Sanit
Revision Date: 1 February 2013
Version: 2
Material Safety Data Sheet in accordance with NOHSC 2011
1. Identification of the substance/preparation and of the company/undertaking
Trade name: Sanit
Identification of the company
Company Name: Acacia Industries PTY LTD ABN:9714 1269 098
Address:
Level 1 / 530 Little Collins Street MELBOURNE VIC 3000
Telephone/Fax number: 03 9909 7095
03 9909 7096
Recommended Use: Effective cleaning of all hard surface’s that require Sanitizing and/or Disinfecting.
Emergency telephone numbers: 000
2. Hazards identification
Hazard Classification:
Classified as hazardous according to the criteria of ASCC.
Not classified as dangerous goods according to the Australian Code for Transport of Dangerous Goods
(ADG).
Risk phrase(s):
52
Harmful to aquatic life
Safety phrase(s):
36/37/39
Wear suitable protective clothing, gloves and eye/face protection.
61
Avoid unintentional release into the aquatic environment
3. Composition/information on ingredients
Hazardous ingredients
Benzalkonium chloride
CAS#:
68424-85-1
Concentration: <5%
Risk phrases: 21/22, 34, 50
4. First aid measures
After inhalation
Immediately seek fresh air after inhaling of dust, vapour or aerosol.
After contact with skin
Rinse contaminated skin. Seek medical assistance if irritation occurs.
After contact with eyes
Page 1 of 4
Sanit
Revision Date: 1 February 2013
Version: 2
Material Safety Data Sheet in accordance with NOHSC 2011
Rinse eyes with running water. Remove contact lenses (if present) and continue to rinse for at least 15
minutes.
After ingestion
If swallowed seek medical advice immediately (treat symptomatically).
5. Fire-fighting measures
Suitable extinguishing media
Use extinguishing media suitable to the surrounding environment.
Further information
Fire fighters must wear self contained breathing apparatus.
6. Accidental release measures
Environmental precautions
Do not allow to enter drains or waterways
Methods for cleaning up/taking up
Use absorbent material to collect liquid. Place into sealed containers and dispose of.
7. Handling and storage
Advice on safe handling
Keep container tightly closed.
8. Exposure controls / personal protection
National exposure standards
No specific exposure standards have been set for this product.
Occupational exposure controls
Hygiene measures
Avoid contact with skin.
Hand protection:
Eye protection:
chemical-resistant gloves
Observe the information of the glove manufacturers on
permeability and breakthrough times and other workplace
requirements
safety glasses
9. Physical and chemical properties
Form:
Colour:
Odour:
Melting point:
Boiling point:
Flash point:
Relative density:
pH value:
liquid
Pink
none
not applicable
not applicable
not applicable
no data
Approx. 6
Page 2 of 4
Sanit
Revision Date: 1 February 2013
Version: 2
Material Safety Data Sheet in accordance with NOHSC 2011
10. Stability and reactivity
Hazardous reactions
When handled and stored appropriately no dangerous reactions are known
Hazardous decomposition products
When used and handled as intended, none.
11. Toxicological information
Acute oral toxicity:
Irritant effect on skin:
Irritant effect on eyes:
LD50 > 5000 mg/kg
Mild irritant
Mild irritant
12. Ecological information
Fish toxicity:
Harmful to aquatic life.
Remarks
Avoid unintentional release to the environment.
13. Disposal considerations
Product
Dispose of in accordance with local authority regulations
Uncleaned packaging
Consider recycling.
14. Transport information
Land: ADG
Air: IATA
Sea: IMDG
Not restricted
Not restricted
Not restricted
15. Regulatory information
Poison Schedule (SUSDP): None allocated
National Chemical Inventories
AICS: All components listed on the Australian Inventory of Chemical Substances (AICS)
NZIoC: All hazardous components listed on the New Zealand Inventory of Chemical substances (NZIoC)
16. Other information
Page 3 of 4
Sanit
Revision Date: 1 February 2013
Version: 2
Material Safety Data Sheet in accordance with NOHSC 2011
This MSDS is a summary of our best knowledge of the health and safety hazard information of the
product and how to safely handle and use the product in the workplace. Each user should read this
MSDS and consider the information in the context of how the product will be handled and used in the
workplace, including in conjunction with other products.
If clarification or further information is needed to ensure that an appropriate risk assessment can be
made, the user should contact this company.
Our responsibility for products sold is subject to our standard terms and conditions, a copy of which is
sent to our customers and is also available on request.
Since the actual use of this product is beyond our control, we make no warranty, expressed or implied,
concerning the use of this product. It is the responsibility of users to ascertain that
the product is suitable for intended applications.
Page 4 of 4