LED - EYPO

advertisement
Δ
hfii^oh
•Up to 100 Lumens Per Watt
•Harsh & Hazardous Duty
•L70 Value 80,000+ Hours
•Crisp White 5,000° Kelvin Light
LED
FLOODLIGHT
KFL SER IES • L IG H T I NG
FLOOD L IG H TS, 6 0 -1 25 W L E D, I NT RO DU C T I ON AND L OGI C
LED
TECHNOLOGY
Class I, Div. 2, Groups A,B,C,D
Class II, Div. 1&2, Groups EFG
Class III
Suitable for wet locations
Marine
NEMA 3, 4X, IP66
C
US
File LR11713
F EATU R ES- SPEC IF I CAT I O N S
TM
LED
Applications
LED Floods are designed for installations
where moisture, dirt, dust, corrosion and
vibration may be present, or NEMA 3 and
4X areas where wind, water, snow or high
ambients can be expected. They can be
used in locations made hazardous by the
presence of flammable vapors or gases or
combustible dusts as defined by the NEC.
Typical applications include manufacturing plants, and certain chemical and
petrochemical processing facilities,
sewage treatment plants, off-shore and
dockside installations, garages and
storage facilities
Compliances
• UL-8750 for LED lighting
• ANSI/UL 1598
• UL-844 Standard for lighting fixtures
for hazardous locations, Class I,
Division 2; Class II, Divisions 1
and 2; Class III
• CSA C22.2 no. 137-M1981 electric
luminairies for use in hazardous
locations
• Enclosed and gasketed
• NEMA 3, 4X, IP66
Materials
• Body, end caps and lens frame corrosion resistant copper-free aluminum alloy
with baked powder epoxy/polyester
finish, electrostatically applied for
complete, uniform corrosion protection
• All external hardware - stainless steel
• Thermal shock and impact resistant
glass lens
• High temperature silicone gasketing
• Trunnion heavy gauge galvanized
steel with painted finish
LED Flood Features and Standards
• Crisp White Light for Excellent
Color Rendering - Chromaticity
5000° K (CCT); approx. 70 CRI
• Energy Savings - High lumens per watt
• Long Life - 80,000 maintenance free
hours to 70% initial lumens
• Ambient suitability -40°C to 55°C
• Instant On - Including after power
interruption
• World Voltage 120 - 277VAC 50/60Hz
• Solder-LESS LED Board Connections Vibration Resistant
• LM80-08* Measurement of lumen
maintenance for LED light sources
• LM79-08* Certified “Absolute”
Photometry, including Chromaticity
Color for Solid State Lighting
• L70 Values - Industry Nomenclature
for Hours of use to 70% of initial Lumens
KFL with KFS-6
Slipfitter mount
on 2” pipe
Dark Sky Visor
KFL-DARK
* LM-xx are illumination Engineering Society Standards designed to promote uniformity in testing
procedures among test labs and manufacturers. For more information go to www.ies.org
Ca ta log N u mb e r L o g ic
KFL
125
KFL - Series Constant
Fixture Wattage
060 - 60W
070 - 70W
075 - 75W
085 - 85W
090 - 90W
105 - 105W
110 - 110W
125 - 125W
Voltage
30 - 120 - 277VAC 50/60Hz
33 - 347 - 480VAC 60Hz (85W to 125W models)
Options
F - Single Fuse1
FF - Double Fuse1
SP - Surge Protection
TB - Terminal Blocks
TBL - Terminal Blocks Looping
P1 - 120V Photocell, factory installed
P2 - 120V-277V Photocell, factory installed
P3 - 347V Photocell, factory installed
QD - Quick Disconnect
1Fusing not for Canadian or Marine Installations
30
XX
KFL SER IES • L I G H T I NG
FLOODLIGHTS, 60-125W LED, ORDERING & APPLICATION INFORMATION, DIMENSIONS, PHOTOMETRICS
Ordering Information and Ambient Suitability
Amps Approx
120/2773 L/W 4
0.5/0.2
90
0.6/0.3
100
120VAC
0.6/0.3
90
through
0.7/0.3
100
277VAC
0.8/0.4
90
50/60hZ
0.9/0.4
90
2
0.9/0.4
100
1.0/0.5
100
Catalog No.1 Wattage Voltage 2
KFL06030
KFL07030
KFL07530
KFL08530
KFL09030
KFL10530
KFL11030
KFL12530
60
70
75
85
90
105
110
125
C1D2 5
C1D2 5
Simultaneous
C2D1 5
L70
KFL 105W at 45°
40C
55C
40C
55C
40C
55C
T6
T6
T6
T6
T6
T4A
T6
T6
T5
T5
T5
T5
T5
T4A
T5
T5
T3C
T3C
T3C
T3C
T3C
T3C
T3C
T3C
T3C
T3C
T3C
T3C
T3C
T3C
T3C
T3C
T3C (EFG)
T3C (EFG)
T3C (EFG)
T3C (EFG)
T3C (EFG)
T3C (EFG)
Zone Lumens
0-30
1704
T3C (EFG)
T3C (EFG)
0-60
T3C (EFG)
T3C (EFG)
0-90
T3C (EFG)
T3C (EFG)
T3C (EFG)
T3C (EFG)
T3C (EFG)
T3C (EFG)
1 Shipping weight Approx. 30lbs
2 See logic for 347-480V availability
3 Amperage measured at 120VAC; 277VAC calculated
4 Approximate Lumens per Watt depending on configuration
5 Use 75° Supply Wire @40°C Ambient; 90 @55°C Ambient
Calculated
100,000 Hours to 70% Initial
80,000 Hours to 70% Initial
100 L/W Models
90 L/W Models
Photometric Data
Zonal Lumen Summary
%Lamp
%Fixt
N.A.
