Water, Filtration, and Disinfection Technologies
Competent, Consistent &
Compliant
Mar Cor Purification is dedicated
to providing innovative solutions
through filtration, water, and disinfection technologies.
As a wholly owned subsidiary of Cantel
Medical Corp. (NYSE:CMN), Mar Cor
Purification is uniquely positioned to
offer the medical, life science and
industrial marketplace hollow fiber
membrane filtration, complete water
purification equipment and services,
and proven sterilant products. We deliver value to our customers by improving product quality, reducing operating
costs, protecting capital investments,
and safeguarding people’s lives. For
more information on Mar Cor Purification, visit www.mcpur.com.
Medical Product Catalog Categories
Filters &
Membranes
Reverse Osmosis
Equipment
Process Pipe
& Fittings
Cleaners &
Disinfectants
Valves
Process Controls
Pumps
Storage Tanks &
Accessories
Conditioning
Equipment
Mar Cor Purification • Medical Product Catalog • 5th Edition
Mar Cor Purification
Medical Product Catalog
5th Edition
Contact Us:
We have 22 offices/service centers in many key
cities throughout North America.
To find your local Mar Cor Purification representative, go to www.mcpur.com/contact and choose
your region for locations and contact information.
www.mcpur.com
Mar Cor Purification
Corporate Headquarters
14550 28th Avenue North
Plymouth, MN 55447
Toll Free:
(800) 633-3080
Fax:
(763) 210-3868
Web: www.mcpur.com
Email:info@mcpur.com
© 2012 Mar Cor Purification. All rights reserved. P/N: 3024682 Rev.C
Competent, Consistent & Compliant
Mar Cor Purification Introduction
Mar Cor Purification, owned by Cantel Medical Corp., is a business that consists of several familiar companies integrated to offer filtration, water and disinfection technologies,
namely: Minntech Filtration Technologies Group, Mar Cor Services, Biolab Equipment,
Fluid Solutions, GE Medical Water & Gambro Water.
This combination allows us to better serve our medical & life science customers by supplying high-quality water treatment equipment with
our Mar Cor, GE Medical & Biolab line of products, while providing proven filtration and disinfection technologies through our FiberFlo®
Filters and Minncare® Cold Sterilant brands.
Medical Water Products
Mar Cor Purification is the largest supplier of hemodialysis water systems in the U.S. Mar Cor offers hemodialysis providers a turn-key
solution that is designed to make sure critical water needs are being served in compliance with applicable regulations.
Leading the Way in Heat Disinfection
Mar Cor combines pretreatment, filtration, reverse osmosis (RO), and ultrafiltration to provide the most cost effective system package. All
of Mar Cor’s systems carry a 510(k) medical device certificate from the FDA and are designed to exceed AAMI and CSA standards. Each
system is serviced from one of Mar Cor’s 22 nationwide service locations. No matter what the source water is, Mar Cor can provide a safe,
reliable system that is designed to produce water to ensure safe, high quality care for hemodialysis patients.
Mar Cor Purification
Main Offices
Life Science Water Products
Mar Cor Purification is a leading provider of complete water treatment systems and services
for the Life Science market. For over 35 years and over 1,000 installations, Mar Cor has been
providing high-purity water solutions to companies in the pharmaceutical, cosmetics, medical device, food & beverage and dialysis markets.
Mar Cor has accomplished this with their Life Science line of products, while providing proven
filtration and disinfection technologies through our FiberFlo® Filters and Minncare® Cold Sterilant brands. Mar Cor Purification has one of the largest water treatment related technical
and field support networks to support their installed systems with 22 locations across the
U.S. and Canada.
BioScience Products
Minneapolis, MN
The BioScience Products Group has been providing hollow fiber membrane filters, cold sterilant disinfectants and dry fog products for over 20 years. These products are used in many
pharmaceutical, medical and industrial applications as a key component of maintaining a
high quality filtration & disinfection environment.
Filtration Technologies include unique hollow fiber membrane technology available in FiberFlo®
brand filtration and separation devices. Disinfection Technologies include Minncare® Cold Sterilant, the most popular disinfectant used to reduce or prevent biofilm contamination of a water
treatment and distribution system.
Philadelphia, PA
Toronto, ON
Mar Cor Purification Service Center Locations
Atlanta, GA
Denver, CO
New York, NY
San Francisco, CA
Birmingham, AL
Detroit, MI
Orlando, FL
Seattle, WA
Boston, MA
Los Angeles, CA
Philadelphia, PA
Toronto, ON
Chicago, IL
Minneapolis, MN
Pittsburgh, PA
Washington, DC
Cleveland, OH
Montreal, QC
Raleigh, NC
Dallas, TX
Nashville, TN
San Antonio, TX
Mar Cor Online Resources
www.mcpur.com
Your source for all things Mar Cor Purification.
Find product information and get the latest news regarding Mar Cor
Purification products and services.
To Place an Order
Choose The Most Convenient
Way For You.
Option 1
Call: Pick up the telephone and call
1-800-633-3080 and speak with one
of our helpful customer assistants.
Our Customer Support are available
Monday through Friday 8:00AM to
8:00PM EST.
Option 2
Email: Simply email Mar Cor
Purification Customer Support at
orders@mcpur.com. Our Customer
Support are available Monday through
Friday 8:00AM to 8:00PM EST.
Option 3
Fax: Fill out the order form found in
the back of the catalog and fax it to
us any time at 484-991-0230. Our fax
machine is on 24 hours a day, 7 days
a week.
Option 4
Mail: Fill out the order form in the
back of the catalog and mail it to our
headquarters:
Mar Cor Purification
4450 Township Line Road
P.O. Box 1429
Skippack, PA 19474.
Page
3
pr ocess p ip in g & fittin gs
Page
45
val ves
Page
73
Pu mp s
Page
85
C o nditioning equ ip ment
Page
95
R everse osmo sis Equ i pment
Page 1 07
Cleaners & Disinfe ctants
Page 1 3 5
proc ess co ntrols
Page 1 47
st ora g e tanks & acc esso ries
Page 1 6 9
Pr odu ct in de x
Page 1 81
FILTERS & MEMBRANES
For Orders in the United States:
Filters & Membranes
For All International Orders:
Please contact us at 800-346-0365
or email us at info.eu@mcpur.com
Be sure to visit us on-line at
www.mcpur.com
We are here to serve you.
Thank you for choosing Mar Cor Purification.
Mar Cor Purification
4450 Township Line Road
Skippack, PA 19474-1429
U.S.A.
Tel:
(484) 991-0220
Toll Free: (800) 346-0365
Fax:
(484) 991-0230
Mar Cor Purification
14550 28th Avenue North
Plymouth, MN 55447
U.S.A.
Tel:
(484) 991-0220
Toll Free: (800) 633-3080
Fax:
(763) 210-3868
Mar Cor Purification
3250 Harvester Road - Unit 6
Burlington, ON L7N 3W9
Canada
Tel:
(905) 639-7025
Toll Free: (800) 268-5035
Fax:
(905) 639-0425
Mar Cor Europe
Sourethweg 11
6422 PC Heerlen
The Netherlands
Tel: (+31) 45 5471 471
Fax: (+31) 45 5429 695
Minntech Asia/Pacific Pte. Ltd.
438 Alecandra Road
#03-01 Alexandra Point
Singapore 119958
Tel: (+65) 6227 9698
Fax: (+65) 6225 6848
©2012 Mar Cor Purification. All rights reserved. P/N:3024682 Rev.C
Published 1/2013
Mar Cor P uri f i cati on / www.mcpur.com /
800-633-3080
1
Terms & Conditions
The items found in this Catalog are subject to the Mar Cor Purification’s current Terms and Conditions of Sale. To
request an open account with Mar Cor Purification, Inc., please submit a completed Credit Application. Both of
these documents can be found in the Document Library on our website at www.mcpur.com. If you have any further
questions, please contact Customer Support at 800-633-3080.
2
800-633-3080 / www.mcpur.com / Mar Cor Purification
F I LT ER S & MEMBRA NES
Filters & Membranes
Mar Cor P uri f i cati on / www.mcpur.com /
800-633-3080
3
800-633-3080 / www.mcpur.com / Mar Cor Purification
2 3 58
200
10
(Hyperfiltration)
50
80
100
Herbicide
Pesticide
Gelatin
Colloidal Silica
Virus
MICROFILTRATION
Asbestos
Cryptosporidium
Blue Indigo Dye
Latex/Emulsion
Mist
Human Hair
Pollen
2
Ion Ex.
Resin
Bead
Granular
Activated Carbon
Beach Sand
2 3 58 PARTICLE FILTRATION
Giardia
Cyst
Coal Dust
Red
Blood
Cells
Milled Flour
A.C. Fine Test Dust
Bacteria
Pin
Point
2 3 58
Yeast Cells
2 3 58 104105106107
Paint Pigment
500,000
Tobacco Smoke
Carbon Black
ULTRAFILTRATION
NANOFILTRATION
1000
100,000
Albumin Protein
Endotoxin/Pyrogen
Synthetic
Dye
Sugar
REVERSE OSMOSIS
Metal Ion
Atomic
Radius
30
1000 10,00020,000
20
Aqueous Salts
100
Macro Particle Range
Visible to Naked Eye
0.0010.010.1 1.0 10100 1000
Note: 1 Micron (1x10-6 Meters) = 4x10-5 Inches (0.00004 Inches)
1 Angstrom Unit = 10-10 Meters = 10-4 Micrometers (Microns)
Process For
Separation
Relative
Size of
Common
Materials
(Saccharide Type-No
Approx. Molecular Wt.
(Log Scale)
Angstrom Units 1
(Log Scale)
Micrometers
Micro Particle Range
Optical Microscope
Macro Molecular Range
Molecular Range
Ionic Range
Scanning Electron Microscope
ST Microscope
Filtration Matrix
F I LT ER S & MEMBRA NES
4
Water Quality Standards
Standard Specifications for Reagent Water
ASTM Type
I
II
III
IV
Conductivity @ 25ºC (micromhos/cm) 0.056
1.0
0.25
5.0
Resistivity @ 25ºC (Megohms-cm)
18
1.0
4.0
0.2
Total Silica (µg/L)
3
3
500
—
Total Organic Carbon (µg/L)
100
50
200
—
Chlorides (µg/L)
1
5
10
50
Sodium (µg/L)
1
5
10
50
pH*
—
—
—
5.0-8.0
Type A
Type B
Type C
Max Heterotropic Bacteria Count 10/1000 mL 10/100 mL100/10 mL
Endotoxin, EU/mL
< 0.03
0.25
N/A
*The measurement of pH in Type I, II, and III reagent water has been eliminated
because these grades of water do not contain constituents in sufficient quantity to alter pH.
COLLEGE OF AMERICAN PATHOLOGISTS
NATIONAL COMMITTEE FOR CLINICAL LABORATORY STANDARDS
Standard Specification for Reagent Water
CAP/NCCLS Type
I
II
III
Conductivity @ 25°C
0.1
1.0
10
(micromhos/cm)
Resistivity @ 25°C
10
1.0
0.1
(megohms-cm)
0.050.1 1.0
Silicate (mg/L SiO2)
pH
—
—
5.0- 8.0
Bacterial Growth (cfu/mL)
10a
1000
—
Particulate Matter
0.22 µm Filterb
N/A
N/A
OrganicsActivated Carbonb
N/A
N/A
aPreferably, Type I water should be bacteria free.
bThese specifications are process specifications and are not measured by the end-user.
ASSOCIATION FOR THE ADVANCEMENT
OF MEDICAL INSTRUMENTATION (AAMI)
Hemodialysis Water Quality ANSI/AAMI/ISO 13959
Maximum allowable chemical contaminant levels
in water used to prepare dialysate and concentrates from powder at a dialysis facility and to
reprocess dialyzers for multiple usea.
Contaminant
Aluminum
Antimony
Arsenic
Barium
Beryllium
Cadmium
Calcium
Total Chlorine
Chromium
Copper
Fluoride
Lead
Magnesium
Mercury
Nitrate (as N)
Potassium
Selenium
Silver
Sodium
Sulfate
Thallium
Zinc
Max Concentration (mg/L)b
0.01
0.006
0.005
0.10
0.0004
0.001
2 (0.05 mmol/l)
0.10
0.014
0.10
0.20
0.005
4 (0.05 mmol/l)
0.0002
2.00
8 (0.05 mmol/l)
0.09
0.005
70 (0.05 mmol/l)
100
0.002
0.10
F I LT ER S & MEMBRA NES
AMERICAN SOCIETY FOR TESTING AND MATERIALS
a The physician has the ultimate responsibility for
ensuring the quality of water used for dialysis.
b Unless otherwise noted.
Water Bacteriology/Endotoxins
Product water used to prepare dialysate or concentrates from powder at a dialysis facility or to reprocess dialyzers for multiple use, should contain a total
viable microbial count of less than 100 CFU/mL and an endotoxin concentration of less than 0.25 EU/mL. The action level for the total viable microbial
count in the product water shall be 50 EU/mL and the action level for the endotoxin concentration shall be 0.125 EU/mL. If these action levels are observed in the product water, corrective measures, such as disinfection and retesting, shall be taken promptly to reduce the levels to an acceptable range.
Pharmaceutical PHARMACOPEIA Water STANDARDS
Purified Water
WFI (and Highly Purified)
USP
Ph Eur
USP
Ph Eur
Conductivity
<1.3 µS/cma
<4.3 µS/cm
<1.3 µS/cma
<1.1 µS/cm
temp dependent
temp dependent
temp dependent
temp dependent
Bacteria
<100 cfu/ml
<100 cfu/ml
<10 cfu/100 ml
<10 cfu/100 ml
Endotoxin
<0.25 IU / mlc
<0.25 EU / ml
<0.25 IU / ml
TOC
<0.5 mg/l
<0.5 mg/l
<0.5 mg/lb
Nitrates
<0.2 ppm
<0.2 ppm
Heavy Metals
<0.1 ppm
<0.1 ppm
Aluminum
<10 µg/mlc
<10 µg/mlc
USP = United States Pharmacopeia
a
Offline conductivity measurements possible.
b
Or pass oxidizable substances test.
c
Only for use in dialysis solutions.
Ph Eur = European Pharmacopeia
Note: These standards reflect currently published public information and are current at the time of publication.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
5
Water Quality Standards
F I LT ER S & MEMBRA NES
Volume1 U.S. Gallon (gal) 1 U.S. Gallon (gal) 1 Cubic Foot (ft3)
1 Cubic Foot (ft3)
1 Cubic Meter (m3) 1 U.S. Ounce (oz) =
=
=
=
=
=
231 Cubic Inches (in3)
3.785 Liters (l)
7.48 U.S. Gallons (gal)
1728 Cubic Inches (in3)
35.3 Cubic Feet (ft3)
29.57 Milliliters (ml)
Density1 U.S. Gallon (gal) 1 Cubic Foot (ft3) =
=
8.33 Lb. Water
62.3 Lb. Water
Temperature Absolute Temperature
°F = (°C x 9/5) + 32 °K =
°C + 273
°C = (°F - 32) x 5/9 °R =
°F + 460
Mass
1 Lb 1 Lb 1 Kg = 453.6 Grams (g.) = 7000 Grains (gr.)
=
2.205 lb.
Pressure
1 Atmosphere 1 Atmosphere psia (absolute) 14.7 psi 9.92 In. Hg 1 Kg/cm2
1 K Pa =
0.4536 Kilograms (Kg)
=
=
=
=
=
=
=
14.7 (psi)
101.325 Kilo Pascal (KPa)
psig (gauge) + 14.7
29.92 Inches Hg
33.83 Ft. H2O
14.223 psi
0.145 psi
Total Dissolved Solids Concentration
1 Grains Per Gallon (gr/gal) =
1 Grains Per Gallon as NaCl =
1 Part Per Million (ppm) =
1 ppm as NaCl =
1 ppm =
=
1 ppb =
17.1 Parts Per Million (ppm)
0.85 Grains Per Gallon as CaCO3
1 Milligram Per Liter (mg/l)
0.85 ppm as CaCO3
1,000 Parts Per Billion (ppb) 1,000,000 Parts Per Trillion (ppt)
1 Microgram Per Liter (µg/l)
Resistivity/Conductivity
ohm-cm =
1 =
mho/cm
megohm-cm = 1,000,000 ohms
megohm-cm = 1 =
micromhos/cm 1
Siemens/cm
1
microSiemens/cm
Ion Exchange Capacity
Cartridge Grain Capacity = Gallons Processed
Total Dissolved Solids (Grains/Gal)
Cartridge Grain Capacity x 17.1 = Gallons Processed
Total Dissolved Solids (ppm)
Cartridge Grain Capacity x 64.7 = Liters Processed
Total Dissolved Solids (ppm)
6
Water Quality
Conversion Chart
Commonly Used Conversions
For PURE WATER
800-633-3080 / www.mcpur.com / Mar Cor Purification
Total
ConductivityDissolvedGrains Per
Resistivity
(RO)
Solids (TDS)Gallon
(DI)
Microsiemens/cmPPM (GPG)
ohms/cm
Micromhos/cm
as CaCO3
as CaCO3
18,000,000
10,000,000
5,000,000
2,000,000
1,000,000
500,000
250,000
100,000
50,000
25,000
10,000
9,000
8,000
7,000
6,000
5,500
5,000
4,500
4,000
3,500
3,000
2,500
2,000
1,500
1,400
1,200
1,000
800
600
500
400
300
200
100
0.05
0.1
0.2
0.5
1
2
4
10
20
40
100
111.1
125
142.9
166.7
181.8
200
222.2
250
285.7
333.3
400
500
666.6
714.2
833.3
1,000
1,250
1,666
2,000
2,500
3,333
5,000
10,000
DI = DeionizationRO = Reverse Osmosis
0.028
0.04
0.13
0.25
0.5
1
2
5
10
20
50
56
63
72
83
91
100
111
125
143
166
200
250
333
357
416
500
625
833
1,000
1,250
1,667
2,500
5,000
0.001
0.002
0.007
0.014
0.03
0.06
0.12
0.29
0.58
1.17
2.92
3.27
3.68
4.21
4.85
5.3
5.8
6.5
7.3
8.4
9.8
11.7
14.6
19.5
20.9
24.3
29.2
36.5
48.7
58.5
73.1
97.5
146.2
292.4
FiberFlo Depth Cartridge Filters
®
F I LT ER S & MEMBRA NES
M I C RO FIB E R
The FiberFlo Microfiber cartridge filters offer increased dirt holding capacity, long service life, low initial pressure drops, maximum throughput and comprehensive selection
of pore sizes. The unique manufacturing process gives them superior structure. The
polypropylene microfiber is suitable for potable water filtration, food processing applications, along with a variety of industrial chemicals.
Features
• Greater void volume than resin bonded or wound cartridge.
• Homogeneous high purity media. Fibers free of residual extrusion oils,
surfactants, antistatic agents and resin binders.
• Fibers thermally bonded — dimensionally stable filter media.
• Stratified pore structure allows separation of solids along a size gradient.
• Hydrophobic media.
• High efficiency media.
• Easily ground into powder or incinerated.
Benefits
• Increased dirt holding capacity. Longer service life. Lower initial pressure drop.
• Meets FDA requirements for food contact. Will not cause foaming in process stream.
• Reduced fiber migration. Micron rating not altered as differential pressure increases.
Rigid, highly porous cartridge does not require a support core.
• Results in particle entrapment throughout depth of media reducing surface blinding and increasing dirt holding capacity.
• Filter will absorb undissolved and non-emulsified oil out of liquid, air or gas streams.
• Will filter out large percentage of contaminant on a single pass. Nor dependent on the filter “cake” to improve particle retention.
• Reduced waste volume.
Specifications
0.45
PRESSURE DROP (psid)
0.4
1 µm
0.35
0.3
5 µm
0.25
10 µm
0.2
25 µm
0.15
50 µm
75 µm
100 µm
0.1
0.05
0
0
1
2
3
4
5
WATER FLOW RATE @25 C (gpm)
Typical Water Flow Rate
per 10-inch (25 cm) micro-fiber cartridge -X no end caps
6
PRESSURE DROP (psid)
Lengths (in inches)
9-3/4, 10, 20, 30, and 40.
Differential Pressure
Maximum: 50 PSIG
Recommended Change Out: 10-15 PSIG
Initial: 1-3 PSIG
Operating Temperature
Maximum Continuous: 200°F.
O-Ring or Flat Gasket Material
Silicone, Viton®, Buna-N, ERR, Neoprene
6
1 µm
5
Micron Ratings
1, 3, 5, 10, 25, 50, 75, 100, and 150.
Compliance of polypropylene Microfiber Cartridges
Polypropylene microfiber media, using a base homopoylmer
resin, is in compliance with the appropriate guidelines outlined by the U.S.
Food and Drug Administration. Meets FDA requirement outlined in the
CRF, Title 21, Section 177.1520 (a), (1) and Section 177.1520 (c), (1.1).
Cartridges with and without end caps are certified by the NSF International under ANSI/NSF Standard 42 for replacement parts.
Cartridges meet the requirement of the USP Class VI plastics test as
demonstrated by USP Biological Reactivity Tests, In Vivo.
4
E nd - F itting O ptions
3
5 µm
2
10 µm
1
0
0
1
2
3
4
5
6
25 µm
50 µm
75 µm
100 µm
WATER FLOW RATE @25 C (gpm)
Codes Description
A
SOE-222 O-ring/Solid End Cap B
SOE-222 O-ring/Fin
C
SOE-226 O-ring/Fin
D
DOE-Flat Gasket / Flat Gasket
X
DOE — Standard
Std Reference
Code 3
Code 4
Code 5
Code DOE
X Model
(No end caps)
Typical Water Flow Rate
per 10-inch (25 cm) micro-fiber cartridge with end caps
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
7
FiberFlo Depth Cartridge Filters
®
F I LT ER S & MEMBRA NES
MI C RO F IB E R
FIBERFLO MICROFIBER FILTERS
(NO END CAPS)
PART
NUMBER
E nd - F itting O ptions
Codes Description
A
SOE-222 O-ring/Solid End Cap B
SOE-222 O-ring/Fin
C
SOE-226 O-ring/Fin
D
DOE-Flat Gasket / Flat Gasket
X
DOE — Standard
Std Reference
Code 3
Code 4
Code 5
Code DOE
X Model
(No end caps)
Model
Number
MICRON LENGTHQUANTITY
RATING
(IN.)
PER CASE
1 Micron Microfiber Filter - Standard Double Open End
275-10-540
FM-001-975-X
1
9.75
275-10-556
FM-001-10-X
1
10
275-10-596
FM-001-20-X
1
20
275-10-636
FM-001-30-X
1
30
275-10-676
FM-001-40-X
1
40
3 Micron Microfiber Filter - Standard Double Open End
275-10-539
FM-003-975-X
3
9.75
275-10-555
FM-003-10-X
3
10
275-10-595
FM-003-20-X
3
20
275-10-635
FM-003-30-X
3
30
275-10-675
FM-003-40-X
3
40
5 Micron Microfiber Filter - Standard Double Open End
275-10-538
FM-005-975-X
5
9.75
275-10-554
FM-005-10-X
5
10
275-10-594
FM-005-20-X
5
20
275-10-634
FM-005-30-X
5
30
275-10-674
FM-005-40-X
5
40
10 Micron Microfiber Filter - Standard Double Open End
275-10-553
FM-010-10-X
10
10
275-10-593
FM-010-20-X
10
20
275-10-633
FM-010-30-X
10
30
275-10-673
FM-010-40-X
10
40
25 Micron Microfiber Filter - Standard Double Open End
275-10-552
FM-025-10-X
25
10
275-10-592
FM-025-20-X
25
20
275-10-632
FM-025-30-X
25
30
275-10-672
FM-025-40-X
25
40
50 Micron Microfiber Filter - Standard Double Open End
275-10-551
FM-050-10-X
50
10
275-10-591
FM-050-20-X
50
20
275-10-631
FM-050-30-X
50
30
275-10-671
FM-050-40-X
50
40
75 Micron Microfiber Filter - Standard Double Open End
275-10-550
FM-075-10-X
75
10
275-10-590
FM-075-20-X
75
20
275-10-630
FM-075-30-X
75
30
275-10-670
FM-075-40-X
75
40
100 Micron Microfiber Filter - Standard Double Open End
275-10-549
FM-100-10-X
100
10
275-10-589
FM-100-20-X
100
20
275-10-629
FM-100-30-X
100
30
275-10-669
FM-100-40-X
100
40
150 Micron Microfiber Filter - Standard Double Open End
275-10-548
FM-150-10-X
150
10
275-10-588
FM-150-20-X
150
20
275-10-628
FM-150-30-X
150
30
275-10-668
FM-150-40-X
150
40
FILTERS ARE SOLD AND SHIPPED IN CASE QUANTITIES.
8
800-633-3080 / www.mcpur.com / Mar Cor Purification
30
30
15
15
15
30
30
15
15
15
30
30
15
15
15
30
15
15
15
30
15
15
15
30
15
15
15
30
15
15
15
30
15
15
15
30
15
15
15
FiberFlo Depth Cartridge Filters
®
F I B E R F L O M I C R O F I B E R filters
(WITH END CAPS) continued
F I B E R F L O M I C R O F I B E R filters
(WITH END CAPS)
PART
NUMBER
Model
Number
MICRON
RATING
LENGTHQUANTITY
(IN.)
PER CASE
PART
NUMBER
Model
Number
MICRON
RATING
LENGTHQUANTITY
(IN.)
PER CASE
1 Micron Microfiber Filter
275-10-565
FM-001-10-A
275-10-605
FM-001-20-A
275-10-645
FM-001-30-A
275-10-685
FM-001-40-A
1
1
1
1
10
20
30
40
30
15
15
15
10 Micron Microfiber Filter
275-10-562
FM-010-10-A
275-10-602
FM-010-20-A
275-10-642
FM-010-30-A
275-10-682
FM-010-40-A
10
10
10
10
10
20
30
40
30
15
15
15
275-10-570
275-10-610
275-10-650
275-10-690
FM-001-10-B
FM-001-20-B
FM-001-30-B
FM-001-40-B
1
1
1
1
10
20
30
40
30
15
15
15
FM-010-10-B
FM-010-20-B
FM-010-30-B
FM-010-40-B
10
10
10
10
10
20
30
40
30
15
15
15
275-10-575
275-10-615
275-10-655
275-10-695
FM-001-10-C
FM-001-20-C
FM-001-30-C
FM-001-40-C
1
1
1
1
10
20
30
40
30
15
15
15
275-10-572
275-10-612
275-10-652
275-10-692
FM-010-10-C
FM-010-20-C
FM-010-30-C
FM-010-40-C
10
10
10
10
10
20
30
40
30
15
15
15
275-10-580 FM-001-10-D
275-10-620
FM-001-20-D
275-10-660
FM-001-30-D
275-10-700 FM-001-40-D
3 Micron Microfiber Filter
275-10-564
FM-003-10-A
275-10-604
FM-003-20-A
275-10-644
FM-003-30-A
275-10-684
FM-003-40-A
1
1
1
1
10
20
30
40
30
15
15
15
10
10
10
10
10
20
30
40
30
15
15
15
3
3
3
3
10
20
30
40
30
15
15
15
275-10-577 FM-010-10-D
275-10-617
FM-010-20-D
275-10-657
FM-010-30-D
275-10-697
FM-010-40-D
25 Micron Microfiber Filter
275-10-561
FM-025-10-A
275-10-601
FM-025-20-A
275-10-641
FM-025-30-A
275-10-681
FM-025-40-A
25
25
25
25
10
20
30
40
30
15
15
15
FM-003-10-B
FM-003-20-B
FM-003-30-B
FM-003-40-B
3
3
3
3
10
20
30
40
30
15
15
15
FM-025-10-B
FM-025-20-B
FM-025-30-B
FM-025-40-B
25
25
25
25
10
20
30
40
30
15
15
15
FM-003-10-C
FM-003-20-C
FM-003-30-C
FM-003-40-C
3
3
3
3
10
20
30
40
30
15
15
15
275-10-571
275-10-611
275-10-651
275-10-691
FM-025-10-C
FM-025-20-C
FM-025-30-C
FM-025-40-C
25
25
25
25
10
20
30
40
30
15
15
15
275-10-579 FM-003-10-D
275-10-619
FM-003-20-D
275-10-659
FM-003-30-D
275-10-699
FM-003-40-D
5 Micron Microfiber Filter
275-10-563
FM-005-10-A
275-10-603
FM-005-20-A
275-10-643
FM-005-30-A
275-10-683
FM-005-40-A
3
3
3
3
10
20
30
40
30
15
15
15
FM-025-10-D
FM-025-20-D
FM-025-30-D
FM-025-40-D
25
25
25
25
10
20
30
40
30
15
15
15
5
5
5
5
10
20
30
40
30
15
15
15
FM-005-10-B
FM-005-20-B
FM-005-30-B
FM-005-40-B
5
5
5
5
10
20
30
40
30
15
15
15
FM-005-10-C
FM-005-20-C
FM-005-30-C
FM-005-40-C
5
5
5
5
10
20
30
40
30
15
15
15
275-10-569
275-10-609
275-10-649
275-10-689
275-10-574
275-10-614
275-10-654
275-10-694
275-10-568
275-10-608
275-10-648
275-10-688
275-10-573
275-10-613
275-10-653
275-10-693
275-10-578 FM-005-10-D
5
275-10-618
FM-005-20-D
5
275-10-658
FM-005-30-D
5
275-10-698
FM-005-40-D
5
275-10-567
275-10-607
275-10-647
275-10-687
275-10-566
275-10-606
275-10-646
275-10-686
275-10-576
275-10-616
275-10-656
275-10-696
F I LT ER S & MEMBRA NES
M I C RO FIB E R
E nd - F itting O ptions
Codes
A
B
C
D
Description
Single Open-End, 222 o-ring, flat bottom
Single Open-End, 222 o-ring, with fin
Single Open-End, 226 o-ring, with fin
Double Open-End, flat gasket
Std Reference
Code 3
Code 4
Code 5
Code DOE
FILTERS ARE SOLD AND SHIPPED IN CASE QUANTITIES.
10
30
20
15
30
15
40
15
continued next column
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
9
FiberFlo Depth Cartridge Filters
®
F I LT ER S & MEMBRA NES
MI CRO F IB E R - H igh p erformanc e
The FiberFlo FMHP Microfiber Filter Cartridges are highly porous prefilters with
a graded pore structure. Particles are captured throughout the depth of the
polypropylene media. The course filtration layers on the outside of the filter are
designed to entrap larger particulates without prematurely binding the filter
medium. High efficiency fine particle retention takes place in the absolute filtration
layers located near the core. This unique design results in a high capacity for dirt
loading, low pressure drops, high flow rates and long service life.
With high performance filtration down to 1 micron, FMHP cartridges are ideal for
high purity applications in the pharmaceutical, biotech, medical, dialysis, food and
beverage, and other industries desiring high performance filtration.
FiberFlo FMHP cartridges are composed of continuous length polypropylene
microfibers that are thermally bonded to each other with no bonding resins or
adhesives. The microfibers surround a polypropylene core that gives the FMHP
filters exceptional strength. The FMHP cartridges are highly resistant to collapse,
channeling, and bypass which can result from high differential pressures, pulsating
flow, or pressure surges.
Features
12
10
8
6
4
25 µm
2
0
1
2
3
4
5
6
7
8
9
10
WATER FLOW RATE (gpm)
FMHP Water Flow Vs. Pressure Drop
Specifications
Standard Cartridge Dimensions:
Available in nominal lengths of 10, 20, 30 and 40,
2.5” outside diameter.
Micron Ratings:
1, 3, 5, 10, 25.
Suggested Differential Pressures:
35 PSIG Maximum
15 PSIG Optimum Change-Out Pressure Drop
Operating Temperature:
200°F max. Continuous
1 µm
3 µm
5 µm
18 µm
10
DELTA P (psid)
• Thermally bonded microfibers formed into a highly porous and
rigid seamless tube with fixed-size pores.
• 100% polypropylene microfiber construction for exceptional
cleanliness, low total organic carbon (TOC) content and a fast
rinse-up in 18 megohm D.I. water for applications with stringent
cleanliness requirements.
• No foaming because pure polypropylene microfibers have no
extrusion oils, surfactants or antistatic chemicals.
• The FMHP cartridges are extremely resistant to collapse,
channeling and bypass. The filter medium will not compress
and unload trapped contaminants.
• The hydrophobic surfaces absorb oil from air, gas and
aqueous streams.
• FMHP cartridges meet FDA regulations for food contact under
the Code of Federal Regulations, title 21, section 177.1520.
• Available with a variety of end fittings and sealing options
(SOE/DOE) and O-ring or flat gaskets, for bypass-free filtration.
E nd - F itting O ptions
Codes
A
B
C
D
800-633-3080 / www.mcpur.com / Mar Cor Purification
Description
Single Open-End, 222 o-ring, flat bottom
Single Open-End, 222 o-ring, with fin
Single Open-End, 226 o-ring, with fin
Double Open-End, flat gasket
Std Reference
Code 3
Code 4
Code 5
Code DOE
FiberFlo Depth Cartridge Filters
®
F I B E R F LO H I G H P E R F O R M A N C E F I LT E R S
(WITH END CAPS)
part
number
model
Number
MICRON
RATING
F I B E R F LO H I G H P E R F O R M A N C E F I LT E R S
(WITH END CAPS)
LENGTH
(IN.)
QUANTITY
PER CASE
1 Micron High Performance Microfiber Filter
Part
Number
model
Number
MICRON
RATING
LENGTH
(IN.)
QUANTITY
PER CASE
10 Micron High Performance Microfiber Filter
275-15-155
FMHP-001-10-A
1
10
30
275-15-167
FMHP-010-10-A
10
10
30
275-15-175
275-15-195
FMHP-001-20-A
1
20
15
275-15-215
FMHP-001-30-A
FMHP-001-40-A
1
1
30
40
15
15
275-15-187
275-15-207
275-15-227
FMHP-010-20-A
FMHP-010-30-A
FMHP-010-40-A
10
10
10
20
30
40
15
15
15
275-15-156
275-15-176
FMHP-001-10-B
FMHP-001-20-B
1
1
10
20
30
15
275-15-196
275-15-216
FMHP-001-30-B
FMHP-001-40-B
1
1
30
40
15
15
275-15-168
275-15-188
275-15-208
275-15-228
FMHP-010-10-B
FMHP-010-20-B
FMHP-010-30-B
FMHP-010-40-B
10
10
10
10
10
20
30
40
30
15
15
15
275-15-157
275-15-177
275-15-197
275-15-217
FMHP-001-10-C
FMHP-001-20-C
FMHP-001-30-C
FMHP-001-40-C
1
1
1
1
10
20
30
40
30
15
15
15
275-15-169
FMHP-010-10-C
10
10
30
275-15-189
275-15-209
275-15-229
FMHP-010-20-C
FMHP-010-30-C
FMHP-010-40-C
10
10
10
20
30
40
15
15
15
275-15-158
275-15-178
FMHP-001-10-D
FMHP-001-20-D
1
1
10
20
30
15
275-15-198
275-15-218
FMHP-001-30-D
FMHP-001-40-D
1
1
30
40
15
15
275-15-170
275-15-190
275-15-210
275-15-230
FMHP-010-10-D
FMHP-010-20-D
FMHP-010-30-D
FMHP-010-40-D
10
10
10
10
10
20
30
40
30
15
15
15
3 Micron High Performance Microfiber Filter
F I LT ER S & MEMBRA NES
M I C RO FIB E R - H ig h p erformanc e
25 Micron High Performance Microfiber Filter
275-15-159
FMHP-003-10-A
3
10
30
275-15-171
FMHP-025-10-A
25
10
30
275-15-179
275-15-199
275-15-219
FMHP-003-20-A
FMHP-003-30-A
FMHP-003-40-A
3
3
3
20
30
40
15
15
15
275-15-191
275-15-211
275-15-231
FMHP-025-20-A
FMHP-025-30-A
FMHP-025-40-A
25
25
25
20
30
40
15
15
15
275-15-160
275-15-180
275-15-200
275-15-220
FMHP-003-10-B
FMHP-003-20-B
FMHP-003-30-B
FMHP-003-40-B
3
3
3
3
10
20
30
40
30
15
15
15
275-15-172
275-15-192
275-15-212
275-15-232
FMHP-025-10-B
FMHP-025-20-B
FMHP-025-30-B
FMHP-025-40-B
25
25
25
25
10
20
30
40
30
15
15
15
275-15-161
275-15-181
275-15-201
275-15-221
FMHP-003-10-C
FMHP-003-20-C
FMHP-003-30-C
FMHP-003-40-C
3
3
3
3
10
20
30
40
30
15
15
15
275-15-173
275-15-193
275-15-213
275-15-233
FMHP-025-10-C
FMHP-025-20-C
FMHP-025-30-C
FMHP-025-40-C
25
25
25
25
10
20
30
40
30
15
15
15
275-15-162
275-15-182
275-15-202
275-15-222
FMHP-003-10-D
FMHP-003-20-D
FMHP-003-30-D
FMHP-003-40-D
3
3
3
3
10
20
30
40
30
15
15
15
275-15-174
275-15-194
275-15-214
275-15-234
FMHP-025-10-D
FMHP-025-20-D
FMHP-025-30-D
FMHP-025-40-D
25
25
25
25
10
20
30
40
30
15
15
15
5 Micron High Performance Microfiber Filter
275-15-163
FMHP-005-10-A
5
10
30
275-15-183
275-15-203
5
5
20
30
15
15
275-15-223
FMHP-005-20-A
FMHP-005-30-A
FMHP-005-40-A
5
40
15
275-15-164
275-15-184
FMHP-005-10-B
FMHP-005-20-B
5
5
10
20
30
15
275-15-204
FMHP-005-30-B
5
30
15
275-15-224
FMHP-005-40-B
5
40
15
275-15-165
275-15-185
275-15-205
FMHP-005-10-C
FMHP-005-20-C
FMHP-005-30-C
5
5
5
10
20
30
30
15
15
275-15-225
FMHP-005-40-C
5
40
15
275-15-166
FMHP-005-10-D
5
10
30
275-15-186
275-15-206
FMHP-005-20-D
FMHP-005-30-D
5
5
20
30
15
15
275-15-226
FMHP-005-40-D
5
FILTERS ARE SOLD AND SHIPPED IN CASE QUANTITIES.
40
15
continued next column
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
11
Depth Filter Cartridges
F I LT ER S & MEMBRA NES
H YTRE X ®
HYTREX depth filters provide several unique advantages in cartridge filtration. They are true depth filters that hold particles throughout
the entire depth of the filter media. Constructed of polypropylene microfibers thermally bonded to each other, the filters are completely
self-supporting, will not shed fibers and will not “unload” particles under pressure surges. Since the filters are 100% polypropylene,
they are FDA compliant for food and beverage contact and have wide chemical compatibility. The unique computer-controlled
manufacturing process ensures consistent performance and quality.
H Y T R E X F I LT E R S
PART
NUMBER
REFERENCE
NUMBER
PRODUCT
DESCRIPTION
MICRON FILTER LENGTH
RATING
(INCHES)
QUANTITY
PER CASE
275-10-037
-
GX10-9-3/4
10
9 3/4
40
275-10-038
-
GX05-9-3/4
5
9 3/4
40
275-10-040
-
GX01-9-3/4
1
9 3/4
40
ME40696
275-10-046
GX05-9-7/8
5
9 7/8
40
ME40695
275-10-048
GX01-9-7/8
1
9 7/8
40
ME40250
275-10-053
GX10-10
10
10
40
ME40063
275-10-054
GX05-10
5
10
40
275-10-056
-
GX01-10
1
10
40
275-10-093
-
GX10-20
10
20
20
ME40170
275-10-094
GX05-20
5
20
20
ME40443
275-10-096
GX01-20
1
20
20
P u rtre x
tm
PURTREX meets the requirements of the FDA for food and beverage contact as there are
no wetting agents, solvents, or binders used in the manufacturing process. An automated,
consistent manufacturing process assures reliable, repeatable performance in every filter.
Purtrex filters provide exceptional dirt-holding capability which translates into longer life and
fewer change-outs than many existing string wound or resin bonded filters. This product
is an outstanding value for general purpose, noncritical applications, where long life, high
purity and low change-out frequency are required.
P U R T R E X F I LT E R S
PART
NUMBER
12
REFERENCE
NUMBER
PRODUCT
DESCRIPTION
MICRON FILTER LENGTH
RATING
(INCHES)
QUANTITY
PER CASE
275-20-005
-
PX10-9-3/4
10
9 3/4
40
275-20-006
-
PX05-9-3/4
5
9 3/4
40
275-20-008
-
PX01-9-3/4
1
9 3/4
40
275-20-013
-
PX10-9-7/8
10
9 7/8
40
ME42112
275-20-014
PX05-9-7/8
5
9 7/8
40
275-20-016
-
PX01-9-7/8
1
9 7/8
40
40
ME42110
275-20-021
PX10-10
10
10
ME42107
275-20-022
PX05-10
5
10
40
ME42111
275-20-024
PX01-10
1
10
40
ME42109
275-20-037
PX10-20
10
20
20
ME42108
275-20-038
PX05-20
5
20
20
275-20-040
-
PX01-20
1
20
20
275-20-062
-
PX05-30
5
30
20
800-633-3080 / www.mcpur.com / Mar Cor Purification
Note:
Filters are sold and shipped in CASE quantities.
Additional lengths and micron ratings are available upon request.
Filter housings vary in length requirements, especially in the
smaller filters. Be sure to check housings requirements before
selecting a filter.
Large Diameter Filters (for Big Blue
®
Housings)
F I LT ER S & MEMBRA NES
A q u atre x ™ - LD F ilters
Features/Benefits
•Exceptional dirt holding capacity, less change-out frequency.
•Unequaled life compared to equivalent rated standard filters.
•Ideally suitedfor Plymouth Products Big Blue® and Keystone’s Blue Giant™ housings.
•Constructed of pure polypropylene to meet NSF standard 58.
•Temperature to 150°F.
•Meets the requirements of the FDA Title 21 of the CFR 174.5 and 177.1520.
•Wide chemical compatibility.
AQ U AT R E X - L D F I LT E R S
PART
NUMBER
REFERENCE
NUMBER
MODEL
NUMBER
PRODUCT
DESCRIPTION
LENGTH
(INCHES)
MICRON
RATING
275-10-810
1233955
275-10-812
1233956
275-10-814
1233957
275-10-816
1233958
275-10-811
275-10-813
275-10-815
275-10-817
LD01-10
LD01-20
LD05-10
LD05-20
LD10-10
LD10-20
LD20-10
LD20-20
Filter, Large Diameter
Filter, Large Diameter
Filter, Large Diameter
Filter, Large Diameter
Filter, Large Diameter
Filter, Large Diameter
Filter, Large Diameter
Filter, Large Diameter
10
20
10
20
10
20
10
20
1
1
5
5
10
10
20
20
Wp - S eries
Characteristics
• Offer a wide chemical resistancy
spectrum.
• Compatible with most acids,
corrosive fluids, and gases.
• Provides high efficiency rating
and high dirt-loading capacity.
Specifications
Temperature Range
40° to 165°F (4.4° to 74°C)
Construction
Fibrous Polypropylene media
Polypropylene Core
Suggested Maximum Flow Rate
WP1BB97P - 15 GPM (57 LPM) 4 PSI Drop
WP5BB97P - 20 GPM (76 LPM) 3 PSI Drop
WP10BB97P - 20 GPM (76 LPM) 1 PSI Drop
WP1BB20P - 30 GPM (114 LPM) 6 PSI Drop
WP5BB20P - 40 GPM (151 LPM) 6 PSI Drop
WP25BB20P - 40 GPM (151 LPM) 5 PSI Drop
WARNING: WP series are for drinking water applications. Do not use where the water is microbiologically unsafe or
with water of unknown quality without adequate disinfection before or after the unit.
W P - S E R I E S ST R I N GW O U N D P O LY P R O P Y L E N E F I LT E R S
PART
NUMBER
REFERENCE
NUMBER
MODEL
NUMBER
PRODUCT
DESCRIPTION
LENGTH
(INCHES)
MICRON
RATING
277-10-002
277-10-003
277-10-004
277-10-005
ME42007
ME42008
277-10-008
277-10-006
277-10-007
-
WP1BB97P
WP5BB97P
WP10BB97P
WP25BB97P
WP1BB20P
WP5BB20P
WP25BB20P
Wound Polypropylene, Filter
Wound Polypropylene, Filter
Wound Polypropylene, Filter
Wound Polypropylene, Filter
Wound Polypropylene, Filter
Wound Polypropylene, Filter
Wound Polypropylene, Filter
10
10
10
10
20
20
20
1
5
10
25
1
5
25
WP5BB97P
Filter Cartridges (For Hurricane
®
Housings)
H U R R I C A NE ® C A RT RI DG E S
Standard pleated polyester filter elements
Cartridges rated for temperature to 140°F (60°C). (Results may vary based on flow and other factors)
H U R R I C A N E R E P L AC E M E N T C A R T R I D G E F I LT E R S
PART NUMBER
MODEL NUMBER
LENGTH (INCHES)
MICRON RATING
3024431
277-15-201
277-15-205
277-15-501
277-15-505
HC-40-0.35
HC-40-1
HC-40-5
HC-90-1
HC-90-5
9/5/2008
9/5/2008
9/5/2008
19-1/2
19-1/2
0.35
1
5
1
5
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
13
Filter Cartridges (for Big Blue® Housings)
S 1 - S eries
F I LTE R S & M E M B R ANE S
Large Diameter Pleated Sediment Cartridges
Characteristics
•Designed for general purpose water filtration.
•Economical, yet highly effective at reducing sediment particles down to 20 micron.
•External sheath provides extra support to
protect against system pulsating.
•End caps are fused to prevent bypass and
forming a gasket sealing area.
Specifications
Temperature Range
40° to 145°F (4.4° to 63°C)
Maximum Flow Rate
S1-20BB - 25 GPM (95 LPM)
Construction
Resin Impregnated Cellulose Media
Vinyl Plastisol End Caps
Polypropylene Core
Polypropylene Outer Sheath
W P - S E R I E S ST R I N GW O U N D P O LY P R O P Y L E N E F I LT E R S
S1-20BB
PART
NUMBER
PRODUCT
DESCRIPTION
LENGTH
(INCHES)
MICRON
RATING
CASE
QTY.
277-11-006
S1-20BB Pleated Cellulose-Polyester
20
20
6
E CP - S eries
Large Diameter Pleated Cellulose Polyester Cartridges
Characteristics
•Excellent for all water related processes.
•Wet Strength means better reliability
throughout the life of the cartridge.
•End caps are fused via polypropylene
hot melt seam sealing.
•Higher Delta-P can be maintained without particle unloading.
Specifications
Temperature Range
40° to 125°F (4.4° to 52°C)
Construction
Resin Impregnated Cellulose/Polyester
Media
Vinyl Plastisol End Caps
Polypropylene Core
W P - S E R I E S ST R I N GW O U N D P O LY P R O P Y L E N E F I LT E R S
CP5-BB
PART
NUMBER
PRODUCT
DESCRIPTION
LENGTH
(INCHES)
MICRON
RATING
CASE
QTY.
277-11-002
277-11-007
ECP5-BB Pleated Cellulose-Polyester
ECP5-20BB Pleated Cellulose-Polyester
10
20
5
5
8
6
PP - S eries
Large Diameter Polypropylene Pleated Cartridges
Characteristics
•Unitized end and gasket eliminates fluid
bypass.
•Designed for medium fine residential, commercial, and industrial applications.
•Can be used in most acids, alkalies, plating
solutions, and saline solutions.
•High porosity of the media allows for high
flow rates, high dirt holding capacity, and
low pressure drops.
•Sixteen square feet of filtration media has
been pleated for the BB version.
Specifications
Temperature Range
40° to 145°F (4.4° to 63°C)
Maximum Flow Rate
PP30-BB - 25 GPM (95 LPM)
Construction
Non-woven Polypropylene Media
Vinyl Plastisol End Caps
Polypropylene Core
W P - S E R I E S ST R I N GW O U N D P O LY P R O P Y L E N E F I LT E R S
PP30-BB
PART
NUMBER
PRODUCT
DESCRIPTION
LENGTH
(INCHES)
MICRON
RATING
CASE
QTY.
277-11-005
PP30-BB Pleated Polypropylene
10
30
8
WARNING: S1, CP and PP series are for drinking water applications. Do not use where the water is
microbiologically unsafe or with water of unknown quality without adequate disinfection before or after the unit.
14
800-633-3080 / www.mcpur.com / Mar Cor Purification
PTG-520 Carbon Filtration System
®
p t g - 5 2 0 Carb on bl ock system & filter
®
F I LTE R S & M E M B R ANE S
Compact Carbon Filtration System for Portable RO Systems
Dialysis providers have long appealed to water system suppliers to develop a carbon
filtration alternative that will ensure chlorine and chloramines are fully and reliably
removed prior to the RO system in a configuration that is effective and convenient.
The compact PTG-520 Carbon Filtration System is a new option that is now available to owners of portable RO systems. The PTG-520 system is lighter, has a lower
profile and is cost effective. The PTG-520 carbon block filter has been tested to
meet specific regulations pertaining to the use of carbon as detailed in ANSI/AMMI/
ISO 23500, specifically Annex F & G. The Carbon Filtration System is a design that
includes 2 carbon block filters in series and is engineered and manufactured to be
clean by design.
Features
•Ease of Use - 85% lighter design results in less strenuous cart movement*
•Compact Design - Low profile Carbon Filtration System increases cart stability
•Retrofitable - Carbon Filtration System may be retrofitted on your existing M1 or
M2 cart or docking station along with 700 series and F-801 machines.
•Cost Effective Performance - Change out schedule should result in less costly
operation and eliminate need for onsite service
•Reliability - Chlorine & Chloramine removal guidelines allow for flexible replacement options without compromising performance
•Cleaner – Regular change out results in less potential bacteria buildup in the carbon filter
* when compared with (2) 0.85 cu. ft. carbon tanks.
ptg - 5 2 0 C arbon filtration system
PART
NUMBER
PRODUCT
DESCRIPTION
LENGTH
(INCHES)
MICRON
RATING
CASE
QTY
3027145
PTG-520 Cartridge
5 ½” x 20 ¾”
1.0
1
285-85-003
BUNA-N O-Ring, Housing
N/A
N/A
N/A
3027335
Carbon Filter Kit *
N/A
N/A
N/A
* This kit is intended for use with existing M1 or M2 cart or docking station and includes 2 housings, 2 carbon
cartridges, support bracket, 2 pressure gauges, 2 sample valves, and interconnecting piping.
Need Portable RO Equipment?
See pages 120-132.
Need Portable RO Cart?
See pages 133.
Mar Cor P uri f i cati on / www.mcpur.com /
800-633-3080
15
Carbon Filters
F I LT ER S & MEMBRA NES
G AC - S eries
Granular Activated Carbon Cartridges
Features
•GAC cartridges are designed for effective reduction of
unwanted tastes and odors such as chlorine.
•Engineered to allow water to enter one end and pass
through the entire bed of carbon before exiting through
the other end.
•An internal expansion pad is added to minimize channeling or bypass.
•A nominal 20 micron post filter is incorporated to
reduce carbon fines and other suspended particles.
Specifications
Construction
Granular Activated Carbon
Polystyrene End Caps
Polystyrene Outer Casing
Spun Polypropylene Post Filter
Polyester Expansion Pad
Gaskets - Buna-N (Top), Santaprene (Bottom)
Temperature
40° to 125°F (4.4° to 52°C)
G A C - S eries C arbon F ilters
PART
NUMBER
ME41502
Reference ModelProduct
NumberNumberDescription
Length
MicronCase
(inches) RatingQty.
278-10-002
GAC-10 Granular Activated Carbon
9-3/4
20
12
278-10-003
-
GAC-20 Granular Activated Carbon
20
20
6
278-10-004
-GAC10-BB Granular Activated Carbon
10
20
8
278-10-005
- GAC20-BB Granular Activated Carbon
20
20
6
GAC-10
Capsule Filter
S u p o r L if E T M
Specifications
PALL
Materials of Construction
Membrane - Serial layers of Supor hydrophilic
polyethersulfone membrane
Pore Size - 0.2 µm.
Structural Components - Polypropylene
Sealing Technology - Thermal Bonding
Maximum Differential Pressure
60 psid (4.1 bar) at 25°C
Sterilization/Sanitization Methods
Autoclave: four, 3-minute cycles at 121°C
Hot Water: 88°C at 5 psid (0.3 bar)
Chemical: Peracetic acid, chlorinated alkaline
products, bleach, SO2
Typical Liquid Flow Rate
1 cp
Half Size
0.6 lpm/psid (0.9 lpm/0.1 bar)
Maximum Operating Temperature
60°C at 30 psid (2.1 bar).
Maximum Momentary Pressure
120 psig (8.3 bar) at ambient temperature.
P A L L C apsule F ilter
PartProduct
NumberDescription
280-05-126
16
Supor Capsule Filter, GP
Micron
Rating
Length
(inches)
InletOutletVent
0.2
800-633-3080 / www.mcpur.com / Mar Cor Purification
5.3
1/4” MNPT
1/4 - 1/2” stepped hose barb
yes
Meissner Capsule Filters
®
Meissner STyLUX®disposable capsule filters are absolute-rated, polyethersulfone membrane
filters designed to provide greater bacteria and particle removal at high flow rates and
extremely low pressure drops. STyLUX® capsules contain an asymmetric polyethersulfone
membrane which offers the greatest assurance of filtration performance, stability and
service life for controlling contaminants in demanding environments. The highly porous
polyethersulfone membrane is permanently hydrophilic, has exceptional flow rates, and
provides excellent compatibility and extremely low extractables in a wide range of fluids and
applications.
Features
F I LT ER S & MEMBRA NES
c a p s u le filters
• Permanently hydrophilic membrane
• Absolute ratings from 0.1 to 0.2 µm
• Extremely high flow rates at low pressure drops
• Ultraclean - no additives, surfactants, or post treatments
• High thermal and hydrolytic stability
• Wide chemical compatibility through pH range 1-14
• Highly passive to protein adsorption; low binding
• Reliable integrity under severe process conditions
• Fully integrity testable in water
• Cleanroom manufactured
• 100% integrity tested during manufacture
Specifications
Filter Media: Polyethersulfone (PES) Membrane
Absolute Filtration Ratings: 0.1, 0.2 µm
Bacterial Retention: ASTM F838-05 Challenge
0.1 µm, 0.2 µm > 107 cfu/cm² Brevundimonas diminuta, which
meets the FDA definition of a sterilizing grade filter.
Integrity Testing:
Minimum Bubble Point, Water
0.1 µm 80 psi (5,5 bar)
0.2 µm 44 psi (3,0 bar)
Sterilization: Available presterilized (gamma)
M E I S S N E R ST Y L U X C A P U S L E F I LT E R S
PART
NUMBER
MODEL
NUMBER
PRODUCT
DESCRIPTION
SURFACE
AREA
MICRON
RATING
INLET/
OUTLET
3028166
3028167
3028168
3028169
CSSM0.1-422
CSSM0.2-422
CFSM0.1-41B2
CFSM0.2-41B2
Polyethersulfone Caspule Filter, 0.1 micron
Polyethersulfone Caspule Filter, 0.2 micron
Polyethersulfone Caspule Filter, 0.1 micron
Polyethersulfone Caspule Filter, 0.2 micron
1 ft² ( 0.09 m²)
1 ft² ( 0.09 m²)
0.5 ft² ( 0.05 m²)
0.5 ft² ( 0.05 m²)
0.1
0.2
0.1
0.2
1/4” MNPT x 1/4” hose barb
1/4” MNPT x 1/4” hose barb
1/4” MNPT x 1/4” hose barb
1/4” MNPT x 1/4” hose barb
Mar Cor P uri f i cati on / www.mcpur.com /
800-633-3080
17
Posiclear ™ Endotoxin Control Capsule Filters
F I LTE R S & M E M B R ANE S
c a p s u le filters
Bacteria & Endotoxin Control
For Portable Reverse Osmosis Systems
& Dialysis AAMI Water Points of Use.
Control of bacteria and endotoxin contamination in a hemodialysis
water system is a critical parameter. Selection of a final filter requires
demonstrated endotoxin removal and economical performance. The
Posiclear filter is FDA 510(k) cleared and uniquely designed for use on
portable and central water treatment applications.
The Posiclear filter is manufactured with a positively charged pleated
Nylon 6.6 filter membrane and removes bacteria and endotoxin from
the liquid by size exclusion and adsorption mechanisms. To help keep
the water system clean, the filter is compatible with hot water (90°C)
and peracetic acid disinfection procedures.
Features and Benefits
Absolute Bacterial Retention
Reliable 0.2 μm validated performance. Meets FDA definition of 0.2
μm sterilizing grade filter.
P o si c lear Ca p s u le F ilter S p e c ifi c ati o ns
3027589
PART NUMBER
Enhanced Removal of Negatively Charged Contaminants
Posiclear is manufactured with a positively charged Nylon 6.6 filter
membrane. This feature provides enhanced retention of negatively charged
contaminants including bacteria, endotoxins, viruses and nucleic acids.
CAPSULE
Regulatory Compliance & Quality Assurances
Posiclear endotoxin filters are 100% integrity tested during manufacture to
eliminate possible defects.
MEMBRANE
Capsule w/ 2 air bleed connectors
0.2 μm
FILTER RATING
2
MAXIMUM FLOW RATE (GPM)
MATERIALS OF CONSTRUCTION
Charge-modified Nylon 6.6
Polyester
MEMBRANE SUPPORT LAYER
PLEAT SUPPORT/DRAIN LAYERS
Robust Membrane Construction
Pleated membrane design ensures consistent
performance to specifications.
Polypropylene
CORE, CAGE, AND END CAPS
Sanitary triclamp
CONNECTIONS
Silicon O-Ring
O-RINGS
Performance Engineered Capsule Design
Polypropylene structural components (end caps, adaptors, inner core and
outer cage) are used in the fabrication of Posiclear filter capsules assuring
exceptional thermal, mechanical stability and optimal service life.
Polypropylene
CAPSULE DIMENSIONS
High Capsule Flow Rates
High pleated surface area offers a high flow rate
(up to 2 gpm / capsule).
LENGTH (L)
5 ” (12.7 cm)
DIAMETER
4 “ (10.16 cm)
3.6ft2 (1.097 m2)
FILTRATION SURFACE AREA
OPERATING PARAMETERS
219°F (104°C)
MAX. TEMP
75 PSI (5.2 kg/cm2)
MAX. PRESSURE
P o si c lear Ca p s u le F ilter C o nnne c ti o n C o nfi g u rati o ns
*Capsule not included in kit
*Capsule not included in kit
3027590
1.5” TC x 3/8” Mono Barb Kit*
(For Millenium RO System)
*Capsule not included in kit
3027591
1.5” TC x 3/8” & 1/4” Colder Connector Kit*
(For WRO 300 H, WRO 300,
& Millenium RO Systems)
* Kit includes 2 Triclamps, 2 Adaptors, 2 O-Rings, 1 Bracket, and 1 Adhesive Pad (not shown), Capsule Sold Seperately.
18
800-633-3080 / www.mcpur.com / Mar Cor Purification
3027772
1.5” TC x 1/4” Mono Barb Kit*
(For WRO 300 & WRO 300 H RO Systems)
FiberFlo Pleated Cartridge Filters
®
F I LTE R S & M E M B R ANE S
PO LY P ROP Y LE NE
The FiberFlo Polypropylene depth cartridge filters offer increased
dirt holding capacity, long service life, stratified pore structure,
homogenous high purity media, and are manufactured using rigorous
quality standards. The polypropylene pleated filter is suitable for
general water filtration, chemical filtration, and Reverse Osmosis (RO)
and Deionization (DI) feedwater filtration.
Features
•H
igh surface area.
omogeneous high purity media. Fibers free of residual extrusion
•H
oils, surfactants, antistatic agents and resin binders.
•S
tratified pore structure allows separation of solids along a size
gradient.
•R
igorous quality standards for polypropylene selected.
Benefits
Specifications
Filter Media: Pleated Polypropylene Depth Media
Membrane Support, Core Tube, Sleeve, End Caps: Polypropylene
O-Ring: Silicone
O-Ring Color: Red
Max. Differential Pressure at 68°F (20°C): 50 PSIG
Operating Temperature: Maximum 175°F (75°C)
Max. Recommended Flow Rate: 5 GPM per 10” Section
Cartridge Dimensions
Nominal Length* Filtration Area
10 inch
5 ft2 / 0.5 m2
20 inch
11 ft2 / 1.0 m2
30 inch
16 ft2 / 1.5 m2
40 inch
22 ft2 / 2.0 m2
3
DIFFERENTIAL PRESSURE (psid)
• Increased dirt holding capacity. Longer service life.
eets FDA requirements for food contact.
•M
•R
esults in particle entrapment throughout depth of media reducing
surface blinding and increasing dirt holding capacity.
xhibits very low protein binding characteristics. Meets USP Class
•E
VI Plastics Tests as well as tests for cytoxicity, hemolysis and
pyrogenicity.
0.2 µm
2
0.4 µm
1 µm
1
3 µm, 5 µm
10 µm, 30 µm, 60 µm
0
0
1
2
3
4
5
6
7
8
WATER FLOW RATE (gpm)
Typical Water Flow Rate
per 10-inch (25 cm) FiberFlo pleated cartridge
*Actual overall length of cartridge will vary depending on
configuration. Cartridge performance is as specified regardless of
configuration.
Outside Diameter
2.75 in / 7 cm
Micron Ratings
0.2, 0.4, 1.0, 3.0, 5.0, 10, 30, 60
E nd - F itting / sealing O ptions
Codes
A
B
C
D
E
Description
SOE-222 O-ring/Flat Bottom
SOE-222 O-ring/Fin
SOE-226 O-ring/Fin
DOE-Flat Gasket / Flat Gasket
SOE - 213 O-ring Internal / Flat End
Std Reference
Code 3
Code 4
Code 5
Code DOE
Ametek
Mar Cor P uri f i cati on / www.mcpur.com /
800-633-3080
19
FiberFlo Pleated Cartridge Filters
®
F I LT ER S & MEMBRA NES
PO LY P ROP Y LE NE
FIBERFLO POLYPROPYLENE
PLEATED FILTERS
PART
NUMBER
MODEL
NUMBER
FIBERFLO POLYPROPYLENE
PLEATED FILTERS continued
MICRON LENGTHQUANTITY
RATING
(IN.)
PER CASE
PART
NUMBER
MODEL
NUMBER
MICRON LENGTHQUANTITY
RATING
(IN.)
PER CASE
0.2 Micron Polypropylene Pleated Filter
276-13-501
FP-02-10-A
0.2
276-13-502
FP-02-20-A
0.2
276-13-503
FP-02-30-A
0.2
FP-02-40-A
0.2
276-13-504
10
20
30
40
12
12
12
12
1.0 Micron Polypropylene Pleated Filter
276-13-601
FP-1-10-A
1.0
276-13-602
FP-1-20-A
1.0
276-13-603
FP-1-30-A
1.0
FP-1-40-A
1.0
276-13-604
10
20
30
40
12
12
12
12
276-13-511
276-13-512
276-13-513
276-13-514
FP-02-10-B
FP-02-20-B
FP-02-30-B
FP-02-40-B
0.2
0.2
0.2
0.2
10
20
30
40
12
12
12
12
276-13-611
276-13-612
276-13-613
276-13-614
FP-1-10-B
FP-1-20-B
FP-1-30-B
FP-1-40-B
1.0
1.0
1.0
1.0
10
20
30
40
12
12
12
12
276-13-521
276-13-522
276-13-523
276-13-524
FP-02-10-C
FP-02-20-C
FP-02-30-C
FP-02-40-C
0.2
0.2
0.2
0.2
10
20
30
40
12
12
12
12
276-13-621
276-13-622
276-13-623
276-13-624
FP-1-10-C
FP-1-20-C
FP-1-30-C
FP-1-40-C
1.0
1.0
1.0
1.0
10
20
30
40
12
12
12
12
276-13-531
276-13-532
276-13-533
276-13-534
FP-02-10-D
FP-02-20-D
FP-02-30-D
FP-02-40-D
0.2
0.2
0.2
0.2
10
20
30
40
12
12
12
12
276-13-631
276-13-632
276-13-633
276-13-634
FP-1-10-D
FP-1-20-D
FP-1-30-D
FP-1-40-D
1.0
1.0
1.0
1.0
10
20
30
40
12
12
12
12
FP-02-10-E
0.2
276-13-541
276-13-542
FP-02-20-E
0.2
0.4 Micron Polypropylene Pleated Filter
276-13-551
FP-04-10-A
0.4
276-13-552
FP-04-20-A
0.4
276-13-553
FP-04-30-A
0.4
276-13-554
FP-04-40-A
0.4
10
20
12
12
10
20
30
40
12
12
12
12
10
20
30
40
12
12
12
12
276-13-561
276-13-562
276-13-563
276-13-564
FP-04-10-B
FP-04-20-B
FP-04-30-B
FP-04-40-B
0.4
0.4
0.4
0.4
10
20
30
40
12
12
12
12
FP-1-10-E
1.0
276-13-641
276-13-642
FP-1-20-E
1.0
276-13-643
FP-1-30-E
1.0
276-13-644
FP-1-40-E
1.0
3.0 Micron Polypropylene Pleated Filter
276-13-651
FP-3-10-A
3.0
276-13-652
FP-3-20-A
3.0
276-13-653
FP-3-30-A
3.0
FP-3-40-A
3.0
276-13-654
10
20
30
40
12
12
12
12
276-13-571
276-13-572
276-13-573
276-13-574
FP-04-10-C
FP-04-20-C
FP-04-30-C
FP-04-40-C
0.4
0.4
0.4
0.4
10
20
30
40
12
12
12
12
276-13-661
276-13-662
276-13-663
276-13-664
FP-3-10-B
FP-3-20-B
FP-3-30-B
FP-3-40-B
3.0
3.0
3.0
3.0
10
20
30
40
12
12
12
12
276-13-581
276-13-582
276-13-583
276-13-584
FP-04-10-D
FP-04-20-D
FP-04-30-D
FP-04-40-D
0.4
0.4
0.4
0.4
10
20
30
40
12
12
12
12
276-13-671
276-13-672
276-13-673
276-13-674
FP-3-10-C
FP-3-20-C
FP-3-30-C
FP-3-40-C
3.0
3.0
3.0
3.0
10
20
30
40
12
12
12
12
276-13-591
276-13-592
FP-04-10-E
FP-04-20-E
0.4
0.4
10
20
12
12
276-13-681
276-13-682
276-13-683
276-13-684
FP-3-10-D
FP-3-20-D
FP-3-30-D
FP-3-40-D
3.0
3.0
3.0
3.0
10
20
30
40
12
12
12
12
276-13-691
FP-3-10-E
3.0
276-13-692
FP-3-20-E
3.0
276-13-693
FP-3-30-E
3.0
276-13-694
FP-3-40-E
3.0
FILTERS ARE SOLD AND SHIPPED IN CASE QUANTITIES, unless informed otherwise.
20
800-633-3080 / www.mcpur.com / Mar Cor Purification
10
12
20
12
30
12
40
12
continued on next page
FiberFlo Pleated Cartridge Filters
®
FIBERFLO POLYPROPYLENE
PLEATED FILTERS continued
PART
NUMBER
MODEL
NUMBER
MICRON LENGTHQUANTITY
RATING
(IN.)
PER CASE
FIBERFLO POLYPROPYLENE
PLEATED FILTERS continued
PART
NUMBER
MODEL
NUMBER
MICRON LENGTHQUANTITY
RATING
(IN.)
