rating
Switch Type
Wallplate Ordering
Stainless steel
Plastic, Stainless Steel
4A, 28V DC
Maintained or Momentary Contact
Switches are not included with wallplates and must be ordered
separately. Use this as a guide for selecting correct plate color/finish
and switch color. If color/finish specifications are not received along
with your order for plates and switches, stainless steel switches
with stainless steel wallplates will be shipped.
Description/Operation
One Gang/One Switch
Key Switches are used in conjunction with Greengate lighting control
systems to switch relay circuits ON or OFF from each lighting
location. The low voltage key switches are wired into the inputs of
the control panel and, through programming, are linked to control
one or more output relays. Our lighting control systems can accept
any low voltage dry contact switch.
Stainless Steel
Part Number: KEY116
Installation
This system accessory will require wall mounting and wiring at
the site.
Switch Ordering
This is an accessory for Greengate Lighting Control Systems. It is
not an integral part of the systems. There is no factory assembly
needed. When ordering switches always order wallplates. See next/
back page for details.
Catalog #
Description
MOM-Key
MOM-DEC-Key
MAIN-Key
KEY116
Momentary Key Switch
Decorator Momentary Key
Maintained Key Switch
1 Gang, 1 Switch Stainless Steel Wallplate
NNote: All multi-key or multi-gang wallplates are custom. See Custom
Wallplates Section on back/next page of this sheet.
Custom Wallplates
If the wallplate you are looking for is not on this sheet, it will be a
custom wallplate. Custom wallplates can have any configuration.
Please submit a detailed drawing containing the custom wallplate
configuration and any engraving information. Please contact factory
for the part number and price. For delivery allow 4 to 6 weeks from
receipt of order.
Custom Engraving (Option CE) Guidelines
Low voltage wallplate supports a maximum of 2 lines, 10 characters
per line. Please contact factory for the part number and pricing.
Please include a drawing showing wallplate configuration and
engraving information. Allow 4-6 weeks for delivery once the
drawings have been approved.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Controls Business
203 Cooper Circle
Peachtree City, GA 30269
coopercontrol.com
© 2014 Eaton
All Rights Reserved
Printed in USA
Publication No. ACC140979
November 3, 2014
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Catalog Number:
KEY116
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
Type:
$K
ISI15-38614
Technical Data
Effective November 3, 2014
Key Switches and Wallplates
Catalog#
Prepared by
Project
Date
Comments
Type
Overview
Key Low Voltage Switches and Wallplates are system accessories
for the Greengate Lighting Control Systems. The switches provide
switch control of specific relay outputs or groups of relay outputs.
Features
3-Wire Momentary Switch
2-Wire Maintained Switch
Class 2 low voltage
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
KEY116
Type:
$K
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
Technical Data
Key Switches and Wallplates


November 2014
Specifications
Construction
Wall Plate
Switch Rating
Switch Type
Wallplate Ordering
Stainless steel
Plastic, Stainless Steel
4A, 28V DC
Maintained or Momentary Contact
Switches are not included with wallplates and must be ordered
separately. Use this as a guide for selecting correct plate color/finish
and switch color. If color/finish specifications are not received along
with your order for plates and switches, stainless steel switches
with stainless steel wallplates will be shipped.
Description/Operation
One Gang/One Switch
Key Switches are used in conjunction with Greengate lighting control
systems to switch relay circuits ON or OFF from each lighting
location. The low voltage key switches are wired into the inputs of
the control panel and, through programming, are linked to control
one or more output relays. Our lighting control systems can accept
any low voltage dry contact switch.
Stainless Steel
Part Number: KEY116
Installation
This system accessory will require wall mounting and wiring at
the site.
Switch Ordering
This is an accessory for Greengate Lighting Control Systems. It is
not an integral part of the systems. There is no factory assembly
needed. When ordering switches always order wallplates. See next/
back page for details.
Catalog #
Description
MOM-Key
MOM-DEC-Key
MAIN-Key
KEY116
Momentary Key Switch
Decorator Momentary Key
Maintained Key Switch
1 Gang, 1 Switch Stainless Steel Wallplate
NNote: All multi-key or multi-gang wallplates are custom. See Custom
Wallplates Section on back/next page of this sheet.
Custom Wallplates
If the wallplate you are looking for is not on this sheet, it will be a
custom wallplate. Custom wallplates can have any configuration.
Please submit a detailed drawing containing the custom wallplate
configuration and any engraving information. Please contact factory
for the part number and price. For delivery allow 4 to 6 weeks from
receipt of order.
Custom Engraving (Option CE) Guidelines
Low voltage wallplate supports a maximum of 2 lines, 10 characters
per line. Please contact factory for the part number and pricing.
Please include a drawing showing wallplate configuration and
engraving information. Allow 4-6 weeks for delivery once the
drawings have been approved.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Controls Business
203 Cooper Circle
Peachtree City, GA 30269
coopercontrol.com
© 2014 Eaton
All Rights Reserved
Printed in USA
Publication No. ACC140979
November 3, 2014
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Catalog Number:
OAC-DT-1000-R
Submitted by Illumination Systems, Inc
Job Name:
Type:
VS
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
Technical Data
Effective November 5, 2014
OAC-DT – MicroSet Dual Tech Low
Voltage Ceiling Sensor
Catalog#
Prepared by
Project
Date
Comments
Type
Overview
The Dual Technology sensor’s combination of Ultrasonic and Passive
Infrared technologies offers the most complete sensing equipment
available today. MicroSet self-adjusting Dual Technology sensors
drastically simplify and reduce a contractor’s installation and
adjustment time period.
Features
MicroSet self-adjusting Time Delay and sensitivity
Optional built-in light level sensor
Optional BAS/HVAC isolated relay
Products tested to NEMA WD 7 - 2011 Occupancy
Motion Sensors Standard
Selectable Walk-Through Mode
Dual Relay control
PIR
Activated
Ultrasonic
Activated
MicroSet
Self-Adjusting
Catalog Number:
OAC-DT-1000-R
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
Type:
VS
ISI15-38614
Technical Data
November 2014
OAC-DT – MicroSet Dual Tech Low Voltage Ceiling Sensor


Specifications
Technology
Power
Requirements
Time Delays
Coverage
Light Level
Sensing
(-R Models)
Operating
Environment
Housing
Size
Mounting
LED Indicators
Standards
2
Passive Infrared (PIR) and Ultrasonic (US)
Input
10-30 VDC from Greengate Switchpack or
Greengate system
Maximum current needed is 25mA per sensor
Output
Open collector output to switch up to ten
Greengate Switchpacks
BAS with Isolated Form C Relay in (-R) model
Isolated Form C Relay Ratings: 1A 30 VDC/VAC
Self-adjustable, 15 seconds/test (10 minutes Auto),
or Selectable 5, 15, 30 minutes, or Zero Time Delay
500, 1000, and 2000 sq. ft.
