Penn Sheet Metal’s Flush Panel with Reveal is a interlocking panel system that is excellent for vertical applications. It provides a flush, uniform appearance with a
1” reveal and attaches using concealed fasteners.
Center-grooving is available if desired.
12” / 16”
Custom sizes are available
1”
1”
PHONE: 610-395-8214 / FAX 610-391-9069 421 Schantz Road Allentown, PA 18104
WWW.PENNSHEETMETAL.COM
PENN SHEET METAL
1” FLUSH PANEL with REVEAL
Profile Features
Test Data
Min. Length - 36”
No structural or uplift testing available
Base material and coatings data
available on request
Max. Length- 20’-0”
Panel Height – 1”
Panel Width -12”, 16”
Concealed Fastened
35 Year Finish Warranty Available
No Clip-Nail Flange Interlock
Stiffening Ribs available
Slotted Venting available in aluminum
Center Groove(s) available
Penn Sheet Metal’s roof, wall and soffit panels are available in a variety of materials, colors and finishes.
Both our steel and aluminum panels come in a large selection of colors to enhance your project. Standard
color offerings are comprised of 0.7 to 0.9 mil full strength 70% Kynar 500® / Hylar 5000® fluorocarbon
coating over a urethane primer of 0.2 to 0.3 mil finish on the finish side with primer and a washcoat on the
reverse side. The panels are also available in Galvalume Plus® steel. These finishes meet industry standards
and technology for flexibility, hardness and color retention. Testing and data available is upon request..
© 2012 PSMLV, Inc. t/a Penn Sheet Metal
All rights reserved.