hot dip galvanized

advertisement

HOT DIP GALVANIZED

Topaz is proud to support the rebuilding of our nations infrastructure by offering new Hot Dipped Galvanized products that meet the strict requirements for outdoor installation in a harsh environment.

Hot Dip Galvanized Products

Topaz Hot Dip Galvanized Electrical Fittings are designed to resist corrosion and provide superior protection from harsh environments.

Can be used on infrastructure projects like Bridges, Tunnels, Railways and other large mass transit projects where approved.

• UL Listed E195122, E148716, E174011, E195124

• NEMA FB1

• Conforms to finish thickness ASTM A123/123M

The Hot Dip Galvanized Process

The Hot Dip Galvanized process is achieved by passing the product through a molten bath of zinc at an extreme temperature. This results in a metallurgical bond between zinc and steel with a series of distinct iron-zinc alloys. The hot zinc forms a thicker coating which prevents corrosion to the product and forms a physical barrier, which acts as a sacrificial anode should the barrier be damaged.

Product is

Skimmed to remove surface oils

Run through an acid wash

Water washed

Run through a dip fluxing solvent to enhance coating and adhesion

Dry heated

(120-180 degrees

Celsius

Hot dip galvanized

Water cooled and passivated.

1

HOT DIP GALVANIZED

RIGID LB TYPE

WITH ROLLERS

APPLICATIONS:

• Provide taps for branch conduit runs

• Make 90 degree bends in conduit runs

• Act as pull outlets for conductors being installed

• Provide openings for making splices and taps in conductors

• Provide for access to conductors for maintenance and future

system changes

• Connect conduit sections

FEATURES:

• Built–in rollers to facilitate wire pulling.

• Hot Dip Galvanized finish provides superior protection against

severe environmental factors.

• Meets project specifications for Department of Transportation &

Mass Transit.

• For use on infrastructure projects including bridges, subways,

railways and other means of transportation.

•For Governmental Use on Federal and State approved Projects

MATERIAL:

• Body Malleable Iron

• Rollers Steel

FINISH:

Hot Dip Galvanized

A

C

E195124

Conforms to finish thickness

ASTM A123/123M

UL514B

NEMA FB1

B

2

Part No.

LBR4MHDG

LBR5MHDG

LBR6MHDG

LBR7MHDG

UPC

86670

86671

86672

86673

LBR8MHDG

LBR9MHDG

86674

86675

LBR10MHDG 86676

Trade

Size

1-1/4"

1-1/2"

2"

2-1/2’

3"

3-1/2"

4"

Type

LBR

LBR

LBR

LBR

LBR

LBR

LBR

Ship

Case

5

2

1

1

1

1

1

Weight

Case

13

7

6

11

13

22

24

Max No.

Conductors

3#2 AWG

3#1/0 AWG

3#4/0 AWG

3-300 MCM

3-350 MCM

3-500 MCM

3-500 MCM

Internal

Volume (in 3 )

32.3

35.3

73

138

170

300

328

A

8.12

8.15

10.53

13.76

13.82

16.65

16.65

B

3.49

3.69

4.52

5.39

6.18

7.19

7.36

C

2.52

2.52

3.15

4.45

4.45

5.53

5.53

WWW.TOPAZ-USA.COM

RIGID LB TYPE

APPLICATIONS:

• Provide taps for branch conduit runs

• Make 90 degree bends in conduit runs

• Act as pull outlets for conductors being installed

• Provide openings for making splices and taps in conductors

• Provide for access to conductors for maintenance and future

system changes

• Connect conduit sections

FEATURES:

• Hot Dip Galvanized finish provides superior protection against

severe environmental factors.

• Meets project specifications for Department of Transportation &

Mass Transit.

• For use on infrastructure projects including bridges, subways,

railways and other means of transportation.

•For Governmental Use on Federal and State approved Projects

MATERIAL:

• Body Malleable Iron

FINISH:

Hot Dip Galvanized

E195124

Conforms to finish thickness

ASTM A123/123M

UL514B

NEMA FB1

A

C

Part No.

LB1MHDG

LB2MHDG

LB3MHDG

LB4MHDG

LB5MHDG

LB6MHDG

LB7MHDG

LB8MHDG

LB9MHDG

LB10MHDG

UPC

86613

86614

86615

86616

86617

86618

86619

86620

86621

86622

Trade

Size

1/2"

3/4"

1"

1-1/4"

1-1/2"

2"

2-1/2"

3"

3-1/2"

4"

LB

LB

LB

LB

Type

LB

LB

LB

LB

LB

LB

Ship

Case

10

10

5

5

2

1

1

1

1

1

Weight

Case

7

12

11

9

6

6

10

13

22

24

Max No.