PER CASE
5.0 Micron Polypropylene Pleated Filter
276-13-701
FP-5-10-A
5.0
276-13-702
FP-5-20-A
5.0
276-13-703
FP-5-30-A
5.0
FP-5-40-A
5.0
276-13-704
10
20
30
40
12
12
12
12
30.0 Micron Polypropylene Pleated Filter
276-13-801
FP-30-10-A
30.0
276-13-802
FP-30-20-A
30.0
276-13-803
FP-30-30-A
30.0
FP-30-40-A
30.0
276-13-804
10
20
30
40
12
12
12
12
276-13-711
276-13-712
276-13-713
276-13-714
FP-5-10-B
FP-5-20-B
FP-5-30-B
FP-5-40-B
5.0
5.0
5.0
5.0
10
20
30
40
12
12
12
12
276-13-811
276-13-812
276-13-813
276-13-814
FP-30-10-B
FP-30-20-B
FP-30-30-B
FP-30-40-B
30.0
30.0
30.0
30.0
10
20
30
40
12
12
12
12
276-13-721
276-13-722
276-13-723
276-13-724
FP-5-10-C
FP-5-20-C
FP-5-30-C
FP-5-40-C
5.0
5.0
5.0
5.0
10
20
30
40
12
12
12
12
276-13-821
276-13-822
276-13-823
276-13-824
FP-30-10-C
FP-30-20-C
FP-30-30-C
FP-30-40-C
30.0
30.0
30.0
30.0
10
20
30
40
12
12
12
12
276-13-731
276-13-732
276-13-733
276-13-734
FP-5-10-D
FP-5-20-D
FP-5-30-D
FP-5-40-D
5.0
5.0
5.0
5.0
10
20
30
40
12
12
12
12
276-13-831
276-13-832
276-13-833
276-13-834
FP-30-10-D
FP-30-20-D
FP-30-30-D
FP-30-40-D
30.0
30.0
30.0
30.0
10
20
30
40
12
12
12
12
FP-5-10-E
5.0
276-13-741
276-13-742
FP-5-20-E
5.0
276-13-743
FP-5-30-E
5.0
276-13-744
FP-5-40-E
5.0
10.0 Micron Polypropylene Pleated Filter
276-13-751
FP-10-10-A
10.0
276-13-752
FP-10-20-A
10.0
276-13-753
FP-10-30-A
10.0
FP-10-40-A
10.0
276-13-754
10
20
30
40
12
12
12
12
10
20
30
40
12
12
12
12
10
20
30
40
12
12
12
12
FP-30-10-E
30.0
276-13-841
276-13-842
FP-30-20-E
30.0
276-13-843
FP-30-30-E
30.0
276-13-844
FP-30-40-E
30.0
60.0 Micron Polypropylene Pleated Filter
276-13-851
FP-60-10-A
60.0
276-13-852
FP-60-20-A
60.0
276-13-853
FP-60-30-A
60.0
FP-60-40-A
60.0
276-13-854
10
20
30
40
12
12
12
12
276-13-761
276-13-762
276-13-763
276-13-764
FP-10-10-B
FP-10-20-B
FP-10-30-B
FP-10-40-B
10.0
10.0
10.0
10.0
10
20
30
40
12
12
12
12
276-13-861
276-13-862
276-13-863
276-13-864
FP-60-10-B
FP-60-20-B
FP-60-30-B
FP-60-40-B
60.0
60.0
60.0
60.0
10
20
30
40
12
12
12
12
276-13-771
276-13-772
276-13-773
276-13-774
FP-10-10-C
FP-10-20-C
FP-10-30-C
FP-10-40-C
10.0
10.0
10.0
10.0
10
20
30
40
12
12
12
12
276-13-871
276-13-872
276-13-873
276-13-874
FP-60-10-C
FP-60-20-C
FP-60-30-C
FP-60-40-C
60.0
60.0
60.0
60.0
10
20
30
40
12
12
12
12
276-13-781
276-13-782
276-13-783
276-13-784
FP-10-10-D
FP-10-20-D
FP-10-30-D
FP-10-40-D
10.0
10.0
10.0
10.0
10
20
30
40
12
12
12
12
276-13-881
276-13-882
276-13-883
276-13-884
FP-60-10-D
FP-60-20-D
FP-60-30-D
FP-60-40-D
60.0
60.0
60.0
60.0
10
20
30
40
12
12
12
12
276-13-791
276-13-792
276-13-793
276-13-794
FP-10-10-E
FP-10-20-E
FP-10-30-E
FP-10-40-E
10.0
10.0
10.0
10.0
10
20
30
40
12
12
12
12
276-13-891
276-13-892
276-13-893
276-13-894
FP-60-10-E
FP-60-20-E
FP-60-30-E
FP-60-40-E
60.0
60.0
60.0
60.0
10
20
30
40
12
12
12
12
F I LT ER S & MEMBRA NES
PO LY P ROP Y LE NE
FILTERS ARE SOLD AND SHIPPED IN CASE QUANTITIES, unless informed otherwise.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
21
FiberFlo “A” Pleated Cartridge Filters
®
F I LT ER S & MEMBRA NES
PO LYE T H ERS U LF ONE
The FiberFlo “A” Polyethersulfone cartridges are absolutely rated
cartridge filters. Made of polyethersulfone membrane, the filters
have an increased surface area with excellent flow rates per 10
inch lengths. Their compatibility with a broad range of chemicals
and physiological inertness makes them suitable for the filtration
of sera, diagnostic reagents, biological fluids, acids, bases, water
and solvents.
Dependable Performance
FiberFlo “A” cartridges consist of a polyethersulfone membrane
with thermally bonded polypropylene components to provide a very
durable filter with only two materials of construction.
The unique hydrophilic polyethersulfone membrane contains no
surfactants or surface wetting agents. Manufactured under QSR,
the filters are 100% integrity tested in manufacturing to ensure
consistent and reliable performance.
Absolute ratings for FiberFlo “A” cartridges can be verified in the
field by integrity testing using bubble point or diffusional flow testing.
All FiberFlo “A” cartridges pass USP class VI plastic tests as well as
tests for cytotoxicity, hemolysis and pyrogenicity.
Applications
•F
inal filtration for bacteria removal in reverse osmosis, deionization and other high purity water systems.
•B
everage and wine filtration/clarification
hotographic solutions
•P
•P
lating solutions
agnetic coatings
•M
E nd - F itting / sealing O ptions
Codes
A
B
C
D
E
Description
SOE-222 O-ring/Flat Bottom
SOE-222 O-ring/Fin
SOE-226 O-ring/Fin
DOE-Flat Gasket / Flat Gasket
SOE - 213 O-ring Internal / Flat End
Std Reference
Code 3
Code 4
Code 5
Code DOE
Ametek
DIFFERENTIAL PRESSURE (psid)
Cartridge Dimensions
Nominal Length* Filtration Area
10 inch
6.5 ft2 / 0.5 m2
20 inch
13.0 ft2 / 1.0 m2
30 inch
19.5 ft2 / 1.5 m2
40 inch
26.0 ft2 / 2.0 m2
Outside Diameter
2.77 in / 7 cm
*Actual overall length of cartridge will vary depending on configuration. Cartridge performance is as specified regardless of configuration.
Pore sizes
0.1, 0.2, and 0.45 microns
5
4
Operating Characteristics
3
0.1
2
µm
1
µm
0.2
0.45
µm
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
WATER FLOW RATE (gpm)
Typical Water Flow Rate
per 10-inch (25 cm) FiberFlo “A”cartridge
22
ilter Media: Pleated Polyethersulfone Membrane
F
Membrane Support, Core Tube, Sleeve, End Caps: Polypropylene
Sealing Technology: Thermal Bonding
Endotoxins: Less than 0.5 EU/ml
Biosafety: All components meet or exceed USP Class VI-121° plastic
tests
Oxidizable Substances: Filtrate meets or exceeds USP requirements
for purified water after 1 liter flush
O-Ring: Silicone
O-Ring Color: Red
Max. Differential Pressure at 77°F (25°C): 50 PSIG (4.1 bar)
Max. Operating Pressure at inlet: 120 PSIG (7 bar)
6
0
Specifications
800-633-3080 / www.mcpur.com / Mar Cor Purification
Typical Water Flow Rates
Pore
GPM/PSID/ Size
10 inch length
0.1 µm
2.5
0.2 µm
4.5
0.45 µm 7.0
LPM/0.1 bar/
10 inch length
13.7
24.7
38.4
Recommended Integrity Test
Pore Minimum Water
Size
Bubble Point
0.1 µm
–
> 45 psig (3.1 bar)
0.2 µm
0.45 µm > 24 psig (1.7 bar)
Diffusional Flow cc/min
@ Test Pressure per 10” length
< 15 @ 48 psig (3.3 bar)
< 15 @ 35 psig (2.4 bar)
< 15 @ 20 psig (1.4 bar)
FiberFlo “A” Pleated Cartridge Filters
®
FIBERFLO “A” POLYETHERSULFONE
PLEATED FILTERS
PART
NUMBER
MODEL
NUMBER
MICRON LENGTHQUANTITY
RATING
(IN.)
PER CASE
FIBERFLO “A” POLYETHERSULFONE
PLEATED FILTERS continued
PART
NUMBER
MODEL
NUMBER
MICRON LENGTHQUANTITY
RATING
(IN.)
PER CASE
0.03 Micron Polyethersulfone Pleated Filter
276-22-501
FPA-003-10-A
0.03
276-22-511
FPA-003-20-A
0.03
276-22-521
FPA-003-30-A
0.03
FPA-003-40-A
0.03
276-22-531
10
20
30
40
12
12
12
12
0.2 Micron Polyethersulfone Pleated Filter
276-22-601
FPA-02-10-A
0.2
276-22-611
FPA-02-20-A
0.2
276-22-621
FPA-02-30-A
0.2
FPA-02-40-A
0.2
276-22-631
10
20
30
40
12
12
12
12
276-22-502
276-22-512
276-22-522
276-22-532
FPA-003-10-B
FPA-003-20-B
FPA-003-30-B
FPA-003-40-B
0.03
0.03
0.03
0.03
10
20
30
40
12
12
12
12
276-22-602
276-22-612
276-22-622
276-22-632
FPA-02-10-B
FPA-02-20-B
FPA-02-30-B
FPA-02-40-B
0.2
0.2
0.2
0.2
10
20
30
40
12
12
12
12
276-22-503
276-22-513
276-22-523
276-22-533
FPA-003-10-C
FPA-003-20-C
FPA-003-30-C
FPA-003-40-C
0.03
0.03
0.03
0.03
10
20
30
40
12
12
12
12
276-22-603
276-22-613
276-22-623
276-22-633
FPA-02-10-C
FPA-02-20-C
FPA-02-30-C
FPA-02-40-C
0.2
0.2
0.2
0.2
10
20
30
40
12
12
12
12
FPA-003-10-E
0.03
276-22-505
276-22-515
FPA-003-20-E
0.03
0.1 Micron Polyethersulfone Pleated Filter
276-22-551
FPA-01-10-A
0.1
276-22-561
FPA-01-20-A
0.1
276-22-571
FPA-01-30-A
0.1
276-22-581
FPA-01-40-A
0.1
10
20
12
12
10
20
30
40
12
12
12
12
276-22-604
276-22-614
276-22-624
276-22-634
FPA-02-10-D
FPA-02-20-D
FPA-02-30-D
FPA-02-40-D
0.2
0.2
0.2
0.2
10
20
30
40
12
12
12
12
276-22-552
276-22-562
276-22-572
276-22-582
FPA-01-10-B
FPA-01-20-B
FPA-01-30-B
FPA-01-40-B
0.1
0.1
0.1
0.1
10
20
30
40
12
12
12
12
10
20
30
40
12
12
12
12
276-22-553
276-22-563
276-22-573
276-22-583
FPA-01-10-C
FPA-01-20-C
FPA-01-30-C
FPA-01-40-C
0.1
0.1
0.1
0.1
10
20
30
40
12
12
12
12
FPA-02-10-E
0.2
276-22-605
276-22-615
FPA-02-20-E
0.2
276-22-625
FPA-02-30-E
0.2
276-22-635
FPA-02-40-E
0.2
0.45 Micron Polyethersulfone Pleated Filter
276-22-651
FPA-045-10-A
0.45
276-22-661
FPA-045-20-A
0.45
276-22-671
FPA-045-30-A
0.45
FPA-045-40-A
0.45
276-22-681
10
20
30
40
12
12
12
12
276-22-555
276-22-565
FPA-01-10-E
FPA-01-20-E
0.1
0.1
10
20
12
12
276-22-652
276-22-662
276-22-672
276-22-682
FPA-045-10-B
FPA-045-20-B
FPA-045-30-B
FPA-045-40-B
0.45
0.45
0.45
0.45
10
20
30
40
12
12
12
12
276-22-653
276-22-663
276-22-673
276-22-683
FPA-045-10-C
FPA-045-20-C
FPA-045-30-C
FPA-045-40-C
0.45
0.45
0.45
0.45
10
20
30
40
12
12
12
12
276-22-654
276-22-664
276-22-674
276-22-684
FPA-045-10-D
FPA-045-20-D
FPA-045-30-D
FPA-045-40-D
0.45
0.45
0.45
0.45
10
20
30
40
12
12
12
12
276-22-655
276-22-665
276-22-675
276-22-685
FPA-045-10-E
FPA-045-20-E
FPA-045-30-E
FPA-045-40-E
0.45
0.45
0.45
0.45
10
20
30
40
12
12
12
12
FILTERS ARE SOLD AND SHIPPED IN CASE QUANTITIES, unless
informed otherwise.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
F I LT ER S & MEMBRA NES
PO LYE TH E RS U LF ONE
23
FiberFlo “NY” Pleated Cartridge Filters
®
F I LT ER S & MEMBRA NES
N YL ON
The FiberFlo “NY” nylon cartridges are absolutely rated cartridge
filters. Made of nylon membrane, the filters have an increased
surface area with excellent flow rates per 10 inch lengths. Nylon is
compatible with a broad range of chemicals. FiberFlo “NY” filters
provide an economical alternative for the filtration of water, acids,
bases, solvents, and other process fluids.
Dependable Performance
FiberFlo “NY” cartridges consist of a nylon membrane with thermally bonded polypropylene components to provide a very durable
filter with only two materials of construction.
The nylon membrane contains no surfactants or surface wetting
agents. Manufactured under QSR, the filters are integrity tested in
manufacturing to ensure consistent and reliable performance, and
flushed with 17+ megohm cm water to remove any manufacturing
debris.
Absolute ratings for FiberFlo “NY” cartridges can be verified in the
field by integrity testing using bubble point or diffusional flow testing. All FiberFlo “NY” cartridges pass USP class VI plastic tests as
well as tests for cytotoxicity, hemolysis and pyrogenicity.
Applications
• Final filtration for bacteria removal in reverse osmosis, deionization and other high purity water systems.
• Particle filtration for ultrapure chemicals
• Photographic solutions
• Plating solutions
• Magnetic coatings
E nd - F itting / sealing O ptions
Codes
A
B
C
D
E
Description
SOE-222 O-ring/Flat Bottom
SOE-222 O-ring/Fin
SOE-226 O-ring/Fin
DOE-Flat Gasket / Flat Gasket
SOE - 213 O-ring Internal / Flat End
Std Reference
Code 3
Code 4
Code 5
Code DOE
Ametek
DIFFERENTIAL PRESSURE (psid)
5
0.1 µm
4
0.2 µm
3
2
0.45 µm
1
0.65 µm
0.5
1
1.5
2
2.5
3
3.5
4
WATER FLOW RATE (gpm)
Typical Water Flow Rate
per 10-inch (25 cm) FiberFlo “NY”cartridge
24
Filter Media: Pleated Nylon Membrane
Membrane Support, Core Tube, Sleeve, End Caps: Polypropylene
Sealing Technology: Thermal Bonding
Endotoxins: Less than 0.5 EU/ml
Biosafety: All components meet or exceed USP Class VI-121° plastic
tests
Oxidizable Substances: Filtrate meets or exceeds USP requirements
for purified water after 1 liter flush
O-Ring: Silicone
O-Ring Color: Red
Cartridge Dimensions
Nominal Length* Filtration Area
10 inch
7.0 ft2 / 0.65 m2
20 inch
14.0 ft2 / 1.3 m2
30 inch
26.0 ft2 / 1.95 m2
40 inch
28.0 ft2 / 2.6 m2
Outside Diameter
2.77 in / 7 cm
*Actual overall length of cartridge will vary depending on configuration. Cartridge performance is as specified regardless of configuration.
6
0
Specifications
800-633-3080 / www.mcpur.com / Mar Cor Purification
Max. Differential Pressure at 77°F (25°C): 50 PSIG (4.1 bar)
Max. Operating Pressure at Inlet: 120 PSIG (7 bar)
Max. Operating Temperature: 176°F (80°C)
Pore sizes
0.1, 0.2, 0.45 and 0.65 microns
Operating Characteristics
Typical Water Flow Rates
Pore
GPM/PSID/ Size
10 inch length
0.1 µm
1.0
0.2 µm
1.25
0.45 µm 3.0
0.65 µm 5.5
LPM/0.1 bar/
10 inch length
3.9
4.7
11.4
20.8
Recommended Integrity Test
Pore Diffusional Flow cc/min
Size
@ Test Pressure per 10” length
< 55 @ 48 psig (3.3 bar)
0.1 µm
< 55 @ 35 psig (2.4 bar)
0.2 µm
0.45 µm < 55 @ 20 psig (1.4 bar)
0.65 µm < 55 @ 15 psig (1.0 bar)
FiberFlo “NY” Pleated Cartridge Filters
®
FIBERFLO “NY”
N ylon P L E A T E D F I L T E R S
PART
NUMBER
Model
NUMBER
MICRON
RATING
FIBERFLO “NY”
N ylon P L E A T E D F I L T E R S c o n t i n u e d
LENGTH
(IN.)
PART
NUMBER
Model
NUMBER
MICRON
RATING
LENGTH
(IN.)
0.1 Micron Nylon Pleated Filter
276-21-301
FPNY-01-10-A
276-21-302
FPNY-01-20-A
276-21-303
FPNY-01-30-A
276-21-304
FPNY-01-40-A
0.1
0.1
0.1
0.1
10
20
30
40
0.45 Micron Nylon Pleated Filter
276-21-309
FPNY-045-10-A
276-21-310
FPNY-045-20-A
276-21-311
FPNY-045-30-A
276-21-312
FPNY-045-40-A
0.45
0.45
0.45
0.45
10
20
30
40
276-21-351
276-21-352
276-21-353
276-21-354
FPNY-01-10-B
FPNY-01-20-B
FPNY-01-30-B
FPNY-01-40-B
0.1
0.1
0.1
0.1
10
20
30
40
276-21-359
276-21-360
276-21-361
276-21-362
FPNY-045-10-B
FPNY-045-20-B
FPNY-045-30-B
FPNY-045-40-B
0.45
0.45
0.45
0.45
10
20
30
40
276-21-401
276-21-402
276-21-403
276-21-404
FPNY-01-10-C
FPNY-01-20-C
FPNY-01-30-C
FPNY-01-40-C
0.1
0.1
0.1
0.1
10
20
30
40
276-21-409
276-21-410
276-21-411
276-21-412
FPNY-045-10-C
FPNY-045-20-C
FPNY-045-30-C
FPNY-045-40-C
0.45
0.45
0.45
0.45
10
20
30
40
276-21-505
FPNY-01-10-E
276-21-506
FPNY-01-20-E
0.2 Micron Nylon Pleated Filter
276-21-305
FPNY-02-10-A
276-21-306
FPNY-02-20-A
276-21-307
FPNY-02-30-A
276-21-308
FPNY-02-40-A
0.1
0.1
10
20
0.45
0.45
10
20
0.2
0.2
0.2
0.2
10
20
30
40
276-21-512
FPNY-045-10-E
276-21-513
FPNY-045-20-E
0.65 Micron Nylon Pleated Filter
276-21-313
FPNY-065-10-A
276-21-314
FPNY-065-20-A
276-21-315
FPNY-065-30-A
276-21-316
FPNY-065-40-A
0.65
0.65
0.65
0.65
10
20
30
40
276-21-355
276-21-356
276-21-357
276-21-358
FPNY-02-10-B
FPNY-02-20-B
FPNY-02-30-B
FPNY-02-40-B
0.2
0.2
0.2
0.2
10
20
30
40
276-21-363
276-21-364
276-21-365
276-21-366
FPNY-065-10-B
FPNY-065-20-B
FPNY-065-30-B
FPNY-065-40-B
0.65
0.65
0.65
0.65
10
20
30
40
276-21-405
276-21-406
276-21-407
276-21-408
FPNY-02-10-C
FPNY-02-20-C
FPNY-02-30-C
FPNY-02-40-C
0.2
0.2
0.2
0.2
10
20
30
40
276-21-413
276-21-414
276-21-415
276-21-416
FPNY-065-10-C
FPNY-065-20-C
FPNY-065-30-C
FPNY-065-40-C
0.65
0.65
0.65
0.65
10
20
30
40
276-21-509
276-21-510
FPNY-02-10-E
FPNY-02-20-E
0.2
0.2
10
20
276-21-515
276-21-516
FPNY-065-10-E
FPNY-065-20-E
0.65
0.65
10
20
F I LT ER S & MEMBRA NES
N YL ON
FILTERS ARE SOLD AND SHIPPED INDIVIDUALLY.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
25
FiberFlo “PM” Pleated Cartridge Filters
®
F I LT ER S & MEMBRA NES
PO LY P ROPY LE NE
The FiberFlo “PM” polypropylene cartridges are absolutely rated
cartridge filters. Made of polypropylene membrane, the filters have
an increased surface area with excellent flow rates per 10 inch
lengths. Their compatibility with a broad range of chemicals and
physiological inertness makes them suitable for the filtration of
acids, bases, water and solvents. The hydrophobic nature of the
membrane makes “PM” filters an economical alternative to PTFE
membrane filters in air, process gas and vent filter applications.
Dependable Performance
FiberFlo “PM” cartridges consist of a polypropylene membrane
with thermally bonded polypropylene components to provide a very
durable filter with a single material of construction.
The unique hydrophilic polypropylene membrane contains no
surfactants or surface wetting agents. Manufactured under QSR,
the filters are 100% integrity tested in manufacturing to ensure
consistent and reliable performance, and rinsed with 17+ megohm
cm water to remove any manufacturing debris.
All FiberFlo “PM” cartridges pass USP class VI plastic tests as well
as tests for cytotoxicity, hemolysis and pyrogenicity.
Applications
• Final filtration for high purity process chemicals.
• Economical air and process gas filtration
• Tank vent filtration
Specifications
Filter Media: Pleated Polypropylene Membrane
Membrane Support, Core Tube, Sleeve, End Caps: Polypropylene
Sealing Technology: Thermal Bonding
Endotoxins: Less than 0.5 EU/ml
Biosafety: All components meet or exceed USP Class VI-121°
plastic tests
Oxidizable Substances: Filtrate meets or exceeds USP requirements for purified water after 1 liter flush
O-Ring: Silicone
O-Ring Color: Red
E nd - F itting / sealing O ptions
Codes
A
B
C
D
E
Description
SOE-222 O-ring/Flat Bottom
SOE-222 O-ring/Fin
SOE-226 O-ring/Fin
DOE-Flat Gasket / Flat Gasket
SOE - 213 O-ring Internal / Flat End
Std Reference
Code 3
Code 4
Code 5
Code DOE
Ametek
Cartridge Dimensions
Nominal Length* Filtration Area
10 inch
7.0 ft2 / 0.65 m2
20 inch
14.0 ft2 / 1.3 m2
30 inch
21.0 ft2 / 1.95 m2
40 inch
28.0 ft2 / 2.6 m2
Outside Diameter: 2.77 in / 7 cm
*Actual overall length of cartridge will vary depending on configuration. Cartridge performance is as specified regardless of configuration.
Max. Differential Pressure at 77°F (25°C): 50 PSIG (4.1 bar)
Max. Operating Pressure at inlet: 120 PSIG (7 bar)
Max. Operating Temperature: 176°F (80°C)
Pore sizes
0.1 and 0.2 microns.
Operating Characteristics
Typical Water Flow Rates
Pore
GPM/PSID/ Size
10 inch length
0.1 µm
0.75
2.75
0.2 µm
LPM/0.1 bar/
10 inch length
2.8
10.4
Typical Air Flow Rate
Pore SCFM/PSID/
Size
10 inch length
0.1 µm
15
0.2 µm
50
m3/psid/hour
10 inch length
25.5
85.0
Recommended Integrity Test
Pore Diffusional Flow cc/min
Size
@ Test Pressure per 10” length**
0.1 µm
< 30 cc/min @ 40 psig (2.76 bar)
< 30 cc/min @ 35 psig (2.41 bar)
0.2 µm
** Using water wet membrane
26
800-633-3080 / www.mcpur.com / Mar Cor Purification
FiberFlo “PM” Pleated Cartridge Filters
®
FIBERFLO “PM”
P olypropylene P L E A T E D F I L T E R S
MICRON LENGTHQUANTITY
RATING
(IN.)
PER CASE
0.1 Micron Absolute Polypropylene Pleated Filter
276-26-471
FPPM-01-10-A
0.1
276-26-472
FPPM-01-20-A
0.1
276-26-473
FPPM-01-30-A
0.1
276-26-474
FPPM-01-40-A
0.1
10
20
30
40
12
12
12
12
276-26-481
276-26-482
276-26-483
276-26-484
FPPM-01-10-B
FPPM-01-20-B
FPPM-01-30-B
FPPM-01-40-B
0.1
0.1
0.1
0.1
10
20
30
40
12
12
12
12
276-26-491
276-26-492
276-26-493
276-26-494
FPPM-01-10-C
FPPM-01-20-C
FPPM-01-30-C
FPPM-01-40-C
0.1
0.1
0.1
0.1
10
20
30
40
12
12
12
12
276-26-511
FPPM-01-10-E
0.1
276-26-512
FPPM-01-20-E
0.1
0.2 Micron Absolute Polypropylene Pleated Filter
276-26-475
FPPM-02-10-A
0.2
276-26-476
FPPM-02-20-A
0.2
276-26-477
FPPM-02-30-A
0.2
276-26-478
FPPM-02-40-A
0.2
10
20
12
12
10
20
30
40
12
12
12
12
276-26-485
276-26-486
276-26-487
276-26-488
FPPM-02-10-B
FPPM-02-20-B
FPPM-02-30-B
FPPM-02-40-B
0.2
0.2
0.2
0.2
10
20
30
40
12
12
12
12
276-26-495
276-26-496
276-26-497
276-26-498
FPPM-02-10-C
FPPM-02-20-C
FPPM-02-30-C
FPPM-02-40-C
0.2
0.2
0.2
0.2
10
20
30
40
12
12
12
12
276-26-499
FPPM-02-10-D
0.2
10
12
276-26-513
276-26-514
FPPM-02-10-E
FPPM-02-20-E
0.2
0.2
10
20
12
12
6
DIFFERENTIAL PRESSURE (psid)
Model
NUMBER
0.1 µm
5
4
3
2
0.2 µm
1
0
0.5
1
1.5
2
2.5
3
3.5
4
WATER FLOW RATE (gpm)
Typical Water Flow Rate
per 10-inch (25 cm) FiberFlo “PM”cartridge
6
DIFFERENTIAL PRESSURE (psid)
PART
NUMBER
F I LT ER S & MEMBRA NES
PO LY P ROPY LE NE
0.1 µm
5
4
3
2
0.2 µm
1
0
10
20
30
40
50
60
70
80
AIR FLOW RATE (gpm)
Typical AIR Flow Rate
per 10-inch (25 cm) FiberFlo “PM”cartridge
FILTERS ARE SOLD AND SHIPPED IN CASE QUANTITIES, unless
informed otherwise.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
27
FiberFlo “T” Pleated Cartridge Filters
®
F I LT ER S & MEMBRA NES
P o lytetrafl u roethylene (PTFE)
The FiberFlo “T” PTFE cartridges provide microfilter users with reliable flow
rates, chemical compatibility, economical filtration, and solvent compatibility. Containing 8.0 square feet of expanded PTFE membrane, FiberFlo
PTFE Filters offer users a highly efficient hydrophobic “barrier” ensuring low moisture content of ultrapure gasses. Additionally, it will ensure
filtration performance in the purification of aggressive liquids and organic
solvents. Each FiberFlo PTFE cartridge filter is manufactured and integrity
tested in a certified Class 10,000 cleanroom to assure consistent performance and quality. All components are thermally bonded to assure integrity
and to reduce extractables.
Applications
• Photoresists
• Compressed Gas
• Electronic Grade Solvents
• Pharmaceutical and intermediate Solvents
• Hot Deionized Water
• Tank Vents
Specifications
E nd - F itting / sealing O ptions
Membrane Material: PTFE
Support Layers : Polypropylene
Cartridge Hardware: Polypropylene
Cartridge Dimensions*
Nominal Length: 10, 20, 30, and 40 inches
Outside Diameter: 2.77 in / 7 cm
*Actual overall length of cartridge will vary depending on configuration.
DIFFERENTIAL PRESSURE (psid)
0.05 µm
4
0.1 µm
3
2
0.2 µm
1
0.45 µm
1.0 µm
0.5
1
1.5
2
2.5
3
3.5
4
Typical Water Flow Rate
per 10-inch (25 cm) FiberFlo “T”cartridge
DIFFERENTIAL PRESSURE (psid)
Description
SOE-222 O-ring/Flat Bottom
SOE-222 O-ring/Fin
SOE-226 O-ring/Fin
DOE-Flat Gasket / Flat Gasket
SOE - 213 O-ring Internal / Flat End
Maximum Operating Pressure Reverse:
50 psid (3.8 bar) @ 75°F (24°C)
Chemical Compatibility
Compatible with most semiconductor grade solvents and
other chemicals.
Pore sizes
0.05, 0.1, 0.2, 0.45, and 1.0 microns.
Integrity Test Values
Micron 100% IPA
Pore Size
Bubble Point
0.05 µm
30 psig (2.1 bar)
0.1 µm
22 psig (1.5 bar)
0.2 µm
15 psig (1.0 bar)
0.45 µm
9 psig (0.6 bar)
1.0 µm
6 psig (0.4 bar)
6
Operating Characteristics
5
Typical Water Flow Rates**
0.05 µm 1.0 gpm/psid (55 lpm/bar)
0.1 µm
1.25 gpm/psid (69 lpm/bar)
2.8 gpm/psid (154 lpm/bar)
0.2 µm
0.45 µm 5.7 gpm/psid (313 lpm/bar)
1.0 µm
9.0 gpm/psid (494 lpm/bar)
4
0.05 µm
3
0.1 µm
2
0.2 µm
0.45 µm
1.0 µm
1
0
Std Reference
Code 3
Code 4
Code 5
Code DOE
Ametek
Maximum Operating Pressure Forward:
80 psid (5.5 bar) @ 75°F (24°C)
5
WATER FLOW RATE (gpm)
10
20
30
40
50
60
70
80
AIR FLOW RATE (scfm)
Typical Air Flow Rate
per 10-inch (25 cm) FiberFlo “T”cartridge
28
Codes
A
B
C
D
E
Cartridge performance is as specified regardless of configuration.
6
0
800-633-3080 / www.mcpur.com / Mar Cor Purification
** For fluids with a viscosity of
1 cp per 10” (25 cm) cartridge equivalent.
Typical Air Flow Rate
0.05 µm 22 scfm/psid (9.0 slpm/mbar)
0.1 µm
29 scfm/psid (11.9 slpm/mbar)
0.2 µm
47 scfm/psid (19.3 slpm/mbar)
0.45 µm 73 scfm/psid (29.9 slpm/mbar)
1.0 µm 94 scfm/psid (38.5 slpm/mbar)
FiberFlo “T” Pleated Cartridge Filters
®
FIBERFLO “T”
PTFE PLEATED FILTERS
PART
NUMBER
Model
NUMBER
MICRON
RATING
FIBERFLO “T”
PTFE PLEATED FILTERS continued
LENGTH
(IN.)
PART
NUMBER
Model
NUMBER
MICRON
RATING
LENGTH
(IN.)
0.1 Micron PTFE Pleated Filter
276-27-551
FPT-01-10-A
276-27-561
FPT-01-20-A
276-27-571
FPT-01-30-A
276-27-581
FPT-01-40-A
0.1
0.1
0.1
0.1
10
20
30
40
0.45 Micron PTFE Pleated Filter
276-27-631
FPT-045-10-A
276-27-641
FPT-045-20-A
276-27-651
FPT-045-30-A
FPT-045-40-A
276-27-661
0.45
0.45
0.45
0.45
10
20
30
40
276-27-552
276-27-562
276-27-572
276-27-582
FPT-01-10-B
FPT-01-20-B
FPT-01-30-B
FPT-01-40-B
0.1
0.1
0.1
0.1
10
20
30
40
276-27-632
276-27-642
276-27-652
276-27-662
FPT-045-10-B
FPT-045-20-B
FPT-045-30-B
FPT-045-40-B
0.45
0.45
0.45
0.45
10
20
30
40
276-27-553
276-27-563
276-27-573
276-27-583
FPT-01-10-C
FPT-01-20-C
FPT-01-30-C
FPT-01-40-C
0.1
0.1
0.1
0.1
10
20
30
40
276-27-633
276-27-643
276-27-653
276-27-663
FPT-045-10-C
FPT-045-20-C
FPT-045-30-C
FPT-045-40-C
0.45
0.45
0.45
0.45
10
20
30
40
276-27-554
276-27-564
276-27-574
276-27-584
FPT-01-10-D
FPT-01-20-D
FPT-01-30-D
FPT-01-40-D
0.1
0.1
0.1
0.1
10
20
30
40
276-27-634
276-27-644
276-27-654
276-27-664
FPT-045-10-D
FPT-045-20-D
FPT-045-30-D
FPT-045-40-D
0.45
0.45
0.45
0.45
10
20
30
40
276-27-555
FPT-01-10-E
276-27-565
FPT-01-20-E
276-27-575
FPT-01-30-E
276-27-585
FPT-01-40-E
0.2 Micron PTFE Pleated Filter
276-27-591
FPT-02-10-A
276-27-601
FPT-02-20-A
276-27-611
FPT-02-30-A
FPT-02-40-A
276-27-621
0.1
0.1
0.1
0.1
10
20
30
40
0.45
0.45
0.45
0.45
10
20
30
40
0.2
0.2
0.2
0.2
10
20
30
40
276-27-635
FPT-045-10-E
276-27-645
FPT-045-20-E
276-27-655
FPT-045-30-E
276-27-665
FPT-045-40-E
1.0 Micron PTFE Pleated Filter
276-27-671
FPT-1-10-A
276-27-681
FPT-1-20-A
276-27-691
FPT-1-30-A
276-27-701
FPT-1-40-A
1.0
1.0
1.0
1.0
10
20
30
40
276-27-592
276-27-602
276-27-612
276-27-622
FPT-02-10-B
FPT-02-20-B
FPT-02-30-B
FPT-02-40-B
0.2
0.2
0.2
0.2
10
20
30
40
276-27-672
276-27-682
276-27-692
276-27-702
FPT-1-10-B
FPT-1-20-B
FPT-1-30-B
FPT-1-40-B
1.0
1.0
1.0
1.0
10
20
30
40
276-27-593
276-27-603
276-27-613
276-27-623
FPT-02-10-C
FPT-02-20-C
FPT-02-30-C
FPT-02-40-C
0.2
0.2
0.2
0.2
10
20
30
40
276-27-673
276-27-683
276-27-693
276-27-703
FPT-1-10-C
FPT-1-20-C
FPT-1-30-C
FPT-1-40-C
1.0
1.0
1.0
1.0
10
20
30
40
276-27-594
276-27-604
276-27-614
276-27-624
FPT-02-10-D
FPT-02-20-D
FPT-02-30-D
FPT-02-40-D
0.2
0.2
0.2
0.2
10
20
30
40
276-27-674
276-27-684
276-27-694
276-27-704
FPT-1-10-D
FPT-1-20-D
FPT-1-30-D
FPT-1-40-D
1.0
1.0
1.0
1.0
10
20
30
40
276-27-595
276-27-605
276-27-615
276-27-625
FPT-02-10-E
FPT-02-20-E
FPT-02-30-E
FPT-02-40-E
0.2
0.2
0.2
0.2
10
20
30
40
276-27-675
276-27-685
276-27-695
276-27-705
FPT-1-10-E
FPT-1-20-E
FPT-1-30-E
FPT-1-40-E
1.0
1.0
1.0
1.0
10
20
30
40
F I LT ER S & MEMBRA NES
P o lytetrafl u ro ethylene ( PTFE)
Filters are sold and shipped individually.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
29
FiberFlo Hollow Fiber Cartridge Filters
®
F I LT ER S & MEMBRA NES
Cartri d g e filterS
Features
•Provides consistent and verifiable pyrogen removal that
surpasses traditional, absolute-rated filters.
•Up to 3X the surface area of comparable pleated cartridge
filters.
•Can be steam sterilized in-line or autoclaved off-line.
•Delivers fine filtration at high flow rates with low pressure
drops.
•Available in 4 sizes, 4 micron ratings and a variety of endcap
styles.
•Filters exceed requirements of USP Class VI Plastics Testing;
meets USP standards for water extractables. Filters are
integrity testable by diffusional methods.
• Fine filtration
• High flow with low pressure drops
• Longer filter life
Suggested Applications
New, high performance FiberFlo® HF Cartridge Filters are
extremely versatile. They can be used in a wide variety of
industries and applications.
Pharmaceutical Manufacturing
USP Purified Water
Ophthamolics
Serum and other Blood Fractions
Buffers
Growth Media
Fermentation Feed Stocks
Medical and Laboratory
Medical Device Rinsing
Hemodialysis Water Systems
Medical Equipment Rinsewater
FiberFlo® Cartridge Membrane Selection
FiberFlo® 50
Offers highest degree of control of particulates and microganisims;
recommended for highest pyrogen removal applications.
Absolute pore removal rating of 0.05 µm. Polyphen® polysulphone
membrane.
Maximum flow rate per 10-inch segment - 2.5 gpm.
Will remove 100 percent of endotoxin when challenged with a feed
concentration of 5.0 EU/ml.
Food and Beverage
Soft Drinks
Mineral and Bottled Waters
Distilled Spirits
Food Products Makeup and Rinse Waters
Seltzer, Vinegar
FiberFlo® 100
Offers best balance of flow, pressure, retentive capacity, pyrogen
removal and cost.
Absolute pore removal rating of 0.1 µm.
Maximum flow rate per 10-inch segment - 3.0 gpm.
Will remove 100 percent of endotoxin when challenged with a feed
concentration of 1.0 EU/ml.
Industrial
Deionized Water
Industrial Process Water
Dilute Inorganic Chemical Solutions
Semiconductor Manufacturing
18
SQUARE FEET
14
12
1.0
10
8
6
0.5
4
SQUARE METERS
1.5
16
2
0
PLEATED-M PLEATED-F PLEATED-G
PLEATED-P
FIBERFLO
Filter Area Comparison
30
800-633-3080 / www.mcpur.com / Mar Cor Purification
FiberFlo® 200
Offers maximum flow rates without loss of bacteria retention.
Absolute removal of Brevundimonas diminuta is a characteristic of this
filter.
Absolute pore removal rating of 0.2 µm.
Maximum flow rate per 10-inch segment - 3.0 gpm.
Will remove 100 percent of endotoxin when challenged with a feed
concentration of 0.5 EU/ml.
FiberFlo® 450
Designed for prefiltration and fluid clarification applications.
Assures maximum protection of downstream sterilizing filters.
Absolute pore removal rating of 0.45 µm.
Maximum flow rate per 10-inch segment - 5.0 gpm.
Provides superior particle control, dirt-holding capacity, and flow rates.
FiberFlo Hollow Fiber Cartridge Filters
®
F I LT ER S & MEMBRA NES
Cartri d g e filterS
F iber F lo C artridge F ilters
Part Number
Model NumberProduct Description
Micron
Rating
Length
(inches)
279-20-001
279-20-002
279-20-003
279-20-004
279-20-005
279-20-006
279-20-007
279-20-008
279-20-009
279-20-010
279-20-011
50-103
50-104
50-105
50-107
50-203
50-204
50-205
50-208
50-303
50-304
50-305
222 O-Ring
222 O-Ring
226 O-Ring
119 O-Ring
222 O-Ring
222 O-Ring
226 O-Ring
119 O-Ring
222 O-Ring
222 O-Ring
226 O-Ring
replaces Pall Code 3, Millipore Code 0
w/fin, replaces Pall Code 8, Millipore Code 5
w/fin, replaces Pall Code 7, Millipore Code 7
Internal O-Ring for Pentek Housing*
replaces Pall Code 3, Millipore Code 0
w/fin, replaces Pall Code 8, Millipore Code 5
w/fin, replaces Pall Code 7, Millipore Code 7
Internal O-Ring for Pentek Housing*
replaces Pall Code 3, Millipore Code 0
w/fin, replaces Pall Code 8, Millipore Code 5
w/fin, replaces Pall Code 7, Millipore Code 7
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
10
10
10
10
20
20
20
20
30
30
30
279-20-015
279-20-016
279-20-017
279-20-018
279-20-019
279-20-020
279-20-021
279-20-022
279-20-023
279-20-024
279-20-025
100-103
100-104
100-105
100-107
100-203
100-204
100-205
100-208
100-303
100-304
100-305
222 O-Ring
222 O-Ring
226 O-Ring
119 O-Ring
222 O-Ring
222 O-Ring
226 O-Ring
119 O-Ring
222 O-Ring
222 O-Ring
226 O-Ring
replaces Pall Code 3, Millipore Code 0
w/fin, replaces Pall Code 8, Millipore Code 5
w/fin, replaces Pall Code 7, Millipore Code 7
Internal O-Ring for Pentek Housing*
replaces Pall Code 3, Millipore Code 0
w/fin, replaces Pall Code 8, Millipore Code 5
w/fin, replaces Pall Code 7, Millipore Code 7
Internal O-Ring for Pentek Housing*
replaces Pall Code 3, Millipore Code 0
w/fin, replaces Pall Code 8, Millipore Code 5
w/fin, replaces Pall Code 7, Millipore Code 7
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
10
10
10
10
20
20
20
20
30
30
30
279-20-029
279-20-030
279-20-031
279-20-032
279-20-033
279-20-034
279-20-035
279-20-036
279-20-037
279-20-038
279-20-039
200-103
200-104
200-105
200-107
200-203
200-204
200-205
200-208
200-303
200-304
200-305
222 O-Ring 222 O-Ring 226 O-Ring 119 O-Ring 222 O-Ring 222 O-Ring 226 O-Ring 119 O-Ring 222 O-Ring 222 O-Ring 226 O-Ring replaces Pall Code 3, Millipore Code 0
w/fin, replaces Pall Code 8, Millipore Code 5
w/fin, replaces Pall Code 7, Millipore Code 7
Internal O-Ring for Pentek Housing*
replaces Pall Code 3, Millipore Code 0
w/fin, replaces Pall Code 8, Millipore Code 5
w/fin, replaces Pall Code 7, Millipore Code 7
Internal O-Ring for Pentek Housing*
replaces Pall Code 3, Millipore Code 0
w/fin, replaces Pall Code 8, Millipore Code 5
w/fin, replaces Pall Code 7, Millipore Code 7
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
10
10
10
10
20
20
20
20
30
30
30
279-20-043
279-20-044
279-20-045
279-20-046
279-20-047
279-20-048
279-20-049
279-20-050
279-20-051
279-20-052
279-20-053
450-103
450-104
450-105
450-107
450-203
450-204
450-205
450-208
450-303
450-304
450-305
222 O-Ring 222 O-Ring 226 O-Ring 119 O-Ring 222 O-Ring 222 O-Ring 226 O-Ring 119 O-Ring 222 O-Ring 222 O-Ring 226 O-Ring replaces Pall Code 3, Millipore Code 0
w/fin, replaces Pall Code 8, Millipore Code 5
w/fin, replaces Pall Code 7, Millipore Code 7
Internal O-Ring for Pentek Housing*
replaces Pall Code 3, Millipore Code 0
w/fin, replaces Pall Code 8, Millipore Code 5
w/fin, replaces Pall Code 7, Millipore Code 7
Internal O-Ring for Pentek Housing*
replaces Pall Code 3, Millipore Code 0
w/fin, replaces Pall Code 8, Millipore Code 5
w/fin, replaces Pall Code 7, Millipore Code 7
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
10
10
10
10
20
20
20
20
30
30
30
*Simple filter bowl modifications are required for this cartridge. Contact us for more information.
FILTERS ARE SOLD AND SHIPPED INDIVIDUALLY.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
31
FiberFlo Hollow Fiber Capsule Filters
®
F I LTE R S & M E M B R ANE S
c a ps u le filters
Features
•Provides consistent and verifiable pyrogen removal that
surpasses traditional, absolute-rated filters.
•Up to 6X the surface area of comparable pleated
capsule filters.
•Can be steam sterilized in-line or autoclaved off-line.
•Delivers fine filtration at high flow rates with
low pressure drops.
•Available in 2 sizes, 4 micron ratings and a variety of
endcap styles (see chart).
•Filters exceed requirements of USP Class VI Plastics testing;
meets USP standards for water extractables.
Suggested Applications
New high performance FiberFlo® HF Capsule Filters are extremely
versatile. They can be used in a wide variety of industries and
applications.
Pharmaceutical Manufacturing
USP Purified Water
Ophthamolics
Serum and other Blood Fractions
Buffers
Growth Media
Fermentation Feed Stocks
Medical and Laboratory
Medical Device Rinsing
Hemodialysis Water Systems
Medical Equipment Rinsewater
FiberFlo® Capsule Membrane Selection
FiberFlo® 30
Offers very fine filtration for gas and venting applications.
Polypropylene hydrophobic hollow fiber filter.
Absolute pore removal rating of 0.03 µm.
Repels water and can be wetted by an aqueous solution with high
surface tension if prewetted with alcohol.
Food and Beverage
Soft Drinks
Mineral and Bottled Waters
Distilled Spirits
Food Products, Makeup and Rinse Waters
Seltzer, Vinegar
FiberFlo® 50
Offers highest degree of control of particulates and microganisims;
recommended for highest pyrogen removal applications.
Absolute pore removal rating of 0.05 µm. Polyphen® polysulphone
membrane.
Will remove 100 percent of endotoxin when challenged with a feed
concentration of 5.0 EU/ml.
Industrial
Deionized Water
Industrial Process Water
Dilute Inorganic Chemical Solutions
6
SQUARE FEET
5
4
3
1858
cm2
2
1
0
557
cm2
FIBERFLO®
S-STYLE
CAPSULE
FIBERFLO®
M-STYLE
CAPSULE
SQUARE CENTIMETERS
5574
cm2
FIBERFLO®
L-STYLE
CAPSULE
Compact Size — Larger Filter Area
32
800-633-3080 / www.mcpur.com / Mar Cor Purification
FiberFlo® 100
Offers best balance of flow, pressure, retentive capacity, pyrogen
removal and cost.
Absolute pore removal rating of 0.1 µm.
Will remove 100 percent of endotoxin when challenged with a feed
concentration of 1.0 EU/ml.
FiberFlo® 200
Offers maximum flow rates without loss of bacteria retention.
Absolute removal of Brevundimonas diminuta is a characteristic
of this filter.
Absolute pore removal rating of 0.2 µm.
Will remove 100 percent of endotoxin when challenged with a feed
concentration of 0.5 EU/ml.
Not designed to remove pyrogens.
FiberFlo® 450
Designed for prefiltration and fluid clarification applications.
Assures maximum protection of downstream sterilizing filters.
Absolute pore removal rating of 0.45 µm.
Provides superior particle control, dirt-holding capacity, and flow rates.
Not designed to remove pyrogens.
FiberFlo Hollow Fiber Capsule Filters
®
F iber F lo ™ H ollow F iber P olysulfone
W ater C apsule F ilters
F iber F lo V E N T F ilter C apsule F ilters
P olyproplene H ollow F iber
PartCapsule Inline/ Micron End-Quantity
Number
SizeCross Flow
Rating
FittingPER CASE
PartCapsule Inline/ MicronEnd-Quantity
Number
SizeCross Flow Rating
FittingPer Case
279-30-001
L
I
0.05
A
6
279-30-020
LV
C
0.03
A
6
279-30-002
L
C
0.05
A
6
279-30-120
LV
C
0.03
B
6
279-30-101
L
I
0.05
B
6
279-30-320
LV
C
0.03
H
6
279-30-102
L
C
0.05
B
6
279-30-022
MV
C
0.03
K
6
279-30-302
L
C
0.05
H
6
279-30-122
MV
C
0.03
L
6
279-30-501
L
I
0.05
H
6
279-30-003
L
I
0.10
A
6
279-30-103
L
I
0.10
B
6
279-30-104
L
C
0.10
B
6
279-30-304
L
C
0.10
H
6
279-30-503
L
I
0.10
H
6
279-30-005
L
I
0.20
A
6
279-30-105
L
I
0.20
B
6
279-30-106
L
C
0.20
B
6
279-30-306
L
C
0.20
H
6
279-30-505
L
I
0.20
H
6
279-30-025
L
I
0.45
A
6
279-30-026
L
C
0.45
A
6
279-30-007
M
I
0.05
A
6
279-30-107
M
I
0.05
D
6
279-30-108
M
C
0.05
L
6
279-30-009
M
I
0.10
A
6
279-30-109
M
I
0.10
D
6
279-30-110
M
C
0.10
L
6
279-30-011
M
I
0.20
A
6
279-30-111
M
I
0.20
D
6
279-30-012
M
C
0.20
L
6
F I LTE R S & M E M B R ANE S
c a ps u le filters
FIBERFLO ENDOTOXIN REMOVAL
HOLLOW FIBER CAPSULE FILTERS
PARTCAPSULE INLINE/
NUMBER
SIZECross FlowGRADE
END-Quantity
FITTING
per case
279-31-001
L
I
EN
A
6
279-31-002
L
I
EN
B
6
279-31-003
L
I
EN
C
6
279-31-005
L
I
EN
E
6
279-31-007
L
I
EN
G
6
279-31-008
L
I
EN
H
6
279-31-101
M
I
EN
A
6
279-31-104
M
I
EN
D
6
279-31-106
M
I
EN
F
6
279-31-110
M
I
EN
J
6
Filters sold in case amounts only
(6 filters per case)
End-fitting options
FiberFlo Code Inlet Description
A
B
C
D
E
F
G
H
J
K
L
1/4 inch NPT
3/8 inch NPT
1/2 inch hose barb
3/8 inch hose barb
1/4 inch NPT
1/4 inch NPT
3/8 inch NPT
Sanitary
Luer
1/4 inch NPT
3/8 inch hose barb
Outlet Description
Filter Type
1/4 inch NPT
3/8 inch NPT
1/2 inch hose barb
3/8 inch hose barb
1/2 inch hose barb
3/8 inch hose barb
1/2 inch hose barb
Sanitary
Luer
Luer
Luer
Inline, Cross Flow
Inline, Cross Flow
Inline, Cross Flow
Inline
Inline
Inline
Inline
Inline, Cross Flow
Inline
Cross Flow
Cross Flow
Identification
Capsule Size (Membrane Surface Area)
Inline/Cross Flow
L = 6.0 ft2
C = Cross Flow
M = 2.0 ft2 I = Inline
Micron Rating/Grade
030 = 0.03 µm* 050 = 0.05 µm
100 = 0.10 µm
200 = 0.20 µm
450 = 0.45 µm
EN =Endotoxin Removal
End-Fitting Option
(see chart above)
Number 279-30-001 is 6.0 square foot capsule filter with inline design, a 0.05 micron rating, a quarter inch NPT inlet and a quarter inch NPT outlet
*available with polpropylene hollow fiber filters only.
Mar Cor P uri f i cati on / www.mcpur.com /
800-633-3080
33
Posiclear ™ Endotoxin Control Cartridge Filters
F I LTE R S & M E M B R ANE S
c artrid ge filters
Bacteria & Endotoxin Control
For Hemodialysis Water Distribution Systems.
Control of bacteria and endotoxin contamination in a hemodialysis
water distribution system is a critical parameter. Selection of a final
filter requires demonstrated endotoxin removal and economical
performance. The Posiclear filter is FDA 510(k) cleared and
complies with AAMI grade water standards according to ANSI/AAMI/
ISO 26722:2009, Water Treatment Equipment for Hemodialysis
Applications.
The Posiclear filter is manufactured with a positively charged pleated
Nylon 6.6 filter membrane and removes bacteria and endotoxin from
the liquid by size exclusion and adsorption mechanisms. To help keep
the water system clean, the filter is compatible with hot water (90°C)
and peracetic acid disinfection procedures.
Posiclear Capsule Advantages
Absolute Bacterial Retention
Reliable 0.2 μm validated performance. Meets FDA definition of 0.2
μm sterilizing grade filter.
Robust Membrane Construction
Pleated membrane design ensures consistent performance to
specifications.
Enhanced Removal of Negatively Charged Contaminants
Posiclear is manufactured with a positively charged Nylon 6.6 filter
membrane. This feature provides enhanced retention of negatively charged
contaminants including bacteria, endotoxins, viruses and nucleic acids.
Performance Engineered Capsule Design
Polypropylene structural components (end caps, adaptors, inner core and
outer cage) are used in the fabrication of Posiclear filter capsules assuring
exceptional thermal, mechanical stability and optimal service life.
Regulatory Compliance & Quality Assurances
Posiclear endotoxin filters are 100% integrity tested during manufacture to
eliminate possible defects.
High Capsule Flow Rates
High pleated surface area offers a high flow rate
(up to 4 gpm / 10” length).
P osiclear F ilter S pecifications
PART NUMBER
WT7002501A020SPD
WT7000301A020SPD
FILTER CONFIGURATION
10” Flat
10” Fin
20” Flat
0.2 μm
FILTER RATING
MAXIMUM FLOW RATE (GPM)
WT7002502A020SPD
222 Housing
CARTRIDGE
4
4
8
MATERIALS OF CONSTRUCTION
Charge-modified Nylon 6.6
MEMBRANE
Polyester
MEMBRANE SUPPORT LAYER
Polypropylene
PLEAT SUPPORT/DRAIN LAYERS
CORE, CAGE, END CAPS, AND ADAPTORS
Polypropylene
END CAP REINFORCING RING
Stainless Steel
O-RINGS
Silicon O-Ring
CARTRIDGE DIMENSIONS
LENGTH (L)
10 7/32” (260 mm)
FILTRATION SURFACE AREA
34
10 3/16” (250mm)
19 31/32” (507mm)
2 ¾ “ (6.9 cm)
DIAMETER
8 ft2 (0.74m2)
800-633-3080 / www.mcpur.com / Mar Cor Purification
8 ft2 (0.74m2)
16 ft2 (1.49m2)
Filter Cartridges
F I LTE R S & M E M B R ANE S
aries filter re p la c ement c artri dg es
These replacement cartridges are designed to fit standard 10-inch and 20-inch housings. A wide
variety of medias are available to handle a number of problem waters.
Features and Benefits
Variety of lengths.
Variety of medias:
- Mixed Bed resin, produces demineralized water.
- Cation Resin, for the softening of water.
- Acid washed carbon, for the removal of chlorine.
- Other medias are available.
2.5” filters fit both standard and Slim Line™ housings.
4.5” filters fit the larger Big Blue® housings.
filter replacement cartridges
Part Product
NumberDescription
per
case
273-21-932
2.5” x 10” Acid Washed Carbon
24
273-21-934
2.5” x 10” Mixed Bed Resin
24
273-21-935
2.5” x 10” Cation Resin
24
273-21-944
2.5” x 20” Mixed Bed Resin
9
273-21-954
4.5” x 10” Mixed Bed Resin
8
273-21-955
4.5” x 10” Cation Resin 8
273-21-921AC-1 Acid Carbon, Aries System
1
273-21-926
1
MR-1 Mixed Resin, Aries System
Note: Filters must be purchased as a complete case.
Looking For
Pressure Gauges?
See pages 148-149.
Looking For
Pressure Switches?
See page 163.
Need To Count Gallons?
See page 152..
Mar Cor P uri f i cati on / www.mcpur.com /
800-633-3080
35
ELGA™ Lab Water Products
F I LTE R S & M E M B R ANE S
lab o rat o ry water systems
Mar Cor Purification is proud to be a distributor of ELGA LabWater
products. ELGA LabWater, a trusted name in water purification systems,
is now teamed up with Mar Cor Purification’s extensive sales and
service network in North America.
ELGA LabWater systems meet the needs of research, science, clinical
and healthcare environments with pure and ultra pure water purification
systems from just a few liters up to several thousands of liters of water
per day. Described below is a brief overview of the portfolio of products
available.
PURELAB®
Purified Water for Laboratory Research and Testing Applications
From simple routine washing and rinsing through to ultra pure water being used for the most critical applications such as ICPMS
and ultra trace analysis, the PURELAB range is designed to offer water purity to match your specific laboratory application. The
PURELAB product line offers a range of products from Type I to Type III and can produce flow rates of 1 to 1000 liters per day.
PURELAB Classic
• The best choice for budget minded laboratories needing top quality water.
• Consistent supply of 18.2 MΩ-cm water, at flow rates
of up to 2 liters per minute.
PURELAB Ultra
• Choice of three ultra pure water systems for chemical
analysis applications.
• Purity beyond 18.2 MΩ-cm with unique PureSure system.
PURELAB 3000
• High volume delivery of pure water for general laboratory use.
• Flexible configuration provides flow rates from 60 to
120 liter per hour of Type II Water.
PURELAB flex
• Uniquely designed dispensing system delivers high quality water at up to 2 liter per minute .
• Point of use display indicates water purity as you dipense.
BIOPURE®
Purified Water for Healthcare Applications
BIOPURE products meet the latest standards and provide point-of-use purified water for small bench-top autoclaves, washer
disinfectors to large or multiple automated washer disinfectors and endoscope reprocessors. The BIOPURE
product line is capable of producing flow rates of 7 to 600 liters per hour.
BIOPURE 60/120
• Delivers 1 or 2 liters per min. of compliant water.
• Meets the latest medical standards.
• Guaranteed bacterial specification of <1 CFU/10ml.
BIOPURE 200/300/600
• Delivers up to 10 liters per min. of compliant water.
• Meets the latest medical standards.
• Guaranteed bacterial specification of <1 CFU/10m.
BIOPURE 7/15
• Delivers 7 or 15 liters an hour of compliant water.
• Meets the latest medical standards (EN15883,
HTM2030/2031, NHS MESc32, MDA/HIS, ISO
15883 part 4, EN285).
• Low running costs are comparable to bottled water costs.
• Guaranteed bacterial specification provided by integrated
purification technologies.
CENTRA®
Pure Water Systems for Centralized Distribution of Laboratory Water
CENTRA products are single compact units that purify, store and distribute water from a single central unit. These pre-designed
standard products are ideal for projects requiring a higher quantity of water packaged in a cost effective design. CENTRA
systems can help take the time and uncertainty out of bulk water production for labs, and their compact design means that
the system can be placed close to work areas.
CENTRA R 60/120
• Complete water purification, storage, control and
distribution systems.
• Delivers up to 60-120 liters per hour (0.25-0.5 gpm)
of makeup water.
• Delivers up to 2.5 gpm of distributed water.
36
CENTRA S 200, R 200
• Centralized purification and distribution systems capable
of supplying pure water to one or more laboratories on a
loop system.
• Capable of delivering 200 liters of pure water per hour
(0.9 gpm) of makeup water and 4.7 gpm of distributed
water from integral tank.
800-633-3080 / www.mcpur.com / Mar Cor Purification
Plymouth Products - Filter Housings
F I LTE R S & M E M B R ANE S
Bi g B lu e ®
Characteristics
•Reinforced FDA-grade polypropylene.
•Can be piped in parallel to obtain higher flow rates.
•Sealing achieved with a 357 Buna-N O-ring.
•Specifically designed with high-flow polypropylene (HFPP) caps.
•Optional pressure relief (pr) button (red) on inlet side of cap.
Specifications
10-inch for flow rates to 25 gpm; maximum pressure 100 psi.
20-inch for flow rates to 50 gpm; maximum pressure 90 psi.
Maximum temperature 100°F.
B ig B lue ® F ilter H ousings
PartProduct
NumberDescription
#10 Big Blue Std.
w/PR
Inlet/Outlet Size (inches)
Filter
Length
285-01-001
#10 BB HFPP w/pr
1
10”
285-01-002
#10 BB HFPP wo/pr
1
10”
285-01-003
#20 BB HFPP w/pr
1
20”
285-01-004
#20 BB HFPP wo/pr
1
20”
285-01-005
#10 BB HFPP w/pr
1-1/2
10”
285-01-006
#10 BB HFPP wo/pr
1-1/2
10”
1228201
#20 BB HFPP w/pr
1-1/2
20”
285-01-008
#20 BB HFPP wo/pr
1-1/2
20”
Stand ar d Hou sing
Characteristics
•Acme square thread closure allows for years of cartridge change outs without failure.
•FDA-grade polypropylene.
•Optional pressure relief (pr) button (red) on inlet side of cap.
•Flow rates from 1 to 20 gpm.
•Sealing achieved with a 241 Buna-N O-ring.
•Leak-proof sealing is accomplished by cap compression against a top seated O-ring.
•Either construction has excellent chemical compatibility.
•Thick walls multiple rings make these housings ideal for industrial applications.
Specifications
Maximum pressure - 125 psi.
Maximum temperature - 125°F.
#20 Blue weight - 4.4 lbs.
#10 Blue weight - 2.9 lbs.
#10 WO/pr
w/MTG cap
S tandard F ilter H ousings
PartProduct
NumberDescription
Inlet/Outlet Size (inChes)
Filter
Length
OS1157219
#10 Blue w/pr, w/mtg brkt cap
3/4
10”
ME40822
#10 Blue wo/pr, w/mtg brkt cap
3/4
10”
285-05-005
#20 Blue w/pr, w/mtg brkt cap
3/4
20”
ME40171
#20 Blue wo/pr, w/mtg brkt cap
3/4
20”
Mar Cor P uri f i cati on / www.mcpur.com /
800-633-3080
37
Plymouth Products - Filter Housings
H i g h tem perature Hou sin gs
F I LT ER S & MEMBRA NES
Characteristics
•Glass reinforced nylon construction.
•Sealing achieved with a Viton® O-ring.
•Standard cap (no pressure relief/mounting bosses).
•Excellent for applications involving organic solvents (avoid ketones),
sea water, alcohol, petroleum and vegetable oil.
•Extra thick glass reinforced nylon construction allows these housings
to be used on a wide range of temperature and/or pressures.
•Economical alternative to stainless and carbon steel vessels.
Specifications
Maximum pressure - 125 psi (8.62 bar)
Maximum temperature - 160°F (71°C)
#10 High Temperature
H igh temperature F ilter H ousings
PartProduct
NumberDescription
Inlet/Outlet Size (inches)
Filter
Length
285-03-001
#10 Red High Temperature wo/pr
3/4
10”
285-03-002
#20 Red High Temperature wo/pr
3/4
20”
S lim - Line ™ Hou sin g s
Characteristics
•FDA-grade polypropylene.
•Sealing achieved with 237 Buna-N O-ring.
•Designed for lower flow rates and space conservation.
•Ideal for mounting in series.
•Caps come with mounting bosses for rapid L bracket mounting.
•Optional pressure relief (pr) button (red) on inlet side of cap.
•Caps and sumps are interchangeable.
•Slim Lines incorporate the same application and chemical resistance features as
the standard 3/4” housings.
•Housings are designed to use the same cartridges as the 3/4” housings.
•Variety of inlet/outlet sizes to choose from.
Specifications
Maximum pressure - 125 psi
Maximum temperature - 125°F
#20 weight - 3.31 lbs.
#10 weight - 1.69 lbs.
#10 slim line w/pr
S lim L ine ™ F ilter H ousings
PartProduct
NumberDescription
38
Inlet/Outlet Size (inches)
Filter
Length
285-09-001
#10 Slim Line Blue/Black w/pr
3/8
10”
ME40580
#10 Slim Line Blue/Black wo/pr
3/8
10”
285-09-006
#20 Slim Line Blue/Black wo/pr
3/8
20”
285-09-007
#10 Slim Line Blue/Black w/pr
1/2
10”
285-09-008
#10 Slim Line Blue/Black wo/pr
1/2
10”
285-09-011
#20 Slim Line Blue/Black w/pr
1/2
20”
285-09-012
#20 Slim Line Blue/Black wo/pr
1/2
20”
800-633-3080 / www.mcpur.com / Mar Cor Purification
Plymouth Products - Filter Housings
O p aq u e filter hou sing s
• All components are polypropylene (except for O-rings).
• Ultra smooth internal surface to avoid bacteria and dirt build-up.
• Buna-N O-rings are standard.
• Available with vent and drain plugs.
Applications
• Caps come with mounting bosses.
• Deionized and reagent grade water.
• Double cap ports available.
• Electronic grade chemicals.
• O-ring sealed poly drain plug in sump.
• Pharmaceutical grade solvents.
• Laboratory equipment.
Specifications
• Electronic etching solutions.
Recommended maximum temperature - 100°F.
• Reverse osmosis or ultrafiltration final
Recommended maximum pressure - 100 psi.
filters.
Color - White
F I LT ER S & MEMBRA NES
Characteristics
O paque F ilter H ousings
PartProduct
NumberDescription
Inlet/Outlet Size (inches)
Filter
Length
285-11-022
12 Opaque (white) 222, w/dbl cap plugs
3/4
12”
285-11-023
20 Opaque (white) 222, w/dbl cap plugs
3/4
20”
* Replaces All-Natural Pure Poly housings.
a c c ess ories
A ccessories for F ilter H ousings
PartProduct
NumberDescription
285-81-001
WB-SS Kit - Stainless For Big Blue Housing (Includes Screws)
285-81-003
UB-1 Kit for 3/4 Housing (U-Shaped Bracket and Screws)
285-81-005
MC-1 Kit for 3/4 Caps w/Bosses (Bracket and Screws)
285-81-007
Kit for 1/2 & 3/8 Housings (Bracket and Screws)
ME60394
SW-1 Spanner Wrench (Plastic - for Slim Line Housings)
ME60392
SW-2 Spanner Wrench (Plastic - for 3/4 Housings)
ME40972
SW-3 Spanner Wrench (Plastic - for #10 Big Blue Housings)
285-83-004
SW-4 Spanner Wrench (Plastic - for #20 Big Blue Housings)
285-85-001
O-Ring BUNA-N FDA Grade - 237 for #5 & Slim Line Housings
285-85-002
O-Ring BUNA-N FDA Grade - 241 for #10, #12, #20 Housings
285-85-003
O-Ring BUNA-N FDA Grade - Big Blue w/ Header
285-87-100
PR Button Kit Assembly
S.S. Mounting Bracket For
Large Housings
The WB-SS Kit is made for the
Big Blue housing.
Mounting Bracket
For 3/4 Housings
This MC-1 Kit
bracket is
made for the
3/4 filters only.
Mounting Bracket For 3/4 Housings
The UB-1 bracket is made for the
3/4 inlet/outlet
housings only.
Constructed
of zinc-plated
steel.
Spanner Wrenches
Use to loosen sump when
changing cartridges.
O-Ring
Used for water tight
seals.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
39
Industrial Filter Housings (nd Series)
F I LT ER S & MEMBRA NES
SI N G LE & M ULT I- ROU ND H OU SING S
Specifically designed for small to large capacity, industrial filtration. Designed for robust ASME Code and Non-Code applications. Engineered
for filtration applications involving chemical systems, high purity water, general pre-filtration and final product purification. Constructed of
corrosion resistant 316 series stainless steel to ensure longevity and system purity. All wetted and external surfaces are electropolished for
trouble free maintenance and easy cleaning.
Design Capabilities
Our Industrial (ND Series) Code rated filter housings are fabricated in
strict compliance with ASME Boiler and Pressure Vessel Code, Section VIII, Division I. All Code rated vessels have the option of carrying
the U-Stamp, R-Stamp and National Board NB Stamp. Our Industrial
(ND Series) Non-Code rated housings are available as a standard
option where cost is the primary driver.
Surface Finishes
All surfaces are electropolished to minimize contamination and ease
of cleaning. Non-electropolished and bead-blasted finishes are also
standard.
Custom-Designed Housings
Our complete design and fabrication expertise allow the production of
filter housings with expedited design and on-time deliveries.
Configurations
1 Round: T-Style
3 to 21 Round: T-Style and Offset.
Materials
316 Series Stainless Steel EPDM, EPR seals standard.
All other compounds available as options.
Closure
1 Round: Heavy Duty TC Sanitary Clamp
3 to 21 Round: Swing Bolt and Nut
Housing Sizes and Filter Length
1 Round: 10, 20, 30, and 40-inch
3 to 21 Round: 10, 20, 30 and 40-inch
Filter Connections
1 to 21 Round: DOE, Code 7 (226),
Code 8 (222), Cup and Post, 020
Pressure Ratings
1 Round: 250 psi (liquid), 125 psi (gas)
Hydrostatic Test Pressure: 375 psi @ 60°F +/- 20°
3 to 21 Round: 150 psi @ 100°F
Hydrostatic Test Pressure: 195 psi @ 60°F +/- 20°
Gasket/O-Ring Materials
Buna-N -40 to +250°F (-40 to +121°C)
Viton® -15 to +400°F (-26 to +204°C)
Silicone (std) -80 to +450°F (-62 to +232°C)
EPDM, EPR -65 to +300°F (-54 to +149°C)
PTFE -65 to +500°F (-54 to +260°C)
Connections
Available in NPT and RF Flange.
CALL FOR PRICING AND AVAILABILITY.
ND SEries
NDH Series
SNV series
SN SEries
40
800-633-3080 / www.mcpur.com / Mar Cor Purification
NDV Series
Sanitary Filter Housings (SN Series)
Engineered to meet the sterile filtration demands of the biotech and pharmaceutical industries. Housing designs with 25 Ra standard internal surface finishes and no wetted threaded connections. Engineered for filtration applications involving chemical systems, high purity, general filtration
and final product purification. Constructed of corrosion resistant 316 series stainless steel to ensure longevity and system purity. Vent and drain
valves configured for easy cleaning and efficient sampling.
Design Capabilities
Our Sanitary (SN Series) Code rated filter housings are fabricated in
strict compliance with ASME Boiler and Pressure Vessel Code, Section VIII, Division I.
Surface Finishes
All surfaces are electropolished to minimize contamination and ease
of cleaning. All wetted surfaces are standard 25 Ra. All non-wetted
surfaces are 32 Ra. Finishes as low as 5 Ra are available as an option.
Custom-Designed Housings
Our complete design and fabrication expertise allow the production
of filter housings with expedited design and on time deliveries.
Sizes
1 Round: 10, 20, 30, and 40-inch
3 to 21 Round: 10, 20, 30, 40-inch.
Filter Connections
Code 7 (226) and Code 8 (222) standard.
Pressure Ratings
1 Round: 250 psi (liquid), 125 psi (gas)
[Steam Jacket: 50 psi].
Hydrostatic Test Pressure: 375 psi
3 to 12 Round: 150 psi @ 200°F and full vacuum
[Steam Jacket: 75 psi] @ 60°F +/- 20°
Hydrostatic Test Pressure: 225 psi @ 60°F +/- 20°
F I LT ER S & MEMBRA NES
SI N G LE & M ULT I- ROU ND H OU SING S
Gasket/O-Ring Materials
Buna-N -40 to +250°F (-40 to +121°C)
Viton® -15 to +400°F (-26 to +204°C)
Silicone (std) -80 to +450°F (-62 to +232°C)
EPDM, EPR -65 to +300°F (-54 to +149°C)
PTFE -65 to +500°F (-54 to +260°C)
Configurations
1 to 21 round: In-Line and T-Style.
Materials
316L Series Stainless Steel Silicone O-Rings standard.
All other compounds available as options.
Closure
1 Round: Heavy Duty TC Clamp
3 to 21 Round: Swing Bolt and Nut
CALL FOR PRICING AND AVAILABILITY.
Sanitary Value Filter Housings (SNV Series)
SI N G LE & M ULT I- ROU ND H OU SING S
Engineered to meet the sterile filtration demands of the food/beverage and pharmaceutical industries. Housing designs with 10-25 Ra internal
surface finishes and no wetted threaded connections. Electropolished mirror finishes. Engineered for quick, frequent change outs with the
proprietary, heavy duty STAClamp closure system. Constructed of corrosion resistant 316L series stainless steel to ensure longevity and system
purity. Vent and drain valves configured for easy cleaning and efficient sampling. Eight different vent and drain configurations.
Design Capabilities
Our Sanitary Value housings (SNV Series) are available as standard
Non-Code where cost is the primary driver. ASME Code requirements
are handled by the sanitary housings (SN Series)
Surface Finishes
All surfaces are electropolished to minimize contamination and ease
of cleaning. All wetted surfaces are standard 25 Ra. All non-wetted
surfaces are 32 Ra. Finishes as low as 10 Ra are available as an
option.
