LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 1 02.17.14 Hi-lume® A-Series Driver Overview PPLT00258 (LTEA4U1UKN-FA100) Forward-Phase Control Hi-lume® A-Series Driver is a high-performance LED driver that provides smooth, continuous 1% dimming for virtually any LED fixture, whether it requires constant-current or constant-voltage. It is the most versatile LED driver offered today due to its compatibility with a wide variety of LED arrays, multiple form factors, and numerous control options. Features •Continuous, flicker-free dimming from 100% to 1%. •Guaranteed compatibility with selected Maestro Wireless®, RadioRA® 2, HomeWorks® QS, GRAFIK Eye® QS, GRAFIK Systems™, Quantum®, and Stanza® dimmers. Please see chart at the end of this document or contact Lutron for details regarding compatible controls. Hi-lume® A-Series, case type K 3.00 in (76 mm) W x 1.00 in (25 mm) H x 4.90 in (124 mm) L •100% performance tested at factory. •100% burned in at factory. •A rated lifetime of 50,000 hours @ t c =149 °F (65 °C). •UL recognized for United States and Canada. •FCC Part 15 compliant for commercial and residential applications at 120 V ~. •Pulse width modulation (PWM) or constant-current reduction (CCR) dimming methods available. See Application Note #360 for details. Hi-lume® A-Series, case type M 1.18 in (30 mm) W x 1.00 in (25 mm) H x 14.25 in (362 mm) L •RoHS Compliant •For more information please go to: www.lutron.com/HilumeLED ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 2 02.17.14 Specifications Performance •UL 8750 recognized. •Dimming Range: 100% to 1% •Class 2 output available. •Operating Voltage: 120 V ~ at 50/60 Hz (Forward Phase Control) •Models available to meet LED Driver requirements for Energy Star 1.1. •A rated lifetime of 50,000 hours @ t c = 149 °F (65 °C). Contact Lutron for derating information. •Patented thermal foldback protection •LEDs turn on to any dimmed level without going to full brightness. •Nonvolatile memory restores all driver settings after power failure. •Power Factor: > 0.90 at 40 W •Total Harmonic Distortion (THD): < 20% at 40 W •Inrush Current: < 2 A •Inrush Current Limiting Circuitry: eliminates circuit breaker tripping, switch arcing and relay failure. Driver Wiring & Mounting •Driver is grounded by a mounting screw to the grounded fixture (or by terminal connection on the K case). •Terminal blocks on the driver accept one solid wire per terminal from 18 AWG to 16 AWG (0.75 mm( to 1.5 mm(). •Fixture must be grounded in accordance with local and national electrical codes. •Maximum driver-to-LED light engine wire length for Constant-Current Drivers: Maximum Lead Length •Open circuit protected •Short circuit protected •Turn-on time: ≤ 1 second •PWM Dimming Frequency: 550 Hz Wire Gauge 200 mA to 700 mA 710 mA to 1.50 A 1.51 A to 2.10 A 18 AWG (0.75 mm2) 30 ft (9 m) 15 ft (4.5 m) 10 ft (3 m) 16 AWG (1.5 mm2) 35 ft (10.5 m) 25 ft (7.5 m) 15 ft (4.5 m) 14 AWG (2.5 mm ) 50 ft (15 m) 40 ft (12 m) 25 ft (7.5 m) 12 AWG (4.0 mm2) 100 ft (30 m) 60 ft (18 m) 40 ft (12 m) 2 Environmental •Sound Rating: Class A. •Relative Humidity: Maximum 90% non-condensing. •Minimum operating ambient temperature (t a) = 32 °F (0 °C). •Maximum driver-to-LED light engine wire length for Constant-Voltage Drivers: Maximum Lead Length Wire Gauge 10 to 20 V- 20.5 to 40 V- 40.5 to 60 V- 18 AWG (0.75 mm ) 10 ft (3 m) 15 ft (4.5 m) 30 ft (9 m) 16 AWG (1.5 mm2) 15 ft (4.5 m) 25 ft (7.5 m) 50 ft (15 m) 14 AWG (2.5 mm2) 25 ft (7.5 m) 40 ft (12 m) 75 ft (22.5 m) 12 AWG (4.0 mm ) 40 ft (12 m) 60 ft (18 m) 100 ft (30 m) 2 Standards •Meets ANSI C62.41 category A surge protection standards up to and including 4 kV. 2 •FCC Part 15 compliant for commercial and residential applications. •Manufacturing facilities employ ESD reduction practices that comply with the requirements of ANSI/ESD S20.20. •Lutron® Quality Systems registered to ISO 9001.2008. ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 3 02.17.14 PPLT00258 (LTEA4U1UKN-HV050) How to Build a Model Number: Hi-lume ® A-Series LTE A 4U1U _ _ - _ _ _ _ _ Case Size: example: LTEA4U1UKS-HC070 For further assistance selecting your model number, contact our LED Center of Excellence at 1.877.346.5338 or LEDs@lutron.com K = Compact M = Stick Current Level (for Constant-Current): 050 = 500mA 020 = 0.20 A; 021 = 0.21 A…070 = 0.70 A…210 = 2.10 A Voltage Level (for Constant-Voltage): 100 = 10.0 V; 105 = 10.5 V…600 = 60.0 V Case Style: S = Studded (K case only) N = Non-Studded Driver Output: C = Constant-current driver with pulse width modulation (PWM) dimming A = Constant-current driver with constant-current reduction (CCR) dimming V = Constant-voltage driver with pulse width modulation (PWM) dimming LED Load Output Range (see the following pages for more detail): Class 2 Constant-Voltage Class 2 Constant-Current A = 10.0 V–12.0 V E = 0.20 A–0.50 A 30 V–54 V Isolated Non-Class 2 Constant-Current B = 12.5 V–20.0 V F = 0.51 A–1.00 A 30 V–54 V Y = 0.20 A–0.50 A 30 V–60 V C = 20.5 V–24.0 V G = 0.20 A–0.70 A 8 V–20 V Z = 0.51 A–1.00 A 30 V–60 V D = 24.5 V–38.0 V H = 0.20 A–0.70 A 15 V–38 V I = 0.71 A–1.05 A 8 V–20 V Isolated Non-Class 2 Constant-Voltage J = 0.71 A–1.05 A 15 V–38 V X = 38.5 V–60.0 V L = 1.06 A–1.50 A 15 V–38 V K = 1.06 A–1.50 A 8 V–20 V M = 1.51 A–2.10 A 8 V – 20 V ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 4 02.17.14 “A” Output Range, Voltage Driver Models Driver Type Output Dimming Method Output Voltage Output Current Output Power Constant-Voltage Driver (Class 2) Pulse Width Modulation (PWM) 10.0 – 12.0 V PWM 0.42 – 3.3 A 5 – 40 W Standards Recognition Voltage Driver Operation Range: Output Current vs. Output Voltage Output Current vs. Output Voltage 3.5 3.5 3.3 3.3 Output Power vs. Output Voltage Output Power vs. Output Voltage 40 40 3 3 2 2 Output OutputPower Power(W) (W) Output OutputCurrent Current(A) (A) 2.5 2.5 A A 1.5 1.5 1 1 30 30 25 25 A A 20 20 15 15 10 10 0.5 0.5 0 0 3.3 A Max. 3.3 A Max. 35 35 5 5 5 W Min. 5 W Min. 0 0 10 12 10 12 20 20 30 30 40 40 50 50 0 0 60 60 0 0 Output Voltage (V) Output Voltage (V) 10 12 10 12 20 20 30 30 40 40 50 50 60 60 Output Voltage (V) Output Voltage (V) Typical Performance Specifications: Parameter Value Test Conditions Input Current 400 mA Power Factor 0.98 THD 16% Driver Efficiency 79% t a = 25 °C, 12.0 V 40 W load, Max. Light Output, K enclosure 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V ~ Driver Efficiency vs. Output Power at 120 V ~ 90 90 85 85 Efficiency Efficiency(%) (%) 80 80 12.0 V 10.0 V 12.0 V 10.0 V 75 75 70 70 65 65 60 60 5 5 10 10 15 15 20 20 25 25 30 30 35 35 40 40 Output Power (W) Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 5 02.17.14 “B” Output Range, Voltage Driver Models Driver Type Output Dimming Method Output Voltage Output Current Output Power Constant-Voltage Driver (Class 2) Pulse Width Modulation (PWM) 12.5 – 20.0 V PWM 0.25 – 3.2 A 5 – 40 W Standards Recognition Voltage Driver Operation Range: Output Current vs. Output Voltage Output Current vs. Output Voltage 3.5 3.5 40 40 3 3 40 W Max. 40 W Max. 35 35 Output OutputPower Power(W) (W) 2.5 2.5 Output OutputCurrent Current(A) (A) Output Power vs. Output Voltage Output Power vs. Output Voltage 2 2 1.5 1.5 B B 1 1 25 25 B B 20 20 15 15 10 10 0.5 0.5 0 0 30 30 5 5 5 W Min. 5 W Min. 0 0 10 12.5 10 12.5 20 20 30 30 40 40 50 50 0 0 60 60 0 0 Output Voltage (V) Output Voltage (V) 10 12.5 10 12.5 20 20 30 30 40 40 50 50 60 60 Output Voltage (V) Output Voltage (V) Typical Performance Specifications: Parameter Value Test Conditions Input Current 400 mA Power Factor 0.99 THD 9% Driver Efficiency 83% t a = 25 °C, 20.0 V 40 W load, Max. Light Output, K enclosure 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V ~ Driver Efficiency vs. Output Power at 120 V ~ 90 90 85 85 20.0 V 20.0 V 18.0 V 18.0 V Efficiency Efficiency(%) (%) 80 80 12.5 V 12.5 V 75 75 70 70 65 65 60 60 5 5 10 10 15 15 20 20 25 25 30 30 35 35 40 40 Output Power (W) Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 6 02.17.14 “C” Output Range, Voltage Driver Models Driver Type Output Dimming Method Output Voltage Output Current Output Power Constant-Voltage Driver (Class 2) Pulse Width Modulation (PWM) 20.5 – 24.0 V PWM 1.95 – 0.21 A 5 – 40 W Standards Recognition Voltage Driver Operation Range: Output Current vs. Output Voltage Output Current vs. Output Voltage 3.5 3.5 Output Power vs. Output Voltage Output Power vs. Output Voltage 40 40 3 3 35 35 40 W