SERIES - 561 / 565

advertisement
Job Name:____________________________________
INFRANOR
SERIES - 561 / 565
Fixture Type: __________________________________
Job Number: __________________________________
Distributor: ___________________________________
INFRANOR
Distributor P.O.: ________________________________
Fixture Dimensions
INFRANOR 565
INFRANOR 561
11.75”
21.00”
12.56”
12.78”
12.56”
21.00”
8.25”
13.94”
11.75”
11.06”
15.00”
18.25
0.44”dia
(4) holes
3.75”
14.75”
top view
14.31”
3.75”
0.81” dia 8.00” 4.00”
7.55”
1000W box shown
0.81” dia
Watertight cord connector
(2) supplied
(400W box: 6.5” x 15.0“ x 5.9”)
6.00”
0.44”dia
(4) holes
EPA: 2.50
FIXTURE WEIGHT: 561 - 27 LBS.
FIXTURE WEIGHT: 565 - 75 LBS.
REMOTE BOX WEIGHT: 50 LBS.
I N F R A N O R V E L A - 8 D W R I T T E N S P E C I F I C AT I O N S
HOUSING
The luminaire housing shall be cast aluminum and rectilinear in shape with
integral fins for heat dissipation. The luminaire housing, including the wire
entrance, shall be completely sealed from the outside environment. The cast
aluminum alloy shall contain less than 2/10 of 1% copper for resistance to
corrosion including marine applications.
LENS & DOORFRAME
The luminaire lens shall be clear tempered glass, 0.188” thick, thermal and
impact resistant. Lens shall be set into a cast aluminum doorframe which is
secured with (10) plated steel fasteners and sealed with a die-cut E.P.D.M. gasket
for a watertight seal.
Yoke
The luminaire yoke shall be of formed aluminum 0.375” thick and 2.50”
wide (565), 2.00” wide (561). Yoke shall allow for infinite aiming positions
within its aiming range.
REFLECTOR
The luminaire reflector module shall be of a high purity anodized or patterned
specular aluminum in a choice of forms to provide rectangular narrow, medium,
or wide beam patterns. All horizontally lamped reflector units shall be backed by
an aluminum extrusion for stability and repeatability of distribution. Metal halide
reflectors shall include Sterner’s unique Arc Stream Aligner to position the lamp’s
arc stream in the focal point to maximize lamp life, color, and overall efficiency.
All reflectors shall include Sterner’s unique lamp stabilizer to prevent lamp sag
and to maximize lamp life and overall efficiency.
ELECTRICAL MODULE
Luminaire shall be cULus listed for use in wet locations and manufactured from
UL recognized electrical components. Electrical assembly is easily accessible
through the ballast box. Each high power factor ballast is capable of starting
temperatures down to -20°F (-28.9°C) and shall be CWA. The socket shall be
a mogul-based porcelain socket with a 4KV rating (5KV for 1000HPS). Fixture
shall be equipped with a watertight connector and 3’ of 16/3 STO-W cord.
LAMP
Luminaire shall accept the following lamps:
400PMH, 1000PMH ED/BT37
1000MH ED/BT37
250HPS, 400HPS E18
1000HPS E25
REMOTE MOUNTED & ATTACHED BALLAST BOX
Ballast shall be housed in a cast aluminum housing with heat dissipating fins and
supplied with (2) watertight connectors. Ballast box shall have a cast aluminum
cover and is secured with (6) plated steel fasteners. 400PMH and 1000MH /
PMH remote box shall be capable of mounting at a distance of 200’ (based on
10-gauge wire and 1% voltage drop). 400HPS remote box shall be capable of
mounting at a distance of 50’, and 1000HPS at 75’ (includes long range starter).
The cast aluminum alloy shall contain less than 2/10 of 1% copper for resistance
to corrosion including marine applications.
FINISH
Finished parts are washed in a multistage phosphate processing system and
finished with a polyester urethane powder coat paint. Standard colors are dark
bronze, black, white, and natural aluminum. Contact factory for non-standard
colors.
701 Millennium Blvd • Greenville, SC 29607 • TEL 864.678.1000 FAX 864.678.1417 • www.sternerlighting.com
INFRANOR
In the interest of continuous product improvement, Sterner Lighting reserves the right to change specifications without notice.