Custom-Designed Housings
Our complete design and fabrication expertise allow the production
of filter housings with expedited design and on time deliveries.
Configurations
3 round: In-Line and T-Style.
Materials
316L Series Stainless Steel Silicone Sanitary Gasket standard.
All other compounds available as options.
Closure
3 Round: Heavy Duty Sanitary TC Clamp. Proprietary
STAClamp System is available as an option.
Sizes
3 Round: 10, 20, 30 and 40-inch
Filter Connections
Code 7 (226) and Code 8 (222) standard.
Pressure Ratings
3 Round: 150 psi @ 200°F and full vacuum
[Steam Jacket: 50 psi].
Hydrostatic Test Pressure: 195 psi @ 60°F +/- 20°
[Steam Jacket: 75 psi] @ 60°F +/- 20°
Gasket Materials
Buna-N -40 to +250°F (-40 to +121°C)
Viton® -15 to +400°F (-26 to +204°C)
Silicone (std) -80 to +450°F (-62 to +232°C)
EPDM, EPR -65 to +300°F (-54 to +149°C)
PTFE -65 to +500°F (-54 to +260°C)
CALL FOR PRICING AND AVAILABILITY.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
41
Industrial Value Filter Housings (NDV Series)
F I LT ER S & MEMBRA NES
SI N G LE & M ULT I- ROU ND H OU SING S
Specifically designed for small and large capacity, general purpose filtration. Designed for extremely cost-sensitive applications. Engineered for
filtration applications involving chemical systems, high purity water, general pre-filtration and final product purification. Constructed of corrosion resistant 304 or 316 series stainless steel to ensure longevity and system purity. All wetted and external surfaces are electropolished for
trouble free maintenance and easy cleaning.
Design Capabilities
Our filter housings are fabricated in Non-ASME Code as standard
where cost is the primary driver.
Surface Finishes
All surfaces are electropolished to minimize contamination and ease
of cleaning. Non-electropolished is also standard.
Custom-Designed Housings
Our complete design and fabrication expertise allow the production
of filter housings with expedited design and on time deliveries.
Specifications
Configurations
1 Round: T-Style 4 to 21 Round: Offset.
Materials
304 and 316 Series Stainless Steel Buna seals standard. All other
compounds available as options.
Closure
1 Round: Cover Nut
4 to 21 Round: V-Band and Swing Bolt
Housing Sizes and Filter Length
1 Round: 10, 20, and 30-inch
4, 5, 7 Round: 10, 20, 30 and 40-inch
12 Round: 20, 30 and 40-inch
21 Round: 30 and 40-inch
Filter Connections
1 Round: DOE
4-21 Round: 222/DOE Universal Cup
Pressure Ratings
1 Round: 250 psi @ 100 °F
Hydrostatic Test Pressure: 325 psi @ 60°F +/- 20°
4 to 21 Round: 150 psi @ 100°F
Hydrostatic Test Pressure: 195 psi @ 60°F +/- 20°
Gasket/O-Ring Materials
Buna-N -40 to +250°F (-40 to +121°C)
Viton® -15 to +400°F (-26 to +204°C)
Silicone (std) -80 to +450°F (-62 to +232°C)
EPDM, EPR -65 to +300°F (-54 to +149°C)
PTFE -65 to +500°F (-54 to +260°C)
Connections
Available in NPT, RF Flange, TC Sanitary and Victaulic®.
CALL FOR PRICING AND AVAILABILITY.
Industrial High Purity Filter Housings (NDH Series)
SI N G LE & M ULT I- ROU ND H OU SING S
Specifically designed for small and large capacity, high purity industrial filtration. Designed for extremely cost-sensitive applications. Engineered
for filtration applications involving chemical systems, high purity water, general pre-filtration and final product purification. Constructed of
corrosion resistant 316L series stainless steel to ensure longevity and system purity on wetted surfaces. All wetted and external surfaces are
electropolished for trouble free maintenance and easy cleaning.
Design Capabilities
Our filter housings are fabricated in Non-ASME Code as standard
where cost is the primary driver.
Surface Finishes
All surfaces are electropolished to minimize contamination and ease
of cleaning. Non-electropolished, satin finish is optional.
Custom-Designed Housings
Our complete design and fabrication expertise allow the production
of filter housings with expedited design and on time deliveries.
Specifications
Configurations
3 to 21 Round: T-Style.
Materials
316 Series Stainless Steel wetted.
EPR, EPDM O-rings standard.
All other compounds available as options.
Closure
3 to 21 Round: Swing Bolt
42
800-633-3080 / www.mcpur.com / Mar Cor Purification
Housing Sizes and Filter Length
3, 5, 6, 7 Round: 10, 20, 30 and 40-inch
12 Round: 20, 30 and 40-inch
21 Round: 30 and 40-inch
Filter Connections
3 to 21 Round: 222/DOE Universal Cup, DOE, Cup & Post, 226
Pressure Ratings
3 to 21 Round: 150 psi @ 200°F
Hydrostatic Test Pressure: 195 psi @ 60°F +/- 20°
Gasket/O-Ring Materials
Buna-N -40 to +250°F (-40 to +121°C)
Viton®-15 to +400°F (-26 to +204°C)
Silicone (std) -80 to +450°F (-62 to +232°C)
EPDM, EPR -65 to +300°F (-54 to +149°C)
PTFE -65 to +500°F (-54 to +260°C)
Connections
Available in TC Sanitary, NPTF, and RF Flange .
CALL FOR PRICING AND AVAILABILITY.
Membrane Elements
Reverse Osmosis Elements
F I L M T E C M embranes
Filmtec membranes are specifically designed to meet the tough
demands of water treatment and water purification. Each element is
engineered for precise use in commerical, industrial, and municipal
applications. These membranes are spiral wound, composite thin
film polyamide (PA). Low pressure tapwater, semiconductor, and
nanofiltration elements are also available. Compared to most other
thin-film composites Filmtec Series membranes are more resistant to
chemical degradation, exhibit higher salt rejection and flow rates, and
provide more consistent performance.
FILMTEC Class
TW = Tapwater - Stablized Salt Rejection - 98-99%
SW = Seawater - Stablized Salt Rejection - 99.4%
BW = Brackish Water - Stablized Salt Rejection - 99%
FF = Full Fit
HP = High Production
HR = High Rejection
HS = Heat Sanitizable
LE, LP or XLE = Low Enegry / Pressure
FILMTEC Operating Limits
pH Range, service: 2-11
Free Chlorine Tolerance (ppm): < 0.1
Max. Feed Turbidity (NTU): 1
Max Feed SDI: 5
Part
Number
ModelPerformanceDimensions
NumberGPD
(inches)
2-inch Membrane Elements
479-02-102
TW30-2026
220
1.8 X 26
479-02-103
TW30-2514
200
2.5 X 14
1229061
TW30-2521
325
2.5 X 21
479-02-201
BW30-2540
4-inch Membrane Elements
479-04-101
TW30-4014
850
2.5 X 40
525
4.0 X 14
479-04-102
TW30-4021
900
4.0 X 21
ME42055
TW30-4040
2,400
4.0 X 40
479-04-201
BW30-4040
2,400
4.0 X 40
479-04-202
BW30LE-4040
2,300
4.0 X 40
479-04-208
HSRO-4040-FF
1,900
4.0 X 40
8-inch Membrane Elements
479-08-203
BW30-400
10,500
8.0 X 40
479-08-444
11,500
8.0 X 40
RO-390-FF
F I LT ER S & MEMBRA NES
FI LMT E c ®
Note: Interconnectors are included in the element price.
Flow rates for individual elements may vary.
DOW - Trademark of The Dow Chemical Company.
which is a trademark of FilmTec Corporation, a wholly
owned subsidiary of the Dow Chemical Company.
Need Membrane Cleaners?
See pages 139-140.
Need Membrane Disinfectant?
See page 138.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
43
Membrane Elements
F I LT ER S & MEMBRA NES
Desal ™ & OSMO ®
RO & UF Membranes
Reverse Osmosis (RO) has proven to be one of the most effective means for removing salts, chemical contaminants, and heavy metals such
as lead, from drinking water. It is a separation process in which feedwater permeates a selective membrane. Dissolved as well as undissolved
materials are rejected by the membrane and carried away in the waste (concentrate) stream. The permeate, or product water, contains only
a fraction of these materials, with TDS - total dissolved solids (a measure of the salt content in water) only present at a nominal 2-6% of the
original feedwater concentration.
Ultrafiltration (UF) is similar to RO and NF, but is defined as a crossflow
process that does not reject ions. UF rejects solutes above 1000 daltons
(molecular weight). Because of the larger pore size in the membranes, UF
requires a much lower differential operating pressure: 10 to 100 psig (0.7 to
6.9 bar). UF removes larger organics, colloids, bacteria, and pyrogens while
allowing most ions and small organics such as sucrose to permeate the
porous structure.
DESAL & OSMO MEMBRANE ELEMENTS
PART
NUMBER
ModelDIMENSIONS
Number
(INCHES)
2-inch RO Membranes
475-02-004
475-02-051
475-02-054
478-02-119
4-inch RO Membranes
OS1117404
OS1119067
475-04-054
478-04-281
478-04-283
4-inch UF Membranes
475-34-051
478-34-121
OSMO-112-HR(PA)
OSMO-192-HR(CA)
OSMO-192-HR(PA)
DESAL CE2026TNB
2 X 26
2 X 39
2 X 39
2 X 26
OSMO-411-HR(CA)
OSMO-411-HR(PA)
OSMO-411-HF(PA)
DESAL AG4040TF
DESAL AG4040F
4 X 40
4 X 40
4 X 40
4 X 40
4 X 40
OSMO-416-UF(PS1)
PW4040C1027
4 X 40
4 X 40
Membrane Parts
A ccessories for membranes
PartProduct
NumberDescription
44
480-50-001
OS1117167
OS1118748
480-10-016
ME60047
4-inch PVC interconnector with Buna-N O-rings for OSMO 411, 416 - standard kit
4-inch PVC interconnector without O-rings for OSMO 411, 416
2-inch interconnector O-ring Buna-N for OSMO 112, 192
2-inch interconnector O-ring Viton® for OSMO 112, 192
2 oz. Tube, Super Lube, Lubricant
800-633-3080 / www.mcpur.com / Mar Cor Purification
P ROC ESS P I P I N G & FI T T I N G S
Process Piping & Fittings
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
45
PVC Schedule 80 Pipe & Fittings
PVC 8 0 p i pe
P ROC ESS P I P I N G & FI T T I N G S
Polyvinyl Chloride (PVC) is the most commonly used plastic material for manufacturing plastic
pipe. It has a relatively high tensile strength and modulus of elasticity and, therefore, is stronger
and more rigid than most other thermoplastics. Joining methods are by solvent cementing,
threading (Schedule 80 only) or flanging. PVC has been used successfully in such areas as
chemical processing, industrial plating, chilled water distribution, salt water, chemical
drainage, and irrigation systems.
PVC PIPE
Specifications
Part
Number
Conforms to ASTM D-1785, Type 1, Grade1.
Conforms to U.S. Product Standard PS 21-70
(supersedes U.S. Commercial Standard CS 207-60
as having the same O.D. dimensions as iron pipe).
NSF approved for pipe sizes 1/2” - 12” for use in
potable water service.
Standard length: 20 feet.
Handles temperatures up to 140°F.
Not affected by soil in buried applications; requires
water-based latex paint for outdoor,
sunlight-exposed installations.
Economical to install and maintain.
Not recommended for Compressed Air or Gases.
MaximumOutside Minimum Wall
Size
Working PSIDiameter
Thickness
(In.)
@ 73°F
(in.)
(in.)
ME50339
3/8
920
.675
.126
ME50079
1/2
850
.840
.147
ME50115
3/4
690
1.050
.154
ME50131
1
630
1.315
.179
ME50038
1 1/4
520
1.660
.191
ME50185
1 1/2
470
1.900
.200
400
2.375
.218
ME50187
2
PVC 8 0 p ip e
Specifications
Type 1, Grade 1 (Cell Class 12454-B) meets ASTM D-1784.
Approved by (NSF) for use with potable cold water.
Meets ASTM D-2464 (threaded fittings).
Meets ASTM D-2467 (socket fittings).
PTFE tape prevents galling of threaded fittings and is required
for leak-tight threaded joints.
Color: Gray.
Not recommended for Compressed Air or Gases.
P V C 8 0 F ittings
TEE SxSxS
Size
(In.)
400-02-001
1/4
400-04-001
1/2
400-02-002
3/8
400-04-002
3/4
ME40389
1/2
400-04-003
1
ME40428
3/4
400-04-004
1 1/2
ME40611
1
400-04-005
2
ME40710
1 1/4
ME40826
1 1/2
ME40777
REDUCING TEE
SxSxS
46
P V C 8 0 F ittings
Part
Number
2
Part
Number
TEE SxSxFT
TEE FTxFTxFT
ME40077
Size
(In.)
1/4
400-03-001 3/4x3/4x1/2
OS1110401
3/8
400-03-002
1x1x1/2
ME40005
1/2
400-03-003
1x1x3/4
ME40385
3/4
400-03-006 1 1/2x1 1/2x3/4
ME40175
1
400-03-007 1 1/2x1 1/2x1
400-05-006
1 1/4
400-05-007
1 1/2
400-05-008
2
800-633-3080 / www.mcpur.com / Mar Cor Purification
PVC Schedule 80 Pipe & Fittings
PVC 8 0 p ip e
P V C 8 0 F ittings
Part
Number
90° ELBOW SxFT
90° ELBOW FTxFT
45° ELBOW SxS
400-06-001
COUPLING SxS
1/4
REDUCER COUPLING
SxS
400-12-001
3/4x1/2
400-12-002
1x1/2
400-06-002
3/8
ME40620
1/2
400-12-003
1x3/4
ME40613
3/4
400-12-004
1 1/4x1
ME40609
1
400-12-005
1 1/2x1
ME40899
1 1/4
400-12-006 1 1/2x1 1/4
ME40829
1 1/2
400-12-007
2x1 1/2
ME40782
2
ME40078
1/4
400-07-001
1/2
ME41003
3/8
400-07-002
3/4
400-13-003
1/2
400-07-003
1
ME40398
3/4
400-07-004
1 1/4
ME40926
1
400-07-005
1 1/2
400-13-006
1 1/4
400-07-006
2
ME40596
1/4
ME40743A
3/8
ME40076
1/2
COUPLING FTxFT
REDUCER COUPLING
FTxFT
400-13-007
1 1/2
400-13-008
2
400-14-001
3/4x1/2
400-14-002
1x1/2
400-14-003
1x3/4
400-14-004
1 1/4x3/4
1 1/2x1
400-14-006
2x1 1/2
400-15-002
3/8
ME40619
1/2
3/4
ME40614
3/4
OS1110360
1
400-08-006
1 1/4
400-14-005
400-08-007
1 1/2
400-08-008
2
1/4
400-15-001
400-09-001
1/4
400-09-002
3/8
ME40621
1/2
ME40167
3/4
ME40176
1
ME41663
1
ME40860
1 1/4
400-09-006
1 1/4
400-15-007
1 1/2
ME40830
1 1/2
400-15-008
2
400-09-008
2
400-10-001
1/4
400-10-002
3/8
ME40187
1
400-10-003
1/2
400-16-004
1 1/4
400-10-004
3/4
ME40833
1 1/2
ME41171
45° ELBOW FTxFT
PartSize
Number(In.)
Size
(In.)
P ROC ESS P I P I N G & FI T T I N G S
90° ELBOW SxS
P V C 8 0 F ittings
400-10-005
1
400-10-006
1 1/4
400-10-007
1 1/2
400-10-008
2
400-11-001
400-11-002
ME40617
1/2
ME40152
3/4
ME40606
1
FEMALE ADAPTER
SxFT
MALE ADAPTER
SxMT
ME40925
1/2
ME40155
3/4
1228205
CROSS SxS
ME40046
2
3/4
ME41298
1
400-33-006
1 1/4
1/4
ME42077
1 1/2
3/8
400-33-008
400-11-006
1 1/4
ME40508
1 1/2
ME40784
2
Mar Cor P uri f i cati on / www.mcpur.com /
2
800-633-3080
47
PVC Schedule 80 Pipe & Fittings
PVC 8 0 F ittin g s
P V C 8 0 F ittings
P V C 8 0 F ittings
PartSize
Number(In.)
PartSize
Number(In.)
P ROC ESS P I P I N G & FI T T I N G S
CAP S
400-17-001
400-17-003
400-17-004
400-17-005
400-17-006
400-17-007
400-17-008
1/4
1/2
3/4
1
1 1/4
1 1/2
2
CAP FT
400-18-001
400-18-002
400-18-003
400-18-004
400-18-005
400-18-006
400-18-007
400-18-008
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
PLUG MT
400-19-001
400-19-002
ME41811
ME41039
ME40405
ME40616
ME41649
400-19-008
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
UNION SxS
(EPDM O-RING)
400-20-001
400-20-002
400-20-003
400-20-004
400-20-005
400-20-006
400-20-007
400-20-008
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
UNION FTxFT
(EPDM O-RING)
400-21-001
400-21-002
400-21-003
400-21-004
400-21-005
400-21-006
400-21-007
400-21-008
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
REDUCER BUSHING
SPxS
400-22-001
400-22-002
400-22-003
ME40427
ME40625
ME40627
400-22-007
400-22-008
ME40735
400-22-010
3/8x1/4
1/2x1/4
1/2x3/8
3/4x1/2
1x1/2
1x3/4
1 1/4x1/2
1 1/4x3/4
1 1/4x1
1 1/2x1/2
continued next column
48
800-633-3080 / www.mcpur.com / Mar Cor Purification
REDUCER BUSHING
SPxS continued
REDUCER BUSHING
SPxFT
REDUCER BUSHING
MTxFT
ME40917
1 1/2x3/4
ME40862
1 1/2x1
ME40847
1 1/2x1 1/4
400-22-014
2x1/2
400-22-015
2x3/4
1228695
2x1
ME40785
2x1 1/4
ME40848
2x1 1/2
400-23-001
400-23-002
ME41167
ME41224
ME40236
ME40401
OS1111829
ME40626
ME40628
OS1110960
ME40631
400-23-012
400-23-013
ME40918
ME40844
1229900
400-23-017
400-23-018
400-23-019
400-23-020
3/8x1/4
1/2x1/8
1/2x1/4
1/2x3/8
3/4x1/4
3/4x1/2
1x3/8
1x1/2
1x3/4
1 1/4x1/2
1 1/4x3/4
1 1/4x1
1 1/2x1/2
1 1/2x3/4
1 1/2x1
1 1/2x1 1/4
2x1/2
2x3/4
2x1
2x1 1/4
400-23-021
2x1 1/2
ME40009
ME40064
ME40087
ME40053
400-24-005
ME40130
400-24-007
400-24-008
ME40624
ME40174
400-24-011
ME40126
400-24-013
400-24-014
3025896
ME40195
ME40509
400-24-018
400-24-019
400-24-020
400-24-021
ME40893
3/8x1/4
1/2x1/4
1/2x3/8
3/4x1/4
3/4x3/8
3/4x1/2
1x1/4
1x3/8
1x1/2
1x3/4
1 1/4x1/2
1 1/4x3/4
1 1/4x1
1 1/2x1/2
1 1/2x3/4
1 1/2x1
1 1/2x1 1/4
2x1/2
2x3/4
2x1
2x1 1/4
2x1 1/2
PVC Schedule 80 Pipe & Fittings
PVC 8 0 F ittin g s
P V C 8 0 F ittings
P V C 8 0 F ittings
Part Size
Number (In.)
PartSize
Number(In.)
1/4”- PIPE NIPPLES
3/8”- PIPE NIPPLES
1/2”- PIPE NIPPLES
3/4”- PIPE NIPPLES
400-37-012
1x1/2
400-37-014
1x3/4
OS1110341
1xCL
400-29-002
400-37-017
1x2
1 1/4x1
400-29-003
1x3
400-37-019
1 1/2x1
400-29-004
1x4
400-37-021
1 1/2x1 1/4
400-29-005
1x5
400-37-024
2x1 1/2
ME40169
1x6
OS1112158
1 1/4xCL
400-25-000
1/4xCL
400-30-002
1 1/4x2
400-25-001
1/4x1 1/2
400-30-003
1 1/4x3
400-25-002
1/4x2
400-30-004
1 1/4x4
400-25-003
1/4x3
400-30-005
1 1/4x5
400-25-004
1/4x4
ME40283
1 1/4x6
400-25-005
1/4x5
400-25-006
1/4x6
400-31-000
1 1/2xCL
400-31-002
1 1/2x2
400-26-000
3/8xCL
400-31-003
1 1/2x3
400-26-001
3/8x1 1/2
400-31-004
1 1/2x4
400-26-002
3/8x2
400-31-005
1 1/2x5
400-26-003
3/8x3
3025528
1 1/2x6
400-26-004
3/8x4
400-26-005
3/8x5
400-26-006
3/8x6
ME40233
1/2xCL
ME40004
1/2x1 1/2
400-27-002
1/2x2
400-27-003
1/2x3
400-27-004
1/2x4
OS1110384
1/2x5
400-27-006
1/2x6
1235820
3/4xCL
ME40380
3/4x1 1/2
400-28-002
3/4x2
400-28-003
3/4x3
OS1110388
3/4x4
400-28-005
3/4x5
400-28-006
3/4x6
1”- PIPE NIPPLES
1 1/4”- PIPE NIPPLES
1 1/2”- PIPE NIPPLES
2”- PIPE NIPPLES
400-32-000
2xCL
400-32-003
2x3
400-32-004
2x4
400-32-005
2x5
ME40279
2x6
P ROC ESS P I P I N G & FI T T I N G S
REDUCER MALE
ADAPTER
MTxS
Key to Abbreviations
S=Socket
ID=Inside Diameter
FT=Female Thread
OD = Outside Diameter
MT = Male Thread
SP = Spigot
Mar Cor P uri f i cati on / www.mcpur.com /
800-633-3080
49
MicroFree Tubing
TM
P F A T U BI N G
PROCESS PIPING & FITTINGS
De-chlorinated, warm water environments will always support micro-biological
growth. Uncontrolled biological growth will lead to the formation of biofilm in clinic
distribution systems. The key is to use a design, materials and procedures that will
minimize growth. Traditionally, clinics have used PVC piping systems. Although
PVC was considered adequate in the past, current thinking is that PVC is not ideal
for tighter bacteria control and it limits the type of sanitants that can be used. The
reason for this is even properly installed PVC fittings can be susceptible to the development of biofilm.
Biofilm is the root cause of bacteria problems. Biofilm is a community of microorganisms covered with a protective layer of slime that can attach anywhere; dead
legs are particularly susceptible. Once established, the microorganisms can flourish
and resist disinfection. The key to control is maintaining conditions that reduce the
formation of biofilm in the first place.
MicroFree™ tubing as compared to PVC piping has a lower potential for buildup of
biofilm because it has a lower surface tension for water, reducing opportunity for
biofilm to attach. As a result, biofilm is more easily removed due to the smooth surface. Independent studies have demonstrated that Perfluoroalkoxy(PFA) has a higher
resistance to biofilm buildup and is far easier to clean than other materials.
Standard Features
•
•
•
•
•
•
•
•
•
Smooth wall prevents biofilm buildup
Smooth wall reduces pressure drop, saving energy
Up to 75% faster rinse out of chemical sanitizers
Fewer and cleaner fittings/couplings
Compatible with all approved sanitization methods
510(k) Regulatory recognition
Specially designed light-blocking shield
50% faster installation over typical PVC material
Zero Dead Leg (ZDL) wall box connection
Extreme Buildup of Biofilm
Applications
Dialysis Clinic Water & Bicarb Distribution System
Labratory Distribution Systems
Pharmaceutical Water Distribution
Semiconductor Water Distribution
Beverage Water Distribution
MicroFree Advantages
PVC surface is relatively rough, providing increased areas for biofilm to attach.
PFA is much smoother, reducing areas for growth and providing a lower pressure
drop.
Glued PVC joints can be irregular and have gaps between surfaces.
PFA joints are designed to minimize buildup of biofilm.
mi c r o free v s p vc c o nne c ti o ns
MicroFree joint connection
showing its smooth-walled
connection.
50
Cross section of PVC joint
connection showing recessed
wall cavity at joint.
800-633-3080 / www.mcpur.com / Mar Cor Purification
MicroFree Joint close-up of PFA
connection showing a smooth, gap
free surface.
PVC Joint close-up of gap that can be
created at joints allowing for build up
of biofilm.
MicroFree Tubing
TM
P F A T UBI N G
MicroFree Tubing vs PVC Piping
M I Cr o free t u bin g is the c lear c h o i c e
MICROFREE
STAINLESS STEEL
PEX
PVC
Surface Smoothness
Excellent
Good
Good
Poor
Quick & Easy
Time Consuming
Quick & Easy
Time Consuming
Short
Average
Average
Long
All
Most
Most
Few
Excellent
Good
Good
Poor
Installation Time
Chemical Rinseout Time
Approved Sanitant Compatibility
Biofilm Buildup Resistance
Cleaner 9 0 ° A n g les w / L i g ht S hiel d I nstalle d
Assured Performance
Proven Results
PFA piping systems are well proven. The Pharmaceutical and Semiconductor industries, who lead in “clean” design, have been using PFA for
years. These industries use a strategy of sanitary design, dead leg elimination and preventive sanitization to control biofilm. MicroFree piping
systems place that same technology into dialysis clinics.
PROCESS PIPING & FITTINGS
PRODUCT ATTRIBUTE
Flexible Sanitization Options
MicroFree PFA Tubing is compatible with the following sanitation methods:
• Hot Water
-PFA piping can be used with hot water disinfection procedures. Up
to 100 psi and 185°F.
• Minncare® Cold Sterilant
• Bleach
• Ozone
S eamless C o nne c ti o ns B etween PVC
Standards
PFA piping materials are accepted by the Centers for Medicare and Medicaid Services (CMS) for use in dialysis piping distribution loops. It also
meets the following standards:
• FDA/USDA
• US Pharmacopoeia Class VI
• 3-A sanitary standards
• National Fire Protection Association Life Safety Code 101
Installation Qualification
Factory trained and certified installation staff specializing in the installation
and maintenance of PFA distribution systems.
Zer o Dea d L e g ( ZD L ) Wall B ox C o nne c ti o n
Mar Cor P uri f i cati on / www.mcpur.com /
800-633-3080
51
Polypropylene Schedule 80 Pipe & Fittings
E n p u re tm 80 Pi pe & F itting s
P R OC E S S P I P I N G & F I T T I N G S
ENPURE pipe is manufactured from virgin, unpigmented polypropylene copolymer, using no
anti-oxidants or plasticizers. It has been successfully used in hospitals, laboratories, universities
and pharmaceuticals plants for low and high purity water applications. ENPURE has been proven
to be superior to other products for this application due to its purity, cost effectiveness, ease of
installation and extensive track record. Pipe is in 10’ lengths, capped at each end, and boxed for
protection and cleanliness.
Features and Benefits
• FDA approved materials.
• Clean polypropylene material-does not support bacterial growth;
avoids contamination from colorants and contamination of raw
material.
• Excellent chemical resistance; pre-clean systems with a variety
of chemicals; resistant to most organic and inorganic chemicals;
conveys high purity chemicals.
• High corrosion resistance.
• Virgin material - low leachable levels.
• Clean joining method - smooth bore provides for low pressure drop
and reduces potential sites for bacterial growth.
• One-eighth the weight of steel.
• Easy to handle and install - reduces installation costs.
• Full product range - Comprehensive range of pipe, fittings and
valves.
• IPS sized.
• Proven system - used for over a decade for conveying ultra pure
water.
ENPURE 80 PIPE
Part
Size
Number
(In.)
MaximumOutside
Working PSIDiameter
@ 68°F
(in.)
Min. Wall
Thickness
(in.)
410-01-001
1/2
150
0.840
0.147
410-01-002
3/4
150
1.050
0.154
410-01-003
1
150
1.315
0.179
410-01-005
1 1/2
150
1.900
0.200
410-01-006
2
150
2.375
0.218
Specifications
Handles corrosive liquids from 40°F through 200°F.
Fittings are designed for socket fusion with a working pressure of 150
psi at 73°F; packaged in ply bags to preserve cleanliness.
Fittings have pressure ratings equal to Schedule 80 pipe.
Valves have pressure ratings of 87 psi at 73°F.
Note:
Warning: Polypropylene threaded connections reduce pressure ratings by
nearly 50%. Designed for low psi applications.
Warning: Under no circumstances should Enpure be pressure tested with
compressed air or other compressed gases.
Key to Abbreviations
S=Socket
FT=Female Thread
MT = Male Thread
SP = Spigot
ID=Inside Diameter
OD = Outside Diameter
52
800-633-3080 / www.mcpur.com / Mar Cor Purification
Polypropylene Schedule 80 Pipe & Fittings
E n p u re tm 80 Pi pe & F ittings
E npure 8 0 F ittings
E npure 8 0 F ittings
PartSize
Number(In.)
90 ELBOW SxS
45 ELBOW SxS
90 BEND ELBOW
SxS (Long Radius)
COUPLING SxS
410-02-001
1/2
410-02-002
3/4
410-02-003
1
410-02-004
1 1/4
410-02-005
1 1/2
410-02-006
2
410-06-001
1/2
410-06-002
3/4
410-06-003
1
410-06-004
1 1/4
410-06-005
1 1/2
410-06-006
2
410-09-001
1/2
410-09-002
3/4
410-09-003
1
410-09-004
1 1/4
410-09-005
1 1/2
410-09-006
2
410-50-001
1/2
410-50-002
3/4
410-50-003
1
410-50-004
1 1/4
410-50-005
1 1/2
410-50-006
2
410-11-001
1/2
410-11-002
3/4
410-11-003
1
410-11-004
1 1/4
410-11-005
1 1/2
410-11-006
2
FEMALE ADAPTER
SxFT
CAP S
410-15-001
1/2 x 1/2
410-15-002
1/2 x 1/4
410-15-003
1/2 x 3/8
410-17-001
1/2
410-17-002
3/4
410-17-003
UNION SxS
®
(VITON O-RING)
410-17-004
1 1/4
410-17-005
1 1/2
410-17-006
2
410-40-001
1/2
410-40-002
3/4
410-40-003
REDUCER BUSHING
SPxS
1
P R OC E S S P I P I N G & F I T T I N G S
TEE SxSxS
PartSize
Number(In.)
1
410-40-004
1 1/4
410-40-005
1 1/2
410-40-006
2
410-22-001
3/4x1/2
410-22-002
1x1/2
410-22-003
1x3/4
410-22-004
1 1/4x1
410-22-005
1 1/2x1
410-22-006
1 1/2x1 1/4
410-22-007 2x1
TOE NIPPLES MTxSP
(6”Length)
410-22-008
2x1 1/4
410-22-009
2x1 1/2
410-25-001
1/2x6
410-25-002
3/4x6
410-25-003
1x6
410-25-004
1-1/4x6
410-25-005
1-1/2x6
410-25-006
2x6
Note:
Not Recommended for Compressed Air or Gases.
PP Flange fittings are available on request.
Mar Cor P uri f i cati on / www.mcpur.com /
800-633-3080
53
PVC Hose
Clear B rai d e d
Applications
P ROC ESS P I P I N G & FI T T I N G S
•Food & beverage dispensing.
•Potable water transfer.
•Deionized water.
•Liquid food products.
•Air and water lines.
•Powdered food products.
•Packaging machines.
Features
•Constructed with non-toxic compounds.
•NSF-51 and NSF-61 certified material.
•Crystal clear - allows visual confirmation of product flow.
•Longitudinally reinforced to reduce elongation under
pressure.
•Light weight.
•Metric sizes available.
•Self-extinguishing.
•Non-marking.
•Silicone-free.
•Non-conductive.
R einforced C lear B raided P V C H ose
Part
Number
Size (in.)
Size (in.)
IDOD
Max. Work
psi @ 70°F
Max. Work
psi @ 122°F
355-02-004
1/4
0.438
250
150
355-02-006
3/8
0.594
225
125
355-02-008
1/2
0.750
200
100
355-02-012
3/4
1.031
150
85
355-02-016
1
1.300
125
75
355-02-020
1 1/4
1.620
100
55
355-02-024
1 1/2
1.938
100
50
H i g h Pu rity
Applications
•Transfer of potable water.
•Transfer of deionized water.
•Induction welding tubing lines.
•Temporary residential water supply lines.
•Water transfer lines for semiconductor manufacturing,
where applicable.
•Applications requiring a non-conductive hose.
Features
H igh P urity P V C H ose
PART
NUMBER
Max. Work
psi @ 70°F
Max. Work
psi @ 122°F
3014354
3/8
0.594
225
125
355-04-008
1/2
0.750
200
100
1228208
3/4
1.031
150
85
1.300
125
75
1.938
100
50
1228209
355-04-024
54
Size (in.)
Size (in.)
IDOD
1
1 1/2
800-633-3080 / www.mcpur.com / Mar Cor Purification
•Tube made with PVC compound certified under NSF-51 and
NSF-61.
•Gray jacket to reduce tendency for algae growth and U.V.
degradation in warm sunny applications.
•Non-marking cover.
•Non-perforated cover.
•Non-conductive compounds.
•Silicone-free.
•Service temperature range: 25 to 150°F (-4° to 65°C).
PVC Hose
Clear vinyl
Applications
Features
•High gloss crystal clear appearance with glass smooth interior to reduce
sediment buildup.
•Non-toxic blue tint to enhance clarity.
•NSF-51 and NSF-61 certified material.
•Self-extinguishing.
•Compound Hardness 73+3 Shore A.
•Service Temperature Range: 25 to 150°F
(-4 to 65°C).
C lear V inyl H ose
Part
Number
Size (in.)
Size (in.)
IDOD
Max. Work
psi @ 70°F
355-06-004
1/4
3/8
55
355-06-006
3/8
1/2
45
355-06-008
1/2
3/4
45
355-06-012
3/4
1
35
355-06-016
1
1 1/4
25
P ROC ESS P I P I N G & FI T T I N G S
•Tubing for laboratories.
•Water distillation lines.
•Deionized water systems.
•Air conditioning / refrigeration drainage.
•Bottling plants.
•Beverage dispensing units.
•Ice making machines
•Printing press equipment.
•Transfer of weak chemical and acids.
•Packaging machines.
H o se Clamp s
Features
STYLE HSS
•All stainless construction 5/16” Hexagon and Screwdriver Slotted Screw.
•SAE 300 series stainless band and housing with SAE 305 series stainless screw.
•Upgraded to four piece construction.
•1/2” band width.
STYLE MAH
•Miniature all Stainless Construction with Combination 1/4” Hexagon and Screwdriver Slotted Screw.
•SAE 300 series stainless band and housing. SAE 305 stainless screw.
•5/16” band width.
hos e cl a mps
Part
Number
Recommended
Hose Size (OD)
Size (in.)
Minimum
Size (in.)
Maximum
348-10-004
3/8”
7/32
5/8
348-10-006
1/2”
7/16
25/32
348-10-008
5/8”
1/2
29/32
348-10-010
3/4”
9/16
1 1/16
348-10-012
1”
11/16
1 1/4
348-10-016
1 1/4”
13/16
1 1/2
348-10-020
1 1/2”
13/16
1 3/4
Mar Cor P uri f i cati on / www.mcpur.com /
800-633-3080
55
Hose Insert Fittings
Di x on “ T u ff- L ite”
Specifications
P ROC ESS P I P I N G & FI T T I N G S
•Nylon fittings are generally acceptable for working pressures
up to 150 PSI at normal room temperatures.
•At very low pressures, temperatures can approach 175°F
with no degradation of the fittings strength.
D ixon “ T D
uff
- L ite
” - L ite
ixon
T uff
Elbow hose
inserts
x MNPT
Model Hose MNPT
Number
Size (in.)
Size (in.)
350-15-001
TLS21
1/4
1/8
350-15-002
TLS22
1/4
1/4
350-15-003
TLS23
1/4
3/8
350-15-004
TLS31
3/8
1/8
350-15-005
TLS32
3/8
1/4
350-15-006
TLS33
3/8
3/8
ME41194
TLS34
3/8
1/2
Male
ADapters
Part
Number
Model MNPT MGHT
Number
Size (in.)
Size (in.)
350-11-001
TA772
1/4
3/4
350-11-002
TA773
3/8
3/4
350-11-003
TA774
1/2
3/4
350-11-004
TA776
3/4
3/4
350-11-005
TA778
1
3/4
Part
Number
Model MNPT FGHT
Number
Size (in.)
Size (in.)
350-13-001
TA972
1/4
3/4
350-13-002
TA973
3/8
3/4
350-15-008
TLS36
3/8
3/4
350-15-009
TLS42
1/2
1/4
350-15-010
TLS43
1/2
3/8
350-15-011
TLS44
1/2
1/2
350-13-003
TA974
1/2
3/4
350-15-012
TLS46
1/2
3/4
350-13-004
TA976
3/4
3/4
Part
Number
Model Hose FGHT
Number
Size (in.)
Size (in.)
FEMale
ADapters
1
350-15-014
TLS63
3/4
3/8
350-15-015
TLS64
3/4
1/2
350-15-016
TLS66
3/4
3/4
350-15-017
TLS68
3/4
hose inserts
x MNPT
D ixon “ T uff - L ite ”
Part
Number
350-15-013
TLS48
1/2
1
Swivel Hose 350-05-001
Inserts*
350-05-002
TCF72
1/4
3/4
TCF73
3/8
3/4
350-15-018
TLS86
1
3/4
350-05-003
TCF74
1/2
3/4
350-15-019
TLS88
1
1
350-05-004
TCF76
3/4
3/4
350-01-002
TN22
1/4
1/4
350-01-003
TN23
1/4
3/8
350-01-004
TN24
1/4
1/2
350-01-005
TN26
1/4
3/4
Part
Number
Model MNPT FGHT
Number
Size (in.)
Size (in.)
350-01-006
TN28
1/4
56
•Nylon fittings should not be used with acid-based fertilizers, bromine, chlorine, fluorine, hydrochloric acid, iodine, nitric acid, phosphoric acid, sulfuric
acid or xylene.
•Nylon should not be used with compressed gas.
•Color: White.
1
350-01-007
TN31
3/8
1/8
350-01-008
TN32
3/8
1/4
350-01-009
TN33
3/8
3/8
350-01-010
TN34
3/8
1/2
350-01-011
TN36
3/8
3/4
350-01-012
TN41
1/2
1/8
350-01-013
TN42
1/2
1/4
350-01-014
TN43
1/2
3/8
350-01-015
TN44
1/2
1/2
Swivel Hose 350-07-001
MNPT*
350-07-002
Part
Number
Hose Inserts 350-03-001
x MGHT
ME40604
TSA72
1/4
3/4
TSA73
3/8
3/4
Model Hose MGHT
Number
Size (in.)
Size (in.)
TCM72
1/4
3/4
TCM73
3/8
3/4
350-01-016
TN46
1/2
3/4
350-03-003
TCM74
1/2
3/4
350-01-017
TN63
3/4
3/8
350-03-004
TCM76
3/4
3/4
350-01-018
TN64
3/4
1/2
350-01-019
TN66
3/4
3/4
OS1113279
TN68
3/4
1
350-01-021
TN86
1
3/4
350-01-022
TN88
1
1
800-633-3080 / www.mcpur.com / Mar Cor Purification
* Supplied with gasket
Hose Insert Fittings
Di x on “ Tu ff- L ite”
dixon “ tuff - lite ”
Part
Number
350-23-005
TSSS333
3/8
350-23-006
TSSS444
1/2
350-23-007
TSSS666
3/4
Part
Number
350-17-010
Thread
Cap**
Hose SIZE
(in.)
Model
Number Thread
TTC7
GHT
Part
Number
White
Rubber
Gaskets
350-19-010
** Gasket not supplied
TRW7
3/4
Part Model FGHT
Number
Number
Size (in.)
SIZE
(in.)
3/4
Model SIZE
Number (in.)
350-09-010
Swivel Nut
Only
TCF
3/4
P ROC ESS P I P I N G & FI T T I N G S
tee insert
D ixon “ T uff - L ite ”
Model
Number
P AR K “ S U RE T HIN G”
Features
•SURE Union Conections.
•Quick Acme Threads - 1-1/4 Turns to Seal or Disconect.
•No awkward cam actions and sudden pressure release.
•No worn or broken cams.
•Can be used with removable inlet screens.
•SURE O-Ring Seal.
•No leaks from crushed or worn gaskets.
•Hand tight connections.
•SURE “IN-OUT” connections.
•Hose barb/adapter options assure mistake free hook-up every time.
•Color: Black.
P ark S ure - T hing H ose F ittings
Part
Number
UMA
MA
HB
ModelProduct
NumberDescription
347-10-001
MA-100
1” Male Adapter
347-10-002
UMA-100
1” Union x Male Adapter
347-10-003
HB-100
1” Union Adapter x Hose Barb
347-10-004
UHB-100
1” Union x Hose Barb
347-10-005
PLG-100
1” Plug
347-10-010
CAP-100
1” Cap
347-07-001
MA-75
3/4” Male Adapter
347-07-002
UMA-75
3/4” Union x Male Adapter
347-07-003
HB-75
3/4” Union Adapter x Hose Barb
347-07-004
UHB-75
3/4” Union x Hose Barb
UHB
PA R K S U R E -T H I N G O - R I N G S
PART
NUMBER
PRODUCT
DESCRIPTION
347-01-014
O-Ring for MA & HB Fittings - 1” & 3/4”
Mar Cor P uri f i cati on / www.mcpur.com /
800-633-3080
57
Process Tubing
TY GO N ® 2 275 H i g h - P u rity T u bin g
Applications
P ROC ESS P I P I N G & FI T T I N G S
•Sensitive fluid transfer applications requiring high purity.
•Sterile filing & dispensing systems.
•Food & beverage processing.
•Laboratory analyticial instrumentation.
•Cosmetic production.
•Infusion sets for pareterals & drugs.
Specifications
Formulation: TYGON 2275. Environmentally safer to dispose.
Characteristics: Plasticizer free, smooth inner surface (inhibits
particulate build-up and bacterial growth), safely dispose of
through incineration, and nontoxic.
Certification: Resin is FDA-compliant (21 CFR 177,1520) and
meets USP Class VI requirements.
Temperature range: -94 to 125°F (-70 to 52°C).
Resistance: Highly resistant to aggressive cleaners and sanitizers.
Sterilize: With ethylene oxide, gamma irradiation, or autoclave for
30 min, 15 psi.
Packaging: 50 ft. rolls.
Color: Transparent.
T Y G O N 2 2 7 5 C lear H igh - P urity T ubing
PartOD
Number
(in.)
ID
(in.)
Avg. Wall
Thickness
Max psi
@ 70 F
367-05-001
3/16
1/16
1/16
49
367-05-002
1/4
1/8
1/16
27
367-05-003
5/16
3/16
1/16
21
367-05-004
3/8
1/4
1/16
16
367-05-005
7/16
5/16
1/16
13
367-05-006
1/2
3/8
1/16
11
P o lyethylene T u bin g
Applications
•Water lines.
•Food and Beverage tubing.
•Air-logic control systems.
•Instrumentation processes.
•Industrial type applications.
•Agricultural type applications.
•Chemical control systems.
Specifications
Characteristics: Low density polyethylene, Food Grade.
Resistance: Has good resistance to alkalines, diluto acid,
ammonia gas, ammonium hydroxide, brine water, and
most aqueous solutions of metallic salts.
Temperature Range: -40 to 135°F (-40 to 57°C).
Non Toxic: Non-contaminating and chemically inert.
Colors: Natural - ASTM D-1248-8F - Type 1 - Class A Category 4; Colors are Class B; Red is FDA Approved.
P olyethylene T ubing
Part
TubeOD
NumberColor
(in.)
Working
psi @ 73°F
Min. Burst
psi @ 73°F
365-14-003
Red
1/4
062
320
800
365-14-004
Blue
1/4
062
320
800
Orange
1/4
062
320
800
365-14-006
Yellow
1/4
062
320
800
365-38-003
Red
3/8
062
160
400
365-38-004
Blue
3/8
062
160
400
365-38-005
Orange
3/8
062
160
400
365-38-006
Yellow
3/8
062
160
400
ME60450
Red
1/2
062
120
300
ME60451
Blue
1/2
062
120
300
ME60452
Yellow
1/2
062
120
300
ME60453
Orange
1/2
062
120
300
366-13-003
Red
5/8
062
120
250
366-13-004
Blue
5/8
062
120
250
366-13-006
Yellow
5/8
062
120
250
3026559
Orange
5/8
062
120
250
58
Avg. Wall
Thickness
3024618
800-633-3080 / www.mcpur.com / Mar Cor Purification
Process Tubing
P A R FLE X N yl on T u bing SE RIES N
®
Specifications
P ROC ESS P I P I N G & FI T T I N G S
Formulation: Flexible nylon tubing is carefully made from high-rade, abrasion resistant, heat
and light stabilized nylon.
Characteristics: Benefits of better flexibility, lighter weight, and resistance to flexural fatigue.
Temperature Range: -65 to 200°F (-54 to 93°C).
Resistance: Resistance to stress cracking greatly exceeds that of ordinary nylon tubing.
Exhibits extremely low level water absorption.
Colors: Natural and Black.
P arflex N ylon T ubing S eries N
Part
TubeOD
NumberColor
(in.)
ID
(in.)
Avg. Wall
Thickness
Working
psi @ 73°F
Min. Burst
psi @ 73°F
368-32-001
Natural
1/4
.180
.035
250
1000
368-32-002
Black
1/4
.180
.035
250
1000
3027077
Natural
3/8
.275
.050
250
1000
368-34-002
Black
3/8
.275
.050
250
1000
368-36-001
Natural
1/2
.375
.062
250
1000
ME41481
Black
1/2
.375
.062
250
1000
N ylon T u bing
Applications
Air logic systems and low-pressure hydraulics.
Water purification machines and systems.
Specifications
Characteristics: Flexible with long-term strength. High Purity. Retains performance integrity
in elevated temperatures.
Temperature Range: -40 to 200°F (-40 to 93°C).
Colors: Red, Blue, Green.
N ylon T ubing
Part
TubeOD
NumberColor
(in.)
ID
(in.)
Avg. Wall
Thickness
Working
psi @ 73°F
Min. Burst
psi @ 73°F
368-16-003
Red
1/4
.180
.035
250
1000
368-16-004
Blue
1/4
.180
.035
250
1000
ME60021
Green
1/4
.275
.050
250
1000
368-24-003
Red
3/8
.275
.050
250
1000
368-24-004
Blue
3/8
.375
.062
250
1000
Need Tubing Cutters?
See page 70.
­Need Tube Fittings?
See pages 60-63.
Mar Cor P uri f i cati on / www.mcpur.com /
800-633-3080
59
Process Fittings
Parfle x ® F ast & T ite ®
Features and Benefits
P R OC E S S P I P I N G & F I T T I N G S
•Install without tools to provide tight, leakproof seal without clamps
or adjustments.
•Unique stainless steel grab ring for tube retention, coupled with a
Buna-N O-ring for positive seal with hand-tight assembly.
•Vibration or tube movement will not break the seal.
•Preassembled in black polypropylene.
•Can be disassembled by hand for fast system drainage.
•Fittings are reusable; parts are easily replaced; O-rings are
standard size.
•Use with clear vinyl tubing or other plastic, glass or metal tubing
for vacuum lines or low pressure lines.
Specifications
Formulation: Black Polypropylene.
Characteristics: Reliable and easy to use.
Certification: Meets FDA requirements for use in transmitting fluids
for human consumption. Meets NSF requirements for food contact
and potable water.
Temperature range: 0 to 212°F (-18 to 100°C).
Resistance: Has resistance to corrosion and
environmental chemicals.
Color: Black.
Working Pressure: See chart, right.
Male Connector
Tube x MT
Female Connector
Tube x FT
76° to 125°F
300
250
200
252
126° to 175°F
300
150
150
50
P arflex F ast & T ite
P arflex F ast & T ite
Part
Size (in.) Size (in.)
NumberODNPT
60
Working Pressure:
Air-Oil-Water Pressure (psi)
Up to 75°F
Tubing O.D.
1/4
300
3/8
250
1/2
200
5/8
150
375-01-001
1/4
1/8
375-01-002
1/4
1/4
375-01-003
3/8
1/8
375-01-004
3/8
1/4
375-01-005
3/8
3/8
375-01-006
3/8
1/2
375-01-007
3/8
3/4
375-01-008
1/2
1/8
375-01-009
1/2
1/4
375-01-010
1/2
3/8
375-01-011
1/2
1/2
375-01-012
1/2
3/4
375-01-020
5/8
1/2
375-01-021
5/8
3/4
375-03-001
1/4
1/8
375-03-002
1/4
1/4
375-03-003
3/8
1/4
375-03-004
3/8
3/8
375-03-005
3/8
1/2
375-03-006
1/2
3/8
375-03-007
1/2
1/2
800-633-3080 / www.mcpur.com / Mar Cor Purification
Part
Size (in.) Size (in.)
NumberODNPT
Male Run
Tee Tube x MT
Male Branch
Tee Tube x MT
375-07-001
1/4
1/8
375-07-002
3/8
1/4
375-07-003
1/2
3/8
375-05-001
1/4
1/8
375-05-002
1/4
1/4
375-05-003
3/8
1/4
375-05-004
3/8
3/8
375-05-005
1/2
3/8
375-05-006
1/2
1/2
Process Fittings
Parfle x ® F ast & T ite ®
P arflex F ast & T ite
F ast & T ite A ccessories
Part
Size (in.) Size (in.)
NumberODNPT
Female Elbow Tube
x FT
375-09-001
1/4
1/8
375-81-001
1/4
375-09-002
1/4
1/4
375-81-002
3/8
375-09-003
1/4
3/8
375-81-003
1/2
375-09-004
3/8
1/4
375-09-005
3/8
3/8
375-09-006
3/8
1/2
375-09-007
3/8
3/4
375-83-001
1/4
375-09-008
1/2
3/8
375-83-002
3/8
375-09-009
1/2
1/2
375-83-003
1/2
375-11-001
1/4
1/8
375-11-002
1/4
1/4
375-11-003
3/8
1/4
375-85-001
1/4
375-11-004
3/8
3/8
375-85-002
3/8
375-11-005
1/2
3/8
375-85-003
1/2
375-11-006
1/2
1/2
375-87-001
1/4 x 3/16
375-87-002
3/8 x 1/4
375-87-003
1/2 x 3/8
S.S. Grab Ring
BUNA-N O-Ring
Nut and Space Set
P R OC E S S P I P I N G & F I T T I N G S
Male Elbow Tube
x MT
PartSize
Number(in.)
P arflex F ast & T ite
Part
Size (in.)
NumberOD
Tee Union Tube
Tube Support
375-13-001
1/4 x 1/4
375-13-002
3/8 x 3/8
375-13-003
1/2 x 3/8
375-13-004
1/2 x 1/2
Fast Assembly
Union Connector Tube
Elbow Union Tube
Bulkhead Connector
Tube
375-15-001
1/4 x 1/4
375-15-002
3/8 x 3/8
375-15-003
1/2 x 1/2
375-15-004
3/8 x 1/4
375-15-005
1/2 x 3/8
375-15-006
5/8 x 5/8
375-15-021
5/16 x 1/4
375-17-001
1/4 x 1/4
375-17-002
3/8 x 3/8
375-17-003
1/2 x 1/2
375-17-004
3/8 x 1/4
375-17-005
1/2 x 3/8
375-17-021
5/16 x 1/4
375-19-001
1/4 x 1/4
375-19-002
3/8 x 3/8
375-19-003
1/2 x 1/2
Step 1
Cut the tube squarely and remove any burrs.
Step 2
Mark the insertion length from end of tube.
Step 3
Loosen nut on fitting until three threads are visible.
Fittings for glass tubes must be disassembled and
the grab ring removed.
Step 4
Moisten end of the tube with water. Push the tube
straight into the fitting until it bottoms on the fitting’s
shoulder. Tighten nut by hand. Additional tightening
should not be necessary, but 1/4 additional turn may
be added if desired. Do not overtighten nut as the
threads will strip and the fitting will not function properly.
A proper assembly will not show the insertion mark extending
beyond the nut. If the insertion mark is visible, then steps
1 through 4 must be repeated.
Step 5
When using clear vinyl tubing or urethane tubing,
it is necessary to use a tube support shown above.
Disassemble the fitting and place the nut, grab ring,
spacer and tube support, in that order, on the tube.
Locate the grab ring at the insertion mark as shown.
Seat the O-ring in the body, then proceed with Step 4.
Mar Cor P uri f i cati on / www.mcpur.com /
800-633-3080
61
Process Fittings
Parfle x ® tr u e S eal ®
TrueSeal fittings find wide acceptance in water conditioning,
filtration, and reverse osmosis. The patented TrueSeal push-toconnect thermoplastic fittings are lightweight, reusable, and connect
to plastic tubing without the use of tools.
P R OC E S S P I P I N G & F I T T I N G S
Applications
•Polyethylene
•Polypropylene
•Nylon
•Polyurethane
•Soft copper tubing
Features and Benefits
•Lightweight and non-corrosive.
•Deep tube seat to reduce side-load leakage.
•Removable collet permits o-ring replacement in the field.
•Tube stem adapters provide wide range of tube-to-port jump size
potential and allow elbows and tees to swivel for positive tube
routing alignment.
Specifications
Formulation: Acetal
Working Pressure: 300 PSI at 73°F
Characteristics: Manufactured from FDA compliant materials and are NSF-51 listed for contact with food and potable water.
Color: Gray
T rueseal F ittings
62
T rueseal F ittings
Part
Size (in.)
Size (in.)
NumberODNPT
Part
Size (in.) Size (in.)
NumberODNPT
Male Connector
Tube X MT
374-06-102
374-06-103
374-06-104
374-06-108
374-06-110
374-06-111
374-06-112
374-06-113
1/4
1/4
3/8
3/8
1/4
3/8
1/2
1/2
1/8
1/4
3/8
1/4
3/8
1/2
3/8
1/2
Female Elbow
Tube X FT
374-08-103
374-08-104
374-08-108
1/4
3/8
3/8
1/4
3/8
1/4
Female Connector
Tube X FT
374-10-103
374-10-104
374-10-108
374-10-109
374-10-110
374-10-111
1/4
3/8
3/8
3/8
1/2
1/2
1/4
3/8
1/4
1/2
3/8
1/2
Male Elbow
Tube X MT
374-04-102
374-04-103
374-04-104
374-04-108
374-04-110
1/4
1/4
3/8
3/8
1/4
1/8
1/4
3/8
1/4
3/8
800-633-3080 / www.mcpur.com / Mar Cor Purification
Process Fittings
Parfle x ® tr u e S eal ®
T rueseal F ittings
T rueseal F ittings
Part
Size (in.)
Size (in.)
NumberODNPT
374-22-103
374-22-104
374-22-105
374-22-106
374-22-107
374-22-108
1/4
3/8
3/8
1/2
1/2
1/2
1/4
1/4
3/8
1/4
3/8
1/2
Male Run Swivel
Tube X MT
374-24-102
374-24-103
374-24-104
374-24-105
374-24-106
374-24-107
1/4
3/8
3/8
1/2
1/2
1/2
1/4
1/4
3/8
1/4
3/8
1/2
Male Tee Swivel
Tube X MT
374-18-103
374-18-104
374-18-105
1/4
3/8
1/2
1/4
3/8
1/2
Tee Union
Tube X Tube
374-14-103
374-14-104
374-14-108
374-14-113
1/4
3/8
3/8-1/4
1/2
Bulkhead Union
Tube X Tube
374-02-101
374-02-104
374-02-105
1/4
3/8
1/2
Tube Cap
374-26-101
374-26-102
1/4
3/8
Plug
374-16-103
374-16-104
374-16-105
1/4
3/8
1/2
T rueseal F ittings
Part
Size (in.)
NumberNPT
Union Connector
Tube X Tube
Elbow Union
Tube X Tube
374-20-107
374-20-108
374-20-109
374-20-112
374-20-113
374-12-103
374-12-104
374-12-108
374-12-109
374-12-110
374-12-111
P R OC E S S P I P I N G & F I T T I N G S
Tube Stem Adapter
Tube X MT
Part
Size (in.)
NumberOD
1/4
3/8-1/4
3/8
1/2-3/8
1/2
Tube O.D.
Insertion
Size
ToleranceDepth
1/4
3/8
3/8-1/4
3/8-5/16
1/2-3/8
1/2
1/4”
+.005
11/16”
5/16”
+.005
13/16”
3/8”
+.005
3/4”
1/2”
+.005
7/8”
Assembly Instructions
1. Cut tubing square and clean.
2. Mark from end of tube the length of insertion (see
table above).
3. Push tube into the fitting until it bottoms out.
4. To remove, depress collet and pull tubing out.
Mar Cor P uri f i cati on / www.mcpur.com /
800-633-3080
63
Quick Disconnect Fittings
hi g h - lo w cou p ling - 3/ 8 fl o w
P R OC E S S P I P I N G & F I T T I N G S
High-Flow Couplings for plastic tubing have close to 1/2”
nominal flow in a 3/8” body size. These single or double shutoff couplings with a large flow capacity, small body size and
are lightweight. They replace bulky, heavy brass and stainless
couplings.
Applications
•Cooling lines.
•Drain lines.
•Filling lines.
•Waste handling.
•Chemical transfer.
•Electronic equipment.
•Photographic chemicals.
•Agricultural chemicals.
Features and Benefits
•Chemical-resistant Polypropylene.
•Food-grade Polysulfone, sterilizable.
•Small-size convenience and lightweight design.
•3/8”, 1/2” and 3/4” ID tube sizes makes for high-volume
fluid handling.
•Poppet valves available in both halves.
•Suitable for food preparation, water filtration and
pharmaceutical processing.
•3/8” and 1/2” NPT thread sizes.
Additional Specifications
Flow Information 3/8” Hose barb: .281” bore
1/2” Hose barb: .375” bore
3/4” Hose barb: .625” bore
Recommended Tubing PVC, Braid-reinforced PVC, Polyurethane.
High-Flow Specifications
Polypropylene Polysulfone
Working PSI
60 psi
125 psi
Operating Temperature
160°F
280°F
Springs
316 SS
316 SS
Seals (O-rings)EPDMEPDM
Color
Light gray, charcoal latch
White, gray latch
Panel Mount GasketEPDMEPDM
Q uick D isconnect F ittings : H I G H - F L O W C O U P L I N G
Polypropylene Polysulfone
Pipe Thread Body
In-Line Hose Barb Body
Product
Description
LengthPartPart
(in.)
Number
Number
3/8” MNPT Shutoff
2.72
347-40-003
347-41-003
1/2” MNPT Shutoff
2.72
347-40-005
347-41-005
3/4” MNPT Shutoff
2.72
347-40-007
347-41-007
3/8” MNPT Straight Thru
2.72
347-40-013
347-41-013
1/2” MNPT Straight Thru
2.72
347-40-015
347-41-015
3/4” MNPT Straight Thru
2.72
ME42076
347-41-017
3/8” ID Hose Shutoff
2.82
347-40-103
347-41-103
1/2” ID Hose Shutoff
2.82
347-40-105
347-41-105
3/4” ID Hose Shutoff
2.97
347-40-107
347-41-107
3/8” ID Hose Straight Thru
2.82
347-40-113
347-41-113
1/2” ID Hose Straight Thru
2.82
347-40-115
347-41-115
3/4” ID Hose Straight Thru
2.97
347-40-117
347-41-117
O-RING
64
800-633-3080 / www.mcpur.com / Mar Cor Purification
Part
Number
Size
(IN.)
347-63-996
3/8
Quick Disconnect Fittings
hi g h - lo w cou p ling - 3/ 8 fl o w
Q uick D isconnect F ittings : H I G H - F L O W C O U P L I N G
Polypropylene Polysulfone
3/8” ID Hose Shutoff
2.82
347-40-203
Bulkhead Panel Mount Hose Barb Body
1/2” ID Hose Shutoff
2.82
347-40-205
Garden Hose Thread Body
Male Pipe Thread Insert
Garden Hose Thread Insert
347-41-205
3/4” ID Hose Shutoff
2.97
347-40-207
347-41-207
3/8” ID Hose Straight Thru
2.82
347-40-213
347-41-213
1/2” ID Hose Straight Thru
2.82
347-40-215
347-41-215
3/4” ID Hose Straight Thru
2.97
347-40-217
-
3/4” MGHT Shutoff
3.07
-
347-41-307
3/4” FGHT Shutoff
3.07
-
347-41-397
3/4” MGHT Straight Thru
2.69
-
347-41-317
3/8” MNPT Shutoff
1.76
347-42-003
347-43-003
1/2” MNPT Shutoff
1.76
347-42-005
347-43-005
3/4” MNPT Shutoff
2.14
347-42-007
347-43-007
3/8” MNPT Straight Thru
1.76
347-42-013
347-43-013
1/2” MNPT Straight Thru
1.76
347-42-015
347-43-015
3/4” MNPT Straight Thru
2.14
ME42075
347-43-017
3/8” ID Hose Shutoff
1.86
347-42-103
Hose Barb Insert
1/2” ID Hose Shutoff
1.86
347-42-105
Elbow Hose Barb Insert
347-41-203
347-43-103
347-43-105
3/4” I D Hose Shutoff
2.01
347-42-107
347-43-107
3/8” ID Hose Straight Thru
1.86
347-42-113
347-43-113
1/2” ID Hose Straight Thru
1.86
347-42-115
347-43-115
3/4” ID Hose Straight Thru
2.01
347-42-117
347-43-117
3/8” ID Hose Shutoff
1.94
347-42-203
347-43-203
1/2” ID Hose Shutoff
1.94
347-42-205
347-43-205
3/8” ID Hose Straight Thru
1.94
347-42-213
-
1/2” ID Hose Straight Thru
1.94
347-42-215
347-43-215
3/4” FGHT Shutoff
1.73
-
347-43-397
3/4” FGHT Straight Thru
1.73
-
347-43-337
3/4” MGHT Shutoff
2.15
-
347-43-367
3/4” MGHT Straight Thru
2.14
-
347-43-317
Mar Cor P uri f i cati on / www.mcpur.com /
P R OC E S S P I P I N G & F I T T I N G S
Product
LengthPartPart
Description (in.)Number
Number
800-633-3080
65
Quick Disconnect Fittings
L ow - Flo w Cou p ling - 1/ 4” flow
Low Flow quick-couplings make reliable leak-free plastic
tubing connections, and add convenience to any fluid- or
gas-handling system. The two-part coupling consists of a
female body and a male insert.
P R OC E S S P I P I N G & F I T T I N G S
Applications
•Medical devices
•Plating solutions
•Mild & Caustic Chemicals
•Beverage dispensing
Features and Benefits
• Simple one-hand operation.
- Press insert into body to lock.
- The positive latch action makes a leak-free
connection.
- Handy thumb latch for one-hand disconnect.
• Valve or straight-thru flow.
- Valves stop flow when coupling halves are
disconnected.
- Straight-through coupling halves with no valves
are used for maximum flow.
• Material selections.
- Use Delrin Acetal for mild chemicals.
- Polypropylene couplings for chemical resistance.
• Built-in end fittings for tubing.
- Use hose barbs for flexible tubing: vinyl, Tygon,
Polyurethane, Neoprene, Silicone and Viton®.
- Use ferruless compression ends for semi-rigid
tubing (Polyethylene and Nylon).
- Pipe thread models require no tape or sealant.
Low-Flow Specifications
Delrin AcetalPolypropylene
Working Pressure, psi
Vacuum to 120 at 75°F
Vaccuum to 120 at 75°F
Operating Temp. °F
-40 to 180
32 to 160
Springs & Latches
Stainless Steel
Stainless Steel
Seals
Buna-N
EPR
Color
WhiteAlmond
Q uick D isconnect F ittings : L ow - F low C oupling
AcetalPolypropylene
Pipe Thread Body
In-Line Hose Barb Body
In- Line Ferruless Compression Body
66
ProductPartPart
Description
Number
Number
1/4” MNPT Shutoff
347-60-002
347-61-002
3/8” MNPT Shutoff
OS1162024
347-61-003
1/4” MNPT Straight Thru
347-60-012
-
3/8” MNPT Straight Thru
ME42079
-
1/4” ID Hose Shutoff
347-60-102
347-61-102
3/8” ID Hose Shutoff
ME40693
347-61-103
1/4” ID Hose Straight Thru
347-60-112
-
3/8” ID Hose Straight Thru
347-60-113
-
1/4” OD .170”ID Shutoff
347-60-302
-
3/8” OD .250”ID Shutoff
ME40465
347-61-303
1/4” OD .170”ID Straight Thru
347-60-312
-
3/8” OD .250”ID Straight Thru
347-60-313
-
800-633-3080 / www.mcpur.com / Mar Cor Purification
Quick Disconnect Fittings
L ow - F lo w Cou pling - 1/ 4” flo w
Q uick D isconnect F ittings : L ow - F low C oupling
AcetalPolypropylene
Bulkhead Panel Mount Hose
Barb Body
Bulkhead Panel Mount Ferruless
Compression Body
Male Pipe Thread Insert
1/4” ID Hose Shutoff
347-60-202 347-61-202
3/8” ID Hose Shutoff
347-60-203 347-61-203
1/4” ID Hose Straight Thru
347-60-212
-
3/8” ID Hose Straight Thru
ME40716
-
1/4” OD .170” ID Shutoff
347-60-402
-
3/8” OD .250” ID Shutoff
1/4” OD .170” ID Straight Thru
347-60-412
-
3/8” OD .250” ID Straight Thru
347-60-413
-
1/4” MNPT Shutoff
3/8” MNPT Shutoff
1/4” MNPT Straight Thru
Hose Barb Insert
Elbow Hose Barb Insert
Straight Ferruless Compression Insert
ME40513 347-61-403
P R OC E S S P I P I N G & F I T T I N G S
ProductPartPart
Description
Number
Number
ME40712 347-63-002
347-62-003
-
ME40717 347-63-012
3/8” MNPT Straight Thru
347-62-013
-
1/4” ID Hose Shutoff
347-62-102 347-63-102
3/8” ID Hose Shutoff
ME40603 347-63-103
1/4” ID Hose Straight Thru
347-62-112 347-63-112
3/8” ID Hose Straight Thru
1228338 347-63-113
1/4” ID Hose Shutoff
347-62-202 347-63-202
3/8” ID Hose Shutoff
ME42051 347-63-203
1/4” ID Hose Straight Thru
347-62-212 347-63-212
3/8” ID Hose Straight Thru
347-62-213 347-63-213
1/4” OD .170”ID Shutoff
347-62-302
3/8” OD .250”ID Shutoff
347-62-303 347-63-303
-
1/4” OD .170”ID Straight Thru
347-62-312
-
3/8” OD .250”ID Straight Thru
347-62-313
-
O-RING
Note: Elbow Ferruless Compression Insert and Panel Mount Hose Barb
Insert Fittings available upon request.
Part
Number
Size
(IN.)
1/4
347-63-995
Mar Cor P uri f i cati on / www.mcpur.com /
800-633-3080
67
Cam Lever Couplings
B an j o ®
P R OC E S S P I P I N G & F I T T I N G S
68
Designed to handle chemicals, liquids and other dry products,
these quick-disconnect and quick-coupling ensure fast, positive
leak-proof connections for hoses and pipes without threading,
twisting or using lugs. These couplings connect without tools and
without strain in seconds. Begin by ordering any adapter and
coupler of the same size to give the desired combination of end
connections. Simply insert the adapter into the coupler and pull
down the cam arms to lock the assembly.
Features and Benefits
•S
tainless steel rings, arms and pins.
• Interchangeable with other types of cam lever couplings.
lass-filled polypropylene for rugged strength and durability.
•G
•N
PT thread standard.
PDM gaskets standard.
•E
•O
perating conditions: 3/8” through 2” - 100 psi at 0°F; 125 psi
at 70°F; 70 psi at 150°F.
C am L ever F ittings
Part StockSize
Number Number(In.)
Female Coupler
x Male Thread
ME42122
075B3/4
3/4
347-12-015 100B 1
347-12-016
125B
1-1/4
347-12-017
150B
1-1/2
Female Coupler
x Hose Shank
Female Coupler
x Female Thread
347-12-032
075D
3/4
347-12-035 100D 1
347-12-036
125D
1-1/4
347-12-037
150D
1-1/2
Male Adapter
x Female Thread
347-12-042
075A3/4
3/4
347-12-045 100A 1
347-12-046
125A
1-1/4
347-12-047
150A
1-1/2
Male Adapter
x Hose Shank
ME42123
075E
3/4
347-12-020 100E 1
347-12-030
125E
1-1/4
347-12-040
150E
1-1/2
Male Adapter
x Male Thread
800-633-3080 / www.mcpur.com / Mar Cor Purification
347-12-022
ME40864
347-12-026
347-12-027
347-12-052
ME40863
347-12-056
347-12-057
075C
100C
125C
150C
075F
100F
125F
150F
3/4
1
1-1/4
1-1/2
3/4
1
1-1/4
1-1/2
Installation Supplies
So lv ent Cements
IPS® Weld-On® 717 PVC
TM
Features and Benefits
P R OC E S S P I P I N G & F I T T I N G S
•Clear, heavy-bodied, medium-setting, high strength for all schedules and classes
through 12” diameter.
•Somewhat slower curing rate than 711, allowing more open time.
•Excellent gap filling properties.
•Absorbs less moisture under damp or wet conditions than 711.
PVC - Solvent Cement
Part NumberProduct Description
349-02-600
1/2 - PT, 717 PVC Heavy, Clear Cement
IPS® Weld-On® 2714 CPVC
TM
Features and Benefits
•Orange, heavy-bodied, medium-setting, CPVC cement for all schedules and
classes through 12” diameter.
•Medium set allows more working time in warm weather.
•Good gap filling properties.
•Meets ASTM D-2846 & F-493, NSF and UPC standards.
•Low VOC solvent cement.
CPVC - Solvent Cement
Part NumberProduct Description)
349-02-605
1 - PT, 2714 CPVC Heavy, Orange Cement
Primer
IPS® Weld-On® P-70 - PVC/CPVC
TM
Features and Benefits
•Most aggressive primer available to penetrate and soften bonding surfaces of pipe
and fittings.