Max. 40 W Max. Output OutputPower Power(W) (W) Output OutputCurrent Current(A) (A) 2.5 2.5 2 2 1.5 1.5 C C 1 1 25 25 C C 20 20 15 15 10 10 0.5 0.5 0 0 30 30 5 5 5 W Min. 5 W Min. 0 0 20.5 24 20.5 24 10 10 30 30 40 40 50 50 0 0 60 60 0 0 Output Voltage (V) Output Voltage (V) 10 10 20.5 24 20.5 24 30 30 40 40 50 50 60 60 Output Voltage (V) Output Voltage (V) Typical Performance Specifications: Parameter Value Test Conditions Input Current 380 mA Power Factor 0.99 THD 10% Driver Efficiency 84% t a = 25 °C, 24.0 V 40 W load, Max. Light Output, K enclosure 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V ~ Driver Efficiency vs. Output Power at 120 V ~ 90 90 85 85 24 V 24 V Efficiency Efficiency(%) (%) 80 80 20.5 V 20.5 V 75 75 70 70 65 65 60 60 5 5 10 10 15 15 20 20 25 25 30 30 35 35 40 40 Output Power (W) Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 7 02.17.14 “D” Output Range, Voltage Driver Models Driver Type Output Dimming Method Output Voltage Output Current Output Power Constant-Voltage Driver (Class 2) Pulse Width Modulation (PWM) 24.5 – 38.0 V PWM 0.13 – 1.63 A 5 – 40 W Standards Recognition Voltage Driver Operation Range: Output Current vs. Output Voltage Output Current vs. Output Voltage 3.5 3.5 Output Power vs. Output Voltage Output Power vs. Output Voltage 40 40 3 3 35 35 Output OutputPower Power(W) (W) Output OutputCurrent Current(A) (A) 2.5 2.5 2 2 40 W Max. 40 W Max. 1.5 1.5 1 1 D D 0.5 0.5 0 0 10 10 20 20 25 25 D D 20 20 15 15 10 10 5 5 5 W Min. 5 W Min. 0 0 30 30 24.5 24.5 30 30 38 40 38 40 50 50 0 0 60 60 0 0 Output Voltage (V) Output Voltage (V) 10 10 20 20 24.5 24.5 30 30 38 40 38 40 50 50 60 60 Output Voltage (V) Output Voltage (V) Typical Performance Specifications: Parameter Value Test Conditions Input Current 380 mA Power Factor 0.99 THD 7% Driver Efficiency 86% t a = 25 °C, 38.0 V 40 W load, Max. Light Output, K enclosure 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V ~ Driver Efficiency vs. Output Power at 120 V ~ 90 90 36 V 36 V 38 V 38 V 85 85 24.5 V 24.5 V Efficiency Efficiency(%) (%) 80 80 75 75 70 70 65 65 60 60 5 5 10 10 15 15 20 20 25 25 30 30 35 35 40 40 Output Power (W) Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 8 02.17.14 “E” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver Constant-Current Reduction (CCR) (Class 2) Output Voltage Output Current Output Power 30 – 54 V- 0.20 – 0.50 A 6 – 27 W Standards Recognition Current Driver Operation Range: Output Power vs. Output Current Output Power vs. Output Current 60 60 40 40 54 54 50 50 35 35 30 30 E E 40 40 Output OutputPower Power(W) (W) Output OutputVoltage Voltage(V)(V) Output Voltage vs. Output Current Output Voltage vs. Output Current 30 30 20 20 20 20 E E 15 15 10 10 10 10 0 0 54 V Max. 54 V Max. 25 25 30 V Min. 30 V Min. 5 5 0 0 0.20 0.35 0.50 0.20 0.35 0.50 0.7 0.7 1.05 1.05 1.4 1.4 0 0 2.1 2.1 0 0 0.20 0.35 0.50 0.20 0.35 0.50 Output Current (A) Output Current (A) 0.7 0.7 1.05 1.05 1.4 1.4 1.75 1.75 2.1 2.1 Output Current (A) Output Current (A) Typical Performance Specifications: Parameter Value Test Conditions Input Current 270 mA Power Factor 0.99 THD 10% Driver Efficiency 83% t a = 25 °C, 0.50 A 27 W load, Max. Light Output, K enclosure 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V ~ Driver Efficiency vs. Output Power at 120 V ~ 90 90 85 85 80 80 Efficiency Efficiency(%) (%) 0.50 A 0.50 A 0.35 A 0.35 A 75 75 0.20 A 0.20 A 70 70 65 65 60 60 6 6 9 9 12 12 15 15 18 18 21 21 24 24 27 27 Output Power (W) Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 9 02.17.14 “F” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver Constant-Current Reduction (CCR) (Class 2) Output Voltage Output Current Output Power 30 – 54 V- 0.51 – 1.00 A 15 – 40 W Standards Recognition Current Driver Operation Range: Output Voltage vs. Output Current Output Voltage vs. Output Current 60 60 40 40 40 W Max. 40 W Max. 54 54 50 50 30 30 F F 40 40 30 30 20 20 F F 25 25 20 20 30 V Min. 30 V Min. 15 15 10 10 10 10 0 0 54 V Max. 54 V Max. 35 35 Output OutputPower Power(W) (W) Output OutputVoltage Voltage(V)(V) Output Power vs. Output Current Output Power vs. Output Current 5 5 0 0 0.51 0.51 0.35 0.35 0.7 0.7 1.00 1.00 1.4 1.4 1.75 1.75 0 0 2.1 2.1 0 0 Output Current (A) Output Current (A) 0.35 0.51 0.35 0.51 0.7 0.7 1.00 1.00 1.4 1.4 1.75 1.75 2.1 2.1 Output Current (A) Output Current (A) Typical Performance Specifications: Parameter Value Test Conditions Input Current 400 mA Power Factor 0.99 THD 7% Driver Efficiency 82% t a = 25 °C, 1.00 A 40 W load, Max. Light Output, K enclosure 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V ~ Driver Efficiency vs. Output Power at 120 V ~ 90 90 85 85 0.70 A 0.70 A Efficiency Efficiency(%) (%) 80 80 1.00 A 1.00 A 0.51 A 0.51 A 75 75 70 70 65 65 60 60 15 15 20 20 25 25 30 30 35 35 40 40 Output Power (W) Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 10 02.17.14 “G” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver Pulse Width Modulation (PWM) (Class 2) Constant-Current Reduction (CCR) Output Voltage Output Current Output Power 8 – 20 V PWM 0.20 – 0.70 A 2 – 14 W Standards Recognition 8 – 20 V- Current Driver Operation Range: Output Voltage vs. Output Current Output Voltage vs. Output Current Output Power vs. Output Current Output Power vs. Output Current 40 40 60 60 35 35 30 30 40 40 Output OutputPower Power(W) (W) Output OutputVoltage Voltage(V)(V) 50 50 30 30 20 20 G G 10 10 8 8 25 25 20 20 20 V Max. 20 V Max. 15 15 10 10 G G 5 5 0 0 0.20 0.20 0.35 0.35 0.7 0.7 1.05 1.05 1.4 1.4 1.75 1.75 0 0 2.1 2.1 8 V Min. 8 V Min. 0 0 0.20 0.35 0.20 0.35 Output Current (A) Output Current (A) 0.7 0.7 1.05 1.05 1.4 1.4 1.75 1.75 2.1 2.1 Output Current (A) Output Current (A) Typical Performance Specifications: Parameter Value Test Conditions Input Current 150 mA Power Factor 0.99 THD 12% Driver Efficiency 76% t a = 25 °C, 0.70 A 14 W load, Max. Light Output, K enclosure 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V ~ Driver Efficiency vs. Output Power at 120 V ~ 80 80 0.70 A 0.70 A 75 75 0.50 A 0.50 A Efficiency Efficiency(%) (%) 70 70 0.35 A 0.35 A 65 65 0.20 A 0.20 A 60 60 55 55 50 50 45 45 2 2 4 4 6 6 8 8 10 10 12 12 14 14 Output Power (W) Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 11 02.17.14 “H” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver Pulse Width Modulation (PWM) (Class 2) Constant-Current Reduction (CCR) Output Voltage Output Current Output Power 15 – 38 V PWM 0.20 – 0.70 A 3 – 26 W Standards Recognition 15 – 38 V- Current Driver Operation Range: Output Voltage vs. Output Current Output Voltage vs. Output Current Output Power vs. Output Current Output Power vs. Output Current 40 40 60 60 35 35 30 30 40 40 38 38 30 30 Output OutputPower Power(W) (W) Output OutputVoltage Voltage(V)(V) 50 50 H H 20 20 15 15 10 10 0 0 25 25 38 V Max. 38 V Max. 20 20 15 15 H H 10 10 5 5 0 0 0.20 0.20 0.35 0.35 0.7 0.7 1.05 1.05 1.4 1.4 1.75 1.75 2.1 2.1 0 0 15 V Min. 15 V Min. 0 0 0.20 0.20 Output Current (A) Output Current (A) 0.35 0.35 0.7 0.7 1.05 1.05 1.4 1.4 1.75 1.75 2.1 2.1 Output Current (A) Output Current (A) Typical Performance Specifications: Parameter Value Test Conditions Input Current 270 mA Power Factor 0.99 THD 8% Driver Efficiency 83% t a = 25 °C, 0.70 A 26 W load, Max. Light Output, K enclosure 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V ~ Driver Efficiency vs. Output Power at 120 V ~ 90 90 85 85 Efficiency Efficiency(%) (%) 0.70 A 0.70 A 0.50 A 0.50 A 80 80 0.35 A 0.35 A 75 75 70 70 0.20 A 0.20 A 65 65 60 60 3 3 8 8 13 13 18 18 23 23 Output Power (W) Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 12 02.17.14 “I” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver Pulse Width Modulation (PWM) (Class 2) Constant-Current Reduction (CCR) Output Voltage Output Current Output Power 8 – 20 V PWM 0.71 – 1.05 A 6 – 21 W Standards Recognition 8 – 20 V- Current Driver Operation Range: Output Voltage vs. Output Current Output Voltage vs. Output Current Output Power vs. Output Current Output Power vs. Output Current 40 40 60 60 35 35 30 30 40 40 Output OutputPower Power(W) (W) Output OutputVoltage Voltage(V)(V) 50 50 30 30 20 20 II 10 10 8 8 0 0 20 V Max. 20 V Max. 25 25 20 20 15 15 II 10 10 5 5 0 0 0.35 0.35 0.71 0.71 1.05 1.05 1.4 1.4 1.75 1.75 0 0 2.1 2.1 8 V Min. 8 V Min. 0 0 0.20 0.35 0.20 0.35 Output Current (A) Output Current (A) 0.7 0.7 1.05 1.05 1.4 1.4 1.75 1.75 2.1 2.1 Output Current (A) Output Current (A) Typical Performance