QS series
Snap-in Panel Mount LED indicators
The QS series offers snap-in panel mount LED indicators
with colored diffused flat lenses, for typical replacement
of filament and neon indicators. High brightness LEDs
are up to 240 times brighter than standard and can be
seen in direct sunlight. Typical applications include
domestic and commercial appliances, catering
equipment, fire alarm panels, surge protectors, and
battery chargers/power supplies.
KEY FEATURES
6mm, 8mm, 10mm and 12mmØ cut-out sizes
Front panel snap-in mounting requires no additional hardware
Colored diffused flat lenses
Voltage range: 2VDC – 220VAC
Standard intensity diffused LEDs or high brightness LEDs for daylight viewing
Bi-color LED option
UL496 recognized component
www.apem.com
QS series
Snap-in Panel Mount LED indicators
OPTION SELECTION
QS
SERIES
MOUNTING HOLE
6
= 6mmØ
8
= 8mmØ
TERMINALS
TYPE OF ILLUMINATION
1 = Solder lug/faston
XX = Fixed Light
3 = Wires
YY = Bi-color
10 = 10mmØ
12 = 12mmØ
VOLTAGE
LED COLOR
R = Red
02
= 2VDC
G = Green
12
= 12VDC
Y = Yellow
24
= 24VDC
B = Blue
28
= 28VDC
O = Orange
110 = 110VAC
W = White
220 = 220VAC
HR = High Brightness Red
HG = High Brightness Green
HY = High Brightness Yellow
HB = High Brightness Blue
HO = High Brightness Orange
HW = High Brightness White
RG = Red/Green
TECHNICAL CHARACTERISTICS
• Gold faston terminal denotes Anode (+), silver terminal denotes Cathode (-).
• Standard wire length is 200mm, red wire denotes Anode (+), black wire denotes Cathode (-).
For other wires lengths consult APEM (6mm and 8mm use 24AWG, 10mm and 12mm use 22AWG).
• For LEDs with alternative voltages consult APEM.
• Bi-color LEDs, by connecting to gold faston (+) one color is produced, by reversing the supply voltage
another color is produced – bi-colors are available up to 28VDC (AC products not available).
• Take care if soldering to the faston terminals.
• All 110VAC and 220VAC LED indicators will be supplied with high brightness LEDs.
• 2VDC (02) versions are resistorless – please pay attention to the forward voltage.
• Flashing LEDs are available as a special option.
Note:
The company reserves the right to change specifications without notice.
www.apem.com
QS series
Snap-in Panel Mount LED indicators
DIMENSIONAL DRAWINGS
SOLDER LUG/FASTON
Ø7.20
(0.28)
19.00
(0.75)
19.00
(0.75)
1.34
(0.05)
Ø7.20
(0.28)
1.34
(0.05)
6mmØ
(0.24)
WIRES
6.00
(0.24)
2.0 X 0.5 FASTON TAB
Ø5.90
(0.23)
GOLD TAB..ANODE
RED WIRE..ANODE
BLACK WIRE..CATHODE
200.00
(7.87)
SILVER TAB..CATHODE
Ø5.90
(0.23)
RED WIRE..ANODE
BLACK WIRE..CATHODE
Ø7.90
(0.31)
200.00
(7.87)
2.8 X 0.8 FASTON TAB
10.00
(0.39)
9.35
(0.37)
SILVER TAB..CATHODE
Ø10.00
(0.39)
26.50
(1.04)
1.50
(0.06)
Ø10.00
(0.39)
26.50
(1.04)
1.50
(0.06)
8mmØ
(0.31)
GOLD TAB..ANODE
1.75
(0.07)
Ø12.00
(0.47)
Ø12.00
(0.47)
26.50
(1.04)
26.50
(1.04)
10mmØ
(0.39)
1.75
(0.07)
Ø7.90
(0.31)
10.00
(0.39)
9.35
(0.37)
2.8 X 0.8 FASTON TAB
Ø9.85
(0.39)
GOLD TAB..ANODE
RED WIRE..ANODE
200.00
(7.87)
SILVER TAB..CATHODE
BLACK WIRE..CATHODE
2.00
(0.08)
Ø14.00
(0.55)
Ø14.00
(0.55)
26.50
(1.04)
26.50
(1.04)
12mmØ
(0.47)
2.00
(0.08)
Ø9.85
(0.39)
Ø11.85
(0.47)
SILVER TAB..CATHODE
GOLD TAB..ANODE
Notes:
Images shown are for illustration purposes only.
Dimensions in mm/(inch)
Note:
The company reserves the right to change specifications without notice.
www.apem.com
RED WIRE..ANODE
200.00
(7.87)
10.00
(0.39)
9.35
(0.37)
2.8 X 0.8 FASTON TAB
BLACK WIRE..CATHODE
Ø11.85
(0.47)
QS series
Snap-in Panel Mount LED indicators
SPECIFICATIONS
OPTICAL SPECIFICATIONS
COLOR
Red
Green
Yellow
Blue
Orange
White (clear)
INTENSITY
STD LED (mcd)
FORWARD
VOLTAGE (V)
25
20
20
800
30
1200
INTENSITY
HIGH BRIGHTNESS (mcd)
2.0
2.2
2.1
3.3
2.0
3.3
VOLTAGE
2VDC (no resistor)
12VDC
24VDC
28VDC
110VAC
220VAC
FORWARD
VOLTAGE (V)
6000
1200
380
1600
4100
2500
2.2
3.3
2.0
3.3
2.2
3.3
OPERATING
VOLTAGE
OPERATING
CURRENT
(min to max)
(typical all types)
1.8
10.8
21.6
25.2
99
207
to
to
to
to
to
to
2.5VDC
13.2VDC
26.4VDC
30.8VDC
130VAC
253VAC
20mA*
20mA
20mA
20mA
6mA
3mA
*Customer to supply resistor for desired operating current
TECHNICAL CHARACTERISTICS
Max reverse voltage
Viewing angle
Life expectancy
Operating temperature range
Storage temperature range
Panel thickness (preferable)
–
–
–
–
–
–
5V
30° (standard LED), 45° (high brightness LED)
100,000 hours
-30°C to +85°C (-22°F to 185°F)
-40°C to +100°C (-40°F to 212°F)
0.8mm (0.031”) – 1.6mm (0.062”)
MATERIALS
Lens
Body molding
Solder lug/faston terminals
Wires
All wires
Note:
–
–
–
–
–
Polycarbonate (UL94V-0)
Polycarbonate (UL94V-0)
Gold (flash)/Silver (flash), Brass
6mm, 8mm = 24AWG, 10mm, 12mm = 22AWG
PVC (UL1061)
The company reserves the right to change specifications without notice.
www.apem.com
QS_13J
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Apem:
QS101XXHO28 QS123XXHG24 QS83XXHR02 QS103XXG02 QS63XXG02 QS123XXHG28