dl61ZCR [LEDX]
dl61zCR [LEDX]
recessed LED downlighT (IC, NON-IC, REMODEL)
Round FIXED CLEAR SPECULAR WIDE APERTURE
TRIM
* In certain conditions where lower than standard wattages are required, A LED
Remote phosphor dimmable LED module in aluminum and glass casing
shallower recess depth may be available. Consult factory for details.
BSpecial Features
Die-cast, tapered wide aperture with
clear specular finish for increased efficiency; deeply regressed light source
CEffects Devices
Soft focus lens included; adjustable yoke allows secure placement of up to 2 effects devices; (add .16” to fixture height
with use of each effects device)
DTrim Plate
Thickness measures 0.055”; install as zero-sightline or flange overlay
ERetention
Engineered torsion spring clips designed to bear 3 times fixture weight; accommodates varying ceiling
thicknesses and ensure snug fit of trim
against ceiling
5.75" *
146mm
A
E
C
D
2.38"
60mm
B
3.95" 100mm
Technical
CONSTRUCTION
Steel and aluminum; extruded aluminum heat-sink; painted finishes
are granulated powder coat; optional chrome and plated finishes.
LED
Xicato LED module available in configurations of 80+ CRI: 700,
1000 and 1300 lumen packages, and 95+ CRI: 500, 700 and 1000 lumen packages. Available color temperatures are 2700K
(+/- 40K), 3000K (+/- 50K), 3500K (+/- 60K) and 4000K (+/- 70K),
with beam angles of 40° and 60°. Average rated lamp life of
50,000 hours. LED/ heat-sink module field replaceable.
80+ CRI Source lm/w
95+ CRI Source lm/w
700 lm
1000 lm
1300 lm
500 lm
700 lm
1000 lm
89 lm/w
82 lm/w
73 lm/w
57 lm/w
54 lm/w
46 lm/w
EMERGENCY LIGHTING
Remote emergency batteries available. Consult factory for information.
led DISTINGUISHING FEATURES
DIMMING PROTOCOL
Analog 0-10 and Triac dim to nominal 10% lm output;
Lutron dims to nominal 1% lm output. Consult factory on
availability of EldoLED systems that dim to nominal 1/10
of 1%, or for guidance on particular systems such as Dali.
listing
ETL/ C-ETL listed for dry/damp locations; IP20 rated.
warranty
Five year warranty on LED lamp module and driver.
One year warranty on all other Lucifer Lighting
provided system components. Consult website for full
warranty terms and conditions.
FIXTURE DISTINGUISHING FEATURES
Construction
Die-cast aluminum baffle
Finishes
Granulated powder coat, platings or
treated metals
Aperture
Deeply regressed light source and
clear specular finish
Color Consistency
1x2 SDCM
Phosphor Architecture
Remote Phosphor
Standard Series 80+ CRI
R9=16, R13= 81 ,R15=75
Artist Series 95+ CRI
R9=98, R13=98, R15=98
Cut-Off Angle Minimum 30° to light source
Construction
Aluminum & Glass; IP66 (module)
Light Tuning
Accepts up to 2 effects devices
page 1
luciferlighting.com
[112613]
©2013 Lucifer Lighting Company
As part of its policy of continuous research and product
development, the company reserves the right to change
or withdraw specifications without prior notice.
3750 IH35 North
San Antonio, Texas 78219
[ PH] +1-210-227-7329
[FAX] +1-210-227-4967
HOUSING AND MOUNTING
dl61zcr [LEDX]
Do not install in environments where ambient temperatures exceed 40­­°C. Transformer compartment and all splice connections may be serviced from room side. Hanger bars included with housings and mounting trays.
