TIP-ON for doors
advertisement
TIP-ON for doors Technical data sheet www.blum.com TIP-ON for doors Ordering and planning information Product Description Handle-less furniture can be opened with a light touch thanks to the TIP-ON mecha- nical opening support system. The furniture can be closed again by simply pressing the front. Unsprung hinges are used for TIP-ON for doors along with magnets. With regard to the extended ejector with pre-set positions, when assembly is complete the door gap can be adjusted easily, without tools. TIP-ON can be adjusted so that it is the perfect match for your cabinet interior. TIP-ON is available in nickel finish (NI-L), silk white (SW), platinum grey (PG) and terra black (TS), giving you great freedom of design. It also blends in harmoniously with furniture interiors. Short version ▬▬TIP-ON short version with magnet ▬▬For overlay doors up to approx. 1300 mm height Colour variants SW PG TS 956.1002 ▬▬For drilling Ø 10 x 50 mm ▬▬Material: Nylon ▬▬Output path approx. 17 mm min 1.5 min 50 min 2.6 (3.1)* * min. 2.6 mm with glue-on catch plate * min. 3.1 mm with screw-on catch plate Long version ▬▬TIP-ON long version with magnet ▬▬For overlay doors starting at approx. 1300 mm height or inset doors Colour variants SW PG TS ▬▬For drilling Ø 10 x 76 mm ▬▬Material: Nylon ▬▬Output path approx. 38 mm 956A1002 * min. 2.6 mm with glue-on catch plate * min. 3.1 mm with screw-on catch plate Long version with bumper ▬▬TIP-ON long version with bumper ▬▬For hinges with springs* ▬▬No catch plate required** ▬▬For drilling Ø 10 x 76 mm ▬▬Material: Nylon ▬▬Output path approx. 38 mm Colour variants SW *A trial application is recommended PG 956A1006 TD-074/3 EN/12.15 © Copyright by Blum TS ** We recommend using a catch plate for fixing to very soft surfaces 2 TIP-ON for doors Ordering and planning information Screw-on catch plate ▬▬TIP-ON screw-on catch plate ▬▬Material: Steel, nickel plated ▬▬Incl. chipboard screws 609.1500 ▬▬For hard surfaces and/or MDF, Ø 2.5 mm pre-drilling and countersinking, if required TIP-ON for drilling Horizontal adapter plate Cruciform adapter plate 8 7.5 7.5 8 3*3* 3* FA FA FA 3* FA *F or screw-on catch plates we recommend positioning 3 mm away from TIP-ON. Colour variants Steel, nickel plated 955.1008S FA Front overlay Press-in catch plate ▬▬TIP-ON press-in adhesive plate ▬▬Material: Steel, nickel plated ▬▬Ø 11.5 mm ▬▬Pre-drilled Ø 5 mm TIP-ON for drilling Horizontal adapter plate 7.57.5 8 8 FAFA FAFA Cruciform adapter plate 88 FAFA Colour variants Steel, nickel plated 955.1008D FA Front overlay Glue-on catch plate ▬▬TIP-ON glue-on catch plate ▬▬Material: Steel, nickel plated ▬▬The surface of the front must be clean, oil-free and dry TIP-ON for drilling Horizontal adapter plate 7.57.5 FAFA Colour variants Cruciform adapter plate 8 8 8 8 FAFA FAFA Steel, nickel plated 955.1008 TD-074/3 EN/12.15 © Copyright by Blum FA Front overlay 3 TIP-ON for doors Ordering and planning information 14.5 Horizontal adapter plate – short version 20/17 14.5 ▬▬TIP-ON horizontal adapter plate ▬▬Assembly using chipboard screws Ø 3.5 mm or Ø 4 mm or with system screws ▬▬Material: Nylon ▬▬TIP-ON must be ordered sepa- NI-L SW PG TS 17 20 14 Colour variants 17 20 53 rately 956.1201 Horizontal adapter plate – long version 20 / 32 system screws ▬▬Material: Nylon ▬▬TIP-ON must be ordered Colour variants NI-L 79 SW PG TS 14 screws Ø 3.5 mm or Ø 4 mm, or 79 14 ▬▬TIP-ON horizontal adapter plate ▬▬Assembly using chipboard separately 956A1201 Cruciform adapter plate – long version 37 / 32 ▬▬TIP-ON cruciform adapter plate ▬▬Assembly using chipboard screws Ø 3.5 mm or Ø 4 mm, or 79 37 system screws Colour variants 50 ▬▬Material: Nylon ▬▬TIP-ON must be ordered 37 separately PG 956A1501 Colour variants 50 ▬▬Material: Nylon ▬▬TIP-ON must be ordered 11.5 32 system screws 11.5 5 32 79 37 5 screws Ø 3.5 mm or Ø 4 mm, or 14.5 ▬▬TIP-ON cruciform adapter plate ▬▬Assembly using chipboard 14.5 Cruciform adapter plate – long version 37 / 32 (EXPANDO) 37 separately PG 956A15E1 TD-074/3 EN/12.15 © Copyright by Blum 4 TIP-ON for doors Ordering and planning information Assembly position Optimal opening support is ensured when the TIP-ON unit is attached in the correct handle position. TD-074/3 EN/12.15 © Copyright by Blum This can deviate ± 300 mm vertically and up to a quarter of the cabinet width horizontally. 5 TIP-ON for doors Assembly, removal and adjustment Short / long version for drilling Assembly Glue-on catch plate Screw-on catch plate Press-in catch plate Glue-on catch plate Screw-on catch plate Press-in catch plate Glue-on catch plate Screw-on catch plate Press-in catch plate Horizontal adapter plate Assembly Kreuzadapterplatte Assembly Cruciform adapter plate -1 mm +4 mm TD-074/3 EN/12.15 © Copyright by Blum 6 Julius Blum GmbH Furniture Fittings Mfg. 6973 Höchst, Austria Tel.: +43 5578 705-0 Fax: +43 5578 705-44 E-mail: info@blum.com www.blum.com All content is copyrighted by Blum. Subject to technical modifications and changes to the range without notice. Printed in Austria · TD-074/3 EN-AL/12.15-1