Conductors

---

3#6 AWG

3#4 AWG

3#2 AWG

3#1/0 AWG

3#4/0 AWG

3-300 MCM

3-350 MCM

3-500 MCM

3-500 MCM

Internal

Volume (in 3 )

4.5

7.5

12.5

32.3

35.3

73

138

170

300

328

A

4.69

5.42

6.28

8.12

8.15

10.53

13.76

13.82

16.65

16.65

B

2.18

2.36

2.86

3.49

3.69

4.52

5.39

6.18

7.19

7.36

C

1.36

1.57

1.79

2.52

2.52

3.15

4.45

4.45

5.53

5.53

B

3

HOT DIP GALVANIZED

RIGID C TYPE WITH ROLLERS

APPLICATIONS:

• Provide taps for branch conduit runs

• Make 90 degree bends in conduit runs

• Act as pull outlets for conductors being installed

• Provide openings for making splices and taps in conductors

• Provide for access to conductors for maintenance and future

system changes

• Connect conduit sections

FEATURES:

• Built–in rollers to facilitate wire pulling.

• Hot Dip Galvanized finish provides superior protection against

severe environmental factors.

• Meets project specifications for Department of Transportation &

Mass Transit.

• For use on infrastructure projects including bridges, subways,

railways and other means of transportation.

•For Governmental Use on Federal and State approved Projects

MATERIAL:

• Body Malleable Iron

• Rollers Steel

FINISH:

Hot Dip Galvanized

E195124

Conforms to finish thickness

ASTM A123/123M

UL514B

NEMA FB1

A

C

B

4

Part No.

UPC

CR4MHDG 86677

CR5MHDG 86678

CR6MHDG 86679

CR7MHDG 86680

CR8MHDG 86681

CR9MHDG 86682

CR10MHDG 86683

Trade

Size Type

1-1/4" CR

1-1/2" CR

2" CR

2-1/2" CR

3" CR

3-1/2" CR

4" CR

Ship

Case

1

1

5

2

1

1

1

Weight

Case

15

6

6

11

16

28

24

Max No.

Conductors

3#2

3#1/0

3#3/0

3-250MCM

3-250MCM

3-350MCM

3-350MCM

Internal

Volume (in 3 )

32.3

35.3

73

138

170

300

328

A B

9.00

2.60

9.07

2.80

11.54

3.52

15.28

3.98

15.39

4.65

18.30

5.43

18.30

5.74

C

2.52

2.52

3.15

4.45

4.45

5.53

5.53

WWW.TOPAZ-USA.COM

RIGID C TYPE

APPLICATIONS:

• Provide taps for branch conduit runs

• Make 90 degree bends in conduit runs

• Act as pull outlets for conductors being installed

• Provide openings for making splices and taps in conductors

• Provide for access to conductors for maintenance and future

system changes

• Connect conduit sections

FEATURES:

• Hot Dip Galvanized finish provides superior protection against

severe environmental factors.

• Meets project specifications for Department of Transportation &

Mass Transit.

• For use on infrastructure projects including bridges, subways,

railways and other means of transportation.

•For Governmental Use on Federal and State approved Projects

MATERIAL:

• Body Malleable Iron

FINISH:

Hot Dip Galvanized

E195124

Conforms to finish thickness

ASTM A123/123M

UL514B

NEMA FB1

A

C

B

Part No.

C1MHDG

C2MHDG

C3MHDG

C4MHDG

C5MHDG

C6MHDG

C7MHDG

C8MHDG

C9MHDG

C10MHDG

UPC

86643

86644

86645

86646

86647

86648

86649

86650

86651

86652

Trade

Size

1/2”

3/4"

1"

1-1/4"

1-1/2"

2"

2-1/2"

3"

3-1/2"

4"

Type

C

C

C

C

C

C

C

C

C

C

Ship

Case

1

1

1

1

1

10

10

5

5

2

Weight

Case

6

10

15

27

24

6

12

6

9

6

Max No.

Conductors

-

3#6

3#4

3#2

3#1/0

3#3/0

3-250MCM

3-250MCM

3-350MCM

3-350MCM

Internal

Volume (in 3 )

73

138

170

300

328

4.5

7.5

12.5

32.3

35.3

A

11.54

15.28

15.39

18.30

18.30

5.43

6.18

7.16

9.00

9.07

B

3.52

3.98

4.65

5.43

5.74

1.46

1.65

1.98

2.60

2.80

C

1.36

1.57

1.79

2.52

2.52

3.15

4.45

4.45

5.53

5.53

5

HOT DIP GALVANIZED

RIGID LL TYPE

APPLICATIONS:

• Provide taps for branch conduit runs

• Make 90 degree bends in conduit runs

• Act as pull outlets for conductors being installed

• Provide openings for making splices and taps in conductors

• Provide for access to conductors for maintenance and future

system changes

• Connect conduit sections

FEATURES:

• Hot Dip Galvanized finish provides superior protection against

severe environmental factors.

