10250T Series pushbuttons
Point-of-purchase
packaged pilot
devices
10250T Series
point-of-purchase
packaged pilot devices
Clear-view packaging
commands attention!
Eaton’s 10250T Series pointof-purchase packaged pilot
devices are a convenient way
to buy complete devices that
serve multiple application
requirements. The see-through
packaging allows you to see
exactly what you are getting.
Eleven of our most popular
pushbutton products are
packaged in a rugged clear
clamshell, complete with all
the critical information you
need to make the right
selection. Catalog numbers
of other manufacturers’
products, as well as product
features, are listed on the
back of the package for
easy selection.
10250T Series point-of-purchase pilot device specifications
Catalog Number
Product
Description
10250T5B62-1-POP
Red non-illuminated push-pull
maintained, 40 mm diameter
Includes 1NO/1NC contact block and two square
engraved legend plates: “EMERG. STOP” and “STOP”
10250T32R-POP
Red mushroom head pushbutton
momentary, 40 mm diameter
Includes 1NO/1NC contact block and two square
engraved legend plates: “EMERG. STOP” and “STOP”
10250T33-POP
Red jumbo mushroom head
pushbutton momentary,
65 mm diameter
Includes 1NO/1NC contact block and button
is engraved “EMERG. STOP”
10250T30B-POP
Black flush pushbutton
Includes 1NO/1NC contact block and two square
engraved legend plates: “START” and “JOG”
10250T31R-POP
Red extended pushbutton
Includes 1NO/1NC contact block and one square
engraved legend plate: “STOP”
10250T206NC1N-POP
Red indicating light
Full voltage 24 Vac/Vdc. Includes green and amber lenses
and two square engraved legend plates: “RUN” and “JOG”
10250T34R-POP
Red indicating light
Resistor 120 Vac/Vdc. Includes green and amber lenses
and two square engraved legend plates: “RUN” and “JOG”
10250T476C21-1-POP
Red illuminated pushbutton
Full voltage 24 Vac/Vdc with 1NO/1NC contact block.
Also includes green and amber lenses and one square
engraved legend plate: “POWER ON”
10250T411C21-1-POP
Red illuminated pushbutton
Resistor 120 Vac/Vdc with 1NO/1NC contact block.
Also includes green and amber lenses and one square
engraved legend plate: “POWER ON”
10250T20KB-POP
Black knob two-position
selector switch
Includes 1NO/1NC contact block and three square engraved
legend plates: “OFF ON,” “HAND AUTO” and “RUN JOG”
10250T22KB-POP
Black knob three-position
selector switch
Includes 1NO/1NC contact block and one square engraved
legend plate: “HAND OFF AUTO”
Emergency Stop Operators
Momentary Pushbuttons
Indicating Lights
Illuminated Pushbuttons
Package Dimensions
6" W x 7" H
Selector Switches
Eaton Corporation
Electrical Sector
1111 Superior Ave.
Cleveland, OH 44114
United States
877-ETN-CARE (877-386-2273)
Eaton.com
© 2009 Eaton Corporation
All Rights Reserved
Printed in USA
Publication No. SA04709001E / Z9224
November 2009
PowerChain Management is a registered
trademark of Eaton Corporation.
All other trademarks are property of their
respective owners.