With the correct
selection and fit, eye
protection equipment
will prevent most of
these injuries.
EYE PROTECTION
Every year,
more than
4000 eye
injuries occur in
New Zealand
workplaces.*
*www.savesightsociety.org.nz
Don’t gamble with safety.
99
EYE PROTECTION
EMPLOYER RESPONSIBILITY
AS/NZS 1336:1997 - recommended
practices for occupational eye
protection states: “An eye safety
programme should be introduced
where persons at work are exposed to
a recognised risk of injury to the eyes.”
CONSIDERATIONS WHEN SELECTING SAFETY EYEWEAR
Hazard Management
COMFORT
HAZARDS
LENS TINTS
Mechanical
i.e. Dust, flying
particles, sparks,
blunt objects,
metal fragments etc.
REQUIREMENTS OF AN
EYE SAFETY PROGRAMME
EYE PROTECTION
STEP 1 – IDENTIFICATION OF RISK
Complete a documentated survey
of the workplace that looks at the
operations, hazards, risks and includes
employees experiences and opinions.
Chemical
i.e. Splashes,
gases and
vapours, steam.
COMPATIBILITY
WITH OTHER PPE
STEP 3 – SELECTION OF EYE PROTECTORS
The selected eye protectors must be
suitable to minimise the identified
hazards and comply with the relevant
requirements of AS/NZS1337.1 and
AS/NZS1338 Parts 1 to 3.
STEP 5 – M
AINTENANCE
The user of the eye protectors is
responsible to clean them, store them
correctly and replace if the protector
is damaged.
STEP 6 – PROMOTION AND EDUCATION
Employees require education about
the eye hazards that have been
identified in the workplace. Display
warning signs and posters to indicate
areas or tasks where the wearing of
eye protection is required.
100
Optical
i.e. Ultra violet,
infrared, visible
light, glare
Selection of eye protectors must be
determined by the hazards identified
in each work process.
CHOOSING THE CORRECT LENS TYPE
CLEAR
General purpose lens for use in good visibility conditions,
especially indoors.
AMBER/YELLOW
Enhances contrast. Ideal for low-light environments,
artificially lit areas, dawn and dusk.
INDOOR/OUTDOOR
SILVER
For moving from indoor to outdoor. Mirror coating helps
with glare.
SILVER MIRROR
For sunlight and glare conditions. Ideal for outdoors.
TSR GREY
Ideal for sunlight and glare. Full colour traffic signal
recognition.
SMOKE
For sunlight and glare conditions. Ideal for outdoors.
BROWN SCT400
Spectrum Control Technology. Ideal for sunlight and
glare. Full colour recognition.
BROWN/MACCHIATO
For sunlight and glare conditions. Ideal for outdoors.
GREEN
Ideal for working in the proximity of welding or in brightly
lit conditions.
ESP
Reduces dazzling and the harmful effects of blue light.
Perfect for indoor to outdoor use.
BLUE MIRROR
For sunlight and glare conditions. Ideal for outdoors.
POLARISED
Stops horizontal reflections and eliminating glare. Ideal for
outdoor applications around the water and driving.
GREY
Ideal for sunlight and glare.
BROWN POLARISED
Lenses adapt to light conditions. For outdoor use,
occasionally going into shade. General purpose.
GREY/GREEN
POLARISED
Lenses automatically adapt to changes in light
conditions. When exposed to UV the lenses darken.
EYE PROTECTION SIGN
CODE 183334P
LENS COATING
ENVIRONMENT
STEP 2 – CONTROL THE HAZARD
Use the Hierarchy of Controls –
Eliminate, Isolation, Minimise.
Eye protectors should be used in
conjunction with other hazard controls.
STEP 4 – ISSUE AND FITTING
Eye protection should be issued and
fitted to the wearer by a person who is
competent to select the correct size
and type.
Workers may be exposed to three
types of hazards in the workplace.
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
EYE PROTECTION
IMPACT RESISTANCE
All eye protection shall be capable of
withstanding impact from a specified
weight ball without cracking, detaching
or dislodging, breaking or coming into
contact with the eye or the head.
BI-FOCAL
SAFETY GLASSES
PRESCRIPTION
SAFETY EYEWEAR
Don’t compromise
on vision or safety
Employees who require corrective
glasses can be protected in
customised AS/NZS certified
prescription safety eyewear.
SPORT STYLE BI-FOCAL SAFETY
GLASSES GREY/CLEAR
MEDIUM IMPACT
Can withstand impact from an object
up to 45 meters per second.
HIGH IMPACT
Can withstand impact from an object
moving up to 120 meters per second.
Only achieved when whole face and
forehead are protected.
• Provides uncorrected vision in the upper
viewing field and correction for presbyopia
(lacking ability to focus on nearby objects)
in the reading segments
• Arms adjustable for length
• Available in five diopters
CLEAR
NZ Safety partners with a network
of optometrists throughout
New Zealand, providing eye
examinations and fitting services
to ensure your employees receive
the correct eyewear.
CODE 4
03011 1.0 diopter
403012 1.5 diopter
403013 2.0 diopter
403014 2.5 diopter
403015 3.0 diopter
GREY
CODE 4
05632 1.0 diopter
405634 1.5 diopter
405633 2.0 diopter
405635 2.5 diopter
EYEWEAR MARKINGS
Certified, safety eyewear must display
AS/NZS marking to identify compliance.