• Meets project specifications for Department of Transportation &

Mass Transit.

• For use on infrastructure projects including bridges, subways,

railways and other means of transportation.

•For Governmental Use on Federal and State approved Projects

MATERIAL:

• Body Malleable Iron

FINISH:

Hot Dip Galvanized

E195124

Conforms to finish thickness

ASTM A123/123M

UL514B

NEMA FB1

A

C

6

Part No.

LL1MHDG

UPC

86623

LL2MHDG 86624

LL3MHDG 86625

LL4MHDG 86626

LL5MHDG 86627

LL6MHDG 86628

LL7MHDG 86629

LL8MHDG 86630

LL9MHDG 86631

LL10MHDG 86632

Trade

Size

1/2"

3/4"

1"

1-1/4"

1-1/2"

2"

2-1/2" LL

3" LL

3-1/2’ LL

4" LL

Type

LL

LL

LL

LL

LL

LL

Ship

Case

10

10

5

5

2

1

1

1

1

1

Weight

Case

7

10

6

13

6

6

10

13

22

24

Max No.

Conductors

-

3#6

3#4

3#2

3#1/0

3#4/0

3-300MCM

3-350MCM

3-350MCM

3-350MCM

Internal

Volume (in 3 )

4.5

7.5

12.5

32.3

35.3

73

138

170

300

328

A

4.69

5.42

6.28

8.12

8.15

10.53

13.76

13.82

16.65

16.65

B

1.46

1.65

1.98

2.60

2.80

3.52

3.98

4.65

5.43

5.74

C

2.08

2.31

2.68

3.41

3.45

4.15

5.86

5.92

7.14

7.19

B

WWW.TOPAZ-USA.COM

RIGID LR TYPE

APPLICATIONS:

• Provide taps for branch conduit runs

• Make 90 degree bends in conduit runs

• Act as pull outlets for conductors being installed

• Provide openings for making splices and taps in conductors

• Provide for access to conductors for maintenance and future

system changes

• Connect conduit sections

FEATURES:

• Hot Dip Galvanized finish provides superior protection against

severe environmental factors.

• Meets project specifications for Department of Transportation &

Mass Transit.

• For use on infrastructure projects including bridges, subways,

railways and other means of transportation.

•For Governmental Use on Federal and State approved Projects

MATERIAL:

• Body Malleable Iron

FINISH:

Hot Dip Galvanized

E195124

Conforms to finish thickness

ASTM A123/123M

UL514B

NEMA FB1

A

C

Part No.

LR1MHDG

UPC

86633

LR2MHDG 86634

LR3MHDG 86635

LR4MHDG 86636

LR5MHDG 86637

LR6MHDG 86638

LR7MHDG 86639

LR8MHDG 86640

LR9MHDG 86641

LR10MHDG 86642

Trade

Size

1/2"

Type

LR

3/4"

1"

LR

LR

1-1/4" LR

1-1/2" LR

2" LR

2-1/2" LR

3" LR

3-1/2’ LR

4" LR

1

1

2

1

1

1

Ship

Case

10

10

5

5

10

13

6

6

22

24

Weight

Case

7

10

6

13

Max No.

Conductors

-

3#6

3#4

3#2

3#1/0

3#4/0

3-300MCM

3-350MCM

3-350MCM

3-350MCM

Internal

Volume (in 3 )

4.5

7.5

12.5

32.3

35.3

73

138

170

300

328

8.15

10.53

13.76

13.82

16.65

16.65

A

4.69

5.42

6.28

8.12

2.80

3.52

3.98

4.65

5.43

5.74

B

1.46

1.65

1.98

2.60

C

2.08

2.31

2.68

3.41

3.45

4.15

5.86

5.92

7.14

7.19

B

7

RIGID T TYPE

MALLEABLE IRON

APPLICATIONS:

• Provide taps for branch conduit runs

• Make 90 degree bends in conduit runs

• Act as pull outlets for conductors being installed

• Provide openings for making splices and taps in conductors

• Provide for access to conductors for maintenance and future

system changes

• Connect conduit sections

FEATURES:

• Hot Dip Galvanized finish provides superior protection against

severe environmental factors.

