BMW i
Freude am Fahren
Wallbox Pure
2
Wallbox Pure
Owner's manual
Imprint
5
Your Wallbox Pure advantages
6
Safety and warranty information
7
Operating elements and indicators
9
Charging the vehicle
12
Restarting and troubleshooting
15
Care, maintenance and disposal
18
CE Declaration of Conformity
19
3
EN
Contents
4
Imprint
Publisher
Bayerische Motorenwerke Aktiengesellschaft
Munich, Germany
www.bmw.com
Translation of the original owner's manual
Copyright ©2013 BMW AG Munich
This documentation contains information protected by copyright. All rights reserved, especially the
right of reproduction and distribution. No part of this documentation may be reproduced (photocopying, scanning or any other procedures) or processed, copied or distributed in any form using electronic
systems without the written consent of Bayerische Motorenwerke Aktiengesellschaft.
Contraventions are liable to compensation.
EN
This document should be retained for future use.
5
Your Wallbox Pure advantages
360° electric mobility
We are pleased that you have opted for next generation mobility with the BMW Wallbox Pure. Low
emissions and the highest level of eco-friendliness are the pre-eminent characteristics of electric mobility. With your BMW Wallbox Pure, you profit from innovative ergonomics and technological intelligence, as well as an elegant aesthetics and maximum comfort:
■
Easy, ergonomic charging
■
Comfortable, one-handed operation
■
Appealing BMW i design
■
Pleasant look and feel due to the materials selected
■
Charging timer support
■
Charging status check via an NFC-enabled mobile phone
■
Weather-proof design
■
Especially practical: storage compartment and shelf
■
Ecologically sustainable production
Have fun and enjoy your BMW Wallbox Pure.
Your BMW AG
Pictograms
Indicates instructions or warnings that must be followed.
Indicates information calling attention to particular details.
Indicates information calling attention to electrical hazards.
Indicates the end of the instruction or other text.
6
Safety and warranty information
Reading the owner's manual
The BMW Wallbox Pure opens up a new dimension of driving pleasure. This owner's manual helps
to ensure optimal and safe charging of your BMW electric or plug-in hybrid vehicle. Updates after the
time of going to print can be found online at www.bmw.com.
The more familiar you are with the BMW Wallbox Pure, the more confident you will
be when charging your vehicle.
Please read this owner's manual before charging your vehicle.
This document must always be kept in close proximity to the Wallbox Pure.
These instructions make Wallbox Pure operation easier.
Please see your vehicle's owner's manual for more details about the charging process.
Both documents contain important information about charging vehicle batteries, as well as
about operating and traffic safety.
Intended use
The Wallbox Pure is intended to be used for charging batteries of BMW electric and plug-in hybrid vehicles.
Hazard of electric shock, short circuit or overheating!
Direct current fault due to vehicles from other manufacturers!
Before charging vehicles from other manufacturers, trained and qualified personnel must always check the electrical installation to insure that it meets the specifications/requirements of
the vehicle being charged.
Hazard of electric shock, short circuit or overheating!
Never use the Wallbox Pure to operate electrical devices!
Only use cables and plugs that have been approved by BMW.
EN
Hazard of overloading!
Do not use the Wallbox Pure for continuous commercial operation!
Only use the Wallbox Pure for normal charging processes in domestic use.
7
Hazard of electric shock, short circuit or overheating!
The Wallbox Pure must only be installed and serviced by qualified personnel.
Only qualified personnel (such as the BMW Wallbox Installation Service) have the skills and
knowledge related to the design, installation and operation of electrical equipment, and they
have been trained on electrical hazards.
Warranty
Your BMW dealer can inform you about the corresponding warranty conditions. The Wallbox
Pure must be installed and operated for its intended use in accordance with the manner described in
the installation instructions and owner's manual.
8
Operating elements and indicators
Next generation operating concept
The Wallbox Pure captivates with the highest level of ergonomic comfort and easy, one-handed operation. The first step is to familiarise yourself with the operating elements:
1
2
3
Vehicle plug with charging cable
Lower shelf
Stop/Start button with LED indicator
4
5
6
Weather-proof plug holder
Key locking system
Upper storage compartment
Weather-proof plug holder
This practical holder protects the electrical contacts on the vehicle plug from moisture, damage and
dirt. The handle is also positioned at an ergonomic height.