Manufacturer’s Trade Mark
CODE 403011 1.0 diopter
CODE 405632 1.0 diopter
Medium
impact
resistance
as per
AS/NZS 1337
XIO
HOYA LENS TECHNOLOGY
• S ingle vision, bi-focals and
progressive lenses available
• Clear, transition, tinted and
polarised lens options
• Chemical and scratch resistant
Phoenix safety material
Clear lens suitable for
outdoor use
DESCRIPTION
MARKINGS
Low impact
S optional
Medium impact
I or F
High impact
V or B
Extra high impact
A
Molten metal
& hot solids
M or 9
Splashproof
C or 3
Dustproof
D or 4
Gastight
G or 5
Outdoor use,
untinted
O
High temperature
‘ H’
EYE PROTECTION
LOW IMPACT
Can withstand impact from an object
moving at 12 meters per second.
• Hard coated (standard) and
anti-reflective coatings
CLASSIC STYLE BI-FOCAL SAFETY
GLASSES CLEAR
• Provides uncorrected vision in the upper
viewing field and correction for presbyopia
(lacking ability to focus on nearby objects)
in the reading segments
• Classic style has adjustable arms for length
and angle
• Available in five diopters
CODE 5
00947 1.0 diopter
500948 1.5 diopter
500949 2.0 diopter
500950 2.5 diopter
500951 3.0 diopter
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
101
EYE PROTECTION
LENS COATING
uvex coating
technology
pheos
EYE PROTECTION
• Excellent peripheral vision
• Lightweight by design with ergonomic features
• Arms with advanced ventilation system works with head movement
• No metal parts, fully recyclable
• Supravision (SV) extreme lens are Anti-Scratch outside, Anti-Fog inside
• THS lens Anti-Fog both sides
uvex supravision HC-AF
Lenses coated with uvex
supravision HC-AF are anti-fog on
the inside and extremely scratch
resistant on the outside, as well as
resistant to chemicals. The nano
clean effect ensures that the
lenses are very easy to clean and
less susceptible to dirt.
uvex HC 3000 – anti-scratch
uvex HC 3000 is extremely scratch
resistant. It is easy to clean due to
its Nano technology properties
which assist in repelling water and
dust. Currently there is no other
coating on the market like it.
uvex THS – superior anti-fog
uvex THS hydrophobic lens
coating prevents moisture
from accumulating to ensure
a constantly fog-free lens.
Spectacles and goggles with
uvex THS coating technology
are especially suitable
for environments with high
temperatures, humidity and
condensation.
CODE 407116 Grey SV HC-AF
CODE 408296 Clear THS
CODE 407448 Amber SV HC-AF
CODE 408295 Grey THS
CODE 408047 SCT Light Brown SV HC-AF
CODE 408048 Light Silver Mirror SV HC-AF
CODE 408010 Small Clear SV HC-AF
CODE 407115 Clear SV HC-AF
CODE 408011 Small Grey SV HC-AF
ACCESSORIES
CODE 4
08925 pheos guard
408926 pheos small guard
CODE 409996 pheos strap
uvex SAFETY EYEWEAR ARE ALL APPROVED TO AS/NZS 1337.1 – MEDIUM IMPACT PROTECTION AND HAVE 100% UV PROTECTION
102
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
EYE PROTECTION
uvex VARIOMATIC
One lens for various
UV light conditions
i3
• 3D ergonomic individual adjustment
• Metal free
• Softflex zones at nose bridge and temples
• Light weight - 30g
• Supravision (SV) extreme lens are Anti-Scratch
outside, Anti-Fog inside
• THS lens Anti-Fog both sides
super fit & super fit variomatic
CODE 4
08999 Clear SV HC-AF
CODE 405770 Clear THS
CODE 4
06754 Clear Variomatic
LIGHT CONDITIONS
variomatic clear
CODE 4
09000 Grey SV HC-AF
CODE 406753 Grey THS
CODE 4
06779 Grey Variomatic
variomatic grey
What will the lighting
conditions be today?
Many workers carry more than one
safety spectacle due to changing
weather and lighting conditions.
The uvex variomatic technology is
an all-in-one solution.
super f OTG
• Larger lens for exceptional eye coverage
and protection
• Excellent weight distribution
• 5 point lens inclination for individual fit
• HC3000 lens anti-scratch
both sides
• Fits over most prescription spectacles
• Ultra lightweight
• Slim side arms with soft ends for a pressure
free fit
• HC3000 lens anti-scratch both sides
• Variomatic lens coating darkens within 10 seconds on
exposure to sunlight
CODE 4
05766 Clear HC3000
CODE 4
08049 Clear HC3000
i-fit
The uvex variomatic technology
adjusts tint shades depending on
the lighting environment, 10 seconds
to darken and 30 seconds to go
back to its original state.
EYE PROTECTION
CODE 4
09348 Clear THS
• Super lightweight 20 grams
• THS lens Anti-Fog both sides
• Variomatic lens coating darkens within 10 seconds on
exposure to sunlight
No other lens adjusts
to UV conditions
this quickly!