0 to 300 foot-candles
Temperature: 32°F - 104°F (0°C - 40°C)
Relative humidity: 20% to 90%, non-condensing
For indoor use only
Durable, injection molded housing. Polycarbonate
resin complies with UL 94V-0
1.42”H x 4.5”W (36.068mm x 114.3mm)
Mounts directly to ceiling tile, to a 4” square box
and round mud ring or to 4” octagon box
Red LED for PIR detection; Green LED for
Ultrasonic detection
FCC Compliant
cULus Listed
RoHS Compliant
www.coopercontrol.com
Description/Operation
The MicroSet self-adjusting technology continuously monitors
multiple sub-frequencies in the event that if a continuous Doppler
shift occurs, such as those created by airflow from an air duct, the
sensor will identify the noise as continuous and then block it out of
view at a select sub-frequency. It will continue to monitor other subfrequencies for human motion. This avoids false-activation, while still
maintaining the high level of sensitivity that is necessary for sensing
minor motion in a changing environment. Separate concurrent time
delays for both Passive Infrared and Ultrasonic technologies avoid
false activations or deactivations. In Automatic On Mode, the lights
turn ON when a person enters the room. In Manual On Mode (-R
model only), the lights are turned ON by activating a momentary
switch (model # GMDS-*) that is connected to the sensor. When
enabled, the daylighting feature (-R models only) prevents lights from
turning ON when the room is adequately illuminated by natural light.
Applications
Classrooms
Conference Rooms
Office Spaces
Common Areas
Computer Rooms
Break Rooms
Hallways
Other Indoor Office Spaces
Catalog Number:
OAC-DT-1000-R
Submitted by Illumination Systems, Inc
Job Name:
Type:
VS
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
Technical Data
OAC-DT – MicroSet Dual Tech Low Voltage Ceiling Sensor


November 2014
Wiring Diagrams
HOT
OAC-DT-2000-R Model
LINE
RED (15 VDC )
OAC AND VAC MANUAL MODE OPERATION:
BLUE
RED (10-30 VDC)
HOT
BLUE (CONTROL-OCC)
LINE
PURPLE (NORMALLY CLOSED)
YELLOW (CONTROL-OCC/DAY)
**USE BLACK LEAD FOR 120 VAC.
USE ORANGE LEAD FOR 277 VAC.
CAP UNUSED LEAD.
GRAY (ISOLATED RELAY COMMON)
BROWN (BLUE CONTROL)
ORANGE (NORMALLY OPEN)
WHITE/BROWN (YELLOW CONTROL)
2. SWITCHES CAN BE USED TO TURN
LOADS ON OR OFF.
RED (15 VDC)
SWITCHPACK
BLUE (CONTROL)
3. IF DAYLIGHT SENSOR IS ENABLED AND
LIGHT LEVEL IS ABOVE SETPOINT,
SWITCHPACK CONNECTED TO YELLOW
LEAD WILL NOT TURN LOAD ON.
WHITE
NEUTRAL
BLACK (COMMON)
BLUE
1. WHEN SENSOR ACTIVATES, BOTH
LOADS TURN ON.
BLUE
**HOT
OAC AUTOMATIC MODE OPERATION:
LOAD "A"
BLACK (COMMON)
2. LOADS TURN OFF WHEN SENSOR
TIMES OUT OR WITH SWITCHES.
3. IF DAYLIGHT SENSOR IS ENABLED AND
LIGHT LEVEL IS ABOVE SETPOINT,
SWITCHPACK CONNECTED TO YELLOW
LEAD WILL NOT TURN LOAD ON.
SWITCHPACK
BLUE (CONTROL)
1. SWITCHES ARE REQUIRED TO TURN
CORRESPONDING LOADS ON.
**HOT
**USE BLACK LEAD FOR 120 VAC.
USE ORANGE LEAD FOR 277 VAC.
CAP UNUSED LEAD.
WHITE
NEUTRAL
LOAD "B"
BLUE
BLACK (COMMON)
RECOMMENDED WIRE:
18-3 AWG STRANDED WIRE SHIELDED OR
NON/SHIELDED
MODEL GMDS - LOAD "B"
(NORMALLY OPEN
MOMENTARY SWITCH)
NOTES
1. LOADS MAY BE ON SAME
CIRCUIT OR DIFFERENT
CIRCUITS OR VOLTAGES.
2. SP20-MV SWITCHPACK SHOWN.
120/277 VAC 20 AMP RATING.
*Wiring diagram for single sensor application.
Visit our website for other wiring diagrams.
MODEL GMDS - LOAD "A"
(NORMALLY OPEN
MOMENTARY SWITCH)
Coverage
OAC-DT-0501-R
OAC-DT-1000-R
OAC-DT-2000-R
500 sq. ft.
1,000 sq. ft.
2,000 sq. ft.
20 ft
(6.096m)
20 ft
(6.096m)
12 ft
(3.65 m)
9 ft
(2.74 m)
12 ft
(3.65 m)
9 ft
(2.74 m)
0
0
9 ft
(2.74 m)
12 ft
(3.65 m)
9 ft
(2.74 m)
12 ft
(3.65 m)
20 ft
(6.096m)
20 ft
(6.096m)
8.5 ft
(2.59 m)
3 ft
(0.91)
0
8.5 ft
(2.59 m)
0
15 ft
23 ft
5 ft
10 ft
(1.52 m)(3.05 m)(4.57 m) (7.01 m)
20 ft
(6.096m)
16 ft
(4.87 m)
12 ft
(3.65 m)
0
DT1k
12 ft
(3.65 m)
16 ft
(4.87 m)
20 ft
(6.096m)
8.5 ft
(2.59 m)
3 ft
(0.91)
0
0
15 ft 10 ft 5 ft
5 ft 10 ft 15 ft 17 ft
23 ft
23 ft
17 ft
(1.5 m)(3 m)(4.57 m)(5.18 m)(7.01 m)
(7.01 m)(5.18 m)(4.57 m)(3 m)(1.5 m)
Minor Motion, IR
Recommended Mounting Height: 8 to 12 ft
Major Motion, IR
32 ft
32 ft
0
23 ft
5 ft 10 ft 15 ft
15 ft 10 ft
23 ft
5 ft
(9.75 m) (7.01 m) (4.57 m) (3 m) (1.52 m)
(1.52 m) (3 m) (4.57 m) (7.01 m) (9.75 m)
Maximum coverage area may
vary somewhat according to room
shape and the presence of obstacles.
Minor Motion, Ultrasonic
Major Motion, Ultrasonic
www.coopercontrol.com
3
Catalog Number:
OAC-DT-1000-R
Submitted by Illumination Systems, Inc
Job Name:
Type:
VS
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
Technical Data
OAC-DT – MicroSet Dual Tech Low Voltage Ceiling Sensor


Controls
LEDs
(-R model only)
Override
(-R model only)
Sweep
Full/Half Logic
(-R model only)
Daylight Sensor Adjustment
Ultrasonic Sensitivity Adjustment
PIR Detector
ON
1 2 3 4 5 6
7 8 9 10 11 12
Ordering
Catalog #
Maximum
Room Size
Field of View
Freqency
Features
OAC-DT-2000-R
OAC-DT-2000
OAC-DT-1000-R
OAC-DT-1000
OAC-DT-0501-R
OAC-DT-0501
2,000 sq. ft.