Specifications: Parameter Value Test Conditions Input Current 220 mA Power Factor 0.99 THD 11% Driver Efficiency 79% t a = 25 °C, 1.05 A 21 W load, Max. Light Output, K enclosure 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V ~ Driver Efficiency vs. Output Power at 120 V ~ 90 90 85 85 Efficiency Efficiency(%) (%) 80 80 1.05 A 1.05 A 0.71 A 0.71 A 75 75 70 70 65 65 60 60 6 6 9 9 12 12 15 15 18 18 21 21 Output Power (W) Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 13 02.17.14 “J” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver Pulse Width Modulation (PWM) (Class 2) Constant-Current Reduction (CCR) Output Voltage Output Current Output Power 15 – 38 V PWM 0.71 – 1.05 A 11 – 40 W Standards Recognition 15 – 38 V- Current Driver Operation Range: Output Voltage vs. Output Current Output Voltage vs. Output Current Output Power vs. Output Current Output Power vs. Output Current 40 40 60 60 30 30 40 40 38 38 30 30 Output OutputPower Power(W) (W) Output OutputVoltage Voltage(V)(V) 50 50 J J 20 20 15 15 10 10 0 0 38 V Max. 38 V Max. 35 35 25 25 J J 20 20 15 15 10 10 5 5 0 0 0.71 0.71 0.35 0.35 1.05 1.05 1.4 1.4 1.75 1.75 0 0 2.1 2.1 15 V Min. 15 V Min. 0 0 Output Current (A) Output Current (A) 0.35 0.35 0.71 0.71 1.05 1.05 1.4 1.4 1.75 1.75 2.1 2.1 Output Current (A) Output Current (A) Typical Performance Specifications: Parameter Value Test Conditions Input Current 400 mA Power Factor 0.99 THD 7% Driver Efficiency 84% t a = 25 °C, 1.05 A 40 W load, Max. Light Output, K enclosure 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V ~ Driver Efficiency vs. Output Power at 120 V ~ 90 90 85 85 Efficiency Efficiency(%) (%) 80 80 1.05 A 1.05 A 75 75 0.71 A 0.71 A 70 70 65 65 60 60 10 10 15 15 20 20 25 25 30 30 35 35 40 40 Output Power (W) Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 14 02.17.14 “K” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver Pulse Width Modulation (PWM) (Class 2) Constant-Current Reduction (CCR) Output Voltage Output Current Output Power 8 – 20 V PWM 1.06 – 1.50 A 9 – 30 W Standards Recognition 8 – 20 V- Current Driver Operation Range: Output Voltage vs. Output Current Output Voltage vs. Output Current Output Power vs. Output Current Output Power vs. Output Current 40 40 60 60 35 35 40 40 30 30 20 20 K K 10 10 8 8 0 0 20 V Max. 20 V Max. 30 30 Output OutputPower Power(W) (W) Output OutputVoltage Voltage(V)(V) 50 50 25 25 20 20 K K 15 15 10 10 8 V Min. 8 V Min. 5 5 0 0 0.7 0.7 0.35 0.35 1.06 1.06 1.4 1.5 1.4 1.5 1.75 1.75 2.1 2.1 0 0 0 0 Output Current (A) Output Current (A) 0.35 0.35 0.7 0.7 1.05 1.05 1.4 1.5 1.4 1.5 1.75 1.75 2.1 2.1 Output Current (A) Output Current (A) Typical Performance Specifications: Parameter Value Test Conditions Input Current 320 mA Power Factor 0.99 THD 12% Driver Efficiency 79% t a = 25 °C, 1.50 A 30 W load, Max. Light Output, K enclosure 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V ~ Driver Efficiency vs. Output Power at 120 V ~ 90 90 85 85 1.20 A 1.20 A Efficiency Efficiency(%) (%) 80 80 1.50 A 1.50 A 1.06 A 1.06 A 75 75 70 70 65 65 60 60 9 9 11 11 13 13 15 15 17 17 19 19 21 21 23 23 25 25 27 27 29 29 Output Power (W) Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 15 02.17.14 “L” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver Pulse Width Modulation (PWM) (Class 2) Constant-Current Reduction (CCR) Output Voltage Output Current Output Power 15 – 38 V PWM 1.06 – 1.50 A 16 – 40 W Standards Recognition 15 – 38 V- Current Driver Operation Range: Output Voltage vs. Output Current Output Voltage vs. Output Current Output Power vs. Output Current Output Power vs. Output Current 40 40 60 60 35 35 30 30 40 40 Output OutputPower Power(W) (W) Output OutputVoltage Voltage(V)(V) 50 50 40 W Max. 40 W Max. 30 30 L L 20 20 15 15 10 10 0 0 L L 25 25 20 20 15 V Min. 15 V Min. 15 15 10 10 5 5 0 0 0.7 0.7 0.35 0.35 1.06 1.06 1.4 1.5 1.4 1.5 1.75 1.75 0 0 2.1 2.1 0 0 Output Current (A) Output Current (A) 0.35 0.35 0.7 0.7 1.05 1.05 1.4 1.5 1.4 1.5 1.75 1.75 2.1 2.1 Output Current (A) Output Current (A) Typical Performance Specifications: Parameter Value Test Conditions Input Current 400 mA Power Factor 0.99 THD 9% Driver Efficiency 82% t a = 25 °C, 1.50 A 40 W load, Max. Light Output, K