CODE 4
08591 Clear Variomatic
CODE 4
08050 Grey HC3000
uvex SAFETY EYEWEAR ARE ALL APPROVED TO AS/NZS 1337.1 – MEDIUM IMPACT PROTECTION AND HAVE 100% UV PROTECTION
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
103
EYE PROTECTION
EYE PROTECTION
x-one
pursuit MK II
x-trend
• High fashion spectacle combined with
safety features and requirements
• Soft nose pads for comfort
• Available in grey and brown and
grey polarised anti-scratch lenses
• Large wraparound lens provide
20% extra protection
• No metal parts, fully recyclable
• HC3000 lens anti-scratch
both sides
• Safety, style and performance
• Cold formable arms for individual fit
• No metal parts, fully recyclable –
good for the environment
• HC3000 lens anti-scratch
both sides
• THS lens anti-fog both sides
CODE 4
10322 Grey Hard Coat
CODE 4
03251 Clear HC3000
CODE 253488
Clear HC3000
CODE 2
53488 Grey HC3000
CODE 4
03250 Grey HC3000
CODE 4
04207 Clear THS
CODE 2
53488
Amber THS
CODE 4
10323 Grey Polarised Hard Coat
CODE 4
10324 Brown Polarised
Hard Coat
astrospec
ultraspec
• High fashion spectacle combined with
safety features and requirements
• Stylish two-piece lens
• Polarised grey lens
• Outstanding peripheral vision &
side protection
• Lens inclination for a customised fit
• Length adjustable side arms
• HC3000 lens anti-scratch
both sides
CODE 410325 Polarised Hard Coat
CODE 251151 Clear HC3000
CODE 251399 Clear HC3000
athletic
skyguard NT
• Oxy-acetylene welding spectacle
• Compatible with other PPE
• Infradur plus shade 5 welding filter
• The anti-scratch coating minimises welding
sparks damage
• Soft and comfortable
• Positive seal against dust and particles
• 2 point lens inclination for individual fit
• 5 point length adjustable side arms
• THS lens anti-fog both sides
CODE 407125
CODE 405773 Clear THS
rally MK II
ultravision blacknight
• Oxy-acetylene welding goggle
• Black vented body
• Can fit over prescription spectacles
• Supravision (SV) extreme lens are
Anti-Scratch outside, Anti-Fog inside
CODE 2
51348 Goggle shade 5
253235 Replacement lens
• One piece polycarbonate lens
• Close fit for extra protection
• Excellent ventilation system
• No metal parts, fully recyclable
uvex SAFETY EYEWEAR ARE ALL APPROVED TO AS/NZS 1337.1 – MEDIUM IMPACT PROTECTION AND HAVE 100% UV PROTECTION
104
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
EYE PROTECTION
ultravision
• Extremely lightweight - just 43 grams
• Low profile with full peripheral vision
• Compatible with half face masks, (welding)
helmets and bump caps
• Supravision (SV) extreme lens anti-scratch
outside, anti-fog inside
• THS lens anti-fog both sides
CODE 4
05771 Clear SV HC-AF
CODE 405644 Clear THS
• Exceptional wearer comfort
• Ventilation system provides air exchange
• Fits over most prescription glasses
• Can be fitted with fixed lower face guard
or flip-up lower face guard
• Supravision (SV) extreme lens anti-scratch
outside, anti-fog inside
CODE 2
53227 Replacement lens clear
253286 Fixed lower face guard
• Exceptional comfort
• Sophisticated ventilation system
• Fits over most prescription spectacles
• Supravision (SV) extreme lens
anti-scratch outside,
anti-fog inside
CODE 2
51291 Clear SV
251305 Foam bound
CODE 2
53456 Clear SV HC-AF
CODE 2
51356 Clear acetate anti-fog
with fixed guard
CODE 4
05772 Grey SV HC-AF
ultrasonic
CODE 4
08051 Lower face guard
flip up (goggle not included)
CODE 4
03872 Type 1 fire goggle
CODE 2
53458 SCT Brown SV HC-AF
ACCESSORIES
1085
252042
EYE PROTECTION
carbonvision
252018
252077
402304
500440
252043
252026
BAGS & ACCESSORIES
252034
• Spec case and bag suits
all uvex spectacles
• Goggle case and bag suits
all uvex goggles
CODE 1085 Spec bag
1086 Goggle bag
252042 Spec case
402304 Goggle case
500440 Adjustable spec cord with foam sleeve
252043 Spec cord with break away safety clip
Q1012
LENS CLEANING
LENS CLEANING
• Specifically formulated for uvex lens coatings
• Unique formula protects the lens coatings
• Wall-mountable
• S pecifically formulated for uvex lens coatings
• Unique formula protects the lens coatings
• Wall-mountable
CODE 2
52018 Complete Station
252026 Replacement tissues
252034 Replacement lens cleaning fluid
CODE 2
52077 Lens cleaning Towelette pack of 500
Q1012 Disposable lens cleaning station
uvex SAFETY EYEWEAR ARE ALL APPROVED TO AS/NZS 1337.1 – MEDIUM IMPACT PROTECTION AND HAVE 100% UV PROTECTION
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
105
EYE PROTECTION
PLATINUM LENS COATING
Anti-fog and
anti-scratch
The new anti-fog and anti-scratch
PLATINUM coating is now available
on new models IRI-s and RUSH Plus,
giving greater safety, reliability and
comfort. This permanent coating on
both sides of the lens gives them a
high resistance to:
• Scratching
• Aggressive chemicals
• Fogging
RUSH PLUS
• Ultra-light weight
• Adjustable PVC nose bridge plus co-moulded temple arms for comfort and grip
• Platinum Coating - high performance anti-fog + anti-scratch coating system applied
on both sides of Clear, Smoke and Twilight
• Gasket and strap kit available
EYE PROTECTION
Bollé Safety platinum lens coating
exceeds the requirements of all
international standards, especially
the European Standard EN166 for the
K and N options.
* The standard K (anti-scratch)
requires a rate of <5 cdm².