• Meets project specifications for Department of Transportation &

Mass Transit.

• For use on infrastructure projects including bridges, subways,

railways and other means of transportation.

•For Governmental Use on Federal and State approved Projects

MATERIAL:

• Body Malleable Iron

FINISH:

Hot Dip Galvanized

A

C

E195124

Conforms to finish thickness

ASTM A123/123M

UL514B

NEMA FB1

B

8

Part No.

T1MHDG

T2MHDG

T3MHDG

T4MHDG

T5MHDG

T6MHDG

T7MHDG

T8MHDG

T9MHDG

T10MHDG

UPC

86653

86654

86655

86656

86657

86658

86659

86660

86661

86662

Trade

Size

1/2"

3/4"

1"

1-1/4"

1-1/2"

2"

2-1/2"

3"

3-1/2’

4"

Type

T

T

T

T

T

T

T

T

T

T

Ship

Case

10

10

5

5

2

1

1

1

1

1

Weight

Case

9

14

6

11

8

6

12

15

27

28

Max No.

Conductors

-

3#6

3#4

3#2

3#1

3#2/0

3#4/0

3#4/0

3-350MCM

3-350MCM

Internal

Volume (in 3 )

6

9.5

15

33

36

75

138

170

300

328

A

5.35

6.00

7.06

7.25

9.25

11.50

15.00

15.125

18.125

18.125

B

1.31

1.62

1.88

2.50

2.67

3.29

3.94

4.75

5.20

5.56

C

2.02

2.22

2.56

3.50

3.50

4.25

5.72

8.88

6.81

7.20

WWW.TOPAZ-USA.COM

MALLEABLE IRON COVER

APPLICATIONS:

Use to cover malleable iron conduit bodies. 1/2"-4"

FEATURES:

Hot Dip Galvanized for added durability and corrosion protection, use with Gasket for wet locations.

MATERIAL:

Malleable Iron

Galvanized Steel Screws

FINISH:

Hot Dip Galvanized

E195124

Conforms to finish thickness

ASTM A123/123M

UL514B

NEMA FB1

A

B

Part No.

571MHDG

572MHDG

573MHDG

574MHDG

576MHDG

577MHDG

579MHDG

UPC

86663

86664

86665

86666

86667

86668

86669

Description

1/2" Malleable Iron Cover

3/4" Malleable Iron Cover

1" Malleable Iron Cover

1-1/4" & 1-1/2" Malleable Iron Cover

2" Malleable Iron Cover

2-1/2" & 3" Malleable Iron Cover

3-1/2" & 4" Malleable Iron Cover

---

---

---

Unit

Ctn.

10

10

5

---

Ship

Case

100

100

50

25

25

10

10

Weight

Case

24

31

21

23

52

35

55

A

3.97

4.68

5.39

7.23

9.51

12.24

14.99

B

1.34

1.57

1.79

2.52

3.15

4.45

5.53

9

HOT DIP GALVANIZED

RIGID 3-PIECE COUPLING

APPLICATIONS:

Used to join two lengths of threaded conduit or IMC, when neither can be rotated.

FEATURES:

For threaded rigid conduit and IMC Hot Dip Galvanized for superior protection against corrosion

MATERIAL:

Malleable Iron

FINISH:

Hot Dip Galvanized

E148716

Conforms to finish thickness

ASTM A123/123M

UL

RoHS

NEMA FB1

Federal Spec. A-A-50553

B

10

A

Part No.

851HDG

852HDG

853HDG

854HDG

855HDG

856HDG

857HDG

858HDG

859HDG

86710

86711

860HDG 86712

860AHDG 86713

860BHDG 86714

UPC

86703

86704

86705

86706

86707

86708

86709

Description

1/2" Rigid 3-Piece Coupling Malleable Iron

3/4" Rigid 3-Piece Coupling Malleable Iron

1" Rigid 3-Piece Coupling Malleable Iron

1-1/4" Rigid 3-Piece Coupling Malleable Iron

1-1/2" Rigid 3-Piece Coupling Malleable Iron

2" Rigid 3-Piece Coupling Malleable Iron

2-1/2" Rigid 3-Piece Coupling Malleable Iron

3" Rigid 3-Piece Coupling Malleable Iron

3-1/2" Rigid 3-Piece Coupling Malleable Iron

4" Rigid 3-Piece Coupling Malleable Iron

5" Rigid 3-Piece Coupling Malleable Iron

6" Rigid 3-Piece Coupling Malleable Iron

---

---

---

---

---

3

2

---

Unit

Ctn.

