< Small Signal InGaP HBT >
MGF3022AM
4pin flat lead package
DESCRIPTION
The MGF3022AM InGaP-HBT(Heterojunction Bipolar Transistor) is
designed for use in L to C band amplifiers.
The 4pin flat lead package is small-thin size, and offers high cost
performance.
Outline Drawing
FEATURES
GLP=18dB,P1dB=16.5dBm,OIP3=32dBm
@ f=2.4GHz,VCE=3V,Ic=33mA
APPLICATION
L to C band low noise amplifiers
MITSUBISHI Proprietary
Not to be reproduced or disclosed without
permission by Mitsubishi Electric
QUALITY GRADE
GG
RECOMMENDED BIAS CONDITIONS
VCE=3V, IC=33mA
ABSOLUTE MAXIMUM RATINGS
Symbol
VCBO
VCEO
VEBO
IC
IB
PT
Tch
Tstg
Parameter
Ratings
Unit
Collector to Base voltage
12.0V
V
Collector to Emitter voltage
4.0V
V
Emitter to Base voltage
2.0V
V
Collector current
45
mA
Base current
10
mA
Total power dissipation
160
mW
Channel temperature
150
C
Storage temperature
-40 to +125
C
ELECTRICAL CHARACTERISTICS
Symbol
(Ta=25C )
Parameter
(Ta=25C )
Test conditions
Limits
Unit
MIN.
TYP.
MAX
hFE
DC Current Gain
VCE=3V,Ic=33mA
90
110
130
GLP
Linear Power Gain
VCE=3V,Ic=33mA
15.5
18
--
dB
P1dB
Output power at 1dB gain
compression
f=2.4GHz
14
16.5
--
dBm
OIP3
3rd Oder Intermodulation
Distortion Output Intercept Point
--
32
--
dBm
VCE=3V,Ic=7mA
--
15
--
dB
NFmin. Minimum noise figure
f=2.4GHz
Note 1: OIP3,Gs and NFmin. @2.4GHz are not tested.
Note 2: GLP and P1dB @2.4GHz are tested with sampling inspection.
--
1.0
--
dB
Gs
Associated gain
Publication Date : May, 2012
CSTG-14629
1
<Small Signal InGaP HBT>
MGF3022AM
4pin flat lead package
2.10 ±0.1
1.30 ±0.05
(0.65) (0.65)
0.30
+0.1
-0.05
+0.1
0.30 -0.05
①
±0.1
±0.1
1.25
Top
2.05
②
H □
②
③
0.40
+0.05
+0.1
0.30 -0.05
+0.1
-0.05
0.11 -0
(0.60) (0.65)
0.49 ±0.05
1.25 ±0.05
Side
③
②
(0.85)
Bottom
②
Unit: mm
① Base
② Emitter
③ Collector
①
(GD-30)
Publication Date : May, 2012
2
<Small Signal InGaP HBT>
MGF3022AM
4pin flat lead package
(Reference data)
TYPICAL CHARACTERISTICS
IC - VBE
IB=20uA　STEP
45
40
35
30
25
20
15
10
5
0
1E-01
1E-03
1E-04
1E-05
1E-06
1E-07
1E-08
1E-09
1
2
VCE (V)
3
0.5
4
2
MAG/MSG (dB)
MAG
20
S21
15
2
|S21| ,MAG,MSG(dB)
MSG
25
VCE=3V
IC=33m A
10
5
1.00
f(GHz) Log-Scale
20
2.0
15
1.5
10
1.0
NF
Ta=25℃
VCE=3V
f=2.4GHz
0.5
Gs(dB)
Gs
5
0
0
5
21
1.8
20
1.6
19
1.4
18
1.2
17
1.0
16
0.8
15
0.6
14
0.4
13
0.2
0
10.00
NF,Gs vs Ic
2.5
1.5
IC - MAG/MSG & K-factor
|S21| ,MAG,MSG
30
1
VBE (V)
10 15 20 25 30 35
Ic(mA)
Publication Date : May, 2012
3
5 10 15 20 25 30 35 40
IC (mA)
K-factor
0
NF(dB)
VCE=3V
1E-02
IC (A) Log-Scale
IC (mA)
IC - VCE
(Ta=25°C)
<Small Signal InGaP HBT>
MGF3022AM
4pin flat lead package
f
(GHz)
S11
Mag.
Angle
S21
Mag.
Angle
S12
Mag.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
0.403
0.405
0.428
0.459
0.499
0.539
0.588
0.639
0.689
0.733
0.774
0.800
0.802
0.817
0.815
0.794
0.783
0.770
-155.3
169.7
147.6
129.9
114.8
100.1
88.2
77.3
67.6
58.5
49.9
41.5
33.8
26.6
18.9
11.1
5.3
0.3
16.514
8.577
5.780
4.353
3.485
2.902
2.464
2.126
1.874
1.673
1.499
1.350
1.228
1.137
1.040
0.954
0.875
0.806
93.9
72.0
55.5
40.5
26.1
11.9
-1.7
-14.5
-27.0
-39.5
-51.8
-63.7
-74.6
-86.6
-98.0
-109.3
-120.1
-128.6
0.032
0.054
0.076
0.098
0.118
0.138
0.154
0.168
0.180
0.190
0.198
0.203
0.209
0.219
0.227
0.230
0.236
0.234
(Conditions:VCE=3V,IC=33mA,Ta=25deg.C)
S22
K
MAG/MSG
Angle
Mag.