The Platinum coating reduces the
scratching to 1.4 cdm²
* The N (anti-fog) requires resistance to
fogging for 8 seconds. The Platinum
coating delays the onset of fogging
for 2 minutes
CODE 410489 Clear
CODE 410490 Smoke
CODE 410491 ESP
CODE 410492 Twilight
CODE 410493 Contrast
CODE 410494 Gasket and Strap Kit
UNIVERSAL
IRI-S
• Soft nose bridge
• Exceptional eye coverage via the wide
fitting single piece lens
• ‘ALS’ anti-fog/anti-scratch coating
on both sides of Clear & Smoke lens
• Soft nose bridge for
long lasting comfort
• Fit: Asian unisex - medium/large
• Tilt adjustable temple arms and multi
adjustable B-flex nose bridge to fit a wider
range of faces
• Platinum Coating - high performance anti-fog
and anti-scratch coating system applied on
both sides of Clear and Smoke lenses
• Anti-fog coating on the inside
of ESP and Contrast lenses
CODE 409922 Clear
CODE 410485 Clear
CODE 410486 Smoke
CODE 407492 Clear
CODE 410487 ESP
CODE 410488 Contrast
CODE 407494 Twilight
CODE 409923 Smoke
RUSH
• Ultra light weight
• Built in brow protection
• ‘ALS’ anti-fog/anti-scratch coating
on both sides
• Fully recyclable:
All polycarbonate frame
with no metal parts
ALL EYEWEAR APPROVED TO AS/NZS 1337.1 – MEDIUM IMPACT PROTECTION
106
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
CODE 407493 Smoke
EYE PROTECTION
HUSTLER
VOODOO
• Rubber nose pads and EVA temple tips for
comfort and a non-slip fit
• Medium/Large fit
• ‘ALS’ anti-fog/anti-scratch coatings both
sides of Clear and Smoke lenses
• Grey/Green Polarised lens,
provides true colour definition
while fighting harsh glare
• Rubber nose pads and EVA temple tips for
superior comfort and a non-slip fit
• ‘ALS’ anti-fog/anti-scratch coating on
both sides of Smoke lens, ideal for high
humidity environments
• Brown Polarised lens, provides true
colour and contrast definition
while fighting harsh glare
CODE 407481 Clear
CODE 4
07484 Smoke, Black Frame
EXTREME
• Velvet frame finish over a lightweight
hydrated nylon frame
• Dual lens technology
• ‘ALS’ anti-fog/anti-scratch
coating on both sides of
Clear and Smoke lenses
• Flex spring hinges for a perfect fit
• Rubber temple grips and adjustable optical
nose pads for greater comfort and non-slip fit
• Excellent eye coverage with 160 degree
clear viewing
• ‘ALS’ anti-fog/anti-scratch
coating on both sides of
Clear and Smoke lenses
CODE 501068 Clear
CODE 402191 Smoke
HURRICANE
CODE 501071 Silver Flash
CODE 501069 Smoke
CODE 501070 Blue Flash
CODE 405532 Smoke
CODE 405533 ESP
CODE 405534 Clear
CODE 405535 Bronze
CODE 4
05849 Grey Polarised
CODE 405536 Amber
CODE 4
07487 Brown Polarised, Brown Frame
CODE 4
07485 CODE 407486 Grey/Green Polarised,
Brown, Brown Frame
Black Frame
CODE 4
07483 Grey/Green Polarised
• Superior comfort rubber nose pads and
temple tips
• Dual lens, half frame design providing
brilliant eye coverage
• ‘ALS’ anti-fog/anti-scratch coatings on
both sides of Clear, Smoke,
Amber and Bronze lenses
CODE 402190 Clear
EYE PROTECTION
CODE 407482 Smoke
SIDEWINDER
PROWLER
• Black, high gloss, hydrated nylon frame
• Co-moulded temple arms with TP rubber
for improved grip
• Dual lens technology
• ‘ALS’ anti-fog/anti-scratch
coatings on both sides of
Smoke lens
CODE 402846 Silver Flash
CODE 402846 Blue Flash
CODE 402846 Smoke
ALL EYEWEAR APPROVED TO AS/NZS 1337.1 – MEDIUM IMPACT PROTECTION
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
107
EYE PROTECTION
POSITIVE SEAL EYEWEAR
Featuring full EVA
eye seal to maximise
protection in dusty
environments
COBRA TEMPLE ARM
EYE PROTECTION
COBRA
• Each year in New Zealand, workers
suffer eye injuries from dust getting
into their eyes. This can cause the
need for on site first aid, or for more
serious harm, a visit to a health
provider for treatment and time
away from work.
• Ultra light weight
• Fully adjustable head strap
• Super low profile design
• ‘ALS’ anti-fog/anti-scratch coating on both
sides of Clear, Smoke and Twilight lenses
• Full EVA eye seal to maximise
protection against dust
• Ultra light weight
• Full EVA eye seal to maximise protection
against dust
• Tilt adjustable temple arms, maximises
individual fit.
• ‘ALS’ anti-fog/anti-scratch coating
on both sides of Clear, Smoke
and Twilight lenses
CODE 407488 Clear
CODE 407489 Smoke
CODE 409064 Clear
CODE 407490 Twilight
CODE 407491 Shade 5
CODE 409066 Twilight
CODE 409065 Smoke
EVA POSITIVE SEAL
• The Bollé safety spectacle Positive
Seal collection gives wearers
enhanced protection from primary
and secondary dust hazards and
this helps minimise further, those eye
injuries that are not a direct result of
medium impact penetration.