NON-IC MOUNTING TRAY
• For non-IC ceilings
• Metal conduit protected wiring and quick-
connect conduit plug between fixture and power supply on tray/ junction box assembly
• Hanger bars may be fitted to short or long side of tray and may be field cut/ narrowed
• Minimum 1/2” (13mm) setback from combus-
tible materials on all sides and top of tray and downlight fixture assembly
• Minimum 3” (76mm) setback from insulation material having max R-Value of 30 on all sides and top of tray and downlight fixture assembly; minimum 6” (152mm) from polycell spray-in foam insulation having max R-Value of 40
IC HOUSINGS (version depends on system configuration)
• For IC, Airtight, CCEA ceilings
• Chicago Plenum & ASTM E283 Airtight rated
• Standard Wattage housing for 8007 or 9505 configurations
• Intermediate Wattage housing for 8010 or 9507 configurations
• Maximum Wattage housing for 8013 or 9510 configurations
• WARNING: Polycell spray-in foam insulation having max R-Value of 40 requires setback of 3” (76mm) from all sides and top of IC housing; NOTE: Consult factory for spacing requirements for any installations exceeding R-Value of 40
STANDARD
WATTAGE
6.1”
(155mm)
Varies
by model
3.26”
(83mm)
10”
(254mm)
4.16” (106mm)
(aperture
centerline)
7.56”
(192mm)
12.25”
(311mm)
TETHERED POWER SUPPLY
• For non-IC or remodel ceilings
• Mounts without conventional housing using ceiling appliqué or collar
• Tethered power supply/ junction box with metal conduit protected wiring and quick-connect plug between fixture and power supply
• Minimum setback from combustible materials of 6.63” (168mm) radius from fixture centerline; minimum 3” (76mm) from surfaces of power supply/ junction box if not situated within above noted radius from fixture centerline
• Minimum 3” (76mm) setback from insulation material having max R-Value of 30 from any surface of downlight fixture assembly; mini mum 6” (152mm) from polycell spray-in foam insulation having max R-Value of 40
7.2” (183mm)
(aperture
centerline)
16.3”
(414mm)
INTERMEDIATE
WATTAGE
7.3”
(186mm)
7.1” (180mm)
(aperture
centerline)
10”
(254mm)
18.4”
(467mm)
MAXIMUM
WATTAGE
9.03”
(229mm)
14”
(356mm)
26.32”
(669mm)
2"
51mm
6.59” 168mm
3.20"
81mm
ZERO-SIGHTLINE
When installed according to manufacturer’s instructions, and ceiling conditions are
met, the fixture is flush with the ceiling plane; appliqué required. (5” / 127mm cutout)
• Mounting trays/ housings use model DLA-APP-Z-RD-3, or optional DLA-APP-Z-RD-5 with thinner profile and smaller diameter for installations where a thinner profile to apply mudding is preferred
• Tethered power supply fixtures use model EDLA-APP-Z-RD
EDLA-APP-Z-RD
DLA-APP-Z-RD-5
DLA-APP-Z-RD-3
Ø 3.36”
85mm
Ø 3.36”
85mm
8.00” / 203mm
3.60” / 91mm
6.50” / 165mm
3.60” / 91mm
Ø 3.36”
85mm
FLANGE OVERLAY
Fixture overlays the ceiling plane.
(3.5” / 89mm cutout)
• Mounting trays and housings accommodate flange overlay installation
• Tethered power supply fixtures use model EDL-ZF (Lucifer Lighting recommends that the edge of the ceiling cutout be beveled to ensure proper fit)
4.88” / 124mm
3.60” / 91mm
8.00” / 203mm
.74” / 19mm
.070” / 2mm
.74” / 19mm
.018” / .5mm
.74” / 19mm
19.77” (502mm)
(aperture
centerline)
.070” / 2mm
3.46” / 88mm
3.62” / 92mm
.79”
20mm
page 2
luciferlighting.com
[112613]
©2013 Lucifer Lighting Company
As part of its policy of continuous research and product
development, the company reserves the right to change
or withdraw specifications without prior notice.
3750 IH35 North
San Antonio, Texas 78219
[ PH] +1-210-227-7329
[FAX] +1-210-227-4967
ORDERING
dl61zCR [LEDX]
IC or Non-IC applications use matching fixture and housing. Tethered power supply (remodel)
applications use NC fixture with matching power supply instead of housing.
Fixture Ex. Model No.
DL61ZCR-NC-W-1-801330-1
Housing Ex. Model No. DH-NC-ZF-1-8013-UNIVA
RM Power Supply Ex. Model No. PS-LEDX-RM-8013-UNIVA
A range of custom RAL, color matching and metal plate finishes are also available.
FINISH
W
Matte White Powder Coat
B
Matte Black Powder Coat
C
Polished Chrome
IG
Industrial Gray (Bead Blasted SS)
COLOR TEMPERATURE
MG
Metallic Gray Powder Coat
OPTIC
27 2700K
SS
Brushed Stainless Steel
1 40° Faceted
30 3000K
ABR
Architectural Bronze Powder Coat
2 40° Smooth
35 3500K
BRP
Polished Oil-Rubbed Bronze Plate
3 60° Smooth
40 4000K
BRM Matte Oil-Rubbed Bronze Plate
DL61ZCR
ACCESSORIES
ADDITIONAL EFFECTS DEVICES
AGL-2
CGL-2
FGL-2
HCL-2
LSL-2
SGL-2
WTL-2
Amber Glass Lens
Clear Glass Lens
Frosted Glass Lens
Honeycomb Louver
Linear Spread Lens
Spread Lens
Warm Tone Lens
HOUSING ZERO-SIGHTLINE
For IC or NC zero-sightline (ZO) installations, select appliqué.
