M60 LED
Recessed Linear LED
Flanged Extrusion
_ 1L35 _
Series
M60 Recessed
Linear LED Flush End
(Flanged Extrusion
/Flangeless Endcaps)
(L6R2U
not to be used
with T-Bar ceiling)
L6R1U / L6R2U
1
1
2700K LW LED
optimized
3000K
white lens
3500K
4000K
Scale = 1 : 4
2
Suspension Clips (SH)
6
5
4
1. Housing - Continuous, 6063-T6 extruded
aluminum profile up to 12 feet long. Joined
with Connector Plus Joining System for ease
of installation and to ensure a uniform
appearance. For use in insulated ceilings,
designed for direct contact with thermal insulation.
2. Driver - Electronic Class 2 driver, universal for 120V/277V. Standard driver dimmable
with trailing edge dimmers, high efficiency,
PFC>0.95, soft start. Lutron A -Series
(DM3/DME), 0-10V Linear (DM) and 010V Logarithmic (DML) or DALI (DMD)
dimming may be specified as well.
3. LED Light Engine - High efficicacy LED
light engine equipped with brand-name
LEDs, available in 2700K, 3000K, 3500K or
Selux Corp. © 2013
TEL (845) 834-1400
FAX (845) 834-1401
www.selux.us
L6RxU-0713-01 (ss-v3.1)
01
2T
03
4T
05
6T
07
8T
1 ft.
2 ft. T-Bar
3 ft.
4 ft. T-Bar
5 ft.
6 ft. T-Bar
7 ft.
8 ft. T-Bar
Finish
WH
BK
SV
SP
White
Black
Silver
Specify
Premium
Color
Voltage
120
277
RUN Create Run
Runs can be pre-configured using various combinations in 1/4” steps,
starting at 8ft.
Pre-installed Rod (TS)
7
31/2"
(91mm)
31/2" (91mm)
(75mm)
(factory installed)
RC2 Rotating
Crossbars
PM Perimeter
Mount
Mounting Diagrams
(60mm)
3
SH Suspension
Clips
TS 1” Studs
Nominal
Length
_
Consult factory for less than 2 ft. fixture length. 2 3 ft. minimum when using with DM, DML, DMD, or EMN. 3Not available in combination with EMN.
23/8"
215/16"
Mounting
Nominal
Length
4000K. CCT tolerance within a 3-step
MacAdam ellipse.
4. Flange - 3/8" (10mm) wide flange runs full
lengths of both sides and is part of the main
extruded body. Specify continuous flange
(L6R1) or flush end (L6R2). Flush end not to
be used with T-Bar ceiling.
5. Shielding - LED Optimized white acrylic
diffuser lens.
6. Spring Steel Suspension Clips Supplied two places, located nominally every
4 ft. Support wires supplied and installed by
others.
7. Pre-installed 1" 1/4-20 Studs - Attached
to fixture, see p.3 for location details.
8. Coupling & Threaded Rod to Structure Supplied and installed by others.
9. Rotating Crossbar - For inaccessible ceilings, adjustable for ceiling thicknesses from
1/4" to 2". Supplied, (2-3) per fixture.
10. Steel Wall Bracket & 1/4-20 Rod Supplied, (2-3) per fixture, see p.3 for location
details. (Fasteners to wall and wall anchors
by others.)
Union Made Affiliated
with IBEW Local 363
NRTL Listed for Damp
Location (i.e. UL, CSA)
8
Rotating Crossbars (RC)
9
63/4"
(171mm)
11. Aluminum Wallbracket - Secured to
wall (fasteners and wall anchors by others)
and runs entire length of fixture. Also supplied for width of fixtures when supplied with
continuous flange. Allows for 1/8" gap
between flange and wall to create shadow
line allowing for unevenness of wall. See p.3
for location details.
12. Flex Whip - (not shown) Standard and
dimming wiring. See p.4 for details.
13. Stand-by Battery Pack - (not shown)
Mounted on top of and accessible through
fixture housing. See p.4 for details.
