SV7330SE
SV7330SE
SV7330SE
www.savitech-ic.com
1

Savitech SV7330SE
SV7330SE
 Seamless Bidirectional Data Switching
 Roboust ESD protection: HBM 8KV
 Low Turn-On Resistance: 4 Ω
 Ultra-
Wide Bandwidth: -3dB BW < 600MHz

Low Crosstalk: –66dB
 Extreme Low Power Consumption: 0.4uA

Single Vcc Supply: +5V+/-10%
 Control Input Pins are compatible with TTL and
5V/3.3V CMOS

Pb-free & Green Package: QSOP-16, SOP-16,
TSSOP-16
The SV7330SE is a high quality, low power, highspeed analog video switch. It features wide bandwidth, low turn-on resistance and low crosstalk that make it ideal for seamless composite and RGB
SD and HD video switching applications
It can also function as a 4-bit 1-of-2 MUX/DEMUX for other high-speed data switching applications. A single switch-enable (EN) input is used to enable or disable the switch. When EN is set at logic ‘L’, the
D-port is connected to the S-port that shows low-
Ron between D-port and S-port that enables the switch. When EN is set at logic ‘H’, the highimpedance state exists between the D and S ports that disable the switch. The select (IN) pin controls the input data path of the MUX/DEMUX. The device spec at high off- isolation, so it will maintains isolation during power down.
It is powered by a single 5V rail typically and consumes extremely low power.
IN 1
S1
A
2
S2
A
3
D
A
S1
B
4
5
S2
B
6
D
B
7
GND 8
SV7330SE
QSOP-16/SOP-16/TSSOP-16
16
15
14
13
12
11
10
9
V cc
EN
S1
D
S2
D
D
D
S1 c
S2 c
D c
PIN
S1,S2
D
IN
EN
DESCRIPTION
Analog video I/Os
Analog video
IN Select input
Switch-enable input
INPUTS
EN
L
L
H
IN
L
H
X
INPUT/OUTPUT
D
S1
S2
Z
FUNCTION
D port = S1 port
D port = S2 port
Disconnected
Ordering Code
SV7330SE-16QP-TR2
Operation Range
-40°C, +85°C
Package
QSOP-16L
Packing
Tape & Reel, 2500pcs
SV7330SE www.savitech-ic.com
2

Savitech
SV7330SE
Parameter
V
CC to GND, Supply Voltage,
Input Voltage
Storage Temperature Range
Continuous current through V
DD or GND
ESD Susceptibility: HBM
ESD Susceptibility: MM
Value
7
GND - 0.3 to (V
CC
) +0.3
-65 to +150
100
> 8000
400
Unit
V
V
°C mA
V
V
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
This integrated circuit can be damaged by ESD if you don’t pay attention to ESD protection. SAVITECH recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
SV7330SE www.savitech-ic.com
3

Savitech
(V
CC
= +4.5V, GND = 0V, T
A
= +25°C unless otherwise noted.)
SV7330SE
PARAMETER
DC CHARACTERISTICS
SYMBOL CONDITIONS
On-Resistance R
ON
V
CC
=4.5V, Vin=1V, Id=13mA
V
CC
=4.5V, Vin=2V, Id=26mA
Input High Voltage
Input Low Voltage
V
IH
V
IL
I
IH
Input High Current
Input Low Current
Analog Output Leakage
Current
Clamp Diode Voltage
DYNAMIC CHARACTERISTICS
Turn-On Time
I
IL
I
O
V
IK
T
ON
V
CC
= 5.5V, V
IN and V
EN
= V
CC
V
CC
= 5.5V, V
IN and V
EN
= 0V
V
CC
= 5.5V, V
V
D
= 1.2V/0.3V
S1 or V
S2
= 0.3V/1.2V,
I
IN
= -1.8mA
R
L
= 75Ω, C
L
= 20pF
Turn-Off Time
Off Isolation
Channel- to Channel Crosstalk
T
OFF
O
ISO
X
TALK
BW f = 10MHz f = 10MHz
–3dB Bandwidth
Input/Enable Capacitance
POWER REQUIREMENTS
C
IN f = 1MHz
Power Supply Current I
CC
Supply Current per Input @
TTL HIGH
∆I
CC
Specifications are subject to change without notice.
V
CC
= 5.5V, V
IN
= 0V or V
CC
V
CC
= 5.5V, V
IN
= 3.4V
MIN TYP MAX
2
4
5
3
1.6
-60
-66
± 1
-1
± 1
± 1
550
4
0.4
0.8
600
3
2.5
UNITS
µA mA ns ns dB dB
MHz pF
Ω
V
µA
Ω
V
µA
µA
V
SV7330SE www.savitech-ic.com
4

Savitech SV7330SE
T
ON
T
OFF
BW
X
TALK
C
ON
V
IH
V
IL
I
IH (IIL)
PARAMETER
R
ON
I
O
V
IN
V
I
V
EN
C
IN
C
OFF
D
G
D
O
P
IRR
DESCRIPTION
Resistance between source and drain with switch in the ON state
Output leakage current measured at S1, S2, and D with the switch OFF
Digital voltage at the IN pin that selects between S1 and S2 analog inputs
Voltage applied to the D or S1, S2 pins when D or S1, S2 is the switch input
A voltage that ENABLES the chip
Capacitance at the digital inputs
Capacitance at analog I/O (S1, S2, D) with switch OFF
Capacitance at analog I/O (S1, S2, D) with switch ON
Minimum input voltage for logic HIGH
Minimum input voltage for logic LOW
Input current of the digital input
Propagation delay measured between 50% of the digital input to 90% of the analog output when switch is turned ON.
Propagation delay measured between 50% of the digital input to 90% of the analog output when switch is turned OFF.
response of the switch in the ON state measured at 3dB down
Is an unwanted signal coupled from channel to channel. Measured in –dB.
X
TALK
= 20LOG V
OUT
/V
IN
. This is non-adjacent crosstalk
Magnitude variation between analog input and output pins when the switch is ON and the dc offset of composite-video signal varies at the analog input pin. In the NTSC standard, the frequency of the video signal is 3.58MHz.
Phase variation between analog input and output pins when the switch is
ON and the dc offset of composite-video signal varies at the analog input pin. In the NTSC standard, the frequency of the video signal is 3.58MHz.
Off isolation is the resistance (measured in –dB) between the input and output with the switch off (NO)
SV7330SE www.savitech-ic.com
5

Savitech
SV7330SE
SV7330SE www.savitech-ic.com
6

Savitech SV7330SE
I
Information furnished is believed to be accurate and reliable. However, SAVITECH assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SAVITECH. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SAVITECH products are not authorized for use as critical components in life support devices or systems without express written approval of SAVITECH.
The SAVITECH logo is a registered trademark of Savitech Corporation.
All other names are the property of their respective owners
© 2011 Savitech Corporation - All Rights Reserved
SV7330SE www.savitech-ic.com
7