Angle
(dB)
55.0
53.6
47.9
40.1
31.3
21.6
11.9
2.3
-7.7
-17.4
-26.9
-36.1
-44.6
-53.9
-64.0
-74.1
-83.7
-93.9
0.329
0.203
0.155
0.121
0.089
0.065
0.083
0.127
0.182
0.238
0.287
0.333
0.383
0.401
0.413
0.441
0.446
0.434
-62.6
-69.9
-78.8
-93.3
-118.2
-154.8
152.6
121.7
103.2
91.7
81.1
73.5
64.6
55.6
49.6
42.9
32.4
26.6
0.84
1.02
1.07
1.09
1.09
1.08
1.08
1.06
1.03
1.00
0.96
0.94
0.96
0.92
0.92
0.98
1.02
1.09
Measurment plane
Recommended foot pattern;FR4(εr=4.6@1MHz,t=0.8mm)
Publication Date : May, 2012
4
27.1
21.1
17.2
14.7
12.9
11.5
10.4
9.5
9.0
9.2
8.8
8.2
7.7
7.1
6.6
6.2
4.8
3.6
<Small Signal InGaP HBT>
MGF3022AM
4pin flat lead package
Pout,Glp vs Pin
25
P1dB=16.5dBm
20
Pout,IM3(dBm) S.C.L
Pout(dBm),Glp(dB)
Pout,IM3 vs Pin
50
Gain
15
10
5
Pout
0
VCE=3V
IC=33m A
f=2.4GHz
-5
-10
35
20
OIP3=32dBm
Pout
5
-10
-25
-40
-55
IM3
VCE=3V
IC=33m A
f=2.4GHz,1MHz Offset
-70
-25
-20
-15 -10 -5
Pin(dBm)
0
-20 -15 -10 -5 0
5
Pin(dBm) S.C.L
5
Publication Date : May, 2012
5
10
15
<Small Signal InGaP HBT>
MGF3022AM
4pin flat lead package
Keep safety first in your circuit designs!
 Mitsubishi Electric Corporation puts the maximum effort into making semiconductor products better and
more reliable, but there is always the possibility that trouble may occur with them. Trouble with
semiconductors may lead to personal injury, fire ore property damage. Remember to give due
consideration to safety when making your circuit designs, with appropriate measures such as (i) placement
of substitutive, auxiliary circuits, (ii) use of non-flammable material or (iii) prevention against any
malfunction or mishap.
Notes regarding these materials
 These materials are intended as a reference to assist our customers in the selection of the Mitsubishi
semiconductor product best suited to the customer’s application; they do not convey any license under any
intellectual property rights, or any other rights, belonging to Mitsubishi Electric Corporation or a third party.
 Mitsubishi Electric Corporation assumes no responsibility for any damage, or infringement of any thirdparty’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit
application examples contained in these materials.
 All information contained in these materials, including product data, diagrams, charts, programs and
algorithms represents information on products at the time of publication of these materials, and are subject
to change by Mitsubishi Electric Corporation without notice due to product improvements or other reasons.
It is therefore recommended that customers contact Mitsubishi Electric Corporation or an authorized
Mitsubishi Semiconductor product distributor for the latest product information before purchasing a product
listed herein.
The information described here may contain technical in accuracies or typographical errors.
Mitsubishi Electric Corporation assumes no responsibility for any damage, liability, or other loss rising from
these inaccuracies or errors.
Please also pay attention to information published by Mitsubishi Electric Corporation by various means,
including the Mitsubishi Semiconductor home page (http://www.mitsubishielectric.com/).
 When using any or all of the information contained in these materials, including product data, diagrams,
charts, programs, and algorithms, please be sure to evaluate all information as a total system before
making a final decision on the applicability of the information and products. Mitsubishi Electric Corporation
assumes no responsibility for any damage, liability or other loss resulting from the information contained
herein.
 Mitsubishi Electric Corporation semiconductors are not designed or manufactured for use in a device or
system that is used under circumstances in which human life is potentially at stake. Please contact
Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor when
considering the use of a product contained herein for any specific purposes, such as apparatus or systems
for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
 The prior written approval of Mitsubishi Electric Corporation is necessary to reprint or reproduce in whole
ore in part these materials.
 If these products or technologies are subject to the Japanese export control restrictions, they must be
exported under a license from the Japanese government and cannot be imported into a country other than
the approved destination.
Any diversion or re-export contrary to the export control laws and regulations of Japan and/or the country
of destination is prohibited.
 Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product
distributor for further details on these materials or the products contained therein.
© 2011 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED.
Publication Date : May, 2012
6