NXP USB Type-C SolutionsDistribution Bronze Certification Training Ravi S. Shah Secure Interfaces and Power June, 2015 COVER PAGE SUBTITLE PLACEHOLDER COMPANY CONFIDENTIAL USB Type – C Interface Benefits Size • Smaller connector designed to fit all form factors Ease of use • User friendly • Independent of Plug orientation and cable direction Future Scalability • Designed to support future upgrades in the spec – higher speeds ‘Extends’ USB family • Legacy USB devices supported ‘Last connector’ • Enables one connector platform • Supports power, video and data over single connector USB Type C Ports Port Type Description DFP – Downstream Facing Port “USB host” & initial Vbus/VCONN source, Typical Standard-A host UFP – Upstream Facing Port “USB device” & initial Vbus sink, Typical Standard-B device DRP – Dual Role Port A port that may operate as a DFP or UFP USB Type-C Configuration Channel CC pins and functionality • • • • Attach/Detach detection Determination Plug orientation Initial Port role determination USB PD Type C Communication (For PD) • • Modification of initial port roles Negotiation of USB PD power contracts • Management of Functional Extensions (For PD) • Structured Vendor Defined Messages (VDM) 4 USB Type C Spec – Power Priority order for power 1. USB PD 2. USB Type-C Current 3. USB BC1.2 4. USB 2.0, USB3.1 Type Voltage Current USB2.0 5V 500mA USB3.1 5V 900 mA USB BC1.2 5V 1.5A USB Type-C Current 5V 1.5A, 3A USB Type-C PD Up to 20V Up to 3A (Cable) Up to 5A (Elec. Marked Cable) Up to 5A (Receptacle, Direct, Captive cable) 5 What is USB-Power Delivery (PD)? • USB-PD specification extends USB capability to 100W • Various power configurations possible – fixed, programmable, battery, fast charging • Possible to change the power flow (role-swap) • Various power profiles defined: • • • • • Profile # 1 – capable of supplying 5V @ 2A Profile # 2 – capable of supplying 5V @ 2A, 12V @ 1.5A Profile # 3 – capable of supplying 5V @ 2A, 12V @ 3A Profile # 4 – capable of supplying 5V @ 2A, 12V and 20V @ 3A respectively Profile # 5 – capable of supplying 5V @ 2A, 12V and 20V at 5A respectively What is Alternate Mode support? • Alternate Mode support allows signals other than USB to pass through the Type-C connector. • Under Alternate mode, a Type-C DRP can check the capability on the other end and send DisplayPort data over Type-C. • Up to 4-lanes of DP signals can be sent through Type-C interface. • This way video connectors other than DisplayPort (like VGA, HDMI) can be supported through Type – C protocol converters USB Type-C Pinout COMPANY CONFIDENTIAL USB Type-C Connector – Pinout and Alignment Receptacle (Front View) USB3.0 USB2.0 Reverse Plug Normal Plug System Solution USB3.0 AC/DC Adaptor Type-C Cable Active cable & adaptor 9 USB Type-C Receptacle Pins Pins defined for system or device receptacle High-Speed UDB 2.0 plug pinout System Solution AC/DC Adaptor Type-C Cable Active cable & adaptor COMPANY CONFIDENTIAL 10 Ecosystem Illustration NXP offers USB Type-C solutions in Systems Cable and dongle adaptors AC/DC power adaptors USB PD Power Adaptor Contrast USB PD Brightness Type-C Type-C Type-C USB PD Power Adaptor Type-C Type-C USB PD Type-C USB PD Vbus Type-C Type-C Type-C USB PD Type-C Battery Charging COMPANY CONFIDENTIAL 11 Ecosystem Illustration (I) NXP offers USB Type-C solutions in Systems Cable and dongle adaptors AC/DC power adaptors USB PD Power Adaptor Type-C Contrast USB PD Brightness Type-C Type-C USB PD Power Adaptor Type-C USB PD Type-C Type-C USB PD Type-C Type-C Type-C USB PD Type-C Type-C Battery Charging USB PD Network Instrumentation Gateway COMPANY CONFIDENTIAL 12 Storage Set Top Box USB-Key Gaming Ecosystem Illustration (II) NXP offers USB Type-C solutions in Systems Cable and dongle adaptors AC/DC power adaptors USB PD Power Adaptor Type-C Contrast USB PD Brightness Type-C Type-C USB PD Power Adaptor Type-C USB PD Type-C Type-C USB PD Type-C Type-C Type-C USB PD Type-C Type-C Battery Charging USB PD Medical Automation Industrial COMPANY CONFIDENTIAL 13 Home Appliance Small Appliance ET Phone Home Ecosystem Illustration (III) NXP offers USB Type-C solutions in USB PD Power Adaptor Systems Cable and dongle adaptors AC/DC power adaptors Contrast Type-C Type-C USB PD Power Adaptor USB PD Brightness Type-C Type-C USB PD Type-C Type-C USB PD Vbus Type-C Type-C Type-C USB PD Type-C Battery Charging COMPANY CONFIDENTIAL 14 System Solution for USB Type-C Connector Type-C Pinout Load Switches USB PD PHY Authentication Micro Controller IntelligentHigh Switch Performance Switches Signal Conditioner Audio CODEC NXP Products Please click on the NXP Product of interest to review I/F Protectors System Chipset VBUS VCONN USB Type-C USB2.0 USB3.0 CC Logic RFU COMPANY CONFIDENTIAL 15 USB Type-C Active Cable and Adaptor Solution (Cont.) Type-C Pinout Legacy interface (Ex. DP-VGA) VBUS VBUS USB2.0 USB3.0 CC Logic DC/DC Protocol Bridge I/F Protectors VCONN I/F Protectors USB Type-C Plug VCONN USB responder Type-C The cable adaptor USB2.0 will need to inform the Alternate mode support to USB3.0 the system side. CC Logic RFU RFU Cable adaptor Responder NXP Products Cable PHY and protocol IC Please click on the NXP Product of interest to review COMPANY CONFIDENTIAL 16 USB Type-C Full Featured Passive Cable Solution Type-C Pinout VBUS VCONN VCONN USB3.0 CC Logic I/F Protectors USB2.0 I/F Protectors USB Type-C VBUS RFU USB Type-C USB2.0 USB3.0 CC Logic RFU Electronic Cable Marker NXP Products Please click on the NXP Product of interest to review COMPANY CONFIDENTIAL 17 AC/DC Adaptor Solution for USB Type-C Connector Type-C Pinout Load Switches AC/DC Converter Micro Controller I/F Protectors USB PD PHY VBUS VCONN USB Type-C USB2.0 USB3.0 CC Logic RFU Authentication NXP Solutions Please click on the NXP Product of interest to review COMPANY CONFIDENTIAL 18 USB Type-C Switches COMPANY CONFIDENTIAL What is a Signal Switch and why NXP? Why is it needed? – For type-C connector to support “Alternate Mode” or “plug flippable” functions, either multiplex or de-multiplex switch function will be used, or sometimes these functions are combined together to become a cross-point switch. What is a Signal Switch? – Switch provides signal multiplex or de-multiplex function in order to redirect the transmitted signals to same connection port (multiplex switch) or different connection ports (de-multiplex switch) Why NXP? – Signal switch has no signal regeneration function, and it works at transistor level to redirect the passed signal. The switch architecture design highly impacts the bypassed signal integrity. – NXP’s signal switches provide best-in-class high performance features: • • • • High signal bandwidth Low return loss Low crosstalk Low jitter disturbance COMPANY CONFIDENTIAL 20 Switches Overview for USB Type-C Applications CBTL02043 CBTL08GP053 CBTL04GP043 A0_P B0_P A0_N B0_N A1_P B1_P A1_N B1_N C0_P C0_N C1_P C1_N SEL XSD Mobile & Portable Applications Computing Applications System Solution AC/DC Adaptor Type-C Cable Computing & Docking Applications Active cable & adaptor COMPANY CONFIDENTIAL 21 CBTL02043 10 GHz High Bandwidth Switch 2 differential channel, 2:1 bi-directional mux/demux Signaling Supported – PCIe Gen3 @ 8Gbps Insertion loss – -0.5dB at 100 MHz – -1.2dB at 4 GHz A0_P B0_P A0_N B0_N A1_P B1_P A1_N B1_N C0_P C0_N C1_P C1_N SEL – -3.0dB at 10 GHz XSD Low Return-Loss -19.4dB at 4GHz Low crosstalk: -28dB at 4GHz Applications: Low Off-isolation: -23dB at 4GHz Low intra-pair skew: 5ps typical Type-C connector Low inter-pair skew: 35ps max PCIe Gen 3 3.3 V supply voltage DisplayPort V1.2 DHVQFN20 package USB 3.0 ESD 2kV HBM, 1kV CDM SATA Gen 3 Two pin outs available for PCB layout optimization Now in Production Standby current < 1 uA controlled by XSD pin System Solution AC/DC Adaptor Type-C Cable Active cable & adaptor COMPANY CONFIDENTIAL 22 CBTL04GP043 - Crossbar Switch for USB Type-C Connector The new USB Type-C connector, built initially on existing USB 3.0 and USB 2.0 technologies, is being developed to help enable thinner and sleeker product designs. Key characteristics of the USB Type-C connector and cable solution include: – New smaller size – similar in size to the existing