Reset Form
Wall Forms® WF30C and WF30H
Full Face Recessed Mount, Round
revision 6/17/11 • kl_wf30_spec.pdf
Approvals:
Type:
Job:
Catalog number:
/
Fixture
/
Lens
/
Electrical Module
Finish
See page 2
/
Options
See page 3
Date:
Page: 1 of 3
Specifications
6E"
SEMI
RECESSED
(173.6 mm)
5B"
FULLY
RECESSED
(130.2 mm)
1L"
(44.5 mm)
10E"
(276.2 mm)
5"
(127.0 mm)
5E"
Full Face
Recessed Mount
FULLY RECESSED
WALL LINE
SEMI RECESSED
WALL LINE
(149.2 mm)
WF30 with LED
10"- 24"
(254.0 mm 609.6 mm)
BACK
Adjustable
Stud Mount
Brackets “H”
Hollow Wall
Models Only
L" NPT Conduit Taps:
“C” Concrete Wall Model: 2 in sides / 2 in bottom
“H” Hollow Wall Models: 2 in bottom Only
Housing:
Recessed Concrete: Die-cast, low copper (<0.6% Cu) aluminum alloy with
clear anodize under powder coat finish to match louver and face plate.
Integral junction box (21 cubic inch volume) with four L" NPT conduit taps.
Presswood niche cover provided as temporary protection against moisture.
Recessed Hollow Wall: Die-cast, low copper (<0.6% Cu) aluminum alloy
with clear anodize under powder coat finish to match louver and face plate.
Integral junction box (21 cubic inch volume) with four L" NPT conduit taps.
Presswood niche cover provided as temporary protection against moisture.
(HID): Supplied with adjustable stud mount brackets plus insulation detector
in place of one side conduit tap. Quick disconnect plug supplied for
electrical module.
Face Plate: Die-cast, low copper (<0.6% Cu) aluminum alloy with vertical and
horizontal double ribs covering the full hemisphere. Ribs are minimum
D" depth and F" thickness. Secures to housing with four stainless steel captive
socket head screws.
Lens: Molded and heat treated glass, F" minimum thickness with internal
sandblast. Retained in face plate and sealed with a one-piece silicone gasket.
Choice of smooth (S) or internal prisms (P).
Socket: (HID): Porcelain medium base socket rated 4KV. (Fluorescent): Plastic
GX24q-3/GX24q-4 base socket. No socket for LED.
Ballast: All components mounted on plate with quick disconnect plug.
(HID: HX-Reactor - High power factor with starting temperatures of -40°F. for HPS
and -20°F. for PMH lamp modes. (Fluorescent): Encapsulated with thermal cutoff.
Electronic with multi-voltage (108v to 305v) input, 50/60 HZ, High power factor
LED Optical System: A total of 9 LED emitters configured in a rectangular array
comprised together as a module. One (1) module for 9 LED version and two (2)
modules for 18 LED version. Available in 3500K and 5100K.
LED Driver: Rated for 9 or 18 LED. Universal voltage from 120 to 277V with a
±10% tolerance. -40ºF starting temperature. All drivers are Underwriters
Laboratories recognized.
Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal
thickness, applied over a titanated zirconium conversion coating; 2500 hour salt
spray test endurance rating. Standard colors are Black, Dark Bronze,
Light Gray, Stealth Gray®,Platinum Silver, or White. Custom colors are available.
Pour Items: Recessed housings, devoid of all electrical components. Protective
presswood niche covers are supplied to temporarily seal the open housings until
the electrical modules and face plates are ready to install. Quick disconnect plugs
supplied for electrical modules. For recessed hollow wall configurations,
insulation detectors supplied in place of one conduit tap for HID No insulation
is permitted above the housing or within 3" of sides and bottom. Detectors will cut
power if fixtures overheat due to insulation.
Finishing Items: Electrical modules and face plates. Each set of finishing items
shall be in one container, clearly marked with the fixture catalog number.
CAUTION: Fixtures must be grounded in accordance with national,
state, and/or local electrical codes. Failure to do so may result in serious
personal injury.
Light distribution
Full Face
Listings and Ratings
ETL1 to UL Standards 1598 & 8750
IP66 Rated
CE
25C Ambient
Suitable for wet locations
1
U.S. PATENTS: D385,054, D381,452, D378,621
KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Wall Forms® WF30C and WF30H
Full Face Recessed Mount, Round
revision 6/17/11 • kl_wf30_spec.pdf
Type:
Job:
Page: 2 of 3
Standard Features
Fixture
Cat. No.
WF30C
WF30H
Lens
Cat. No. S
P
Electrical Module
HPS = High Pressure Sodium
PMH = Pulse Start Metal
Halide
PL = Compact Fluorescent
LED = Light Emitting Diodes
Lamp Lamp Line
Watts Type Volts
70 PMH 277
WF30C for concrete walls
WF30H for hollow walls
Molded and heat treated glass, F" minimum thickness
with internal sandblast. Retained in face plate and
sealed with a one-piece silcone gasket.
Choice of smooth (S) or internal prismed (P)
Smooth
Prismed
Cat. Nos. for Electrical Modules available:
High Pressure Sodium
Pulse Start Metal Halide
50HPS120
50HPS277
50HPS347
70HPS120
70HPS277
70HPS347
50PMH120
50PMH277
50PMH347
70PMH120
70PMH277
70PMH347
Lamp ED-17, Clear
Socket Medium Base
ANSI Ballast S68
Type
ED-17, Clear
Medium Base
S62
ED-17, Clear
Medium Base
M110
ED-17, Clear
Medium Base
M98
For PMH, HPS and PL.
See footnote 2 below for LED
Compact Fluorescent
LED
42PL1
9L3KUV2
9L5KUV2
18L3KUV2
18L5KUV2
LED
N/A
LED
N/A
Lamp Compact Fluor.
Socket GX24q-4 Base
42PL Operates 26, 32, and 42 watt lamps at 120 thru 277 volts (50-60 Hz.)
1
For LED, 9L = 9LED Emitters; 18L = 18 LED Emitters; 3K = 3500K color temperature;
5K = 5100K color temperature; UV = Universal Voltage from 120 to 277V with a ± 10% tolerance.
2
Finish
Super TGIC powder coat
paint over a titanated
zirconium conversion
coating.
Color:
Black
Cat. No.: BL
Dark Bronze Light Gray Stealth Gray® Platinum Silver White Custom Colors2
DB
LG
SG
PS
WH CC
Custom colors subject to additional charges, minimum quantities and extended lead times.
Consult representative. Custom color description:
2
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Wall Forms® WF30C and WF30H
Full Face Recessed Mount, Round
revision 6/17/11 • kl_wf30_spec.pdf
Type:
Job:
Page: 3 of 3
Optional Features
Fusing
Cat. No.
SF
No Option
Single Fusing (SF) for 120V, 277V, and 347V primary.
Quartz Standby
Cat. No. QS
No Option
Integral electronic device energizes a T-4 mini-can
socket during lamp warm-up and after power
interruption. Socket de-energizes prior to the HID lamp
reaching full brightness. T-4 mini-can halogen lamp by
others; 100 watt maximum.
Emergency Battery
Back-up
Cat. No. EM
No Option
Internal battery pack provides 90 minutes of
supplemental light at 750 lamp lumens on 42 watt
compact fluorescent lamps only.
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Battery Back-up