DLA-APP-Z-RD-3 Standard, Recommended
DLA-APP-Z-RD-5 Minimal, -5 Ceilings
TETHERED POWER SUPPLY FIXTURES
INSTALLATION TYPE
IC IC/Airtight/CCEA
(Version depends
on System Config;
see page 2)
NC Non-IC or Remodel
CEILING THICKNESS
1 (ZF) 5/8”
2 (ZF) 3/4”
3 (ZF) 1”
4 (ZF) 1-1/4”
5 (ZF) 1-1/2”
6 (ZF) 1-3/4”
1 (ZO) 5/8” to 1”
NOMINAL SYSTEM CONFIGURATION
8007 80+ CRI, 10W / 700lm
8010 80+ CRI, 14W / 1000lm
8013 80+ CRI, 23W / 1300lm
9505 95+ CRI, 11W / 500lm
9507 95+ CRI, 16W / 700lm
9510 95+ CRI, 23W / 1000lm
For tethered power supply (remodel) installations, select mounting option.
EDLA-APP-Z-RD
EDL-ZF
Zero-Sightline Appliqué
Flange Overlay Collar
DH
FIXTURE FLANGE
ZF
Flange Overlay
ZO Zero-Sightline
Tethered power supply specification:
POWER SUPPLY
12T
120V Electronic, Triac †
UNIVA
120V-277V Electronic, Analog 0-10, Dim and Non-Dim ††
120V Electronic, Lutron 2 Wire Hi-Lume A †††
12L2
UNIVL3 120V-277V Electronic, Lutron 3 Wire Hi-Lume A †††
†Not for 9505 or 9507 system configurations.
††Not for 8007 system configuration.
†††Not for 9505 system configuration.
PS-LEDX-RM
LUTRON PRODUCTS COMPATIBILITY
Measured Light Output Range with all listed is 100% - 1%.
Power supply 12L2
Fixtures Per Control
Fixtures Per Control
120V
277V
Product Family
Part No.
(120V Only)
1 - 41
1 - 44
NTLV-600-CPN0199 1 - 8
NovaT®
MRF2-6ND-120
1-8
1 - 20
1 - 33
Maestro Wireless®
1 - 41
1 - 44
RadioRA®2 1000W
RRD-10ND
1 - 13
1 - 20
1 - 33
RadioRA 2 adaptive
RRD-6NA
1-8
1 - 20
-dimmer
1 - 20
1 - 33
RadioRA 600W
RA-6ND
1-8
1 - 20
1 - 33
RadioRA 1000W
RA-10ND
1 - 13
1 - 20
1 - 33
HQRD-6ND
1-8
HomeWorks® QS
1 - 20
1 - 33
600W (LED)
1 - 20
1 - 44
HomeWorks QS
HQRD-10ND
1 - 13
1 - 15
1 - 33
1000W (LED)
1 - 15
1 - 33
HomeWorks QS
HQRD-6NA
1-8
1 - 15
1 - 33
adaptive dimmer
1 - 15
1 - 33
HomeWorks QS WPM (LED) HQRJ-WPM-6D-120 1 - 10 (per output)
1 - 41
1 - 88
HomeWorks 600W dimmer HRD-6ND
1-8
1 - 15
1 - 33
HomeWorks 1000W dimmer HWD-10ND, HRD-10ND 1 - 13
1 - 15
1 - 33
HomeWorks WPM
HWI-WPM-6D-120
1 - 10 (per output)
1 - 20
1 - 33
GRAFIK EYE® QS
QSGR-, QSGRJ-
1 - 10 (per output)
(fluorescent)
1 - 15
1 - 33
GRX-3100, GRX-3500 1 - 10 (per output)
GRAFIK EYE 3000
1 - 15
1 - 33
(fluorescent)
1 - 41
1 - 88
RPM-4U module, (LCP, HW-RPM-4U-120,
1 - 26 (per output)
1 - 41
1 - 88
HomeWorks, GRAFIK
LP-RPM-4U-120
32 per EcoSystem link
Systems, Quantum®)
RPM-4A module, (LCP, HW-RPM-4A-120,
1 - 13 (per output)
HomeWorks, GRAFIK
LP-RPM-4A-120
63 per EcoSystem link
Systems, Quantum) (LED)
GP panels (LCP,
Various
1 - 26
64 per EcoSystem link
HomeWorks, GRAFIK
Systems, Quantum
64 per EcoSystem link
Stanza®
SZ-6ND
1-8
Power supply UNIVL3
Product Family
120V Part No.