•Application temperature 40°F to 110°F. Excellent for cold weather applications.
•Meets ASTM F-656 and NSF standards.
•Use with both low VOC and standard cement.
•Color: Clear
•For use with all types and schedules of PVC and CPVC.
PVC/CPVC Primer
Part NumberProduct Description
349-06-600
1/2 - PT, P70 PVC/CPVC, Primer
Note: Do Not Use Primer or Cleaner as a Thinner for Cements.
Mar Cor P uri f i cati on / www.mcpur.com /
800-633-3080
69
Installation Supplies
P T F E T hrea d T a p e
Features and Benefits
P R OC E S S P I P I N G & F I T T I N G S
• “Must” for threaded plastic and SS fittings.
• Prevents galling.
• Ease assembly of pipe and joint.
• Self lubricated and never freezes like paste dopes.
PTFE Tape
Part NumberProduct Description
349-10-100
1/2 x 520 PTFE Tape, Roll
Plasti c Pi p e C u tters
Features and Benefits
• Designed to cut PVC, PE, ABS, vinyl, poly pipe, tubing, and more.
• Ratchet style allows for speed and accuracy.
• Single hand operation.
• Replacement blades available.
• Made of durable materials.
• Larger diameter size cutters up to 2-3/8” available.
• Approximate weight for either model is 2-1/2 lbs.
PVC Pipe Cutters
Part NumberProduct Description
349-12-200
Cutter, No. 5290 Ratchet Style, for 1/8” to 1 - 1/2”
349-12-230
Replacement Blade No. 5300
349-12-205
Cutter, No. 7290 Ratchet Style, for 1/8” to 2 - 3/8”
349-12-235
Replacement Blade No. 7300
Plasti c Ho se & T u be C u tters
Features and Benefits
• Designed to cut O.D. soft plastic tubing and hose.
• Scissors style allows for quick cuts on tubing requirements.
• Made of durable materials.
• Replacement blades available.
• Approximate weight is 1 lb.
Hose & Tubing Cutters
Part NumberProduct Description
349-12-100
Cutter, No.5191 Scissors Style, for 1/8” to 1 - 1/2”
349-12-130
Replacement Blade No. 5299
Lu bri c ant
Features and Benefits
• Parker Super O-Lube® silicone base lubricant for plastic and rubber.
• Compatible with all elastomers.
• Non-toxic and non-irritating under normal conditions.
• Will not clog micron filters.
• Useful from 65°F to 400°F.
• Moisture resistant.
Lubricant
Part NumberProduct Description
ME60047
70
2 oz. Tube, Super Lube Silicone “O-Lube”
800-633-3080 / www.mcpur.com / Mar Cor Purification
Installation Supplies
Pi p e S u p p ort
Applications
•Plastic Pipe - PVC, CPVC, ABS, PE, PP, PVDF, PB, and fiberglass.
•Metal Pipe - Galvanized carbon steel, SS, Red & Yellow Brass & Copper and
Aluminum.
•Copper Tube - ACR, Type K,L,M and DWV.
•Plastic Tube - PB, PVC, CPVC, & PE.
•Other Tube Metals - Galvanized steel, SS, and Aluminum.
Features and Benefits
C lic P ipe H angers
•Highly versatile - works with all types of pipe and tube.
•Easy to Use - requires one installer.
•Economical - installation time reduced by 35%.
•Highly Adaptable - attached to almost any surface.
•Corrosion Resistant - durable Nylon 12 Grilamid®.
•Reusable - design changes can be easily accommodated.
•Complete - comes with full line of accessories.
•Appearance - neat and compact design.
Specifications
PartPipePipe
Number
Size (in.)O.D. (in.)
Formulation: Nylon 12 Grilamid .
Characteristics: fulfills FDA requirements for plastics which come into contact
with foodstuffs. Acceptable under ASTM D792, ASTM D570, and others.
Temperatures: -40°F to +180°F continuously, and to +225°F intermittently
with installation temperature to -5°F.
Resistance: call for details on chemical resistance.
Color: Medium gray.
®
345-76-012
1/4
.540
345-76-017
3/8
.675
345-76-020
1/2
.840
345-76-025
3/4
1.050
345-76-032
1
1.315
345-76-040
1-1/4
1.660
345-76-047
1-1/2
1.900
345-76-059
2
2.375
P R OC E S S P I P I N G & F I T T I N G S
The clic ® system allows you to hang pipe in half the time, since one man can
handle a full pipe-length where it previously required two men. The one-piece
nylon construction comes with only one mounting hole, and can be mounted
directly on concrete, cinder block, brick or wood. Once the supports are
screwed in, simply push the pipe in and it automatically locks into place. Clic
hangers can be re-used or relocated if there is a mistake in layout or piping.
They open with 1/4 turn of a screwdriver.
C lic T ube H angers
Part
Number
Tube
Tube
Size (in.)O.D. (in.)
345-78-010
1/4
.375
345-78-012
3/8
.500
345-78-015
1/2
.625
345-78-017
5/8
.750
345-78-020
3/4
345-78-028
.875
1
1.125
345-78-032
1-1/4
1.375
345-78-040
1-1/2
1.625
345-78-051
2
2.125
C lic A ccessories
PartProduct
NumberDescription
345-79-101
Clic Flange, SS-316, for 3/8”-2”, fits into base of clic
345-79-102
Clic Adapter, SS-316, 1/4”-20 MNPT x 3/8”-16 FNPT
345-79-103
Clic Stud, SS-316, 1/4”-20, 1/2” long
345-79-109
Clic Strutcatcher, Nylon-12, use w/Steel Struts only, all sizes
Mar Cor P uri f i cati on / www.mcpur.com /
800-633-3080
71
Installation Supplies
Pi p e S u p p ort
Hangers
M O U N T I N G P L AT E
Economical iron hangers mount to 3/8”-16 threaded rod. Zinc-plated hangers give you
more corrosion resistance.
P R OC E S S P I P I N G & F I T T I N G S
G A LVA N I Z E D S P L I T R I N G H A N G E R S
PART
NUMBER
FOR PIPE
SIZE (IN.)
345-80-003
3/8
345-80-005
1/2
345-80-007
3/4
345-80-010
1
345-80-012
1-1/4
345-80-015
1-1/2
345-80-020
2
345-80-025
2-1/2
PART
NUMBER
FOR PIPE
SIZE (IN.)
MATERIAL
345-80-303
3/8
Galvanized
345-80-304
3/8
Copper
copper split ring hangers
PARTfor pipe
NUMBER
SIZE (IN.)
345-80-105
1/2
345-80-107
3/4
345-80-110
1
All - T hr e a d R od
PART
NUMBER
SIZE (IN.)
3/8-16
343-09-003
Unistrut
U nistrut C lamps
Unistrut pipe supports and Unistrut pipe clamps
are designed for the support of electrical and
mechanical services. Pipe clamps are finished with
Electro-galvanized material. Slotted channel is
available as either galvanized or fiberglass.
PARTPIPE
NUMBER
SIZE (IN.)
SIZE
(IN.) OD
345-50-005
1/2
840
345-50-007
3/4
1.050
345-50-010
1
1.315
345-50-012
1-1/4
1.660
345-50-015
1-1/2
1.900
345-50-020
2
2.375
S lotted C hannel
PARTCHANNEL NUMBERDEPTH (IN.)
345-50-110
1-5/8
0.105
Galvanized
1228025
1-5/8
0.105
Fiberglass
We install and service piping systems, reverse osmosis machines,
conditioning equipment, filtration systems, and much more. Our
trained service technicians are ready to install your project or
trouble-shoot your problem. We have one of the largest service
fleets in the United States with over 50 fully-stocked vehicles in
operation. Contact us today for all your high purity system install
and service requirements.
Need Installation or Service?
Contact us at 1-800-633-3080.
800-633-3080 / www.mcpur.com / Mar Cor Purification
Material
Installation Services
72
THICKNESS (IN.)
Val v es
Valves
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
73
True Union Manual Ball Valves
A SA H I - typ e 21
Applications
•Handles mild and aggressive corrosive chemicals -Sulfuric and hydrofluoric acid, Nitric acid, Oxidizing chemicals, Caustics, Solvents, Halogens and other varoius
hostile fluids.
•Water treatment and purification systems.
•High purity type applications.
•Industrial and Commercial grade requirements.
•Manufacturing Plants.
Valves
Features and Benefits
•True Union design permits installation or repair without expanding the pipeline.
•Sizes range from 1/2” to 2”. Larger sizes available upon request.
•Available in PVC, CPVC, and PP.
•Blocks in two directions, upstream and downstream, leaving full pressure on
opposite side.
•PTFE seats with elastomeric backing cushions ensure bubble-tight shut-off and a
low fixed torque, while at the same time compensating for wear.
•Available with EPDM O-rings. Call for other materials.
•Two sets of end connectors (socket and threaded) included with all PVC and
CPVC models in 1/2”to 2”.
•Pressure rated up to 230 psi for PVC and CPVC at 70°F. Rated at 150 psi for PP
at 85°F.
•Double O-ring seals on stem for an added protection.
•Full bore, sizes 1/2” — 2”.
•Built-in spanner wrench on the handle for valve disassembly and assembly.
•CPVC threaded end connectors on sizes 1/2” — 1” come with stainless steel
reinforcing rings.
•Integrally molded base pad to mount valves securely or
panel mounting.
•Integrally molded ISO mounting pad for both manual
and actuated operations.
A S A H I type 2 1 B all V alves
PVC (EPDM, Soc/Thd)CPVC (EPDM, Soc/Thd)PP (EPDM, Thd)
Part SizePart
SizePart
Number (in.)Number (in.) Number
Size
(in.)
425-01-161
1/2
425-01-261
1/2
425-01-301
1/2
425-01-162
3/4
425-01-262
3/4
425-01-302
3/4
425-01-163
1
425-01-263
1
425-01-303
1
425-01-164
1-1/4
425-01-264
1-1/4
425-01-305
1-1/2
425-01-165
1-1/2
425-01-265
1-1/2
425-01-166
2
Caution:
Never remove valve from pipeline under pressure.
Always wear protective gloves and goggles.
Watch out for trapped fluid in valve. It is safe to close valve before removing it from the pipeline.
E N PU RE tm
Applications
• Hospitals, Universities, and Laboratories.
• Chemical Plants.
• Industrial Manufacturing processes.
• Food and Pharmaceutical Plants.
• Low purity to high purity 18 megohm water needs.
• Water purification systems.
Features and Benefits
• True Union design permits installation or repair without expanding the pipeline.
• Sizes range from 1/2” to 2”.
• Available only in Polypropylene (PP).
• Blocks in two directions, upstream and downstream, leaving full pressure on
opposite side.
• PTFE seats.
• Available with VITON® O-rings.
• End connectors are socket only (heat fused).
• Rated 87 psi at 73°F for PP.
74
800-633-3080 / www.mcpur.com / Mar Cor Purification
E N PU R E B all Val v es
PP (VITON®, Soc)
Part
Size
Number
(in.)
425-03-311
1/2
425-03-312
3/4
425-03-313
1
425-03-314
1-1/4
425-03-315
1-1/2
425-03-316
2
Compact Manual Ball Valves
A SA H I - Omni ®
Features and Benefits
A S A H I O mni - C ompact B all V alves
PVC (threaded)
Part
Number
CPVC (threaded)
Part Size
Size
(in.)Number (in.)
425-04-101
3/8
425-04-201
3/8
1237914
1/2
425-04-202
1/2
425-04-103
3/4
425-04-203
3/4
425-04-104
1
425-04-204
Valves
•Economical valve for basic water applications.
•Sizes from 3/8” to 2”.
•Models are available in thread connections. Socket connection
available upon request.
•Molded-In-Place Valve.
•Dry construction.
•Corrosion-resistant Type 1 PVC or CPVC body and ball.
•Compact unibody construction.
•EPDM stem O-ring.
•All sizes rated for full vacuum.
•Bodies are available in PVC or CPVC.
•Rated for 150 psi at 120°F for PVC & CPVC.
•Replacement red handles are available (see chart).
1
425-04-105
1-1/4
425-04-205
1-1/4
425-04-106
1-1/2
425-04-206
1-1/2
3-Way Manual Ball Valves
A sahi - ty p e 23
Features and Benefits
•Sizes available from 1/2” to 2”.
•Blocks from left to right union ports, leaving full pressure on the opposite end of
valve.
•“L” ported ball permits flow from common port to either left or right port to OFF
position.
•Eliminates need for additional valve and tee.
•True Union design on all three ports.
•Blow-out proof bottom entry stem.
•Available with Viton® O-rings.
•All sizes rated for full vacuum service.
•Available in PVC and CPVC (PP and PVDF are available upon request).
•Models are available in threaded, socket, flanged (ANSI), Butt.
•Range 150 psi at 120°F for PVC and CPVC; 150 psi at 85°F for PP.
A S A H I type 2 3 3 - W ay B all V alves
PVC (Viton®, Thd)CPVC (Viton®, Thd)
Part
SizePart
Size
Number
(in.)Number
(in.)
PVC (Viton®, Soc)CPVC (Viton®, Soc)
Part
SizePart
Size
Number
(in.)Number
(in.)
425-05-161
425-05-162
425-05-163
1/2
3/4
1
425-05-261
425-05-262
425-05-263
1/2
3/4
1
425-05-167
425-05-168
425-05-169
1/2
3/4
1
425-05-267
425-05-268
425-05-269
Mar Cor Puri f i cati on / www.mcpur.com /
1/2
3/4
1
800-633-3080
75
Laboratory Valves
A sahi - L ab cock ® B all Val ve
Valves
Features and Benefits
•Size available - 1/4”.
•Perfect for laboratory use, process
control monitoring or sampling.
•Corrosion-resistant thermoplastic
•Calibrated flow indicator.
•Lever-type handle for ease of
adjustment.
•1/4” turn operation.
•Rated at 120°F up to 150 psi,
water, non-shock.
•Body material is available in
PVC only.
A S A H I L abcock B all V alves
PVC (EPDM)
Part
Size
valve
Number
(in.)end
425-06-101
1/4
FPT x FPT
425-06-102
1/4
MPT x MPT
ME40291
1/4
MPT x HB
425-06-104
1/4
HB x HB
ME40240
1/4
FPT x MPT
425-06-106
1/4
FPT x HB
Marqu est Nee dle Valve
Features and Benefits
•Sizes range from 1/4” to 1/2”.
•Choice of materials - PVC.
•Broad Chemical resistance, high purity.
•Universally adaptable to pipe and tube.
•All end connections are FNPT.
•Simple panel mount system.
•Precision ground seats keep needle from being
destroyed from over torquing when closing.
•Visual control of rising stem.
•Maximum pressure 200 psi @ 73°F.
M A R Q U E ST N E E D L E VA LV E S
PVC (GLOBE)
PART
NUMBER
SIZE
(IN.)
425-09-101
1/4
425-09-102
3/8
425-09-103
1/2
M u r - lo k B all Val ve
®
Features and Benefits
•Variety of sizes available.
•Constructed of NSF approved materials.
•Full flow rate to POU system.
•All plastic design eliminates corrosion.
•Easy installation with compression ends.
•For use on Copper Tube , Polybutylene,
Chrome, CPVC Tube, and PE Tubing.
•Rated 0-150 psi @ 33°F-140°F.
76
800-633-3080 / www.mcpur.com / Mar Cor Purification
M ur - lok B all V alve S
Part Tube TubeValve
NumberO.D. (in.)
I.D. (in.)
End
425-08-908
1/2
3/8
1/4” FNPT
425-08-909
1/2
3/8
1/4” MNPT
425-08-910
1/2
3/8
1/4” JG Speedfit
425-08-911
1/2
3/8
3/8” FNPT
425-08-912
1/2
3/8
3/8” MNPT
425-08-913
1/2
3/8
3/8” JG Speedfit
425-08-914
1/2
3/8
1/2” JG Speedfit
425-08-918
5/8
1/2
3/8” FNPT
True Union Ball Check Valves
A sahi - Ball Che ck Valv e
Valves
Features and Benefits
•Sizes available from 1/2” to 2”. Larger sizes are available.
•True union design eliminates the need for flanges and permits
installation or repair without expanding the pipeline.
•Uniseat/Seal of EPDM or Viton®.
•May be used either vertically or horizontally.
•Models available in PVC and CPVC (PP and PVDF are also available).
•Excellent flow characteristics.
•Minimum shut-off is 5 psi.
•All sizes rated for full vacuum service.
•Rated 150 psi @ 120°F for PVC and CPVC.
A sahi T / U B all C heck V alves
PVC (EPDM, Soc/Thd)CPVC (EPDM, Soc/Thd)
Part
SizePart
Size
Number
(in.) Number
(in.)
425-16-101
1/2
425-16-201
1/2
425-16-102
3/4
425-16-202
3/4
425-16-103
1
425-16-203
1
425-16-104
1-1/2
425-16-204
1-1/2
425-16-105
2
H aywar d - B all Che ck Valv e
Features/ Benefits
•Full port, safe block design
•Line pressure unseats the solid plastic ball to open valve.
•Available in PVC with Viton® seals.
•Choice of threaded ends only.
•Available sizes are not True Union.
H ayward B all C heck V alves
PVC (Viton®, Thd)
Part
Size
Number
(in.)
425-17-101
1/4
425-17-102
3/8
Note: Non-union, threaded ball check valve not pictured
Need a Level Switch?
See page: 164
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
77
Diaphragm Check Valves
Plast - o - M ati c - CK M S eries
®
Valves
Features and Benefits
•Patented design; self sealing - not dependent upon gravity, mounting position or
reverse flow, a significant improvement over ball check valves.
•Silent operation; no internal sliding or loose parts to slam or vibrate - chattering is
eliminated.
•Dependable; leak-free sealing protects against the potential hazards created by
reverse flow of corrosive liquids such as acids, caustics and chlorine solutions.
•Convenience; single union design with minimum piping breakdown.
•Repetitive long-term sealing; diaphragm automatically positions itself against seat
in the identical location. Superior to ball check valves which often leak at lower
pressures.
•Sizes available from 1/2” to 1”.
•CKM Series only available with threaded ends.
•Minimal cracking pressure - diaphragm begins to open at less than 1-1/2 psi.
D iaphragm C heck V alves
PVC (Viton®, Thd)PP (Viton®, Thd)
PartSizePartSize
Number(in.)
Number(in.)
425-19-101
1/2
425-19-301
1/2
425-19-102
3/4
425-19-302
3/4
425-19-1031
425-19-3031
REPLACEMENT DIAPHRAGM KIT
Part
Number
product
description
425-19-033
Molded Diaphram, Viton®, 1/2” CKM
425-19-035
Molded Diaphram, Viton®, 3/4” & 1” CKM
Self-Closing Check Valves
Plast - o - mati c - CK S S eries
®
Features and Benefits
•Sizes available from 1-1/2” to 2”.
•Rugged thermoplastic construction meets highest industry standards.
•Normally closed designed, self-sealing, not dependent upon gravity, mounting position or
gravity.
•Leak-free sealing.
•PFA encapsulated SS spring provides bubble tight seal mounted in any position.
•Rapid closure by spring-loaded poppet helps to eliminate sudden backflow water hammer.
•Positive repetitive sealing - poppet automatically positions itself against seat in the identical
location each time for long cycle life dependability.
•Convenience - union nuts simplify valve installation, inspection and removal.
•Minimal cracking pressure - valve begins to open at approximately 1.0 to 1.5 psi.
•CKS Series only available with threaded ends.
S elf - C losing C heck V alves
PVC (Viton®, Thd)
Part
Number
78
Size
(in.)
425-20-107
1-1/2
425-20-108
2
800-633-3080 / www.mcpur.com / Mar Cor Purification
Diaphragm Valves
A sahi - T yp e 72
Valves
Features and Benefits
•Sizes available from 1/2” to 2”.
•Pipe connections in socket configurations are to IPS dimensions.
•End connectors are true union design.
•Position indicator and adjustable travel stop to prevent over
tightening.
•Bonnet seal protects internals from corrosive environments.
•Valve design allows for excellent throttle capabilities.
•Body material available in PVC and CPVC (PP and PVDF are also
available).
•Asahi diaphragm valves are also available with flanged ends.
A S A H I T / U D iaphragm V alves
PVC (EPDM diaphragm, Soc)CPVC (EPDM diaphragm, Soc)
Part SizePart
Size
Number (in.) Number (in.)
425-18-101
1/2
425-18-201
1/2
425-18-102
3/4
425-18-202
3/4
425-18-103 1 425-18-203
425-18-104
1-1/2
425-18-204
1
1-1/2
425-18-105 2 425-18-205
Note: T/U Diaphragm Valve not pictured.
2
Flow Control Valves
Plast -o-M ati c - S eries F C
®
Features and Benefits
•Maintain constant flow with inlet pressure changes from
15 to 120 psi.
•For corrosive and ultrapure liquid applications.
•No metal in conduct with the liquid.
•Standard flow ranges from 0.25 GPM to 120 GPM.
•Automatic in operation - no adjustments.
•Materials are made of PVC with Buna-N diaphragms.
• Bodies are also available in virgin PP and PVDF as special order.
•Temperature range for PVC valves 40°F - 140°F.
•Maximum pressure range is 120 psi at 75°F.
•Pipe sizes available: 1/2”- 1”.
•Other flow rates (gpm) are available. Call for details.
Note: In-line strainer/filter should be installed prior if suspended solids
are suspected.
Products are non-returnable.
F low C ontrol V alves
PVC (Buna-N, Thd)
Part
Size
Number
(in.)
425-27-113
425-27-114
425-27-116
425-27-117
425-27-118
425-27-119
425-27-121
425-27-126
425-27-131
1/2
1/2
1/2
1/2
1/2
3/4
3/4
1
1
Flow Rates
(gpm)
0.25
0.5
1.0
1.5
2.0
3.0
5.0
10.0
15.0
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
79
Pressure Relief Valves
Plast - o - M ati c - S eries RV T
®
Valves
Features and Benefits
•Sizes available from 1/2” to 2”.
•Angle patterned design with female pipe threads.
•Utilizes non-sticking design with PTFE shaft.
•Patented Fail-Dry® design provides vent between upper and center U-cup seals; if lower two seals fail, fluid will
weep through vent to indicate maintenance is required while the third seal continues to protect the control
spring.
•Provides simple adjustment with bolt and locking nut.
•Materials available are PVC and Nat. PP, (PFA and PVDF are also available).
•Protects systems/equipment from dangerous overpressures.
•Maintains back-pressure in piping systems.
•Set pressures from 5 to 100 psi.
P ressure R elief V alves
®
PVC (Viton seals, Thd)PP (Viton® seals, Thd)
Part
SizePart
Size
Number
(in.)
Number
(in.)
RELIEF VALVE KITs
425-22-107
1/2
-
1/2
PartProduct
Number
description
1229062
3/4
425-22-302
3/4
425-22-040
Seal Kit, 1/2” RVT, Viton®
1
425-22-041
Seal Kit, 3/4” RVT, Viton®
1-1/4
3013924
Seal Kit, 1” RVT, Viton®
1229901
425-22-110
1
425-22-303
1-1/4
-
S prayin g S ystems - 23120-PP & 8 460
Features and Benefits - 23120-PP
•Black Polypropylene with SS spring.
•Excellent chemical resistance.
•Model 23120 has EPDM O-ring and 302-SS spring.
•Choice of 1/2” or 3/4” NPT (M) inlet and (F) outlet.
•For pressures to 150 psi.
•1/4” FNPT for pressure gauge.
Features and Benefits - 8460
model 8460
•All wetted parts are made of plastic
with aluminum housing.
•Excellent chemical resistance.
•Features a Fairprene® diaphragm seal.
•Provides responsive chatter-free operation.
•Choice of 1/2” or 3/4” NPT (M) inlet and (F) outlet.
•For pressures to 300 psi.
Solenoid Valves
I n - Line Solenoid Valv e
Features and Benefits
•Offered with 3/4” FNPT connections.
(Photo shows the valve with union connections).
•Balanced pressure design for dependable operation.
•Operates automatically or manually.
•Energy efficient, encapsulated 24 VAC.
•Heavy duty plastic body with SS screws for durability.
E conomical S olenoid V alve
80
PartPipe Size
Number
(in.)Voltage
Hz
ME41164
60
3/4
24 VAC
800-633-3080 / www.mcpur.com / Mar Cor Purification
S praying S ystem
P ressure R elief V alves
Part
Number
Model Number
Size
(in.)
425-23-401
23120
1/2
425-23-402
23120
3/4
ME40086
8460
1/2
425-23-411
8460
3/4
Solenoid Valves
A S CO - S eries 8210, 2- W ay
®
Valves
Features and Benefits
•Sizes available from 3/8” to 1”.
•2-Way Pilot Operated.
•Standard Red-Hat II® - Type 1, 2, 3, 3S, 4 and 4X combination general
purpose and watertight enclosure.
•Coil - continuous duty molded Class F.
•Vast assortment of standard electrical voltages.
•Body Materials - Brass or SS threaded (FNPT).
•CSA certified.
•Seals and discs are Buna-N.
•Valves are Normally Closed (NC) orNormally Opened (NO).
A S C O S olenoid V alves
Normally Closed (closed when de-energized)
Min. Oper. Max. Oper.
Max.
Part
Pipe SizeOrfice Size
Model
FlowDif. (psi)Dif. (psi)
Fluid
Body
Number
(in.)
(in.)
Number
Rate Cv Water Water Temp.Voltage HzMaterial
425-26-501
3/8
3/8
8210G73
1.5
1
125
180
120 VAC
60
Brass
425-26-502
3/8
3/8
8210G73
1.5
1
40
150
24 VDC
60
Brass
425-26-602
3/8
3/8
8210G36
1.5
1
125
180
120 VAC
60
SS
1/2
7/16
8210G15
2.2
1
40
150
24 VDC
60
Brass
425-26-504
425-26-532
1/2
7/16
8210G15
2.2
1
125
180
24 VAC
60
Brass
425-26-505
1/2
5/8
8210G94
4
0
150
180
120 VAC
60
Brass
Brass
425-26-507
3/4
3/4
8210G9
5
5
125
180
120 VAC
60
425-26-508
3/4
3/4
8210G9
5
5
90
150
24 VDC
60
Brass
425-26-509
3/4
3/4
8210G95
5
0
150
180
120 VAC
60
Brass
425-26-510
3/4
3/4
8210G9
5
0
40
150
24 VDC
60
Brass
425-26-512
3/4
3/4
8210G3
6.5
5
125
150
24 VDC
60
Brass
425-26-513
1
1
8210G4
13
5
150
180
120 VAC
60
Brass
425-26-514
1
1
8210G4
13
5
125
150
24 VDC
60
Brass
425-26-558
1 1/2
1 1/4
8210G22
22.5
5
125
150
24 VDC
60
Brass
A S C O S olenoid V alves
Normally OPEN (OPEN when de-energized)
Min. Oper. Max. Oper.
Max.
Part
Pipe SizeOrfice Size
Model
FlowDif. (psi)Dif. (psi)
Fluid
Body
Number
(in.)
(in.)
Number
Rate Cv Water Water Temp.Voltage HzMaterial
425-26-523
3/4
3/4
8210G35
5.5
0
150
180
120 VAC
60
Brass
425-26-524
3/4
3/4
8210G35
5.5
0
125
150
24 VDC
60
Brass
A S CO ® - S eries 8262, 2- W ay
Features and Benefits
•Sizes available from 1/8” to 3/8”.
•2-Way Direct Acting, General Service.
•Standard Red-Hat II® - Type 1, 2, 3, 3S, 4 and 4X combination general
purpose and watertight enclosure.
•Coil - continuous duty molded Class F.
•Vast assortment of standard electrical voltages.
•Body Materials - Brass or SS threaded (FNPT).
•CSA certified.
A S C O S olenoid V alves
Normally Closed (closed when de-energized)
Max. Oper.
Max.
Part
Pipe SizeOrfice Size
Model
FlowDif. (psi)
Fluid
Body
Number
(in.)
(in.)
Number
Rate Cv WaterTemp.Voltage Hz Material
425-26-650
1/4
3/32
8262G86
.17
340
180
120 VAC
60
SS
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
81
Electric Ball Valves
B an j o Valv es
®
Features and Benefits
Valves
•316 stainless steel ball and stem.
•Corrosion resistant fiberglass reinforced polypropylene.
•Glass reinforced PTFE seats.
•All FKM (Viton® type) body o-rings.
•Open/Closed Indicator.
•Flange clamp for easy motor/valve separation.
•All metal gears.
•Motor housing is doubled sealed with EPDM.
•Weep hole between valve and actuator.
•3-way valve is bottom load. Directional flow is left or right. Valve cannot be turned off.
Specifications
•24-Volt DC
•150 PSI maximum pressure
•4” lead with 5 conductor wire (OEM installed). Designed for junction box. Junction box with parts sold separately. Call for details.
2-Way Valve
B anjo V alves
PartProduct
NumberDescription
425-13-323
Size
(In.)
2-way ball valve
425-13-393
3-way ball valve
Response Time
(Sec.)
1” FNPT
.75 — 1.25
1” FNPT with 1” Bottom Flange
1.5
3-Way Valve
Note: Photo images differ slightly as compared to the part numbers.
C onnections
PartProduct
NumberDescription
seal
1” Flange x fnpt
adapter
clamp
425-13-070
1” Flange x MNPT adapter
425-13-071
1” Flange x FNPT adapter
425-13-072
1” Flange x Flange 90 Elbow adapter
425-13-073
Seal gasket, adapter
425-13-074
Clamp, adapter attachment
425-13-081
Mounting bracket, angle, 1.5”
1” Flange x mnpt
adapter
Need to Measure Flow?
See Process Controls on page
150-151 for flow meters.
82
800-633-3080 / www.mcpur.com / Mar Cor Purification
Laboratory Faucets
H i g h - Pu rity Labo ratory F aucets
Features and Benefits
Valves
•Ideal system for delivery of deionized or distilled water or other liquids
where a high degree of purity is required.
•Meets FDA, USDA, and USP Standards.
•Extra smooth walls prevent collection and breeding of fungi, bacteria
and other biological impurities.
•Excellent chemical resistance and non-porous surfaces.
•Able to withstand high temperatures 46-176°F.
•Deck or wall mountable.
•No Elastomers (O-Rings), Metals or Lubricants, Corrosion, or
Contamination.
•Improved needle valve sealing; low torque on/off operation; full flow at
1 full turn.
•Standard 3/8” NPT fittings offer easy inlet installation.
•Precise dispensing using needle valve; crevice free with zero dead leg.
•Max flow of 2.4 GPM and 80 PSI.
•Removable barbed tip, 1/4” thread.
•Operating pressure range: 15-150 PSI.
•Right handed configuration.
•Profax natural PP material: Listed under NSF 14/61.
H igh P urity L ab F aucets
Part
Number
MaterialConfiguration
3028133
Polypropylene
Deck Mount
3028134
Polypropylene
Wall Mount
(PP Deck Mount)
Barbed Tip Not Shown
PVC L ab oratory F au cets
Features and Benefits
•Ideal system for delivery of deionized or distilled water applications.
•Constructed of PVC Material. Listed under NSF Standard 14/61.
•FDA, USDA, and USP Standards are either met and/or exceeded.
•No Elastomers (O-Rings), Metals or Lubricants, Corrosion, or Contamination.
•Beautifully finished to enhance all installations.
•All injection molded, rugged design and construction.
•Deck or wall mountable.
•Standard 3/8” female NPT inlet connection.
•Improved needle valve sealing; low torque on/off operation; full flow at 1 full turn.
•Outlet barb fitting connects to different size tubing. Barb tip is removable, 1/4” thread.
•Precise dispensing using needle valve; crevice free with zero dead leg.
•Max flow of 2.4 GPM at 80 PSI.
•Operating pressure range: 15-200 PSI.
P V C L a b F a uc e ts
Part
Number
MATERIALConFIGURATION
3028131
PVC
Deck Mount
3028132
PVC
Wall Mount
(PVC Deck Mount)
w/ Barbed Tip
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
83
Thermostatic Water Mixing Valves
P o wers - H y dr ogu ar d XP S eries MM430
®
TM
The Hydroguard thermostatically blends hot and cold water to deliver mixed water at the
desired temperature, compensates for both temperature and pressure changes in the
supply lines, and reduces flow upon water supply failure.
Features and Benefits
Valves
•Heavy duty rough bronze bodies.
•Combination strainer/check stops to
prevent backflow.
•Valve compensates for supply line
temperature and pressure changes.
•Tamper resistant control lets you adjust
temperature.
•Union inlets simplify installation and
maintenance.
•Maximum Inlet temperature range
is 200°F.
•Series MM430 - Low temperature range
- 60°F to 90°F.
•Connections are FNPT.
Caution: Valves should not be used where anti-scald temperature controls are required.
T empering V alves
PartPipe size Pipe size
Max. Inlet
Number
Both inlet (in.)Center (in.)Pressure (psi)
Flow Rate*
(gpm)
Mounting
Inlet C to C
8-3/16”
3024409
3/4
3/4
125
20
3024412
3/4
1
125
30
8-3/16”
3024410
1 1/4
11/4
125
52
10-1/4”
3024411
1 1/4
11/2
125
68
10-1/4”
*Flow rates are based at 10 psi pressure drop across the valve.
Note: Mounting dimensions are approximate.
REPLACEMENT PARTS
Part
Number
description
425-30-711
431 Motor Replacement Kit
425-30-712
431/432 Strainer
425-30-713
431/432 Check Stop
425-30-714
431 Gasket and Disc
425-30-721
432 Motor Replacement Kit
425-30-724
432 Gasket and Disc
Float Valves
E c o n omy F l oat Valv e
Features and Benefits
•Saves valuable tank space. Dimensions 3-3/4” x 5”.
•No level arm to break. No float ball stem to break.
•Used in rinse tanks or maintaining water level in open tanks.
•Easy installation.
•Molded of fiberglass reinforced Nylon and ABS plastic.
F lo a t V a lv e s
Part
Number
425-31-901
Size
Max.
Max.
(in.)
Temp. (ºf)Press. (psi)
1” FNPT
90
Mar Cor offers additional types of float control devices. See our Process Control section for different features and options.
MEC H AN I CA L F loat Valv e
Features and Benefits
•Accurate & repeatable level control.
•On-Off non-modulating action.
•Fully adjustable high & low level settings.
•Simple design, proven reliability.
•Easy installation and maintenance.
84
800-633-3080 / www.mcpur.com / Mar Cor Purification
0-125
MECHANICAL FLOAT VALVE
Part
Number
description
425-36-115
CLA-VAL, 124-01, 1” FPT
pumps
Pumps
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
85
TonkaFlo Pumps Centrifugal
®
SS - series
Applications
•Spray
•Reverse Osmosis Feed
•Caustics
•Acids
•DI Water
•Chemical Transfer
Features and Benefits
Pumps
•Corrosion-Resistant Construction - Noryl diffusers and impellers,
316 stainless steel pump case and shaft
•Modular Liquid End - permits design flexibility when
positioning piping
•Wide Selection - SS Series pump to fit any pressure or flow
•Separate Bearing Frame - eliminates thrust load on the
motor; powered by standard motors
•Industry Standard Mechanical Seal - higher boost pressure
capability and longer seal life
•High Pressure Reverse Osmosis - K-Bearing frame eliminates
alignment problems
Specifications
Motor Type Options ODP - Open Drip Proof
TEFC - Totally Enclosed Fan Cooled
Capacity - 1.4 to 300 gpm (5.3 to 1136 Lpm)
Pressures - up to 700 psid (48.3 bar)
Maximum Operating Temperature Standard - 125°F (52°C)
Optional - 165°F (74°C) Glass-Filled Noryl (GFN)
Piping Requirements
Connections
Series
Flow Ranges
SS1800 5-22 gpm
InletDischarge
1-1/4 inch Victaulic 1-1/4 inch Victualic
SS 1800 SERIES PUMPS - 60 Hz 3450 RPM
Part Model Number
Number
Nominal
Flow
HeadPump
(gpm)
(psid)Coupling
HPVoltsPhase
Motor
Type
Ship
Wt (lb)
025-11-001
SS1804X
15
45
Direct
0.75
110/220
1
ODP
55
025-11-002
SS1804X
15
45
Direct
0.75
230/460
3
ODP
50
025-11-005
SS1806X
15
70
Direct
1.0
110/220
1
ODP
57
025-11-006
SS1806X
15
70
Direct
1.0
230/460
3
ODP
51
025-11-009
SS1808X
15
95
Direct
1.5
110/220
1
ODP
58
025-11-010
SS1808X
15
95
Direct
1.5
230/460
3
ODP
52
025-11-013
SS1809X
15
105
Direct
1.5
110/220
1
ODP
58
025-11-014
SS1809X
15
105
Direct
1.5
230/460
3
ODP
53
025-11-017
SS1816X
15
180
Direct
3.0
110/220
1
ODP
77
025-11-018
SS1816X
15
180
Direct
3.0
230/460
3
ODP
71
Note: 50Hz and special application pumps are available from the manufacturer. Lead-time is 6-8 weeks. TEFC Motor types are available.
A c c ess ories
The following accessories are designed to fit the AS,
SS and QS Series TONKAFLO® pumps. TONKAFLO®
pumps accessories include items which aid in or adapt
to installation requirements. Options are additions or
modifications to the pump to meet specific application
requirements. Additional accessories and options
are available. Please contact Mar Cor Purification for
additional information.
86
A ccessories
Part Part
NumberDescription
OS1120264
Discharge screen, 1.25-inch Victaulic screen
OS1157370
Victaulic Clamps, 1.25-inch clamp, style 77, up to 1,000 psig
025-40-043
Rubber Gasket, EPDM, for 1.25-inch vic clamp
025-40-007
Adapters, 1.25 Victaulic x 0.7-inch F-NPT, 316SS
025-40-008
Adapters, 1.25 Victaulic x 1.0-inch F-NPT, 316SS
025-40-009
Adapters, 1.25 Victaulic x 1.25-inch F-NPT, 316SS
025-40-014
Lubricants, Grease No.2 Lithium (14.5 oz. Tube)
800-633-3080 / www.mcpur.com / Mar Cor Purification
Grundfos Pumps Centrifugal
®
C R N - C RNE S eries
The CRN is a vertical multistage centrifugal pump. The in-line design enables the pump to
be installed in a horizontal one-pipe system where the suction and discharge ports are in
the same horizontal plane and have the same pipe dimensions. CRN pumps are suitable
for a variety of applications from pumping of potable water to pumping of chemicals.
Applications
•Water treatment systems
•Reverse osmosis systems
•Washing and cleaning systems (boosting)
•Process water system (boosting)
•Machine cooling (transfer)
•Softening and ion exchange systems
Features and Benefits
Flow Range: 0.5 to 630 gpm
Head Range: 0 to 995 ft
Operating Pressure: max. 232 psi
Note: Varies depending on the model.
Liquid Temperature: -4º F to +248º F
(-20º C to +120º C)
Motor Type: TEFC (Totally Enclosed Fan
Cooled)
pumps
•Corrosion-resistant (316 stainless steel)
pumped liquid parts
•Reliability
•High efficiency
•Service-friendly
•Space-saving
•Suitable for slightly aggressive liquids
Specifications
CRN SERIES PUMPS - 60 HZ
PART
NUMBER
MODEL
NUMBER
NOMINAL
FLOW
(GPM)
HEAD
(PSI)
HP
VOLTS
PHASE
PIPING
SUCTION
PORT
DISCHARGE
PORT
SHIP
WT (LBS.)
1240464
1242764
3024945
1238876
1242762
1266165
CRN 3-6
CRN 3-8
CRN 3-9
CRN 3-6
CRN 3-8
CRN 5-9
15
15
15
15
15
30
60
80
90
60
80
90
1.0
1.5
1.5
1.0
1.5
3.0
115/230
115/230
115/230
208-230/460
208-230/460
208-230/460
1
1
1
3
3
3
1-1/4" NPT
1-1/4" NPT
1-1/4" FLG
1-1/4" FLG
1-1/4" FLG
1-1/4" FLG
1-1/4" NPT
1-1/4" NPT
1-1/4" FLG
1-1/4" FLG
1-1/4" FLG
1-1/4" FLG
86
91
92
65
68
110
PART
NUMBER
MODEL
NUMBER
NOMINAL
FLOW
(GPM)
HEAD
(PSI)
HP
VOLTS
PHASE
PIPING
SUCTION
PORT
DISCHARGE
PORT
SHIP
WT (LBS.)
3027137
3026515
3027113
3024769
CRNE 3-6
CRNE 3-8
CRNE 3-12
CRNE 5-9
15
15
15
30
60
80
120
90
1.5
1.5
2.0
3.0
208-230
208-230
208-230
208-230
1
1
3
3
1-1/4" FLG
1-1/4" FLG
1-1/4" FLG
1-1/4" FLG
1-1/4" FLG
1-1/4" FLG
1-1/4" FLG
1-1/4" FLG
75
75
109
103
CRNE SERIES PUMPS - 60 HZ, VFD MODELS
C R N E - P L U S S E R I E S P U M P S - 6 0 H Z , V F D M O D E L S W I T H B L A D D E R TA N K
PART
NUMBER
MODEL
NUMBER
NOMINAL
FLOW (GPM)
HEAD
(PSI)
HP
VOLTS
PHASE
PIPING
SUCTION PORT
DISCHARGE
PORT
SHIP
WT (LBS.)
1238737
1238743
3025675
3028123
CRNE 3-9 Plus
CRNE 5-5 Plus
CRNE 5-5 Plus
CRNE 5-8 Plus
15
30
30
30
90
50
50
80
1.5
1.5
1.5
3.0
208-230
208-230
208-230
208-230
1
1
3
3
1-1/4" NPT
1-1/4" NPT
1-1/4" NPT
1-1/4" NPT
1-1/4" NPT
1-1/4" NPT
1-1/4" NPT
1-1/4" NPT
215
215
215
245
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
87
March Pumps Magnetic Drive
Series M DX - Fl ows to 8. 4 GPM
Applications
•Coffee Dispensers
•Aquariums
•Biomedical Applications
•Dryers
•Icemakers
•Electrostatic Painting
•Photographic Processing
•Vending Equipment
MDXT & MDXT-3 Pumps
Features and Benefits
•Materials in contact with solution - Glass
filled PP, Kynar, Ryton, Buna-N, Ceramic
magnet
•Maximum Pressure - 50 psi
•Maximum Liquid Temp - 190°F
•Complete with 3 ft. SJT Cord
MDX-MT3 & MDK Pumps
Pumps
Features and Benefits
•Materials in contact with solution Ryton, Ceramic, Viton®, Kynar(MDK)
•Maximum Pressure - 75psi
•Maximum Liquid Temp - 200°F
•Complete with 3 ft. SJT Cord
•TEFC models have conduit box only
M a rch P umps
Seal-less Magnetic Drive Pumps - Series MDX
Part ModelMax.
Max. Head
Motor
Number
Number
(gpm)
(FT)
InletOutlet HP RPMVoltsPH Hz Type
028-01-001
MDXT
6
7
1/2” FPT
3/8” FPT 1/50
1700
115
1
60
AC
028-01-002
MDXT-3
6
7
1/2” FPT
3/8” FPT 1/25
3410
115
1
50/60
AC
028-01-003
MDX-MT3
7.6
19
1/2” MPT 1/2” MPT 1/25
3400
115
1
50/60
AC
028-01-004
TE-MDX-MT3
8.4
17
1/2” MPT 1/2” MPT 1/15
3600
115/230
1
50/60
TEFC
028-01-005
TE-MDK-MT3
8.4
17
1/2” MPT 1/2” MPT 1/15
3450
115/230
1
50/60
TEFC
Series 5 & 6 - F lows to 38 GPM
Applications
•Computer Cooling
•Carbon Arc Furnace Cooling
•Detergent Mixers
•Film Processors
•Refrigerators
•Chemical Processes
AC-5C-MD Pumps
Features and Benefits
•Materials in contact with solution - PP,
Ceramic, Buna-N, Ceramic magnet
•Maximum Pressure - 50 psi
•Maximum Liquid Temp - 190°F
•Complete with 3 ft. SJT Cord
TE-5C-MD Pumps
Features and Benefits
•Materials in conta ct with solution PP, Ceramic, Viton®
•Maximum Pressure - 50 psi
•Maximum Liquid Temp - 190°F
•Conduit box for electrical connection
TE-5K-MD Pumps
Features and Benefits
•Materials in contact with solution - Carbon/
Kynar, Ceramic, Viton®
•Maximum Pressure - 75 psi
•Maximum Liquid Temp - 200°F
•Conduit box for electrical connection
TE-6T-MD Pumps
Features and Benefits
•Materials in contact with solution glass filled polypropylene and Ryton®,
Ceramic, Viton®, FEP/Ryton® bushing
•Maximum Pressure - 50 psi
•Maximum Temperature - 190°F
•Conduit box for electrical connection
M a rch P umps
Seal-less Magnetic Drive Pumps - Series 5 & 6
Part ModelMax.
Max. Head
Motor
Number
Number
(gpm)
(FT)
InletOutlet HP RPMVoltsPH Hz Type
88
028-05-001
AC-5C-MD
17
27
1” FPT
1/2” MPT
1/8
3200
115
1
50/60
AC
028-05-002
TE-5C-MD
18
29
1” FPT
1/2” MPT
1/5
3450
115/230
1
50/60
TEFC
028-05-003
TE-5K-MD
18
29
1” FPT
1/2” MPT
1/5
3450
115/230
1
50/60
TEFC
028-06-002
TE-6T-MD
38
49
1” FPT
3/4” MPT
1/2
3450
115/230
1
50/60
TEFC
3008754
TE-5.5C-MD
30
41
1” FTP
3/4” MPT
1/3
3450
115/230
1
50/60
TEFC
800-633-3080 / www.mcpur.com / Mar Cor Purification
March Pumps Magnetic Drive
Series 7 - F lows to 53 GP M
Applications
•Chemical Processes •Manufacturing Plants • Industrial Applications
•Water Treatment Equipment
• Caustic Chemical Transfer
TE-7R-MD Pump
TE-7S-MD Pump
Features and Benefits
•Materials in contact with solution Glass filled PP, Ryton, Ceramic, Viton®,
PTFE/Ryton bushing
•Maximum Pressure - 50 psi
•Maximum Liquid Temp - 190°F
Features and Benefits
•Materials in contact with solution 316 Stainless Steel, Ceramic, Viton®,
Carbon bushing
•Maximum Pressure - 200 psi
•Maximum Liquid Temp - 250°F
TE-7K-MD Pump
TE-7H-MD Pump
Features and Benefits
•Materials in contact with solution Hastelloy “C” Ceramic Viton®, Carbon
Bushing
•Maximum Pressure - 200 psi
•Maximum Liquid Temp - 250°F
pumps
Features and Benefits
•Materials in contact with solution Carbon filled Kynar, Ceramic, Viton®,
Carbon bushing
•Maximum Pressure - 75 psi
•Maximum Liquid Temp - 200°F
Note: TEFC models have conduit box for
electrical connection.
M a rch P umps
Seal-less Magnetic Drive Pumps - Series 7
Part ModelMax.
Max. Head
Motor
Number
Number
(gpm)
(FT)
InletOutlet HP RPMVoltsPH Hz Type
028-07-001
TE-7R-MD
53
60
1 1/2” FPT
1” MPT
3/4
3450
115/230
1
50/60
TEFC
028-07-002
TE-7K-MD
53
60
1 1/2” FPT
1” MPT
3/4
3450
115/230
1
50/60
TEFC
028-07-003
TE-7S-MD
53
60
1 1/2” FPT
1” MPT
3/4
3450
115/230
1
50/60
TEFC
M A R C H P umps - P A R T S
Part
Number
description
028-83-172
Wet End Kit, TE-5C-MD
20
028-83-174
Wet End Kit, TE-6T-MD
19
028-83-176
Wet End Kit, TE-7R-MD
MDX-3
MDXT-3
18
17
15
30
14
28
13
26
12
AC-5C-MD
TE-5C-MD
24
TE-MDX-MT3
11
22
MDX MT3
20
60
9
18
55
8
16
50
7
6
5
5C-MD
LC-5C-MD
12
10
MDX
MDXT
4
8
35
30
25
3
6
20
2
4
15
1
2
10
0
0
0
1
2
3
4
5
6
G.P.M.
SERIES MDX
7
8
9
TE-7R-MD
45
14
HEAD IN FEET
10
HEAD IN FEET
HEAD IN FEET
16
0
0
2
4
6
8
10
G.P.M.
12
SERIES 5
14
16
18
0
5
10
15
20
25 30
G.P.M.
35
40
50 55
SERIES 7
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
89
Little Giant Pumps Magnetic Drive
M D - S eries
Features and Benefits
• Designed for mildly corrosive solutions and chemicals.
• Leakproof, sealless magnetic drives.
• Ideal for in-line, non-submersed use.
• All pumps come complete with 6 ft power cord, 3-prong plug.
• Glass-filled polypropylene impeller assembly.
• Standard nitrile O-ring.
• Fluid temperature up to 150°F.
• Fluid specific gravity up to 1.1.
• Pump heads are easily rotated, cleaned or serviced with no
special tools.
• Thrust washers and shaft are constructed of Titanium.
Pumps
L ittle G iant P umps M D - S eries
Magnetic Drive Mildly-Corrosive
Max. HEAD
(ft)
InletDischarge
HPVolts
HzPhase
Model
Number
Max.
(gpm)
027-03-001
2-MD
8.3
14.6
1/2” FPT
1/2” MPT
1/30
115
60
027-03-002
3-MD
9.5
16.5
1/2” FPT
1/2” MPT
1/20
115
027-03-003
4-MD
11.5
23.7
1/2” FPT
1/2” MPT
1/12
115
027-03-004
5-MD
15.1
35
1/2” FPT
1/2” MPT
1/8
115
Part
Number
Motor
Type
Ship
Wt. (lb)
1
Open
6
60
1
Open
8
60
1
Open
9
60
1
Open
9
MD - S C S eries
Features and Benefits
• Designed for semi-corrosive solutions and chemicals.
• Leakproof, sealless magnetic drives.
• Ideal for in-line, non-submersed use.
• Glass-filled polypropylene fluid contact.
• 99.5% pure alumina ceramic shafts and thrust washers.
• Motor types are either Open or totally enclosed fan-cooled (TEFC).
• Standard nitrile O-ring.
• Fluid temperature up to 150°F.
• Fluid specific gravity up to 1.1.
• Pump heads are easily rotated, cleaned or serviced with no
special tools.
L ittle G iant P umps M D - S C S eries
Part
Number
Model
Number
Magnetic Drive Semi-Corrosive
Max. Max. HEAD
(gpm)
(ft)
InletDischarge
HPVolts
HzPhase
Ship
Wt. (lb)
027-02-006
TE-4-MD-SC
14
24.3
1” FPT
1/2” MPT
1/10
115
50/60
1
TEFC
10
027-02-008
TE-5-MD-SC
20
29.5
1” FPT
1/2” MPT
1/8
115
50/60
1
TEFC
19
42
1” FPT
3/4” MPT
1/3
115/230 50/60
1
TEFC
28
027-02-009 TE-5.5-MD-SC 32
90
Motor
Type
027-02-010
TE-6-MD-SC
38
50
1” FPT
3/4” MPT
1/2
115/230 50/60
1
TEFC
29
027-02-011
TE-7-MD-SC
53
58.9
1 1/2” FPT
1” MPT
3/4
115/230 50/60
1
TEFC
40
800-633-3080 / www.mcpur.com / Mar Cor Purification
Little Giant Pumps Magnetic Drive
MD - H C Series
Features and Benefits
• Designed for highly-corrosive solutions and chemicals.
• Leakproof, sealless magnetic drives. Ideal for in-line, non-submersed use.
• Glass-filled Ryton pumping head combines impeller with Ryton encapsulated drive
magnet.
• 99.5% pure alumina ceramic shafts and thrust washers.
• Motor types are either Open or totally enclosed fan-cooled (TEFC).
• Drive and impeller magnets are permanent ceramic material.
• Can run dry up to 8 hours.
• Self-lubricating carbon impeller bushings.
• Standard Viton® O-rings.
• Fluid temperature up to 180°F (some rated at 200°F).
• Pump heads are easily rotated, cleaned or serviced with no special tools.
pumps
L ittle G iant P umps M D - H C S eries
Part
Number
Model
Number
Magnetic Drive Highly Corrosive
Max. Max. head
(gpm)
(ft)
InletDischarge
HPVolts
HzPhase
Motor
Type
Ship
Wt. (lb)
027-01-004
TE-3MD-HC
10
16.3
1/2” FPT
1/2” MPT 1/25
115
60
1
TEFC
9
027-01-006
TE-4-MD-HC
14
24.3
1” FPT
1/2” MPT 1/10
115
60
1
TEFC
10
027-01-008
TE-5-MD-HC
20
29.5
1” FPT
1/2” MPT
1/8
115
50/60
1
TEFC
19
027-01-009 TE-5.5-MD-HC
32
42
1” FPT
3/4” MPT
1/3
115/230 50/60
1
TEFC
28
027-01-010
TE-6-MD-HC
38
50
1” FPT
3/4” MPT
1/2
115/230 50/60
1
TEFC
29
027-01-011
TE-7-MD-HC
53
58.9
1 1/2” FPT
1” MPT
3/4
115/230 50/60
1
TEFC
40
L ittle G iant P umps - P A R T S
Part
Number
description
SHIP
WT. (LB)
027-83-141
5-MD-HC-Pump Head, Less Motor
3
027-83-143
6-MD-HC-Pump Head, Less Motor
7
027-83-145
7-MD-HC-Pump Head, Less Motor
8
M D - CK S eries
Features and Benefits
• Designed for highly-corrosive solutions and chemicals.
• Leakproof, sealless magnetic drives.
• Glass-filled Ryton pumping head combines impeller with Ryton encapsulated
drive magnet.
• 99.5% pure alumina ceramic shafts and thrust washers.
• Motor types are totally enclosed fan-cooled (TEFC).
• Drive and impeller magnets are permanent ceramic material.
• Can run dry up to 8 hours (except TE-7MD-CK model).
• Self-lubricating carbon impeller bushings.
• Standard Viton® O-rings.
• Features all-molded Kynar construction.
L ittle G iant P umps M D - C K S eries
Magnetic Drive Highly Corrosive
Part
Model
Max. Max. head
Number
Number
(gpm)
(ft)
InletDischarge
HPVolts
027-04-001 TE-5.5-MD-CK*
32
42
1” FPT
3/4” MPT
1/3 115/230 50/60
027-04-002
TE-6-MD-CK
53
49
1” MPT
3/4” MPT
1/2 115/230 50/60
027-04-003
TE-7-MD-CK
53
58.9
1 1/2” FPT
1” MPT
3/4 115/230 50/60
Motor
Type
Ship
Wt. (lb)
1
TEFC
28
1
TEFC
30
1
TEFC
40
HzPhase
*Mica filled bushing.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
91
Iwaki Walchem Pumps Magnetic Drive
WM D/M D Series
Features and Benefits
•Unique internal cooling circuit extends bearing life.
•Precision machined impeller/capsule substantially reduces hydraulic
noise.
•Dynamically balanced barium ferrite drive magnets provides excellent
magnet torque.
•Premium, high efficiency motors are used exclusively.
•Polypropylene wetted connections.
•All single phase, 50/60 Hz operation.
Please contact us for additional pump sizes. Other voltages and
enclosures are also available for some models.
Pumps
IWAKI WALCHEM
Magnetic Drive Pumps - WMD/WD Series
Part Model
Max.
Max. Head
Motor
Number
Number
(gpm)
(FT)
InletOutlet HP
RPMVoltsPH
Hz
Type
029-01-001
MD-6
2.3
4.5
1/2” HB
1/2” HB
1/250
3100
115
1
50/60
SP
029-01-003
WMD-15R(T)
5.0
11.1
1/2” MPT
1/2” MPT
1/75
3100
115
1
50/60
ODP
029-01-004
WMD-20R(T)
8.2
14.1
3/4” MPT
3/4” MPT
1/38
3100
115
1
50/60
TENV
029-01-005
WMD-20RX(T)
13.7
18.2
1” MPT
1” MPT
1/38
3100
115
1
50/60
TENV
029-01-006
WMD-20RZ(T)
2.9
22.6
3/4” MPT
3/4” MPT
1/38
3100
115
1
50/60
TENV
029-01-007
WMD-30R(T)
10.0
17.7
3/4” MPT
3/4” MPT
1/16
3150
115
1
50/60
TENV
029-01-009
WMD-30RZ(T)
4.6
36.1
3/4” MPT
3/4” MPT
1/16
3150
115
1
50/60
TENV
029-01-010
WMD-40R(T)
13.7
21.3
3/4” MPT
3/4” MPT
1/12
3200
115
1
50/60
TEFC
029-01-012
MD-55R(T)
18.4
26.9
1” MPT
1” MPT
1/9
3400
115/230
1
50/60
TEFC
029-01-013
MD-70R(T)
25.6
31.8
1” MPT
1” MPT
1/4
3400
115/230
1
50/60
TEFC
029-01-014
MD-70RZ(T)
11.4
66.6
3/4” MPT
3/4” MPT
1/4
3400
115/230
1
50/60
TEFC
029-01-015
WMD-100R(T)
35.6
39
1” MPT
1” MPT
1/3
3300
115/230
1
50/60
TEFC
Need a Filter Housing?
See pages 37-39.
Need Hose?
See pages 54-55.
92
800-633-3080 / www.mcpur.com / Mar Cor Purification
Lutz Pumps Drum
®
p p Series
The robust Lutz pump tube with sealless is suitable for pump clean and
dirty, thin-bodied and slightly viscous, aggressive and non-aggressive
liquids out of drums and small or large containers. The polypropylene
pump tube is designed for a wide range of acids and alkalis.
Features and Benefits
pumps
•The PP pump tube features a PVDF pump foot for more durability.
•Designed with an Axial-flow (rotor) impeller for high delivery rate (45
gpm) and low delivery head (up to 31 feet).
•The bearing housing behind the impeller is designed to prevent
pumped liquid from rising between the shaft and the inner tube.
•Motor and tube weigh only 7.4 lbs.
•ODP motor includes on/off switch w/ single-pole thermal over-current
release and 16-foot cord & plug.
•Accessories are standard and are included with complete package.
L utz P ump T ub e
Part
Number
032-21-103
StockProduct
NumberDescription
MSL-PP-41-R HC
Polypropylene Tube
LengthDiameter
Hose
(inches)
(inches)Connection
39
1.6
3/4” HB
Temp.
Limit (ºF)
122
L utz M otor
Part
Number
032-51-036
StockProduct
NumberDescriptionVolts (AC)
HzPhase
B36
Electric, ODP
Complete drum pump assembly requires selecting (1)
Pump Tube and (1) Motor. Other Pump Tube materials
are available.
120
60
1
HP
0.85
Complete Pump Tube and Motor includes the following:
- Wall mount bracket
- 8ft of PVC hose
- 2 hose clamps
- PP Barrel adapter
Need a SDS Delivery System?
See pages 178-179.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
93
ShurFlo Pumps Delivery and Transfer
M od el 8 000 Pu mp s
Features and Benefits
• Flows from 1.5 GPM - self priming.
• Automatic demand.
• Used in delivery and transfer applications that require 1.5 GPM or less.
• Available in 115 VAC
• Pressure ratings up to 100 PSI available.
• Selected models include an internal bypass feature which reduces cycling in
certain low volume applications.
S hur F lo M od e l 8 0 0 0 P umps
PartmodelProduct
Number
Number
description
Pumps
ME41574
8005-233-236
115 VAC 1.5 GPM Demand Pump, 3/8”
031-03-002
8005-733-155
115 VAC 1.5 GPM Demand Pump, 1/2”
031-03-003
8005-733-255
115 VAC 1.5 GPM Demand Pump, 3/8” FNPT
Note: Other ShurFlo pump sizes and/or voltages are available.
Webtrol Pumps Booster
EZ Series
Features and Benefits
• Ideal for Reverse Osmosis and Deionization water applications.
• All listed models are constructed of 316 Stainless Steel.
• Heavy duty stainless steel hex shaft with stainless steel coupling.
• High strength, glass filled Delrin or Noryl thermoplastic impellers, precision
machined for dimensional stability and efficiency.
• Injection molded polycarbonate or Noryl diffusers with molded in stainless
steel wear rings at all critical wear points.
• Heavy wall stainless steel pump housing.
W ebtrol P umps - 6 0 H Z
Part Model Number
Number
ME42115
94
Nominal
Flow
Head
(gpm) (psid)
I/O Port
(inches) HPVoltsPhase
H5B7S16M
5
70
1-1/2 NPT
ME41579
H15B9S16M
15
65
ME42136
H20B6S16M
20
45
ME30318
H20B9S16M
20
ME30324
H35B6S16M
35
Motor
Type
0.75
115/230
1
ODP
1-1/2 NPT
1.5
115/230
1
ODP
1-1/2 NPT
1.0
115/230
1
ODP
75
1-1/2 NPT
1.5
115/230
1
ODP
30
1-1/2 NPT
1.5
115/230
1
ODP
800-633-3080 / www.mcpur.com / Mar Cor Purification
C o n d iti o nin g e q u i p ment
Conditioning equipment
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
95
Commercial Filtering Equipment
M ultime dia F ilters - F le ck 115 V
®
These units will automatically remove the dirt and sediment from your water supply. The special filter
mineral will remove particles as small as 10 microns in size. Multi-Media filters automatically clean
themselves by washing the dirt and sediment to the drain during its backwash cycle. Consists of a
fiberglass mineral tank, PVC internal distributor, automatic control valve, gravel, and bags of media.
Features and Benefits
•Uses Fleck 2850 control valve for automatic backwashing.
•Saves cost of cartridge replacements.
•Fiberglass mineral tank, blue.
•Uses high quality special filter media to filter down to 10 microns.
•Various sizes available.
Specifications
Designed with Top Mount Fleck control valves, 115V/60 Hz.
All control heads are equipped with standard 7-day timers and dry contacts for lock-out capability.
Add approximately 10” to the height of tank to include control valve dimensions.
Water flows from left-to-right when viewing timer.
M ultimedia F ilters - F L E C K ® 1 1 5 V / 6 0 H z S pecifications
C o n d iti o nin g e q u i p ment
PART
NUMBER
CONTROL
VALVE
INLET/OUTLET
SIZE
(INCHES)
DRAIN SIZE
(INCHES)
SERVICE
FLOW
(GPM)
BKW RATE
(GPM)
FILTER
MATERIAL
(FT3)
TANK
(INCHES)
SHIP
WEIGHT
(LBS)
3026313
3026314
3026315
3026316
3026317
3026318
3026319
2750
2850
2850
2850
2850
3150
3150
1 NPT
1-1/2 NPT
1-1/2 NPT
1-1/2 NPT
1-1/2 NPT
2 NPT
2NPT
3/4 NPT
1 NPT
1 NPT
1 NPT
1 NPT
2 NPT
2 NPT
9.4
13
17
21
26
30
38
12
15
20
25
30
40
45
2.0
3.0
4.0
5.0
6.0
8.0
10.0
12 x 52
14 x 65
16 x 65
18 x 65
21 x 65
24 x 65
24 x 72
222
375
500
625
725
850
1,275
Multime dia Filters - F leck 24 V
®
These units will automatically remove the dirt and sediment from your water supply. The special filter
mineral will remove particles as small as 10 microns in size. Multi-Media filters automatically clean
themselves by washing the dirt and sediment to the drain during its backwash cycle. Consists of a
fiberglass mineral tank, PVC internal distributor, automatic control valve, gravel, and bags of media.
Features and Benefits
•Uses Fleck 2750, 2850 or 3150 control valves for automatic backwashing.
•Saves cost of cartridge replacements.
•Fiberglass mineral tank, blue.
•Uses high quality special media to filter down to 10 microns.
•Various sizes available.
Specifications
Designed with top mount 1.5” Fleck control valves, 24V/60Hz
All control heads are equipped with standard 7-day timers and dry contacts for lock-out capability.
Add approximately 10” to height of tank to include control valve dimensions.
Water flows from left-to-right when viewing timer.
M ultimedia F ilters - F L E C K ® 24 V / 6 0 H z S pecifications
96
PART
NUMBER
CONTROL
VALVE
INLET/OUTLET
SIZE
(INCHES)
DRAIN SIZE
(INCHES)
SERVICE
FLOW
(GPM)
BKW RATE
(GPM)
FILTER
MATERIAL
(FT3)
TANK
(INCHES)
SHIP
WEIGHT
(LBS)
3026304
3026305
3026306
3026307
3026308
3026309
3026310
2750
2850
2850
2850
2850
3150
3150
1 NPT
1-1/2 NPT
1-1/2 NPT
1-1/2 NPT
1-1/2 NPT
2 NPT
2NPT
3/4 NPT
1 NPT
1 NPT
1 NPT
1 NPT
2 NPT
2 NPT
9.4
13
17
21
26
30
38
12
15
20
25
30
40
45
2.0
3.0
4.0
5.0
6.0
8.0
10.0
12 x 52
14 x 65
16 x 65
18 x 65
21 x 65
24 x 65
24 x 72
222
375
500
625
725
850
1,275
800-633-3080 / www.mcpur.com / Mar Cor Purification
Commercial Filtering Equipment
W ater So ftener - F leck 11 5 V
®
These units are designed to eliminate hardness in an incoming water supply. Uses high polystyrene cation resin. Requires dry salt for
regeneration of exhausted resins. Brine tank is constructed of heavy duty polyethylene and contains a PVC shut-off float assembly. Consists of a
fiberglass tank, PVC internal distributor, automatic control valve, gravel, bags of softening resin, and a brine tank with float assembly.
Features and Benefits
•Uses Fleck 2750 or 2850 control valve for automatic regen/backwashing.
•Fiberglass mineral tank, blue.
•Uses high quality resins to soften water.
•Various sizes available.
Specifications
Designed with Top Mount Fleck control valves, 115V/60Hz.
All control heads are equipped with standard 7-day timers and dry contacts for lock-out capability.
Add approximately 10” to height of tank to include control valve dimensions.
Water flows from left-to-right when viewing timer.
W ater softeners - F L E C K ® 1 1 5 V / 6 0 H z S pecifications
CONTROL
VALVE
3026620
2750
1 NPT
DRAIN
SIZE
(INCHES)
GRAINS
CAPACITY
PER REGEN
SERVICE
FLOW
(GPM)
BKW
RATE
(GPM)
FILTER
MATERIAL
(FT3)
MINERAL
TANK
(INCHES)
BRINE
TANK
(INCHES)
SALT
CAP.
(LBS)
SHIP
WEIGHT
(LBS)
2
1.0
9 x 48
18 x 40
400
400
500
500
500
600
600
600
600
900
125
150
225
250
300
400
450
625
725
1,100
W
ater
- F9leck
3/4
NPT S oftener
30,000
Grains
Service45,000
BKW10
Mineral
Brine
Salt
3026621
2750
1 NPT
3/4 NPT
2.5 1.5 10 x 54
18 x 40
PartmodelCapacity
Flow
Rate Resin
Tank
TankCapacity Ship Wt.
3) (inches) (inches)(lbs.) (lbs.)
3026622
Number 2850 Number
(gpm)
(ft15
1-1/2 NPTper Regen
1 NPT (gpm) 60,000
4
2.0
12 x 52
24 x 40
3026623
154-01-001 2850
FME-90 TM
1.5NPT 90,000
5
1-1/2
1 NPT 16 90,000
1 NPT 20 120,000
3026624
154-01-002 2850
FME-120 1-1/2
TM 1.5NPT120,000
5
1 NPT 35 150,000
3026625
154-01-003 2850
FME-180 1-1/2
TM 1.5NPT180,000
10
1 NPT 45 180,000
3026626
154-01-004 2850
FME-240 1-1/2
TM 1.5NPT240,000
15
3026627
2850
1-1/2
NPT
1
154-01-005 FME-300 TM 1.5 300,000NPT 45 210,000
15
3026628
2850
1-1/2 NPT
1 NPT
300,000
3026629
2850
1-1/2 NPT
1 NPT
450,000
3.0
21
28
4.0
43
6.0
52
8.0
40
10.0
44
44
14 x 565
16 x 765
21 x10
62
12
24 x 71
24 x12
71
15
25
243.0
x 40
244.0
x 40
245.0
x 40
6.0
24 x 54
24 7.0
x 54
10.0
15.0
500
14 x 65
16 x 65
500
21 x 62
500
21
800x 62
24 x 65
800
24 x 72
30 x 72
30024 x 40
35024 x 40
60024 x 50
75024 x 50
85024 x 50
24 x 50
30 x 48
W ater So ftener - F leck 24 V
®
C o n d iti o nin g e q u i p ment
PART
NUMBER
INLET/OUTLET
SIZE
(INCHES)
These units are designed to eliminate hardness in an incoming water supply. Uses high polystyrene cation resin. Requires dry salt for regeneration
of exhausted resins. Brine tank is constructed of heavy duty polyethylene and contains a PVC shut-off float assembly. Consists of a fiberglass tank,
PVC internal distributor, automatic control valve, gravel, bags of softening resin, and a brine tank with float assembly.
Features and Benefits
•Uses Fleck 2750 or 2850 control valve for automatic regen/backwashing.
•Fiberglass mineral tank, blue.
•Uses high quality resins to soften water.
•Various sizes available.
Specifications
Designed with top mount Fleck control valves, 24V/60Hz.
All control heads are equipped with standard 7-day timers and dry contacts for lock-out capability.
Add approximately 10” to height of tank to include control valve dimensions.
Water flows from left-to-right when viewing timer.
W ater softeners - F L E C K ® 24 V / 6 0 H z S pecifications
PART
NUMBER
CONTROL
VALVE
INLET/OUTLET
SIZE
(INCHES)
DRAIN
SIZE
(INCHES)
GRAINS
CAPACITY
PER REGEN
SERVICE
FLOW
(GPM)
BKW
RATE
(GPM)
FILTER
MATERIAL
(FT3)
MINERAL
TANK
(INCHES)
BRINE
TANK
(INCHES)
SALT
CAP.