USB 2.0 Micro-B – Usability enhancements – users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in – The Type-C connector and cable will support scalable power charging (USB PD) Now in Production System Solution AC/DC Adaptor Type-C Cable • Dual 2x2 differential channel cross bar switch • Operating voltage range : 2.7 V to 3.5 V • Bandwidth: 7 GHz (typical) for VIC = 0 V; 8.5 GHz (typical) for VIC = 2.2 V • Low insertion loss, return loss and crosstalk • Back current protection on all I/O pins of these switches • XFBGA28 package with 0.5 mm pitch Active cable & adaptor COMPANY CONFIDENTIAL 23 CBTL08GP053 – USB Type-C Combo Switch • • • • • • • • • • • Applications in platforms supporting Alternate Modes to transport multiple high speed signals over USB Type-C connector Supports data rates up to 5.4 Gbps Supports several use cases • USB3 • USB3, DP 1/2/4-lanes • USB3, PCIe (1-lane) High Speed Mux target specs • Bi-directional usage support (mux or switch) • -3dB BW: >5 GHz • Insertion loss: 1.3 dB@ 2.7 GHz • Isolation: 25 dB @ 2.7 GHz • Return loss: 18 dB @ 2.7 GHz • Cross talk: 35dB @ 2.7 GHz High speed and Side band Mux support (controlled via I2C) Back current protection on control pins Side band muxes can handle up to 5V (rail to rail signaling) Single 3.3V supply Active Current consumption ~500 uA ESD 2kV HBM, 500V CDM 36-ball BGA, 0.4 mm pitch System Solution AC/DC Adaptor Type-C Cable Sampling March 2015 Active cable & adaptor COMPANY CONFIDENTIAL 24 Signal Conditioner USB 3.0 re-driver COMPANY CONFIDENTIAL What is a USB signal conditioner and why NXP What is a USB signal conditioner? – Signal conditioner is an active signal regenerator which utilizes equalizer and amplifier to reshape the bypassed signal in order to remove jitters and reopen the differential signal eyes for longer channel transmission and reduce the bit error rate. Why is it needed? – Type-C connector use case would need to transmit or receive USB3 signals through connector, Type-C switch and long trace length. The USB3 redriver can improve the signal eye diagram, extend the link distance and help to pass compliance test. Why NXP? – NXP provides complete USB3.0 signal conditioners from single channel, dual channel to quad channel configurations in different packages. – NXP’s signal conditioners provide high performance features • Programmable equalizer and amplitude settings • Ultra low active and standby power consumption • Small outline packages COMPANY CONFIDENTIAL 26 USB 3.0 Redrivers • Single and dual-port options • 5-Gbps bandwidth DESCRIPTION USB 3.0 Single Port USB 3.0 Dual Port USB 3.0 Half Port (Single Channel) USB 3.0 Single Port BANDWIDTH SETTINGS POWER SAVING PART# 5 Gbps 5-state quinary pins OS EQ DE 53 mW @ U2/U3 20 mW @ No Connect 10 mW @ Sleep mode PTN36241B 5 Gbps binary pins OS EQ DE 66 mW @ U2/U3 26 mW @ No Connect 0.5 mW @ Sleep mode PTN36242L active: 97 mW (54mA) deep power saving: 18 µW (10 µA) PTN36221A 5 Gbps 5 Gbps adjustable RX equalization, TX de-emphasis & output swing adjustable RXequalization both channels, TX deemphasis&output swing PTN36241G USB Power Delivery Controller and Protocol Responder COMPANY CONFIDENTIAL What is USB Power Delivery and why NXP What is USB PD ? – USB PD stands for USB Power Delivery which is the goal of USB connection to provide USB data link and also power from host to device or vice versus from device to host. The maximum power delivery via USB PD 2.0 can be up to 5A and 20V through connector or 3A and 20V through USB cable. – The USB PD protocol is also used to communicate the characteristics of the peripherals with system to establish the link operation. Why is it needed? – USB PD to provide higher power delivery than the legacy USB spec. – Type-C cable adaptor and full-featured Type-C cable electronic marker to communicate the product and/or cable capability information via PD protocol signal – Alternate mode support to transport non-USB data over Type-C Why NXP? – NXP provides optimized system partitioned products with balanced cost and performance. NXP’s USB PD products and PD Firmware have