2,000 sq. ft.
1,000 sq. ft.
1,000 sq. ft.
500 sq. ft.
500 sq. ft.
Two Way (360°)
Two Way (360°)
Two Way (360°)
Two Way (360°)
One Way (180°)
One Way (180°)
32
32
32
32
40
40
w/ BAS Relay & Daylight Sensor
kHz
kHz
kHz
kHz
kHz
kHz
w/ BAS Relay & Daylight Sensor
w/ BAS Relay & Daylight Sensor
n
nly)
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Controls Business
203 Cooper Circle
Peachtree City, GA 30269
coopercontrol.com
© 2014 Eaton
All Rights Reserved
Printed in USA
Publication No. ACC141005
November 5, 2014
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
HVAC/Tracking
(-R model only)
Zero Time Delay
Catalog Number:
OAC-DT-2000-R
Submitted by Illumination Systems, Inc
Job Name:
Type:
VS1
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
Technical Data
Effective November 5, 2014
OAC-DT – MicroSet Dual Tech Low
Voltage Ceiling Sensor
Catalog#
Prepared by
Project
Date
Comments
Type
Overview
The Dual Technology sensor’s combination of Ultrasonic and Passive
Infrared technologies offers the most complete sensing equipment
available today. MicroSet self-adjusting Dual Technology sensors
drastically simplify and reduce a contractor’s installation and
adjustment time period.
Features
MicroSet self-adjusting Time Delay and sensitivity
Optional built-in light level sensor
Optional BAS/HVAC isolated relay
Products tested to NEMA WD 7 - 2011 Occupancy
Motion Sensors Standard
Selectable Walk-Through Mode
Dual Relay control
PIR
Activated
Ultrasonic
Activated
MicroSet
Self-Adjusting
Catalog Number:
OAC-DT-2000-R
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
Type:
VS1
ISI15-38614
Technical Data
November 2014
OAC-DT – MicroSet Dual Tech Low Voltage Ceiling Sensor


Specifications
Technology
Power
Requirements
Time Delays
Coverage
Light Level
Sensing
(-R Models)
Operating
Environment
Housing
Size
Mounting
LED Indicators
Standards
2
Passive Infrared (PIR) and Ultrasonic (US)
Input
10-30 VDC from Greengate Switchpack or
Greengate system
Maximum current needed is 25mA per sensor
Output
Open collector output to switch up to ten
Greengate Switchpacks
BAS with Isolated Form C Relay in (-R) model
Isolated Form C Relay Ratings: 1A 30 VDC/VAC
Self-adjustable, 15 seconds/test (10 minutes Auto),
or Selectable 5, 15, 30 minutes, or Zero Time Delay
500, 1000, and 2000 sq. ft.
0 to 300 foot-candles
Temperature: 32°F - 104°F (0°C - 40°C)
Relative humidity: 20% to 90%, non-condensing
For indoor use only
Durable, injection molded housing. Polycarbonate
resin complies with UL 94V-0
1.42”H x 4.5”W (36.068mm x 114.3mm)
Mounts directly to ceiling tile, to a 4” square box
and round mud ring or to 4” octagon box
Red LED for PIR detection; Green LED for
Ultrasonic detection
FCC Compliant
cULus Listed
RoHS Compliant
www.coopercontrol.com
Description/Operation
The MicroSet self-adjusting technology continuously monitors
multiple sub-frequencies in the event that if a continuous Doppler
shift occurs, such as those created by airflow from an air duct, the
sensor will identify the noise as continuous and then block it out of
view at a select sub-frequency. It will continue to monitor other subfrequencies for human motion. This avoids false-activation, while still
maintaining the high level of sensitivity that is necessary for sensing
minor motion in a changing environment. Separate concurrent time
delays for both Passive Infrared and Ultrasonic technologies avoid
false activations or deactivations. In Automatic On Mode, the lights
turn ON when a person enters the room. In Manual On Mode (-R
model only), the lights are turned ON by activating a momentary
switch (model # GMDS-*) that is connected to the sensor. When
enabled, the daylighting feature (-R models only) prevents lights from
turning ON when the room is adequately illuminated by natural light.
Applications
Classrooms
Conference Rooms
Office Spaces
Common Areas
Computer Rooms
Break Rooms
Hallways
Other Indoor Office Spaces
Catalog Number:
OAC-DT-2000-R
Submitted by Illumination Systems, Inc
Job Name:
Type:
VS1
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
Technical Data
OAC-DT – MicroSet Dual Tech Low Voltage Ceiling Sensor


November 2014
Wiring Diagrams
HOT
OAC-DT-2000-R Model
LINE
RED (15 VDC )
OAC AND VAC MANUAL MODE OPERATION:
BLUE
RED (10-30 VDC)
HOT
BLUE (CONTROL-OCC)
LINE
PURPLE (NORMALLY CLOSED)
YELLOW (CONTROL-OCC/DAY)
**USE BLACK LEAD FOR 120 VAC.
USE ORANGE LEAD FOR 277 VAC.
CAP UNUSED LEAD.
GRAY (ISOLATED RELAY COMMON)
BROWN (BLUE CONTROL)
ORANGE (NORMALLY OPEN)
WHITE/BROWN (YELLOW CONTROL)
2. SWITCHES CAN BE USED TO TURN
LOADS ON OR OFF.
RED (15 VDC)
SWITCHPACK
BLUE (CONTROL)
3. IF DAYLIGHT SENSOR IS ENABLED AND
LIGHT LEVEL IS ABOVE SETPOINT,
SWITCHPACK CONNECTED TO YELLOW
LEAD WILL NOT TURN LOAD ON.
WHITE
NEUTRAL
BLACK (COMMON)
BLUE
1. WHEN SENSOR ACTIVATES, BOTH
LOADS TURN ON.
BLUE
**HOT
OAC AUTOMATIC MODE OPERATION:
LOAD "A"
BLACK (COMMON)
2. LOADS TURN OFF WHEN SENSOR
TIMES OUT OR WITH SWITCHES.
3. IF DAYLIGHT SENSOR IS ENABLED AND
LIGHT LEVEL IS ABOVE SETPOINT,
SWITCHPACK CONNECTED TO YELLOW
LEAD WILL NOT TURN LOAD ON.
SWITCHPACK
BLUE (CONTROL)
1. SWITCHES ARE REQUIRED TO TURN
CORRESPONDING LOADS ON.
**HOT
**USE BLACK LEAD FOR 120 VAC.
USE ORANGE LEAD FOR 277 VAC.
CAP UNUSED LEAD.
WHITE
NEUTRAL
LOAD "B"
BLUE
BLACK (COMMON)
RECOMMENDED WIRE:
18-3 AWG STRANDED WIRE SHIELDED OR
NON/SHIELDED
MODEL GMDS - LOAD "B"
(NORMALLY OPEN
MOMENTARY SWITCH)
NOTES
1. LOADS MAY BE ON SAME
CIRCUIT OR DIFFERENT
CIRCUITS OR VOLTAGES.
