International
Fiber
Systems
Incorporated
Installation/Operation Instructions
and Warranty Information for Models...
VIC5211M
VIC5211M-R3
VIC5211R
SERIES DESCRIPTION
This operating guide describes a family of International Fiber Systems, Inc. (IFS) fiber optic modems.
Not all modems have all of the features in this guide.
The VIC5211 series of interfaces are designed to operate with Aiphone LEM-1 Intercom Systems
(only). The VIC5211 series of interfaces are designed to operate with one 62.5/125 µ multimode fiber optic
cable and perform the following functions: (1) transmit and receive one bi-directional audio signal between an
Aiphone LEM-1 master and one compatible door-station, (2) transmit and receive one video signal from a
CCTV camera located at the “door-station” end of the link, and (3) transmit and receive one contact closure
from the “master-end” to the “door-station” end of the link.
PART NUMBER DESCRIPTION
VIC5211M SERIES
VIC5211M
VIC5211M-R3
AIPHONE LEM-1 MASTER TRANSCEIVER: 850/1300 nm, ONE MULTIMODE FIBER
AIPHONE LEM-1 MASTER TRANSCEIVER: 850/1300 nm, ONE MULTIMODE FIBER, RACK
MOUNT
VIC5211R SERIES
VIC5211R
AIPHONE LEM-1 REMOTE TRANSCEIVER: 850/1300 nm, ONE MULTIMODE FIBER
COMPATIBILITY CHART
MASTER
VIC5211M
VIC5211M-R3
COMPATIBLE REMOTE
VIC5211R
VIC5211R
POWER CONNECTION
(a) Stand-alone Modules:
VIC5211M SERIES
24 VAC C.T. INPUT
PIN 1
12 VAC
PIN 2
GROUND
PIN 3
12 VAC
VIC5211R SERIES
12 VDC INPUT
PIN 1
18 VAC
PIN 2
No Connection
PIN 3
18 VAC
(b) –R3 Modules:
All “-R3” models receive power from the back plane of the R3 rack. Insert the “-R3” unit into any
available R3 rack slot such that the female 3-pin connector on the back of the module engages the companion
male connector of the back plane. The red power LED will glow when voltage is applied to the unit.
International Fiber Systems, Inc.
16 Commerce Road • Newtown, Connecticut 06470 USA • Tel: 203.426.1180 • Fax: 203.426.3326
5/27/98
AIPHONE CONNECTION
VIC5211M SERIES
PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
GROUND
CALL BUTTON
CALL BUTTON
SPEAKER
SPEAKER
RELAY
VIC5211R SERIES
PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
PIN 7
SPEAKER
SPEAKER
GROUND
CALL BUTTON
CALL BUTTON
RELAY
RELAY
FIBER OPTIC CONNECTION
Select a quality fiber optic cable containing 62.5/125 fiber. Attach ST style fiber optic connectors using
the connector manufacturer's recommended procedures. Connect the fiber optic cable from the ST
connector marked "OPTICAL CABLE" on the VIC5211M series module to the ST connector marked
“OPTICAL CABLE” on the VIC5211R series module.
CAMERA CONNECTION
Attach a 75-ohm coaxial cable (terminated with BNC connectors) from the video output BNC connector
of the camera to the "VIDEO IN" BNC connector on the VIC5211R series module.
MONITOR CONNECTION
Attach a 75-ohm coaxial cable terminated with BNC connectors from the video input connector of the
monitor to the "VIDEO OUT" connector on the VIC5211M series module.
MICROPHONE GAIN & SPEAKER VOLUME ADJUSTMENTS
Both “MICROPHONE GAIN” and “SPEAKER VOLUME” potentiometers are located on the VIC5211M
modules. Adjust either potentiometer for optimum performance.
MOUNTING STAND-ALONE UNITS
Hold the VIC5211M or VIC5211R series module against the mounting surface and mark the locations of
the keyhole slots on the rear mounting brackets. Install mounting screws into keyhole marks, allowing leeway
under the screw heads for the box to be mounted. Mount the brackets over the screws, slide, and tighten.
International Fiber Systems, Inc.
16 Commerce Road • Newtown, Connecticut 06470 USA • Tel: 203.426.1180 • Fax: 203.426.3326
5/27/98
Simplex multimode
fiber optic cable
VIC5211M
VIDEO INTERCOM MASTER
SPEAKER VOLUME
OPTICAL
CABLE
MICROPHONE GAIN
REMOTE RELAY CONTROL - 6
ifs
SPEAKER
International
-5
-4
Fiber
CALL BUTTON
Systems
-3
-2
Incorporated
-1
203.426.1180
VIDEO OUT
AGC
24 VAC
CENTER
TAPPED
POWER
AC - 3
-2
AC - 1
Blue
Green
Brown
Video
monitor
Coax cable
SPEAKER VOLUME
Brown
VIC5211R
1-
VIDEO INTERCOM REMOTE
2 - N.C. 18 VAC @ 16VA
Blue
31-
SPEAKER
23 - GRD
456-
CALL BUTTON
RELAY
7-
ifs
International
Fiber
Systems
Incorporated
OPTICAL CABLE
203.426.1180
POWER
CARRIER DETECT
VIDEO INPUT
Video Source
MICROPHONE VOLUME
Coax cable
Note: To verify the number of fiber optic cables, and fiber optic cable types
of other models within this series, check the compatibility chart and part
number description sections within this manual.