PRISM
RUSH SEAL
• Very light weight (30grams) including the
dust gasket
• Single piece, optically correct, 8 base and
distortion free lens
• ‘ALS’ anti-fog/anti-scratch coating on both
sides of Clear, Smoke and Bronze lenses
• EVA ‘positive seal’ to
maximize protection in
dusty environments
• Very light weight, including the dust gasket
• Adjustable PVC nose bridge plus comfort
bars in temple arms
• EVA ‘positive seal’ to maximize protection
in dusty environments
• ‘ALS’ anti-fog/anti-scratch coating on
both sides of Clear, Smoke and
Twilight lenses
CODE 409114 Clear
CODE 409115 Smoke
CODE 409253 Clear
CODE 409116 Bronze
CODE 4
09117 Replacement Gasket
CODE 409255 Twilight
CODE 409256 Replacement Gasket
TILT ADJUSTABLE ARMS
ALL EYEWEAR APPROVED TO AS/NZS 1337.1 – MEDIUM IMPACT PROTECTION
108
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
CODE 409254 Smoke
EYE PROTECTION
LOWRIDER
PRISM
• Rubber nose pads and temple tips for
superior comfort and a non-slip fit
• ‘ALS’ anti-fog/anti-scratch coating on Smoke
lens, ideal for high humidity environments
• Grey Polarised lens true
colour definition whilst
fighting harsh glare
BLADE
• Lightweight, all polycarbonate frame
• ‘ALS’ anti-fog/anti-scratch coating on both
sides of Clear and Smoke lenses
• Hard Coating on all flash lenses for
added strength and protection
• Ultra lightweight (only 22 grams)
• Single piece, distortion free lens
• Optically correct for greater visual accuracy
• ‘ ALS’ anti-fog/anti-scratch coating
on both sides of Clear, Smoke
and Amber lenses
CODE 405842 Smoke
CODE 400050 Clear
CODE 404208 Smoke
CODE 404209 Silver Flash
CODE 405841 Grey Polarised
CODE 400050 Silver Flash
CODE 404210 Clear
CODE 406775 Amber
LENS CLEANING STATION
LENS
CLEANING WIPES
• Formulated for use with Bollé lens
coating systems
• Comes with 470ml cleaning fluid and
1520 Tissues
• Formulated for use
with Bollé lens
coating systems
• Box of 100
CODE 406773
CODE 406772
CODE 400050 Smoke
CASES AND CORDS
• Protects your glasses
• Soft cloth bag that doubles
as a lens cleaner
CODE 3
209927 Soft Drawstring Pouch
406774 Semi-Hard Case
1601001 Power Cord
EYE PROTECTION
ACCESSORIES
VAPOUR DUO
BANDIDO
• Brilliant coverage for a wide variety of
face shapes
• Single piece, optically correct,
(10 base curve) distortion free lens
• ‘ALS’ anti-fog/anti scratch on
both sides of Clear, Smoke
and Amber lenses
CODE 400051 Clear
CODE 400051 Amber
BLAST
• Low profile and lightweight PVC frame with
polycarbonate lens
• ‘ALS’ anti-fog/anti-scratch on both sides of
the lens
• Designed to be worn
comfortably over spectacles
• Low profile and lightweight design with a
TPR frame
• Duo lens: 3.0mm AF/AS polycarbonate
outer lens, 0.5mm acetate inner lens with
anti-fog, twin equalisers and indirect lower
vents with closed cell foam
• Closed cell foam forms an
excellent face seal
CODE 406540 Rx adapter
CODE 405540 Clear
CODE 400051 Smoke
CODE 4
01329 Goggles with
mouthguard
CODE 405539 Smoke
CODE 4
01327 Foam bound
clear goggle
ALL EYEWEAR APPROVED TO AS/NZS 1337.1 – MEDIUM IMPACT PROTECTION
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
109
EYE PROTECTION
KAROO POLARISED
ATACAMA POLARISED
• Adjustable nose pads for optimal wearer fit
• Close fit wrap around style for excellent
coverage
• Smoke Polarised – Ideal in outdoor
environments
• Hard coat finish on both
sides of the lens
• Adjustable nose pads for optimal wearer fit
• Close fit wrap around style for excellent
coverage
• Smoke Polarised – Ideal in outdoor
environments
• Hard coat finish on both
sides of the lens
CODE 410525
CODE 410526
CODE 404455
MITY WIPES
DISPOSABLE LENS
CLEANING STATION
CODE SACT40
CODE 115711L
HAWK POLARISED
• Dual lens style
• Stylish grey frame
• Rubber nose pads and temple tips for
comfort and grip
• Polarised for clearer vision
in harsh glare
EYE PROTECTION
ACCESSORIES
LENS
CLEANING
TOWELETTES
• Pack of 500
CODE 404724
KITE
PEREGRINE
• Light weight design with soft temple arms
and nose pads for all day comfort and grip
• Deep fitting style for excellent eye area
coverage
• Wide temple arms for extended protection
area coverage
• Anti-fog/anti-scratch on both sides of
Clear lens
• Hard coat on both sides
of Smoke lens
• Light weight half frame design with soft
temple arms and nose pads for all day
comfort and grip
• Close fit wrap around style for excellent eye
area coverage
• Anti-fog/anti-scratch coating on both sides
of Clear lens
• Hard coat on both sides
of Smoke and
Amber lenses
CODE 409927 Clear
CODE 409929 Clear
CODE 4
10521 Indoor/outdoor
CODE 409928 Smoke
CODE 410519 Amber
CODE 409930 Smoke
HARRIER
• Super Hard Coat protection on both sides
of Clear and Smoke lenses
• Single piece wrap-around styling
• Rubber side arm tips for
comfort and grip
CODE 410522 Clear
CODE 4
10520 Indoor/outdoor
ALL EYEWEAR APPROVED TO AS/NZS 1337.1 – MEDIUM IMPACT PROTECTION
110
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
CODE 410523 Smoke
HERON
EAGLE
• High gloss frames
• Rubber nose bridge and arm tips for
comfort and grip
• Anti-fog on both sides of Clear lens
• Hard coat on both sides
of Brown Smoke lens
• Single piece lens
• Adjustable nose pad for fit and comfort
• Rubber side arm tips for comfort and grip
• Anti-fog on both sides of Clear lens
• Anti-scratch on both sides
of Grey and
Brown Smoke lenses
• Rubber nose pads and temple tips for
comfort and grip
• Dual lens, half frame design for better
eye coverage
• Anti-fog on both sides
of Clear and
Smoke lenses
CODE 405039 Clear
CODE 404458 Clear
CODE 403328 Clear
CODE 405040 Brown Smoke
CODE 404462 Brown
PELICAN
CODE 404457 Grey
CODE 403328 Blue Mirror
IBIS
FALCON
• Rubber nose pads and temple tips for
comfort and grip
• Dual lens style
• Anti-fog on both sides of Clear lens
• Anti-scratch on both
sides of Smoke lens
• Single piece wrap-around styling
• Close fitting for added protection
• Rubber side arm tips for comfort and grip
• Anti-fog on both sides of Clear lens
• Anti-scratch on both sides
of Grey Smoke and
Brown Smoke lenses
CODE 403331 Clear
CODE 404480 Clear
CODE 403331 Smoke
CODE 403328 Smoke
EYE PROTECTION
EYE PROTECTION
CONDOR
• High fashion frames
• Rubber nose pads and temple tips for
comfort and grip
• Anti-fog on both sides
of Smoke lens
CODE 403329
CODE 4
04482 Grey Smoke
EYE PROTECTION SIGN
CODE 4
03331 Orange Mirror
CODE 4
04725 Brown Smoke
CODE 183334P
ALL EYEWEAR APPROVED TO AS/NZS 1337.1 – MEDIUM IMPACT PROTECTION
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
111
EYE PROTECTION
Safety glasses are
designed to protect
your eyes from
impact by projectiles
When a fitted seal is introduced, the
wearer is then also protected from
secondary hazards such as dust.
