MECHANICAL Baby Car Seat Testing 0513\ME\CRS

advertisement
MECHANICAL
Baby Car Seat Testing
1
11
0513\ME\CRS\14
23/10/2014
Child Restraint System
Mod. BUBBLEBUM
Approval number E24 44R04-0040
Serial number / Batch number 414/1000/0114/PVG/SBIG
COP TEST
BUBBLEBUM (UK) Ltd
31, ROSSWATER
BT476YR DERRY (EE)
Regulation 44/04
(E/ECE/324/Rev.1/Add.43/Rev.3-E/ECE/TRANS/505/Rev.1/Add.43/Rev.3,Corr.1)
BUBBLEBUM (UK) Ltd
MECHANICAL Division
2
11
0513\ME\CRS\14
23/10/2014
GENERAL DATA
− Samples arrival date:
10/10/2014
− Test date:
from 10/10/2014 to 10/10/2014
− Identification of reference standard:
Regulation 44/04
(E/ECE/324/Rev.1/Add.43/Rev.3-E/ECE/TRANS/505/
Rev.1/Add.43/Rev.3,Corr.1)
− Standardised Procedure:
Yes
− Deviation from Test methods:
No
− Calculation and data transfer check:
Yes
− Sampling:
By the Customer
DECLARATION
-
Test results included in this test report refer exclusively to the tested samples.
-
This test report cannot be partially copied without Managing Director’s consent.
-
Uncertainty of Measurements: the different results are affected by the following declared
uncertainties, having a coverage probability of 95% with a covering factor K=2
Acceleration: ± 1.0 g
Speed: ± 0.8 km/h
Forces: ± 2N
Linear dimensions (mechanical): ± 5 mm
Linear dimensions (overturning): ± 9 mm
Linear dimensions (video): ± 20 mm (horizontal displacement)
± 19 mm (vertical displacement)
± 21 mm (stopping distance)
3
11
0513\ME\CRS\14
COP TESTS
Type:
BUBBLEBUM
(Gr.2/3)
Approval number:
E24 44R04-0040
Serial number/batch number:
414/1000/0114/PVG/SBIG
Colour:
Black
COP identification label collected in Annex 1.
RESULTS
MARKING AND INSTRUCTIONS
(par. 4, par. 6.4.1, par. 6.5.1)
Pass
4. Markings
6.4.1 Markings
6.5.1 Instructions
Fail
Not Appl.
23/10/2014
4
11
0513\ME\CRS\14
23/10/2014
DYNAMIC TEST
(par. 7.1.4)
Test N°
Test Set up
Dummy
Mass group tested
Impact direction
CRS Installation
CRS Position
Test results
Impact speed [49 ± 1 Km/h]
Impact speed [30 -0/+2 Km/h]
Stopping distance [650 ± 50 mm]
Stopping distance [275 ± 25 mm]
Peak Chest deceleration [< 55 g]
Chest resultant time over 55 g [< 3msec]
Peak Vertical negative chest deceleration
[>-30 g]
Peak Vertical negative chest deceleration
below -30 g [< 3 msec]
Abdominal penetration
The head of manikin passes the planes AB, AD and DE
Maximum horizontal displacement [< 550 mm]
Time at maximum horizontal displacement [msec]
Maximum vertical displacement [< 800 mm]
Time at maximum vertical displacement [msec]
Breakages
Adult safety belts disengagement
Buckle release force [< 80 N]
Graphs
Remarks
All graphs and pictures in Annex 2.
N.A means NOT APPLICABLE
1
P3
2
Frontal
Forward facing
Unique
49.30
N.A.
654
N.A.
42.40
0.0
-14.60
0.0
NO
N.A.
379
128
596
47
NO
NO
N.A.
Annex 2
Serial number/batch number:
414/1000/0114/PVG/SBIG.
Test with INFLATED child car
seat.
Test with RED SAFETY BELT
GUIDE.
5
11
0513\ME\CRS\14
“BUBBLEBUM” (Gr.2/3) detail
23/10/2014
6
11
0513\ME\CRS\14
“BUBBLEBUM” (Gr.2/3) detail
23/10/2014
7
11
0513\ME\CRS\14
Annex 1
COP Identification label
23/10/2014
8
11
0513\ME\CRS\14
APPROVAL label detail
23/10/2014
9
11
0513\ME\CRS\14
Annex 2
Test Graph
23/10/2014
10
11
0513\ME\CRS\14
Maximum horizontal displacement
23/10/2014
11
11
0513\ME\CRS\14
23/10/2014
Maximum vertical displacement
DATA
Date
RESP. MECCANICA
Division Head
RESP. DEL CENTRO
Managing Director
23/10/2014
Fausto Mozzarelli
Raoul Gatti
Motivo: Certificazione documento
Luogo: Viale Lombardia, 20 - 20021 Bollate
Data: 2014.10.23 14:12:28 +02'00'
Download