(LBS)
SHIP
WEIGHT
(LBS)
3026610
3026611
3026612
3026613
3026614
3026615
3026616
3026617
3026618
3026619
2750
2750
2850
2850
2850
2850
2850
2850
2850
2850
1 NPT
1 NPT
1-1/2 NPT
1-1/2 NPT
1-1/2 NPT
1-1/2 NPT
1-1/2 NPT
1-1/2 NPT
1-1/2 NPT
1-1/2 NPT
3/4 NPT
3/4 NPT
1 NPT
1 NPT
1 NPT
1 NPT
1 NPT
1 NPT
1 NPT
1 NPT
30,000
45,000
60,000
90,000
120,000
150,000
180,000
210,000
300,000
450,000
9
10
15
21
28
43
52
40
44
44
2
2.5
4
5
7
10
12
12
15
25
1.0
1.5
2.0
3.0
4.0
5.0
6.0
7.0
10.0
15.0
9 x 48
10 x 54
12 x 52
14 x 65
16 x 65
21 x 62
21 x 62
24 x 65
24 x 72
30 x 72
18 x 40
18 x 40
24 x 40
24 x 40
24 x 40
24 x 50
24 x 50
24 x 50
24 x 50
30 x 48
400
400
500
500
500
600
600
600
600
900
125
150
225
250
300
400
450
625
725
1,100
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
97
Commercial Filtering Equipment
Carb on Filters - F leck 115 V
®
These units will automatically eliminate chlorine found in many water supplies. These systems use special grades of carbon to absorb the
chemicals from the water. Using Acid Washed Carbon, these units are designed to remove special organic chemicals from the water supply.
Consists of a fiberglass mineral tank, PVC internal distributor, automatic control valve, gravel and bags of carbon.
Features and Benefits
•Uses Fleck 2750, 2850, or 3150 control valve for automatic backwashing.
•Saves cost of cartridge replacements.
•Fiberglass mineral tank, blue.
•Uses high quality carbon to remove chlorine.
Specifications
Designed with Top Mount Fleck control valves, 115V/60Hz
All control heads are equipped with standard 7-day timers and dry contacts for lock-out capability.
Add approximately 10” to height of tank to include control valve dimensions.
Water flows from left-to-right when viewing timer.
C arbon A dsorbers - F L E C K ® 1 1 5 V / 6 0 H z S pecifications
C o n d iti o nin g e q u i p ment
PART
NUMBER
CONTROL
VALVE
INLET/OUTLET
SIZE
(INCHES)
DRAIN SIZE
(INCHES)
SERVICE
FLOW
(GPM)
BKW RATE
(GPM)
FILTER
MATERIAL
(FT3)
TANK
(INCHES)
SHIP
WEIGHT
(LBS)
3026425
3026426
3026427
3026428
3026429
3026430
3026431
3026432
3026433
2750
2750
2850
2850
2850
2850
2850
2850
3150
1 NPT
1 NPT
1 - 1/2 NPT
1 - 1/2 NPT
1 - 1/2 NPT
1 - 1/2 NPT
1 - 1/2 NPT
1 - 1/2 NPT
2 NPT
3/4 NPT
3/4 NPT
1 NPT
1 NPT
1 NPT
1 NPT
1 NPT
1 NPT
1 NPT
5
8
10
13
15
18
20
25
30
5
8
12
20
20
25
25
25
40
2.0
3.0
4.0
5.0
6.0
7.0
8.0
10.0
12.0
12 X 52
14 X 65
16 X 65
21 X 62
21 X 62
24 X 65
24 X 65
24 X 72
30 X 72
100
150
200
350
450
650
700
925
1,100
Carb on Filters - F lec K 24 V
®
These units will automatically eliminate chlorine found in many water supplies. These systems use special grades of carbon to absorb the
chemicals from the water. Using Acid Washed Carbon, these units are designed to remove special organic chemicals from the water supply.
Consists of a fiberglass mineral tank, PVC internal distributor, automatic control valve, gravel and bags of carbon.
Features and Benefits
•Uses Fleck 2750, 2850 or 3150 control valves for automatic backwashing.
•Saves cost of cartridge replacements.
•Fiberglass mineral tank, blue.
•Uses high quality carbon to remove chlorine.
•Various sizes available.
Specifications
Designed with top mount Fleck control valves, 24V/60Hz.
All control heads are equipped with standard 7-day timers and dry contacts for lock-out capability.
Add approximately 10” to height of tank to include control valve dimensions.
Water flows from left-to-right when viewing timer.
C arbon A dsorbers - F L E C K ® 24 V / 6 0 H z S pecifications
98
PART
NUMBER
CONTROL
VALVE
INLET/OUTLET
SIZE
(INCHES)
DRAIN SIZE
(INCHES)
SERVICE
FLOW
(GPM)
BKW RATE
(GPM)
FILTER
MATERIAL
(FT3)
TANK
(INCHES)
SHIP
WEIGHT
(LBS)
3026415
3026416
3026417
3026418
3026419
3026420
3026421
3026422
3026435
2750
2750
2850
2850
2850
2850
2850
2850
3150
1 NPT
1 NPT
1 - 1/2 NPT
1 - 1/2 NPT
1 - 1/2 NPT
1 - 1/2 NPT
1 - 1/2 NPT
1 - 1/2 NPT
2 NPT
3/4 NPT
3/4 NPT
1 NPT
1 NPT
1 NPT
1 NPT
1 NPT
1 NPT
1 NPT
5
8
10
13
15
18
20
25
30
5
8
12
20
20
25
25
25
40
2.0
3.0
4.0
5.0
6.0
7.0
8.0
10.0
12.0
12 X 52
14 X 65
16 X 65
21 X 62
21 X 62
24 X 65
24 X 65
24 X 72
30 X 72
100
150
200
350
450
650
700
925
1,100
800-633-3080 / www.mcpur.com / Mar Cor Purification
Commercial Filtering Parts
C ontr ol Valves - Fleck 2850
The Fleck commercial Series 2850 Softener/Filter Controller is a 1.5” FNPT service flow lead free brass valve. The 2850 is a five cycle
conditioning control valve. The cycles are baskwash, downflow brining, slow rinse, rapid rinse, and downflow service. This valve has a working
pressure from 25 - 125 psi and a temperature rating of 34° - 110°F. Uses a standard 1.5” distributor pipe for maximum flows.
Features and Benefits
•Fully adjustable 5-cycle control delivers
performance.
•7 day clock (115V or 24V) manual or timer initiated
regeneration/backwash.
•Solid lead free brass valve body.
•Time-tested hydraulically balanced piston, seal and
spacer.
•Continuous flow rates is 51 gpm w/ backwash of 49
gpm - ideal for filter applications.
•Consistent brining regardless of salt levels with timed
brine refill.
•Backwash capacity handles tanks up to 30” diameter.
F leck - 2 8 5 0 S eries
PartProduct
Number
description
3026938
Kit, 1700 Injector Assembly (Item # 7-14), Red, 15CF
3026937
Kit, 1700 Injector Assembly (Item # 7-14), White, 7&10CF
3026936
Kit, 1700 Injector Assembly (Item # 7-14), Green, 6CF
3026935
Kit, 1700 Injector Assembly (Item # 7-14), Yellow, 5CF
ME41262
Piston Assembly (Item # 4-6), with Hardwater Bypass
3025280
Piston Assembly (Item # 4-6), No Hardwater Bypass
3024142
Seals and Space Kit for Control Valve (Item # 2-3)
ME41153
O-ring - Top of Tank
ME41492
O-ring
3200 Timer 7-Day 120 V
154-50-112
Timer Motor 120 V
154-50-114
Connecting Link Pin
154-50-115
154-50-117
Retaining Ring
Drive Cam - STF (Black)
154-50-121
Motor, Control Drive Assembly
ME41207
Dry Contact Switch Kit (mounts on brine cam)
ME41168
1700 Brine Assy. Kit (Item # 1-13), 2 GPM
154-50-127
Cover, Black, Non-hinge
ME60533
Tool, seal stuffer
ME21042-24
Timer, Fleck, 3200, 7 Day, 24V
ME20298
Transformer, Plug-in, 110/24V
C o n d iti o nin g e q u i p ment
ME21042
ME41380Motor, Fleck, Timer, 24V
ME41381Motor, Fleck, Drive, 24V
F L E C K - 2 8 5 0 series
F L E C K - 2 8 5 0 series
PART
NUMBER
PRODUCT
DESCRIPTION
PART
NUMBER
PRODUCT
DESCRIPTION
3026340
3026341
3026342
3026343
3026344
3026345
3026346
3026347
1239154
1239155
1239156
ME41068-24
1239157
Control Head, 2850, 60K, Softener, 110V
Control Head, 2850, 90K, Softener, 110V
Control Head, 2850, 120K, Softener, 110V
Control Head, 2850, 150K, Softener, 110V
Control Head, 2850, 180K, Softener, 110V
Control Head, 2850, 210K, Softener, 110V
Control Head, 2850, 300K, Softener, 110V
Control Head, 2850, 450K, Softener, 110V
Control Head, 2850, 60K, Softener, 24V
Control Head, 2850, 90K, Softener, 24V
Control Head, 2850, 120K, Softener, 24V
Control Head, 2850, 150K, Softener, 24V
Control Head, 2850, 180K, Softener, 24V
1239158
1239159
1239160
ME41067
ME41067-24
1238792
1238793
1238794
1238795
1238796
1238797
1238798
1238799
Control Head, 2850, 210K, Softener, 24V
Control Head, 2850, 300K, Softener, 24V
Control Head, 2850, 450K, Softener, 24V
Control Head, 2850, Filter, 110V
Control Head, 2850, Filter, 24V
Flow Control, 4 Gpm, Drain Assy, 2850
Flow Control, 5 Gpm, Drain Assy, 2850
Flow Control, 7 Gpm, Drain Assy, 2850
Flow Control, 10 Gpm, Drain Assy, 2850
Flow Control, 12 Gpm, Drain Assy, 2850
Flow Control, 15 Gpm, Drain Assy, 2850
Flow Control, 20 Gpm, Drain Assy, 2850
Flow Control, 25 Gpm, Drain Assy, 2850
Notes:
1. Each 2850 Control Head is a complete unit but does not include the flow control for the drain. If necessary,
select the correct size as found above or reuse the existing one if applicable and in good working order. All
of these 2850 Control Heads are designed with the No Hardwater Bypass feature.
2. Consult Tech Note 213 on how to determine which Fleck injector is required.
3. Consult Tech Note 221 on how to identify the correct 2850 piston, rod, and plug assembly.
4. When ordering brine tanks or foot valves, please specify model number with appropriate Series name.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
99
Filtering Material
I on E x chang e R esin
Mar Cor Purification uses water softening resin that has a high
capacity, high quality gel-type cation resin capable of meeting
the most exacting requirements of commercial, institutional
and industrial water softeners. It is supplied in the sodium
form as amber colored translucent beads. The beads are
strong and durable ensuring long service life. Tannin resins
(sometimes called organic scavengers) can be used when
tannins or heavy organic material is suspected in incoming
water supplies, primarily from rivers and surface water.
I on E xchange R esin
Part Product
Amount
Ship Wt.
Number
description (Ft3)ContainerApplication (lbs.)
ME50068
Softening Resin
1
Bag
Softening
50
155-01-283
Tannin Resin
1
Bag
Softening
50
3027985Anion Resin
1
Bag
Dealkalizer
53
Carb o n
C o n d iti o nin g e q u i p ment
One of the most common
applications for carbon is for the
removal of incoming chlorinated
water commonly found in most
water supplies. This practice
helps to protect reverse osmosis
membranes and other filtration
equipment not tolerant to
large doses of chlorine. It is
a key filtering media in many
medical applications, including
hemodialysis.
C arbon
Part Product
Number
description
Amount
(Ft3)Container Application
ME50097Acid-Washed Carbon, Dry 1
Bag
Ship Wt.
(lbs.)
Chlorine Removal
With a mesh size of 12 x 40 and an iodine number of at least 950, we offer the very best in high
activity granular carbon. Acid-washed carbon is available to help stabilize pH.
San d an d Grav el
Filter-Ag® granules have irregular surface characteristics affording maximum removal of suspended matter throughout the filter bed.
Typically removes normal suspended solids down to the 20-40 micron range. There is less pressure loss through a bed of Filter-Ag
than through most other filter media. Gravel
S and and G ravel
is used as a filter bed for sediment, multimedia, carbon and other filtration processes. Part Product
Amount
Number
description
(Ft3)Container Application
The Media Kits are designed for a MultiMedia filter re-bed. This consists of various
155-03-216 Filter Agregrate
1
Bag
Sediment Removal
grades of sand and gravel and philterkol
155-03-221 Gravel, #3 grade 1/2
Bag
Filter Bed
material. All of the media required for this
155-03-222 Multi-Media Kit, 16x65
4.91
Boxes
Sediment Removal
type of filter is found in one convenient part
number and corresponds with some of the
155-03-223 Multi-Media Kit, 21x65
7.5
Boxes
Sediment Removal
common multi-media units found in the
Conditioning Equipment section of the catalog.
F u nnels
For loading filtering materials into mineral tanks.
F unnels
PartProduct
Number
description
100
28
155-25-230
Plastic, blue funnel, 2-1/2” opening
155-25-231
Polypropylene, white funnel, 4” opening
800-633-3080 / www.mcpur.com / Mar Cor Purification
Note: All weights are
approximate.
Ship Wt.
(lbs.)
26
50
491
670
Ultraviolet Systems
c o m p lete UV SY ST E M S
Mar Cor offers a variety of Ultraviolet (UV) systems for treating and disinfecting water in medical settings. UV
systems are designed to disinfect water without the use of chemicals. UV systems can provide in excess of 99.0%
reduction of all common water-borne microorganisms through UV exposure within the disinfection chamber.
UV SYSTEM
3016646
Feed Water
20 GPM
115 VAC, 60 Hz
1.5 Amps
1 1/2” FNPT
36 “
U ltraviolet S ystems
1240041
1229142
Product Water
Product Water
Notes: Replacement parts are available for other systems. UV Systems are not designed, sold, or intended for use in producing
water for injection (WFI) or other sterile solutions. Furthermore, UV Systems are not intended to be used outside of the device’s
specifications or limitations. The system must not be used in an explosive environment.
C o n d iti o nin g e q u i p ment
1240040
ME41584
APPLICATION
Product Water
Bicarb on SDS
CAPACITY
15 GPM
20 GPM
30 GPM
2 GPM
ELECTRICAL
120 VAC, 60 Hz
120 VAC, 60 Hz
120 VAC, 60 Hz
120 VAC, 60 Hz
0.6 Amps
0.8 Amps
1.3 Amps
0.38 Amps
CONNECTIONS
1” FNPT
1 1/2” FLANGE
1” FNPT
3/8” FNPT
APPROX. LAMP
36”
36”
36”
12”
LENGTH
LAMP QTY 212 21
SPARE PARTS
LAMP
3016649
ME40450A
ME41552
ME40450A
ME41585
QUARTZ SLEEVE
3016651
1239692
1239692
1239692
ME41886
O RING
3016650
165-64-726
165-64-726
165-64-726
165-64-726
BALLAST
3024399
3024399
4 Wire-3024401
3024399
ME30374
5 Wire-3024400
UV INTENSITY
Included
1240039
Included
1240039
N/A
Need a Final FIlter?
See pages 30-33.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
101
Aquafine Ultraviolet Systems
®
UV PUR I FIE R P A RT S
We offer a wide variety of replacement parts for numerous types of
Aquafine UV units, including a complete line of UV lamps for new and
replacement applications. Used for disinfection, TOC reduction, ozone
destruction, or chlorine/chloramine destruction, the ColorguardTM UV
lamps are designed to maximize the performance of your UV water
treatment system. For more information on complete UV system, please
contact us.
AQUAFINE UV PARTS
PART
NUMBER
C o n d iti o nin g e q u i p ment
102
STOCKPRODUCT
NUMBERDESCRIPTION
Lamps
165-61-108
18063
165-61-109
17498
3023802
17491
165-61-111
17998
165-61-112
18197
165-61-113
17820
165-61-116
18062
165-61-117
18061
165-61-118
18059
165-61-100
3010
ME41585
3011
3016652
3050
ME41552
3084
165-61-104
3098
165-61-106
3089
165-61-216
3052
165-61-219
3087
165-61-220
3095
165-61-225
16678
165-61-227
16676
Quartz Sleeves
ME41886
3110
3150
165-63-103
3198
165-63-104
165-63-105
3184
18347
165-63-106
165-63-252
19882
165-63-253
17751
165-63-256
18348
Ballast
3024401
3354
165-62-057
4035
Replacement Misc. Parts
165-64-725
3244
165-64-726
4253
165-64-748
16458
165-64-750
4205
165-64-752
3901
165-64-763
12422
165-64-766
19685
3024539
4252
165-64-776
16184
Standard, 185 nm Blue - 30” single ended - TOC/Chlorine
Standard, 185 nm Blue - 60” single ended - TOC/Chlorine
Standard, 254 nm Mauve - 30” single ended - Disinfection / Ozone
Standard, 254 nm Mauve - 60” single ended - Disinfection / Ozone
Standard HE, 185 nm Violet - 30” single ended - TOC/Chlorine
Standard HE, 185 nm Violet - 60” single ended - TOC/Chlorine
Validated, 185 nm Yellow - 30” single ended - TOC/Chlorine
Validated, 185 nm Yellow - 60” single ended - TOC/Chlorine
Validated, 254 nm Green - 30” single ended - Disinfection / Ozone
Standard, 254 nm Alum - 12” double ended - Disinfection / Ozone
Standard, 254 nm Mauve - 12” double ended - Disinfection / Ozone
Standard, 254 nm Mauve - 15” double ended - Disinfection / Ozone
Standard, 254 nm Mauve - 30” double ended - Disinfection / Ozone
Standard, 254 nm Mauve - 60” double ended - Disinfection / Ozone
Standard, 254 nm Mauve - 30” double ended - Disinfection / Ozone, High-Temp
Standard, 185 nm Yellow - 15” double ended - TOC/Chlorine
Standard, 185 nm Blue - 30” double ended - TOC/Chlorine
Standard, 185 nm Blue - 60” double ended - TOC/Chlorine
Validated, 185 nm Yellow - 30” double ended - TOC/Chlorine
Validated, 254 nm Green - 30” double ended - Disinfection / Ozone
Open Ended, Double Ended - 10”
Open Ended, Double Ended - 13”
Open Ended, Double Ended - 60”
Open Ended, Double Ended - 30”
Open End, Single Ended - 30”
Domed End, Single Ended - 30”
Domed End, Single Ended - 60”
Open Ended, Single Ended - 60”
MP2-SL, CSL, RBE, SCD - 120V - Magnetic
DW-5, DW-8, SL-10A, SL-1 - 120V - Magnetic
CSL/RBE - EPDM Gasket, 8”
All - EPDM O-ring
All - Viton® O-ring - (black)
Fan - MP-2-SL
Fan - CSL, RBE, SCD - 4” 120V
Nut, Standard compression, cpvc, double end, 25 mm
Nut, Standard compression, cpvc, single end, 25 mm
Nut, Standard compression, cpvc
30” lamp socket
800-633-3080 / www.mcpur.com / Mar Cor Purification
Severn Trent Ultraviolet Systems
UV P u rifier Parts
We offer a variety of spare parts for Severn Trent Ultra Dynamics® ultraviolet systems. We can service most of their
ultraviolet liquid purifiers. Items include replacement lamps, ballasts, quartz sleeves, and miscellaneous fittings
and accessories. If a stock number is not listed below, please call us and we will help you get the part you need.
U V P urifier P arts
Lamps
165-01-101
8050UD
UV Lamp 254 NM, 12”, 4 pin
165-01-102
8060UD
UV Lamp 254 NM, 17”, 4 pin
165-01-103
8090UD
UV Lamp 185 NM, TOC, 17”
165-01-104
5340UD
UV Lamp 254 NM, 36” step
165-01-105
5360UD
UV Lamp TOC, 36”
165-01-106
8040UD
UV Lamp 254 NM
165-01-107
9410UD
UV Lamp 254 NM, step
165-01-108
8030UD
UV Lamp 254 NM, 4 Pin, Flat
X
X
X X X
X X X X
X X X X
X
X
X
X
X X
X
165-01-215
2470UD
UV Lamp 185 NM, TOC, 1 pin
165-01-216
2480UD
UV Lamp 254 NM, 1 pin
165-01-217
2460UD
UV Lamp 254 NM, 1 pin
165-01-218
1530UD
UV Lamp 254 NM, 1 pin
Ballast
165-02-001
8010UD
Ballast, 1-Lamp, 110 VAC / 60 Hz
165-02-002
2240UD
Ballast, 1-Lamp, 110 VAC / 60 Hz
165-02-004
4310UD
Ballast, 2-Lamp, 110 VAC / 60 Hz
Quartz
165-03-001
7260UD
Quartz Sleeve, Open One End
165-03-002
6000UD
Quartz Sleeve, Open One End
165-03-003
2110UD
Quartz Sleeve, Open Both Ends
165-03-004
6080UD
Quartz Sleeve, Open Both Ends
165-03-005
2450UD
Quartz Sleeve, Open One End
165-03-006
2570UD
Quartz Sleeve, Open Both Ends
X X X X X
X
X
X
X
X
X
X
X
X
X
X X X
X X X
X
X
Miscellaneous
165-04-005 1080UD
S.S. Washer for Quartz Sleeve
X X X X
165-04-006
1090UD
O-ring for Quarts, EPR
X X X X
165-04-007
6590UD
O-ring for Quarts, EPR
X
165-04-009 2840MUD Compression Nut
X
X
X X X X X X X
X X X X X X X X
X X
X
165-04-010 2840SUD Compression Nut
165-04-011 4080SUD Compression Nut
165-04-013
1210UD
165-12-001
N/A
X X X
X
X
X X X
Head Gasket, EPR
Remote Alarm, 8102-DM Monitor
C o n d iti o nin g e q u i p ment
165-01-109 8050SUD UV Lamp 254 NM, 12”, 4 pin, step
165-01-110 8060SUD UV Lamp 254 NM, 17”, 4 pin, step
165-04-008 2840LUD Compression Nut
8102-HI-35
8102-HI-20
8102-HI-15
8102-HI-5
8102-HI-2
8102-GI-30/50
8102-GI-70/100
8102-LI-30/50
8102-LI-15
8102-LI-7
8101-PP7
Product description
8101-PP5
Stock
Number
8101-PP3
Part
Number
8101-PP.5
model used in
X X
X X X X X X X X X X X X X X
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
103
Service Deionization and Carbon Exchange
Mar C or Purifi c ation - USA
Service Deionization (SDI) is the most efficient process for removing dissolved salts and
minerals; mixed bed deionizers provide higher quality, more neutral pH, and better removal of
silica and CO2 than separate bed systems. Our portable mixed bed units produce the quality of
water required for any application, up to 18.2 megohm-cm resistivity at 77°F.
Service Carbon is an economical and efficient process for removing chlorine, chloramines
and dissolved organic contaminants from incoming water supplies. Our portable exchange
units contain virgin carbon to ensure maximum water quality and service life of the bed. No
reactivated carbon is ever used in the carbon tanks.
Quality control of the entire process ensures optimal performance of our SDI and Service
Carbon tanks, including media selection, product inspection, documented process controls,
and tank traceability. Only resins and carbon media of the highest quality is used so that water
quality will not be compromised.
Tank Specifications
Typical Applications
C o n d iti o nin g e q u i p ment
General Industry
Hemodialysis
Laboratory
Microelectronics
Rinsing
Pharmaceutical / Biotech
Operating Parameters
Max. Operating Pressure & Temperature
0.25 - 3.6 ft3: 90 psi / 100°F
Turbidity: 5 NTU
Color: 5 units
Organics: 3 ppm
Manganese and Iron: 0.3 ppm
Free Chlorine (for SDI tanks): 0.2 ppm
Construction: Fiberglass
Head: PVC
Internals: PVC
Fittings: See Chart
SDI Media: Mixed Bed Resins
Carbon Media: Acid Washed Carbon
12x40 mesh,
Iodine #950
Note: At Mar Cor Purification USA, all tanks are considered rental and will
remain the property of Mar Cor unless structured otherwise. Rental time
frames consist of 3, 6, and/or 12 month periods. We offer 24/7 service from
any of our US service centers.
MIXED BED SDI - US ONLY
Model
Number
6x18
8x18
6x35
8x44
12x36
14x47
Max.
ResinDimensionsWeight
Flow RateVolume
Inlet / Outlet
W x H
(Wet)
gpm (lpm)
(ft 3)Ports (inch)Lbs.
2.0 (7.6)
2.0 (7.6)
2.5 (9.5)
4.0 (15.1)
7.0 (26.5)
10.0 (37.9)
0.25
0.40
0.50
1.10
2.20
3.60
Side 3/4” MGHT
Side 3/4” MGHT
Side 3/4” MGHT
Side 3/4” MGHT
Top 3/4” MGHT
Top 1” QD
7 x 20
9 x 20
7 x 37
9 x 46
13 x 38
15 x 52
25
39
46
105
198
305
Note: All weights and dimensions are approximate. Higher flow rates can be obtained with
parallel configurations. Jumbo tanks are available upon request.
SERVICE CARBON - US ONLY
Model
Number
6x18C
8x18C
6x35C
8x35C
8x44C
12x36C
14x47C
Max.CarbonDimensionsWeight
Flow RateVolume
Inlet / Outlet
W x H
(Wet)
gpm (lpm)
(ft 3)Ports (inch)Lbs.
2.0 (7.6)
2.0 (7.6)
2.5 (9.5)
3.5 (13.2)
4.0 (15.1)
7.0 (26.5)
10.0 (37.9)
0.25
0.40
0.50
0.85
1.10
2.20
3.60
Side 3/4” MGHT
Side 3/4” MGHT
Side 3/4” MGHT
Side 3/4” MGHT
Side 3/4” MGHT
Top 3/4” MGHT
Top 1” QD
7 x 20
9 x 20
7 x 37
9 x 37
9 x 46
13 x 38
15 x 52
25
39
46
80
105
198
305
Note: All weights and dimensions are approximate. Higher flow rates can be obtained with
parallel configurations.
104
800-633-3080 / www.mcpur.com / Mar Cor Purification
Service Deionization and Carbon Exchange
S ervi c e Dei oniz ation & Carbo n
Service deionization (SDI) is a portable DI and carbon exchange service that allows
customers to produce high purity water in an economical manner. A typical SDI system
includes a carbon tank and ion exchange resin tanks which are designed and configured
to meet your requirements for water quantity, quality and financial goals.
Mar Cor Purification has local offices in 22 locations, 6 of which are regeneration
facilities in the US and Canada to provide timely and economical SDI services. Factory
trained and certified Mar Cor Service Technicians install and maintain the SDI systems
with freshly regenerated ion exchange resins. Each system is supported by a support
center to provide minimum 48 hour response to emergencies.
At Mar Cor, there are no shortcuts on quality. Proper regeneration is critical for optimum
performance, exchange capacity, total volume output and low operating cost. Our quality
control specialists carefully pretest, and then select only resin lots that meet our stringent
requirements, assuring you the highest quality water and maximum performance from each regenerated batch. All applications using our SDI
systems are regenerated in US FDA/QSR inspected facilities.
In addition to the full line of SDI Products, Mar Cor’s service team can provide related items such as replacement parts, filter cartridges,
membranes, UV lights and various types of instrumentation to support your system.
•Minimal capital investment.
•No operational responsibility, Mar Cor automatically services the equipment.
•Water quality & quantity is guaranteed.
•Flexible account configurations to respond to your immediate needs.
•High purity water for temporary situations.
•Stringent quality and traceability procedures ensure performance.
Quality of Our SDI System
•Each regenerated service tank is tested for pressure integrity and product water quality before it is installed in your plant.
•The serial number of each service tank is recorded on the production control log, so total traceability is ensured.
•Document Control: We have a comprehensive document control system. No process changes are made without proper notification and
approval.
•Quality Control: Incoming raw materials must meet quality specifications. During the process, each component has its own operating criteria,
and the entire process is monitored. Lastly, final product materials are double checked for quality with results recorded in the batch record.
•Each tank is chemically sanitized before refilling.
C o n d iti o nin g e q u i p ment
Benefits of Our SDI System
Pr od u c ts
ACTIVATED CARBON removes both chlorine and dissolved organic contaminants. In dialysis applications,
Mar Cor uses a special virgin activated carbon, which reduces Chloramines to acceptable levels for dialysis
applications. Mar Cor acid washed virgin carbons with a 12x40 mesh size and an iodine number of at least
950 units ensure maximum water quality and an extended service life of the carbon bed.
CATION DEIONIZERS have a high capacity to remove positively charged dissolved ionic contaminants such
as calcium, sodium, magnesium, potassium, iron, and manganese (when used in conjunction with an
anion deionizer they can produce a water quality in excess of 400,000 ohm/cm. (.9 ppm TDS as CaCO3).
ANION BED DEIONIZERS have a high capacity to remove negatively charged dissolved ionic contaminants
such as carbonate, bicarbonates, sulfates, chlorides, nitrates and silica (when used in conjunction with a
cation deionizer they can produce a water quality in excess of 400,000 ohm/cm. (.9ppm TDS as CaCO3 )
MIXED BED DEIONIZERS enhanced removal of silica and CO2 , as well as provide higher quality, and a
more neutral pH than separate bed systems. Mar Cor’s units can be used to produce the quality of water
required for any application, up to 18 megohm-cm resistivity at 25°C. In-line quality monitors can be
provided to immediately alert users when resin tanks need to be changed.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
105
Mar Cor Purification Support Services
Servi c e c ontract
Dialysis Water System Service Programs
Mar Cor Purification offers three different levels of service programs,
Silver, Gold, and Platinum Plans. Each plan represents a highly developed and comprehensive maintenance and service plan designed to
keep your system running at peak efficiency. Each service program is
ultimately specified to customers individual needs.
Silver
GOLD
Platinum
Travel and Labor Discount
0%
5%
10%
Parts & Materials Discount
Included
Included
Included
Fixed 200 & 100 Mile Travel Expense
Included
Included
Included
Prices Guaranteed for Life of Contract (1 yr)
Included
Included
Included
Annually (1)
Quarterly (4)
Monthly (12)
1x
4x
12x
1x
4x
12x
1x
4x
12x
1x
1x
1x
Yearly Preventative Maintenance Visits
Complete Visual Inspection & Record Keeping Report:
Water System Logs
System Inspection
C o n d iti o nin g e q u i p ment
Program Features
Water System Service Program
Pretreatment Equipment
Central RO System
Storage Tank and Distribution System
Concentrate Mix & Delivery System
Remote Alarms
Clean & Disinfect
DI System
Central RO System
Low/High pH Cleaning & Disinfection
RO Prefilter(s) change
Storage and Piping Distribution System
Chemical Disinfection
Parts
Filter Changes
Final Filter(s) change
Vent Filter change
Note: Other optional services such as UV lamp change, RO membrane replacement, carbon rebedding,
and other services can be included in any Water System Service Program.
106
800-633-3080 / www.mcpur.com / Mar Cor Purification
R e v erse Osm o sis E q u i p ment
REVERSE OSMOSIS EQUIPMENT
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
107
Central Reverse Osmosis Systems
C W P 1 0 0
5,000 to 13,000 gallons per day
The CWP 100 offers cost-effective, consistent delivery of AAMI grade water standards according to ANSI/AAMI/ISO 13959:2009, water for dialysis at
the point of use. This system is designed to meet all current standards for dialysis quality water. The automated heat disinfection of the distribution loop
and the automated chemical disinfection of the RO and membranes simply and easily reduce biofilm development and minimizes levels of endotoxin,
fungi, yeast and other microbial contaminants. Greater cost-effectiveness is ensured through system efficiency and labor savings. The CWP represents a
simple, convenient, and effective disinfection strategy. Advanced electronics and top quality components also ensure quiet, reliable,and safe operation.
Standard Features
• Hot water loop disinfection
• Medical-grade Wirsbo-cleanPEX® distribution system
• Direct feed operation
• Automated disinfection of the loop and RO membrane
• Integrated end-to-end heat with the Phoenix® Hemodialysis System
• Monitoring software for documentation and verification of disinfection procedures
• 510(k)-cleared as a water purification system for hemodialysis
Optional Items
R e v erse Osm o sis E q u i p ment
Mar Cor Purification offers a complete line of components and accessories, including:
• Blending Valves and Booster Pumps
• Multi-Media Filters
• Water Softeners
• Carbon Adsorption
• Hardness and Total Chlorine Test Kits
• AAMI Water Analysis
• Chemical Disinfectants
C W P 10 0 S pecifications
Product Water - Minimum Capacity At 20˚C And At A Pure Water Outlet Pressure Of 29 Psi (200 Kpa)
Model
Part Number
Product Water in gallons/min (l/min)
Output
101
100975
3.4 (13)
102
101366
5.3 (20)
104
100474
7.7 (29)
106
103256
9.3 (35)
Water Supply
Model
Min Input flow in gallons/min (l/min)
Min Input pressure in psi (kPa)
Max Input pressure in psi (kPa)
+5˚C to +25˚C*
Input
Temperature
101
102
104
106
5.3 (20)
7.9 (30)
13.2 (50)
15.9 (60)
15 (100)
15 (100)
36 (250)
51 (300)
73 (500)
73 (500)
73 (500)
73 (500)
*(Maximum +20˚C if peracetic acid is used for disinfection)
Drain Requirements
Model
Required capacity in gallons/min (l/min)
Note: Maximum flow occurs during flushing
Peak Flow (Rinse)
101
5.3 (20)
102
7.9 (30)
104
13.2 (50)
106
15.9 (60)
Reverse Osmosis Membranes
Modified polyamide, thin film composite
Spiral wound
2–11
Material
Configuration
pH-Tolerance
Power Supply
120/208 V, 60 Hz, 3-phase (5 wires) Other voltages on request
RO-unit 101-104: 1.8 kW; RO-unit 106: 2.5 kW; Heating unit 101-106: 9.0 kW
16 AT + 32 AT, 16 (slow blow) or 40 AT (slow blow) one supply
Main Voltage
Power Rating
Fuse
C W P 10 0 D I M E N S I O N S - i n ( m m )
C W P 10 0 W E I G H T - l b s ( k g )
Model
101
102
104
106
101
102
104
106
Depth
26.4 (670)
26.4 (670)
26.4 (670)
26.4 (670)
Unit
1014 (460)
1113 (505)
1224 (555)
1290 (585)
Width
68 (1720)
75 (1910)
83 (2100)
83 (2100)
Unit W/ Packaging
1466 (665)
1664 (755)
1819 (825)
1885 (855)
Height
79.1 (2010)
79.1 (2010)
79.1 (2010)
79.1 (2010)
Unit In Operations
1709 (775)
1995 (905)
2128 (965)
2216 (1005)
Specifications at 77°F (25°C).
Note: 20 inches (500mm) extra space is required on both sides of the unit.
All weights are approximate.
Feed water requirements and other specifications are available upon request.
108
Model
800-633-3080 / www.mcpur.com / Mar Cor Purification
Central Reverse Osmosis Systems
C W P 1 0 0 - Sp are Parts
C W P 10 0 S PA R E PA R T S
PART
NUMBER
PROCUCT
DESCRIPTION
NOTES
Chemical Pump
WT2510104
WT2510390
WTW607012001
WT2511001
3027819
WTW607014001
O-Ring for Cleaning Connector
Connector, Straight, 8 X 1/4
T-Connector for Chem, 8mm
Fuse, Mini, 1Amp
Valve, Check, w/ Valve Guide
Nipple, w/ Nut
For Male Disinfect Connector
Behind Panel for Male Disinfect Connector
Disinfect Blue T-Connector on Chemical Intake Tube
Disinfect Proportioning Pump
Disinfect Proportioning Pump
Disinfect Proportioning Pump
Membrane Kit, XLE
O-Ring Set, for One RO Module
O-Ring, 18.77 X 1.78
O-Ring, 89.1 X 5.7
Tool, Puller, End Plug 108, CWP
Tool, Alignment, End Caps, CWP
Advise ordering o-ring kit WTW606037001
O-ring Set for Membranes, All Models
Endcap, Small Inside O-Ring
Endcap, Large Outside O-Ring
Tool for removing Membrane Endcaps
Tool Needed to Align Endcaps when Replacing Membranes
Gasket, PEX Fittings, 1/2"
Gasket, PEX Fittings, 3/4"
Gaskets throughout the CWP unit, not for hot fittings
Gaskets throughout the CWP unit, not for hot fittings
Valve, Solenoid, Inlet, 115V, 8W
Valve, Solenoid, Inlet, 115V, Asco
Coil, Solenoid Valve, Asco
Coil, Solenoid Valve, Inlet, 8W
Coil, Solenoid Valve, Inlet, Small
Coil, Solenoid Valve
Membrane, Solenoid Valve, 8W
Membrane, Solenoid Valve, 18W
Membrane, Solenoid Valve, ODE
Kit, Membrane, Solenoid Valve
Kit, Membrane, Solenoid Valve
Kit, Membrane, Solenoid Valve, 8W
Valve, 3-Way, Motor Valve (V138)
Sample Port, Nut And Washer
Inlet Solenoid Valve
Inlet Solenoid Valve, ASCO
Coil for Large ASCO Valve
Coil for Inlet Valve, 8W
Coil for Inlet Valve, Small
Coil for 1/2" Valve
Membrane for Inlet Valve #1
Membrane for Inlet Valve, Large, 18W
Membrane for Solenoid Valve "ODE"
Membrane Kit for ASCO Valve
Membrane Kit for "ODE" Valve
Membrane for Inlet Valve, 8W
Motor Valve
For Sample Ports #9 and #133
Flow Meter Probe, 1.5 - 20 L/min
Flow Meter Probe, 3.0 - 60 L/min
Sensor, Temperature
Transmitter, Flow
For Models 101-102
For Models 103-106
Located on the Return and Tank
Used for all Flow Meters
Pump, RO, Complete, SP2A-21, 3 X 208V
Pump, RO, Complete, SP3A-18, 3 X 208V
Pump, RO, Complete, SP3A-24, 3 X 208V
Main Pump Assy, Models 101-102, SN1000291 and lower
Main Pump Assy, Models 103-104, SN1000291 and lower
Main Pump Assy, Model 106, SN1000291 and lower
PM Kit A, CWP, 1 Year
PM Kit A, CWP, 1 Year
PM Kit B, CWP, 2 Year
PM Kit B, CWP, 2 Year
PM Kit B, CWP, 2 Year
PM Kit B, CWP, 2 Year
PM Kit C, CWP, 4 Year
PM Kit C, CWP, 4 Year
Models up to SN1000194 and 2961
Models from SN1000195 and 2962
Models up to SN2836
Models from SN2837, 1000194 and 2962
Models from SN1000195 to 1000250
Models from SN1000251
Models up to SN2961, from 2962-1000194
Models from SN1000195 and 2962-1000194
Membrane
3028159
WTW606037001
WT2510114
WTW611005001
WTW617001001
WT2650060
Fittings
Valves
WTW620016003
WTW900000896
WTW620004002
WTW620018003
WTW900000134
WTW620022001
WT2510249
WTW609001002
WTW900000138
WTW620006001
WTW620033001
WTW609001003
WTW620030002
WTW606009002
R e v erse Osm o sis E q u i p ment
WT2510974
WT2510165
Sensors
WTW616001001
WTW616002001
WTW616003001
WTW602012001
Pump / Motor
3027996
3027997
3027998
Preventative Maintenance
3028284
3028285
3028286
3028287
3028288
3028289
3028290
3028291
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
109
Central Reverse Osmosis Systems
4 4 0 0 H X Series
3,600 to 11,950 gallons per day
With the need for better bacteria control in dialysis systems, Mar Cor Purification has taken the hot water disinfection technology that is accepted
in the pharmaceutical industry and applied it to the 4400HX system design including the RO with a 510(k) device registration. The fully integrated
design of the RO and distribution system is the first in the industry. The ability to hot water disinfect will reduce bacteria related problems and allow
for regular automated disinfection so that the system has a higher uptime factor.
Standard Features
• 316SS Insulated Distribution Tank
• Electric Heat Exchanger
• Allen Bradley Micrologics PLC
• Stainless Steel VFD Distribution Pump(s)
• Optional Ultraviolet Sterilizer
• Digital Conductivity and Temperature
• NEMA 4/12 Control Enclosures
• All Stainless Steel Piping and Housings
• 75% Water Recovery
Operating Parameters
Operating Pressure: 250 psig (1724 KPA)
Maximum Recovery: 75%
Nominal Rejection: 95-99%
Operating Temperature: 35-95°F (2-35°C)
Minimum Inlet Pressure: 30 psig (210 KPA)
Design Temperature: 77°F (25°C)
Reverse Osmosis Equipment
Configurations
Code: S1 - Storage Tank Design (175 - Gallon)
Hot Water Disinfect RO and Loop
Code: S2 - Direct Feed Design (100 - Gallon)
Hot Water Disinfect RO and Loop
Code: S3 - Storage Tank Design (175 - Gallon)
Cold Water RO and Hot Disinfect Loop
Code: S4 - Direct Feed Design (100 - Gallon) Cold Water RO and Hot Disinfect Loop
4 4 0 0 H X S eries R O
STOCK
NUMBER
MODEL
S1 Configuration
24M36B-2RO-S1 4400HX-4K-S1
44M36B-2RO-S1 4400HX-8K-S1
64M36B-2RO-S1 4400HX-12K-S1
S2 Configuration
24M36B-2RO-S2 4400HX-4K-S2
44M36B-2RO-S2 4400HX-8K-S2
64M36B-2RO-S2 4400HX-12K-S2
S3 Configuration
22M36B-2RO-S3 4400HX-4K-S3
42M36B-2RO-S3 4400HX-8K-S3
62M36B-2RO-S3 4400HX-12K-S3
S4 Configuration
22M36B-2RO-S4 4400HX-4K-S4
42M36B-2RO-S4 4400HX-8K-S4
62M36B-2RO-S4 4400HX-12K-S4
RO CAPACITY
(GPD)
RO
System
TYPEDESIGN
4,000
8,000
12,000
Hot
Hot
Hot
Indirect
Indirect
Indirect
4,000
8,000
12,000
Hot
Hot
Hot
Direct
Direct
Direct
4,000
8,000
12,000
Cold
Cold
Cold
Indirect
Indirect
Indirect
4,000
8,000
12,000
Cold
Cold
Cold
Direct
Direct
Direct
Specifications at 77°F (25°C).
All weights are approximate.
Other models are available upon request.
Feed water requirements and other specifications are available upon request.
110
800-633-3080 / www.mcpur.com / Mar Cor Purification
Central Reverse Osmosis Systems
4 4 0 0 H X Series - s p are p arts
4 4 0 0 H X S PA R E PA R T S
PART
NUMBER
PROCUCT
DESCRIPTION
NOTES
Filters
Filter, Cartridge, 0.05 Micron, 20", Final
Gasket, Filter, 3FOS Hsg
Filter, Cartridge, 0.2 Micron, 10", Vent
Filter, Depth, 1.0 Micron, 20", Prefilter
Gasket, Filter, Prefilter
Gasket, Filter Cap Nut, Prefilter
F4.01, Final Filter
F4.01, Final Filter
F4.00, Tank
F2.00, RO Machine, Hot
F2.00, RO Machine, Hot
F2.00, RO Machine, Hot
Fuse, 70Amp, 600V
Fuse, 10Amp, 600V
Fuse, 15Amp, 600V
Fuse, 50Amp, 600V
Fuse, 6Amp, 250V
Fuse, 4Amp, 250V
Fuse, 0.5Amp, 250V
Fuse, 1Amp, 250V
Fuse, 3Amp, 250V
Fuse, 2.5Amp, 250V
Fuse, 3Amp, 600V
Fuse, 1Amp, 600V
Fuse, 30Amp, 600V
Fuse, 15Amp, 600V
Fuse, 12Amp, 600V
Fuse, 35Amp, 600V
Fuse, 40Amp, 600V
Heater, 15KW, 208/3/60
Heater, 12KW, 208/3/60
F1, HX Control Panel, Main Disconnect
F2, HX Control Panel
F3, F4, HX Control Panel; F4A-C, F5B-C, F6B-C RO Panel
F6, HX Control Panel
F7, F9, HX Control Panel
F8, HX Control Panel; FA, FB RO Panel
F16, HX Control Panel
F11-F15, F20, HX Control Panel
F10, F17-F19, HX Control Pnael
FC, RO Control Panel
F3A-B, RO Panel
F2B-C, RO Panel
F1A, F1B, F1C, RO Panel
F1A, F1B, F1C, RO Panel
F1A, F1B, F1C, RO Panel
FUA, FUB, FUC, RO Panel, Main Disconnect
FUA, FUB, FUC, RO Panel, Main Disconnect
HX4.00, S1 & S3 Unit
HX4.00, S2 Unit
Valve, Ball, SS, 1/4" FNPT
Valve, Solenoid, SS, 1", N/C, 24V/60
Valve, Solenoid, SS, 3/4", N/C, 24V/60
Valve, Solenoid, Ss, 1/2", N/C, 24V/60
Valve, Solenoid, SS, 1/4", N/C, 24V/60
Valve, Solenoid, Repair Kit, 1" & 3/4" EPDM
Valve, Solenoid, Repair Kit, 1/2" EPDM
Valve, Solenoid, Repair Kit, 1/4" FKM
SV2.00,SV2.02,DV2.0, Sample
YV4.00, 4.02, 4.03, 4.04, 2.00, HX Skid & RO
YV4.08, 2.02, 2.03, 2.04, 2.05, 2.07, HX Skid & RO
YV4.09, 2.08, HX Skid & RO
YV2.0, RO
YV4.00, 4.02, 4.03, 4.04, 2.00, 2.02-2.07, HX Skid & RO
YV4.09, HX Skid
YV2.01, RO
Sensor, Conductivity / Temp, 1/2" NPT
Kit, Sensor, Conductivity / Temp, 1/2" NPT
Sensor, Temp, Rtd, 1/4" MNPT X 1.5 Length
Sensor, Conductivity / Temp, Feed
Sensor, Conductivity / Temp, Product
Transducer, PSI, C10, Ss, 0-100, 1/4" NPT
Transmitter, Temp, A10, 4-20Ma
Transmitter, PSI, S-10, SS, 0-100" WC, 1/4" NPT
Transmitter, Conductivity / Temp Sensor
AE/TE4.00, HX Skid
AE/TE4.00, HX Skid, Upgrade, See Tech Note 220
TE4.01, TE4.02, HX Skid
AE/TE2.00, RO Machine, Hot
AE/TE2.01, RO Machine, Hot
PE/PT4.00
TT4.01, 4.02
LE/LT4.00, Tank Level
AI/TI4.00, HX Skid
Pump, Multi-Stage, 1.5Hp
Pump, CHIE Replacment Upgrade Kit
P4.00, 4.01, Distribution
P4.00, 4.01, Distribution, Convert To New Pump
Membrane, H/S, 4X40
ME2.00-2.05, RO Machine, Hot
Lamp, UV, 254NM, DOE, 30"
Quartz Sleeve, UV
Ballast, UV, 120V
O-Ring, UV, Viton
Meter, Running Time, UV, 120V
UV4.0
UV4.0
UV4.0
UV4.0
UV4.0
Flow Meter, Inline, 1.1-11.0 GPM, 1-1/4"
Flow Meter, Inline, 0.6-6.6 GPM, 1-1/4"
FI2.00-2.02, RO Machine, Hot
FI2.00-2.02, RO Machine, Hot
Reverse Osmosis Equipment
279-20-005
3027132
276-26-431
275-20-040
3024630
3024631
Electrical
250-13-834
250-13-537
250-13-539
250-13-832
250-13-133
250-13-130
250-13-112
250-13-117
250-13-127
250-13-125
250-13-524
250-13-513
ME21182
ME21185
ME21186
250-13-837
ME21175
085-65-320
085-65-317
Valves
425-41-103
3024606
3024607
3024608
3026675
425-32-370
425-32-366
425-32-362
Sensors
3027298
3027301
3027126
250-23-647
250-23-398
3027125
3027127
3027128
250-19-865
Pump / Motor
3027557
3027602
Membrane
3024609
UV System
ME41552
1239692
3024400
165-64-748
3027132
Miscellaneous
3027249
3024861
Notes: For RO Pump/Motor part numbers, consult the 4400M Spare Parts section.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
111
Central Reverse Osmosis Systems
2 3 G S eries
2,200 to 16,500 gallons per day
Hemodialysis providers and patients around the world rely on the 23G reverse osmosis machine for push button simplicity and reliability. The 23G RO
is registered with the FDA as a Class II Medical Device and is designed and tested to meet or exceed AAMI requirements for RO product water. At the
heart of the 23G RO is the ECM-100. This solid state controller / monitor is user-friendly. The liquid crystal display (LCD) makes it easy to see operating
parameters. Everything is conveniently displayed in one easy-to-find location. The unique Alarm Message Center identifies individual alarms and helps
facilitate corrective action. You can also program the 23G Controller (ECM-100) to remind you to perform scheduled maintenance and disinfection.
Standard Features
• Quiet TEFC high efficiency pump
• Free standing design makes installation and maintenance easy
• Auto inlet shut-off valve
• Autoflush system
• Unique expandable frame to increase output
• Adjustable Flow Block
• Quality tested spiral wound elements
• Quick-connect permeate manifold service ports
• Centralized, user friendly monitoring panel
• Permeate divert to ensure high quality product
• Chemically compatible with 1% Minncare® Cold Sterilant disinfectant solution
Operating Parameters
R e v erse Osm o sis E q u i p ment
Operating Pressure: 225 psig (1551 KPA)
Maximum Recovery: 75%
Nominal Rejection: 95-98%
Operating Temperature: 35-95°F (2-35°C)
Minimum Inlet Pressure: 20 psig (138 KPA)
Design Temperature: 77°F (25°C)
Electrical: 115V, 60Hz or 220V, 50Hz 3-Phase
Materials of Construction
Frame: Epoxy coated steel
Membrane Elements: TF Polyamide
Membrane Housing: 304L Stainless Steel
Low Pressure Pipe: Sch. 80, PVC
High Pressure Pipe: Polypropylene
Control Enclosure: NEMA 4
Pump: 304L Stainless Steel
ECM-100 Controller
System Status Lights: Run, alarm, permeate divert, status lights and auxiliary lights
Alarm Message Center: Alarm messages, maintenance reminders, interfaces with
system operations and displays date and time
RO operating data
High-contrast LCD module with LED backlighting
User-adjustable alarm limits and timers
Feedwater Requirements
Free Chlorine Level pH Pressure Temperature (Min.) 0.0 ppm (mg/L) (Min.) 5.8 (Min.) 20 PSI (1.4 bar) (Min.) 35ºF (2ºC) (Max.) <0.1 ppm (mg/L)
(Max.) 10.0
(Max.) 60 PSI (4.1 bar)
(Max.) 85ºF (29ºC)
2 3 G S E R I E S R O S P E C I F I C AT I O N S
Standard Model@ 77ºf (25ºc)
Capacity - GPD
Capacity - M3/D
Power - HP
Power - KW
3,0001
11.4
4,5001
17.1
6,000
22.7
7,500
28.4
9,000
34.1
10,500
39.8
12,000
45.5
13,500
51.2
15,000
56.9
16,500
62.5
5
3.7
5
3.7
5
3.7
5
3.7
5
3.7
7.5
5.6
7.5
5.6
7.5
5.6
7.5
5.6
7.5
5.6
1. 50% Recovery Available Only
112
800-633-3080 / www.mcpur.com / Mar Cor Purification
Central Reverse Osmosis Systems
2 3 G - Sp are Parts
2 3 G - sp a r e p a rts
Part
Number
2 3 G - spare parts continued
Product
Description
Part
Number
Product
Description
Clamps
OS1157369
Victaulic coupling, complete with EPDM gasket, 3/4”
Sensors
OS1156630
Sensor, flow, hall-effect, pickup cable (Permeate and concentrate, cable only)
OS1157370
Victaulic coupling, complete with EPDM gasket, 1 - 1/4”
OS1156637
Sensor, flow, turbine, 1” element (Permeate and concentrate)
OS1153148
Victaulic coupling, complete with EPDM gasket, 4”
OS1158824
Transducer, pressure, 0-100 PSI (0-6.9 bar), with cable
OS1158825
Transducer, pressure, 0-500 PSI (0-34.5 bar), with cable
Sensor, pH, 23G
Electrical
OS1163521
PCB assembly, main logic board, ECM-100, 60 HZ
PCB assembly, main logic board, ECM-100, 50 HZ
OS1157517
Sensor, conductivity, feed water, with cable (senses feed water temperature)
OS1163520
PCB assembly, relay board, ECM-100, 50/60 HZ
OS1157516
Sensor, conductivity, permeate water, with cable
3024350
Overload, Motor, AB, 193-EE, IEC, 3PH, 5.4-27A
3024357
Overload, Motor, AB, 193-EE, IEC, 3PH, 9-45A
3024187
Overload, Motor, AB, IEC, 3PH, 3.2-16A
Valves
OS1143433
Control solenoid, stainless steel, 3-way, 1/4” (Inlet, Divert Solenoid) 220 Volt, 50 Hz
3024186
Overload, Motor, AB, IEC, 3PH, 5.4-27A
3024188
Starter, 115V, AB,ENCL w/RESET, NO OL
OS1112563
Control solenoid, stainless steel, 3-way, 1/4” (Inlet, Divert Solenoid) 110 Volt, 60 Hz
3024351
Starter, 115V, 30A/7.5HP/1PH, AB, ENCL, W/RES
Valve, Ball, 1/4”xBarb (Feed, Permeate, and Concentrate)
3024358
Starter, 115V, 43A/7.5HP/1PH, AB, ENCL W/RES
3024189
Starter, 220V, AB, ENCL W/RESET, NO OL
3024352
Starter, 220V, 30A/7.5HP/3PH, AB, ENCL W/RES
3013742
Communication cable,ECM-100
OS1202746
Bracket, mounting, enclosure, ECM-100 (4 needed)
OS1116409
Connector, electrical cord, ECM-100
OS1159694
OS1156629
Ribbon Cable, 16 cond, ECM-100 (Connects main logic board to relay board)
ECM-100 Controller, 60 HZ
OS1200387ECM-100 Controller, 50 HZ
O-ring, Viton®, 110, 70 DUR (orifice plunger O-ring)
OS1113269
O-ring, Viton®, 115, 70 DUR (orifice base O-ring)
OS1143426
O-ring, EPDM, 014, 70 DUR (orifice base, tip O-ring)
OS1111540
Hose barb, nylon, 3/4” hose barb x 1/2” MPT
OS1111835
Hose barb, nylon, 90, 1/2” MPT x 3/4”
OS1110435
Connector, PPL, 1/4” tube x 1/4” MPT
OS1110131
Connector, PPL, 3/8” tube x 1/4” FPT
OS1110129
Elbow, PPL, 90, 1/4” tube x 1/4” MPT
OS1110069
Elbow, PPL, 90, 3/8” tube x 1/4” MPT
OS1110036
Plug, pipe, nylon, square, 1/8” MPT
OS1110519
Plug, pipe, nylon, square, 1/4” MPT
OS1112653
Plug, pipe, nylon, square, 1/2” MPT
ME60067
Tube, PE, 1/4” Blue
ME60049
Tube, PE, 3/8” Blue
Valve needle, 316, 1/4” MPT, straight (Concentrate valve)
OS1225678
Valve, actuated, 1” diaphragm inlet Aquamatic® valve (Non-spring loaded, permeate divert valve)
OS1225680
Valve, actuated, 1” diaphragm divert Aquamatic® valve
(Spring loaded, concentrate valve)
Inlet shut-off ball valve, PVC, 1”, SOC, MIP
1227957
OS1153037
Valve, solenoid, stainless steel, 1/4” FPT, 110V/60Hz (Auto-flush)
OS1113930
Valve, relief, pressure, plastic, 0.25 FPT
OS1110643
Valve, actuated, diaphragm inlet (Pump inlet)
4” Housing Spare Parts
OS1117469
End cap, housing, plastic, SH, HP808A
Flow Block & Connectors
OS1156745
Kit, O-ring, 0.75 adjustable orifice
OS1114311
ME40291
OS1110030
OS1157305
Membrane element housing, SH-1/411 (304) 4 port, Vitaulic
OS1117167
Interconnector kit, 4” membrane element with O-rings
OS1118748
O-ring, EPDM, interconnector (Requires 6 O-rings per housing)
OS1156928
Plug, interbank, PVC (Requires 1 interbank O-ring, P/N OS1158675)
OS1158675
O-ring, interbank, -207, EPDM, 70 DUR
OS1117827ATD for permeate plug (Installed at bottom of housing to support membrane)
OS1157934
Permeate plug (Installed on bottom of housing)
OS1110103
Connector, Tube x MPT, 0.38 x 0.50 (Located on top of housing)
Membrane kit, Interconnector (1), adapter (1), o-rings (7), permeate plug (1)
3024813
Miscellaneous Parts
OS1156927
Foot, self-leveling, threaded (Used with 1-1/4” or 1-1/2” Adapter)
OS1158310
Adapter, 1-1/4”, square (1 each, used on frame extension only)
OS1158311
Adapter, 1-1/2”, square (3 each, used on main frame, 1-4 housings)
OS1156775
Plumbing, high pressure, spool piece, 3/4” x 8 1/4” (Used in front of concentrate return plumbing in place of housing)
OS1162024
QD,MPT x female, 3/8 (Female coupling threaded into permeate manifold)
OS1162025
QD,Straight, male w/o check valve (Attaches to P/N OS1162024)
OS1155820
Plumbing, intermediate, stainless steel, 1” (U-shaped concentrate crossover plumbing)
OS1158312
(Required to expand machine from 2, 3, or 4 housings up to 5 – 10 housings)
OS1159055
(Required to expand from between 2-10 housings to 11 or 12 housings)
OS1157184
(Plumbing parts provided to add 1 SS housing, membrane not included)
3027262
Membrane, 423G-FF
3027594
Kit, Discontinued OS1229398 membrane replacement
Pumps/Motors
3024269
Pump, 5HP, 1P, Grundfos CRN 3-21
3024170
Pump, 5HP, 3P, Grundfos CRN 3-21
3024268
Pump, 7.5HP, 1P, Grundfos CRN 5-18
3024172
Pump, 7.5HP, 3P, Grundfos CRN 5-24
3024171
Pump, 7.5HP, 3P, Grundfos CRN 5-18
3024457
Pump, QS Replacement, Kit, 3HP, 1PH
3024458
Pump, QS Replacement, Kit, 5HP, 1PH
3024207
Pump, QS Replacement, Kit, 3HP, 3PH
3024206
Pump, QS Replacement, Kit, 5HP, 3PH
3024205
Kit, expansion frame Kit, expansion frame, EL Kit, SHA expansion OS1157220
Permeate pressure relief kit
OS1157290
Permeate divert kit
Kit, 6ch Alarm Pkg, 23G, 60HZ, white
Pump, QS Replacement, Kit, 7.5HP, 3PH
Pre-Filter
ME40063
OS1202592
Kit, pH, 23G
Pre-Filter cartridge, PPL, 10”, 5 micron, GX05-10(40/case)
OS1160132
Caster swivel, 250#, 4”, 1.50TB
Pre-Filter cartridge, PPL, 20”, 5 micron, GX05-20(20/case)
OS1160133
Caster swivel, 250#, 4”, 1.25TB
ME40170
OS1157219
Housing, FLT, PPL, 10”, blue, with pressure relief
OS1110573
Housing, FLT, PPL, 20”, blue, with pressure relief
3024197
R e v erse Osm o sis E q u i p ment
OS1158314
1233199
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
113
Central Reverse Osmosis Systems
4 4 0 0 M S eries
4,000 to 24,000 gallons per day
The Biolab 4400M Series Medical RO Systems are designed to produce up to 17 USgpm (3.86 m3/h) of pure water. The 4400M Series provides
high quality product water, user-friendly controls, durable construction, and easy installation. This Series of RO machines are licensed with
Health Canada and the USFDA 510(k) as medical devices. .
Typical Medical Applications
Hemodialysis
Clean sterilize reuse (CSR)
Sterile Processing Department (SPD)
Central Laboratory
Humidification Systems
Standard Features
R e v erse Osm o sis E q u i p ment
1.0 - micron pre-filter
Automatic inlet shut-off valve
Multi-stage 316SS centrifugal pump, TEFC Motor 208/3/60Hz
Three variable flow meters
Pump Recycle
Programmable auto-flush feature
Digital system control
Adjustable low quality set point
Adjustable reject recirculation
Clean-In-Place valving
Automatic permeate divert system add-on
Up to 75% recovery
Operating Parameters
Operating Pressure: 250 psig (1724 KPA)
Maximum Recovery: 75%
Nominal Rejection: 95-99%
Operating Temperature: 35-95°F (2-35°C)
Minimum Inlet Pressure: 30 psig (210 KPA)
Design Temperature: 77°F (25°C)
Materials of Construction
Frame: Epoxy coated steel
Membrane Elements: TF Polyamide
Membrane Housing: Stainless Steel
Low Pressure Pipe: Sch. 80, PVC
High Pressure Pipe: Stainless Steel
Control Enclosure: NEMA 4/12
Pump: Stainless Steel
4 4 0 0 M 6 0 H z S pecifications @ 2 5 ° C
Standard Systems
MODEL NUMBER
PERMEATE
GPM (LPM)
CONCENTRATE
GPM (LPM)
MOTOR
HP
ELEMENTS
NUMBER
INLET
IN (MM)
PERMEATE
IN (MM)
CONCENTRATE
IN (MM)
4400M-4K
2.8 (10.5)
4400M-8K
5.6 (21.2)
4400M-12K
4400M-16K
WEIGHT
LBS (KG)
0.8 (3.0)
2.0
2
3/4 (1.9)
1/2 (1.3)
1/2 (1.3)
438 (199)
1.8 (6.8)
3.0
4
3/4 (1.9)
3/4 (1.9)
3/4 (1.9)
506 (230)
8.3 (31.4)
2.8 (10.6)
5.0
6
1 1/2 (3.8)
3/4 (1.9)
3/4 (1.9)
627 (284)
11.0 (41.6)
3.7 (14.0)
5.0
8
1 1/2 (3.8)
1 (2.5)
1 (2.5)
721 (327)
CONCENTRATE
GPM (LPM)
MOTOR
HP
ELEMENTS
NUMBER
INLET
IN (MM)
PERMEATE
IN (MM)
CONCENTRATE
IN (MM)
WEIGHT
LBS (KG)
Non Standard Systems (Additional Lead Time Will Apply)
MODEL NUMBER
PERMEATE
GPM (LPM)
4400M-6K
4.2 (15.9)
1.3 (4.9)
3.0
3
3/4 (1.9)
1/2 (1.3)
1/2 (1.3)
481 (218)
4400M-10K
6.9 (26.1)
2.3 (8.7)
5.0
5
3/4 (1.9)
3/4 (1.9)
3/4 (1.9)
593 (269)
661 (300)
4400M-14K
9.5 (36.0)
3.2 (12.1)
5.0
7
1 1/2 (3.8)
3/4 (1.9)
1 (2.5)
4400M-18K
12.5 (47.3)
4.2 (15.9)
7.5
9
1 1/2 (3.8)
3/4 (1.9)
1 (2.5)
764 (347)
4400M-20K
13.9 (53.0)
4.7 (17.8)
7.5
10
1 1/2 (3.8)
1 (2.5)
1 (2.5)
783 (355)
4400M-24K
16.7 (64.4)
5.7 (21.6)
7.5
12
1 1/2 (3.8)
1 (2.5)
1 (2.5)
832 (377)
System Dimensions: 77.5” High x 38” Wide x 29” deep (All weights and dimensions are approximate). Example: 4400M-8K = 8,000 GPd
Specifications at 77°F (25°C).
All weights are approximate.
Other models are available upon request.
Feed water requirements and other specifications are available upon request.
114
800-633-3080 / www.mcpur.com / Mar Cor Purification
Central Reverse Osmosis Systems
4 4 0 0 M S eries - s pare p arts
4400M RO MACHINE
SPARE PARTS
4400M RO MACHINE
SPARE PARTS continued
Part Product
NumberDescription
Prefilter
275-20-040 2.5” x 20” 1-micron filter (20 per case)
1233955 4.5” x 20” 1-micron filter
285-85-002 O-ring, housing, 3/4”
285-85-003 O-ring, housing, BB
ME60392 Filter housing wrench, 3/4”
285-83-004 Filter housing wrench, BB
Valves
425-32-420 1” Solenoid Valve, brass, 24/60 (inlet)
425-32-429 1-1/2” Solenoid Valve, brass (inlet)
425-41-103 1/4” Ball Valve, SS (sample)
425-09-456 1/2” Needle Valve, SS (concentrate, recycle)
OS1113930 1/4” Pressure Relief Valve
425-32-438 1/2” Solenoid Valve, brass, 24/50
425-13-393 3-Way Electric Ball Valve (divert)
Flows & Pressures
300-15-377 0-300 PSI Gauge, SS
300-15-371 0-100 PSI Gauge, brass
303-34-580 1/4” Pressure Switch, brass
310-18-142 Flow Meter, 0.6 - 6.6 gpm, 1 1/4”
310-18-143 Flow Meter, 1.1 - 11.0 gpm, 1 1/4”
310-18-145 Flow Meter, 1.3 - 13.2 gpm, 1 1/2”
Membrane & Housing
3024580 Membrane, 4x40, with adapter
3025014 Membrane, 4400M-FF
3025710 4x40 Housing with end caps**
1229990 End Cap, 4.0**
OS1151580 O-ring, internal, end cap**
1270003 O-ring, external, end cap**
3027181 4x40 Housing, SS, with end caps
3025847 End Cap, black, and clamp kit
486-13-106 Gasket, U-packing, VSH style
486-40-148 O-ring, small, VSH style
Adapter, membrane, with O-rings
3024579
Connectors
374-22-108 1/2” TU Stem x 1/2” MNPT Adapt
374-14-113 1/2” TU Tee
374-12-111 1/2” TU Union Elbow
374-44-105 1/2” Locking Clip, Black
365-12-052 1/2” Black Tubing, PE
375-03-007 1/2” TU x 1/2” FNPT Elbow, F&T
375-09-009 1/2” TU x 1/2” MNPT Elbow, F&T
375-09-002 1/4” T x 1/4” M Elbow, F&T
375-11-002 1/4” T x 1/4” F Elbow, F&T
368-32-002 1/4” Black Tubing, PE
421-56-028 Fitting, male connection 5/8” T x 3/4” FPT, 316SS
419-01-161 Fitting, U-tube, 5/8”
Controls
250-19-164 Digital Controller, RO
250-19-167 Display, RO
250-19-176 Conductivity sensor
250-18-700 Indicator LED bulb
Pumps/Motors
3027202 CRN1-11 Pump & Motor 208-230 1.5HP, 3PH, 2K
3027203 CRN1-17 Pump & Motor 208-230 2HP, 3PH, 4K
3027204 CRN3-15 Pump & Motor 208-230 3HP, 3PH, 6K
3027205 CRN3-17 Pump & Motor 208-230 3HP, 3PH, 8K
3027206 CRN3-23 Pump & Motor 208-230 5HP, 3PH, 10K
3027207 CRN5-16 Pump & Motor 208-230 5HP, 3PH, 12K,14K, 16K
3027208 CRN5-18 Pump & Motor 208-230 7.5HP, 5PH, 18K
3027209 CRN5-22 Pump & Motor 208-230 7.5HP, 5PH, 24K
3013727 Seal Kit, Pump CRN
024-19-965 O-ring Kit, Pump CRN
024-19-971 Pump Stack, CRN1-11
024-19-972 Pump Stack, CRN1-17
024-19-973 Pump Stack, CRN3-15
024-19-974 Pump Stack, CRN3-17
024-19-975 Pump Stack, CRN3-23
024-19-976 Pump Stack Assy, CRN5-16
024-19-977 Pump Stack Assy, CRN5-18
024-19-978 Pump Stack Assy, CRN5-22
Miscellaneous
3025895 Kit, 30 Gallon Disinfectant Tank and Pump
R e v erse Osm o sis E q u i p ment
Part Product
NumberDescription
Notes:
** RO machines purchased prior to 9/28/04 will have OSMO brand membrane housings. For replacement parts, use the part numbers that are
identified with ** under the MEMBRANE & HOUSING section. Refer to Tech Note 218 for more information about housings, end caps, and
membranes.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
115
Central Reverse Osmosis Systems
M4 Series
2,200 to 13,200 gallons per day
Our M4-series RO machines are designed for durable operation, high quality product water production,
easy installation and straightforward control. In addition, the M4 Series Reverse Osmosis System is manufactured in an FDA registered facility. This machine is for non-medical applications in the U.S. and Canada.
Operating Parameters
Standard Features
Operating Pressure: 100 - 140 psig (689 - 965 KPA)
Maximum Recovery: 75%
Nominal Rejection: 95-98%
Operating Temperature: 55-85°F (13-30°C)
Minimum Inlet Pressure: 30 psig (208 KPA)
Design Temperature: 77°F (25°C)
Electrical: 3-phase, 208-230/460V, 60Hz, or 1-Phase, 220V, 60Hz and 220V, 50Hz
• Low-energy design reduces electrical
requirements and operating costs
• 5-micron pre-filter
• Automatic inlet shut-off valve
• Permeate and concentrate flow meters
• Remote machine on/off capability
• Thermal motor protection
• Pre/Post-filter, primary, and final pressure
gauges
• Flow control center including concentrate
and recycle valves
• Autoflush system
• Low inlet pressure switch
• Digital conductivity meter
• Alarms: Low inlet pressure, motor starter
overload
• Chemically compatible with 1% Minncare®
Cold Sterilant disinfectant
Materials of Construction
R e v erse Osm o sis E q u i p ment
Frame: Powder-Coated Carbon Steel
Membrane Elements: TF Polyamide
Membrane Housing: 304L Stainless Steel
Low Pressure Pipe: Sch. 80, PVC
High Pressure Pipe: Reinforced Rubber Hose
Permeate/Concentrate Tubing: Polyethylene, NSF
Control Enclosure: NEMA 1
Pump: 304L Stainless Steel
Connections: 3/4 inch
M4 60Hz SERIES RO MACHINE
MODELPERMEATECONCENTRATE
Number
(GPM)
(GPM)
M4-2200
M4-2200
M4-2200
M4-4400
M4-4400
M4-4400
M4-6600
M4-6600
M4-6600
M4-8800
M4-8800
M4-8800
M4-11000
M4-11000
M4-11000
M4-13200
M4-13200
M4-13200
1.5
1.5
1.5
3.0
3.0
3.0
4.5
4.5
4.5
6.0
6.0
6.0
7.5
7.5
7.5
9.0
9.0
9.0
1.5 - 0.5
1.5 - 0.5
1.5 - 0.5
3.0 - 1.0
3.0 - 1.0
3.0 - 1.0
4.5 - 1.5
4.5 - 1.5
4.5 - 1.5
6.0 - 2.0
6.0 - 2.0
6.0 - 2.0
7.5 - 2.5
7.5 - 2.5
7.5 - 2.5
9.0 - 3.0
9.0 - 3.0
9.0 - 3.0
MOTOR
HP
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
ELEMENTS
(Array)Voltage
1 (1)
1 (1)
1 (1)
2 (1-1)
2 (1-1)
2 (1-1)
3 (1-1-1)
3 (1-1-1)
3 (1-1-1)
4 (1-1-1-1)
4 (1-1-1-1)
4 (1-1-1-1)
5 (2-1-1-1)
5 (2-1-1-1)
5 (2-1-1-1)
6 (2-2-1-1)
6 (2-2-1-1)
6 (2-2-1-1)
208V
230V
460V
208V
230V
460V
208V
230V
460V
208V
230V
460V
208V
230V
460V
208V
230V
460V
Dimensions
H x w x D (in.)