Linear Runs - Continuous run configurations are available in 1/4” steps, starting at
8ft. Round up length to nearest nominal foot
to generate order code. Suspension points
might not be symmetrical for certain run
length. Please consult factory if symmetrical suspension locations are required.
Interior Luminaire Finish - Selux utilizes a
high quality Polyester Powder Coating. All
Selux luminaires are finished in our Tiger
Drylac certified facility and undergo a five
stage intensive pretreatment process where
product is thoroughly cleaned, phosphated,
and sealed. Selux powder coated products
provide excellent salt and humidity resis-
For IC and Non-IC
Construction
Finish
DM1
_
Voltage
Options
Dimming (0-10V)
Linear
Dimming (0-10V)
Logarithmic
DML
1
DME1 Lutron Eco-System
Dimming
DM31 Lutron 3-Wire
Dimming
DMD1 Digital Addressable
(DALI) Dimming
CCEA3 Chicago Plenum
EMN1 Battery Pack
TB
T-Bar Length
(used for RUN only)
DL
Damp Location
Scale = 1 : 8
Perimeter Mount (PM)
10
41/2"
L6R2U
27
30
35
40
Single
Linear
LED
Shielding
Mounting
_
(105mm)
1L35
CCT
Shielding
_
31/2"
L6R1U
M60 Recessed
Linear LED Flanged
Extrusion
Light
Engine
Options
CCT
LW
(91mm)
Series
Light
Engine
_
Qty:
11
31/2"
Type:
(91mm)
Project:
tance as well as ultra violet resistance for
color retention. All products are tested in
accordance with test specifications for coatings from ASTM and PCI.
Standard interior colors are White (WH),
Black (BK), and Silver (SV). Selux premium
colors (SP) are available, please specify
from your Selux color selection guide.
5 Year Limited LED Luminaire Warranty Selux offers a 5 Year Limited Warranty to the
original purchaser that the M60 LED luminaire shall be free from defects in material
and workmanship for up to five (5) years
from date of shipment. This limited warranty
covers the fixture, LED driver and LED light
engine when installed and operated according to Selux instructions. Fixture suitable for
ambient temperature of 35° C (95° F). For
details, see “Selux Terms and Condition of
Sale.”
Listings and Ratings: Tested to IESNA
LM-79-08 and LM-80 test standards at
25° C ambient temperature.
For DoE Lighting
Facts labels, see p.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter
the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
M60 LED
Recessed Linear LED
Flanged Extrusion
Photometry
COEFFICIENTS OF UTILIZATION - Zonal cavity method
L6RxU / 350mA LED / 3500K CCT
217
Catalog #: L6R1U-1L35-35-LW-4T-120
Report #: LTL-24033-1
Lamp: 180 white LEDs
Total Lumens: 2453
Luminaire Effiicacy: 74 lm/W
Max Candela: 869 @ 0.5° from Vertical
Spacing Criterion (0-180): 1.26
Spacing Criterion (90-270): 1.26
Spacing Criterion (Diagonal): 1.38
435
0
5
15
25
35
45
55
65
75
85
90
652
869
0°
90°
Vertical Plane is parallel with the lamp.
Vertical Plane is perpendicular to the lamp.
CANDELA DISTRIBUTION
0
22.5
45
67.5
865
865
865 865
861
864
857 861
826
831
826 830
764
769
765 767
674
679
677 679
564
570
568 569
439
443
443 444
302
306
307 308
166
168
168 168
41
43
46
47
0
0
0
0
90
865
864
829
766
676
565
439
301
162
40
0
ZONAL LUMEN SUMMARY
ZONE
0-30
0-40
0-60
0-90
90-180
0-180
LUMENS %LAMP
668.8
1092.4
1924.8
2452.8
0
2452.8
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
%FIXT.
