Production Lifting Technologies,
Services, and Optimization
Integrated lifting solutions for enhanced well production
Comprehensive
artificial lift solutions
Pioneering technology, services and optimization
Through strategic acquisitions, Schlumberger has brought together
the best and brightest in the artificial lift industry. Located throughout
the major basins, our team offers specialized expertise and complete
equipment packages for every flow rate, including rod lift, progressing
cavity pumps (PCPs), hydraulic stroking units, electric submersible
pumps (ESPs), horizontal pumping systems, and gas lift.
Improve total cost of ownership by maximizing production and
decreasing downtime using integrated solutions that keep your
operation running at peak performance.
01
02
Integrated production
performance system
Horizontal Pumping System
Extensive offerings at any flow rate
Responding to changing flow rates requires in-depth knowledge of
flow behavior and downhole conditions. Schlumberger offers products
capable of handling a variety of flow rates in both mild and extreme
environments.
Our real-time surveillance services provide accurate monitoring to
indicate when a different form of artificial lift is required, enabling
operators to quickly transition to a new system with minimal
downtime.
Using optimization data, our experts can predict when one form of
artificial lift will become less efficient and choose the optimal time to
implement a different method.
03
Electric Submersible Pump
Rod Lift
Progressing Cavity Pump
Gas Lift
04
ESP systems
Maximum power and production
REDA Maximus ESP system
Maximize production, increase system run life, and ultimately reduce
system costs with a powerful, efficient ESP system fit for any well. With
a range of options tailored for unconventional or harsh environments,
high-temperature wells, ultralow-volume wells, and other more common
well conditions, Schlumberger ESPs deliver high production rates early
in the artificial lift cycle.
Increase reliability and safety with an ESP system that features
a plug-and-play motor, protector, and gauge.
REDA Continuum unconventional extended-life ESP
Improve recovery and reliability at low rates and in gassy
and abrasive environments.
REDA Hotline high-temperature ESP systems
Increase production in high-temperature applications.
REDA Coil coiled-tubing-deployed ESP system
Eliminate rig interventions to change out an ESP.
ZEiTECS Shuttle™ rigless electric submersible pump
replacement system
Retrieve and deploy your ESP without a rig or hoist with downhole
electrical wet-connector technology for wireline, coiled tubing,
or sucker rods.
MaxFORTE intervention-constrained high-reliability
ESP system
The ZEiTECS Shuttle alternative deployment system.
05
Ensure trouble-free operations with continuous monitoring
using one integrated system for thermal, deepwater, and
hostile environments.
06
PCP systems
Engineered for performance
KUDU PCP
KUDU PCPs incorporate unique designs to handle the demands
of heavy, medium, or light oil, coalbed methane, and dewatering
applications at flow rates up to 1,000 bbl/d [160 m3/d]. Engineered
to deliver a consistent head capacity with superior handling of solids
and high-viscosity fluids, KUDU PCPs ensure maximum production
performance even after the initial flow rate has dropped.
Produce with maximum efficiency and less power consumption
in lower-flow-rate wells.
Driveheads
Improve safety and reliability with durable driveheads ranging
from 7.5 kW to 149 kW.
Power units
Prevent environmental spillage and provide noise control
with open-skid and walk-in power unit designs.
Hydraulic stroking unit
Next-generation hydraulically powered rod reciprocating system
incorporates a preventative leak-free design and unmatched
long stroke.
KUDU PCP Well Manager™ family of products
Protect your oilfield equipment and ensure your well is always
running at optimum levels.
07
08
Horizontal pumping systems
Designed for years of trouble-free service
The REDA HPS horizontal multistage surface pumping system is a
cost-effective alternative to conventional industrial pumps. Designed
using ARZ abrasion-resistant zirconium for high-wear-resistant
bearings, the pumping system effectively handles harsh conditions,
as well as surface installations. The system’s flow capabilities range
from 40 galUS/min to 1,850 galUS/min [218 m3/d to 10,084 m3/d]
with as much as 1,864 kW in a single unit.
09
10
Rod lift systems
Advanced sucker rod pumping performance
Pumping units
Located throughout the major basins of North America, our rod lift
team offers expertise and equipment tailored for low-flow wells.
Through technology, innovation, a system engineering approach,
and leadership in automation, our rod lift team offers a range
of equipment, including pumping units, downhole and surface
equipment, spare parts, and reconditioned pumping units.
Maximize production with beam-balanced, low-profile, improvedgeometry, and conventional pumping units.
Rods and downhole equipment
Improve production reliability downhole with sucker rods, polished
rods, coiled tubing, downhole pumps, and gas separators.
Wellhead and surface equipment
Reduce downtime with comprehensive lift packages that include all
the surface equipment used to hang the sucker rod string and downhole pump and to hook up the well to the flowline.
Concrete bases
Stabilize equipment with portable concrete for various applications.
Prime movers
Optimize energy consumption through a large selection of electric
motor and gas engine prime movers.
11
12
Gas lift systems
Reliable performance in low-productivity wells
Side pocket mandrels
Our gas lift installations effectively manage abrasive materials,
such as sand, and can be used in low-productivity, high gas/oil ratio
wells, or deviated wellbores. New gas lift systems are pressure
barrier qualified and rated to a higher pressure to provide reliable
performance in deepwater and subsea wells, deeper depths of gas
injection, and enhanced wellbore integrity.