20

10

5

5

2

1

5

5

1

30

20

10

Ship

Case

200

100

50

50

20

28

18

9

11

44

44

37

Weight

Case

24

30

23

55

1.94

2.23

3.09

3.19

3.37

A

1.36

1.41

1.62

1.83

3.45

4.38

4.38

2.59

3.14

3.72

4.37

4.90

B

1.31

1.57

1.87

2.28

5.44

7.00

8.25

WWW.TOPAZ-USA.COM

MALLEABLE INSULATED

GROUNDING BUSHINGS

APPLICATIONS:

Used to provide a means of grounding Rigid or IMC conduit.

FEATURES:

Tin Plated aluminum alloy 6060-T6 rated for AL and

CU conductor. 150°C plastic insuliner. Hot Dip Galvanized for superior protection against corrosion.

MATERIAL:

Malleable Iron

Aluminum Lug

Plastic Insuliner

FINISH:

Hot Dip Galvanized

E195122

Conforms to finish thickness

ASTM A123/123M

UL

RoHS

NEMA FB1

Federal Spec. A-A-50553

B

A

Part No.

331MHDG

332MHDG

333MHDG

334MHDG

335MHDG

UPC Description

86684 1/2" Rigid Malleable Insulated Grounding Bushings

86685 3/4" Rigid Malleable Insulated Grounding Bushing

86686 1" Rigid Malleable Insulated Grounding Bushing

86688 1-1/4" Rigid Malleable Insulated Grounding Bushing

86690 1-1/2" Rigid Malleable Insulated Grounding Bushing

336MHDG

337MHDG

338MHDG

339MHDG

86692

86693

2" Rigid Malleable Insulated Grounding Bushing

2-1/2" Rigid Malleable Insulated Grounding Bushing

10

5

86695 3" Rigid Malleable Insulated Grounding Bushing ---

86697 3-1/2" Rigid Malleable Insulated Grounding Bushing ---

340MHDG 86699 4" Rigid Malleable Insulated Grounding Bushing

340ALMHDG 86701 5" Rigid Malleable Insulated Grounding Bushing

340BLMHDG 86702 6" Rigid Malleable Insulated Grounding Bushing

---

---

---

25

20

10

Unit

Ctn.

50

50

100

50

25

10

10

10

10

Ship

Case

500

500

250

200

100

30

25

18

20

24

27

32

Weight

Case

45

50

32

36

25

2.72

3.23

3.88

4.43

4.89

6.10

7.15

A

1.08

1.31

1.61

1.91

2.16

.73

.94

.94

.94

.94

1.14

1.14

B

.57

.57

.65

.71

.73

11

HOT DIP GALVANIZED

EMT/RIGID CLAMP BACKS

MALLEABLE IRON

APPLICATIONS:

For use in wet or dry locations in conjunction with malleable rigid conduit straps to create space between conduit and mounting surface.

FEATURES:

Hot Dip Galvanized for added durability and corrosion protection.

MATERIAL:

Malleable Iron

FINISH:

Hot Dip Galvanized

E174011

Conforms to finish thickness

ASTM A123/123M

UL

RoHS

NEMA FB1

Federal Spec. A-A-50553

12

Part No.

481HDG

482HDG

483HDG

484HDG

485HDG

486HDG

487HDG

488HDG

489HDG

489AHDG

489BHDG

489CHDG

UPC Description

86601 1/2" EMT/RGD Clamp Back

86602 3/4 " EMT/RGD Clamp Back

86603 1" EMT/RGD Clamp Back

86604 1-1/4" EMT/RGD Clamp Back

86605 1-1/2 " EMT/RGD Clamp Back

86606 2" EMT/RGD Clamp Back

86607 2-1/2" EMT/RGD Clamp Back

86608 3" EMT/RGD Clamp Back

86609 3-1/2" EMT/RGD Clamp Back

86610 4" EMT/RGD Clamp Back

86611 5" EMT/RGD Clamp Back

86612 6" EMT/RGD Clamp Back

A

B

5

---

---

---

---

---

---

Unit

Ctn.

Ship

Case

25 250

25 250

25 250

10 100

10 100

50

25

10

12

18

10

10

22

14

9

10

21

21

29

Weight

Case

15

23

35

21

27

4.73

5.48

6.66

7.12

8.43

10.78

12.68

A

2.06

2.44

2.92

3.41

3.78

1.92

2.42

2.63

2.87

3.12

3.68

3.96

B

1.01

1.20

1.31

1.49

1.52

.80

.80

.83

1.03

1.09

1.30

1.89

C

.44

.48

.56

.67

.76

WWW.TOPAZ-USA.COM

1 HOLE RIGID STRAP

APPLICATIONS:

Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required.