1
infranor 561 / 565
ordering sequence
ORDERING SEQUENCE
O R D E R I 1N G S E Q2U E N C E
Item Sequence:
Item Sequence:
ORDER
Item Sequence:
ORDER
NUMBER:
NUMBER:
ORDER
NUMBER:
1
1
HOUSING
HOUSING
561
(remote)
561
HOUSING
3
2
3
2
LAMP
WATTAGE
3
BEAM
PATTERN
4
VOLTAGE
400PMH
RN
1000PMH
RW
RM
1000MH
250HPS
400PMH
RN
RW
400HS
400HPS
RM
1000MH
(attached)
1000HPS
RW
1000HPS
565
400HPS
Notes: 1) ‘PRL’ not available in the
‘561’ version
(attached)
Note: *‘PRL’ not available in the
‘561’ version
1000HPS
565
561
565
(attached)
(remote)
*‘PRL’
available
1Note:
. 1H
SUI SNinIthe
G
.O
HnotU
O
N‘561’
G version
q (561)
1. HOUSING
(561)
(561)
12.56"
21.00"
13.94"
3.75"
3.75"
YK
C
top view
8.25"
11.06"
8.25"
11.06"
top view
8.0" 4.0"
N
11.75"
12.56"
12.56"
15.00"
8.25"
15.00"
18.25"
3.75"
EPA: 2.50
EPA: 2.50
0.44" dia
FIXTURE
LBS.LBS.
FIXTUREWEIGHT:
WEIGHT:75 75
(4) holes.
EPA: 2.50
0.44" dia
FIXTURE WEIGHT: 75 LBS.
(4) holes.
3.75"
0.81" dia
6.00"
diaE 6.00"
OLTA
LT0.81"
AGG
44.. VVO
E
q (120)
q (277)
4
.
V
O
LTA
G
(120)
(277)E
q (208)
q (347)
q (240)
(208)
(120)
q (480)
(347)
(277)
(208)
(240)
(347)
(480)
(240)
(480)
5 .5B. ABLALLALSATS T
q5(C)*
Coil
. BCore
A L&L
AST
(C)
Core
& Coil
(Core & coil ballast is high-power
factorand
-20°F (-28.9°C).)
(Core
& coil rated
ballastfor
is high-power
(C)
Core
& Coil factor
and rated
for -20°F
(-28.9°C).)
(Core & coil ballast is high-power factor
6 rated
. M
OD
EL STYLE
and
for -20°F
(-28.9°C).)
6. MODEL STYLE
q (YK) Yoke
6(YK)
. MO
DEL STYLE
Yoke
(YK) Yoke
(PD)
(SF) Slip Fitter
3.13"3.44”
pipe tenon x 4.00" long
3.44"
To fit 2.00” (min.)
(2.38” o.D.)
T 3/4" mounting
pipe tenon x 4.00”
long
pipehardware
tenon x 4.00" long
(min.)
(min.)
Removable
3/4" mounting
pipe plug for
3/4” mounting
hardware
installing
Removable
hardware
water-tite
pipe plug for
Removableconnector
pipe
installing
plug for installing
(supplied)
water-tite
water-tite connector
connector
(supplied) (supplied)
2.06”2.06"
I.D. I.D.
4.00"
4.00"
21.00"
21.00"
q (3S)
(3S) Three
ThreeSided
Sided
4.00"
21.00"
11.41"
11.41"
(SG) Stone Guard
q (SG)
Stone
Guard
(SG)
Stone
Guard
9. GENERAL OPTIONS
9 . (FL)
G9E. Fuse
N
R
T IP
O
SN S Receptacle Luminaire
GE
ELuminaire
NA
ELR AOLPO
TN
IO
(PRL)*
Photocell
q (FL)
Fuse Luminaire
q (PRL)*Photocell
Receptacle Luminaire
(N)
Required
(SC)
(FL) Safety
Fuse Cable
Luminaire
(PRL)*Not
Photocell
Receptacle Luminaire
q (SC) Safety Cable
q (N) Not Required
Note: *‘PRL’
not available
in the ‘561’ version.
(N)
Not Required
(SC)
Safety Cable
Notes: 1) ‘PRL’ not available in the ‘561’ version
R ENote:
M *‘PRL’
A R not
Kavailable
S : in the ‘561’ version.
21.00"
4.00"
q (4S) (4S)
Four Sided
Four Sided
4.00"
21.00"
4.00"
4.00"
0.56" dia.