enclosure 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V ~ Driver Efficiency vs. Output Power at 120 V ~ 90 90 85 85 Efficiency Efficiency(%) (%) 80 80 1.20 A 1.20 A 1.06 A 75 1.06 A 75 1.50 A 1.50 A 70 70 65 65 60 60 16 16 19 19 22 22 25 25 28 28 31 31 34 34 37 37 40 40 Output Power (W) Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 16 02.17.14 “M” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver Pulse Width Modulation (PWM) (Class 2) Constant-Current Reduction (CCR) Output Voltage Output Current Output Power 8 – 19.9 V PWM 1.51 – 2.10 A 12 – 30 W Standards Recognition 8 – 19.9 V- Current Driver Operation Range: Output Voltage vs. Output Current Output Voltage vs. Output Current Output Power vs. Output Current Output Power vs. Output Current 40 40 60 60 35 35 30 30 40 40 30 30 Output OutputPower Power(W) (W) Output OutputVoltage Voltage(V)(V) 50 50 30 W Max. 30 W Max. 20 20 0 0 0 0 0.35 0.35 0.7 0.7 1.05 1.05 1.4 1.51 1.4 1.51 M M 20 20 15 15 10 10 M M 10 10 8 8 25 25 8 V Min. 8 V Min. 5 5 1.75 1.75 0 0 2.1 2.1 0 0 Output Current (A) Output Current (A) 0.35 0.35 0.7 0.7 1.05 1.05 1.4 1.51 1.4 1.51 1.75 1.75 2.1 2.1 Output Current (A) Output Current (A) Typical Performance Specifications: Parameter Value Test Conditions Input Current 310 mA Power Factor 0.99 THD 14% Driver Efficiency 76% t a = 25 °C, 2.10 A 30 W load, Max. Light Output, K enclosure 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V ~ Driver Efficiency vs. Output Power at 120 V ~ 90 90 85 85 Efficiency Efficiency(%) (%) 80 80 75 75 70 70 1.51 A 1.51 A 1.75 A 1.75 A 2.10 A 2.10 A 65 65 60 60 12 12 14 14 16 16 18 18 20 20 22 22 24 24 26 26 28 28 30 30 Output Power (W) Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 17 02.17.14 “X” Output Range, Voltage Driver Models Driver Type Output Dimming Method Output Voltage Output Current Output Power Constant-Voltage Driver (Isolated, Non-Class 2) Pulse Width Modulation (PWM) 38.5 – 60.0 V PWM 0.08 – 1.04 A 5 – 40 W Standards Recognition Voltage Driver Operation Range: Output Current vs. Output Voltage Output Current vs. Output Voltage 3.5 3.5 Output Power vs. Output Voltage Output Power vs. Output Voltage 40 40 35 35 2.5 2.5 30 30 Output OutputPower Power(W) (W) Output OutputCurrent Current(A) (A) 3 3 2 2 1.5 1.5 40 W Max. 40 W Max. 1 1 X X 20 20 15 15 10 10 0.5 0.5 0 0 25 25 5 W Min. 5 W Min. 0 0 10 10 20 20 30 30 5 5 X X 38.5 40 38.5 40 50 50 0 0 60 60 0 0 10 10 20 20 30 30 38.5 40 38.5 40 50 50 60 60 Output Voltage (V) Output Voltage (V) Output Voltage (V) Output Voltage (V) Typical Performance Specifications: Parameter Value Test Conditions Input Current 390 mA Power Factor 0.99 THD 10% Driver Efficiency 86% t a = 25 °C, 60.0 V 40 W load, Max. Light Output, K enclosure 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V ~ Driver Efficiency vs. Output Power at 120 V ~ 90 90 85 85 38.5 V 38.5 V 60.0 V 60.0 V Efficiency Efficiency(%) (%) 80 80 48.0 V 48.0 V 75 75 70 70 65 65 60 60 5 5 10 10 15 15 20 20 25 25 30 30 35 35 40 40 Output Power (W) Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 18 02.17.14 “Y” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver Pulse Width Modulation (PWM) (Isolated, Non-Class 2) Constant-Current Reduction (CCR) Output Voltage Output Current Output Power 30 – 60 V PWM 0.20 – 0.50 A 6 – 30 W Standards Recognition 30 – 60 V- Current Driver Operation Range: Output Voltage vs. Output Current Output Voltage vs. Output Current Output Power vs. Output Current Output Power vs. Output Current 40 40 60 60 35 35 30 30 Y Y 40 40 Output OutputPower Power(W) (W) Output OutputVoltage Voltage(V)(V) 50 50 30 30 20 20 20 20 Y Y 15 15 10 10 10 10 0 0 60 V Max. 60 V Max. 25 25 30 V Min. 30 V Min. 5 5 0 0 0 0 0.20 0.20 0.35 0.50 0.35 0.50 0.7 0.7 1.05 1.05 1.4 1.4 1.75 1.75 2.1 2.1 0 0 0.20 0.20 Output Current (A) Output Current (A) 0.35 0.50 0.35 0.50 0.7 0.7 1.05 1.05 1.4 1.4 1.75 1.75 2.1 2.1 Output Current (A) Output Current (A) Typical Performance Specifications: Parameter Value Test Conditions Input Current 300 mA Power Factor 0.99 THD 11% Driver Efficiency 84% t a = 25 °C, 0.50 A 30 W load, Max. Light Output, K enclosure 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V ~ Driver Efficiency vs. Output