2. SP20-MV SWITCHPACK SHOWN.
120/277 VAC 20 AMP RATING.
*Wiring diagram for single sensor application.
Visit our website for other wiring diagrams.
MODEL GMDS - LOAD "A"
(NORMALLY OPEN
MOMENTARY SWITCH)
Coverage
OAC-DT-0501-R
OAC-DT-1000-R
OAC-DT-2000-R
500 sq. ft.
1,000 sq. ft.
2,000 sq. ft.
20 ft
(6.096m)
20 ft
(6.096m)
12 ft
(3.65 m)
9 ft
(2.74 m)
12 ft
(3.65 m)
9 ft
(2.74 m)
0
0
9 ft
(2.74 m)
12 ft
(3.65 m)
9 ft
(2.74 m)
12 ft
(3.65 m)
20 ft
(6.096m)
20 ft
(6.096m)
8.5 ft
(2.59 m)
3 ft
(0.91)
0
8.5 ft
(2.59 m)
0
15 ft
23 ft
5 ft
10 ft
(1.52 m)(3.05 m)(4.57 m) (7.01 m)
20 ft
(6.096m)
16 ft
(4.87 m)
12 ft
(3.65 m)
0
DT1k
12 ft
(3.65 m)
16 ft
(4.87 m)
20 ft
(6.096m)
8.5 ft
(2.59 m)
3 ft
(0.91)
0
0
15 ft 10 ft 5 ft
5 ft 10 ft 15 ft 17 ft
23 ft
23 ft
17 ft
(1.5 m)(3 m)(4.57 m)(5.18 m)(7.01 m)
(7.01 m)(5.18 m)(4.57 m)(3 m)(1.5 m)
Minor Motion, IR
Recommended Mounting Height: 8 to 12 ft
Major Motion, IR
32 ft
32 ft
0
23 ft
5 ft 10 ft 15 ft
15 ft 10 ft
23 ft
5 ft
(9.75 m) (7.01 m) (4.57 m) (3 m) (1.52 m)
(1.52 m) (3 m) (4.57 m) (7.01 m) (9.75 m)
Maximum coverage area may
vary somewhat according to room
shape and the presence of obstacles.
Minor Motion, Ultrasonic
Major Motion, Ultrasonic
www.coopercontrol.com
3
Catalog Number:
OAC-DT-2000-R
Submitted by Illumination Systems, Inc
Job Name:
Type:
VS1
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
Technical Data
OAC-DT – MicroSet Dual Tech Low Voltage Ceiling Sensor


Controls
LEDs
(-R model only)
Override
(-R model only)
Sweep
Full/Half Logic
(-R model only)
Daylight Sensor Adjustment
Ultrasonic Sensitivity Adjustment
PIR Detector
ON
1 2 3 4 5 6
7 8 9 10 11 12
Ordering
Catalog #
Maximum
Room Size
Field of View
Freqency
Features
OAC-DT-2000-R
OAC-DT-2000
OAC-DT-1000-R
OAC-DT-1000
OAC-DT-0501-R
OAC-DT-0501
2,000 sq. ft.
2,000 sq. ft.
1,000 sq. ft.
1,000 sq. ft.
500 sq. ft.
500 sq. ft.
Two Way (360°)
Two Way (360°)
Two Way (360°)
Two Way (360°)
One Way (180°)
One Way (180°)
32
32
32
32
40
40
w/ BAS Relay & Daylight Sensor
kHz
kHz
kHz
kHz
kHz
kHz
w/ BAS Relay & Daylight Sensor
w/ BAS Relay & Daylight Sensor
n
nly)
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Controls Business
203 Cooper Circle
Peachtree City, GA 30269
coopercontrol.com
© 2014 Eaton
All Rights Reserved
Printed in USA
Publication No. ACC141005
November 5, 2014
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
HVAC/Tracking
(-R model only)
Zero Time Delay
Catalog Number:
ONW-D-1001-MV-W
Submitted by Illumination Systems, Inc
Job Name:
Type:
$VS
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
Technical Data
Effective November 4, 2014
ONW-D – NeoSwitch Dual Tech/Single Level
Wall Switch Sensor (Ground Required)
Catalog#
Prepared by
Project
Date
Comments
Type
Overview
The Dual Technology Single Level Occupancy Sensing Wall Switch
is a motion sensing lighting control and conventional wall switch allin-one that is used to for energy savings and convenience. It does
not require a neutral wire for installation making it ideal for retrofit
applications.
Features
Air-gap switch ensures no leakage current to load
Selectable built-in light level sensor
NEMA WD7 Guide robotic method utilized to verify coverage
patterns
PIR
Activated
Ultrasonic
Activated
Self-Adjusting
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
ONW-D-1001-MV-W
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
Type:
$VS
ISI15-38614
Technical Data 
November 2014
ONW-D – NeoSwitch Dual Tech/Single Level Wall Switch Sensor (Ground Required)


Specifications
Technology
Electrical
Ratings
Ballast
Compatibility
Time Delays
Coverage
Light Level
Sensing
Operating
Environment
Housing
Size
LED Indicators
Standards
2
Passive Infrared (PIR) and Ultrasonic (US)
120 VAC:
Incandescent/Tungsten –
Max. load: 6.7 amps, 800W, 50/60 Hz
Fluorescent/Ballast –
Max. load:10 amps, 1200W, 50/60 Hz
Motor Load: ¼ HP @ 125 VAC
277 VAC:
Fluorescent/Ballast –
Max. load: 9.8 amps, 2700W, 50/60 Hz
347 VAC:
Fluorescent/Ballast –
Max. load: 4.3 amps, 1500W, 50/60 Hz
Compatible with magnetic and electronic ballasts
Self-Adjusting, 15 seconds/test (10 min. Auto),
Selectable 5, 15, 30 minutes
Major motion - 36’ x 30’
Minor motion - 20’ x 16’
0 to 200 foot-candles
Temperature: 32°F - 104°F (0°C - 40°C)
Relative humidity: 20% to 90% non-condensing
For indoor use only
Durable, injection molded housing. ABS resin
complies with UL 94V-0
Mounting Plate/Strap Dimensions:
4.195”H x 1.732”W (106.55mm x 44mm)
Mounting Plate/Strap Dimensions:
ONW-D-1001-347:
4.35”H x 1.732”W (110.49mm x 44mm)
Product Housing Dimensions:
2.618”H x 1.752”W x 1.9”D (66.5mm x 44.5mm
x 48.26mm)
Red LED for PIR detection; Green
LED for Ultrasonic detection
FCC Compliant
cULus Listed
RoHS Compliant
www.coopercontrol.com
Operation
The ONW-D-1001-MV combines Ultrasonic (US) and Passive Infrared
(PIR) sensor technologies to monitor a room for occupancy to
deliver maximum energy savings and ensure the greatest sensitivity
and coverage for tough applications without the threat of false
triggers. PIR is used to turn the lights ON and then either or both
technologies are used to keep the lights ON. In Automatic On
Mode, the lights turn ON automatically when a person enters the
room. In Manual On Mode, the lights are turned ON by pressing the
universally recognized light icon pushbutton. The sensor includes
self-adaptive technology that continuously self-adjusts sensitivity and
time delay in real-time, maximizing the potential energy savings that
are available in the particular application.