EYE PROTECTION
The Rattler can be worn as a
spectacle or with the elastic
headband strap for high particulate
work environments.
VULTURE
• Light weight comfort with full protection
• Anti-fog on both sides of
Clear, Smoke and
Amber lenses
• Rubber side arm tips for comfort and grip
• Single piece wrap-around
• Anti-fog on both sides of Clear and
Amber lenses
• Anti-scratch on both
sides of Smoke lens
CODE 403327 Clear
CODE 403327 Smoke
CODE 404043 Clear
CODE 403327 Amber
CODE 403327 Blue Flash
CODE 404043 Amber
KESTREL
RATTLER SEALED
• One piece molded lens with EVA closed
cell foam seal
• Comes complete with interchangeable
temple arm and elastic headband strap
• Low profile design for a close fit to the face
• Excellent peripheral vision
• Anti-fog/anti-scratch on both sides
of Clear lens
PETREL
GOGGLE
• Comfort with full vision
• Wide head band for a pressure free fit
• Fits over most prescription spectacles
• Anti-fog on both sides
of Clear lens
• Comfort with full vision
• Wide head band for a pressure free fit
• Fits over most prescription spectacles
• Anti-fog on both sides
of Clear lens
CODE 409931 Clear
CODE 410524 Clear
CODE 405626 Clear
BUZZARD
DIRECT VENTED GOGGLE
SPLASH GOGGLE
• Single piece wrap-around
• Over spec or visitors spec
• Anti-fog on both sides
of Clear lens
• A general purpose directly vented goggle
• Or indirect venting for liquid splash protection
• Flexible PVC frame with broad face flange
• A general purpose directly vented goggle
• Or indirect venting for liquid splash protection
• Flexible PVC frame with broad face flange
CODE 1010L Clear direct venting
CODE 1022L Clear indirect venting
CODE 404046
ALL EYEWEAR APPROVED TO AS/NZS 1337.1 – MEDIUM IMPACT PROTECTION
112
CODE 404043 Smoke
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
EYE PROTECTION
ADAPTEC™
Adjust to fit
your face shape
ADAPTEC™
CODE407993 Narrow, Smoke
407997 Regular, Smoke
408001 Wide, Smoke
407992 Narrow, Amber
407996 Regular, Amber
408000 Wide, Amber
407994 Narrow, Mirror
407998 Regular, Mirror
408002 Wide, Mirror
CODE 407995 Regular, Clear
CODE 407996 Regular, Amber
CODE 407997 Regular, Smoke
CODE 407998 Regular, Mirror
The Adaptec™
is an adjustable
eyewear system
that can be
worn by the
widest range of
workers and still
deliver excellent
protection,
superior comfort,
customised
adjustability,
premium optics
and a stylish look.
ADAPTEC PROVIDES ONE STYLE WITH
THREE SIZES FOR A CUSTOMISED FIT
AND PERFORMANCE - NARROW,
REGULAR AND WIDE.