FEATURES:

Hot Dip Galvanized for added durability and corrosion

protection.

MATERIAL:

Malleable Iron

FINISH:

Hot Dip Galvanized

E174011

Conforms to finish thickness

ASTM A123/123M

UL514B

NEMA FB1

Part No.

561HDG

562HDG

563HDG

564HDG

565HDG

566HDG

567HDG

568HDG

569HDG

86596

86597

570HDG 86599

570AHDG 86599

UPC

86589

86590

86591

86592

86593

86594

86595

570BHDG 86600

Description

1/2" 1 Hole Rigid Strap

3/4" 1 Hole Rigid Strap

1" 1 Hole Rigid Strap

1-1/4" 1 Hole Rigid Strap

1-1/2" 1 Hole Rigid Strap

2" 1 Hole Rigid Strap

2-1/2" 1 Hole Rigid Strap

3" 1 Hole Rigid Strap

3-1/2" 1 Hole Rigid Strap

4" 1 Hole Rigid Strap

5" 1 Hole Rigid Strap

6" 1 Hole Rigid Strap

C

A

10

–––

–––

–––

–––

–––

–––

Unit

Ctn.

100

50

25

20

–––

200

100

25

25

25

10

10

Ship

Case

1000

500

250

250

10

Weight

Case

40

25

20

25

25

38

23

34

32

36

17

40

A

1. 98

2.37

2.90

3.12

3.90

4.77

5.45

6.74

7.72

8.13

10.94

12.71

1.05

1.36

1.36

1.54

1.91

2.07

2.55

B

.67

.76

.82

.82

2.91

C

.97

1.10

1.44

1.77

2.06

2.59

3.05

3.77

4.24

4.98

6.22

7.45

B

13

HOT DIP GALVANIZED

RIGID SET SCREW CONNECTORS

APPLICATIONS:

Used to join unthreaded rigid or IMC conduit to box or enclosure

FEATURES:

Concrete-tight when taped. Hot Dip Galvanized for added durability and corrosion protection

MATERIAL:

Malleable Iron

Galvanized Steel Screw

FINISH:

Hot Dip Galvanized

E148716

Conforms to finish thickness

ASTM A123/123M

UL

RoHS

NEMA FB1

Federal Spec. A-A-50553

A

B

14

Part No.

671MHDG

672MHDG

673MHDG

674MHDG

675MHDG

676MHDG

UPC

86725

86726

86727

86728

86729

86730

Description

1/2" Rigid Set Screw Connector Malleable Iron

3/4" Rigid Set Screw Connector Malleable Iron

1" Rigid Set Screw Connector Malleable Iron

1-1/4" Rigid Set Screw Connector Malleable Iron

1-1/2" Rigid Set Screw Connector Malleable Iron

2" Rigid Set Screw Connector Malleable Iron

Unit

Ctn.

Ship

Case

25 250

---

---

5

5

---

25

25

50

50

20

Weight

Case

24

4

6

22

28

15

A

1.51

1.75

1.98

2.22

2.44

2.52

B

1.17

1.39

1.66

2.01

2.25

2.75

WWW.TOPAZ-USA.COM

RIGID SET SCREW COUPLINGS

APPLICATIONS:

Used to join two unthreaded lengths of rigid conduit or IMC

FEATURES:

Concrete-tight when taped. Hot Dip Galvanized for added durability and corrosion protection

MATERIAL:

Malleable Iron

Galvanized Steel Screw

FINISH:

Hot Dip Galvanized

E148716

Conforms to finish thickness

ASTM A123/123M

UL

RoHS

NEMA FB1

Federal Spec. A-A-50553

A

B

Part No.

681MHDG

UPC

86731

682MHDG 86732

683MHDG 86733

684MHDG 86734

685MHDG 86735

686MHDG 86736

Description

1/2" Rigid Set Screw Coupling Malleable Iron

3/4" Rigid Set Screw Coupling Malleable Iron

1" Rigid Set Screw Coupling Malleable Iron

1-1/4" Rigid Set Screw Coupling Malleable Iron

1-1/2" Rigid Set Screw Coupling Malleable Iron

2" Rigid Set Screw Coupling Malleable Iron

Unit

Ctn.

---

---

---

5

4

---

Ship

Case

25

25

25

50

40

20

Weight

Case

5

6

10

33

29

23

A

1.77

1.96

2.69

B

1.17

1.39

1.66

2.73

2.01

3.19

2.25

3.40

2.75

15

HOT DIP GALVANIZED

RIGHT ANGLE CONDUIT SUPPORT

APPLICATIONS:

Right-angle conduit clamps are used to mount EMT or rigid conduits across or perpendicular to beam, channel or angle supports

FEATURES:

Hot Dip Galvanized for added durability and corrosion protection. Provides a secure connection and tight clamping action capable of withstanding heavy loads.