Applications
Private Offices
Small Conference Rooms
Lunch/Break Rooms
Small Classrooms
Small Restrooms (1-2 Stalls)
Small Lounges
Small Waiting Rooms
Small Closets
Small Storage Areas
Catalog Number:
ONW-D-1001-MV-W
Submitted by Illumination Systems, Inc
Job Name:
Type:
$VS
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
ONW-D – NeoSwitch Dual Tech/Single Level Wall Switch Sensor (Ground Required)


Technical Data
November 2014
Wiring Diagrams
Single Level Switching – Single Circuit
BLUE
BLACK
120/277 VAC
GREEN
LOAD
GROUND
NEUTRAL
Three-way wiring diagram: Lights will turn OFF automatically when sensor that detected motion last, times out.
TRAVELLER
WIRES
120/277 VAC
BLUE
BLUE
BLACK
GREEN
BLACK
GREEN
LOAD 1
GROUND
GROUND
NEUTRAL
THREE-WAY WIRING DIAGRAM:
LIGHTS WILL TURN OFF, WHEN UNIT THAT WAS TURNED ON LAST AND/OR DETECTED MOTION LAST TIMES-OUT.
*For 347 VAC wiring diagrams refer to Installation Instructions
Coverage
36
,
,
20
Minor Motion, IR
Major Motion, IR
,
8
Minor Motion, Ultrasonic
Major Motion, Ultrasonic
,
10
,
8
Maximum coverage area may
vary somewhat according to room
shape and the presence of obstacles.
15
,
20
,
www.coopercontrol.com
3
Catalog Number:
ONW-D-1001-MV-W
Submitted by Illumination Systems, Inc
Job Name:
Type:
$VS
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
Technical Data 
November 2014
ONW-D – NeoSwitch Dual Tech/Single Level Wall Switch Sensor (Ground Required)


Controls
DIP Switch Legend
Time Delay
Red (PIR) & Green (US)
Detection LEDs
PIR Lens
Ultrasonic Detection
Daylight
Sensor Level
Adjustment
Ultrasonic
Sensitivity
Adjustment
Activation
Relay 1
PIR Sensitivity Walk-Through Mode
ON/OFF Button
Override
Maintain Lights On
1
2
15 Sec Test/Auto*
Auto
Full
Disable
Enable
Disable
Either
5 Minutes
Manual
50%
Enable
Disable
Enable
Both
15 Minutes
30 Minutes
*Self-Adjusts to
10 min. user
mode
3
4
6
5
7
8
Default =
DIP Switches
1
2
3
4
5
6
7
ON/OFF Button
Ordering
*One single gang wallplate included. Wallplate not included with
347 VAC Model
Catalog #
Ratings
Coverage
Voltage
ONW-D-1001-MV-*
(* - W, V, LA, G, B)
Incandescent: 0-800W @ 120V
Fluorescent: 0-1200W @ 120V
Fluorescent: 0-2700W @ 277V
Max Load/Relay
Incandescent: 0-1500W @ 347V
Fluorescent: 0-1500W @ 347V
Max Load/Relay
180°; 1000 sq. ft.
120/277 VAC,
50/60 Hz
180°; 1000 sq. ft.
347 VAC,
50/60 Hz
ONW-D-1001-347-*
(* - W, V, LA, G, B)
Not Used
* White, Ivory, Light Almond, Gray, Black
NNote: Not all colors are available in stock and some color options may have
extended lead times.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Controls Business
203 Cooper Circle
Peachtree City, GA 30269
coopercontrol.com
© 2014 Eaton
All Rights Reserved
Printed in USA
Publication No. ACC140992
November 4, 2014
Not Used
Not Used
DIP Switch
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
8
9
10 11 12
9
10
11
12
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
OSP20-RDH
Type:
PP
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
PRODUCT BULLETIN
Leviton’s OSP20-RDH/RNH
Super Duty Power Pack
DEFINITION
The OSP20-RDH/RNH is the latest in the Leviton
power pack family, providing a wide array of
switching solutions into a single unit. Exclusive
Leviton High Inrush Stability (H.I.S.™) circuitry is
specifically designed to handle today’s high inrush
electronic ballast loads and offer unmatched
durability and service.
APPLICATIONS
Use a Leviton Power Pack with Leviton
Occupancy Sensors in the following applications:
• Bi-level lighting applications
• Classrooms
• Conference Rooms
• Offices
• Load Shed/Interface Hold OFF Applications
• Retail Hold ON/Bypass Applications
• Anywhere optimal lighting and energy savings
are desired
FEATURES
• Extreme durability: exceeds WS-896 Federal
Specification duty cycle requirements for specification grade toggle switches.
•Exclusive H.I.S. (High Inrush Stability) circuit designed
to handle high inrush electronic ballast loads, including the latest T5HO and T4 ballasts.
• Zero crossing design for reliability and extended life.
•Mechanical latching relay for dependability and
robust for all load types
•Return-to-on design provides fail safe operation in
the event of power loss or malfunction.
•Transformer Relay Function: OSP20-RDH/RNH
replaces traditional transformer relays and provides
occupancy sensors control. Ideal for use where
code requirements/jurisdictions prohibit the use of
277V switch legs.
•Manual-ON or Automatic-ON functionality for use in
bi-level lighting control per CEC Title 24 requirements.
•UL 2043 Plenum Rated
•Endurance tested to over 1,000,000 cycles at full
load.
•Integrates with low voltage momentary and maintained switches to control occupancy sensors.
•Conduit adaptor included for low voltage connections.
