Mercury Series
LED Emergency Explosion-Proof Light
Ex d e IIB T6 Gb
Ex tb IIIC T80°C Db IP66
Introduction
Features and Benefits
• Energy saving. Reduce the number of luminaires needed, providing excellent efficacy more light where you need it.
• Anti-glare, reduces glare in applications where the user may have direct visual contact with the light source.
• Shock and vibration resistant tempered glass, reduces the risk of premature failure.
• OSRAM LED source. High efficacy lumen output and high CRI.
• Driver module assembly - High efficiency LED drivers are designed to provide reliable operation in even the harshest environments.
• Copper -Free Aluminum enclosure, can endure 10J impact. IP66, can be used in
marine and wet locations-robust construction suitable for saltwater and corrosive
applications.
• Different installation methods.
• Safety chain design. Prevent any fall-off.
• High power factor,energy saving
• Ambient temperature from -20ºC to 40ºC.
Applications
• On-shore
• Off-shore Platform
• Petrochemical Units
Characteristic Details
Installation loop is designed with Anti-off
Set screw to ensure the safety. Perfect
heat sink design, providing an efficient
thermal path to the heat sink assembly.
OSRAM LED source,
high efficacy and
lumen output.
Explosion proof
aluminium alloy
enclosure, high
performance of antiimpact. Can endure
10J impact.
The LED is clung to the enclosure, which can
make the heat sink very fast, lower the junction
temp. Ambient Temp from -20°C to +40°C
Copper-Free Aluminum enclosure
Anti-corrosion. Suitable for different
applications.
Performance Properties
Product Definition
EX-
I
MY
XX
AC
XX
XX
ON
-E
TYPE
BRAND
SERIES
POWER
INPUT VOLT.
SIZE (mm)
CCT (K)
TYPES
AREA
EX
ExplosionProof
I
Industrial
MY
Mercury
18W
56W
AC100~277V
600
1200
WM-2800~3300K
NH-4700~5400K
CH-5400~6400K
ON
E
English
Main Performance Parameters
Product Type
Ex-IMY 18600
Ex-IMY561200
Ex-IMY18600H7V7WM-ON-E
Ex-IMY561200H7V7WM-ON-E
Ex-IMY18600H7V7NH-ON-E
Ex-IMY561200H7V7NH-ON-E
Ex-IMY18600H7V7CH-ON-E
Ex-IMY561200H7V7CH-ON-E
Normal
18
56
Emergency
18
18
P/N
Power (W)
Color Temp.
Warm White
Natural White
Cool White
Warm White
Natural White
Cool White
CCT (K)
2800 ~ 3300
4700 ~ 5400
5400 ~ 6400
2800 ~ 3300
4700 ~ 5400
5400 ~ 6400
82
70
70
82
70
70
Normal
1800
1800
1800
5000
5500
5500
Emergency
1600
1800
1800
1600
1800
1800
CRI
Luminous
Flux (lm)
Size (mm)
Weight (Kg)
Ex Mark
Rated Input Voltage (V)
Rated
Capacity (Ah)
Type
T6
AC 100 ~ 277
3.3
Lithium Battery
Back Up
More than 120 Minutes
Ambient Temp (°C)
Insulation
12
300 Cycles
Light Source
Cable Gland
6
Lifespan
Charge Time
(after full
discharge)
IP Code
1130*187*80
Ex de IIB T6 Gb
Temp. Classification
Batttery
600*187*80
Less than 6 Hours
OSRAM LED
-20 ~ +40
IP66
M25, NPT 3/4
I
Performance and Installation
Candela Distribution
S / MHwp : 2. 5 : 1
Installation Method
Size
Accessories
Optional Parts
NO
Installation
Accessories
1
Material
Weight (kg)
Qty
Bracket
Q235
0.8
2
2
Loop
Q235
1.2
2
3
Pipe Clamp
Q235
1.8
2
4
Stanchion
Bracket
Q235
2.6
2
5
Clamp Mount
Q235
3.0
2
Accessories
Picture
Service
Caution
1. To avoid the risk of fire, explosion, or electric shock, this product should be installed,
inspected, and maintained by a qualified electrician only, in accordance with all applicable
electrical codes.
2. To avoid electric shock, be certain electrical power is OFF before and during installation and
maintenance. Luminaire must be supplied by a wiring system with an equipment grounding
conductor.
3. To avoid burning hands, make sure lens and housing are cool when performing maintenance.
4. To avoid explosion:
a. Make sure the supply voltage is the same as the luminaire voltage.
b. Do not install where the marked operating temperatures exceed the ignition temperature of
the hazardous atmosphere.
c. Do not operate in ambient temperatures above those indicated on the luminaire nameplate.
d. All gasket seals must be clean.
e. Before opening, electrical power to the luminaire must be turned off. Keep tightly closed
when in operation.
Package Check
1. Check the carton and all the components according to the packing list.
2. Make sure the product is in good conditions
Transportation
Please keep this product from heavy mechanical shock, exposure to strong sunshine, throwing,
rolling and stress during transport.
Storage
Kept in dry,clean and well-ventilated ,non-corrosive medium warehouse,the ambient
temperature should be -40° to 55°.
After-Sales Service
Installation and maintenance must be according to the instruction. If customer can not deal with it by
themselves, please contact with sales department.
Contact
Chris Galliano
2198 Phillip Drive
Covington, LA 70433
www.ilsindustrial.com
Email: info@ilsindustrial.com