Power at 120 V ~ 90 90 85 85 0.50 A 0.50 A Efficiency Efficiency(%) (%) 80 80 0.35 A 0.35 A 75 75 0.20 A 0.20 A 70 70 65 65 60 60 6 6 9 9 12 12 15 15 18 18 21 21 24 24 27 27 30 30 Output Power (W) Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 19 02.17.14 “Z” Output Range, Current Driver Models Driver Type Output Dimming Method Constant-Current Driver Pulse Width Modulation (PWM) (Isolated, Non-Class 2) Constant-Current Reduction (CCR) Output Voltage Output Current Output Power 30 – 60 V PWM 0.51 – 1.00 A 16 – 40 W Standards Recognition 30 – 60 V- Current Driver Operation Range: Output Voltage vs. Output Current Output Voltage vs. Output Current 60 60 Output Power vs. Output Current Output Power vs. Output Current 40 40 40 W Max. 40 W Max. 30 30 20 20 25 25 30 V Min. 30 V Min. 20 20 15 15 10 10 10 10 0 0 Z Z 30 30 Z Z Output OutputPower Power(W) (W) Output OutputVoltage Voltage(V)(V) 50 50 40 40 60 V Max. 60 V Max. 35 35 5 5 0 0 0.35 0.51 0.35 0.51 0.7 0.7 1.00 1.00 1.4 1.4 1.75 1.75 0 0 2.1 2.1 0 0 Output Current (A) Output Current (A) 0.35 0.51 0.35 0.51 0.7 0.7 1.00 1.00 1.4 1.4 1.75 1.75 2.1 2.1 Output Current (A) Output Current (A) Typical Performance Specifications: Parameter Value Test Conditions Input Current 400 mA Power Factor 0.99 THD 8% Driver Efficiency 83% t a = 25 °C, 1.00 A 40 W load, Max. Light Output, K enclosure 120 V~ without a dimmer Driver Efficiency vs. Output Power at 120 V ~ Driver Efficiency vs. Output Power at 120 V ~ 90 90 85 85 Efficiency Efficiency(%) (%) 0.70 A 0.70 A 0.51 A 0.51 A 80 80 1.00 A 1.00 A 75 75 70 70 65 65 60 60 15 15 20 20 25 25 30 30 35 35 40 40 Output Power (W) Output Power (W) ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 20 02.17.14 K Case: Case Dimensions C J* A I* H* B E D F G K Case: Connector Location Dimensions K* L O P K* Q 8-32 Threaded Studs* L M N Q A B C D E 4.20 in (107 mm) 1.00 in (25 mm) 3.00 in (76 mm) 4.90 in (124 mm) 4.60 in (117 mm) (mounting center) F G H* I* J* 1.42 in (36 mm) 1.99 in (51 mm) 1.11 in (28 mm) 2.00 in (51 mm) 1.60 in (41 mm) R* K* L M N O 0.33 in (8.3 mm) 0.65 in (16.5 mm) 0.75 in (19 mm) 1.73 in (44 mm) 1.33 in (34 mm) P 0.74 in (19 mm) Q 0.32 in (8 mm) R* 0.29 in (7 mm) * Applies to studded K case only. ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 21 02.17.14 K Case: Side Entry Connector Location Dimensions (Non-Studded) S U T S T U V 1.38 in (35 mm) 0.64 in (16 mm) 0.88 in (22 mm) 1.53 in (39 mm) V M Case: Case Dimensions C B A A B C D 14.125 in (359 mm) 13.68 in (347 mm) (mounting center) 1.18 in (30 mm) 1.00 in (25 mm) D ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 22 02.17.14 Wiring Controls Requiring Neutral Note: Colors shown correspond to terminals on driver. Wiring Diagram LutronR Neutral-wire Forward Phase Dimmer Hot Dimmed Hot (Black) +V (Red)2 Hi-lume ® A-Series LED Dimming Driver Neutral Ground1 Neutral LED Light Engine Neutral (White) Ground (Green)1 –V (Black)2 Ground1 Ground wire connection available on K case models only. Fixture and driver case must be grounded in accordance with local and national electrical codes. 2 For maximum driver-to-LED light engine wire length, see charts in Driver and Mounting section. 1 Compatible Controls: Lutron® Neutral-wire Dimmers Guaranteed performance specifications with the controls listed in the chart below. For assistance selecting controls, contact our LED Center of Excellence at 1.877.346.5338 or LEDs@lutron.com Product Part Number Low-End Setting/Load-Type Setting* A A: Not Ganged B B B C Drivers per Control B: End of Gang C: Middle of Gang Maestro MRF2Wireless® dimmer 6ND-120- Trim low-end per Advanced Programming Mode App Note (Lutron® P/N 048370) 1 – 8 1 – 8 1 – 8 RadioRA® 2 adaptive dimmer RRD-6NA- Hi-lume® A-Series LTE LED Driver 2-Wire 1 – 8 1 – 8 1 – 8 HomeWorks® QS adaptive dimmer HQRD-6NA- LED Lutron® A-Series 2-Wire 1 – 8 1 – 8 1 – 8 HomeWorks® QS 600 W dimmer HQRD-6ND- LED Lutron® A-Series 2-Wire 1 – 8 1 – 8 1 – 8 Stanza® dimmer SZ-6ND- Trim low-end per Dimmer Installation Guide 1 – 8 1 – 8 1 – 8 RadioRA® 2 1000 W dimmer RRD-10ND- Set Device type to “INC/MLV Neutral Dimmer”; Set High-End Trim to 99%; Set Low-End Trim to 35% 1 – 13 1 – 13 1 – 13 HomeWorks® QS 1000 W dimmer