• Patent pending
Leviton Mfg. Co., Inc. Lighting Management Systems
20497 SW Teton Avenue, Tualatin, OR 97062 1-800-736-6682 Tech Line: 1-800-959-6004 Fax: 503-404-5594 www.leviton.com/lms
© 2010 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSP20-RDH • OSP20-RNH
Combines transformer relay functions, occupancy
sensor control, and manual/automatic operation
into a single high performance unit
Catalog Number:
OSP20-RDH
Submitted by Illumination Systems, Inc
Job Name:
Type:
PP
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
PRODUCT BULLETIN
TRANSFORMER RELAY APPLICATION DIAGRAM
BALLAST
277VAC
OSP20-RDH
LUMINAIRE
277VAC
OCCUPANCY SENSOR (OPTIONAL)
OSP20-RDH • OSP20-RNH
LOW VOLTAGE
LOW VOLTAGE SWITCH
BALLASTS
277VAC
OSP20-RDH
277VAC
LUMINAIRE
OSP20-RDH
OCCUPANCY SENSOR (OPTIONAL)
LOW VOLTAGE
LOW VOLTAGE SWITCH
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
OSP20-RDH
Type:
PP
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
BI-LEVEL SWITCHING DIAGRAM
Zone 1 – Auto ON
H
Yellow
Orange
Orange/Yellow
Black
Blue
White
White/Blue
Blue
Green
Blue
Brown/White
Local SW 1
Occupancy
Sensor
Auto ON
Brown
Red
Black
+24VDC
Com
LOAD 1
LOAD 2
Zone 2 – Manual ON
Yellow
Orange
Orange/Yellow
Black
Blue
White
White/Blue
Blue
Green
Blue
Brown/White
Local SW 2
Manual ON
Momentary or
Maintained Switches
Brown
Red
Black
Com
Leviton Mfg. Co., Inc. Lighting Management Systems
20497 SW Teton Avenue, Tualatin, OR 97062 1-800-736-6682 Tech Line: 1-800-959-6004 Fax: 503-404-5594 www.leviton.com/lms
© 2010 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
OSP20-RDH • OSP20-RNH
N
Catalog Number:
OSP20-RDH
Submitted by Illumination Systems, Inc
Job Name:
Type:
PP
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
PRODUCT BULLETIN
ORDERING INFORMATION
DESCRIPTION
CAT. NO.
POWER INPUT
RELAY RATING
CONTROL
INPUT
POWER SUPPLY
OUTPUT
Power Pack
OSP20-0D0
(OSP20-ND0
NAFTA)
120-230-277VAC,
50/60 Hz
20A fluorescent/incandescent @
120V, 20A fluorescent @ 230-277V;
1HP @ 120V, 2HP @ 240V
5mA, 24VDC
150mA, 24VDC
Power Pack with
Dry Contact
OSP20-RD0
(OSP20-NH0
NAFTA)
120-230-277VAC,
50/60 Hz
20A fluorescent/incandescent @
120V, 20A fluorescent @ 277V; 1HP
@ 120V, 2HP @ 240V; HVAC: 0.5A @
120VAC, 1A @ 30VDC
5mA, 24VDC
150mA, 24VDC
Power Pack with
Dry Contact
OSP15-R30
347VAC, 60 Hz
15A fluorescent @ 347V; 1HP @ 120V,
2HP @ 240V; HVAC: 0.5A @ 120VAC,
1A @ 30VDC
5mA, 24VDC
120mA, 24VDC
Add-A-Relay Unit
with Dry Contact
OSA20-R00
(OSA20-RN0
NAFTA)
—
15A incandescent @ 120V, 20A fluorescent @ 120V, 20A fluorescent @
277V, 15A fluorescent @ 347V; HVAC:
0.5A @ 120VAC, 1A @ 30VDC
5mA, 24VDC
—
Power Pack with
Dry Contact Relay
and Override Inputs
for Occupancy
Sensors
OSP20-RDH
(OSP20-RNH
NAFTA)
120-230-277VAC,
50/60Hz
20A fluorescent/incandescent @ 120V;
20A fluorescent@ 277V; 1HP @ 120V,
2HP @ 240V; HVAC; .05A @ 120VAC,
1A @ 20VDC and 15A fluorescent @
347V; 1HP @ 120V; 2HP @ 240; HVAC:
0.5A @ 120V, 1A @ 30VDC
5mA, 24VDC
225mA, 24VDC
Made in US models available
POWER PACK CAPACITY FORMULA
OSP20-RDH • OSP20-RNH
Leviton power packs can be used to provide power to one or more occupancy sensors. Since current consumptions of
occupancy sensors may vary, the best way to ensure you order the correct number of power packs and add-a-relays is by
using this formula:
# of sensor
Model As
X
+
Sensor A current
consumption
# of sensor
Model Bs
X
+
Sensor B current
consumption
# of Add a
Relays
X
50mA
< Power supply output per above chart
DESCRIPTION
CURRENT CONSUMPTION
OSC04-I, OSC15-I
10mA
OSWHB-I, OSWLR-I, OSWWV-I
15mA
OSW12-M25mA
OSC20-M, OSC20-U 30mA
OSC05-U, OSC05-M
32mA
OSC10-U, OSC10-M
40mA
OSA20-R Add-a-Relay
50mA
Leviton Manufacturing Co., Inc. Lighting Management Systems
20497 SW Teton Avenue, Tualatin, OR 97062
Telephone: 1-800-736-6682 • FAX: 503-404-5594 • Tech Line (6:00AM-4:00PM P.S.T. Monday-Friday): 1-800-959-6004
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S. de R.L. de C.V.
Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. (+52) 55-5082-1040 • FAX: (+52) 5386-1797 • www.leviton.com.mx
Visit our Website at: www.leviton.com/lms
© 2010 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
B-1361B/k10-cb
Catalog Number:
SP20-MV
Submitted by Illumination Systems, Inc
Job Name:
Type:
PP1
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
Technical Data
Effective November 5, 2014
SP15 & SP20 – Heavy Duty
Switchpacks
Catalog#
Prepared by
Project
Date
Comments
Type
Can be easily mounted
on or in a 4"sq. junction
box, via ½” in nipple
Overview
Switchpacks provide 15 VDC operating voltage to all low voltage,
15 VDC occupancy sensors and daylighting controllers. A single
switchpack can provide power for up to five sensors. Up to ten
switchpacks can be connected to one sensor for control of multiple
circuits. Isolated contacts may also be used to control HVAC,
contactors, motors, etc.
Features
Replaces separate transformers and relays
Zero-crossing circuit provides increased durability, especially with
today’s high inrush loads
Capable of switching up to 20 Amps
Suitable for Plenum use
Rated for Ballast, Tungsten and Motor Loads
Available for 120, 220, 240, 277
& 347 VAC operation
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
SP20-MV
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
Type:
PP1
ISI15-38614
Technical Data
November 2014
Specifications
Power
Requirements
Control
Ballast
Compatibility
NOTE
Operating
Environment
Housing
Motor Load
Size
Mounting
Standards
2
Input:
(120/277 VAC-SP20-MV), (347 VAC-SP15-347),
(220-240 VAC-SP20-240), 50/60 Hz operation.
Contacts are isolated and may be used to control
low voltage circuits
Output:
15 VDC 125mA to operate up to five Greengate
sensors
Connecting the 22 AWG red and blue control leads
to each other will close the relay contacts
Compatible with magnetic and electronic ballasts
The life of some compact fluorescent lamps (CFLs)
is shortened by frequent automatic or manual
switching. Check with the CFL and ballast manufacturer to determine effects of cycling
Temperature: 32°F - 104°F (0°C - 40°C)
Relative humidity: Less than 95%, non-condensing
For indoor use only
Medium impact injection molded housing. ABS
resin complies with UL 94V-0. Plenum rated for
external junction box mounting, with Teflon coated
leads
1 HP 120-240 VAC; 2 HP 250 VAC
2 15/16” x 2 7/16” x 1 11/16”
Mounts to the side of a 4" square box via 1/2"
knockout
UL, CSA Listed
www.coopercontrol.com
SP15 & SP20 – Heavy Duty Switchpacks


Description/Operation
The switchpack has two main components: a transformer and one
high current relay. The transformer has a primary line voltage input
and a secondary low voltage output. The low voltage output, 15
VDC, provides operating power to connected low voltage Greengate
occupancy sensors. When an occupancy sensor detects motion,
it electrically closes an internal circuit, pulling up the control signal
between the sensor and the switchpack. This signals the switchpack
to close its high current relay, turning the connected load on.