277V Part No.
NovaT®NTF-10-NTF-10-277-
NTF-103P-NTF-103P-277-
Nova®NF-10-NF-10-277-
NF-103P-NF-103P-277-
Vareo®
VF-10-
--
SF-10P-
SF-12P-277-
Skylark®
SF-103P-
SF-12P-277-3
Diva®DVF-103P-DVF-103P-277-
DVSCF-103P-DVSCF-103P-277-
Ariadni®
AYF-103P-
AYF-103P-277-
VTF-6A-
Vierti®
Maestro®
MAF-6AM-
MAF-6AM-277-
MSCF-6AM-
MSCF-6AM-277-
Maestro Wireless® MRF2-F6AN-DV-
RadioTouch®
RTA-RX-F-
Spacer System®
SPSF-6A-
SPSF-6A-277-
SPSF-6AM-
SPSF-6AM-277-
LXF-103PL-
LXF-103PL-277-
Lyneo® Lx
RRD-F6AN-DV-
RadioRA® 2
HomeWorks® QS
HQRD-F6AN-DV
Interfaces
PHPM-3F
PHPM-3F-DV GRX-FDBI-16A
PowPak™ RMJ-ECO32-DV-B
with Ecosystem
Energi Savr Node™ QSN-1ECO-S, QSN-2ECO-S
with EcoSystem
GRAFIK Eye® QS QSG-_P120
with EcoSystem
Quantum®
Various
page 3
luciferlighting.com
[112613]
©2013 Lucifer Lighting Company
As part of its policy of continuous research and product
development, the company reserves the right to change
or withdraw specifications without prior notice.
3750 IH35 North
San Antonio, Texas 78219
[ PH] +1-210-227-7329
[FAX] +1-210-227-4967
WITH SPECULAR REFLECTOR AND CLEAR FLAT GLASS LENS
INDEPENDENT TEST LABORATORY REPORT No. 28741
LED ARRAY. LUMINAIRE OUTPUT = 624 LMS.
PS-LEDX.1-A-T
DRIVER- OPERATING
120 VAC AND
14.5 WATTS
LUCIFER LIGHTING
LED DOWNLIGHTAT
LUMINAIRE,CAT#
DL61Z-CR-W-LEDX.1-3K-40F.
dl61zCR [LEDX]
PHOTOMETRICSWITH SPECULAR REFLECTOR AND CLEAR FLAT GLASS LENS
LED ARRAY. LUMINAIRE OUTPUT = 624 LMS.
PS-LEDX.1-A-T
DRIVER
OPERATING
AT 120
VAC
ANDlens
14.5
DL61ZCR:ONE
Nominal
80+ CRI, 3000K,
10W, 700
lumen package,
clear
glass
, 624WATTS
delivered lumens. INTENSITY(CANDLEPOWER)
SUMMARY
40° faceted optic. Refer to website for additional photometry, if available.
SUMMARY
ANGLEINTENSITY(CANDLEPOWER)
MEAN CP
LUMENS
0
1889
ANGLE
MEAN CP
LUMENS
5
1764
0
1889 158
5
1764
158
10
1400
10
15
1120 1400 295
15
1120
295
20
20 703
703
25
25 337
337 154 154
30 85
85
30
35
11
35
13 13
40 11
6
Sciences
Inc. 2
40
6
45 Lighting
3
50 7826
2
45
3 E. Evans
2
Road
55
1
1
50
2
60 Scottsdale, 0Arizona 85260 USA
55
1 480-991-9260
1 • Fax:
www.lightingsciences.com
65 Tel:
0
0 480-991-0375
70
0
60
0
75
0
65
0
0 0
80
0Lighting Sciences Inc.
07826 E. Evans0Road
INDEPENDENT TEST LABORATORY70REPORT 85No.0 28740
75
0
0 Arizona 85260 USA
90
0Scottsdale,
80
0
www.lightingsciences.com
Tel: 480-991-9260 • Fax: 480-991-0375
IGHTING - LED DOWNLIGHT LUMINAIRE,CAT#
DL61Z-CR-W-LEDX.1-3K-40F.