SP1000™ SEALED
• Durastreme dual coating technology,
Fog-Ban on the interior and Anti-scratch on
the exterior
• Ideal for dirty, high particulate work
environments such as grinding, chipping,
shaving and sanding
• Soft and flexible nasal pads conform to a
variety of facial profiles and minimise slippage
• Soft, high-quality face cushioning and
padded temple tips offer all-day comfort
• Removable arms allow for
fitting of adjustable flame
resistant headband
CODE 407220 Clear
CODE 407222 Yellow
CODE 407221 Grey
DURAMAXX®
• Modern low profile design
• Durastreme lens technology, anti-fog
inside, anti-scratch outside
• Fits over prescription spectacles
• Large panoramic field
of vision
CODE 406541 Clear
CODE 406542 Grey
EYE PROTECTION
CODE 4
07991 Narrow, Clear
407995 Regular, Clear
407999 Wide, Clear
XC
• Soft nasal flanges conform to
a variety of facial profiles
• Optional metal RX carrier for
wearers of prescription eyewear
• Hard coat or anti-fog
coatings to adapt to
any environment
CODE 5
00952 Clear hard coat
CODE 5
00980 Clear anti-fog
CODE 5
00981 Smoke anti-fog
CODE 4
01200 RX carrier for prescription insert
ALL EYEWEAR APPROVED TO AS/NZS 1337.1 – MEDIUM IMPACT PROTECTION
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
113
EYE PROTECTION
A700
EYE PROTECTION
• Universal nose bridge and soft temple tips
• Anti-fog coating prevents lens fogging in
humid environments
• Lightweight design
CODE 4
04211 Clear hard coat
CODE 4
04212 Grey hard coat
ICOM BLUETOOTH
CODE 4
09953 Brown Mirror
CODE 4
09954 Blue Mirror
• Bluetooth safety eyewear connects to Bluetooth enabled devices allowing communication
through to comfortable ear tips incorporated into the eyewear
• Noise cancellation technology built into dual microphones allows clear voice communication
even in high noise environments
•C
omes with both clear and grey lens tints to meet a variety of work environments and applications
• Lightweight at only 52 grams
CODE 4
08555 Clear anti-fog
Kit includes:
•H
oneywell ICOM with Internal
Rechargeable Lithium ion polymer battery
•U
SB micro charging cable (100-240V)
•C
omes standard with clear lens and grey
replacement lens
•H
ard cover carry case
•U
ser guide
ACCESSORY
ICOM REPLACEMENT EARTIPS
CODE 409952
CODE 4
09951 ICOM with kit
409952 Replacement ear tips
ANTI-FOG WIPES
• Effectively eliminates lens fogging
due to humid conditions
• For use on all plastic, glass and
polycarbonate lenses
CODE 402188 pack of 100
CHILL™
• Flexible temples to comfortably keep
eyewear in place
• Comfort moulded nose piece fits
most wearers
• Wrap around lens offers a
close fit with excellent
side protection
CODE 4
08024 Clear hard coat
CODE 4
08026 Silver Mirror hard coat
CODE 4
08025 TSR Grey hard coat
IMPULSE
• Ratcheting temples adjust the inclination
• Soft flexible nose piece reduces slippage
• Padded temple tips
for comfort
MILLENNIA SPORT™
• Lightweight dielectric frame with side and
brow protection
• Comfortable universal nose bridge
• Includes adjustable
break-away Flexi-Cord
CODE 4
10295 Clear anti-fog
CODE 4
10296 Smoke anti-fog
CODE 4
10297 Amber anti-fog
CODE 4
06543 Clear hard coat
ALL EYEWEAR APPROVED TO AS/NZS 1337.1 – MEDIUM IMPACT PROTECTION
114
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
CODE 4
06544 Grey hard coat
EYE PROTECTION
LIGHT VISION™II
• Lights mounted on each temple to provide
hands-free task lighting
• Ultra-bright LED beams that swivel and
adjust for directional convenience
• LED’s have battery life of up to 50 hours
• Lens provides anti-fog protection both sides
• Anti-fog coating on both sides
of lens
FAHRENHEIT™ SERIES
PHOTOCHROMIC™ GLASSES
• Lens reacts to UV light, lightens or darkens
depending on the light conditions
• Anti-scratch coating on both sides of lens
• Sleek wraparound design
CODE 408095
CODE 406792
SECUREFIT™ 200 SERIES
• Wide coverage wrap around design
• Elastomeric brow guard to protect from dust
• Comfortable spatula temples with soft tips
and an adjustable nose bridge
• 3M™ DX™ anti-fog coating on
both sides of lenses
CODE 409211 Clear
CODE 4
02985 Clear
402984 Clear foam bound
CODE 409212 Grey
• Integral side shields and brow protection
• Anti-fog & anti-scratch coating on
both sides of all lenses
• Lightweight frame
• Temples naturally adjust to individual
head sizes
• Secure, snug fit keeps eyewear in place
without slippage
• Anti-fog coating on
both sides of lens
CODE 409207 Clear
CODE 409208 Grey
CODE 410184 Clear
CODE 4
09209
Amber
CODE 4
09210 Indoor/outdoor
VIRTUA™ AP SERIES
COMFORT™ 2740 & 2741
CLASSIC™ 2720, 2721 & 2722
• Wraparound, sporty design
• Adjustable temple length and lens angle
• Soft temple tips
• Anti-fog & anti-scratch coatings
on both sides of lenses
• Slim nose bridge and flat temples for
improved compatibility with other PPE
• Anti-fog coating on both sides
of lenses
• Ideal for use with earmuffs
SX™ 2000 SERIES
CODE 501112 Clear
CODE 500049 Clear
CODE 501115 Clear
CODE 501116 Grey
CODE 501113 Grey
CODE 410183 Grey
EYE PROTECTION
MAXIM™ GT SERIES
• Aerodynamic shape with wide vision
• Indirect ventilation system prevents fog and
helps guard from liquids and dust
• Built in channel design to fit prescription glasses
• Anti-scratch and anti-fog coating on both
sides of lens
• Adjustable arms for comfort and fit
• DX™ anti-fog coating on
both sides of lenses
CODE 500049 Smoke
CODE 501114 Amber
ALL EYEWEAR APPROVED TO AS/NZS 1337.1 – MEDIUM IMPACT PROTECTION
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
115
WELDING PROTECTION
AUTO DARKENING
WELDING HELMETS
3M™ Speedglas™
Welding Helmet
Series 9100XX
• Made in Sweden with an industry
leading 3 year warranty on lens
• Largest viewing area on
the market
(73x107mm lens + side windows)
3M™ SPEEDGLAS™
WELDING HELMET 9100XX
3M™ SPEEDGLAS™ FLIP-UP
WELDING HELMET 9100XX FX
Exhaust vents to assist in removing
exhaled air.
Flip-up mechanism reveals a clear high
impact grinding visor.