50 x 30 x 20
50 x 30 x 20
50 x 30 x 20
50 x 30 x 20
50 x 30 x 20
50 x 30 x 20
55 x 30 x 20
55 x 30 x 20
55 x 30 x 20
55 x 30 x 26
55 x 30 x 26
55 x 30 x 26
60 x 30 x 26
60 x 30 x 26
60 x 30 x 26
60 x 30 x 26
60 x 30 x 26
60 x 30 x 26
WEIGHT
(lbs.)
170
170
170
185
185
185
215
215
215
235
235
235
325
325
325
345
345
345
M4 50Hz SERIES RO MACHINE
MODELPERMEATECONCENTRATE
NUMBER
(GPM)
(GPM)
M4-2200
M4-4400
M4-6600
M4-8800
M4-11000
M4-13200
1.5
3.0
4.5
6.0
7.5
9.0
1.5 - 0.5
3.0 - 1.0
4.5 - 1.5
6.0 - 2.0
7.5 - 2.5
9.0 - 3.0
MOTOR
HP
1.5
1.5
1.5
1.5
2.0
2.0
ELEMENTSDimensions
(Array)VOLTAGE
H x w x D (in.)
1 (1)
2 (1-1)
3 (1-1-1)
4 (1-1-1-1)
5 (2-1-1-1)
6 (2-2-1-1)
220V
220V
220V
220V
220V
220V
Specifications at 77°F (25°C).
All weights are approximate.
Feed water requirements and other specifications are available upon request.
116
800-633-3080 / www.mcpur.com / Mar Cor Purification
50 x 30 x 20
50 x 30 x 20
55 x 30 x 20
55 x 30 x 26
60 x 30 x 26
60 x 30 x 26
WEIGHT
(lbs.)
170
185
215
235
325
345
Central Reverse Osmosis Systems
M 4 Series - sp are p arts
M 4 S eries R O
SPARE PARTS
M 4 S eries R O
SPARE PARTS continued
Part Product
NumberDescription
Part Product
NumberDescription
Connectors / Fittings
1235837 Connector, Brass, HSB X MPT, 0.62” X 0.5”
OS1110294 Connector, PPL, Tube X MPT, 0.25”
1235832 Connector, PPL, Tube X MPT, 0.50”
OS1110435 Connector, PPL, 1/4” tube x 1/4” MPT
OS1110129 Elbow, PPL, 90,1/4” tube x 1/4” MPT
1235816 Elbow, 90°, PPL, MPT X Tube, 0.50”
1235863 Elbow, 90°, PPL, MPT X Tube, 0.38” x 0.50”
1235862 Tee, PPL, Tube, 0.50”
Electrical
1235874 Electrical Assembly, 50HZ DLX
1235866 Electrical Assembly, 60HZ DLX
OS1223322 Motor Starter, w/enclosure, 110V
OS1223323 Motor Starter, w/enclosure, 220V
Hoses / Tubing
3024398 Hose,Hydraulic,5/8 ID
1228208 Hose, 3/4”, 150 PSI gray
OS1110092 Tubing, Nylon, 0.25” OD
ME60067 Tube, PE, 1/4” Blue
ME60451 Tube, PE, 1/2” Blue
Instrumentation
ME40337 Flow Meter 0.5-5.0 GPM
ME40396 Flow Meter 2-10 GPM
1235817 Pressure Gauge, 0-100 PSI
1235818 Pressure Gauge, 0-300 PSI
Membranes, Housings, & Associated Hardware
0S1110573 Housing,FLT,PPL,20”,blue,with pressure relief
ME40170 Pre-Filter cartridge,PPL,20”,5 micron,GX05-20 (20/case)
1235877 Membrane Element Housing, 4” x 40”
1235878 Membrane Element, DESAL AG4040T1305
1235879 Closure Kit, 4” Flared Housing
1229990 Endcap, 4” Flared Housing
ME41811 Permeate Plug, MPT, 0.50”
1235844 Bushing, Brass, 0.75” MPT X 0.50 “ FPT
1270003 O-ring, EPDM 342
OS1151580 O-ring, EPDM 116
Pumps & Accessories
1235876 Pump, TF SS1816X, 3HP, TEFC, 3PH, 50HZ
1235875 Pump, TF SS1823XB, 3HP, TEFC, 3PH, 60HZ
1235873 Pump, TF SS1823XB, 5HP, TEFC, 3PH, 50HZ
1235872 Pump, TF SS1832XB, 5HP, TEFC, 3PH, 50HZ
OS1120264 Pump Discharge Screen, 1.25”
OS1157370 Victaulic coupling, complete with EPDM gasket, 1-1/4”
Sensors
3001794 Pressure switch
ME12131 Sensor probe
ME30151 Temperature switch
ME30150 Temperature transducer
ME30149 Thermowell, SS
ME20178 Thermistor
Valves
1235871
1235870
1235869
1235868
1235867
1235842
1235865
1235770
1235819
1235864
Concentrate Needle Valve (2200 GPD)
Concentrate Needle Valve (4400 GPD)
Concentrate Needle Valve (6600 GPD)
Concentrate Needle Valve (8800 GPD)
Concentrate Needle Valve (11000, 13200 GPD)
Recycle Needle Valve (All Models)
Auto flush Solenoid Valve, 50HZ
Auto flush Solenoid Valve, 60HZ
Inlet Solenoid Valve, 60HZ
Inlet Solenoid Valve, 50HZ
R e v erse Osm o sis E q u i p ment
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
117
Central Reverse Osmosis Systems
V & Z S eries - Sp are Parts
V & Z S eries R O
SPARE PARTS
V & Z S eries R O
SPARE PARTS continued
R e v erse
e r s e Osm
O s m o sis
sis Equipm
ment
ent
Part Product
NumberDescription
Part Product
NumberDescription
Electrical
3000619 Cycle timer (auto flush), RO’s 2006 and newer
3000769 Cycle timer (auto flush) Retro Kit, RO’s pre-2006
ME20007 Disinfect switch
ME30118 Switch,Float,Tank,1-1/4 NPT
1242430 Fuse, ¾ KMP
ME20120 Fuse, 1 AMP
ME21144 Lamp, 1/2” VAC, green, incandescent
ME20127 Lamp, 1/2” VAC, red, incandescent
1235402 Motor contactor delay timer relay
ME30123 Override switch, overtemp
ME21136 Override switch, RO
1263877 PCB assembly, conductivity, replacement, LV
ME12312 PCB assembly, display
ME12310 PCB assy,% rejection
ME20089 Plug-In relay
1236035 Power switch, DPST
1234709 Pressure switch delay timer relay
ME21140 Relay, adjustable timer
1234710 Relay, motor start, A26 SRS
1235403 Relay, motor start, A30 SRS
ME30398 Relay, TA O-Load, 13-19A
ME30401 Relay, TA O-Load, 18-25A
ME30394 Relay, TA O-Load, 4.5-6.5A
ME30400 Relay, TA O-Load, 7.5-11A
3025715 Solenoid valve 1”, pilot type
3025716 Solenoid valve ¾”, pilot type
1270099 Overide timer retro kit, 24v
1269708 Overide timer, 24v
3000845 Lamp, ½” VAC, green, LED
3000844 Lamp, ½” VAC, red, LED
ME30399 Thermal overload 10-14 AMP
ME30397 Thermal overload 24-32 AMP
1231323 Transformer, 240-460V
ME41582 Valve, ball, 1”, electrical
Flow Block
ME12261 Manifold block, Input, Z-Series
Pumps/Motors
ME30199 Motor, 200V 3HP, 3PH submersible
ME30202 Motor, 230V 3HP, 3PH submersible
ME30203 Motor, 230V 5HP, 3PH submersible
ME30205 Motor, 460V 3HP, 3PH submersible
ME30195 Motor, 460V 5HP, 3PH submersible
ME30194 Motor, 208V 5HP, 3PH submersible
ME30207 Motor, 460V 7.5HP, 3PH submersible
3024149 Motor,3HP,240V,1PH,Franklin,316SS
3024148 Motor,5HP,230V,1PH,Franklin,316SS
3022324 Kit,3HP,PMP/MTR replacement,208VAC,LV
3022323 Kit,5HP,PMP/MTR replacement,208VAC,LV
3022325 Kit,7.5HP,PMP/MTR replacement,208VAC,LV
3002234 Kit,3HP,PMP/MTR replacement,208VAC,HV
3002233 Kit,5HP,PMP/MTR replacement,208VAC,HV
3002232 Kit,7.5HP,PMP/MTR replacement,208VAC,HV
ME10251 Pump only, for 7.5HP unit Whisperflow, Low pressure
ME10261 Pump only, for 5HP unit Whisperflow
ME10327 Pump, end plate assembly, 7.5HP, Hi pressure
Pre-Filter
ME40171 Pre-Filter Assembly, 20”
ME40170 Pre-Filter cartridge,PPL,20”,5 micron,GX05-20 (20/case)
Sensors
3001794 Pressure switch
ME12131 Sensor probe
ME30151 Temperature switch
ME30150 Temperature transducer
ME30149 Thermowell, SS
ME20178 Thermistor
Valves
ME40291 Ball valve (for vent on pump can)
ME40714 Ball valve (Supply Pressure Valve)
ME40173 Valve,ball,Union,1”
ME40352 Valve,ball,Union,3/4”
ME12891 Pressure regulator assembly, V-Series
ME40397 Pump pressure valve
ME40700 Waste flow valve
ME40086 Waste pressure valve
Miscellaneous Parts
ME40620 Elbow, PVC, 1/2” Slip x Slip, Sch 80
ME40337 Flow meter, 0.5-5.0 GPM
ME40396 Flow meter, 1.0-10 GPM
ME40127 Flow meter, 6-20 GPM
ME40674 Gauge, 0-100 PSI
ME40675 Gauge, 0-600 PSI
ME14900 Membrane kit, Fiberglass Housing
ME14899 Membrane kit, Stainless Steel Housing
ME60232 Membrane replacement tool
3025014 Membrane, CMED-HRPA
ME40709 Nipple, PVC, 1/2” x 12”, Sch 80
ME40863 QD, Male x 1” MNPT,Cam-loc
ME40864 QD, Female x 1” barb,Cam-loc
1229980 ROMA, SS, 4 x 40, 1 MOD, FT Adapt
ME40389 Tee, PVC, 1/2” Slip, Sch 80
ME40622 Union, PVC, 1/2” Slip x Slip, Sch 80
ME14440 Wire lead kit, 8 Gauge, Franklin
ME14439 Wire lead kit, 8 Gauge, Grundfos
ME14106 Wire seal kit, 14 Gauge
ME14105 Wire seal kit, 8 Gauge
3012187 Retro kit, flexible manifold
3008666 QD, elbow, male w/o check valve
ME60048 Tube, 3/8”, green
OS1110103Connector, tube XMPT, 0.38 x 0.50
OS1162024QD, MPT x female, 3/8
OS1162025QD, straight, male w/o check valve
3024145 Wire lead,3 wire,14 GA,Franklin
3024156 Wire lead,14 GA,Grundfos,Modified
3024144 Wire lead,14 GA, 14 wire,Franklin
3024143 Wire,lead assy,8 GA,Franklin,w/bracket
3024175 Kit,wire lead,8 GA,Franklin,bracket
Note: The V&Z Series RO Machine has been discontinued. Service and Spare Parts are still available.
118
800-633-3080 / www.mcpur.com / Mar Cor Purification
Central Reverse Osmosis Systems
C om plete medical W ater systems
4400M RO System in Clinic Setting
Central Reverse Osmosis Systems
We provide a comprehensive line of medical device RO machines designed to meet your clinic’s needs for production output and monitoring
capabilities. We offer basic machines to more advanced systems all of which are compliant with today’s AAMI guidelines and CMS requirements.
• 4400HX RO System - 4,000 to 12,000 GPD
• 4400M RO System - 4,000 to 24,000 GPD
Hot water disinfection of RO & distribution loop
Basic controller, compact frame, large capacity
• CWP 100 RO System - 5,000 to 13,000 GPD
• 23G RO System - 3,000 to 16,500 GPD
Self contained design, hot water loop disinfection
Push button simplicity, digital readouts, service friendly
Typical System Components
System Features
• Mixing Valve to blend incoming hot and cold
• FDA 510(k) Complete Water Treatment System for Dialysis
water for reliable temperature production
• Booster Pump designed to provide consistent and adequate
water pressure to the RO machine
• Sediment, Softener and Carbon Adsorption Filters
• Optional Storage Tank provides continuous loop
•
operation & allows for reduced pretreatment & RO size
Validated 510(k) exchangeable Pyrogen Filtration units designed to remove bacteria and endotoxins
•
•
•
•
•
R e v erse
e r s e Osm
O s m o sis
s i s E q u i p ment
ment
CWP 100 RO System
that meets AAMI requirements
Thorough water analysis and system design
Complete turn-key installation by trained technicians
Final As-Built drawing and Operation Manual
Specific component, valve, pressure gauges, and test ports
identification
Full 24/7 service through 22 regional centers
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
119
Portable Reverse Osmosis Systems
M illeniu m hx
Portable Water Purification System with Automated Hot Water Disinfection
Mar Cor Purification offers the next generation portable RO unit, the Millenium HX. This compact automatic RO represents a quantum leap in reliable
water purification production with the added feature of automatic hot water disinfection. The Millenium HX is designed to meet AAMI grade water
standards according to ANSI/AAMI/ISO 13959 and is ideal for use in home and acute dialysis settings. The automated heat disinfect process allows for
greater bacteria control, reducing the need for chemicals, which leads to increased peace of mind and less downtime.
Standard Features
• Complete System Disinfection - Unit has the ability to disinfect the RO and
the product water supply tubing to the dialysis machine.
• Quiet Operation - Low noise level for regular and nocturnal treatments.
• Automated Disinfection - System can be programmed to complete a heat
cycle disinfection without attendant involvement
• Internet Connectable - Data logging of important events along with password
protected set-point & interactive troubleshooting screens.
• Safety - Programmable auto-flushing and continuous product loop
eliminates stagnation and ensures system cleanliness and readiness.
• User Friendly - Color touch screen LCD control panel offers display of
operational functions & key parameters.
• Isolated Disinfection - Unit can complete a hot water disinfection cycle
disconnected from water source, eliminating the possibility of a water leak
Optional Items
Reverse Osmosis Equipment
• Pretreatment Cart
• Water Softener
• Hardness & Total Chlorine Test Kits
• Carbon Block Filters or Tanks
• High & Low pH Cleaners
M I L L E N I U M H X S P E C I F I C AT I O N S
Model
MHX
Part Number
3025975 - 115 V, 50/60 Hz, 6 A
Nominal Product Flow Rate
1970 ml/min
Machine Recovery Rate
50% (maximum)
Dry Weight
70 lbs. (32 kg)
Power Range
115/230 V, 60/50Hz, 6/3 amps
Dimensions Vertical
Wide - 8.5” (21.6 cm)
3025790 - 230 V, 50/60 Hz, 3 A
Note: Initial product flow rate based on membrane manufacturer’s specifications of pretreated feed water, 100 psi (14 bars) applied pressure, 77°F (25°C)
incoming water temperature, 2,000 ppm (mg/L) NaCl, 15% recovery and 1 psi product pressure. Membrane flux may vary ± 10%. For MHX-750, 200 psi
(14 bars) applied pressure, 2,000 ppm (mg/L) NaCl, and 15% recovery.
O P E R AT I O N A L PA R A M E T E R S
pH
Operating: 5.5-10.5
Cleaning: 2-11
pH With Chloramines
Operating: 5.5-8.5
Cleaning: 2-11
Temperature
45-90°F (1.7-32°C)
Water Production Decreases Approximately 1.5% Per 1°F (3% Per 1°C) Incoming Water Temperature Drop.
Inlet Pressure (Dynamic)
Minimum: 30 psi (2 bars)
Inlet Water Flow
Minimum: 2 gpm (7.6 L/m)
Total Hardness
10 grains (pH dependent)
Silt Density Index (Sdi)
<5
Maximum: 75 psi (5.17 bars)
Note: Detailed analysis of the feed water will dictate the components, if any, needed in pre- or post-treatment of the Millenium HX RO unit. This will help
assure a constant supply of water, meeting AAMI Dialysis Water Quality Standards.
Specifications at 77°F (25°C).
All weights are approximate.
120
800-633-3080 / www.mcpur.com / Mar Cor Purification
Portable Reverse Osmosis Systems
milleni u m h x - S P A RE P A RT S
M I L L E N I U M H X S PA R E PA R T S
PART
NUMBER
M I L L E N I U M H X S PA R E PA R T S
PROCUCT
DESCRIPTION
PART
NUMBER
Electrical
Fittings
1243700
ME20114
ME21078
250-13-133
3025641
3025644
Fuse, 2.5 Amp, Slo Blow
Fuse, 3 Amp, Slo Blow
Fuse, 4 Amp, 250V, Time Delay
Fuse, 6 Amp, 250V, Time Delay
Fuse, 1Amp, 250V, FB, Ceramic
Fuse, 3 Amp, 250V, FB, Ceramic
3025643
Fuse, 5 Amp, 250V, FB, Ceramic
Fuse, 6 Amp, 250V, FB, Ceramic
Fuse, 10 Amp, 250V, ABC
Sensor, Conductivity, MHX, K=1
Thermostat, SS, 1/4" NPT, 195 CO
Heater, Cartridge, 1/2" NPT, 228F, 115VAC
Assy, Programmed PLC, I/O, SD, MHX
PCB, Conductivity, MHX
Cable, Cat5 Patch Cord, RJ45
PCB, Power Distribution And Junction, MHX
Power Relay, Omron, 24 VDC
Transformer, Toroid, 120/240 VAC
Sonalert, 24V, Panel Mount, Cont
Switch, Sealed Tilt, 50°-80°
Switch, Lever, SPPDT, 250 VAC, Door
Inlet Module, 2Pole, Line Filter
Fuse Drawer, 2Pole, Vltselect, 115/230, Med
Coupler, Elec, RJ45, Straight Thru
QD, Body, Panel Mount, 3/8" TB, Female, Red, Drain
QD, Body, Panel Mount, 3/8" TB, Female, Green, Feed
QD, Insert, Panel Mount, 1/4" SF, Male, Product
QD, Insert, Thread, 3/8" MNPT, No Shut-Off
OS1160393
QD, Body, Panel Mount, 3/8", Tb X Comp, Return
ME40561
374-20-109
Union, Bulkhead, TB X TB, ACL, 3/8" X 3/8"
Union, TB X TB, ACL, 3/8"
374-06-104
Connector, TB X MPT ACL, 3/8" X 3/8"
374-10-108
374-06-108
OS1164298
374-04-104
374-08-108
374-12-108
374-14-104
Connector, TB X FPT, ACL, 3/8" X 1/4"
Connector, TB X MPT, ACL, 3/8" X 1/4"
Elbow, 90, Union, ACL, 3/8" X 3/8"
Elbow, 90, TB X MPT, ACL, 3/8" X 3/8"
Elbow, 90, TB X FPT, ACL, 3/8" X 1/4"
Elbow, 90, TB X TB, 3/8" X 1/4"
Tee, Union, TB X TB X TB, ACL, 3/8"
Pumps
3025933
Pump/Motor, Fot, 115V, VFD
Membrane
3028365
Miscellaneous
3026761
3025865
3025866
3025950
3025951
3025955
OS1114311
1270003
ME41593
3027609
3027391
3027848
3025853
3025964
Assemblies
3025843
3025844
3025845
3025846
3027845
3027846
3025882
3028090
3028089
3025993
3025994
3025995
3028122
3025999
3026001
3027847
3028091
3028296
3027390
3027389
3024777
347-62-013
Assy, Valve Block 1, MHX
Assy, Valve Block 2, MHX
Assy, Valve Block 3, MHX
Assy, Valve Block 4, MHX
Assy, Valve Block 5, MHX
Assy, Valve Block 6, MHX
Assy, Valve Blocks 1-4, MHX
Assy, Psi Transducer, MHX
Assy, Float Level (LS1,LS2,LS3)
Assy, Solenoid Valve 1&4, MHX
Assy, Solenoid Valve 2, MHX
Assy, Solenoid Valve 3, MHX
Assy, Solenoid Valve 5, MHX
Assy, Manifold, Feed, MHX
Assy, Manifold, Waste, MHX
Assy, Tank, MHX
Assy, Vent Valve, MHX
Assy, Pressure Regulator, MHX
Element, MHX
Housing, 4X19, SS, MHX
End Cap, 4", MHX, Bottom
End Cap, 4", MHX, Top
O-Ring, 2-014, Viton, 60 Dur
O-Ring, 2-016, Viton, 60 Dur
O-Ring, 2-114, Viton, 60 Dur
O-Ring, 110, Viton, 70 Dur
O-Ring, 342, EPDM, Outer Plug
O-Ring, 3/4" OD
Plug, 1/4", Hex, SS, High Pressure
Fastner, SCHC, SS, 1/4-20 X 0.5
Washer, Quality Probe, VB5, MHX
Washer, Quality Probe, MHX
Bracket, Conductivity Probe, MHX
Reverse Osmosis Equipment
3025642
ME21094
3027823
3025877
3025839
3028351
3026013
3026962
3026014
250-07-354
3026760
3026803
3026015
3026011
3027106
1234347
3026454
PROCUCT
DESCRIPTION
Vavles
3026762
3026765
ME42047
Valve, Check, 316SS, 1/4" NPT X 1/4" NPT, 3#
Valve, Check, 316SS, 1/4" NPT X 1/4" NPT, 15#
Valve, Check, 3/8" SF
3026763
Valve, Check, 316SS, Cartridge, 25#
3026767
Valve, Check, 316SS, Cartridge, No Spring
Tubing
3027077
Tubing, Nylon, 3/8"
OS1110092
Tubing, Nylon, 1/4"
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
121
Portable Reverse Osmosis Systems
Wro 300 H
Portable Water Purification System with Automated Hot Water Disinfection
The WRO 300 H has been designed to overcome the problem of microbiological build up in portable dialysis reverse osmosis systems that may have
extended idle periods. By integrating an automated heat disinfection system into the unit, the WRO 300 H system is engineered and manufactured to
be clean by design. The WRO 300 H water purification RO unit is designed for single hemodialysis patient operation. It satisfies the stringent demands
of acute providers, while addressing the typical concerns of the home patient. This 510(k) device meets AAMI grade water standards according to ANSI/
AAMI/ISO 13959 with the added capability of efficiently disinfecting without the use of chemicals all in a validated format.
Standard Features
• Consistency – All of the standard features of the WRO 300
• Heat Disinfection – User initiated or automatic start of heat disinfection cycle
• Ease of Use – portable, compact and easy to operate for caregivers
• Quiet Operation – Low noise level for regular and nocturnal treatments
• Safety – Programmable auto-flushing and continuous product loop eliminates
stagnation and ensures system cleanliness
• Certified – Listed as certified by CSA to Canadian and US Medical Standard (UL
60601-1)
User Interface Displays
R e v erse Osm o sis E q u i p ment
• Alarm Messages
• Feed & Product Water Conductivity
• Ionic Rejection Rate
• Product Water Temperature
• Date & Time
• Total Run Time
• Service Reminder
• Days Since Last Cleaning & Disinfection
W R O 3 0 0 H S pecifications
Part Number
107365
Feed Water Supply
Input
0.8 gpm (3.0 l/min) required
Pressure
20 to 45 psi (0.15 to 0.3 mPa)*
Temperature
41 to 86°F (5 to 30°C)
Quality
Potable water shall be used. Softener followed by carbon/particle filter ensures optimum performance.
Product Water
Output
Minimum 0.3 gpm (1.1 l/min) at 50°F (10°C) and 22 psi (0.15 mPa) outlet pressure
Drain Requirements
Operation
0.32 ± 0.03 gpm (1.2 ± 0.1 l/min)
Peak Flow (Rinse)
0.8 gpm (3.0 l/min)
Reverse Osmosis Membrane
Material
Polyamide, thin film composite
Configuration
Spiral wound
pH-Tolerance
2–11
Disinfection & Cleaning
Heat Disinfection
User initiated or automatic start of heat disinfection
Chemical Disinfection
Automatic dilution of disinfectant. Rinse memory forcing the rinse program to start after chemical disinfection.
Cleaning
Customized programs for different customer needs
Power Supply
Main Voltage
100, 115 or 220-240 V +/-10%, 50 or 60 Hz
Power
100V: max 1500 W, 115V: max 1380 W, 220-240V: max 1850W
W R O 3 0 0 H D imensions
Depth - Max
20.5 inches (520mm)
Depth - Footprint
15.0 inches (380mm)
Width - Max
8.1 inches (205mm)
Width - Footprint
7.3 inches (185mm)
Height
22.2 inches (563mm)
Weight
72.75 lbs (33kg)
Specifications at 77°F (25°C).
All weights are approximate.
*Pressure greater than 45 PSI (0.3 mPa) requires the use of pressure regulator.
122
800-633-3080 / www.mcpur.com / Mar Cor Purification
Portable Reverse Osmosis Systems
Wr o 3 0 0 H s pare p arts
W R O 3 0 0 H S PA R E PA R T S
PART
NUMBER
W R O 3 0 0 H S PA R E PA R T S
PROCUCT
DESCRIPTION
PART
NUMBER
Electrical
Fittings
3028194
CPU SW 4.3 and Lower, WRO 300/H
WTW900000119
WTW506015002
User Interface, SW 4.3, WRO 300/H
WT100319023
WTW505001002
Cable, CPU PCB to Display, SW 4.3, WRO 300/H
3028309
PROCUCT
DESCRIPTION
WTW900000052
Collet, WRO 300/H
O-Ring, 5.1 X 1.6, WRO 300/H
O-Ring, 7.11 X 2.87, WRO 300/H
Power Supply Unit, WRO 300/H
WT100319039
O-Ring, 5.3 X 2.4, WRO 300/H
WTW505002001
Cable, Harness, WRO 300/H
WT100319020
O-Ring, 10.1 X 1.6, WRO 300/H
WTW505004001
Cable, CPU PCB to Fan, WRO 300/H
WT100319022
O-Ring, 4.3 X 2.4, WRO 300/H
WT109133
Power Cord, WRO 300/H
ME20165
Fuse, 15A Slow, WRO 300 H
WT100319033
O-Ring, 13.3 X 2.4, WRO 300/H
WT100318085
O-Ring, 107.32 X 5.34, WRO 300/H
WT100318084
O-Ring, 10.5 X 1.6, WRO 300/H
WTW502005002
AC Board, WRO 300 H
WTW505011001
Cable, CPU PCB to AC PCB, WRO 300 H
WTW505012001
Cable, AC PCB to Flow Switch, WRO 300 H
Membrane
3028033
RO Module, Complete, WRO 300 H
Pump / Motor
3028161
WT100335001
O-Ring, 7.1 X 1.6, WRO 300/H
O-Ring, 5/16", WRO 300/H
WTW507003001
Connector, Male, Straight, MXTU, WRO 300/H
WTW507013001
Connector, Angled, Silicone, WRO 300/H
WTW100111001
Connector, Male,T1/1 P5/16, WRO 300/H
Connector, Male, Elbow, TUXTU, WRO 300/H
Pump, WRO 300/H
WTW507001001
WTW510001001
Motor, WRO 300/H
WTK12961001
Tee, Connector, Silicone, WRO 300/H
WT100335002
Locking Ring, 5/16", WRO 300/H
Sensors
WTW508002001
Conductivity Cell, WRO 300/H
WTW516004001
Temperature Sensor, WRO 300/H
WTW508013002
Level Switch, Float, Mech, WRO 300/H
WTW515006002
Flow Indicator, WRO 300 H
WTW516005001
Flow Meter, WRO 300 H
WTW508011001
Flow Heater, Reject, WRO 300 H
WTW508012001
Flow Heater, Product, WRO 300 H
Flow Block
3028251
Flow Block, Complete, WRO 300/H
Tubing / Hose
WT300HOSE
Hose Assy, WRO 300/H
WTW900000261
Hose, Silicone, DI5XT3MM, WRO 300/H
WTW506003001
PEX Kit for RO Module, WRO 300/H
Chemical Pump
WTW515002002
Chemical Intake, Complete, WRO 300/H
WTW513001002
Chemical Pump, 24VAC, WRO 300/H
WTW516001001
Cable, Optical Sensor, Chem, WRO 300/H
WTW518001001
Disinfect Tube, WRO 300/H
Tools
WTK12755001
WT100TEST
3027493
WTW507024001
WT300CAD
WT300PSITEST
Tool, Connector, WRO 300/H
Tool, Product/Flow Calibration, WRO 300/H
Tool, Pressure/Flow Adjust, WRO 300/H
QD, Connector For PSI Gauge, WRO 300/H
Tool, CAD Device, WRO 300/H
WTW507021002
QD, Coupling, 1/4" Male, 1/8" PEX, WRO 300/H
WTW507006001
Coupling, 14mm, WRO 300/H
WTW200304001
Nipple Angled, 5/16, WRO 300/H
WTW512001001
Plug, 19mm, WRO 300/H
WTW512002001
Plug, 30mm, WRO 300/H
WTW200148001
Plug, 5/16", WRO 300/H
Valves
WTW508010001
Valve, Needle, Screw, WRO 300/H
WTW509001001
Valve Membrane, WRO 300/H
WTW508004001
Valve, Magnet, 2-Way, WRO 300/H
WTW508005001
Valve, Magnet, 3-Way, WRO 300/H
Miscellaneous
WTW503002001
Overlay, WRO 300 H
WTW501002001
Cover, Detachable, WRO 300/H
WTW900000109
Screw, 1/4 Turn, For Cover, WRO 300/H
WTW508003002
Fan, Complete, WRO 300/H
WTW515004002
Tank, Complete, WRO 300/H
WTW900000797
Connector, Female For Y, WRO 300/H
WTW507022001
Connector, Y, WRO 300/H
WTW900001062
O-Ring, Y Connector, WRO 300/H
WTW506008001
Filter Kit Air Power Supply, WRO 300/H
R e v erse Osm o sis E q u i p ment
WTW513002002
Note: WRO 300/H indicates the part is applicable for either the WRO
300 or WRO 300 H
Test, Fixture, Gauge, 300 PSI, WRO 300/H
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
123
Portable Reverse Osmosis Systems
Wr o 3 0 0
Portable Water Purification System
The WRO 300 water purification unit is designed to be used as a single patient unit in conjunction with a single dialysis machine. The WRO 300 is
designed to meet the AAMI grade water standards according to ANSI/AAMI/ISO 13959:2009 and is ideal for use in home or acute dialysis settings.
Standard Features
• Portable, compact and easy to operate with a very low noise level
• Additional automated procedures and internal diagnostic minimize home patients and
caregiver involvement
• Programmable automated flushing and continuous product water loop eliminate
stagnation and ensures system cleanliness
• Continuous product water loop minimizes water volume requirements for purified water
production
• Automated processes ensure consistency with disinfection procedures
• End-to-end disinfection with dialysis machines
User Interface Displays
R e v erse
e r s e Osm
O s m o sis
sis Equipm
ment
ent
• Alarm Messages
• Feed & Product Water Conductivity
• Ionic Rejection Rate
• Product Water Temperature
• Date & Time
• Total Run Time
• Service Reminder
• Days Since Last Cleaning & Disinfection
W R O 3 0 0 S pecifications
Part Number
107364
Feed Water Supply
Input
0.8 gpm (3.0 l/min) required
Pressure
20 to 45 psi (0.15 to 0.3 mPa)*
Temperature
41 to 86°F (5 to 30°C)
Quality
Potable water shall be used. Softener followed by carbon/particle filter ensures optimum performance.
Product Water
Output
Minimum 0.3 gpm (1.1 l/min) at 50°F (10°C) and 22 psi (0.15 mPa) outlet pressure
Drain Requirements
Operation
0.32 ± 0.03 gpm (1.2 ± 0.1 l/min)
Peak Flow (Rinse)
0.8 gpm (3.0 l/min)
Reverse Osmosis Membrane
Material
Polyamide, thin film composite
Configuration
Spiral wound
pH-Tolerance
2–11
Disinfection & Cleaning
Chemical Disinfection
Automatic dilution of disinfectant. Rinse memory forcing the rinse program to start after chemical disinfection.
Cleaning
Customized programs for different customer needs
Power Supply
Main Voltage
100V, 60 Hz
Power
115V, Hospital grade earthed, type IEC 60 083
W R O 3 0 0 D imensions
Depth - Max
20.5 inches (520mm)
Depth - Footprint
15.0 inches (380mm)
Width - Max
8.1 inches (205mm)
Width - Footprint
7.3 inches (185mm)
Height
22.2 inches (563mm)
Weight
63.9 lbs (29kg)
Specifications at 77°F (25°C).
All weights are approximate.
*Pressure greater than 45 PSI (0.3 mPa) requires the use of pressure regulator.
124
800-633-3080 / www.mcpur.com / Mar Cor Purification
Portable Reverse Osmosis Systems
W r o 3 0 0 s pare p arts
W R O 3 0 0 S PA R E PA R T S
PART
NUMBER
W R O 3 0 0 S PA R E PA R T S
PROCUCT
DESCRIPTION
PART
NUMBER
Electrical
3028194
PROCUCT
DESCRIPTION
Fittings
CPU SW 4.3 and Lower, WRO 300/H
WTW900000119
WT100319023
Collet, WRO 300/H
O-Ring, 5.1 X 1.6, WRO 300/H
WTW506015001
User Interface, SW 4.2, WRO 300
WTW506015002
User Interface, SW 4.3, WRO 300/H
WTW505001001
Cable, CPU PCB to Display PCB, SW 4.2 WRO 300
WT100319039
O-Ring, 5.3 X 2.4, WRO 300/H
WTW505001002
Cable, CPU PCB to Display, SW 4.3, WRO 300/H
WT100319020
O-Ring, 10.1 X 1.6, WRO 300/H
WTW516002001
Level Sensor, WRO 300
WT100319022
O-Ring, 4.3 X 2.4, WRO 300/H
Power Supply Unit, WRO 300/H
WT100319033
O-Ring, 13.3 X 2.4, WRO 300/H
WTW505003001
Cable, CPU PCB to E Com, WRO 300
WT100318085
O-Ring, 107.32 X 5.34, WRO 300/H
WTW505002001
Cable, Harness, WRO 300/H
WT100318084
O-Ring, 10.5 X 1.6, WRO 300/H
WTW505004001
Cable, CPU PCB to Fan, WRO 300/H
3028309
WT109133
Power Cord, WRO 300/H
Membrane
WTW900000052
3028161
WT100335001
O-Ring, 7.11 X 2.87, WRO 300/H
O-Ring, 7.1 X 1.6, WRO 300/H
O-Ring, 5/16", WRO 300/H
WTW507003001
Connector, Male, Straight, MXTU, WRO 300/H
RO Module, Complete, WRO 300
WTW507013001
Connector, Angled, Silicone, WRO 300/H
WTK10640001
Membrane, Kit, WRO 300
WTW100111001
Connector, Male,T1/1 P5/16, WRO 300/H
WTK12215001
Tool, Withdrawing, Membrane, WRO 300
WTW507001001
Connector, Male, Elbow, TUXTU, WRO 300/H
WTW515008002
WTW513002002
Pump, WRO 300/H
WTW510001001
Motor, WRO 300/H
Sensors
WTW508002001
Conductivity Cell, WRO 300/H
WTW516004001
Temperature Sensor, WRO 300/H
WTW508013002
Level Switch, Float, Mech, WRO 300/H
Flow Block
3028251
Flow Block, Complete, WRO 300/H
Tubing / Hose
WT300HOSE
Hose Assy, WRO 300/H
WTW900000261
Hose, Silicone, DI5XT3MM, WRO 300/H
WTW506003001
PEX Kit for RO Module, WRO 300/H
Chemical Pump
WTW515002002
Chemical Intake, Complete, WRO 300/H
WTK12961001
Tee, Connector, Silicone, WRO 300/H
WT100335002
Locking Ring, 5/16", WRO 300/H
WTW507021002
QD, Coupling, 1/4" Male, 1/8" PEX, WRO 300/H
WTW507006001
Coupling, 14mm, WRO 300/H
WTW200304001
Nipple Angled, 5/16, WRO 300/H
WTW512001001
Plug, 19mm, WRO 300/H
WTW512002001
Plug, 30mm, WRO 300/H
WTW200148001
Plug, 5/16", WRO 300/H
Valves
WTW508010001
Valve, Needle, Screw, WRO 300/H
WTW509001001
Valve Membrane, WRO 300/H
WTW508004001
Valve, Magnet, 2-Way, WRO 300/H
WTW508005001
Valve, Magnet, 3-Way, WRO 300/H
Miscellaneous
WTW503001001
Overlay, WRO 300
WTW501002001
Cover, Detachable, WRO 300/H
WTW513001002
Chemical Pump, 24VAC, WRO 300/H
WTW516001001
Cable, Optical Sensor, Chem, WRO 300/H
WTW900000109
Screw, 1/4 Turn, For Cover, WRO 300/H
WTW518001001
Disinfect Tube, WRO 300/H
WTW508003002
Fan, Complete, WRO 300/H
WTW515004002
Tank, Complete, WRO 300/H
Tool, Connector, WRO 300/H
WTW900000797
Connector, Female For Y, WRO 300/H
WTW507022001
Connector, Y, WRO 300/H
WTW900001062
O-Ring, Y Connector, WRO 300/H
WTW506008001
Filter Kit Air Power Supply, WRO 300/H
Tools
WTK12755001
WT100TEST
3027493
WTW507024001
WT300CAD
WT300PSITEST
Tool, Product/Flow Calibration, WRO 300/H
Tool, Pressure/Flow Adjust, WRO 300/H
QD, Connector For PSI Gauge, WRO 300/H
R e v erse
e r s e Osm
O s m o sis
s i s E q u i p ment
ment
Pump / Motor
Tool, CAD Device, WRO 300/H
Test, Fixture, Gauge, 300 PSI, WRO 300/H
Note: WRO 300/H indicates the part is applicable for either the WRO
300 or WRO 300 H
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
125
Portable Reverse Osmosis Systems
7 0 0 S eries
650 to 2,600 ml/min
The 700 Series Portable RO Systems are designed to produce from 20.8 to 32.7 GPH of pure water. Specially designed for quiet
operation. The 700 includes caster wheels for easy relocation and has room for pretreatment equipment on the back. Advanced
performance monitoring includes percent rejection and a digital display of product water total dissolved solids (TDS) as mg/L. For added
safety, an audible alarm with adjustable set points is incorporated into the TDS monitor. The monitoring and instrumentation meets the
standards recommended by the Association for the Advancement of Medical Instrumentation (AAMI).
Standard Features
R e v erse Osm o sis E q u i p ment
• Panel-mounted pressure gauges continuously display important prefilter, pump,
and product pressures.
• Space-efficient design for easy portability.
• Chemically compatible with 1% Minncare® Cold Sterilant disinfectant solution.
• Stainless steel RO pump and pressure vessels are used for maximum strength,
reliability, and longevity.
• Thin film RO membranes for high quality & long life.
• Incoming water solenoid allows for easy changing of the pre-filter element and
system cleaning/disinfecting without disconnecting the incoming water supply.
• Product water recirculation returns the excess product water into the feed
stream, which reduces stress on the RO membranes, conserves water, inhibits
bacterial growth, and lowers operating costs.
• Easy to expand design allows for additional membranes to be added,
increasing the capacity up to 2600 ml/min at 77°F (25°C), making it possible
to operate more than one dialysis machine from the 700 Series RO (see
operating parameters).
• FDA registered manufacturer meets stringent medical device requirements.
• Listed as certified by CSA to Canadian and U.S. medical electrical standards.
The 700 Series RO has been tested to and demonstrates compliance with
CAN/CSA C22.2 No. 601.1-M90 (Safety of Medical Electrical Equipment, Part
I; General Requirements for Safety) and UL STD 2601-1 (Safety of Medical
Electrical Equipment Part I; General Requirements for Safety).
Operating Parameters
Operating Pressure: 200 psig (1379 KPA)
Maximum Recovery: 17% - 45%
Nominal Rejection: 95-98%
Operating Temperature: 35-90°F (2-32°C)
Minimum Inlet Pressure: 30 psig (210 KPA)
Design Temperature: 77°F (25°C)
Electrical Req: 115/230 V, 60/50 Hz, 8/5 amps
Optional Fetures
Water Softeners
Replacement Prefilters
Pretreatment Cart
AAMI Water Analysis
Disinfectant Tank
Hardness & Total Chlorine Test Kits
Carbon Tanks
Sediment Filters
High and Low pH Cleaners
7 0 0 S eries R O
ProductPRODUCTIONPermeate
Description
(GPM / LPM)
(GPD/ LPD)
700 Series RO, 60HZ, Short Cabinet
RO,S-701,TF,60H,SH,WH
R
O,S-702,TF,60H,SH,WH
RO,S-703,TF,60H,SH,WH
RO,S-704,TF,60H,SH,WH
700 Series RO, 60HZ, Tall Cabinet
RO,S-701,TF,60H,TL,WH
RO,S-702,TF,60H,TL,WH
RO,S-703,TF,60H,TL,WH
RO,S-704,TF,60H,TL,WH
RO,S-704,TF,60H,TL,WH,COLD
700 Series RO, 50HZ, Short Cabinet
RO,S-701,TF,50H,SH,WH
RO,S-702,TF,50H,SH,WH
RO,S-703,TF,50H,SH,WH
R
O,S-704,TF,50H,SH,WH
RecoveryDimensions
Rate
W x D x H (IN.)
.17 / .64
.34 / 1.31
.52 / 1.97
.69 / 2.62
250 / 921
500 / 1,892
750 / 2,838
1000 / 3785
17%
29%
38%
45%
18 x 14 x 26
18 x 14 x 26
18 x 14 x 26
18 x 14 x 26
60
70
80
90
.17 / .64
.34 / 1.31
.52 / 1.97
.69 / 2.62
.54 / 2.06
250 / 921
500 / 1,892
750 / 2,838
1000 / 3785
784 / 2,966
17%
29%
38%
45%
45%
18 x 14 x 41
18 x 14 x 41
18 x 14 x 41
18 x 14 x 41
18 x 14 x 41
60
70
80
90
95
.17 / .64
34 / 1.31
.52 / 1.97
69 / 2.62
250 / 921
500 / 1,892
750 / 2,838
1000 / 3785
17%
29%
38%
45%
18 x 14 x 26
18 x 14 x 26
18 x 14 x 26
18 x 14 x 26
60
70
80
90
Specifications at 77°F (25°C) execpt of the COLD model which is rated at 50°F (10°C).
All dimensions are approximate.
Feed water requirements and other specifications are available upon request.
126
Weight
(LBS.)
800-633-3080 / www.mcpur.com / Mar Cor Purification
Portable Reverse Osmosis Systems
7 0 0 S eries
7 0 0 S eries R O
SPARE PARTS
Part Product
NumberDescription
Part Product
NumberDescription
Miscellaneous
ME40513 Disinfect port, QD (female)
ME40603 Disinfect port, QD (male)
ME40605 GHT, feed water line fitting
ME40604 GHT, product water line fitting
ME40694 O-ring, pre-filter (9-7/8”)
1235049 Regulator, new style
ME30335Alarm set switch knob
ME41611 Shim, Shaft, Knob
3027542 CIP Tank Kit
Fittings
ME40725 Pump 3/8” x 3/8” SF straight
ME40569 Elbow,3/8” SF x 1/4” MNPT
ME40570 Elbow,1/4” SF x 1/4” MNPT
ME40563 ROMA 1/4” SF tee
ME40566 ROMA 1/4” x 1/4” tube adaptor
ME40254 Small tube 1/8” x 1/8” JACO straight
ME40218 Small tube 1/8” x 1/8” JACO elbow
Tubing
ME60370 Hose,3.8” ID x 5/8” OD, braided
ME60372 Hose,3/8” ID, clear vinyl
ME60280 3/8” Tube Clamp
Mar Cor Puri f i cati on / www.mcpur.com /
R e v erse Osm o sis E q u i p ment
Electrical
1236062 Fuse, 1/4 amp, SLO BLO (120V 60Hz)
1234685 Fuse, 8 amp, SLO BLO (120V 60Hz)
1234687 Fuse, 1/8 amp, 50 HZ only
ME20290 Fuse, 5 amp, SLO BLO (220V 50Hz)
ME12310 PCB assy, % rejection
1263879 PCB assy, conductivity
ME12312 PCB assy, display
ME30382 Power cord, Hospital Grade
1234676 Power supply (110/120V 60Hz)
1234675 Power supply (220V 50Hz)
ME12131 Sensor probe
ME20203 Switch, inlet water valve
1236035 Switch, On/Off
ME14516 Switch, Alarm Set
1229974 Switch, Disinfect, Red, 60Hz
1234355 Switch, Disinfect, Red, 50Hz
1229976 Switch guard
Filters & Filter Housings
ME40695 Filter, 1 micron, 9-7/8”, 40/Case
ME40696 Filter, 5 micron, 9-7/8”, 40/Case
ME40698 Filter, carbon, 9-7/8”
ME12610 Pre-filter housing assembly
Gauges
3002200 Gauge, 100 PSI, Back Mount
3002201Gauge, Product Pressure
3002169 Gauge, Pump Pressure
Membranes
ME12079 Membrane housing assembly CA tall, ROMA
3019663 ROMA,SS,PA,250 GPD,Flared HSNG
ME40179A Membrane only, 2-1/2”, with sleeve, PA (pre July 2006)
ME40091A Membrane only, 2-1/2” x 21”, with sleeve, CA
ME40510A Membrane only, 2.6” x 25”, CGE, DS
ME12289 Upgrade Kit, 1 Housing (pre July 2006)
ME12290 Upgrade Kit, 2 Housings (pre July 2006)
OS1206719 Membrane only, 2 ½”, tape (post July 2006)
Motor/Pump
3002168 Motor, 1/3HP, 110/230V, 50/60Hz
3007544 Pump, 100 GPH, SS w/regulator
Valves
1228224 Check valve, product return
ME40740 Check valve
ME40574 Valve, feed water solenoid (110/120V 60Hz)
ME40739 Valve, feed water solenoid (220V 50Hz)
ME40316 Valve, operate/flush, product
7 0 0 S eries R O
SPARE PARTS continued
800-633-3080
127
Portable Reverse Osmosis Systems
2 2 0 0 p o rtable RO
2,200 gallons per day
The Biolab 2200 Portable RO Systems are designed to produce up to 1.52 USgpm of pure water.
The 2200 provides high quality product water, user-friendly controls, durable construction, and easy installation. This
series of RO machines is primarily designed for hemodialysis central acute programs. It is designed to support one dialysis machine or as many as six dialysis machines. The machine is licensed with Health Canada and the USFDA 510(k) as
medical devices. Our quality management system is registered to ISO 13485:2003.
Typical Medical Applications
Hemodialysis central acute programs
Clean sterilize reuse (CSR)
Sterile processing department (SPD)
Central laboratory
Central Acute RO Machine Benefits
Reverse Osmosis Equipment
• Digital water quality meter (LCD screen) displays product and incoming
water quality, percent rejection, and activates audible and visual alarms.
• Standard permeate divert function on the RO.
• Adjustable permeate water recirculation for “fine tuning”
output flows.
• Panel-mount pressure gauges and flow meters on every machine.
• Stainless steel RO pump for long-lasting, quiet operation, including
a soft start feature.
• Swivel locking casters that provide easy movement.
• Ability to configure a complete system in either in direct-feed or storagetank mode of operation.
• Pretreatment lock-out and remote alarm interphase options.
• Availability of installation kits for quick and easy connections.
Operating Parameters
Operating Pressure: 200 psig
Maximum Recovery: 75%
Nominal Rejection: 95-99%
Operating Temperature: 40-90°F (4-32°C)
Minimum Inlet Pressure: 20-60 psig
Design Temperature: 77°F (25°C)
Electrical Requirements: 115V, 1 Phase, 60 Hz
Specifications
Product Flow: 1.5 GPM
Water Flow: 1.5 GPM
Motor HP: 0.75
Number of Elements: 2
Connections: 3/4” GHT
Weight: 207 lbs
Specifications at 77°F (25°C).
All weights are approximate.
Feed water requirements and other specifications are available upon request.
128
800-633-3080 / www.mcpur.com / Mar Cor Purification
Portable Reverse Osmosis Systems
2 2 0 0 p o rtable RO
2200 RO SPARE PARTS
2200 RO SPARE PARTS continued
Part Product
NumberDescription
PartProduct
NumberDescription
Prefilter
285-05-121
275-20-016
ME60392
Valves
425-32-446
425-06-810
425-09-421
Membrane & Housing
474-04-618 Membrane, 4x21, TFC, LP
486-40-308 Housing, 4x21, VSH style with end caps
3025847End Cap, black, clamp kit
486-13-106 Gasket, U-packing, VSH style
486-40-148 O-ring, small, VSH style
Electrical
250-19-164 Digital Controller, RO
250-19-176 Conductivity Sensor
250-13-130 Fuse, 4 amp
250-13-132 Fuse, 5 amp
250-13-541 Fuse, 20 amp
Pump/Motor
030-05-107 Pump, SS
055-12-818 Motor, 3/4 HP, TEFC, 115/1/60
030-55-003 Coupling, L-Joy
10” Filter Housing, 3/4”I/O, Tapped
Filter, 2.5” X 9-7/8” 1-Micron (40 per case)
Wrench, Filter Housing 3/4”
Solenoid Valve, 1/2”, Brass (inlet)
Ball Valve, 3/8”MPT x 3/8”FPT (CIP)
Needle Valve, 1/4” SS (concentrate, recycle)
Reverse Osmosis Equipment
425-39-624 Check Valve, 1/4”, PVC
425-29-142 Solenoid Valve, 3/8”, Plastic
OS1113930 Pressure Relief Valve, 1/4”
Flows & Pressures
300-15-323 0-100 PSI Gauge, SS
300-15-377 0-300 PSI Gauge, SS
303-34-580 Pressure Switch, 1/4”, Brass
310-21-105 Flow Meter, 0.2-2.0 GPM, 1/4”FNPT
Flow Block & Connectors
400-01-420 Inlet Block, PVC, 1/2”
410-01-418 Product Block Header, PolyPro
375-09-010 Elbow, 1/2” TB x 3/4” MNPT, F&T
375-09-006 Elbow, 3/8” TB x 1/2” MNPT, F&T
374-12-111 Elbow Union 1/2” TB x 1/2” TB
374-04-103 Elbow 1/4” TB x 1/4” MPT
374-04-104 Elbow 3/8” TB x 3/8” MPT
374-04-108 Elbow 3/8” TB x 1/4” MPT
374-08-103 Elbow 1/4” TB x 1/4” FPT
374-08-108 Elbow 3/8” TB x 1/4” FPT
374-06-108 Connector 3/8” TB x 1/4” MPT
374-14-104 Tee Union 3/8” TB
374-14-113 Tee Union 1/2” TB
374-20-112 Union 1/2” TB x 3/8” TB
374-22-104 Tube Stem Adapt 3/8” TB X 1/4” MPT
374-22-108 Tube Stem Adapt 1/2” TB x 1/2” MPT
374-26-102 Tube Cap, 3/8”
374-32-110 Tube Elbow Union 1/4” TB x 3/8” STM
374-30-110 Tube Reducer 1/4” TB x 3/8”STM
374-44-204 Locking Clip, 1/4”, Red
374-44-105 Locking Clip, 1/2”, Black
365-14-002 Tubing, PE, 1/4”, Black
365-38-002 Tubing, PE, 3/8”, Black
365-12-052 Tubing, PE, 1/2”, Black
350-11-002 Male Adapter, 3/8” MPT x MGHT, Dixon
350-11-003 Male Adapter, 1/2” MPT x MGHT, Dixon
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
129
Portable Reverse Osmosis Systems
M illeniu m™ S eries
M I L L E N I U M S eries R O
SPARE PARTS
Part Product
NumberDescription
Reverse Osmosis Equipment
130
Electrical
ME35329
ME35328
ME20290
1236062
1234687
1234685
1234347
1234563
ME35330
ME12310
1263879
ME12312
1236173
ME30382
1234349
1236543
1234676
1234675
1234350
1232381
ME12131
1229978
ME20203
1229976
1229974
1234355
1229950
1235157
1231491
1229977
1235679
Fittings
ME40569
ME40570
ME40742
ME41566
ME40976
ME40672
ME40605
ME40604
ME40564
ME40568
1235519
3027571
ME42046
ME42051
ME42085
ME42080
ME42081
ME42084
ME42082
ME42096
ME41083
Fan and Motor, cooling, 110VAC, 60Hz
Fan and Motor, cooling, 220VAC, 50Hz
Fuse, 5 amp, SLO BLO (220V 50Hz)
Fuse, 1/4 amp, SLO BLO (120V 60Hz)
Fuse, 1/8 amp, 50Hz only
Fuse, 8 amp, SLO BLO (120V 60Hz)
Fuse Drawer, 50/60Hz
Low Feed Pressure LED
Power cord for cooling fan
PCB assy, % rejection
PCB assy, conductivity
PCB assy, display
Plug End (50Hz only, use with P/N ME30382)
Power cord, Hospital Grade (50Hz only)
Power cord retainer (60Hz only)
Power cord retainer (50Hz only)
Power supply (120V 60Hz)
Power supply (220V 50Hz)
Inlet power module
GFI Power cord (60Hz only)
Sensor probe
Relay, 24VAC Coil
Switch, inlet water valve, RO pump power
Switch Guard
Switch, Disinfect, Red, 60Hz
Switch, Disinfect, Red, 50Hz
Pressure Switch
Sonalert
Terminal butt splice, no crimp
Timer capsule
Cable Assembly, LV panel components
Elbow, 3/8” SF x 1/4” MNPT
Elbow, 1/4” SF x 1/4” MNPT
Elbow, 1/4” SF x 1/4” stem
Elbow, 1/4” SF x 3/8” stem
Straight, 1/4” SF x 1/4” MNPT
Barb Adapter, 3/8” tube end x 3/8” hose
GHT, feed water line fitting
GHT, product water line fitting
Elbow,3/8” SF x 3/8” tube end adap.
Elbow,3/8” SF x MNPT
Fitting, 2 way divider, 3/8” SF
Kit, Retro, Product QD, Female
Product Port, QD(Female),1/4” SF
QD(Male) for hoses, elbow, 3/8” Barb
QD, Disinfect Port, Yellow
QD, Feed Port, Green
QD, Waste Port, Red
QD, Male, Disinfect Hose, Yellow
QD, Male, Feed Hose, Green
QD, Male, Waste Hose, Red
Straight, 3/8” sf x 1/4” FNPT
800-633-3080 / www.mcpur.com / Mar Cor Purification
M I L L E N I U M S eries R O
SPARE PARTS continued
Part Product
NumberDescription
Gauges
ME40741 Gauge, 100 PSI, bottom mount
ME42048Gauge, product pressure
ME42074Gauge, pump pressure
Hose / Tubing
ME41555 Hose clamp, SS, 5/8”
ME60021 Tube, PE, 1/4”, green
ME60031 Tube, PP, 1/4”, natural
ME60032 Tube, PP, 3/8”, natural
ME60370 Hose, 3/8” ID x 5/8” OD, braided
ME60372 Hose, 3/8” ID, clear vinyl
Membranes
OS1228070 Membrane, 2.4” x 21”, cage wrapped, TF
Motor / Pump
3002168 Motor, 1/3HP, 110/230V, 50/60Hz
3007544 Pump, 100 GPH, SS w/regulator
Pre-Filters & Filter Housings
ME40695 Filter, 1 micron, 9-7/8”, 40/case
ME40696 Filter, 5 micron, 9-7/8”, 40/case
ME40698 Filter, carbon, 9-7/8”
ME14779 Pre-filter assembly kit, M-1 kit
ME12128 Pre-filter housing assembly
Valves
ME42047 Check valve
1228224 Check valve, product return
ME40574 Valve, feed water solenoid, (120V 60Hz)
ME40739 Valve, feed water solenoid, (220V 50Hz)
ME42014 Valve, operate/flush, product
Miscellaneous
ME40694 O-ring, pre-filter (9-7/8”)
OS1151580 O-ring, EPDM 116
OS1151581 O-ring, ROMA endcap, large
1234489 Regulator, product pressure adjustment
1235113 Product pressure adjustment retrofit kit
OS1203174 Shield, Drip, Procon Pump
ME60746 Motor mount
ME30335 Knob, TDS switch
ME41611 Knob bushing, TDS switch
OS1151419 Half clamp for ROMA
OS1160368 Endcap, side port
ME14924 prefilter install kit (mounts prefilter to RO or to wall – includes all necessary parts)
3027542 CIP Tank Kit
Portable Reverse Osmosis Systems
F - 8 0 1 Series
F - 8 0 1 S eries R O
SPARE PARTS
Part Product
NumberDescription
Electrical
1234685 Fuse, 8 amp, SLO BLO (120V 60Hz)
ME12310 PCB assy, % rejection
1263879 PCB assy, conductivity
ME12312 PCB assy, display
ME30382 Power cord, Hospital Grade
1234676 Power supply (110/120V 60Hz)
ME12131 Sensor probe
1236035 Switch, On/Off
ME12324 Switch, Alarm Set
1236062 Fuse, ¼ amp, SLO BLO (120V 60 HZ)
Filters & Filter Housings
ME40695 Filter, 1 micron, 9-7/8”, 40/Case
ME40696 Filter, 5 micron, 9-7/8”, 40/Case
ME40698 Filter, carbon, 9-7/8”
ME12128 Pre-Filter housing assembly
ME40694 O-ring, pre-filter (9 7/8”)
Fittings
ME40725 Pump 3/8” x 3/8” SF straight
ME40569 Elbow, 3/8” SF x 1/4” MNPT
ME40570 Elbow, 1/4” SF x 1/4” MNPT
ME40563 ROMA 1/4“ SF tee
ME40566 ROMA, 1/4“ x 1/4“ tube adapter
ME40254 Small tube 1/8” x 1/8” JACO straight
ME40218 Small tube 1/8” x 1/8” JACO elbow
ME40677 Fitting, 1/4” tube, panel bulkhead
ME40561 Union,bulkhead,3/8” SF
ME12734 QD, female, green, 3/8” hose x 1/4” with valve
ME12733 QD, female, red, 3/8” hose x 1/4” with valve
ME40762 QD, female, white, 3/8” hose x 1/4” without valve
ME40716 QD, female, white, 3/8” hose x 1/4” without valve, panel
ME12613 QD, male, green, 1/4” NPT x 1/4” without valve
ME12886 QD, male, green, 3/8” NPT x 1/4” with valve
ME12612 QD, male, red, 1/4” NPT x 1/4” without valve
ME12731 QD, male, red, 3/8” hose x 1/4” with valve
ME40717 QD, male, white, 1/4” NPT x 1/4” without valve
Hose Assemblies
ME12388 Feed to F-801
ME12393 Product Flush
ME12205 Product Output
ME12208 ROMA Inlet
ME12374 ROMA Waste
ME13064 Kit, lower chassis tube
Membranes
ME40599A Membrane only, 2-1/2” x 40”, with sleeve (pre June 2006)
ME40599 Membrane only, 2-1/2” x 40” (post June 2006)
3013392 Membrane housing assembly, flared ROMA (post June 2006)
3014055 Kit, Flared ROMA, 2” x 40”, Fittings
F - 8 0 1 S eries R O
SPARE PARTS continued
Part Product
NumberDescription
Reverse Osmosis Equipment
Miscellaneous
1234489 Regulator, product pressure adjustment
ME12776 Kit, cable assembly
ME30026 Alarm set switch knob
3003751 Front Panel (pre May 2006)
3003751 Front Panel (post May 2006)
ME41555 Hose clamp,SS,5/8”
ME50105 Clamp, crimp, 5/8” hose
ME60503 Crimping tool
ME20177 LED cover lens
Motor/Pump
3002168 Motor, 1/3HP, 110/230V, 50/60Hz
3007544 Pump, 100 GPH, SS w/regulator
Tubing
ME60370 Hose,3/8” ID x 5/8” OD, braided
ME60372 Hose,3/8” ID, clear vinyl
Valves
ME40584 Check valve, product return
ME41614 Valve, operate/flush, product
ME40291 Valve, ball, 1/4” x Barb
Note: The F-801 Series RO Machine has been discontinued. Service and Spare Parts are still available.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
131
Portable Reverse Osmosis Systems
Semp er P u re - RO
tm
S e mp e r P ur e S p a r e P a rts
Part Product
NumberDescription
Reverse Osmosis Equipment
RO Connectors
347-72-603
347-70-802
347-62-603
OS1162024
ME40513
ME40693
ME40603
ME42051
Stainless Steel Male Permeate Fitting (on RO)
Stainless Steel Female Feed, CIP and Drain Fitting (on RO)
Plastic Male Permeate Fitting (on RO)
Plastic Female Feed, CIP, and Drain Fitting (on RO) (Pre Serial # SP-03-151)
Plastic Female Feed, CIP, and Drain Fitting (on RO) (Pre Serial # SP-03-152)
Female x Hose Barb Product Water Fitting (on tubing)
Male x Hose Barb Feed, CIP and Drain Fittings (on tubing)
90 deg. Male x Hose Barb Feed, CIP and Drain Fittings (on tubing)
Electrical
250-24-810
250-24-812
250-13-117
250-13-136
250-18-105
250-18-612
100-04-206
250-05-314
250-19-240
Fan Assembly
Fan Retainer & Media
Fuse, 1 AMP
Fuse, 10 AMP
Indicator Lamps
Indicator Lamps Replacement Tool
LCD screen/board, complete
Cord, GFI assembly with HG plug
Ribbon Cable
Pump & Motor
600-12-067 Motor Kit, 1/2 HP, 110/230 V, 50/60 HZ
600-12-068 Pump Kit, 100 GPH, SS, w/parts
Sensors &
Instruments
600-12-061 Flow Meter Kit w/parts
300-04-203Gauge, Feedwater Pressure 0-100
300-04-206 Gauge, Pump Pressure 0-300
250-19-233 Conductivity probe w/cable
Valves
425-38-310
425-26-529
425-09-401
OS1113930
425-39-626
ME42047
Flush Valve, SS
Inlet Solenoid Valve, Brass
Needle Valve, SS
Permeate Pressure Relief Valve
1/4” Check Valve
3/8” Check Valve
Connectors &
Tubing
374-06-102
374-06-103
374-06-104
374-06-108
374-10-103
374-04-103
374-04-104
374-04-110
400-08-001
374-12-103
374-12-104
400-25-201
374-14-103
374-14-104
368-16-003
368-16-004
368-24-002
368-24-003
368-24-004
355-02-006
Connector TB x MPT ACL 1/4 x 1/8
Connector TB x MPT ACL 1/4 x 1/4
Connector TB x MPT ACL 3/8 x 3/8
Connector TB x MPT ACL 3/8 x 1/4
Connector TB x FPT ACL 1/4 x 1/4
Elbow 90 TB x MPT ACL 1/4 x 1/4
Elbow 90 TB x MPT ACL 3/8 x 3/8
Elbow 90 TB x MPT ACL 1/4 x 3/8
Elbow 90 FPT x FPT PVC 1/4
Elbow Union TB x TB ACL 1/4
Elbow Union TB x TB ACL 3/8
Nipple, PVC 1/4 x 2-1/8
Tee Union TB x TB ACL 1/4
Tee Union TB x TB ACL 3/8
Tubing, Nylon, Red 1/4
Tubing, Nylon, Blue 1/4
Tubing, Nylon, Black 3/8
Tubing, Nylon, Red 3/8
Tubing, Nylon, Blue 3/8
Hose, Clear Braided, 3/8
Membrane &
Housing
474-02-723 Membrane, 2.5” x 21”, TF
487-22-600 Membrane Housing Assembly - includes end blocks, fittings, housings rods
(no membranes)
3027542 CIP Tank Kit
Note: The Semper Pure RO Machine has been discontinued. Service and Spare Parts are still available.
132
800-633-3080 / www.mcpur.com / Mar Cor Purification
Cart Systems
c arts & dock in g stati ons
Mar Cor’s Mobile Acute Dialysis Support Center offers complete mobility of your
portable water treatment system. Use the M-1 Cart & M2 Ergo Cart to move your
reverse osmosis machine and equipment together. Or save additional valuable
time by using the docking station to move your dialysis machine, RO unit and
equipment all together to the treatment area.
M1 & M2 Ergo Carts
M1 Cart Features and Benefits
•Increased patient safety with exchangeable carbon tanks or PTG-520® carbon
block providing additional empty bed contact time.
•Exterior water connections and water test port promote easy operation.
•Powder coated finish is easy to clean.
•All swivel wheels with full locking capability.
•Additional sizes are available, not available with the Millenium HX
M2 Ergo Cart Features & Benefits
• Compatible with Millenium HX, Millenium, WRO 300, & WRO 300 H portable RO
systems, along with a variety of other portable RO systems.
• Large 4” swivel wheels with locking features for ease of maneuverability.
• Carbon block filter or GAC tanks protect RO membranes from chlorine / chloramines and remove lower molecular weight dissolved organics from RO feed water.
• Ergonomically designed handles to allow for improved maneuverability and less
strain for the operator.
ME14753-1
ME14754-1
ME14756-1
ME14757-1
M1 Cart, for 2 x 6” tanks
M1 Cart, for 3 x 6” tanks
M1 Cart, for 2 x 8” tanks
M1 Cart, for 3 x 8” tanks
M2 Ergo Cart with PTG-520® Carbon Block
M2 ERGO CARTS
PartProduct
NumberDescription
3027856
Cart, M2 Ergo
ERGO Docking Stations
Ergo Docking Station Features and Benefits
Reverse Osmosis Equipment
M1 CARTS
PartProduct
NumberDescription
•All of the M2 Ergo cart features and benefits.
• Extended base designed to accommodate the Fresenius® K and T model hemodialysis machines (only available with these dialysis machines).
• Extendable front plate is removable and is designed to securely hold the hemodialysis machine and concentrate containers in place during transit and treatment.
• Extension plate can be easily removed using thumb screws.
D ocking S tation
PartProduct
NumberDescription
3027950
Docking Station, Ergo
Note: Docking stations require assemble and attaching interconnecting
parts.
C arbon T anks
PartProduct
NumberDescription
ME12223-1
ME12089-1
ME12256-1
3024195
ME12386
Tank carbon exchange 0.25 cuft, 6”
Tank carbon exchange 0.40 cuft, 8”
Tank carbon exchange 0.50 cuft, 6”
Tank carbon exchange 0.85 cuft, 8”
Kit, carbon rebed portable exchange 0.25 cuft.
Ergo Docking Station with Fresenius® Hemodialysis
Delivery System & PTG-520® Carbon Block
Note: For PTG-520® Carbon Block Filters, See Page 15
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
133
Lab Reverse Osmosis Systems
3 3 0 0 Series
2,200 to 3,300 gallons per day
The Biolab 3300 Series Reverse Osmosis Systems are designed to
produce up to 2.29 US gpm (0.52 m3/h) of pure water. The 3300 Series
provides high quality product water, user-friendly controls, durable construction, and easy installation.
Typical Applications
Commercial water
Rinse water
Research and laboratory use
Boiler feed water
Humidification systems
Process ingredient water
Ion exchange pre-treatment
Car wash rinse water
Standard Features
Reverse Osmosis Equipment
1.0 - micron pre-filter
Automatic inlet shut-off valve
Rotary vane pump, 1 phase
Three variable flow meters
Auto-flush feature
Analog system control
Adjustable reject recirculation
Pre-filter, post filter, primary and final pressure gauges
Single source power
Optional conductivity meter
Operating Parameters
Operating Pressure: 225 psig (1551 KPA)
Maximum Recovery: 75%
Nominal Rejection: 95-98%
Operating Temperature: 35-95°F (2-35°C)
Minimum Inlet Pressure: 30 psig (210 KPA)
Design Temperature: 77°F (25°C)
Electrical: 115V, 60Hz
Materials of Construction
Frame: Epoxy coated steel
Membrane Elements: TF Polyamide
Membrane Housing: 304L Stainless Steel
Low Pressure Pipe: Sch. 80, PVC
High Pressure Pipe: Polypropylene
Control Enclosure: NEMA 4
Pump: Brass
Specifications
Product Flow: 1.5 - 2.3 GPM
Water Flow: 0.4 - 0.6 GPM
Motor HP: 1.0
Number of Elements: 2 or 3
Connections: 3/4” Inlet and Product. 1/2” Waste
Weight: 185 lbs
Specifications at 77°F (25°C).
All weights are approximate.
Feed water requirements and other specifications are available upon request.
134
800-633-3080 / www.mcpur.com / Mar Cor Purification
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
Cleaners & Disinfe c tants
Cleaners & disinfectants
135
Surface Disinfectants
M inn c are ® Cold S terilant
Minncare Cold Sterilant is an effective disinfectant and sterilant for hard
surfaces commonly found in pharmaceutical cleanrooms. Surfaces made
from non-porous materials such as plastics, stainless steel or glass can be
disinfected using Actril Cold Sterilant solutions. Examples include counter tops,
walls, floors, etc.