ZONAL
LUMENS AND PERCENTAGES
85
0
0
WITH SPECULAR REFLECTOR AND PRISMATIC
FLAT
GLASS
LENS
90LABORATORY
0LUMENSNo.% 28740
ZONE
LUMINAIRE
INDEPENDENT TEST
REPORT
ghting Sciences
Lighting Sciences
LED ARRAY. LUMINAIRE OUTPUT = 0-30
669 LMS.607
97.26
0-40
621
99.40
PS-LEDX.1-B-T
DRIVER
OPERATING
AT
120
VAC
AND
17.8
WATTS
ZONALLUMINAIRE,CAT#
LUMENS AND PERCENTAGES
LUCIFER LIGHTING - LED DOWNLIGHT
DL61Z-CR-W-LEDX.1-3K-40F.
0-60
624
99.95
WITH SPECULAR REFLECTOR AND0-90
PRISMATIC 624
FLAT GLASS
LENS
100.00
LED ARRAY.
LUMINAIRE
OUTPUT =% 669
40-90
4 LMS. 0.60
ZONE
LUMENS
LUMINAIRE
ONE PS-LEDX.1-B-T
DRIVER
AT 120
AND
17.8
WATTS lumens. DL61ZCR: Nominal
80+ CRI, 3000K,
14W,
1000OPERATING
lumen
package,
soft VAC
focus
lens,0.05
669 delivered
60-90
0SUMMARY
INTENSITY(CANDLEPOWER)
0-30
607
97.26
40° faceted optic. Refer to website
for additional
90-180 photometry,
0 if available.
0.00
0-40
621
0-180
624 99.40
100.00
ANGLE INTENSITY(CANDLEPOWER)
MEAN
LUMENS
0-60
624 CP
99.95 SUMMARY
1811
(LUMENS PER
WATT): 43.1
0-900 EFFICACY
624
100.00
ANGLE
MEAN
CP
5
1695
154 LUMENS
1"
0.60
40-90
04 AN ABSOLUTE
1811
14
*** THIS IS
TEST ***
10
1409
60-90
0.05
50
1695
154
23
"
8
10
1409
15
1082
292
2.375
INS
LUMINOUS
DIAMETER:
90-180
0
0.00
15
1082
292
20
710
0-180
624
100.00
3
20
710
28"
25
375
25
375173
173
30 (LUMENS30
147
147
LUMINANCE SUMMARY CD./SQ.M.
S/MH:
0.6
EFFICACY
PER WATT):
43.1
3552
52 38
38
SC:
0.6
35
40
22
1
40 IS AN ABSOLUTE
22
14"
TEST
*** 9
45
11
ANGLE MEAN ***
CD/SQTHIS
M
CERTIFIED
BY:
3
45
11
9
50
6
28"
45
1401
DATE:
55 6
3
3
50
55
697
APR 13,
2011
2.375
INS
LUMINOUS
DIAMETER:
60 3FOR:
1
65
239
PREPARED
55
3
65 LUCIFER LIGHTING
0
0
75
43
60
70 1
0
23
"
85
0
SAN ANTONIO,
TX
8
75 0
0
0
65
0
80
0
TESTED
IN
ACCORDANCE
WITH
IES
PROCEDURES.
70
0
MINANCE SUMMARY CD./SQ.M.
85
0S/MH: 0 0.6
75
0
SC:
0.6
90 0
0
80
0
ZONAL0 LUMENS AND PERCENTAGES
85
0
ANGLE MEAN CD/SQ M
CERTIFIED
BY:
90
0
45
1401
DATE:
ZONE
LUMENS % LUMINAIRE
0-30
619 APR 92.52
55
697
13, 2011
0-40
657
98.20
ZONAL
LUMENS
AND
PERCENTAGES
65
239
PREPARED FOR:
0-60
669
99.97
75
43
LUCIFER
LIGHTING
0-90
669
100.00
ZONE
LUMENS
% LUMINAIRE
85
0
SAN
ANTONIO,
TX
1.80
40-90
12
page 4
60-90
0
0.03
0-30
619
92.52
90-180
0
0.00
luciferlighting.com
Lucifer Lighting Company
3750 IH35 North
0-40
657
98.20
TESTED IN ACCORDANCE
WITH IES ©2013
PROCEDURES.
0-180
669 research
100.00
As part
of its policy of continuous
and product
San Antonio, Texas 78219
0-60
669 the company 99.97
development,
reserves the right to change
[ PH] +1-210-227-7329
or withdraw
without
notice. 37.6 [FAX] +1-210-227-4967
0-90
669specifications
100.00
EFFICACY
(LUMENS
PER prior
WATT):
[112613]
1.80
40-90
12
1
1 "
*** THIS IS AN ABSOLUTE TEST ***