CODE 410373
CODE 411342
EYE PROTECTION
ACCESSORIES
• H ighest possible optical
classification (1/1/1)
• H igh impact protection compliant
with Australian standards
(AS/NZS1337.1)
• Advanced TST (TIG Sensor
Technology) reacts down to an
industry leading 1 amp
• Peripheral side windows for
enhanced vision
• Weld, cut, outdoor, grind, hidden
arc and tack (AS/NZS1338.1)
410383
410380
410379
411339
411338
ACCESSORIES FOR 9100XX SERIES
CODE 4
10380 Lens cover outer STD, pack of 10
410382 Lens cover inner 9100XX, pack of 5
411339 Sweatband 9100 & 9100 FX, pack of 2
411338 Sweatband 100 & 9100 MP, pack of 2
410383 Pre-filter Adflo™, pack of 5
410384 Filter particle PSL Adflo™
410379 Visor plate 9100 FX, pack of 5
410384
410382
• S hades 3/5, 8, 9-13
116
SPEEDGLAS™ FLIP-UP
WELDING HELMET 9100XX FX AIR
WITH ADFLO™ PAPR
SPEEDGLAS™ FLIP-UP WELDING
& SAFETY HELMET 9100XX MP AIR
WITH ADFLO™ PAPR
Flip-up mechanism reveals a clear high
impact grinding visor (AS/NZS1337.1). New
upgraded Adflo™ is super light with one hour
rapid charge. Powered airflow delivery with
required minimum protection factor of 50
(AS/NZS1716). Two adjustable air flow settings
170/200 litres per minute.
Comfortable safety helmet provides
overhead protection (AS/NZS1801). New
upgraded Adflo is super light with one hour
rapid charge. Powered airflow delivery with
required minimum protection factor of 50
(AS/NZS1716). Two adjustable air flow settings
170/200 litres per minute.
CODE 411340
CODE 411341
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
WELDING PROTECTION
3M™ SPEEDGLAS™
WELDING HELMET
SERIES 100V
• Made in Sweden with an industry
leading 3 year warranty on lens
• High impact to Australian & New
Zealand Standards (AS/NZS 1337)
CODE 410363 Trojan Warrior
• Speedglas optical quality
and comfort
• TST (TIG Sensor Technology) reacts
down to 10 amps
• New smooth ratchet head harness
CODE 410364 Aces High
CODE 410365 X-terminator
• Shades 3/8-12 with grind function.
• Dark shades can be increased using
upgrade plates
EYE PROTECTION
CODE 410362 Ninja
ACCESSORIES
CODE 411337 Combat
CODE 410366 Razor Dragon
410371
410372
411338
ACCESSORIES FOR 100V SERIES
CODE 410367 Ice Hot
CODE 410368 Raging Skull
CODE 4
10372 Lens cover outer STD 100, pack of 10
410371 Lens cover inner 100 & 9002V, pack of 5
411338 Sweatband 100 & 9100 MP, pack of 2
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)
117
WELDING PROTECTION
E3000 PAPR
GALAXY
• Passive welding helmet with closable
flip-up cover lens. Shade 10.
• Comfortable & adjustable headgear in the
popular Galaxy helmet shell.
• AS/NZS 1337.1 High impact approved
• Flip-up for grinding mode, flip-down
for welding
EYE PROTECTION
CODE 4
04834 Galaxy welding helmet
404832 Inside cover lens pk 5
404831 Front cover lens pk 5
404833 Hard hat adapter
UNISAFE ADF
• Lightweight and durable with high
impact rating
• Adjustable variable shade auto
darkening lens
• Grinding mode option
• Solar/battery powered
• Certified to AS/NZS 1337.1:2010
CODE 4
10936
411357 Replacement lens inside
411358 Replacement lens outside
411359 Sweatband
OPTREL WELDCAP
• New innovation in welding protection
• Lightweight and comfortable at only
400 grams
• Variable Shades 9-12 with grind mode
• Suitable for all electric arc welding processes
• Rated to medium Impact
AS NZS 1337.1
CODE 411356
• P3 rated filter
• Adjustable three-level air flow from 150 to
250 l/min
• Cooling effect even at most extreme
ambient conditions
• Constant air flow thanks to smart sensor
controlled electronics
• Efficient battery management provides
operating time up to 20 hours
• Cost-saving filter system consisting of
pre-filter and particle filter
CODE 4
09955 PAPR with e680 helmet
409956 PAPR with Galaxy helmet
WELDING HELMET
• Shade 10
• Adjustable ratchet style headgear
• Lift front lens for clear viewing
• Filters lenses certified to AS/NZS 1338.1
CODE 1
10922L Welding helmet shade 10
110906L Helmet with muff flaps
WF42 Replacement filter shade 5-12
237604L Cover plate, clear glass
237655L Polycarbonate chipping lens
NNNL Cover lens, clear
CR39 Plastic
ultravision blacknight
• Oxy-acetylene welding goggle
• Black vented body
• Can fit over prescription spectacles
• Supravision (SV) extreme lens are
Hard Coat outside, Anti-Fog inside
CODE 2
51348 Goggle shade 5
253235 Replacement lens
TRACKER 2 AND COBRA
• An adjustable head strap improves fit
and protection
• ‘ALS’ anti-fog/anti-scratch coating on
both sides
• Rubberised eye seal provides exceptional
protection against dust and other particles
• Standard approved to AS/NZS 1337 for
medium impact protection and splash when
fitted with the head strap correctly adjusted
CODE 4
05845 Tracker 2 shade 3
405846 Tracker 2 shade 5
407491 Cobra shade 5
118
athletic
• Oxy-acetylene welding spectacle
• Compatible with other PPE
• Infradur plus shade 5 welding filter
• The anti-scratch coating minimises welding
sparks damage
WELDING GOGGLE
CODE 407125
CODE 401763
• Welding goggle with lift up front
• Ideal for oxy/acetylene welding
• Shade 5 lens
www.nzsafety.co.nz | 0800 NZSAFETY (0800 697 233)