MATERIAL:

Malleable Iron

Galvanized Steel Hardware

FINISH:

Hot Dip Galvanized

A

E174011

Conforms to finish thickness

ASTM A123/123M

UL

RoHS

NEMA FB1

Federal Spec. A-A-50553

C

B

16

Part No.

1551HDG

1552HDG

1553HDG

1554HDG

1555HDG

1556HDG

1557HDG

1558HDG

86585

86586

1559HDG 86587

1559AHDG 86588

UPC

86579

86580

86581

86582

86583

86584

Description

1/2" Right Angle Conduit Support

3/4" Right Angle Conduit Support

1" Right Angle Conduit Support

1-1/4" Right Angle Conduit Support

1-1/2" Right Angle Conduit Support

2" Right Angle Conduit Support

2-1/2" Right Angle Conduit Support

3" Right Angle Conduit Support

3-1/2" Right Angle Conduit Support

4" Right Angle Conduit Support

25

25

25

25

Ship

Case

50

50

50

50

50

25

Weight

Case

20

22

24

27

29

22

27

28

32

35

1.79

2.04

2.49

3.06

3.65

A

.97

1.15

1.42

4.21

4.69

2.07

2.32

2.83

3.39

3.98

B

1.24

1.43

1.70

4.55

5.03

C

2.46

2.76

3.01

3.16

3.52

4.39

4.75

5.38

5.76

6.27

WWW.TOPAZ-USA.COM

PARALLEL CONDUIT SUPPORT

APPLICATIONS:

Parallel conduit supports are used to mount EMT or

Rigid Conduits Parallel to a beam, channel or angle supports.

FEATURES:

Hot Dip Galvanized for added durability and corrosion protection. Provides a secure connection and tight clamping action capable of withstanding heavy loads.

MATERIAL:

Malleable Iron

Galvanized Steel Hardware

FINISH:

Hot Dip Galvanized

E174011

Conforms to finish thickness

ASTM A123/123M

UL

RoHS

NEMA FB1

Federal Spec. A-A-50553

A

B

Part No.

1561HDG

1562HDG

1563HDG

1564HDG

1565HDG

1566HDG

1567HDG

1568HDG

1569HDG

1570HDG

UPC

86737

86738

86739

86554

86555

86556

86557

86558

86559

86560

Description

1/2" Parallel Conduit Support

3/4" Parallel Conduit Support

1" Parallel Conduit Support

1-1/4" Parallel Conduit Support

1-1/2" Parallel Conduit Support

2" Parallel Conduit Support

2-1/2" Parallel Conduit Support

3" Parallel Conduit Support

3-1/2" Parallel Conduit Support

4" Parallel Conduit Support

25

25

10

10

10

10

Ship

Case

50

50

50

25

24

25

14

16

19

22

Weight

Case

29

32

35

18

A

2.80

2.99

3.19

3.39

3.62

4.37

5.12

5.79

6.26

6.46

2.01

2.87

3.23

4.06

4.53

4.61

B

1.42

1.47

1.54

2.01

17

HOT DIP GALVANIZED

EDGE TYPE CONDUIT SUPPORT

APPLICATIONS:

Edge type conduit supports are used to mount EMT or rigid conduits

Perpendicular to a beam, channel or angle supports.

FEATURES:

Hot Dip Galvanized for added durability and corrosion protection.

Provides a secure connection and tight clamping action capable of withstanding heavy loads.

MATERIAL:

Malleable Iron

Galvanized Steel Hardware

FINISH:

Hot Dip Galvanized

E174011

Conforms to finish thickness

ASTM A123/123M

UL

RoHS

NEMA FB1

Federal Spec. A-A-50553

A

B

18

Part No.

1571HDG

1572HDG

1573HDG

1574HDG

1575HDG

1576HDG

1577HDG

1578HDG

UPC

86561

86562

86563

86564

86565

86566

86567

86568

Description

1/2" Edge Type Conduit Support

3/4" Edge Type Conduit Support

1" Edge Type Conduit Support

1-1/4" Edge Type Conduit Support

1-1/2" Edge Type Conduit Support

2" Edge Type Conduit Support

2-1/2" Edge Type Conduit Support

3" Edge Type Conduit Support

Ship

Case

50

50

50

25

25

25

10

10

Weight

Case

34

36

43

23

29

34

19

23

A B

2.10

2.72

2.44

3.01

2.57

2.96

3.27

3.23

3.47

3.65

3.85

4.36

4.40

5.05

5.08

5.41

WWW.TOPAZ-USA.COM

RIGID OFFSET NIPPLES

APPLICATIONS:

Indoor or outdoor use

Use as an offset connector between two enclosures.