robust compatibility and complete functions for • • • • USB PD 2.0 Physical Layer controller USB active cable or cable adaptor controller USB Type-C full-featured cable electronic marker USB Type-C CC logic controller COMPANY CONFIDENTIAL 29 USB Type-C PD PHY and CC Logic Controller PTN5150 PTN5100 CC Logic PD PHY IH VBUS_DET ID ADR/CON_DET VDD IM CC1 ID Rd CC Level Detection and Indication EXT_SEL_2 IH VDD IM CC2 ID Rd PORT Role (Host/Device/ Dual) Control DEVICE CONTROL AND MANAGEMENT SCL SDA INTB Type-C CC logic, Legacy USB, OTG System Solution Alternate Mode & USB Power Delivery AC/DC Adaptor Type-C Cable Active cable & adaptor COMPANY CONFIDENTIAL 30 PTN5150 CC Logic Controller CC logic control supports plug detection, orientation detection, role identification and charging current detection Support USB ID(OTG) output Selectable Dual Role or Device only control Support VCONN PFET control Operating current: < 40uA; Shut down current: 5uA VDD supply voltage range: 2.7v to 5.5v Small Thin X2QFN12 package 1.6mm X1.6mm X0.35mm with 0.4mm pitch Sampling July, 2015 System Solution AC/DC Adaptor Type-C Cable Active cable & adaptor COMPANY CONFIDENTIAL 31 PTN5150 System Application - Support USB OTG, USB3 Connection Flip, USB Type-C Fast Charging and Vconn Power Enable Charger Detect USB Power Delivery VBus Vconn (CC) I/F Protector System Chipset USB3 Switch I2C USB2.0 USB Type-C USB3.0 CC Logic PTN5150 ID CC Control Logic System Solution AC/DC Adaptor Type-C Cable SBU Active cable & adaptor COMPANY CONFIDENTIAL 32 PTN5100 – USB Type-C PD PHY and Protocol IC Application – USB Power Delivery Flexible to work with NXP or any 3rd party MCU via SPI or I2C interface Power control and related functions VBUS (3.7-25V) for local supply Baseband PD functions Type-C Cable/plug detection and indication (Host, Device and Dual role mode support) USB PD Baseband PHY - BMC, 4B5B, Preamble, SOP, SOP’, SOP’’ and EOP generation/reception, CRC generation/check, GoodCRC response • Paired with NXP LPC11xx MCU series or embedded system controller (EC) VCONN Low RON switch (up to 5W max) I2C or SPI slave interface Power Supply options – VBUS or VDD/VIO • Licensing of the USB-PD Firmware (Protocol & Policy Engine) is available upon request Package HVQFN20 4mm x 4mm, 0.4 mm pitch Samples Now System Solution AC/DC Adaptor Type-C Cable Active cable & adaptor COMPANY CONFIDENTIAL 33 Micro Controllers COMPANY CONFIDENTIAL NXP USB Type-C MCUs What are NXP USB Type-C MCUs? – Cost Effective, Small, Low-Power, Industry Leading Microcontrollers Why are NXP USB Type-C MCUs needed? – – – – – Power negotiation Proper timing and response Support for different protocols and switching Spec compliance Authentication Why NXP? – – – – Broad range of high performance MCU In house USB-PD firmware Fully compliant total solution, one stop shopping BOM reduction capability, due to flexibility to integrate major functions – USB Type-C and Sensor Hub, or Embedded Controller System Solution AC/DC Adaptor Type-C Cable Active cable & adaptor COMPANY CONFIDENTIAL Use Case, Configuration & Firmware Features Use case System – Standalone Desktop PC, Laptop, Notebook Tablet, Smartphone Configuration PD Firmware Features • • PTN5100 + LPC1115 • PD v2.0 Provider/Consumer role Alternate mode support & High Speed Switch (HS) control Load switch control System – Integration Sensor Hub (Now) Embedded Controller (Future) PTN5100 + LPC54102 • • • PD v2.0 Provider/Consumer role Alternate mode & HS Switch control Load switch control Accessories (USB based) Cable Adaptor/ Dongle PTN5100 + LPC11U35 • • • PD v2.0 Consumer role Alternate mode & HS Switch control Billboard device support Power Adaptors AC-DC PTN5100 + LPC1115 • • PD v2.0 Provider role only AC-DC voltage control IO System Solution AC/DC Adaptor Type-C Cable Active cable & adaptor COMPANY CONFIDENTIAL USB Load Switches COMPANY CONFIDENTIAL What are the USB Type-C Load Switches and why NXP? What is the Type-C Load Switch product? – Advanced unidirectional N-channel power switch designed to automatically isolate a system from a faulty source or load. It