HQRD-10ND- LED Lutron® A-Series 2-Wire 1 – 13 1 – 13 1 – 13 * Setting the low-end trim and load type is necessary to ensure optimal performance and 1% dimming capability. Note: For information about Legacy Product use in existing control application, contact LEDs@lutron.com ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: B Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b 23 02.17.14 Wiring (continued) Controls Requiring Neutral (continued) Note: Colors shown correspond to terminals on driver. Wiring Diagram LutronR Dimming Module/Panel Hot Dimmed Hot (Black) +V (Red)2 Hi-lume ® A-Series LED Dimming Driver Neutral (White) Ground1 Neutral Neutral Ground (Green)1 LED Light Engine –V (Black)2 Ground1 Enclosure must be grounded in accordance with local and national electrical codes. Ground provided by grounding of junction box or by using the green ground wire connection. 2 For maximum driver-to-LED light engine wire length, see charts in Driver Wiring and Mounting section. 1 Compatible Controls: Lutron® Dimming Modules/Panels Guaranteed performance specifications with the controls listed in the chart below. For assistance selecting controls, contact our LED Center of Excellence at 1.877.346.5338 or LEDs@lutron.com Product Part Number Drivers per Control Low-End Setting/Load-Type Setting* HomeWorks® QS wallbox power module HQRJ-WPM-6D-120- 1 – 10 (per output); 26 total per module LED Lutron® A-Series 2-Wire GRAFIK Eye® QS control unit QSGR-, QSGRJ- 1 – 10 (per output); 26 total per unit HomeWorks® wallbox power module HWI-WPM-6D-120 1 – 10 (per output); 26 total per module GRAFIK Eye® 3000 control unit GRX-3100-, GRX-3500- 1 – 10 (per output); 26 total per unit RPM-4U module (LCP, HomeWorks® QS, HW-RPM-4U-120, GRAFIK SystemsTM, Quantum®) LP-RPM-4U-120 1 – 26 (per output); 26 total per module Set load type to “Fluorescent Module” Set load type to “GRX‑FDBI or GRX-TVI” LED Lutron® A-Series 2-Wire Set load type to “2-1” RPM-4A module (LCP, HomeWorks® QS, HW-RPM-4A-120, GRAFIK SystemsTM, Quantum®) LP-RPM-4A-120 1 – 13 (per output); 26 total per module LED Lutron® A-Series 2-Wire Set load type to “2-1” GP dimming panels Various 1 – 26 Set load type to “2-1” * Setting the low-end trim and load type is necessary to ensure optimal performance and 1% dimming capability. ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page LED Dimming Driver Hi-lume® A-Series LTE Architectural Dimming 369543b ELECTRICIANS AND CONTRACTORS FACILITIES MANAGERS Driver Leads SERVICE Maximum driver-to-LED light engine wire length for Constant-Current Drivers: Maximum Lead Length 200 mA to 700 mA 710 mA to 1.50 A 1.51 A to 2.10 A 18 AWG (0.75 mm2) 30 ft (9 m) 15 ft (4.5 m) 10 ft (3 m) 16 AWG (1.5 mm ) 35 ft (10.5 m) 25 ft (7.5 m) 15 ft (4.5 m) 14 AWG (2.5 mm2) 50 ft (15 m) 40 ft (12 m) 25 ft (7.5 m) 12 AWG (4.0 mm2) 100 ft (30 m) 60 ft (18 m) 40 ft (12 m) Wire Gauge 2 Maximum driver-to-LED light engine wire length for Constant-Voltage Drivers: Maximum Lead Length Wire Gauge 10 to 20 V- 20.5 to 40 V- 40.5 to 60 V- 18 AWG (0.75 mm2) 10 ft (3 m) 15 ft (4.5 m) 30 ft (9 m) 16 AWG (1.5 mm ) 15 ft (4.5 m) 25 ft (7.5 m) 50 ft (15 m) 14 AWG (2.5 mm2) 25 ft (7.5 m) 40 ft (12 m) 75 ft (22.5 m) 12 AWG (4.0 mm ) 40 ft (12 m) 60 ft (18 m) 100 ft (30 m) 2 2 24 02.17.14 Warranty For warranty information, please visit http://www.lutron.com/BallastDriverWarranty.pdf Replacement Parts When ordering Lutron® replacement parts please provide the full model number. Consult Lutron if you have any questions. Further Information For further information, please visit us at www.lutron.com/hilumeLED or contact our LED Control Center of Excellence at 1.877.346.5338 or LEDs@lutron.com Wiring and Grounding Driver and lighting fixture must be grounded. Drivers must be installed per national and local electrical codes. LED Load Replacement For Class 2 rated drivers, the LED load can be changed while the driver is installed and powered. Maximum Driver Operating Temperature Driver case temperature (t c ) must not exceed UL conditions of acceptability in end product. For 50,000 hour lifetime, driver case temperature (t c ) must not exceed 65 °C. ® Job Name: Job Number: S P E C I F I C AT I O N S U B M I T TA L Model Numbers: Page