0.56” 6.00"
(4)
(4) bolt circle
6.00" dia.
6.00” dia.
bolt circlebolt circle
6.00"
6.00” 6.00"
2.38"
O.D.
6.25"
0.25"
6.25” 6.25"
0.25”
All components steel
welded construction
0.25"
All components
steel
All components
steel
welded construction
welded construction
(3L) Three Louver
q (3L) Three
Louver
(3L)21.00"
Three Louver
21.00"
12.56"
11.41"
12.56"
(2.00" sch. 40
steel pipe)
(2.00” sch.
40 sch. 40
(2.00"
2.38” 2.38"
steel pipe)steel pipe)
O.D. O.D.
surface base
NOT
REQUIRED
black
unless
otherwise
specified)
q (N)
Not
Required
8 . S H I E L D O P T I O N S (Standard shield finish is (N)
(Standard
shield
finish
is
black
unless
otherwise
8
.
S
H
I
E
L
D
O
P
T
I
O
N
S
(TS)
Top
Shield
(3S)
Three
Sided
(4S)
Four Sided
8 . S H I E L D O P T I O N S (Standard shield finish is black unless otherwisespecified)
specified)
4.00"
Base Pad
(Anchors supplied by others)
(PD)
q (PD) Base
Pad Base Pad
0.56"
(Anchorsby
supplied
(Anchors2.06"
supplied
others)by others)
I.D.
(4)
3.44"
Slip FitterT
q (SF) Slip(SF)
Fitters
1.16"
3/8” locking
3/8" locking
Can be mounted
bolt to 2.00" pipe (max) with
bolt
Can be mounted
2.00”
U-bolts to
(U-bolts
3.13"
be mounted
6.00"
by Can
others).
pipe (max)
with
U-bolts
5/8" pivot
to
2.00"
pipe (max)3.13”
with
bolt circle
bolt (U-bolts by U-bolts
others). (U-bolts
3/4" mounting
6.00"
5/8” pivot 5/8" pivot by others).
6.00”
hardware
bolt
bolt
3/4” mount3/4" mounting
1.50"
ing hardware
hardware
5.63"
1.50"
1.50”
3/4" mounting
1.50"
Water-tite
3.50"
5.63"
hardware
1.50”
connector
1.50"
5.63”
8.00"
3/4" mounting
3/4” mountCast ductile iron
Water-tite
3.50”
Removable
3.50"
3.00"
hardware
Water-tite
wall
bracket
and
connector
5.50"
hole plug
for
ing hardware
8.00”
1.38"
8.00"
Removable
horizontal
sector
connector
side yoke
Cast ductile
ironductile
3.50"
1/2"
set
Cast
iron
Removable
splice inspection
0.56"
3.00"
mounting
5.50”
screws
walland
bracket and
5.50"
wall bracket
hole
plug
for
cover
4.50"
Removable
hole
(4)
3.00”
0.38"
1.38" Cast ductile iron
Removable
sector
3.50”
horizontalhorizontal
sector
3.50"
1/2"
plug set
for side side
yoke yoke
1.38”
surface base
mounting
0.56” 0.56" Removable splice inspection
1/2” set screws
4.50”
cover
4.50"
mounting
(4)
0.38"
screws
Cast ductile iron
(N) NOT(4)REQUIREDsplice inspection
Cast ductile
ironbase 0.38”
surface
cover
Cast tenzalloy fitter
q (TS) (TS)
Top Shield
Top Shield
21.00"
NS
11.75"
18.25"
q (RM) Rectangular Medium
(400PMH) ED/BT37
H A L I D
E
q (400PMH)
ED/BT37
(RM)
Rectangular
Medium
(RN)
Rectangular
Narrow
q
(RW)
Rectangular
Wide
(1000MH)
ED/BT37
(400PMH) ED/BT37
q (1000MH)
ED/BT37
(RM) Rectangular
Rectangular
Medium
(RW)
Wide
SODIUM
(1000MH) ED/BT37
S o d i u m (400HPS)
E18
(RW) Rectangular Wide
SODIUM
q (250HPS)(1000HPS)
(400HPS)
E18
E25
E18
q (400HPS) E18
(1000HPS) E25
7 . M oE25
UNTING OPTIONS
q (1000HPS)
1.81"
BK
BZ
BKWH
BZ AL
BK
WH
ALBZ
NS
WH
NSAL
FINISH
8.25"
FIXTURE WEIGHT: 27 LBS.
bolt
FINISH
FL PRL1
SC
FL
PRL*
SCN
N PRL*
21.00"
12.78"
Watertight cord connector
(2) supplied
Watertight
(400W box: 6.5”
x 15.0“ xcord
5.9”)connector
(2) supplied
EPA:
2.50
(fixture
only)
EPA:
(fixture
only)
(400W
box: 2.50
6.5” x 15.0“
x 5.9”)
FIXTURE WEIGHT:
27WEIGHT:
LBS.
