18.8 Stainless Steel - Boulons JM Bergeron
advertisement
* NEW Page 316 Stainless Steel Page Acorn Nuts NA18 Blind Rivets NA52 Cap Screws Flat Socket Head - UNC NA12 Cap Screws Hex Head - UNC NA1-3 Cap Screws Hex Head - UNF NA4 Cap Screws Hex Head full thread - UNC NA13 Cap Screws Hex Head - Metric NF1-2 Cap Screws Socket Head - Metric NF5 Carriage Bolts NA5 Clevis Pins NA52 Cotter Pins NA22 Countersunk Finishing Washers NA19 Coupling Nuts NA18 Eye Bolts with Nuts NA54 Fender Washers NA19 Finished Hex Jam Nuts - UNC NA15 Finished Hex Jam Nuts - UNF NA15 Finished Hex Nuts - UNC NA14 Finished Hex Nuts - UNF NA14 Finished Hex Nuts - Metric NF3 Flats NA24 Flat Head Phillips Machine Screws NA33-34 Flat Head Phillips Tapping Screws NA46 Flat Head Slot Machine Screws NA25-26 Flat Head Socket Tapping Screws NA42 Flat Head Square Socket Deck Screws NA39 Flat Washers NA19 Flat Washers - Metric NF4 Heavy Semi-Finished Hex Nuts - UNC NA17 Hex Machine Screw Nuts NA17 Hex Slot Washer Head Tapping Screws NA49 ‘Keps’ Nuts NA16 Lag Bolts NA6 Lag Screw Eyes NA53 Medium Lock Washers NA20 Medium Lock Washers - Metric NF4 Nylon Insert Stop Nuts - UNC NA16 Nylon Insert Stop Nuts - UNF NA16 Nylon Insert Stop Nuts - Metric NF3 Oval Head Phillips Machine Screws NA35 Oval Head Phillips Tapping Screws NA47 Oval Head Slot Machine Screws NA29 Oval Head Slot Tapping Screws NA40 Oval Head Socket Tapping Screws NA45 Pan Head Phillips Machine Screws NA36-37 Pan Head Phillips Tapping Screws NA48 Pan Head Slot Machine Screws NA30 Pan Head Slot Tapping Screws NA41 Pan Head Socket Tapping Screws NA43 Round Head Slot Machine Screws NA27-28 Round Rods NA24 Round Socket Machine Screws NA32 Hooks NA53 * SScrew Bolts with 2 Hex Nuts NA55 * Screw Eyes NA53 * Screw Hooks NA55 * Sleeve Anchors NA56 * Socket Head Cap Screws - UNC NA7-8 Socket Head Cap Screws - UNF NA9 Socket Set Screws - UNC NA10 Socket Set Screws - UNF NA11 Threaded Rods 3 Foot - UNC NA23 Threaded Rods 3 Foot - UNF NA23 Threaded Rods 6 Foot NA23 Threaded Rods - Metric NF4 Tooth Lock Washers - External NA20 Tooth Lock Washers - Internal NA20 Truss Head Phillips Machine Screws NA38 Truss Head Phillips Tapping Screws NA49 Truss Head Slot Machine Screws NA31 Truss Head Socket Tapping Screws NA44 Turnbuckles Eye and Eye NA55 Turnbuckles Hook and Eye NA55 Bolts with Plate & Nuts NA54 * UWedge Anchors NA56 * Wing Nuts NA18 Screws Hex Head - UNC * Cap Carriage Bolts NB1-3 NB4 NB5 NB7 NB6 NB7 NB6 NB6 18.8 Stainless Steel Head Office 55 Milne Avenue Toronto, Ontario M1L 4N3 Phone: (416) 694-3351 Fax: (416) 694-1869 Toll Free:1 800 268-4000 www.hpaulin.com DISTRIBUTION CENTRES CANADA 159 Henri Dunant St. Moncton, New Brunswick E1E 1E4 Phone: (506) 857-8658 Fax: (506) 857-9338 Toll Free: 1 800 561-7916 3179 Thunderbird Crescent Burnaby, British Columbia V5A 3G1 Phone: (604) 421-3096 Fax: (604) 421-3046 Toll Free: 1 800 667-7978 2591 Debray Street Laval, Quebec H7S 2J4 Phone: (450) 688-4292 Fax: (450) 688-4750 Toll Free: 1 800 361-2327 11714 - 180 Street Edmonton, Alberta T5S 1N7 Phone: (780) 450-1346 Fax: (780) 463-3597 Toll Free: 1 800 262-9026 1832 King Edward Street Winnipeg, Manitoba R2R 0N1 Phone: (204) 694-3802 Fax: (204) 694-3804 Toll Free: 1 800 665-7464 DISTRIBUTION CENTRES U.S.A. Paulin Industries Inc. 12400 Plaza Drive Parma, Ohio 44130-1057 Phone: (216) 433-7633 Fax: (216) 433-7622 Toll Free: 1 800 935-3688 Finished Hex Nuts - UNC Flat Washers Heavy Semi-Finished Hex Nuts - UNC Medium Lock Washers Nylon Insert Stop Nuts Threaded Rods 6 Foot 410 Stainless Steel NEW! Hex Head Drill X Screws * Indented Phillips Drill X Screws * Pan * Pan Socket Head Drill X Screws 420 Stainless Steel Spring Pins NA50 NA51 NA50 NA21 430 Stainless Steel * Pan Head Socket Tapping Screws Aluminum NA51 Angles Flats Head Slot Screws * Flat Flat Washers Slot Head Tapping Screws * Hex Head Slot Screws * Oval Pan Head Phillips Tapping Screws Head Slot Screws * Round Round Rods Round Tubing Square Tubing Track Sets NE4 NE3 NE1 NE1 NE2 NE2 NE2 NE1 NE4 NE3 NE3 NE4 Brass Acorn Nuts ND5 Cap Screws Hex Head full thread - UNC ND1 Cotter Pins ND8 Countersunk Finishing Washers ND7 Countersunk Finishing Washers Nickel Plated ND7 Countersunk Finishing Washers Flush Type ND7 Finished Hex Jam Nuts - UNC ND3 Finished Hex Jam Nuts - UNF ND3 Finished Hex Nuts - UNC ND2 Finished Hex Nuts - UNF ND2 Flat Head Slot Machine Screws ND10-11 Flat Head Slot Wood Screws ND14 Flat Head Square Socket Wood Screws ND16 Flat Washers ND6 Heavy Semi-Finished Hex Jam Nuts - UNC ND4 Heavy Semi-Finished Hex Nuts - UNC ND4 Hex Machine Screw Nuts ND5 Knurled Nuts ND5 Round Head Slot Machine Screws ND12-13 Round Head Slot Wood Screws ND15 Round Square Socket Wood Screws ND17 Threaded Rods 3 Foot ND9 Wing Nuts ND6 Nylon Acorn Nuts Countersunk Finishing Washers Flat Head Slot Machine Screws Flat Washers Hex Machine Screw Nuts Knurled Thumb Screws Binding Head Slot Machine Screws * Pan * Wing Nuts NG1 NG2 NG3 NG1 NG1 NG3 NG2 NG1 Silicon Bronze Cap Screws Hex Head full thread - UNC Finished Hex Nuts - UNC Flat Washers Medium Lock Washers Tooth Lock Washers - External Tooth Lock Washers - Internal NC1 NC2 NC2 NC3 NC3 NC3 ITEMS ARE AVAILABLE IN CARBON STEEL, REFER TO INDUSTRIAL CATALOGUES FOR MORE INFO H. Paulin & Co. Limited Simply click on index items to go to its page CORROSION RESISTANT FASTENERS PRODUCT ALLOY INDEX SECTION N SECTION N CAP SCREWS HEX HEAD - UNC CAP SCREWS HEX HEAD - UNF CARRIAGE BOLTS LAG BOLTS SOCKET HEAD CAP SCREWS - UNC Series # Page No. Series # Page No. Series # Page No. Series # Page No. Series # Page No. 18-8 Stainless 316 Stainless Silicon Bronze Brass 5000 5200 NA1 - 3 NB1 - 3 5600 ND1 SOCKET HEAD CAP SCREWS - UNF 5001 NA4 SOCKET SET SCREWS - UNC 5002 5202 NA5 NB4 SOCKET SET SCREWS - UNF 5003 NA6 CAP SCREWS FLAT SOCKET HEAD - UNC 5006 NA7- 8 CAPS SCREWS HEX HEAD full thrd. - UNC Series # Page No. Series # Page No. Series # Page No. Series # Page No. Series # Page No. 18-8 Stainless 316 Stainless Silicon Bronze Brass 5007 NA9 FINISHED HEX NUTS - UNC 5008 NA10 FINISHED HEX NUTS - UNF 5009 NA11 5010 NA12 5011 NA13 5400 NC1 FINISHED HEX JAM FINISHED HEX JAM NYLON INSERT STOP NUTS - UNC NUTS - UNC NUTS - UNF Series # Page No. Series # Page No. Series # Page No. Series # Page No. Series # Page No. 18-8 Stainless 316 Stainless Silicon Bronze Brass 5026 