Offsets the axis of the raceways by 3/4"

FEATURES:

NPSM Thread: Smooth inside surface to facilitate wire pulling free of damage

MATERIAL:

Malleable Iron

FINISH:

Hot Dipped Galvanized

E148716

Conforms to finish thickness

ASTM A123/123M

UL

RoHS

NEMA FB1

Federal Spec. A-A-50553

A

C

Part No.

111MHDG

112MHDG

113MHDG

114MHDG

115MHDG

116MHDG

117MHDG

118MHDG

119MHDG

86722

86723

119AMHDG 86724

UPC

86715

86716

86717

86718

86719

86720

86721

Description

1/2" Rigid Offset Nipple Malleable Iron

3/4" Rigid Offset Nipple Malleable Iron

1" Rigid Offset Nipple Malleable Iron

1-1/4" Rigid Offset Nipple Malleable Iron

1-1/2" Rigid Offset Nipple Malleable Iron

2" Rigid Offset Nipple Malleable Iron

2-1/2" Rigid Offset Nipple Malleable Iron

3" Rigid Offset Nipple Malleable Iron

3-1/2" Rigid Offset Nipple Malleable Iron

4" Rigid Offset Nipple Malleable Iron

---

---

---

5

2

---

Unit

Ctn.

10

10

10

5

2

1

1

50

20

2

Ship

Case

100

100

100

50

6

1

4

23

13

6

Weight

Case

25

35

49

17

A

2.81

2.75

2.87

3.13

3.13

3.06

2.76

3.97

3.26

4.43

3.81

4.82

4.38

5.04

4.96

B

1.02

1.25

1.56

2.00

2.31

C

.75

.75

.75

.75

.75

.75

.75

.75

.75

.75

B

19

HOT DIP GALVANIZED

RMC U-BOLT WITH HEX NUTS

APPLICATIONS:

Used to support EMT/Rigid conduit/IMC

FEATURES:

For EMT/Rigid/IMC. Heavy Duty, Hex nuts included

MATERIAL:

Steel

FINISH:

Mechanically Galvanized

A

C

D

B

20

Part No.

761HDG

762HDG

763HDG

764HDG

765HDG

766HDG

767HDG

768HDG

769HDG

770HDG

UPC

86569

86570

86571

86572

86573

86574

86575

86576

86577

86578

Description

1/2" RMC U-Bolt with Hex Nuts

3/4" RMC U-Bolt with Hex Nuts

1" RMC U-Bolt with Hex Nuts

1-1/4" RMC U-Bolt with Hex Nuts

1-1/2" RMC U-Bolt with Hex Nuts

2" RMC U-Bolt with Hex Nuts

2-1/2" RMC U-Bolt with Hex Nuts

3" RMC U-Bolt with Hex Nuts

3-1/2" RMC U-Bolt with Hex Nuts

4" RMC U-Bolt with Hex Nuts

---

---

---

---

---

Unit

Ctn.

Ship

Case

25 250

25 250

25 250

--20

--20

20

20

20

20

20

Weight

Case

12.5

15.6

15.7

15.8

18.8

31.3

31.4

37.5

40.6

43.4

2.04

2.49

3.06

3.65

A

.97

1.15

1.42

1.79

4.21

4.69

2.32

2.83

3.39

3.98

4.55

5.03

B

1.24

1.43

1.70

2.07

C

2.46

2.76

3.01

3.16

3.52

4.39

4.75

5.38

5.76

6.27

1.50

1.96

1.96

1.96

D

1.50

1.50

1.50

1.50

1.96

1.96

WWW.TOPAZ-USA.COM

PLEASE CONTACT YOUR LOCAL SALES REPRESENTATIVE FOR PRICING AND AVAILABILITY

New York • 800-666-2852 • Fax: 800-333-3488 www.topaz-usa.com California • 888-551-2852 • Fax: 888-690-2852

21

ALSO AVAILABLE FROM TOPAZ

LIQUID TIGHT CONNECTORS

WITH GROUNDING LUGS

TEMPORARY

LIGHTING SOLUTIONS

99% FILL RATE NEXT DAY DELIVERY

WWW.TOPAZ-USA.COM • 800-666-2852 • FAX 631-758-8026

OUR EXTENSIVE LINE OF

WEATHERPROOF ITEMS

Download