FIXTURE
27 LBS.
EPA:BOX
2.50
(fixture
only)
0.81" dia REMOTE BOX WEIGHT:
REMOTE
WEIGHT:
50LBS
50 LBS.
(Anchors
supplied
by others)
1.16"
(Anchors1.81"
supplied
by others)
3/8" locking
10
10
FINISH
GENERAL
OPTIONS
FL
GENERAL
SC
OPTIONS
TS 4S
3S 3L
4STS
SG
3L3S
SG4S
3L N
NSG
12.78"
8.0" 4.0"
1.16”
N
10
9
GENERAL
OPTIONS
21.00"
0.44" dia
(2) holes
0.44" dia
(2) holes
0.81"
dia
0.56"
(4)dia.
1.81”
0.56”6.00"
(4) bolt circle
6.00" dia.
6.00” bolt
dia. circle
N
(565)
WEIGHT:
50AT
LBS.
2 . 2L.ALM
WAT
T ATA
GG
E E REMOTE
33.BOX
N
AP
MP
WAT
. BBE
EA
AM
M P
PAT
TERN
q (RN)
B E A Rectanglar
Narrow
H AH
L IA
DL. EILDAEM P WAT TA G E
2
3
.
M
PAT
T
E
R
N
(RN) Rectangular Narrow
q (1000PMH) ED/BT37
supplied
(Anchors (Anchors
supplied by
others)by others)
SHIELD
OPTIONSTS
SHIELD
3S
OPTIONS
q (565)
(565)
9
9
8
SHIELD
OPTIONS
BPSF
WBPD
BP
SF
WB
PDN
SF
N PD
14.75" 1000W box shown
14.31"
14.75"
14.31"
7 .OBase
M
U
TG
I NO
GPO
T (WB)
INOSNWall
S Bracket
Plate
7 . (BP)
M
Uo
N
TN
IN
TP
IO
(Anchors supplied by others)
(Anchors supplied by others)
(BP)
(WB)bracket
Base
Plate
Wall Bracket
0.56"
q (BP)
Base
Plate
q (WB) Wall
(4)
8
8
MOUNTING
OPTIONS
BP
MOUNTING
WB
OPTIONS
YK
1000W box7.55"
shown
21.00"
13.94"
C
7
7
MOUNTING
OPTIONS
MODEL
STYLE
YK
MODEL
STYLE
C
BALLAST
7.55"
12.56"
7
6
MODEL
STYLE
BALLAST
120
208
120
240
208
277
120
240
347
208
277
480
240
347
277
480
347
480
6
6
5
BALLAST
VOLTAGE
(remote)
5
5
4
VOLTAGE
BEAM
PATTERN
RN
BEAM
RM
PATTERN
LAMP
WATTAGE
400PMH
LAMP
1000MH
WATTAGE
4
11.41"
4.00"
4.00"
2.50"
2.50"
(N) Not Required
q (N) Not
(N) Required
Not Required
10. FINISH
1 0(BK)
.1 F
N
SH
0 I.Black
F IIN
ISH
(NS) Non-Standard
(WH) White
q (BK) (BZ)
Black Dark Bronze q (WH) White
q
(NS)
Non-Standard*
(AL)
Natural
(NS) Non-Standard
(BK) Black
(WH)
White Aluminum
Note: *Please supply ship to match or
(BZ)Bronze
Dark Bronze
(AL)Aluminum
Natural Aluminum
q (BZ) Dark
q (AL) Natural
specify color for any ‘NS’ non-standard
finish
STERNER
• 701 Millennium Blvd • Greenville, SC 29607 • TEL 864.678.1000 FAX 864.678.1417 • www.sternerlighting.com
R E M ALIGHTING
RKS:
3/13
701 MILLENNIUM BOULEVARD GREENVILLE, SC 29607
2
Download