EN
Always use the plug holder when the charging cable is not in use to protect it from damage
and to save yourself from unpleasant bending or dirty hands.
9
Key locking system
A key locking system above the storage compartment protects the Wallbox Pure against unauthorised
use:
The key (1) can be removed in two positions (2):
Unlocked
Normal operation
The LED indicator in the Stop/Start button displays the current charging and
operating status (see following page).
Locked
Stop/Start is deactivated.
Connected vehicle finishes charging.
Then the Wallbox Pure shuts down.
The LED indicator in the Stop/Start button displays the current charging and
operating status (see following page).
Stop/Start button
You can use the Stop/Start button to interrupt/continue the charging process without using the vehicle
key.
LED indicator
The LED indicator in the Stop/Start button displays whether or not your vehicle is charging. The
LED indicator is illuminated or flashes in the following colours depending on the key position, or the
charging and operating status.
10
LED
Colour
Key locking
system
Vehicle
connected
Wallbox Pure
Blue
Unlocked
No
Waiting for vehicle connection
Blue
Unlocked/Locked
Yes
Charging halted by vehicle
Waiting for the charging process
Blue
Unlocked/Locked
Yes
Charging
Green
Unlocked
Yes
Charging halted by user
Pink
Locked
Yes/No
Charging disabled
Red
Unlocked
Yes/No
Error (see page 15)
Shelf and storage compartment
EN
You can place a key ring, wallet or similar on the lower shelf in order to keep your hands free for
charging. The upper storage compartment can be used for small accessories such as light bulbs, or
paint and touch-up sticks.
11
Charging the vehicle
Hazard of electric shock, short circuit or overheating!
Always follow your vehicle's owner's manual when charging!
Please see the vehicle's owner's manual for information regarding connecting the charging cable to the vehicle.
Connecting the vehicle
Unlock the key locking system. Remove the vehicle plug (1) from the holder.
Position the plug (1) at the charge point on the vehicle and insert according to the vehicle's owner's
manual.
The plug connection to the vehicle is weather-proof, protecting against moisture and snow.
The indicator on the vehicle's charge point is not active when the vehicle is in sleep mode.
12
Starting the charging process
Step
Procedure
Note
1
Turn the key to the "unlocked" position.
2
The LED indicator must be illuminated in solid
blue. If not, please refer to the Troubleshooting
section (page 15).
Vehicle is unplugged.
A solid blue light from the LED indicator means that the Wallbox Pure is
waiting to begin charging.
3
Connect the charging cable to the charge point
on the vehicle: The LED indicator is illuminated
in solid blue if charging has not yet started. A vehicle timer can delay the start of charging.
The vehicle performs an initialisation procedure: The indicator on the
vehicle's charge point flashes orange.
The vehicle indicates that it is not
ready for charging in the following situations:
- The battery is already charged.
- The battery temperature is too high.
- The vehicle's charging management
system has interrupted the charging
process.
4
Charging starts as soon as the vehicle is ready
for charging: The LED indicator then flashes
blue.
The vehicle starts the charging process: The indicator on the vehicle's
charge point flashes blue.
Checking the charging status
An NFC transponder is located behind the BMW i logo. Hold an NFC-capable smartphone in front of
the logo to open the BMW 360electric website. When you have the BMW i Remote app installed on
your phone (available in all app stores), you can program the NFC transponder to open the app. You
can then easily check the charging status.
You can set individualised charging times via the onboard electronics of your BMW electric or plug-in
hybrid vehicle, as well as turn on your vehicle's air conditioning system in advance using the Wallbox
Pure. Please see your vehicle's owner's manual for details.
13
EN
Charging and vehicle climate timer
Completing the charging process
Step
Procedure
Note
1a
Vehicle is connected and charging: The LED indicator flashes blue.
The indicator on the vehicle's charge
point flashes blue.
1b
Vehicle is connected and charging is complete:
The LED indicator is illuminated in solid blue.
The indicator on the vehicle's charge
point: See vehicle's owner's manual.
2a
Ending the charging process:
The vehicle ends the charging proPress the Stop/Start button. The LED indicator
cess: The indicator on the vehicle's
is illuminated in solid green. If not, please refer to charge point is illuminated in white.
the Troubleshooting section (page 15).