27.3
44.5
78.5
100.0
0
100.0
DOWNLOAD IES FILE:
http://www.selux.us/fileadmin/us/interior/ies_file/L60_IES.zip
Fixture Length
Energy Consumption for Non-Dimming Luminaires
Standard Driver
1ft
2ft
3ft
4ft
5ft
6ft
7ft
8ft
RUN
(approximate)
8.4W 15.9W 24.3W 33.0W 40.1W 50.8W 63.4W 69.7W 8.75 W/ft.
DM3/DME Drivers at 277V 17.7W 26.6W 38.0W 44.3W 56.9W 70.8W 77.2W 10.1W/ft.
DM/DMD Driver
Selux Corp. © 2013
L6RxU-0713-02 (ss-v3.1)
17.3W 25.9W 37.1W 43.2W 55.6W 69.2W 75.4W
9.9W/ft.
LED CCT Prorate Table
(Values based on 4ft. 1L35 Light Engine.)
CCT
3000K
3500K
4000K
Lumens
2233
2453
2540
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the
function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
M60 LED
Recessed Linear LED
Flanged Extrusion
Layout Dimensions
L6R1U and L6R2U Suspensions (TS, RC, PM, SH)
L6R1U and T-Bar Ceilings (TS, SH)
Nominal (4 foot shown) - Side view
Nominal (4 foot shown) - Side view
Suspensions
Outside Flange
Fixture Housing
Feed fits into 7/8" hole
Nominal (4 foot shown) - Bottom view
Nominal (4 foot shown) - Bottom view
2' typical
215/16"
(75mm)
C
L to CL of T-Bar
1L35 Single Linear LED
1’ individual
2’ individual
3’ individual
4’ individual
5’ individual
6’ individual
7’ individual
8’ individual
Outside Flange
12 /8" (315mm)
3
L6R1U/L6R2U
Fixture Housing
11 /16" (298mm)
11
L6R1U
C
L to CL of T-Bar
1 /8” (41mm)
N/A
6 /8” (155mm)
24" (607mm)
47 /8" (1215mm) 47 /16" (1201mm)
48" (1219mm)
71 /8" (1825mm) 71 /8" (1805mm)
72" (1829mm)
95 /8" (2435mm) 95 /8" (2415mm)
96" (2438mm)
3
33 /16" (856mm) 33 /16" (842mm)
11
7
3
5
54 /8" (1395mm) 54 /8" (1375mm)
7
7
1
1
87 /16" (2216mm) 86 /2" (2196mm)
5
7
1
1
L60U
Suspensions
N/A
23 /8" (607mm) 23 /16" (589mm)
7
Suspensions
Fixture Length (including endcaps)
Feed
L6R1U
Equal
N/A
N/A
5
1 /8” (41mm)
5
1
6 /8” (155mm)
1
6 /8” (155mm)
1
6 /8” (155mm)
1
6 /8” (155mm)
1
6 /8” (155mm)
Suspension clips (SH) located nominally every 4ft. Location can be adjusted in field.
1
L60U
Feed
3” (76mm)
4” (102mm)
2” (51mm)
2” (51mm)
2” (51mm)
2” (51mm)
2” (51mm)
2” (51mm)
For other lengths, lamping, continuous runs or configurations please specify overall length (in feet), accessories desired and sketch/drawing of
configuration. Selux will detail project drawings upon order and supply submittal drawings for approval. Individual fixtures cannot be field
joined. If you have any questions please contact Selux customer service or applications engineering for assistance (1-800-SELUX-CS).
Selux Corp. © 2013
L6RxU-0713-03 (ss-v3.1)
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the
function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
M60 LED
Recessed Linear LED
Flanged Extrusion
EMN Option / Flex Whips
M60 LED EMN Option
Stand-by Battery Packs mounted to top of fixture and can be maintained through fixture from below the ceiling.
For RUNS, please specify location of lit section (approx. 2ft.).
For Individual fixtures, the lit section will be located on the feed end of the luminaire.