Minncare Cold Sterilant is a powerful disinfectant containing a proprietary
mixture of 4.5% peracetic acid and 22% hydrogen peroxide. It is effective
against a broad spectrum of organisms, including bacterial spores,
fungal spores, bacteria, mycobacteria, yeast, molds and viruses. It is a
powerful oxidizer that attacks and breaks down the organic components of
microorganisms, not just killing them, but destroying their structure. This
makes Minncare Cold Sterilant one of the fastest acting and most effective
disinfectants available.
Features and Benefits
•Superior biocidal activity, making it effective against spores, bacteria,
viruses and other organisms.
•Does not produce any toxic aldehyde vapors, keeping your employee safe.
•Compatible with all common cleanroom surfaces, keeping your facility safe.
•Easily disposable and biodegradable, keeping the environment safe.
•Filtered through 0.2 micron filters.
•Can be used as a germicidal disinfectant spray or as a cleaner/sanitizer
when diluted properly.
•Registered with the US Environmental Protection Agency (EPA).
MINNCARE COLD STERILANT
part Number
REFERENCE NumberDescriptionQuantity
Cleaners & Disinfe c tants
176-01-001
176-01-002
78325-400
78325-150
Minncare Cold Sterilant packaged in (4) single quarts Minncare Cold Sterilant packaged in (4) single gallons 1 case
1 case
176-01-003
78325-300
Minncare Cold Sterilant 40 gallons packaged in single 55 gallon drum (for shipping and handling purposes)
1 drum
Note: Minncare Cold Sterilant can only be shipped ground transportation.
Need Cleaning Hoses?
See page 54-55.
Looking for Process Meters?
See pages 156-158.
136
800-633-3080 / www.mcpur.com / Mar Cor Purification
Surface Disinfectants
M inn c are Dry Fog ™ S ystem
An integral part of modern cleanroom disinfection procedures, the Minncare Dry Fog
system provides an easy to use, high technology solution for clean room and critical
area fogging. The combination of our highly effective Minncare® Cold Sterilant chemical
and our state of the art Dry Fog delivery system enables users
to rapidly and safely deliver Minncare vapor to even the most
complex areas.
Its sanitary and autoclavable design will permit its use in the
most critical areas within pharmaceutical and other industries
concerned with maintaining the utmost levels of sterility. The
location and action of the dry fogging head at the highest point
of the equipment allows for rapid vapor dispersion and ensures
that the most distant areas are reached effectively.
Applications
•It can be used in clean rooms in a variety of facilities
including:
- Pharmaceutical
- Biotechnology
- Animal research facilities
- Medical device manufacturers.
Features and Benefits
•Short Process Time
The lack of toxic aldehyde vapors results in extremely short process times — over 95%
faster than some conventional systems. This means less production downtime and
lower total costs. Typically, the entire process can be completed in less than 3 hours,
depending upon room size and ventilation system efficiency, compared to up to 3-5
days with some conventional systems.
Cleaners & Disinfe c tants
•Ultrafine Droplets
The Dry Fog equipment is designed to produce fine droplets that average
7.5 microns in diameter which will ensure even dispersion of the Minncare
solution throughout the room. These small droplets will tend to bounce off of
solid surfaces and thus avoid excessive condensation, corrosion and surface
wetting issues associated with systems producing larger droplets. The small
droplets evaporate and the vapor will penetrate normally inaccessible areas
and lead to a more effective process.
•Highly Flexible System
The system is easily adaptable to differing room dimensions and
configurations and can be adjusted to suit any room height. It is readily transportable
and can be used in multiple locations, needing only a compressed air source to
operate. It will deliver an adequate solution quantity to rooms up to 35,000ft3
(1000m3). Beyond this size, multiple machines may be required.
•Optimal Efficacy
Minncare Cold Sterilant is a peracetic acid and hydrogen peroxide based proprietary
chemistry developed by Minntech for optimized biocidal efficacy. It is registered by the
EPA for use as a fog to enhance existing cleaning and disinfection process. It is fully
biodegradable and will leave no measurable air residuals once the room has been
fully ventilated. Minncare Cold Sterilant contains only pharmaceutical quality raw
materials, limiting the introduction of any undesirable components into the clean room
environment.
D ry F o g syst e m
Part
Number
REFERENCE
NumberDescription
290-01-021
78398-611
Dry Fog Assembly 26L, 7u, 1 nozzle
290-01-022
78398-612
Dry Fog Assembly 26L, 7u, 2 nozzle
290-01-023
78398-613
Dry Fog Assembly 26L, 7u, 3 nozzle
290-01-024
78398-614
Dry Fog Assembly 26L, 7u, 4 nozzle
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
137
System Disinfectants
minn c are ® co l d sterilant
Minncare® Cold Sterilant is a peracetic acid solution developed for use on reverse osmosis
membranes and their associated distribution systems. Peracetic acid solutions have been
developed by Minntech Corporation since 1976 and are currently being used in a wide
variety of applications. Minncare Cold Sterilant provides protection for your membranes,
protection for your employees, and protection for the environment. At the same time, it
provides superior disinfection that will improve your product quality.
Features and Benefits
•Provides 6 log reduction of bacteria population at a 100X dilution (1%) within
a 36-minute soak time.
•No toxic aldehyde vapors.
•Biodegradable; will decompose into oxygen, water and acetic acid.
•Compatible with thin film composite membranes.
MINNCARE COLD STERILANT
part Number
REFERENCE NumberDescriptionQuantity
176-01-001
176-01-002
78325-400
78325-150
Minncare Cold Sterilant packaged in (4) single quarts Minncare Cold Sterilant packaged in (4) single gallons 1 case
1 case
176-01-003
78325-300
Minncare Cold Sterilant 40 gallons packaged in single 55 gallon drum (for shipping and handling purposes)
1 drum
Note: Minncare Cold Sterilant can only be shipped ground transportation.
minn c are ® saniti z ati o n k it
Cleaners & Disinfe c tants
The convenient Minncare® Sanitization Kit allows the safe, easy disinfection of portable RO’s with
the same MINNCARE used for large water treatment and process systems in hospitals, clinics,
pharmaceutical companies and other industries, only packaged in a single use bottle. This
eliminates having to make any calculations or dilutions. Each kit will enable the user to complete 6
sanitizations and the kits are ground shippable via UPS or Federal Express.
M I N N C A R E S A N I T I Z AT I O N K I T
PART NUMBER
3026961
DESCRIPTION
QUANTITY
Each Kit Contains:
Six (6) Bottles of Full Strength MINNCARE (Approx. 90 ml/bottle)
1 kit
M inn c are ® T est stri p s
Minncare® 1% Test Strips
Minncare 1% Test Strips verify adequate concentration of a 1%
Minncare solution during disinfection of your high purity water
system. These convenient dip-and-read strips can be used at
any test port in your system to provide an accurate pass/fail
measurement of Minncare solution.
Minncare® Residual Test Strips
Minncare Residual Test Strips are easy to use and are
conveniently packaged 100 test strips per container. Each
strip has a “reaction zone” pad located at one end of the strip.
When stored and used properly, the test strip pad can indicate
residual Minncare levels as low as 1 part per million (ppm). The
reaction zones are set to provide six different reading levels at
100, 30, 10, 3, 1 and 0 (zero) parts per million.
M inncare T est S trip
Part
Number
185-40-004
185-40-005
REFERENCEProduct
NumberDescription
78338-000
78339-000
Minncare Residual Test Strips
Minncare 1% Test Strips
Size
100/Vial
100/Vial
WARNING: The disinfectants listed above contain hazardous components. Refer to the individual Material Safety Data Sheets (MSDS) for
specific information on proper handling, personal protective equipment and disposal methods. This information is available upon request.
Contact us for disinfecting guidelines or mixing directions for your specific requirements.
138
800-633-3080 / www.mcpur.com / Mar Cor Purification
Liquid Chemical Cleaners
Membrane Cleaners
Acid Cleaner
RoClean™ L403 is a low pH liquid cleaner designed to remove metal foulants such as iron, manganese, and aluminum as well as calcium
carbonate scale deposits from spiral wound thinfilm and cellulose acetate elements. The formulation is temperature compensated to ensure
that the cleaning solution remains in the effective pH range regardless of variations in solution temperature.
Features and Benefits
•Compatible with thin film composite and cellulose acetate membranes.
•NSF Certifed for use in drinking water systems.
•Contains a special blend of buffers, chelants, and reducing agents, to promote the dissolution of metal deposits.
•Superior results to generic citric and hydrochloric acid solutions.
•Highly buffered to resist pH changes during the cleaning process.
•Temperature compensated to maintain optimum pH over a wide temperature range.
A cid C leaner
Part
NumberDescriptionQuantity
175-02-027
Low pH cleaner, Liquid
1 gal.
Alkaline Cleaner
RoClean™ L211 is a high pH, low foaming liquid cleaner formulated to remove silt and organic foulants such as colloidal silica, clays, organic
color, and bacterial slime from spiral wound thinfilm elements. The formulation is temperature compensated to ensure that the cleaning
solution remains in the effective pH range regardless of variations in solution temperature.
Features and Benefits
A lkaline C leaner
Part
NumberDescriptionQuantity)
175-02-029
High pH cleaner, Liquid
1 gal.
Liqui-Clean Cleaner
Offering a low pH cleaner (calcium/iron removal) and a high pH cleaner (silt/organics removal). Both are in liquid form. The low pH cleaner
attacks mineral scale deposits such as calcium, magnesium and iron build-up, and should be used first. The high pH cleaner will remove
accumulated silt and organic matter from the RO membrane.
L I QU I - C L E A N C L E A N E R
PART NUMBER
DESCRIPTION
QUANTITY
1228653
1228654
1228791
1228792
Cleaner, Liqui-Clean 103™, Low pH
Cleaner, Liqui-Clean 103™, Low pH
Cleaner, Liqui-Clean 511™, High pH
Cleaner, Liqui-Clean 511™, High pH
1 gal.
5 gal.
1 gal.
5 gal.
Cleaners & Disinfe c tants
•Compatible with thinfilm membranes.
•Contains a proprietary blend of buffers, low foaming surfactants and chelants to dissolve organic foulants and disperse colloidal particles.
•Superior results to generic cleaners.
•Highly buffered to resist pH changes during the cleaning process.
•Temperature compensated to maintain optimum pH over a wide temperature range.
Buffer Solution
For pH buffering on medium and large systems. Solution is 33% sulfuric acid.
S ulfuric A cid C leaner
Part
NumberDescriptionQuantity
175-02-017
Buffer Solution, Liquid
4x1 gal.
WARNING: Most of the cleaners listed above contain hazardous components. Refer to the individual Material Safety Data Sheets
(MSDS) for the cleaner you are using for specific information on proper handling, personal protective equipment and disposal methods.
This information is available upon request. Contact us for cleaning guidelines or mixing directions for your specific requirements.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
139
Liquid Chemical Cleaners
M embrane Cleaners
Biosan Cleaner
Biosan is a liquid cleaner/descaler agent intended for use in removing mineral scale and organic biofilm and is a short-term storage solution for RO
water systems. It is not intended for use in hemodialysis machines. It can be used as a low pH cleaner or a shot term (30 days) storage solution.
B I O S A N C leaner
Part
NumberDescriptionQuantity
ME14962
Cleaner, Biosan, descaling agent
1 gal.
ME14963
Cleaner, Biosan, descaling agent
5 gal.
Dry Chemical Cleaners
membrane Cleaners
Minnclean ® AC
Features and Benefits
• For use on thin film composite membranes (polyamide), cellulose acetate membranes and
polysulfone membranes.
• Formulated to remove mineral scale from the membrane surface.
• AC is an acidic, low pH cleaning product.
acid cleaner
Part NumberDEscriptionQuantity
Cleaners & Disinfe c tants
3024996
Minnclean AC, 10
1x10 lb.
3024997
Minnclean AC, 20
2x10 lb.
Minnclean ® TF
Features and Benefits
• For use on thin film composite (polyamide) RO system membranes.
• Formulated to remove organic foulants such as grease, oils, grime and biological matter.
• TF is an alkaline, high pH cleaning product.
alkaline cleaner
Part NumberDEscriptionQuantity
3024998
Minnclean TF, 10
1x10 lb.
3024999
Minnclean TF, 20
2x10 lb.
WARNING: Most of the cleaners listed above contain hazardous components. Refer to the individual Material Safety Data Sheets
(MSDS) for the cleaner you are using for specific information on proper handling, personal protective equipment and disposal methods.
This information is available upon request. Contact us for cleaning guidelines or mixing directions for your specific requirements.
140
800-633-3080 / www.mcpur.com / Mar Cor Purification
Water Quality Testing Products
Chl orine T est Kit / Su p p lies
Get instant results when testing for chlorine levels in water. Low
concentrates of free, total, and various forms of combined chlorine
are determined colorimetrically using DPD tablets or liquids. The
portable test kit includes all of the necessary reagents and labware.
Test kit is furnished with (50) DPD #1 and (50) DPD #3 tablets along
with octet comparator and test tubes. Complete in a padded plastic
case.
Features and Benefits
•Easy to use with accurate results.
•Portable case lets you take it with you.
•6819 Range: 0.1- 1.0 ppm.
C hlorine T est K it / S upplies
Part
Number
MODELProduct
NumberDescription
Size
185-15-001
6819
Chlorine Test Kit
185-15-005
6999
Chlorine Tablets DPD #1
1 pk (10 Tblts)
185-15-009
6905
Chlorine Tablets DPD #3
1 pk (10 Tblts)
185-15-010
4100-G
185-09-120
230
Test Tube, Glass
5 ml
185-09-121
822
Test Tube, Glass
10 ml
Chlorine Reagent O-Tolidine
N/A
30 ml
Cleaners & Disinfe c tants
H ar d ness T est Kit/ Su p p lies
The 4482-LT-01 allows you to get fast accurate results when testing for
hardness levels in water. Tests for calcium, magnesium and total hardness.
EDTA titration is used for determinations. This kit expresses results as CaCO3
and uses a liquid buffer, a tablet indicator, and a dropper pipet for dispensing.
Complete in a padded plastic case.
Features and Benefits
• Easy to use with accurate results.
• Portable case lets you take it with you.
• 4482-LT-01 Range: 1 drop = 10 ppm or 1 gpg.
• 50 tests at 200 ppm or 20 gpg
H ardness T est K it / S upplies
Part
Number
MODELProduct
NumberDescription
Hardness Test Kit
Size
185-10-001
4482-LT-01
185-10-002
4483-E
Hardness Reagent #5
15 ml
185-10-003
4484-J
Hardness Reagent #6
100 Tblts
185-10-004
4487WT-G
Hardness Reagent #7
30 ml
185-09-122
4488
Test Tube, Glass
N/A
N/A
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
141
Water Quality Testing Products
I r on T est Kit/ Su p p lies
Model number 4447 allows you to obtain fast results when testing water for
iron. This test kit contains an octet comparator, test tubes, reagent solution and
reagent powder. Measures total iron. Complete in a padded plastic case.
Features and Benefits
• Easy to use with accurate results.
• Portable case lets you take it with you.
• 4447 Range: 0.5 - 10.0 ppm.
• 100 tests per kit.
I ron T est K it / S upplies
Part
Number
MODELProduct
NumberDescription
Iron Test Kit
Size
185-25-001
4447
185-25-002
4450-G
Iron Reagent #1
30 ml
N/A
185-25-003
4451-S
Iron Powder #2
4.5 g
p H Test Kit/ Su p p lies
One of the most common analyses, pH must be controlled and monitored because
it plays an essential role in almost all chemical and biological processes. Get fast
results when testing water for pH levels. Model Number 2119 contains an octet
comparator, graduated test tube, and a bottle of indicator solution. This kit is a wide
range verses a single range. Complete in a padded plastic case.
Cleaners & Disinfe c tants
Features and Benefits
• Easy to use with accurate results.
• Portable case lets you take it with you.
• 2119 Range: 5.0 - 8.5.
• 50 tests per kit.
p h T est K it / S upplies
Part
Number
MODELProduct
NumberDescription
185-20-001
2119
185-20-002
2218-G
185-09-120
230
pH Test Kit
Size
N/A
Wide Range pH Solution
30 ml
Test Tube, Glass
5 ml
Water Quality Test Strips
W ater Q uality T est S trip
Part
Number
MODELProduct
NumberDescription
185-40-003
185-40-007
90424
91306
pH Test Strips
Bisulfite Test Strips
Size
200/Vial
50/Vial
Note: Test strips can only be used once for reliability.
Want To Check TDS?
See pages 156-158.
142
800-633-3080 / www.mcpur.com / Mar Cor Purification
Water Quality Testing Products
S erim tm T est Kits
Features and Benefits
•Used in thousands of dialysis centers worldwide.
•Over 10 million test performed every year with Serim
products.
•510(k) registered kits; manufactured under GMP.
•Dry reagent test are convenient, easily interpreted, and less
labor intensive.
•Reliable and consistent method for on-site testing.
•Sold as a kit.
S erim T est K its
tm
Part
Number
MODELProduct
NumberDescriptionUtility
Range
185-40-021 5100A
Residual Chlorine Test Kit
185-40-023
5105
Residual Peroxide Test Kit
Testing for residual bleach.
6x 100/Vial
Testing for residual levels of 1.0 - 10 ppm
peractic acid/peroxide-based disinfectants.
6x 100/Vial
(no controls)
185-40-025
5112
Residual Testing for residual levels of Formaldehydeformaldehyde.
Test Kit
185-40-026
5106
Peractic Acid Potency
Test Kit
For confirming presence of effective levels of peractic acid.
1.0 - 5.0 ppm
6x 100/Vial
Neg - 400 ppm or < Pos - 800 ppm or >
6x 100/Vial
Used to test for low levels “Positive/Negative” of chloramine and Test detects 0.1 ppm
free chlorine (total chlorine) and above
in treated water.
185-40-030 5116A
Bicarb pH II Test Kit
Determination of pH in pH 6.5 - 8.5
concentrated bicarb solutions.
185-40-031
5129
Hardness
Test Kit
Determination of hardness
in the feed water.
Decects low levels of chloramine
and free chlorine (total chlorine) in treated water.
5x 20/Vial,
1 strip holder,
1 bottle reagent,
plus 10 ctrl tabs
5x 100/Vial
plus solution
0.6 - 7 grains/gallon
10 - 120 ppm as CA CO3
6x 50/Vial
“Positive/Negative”
Test detects 0.1 ppm
and above
5x 100/Vial
plus 5 sample cups
Cleaners & Disinfe c tants
185-40-029
5109
HiSense Test Kit
5167
HiSense Ultra 0.1™
3024671
Test Kit
Size
0.5 - 5.0 ppm
Need Cleaning Hoses?
See page 54-55.
Looking for Process Meters?
See pages 156-158.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
143
Water Quality Testing Products
TEST KITS AND SUPPLIES
Part
Number
MODELProduct
NumberDescription
ME50033
N/A
Hardness Test Kit
185-10-155
145700
Hardness Test Kit, Total & Calcium
185-10-101
42432
Hardness 1, solution, Buffer
100 ml
185-10-102
42532
Hardness 2, solution, ManVer
100 ml
185-10-103
42632
Hardness 3, solution, Titrant
100 ml
N/A
ME12345
N/A
Chlorine Test Kit, Total, 20 Tests
N/A
ME11656
N/A
Chlorine Test Kit, Total, 40 Tests
N/A
185-15-504
223101
Chlorine Test Kit, Free & Total
N/A
185-15-521
1407699
DPD Total Chlorine, 100 pk, pillows
5 ml
185-15-523
1407628
DPD Total Chlorine, 1000 pk, pillows
5 ml
185-15-522
1407799
DPD Free Chlorine, 100 pk, pillows
5 ml
185-15-524
1407728
DPD Free Chlorine, 1000 pk, pillows
5 ml
185-25-101
147011
Wide Range pH Test Kit
N/A
185-25-512
2329332
Wide Range pH solution
100 ml
185-45-001
46700-04
Ozone Test Kit
N/A
185-45-002
25170-25
Ozone Reagent, MR, AccuVac® ,25 pk, ampules N/A
185-50-025
MHPC10025
Heterotrophin Plate Culture, 25 pk
N/A
ME70001
N/A
Water analysis test, AAMI standards
N/A
ME14604
N/A
SDI test kit, 10 tests
N/A
Cleaners & Disinfe c tants
Rapid Endotoxin Detection
Pyr o sate tm
The Pyrosate kit is a major advance in LAL gel-clot testing. The assy does not
require special training or laboratory supplies. The step-by-step illustrated
instructions allow the user to perform assays within minutes. The Pyrosate kit
provides rapid results and is especially convenient for testing water and dialysate
as no dilutions are required.
Features and Benefits
Applications
•Shorter assay time — less than 30 minutes.
•Endotoxin specific.
•No dilutions required.
•No refrigeration required.
•Matched positive product control.
Hemodialysis
Water and Water Systems
Filter Industry
Research
Final Product
PYROSATE
PART
NUMBER
STOCKProduct
NUMBERDESCRIPTION
185-52-310
PSD250-10
Pyrosate 10 Test Kit; 0.25 EU/mL
185-52-315
PSD250-30
Pyrosate 30 Test Kit; 0.25 EU/mL
185-52-317
PPT50
Disposable Pipettes, 50/pack
Note: May be used for all endotoxin testing applications not requiring FDA-licensed LAL.
144
Size
N/A
800-633-3080 / www.mcpur.com / Mar Cor Purification
Cleaning Systems
M ar C or p u rifi cation
Mar Cor Purification manufactures a custom made Clean-In-Place (CIP) cleaning systems
for reverse osmosis (RO) machines. These systems allow end users to safely and efficiently
clean/disinfect their RO machine. We offer the CIP Container Kit as our standard package.
This kit is made using quality materials to provide you with years of reliable service.
Cleaning Container
Features and Benefits
•15 Gallon PE Container with handle.
•(3) 3/4” PVC Bulkhead fittings with dixon fitting.
•(1) 3/4” PVC Ball Valve.
•(3) 6ft High Purity PVC Hoses, 3/4”.
•PVC pipe internals.
cleaning C ontainer
PartmodelProduct
Number
NumberDescription
187-04-015 MC-CIP-015K
15 Gallon CIP Container Kit
MC-CIP-015K
Cleaning Pump
Features and Benefits
•Ideal for cleaning and disinfecting reverse osmosis machines,
•Centrifugal chemical resistant stainless steel pump.
•Powerful 3/4 hp motor, complete with 15 ft power cord and plug.
•Includes fittings and hose to readily connect to MC-CIP-015K.
•Inlet and Outlet are fitted with 3/4” MGHT.
•Ships ready to use!
Cleaners & Disinfe c tants
cleaning P ump
PartVolts Weight
NumberDescription
(60HZ) (lbs)
034-75-202
3/4HP Cleaning Pump, includes cord and plug
115V
30
Cleaning System
Features and Benefits
•30 Gallon PE tank with lid.
•(3) PVC tank adaptors and plumbing.
•(3) PVC valves for RO.
•Set of quick connects for tank and RO.
•(30’) of 3/4” high purity hose.
•(1) 3/4 HP pump cord/plug and fittings, 115V.
cleaning system
Part
NumberDescription
3024611
Kit, 30-Gallon Disinfect Tank and Pump
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
145
Cleaning Systems
c lean - in- p lac e system
Lightweight Clean-In-Place Tank for Portable Reverse Osmosis Systems
Designed for Clean-In-Place applications, Mar Cor Purification’s CIP tank features a light weight, stable construction and spill proof lid. The tank
reduces chemical odors and provides the user quick connect ports for convenient attachments.
Standard Features & Benefits
•Dedicated for Portable RO machines
•Designed exclusively for Clean-In-Place applications
•Built-in Dip Strip test site to verify success
•Used for many MCP models making it multipurpose
•Light-weight with plastic hinge and wide grip handle
•Secure, locking style lid, prevents splash and reduces chemical odors
•Stable design, spill-proof
•Sealed lid helps reduce chemical odor
•Pop-up hinged lid to conveniently add chemical or drain contents
•Basic instruction labels with indicator water fill lines including chemical volume
addition information
•Quick connect ports for product, waste and disinfect ports
•Complete with 2 hoses (4 ft long) with connectors (waste and disinfect)*
L I G H T W E I G H T C I P TA N K
PART NUMBER
DIMENSIONS
SIZE
MATERIAL
3027542
10.5” H x 12” W, x 12” L
2.5 gallons (9.5 liters)
Polyethylene
*Specifically designed for Millenium RO, but can be adapted for other models such as
700 Series, F-801, and Semper Pure RO Machines.
Cleaners & Disinfe c tants
146
Need Portable RO Equipment?
See pages 120-132.
Need Membrane Disinfectant?
See page 138.
800-633-3080 / www.mcpur.com / Mar Cor Purification
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
p r o c ess c o ntr o ls
PRocess Controls
147
Pressure Gauges
Brass Gau ges
Industrial Strength Liquid-Filled Gauges. This series is designed with a
stainless steel case that offers protection from corrosive environments.
Being liquid-filled helps to dampen the effects of vibration and pulsation.
It also lubricates the movement which extends the life of the gauge.
Specifications
•Case - Stainless steel
•Ring - Stainless steel
•Bourdon Tube & Socket (Wetted
Parts) - Copper alloy
•Window - Polycarbonate (2-1/2”)
Acrylic (4”)
•Dial - ABS
•Pointer - Black Aluminum
•O-ring - EPDM
•Liquid filling - Food-grade glycerine
•Accuracy - ±1.5% of span (2-1/2”)
±1.0% of span (4”)
B rass W etted P arts , L iquid F illed P S I G auge
PartPSIDiameter
Mounting
Number
Range
(in.)Connection
NPT Con.
Size (in.)
300-02-100
15
2-1/2
Lower
1/4
300-02-101
30
2-1/2
Lower
1/4
300-02-102
60
2-1/2
Lower
1/4
300-02-103
100
2-1/2
Lower
1/4
300-02-104
160
2-1/2
Lower
1/4
300-02-105
200
2-1/2
Lower
1/4
300-02-106
300
2-1/2
Lower
1/4
300-02-107
400
2-1/2
Lower
1/4
300-02-108
600
2-1/2
Lower
1/4
B rass W etted P arts , L iquid F illed P S I G auge
PartPSIDiameter
Mounting
Number
Range
(in.)Connection
NPT Con.
Size (in.)
300-02-201
30
2-1/2
Center Back
1/4
300-02-202
60
2-1/2
Center Back
1/4
300-02-203
100
2-1/2
Center Back
1/4
300-02-204
160
2-1/2
Center Back
1/4
300-02-205
200
2-1/2
Center Back
1/4
300-02-206
300
2-1/2
Center Back
1/4
300-02-208
600
2-1/2
Center Back
1/4
Stainless Steel Gau g es
Pr o c ess C o ntr o ls
Industrial Strength Liquid-Filled Gauges. This series is designed with 316
stainless steel wetted parts and makes this gauge ideal for corrosive
media. Being Liquid-Filled helps to dampen the effects of vibration and
pulsation. Every metal component of this gauge is made of high-quality,
highly finished stainless steel.
Specifications
•Case - Stainless steel
•Ring - Stainless steel
•Bourdon Tube &
Socket (Wetted Parts) 316 stainless steel
•Window Polycarbonate (2-1/2”)
Acrylic (4”)
•Dial - White Aluminum
•Pointer Black Aluminum
•O-ring - EPDM
•Liquid filling - Food-grade glycerine
•Accuracy - ±1.5% of span (2-1/2”) ±1.0% of span (4”)
•Optional Accessory Kits - Center Back Mount
3 1 6 S S W etted P arts , L iquid F illed P S I G auge
PartPSIDiameter
Mounting
Number
Range
(in.)Connection
NPT Con.
Size (in.)
300-04-100
15
2-1/2
Lower
1/4
300-04-101
30
2-1/2
Lower
1/4
300-04-102
60
2-1/2
Lower
1/4
300-04-103
100
2-1/2
Lower
1/4
300-04-104
160
2-1/2
Lower
1/4
300-04-105
200
2-1/2
Lower
1/4
300-04-106
300
2-1/2
Lower
1/4
300-04-107
400
2-1/2
Lower
1/4
300-04-108
600
2-1/2
Lower
1/4
3 1 6 S S W etted P arts , L iquid F illed P S I G auge
PartPSIDiameter
Mounting
Number
Range
(in.)Connection
NPT Con.
Size (in.)
300-04-200
15
2-1/2
Center Back
1/4
300-04-201
30
2-1/2
Center Back
1/4
300-04-202
60
2-1/2
Center Back
1/4
300-04-203
100
2-1/2
Center Back
1/4
300-04-204
160
2-1/2
Center Back
1/4
300-04-205
200
2-1/2
Center Back
1/4
300-04-206
300
2-1/2
Center Back
1/4
300-04-207
400
2-1/2
Center Back
1/4
300-04-208
600
2-1/2
Center Back
1/4
A ccessories
PartProduct
NumberDescription
300-52-001
148
800-633-3080 / www.mcpur.com / Mar Cor Purification
SS, U-Clamp Bracket for 2-1/2” Dial Gauge
Pressure Gauges
e c o n o mi c B rass Ga u g es
“Economy” gauges provide reliable service in a wide range of applications including pumps,
compressors, and other equipment. Gauges come in several ranges with accuracy of ±32-3%. General use with water, oil, air, and chemicals compatible with beryllium copper,
phosphor bronze, and brass. Individually boxed.
Specifications
•Bourdon tube - Phosphor bronze bourdon tube
•Socket - Brass socket
•Window Glass window on 2-1/2”
Plastic window on 1-1/2 and 2”
•Dial - Galvalume Dial
•Pointer - Aluminum pointer
•Case - Painted steel case
•Ambient temperature - 0° to 225°F
B rass W etted P arts , D ry , P lastic P S I G auge
PartPSIDia
Mounting
Number
Range
(in.)Connection
NPT Con.
Size (in.)
300-36-101
60
2
Lower
1/4
300-36-102
100
2
Lower
1/4
300-36-103
200
2
Lower
1/4
300-36-104
300
2
Lower
1/4
300-36-201
100
2
Center Back
1/4
300-36-202
200
2
Center Back
1/4
300-36-203
300
2
Center Back
1/4
Temperature Gauges
B i - Metal T hermo meters
High quality industrial bi-metal dial thermometers available at an affordable price. These gauges are
designed to meet or exceed ASME B40.3 standards. A wide variety of styles and sizes to choose from.
•Case - Sturdy, corrosion resistant 304 SS and bezel.
•Dial face - Anti-parallax heavy gauge aluminum.
•Scales - Dual scales offered.
•Pointer - Balanced, lightweight aluminum with black finish.
•Reset Feature - External Reset feature allows field calibration.
•Weather Tight - Clear strong glass gasketed to maintain weather
tight integrity.
•Stem In - Constructed of 304 SS and welded to prevent leakage.
•Accuracy - Accurate within one percent of full scale.
•Cases Hermetically sealed - Prevents fogging and damage caused
by moisture to the working components.
T emperature G auges - B ack C onnection
Part
Number
302-30-103
StemDial Size
Length (in.)
(in.)
4
3
Temp.
Range (°F)
Temp.
Range (°C)
25 to 125
-5 to 50
302-30-104
2-1/2
3
0 to 140
-20 to 60
302-30-106
2-1/2
3
0 to 250
-20 to 120
p r o c ess c o ntr o ls
Specifications
T emperature G auges - B ottom C onnection
Part
Number
StemDial Size
Length (in.)
(in.)
Temp.
Range (°F)
Temp.
Range (°C)
302-31-104
2-1/2
3
0 to 140
-20 to 60
302-31-105
2-1/2
3
0 to 200
-15 to 90
302-31-106
2-1/2
3
0 to 250
-20 to 120
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
149
Flow Meters
B lu e- W hite ®
Variable Area Flow Meters
Blue-White variable area flow meters are manufactured in over 240 configurations, with styles for in-line, panel mount or closed pipe
installations. A wide range of calibrations are offered. Blue-White flow meters are constructed of either machined, highly-polished acrylic or heat
and chemical resistant injection molded polysulfone. Internal parts are corrosion and wear resistant. Scales are screen printed onto the meter
directly in front of the float for accurate meter reading.
Applications
•Reverse Osmosis Equipment
•D.I. and ultra pure water systems
•Pollution treatment and regulating equipment
•Filtration systems
F- 4 0 0 LN S E RIE S
In-Line Flow Meters
I n - L ine F low M eters
Features and Benefits
Part
Number
•Clear-as-glass machined acrylic
construction.
•Corrosion resistant 316 SS float,
except model
F-40375LN-6 which is PVC.
•Reinforced FPT adapters.
•Viton® O-ring seals.
•Dual scale readings.
Pr o c ess C o ntr o ls
F- 5 5 0 SE RIE S
Panel Mount Flow Meters
Features and Benefits
•Solid, one-piece machined acrylic meter body.
•Uniform dimensions on lower rate units (to 5.0 gpm).
•316 SS float parts.
•Rear inlet and outlet ports for panel mounting.
•316 SS float guide reduces float oscillation.
•Permanent screen-printed scales positioned directly in front of float.
P anel M ount F low M eters
Part
Number
MODELPipe
Number
Size (in.)
Scale
(lpm)
310-04-501
F-55250L
1/4
.025-.250
310-04-502
F-55375LN
3/8
.1-1
.4-4
ME40213
F-55376LN
3/8
.2-2
.75-7.5
.1-1
ME40337
F-55500LN
1/2
.5-5
2-20
ME40396
F-55750L
3/4
2-10
8-38
310-04-506
F-55015L
1
1-15
5-60
1
2-20
7.5-70
310-04-507 F-55200L
150
Scale
(gpm)
800-633-3080 / www.mcpur.com / Mar Cor Purification
MODELPipe
Number
Size (in.)
Scale
(gpm)
Scale
(lpm)
310-02-404
F-40375LN-6
3/8
.2-2
1-7.5
310-02-406
F-40500LN-6
3/8
.5-5
2-20
310-02-407
F-40375LN-8
1/2
.1-1
.4-4
310-02-408
F-40376LN-8
1/2
.2-2
1-7.5
310-02-409
F-40377LN-8
1/2
.3-3
1.5-11.5
310-02-410
F-40500LN-8
1/2
.5-5
2-20
310-02-411 F-40750LN-12
3/4
1-10
4-38
310-02-412 F-41017LN-12
3/4
1-17
4-64
310-02-413 F-41000LN-12
3/4
2-20
8-80
310-02-414 F-40750LN-16
1
1-10
4.38
310-02-415 F-41017LN-16
1
1-17
4-64
310-02-416 F-41000LN-16
1
2-20
8-80
Flow Meters
L OOP F LOW M E T E Rs k its
Mar Cor Purification offers loop flow meter kits are designed to be installed on water
treatment distribution and return loop piping systems. Three different sized kits are available
depending on gallon per minute flow rate requirements.
Each kit contains all of the necessary parts to install (1) flow meter on the Loop Supply and
(1) flow meter on the Loop Return. These kits are intended for piping systems that are made
of Polyvinylchloride (PVC). Each kit includes (2) flow meters, mounting hardware, PVC fitting
adaptors, PVC unions, and PVC reducer bushing. General instructions (P/N 3018406) are
included with each kit to assist with the installation of the items.
Specifications
Flow Meter Specifications for 10 and 20 GPM:
Description: In-line vertical
Capacity:
Model Specific: 1-10 GPM; 1-20 GPM
Materials: Solid cast acrylic (machined)
PVC connector ends
EPDM o-rings
316 Stainless Steel internal parts
Scale Length:
Approx. 4”
Overall Height:
Approx. 8-3/8”
Width:
Approx. 1-3/4”
Max. Temp.:
125°F
Max. Pressure:
125 PSI
Connections:
1” Female National Pipe Thread
Accuracy:
± 4% of full scale flow
LO O P F LO W M E T E R K I T S
PART
NUMBER
PRODUCT
DESCRIPTION
ME14674
ME14675
ME14676
Kit, Loop Flow Meter, 10 GPM
Kit, Loop Flow Meter, 20 GPM
Kit, Loop Flow Meter, 30 GPM
p r o c ess c o ntr o ls
Flow Meter Specifications for 30 GPM:
Description: In-line vertical
Capacity:
Model Specific: 1-30 GPM
Materials: Solid cast acrylic (machined)
PVC connector ends
EPDM o-rings
316 Stainless Steel internal parts
Scale Length:
Approx. 5”
Overall Height:
Approx. 10-1/4”
Width:
Approx. 2”
Max. Temp.:
130°F
Max. Pressure:
150 PSI
Connections:
1” Female National Pipe Thread
Accuracy:
± 3% to ± 6% of full scale flow
Sterilization: Available presterilized (gamma)
Looking to Measure Flow Velocity?
See page 163.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
151
Totalizing Meters
B ad g er M eter
Recordall® Disc Meters
BadgerMeter Recordall® Disc meters provide effective metering solutions for a wide variety
of small and intermediate service applications. When it comes to water meters, performance
and reliability are the key measures. Badger Meter’s record of long-term performance in the
field ensures the highest revenue generation from their metering system. The Recordall Disc
meter line has been certified to comply with ANSI/NSF Standard 61. All components within the
thermoplastic meter, i.e., disc, chamber, housing, O-rings, etc., comprise the certified system.
Applications
For use in measurement of potable cold water in residential, commercial/industrial services
where flow is in one direction only.
Specifications
Construction - Badger Recordall Disc meter construction, which complies with ANSI/AWWA
standard C710, consists of three basic components: meter housing, measuring chamber,
and permanently sealed register. The water meter is either
thermoplastic or bronze with externally-threaded spuds. A
B adger T otalizing M eters
corrosion-resistant thermoplastic material is used for the
PartModelStyleOperating Connections
Number
NUMBER
(material)
Range (gpm)
(NPT)
measuring chamber.
Magnetic Drive - Through the use of high-strength magnets,
312-03-112
25PN-3/4 Thermoplastic
1/4 - 25
3/4”
provides positive, reliable and dependable register coupling for
312-03-113
40PN
Thermoplastic
3/4 - 50
1”
straight-reading, remote or automatic meter reading options.
312-03-211
35
Brass
3/4 - 35
3/4”
Maintenance - Badger Recordall Disc meters are designed and
manufactured to provide long-term service with minimal
312-03-223
70
Brass
1-1/4 - 70
1”
maintenance. When maintenance is required, it can be
performed easily either at the meter installation or at any other
convenient location.
Connections - Tailpieces/Unions for installations of meters on various pipe types and sizes,
including misaligned pipes, are available as an option.
Maximum Operating Temperature - 80°F (26°C).
Maximum Operating Pressure - 150psi (10 bar).
Measuring Element - Nutating disc, positive displacement.
Pr o c ess C o ntr o ls
Carlon
Gallon Meters
Carlon meters have a totalizing register, which continuously indicates the number of gallons, which
have passed through the meter. Models to select from include the STD and JLP series. Carlon STD
Series Meters are available in 5/8” through 2” sizes, and in 20 to 160 GPM maximum capacities. This
meter has a rust-free bronze main case. This meter is a positive displacement type with a hermetically
sealed register. This design improves low flow accuracy and provides a practically maintenancefree meter. Model comes in US Gallon registration. Carlon JLP Series Plastic Water Meters have a
polycarbonate main case, and are designed for use with slightly aggressive liquids, such as deionized
water. They operate in the same manner as the STD Models.
Features and Benefits
•Industrial Type Meters designed for long continuous service.
•Cold Water Meters from 5/8” to 2”.
•For Industrial and Commercial applications.
•Cost-saving uses where large volumes of water are used.
C arlon T otalizing M eters
Part
Number
152
Model
Number
StyleOperating Connections
(material)
Range (gpm)
(NPT)
312-05-101
062JLP
Plastic
1-20
1/2”
312-05-102
062JLP-1
Plastic
1-20
3/4”
312-05-214
STD100
Bronze
1-50
1”
800-633-3080 / www.mcpur.com / Mar Cor Purification
Processing Controls
T h o rnt o n
Conductivity/Resistivity Monitor
Features and Benefits
•Large backlit 4-line display
•Compact ¼ DIN panel-mounting with NEMA 4X, IP65 panel seal
•Robust ½ DIN wall-mounting with NEMA 4X, IP65 back cover
•User-selectable dual-level password protection
•Internal PID control with relay or analog output
•USB port for configuration and data acquisition
•Direct sensor inputs for all parameters
•Compatible with existing Thornton sensors
•Plug-in terminal connectors for easy wiring
•Universal AC/DC power supply
•Multiple languages: English, French, German, Italian, Spanish
•CE compliant, UL Listed for US and Canadian standards
•Model: 58-001-314
- 2-channel
- ½ DIN Wall mount
- 4 analog / 4 relay
- Highest accuracy measurement & temperature compensation
- Wide range of measurements: Conductivity, Resistivity, Temperature, Total Dissolved Solids (ppm/ppb), % Rejection, and more.
Applications
Pure and ultrapure water treatment for semiconductor rinsing,
critical power/steam makeup and pharmaceutical waters.
Semiconductor processing in rinsers and wet benches with precise
resistivity measurement and temperature.
M300 CONDUCTIVITY/
RESISTIVITY INSTRUMENT
PART NUMBER
Power plant cycle chemistry and stator cooling monitoring with
exceptionally accurate temperature compensation for specific and
cation conductivity and pH and very low maintenance dissolved
oxygen measurement.
MODEL
NumberPOWER
3024571
58-001-314
110 VAC (24 VDC)
Pharmaceutical water monitoring to meet USP, EP, and JP
conductivity requirements including built in tables of alarm limits.
Sensors and Patch Cords
Specifications
For a 0.1/cm constant sensors
Conductivity range: 0.02 µs/cm to 600 µs/cm
Resistivity Range: 0.0017 M½ -cm to 50 M½ -cm
Operating Temperature Range: 32ºF (0º) to 200ºF (93ºC)
Maximum Operating Pressure: 250 psi (17.2 bars)
Accuracy (with calibration): ±1% (cell constant accuracy)
Total System Accuracy: ±2.5% of reading
Temperature Accuracy: ±0.1ºC @ 25ºC
Temperature Sensor: 1000½ Pt RTD
SENSOR PATCH CORDS
PART NUMBER MODEL
NUMBER
LENGTH
3024572
1010-67
323-17-734
1025-66
10 ft (3.0 m)
25 ft (7.6 m)
323-17-737
1115-66
150 ft (45.7 m)
p r o c ess c o ntr o ls
Reclaim, recycle and wastewater treatment for the above
industry applications for contaminant detection, diversion and
neutralization.
CONDUCTIVITY/RESISTIVITY SENSOR
PART NUMBER
323-17-511
MODEL
NUMBER
FITTING
240-201 3/4” NPTM
INSERTIONCABLE
LENGTH
LENGTH
1.35”
1.5 ft (0.5 m)
FITTING
MATERIAL
PTFE/SS
Note: Other instruments, sensors and cords are available.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
153
Processing Controls
H Y D R O - C HE CK
Conductivity and Resistivity Monitors
The 414C Conductivity Monitor-Controller is designed for the demands of water treatment applications, such as RO, distillation,
desalination, and more. It offers four range auto-ranging to 10,000 µs to insure precise accuracy and optimum resolution for virtually any
system. The 414R-HP Resistivity Monitor-Controllers are designed for water systems employing mixed-bed DI. It offers 2 range autoranging for increased precision for 18 megohm water. Both systems allow the temperature to be momentarily displayed in °C or °F. Both
feature a High/Low Set-Point Controller for connection of valves, alarms, etc. All are easily programmed via just 3 pushbuttons. Front panel
red and green LEDs indicate water quality relative to the set point.
Specifications
Monitor
Temperature Display: 0°-50°C or 32°-122°F
Accuracy:
Conductivity: ±3% of reading; Repeatability ±1%
Resistivity: ±1% of reading; Repeatability ±1%
Temperature: ±0.1°C
Temperature Compensation: Automatic to 25°C from 0 to 50°C
Display: 1/2 inch, 4 digit LCD
Controller
Relay: 1 SPDT rated 1 amp resistive @28 VDC; 0.5 amp resistive
@120VAC
Function: Adjustable High/Low Set-Point
Status Indicators:
Green LED / Above Set-Point
Red LED / Below Set-Point
Conductivity Relay Activation Delay: Adjustable from 0-999 seconds
Resistivity Relay Activation Delay: Adjustable from 0-120 seconds
Memory: non-volatile EPROM
General
Power Input: Selectable 110 or 220 VAC; 50 — 60 Hz
Conductivity Power Consumption: 52 milliwatts; 0.43mA @ 110 VAC
Resistivity Power Consumption: 2.4 watts; 20mA @ 110 VAC
Enclosure: ABS, Panel or Wall Mount
Pr o c ess C o ntr o ls
HYDRO-CHECK MONITOR-CONTROLLERS
PART
NUMBER
MODEL
NUMBER
MONITOR
RANGE
325-10-621
414C
Conductivity
0-10,000 µS
325-10-618
414R-HP
Resistivity
0-18 megohm
Conductivity and Resistivity Cells
Specifications
Type: Insertion Style, 1/2” or 3/4” MNPT fitting included
Conductivity Cell: 1.06 Cell Constant
Resistivity Cell: 0.05 Cell Constant
Temperature Sensor: Linear Thermistor Network
Maximum Sensor Deployment: 100ft of cable
Conductivity Wetted Materials: 316SS, Polypropylene,
Noryl731®, Viton®
Resistivity Wetted Materials: 316SS, Polypropylene,
PTFE, EPR/EPDM
HYDRO-CHECK CELLS
PART
NUMBER
MODELCABLE LENGTH
NUMBER
MONITOR
(ft)
325-10-881
CTS1-10
Conductivity
325-10-882
CTS1-25
Conductivity
25
325-10-884
CTS1-100
Conductivity
100
325-10-872
CS10S-25
Resistivity
25
325-10-874
CS10S-100
Resistivity
100
10
HYDRO-CHECK ACCESSORIES
154
800-633-3080 / www.mcpur.com / Mar Cor Purification
PART
NUMBER
MODEL
NUMBERDESCRIPTION
325-10-945
PC110
Power Cord
325-10-946
WMA
Wall Mount Adapter
Processing Controls
M yr on L
Conductivity and Resistivity Monitors - Series II
Myron L offers a proven way to measure water source impurities. The advanced circuitry of the
750 II series Conductivity Monitor and Resistivity Monitor guarantees accurate and reliable
measurement. Drift free performance is assured by state-of-the-art electronics, including highly
accurate drive voltage.
Conductivity Applications
Specifications
•Reverse Osmosis
•Seawater Desalinization
•Waste Treatment
•Food Processing
•Plating
•Laboratories
Readout - 2 1/2” monitor.
Accuracy - ±2% of full scale.
Sensitivity and Stability - 0.05% of full scale.
Repeatability - 0.1% of full scale.
Cell inputs - 1 (3 input option available).
Relay function Single setpoint control - Fully adjustable 0-100% of full scale.
Indicators - above (green) and below (red) setpoint LEDs.
Contact rating - SPDT 10 amp @ 250 VAC, 30 VDC.
Power - 115 VAC, 50/60 Hz, ±15% (changeable to 220 VAC), 25 mA.
Dimensions - 6”H x 4.8”W x 3.8”D.
Ambient Temp Range - -22°F to 140°F (-30°C - 60°C).
Weight - 2 lbs (0.9 kg).
Resistivity Applications
•Deionization (DI) and distillation
ultrapure
water treatment systems
•Electronics
•Pharmaceuticals
•Laboratories
•Food Processing
•Plating
C onductivity M onitor - A nalog
Features and Benefits
•Dual thermistor automatic
temperature compensation.
•Heavy Duty 10 amp relay.
•Internal setpoint discourages
unauthorized adjustment.
•Push-to-test setpoint check LEDs show “above/below.”
•NEMA 3 corrosion-proof enclosure.
Part Number
Model NUmber
Range
Type
322-20-712
757II
0-50 ppm
Analog
322-20-713
757II
0-100 µs
Analog
322-20-714
757II
0-100 ppm
Analog
322-20-715
757II
0-200 µs
Analog
1264619
758II
0-100ppm
Digital
3024524
758II
0-200 µs
Digital
R esistivity M onitor - A nalog
Part Number
TYPE
322-22-531
753II
0-20 meg
Digital
MODELCable Length
NUmber
(Ft.)
CS51-10
10
322-20-502
CS51-25
25
The Conductivity Monitor uses the CS51 cell (1.0 cell constant), recommended
for ranges of 0-20 through 20,000 µs or ppm. The sturdy 3/4” NPT polypropylene
bushing is modular for easy, inexpensive replacement.
The Resistivity Monitor uses a CS10 series cell. This reliable sensor is constant at
0.05. The sturdy 3/4” NPT polypropylene bushing is modular for easy, inexpensive
replacement.
p r o c ess c o ntr o ls
0-20 megAnalog
Conductivity and Resistivity Cells
322-20-501
Specifications
R esistivity C ell
Part
Number
Range
752II
C onductivity C ell
Part
Number
Model NUmber
322-22-521
MODELCable LENGTH
NUmber
(FT.)
Temp Compensation - two integral thermistors provide automatic TC to 25°C
between 32-212°F (0-100°C).
Pressure/Temp limits - 100 psi (690kPa) @ 212°F (100°C).
Cable - 24ga. shielded; 10’ (3 meters) standard; 25’ and 100’ (8 and 30 meter)
lengths available. 100’ is maximum recommended.
Dimensions - metal portion 1.2” (30mm) L; 0.5” (13mm) dia.
322-22-111
CS10-S-10
10
322-22-112
CS10-S-25
25
Part Number
MODEL NumberProduct Description
A ccessories
322-21-101
PC
115V Power cord (8 ft. with plug and strain relief)
322-21-102
SMP50
Surface Mounting Plate for 750 Series
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
155
Portable Process Meters
M yr o n L T ech pr o II tm
The TechPro II is hand-held, lightweight and simple to operate. Measures Conductivity, TDS, pH,
and Temperature. These portable process analyzers are ideal for water treatment testing as well
as other industrial and commercial testing and applications. The rugged and water proof case
protects the electronics of the instrument and fits comfortably in your hand. This model also
features auto shut-off to prolong battery life.
Accurate readings in 2 easy steps:
Step 1 - Rinse and fill cell cup.
Step 2 - Push button to display reading.
Applications
Boilers & Cooling Towers
Reverse Osmosis
Water Treatment
Plating and Parts Washing
Paper & Printing Industry
Food & Beverage
Process Control
Specifications
Cell Capacities: pH; 0.04oz./1.2ml, Cond/TDS;
0.2oz./5.0ml
Display: 4 digit LCD
Dimensions: 7.7 x 2.7 x 2.5 in. (196 x 68 x 64 mm)
Operating Temperature: 32-132°F (0-55°C)
Weight: 11.2 oz. (320g)
Case Cell Material: ABS
Power: 9V battery
Battery Life: >100 hours/5000 readings
Protection Ratings: IP67/NEMA 6 Waterproof
Features and Benefits
Pr o c ess C o ntr o ls
156
•Long Life Internal electrodes to prevent breakage and
prolong the electrodes’ useful life.
•Auto shut-off to prolong battery life.
•Easy to Use.
•Waterproof and buoyant.
•Keypad calibration.
•Measures 0-14 pH.
•Full 4 digit display.
•Auto temperature compensation to 77°F (25°C).
PORTABLE PROCESS INSTRUMENT - TECHPRO
PART NUMBER
MODELPRODUCT
NUMBERDESCRIPTION
322-05-066
TP1
Conductivity, TDS, Temperature
322-05-067
TPH1
Conductivity, TDS, pH, Temperature
PARAMETERS
RANGESACCURACY
Model Conductivity
TDS
pH
Temp.
0-9999µS 0-9999 ppm
32-160ºF
TP1 _
(0-71ºC)
10-20.00µS
10-20.00 ppt
0-9999µS
0-9999 ppm
32-160ºF
TPH1 0-14
(0-71ºC)
10-20.00µS
10-20.00 ppt
800-633-3080 / www.mcpur.com / Mar Cor Purification
Conductivity/TDS
pH
Temp.
±1% _
±0.1°c/f
of reading
±1% of reading
+0.02 pH ±0.1°c/f
Portable Process Meters
M yr on L Ultrameter II TM
Measures TDS, pH, ORP, conductivity, resistivity and temperature all in one. This portable process analyzer
is fast and accurate. Both models are rugged enough for daily inline controller checks in hostile process
applications. Simplicity through engineering allows you to get immediate results.
Step 1: Rinse and fill the cell cup. Step 2: Push a parameter button. Step 3: Take the reading.
Features and Benefits
•Memory which easily stores and recalls up to 100 readings.
•Fully automatic temperature compensation.
•User adjustable temperature compensation (up to 9.99%/°C) which also allows TC to be
disabled for those applications requiring non-compensated reading.
•User adjustable conductivity/TDS conversion ratio for greater accuracy when measuring
solutions not contained in the microprocessor.
•Auto-shut off maximizes the life of the single 9V battery to more than 100 hours/5000 tests.
•The non-volatile microprocessor provides data back-up, even when the battery is changed.
This assures all calibrations and memory data will be retained.
•Extended life pH/ORP sensor is user replaceable in the field.
•Built-in IR Port allows you to conveniently download your data
to a computer (requires Myron L uDockTM accessory package).
Portable Process instrument - Ultrameter
•Real Time clock with Date & Time stamp allows you to
maintain the integrity of each individual reading.
Part MODELProduct
Number NumberDescription
•The large capacity KCI reservoir guarantees extended life.
•A custom LCD helps simplify calibration and operation by using
322-05-004
4PII
Conductivity, TDS, Resistivity, Temperature
annunciators and prompts to indicate various conditions.
322-05-006
6PII
Conductivity, TDS, Resistivity, pH, ORP, Temperature
Specifications (All Models)
mod e l f e a tur e s
4P II
Conductivity/TDS
Features
Resistivity/Temp
Autoranging
X
Adjustable Temp. Comp.
X
Adjustable cond./TDS ratio
X
Memory (100 readings)
X
Date & Time Stamp
X
pH Calibration Prompts
Low Battery Indicator
X
Auto-off
X
p a r a m e t e rs
pHORPConductivity
TDS
0-14pH
±999mV
0-9999 µs
0-9999ppm
Ranges
10-200mS
10-200ppt
in 5 autoranges
in 5 autoranges
Resolution
0.01pH
±1mV
0.01(<100 µs)
0.01(<100ppm)
0.1(<1000 µs)
0.1(<1000ppm)
1.0(>1000 µs)
1.0(>1000ppm)
Accuracy
±0.01pH ±1mV
±1% of reading
±1% of reading
Auto Temperature Compensation
0-71°C
32-160°F
Adjustable Temperature Compensation
Cond./TDS Ratios Preprogrammed
Adjustable Cond./TDS Ratio Factor
6P II
Conductivity/TDS/pH
Resistivity/Temp/ORP
X
X
X
X
X
X
X
X
ResistivityTemperature
10KOhm0-71°C
30MOhm
32-160°F
0.01(<100KOhm)
0.1(<1000KOhm)
0.01(>1MOhm)
±1% of reading**
0-71°C
32-160°F
0-71°C
32-160°F
0-71°C
32-160°F
0-9.99%/°C
KCI,442*, NaCl
0.20-7.99
0-9.99%/°C
0-9.99%/°C
p r o c ess c o ntr o ls
Display: 4 digit LCD
Dimensions: 7.7 x 2.7 x 2.5 in. (196 x 68 x 64mm)
Weight: 12.4 oz (352 g)
Case/Conductivity Cell Material: VALOXTM
(General Electric)
Cell Capacities: pH/ORP; 0.04oz./1.2ml,
Cond/TDS/Res 0.2oz./5.0ml
Power: 9V battery
Battery life: >100 hours/5,000 readings
Operating temperature: 32° to 132°F (0° to 55°C)
Protection ratings: IP67/NEMA 6
(waterproof to 3ft./1 meter)
0.1°C/F
±0.1°C
*442 Natural water standardTM Myron L Company
**10K½-10M½.
ORP = Oxygen Reduction Potential
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
157
Portable Process Meters
Myr o n L ds & dialysate meters
DS Meters are conductivity instruments which provide fast, accurate, on-the-spot
measurement of total dissolved solids. They help prevent equipment damage, assure
product quality, and verify in-line instrumentation. Dialysate Meters measure dialysate
concentration and deliver fast and accurate test results. Although light in weight and
compact in size, both meters are “tough“. Analog meters have 2-1/2” readouts. Highly stable
solid-state circuitry provides accurate readings.
Applications (DS Meters)
•Boilers/cooling towers •Deionized water systems
•Plating/surface finishing
•Printing solutions •Reverse osmosis
•Rinse water
•Waste treatment
•Electronics
Specifications (all models)
Calibration - Choice of parts per million (ppm)/TDS or
microsiemens (µs)/micromhos conductivity.
Accuracy - Analog models - ±2% full scale.
Repeatability - ±1%.
Temp compensation - Automatic (to 25°C) between
50° and 160°F (10° to 71°C).
Electrodes - Built-in, never need replatinizing.
Cell cup - Chip and crack resistant polyethylene.
Circuitry - Solid-state, sealed against moisture.
Batteries - One or two 9 volt supplied, good for 2000 tests/1 year.
Dimensions - 3.4”W x 4.5”D x 4.0”H.
Weight - one pound (0.45 kg).
M yron L P ortable M eters
Part Model
Number NUmber
Range(s)
532T1
This meter offers three ppm ranges. It features a unique
electronic Internal Standard for easy and fast field calibration
and range doubling.
EP-10
322-05-105 532M1 0-50, 0-500, 0-5000 µs
B,D,G
322-05-106 532T1 0-50, 0-500, 0-5000 ppm
B,D,G
322-05-107 EP-10
0-10, 0-100, 0-1000, 0-10,000 µs
K,M,O
322-05-108EP
322-05-109
D2
322-05-110
D1
0-0.5, 0-5, 0-50, 0-500, 0-5000 µs
0-10, 0-20 milliohms
11-15 milliohms
B,D,G
14.0
14.0
Pr o c ess C o ntr o ls
With its four micromhos ranges, this meter is ideal for most water treatment
applications. Its low range will accurately test boiler condensate; with the RE-10 Range Extender, it can check process solutions up to 100,000
micromhos.
EP
The most versatile of all DS meters, it is capable of testing ultra-pure and ocean waters* and everything in between.
It has five ranges. The most sensitive range includes resistivity equivalents, making it ideal for DI water systems.
D1 and D2
Dialysate meter features dual scales on the dial and can test both acetate and bicarbonate dialysate. Calibration
is easy and fast with 14.0 solution.
*With RE-10 Range Extender Accessory
M yron L P ortable M eter A ccessories
Part
Number
PK7
All conductivity and pH solutions used
in factory calibration are NIST traceable.
Model Number PK7 is used with a pDS
meter. It is foam-lined and molded of sturdy
ABS plastic.
158
Recommended
Standard
Solution
ModelProduct
NumberDescription
322-05-901
UCC
Ultrameter soft protective case with belt clip
322-05-902
PTP
Porta-Pak, portable DS meter carrying case, plastic
322-05-903
PK7
Porta-Kit, carrying case with standard/buffers for pDS
meter model EP11/pH only
322-05-921
pH 4-Q
pH 4 Buffer, quart
322-05-922
pH 7-Q
pH 7 Buffer, quart
322-05-923
pH 10-Q
pH 10 Buffer, quart
322-05-924
pH SS-Q
pH Sensor Storage Solution, quart
322-05-931
442-30-Q
B, Standard solution (30 ppm/47 µs), quart
322-05-933
442-300-Q
D, Standard solution (300 ppm/445 µs), quart
322-05-936
442-3000-Q
G, Standard solution (3000 ppm/3900 µs), quart
322-05-938
442-30,000-Q
I, Standard solution (30,000 ppm/30,100 µs), quart
322-05-940
KCI-70
K, Standard solution (70 µs/45 ppm), quart
322-05-942
KCI-700
M, Standard solution (700 µs/478 ppm), quart
322-05-944
KCI-7000
O, Standard solution (7000 µs/5687 ppm), quart
322-05-951
14.0
800-633-3080 / www.mcpur.com / Mar Cor Purification
Standard conductivity solution (14.0), quart
Water Quality Control
Water Leak Detec tor System
The Water Leak Detector System is designed to help prevent water damage or flood catastrophe connected with a water treatment system.
The Water Leak Detector System uses a remote surface sensor to detect nonflammable conductive liquids and is equipped with a solenoid
valve which is designed to close off the flow of incoming water. The system is complete with a controller that contains a local audible alarm
designed to alert the facility of the condition.
Features and Benefits
•Designed to protect against extensive water damage.
• Prevents Booster pump, all Pretreatment equipment,
and RO operation if activated.
• Flexible positioning of the surface sensor (1 sensor per system is included).
• Industrial style main shut-off valve available in either 1” or 1-1/2” FNPT.
• Easily added to an existing water treatment system.
• Controller Features:
• System power indicator lamp.
• Alarm active indicator lamp.
• Local alarm active horn.
• System OFF or AUTO selector switch.
• Screw terminals to connect external devices.
• Water tight, wall mount, composite enclosure.
Specifications
Water L ea k Dete c t o r System
Water Connection: 1-inch or 1-1/2-inch NPT
Power Connection: 120VAC outlet
Valve Power Connection: 24VDC wiring
Valve Material: Brass
Sensor: 25 ft cable
PART NUMBER
DESCRIPTION
INLET / OUTLET
3025647
Water Leak Detector System
1 inch
3026899
Water Leak Detector System
1.5 inch
313-07-218
Surface Sensor
N/A
Water Quality C ontr oller Pa c ka ges
These particular controller packages feature stand alone DI and Loop Conductivity (Final Quality) with remote alarms. There are also combo
controller packages that include both of these features. We also offer a RO divert controller for non-compliant existing RO machines. In
addition, these Controller Packages include all of the necessary parts to install the main control panel.
•
•
•
•
AAMI compliant.
Complete system package.
Standard, documented UL panel.
Local alarm, mute capability, keyed switch to silence in disinfect
mode.
•Remote alarm device, featuring 3 minute mute with 100ft plenum
rated cable.
•Factory wired and tested panel with few field connections.
•Additional fittings and instructions are included for complete
install.
•Single or Multiple wide range digital monitors.
•1 or 2 25ft sensor probes with cable.
•Industrial grade 3-way divert valve.
WAT E R QUA L I T Y CO N T R O L L E R PACK AG E S
PART NUMBER
DESCRIPTION
APPLICATION
NOTES
250-72-243
Kit, DI Controller with
remote alarm
DI Divert package for a
Water System
This kit includes a control panel, 115V plug with resistivity meter; probe; remote alarm; 100ft of 12/C remote wire; 5/C connector wire; 3-way DI divert
valve; valve connectors; misc. electric co nectors, O&M manual.
250-72-247
Kit, Loop Conductivity
and DI Controller with
DI remote alarm
DI Divert and Loop Conductivity package for an
RO Water System
This kit includes a control panel, 115V plug with conductivity and resistivity meter; (2) probes; remote alarm; 100ft of 12/C remote wire; 5/C connector wire;
3-way DI divert valve; valve connectors; misc. electric connectors, O&M manual.
250-72-251
Kit, Loop Conductivity
with remote alarm
Loop Conductivity package for an RO Water
System
This kit is for an RO Loop Piping as a way to measure the water quality in the
distribution system. It includes a control panel, 115V plug with conductivity
meter with local alarm; probe; remote alarm; 100ft of 12/C remote wire;
misc. electric connectors, O&M manual.
250-72-252
Kit, Loop Conductivity
with divert and remote
alarm
Loop Conductivity with
divert package for an RO
Water System
This kit is for an RO Loop Piping as a way to measure the water quality in
the distribution system and divert to drain when quality is unacceptable. It
includes a control panel, 115V plug with conductivity meter with local alarm;
probe; remote alarm; 100ft of 12/C remote wire; 3-way divert valve, valve
connectors, misc. electric connectors, O&M manual.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
p r o c ess c o ntr o ls
Features and Benefits
159
Water Quality Indicators
H y - L ite Resisti v ity I ndicator
The water quality indicator system with accuracy, alarm and control for deionized tanks up to 700 feet away. Easy to use green and red LEDs
continuously display the status of pure water quality relative to the set-point rating. Whenever the water is of acceptable purity, the green
light remains on. Should the purity fall below set-point, the red light flashes and the built in peizo alarm sounds. The alarm can be silenced by
pressing the membrane switch in the front label and will not resound until the next red light condition occurs.
Features and Benefits
•Accurate - Auto temperature compensation.
•Built-in alarm (non-alarm available). Visual and Audible alarm.
•Steady Green/Flashing Red LEDs.
•Output port for relay & remote alarm modules.
•Safe 12 VDC - 6 units per single transformer/outlet.
•Easy 1/2” or 3/4” installation.
•5 set-points available.
Specifications
Accuracy - ± @ 5-45°C.
Repeatability - ±1%
Temperature comp - Automatic to 25°C from 5-45°C (41-113°F).
Audible alarm - 70db peizo alarm with switch.
Circuitry - SMT. Input Power - 12VDC; 30 milliamps.
Transformer - Plug-in, class 2, UL & CSA approved, Input 110 VAC,
50-60Hz/Output 12 VDC @ 200mA integral 6ft. cable.
Materials of construction Wetted - 303 SS, ABS, Polypropylene, Viton®.
Non-Wetted - Enclosure/ABS; labels/polyester, chrome-mylar.
Operating pressure - 0-150psi.
Dimensions - overall length-6”, enclosure length-3”, width-2”,
overall height w/LED’s-2”.
Available set-points - (single fixed) 25, 50, 200 kilohm-cm @ 25°C
1, 2 megohm-cm @15°C (Call for other models).
Output to module connection - 4 wire, 26 ga, UL4110 telephone
cable w/FCC modular handset connectors.
H y - L ite W ater Q uality I ndicators
PartProduct
NumberDescription
318-02-460
HLA - Hy-Lite w/ alarm & output port,1 Meg
318-02-461
HLS - Hy-Lite silent w/ output port, 1 Meg
318-02-462
RMA - Remote alarm module
318-02-463
RMR - Relay module
318-02-410
HyTran-A - Transformer
318-02-412
HyPC - patchcord, 8 ft.
318-02-413
RPC - to remote module, cable -50 ft
318-02-414
RPC - to remote module, cable -10 ft
Process Controls
E c o n omi cal T est L ights
The RA 110 Test Lights are designed for low cost monitoring of water conductivity. Operation is simple: the neon lamp is on when the
conductivity is below the threshold value, the lamp turns off when the conductivity rises above. ResilitesTM is a positive, reliable, and economical
method of monitoring water quality via conductivity. Bright RED/GREEN visual output is easy to read. The monitoring is simple; green light
indicates the water conductivity is below the threshold value, red light warns that is it above.
General Info: The Resilite and Test Light monitor require that the water be flowing for greatest accuracy. Ions tend to migrate to the testing cell
and effect the reading if the water is not flowing.
Specifications - Test Light
Specifications Resilites
Accuracy - ±20%.
Accuracy - ±15%.
Thread - 1/2” NPT with o-ring.
Thread - 1/2” NPT with o-ring.
Electrode Material - Tungsten.Electrode Material - Tungsten.
Housing Material - ABS Gray.
Housing Gray - ABS Black.
Working PSI - 125 psi.
Working PSI - 125 psi.
Maximum Temp - 140°F.
Maximum Temp - 100°F.
E conomical W ater Q uality I ndicators
PartProduct
NumberDescription
ResistanceConductancePPM
318-21-103 RA 110 110V 200K ohm test light 200K
5
318-21-104 RA 110 110V 500K ohm test light 500K
2
1.0
318-21-105 RA 110 110V 1 Meg ohm test light
1 Meg ohm
1
0.5
318-22-103 RB110R 200K ohm remote test light
200K
5
2.5
318-22-105 RB110R 1 Meg ohm remote test light
1 Meg ohm
1
0.5
200K
5
2.5
318-23-106 110V 500K ohm Resilite
500K
2
1.0
318-23-107 110V 1 Meg ohm Resilite
1 Meg ohm
1
0.5
318-23-105 110V 200K ohm Resilite
160
800-633-3080 / www.mcpur.com / Mar Cor Purification
2.5
Injectors
M a z z ei ®
Mazzei Injectors are high efficiency, Venturi-type, differential pressure injectors. A pressure difference between the inlet and outlet of the
injector creates a vacuum inside the body, which results in suction through the suction port. The suction can then be used to inject and mix
water treatment chemicals into the water.
Mazzei Injectors have a unique and patented design that permits them to start suction
in most models when the outlet pressure is only 20% less than the inlet pressure. Full
suction capacity is reached when the pressure difference is approximately 50%. Because
of this high efficiency, operating costs are lower than less efficient systems which require
additional pumps for chemical injection.
Mazzei Injectors are trouble free as there are no moving parts or electrical connections, and
are molded from chemical resistant black PVDF (Kynar®), resulting in a long life expectancy.
Applications
•Agriculture - Irrigation systems, spray systems,
food processing.
•Industrial/Commerical.
•Water Treatment - Recirculating, waste water,
potable water systems.
I njectors - B lack P V D F ( K ynar ® )
•Washing & Cleaning - Car wash systems,
Part
Model Inlet/Outlet
Suction Port
Motive Flow thru
dishwashing equipment.
Numbernumber
MNPT (in.)
Size (in.)injector @ 50 psi
•Speciality Applications - To areate or mix
321-06-810 287
1/2
3/16 Hose Shank
0.9 GPM
liquids, saturate liquids, etc.
321-06-811 384
1/2
1/4 MNPT & 1/4 HS
2.1 GPM
Features and Benefits
•Trouble-free operation.
•Long life.
•Energy efficient.
•Efficient ozone mass transfer.
•Molded in black Kynar® PVDF.
•Chlorine and ozone resistant PVDF
Injection Cap.
Water (gph)
8
10
321-06-813
484-A
3/4
1/4 MNPT & 1/4 HS
3.4 GPM
17
321-06-815
684
3/4
1/4 MNPT & 1/4 HS
10.8 GPM
30
321-06-816
584
3/4
1/4 MNPT & 1/4 HS
6.4 GPM
25
321-06-817
878
1
1/2 MNPT & 3/8 HS
12 GPM
60
321-06-818
1078
1
1/2 MNPT & 3/8 HS
17 GPM
75
process controls
Vacuum Breakers
T herm op lastic
PLAST-O-MATIC® Series VBM
Features and Benefits
•Protects tanks from implosion during draining.