one 62.5/ 125 µ multimode
fiber to VIC5211R
Gate Release
NO Switch
coaxial cable to monitor
To LEM Master
Screw Terminal "E"
To LEM Master
Station Screw Terminals 1-5
ifs
203.426.1180
International
Fiber
Systems
Incorporated
www.ifs.com
DRAWING NAME
VIC 5211M
Field Connections to
Aiphone LEM Master
Researched by the IFS Technical Support Group this drawing was assembled and at
the time of publication is believed to be accurate. This information is the property of
IFS and is subject to change at any time. For the current release of this drawing
contact the IFS Technical Support Group at 1 888 999 9437
Or visit the IFS web site at www.IFS.com
Drawing Number
AI0004RA
Revision
Release Date
May1 1999
Revision Date
A
one 62.5/ 125 µ multimode
fiber to VIC5211R
Gate Release
NO Switch
coaxial cable to monitor
Note: See Drawing AI0003RA
for Enlarged Connection
Drawing of PC359B
To NEM Master Station Screw Terminal 1 - 40
or
LEF Master Station Screw Terminal 1 - 20
ifs
203.426.1180
International
Fiber
Systems
Incorporated
www.ifs.com
DRAWING NAME
VIC 5211M
Aiphone PC 359B Field Connections
Aiphone LEF & NEM Masters
To NEM Master Screw Terminal "E"
or
LEF Master Screw Terminal "E"
Researched by the IFS Technical Support Group this drawing was assembled and at
the time of publication is believed to be accurate. This information is the property of
IFS and is subject to change at any time. For the current release of this drawing
contact the IFS Technical Support Group at 1 888 999 9437
Or visit the IFS web site at www.IFS.com
Drawing Number
Release Date
AI0001RA
May 1 1999
Revision
A
Revision Date
Screw Terminal
2 Screw Terminal
3 Screw Terminal
4 Screw Terminal
5
9
connections to
VIC5211M
8
7
6
5
4
3
2
1
ifs
203.426.1180
International
Fiber
Systems
Incorporated
www.ifs.com
To NEM Master Stations Screw Terminals 1 - 40
or
LEF Master Stations Screw Terminals 1 - 20
DRAWING NAME
VIC 5211M
Aiphone PC 359B Field Connections
Aiphone LEF & NEM Master
To NEM Master Screw Terminal "E"
or
LEF Master Screw Terminal "E"
Researched by the IFS Technical Support Group this drawing was assembled and at
the time of publication is believed to be accurate. This information is the property of
IFS and is subject to change at any time. For the current release of this drawing
contact the IFS Technical Support Group at 1 888 999 9437
Or visit the IFS web site at www.IFS.com
Drawing Number
AI0003RA
Revision
Release Date
May 1 1999
Revision Date
A
Aiphone LED
Substation
To LED
Screw Terminal "-"
Remove Shorting
Jumper Connecting
"E" and "-"
To LED
To LED
Screw Terminal "E" Screw Terminal "1"
18 VAC
Gate Release
one 62.5/ 125 µ multimode
fiber to VIC5211M
coaxial cable to camera
ifs
203.426.1180
International
Fiber
Systems
Incorporated
www.ifs.com
DRAWING NAME
VIC 5211R
Field Connections to an
Aiphone LED Substation
Researched by the IFS Technical Support Group this drawing was assembled and at
the time of publication is believed to be accurate. This information is the property of
IFS and is subject to change at any time. For the current release of this drawing
contact the IFS Technical Support Group at 1 888 999 9437
Or visit the IFS web site at www.IFS.com
Drawing Number
AI0002RA
Revision
Release Date
May 1 1999
Revision Date
A
International Fiber Systems, Inc.
LIFETIME WARRANTY
INTERNATIONAL FIBER SYSTEMS, INC. (IFS) warrants to the
original purchaser that all IFS manufactured products shall be free from
defects in material or workmanship at the time of shipment.
LABOR AND PARTS: From the date of purchase to the original user, if
this product is determined to be defective, IFS will repair or replace the
product at no charge.
Our obligation under this warranty is limited only to the repair or
replacment of any of our products, providing said products are used within
the specified ratings and applications, and said products are applied in
accordance with good engineering practices, and providing said products are
proved by our examination to be defective.
This warranty does not extend to any IFS products which have been subject
to acts of God, accident, misuse, abuse, neglect, improper application or
installation, improper operation or maintenance, connection to an improper
voltage supply or to materials which have been altered or repaired outside of
an authorized IFS factory repair center.
This warranty shall constitute the fulfillment of IFS’ liability. IFS shall not
be liable for any incidental or consequential damages or breach of any
express or implied warranty on this product, except to the extent prohibited
by applicable law. Any implied warranty of merchantability or fitness for a
particular purpose of this product is limited in duration to the duration of
this warranty.
Exclusions:
Power transformers, batteries, or cosmetic damage.
16 COMMERCE RD • NEWTOWN, CT 06470 • TEL: 203.426.1180 • FAX: 203.426.3326