Applications
The switchpack is designed to work with low voltage sensors which
require switchpacks. It cannot be used with sensors designed for
use with any other low voltage relay systems. Consult sensor spec
sheets for other sensor relay combinations.
Catalog Number:
SP20-MV
Submitted by Illumination Systems, Inc
Job Name:
Type:
PP1
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
Technical Data
SP15 & SP20 – Heavy Duty Switchpacks


November 2014
Wiring Diagrams
A/B Switching
Three Way Switching
HOT
HOT
LINE
3. SWITCHES CAN BE USED TO TURN
LOADS ON OR OFF.
RECOMMENDED WIRE:
18-3 AWG STRANDED WIRE SHIELDED OR
NON/SHIELDED
RED (15 VDC)
SWITCHPACK
BLUE (CONTROL)
LOAD "B"
2. LOAD TURNS OFF, WHEN SENSOR
TIMES OUT.
**USE BLACK LEAD FOR 120 VAC.
USE ORANGE LEAD FOR 277 VAC.
CAP UNUSED LEAD.
3. SWITCHES CAN BE USED TO TURN
LOADS ON OR OFF.
BLUE
RECOMMENDED WIRE:
18-3 AWG STRANDED WIRE SHIELDED OR
NON/SHIELDED
BLACK (COMMON)
RED (15 VDC)
BLUE (CONTROL)
WHITE
1. WHEN SENSOR ACTIVATES, LOAD
TURNS ON.
LOAD "A"
BLUE
WHITE
**USE BLACK LEAD FOR 120 VAC.
USE ORANGE LEAD FOR 277 VAC.
CAP UNUSED LEAD.
BLUE
2. LOADS TURN OFF, WHEN SENSOR
TIMES OUT.
**HOT
1. WHEN SENSOR ACTIVATES, LOADS
TURN ON.
NEUTRAL
AUTOMATIC MODE OPERATION:
NEUTRAL
**HOT
LINE
AUTOMATIC MODE OPERATION:
SWITCHPACK
LOAD
WALL BOX 1
WALL BOX 2
BLUE
BLACK (COMMON)
THREE-WAY SWITCHES
RED (10-30 VDC)
RED (10-30 VDC)
TO ADDITIONAL SENSORS.
MAXIMUM 5 SENSORS PER SWITCHPACK.
BLUE (CONTROL)
BLACK (COMMON)
BLACK (COMMON)
Standard Configuration
2 Circuits, 1 Sensor
HOT
LINE
NEUTRAL
BLUE
1. WHEN SENSOR ACTIVATES, LOADS
TURN ON.
BLACK (COMMON)
2. LOADS TURN OFF, WHEN SENSOR
TIMES OUT.
TO ADDITIONAL SENSORS.
MAXIMUM 5 SENSORS PER SWITCHPACK.
BLUE (CONTROL)
WHITE
HOT
LINE
NEUTRAL
**USE BLACK LEAD FOR 120 VAC.
USE ORANGE LEAD FOR 277 VAC.
CAP UNUSED LEAD.
RED (15 VDC)
SWITCHPACK
BLUE (CONTROL)
TO ADDITIONAL SWITCHPACKS.
MAXIMUM 10 SWITCHPACKS PER SENSOR.
LOAD "B"
BLUE
BLACK (COMMON)
RECOMMENDED WIRE:
18-3 AWG STRANDED WIRE SHIELDED OR
NON/SHIELDED
BLACK (COMMON)
LOAD "A"
SWITCHPACK
3. SWITCHES CAN BE USED TO TURN
LOADS ON OR OFF.
RED (10-30 VDC)
BLUE (CONTROL)
RED (15 VDC )
BLUE
BLUE
AUTOMATIC MODE OPERATION:
WHITE
BLUE (CONTROL)
SWITCHPACK
**USE BLACK LEAD FOR 120 VAC.
USE ORANGE LEAD FOR 277 VAC.
CAP UNUSED LEAD.
LOAD
BLUE
RED (15 VDC)
WHITE
**USE BLACK LEAD FOR 120 VAC.
USE ORANGE LEAD FOR 277 VAC.
CAP UNUSED LEAD.
NEUTRAL
**HOT
RECOMMENDED WIRE:
18-3 AWG STRANDED WIRE SHIELDED OR
NON/SHIELDED
HOT
LINE
**HOT
1. WHEN SENSOR ACTIVATES, LOAD
TURNS ON.
**HOT
AUTOMATIC MODE OPERATION:
2. LOAD TURNS OFF, WHEN SENSOR
TIMES OUT.
TO ADDITIONAL SENSORS.
MAXIMUM 5 SENSORS PER SWITCHPACK.
BLUE (CONTROL)
BLACK (COMMON)
BLUE
RED (10-30VDC)
BLUE (CONTROL)
TO ADDITIONAL SENSORS.
MAXIMUM 5 SENSORS PER SWITCHPACK.
BLACK (COMMON)
Mounting
All connections are made via pigtails with twist-on
wire connectors.
NNote: Connect either the orange or black supply lead
to the power source, depending upon the power
requirements. Cap the unused lead.
www.coopercontrol.com
3
Catalog Number:
SP20-MV
Submitted by Illumination Systems, Inc
Job Name:
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
Type:
PP1
ISI15-38614
Technical Data
SP15 & SP20 – Heavy Duty Switchpacks


November 2014
Ordering
Catalog #
Ratings
Ballast
Tungsten
Motor (HP)
Output
SP20-MV
SP15-347
120/277 VAC, 50/60 Hz
347 VAC, 50/60 Hz
20A
15A
15A, 120V
NR
1HP-120V, 2HP-250V
NR
15 VDC, 125mA
15 VDC, 125mA
SP20-240
220-240 VAC, 50/60 Hz
20A
NR
NR
15 VDC, 125mA
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Controls Business
203 Cooper Circle
Peachtree City, GA 30269
coopercontrol.com
© 2014 Eaton
All Rights Reserved
Printed in USA
Publication No. ACC141014
November 5, 2014
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Catalog Number:
KEEPER NW KIT
Submitted by Illumination Systems, Inc
Job Name:
Type:
SA
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
Technical Data
Effective September 19, 2014
Keeper Enterprise
Catalog#
Prepared by
Project
Date
Comments
Type
Overview
Keeper Enterprise is an accessory to program both network panels
and stand-alone panels. There is a network and stand-alone version
of the Keeper Enterprise software which allows the user to easily
program, edit and maintain operating files for your lighting control
system from one or more computers.