•Eliminates losses and danger caused by siphoning.
•Provides safety for your system.
•Patented diaphragm design.
•Self-sealing prevents fugitive emissions and liquids from
leaving system.
•Tru-Union design. Threaded connections are standard.
V acuum B reakers
P V C ( V I T O N ® , thd )
Part
Number
Size
(in.)
320-02-123
1/2
320-02-124
3/4
320-02-125
1
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
161
Pressure Regulators
T herm op lastic
PLAST-O-MATIC® Series PR
Allows users to convert varying or excessive upstream pressures to a pre-determined maximum
downstream pressure in systems handling corrosive or ultra-pure liquids.
Features and Benefits
•Designed to handle corrosive and ultrapure liquids with inlet pressure up to 150 psi at 75°F.
•Standard downstream pressure range - Series PR set at 5 to 50 psi.
•Poppet seat at valve orifice prevents sticking; double U-cup.
•Seals on internal shaft. Control spring is not in the liquid.
•Rolling diaphragm design assures sensitive operation.
•One-piece body construction eliminates internal leakage.
•Inlet and Outlet threads are FPT.
S eries P R - P ressure R egulators
PVC (EPDM seals)PVC (Viton® seals)
Part
Number
SizePart
(in.)Number
Size
(in.)
309-12-102
1/2 309-12-111
1/2
309-12-103
3/4 309-12-112
3/4
309-12-104
1309-12-113
1
B rass
Series U5B-LF
Series UB5 is a standard capacity water pressure
reducing valve with integral strainer. For commercial and industrial applications. Sizes 1/2” through
2”. Suitable for initial pressures up to 300 lbs.
Reduced pressure range 25-75 lbs. Set for 50 lbs.
Maximum temperature 160°F.
Features and Benefits
Pr o c ess C o ntr o ls
•Union inlet connection.
•Bronze body construction.
•Stainless steel integral strainer.
Brass Pressure Regulators
Part
Number
Size
(in.)
309-05-505
1/2
309-05-507
3/4
309-05-510
309-05-512
1
1-1/4
•Lead Free
•Renewable stainless steel seat.
•High temperature resistant diaphragm.
E c o n omi c al B rass
Series A-31
Type A-31 regulators automatically reduce a high pressure to
a lower pressure, and maintain it within reasonably close limits. Designed where space and cost limitations are important.
S m a ll B r a ss
P r e ssur e R e g ul a tors
Part
Number
309-06-502
•High quality forged brass bodies.
309-06-504
•Designed for initial pressures up to 300 psi, and delivery or
reduced pressures from 2 to 180 psi.
•Buna-N seats are standard, as are Buna-N diaphragms.
•Maximum temperature - 200°F.
•Two-way adjusting screw style valve w/ FNPT inlet/outlet (Style 1)
Features and Benefits
Size
(in.)
1/4
3/8
p lasti c
Features and Benefits
•Designed to regulate either air or water pressure.
•Equipped with Stainless Steel spring.
•Easy to clean and maintain.
Specifications
309-16-392
Maximum Inlet Pressure: 150 psi.
Temperature Range: 40º to 125ºF.
4 Port: 1/4” x 2, 1/8” x 2
162
800-633-3080 / www.mcpur.com / Mar Cor Purification
309-18-501 (not pictured)
0-25 PSI range, (Maximum
Supply Pressure: 300psi.)
4 Port: 1/4” x 4
Plastic Regulators
Part
Number
Size
(in.)
309-16-392
1/4
309-18-501
1/4
3027765
1/4
1234489
1/4
Pressure Switches
W ater Systems
Furnas 69 W Series
Furnas W series pressure switches provide time tested, reliable control for automatic water systems. The switch is
universally acceptable for use as original equipment on water well pumps or pumping systems. Its simple design
makes it easy to use for professionals and nonprofessionals alike.
Features and Benefits
• Corrosion resistant non metallic cover, NEMA 1.
• No wire looping. Straight thru wiring. Ample wiring room.
• UL listed file #14861, CSA certified file #LR36854.
• 1/4” FNPT bottom connection.
• Visible contacts 2 pole double break.
• No-drift pressure settings.
• Captive cover screw.
• Ground screws.
• Easy to adjust.
PRESSURE SWITCH, W-SERIES
MIN. CLOSE
MAX. OPENDIFFERIENTIAL
PART
STOCKCUT-INCUT-OUT
RANGE
NUMBER
NUMBER
(PSI)
(PSI)
(PSI)
FACTORY
SETTING
(PSI)
303-26-110
69WB5
5
80
15-30
303-26-111
69WB3
3
35
6-15
5-10
303-26-112
69WEC
10
70
13-30
20-40
303-26-121
69WD5
5
80
15-30
30-50
303-26-122
69WD2
1
12
3-5
3-7
303-26-123
69WD3
3
35
6-15
5-10
303-26-136
69WA4Z
5
65
15-30
20-40
CUT-OFFCUT-OFF
PART
STOCK ADJUSTABLEADJUSTABLE
STATIC
Number
Number
MIN. (PSI)
MAX. (PSI)
(PSI)
30-50
FACTORY
SETTING
(PSI)
303-26-151
69WC7
3
20
12
150
303-26-153
69WC7B
3
20
12
150
F V1 0 0 0 Series
The FV1000 Series flow velocity meter is a durable lightweight device designed to measure the flow of water in a piping system in feet per second.
Features and Benefits
p r o c ess c o ntr o ls
Flow Velocity Meters
• 2 sizes with a wide flow range
• LCD display for clear readout
• Battery operated (Lithium - approx. 9,000 hours)
• No user adjustment required
• Vertical or horizontal mount configuration
• Schedule 80 PVC makes it compatible with most piping systems
• Easy to install with union socket ends
• Includes complete installation instructions
• Assist in complying with AAMI guidelines
• Compatible with 1% Minncare Cold Sterilant disinfectant solution
FV1000 SERIES FLOW VELOCITY METERS
Part NUMBER
MODEL NUMBER
unit SIZe
(IN)
FITTING
TYPE
3024613 FV1000-100
0.75 Schedule 80
3024614 FV1000-050
1
Schedule 80
3026656 Replacement Battery, Lithium
FLOW RANGE
2-20 GPM
5-50 GPM
PRESSUREOPERATING
SHIPPING
ACCURACY RATING
Temperature
WEIGHT
+3.0% 150 PSIG @ 73ºF +32ºF to +140ºF (0ºC to +60ºC) 0.88 lbs. (0.39 kg)
+3.0%
150 PSIG @ 73ºF +32ºF to +140ºF (0ºC to +60ºC) 1.0 lbs. (0.45 kg)
Note: Wetted Materials for all Models are: Housing=PVC, Bearings=Ceramic, Shaft=Tungsten Carbide, Rotor=PVDF, and Rings=316 SS.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
163
Level Switches
Tank M o u nt
Economical Float Type
These low-cost units are ideal for high volume use in small tanks and vessels. Engineered plastic construction offers broad compatibility in water, oils and chemicals.
Specifications
•Mounting - Horizontal.
•20 VA Switch SPST. #22 AWG Lead Wire Gauge, TPE.
•Switch Operation - Depending on the mounting position, the float on these switches
can either rise or lower with the liquid level. By rotating the switch 180°, the switch operation can be Normally Open or Normally
Closed. Arrows on exterior of mounting indicate N.O. when pointing up.
•Approvals - All LS-7 Series switches are U.L. Recognized - File No. E45168, and are CSA Listed-File No. 30200.
•Type 7 Mounting - External mounting (Thread x Thread).
•Type 10 Mounting - External mounting (mounts through and seals non-thread holes using a Buna-N compression gasket).
Part
NUMBER
T ank M ount - E conomical F loat T ype
Model Number
Mouting Type
Materials
Min. Liquid Operating Operating Sp. Gr.
TemperaturePressure, Max.
Float Arc
Envelope
314-01-001
160450
7
Polypropylene
0.55
-40°F to +225°F
100 PSI @ 70°F
1.50
314-01-003
165800
10
Polypropylene (20% Glass)
0.55
-40°F to +225°F
50 PSI @ 70°F
2.08
Tank M o u nt
Float Type
L-21N series unit has a Large Differential which provides immunity to nuisance switch
tripping due to severe wave action and turbulence. Large Differential also provides very
low cost single point pump up/pump down level control. Model L-21 is ideal for make-up
water level control in cooling towers, plating and washing tanks, fish farms, fountains and
aquariums.
Pr o c ess C o ntr o ls
Specifications
•15 amp 120/240 VAC SPDT switch capacity.
•Temperature to 200°F continuous at 75 psig.
•Pressures to 250 psig at 75°F.
•G.E. Noryl® Polyphenylene Oxide (PPO) with 10% glass fiber. 316 Stainless hardware
wetted surfaces.
•Grommet size - for cable O.D. 0.37 in.
•Working Fluid Specific Gravity - 0.7 Min.
•Insertion Thread Size - 1 1/4” NPT.
T ank M ount - F loat T ype
Level
PartDifferential
Number
(in.)
ME30118
1
314-07-002
2
314-07-004
5
A d j ustable M ou nt
Economical Float Type
This unique float level switch provides an economical means of controlling fluid levels. The
On/Off differential is set by adjusting the length of cable which the weight is allowed to
float. This makes this float completely adjustable unlike the tank mount styles. Has built-in
liquid tight cord grip and is environmentally safe (no mercury).
Specifications
•Construction Materials Cable - SJOW-A
Float - Polypropylene
•Switch Differential (degrees) - 90
•Cable Termination - Leads
164
800-633-3080 / www.mcpur.com / Mar Cor Purification
A djustable M ount - E conomical F loat T ype
Part Product
Number
description
314-04-003
Float, Adjustable, 30 ft cable, 13 amp
314-04-050
Tilt Float weight, PVC shell
Flow Sensors
FS- 5 0 0 S eries
Flow Switch
The FS-500 offers flow monitoring with a variety of switch actuation points and low pressure
drop. All wetted parts are polypropylene or stainless steel, making this switch ideal for a
wide range of chemical and temperature requirements. The materials are also NSF or FDA
approved for potable water treatment applications including chlorinators, purifiers and
heaters. The FS-500 is ideal for equipment cooling including welders, lasers, etc.
Specifications
•Flow rate settings - 0.25 GPM to 5.0 GPM.
•Port size - 3/4” NPT.
•Primary Construction Material - Polypropylene.
•Setting type - Fixed.
•Wetted Materials Housing, Bonnet, Shuttle, Shuttle Cap - Polypropylene,
(Hydrolytically Stable).
O-Ring - Viton® or Buna N.
Spring - 316 SS.
Retaining Clip - PH 15-7 Mo Stainless Steel.
•Operating Pressure, Maximum - 100 PSIG @ +70°F; 50 PSIG @ +180°F.
•Operating Temperature, Maximum - 212°F (100°C).
•Set Point Accuracy - ±20%
•Set Point Differential - ±20% maximum.
•Switch - SPST, N.O. Pilot Duty 20 VA, 120-240 VAC or VDC.
•Inlet/Outlet Ports - 3/4” Female NPT.
•Electric Termination - Pilot - No. 22 AWG, 24” Zip Cord Lead Wires.
F S - 5 0 0 S eries
FLOW SWITCH
Part Number
Switch Actuation
Set Point GPM
313-05-001
0.25
313-05-002
2
313-05-003
5
R FO S E R I E S
Flow Rate Monitoring
Specifications
•4.5 to 24 VDC Pulsed Output.
•Wetted Materials Body - Polypropylene (Hydrolytically Stable, Glass Reinforced).
Rotor Pin - Ceramic.
Rotor - Nylon Composite, Black; or PPS Composite, Black.
Lens - Polysulfone.
O-Ring - Viton® (Alloy Bodies); Buna N (Polypropylene Body).
Low Flow Adaptor - Glass Reinforced Polypropylene.
•Operating Pressure, Maximum - Polypropylene Body - 100 PSIG @ 70°F,
40 PSI Max. @ 212°F.
•Operating Temperature, Maximum - 212°F (100°C).
•Electronics - 150°F (65.5°C) Ambient.
•Viscosity, Maximum - 200 SSU.
RFO SERIES
•Input Power - RFO Type - 4.5 VDC to
24 VDC.
FLOW RATE MONITORING
•Current Consumption PartPort Size Flow Ranges - GPM
RFO Type - 8 mA, No Load.
Number
NPT
Low Range (Accuracy)Standard Range (Accuracy)
•Current Source Output, Max. - 70 mA.
313-07-002
.25”
0.1 to 1.0 (+/-7.0%)0.5 to 5.0 (+/-7.0%)
•Frequency Output Range - 25 Hz
(Low Flow) to 225 Hz (High Flow).
•Electrical Termination - 22 AWG
PVC-Jacketed, 24” Cable, Color Coded.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
p r o c ess c o ntr o ls
The RotorFlow’s paddlewheel design works by combining high visibility rotors with solid-state electronics that are packaged into compact,
panel mounting housings. They provide accurate flow rate output with integral visual confirmation — all with an unprecedented price/performance ratio. Applications include water purification/dispensing systems, chemical metering equipment, lasers and welders, water injection
systems, semiconductor processing equipment, chillers and heat exchangers.
165
Electrical Supplies
L amp s
Both incandescent and LED lamps are available in a vast array of configurations and performance characteristics. Because of their
unique light output, both are a preferred light source for backlighting, illumination, and indication. All are designed to withstand the
industries most demanding process, environmental, and reliability requirements.
I ncandescent L amps
Part
Number*
TYPE/
BODYVolts
Amps
Average
Life Hours
Lamp
Size
250-18-101
755
6.3
0.150
20,000
T-3 1/4
250-18-102
8-3995
130
0.200
2,000
T-3 1/4
250-18-103
1819
28
0.040
3,000
T-3 1/4
250-18-104
1815
14
0.200
3,000
T-3 1/4
250-18-105
388
28
0.040
10,000
T-1 3/4
PART NUMBER
TYPE/
RATED BODYVOLTAGECOLOR
LED LAMPS
*Sold in packages of 10.
Note: 1819 is standard in most Mar Cor Purification control
panels. 388 is standard in most Mar Cor Purification remote
alarm panels.
AVERAGE
LIFE HOURS
250-18-700
1819
24
White
100,000
250-18-701
1819
120
White
100,000
250-04-001
388
250-04-002
388
24Green
24/28
White
100,000
100,000
Plu g s & Conne ctors
Hospital Grade & Twist-Lock®
Heavy-Duty Straight-Blade and Hospital Grade Plugs and Connectors
are for applications where constant handling or harsh environments are
commonplace. Hubbell’s premier line of Insulgrip® devices. All plugs are
black and white.
Features and Benefits
•Nylon housing is impact- and chemical-resistant.
•Comes with combination Phillips/slotted screws.
•Unique cord clamp design prevents strain on wiring terminals.
Pr o c ess C o ntr o ls
H e a vy - D uty P lu g
Part
Number
Model
NEMAPoles/Wires
NumberPlugConfig AmpVoltGrade
(p/w)
250-05-921
HBL8215C
Straight
5-15P
15
125
Hospital
2 p/3 w
250-05-931
HBL4720C
Twist-lock
L5-15P
15
125V
Hospital
2 p/3 w
Straight Blade Plug
H eavy - D uty C onnector
Part
Number
Model
NEMAPoles/Wires
NumberPlugConfig AmpVoltGrade
(p/w)
250-05-923
HBL8219C
Straight
5-15R
15
125
Hospital
2 p/3 w
250-05-951
HBL4729C
Twist-lock
L5-15R
15
125V
Hospital
2 p/3 w
Twist-lock plug
Electrical Parts, cords & wire
M I S C E L L A N E O U S electrical parts
166
electrical cords & wire
Part Product
Number
description
Part Product
Number
description
250-05-727
3/8” Strain Relief
250-05-309
14/3, SJ00W Cord, 300V
250-05-723
1/2” Strain Relief, SM
250-05-311
12/4, SJ00W Cord, 300V
250-05-728
1/2” Strain Relief, LG
250-05-404
4/C Plenum wire
250-05-655
14/3 Power cord with molded plug
250-05-410
10/C Plenum wire
250-05-961
GFCI Cord Unit
250-05-412
12/C Plenum wire
250-09-110Electronic Timer switch 250-05-502
2/C Conductor wire
250-09-116
250-05-505
5/C Conductor wire
250-05-506
6/C Conductor wire
Artisan 438USA, In-line Timer
800-633-3080 / www.mcpur.com / Mar Cor Purification
Electrical Supplies
Fu ses
Time Delay, Ceramic-Body
Short-circuit protection of motors, small transformers and signal lamp circuits with these time-delay, cermaic-body fuses. Sold individually.
Specifications
•Dimensions - 1/4” x 1-1/4”.
•Voltage - 250 V.
•Construction Ceramic Tube;
Albaloy plated brass
end caps.
•Agency Approvals UL Listed,
CSA Certification.
Time Delay, Class Cc
T ime D elay , C eramic - B ody F uses , 2 5 0 V
Part
Fuse Bussman
Number Amps
No.
LittlefuseGould
No.
No.
250-13-112 500ma
MDA-1/2
326-1/2
GSA-1/2
250-13-115 750ma
MDA-3/4
326-3/4
GSA-3/4
250-13-117
1A
MDA-1
326-1
GSA-1
250-13-120
1.5A
MDA-1 1/2
326-1 1/2
GSA-1 1/2
250-13-123
2A
MDA-2
326-2
GSA-2
250-13-125
2.5A
MDA-2 1/2
326-2 1/2
GSA-2 1/2
250-13-127
3A
MDA-3
326-3
GSA-3
250-13-130
4A
MDA-4
326-4
GSA-4
250-13-132
5A
MDA-5
326-5
GSA-5
250-13-133
6A
MDA-6
326-6
GSA-6
250-13-134
7A
MDA-7
326-7
GSA-7
250-13-135
8A
MDA-8
326-8
GSA-8
250-13-136
10A
MDA-10
326-10
GSA-10
250-13-137
12A
MDA-12
326-12
GSA-12
250-13-138
15A
MDA-15
326-15
GSA-15
250-13-139
20A
MDA-20
326-20
GSA-20
250-13-140
25A
MDA-25
326-25
GSA-25
250-13-141
30A
MDA-30
326-30
GSA-30
T ime D elay - C C 6 0 0 V M idget F uses
Greater time delay than other Class CC fuses, superior motor starting ability,
greater reliability and branch circuit protection. 200K amp interrupting rating.
Specifications
LittlefuseGould
No.
No.
250-13-511
1/2
LPCC-1/2
CCMR-1/2
250-13-513
1
LPCC-1
250-13-517 1-1/2 LPCC-1 1/2
250-13-520
2
LPCC-2
250-13-522 2-1/2 LPCC-2 1/2
250-13-524
3
LPCC-3
250-13-526 3-1/2 LPCC-3 1/2
250-13-527
4
LPCC-4
250-13-529
5
LPCC-5
250-13-534 7-1/2 LPCC-7 1/2
ATDR-1/2
CCMR-1ATDR-1
CCMR-1 1/2 ATDR-1 1/2
CCMR-2ATDR-2
CCMR-2 1/2 ATDR-2 1/2
CCMR-3ATDR-3
CCMR-3 1/2 ATDR-3 1/2
CCMR-4ATDR-4
CCMR-5ATDR-5
CCMR-7 1/2 ATDR-7 1/2
250-13-535
8
LPCC-8
CCMR-8ATDR-8
250-13-537
10
LPCC-10
CCMR-10ATDR-10
250-13-538
12
LPCC-12
CCMR-12ATDR-12
250-13-539
15
LPCC-15
CCMR-15ATDR-15
Time Delay, Dual Element, Class Rk-5
250-13-541
20
LPCC-20
CCMR-20ATDR-20
High interrupting rating and time delay make the RK-5 the most popular fuse
for motor branch circuits and motor starting. It can carry 500% of rated current for 10 seconds. Moisture-resistant bodies make it suitable for general
purpose protection. 200K amp interrupting rating.
250-13-542
25
LPCC-25
CCMR-25ATDR-25
250-13-543
30
LPCC-30
CCMR-30ATDR-30
Specifications
•Dimensions - 2” x 9/16”.
•Voltage - 250 VAC / 125 VDC.
•Agency Approvals - UL Listed,
Class RK5; CSA certified.
p r o c ess c o ntr o ls
•Dimensions - 13/32” x 1-1/2”.
•Voltage Rating - 600 VAC (or less),
300 VDC.
(1/2-2-8/10A & 20-30A).
•Construction - Fibre Tube
•Agency Approvals - UL Listed, Class CC;
CSA certified.
Part
Fuse Bussman
Number Amps
No.
T ime D elay , C lass R K - 5 F uses - 2 5 0 V
Part
Number
Fuse Bussman
Amps
No.
LittlefuseGould
No.
No.
250-13-630
10
FRNR-10
FLNR-10
TR10R
250-13-631
12
FRNR-12
FLNR-12
TR12R
250-13-633
15
FRNR-15
FLNR-15
TR15R
250-13-635
20
FRNR-20
FLNR-20
TR20R
250-13-636
25
FRNR-25
FLNR-25
TR25R
250-13-637
30
FRNR-30
FLNR-30
TR30R
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
167
Electrical Supplies
M ot or Starters
Motor starting switches for manual “on-off” control of AC single and three
phase motor loads where overload protection is not required or is provided
separately. Excellent for industrial, hospital, agricultural and factory applications. UL Listed, CSA Certified. Available with or without the enclosures. 600
VAC. Enclosures provide compliance with OSHA lockout/tagout.
H eavy - D uty A C M anual M otor C ontrollers
Part
Number
Mfr’s #
Type
Switch
AmpPhase
250-03-101
HBL7832
2-Pole Motor Starting Switch
30
Single
250-03-102
HBL1392
2-Pole Switch w/plastic indoor (Type 1) enclosure
30
Single
C onta ct ors
Contactors are used to electrically turn on or off high current, non-motor loads or
in motor circuits where overload protection is separately provided. Compact sized
contactors are ideal for control panels and machinery. AC and DC coil controlled. A
variety of options and features are available.
C ontactors
Process Controls
PartProductUsed in
NumberDescriptionPhase
RO Machine
250-07-315
AB, 100-C16J10 24VAC operated contactor
3
5HP/208V
250-07-316
AB, 100-C12J10 24VAC operated contactor
3
3HP/208V
250-07-324
AB, 100-M09NZD3, 3-Pole 120VAC operated contactor
3
N/A
250-07-325
AB, 100-M09NZ243, 3-Pole 24VDC operated contactor
3
N/A
250-07-329
OMRON, G7L2ABUBJCB 24VDC power relay contactor
N/A
N/A
250-07-332
MAGNECRAFT, W199AX14 2P 120V power relay contactor
N/A
N/A
250-07-333
MAGNECRAFT, W199AX15 2P 240V power relay contactor
N/A
N/A
250-07-336
AROMAT, JA1C-TM-DC24V power relay contactor
N/A
N/A
Ov erlo a d Relays
193 EA/ES Series is a self-powered solid state overload relay that provides advanced motor protection when compared to traditional bimetallic
overload relays. Offers motor overload protection, standard manual operated trip function, visible trip indicator and isolated N.O. alarm contacts.
Connects with AB contactors.
O v e rlo a ds
PartProduct
NumberDescription
168
Range
250-08-101
193-ED1CB
1 to 5 AMPS ACC
250-08-103
193-T1BC30
18 to 30 AMPS AC
3024186
193-ED1EB
5.4 to 27 AMPS AC
800-633-3080 / www.mcpur.com / Mar Cor Purification
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
S t o ra g e T an k s & a c c ess o ries
Storage Tanks & Accessories
169
Storage Tanks
T E R R A PU R E ®
Designed for the purest process waters or chemistries, the onepiece capsule shape design provides for complete drainage. A Viton® gasketed 6” screw lid maintains nitrogen blanket pressure.
Unique, “no profile” fittings assure no internal tank protrusions
to collect particles, and no crevices, welds or seams to support
microbial growth.
One-piece rotationally molded construction yields a rugged,
seamless, corrosion free container suitable for an almost unlimited number of solution, storage and dispensing applications.
The all-plastic, artfully engineered pedestal is molded entirely of
LPE (no metal reinforcement). This unique tank stand is capable
of supporting loads up to 4000 lbs. A convenient “mousehole”
provides easy access to the bottom center fitting.
Applications
•Ideal for DI, RO water
•Pharmaceutical
•Semi-Conductor
•Biotech
•Laboratory
•Hospital
•Clinical Analysis
Features and Benefits
•Totally enclosed.
•Gas-tight for nitrogen blanketing, no atmospheric intrusion.
•190°F capability, steam-cleanable, hot DI.
•34” diameter, fits through standard doors.
•Capsule design for complete drainage.
•Custom sizes available.
•All materials comply with FDA regulations.
terrapure tank
•“No profile” fittings, no microbial growth niches.
PartProduct
Specifications
S t o ra g e T an k s & a c c ess o ries
170
•Tank, fittings, pedestal - Linear Polyethylene (LPE).
•Closure - High Density Polyethylene (HDPE).
•Gaskets - Viton® fluoroelastomer.
•6” Top opening.
•Maximum temperature 190°F.
•Overall size:
125 gal. tank w/pedestal
- 59”H x 38 1/2”W
250 gal. tank w/pedestal
- 96”H x 38 1/2”W
•WHC = Welded Half Coupling PE
Note: Tanks do not come vented.
All tanks must be vented. See filter
section for vent filters and housings.
Other fittings are available upon request.
NumberDescription
Complete Tank System. Ideal for pure water applications
ME14894
125 gallon Terrapure tank with PE stand, gallon indicator, (1) 2” WHC bottom center, (5) 1-1/2” WHC sides (top, 2 high, mid, low), (3) 3/4” WHC top, (1) spray nozzle with 1/2” WHC through tank lid.
ME14895
250 gallon Terrapure tank with PE stand, gallon indicator, (1) 2” WHC bottom center, (5) 1-1/2” WHC sides (top, 2 high, mid, low),
(3) 3/4” WHC top, (1) spray nozzle with 1/2” WHC through tank lid.
Complete tank system. Ideal for holding liquids or concentrates
200-01-101
125 gallon Terrapure tank with PE stand, gallonage tape, (1) 1” WHC
bottom center
1232542
Accessories
250 gallon Terrapure tank with PE stand, gallon indicator, (1) 1-1/2”
WHC bottom center
200-01-021Gallonage Tape for 125 tank
200-01-022Gallonage Tape for 250 tank
200-01-031
200-01-032
200-01-033
800-633-3080 / www.mcpur.com / Mar Cor Purification
Cap, 6”, PE, Blue with o-ring, viton®
Cap only, 6”, PE, Blue
O-ring, Viton®
Storage Tanks
Clo se d - Top Cone B otto m tank
Incorporates an all high-density polyethylene concept for greater corrosion resistance, less
maintenance and lighter weight. Designed to handle contents that have a maximum specific
gravity of 1.5 at 73°F. No metal stands to maintain. Molded calibrations, excellent chemical
and impact resistance. FDA approved materials. UV resistant. Maximum temperature 140°F.
Manway on all sizes.
Features and Benefits
•Molded of rugged, high-density polyethylene.
•Impact and chemical resistant.
•Polyethylene stands.
•Manufactured with FDA approved materials to ensure safe storage of potable water.
•Premium weight.
•Tanks are white. Stands are black.
•Angle of incidence is 30°.
•All tanks come with 1-1/2” PP bottom drain bolted flange, EPDM gasket with anti-vortex cap.
C losed - T op C one B ottom tank
PartCapacityDiameter Height
Number (gallons)
(in.)
(in.)
Manway
(in.)
Installed
Fitting
3024674
300
48
60
16” - VENTED
1-1/2” FNPT
3024675
500
48
85
16” - VENTED
1-1/2” FNPT
3024676
1050
72
85
16” - VENTED
1-1/2” FNPT
3024677
300
48
60
16” - NON-VENTED
1-1/2” FNPT
3024678
500
48
85
16” - NON-VENTED
1-1/2” FNPT
3024679
1050
72
85
16” - NON-VENTED
1-1/2” FNPT
Note: Dimensions and capacity may vary slightly.
H o ri z o ntal L eg tan k
These horizontal leg tanks are made of polyethelene, and are designed for above ground service only. The three dimension tanks are measured by diameter x length x height. Note: Bands
are recommended for mobile applications.
Features and Benefits
S t o ra g e T an k s & a c c ess o ries
•One piece molded linear polyethylene.
•Natural translucent white for visibility.
•Molded calibration scale.
•Molded in support bases for tank stability.
•Ideal where height restrictions apply.
H orizontial L eg T ank
Tank
NominalDiameter x PartCapacity
Length x Height
Number
(gals.)
(in.)
Approx.
Weight
(lbs.)
Approx.
Thickness
(in.)
Tank
Lid
(in.)
200-19-121
35
20 x 29 x 23
15
3/16
5
200-19-122
65
23 x 43 x 29
25
3/16
5
200-19-123
125
32 x 41 x 35
45
3/16
8
200-19-124
225
38 x 49 x 48
60
3/16
8
200-19-125
325
38 x 68 x 44
90
1/4
16
200-19-126
525
49 x 71 x 55
120
1/4
16
Note: Tank dimensions are approximate.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
171
Storage Tanks
C ommercial Vertical B u l k tan k
Vertical storage tanks are most frequently used for bulk storage and mobile nursing applications. Vertical storage tanks are flat bottom with a domed top. Tanks are of premium weight. No bulky stand required.
Features and Benefits
•Tie-down slots.
•Built-in graduated gallonage indicators.
•Offset fill-well with polypropylene black cover.
•Manufactured with FDA approved materials.
•1.5 specific gravity.
commercial vertical bulk tank
PartCapacityDiameterHeight Manway Installed
Number
(gals.)
(in.)
(in.)
(in.)
Fitting
200-07-102
105
23
63
8
no
200-07-103
165
31
55
16
no
200-07-104
300
36
78
16
no
200-07-106
500
48
72
16
no
200-07-107
750
48
102
16
no
200-07-108
1000
64
79
16
no
Note: All tanks are vented. Tank fittings are available on page 167.
Dimensions and capacity may vary.
in d u strial Verti c al B u lk tan k
Manufactured from linear polyethylene in a one piece, seamless construction, this tank series is designed for either indoor or outdoor applications. Translucent for convenient product level viewing. Flat bottom design provides for easy and cost efficient installation. Industrial Series is
designed to handle contents that have a specific gravity of 1.9 at 73° F.
Features and Benefits
S t o ra g e T an k s & a c c ess o ries
172
•Excellent chemical and impact resistant.
•Resin complies with U.S. FDA regulation
21 CFR 177.1520 (c) 3.1 and 3.2.
•54 sizes: 45 gallons to 12,000 gallons.
•Molded in calibrations.
•UV stabilized for outdoor use.
•Most sizes are available with molded-in
tie down slots.
•1.9 specific gravity.
•No stand required.
industrial vertical bulk tank
PartCapacityDiameter HeightManway Installed
Number
(gals.)
(in.)
(in.)
(in.)
Fitting
200-09-104
65
23
42
8
no
200-09-108
130
23
76
8
no
ME41612
165
31
58
8
no
200-09-111
300
35
81
16
no
200-09-113
500
46
76
16
no
ME42130
750
46
119
16
no
Note: All tanks are vented. Tank fittings are available on page 167.
Dimensions and capacity may vary.
800-633-3080 / www.mcpur.com / Mar Cor Purification
Storage Tanks
R ec tan g u lar Storage Tan k
Small rectangular tanks made of heavy duty polyethylene come in a variety of shapes and sizes. They
are open top tanks with loose PE covers that can be ordered separately. Not for fuels or oils. All tanks
greater than 18” should have simple bracing of angle iron. Other sizes are available. Please call for
details.
Features and Benefits
•Operating temperature is 140°F for continuous service.
•Wall thickness is approx. 5/10”.
•Translucent for viewing levels.
•UV stabilized.
S mall S torage T ank - P E H eavy D uty
Tank Part
Number
StockCapacity
Number
(gals.)
Length
(in.)
WidthDepthCover Price
(in.)
(in.)
Number
Stock
Number
200-13-102
6301
10
12
12
18
200-13-501
6350
200-13-103
6302
15
12
12
24
200-13-501
6350
200-13-107
6305
15
18
12
18
200-13-503
6354
200-13-108
6306
20
18
12
24
200-13-503
6354
200-13-111
6316
51
18
18
36
200-13-504
6362
Storage Tank Accessories
Tank F ittings
P V C B ulkhead F ittings
FPT x FPT
Part
Number
Size
(in.)
400-34-001
1/4
400-34-002
3/8
400-34-003
1/2
400-34-004
3/4
400-34-005
1
400-34-006
1 1/4
400-34-007
1 1/2
400-34-008
2
400-34-009
3
N atural P olypropylene
B ulkhead F ittings F P T x F P T
PartPipe
Number
(in.)
410-34-003
1/2
410-34-004
3/4
410-34-005
1
410-34-006
1 1/4
410-34-007
1 1/2
410-34-008
2
Mar Cor Puri f i cati on / www.mcpur.com /
S t o ra g e T an k s & a c c ess o ries
Bulkhead fittings are available as an economical way to install
tank penetrations. Choose from either PVC or Natural Polypropylene styles. All bulkhead fittings are threaded on both sides for
added convenience. NSF approved. EPDM gaskets are standard;
other materials are available. Price does not include installation.
Installation can be provided at a nominal charge.
800-633-3080
173
Storage Tank Accessories
T an k c overs
Covers provide an economical means for quick top access for filling or for inspection of contents. Sizes range from 16” to 22”, vented and
unvented. Note: All tanks must be vented. Please see our filter and membrane sections for air vent filters.
C ov e rs
Part
product
NumberDescription
200-81-009
16” threaded plain cover, non vented
200-81-010
16” threaded plain cover, vented
200-81-011
22” threaded plain cover, non vented
R otatin g Sp ray Noz z les
This rotating spray nozzle provides true 360 degree spray coverage in a very compact assembly. The
bearing mechanism is self-lubricating and self-cleaning. This nozzle can be installed in any orientation
and is effective in vessels up to 3 meters (10 feet) in diameter.
Applications
•Keg washing
•Carboy/jug washing
•Spray tank washing
•Small tank rinsing
•Machine Clean-In-Place (CIP)
•Barrel washing/rinsing
Features and Benefits
•Easy disassembly/assembly and cleaning.
•FDA approved materials.
•Standard FNPT connections.
R otating N ozzles
PartmodelPipe Size
Number
Number
FNPT (in.)
Specifications
Standard nozzle body material is stainless steel with a polypropylene
nozzle ball. Nozzle balls are also available in 316 SS, PVDF (Kynar®), and
PTFE. Other body and ball materials are available upon request. The maximum recommended operating pressure is 100 psi at 180°F.
Spray Coverage
(degree)
210-02-001
1/4TWK36050
1/4
360
210-02-004
3/8TWK36075
3/8
360
210-02-007
1/2TWK360100
1/2
360
210-02-010
3/4TWK360180
3/4
360
Station Wall Boxes
S t o ra g e T an k s & a c c ess o ries
S tati on W all B oxes
These boxes are designed to provide effective containment of dialysis machine connections. It serves as a work station for each individual patient
treatment area, which conveniently can accept fittings for water, acid concentrate and bicarbonate for efficient central distribution. This keeps the
dialysis work area free from leakage and corrosion. Mar Cor Purification offers a variety of wall box configurations. These boxes are made with
corrosion-free materials, are durable, are easy-to-clean and are attractive in any dialysis setting. Each box includes built-in drain fitting connection
for easy installation to the main waste line. Due to the variety of available configurations, please contact Mar Cor to obtain a quote for a complete
station wall box for your project.
S tation wall boxes
PartOutside
NumberDescriptionDimensions (in.)
DW-DS-WB-01
Custom PE station wall box, 1-1/2” drain, beige
Note: Ports and other fittings are not included in the price. Dimensions are approximate.
S tation wall box accessories
Part
NumberDescription
174
17-1/2 x 17 x 6
3024550
3024587
Label, Card, Wall Box
Label, Card, Wall Box, Concentrate
800-633-3080 / www.mcpur.com / Mar Cor Purification
Pressure Tanks
R omate TM Vessels
The high-performance, high-value vessels are commonly used for commercial and industrial
applications. Designed exclusively for reverse osmosis permeate water. These pure water
storage vessels are ideal for continuous draw requirements.
Features and Benefits
•100% nonmetallic, seamless vessels will never chip, rust, dent, or leak.
•Removable air cell allows for easy service and sanitization, or replacement as needed.
•All materials used in construction are FDA-approved.
•Have the ability to discharge in any position.
•Romate 4 is rated for 100 psig maximum operating pressure; 100º F maximum operating
temperature.
•Larger systems are rated for 125 psig maximum operating pressure; 120º F maximum
operating temperature.
•RO4 - Polypropylene shell.
•RO15 - RO80 - Polyethylene inner shell, fiberglass exterior.
R O M A T E commercial
Part
ModelCapacityDia x Hgt
SYSTEM
Weight Max. Oper.
NumberDESCRIPTION (gal)
(in.)Connection (lbs.)
(psi)
200-25-382
ROMATE 4
3.6
9 x 20
1/4” MNPT
8
100
200-25-383
ROMATE 15
14.5
16 x 27
1” MNPT
15
125
200-25-384
ROMATE 20
19.8
16 x 33
1” MNPT
19
125
200-25-385
ROMATE 30
29.5
16 x 44
1” MNPT
23
125
200-25-386
ROMATE 40
40.3
16 x 57
1” MNPT
30
125
200-25-387
ROMATE 80
86.7
25 x 56
1 1/4” MNPT
58
125
Note: All vertical designed tanks.
Maximum operating temperature is 120ºF for models except for the ROMATE 4 (100ºF).
Dimensions and weights may vary slightly.
S t o ra g e T an k s & a c c ess o ries
Looking For
Pressure Gauges?
See pages 148-149
Looking For
Pressure Switches?
See page 163.
Need To Count Gallons?
See page 152.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
175
Bicarb Mix Systems
mar c o r p u rifi c ati on
Mar Cor Purification offers a bicarb system designed for quality and ease of use. Our bicarbonate mixing and distribution systems include FDA
certifications. They are cost effective, clean and efficient, and are the best designs in the industry. Other systems are available. Call for details.
Single Mix System
A real space-saver, this single tank bicarb mixing system is designed for easy, complete bicarb mixing and jug filling.
Features and Benefits
•Simple installation - shipped ready-to-use.
•Compact design saves space.
•Jugs are quickly filled from the front-mounted 3/4” faucet.
•Thorough bicarbonate mixing is attained with a powerful 3/4 or 1/2 HP pump system.
•Mix timer (10 min) to avoid over mixing.
Model MCB 202
Height
Width
Depth
Weight: Empty
Full
Electrical
Feedwater Connections SPECIFICATIONS
50 Gallon
3’7”
3’6”
3’0”
90 lbs. 600 lbs. 110 volt, 20 amp circuit
3/4” schedule 80 PVC FPT
100 Gallon
5’1”
3’6”
3’0”
125 lbs.
1,020 lbs.
110 volt, 20 amp circuit
3/4” schedule 80 PVC FPT
S ingle M ix S ystem
PartProduct
NumberDescription
200-02-248
200-02-249
MCB202-50 Bicarb single mix system, 50 gallon
MCB202-100 Bicarb single mix system, 100 gallon
MCB 202 - 100
Central Mixing Delivery System
The redesigned semi-automatic bicarb mixing and distribution system is easier to
use, more efficient and has added features.
Features and Benefits
S t o ra g e T an k s & a c c ess o ries
•System controller is ergonomically designed.
•Low profile 50- or 100- gallon tanks allow for easier powder loading.
•3/4 or 1/2 HP pump for mixing and transferring and 1/8 HP for distribution.
•Improved filling accuracy.
•Audible alarm with remote capability.
•Operator interface / batch controller.
•Pure water flush feature of mix tank and distribution loop reduces overall
sanitizing time.
•Mix timer (10 min) to avoid over mixing.
Model MCB 205/212
Height
Width
Depth
Weight: Empty
Full
Electrical
Feedwater Connections SPECIFICATIONS
50 Gallon
4’9”
7’1”
2’8”
300 lbs. 1,300 lbs. 110 volt, 20 amp circuit
3/4” schedule 80 PVC FPT
100 Gallon
5’1”
7’1”
2’8”
350 lbs.
2,050 lbs.
110 volt, 20 amp circuit
3/4” schedule 80 PVC FPT
M ix and D elivery S ystem
PartPRODUCT
NumberDescription
176
200-02-212
200-02-213
200-02-207
200-02-208
MCB212-50 Bicarb semi-auto mix system, 50 gallon
MCB212-100 Bicarb semi-auto mix system, 100 gallon
MCB 205-50 Bicarb manual fill mix system, 50 gallon
MCB 205-100 Bicarb manual fill mix system, 100 gallon
800-633-3080 / www.mcpur.com / Mar Cor Purification
MCB 212 - 100
Bicarb Mix Systems Parts & Accesories
B icarb S ystem
M C B 2 0 5 / 2 1 2 P arts & A ccessories
PartProduct
NumberDescription
Filters
275-20-016
274-02-005
Pumps
028-05-002
1 micron 9 7/8 filter, Purtrex (Sold as case: qty 40)
(used on older models)
1/2” Nylon Strainer
TE 5 Distribution pump/motor (MCB205/212 models)
028-06-002
TE 6 Mix pump/motor (MCB205/212-50)
028-07-001
TE 7 Mix pump/motor (MCB205/212-100)
028-83-172
Wet end kit, Distrubution pump (MCB205/212 models)
028-83-174
Wet end kit, Mix pump (MCB205/212-50)
028-83-176
Wet end kit, Mix pump (MCB205/212-100)
Valves
425-01-162
3/4” True union ball valve, PVC
425-01-163
1” True union ball valve, PVC
1237914
1/2” Compact ball valve, PVC
425-18-102
3/4” Diaphragm Valve, PVC
MCB 212 - 100
B icarb S ingle M ix S ystem
M C B 2 0 0 / 2 0 2 P arts
PartProduct
NumberDescription
425-06-103
Labcock test port valve, PVC
028-06-002
TE 6 Mix pump (MCB200/202-50)
425-05-162
3/4” 3-way true union valve, PVC
028-07-001
TE 7 Mix pump (MCB200/202-100)
425-05-966
Valve extension (retro)
425-04-103
3/4” Compact Ball Valve, PVC
425-05-967
Valve extension (new style)
425-04-104
1” Compact Ball Valve, PVC
425-27-239
3 GPM flow control nipple, PVC
425-01-162
3/4” T/U Ball Valve, PVC
ME41164
3/4” Inlet Solenoid Valve, 24V VAC
Electrical
313-07-002
Flow paddlewheel
250-13-539
250-13-534
Distribution pump fuse (LPCC-7 1/2)
2 GPM flow sensor (mix)
313-08-162
0.1 GPM flow sensor (distribution)
3/4” MNPT x 3/4” MGHT Dixon
3/4” MNPT x 1/2” HB 90 Dixon
Note: The MCB 200 System has been replaced by the 202 model.
Mix pump fuse (LPCC-15)
313-05-002
350-11-004
350-15-012
300-04-101
0-30 SS pressure gauge
347-41-105
QDC In-Line Hose Barb Body, 1/2”, w/shutoff
347-43-005
QDC Male Pipe Thread Insert, 1/2”, w/shutoff
355-02-008
1/2” Hose, clear braided (per ft.)
Note: See Tech Note 214 for more information about the MCB line of
bicarbonate mix and delivery systems
Looking For Test Strips?
See page 143.
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
S t o ra g e T an k s & a c c ess o ries
314-01-003
Tank mount level switch
Miscellaneous
1228208
3/4” Hose, High Purity, grey (per ft.)
177
Solution Delivery Systems
mar c o r p u rifi c ati on
Mar Cor Purification offers Solution Delivery System (SDS) to mix bicarbonate and deliver
both acid concentrate and bicarbonate to various points-of-use within a hemodialysis
clinic. These systems have FDA certification, list numerous features and benefits, and
include a variety of configurations all suited to meet your specific requirements. Gravity
fed systems remote (installed in the ceiling) or Pressurized Systems (PSDS) are available. Contact us today to configure a system that is right for you.
Features and Benefits
•Direct Delivery – of all concentrates to various point-of-uses. It is conveniently drawn from the drums and/or mixing tank.
•Easy Installation – into new or existing facilities.
•Quiet, Stainless Steel Mixing Pump – agitates the solution. The internal
static mixer has no rotating parts to jam or break.
•Automatic Level Control – switch with audible and visual alarm alerts the
user of low distribution concerns. Adjustable level controller can be set to
mix a variety of concentrates.
•Ultraviolet Irradiator - 245 NM UV lamp in bicarb fluid path to discourage
bacterial growth.
•Sampling Valve – allows for ease of routine quality assurance testing.
•Cone Bottom Tanks – are made of high purity polyethylene. The system is
made of durable, corrosion resistant materials that will withstand harsh solutions.
•Color Coded Connectors – and hoses make differentiation of solutions easy.
•Disinfection and Rinse capabilities – that is compatible with all industry disinfectants. Disinfectant spray bars insure thorough rinsing and disinfecting
of mix and head tanks.
S olution D elivery S ystem
Stor
ra
age Ta
an
nks & acce
ess
ss o r
ries
ies
178
S olution D elivery S ystem c o n t i n u e d
Part Product
NumberDescription
Part Product
NumberDescription
Remote SDS Systems
3024747
SDS, bicarb-only, remote, 100G mix tank
3024748
SDS, 1 acid/bicarb, remote, 100G mix tank
3024749
SDS, 2 acid/bicarb, remote, 100G mix tank
3024750
SDS, 3 acid/bicardb, remote, 100G mix tank
3024773
SDS, bicarb-only, remote, 70G mix tank
3024774
SDS, 1 acid/bicarb, remote, 70G mix tank
3024775
SDS, 2 acid/bicarb, remote, 70G mix tank
3024776
SDS, 3 acid/bicardb, remote, 70G mix tank
Bicarb Mix Tanks
3024746
Bicarb mix tank, 70-Gallon
3024745
Bicarb mix tank, 100-Gallon
Head Tanks & Mounting Kits
ME12689
Head tank assembly, bicarb, 10-Gallon
ME13366
Head tank assembly, bicarb, 15-Gallon
ME14621
Head tank assembly, bicarb, 30-Gallon
ME13360
Head tank assembly, acid, 10-Gallon
ME13379
Head tank ceiling mount kit, 10/15/30-Gallon
ME14629
Head tank wall mount rack*, 10/15/30-Gallon
*Holds two head tanks
Acid Only System
ME14449 SDS, 2 acid-only (controller & 2 transfer pumps)
Pressurized Systems (PSDS)
3024751 PSDS, Bicarb only
3024752 PSDS, 1 Acid
3024753 PSDS, 2 Acid
3024754 PSDS, 3 Acid
Accessories
ME14502 SDS remote status monitor
ME14651 Ozone sanitizing system
ME42020 Ozone test kit
1231492 SDS ambient ozone monitor
1243132 PSDS, Monitor, Bicarb only, Flush Mount
1243131 PSDS, Monitor, Bicarb only, Surface Mount
1243135 PSDS, Monitor, w/Acid, Flush Mount
1243134 PSDS, Monitor, w/Acid, Surface Mount
ME42018 Coily tube, PVC, clear
ME12670 Diptube (55-gallon-drum)-w/wire harness
ME42016 Ball valve, 3/8” SF, blue
ME42017 Ball valve, 3/8” SF, red
800-633-3080 / www.mcpur.com / Mar Cor Purification
Solution Delivery Systems
mar c o r p u rifi c ati on
SDS SPARE PARTS
Part Product
NumberDescription
Electrical
Pump Replacement Components
ME42137 Pump, 3/4 HP, Mix Pump, EBARA
1229406 O-ring, Pump Case, EBARA
1229405 O-ring, Venturi Tube, EBARA
1229404 O-ring, Vent Plug, EBARA
1229407 Pump, 3/4 HP, Mechanical Seal (EBARA)
ME14876 Pump, 1.4 GPM, Replacement Pump/Motor Assembly
ME41575 Pump, 1.4 GPM, Pump Head Only
ME41576 Pump, 1.4 GPM, Diaphragm and Seals (Rebuild Kit)
Replacement Tube and Hose
1228208 Hose, 3/4”, 150 PSI gray
ME60049 Tube, PE, 3/8” Blue
ME60050 Tube, PE, 3/8” Yellow
ME60133 Tube, PE, 3/8” Red
ME60135 Tube, PE, 3/8” Orange
ME60450 Tube, PE, 1/2” Red
ME60451 Tube, PE, 1/2” Blue
ME60452 Tube, PE, 1/2” Yellow
ME60453 Tube, PE, 1/2” Orange
Replacement Valves
ME42015 Valve, ball, 3/8” SF x 3/8” SF Gray
ME40352 Valve, ball, Union, 3/4”
ME40173 Valve, ball, Union, 1”
ME40432 Valve, ball, Union, 1 1/2”
ME42053 Check Valve, 1/4” FNPT, White
ME41985 Check Valve, 3/4” FNPT, 2#
ME41184 Flowmeter, W/needle, 5 GPM
Switches
1267743 Indicator, 24V, Amber, GE
1234585 Indicator, 24V, Green, GE
1234584 Indicator, 24V, Red, GE
1237010 Lamp, Green, 24V, GE
1237011 Lamp, Red, 24V, GE
1234582 Switch, 2 POS, Maintain, 2NO, 2NC, GE (on/off switch)
1234583 Switch, 2 POS, Maintain, 1NO, 1NC, GE
1234579 Switch, 3 POS, Maintain, 2NO, 2NC, GE (mix/off/transfer)
1234581 Switch, 3 POS, MOM, 1NO, 1NO, GE (auto fill/manual)
1234580 Switch, P-Button, MOM, 1NO, GE (push button)
Tank Replacement Parts (Mix Tank and Head Tanks)
ME40821 Sprayhead, PVC, 3/8” (Mix Tank)
ME41054 Sprayhead, PVC, 1/4” (Head Tank)
ME41047 Tank Suction, Screen
ME41046 Tank Suction, Ring Screen
ME40291 Valve, ball, 1/4” x Barb (Mix Tank Sample Valve)
1230008 Tank Lid, Mix Tank
1236603 O-ring, 16” Diameter
1236571 Gasket, 2.25” Diameter, Solid
ME41048Eductor, Mixing, for 100 Gallon Tank
ME41260 Eductor, Mixing, for 70 Gallon Tank
ME14886 O-ring, Lid Seal, 3/8” x 16”, PVC
ME41237 Flow Control, Mix Pump, 10 Gal
ME50112 Tape, Foam, Tank Lid (price per foot)
ME60690 Silicone Sealant, 3 oz
UV Replacement Components
ME41584 UV, 2GPM, SS (Complete Unit)
ME41585 UV, LAMP, 2 Pin
ME41886 UV, Quartz sleeve, Double Open End
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
S t o r a g e T a n k s & a c c e ss o r i e s
ME30274 Circuit Breaker, 20 amp
ME21165 Fuse, 1.5 amp, SLO BLO
ME21077 Fuse, 1 amp, SLO BLO
ME20283 Indicator, 24V, Red, IDEC
ME20284 Indicator, 24V Green, IDEC
ME21054 LAMP, Green, 24V
ME21053 LAMP, Red, 24V
ME14927 PLC, VersaMax, Main Module
ME21191 PLC, VersaMax, Expansion Module
ME21051 Relay, 24VAC, 30 amp (C-1)
ME20115 Relay, 24VAC, 20 amp (MCR-1)
ME20089 Relay, 24VAC, 5 amp P (CR1 through CR6)
ME20280 Sonalert, 24 Vac
ME30118 Switch, Float, Mix Tank, 1-1/4 NPT
ME20161 Switch, Float, Head Tank, 1/2 NPT
ME41062 Switch, Float, Dip Tube
ME41063 Switch, Flow, 1”, 2 GPM
ME20286 Switch, IDEC, SPST, Power
ME20287 Switch, IDEC, P-Button, Momentary
ME20288 Switch, IDEC, 3 Position (Mix/OFF/Transfer)
ME21048 Switch, IDEC, 3 Position (Auto Fill/Manual)
ME21044 Timer, Digital
ME41164 Valve, Solenoid, Plastic, (Water Inlet)
ME13077 Wire, Dip Tube, 45’
ME13076 Wire, Head Tank, Remote
ME14639 Dip Tube W/O Wire, 37”
Filter/Housing Replacement Parts
ME40822 Filter Housing, 10”
ME40920 Filter, 0.20 mic, 10” Water
ME41383 Filter, 5 mic, 2 x 6-3/8” Vent
ME41762 Filter, GAC, 2 x 10-1/4” Vent (For Ozone Use)
Fittings – General
ME40455 QD, Female, 1/4” MNPT (Tank / Operate)
ME40104 QD, Female, 3/4” barb, Cam-loc
ME40864 QD, Female, 1” barb, Cam-loc
ME42092 QD, Male, 3/8” tube (Bicarb Wand)
ME40103 QD, Male, 3/4” MNPT, Cam-loc
ME40863 QD, Male, 1” MNPT, Cam-loc
Fittings – Speed Fit
ME41205 Adap. 1/2” tube end x 1/2” MNPT
ME41259 Adap. 1/2” tube end x 3/8” MNPT
ME40567 Adap. 3/8” tube end x 1/4” MNPT
ME40672 Barb Adapter, 3/8” tube end x 3/8” hose
ME40569 Elbow, 3/8” SF x 1/4” MNPT
ME41092 Elbow, 1/2” SF x 1/2” MNPT
ME40568 Elbow, 3/8” SF x 3/8” MNPT
ME41086 Elbow, 1/2” SF x 1/2” tube end adap.
ME40564 Elbow, 3/8” SF x 3/8” tube end adap.
ME40571 Lockclip, red, 3/8”
ME40572 Lockclip, red, 1/4”
ME41089 Straight, 1/2” SF x 1/2” MNPT
ME40671 Straight, 3/8” SF x 1/4” MNPT
ME41087 Straight, 1/2” SF x 3/8” MNPT
ME41232 Straight, 3/8” SF x 1/2” MNPT
ME41094 Tee 1/2” x 1/2” x 1/2” SF
ME40673 Tee 3/8” x 3/8” x 3/8” SF
ME41141 Tee 1/2” x 1/2” x 3/8” SF
ME41233 Union, 1/2” SF
ME41160 Union, 1/2” SF x 3/8” SF
ME41258 Union, elbow, 1/2” SF
ME41265 Union, bulkhead, 1/2” SF
ME40561 Union, bulkhead, 3/8” SF
SDS SPARE PARTS continued
Part Product
NumberDescription
179
Training Services
Seminars & Worksh op s
Mar Cor Purification offers you to attend their comprehensive water treatment system training program for hemodialysis. Our seminars will be held at our Plymouth,
MN and our Golden, CO facilities. 2-5 day seminars include lunch and refreshments. Seating is limited so contact us to sign-up.
Four Day Seminar and Workshop
•Clinical Symptoms of Inadequately Treated Water
•Water System Components
•AAMI Standards & FDA Guidance for Water Treatment Monitoring
•Bacterial Treatment Concerns
•RO Theory & Fundamentals: Cleaning & Disinfecting Issues
•Hands-on Training in Servicing a Water Treatment System
Central RO Systems
•CWP 100
•23G
•4400M
Portable RO Systems
•Millenium HX
•WRO 300 H
•WRO 300
On-line Water Training
The need for hemodialysis water training, inspection, and information has placed
greater demands on you and your staff, while at the same time, regulatory organizations continue to refine standards of water product performance. Limited time,
skills, and resources can get in the way of a high-quality, water treatment program.
Our Solution
S t o ra g e T an k s & a c c ess o ries
Mar Cor is a name you have come to trust in hemodialysis. The perfect combination
for your dialysis clinic now offers the Water Solution Package – the tool you need
for total water convenience at your clinic.
The Water Solution Package consists of training for your staff on hemodialysis
water topics and offers hemodialysis support information you can use. We enroll
you and your staff into the Dialysis Water University Program for complete on-line
water training while providing you access to reference materials and other water
information based sites.
Hemodialysis Water Training
•Training Levels 1, 2 and 3
•Course structure by topic and skill level
•Appropriate for all staff members
•Approved contact hours through NANT*
•Self-administering and interactive
•Offered on a 24-7 basis
Hemodialysis System Access
•Current water regulations and guidelines
•Hemodialysis-oriented information
•Ongoing “News You Can Use”
•Consolidated web links library
W ater S olutions O N - L I N E T R A I N I N G
PartPRODUCT
NumberDescription
800-10-161
800-10-162
800-10-165
800-10-166
1 person, without Contact Hours
1 person, with Contact Hours
5 people, without Contact Hours
5 people, with Contact Hours
Because of our experience in hemodialysis, we understand your needs better than anyone else in the industry. Mar Cor Purification makes the Perfect Combination for your dialysis clinic. Visit www.dialysiswatersolution.com to learn more about this exciting program.
* Mar Cor Purification will provide contact hours through the National Association of Nephrology Technicians/Technologists (NANT) for this program.
These contact hours are provided through the California Board of Nursing and may be used for certification requirements by the Nephrology Nursing
Certification Commission (NNCC) and recertification requirements by the Board of Nephrology Examiners, Nursing and Technology (BONENT), NNCC
and the National Nephrology Certification Organization (NNCO) for both dialysis technicians and nurses.
180
800-633-3080 / www.mcpur.com / Mar Cor Purification
Product Index
Pr o d u c t in d e x
Mar Cor Puri f i cati on / www.mcpur.com /
800-633-3080
181
Product Index
Filters and Membranes
Capsule Filters............................................. 16-18
Carbon Filters.............................................. 15,16
Cartridges.............................................. 13,16,34
Depth Filters...................................................7-13
Filter Housings............................................ 37-42
Filter Housing Accessories...............................39
Hollow Fiber Filters..................................... 30-33
Lab Water Products.................................... 35-36
Membranes................................................. 43-44
Pleated Filters....................................... 14,19-29
Wound Filters....................................................13
Process Pipe and Fittings
Cam Lever Couplings........................................68
Cement..............................................................69
Cutters...............................................................70
Hose............................................................. 54-55
Hose Clamps.....................................................57
Hose Fittings................................................ 56-57
Lubricant............................................................70
Pipe...................................................46-47,52,51
Pipe Fittings........................................... 48-49,53
Pipe Support................................................ 71-72
Primer................................................................69
Quick Disconnect Fittings........................... 64-67
Thread Tape......................................................70
Tools...................................................................70
Tube Fittings................................................ 60-63
Tubing...............................................50-51,58-59
Valves
3-Way.................................................................75
Ball........................................................ 74-76, 82
Check........................................................... 77-78
Compact.............................................................75
Pr o d u c t in d e x
Diaphragm.........................................................79
Float...................................................................84
Flow Control.......................................................79
Lab Faucets.......................................................83
Labcock.............................................................76
Needle................................................................76
Pressure Relief..................................................80
Solenoid....................................................... 80-81
Temperature Mixing..........................................84
Pumps
Booster..............................................................94
Centrifugal................................................... 86-87
Delivery and Transfer........................................94
Drum..................................................................93
Magnetic Drive............................................ 88-92
Key to
Symbols:
182
Customer responsible for inbound freight charges.
Conditioning Equipment
Carbon...............................................................98
Filtering Parts & Accessories............................99
Filtering Material.............................................100
Multimedia........................................................96
Service Carbon....................................... 104-106
Service Deionization.............................. 104-106
Water Softening................................................97
Ultraviolet............................................... 101-103
Reverse Osmosis Equipment
Carts.................................................................133
Central RO Systems.............................. 108 -119
Portable RO Systems............................ 120 -132
Lab RO Systems..............................................134
Cleaners and Disinfectants
Cleaners.................................................. 139-140
Cleaning Systems................................... 145-146
Dry Fog System...............................................137
Endotoxin Detection........................................144
Surface & System Disinfectants........... 136-138
Test Kits & Supplies............................... 141-144
Process Controls
Conductivity Instrumentation................ 153-155
Electrical Supplies.................................. 166-168
Flow Meters............................................ 150-151
Flow Sensors...................................................165
Flow Velocity Meters.......................................163
Injectors...........................................................161
Level Switches.................................................164
Portable Process Meters....................... 156-158
Pressure Gauges.................................... 148-149
Pressure Regulators.......................................162
Pressure Switches...........................................163
Resistivity Instrumentation.................... 149-151
Temperature Gauges......................................149
Totalizing Meters.............................................152
Water Quality Control......................................159
Water Quality Indicators.................................160
Vacuum Breakers............................................161
Storage Tanks and Accessories
Bicarb Mix Systems................................ 176-179
Bulk Storage........................................... 170,172
Bulkhead Fittings............................................173
Conical Bottom................................................171
Horizontal Leg.................................................171
Pressure...........................................................175
Rectangular.....................................................173
Spray Nozzles..................................................174
Wall Boxes.......................................................174
Training Services.............................................180
Customer responsible for hazardous
in-bound freight charges.
800-633-3080 / www.mcpur.com / Mar Cor Purification
The following trademarks
in this catalog are used by the
firms shown on the left:
Aquafine Corporation: Aquafine®, Colorguard™
Asahi/America: Duo-Bloc®, Omni®, Multiport®, Labcock®
Associates of Cape Cod: Pyrosate™
Automatic Switch Co.: ASCO®, Red Hat II®
Avista Technologies: ROClean™, Liqui-Clean™
BadgerMeter: Recordall®
Banjo Corporation: Banjo®
Blue & White Industries: Blue-White®
Dupont®: VITON® and DELRIN® are registered trademarks
of E.I. du Pont de Nemours and Company or its
affiliates.
Ecolab: Filtrapure™
Egli, Fischer: clic®, Strutcatcher®
Elf Autochem: Kynar®
Enfield: ENPURE™
Esmer Industries: Grilamid®
FilmTec Corp.: FILMTEC®
Fleck Industries: Fleck®
G.A. Murdock: Mur-Lok®
Gambro Lundia AB: Posiclear™
General Electric: Noryl®
GE Water Technologies: Aquatrex®, Hytrex®, Purtex™,
OSMO®, TONKAFLO®, DESAL™,
Grundfos Corporation: Grundfos®
Hach Corporation: FerroVer®, CalVer®, AccuVac®
Harmsco®: Hurricane®
Hubbell: Insulgrip®, Twist-Lock®, VARI-SIZE®
ITT Jabsco: Jabsco®
IPS Corporation: Weld-On®
Lutz Pumpen GmbH: Lutz®
Mar Cor Purification: Semper Pure™, PTG-520®,
MicroFree™
Mazzei Injector Corp.: Mazzei®
Meissner: STyLUX®
MetPro Corporation: Keystone, Blue Giant™
Minntech: Minnclean®, Fibercor®, Minncare®, Minncare
Dry Fog™, FiberFlo®, Minnclean®
Myron L Company: Ultrameter II™, uDock™, Techpro II™
Norton: Tygon®
Pall Corp.: SuporLife™
Parker Hannifin: Parflex®, Fast & Tite®, Super O Lube®,
Trueseal®
Phillips: Ryton®
Pentair: Posi-Clear®
Plast-O-Matic Corporation: Plast-O-Matic®
Plymouth Products: Big Blue®, Slim Line™
Power Process Controls: Hydroguard®
Research Corporation: Serim™,
Hi Sense Ultra 1.0™
Severn Trent: Ultra Dynamics®
Structural Fibers: WellMate™, ROMate™
Terracon Corp.: Terrapure®
Versa Products: Versa®
W.L. Gore & Assoc.: Gore®
VWS (UK) Ltd: ELGA®, PURELAB®, MEDICA®, CENTRA®
Order Form
Mar Cor Purification Product Catalog
Your source for Filtration, Water and Disinfection products
We can process your order Monday through Friday from 8:00am to 8:00pm EST.
For the United States, call 800-633-3080 or Fax 484-991-0230
or email completed form to orders@mcpur.com
Billing Information
Shipping Information
Acct. No.__________________________________________________
o
P.O. No.__________________________________________________
Same as Billing
Attn______________________________________________________
Attn______________________________________________________
Company Name____________________________________________
Company Name____________________________________________
Address__________________________________________________
Address__________________________________________________
__________________________________________________
__________________________________________________
City___________________________ St_______Zip______________
City___________________________ St_______Zip______________
Phone________________________ Fax_________________________
Phone________________________ Fax_________________________
Email____________________________________________________
PARTPricePrice
NUMBERQtyDescription
Each
ext. ($)
Sub total
Tax*
Total For This Page
Page_________ of __________
*All items sent to the “ship to” address will be considered taxable unless we
possess a signed tax exemption certificate at time of order placement.
Shipping and handling charges will be added to the invoice.
Mar Cor Purificaiton Terms and conditions as found on www,mcpur.com apply
Total For This Order
Shipping Method
Payment Details
o
We have an account, please bill us:
Acct. No_________________________________________________ PO No____________________________
o
o
Check Enclosed.
Credit Card:
o
o
o
o
o
o
o
Next Day Air
2nd Day Air
Ground
Other:
Acct. No._______________________________________________ Exp. Date_________________________
Name on Card___________________________________________
For Mar Cor Use Only
Salesperson_________________________________________________ Sales Order No._____________________________________________
Order Date__________________________________________________ Shipped Via________________________________________________
Customer No.________________________________________________ Date Shipped_______________________________________________
183
184
Mar Cor Purification Introduction
Mar Cor Purification, owned by Cantel Medical Corp., is a business that consists of several familiar companies integrated to offer filtration, water and disinfection technologies,
namely: Minntech Filtration Technologies Group, Mar Cor Services, Biolab Equipment,
Fluid Solutions, GE Medical Water & Gambro Water.
This combination allows us to better serve our medical & life science customers by supplying high-quality water treatment equipment with
our Mar Cor, GE Medical & Biolab line of products, while providing proven filtration and disinfection technologies through our FiberFlo®
Filters and Minncare® Cold Sterilant brands.
Medical Water Products
Mar Cor Purification is the largest supplier of hemodialysis water systems in the U.S. Mar Cor offers hemodialysis providers a turn-key
solution that is designed to make sure critical water needs are being served in compliance with applicable regulations.
Leading the Way in Heat Disinfection
Mar Cor combines pretreatment, filtration, reverse osmosis (RO), and ultrafiltration to provide the most cost effective system package. All
of Mar Cor’s systems carry a 510(k) medical device certificate from the FDA and are designed to exceed AAMI and CSA standards. Each
system is serviced from one of Mar Cor’s 22 nationwide service locations. No matter what the source water is, Mar Cor can provide a safe,
reliable system that is designed to produce water to ensure safe, high quality care for hemodialysis patients.
Mar Cor Purification
Main Offices
Life Science Water Products
Mar Cor Purification is a leading provider of complete water treatment systems and services
for the Life Science market. For over 35 years and over 1,000 installations, Mar Cor has been
providing high-purity water solutions to companies in the pharmaceutical, cosmetics, medical device, food & beverage and dialysis markets.
Mar Cor has accomplished this with their Life Science line of products, while providing proven
filtration and disinfection technologies through our FiberFlo® Filters and Minncare® Cold Sterilant brands. Mar Cor Purification has one of the largest water treatment related technical
and field support networks to support their installed systems with 22 locations across the
U.S. and Canada.
BioScience Products
Minneapolis, MN
The BioScience Products Group has been providing hollow fiber membrane filters, cold sterilant disinfectants and dry fog products for over 20 years. These products are used in many
pharmaceutical, medical and industrial applications as a key component of maintaining a
high quality filtration & disinfection environment.
Filtration Technologies include unique hollow fiber membrane technology available in FiberFlo®
brand filtration and separation devices. Disinfection Technologies include Minncare® Cold Sterilant, the most popular disinfectant used to reduce or prevent biofilm contamination of a water
treatment and distribution system.
Philadelphia, PA
Toronto, ON
Mar Cor Purification Service Center Locations
Atlanta, GA
Denver, CO
New York, NY
San Francisco, CA
Birmingham, AL
Detroit, MI
Orlando, FL
Seattle, WA
Boston, MA
Los Angeles, CA
Philadelphia, PA
Toronto, ON
Chicago, IL
Minneapolis, MN
Pittsburgh, PA
Washington, DC
Cleveland, OH
Montreal, QC
Raleigh, NC
Dallas, TX
Nashville, TN
San Antonio, TX
Mar Cor Online Resources
www.mcpur.com
Your source for all things Mar Cor Purification.
Find product information and get the latest news regarding Mar Cor
Purification products and services.
Water, Filtration, and Disinfection Technologies
Competent, Consistent &
Compliant
Mar Cor Purification is dedicated
to providing innovative solutions
through filtration, water, and disinfection technologies.
As a wholly owned subsidiary of Cantel
Medical Corp. (NYSE:CMN), Mar Cor
Purification is uniquely positioned to
offer the medical, life science and
industrial marketplace hollow fiber
membrane filtration, complete water
purification equipment and services,
and proven sterilant products. We deliver value to our customers by improving product quality, reducing operating
costs, protecting capital investments,
and safeguarding people’s lives. For
more information on Mar Cor Purification, visit www.mcpur.com.
Medical Product Catalog Categories
Filters &
Membranes
Reverse Osmosis
Equipment
Process Pipe
& Fittings
Cleaners &
Disinfectants
Valves
Process Controls
Pumps
Storage Tanks &
Accessories
Conditioning
Equipment
Mar Cor Purification • Medical Product Catalog • 5th Edition
Mar Cor Purification
Medical Product Catalog
5th Edition
Contact Us:
We have 22 offices/service centers in many key
cities throughout North America.
To find your local Mar Cor Purification representative, go to www.mcpur.com/contact and choose
your region for locations and contact information.
www.mcpur.com
Mar Cor Purification
Corporate Headquarters
14550 28th Avenue North
Plymouth, MN 55447
Toll Free:
(800) 633-3080
Fax:
(763) 210-3868
Web: www.mcpur.com
Email:info@mcpur.com
© 2012 Mar Cor Purification. All rights reserved. P/N: 3024682 Rev.C
Competent, Consistent & Compliant