Minimize or eliminate costly workovers with an innovative
and industry-original design.
Retrievable gas lift valves
Enhance well performance with one of the industry’s
most time-tested products.
Conventional gas lift systems
Maximize production with conventional tubing-retrievable
gas lift equipment.
Surface flow control valves
Improve revenue with cost-effective, dependable
flow control valves.
13
14
Real-time surveillance and optimization
In-depth analysis and diagnostics
Lift IQ real-time production flow rate analysis service
Artificial lift monitoring systems draw on Schlumberger technology,
highly systemized processes, and expertise to help you improve current
lift system performance. Real-time data enables operators to gain
immediate increases in production and develop plans to optimize
underperforming wells.
Identify changes in well or reservoir performance through high-frequency
liquid flow rate and water cut calculations for any brand of ESP, at any
point on the pump curve.
DesignRite artificial lift design and optimization software
Simplify the design process of ESP and gas lift systems with intuitive,
user-friendly workflows.
LiftPro well optimization service
Optimize production in underperforming artificially lifted wells.
LiftWatcher real-time surveillance service
Achieve round-the-clock surveillance of artificial lift systems, even
in locations where access is difficult or a data acquisition system
is unavailable.
15
Phoenix xt150 high-temperature ESP monitoring system
Monitor downhole pressure, temperature, current leakage, and vibration,
providing comprehensive data needed to protect ESP system integrity
and optimize well performance.
Phoenix CTS cable-to-surface artificial lift downhole
monitoring system
Acquire pressure, temperature, and vibration measurements in real time
for in-depth identification, diagnostics, and analysis.
16
Surface electrical equipment
Pump control for ESPs and surface pumping systems
Variable speed drives
Schlumberger offers a complete line of surface electrical equipment
specifically tailored to applications involving ESPs and surface pumping
systems. Field measurements and computer modeling are used to select
and deliver products customized to your well.
Enable pump performance across a wider operating range
than typical by varying their speed; available in both low voltages
and medium voltages.
Fixed speed drives
Provide motor control, protection, and monitoring in low- to
medium-voltage switchboards.
Power analysis and project management
Improve the performance of surface power and control systems with
project engineering, data delivery, and manufacturing capabilities.
Surface equipment controllers
Eliminate the need for multiple surface components with all
wellsite control, surface, and downhole data acquisition
functions in a single interface.
17
18
Engineered Solutions Group
Innovative solutions from start to finish
Alternate deployment conceptual and detailed designs
The engineered solutions group is made up of a multidisciplinary team
of petroleum, mechanical, and electrical engineers with extensive
experience in artificial lift applications and solutions. These technical
experts provide innovative solutions from concept to design and testing.
Designs review possible alternate deployed systems for CT systems,
ZEiTECS Shuttle rigless ESP deployment system, or wireline.
Feasibility, concept, and front-end engineering design studies
The test ensures proper installation and testing of mechanical integrity,
operational procedures, and field personnel training.
Superior workflows and software packages enable the selection of the
most viable and economic lift method for a field or well, deployment
options, and completions design.
Engineered completions architecture solution
Advanced and complex artificial lift designs and optimization
Electrical power optimization studies
Experts customize specific items to suit any application as required.
Operators can create advanced and complex designs for a variety of
applications including subsea, dual ESPs, multizone, viscous fluid
production, multiphase flow simulation, ESP with POD, dual bypass,
dual concentric, multizone commingling, and HPHT wells.
Electrical and electronics engineers ensure units have the necessary
power supply for any application and provide guidance in surface
equipment selection, assessment, integration, and packaging.
Completions design and stress analysis
Risk analysis, documentation control, and changes are properly managed.
Tubular stress analysis verifies the integrity of the completion under the
combined tension, compression, burst, and collapse stresses throughout
the life cycle of the well.
19
System integrated test
Project management
20
Technical expertise
Complete well flow management
Schlumberger field specialists work locally with the operator to
provide multidisciplinary expertise, technology integration, and
collaboration for improved operations. From reservoir characterization
and comprehensive development planning to production optimization,
Schlumberger petrotechnical professionals combine expertise along
with industry-leading technology and software capabilities to design
optimal solutions at any stage of your artificial lift operation.
21
22
Artificial Lift Services
Comprehensive support for all forms of artificial lift
Schlumberger reservoir and production engineers can perform
detailed analysis of field, reservoir, and well behavior. As part of our
available services, our experts work with you to diagnose equipment,
well, and reservoir problems, recommend corrective actions, and
predict performance benefits after remedial action.
23
24
25
26
Production Lifting Technologies, Services, and Optimization
slb.com/AL
ARZ, DesignRite, LiftPro, LiftWatcher, Lift IQ, MaxFORTE, Phoenix CTS,
Phoenix xt150, REDA Coil, REDA Continuum, REDA Hotline, REDA HPS, and
REDA Maximus are marks of Schlumberger.
ZEiTECS Shuttle is a registered trademark of Schlumberger.
Copyright © 2015 Schlumberger. All rights reserved. 15-AL-6817