Features
Edit and program your lighting control systems through your
computer
Upload and download lighting control programs
Access network or stand-alone panels for real-time control
and status
Load grouping via remote commands
Several functional reports
Create snapshots of panel programming for backup
Software allows you to organize your lighting control system into
multiple sites, buildings, networks or panels
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
KEEPER NW KIT
Type:
SA
Colorow Elementary
Notes: FACTORY DRAWINGS TO FOLLOW
ISI15-38614
Technical Data 
Keeper Enterprise


September 2014
Computer Specifications
Computer
Specifications
Ordering
This is an accessory for Greengate Lighting Control Systems.
Operating System
Windows 7 and below
CD-ROM
Network Card
Catalog #
Description
KEEPER NW KIT
KEEPER SA KIT
Keeper Enterprise Network
Keeper Enterprise Stand Alone
Description/Operation
The Keeper Enterprise software accessory provides access to
network and stand-alone lighting control panels. The software
permits the user to upload and download programs files, control
relays, check relay status, check relay run-time, view logs and more
with an easy user interface. Panel program files can be created,
altered and archived on the computer. The tree structure allows you
to organize your panels into sites, networks and buildings. Right
click on a panel, building or network to communicate to your lighting
control panels. The Keeper Enterprise can communicate via serial,
modem and TCP/IP communications.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Controls Business
203 Cooper Circle
Peachtree City, GA 30269
coopercontrol.com
© 2014 Eaton
All Rights Reserved
Printed in USA
Publication No. ACC131627
September 19, 2014
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
FACTORY STARTUP
Colorow Elementary
Notes:
Type:
SU
ISI15-38614
Electrical Contractor,
Thank you for requesting information regarding the startup and training for a lighting
control system by Eaton’s Cooper Controls. The enclosed information should be
reviewed and completed immediately to ensure timely completion of your project.
Startup appears as a line item on the Bill of Material for this project, and the system will
be completely field-tested by a factory-authorized service person within the time allotted
(see reference document on page 5 for full description of system startup and training).
Complete all related documents and return via fax at 800-954-7016 or via email to
ControlTechSupport@Eaton.com
Eaton requires 21 days notice from receipt of completed paperwork in order to
schedule startup.
For All Systems:
Please review the following items:
•
Pre-startup checklist. This confirms that the project is ready for startup.
•
All electrical services and other hardware pertaining to the lighting project should be
completely installed at the time of the startup. A complete installation means that all
loads have been tested for continuity and freedom of short circuits, and that all
control wiring is connected and terminated. We will need access to all controlled
areas of the building and the assistance of a project electrician to check out the
system.
•
Please insure that all persons involved with the maintenance and operation of the
system can be present for training and instruction.
o 1 hour - hardware demonstration and familiarization.
o 1-2 hours – software demonstration and familiarization.
•
Relay and Dimming Panel Forms. Please complete the appropriate system
worksheet per panel, with the desired programming for each panel. Link to
Greengate Relay Panel Form. Link to iLumin Dimming Panel Form.
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
FACTORY STARTUP
Type:
SU
Colorow Elementary
Notes:
ISI15-38614
For Greengate Systems:
• If the system includes GDS switches, please complete the GDS Switch Station Form
to record the desired programming for these switches. Please indicate which panel
the switch is wired to, as well as the reference number of the switch, and which
relays each button should control. If there are special programming requests such as
after-hours timers or other special interactions not defined in the sequence of
operations, please also indicate this.
•
If the system includes an Ethernet Interface Module (EIM) for remote
connection/diagnostics, please complete the Remote Connection Form. Please give
this form to the Network Administrator, so that they may provide us with the
necessary network information.
•
If the system includes an Automation Interface Module (AIM) for BMS integration,
please complete the BMS Integration Form to include the information that will allow
us to configure this device. The desired communications parameters/settings are on
the second page of this worksheet and should be provided by the BMS integrator.
•
If the system includes VisionTouch Software on site please provide the following:
o AUTOCAD drawings in electronic format which depict the backgrounds you
desire for this graphical screen interface.
o Indication of which zones you wish to control.
For iLumin Systems:
•
•
•
•
If the system includes a SI-2-NA for A/V integration, the integrator should be present
at the time of commissioning to ensure connectivity at the time of commissioning.
If the system includes a SI-2-NA-CP for partitioning, please provide a layout of the
room/s to be partitioned and how the areas are to be configured (see example for
clarification). Include what devices are controlling each area i.e. occupancy sensor,
photocell, TSC, etc.
If the system includes a Control Interface Module (CIM) for BMS integration, please
complete the BMS Integration Form. The desired communications
parameters/settings are on the second page of this worksheet and should be
provided by the BMS integrator.
If the system includes an Ineo or Revio keypads , please complete the Ineo/Revio
Switch Station Form to indicate the required programming for each device.
STARTUP WILL NOT BE SCHEDULED UNTIL THIS INFORMATION IS RECEIVED.
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
FACTORY STARTUP
Type:
SU
Colorow Elementary
Notes:
ISI15-38614
Transmittal Form
Eaton’s Cooper Controls
203 Cooper Circle
Peachtree City, GA 30269
Phone: 800-553-3879
Fax: 800-954-7016
ControlTechSupport@Eaton.com
From:
(Electrical Contractor)
RE: Factory Start-Up
In accordance with Eaton’s terms and conditions this letter serves as written notification
requesting a Field Service Engineer to perform a system start up beginning on the
following date: _________________________________
Subject to Technician Availability
The control system will be completely installed by the date above. If the installation is
not complete at the specified time, I understand that additional expenses may be
incurred from Eaton for extra trips to complete system programming.
I understand that the requested date is subject to technician availability and is not
guaranteed until confirmed by Eaton. Further, I acknowledge that a date for startup
cannot be provided until all of the paperwork is submitted and complete.
Signature:
If you have any questions concerning the paperwork, startup, and/or training please call
our Technical Support Center at 800-553-3879 and select the option for Technical
Assistance. We look forward to working with you on this project.
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
FACTORY STARTUP
Colorow Elementary
Notes:
Type:
SU
ISI15-38614
Contact Form --- Please fill out completely.
Agent Contact Information:
Agent :
Agent Contact:
Agent Phone#:
Site Information:
Job Name:
Job Address:
City/State/Zip:
Job PO Number:
Contractor Contact Information
Contact Name:
Phone Number:
E-mail Address:
Site Contact Name:
Site Contact Phone Number:
Site Contact E-mail Address:
Submitted by Illumination Systems, Inc
Job Name:
Catalog Number:
FACTORY STARTUP
Colorow Elementary
Notes:
Type:
SU
ISI15-38614
Startup and Training Reference Document
Startup and Training includes the following:
CHECK SYSTEM HARDWARE:
1. Check-out of inputs and outputs for installation and function.
2. Check-out of network communications.
CHECK SYSTEM SOFTWARE:
1. Check-out all computer software functions.
2. Review scheduling and programming parameters.
TRAINING:
1. Demonstrate hardware including: function, diagnostic indicators, connections,
troubleshooting, and replacement.
2. Instruction on all software functions including keypad or software programming,
and system monitoring.
3. Hands on training for system management including functions in #2.