18.2%
5140
N.A.
54.8%
8307
N.A.
88.6%
90-120
1051
N.A.
11.2%
90-150
1066
N.A.
11.4%
90-180
1066
N.A.
11.4%
0-180
9373
N.A.
100%
.1
TM-21**
42,300 Hours Official Reported
36,100 Hours Official Reported
.5
5.0
.2
1.0
**TM-21 based values require very long duration testing. IES TM-21 “official reported” is based on the # of hours of LED
chip manufacturer’s LM-80 Testing (minimum 36,000, but continuing) at launch.
KFS-6
Slipfitter
KFCB
Cross Arm Mount
KFWB
Wall/Pipe Bracket
K4040
Wall Bracket
4041
Tenon Fitting
KFL Mounts and Accessories1
CATALOG NUMBER
DESCRIPTION
Steel Slipfitter for 2” Pipe (2-3/8” o.d.) Tenon. Slips 3.75” Over Pipe.
KFS-6
Heavy Duty Cast-Iron Crossarm Fitting for Horizontal Trunnion
KFCB
Heavy Duty Wall Mount and/or Pipe Clamp Fitting Clamps 2” Pipe (2-3/8” o.d.)
KFWB
Through 2-1/2” Pipe (2-7/8” o.d.)
Heavy Duty Steel Wall Bracket. (Must be with KFCB Crossarm Fitting).
K4040
Heavy Duty Steel Wall Bracket 2” Pipe (2-3/8” o.d.) Tenon Fitting.
4041
Wire Guard, 316 Stainless Steel
KFLG
10’ Stainless Steel Safety Cable with loop grip2
VMSC10
Dark Sky Visor, White Painted Aluminum3
KFL-DARK
Replacement Door and Lens Assembly
KFL-DOOR
1 Fittings available to adapt trunnion mount floodlights to crossarms, poles and walls. Must be ordered separately.
2 Drop limit 1’. Attaches to luminaire cable provision and to mounting structure.
3 Designed to eliminate uplight when aimed at 45°.
20’ MH, 45° Tilt, NEMA 7X7 Pattern
Chromaticity Prox 4974.9°K (CCT)
Certified Test Report BAL 16845
KFL 105W at 45°
w/KFL-DARK
Zonal Lumen Summary
Zone Lumens %Lamp
0-30
2379
N.A.
0-60
6807
N.A.
0-90
8442
N.A.
90-120
0.53
N.A.
90-150
0.53
N.A.
90-180
0.53
N.A.
0-180
8442
N.A.
Dimensions
.5
5
1
%Fixt
28.2%
80.6%
100.0%
0.0%
0.0%
0.0%
100%
.1
.2
Trunnion Mounting
Detail
Front
Side
20’ MH, 45° Tilt, NEMA 7X6 Pattern
Chromaticity Prox 4992.6°K (CCT)
Certified Test Report BAL 16846
FLOODLIGHTS/WALLPACKS FROM KILL ARK
SERIES
HIGHLIGHTS
LED
TECHNOLOGY
TM
Δ
SUITABILITY*
• LED 60-125W
• Up to 100 Lumens/Watt
• 5000°K White Light
• L70 50,000+ Hours
Class I, Div. 2, Groups A,B,C,D
Class II, Div. 1&2, Groups E,F,G
Class III
Suitable for wet locations
Marine
NEMA 3, 4X, IP66
• 150-1000W HID
• Harsh and Hazardous
Environments
• Elevated Ambients
Class I, Div. 2, Groups A,B,C,D
Class I, Zone 2, Groups IIC, llB, llA
Suitable for wet locations
NEMA 4X, IP66
ABS Type Approval
• 150-400W HID
• Marine Duty
• Stainless Steel Housing
Class I, Div. 2, Groups A,B,C,D
AEx nR/Ex nR
Class I, Zone 2, IIC, IIB, IIA
ABS Type Approval
• 50-400W HID
• Trunnion Mount for Lighting
Vertical & Horizontal Planes
• Explosion Proof NEMA 4X
Class I, Div. 1&2, Groups C,D
Class I, Zones 1&2, Groups llB, llA
NEMA 3, 4, 4X, 7(C, D)
Factory Sealed
KFL
KF
KF
EZ-T
KWP
NWP
• Wallpack Luminaire
• 70-175W HID
• Photocell Energy Saving
Option
• Non-metallic Wallpack
• 13-26W Fluorescent
• Harsh & Hazardous Duty
• Emergency Version
• Exit Accessories
Class I, Div. 2, Groups A,B,C,D
Zone 2, Groups IIC, llB, llA
Class I, Div. 2, Groups A,B,C,D
Class I, Zone 2, Groups IIC, llB, llA
Class II, Div. 1, Groups F,G
Class III
Marine
NEMA 3, 4, 4X; IP66
*See catalog data for complete ratings, certifications and series features
Δ
hfii^oh
3940 M.L. King Dr. St. Louis, MO 63113
TEL: (314) 531-0460 FAX: (314) 531-7164
www.hubbell-killark.com
RACO®
BELL® KILLARK® HAWKE® CHALMIT®
WIEGMANN®
SBKLF 09-12
©2012 Hubbell Incorporated (Delaware)
Download