includes under-voltage protection, reverse current protection, over-temperature protection, programmable over-voltage protection, and/or programmable current limit. Why is it needed? Type-C load switches provide protection for 2 main use cases: – Consumer use-case where the notebook is being charged. The load switches protects the system from OVP surges from faulty wall adapter or external supply, and reverse connector plug-in. – Provider use-case where the notebook is providing power to an external load (such as On-The-Go). The load switch protects the system from overcurrent, short circuits, and reverse currents caused by a faulty load or upside-down connector plug-in. Why NXP? – NXP provides simple to implement, yet robust and affordable solutions in a variety of packages COMPANY CONFIDENTIAL 47 USB Type-C Power Paths 5.0 V / 3.0 A 12 V / 3.0 A 20 V / 5.0 A NX20P5090 – 20V/5A OVP load switch Battery charger / PMU Type-C Connector Vbus 3.0 A / 5.0 V OTG 5V regulator Power delivery path Charging (consumer) Supplying, OTG (provider) NX5P3090 - 3 A current limiting load switch NX5P2190 – 2 A current limiting load switch System Solution AC/DC Adaptor Type-C Cable Active cable & adaptor COMPANY CONFIDENTIAL 48 AC/DC Converter COMPANY CONFIDENTIAL What is USB Type-C AC/DC Solution and why NXP? What is the USB PD / Type-C AC/DC Solution? – NXP’s high efficient GreenChip QR/DCM Flyback controller TEA1836 in combination with NXP’s Synchronous Rectifier TEA1892 guarantee highest possible efficiency combined with very low stand-by power. Why is it needed? – Multiple output voltages as defined in the USB-PD standard provide a challenge to meet energy regulations like Energy star, the US Department of Energy (DoE) regulation and the European Code of Conduct (CoC). NXP’s GreenChip solutions help to meet those requirements. Why NXP? – NXP has a proven track record on high efficiency, low-power standby solutions in Power Supplies and is once more leading the industry with the current offering of the TEA1836 & TEA1892. COMPANY CONFIDENTIAL 41 “Cool Cube” Platform Base for USB-PD Gen 1 TEA1892 VBus USB Type-C Plug Discrete TL431 Based Sub System TEA1836 USB PD Interface CC1 CC2 Gnd Opto 1 e.g. NXP PTN5100 & LPC11E35 Opto 2 TL431, TEA1836, TEA1892, & LPC11E35 Now in Production LPC11E35 is Sampling Now. USB PD PTN5100 is Sampling Now System Solution AC/DC Adaptor Type-C Cable Active cable & adaptor COMPANY CONFIDENTIAL 42 Authentication COMPANY CONFIDENTIAL What is the USB Type-C Authentication Solution and why NXP? What is the Type-C Authentication Solution? – Tamper resistant highly secure authentication solutions to verify that Type-c peripherals , cables etc. really belong to specific OEM, enabling safe solutions and prevent counterfeiting. Why is it needed? – – – – Enables licensing revenue protection (anti counterfeiting / anti cloning) Guarantees peripheral’s safety Brand and IP protection. Enables new use cases (DRM protection, fast & safe charge) Why NXP? – NXP is the market leader in Secure Identification IC solutions providing strongest levels of market-proven and certified security, common-criteria certified design environment, production facilities and secure personalization/key insertion per die. COMPANY CONFIDENTIAL 44 Key Features of our Anti-Counterfeit Solution Dedicated tamper resistant security hardware active shield, encrypted buses and memory, SPA/DPA protection, True Random Number generation and security sensors Cryptographic engines support latest asymmetric and symmetric algorithms Tamper resistant secure keys storage for certificates and user code and data Low foot-print, low power consumption with multiple interface options. One-Wire, I2C (up to 400 Kbps), Contactless Interfaces. Host side reference code available Please contact NXP Sales Manager for more product details System Solution AC/DC Adaptor Type-C Cable Active cable & adaptor COMPANY CONFIDENTIAL 60 Interface Protectors COMPANY CONFIDENTIAL What is USB Type-C Interface Protection Solution and why NXP? What is the Type-C Interface Protection Solution? – NXP offers ESD protection