ICL-LED1600-1
JOB NAME
Pluris Multiple MB Recessed Series
LED (1) Head 1600lm 28W
CATALOG NUMBER
NOTES
TYPE
RECOGNIZED
6 5/8”
7 5/8”
5 1/16” 6 5/8”
13 1/2”
5 1/16”
6 5/8”
Cut-out: 6 1/4” x 6 1/4”
DATA PER HEAD
(3000K / 82 CRI)
Order Matrix | Example: ICL-LED160030-1-WW-FL32-I200
A
B
A
C
D
27
279
30
309
35
41
F
E
Series
-BW
-WW
ICL-LED1600 28W LED Multi-Light
B
E
Finishes 1
Black Interior / White Trim
White Interior / White Trim
CCT / CRI
F
2700K / 82 CRI
2700K / 92 CRI
3000K / 82 CRI
3000K / 92 CRI
3500K / 82 CRI
4100K / 82 CRI
-SP16
-FL24
-FL32
-FL50
G
C
Lamps
-1
LED (1) Lamp
D
Driver
blank
-27
-D10
-D1027
-DELV
-LUT1
-LUT127
-LUT
-LUT27
G
120V Non-Dimming
277V Non-Dimming
0-10V Dimming 10% 120V
0-10V Dimming 10% 277V
ELV Dimming 120V
Lutron 3-Wire Hi-Lume 1% 120V
Lutron 3-Wire Hi-Lume 1% 277V
Lutron EcoSystem 1% 120V
Lutron EcoSystem 1% 277V
-I100
-I200
-I400
-EM
-EM2
Beam
16˚ Spot
24˚ Narrow Flood
32˚ Flood
50˚ Wide Flood
Options
C-Channel Bar (pair)
Flat Bar (pair)
Architectural Bar (pair)
Remote Emergency Unit 2
Emergency Unit with
Integral Test Switch 2, 3
Notes:
1. Consult factory for special order finishes.
2. Access above ceiling required.
3. EM2 adds 2” depth.
Accessories
ICL-LED will accommodate a maximum of (2) filter media per lamp. No accessory holder required.
For use with 24°, 32°, and 50° optic.
Diffusion Filters
Color Filters
PFL-CL1-S
PFL-CL2-S
PFL-CL4-S
PL-CL5-S
PL-CL6-S
PL-CL9-S
Prismatic Spread
Linear Spread
Beam Softener
Louver
Amber Lens
Red Lens
Blue Lens
PFLMB
Black Hex
Louver
For use with 16° optic.
Diffusion Filters
Color Filters
PFL-CL1-s16
PFL-CL2-s16
PFL-CL4-S16
PL-CL5-S16
PL-CL6-S16
PL-CL9-S16
Prismatic Spread
Linear Spread
Beam Softener
LUMENS:
LUMENS PER
WATT:
16˚ SPOT
24˚ NARROW
FLOOD
32˚ FLOOD
50˚ WIDE
FLOOD
1692
1645
1591
1612
60
57
55
56
Description
The Pluris ™ Series is designed for easy
installation and fixture maintenance, with
all parts and components accessible from
below the ceiling. All lamp holders are
adjustable 360° horizontal and 30° vertical
for spot lighting in multiple directions.
Actual adjustment may vary depending on
the lamp beam spread. The Pluris ™ LED
series is offered with a new construction
frame and 1, 2, 3, or 4 lamp configurations.
LED Light Engine (Per Head)
--Nominal input power: 28W
--Delivered light output: 1692lm @ 3000K
--2700K, 3000K, 3500K and 4100K 82 CRI
--2700K and 3000K 92 CRI (R9 Value = 59)
--3 Step MacAdam (3 SDMC)
--LED mounted to die-cast / extruded
aluminum heat sink
--50,000 hours average rated life at 70%
output
Electrical System
--120V or 277V 50/60Hz input
--Class 2 power supply
--Over voltage, over current and short circuit
protection: Auto recovery
--MTBF > 100,000 hours
DIMMING
ELV, 0-10V, Lutron Hi-Lume® and
EcoSystem® available.
Louver
Amber Lens
Red Lens
Blue Lens
PFLMB-16 Black Hex
Louver
multiples L/M-0114:14 P-29
Intense Lighting | 3340. E La Palma Ave. | Anaheim, CA 92806 | Phone: 1.800.961.5321 | Fax: 1.800.961.5322 | www.intenselighting.com
Note: Specifications and dimensions subject to change without notice.
Housing
The housing is constructed of 22GA steel
powder coated black. Must be kept 3” away
from insulation. The internal wire bundles
are locked and covered with a glass sleeve.
The housing is supplied with a plate to allow
the junction box to be accessible from below
the ceiling.
Mounting
The Pluris ™ luminaires can accommodate a
½” to 1 ¼” ceiling thickness. The Pluris ™
fixture is supplied with channel brackets
that allow up-to 5” vertical adjustment.
Universal mounting brackets included.
Compatible with C-channel, flat bar,
architectural bar and EMT. Bar hangers
must be ordered separately. C-channel
are recommended for T-bar ceilings.
Architectural bar hangers are not for use in
T-bar ceilings.
Flanged Trim
Extruded trim frame includes torsion springs
for convenient installation or removal from
the housing.
Listing/Warranty
--ETL listed to US and Canadian standards
for damp locations.