Pressing the Stop/Start button again restarts the
charging process. The LED indicator flashes blue
as soon as charging actually begins.
2b
Charging halted by vehicle:
The LED indicator is illuminated in solid blue.
Possible reason:
- The vehicle interrupts the charging
process because a timer was programmed: The indicator on the
vehicle's charge point is illuminated in
white.
- The vehicle interrupts the charging
process because the battery is fully
charged: The indicator on the vehicle's
charge point flashes green.
3
Disconnect the charging cable from the vehicle:
The LED indicator is illuminated in solid blue. If
not, please refer to the Troubleshooting section
(page 15).
To release the plug lock: Open the vehicle using the remote control.
The connection between the vehicle plug and the vehicle is weather-proof. Therefore, when
charging is complete, you don't have to worry about disconnecting the plug in the presence of
moisture or snow.
Return the vehicle plug to the plug holder after charging to save yourself from unpleasant
bending or dirty hands the next time you charge.
14
Restarting and troubleshooting
The Wallbox Pure restarts automatically after a power failure:
The device first performs a self test. The LED indicator in the Stop/Start button is illuminated in blue,
green and red for one second each. Then the Stop/Start LED (1) is illuminated in blue; the Wallbox
Pure is again ready for operation.
Fault reporting
The LED in the Stop/Start button flashes red when an error is detected:
1
Press and hold the Stop/Start button for five seconds.
2
Then release the Stop/Start button to display the error code.
3
The LED in the Stop/Start button flashes: The colour indicates the source of the error.
4
After one minute, the LED in the Stop/Start button flashes red again until the error has been corrected.
5
If vehicle is connected, it will begin charging immediately.
EN
Repairs must only be performed by qualified personnel!
Please contact the Wallbox Installation Service.
15
Error codes in the LED indicator
LED status
Cause
Remedy
Notes
Red Yellow Red Yellow
Electronics
or contactor
1
Interrupt the power supply.
2
A trained technician must
check the contactor connections.
Wallbox Pure error
3
Re-establish the power
supply.
4
If the error code persists, contact the Wallbox
Installation Service.
1
Interrupt the power supply.
2
A trained technician must
check the charging cable connections to the
electronics.
3
Re-establish the power
supply.
4
If the error code persists, contact the Wallbox
Installation Service.
1
Interrupt the power supply.
2
A trained technician must
check the connections in the
Wallbox Pure.
3
Re-establish the power
supply.
4
If the error code persists, contact the Wallbox
Installation Service.
Red Blue Red Blue
Red Green Red Green
16
Cable connection
Charging
over-current
Wallbox Pure error
If the connections are
correct, the over-current is likely due to the
vehicle.
Cause
Remedy
Blue Green Blue Green
Control circuit
1
Interrupt the power supply.
2
A trained technician must
check the charging cable connections to the
electronics.
3
Re-establish the power
supply.
4
If the error code persists, contact the Wallbox
Installation Service.
Notes
EN
LED status
17
Care, maintenance and disposal
Do not use any aggressive solvents or cleaning agents
Clean the outside housing of the Wallbox Pure using a damp cloth as needed. Do not use any aggressive substances.
Hazard of aggressive solvents and cleaning agents!
Failure to follow these instructions will result in health and property damage!
Only use mild rinsing and cleaning agents to clean the Wallbox Pure (preferably those from
BMW).
Monthly safety test
You should trip/reset the main circuit breaker for the Wallbox Pure once every month to test the restart
process and ensure operating safety.
Hazard of electric shock, short circuit or overheating!
Failure to follow these instructions will result in death or serious injury!
Test the circuit breaker for the Wallbox Pure once every month.
Observe all disposal regulations
After decommissioning, please always dispose of the Wallbox Pure in compliance with all currently
valid disposal regulations.
Legal and health risks!
Failure to follow disposal regulations can result in legal charges and damage to the
environment!
Always dispose of the Wallbox Pure according to the respective regulations.
18
CE Declaration of Conformity
EN
The complete CE Declaration of Conformity (Low Voltage Directive LVD and Electromagnetic Compatibility Directive EMC) can be found on the following website of the manufacturer:
19
Mehr über BMW
www.bmw.de
www.bmw.com
Freude am Fahren
HRB8934401-01
01 29 2 355 292
09/2013
Z/Z
1.0