and Common Mode Filters with integrated ESD protection for the new USB Type-C connector. Why is it needed? – ESD protection is required to achieve system-level ESD robustness, since USB is an external interface. Common Mode Filters are needed to avoid interference between SuperSpeed USB and the overlapping GSM/LTE/WiFi frequencies, which are needed for wireless connectivity of portable devices. Why NXP? – NXP offers ESD protection, which offer a unique combination of supporting RF signal integrity as well as true system-level ESD. NXP’s Common Mode Filters offer an extremly wide-band Common Mode suppression to cover strong rejection of all critical noise frequencies. COMPANY CONFIDENTIAL USB Type-C Product Summary COMPANY CONFIDENTIAL USB Type-C Product Status Overview Part Number CBTL02043 SWITCHES Status Two differential channel 2:1 Mux-Demux switch Production CBTL04GP043 Dual channel 2x2 crosspoint switch Production CBTL08GP053 USB Type-C High performance Crossbar Switch Sampling - Now Part Number USB REDRIVERS Status PTN36221A Single channel USB3 Redriver Production PTN36241B Dual channel USB3 Redriver Production PTN36241G Dual channel USB3 Redriver, smaller package Sampling - Now PTN36242L Dual port (four channel) USB3 Redriver Production Part Number USB PD-PHY and CC-LOGIC CONTROLLERS Status PTN5100 Type-C PD PHY and Protocol IC Sampling – Now PTN5150 Type-C CC Logic IC Sampling – July’15 Part Number USB LOAD SWITCHES Status NX5P2090 2A load switch with OCP / OVP / OTP Production NX20P5090 5A programmable OVP power switch Sampling – Now NX5P3090 3A adjustable current limit power switch Sampling – Apr’15 COMPANY CONFIDENTIAL 16 USB Type-C Product Status Overview (continued) Part Number LPC1114 LPC11E35 LPC82x LPC54101/54102 LPC5411x Part Number MICROCONTROLLERS Status Low cost, low power microcontroller Production Low cost, low power microcontroller with integrated EEPROM Sampling – Now LPC800 microcontroller family with power efficiency Production Lowest power standalone microcontrollers Production Microcontrollers with integrated audio and USB, single/dual core Sampling – Now AC/DC CONVERTERS Status TEA1836 / TEA1892 45W wall plug AC/DC converters Production TEA1936 / TEA1992 Gen II AC/DC converters Sampling – Aug’15 Part Number AUTHENTICATION Status A7101 Tamper resistant, highly secure authentication solution for Type-C Production A1006 Tamper resistant, highly secure authentication solution for Type-C Sampling – Now Part Number INTERFACE PROTECTION AND FILTERING Status PUSB3FR4 4-line protection device with ultra-low clamping, 0.29 pF Production PUSB3FR6 6-line protection device with ultra-low clamping Production PUSB3AB6 6-line protection device with ultra-low clamping Production Common mode filter and ESD protection for USB3.1 Sampling – Now PCMFxUSB3S COMPANY CONFIDENTIAL 17 Vision – Seamless Connectivity of Data, Video, Power and Security Over Single Connector High Speed Signal Transmission Smaller form factor allowing convergence of computing/mobile storage, gateway, Instrumentation, gaming, Network ect…….. New USB Type-C Connector - Tiny, Robust, Flippable, High Speed and Default Power Delivery •Signal transmission at ultra high speed supports growing data and video content •USB has good potential to lead among the technologies and become the majority / standard connector. Multi- Function USB Connector •Smaller neat form factor design drives the connector to carry multiple signals for data and video •Data, video and power over a single connector is becoming a requirement Power Delivery •Proprietary charging methods enable faster charging •USB PD extends beyond USB BC to allow up to 100W charging, power support and role swap for system power optimization •USB PD is specified to support USB connectors Security/Authentication • Authentication can be used to verify that peripherals really belong to that specific OEM to enable secure connections, prevent counterfeiting and for safety concerns (e.g. Battery charging) COMPANY CONFIDENTIAL 51 COMPANY CONFIDENTIAL 52 Business Line Interface Products - Product Line CWG June 11, 2015