23/4" (70mm)
Input
EMN-model #
ILB-2412
EMN Battery Pack
2.5W
Operation
Duration
90min
Fixture Lumen
Output
700 lm
M60 LED Flex Whip
For wiring diagram, see below.
3/8" Flexible Metal Conduit, 6' long
6" leads
Straight Conduit
Fitting on free end
90° Elbow Conduit Fitting
into 7/8" hole
Wiring
STANDARD
Standard
Wiring
FEED
DRIVER(s)
(xx WATTS-LED)
GREEN
WHITE
BLACK
DME
Lutron 3-Wire
Dimming
FEED
DRIVER(s)
(xx WATTS-LED)
GREEN
WHITE
BLACK
VIOLET
VIOLET/WHITE
Lutron
Eco-System
Dimming
Standard
Wiring
DM3
DME
DM, DML &
DMD
DM3
DM/DML/DMD
FEED
GREEN
WHITE
BLACK
ORANGE
FEED
GREEN
WHITE
BLACK
GREY (-)
PURPLE (+)
DRIVER(s)
(xx WATTS-LED)
DRIVER(s)
(xx WATTS-LED)
Dimming and
Digital Addressable
(DALI) Dimming
GREEN = Ground (Green) / WHITE = Neutral (White)
BLACK = Hot (Black)
*Where Applicable, these wire(s) are added to the STD. Above.
ORANGE = 3-Wire Dimming Control
VIOLET = ‘E1’ Digital Link Dimming Control
VIOLET / WHITE = ‘E2’ Digital Link Dimming Control
GREY = ‘E1’ Digital or 0-10V Dimming Control
PURPLE = (+) DALI or 0-10V Dimming Control
Selux Corp. © 2013
L6RxU-0713-04 (ss-v3.1)
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the
function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
M60 LED
Recessed Linear LED
Flanged Extrusion
Compatible Dimmers
Standard Drivers:
Compatible with reverse phase control, also known as “trailing edge” dimmers. Minimum dimming level down to 10%. Inrush current per driver is
4A/20µs. Please consult factory for details and compatibility.
Reverse phase control or “trailing edge.”
With reverse phase control, the dimmer starts to provide power immediatedly after the zero cross. Dimming is achieved by delaying the time
at which the dimmer stops conducting.
DM3/DME Drivers:
Equipped with Lutron Hi-lume A-Series. Please visit Lutron’s website at www.lutron.com for further information regarding dimmer and controller
compatibility. Minimum dimming level down to 1%.
DM Drivers:
Equipped with 0-10V dimming drivers for linear dimming curve. Minimum dimming level preset to 0.1%. Driver manufacturer recommends the
following dimmers, switches or dimming control systems.
Dimmer & Switches
Manufacturer
Lutron Electronics
Control Systems
Manufacturer
Lutron Electronics
Website
Type
Nova T - NTFTV
www.lutron.com/LEDtool Diva - DVTV
Diva - NFTV
GraphicEye - GRX-TVI w GRX3503
www.lutron.com/LEDtool Energy Savr Node - QSN-4T16S
TVM2 Module
DML Drivers:
Recommended Driver
Dimming Curve
Linear
Linear
Equipped with 0-10V dimming drivers for logarithmic dimming curve. Minimum dimming level preset to 0.1%. Driver manufacturer recommends
the following dimmers, switches or dimming control systems.
Dimmer & Switch
Manufacturer
Website
Type
Busch-Jaeger
www.busch-jaeger.de
2112U-101
Leviton Lighting Controls
www.leviton.com
IllumaTech - IP710-DLX
Jung
Lightolier Controls
Merten
Pass & Seymour
The Watt Stopper
Selux Corp. © 2013
L6RxU-0713-05 (ss-v3.1)
www.gb.jung.de
www.lightolier.com
www.merten.de
www.legrand.us
www.wattstopper.com
240-10
ZP600FAM120
5729
Recommended Driver
Dimming Curve
Logarithmic
CD4FB-W
DCLV1
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the
function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.