--10-Year Intense LED Limited Warranty
AWARDS
--2012 Next Generation Luminaires “Recognized Winner”
JOB NAME
CATALOG NUMBER
NOTES
TYPE
ICL-LED1600
16° Spot (-SP16)
Catalog#: ICL-LED160030-1
Report #: L07121810 (-SP16)
L07121824 (-FL24)
L07121823 (-FL32)
L07121825 (-FL50)
80°
70°
1962
3923
50
7846
APPLICATION DATA:
W and L are the outer points where
the candle power drops to 50% of
maximum. FC are the initial foot
candles at the center of the beam.
W
L
C
D
FC
°
40°
10°
20°
30°
32° Flood (-FL32)
80°
70°
1042
60°
5885
Photometric Data
shown is compiled per
head. For multi-light
photometrics consult
factory.
24° Narrow Flood (-FL24)
80°
70°
944
60°
2083
50
3125
10°
20°
80°
70°
667
60°
1889
°
50
2833
40°
4167
50° Wide Flood (-FL50)
10°
20°
50°
2002
40°
3777
30°
60°
1335
°
40°
2670
30°
20°
10°
30°
Watts: 28.16
Lumens: 1692.38
LPW: 60.1
CCT: 3002
CRI: 82.61
Watts: 28.91
Lumens: 1645.02
LPW: 56.9
CCT: 3092
CRI: 83.42
Watts: 28.88
Lumens: 1590.9
LPW: 55.09
CCT: 3052
CRI: 83.2
Watts: 28.9
Lumens: 1612.21
LPW: 55.79
CCT: 3107
CRI: 83.85
Candelas at Nadir
Candelas at Nadir
Candelas at Nadir
Candelas at Nadir
Degree Candela
Degree Candela
Degree Candela
Degree Candela
0°
4°
14°
24°
34°
44°
0°
4°
14°
24°
34°
44°
0°
4°
14°
24°
34°
44°
0°
4°
14°
24°
34°
44°
7846.1
6893.33
2350.88
876.21
343.24
2.37
4166.67
4061.48
2729.14
1065.24
240.55
8.42
3777.46
3467.63
2605.11
1071.15
249.49
29.91
2412.13
2440.46
2615.94
1273.08
265.97
16.47
Illuminated width & length are based upon point at which illuminance falls to 50% of center illuminance. Recommended spacing is based
upon uniform illuminance aiming angle is the angle between the lamp axis and the perpendicular to the illuminated plane.
DD
DD
D
CC
DD
Beam width
Beam length
Distance to center of beam
Distance
Foot candles
DD
D
D
3030
oo
WW
WFCFC
LL
LL
CC
FC
L
0° HORIZONTAL
3030o o
4545o o
30o
30
o
LFCFC
C
C
LL
FC
WW
WW
W
30° HORIZONTAL
L
W
DD
30° VERTICAL
D
FC
W
L
D
C
FC
W
L
D
C
FC
W
L
ICL-LED160030-1-SP16
16° Spot
5.0’
7.5’
10’
12.5’
314
140
78.5
50.2
1.69
2.5
3.33
4.18
1.69
2.5
3.33
4.18
5.0’
7.5’
10’
12.5’
2.75
4
5.25
6.75
207
92.8
51.9
33.3
2.22
3.29
4.4
5.49
1.92
2.86
3.83
4.78
3.0’
4.0’
5.0’
6.0’
4.25
5.75
7.25
8.5
134
75.6
48.4
33.6
1.86
2.45
3.07
3.68
3.44
4.56
5.69
6.84
ICL-LED160030-1-FL24
24° Flood
5.0’
7.5’
10’
12.5’
167
74.1
41.7
26.7
2.85
4.26
5.68
7.08
2.85
4.26
5.68
7.09
5.0’
7.5’
10’
12.5’
2.25
3.25
4.25
5.5
121
53.7
30.2
14.4
3.37
5.06
6.75
8.43
3.08
4.63
6.17
7.74
3.0’
4.0’
5.0’
6.0’
3.25
4.5
5.5
6.75
104
58.6
37.5
26.1
2.52
3.36
4.19
5.01
3.5
4.68
5.84
7
ICL-LED160030-1-FL32
32° Flood
5.0’
7.5’
10’
12.5’
151
67.2
37.8
24.2
3.06
4.58
6.11
7.63
3.05
4.58
6.11
7.63
5.0’
7.5’
10’
12.5’
2.5
4
5.25
6.5
101
44.9
25.3
16.2
3.66
5.47
7.29
9.11
3.52
5.27
7.02
8.77
3.0’
4.0’
5.0’
6.0’
3
4
5
6.25
96.7
54.4
34.8
24.2
2.71
3.61
4.53
5.42
3.47
4.64
5.79
6.95
ICL-LED160030-1-FL50
50° Wide Flood
5.0’
7.5’
10’
12.5’
96.5
42.9
24.1
15.4
4.03
6.04
8.05
10.06
4.03
6.04
8.05
10.05
5.0’
7.5’
10’
12.5’
1.5
2.25
3
3.75
92.6
41.2
23.2
14.8
3.85
5.77
7.67
9.62
3.95
5.92
7.89
9.87
3.0’
4.0’
5.0’
6.0’
2.75
3.75
4.75
5.75
101
56.8
36.5
25.3
2.83
3.78
4.71
5.68
2.58
3.44
4.29
5.17
All testing was conducted in accordance with LM-79-08, Approved Method: Electrical and Photometric Measurements of Solid-State
Lighting Products as published by the Illuminating Engineering Society of North America (IESNA).
multiples L/M-0114:14 P-36
Intense Lighting | 3340. E La Palma Ave. | Anaheim, CA 92806 | Phone: 1.800.961.5321 | Fax: 1.800.961.5322 | www.intenselighting.com
Note: Specifications and dimensions subject to change without notice.
45
6060o o
60