5226 5426 5626 NA14 NB5 NC2 ND2 NYLON INSERT STOP NUTS - UNF 5027 NA14 5028 NA15 5029 NA15 5627 ND2 5628 ND3 5629 ND3 ‘KEPS’ NUTS HEX MACHINE SCREW NUTS 5034 5232 NA16 NB6 HEAVY SEMI-FIN. HEAVY SEMI-FIN. HEX JAM NUTS - UNC HEX NUTS - UNC Series # Page No. Series # Page No. Series # Page No. Series # Page No. Series # Page No. 18-8 Stainless 316 Stainless Brass Nylon 5034 NA16 ACORN NUTS 5039 NA16 WING NUTS 5035 NA17 5035 5230 NA17 NB6 5636 5700 ND5 NG1 5630 ND4 COUPLING NUTS FLAT WASHERS 5632 ND4 COUNTERSUNK FINISHING WASHERS Series # Page No. Series # Page No. Series # Page No. Series # Page No. Series # Page No. 18-8 Stainless 316 Stainless Silicon Bronze Brass Nylon Aluminum 5037 NA18 5038 NA18 5638 ND5 5639 ND6 5702 NG1 5701 NG1 5038 NA18 5055 5255 5455 5655 5705 5855 NA19 NB7 NC2 ND6 NG2 NE1 5056 NA19 5656 5706 ND7 NG2 FINISHING WASHERS COUNTERSUNK TOOTH LOCK TOOTH LOCK COUNTERSUNK FINISHING WASHERS FENDER WASHERS WASHERS - EXTER. WASHERS - INTER. FLUSH TYPE NICKEL PLATED Series # Page No. Series # Page No. Series # Page No. Series # Page No. Series # Page No. 18-8 Stainless 316 Stainless Silicon Bronze Brass Nylon 5057 5656 ND7 5656 NA19 5061 NA20 5062 NA20 5461 NC3 5462 NC3 ND7 H. Paulin & Co. Limited CORROSION RESISTANT FASTENERS PRODUCT ALLOY INDEX (cont.) SECTION N SECTION N 18-8 Stainless 316 Stainless Silicon Bronze Brass Nylon 18-8 Stainless 316 Stainless Silicon Bronze Brass Nylon 18-8 Stainless 316 Stainless Silicon Bronze Brass 18-8 Stainless 430 Stainless Silicon Bronze Brass 18-8 Stainless 316 Stainless Silicon Bronze A luminum 18-8 Stainless 410 Stainless Silicon Bronze Brass A luminum THREADED RODS THREADED RODS THREADED RODS FLAT HEAD SLOT MEDIUM LOCK 3 FOOT - UNF MACHINE SCREWS 3 FOOT 6 FOOT WASHERS Series # Page No. Series # Page No. Series # Page No. Series # Page No. Series # Page No. 5091 NA23 5091 NA23 5091 NA23 5102 NA25 - 26 5058 NA20 5291 NB6 5258 NB7 5458 NC3 5702 ND10 - 11 5691 ND9 5716 NG3 PAN HEAD SLOT PAN BINDING HD. SLOT TRUSS HEAD SLOT ROUND HEAD SLOT OVAL HEAD SLOT MACHINE SCREWS MACHINE SCREWS MACHINE SCREWS MACHINE SCREWS MACHINE SCREWS Series # Page No. Series # Page No. Series # Page No. Series # Page No. Series # Page No. 5103 NA27 - 28 5105 NA30 5107 NA31 5104 NA29 5703 ND12 - 13 5715 NG2 FLAT HEAD PHILL. OVAL HEAD PHILL. PAN HEAD PHILL. TRUSS HEAD PHILL. ROUND SOCKET MACHINE SCREWS MACHINE SCREWS MACHINE SCREWS MACHINE SCREWS MACHINE SCREWS Series # Page No. Series # Page No. Series # Page No. Series # Page No. Series # Page No. 5113 NA35 5114 NA36 -37 5115 NA38 5111 NA33 - 34 5109 NA32 FLAT HEAD SOCKET OVAL HEAD SLOT PAN HEAD SLOT FLAT HEAD SOCKET PAN HEAD SOCKET TAPPING SCREWS TAPPING SCREWS TAPPING SCREWS TAPPING SCREWS DECK SCREWS Series # Page No. Series # Page No. Series # Page No. Series # Page No. Series # Page No. 5140 NA39 5157 NA40 5158 NA41 5162 NA42 5163 NA43 NA51 5363 TRUSS HD. SOCKET OVAL HD. SOCKET FLAT HEAD PHILL. OVAL HEAD PHILL. PAN HEAD PHILL. TAPPING SCREWS TAPPING SCREWS TAPPING SCREWS TAPPING SCREWS TAPPING SCREWS Series # Page No. Series # Page No. Series # Page No. Series # Page No. Series # Page No. 5165 NA45 5164 NA44 5168 NA46 5170 NA47 5171 NA48 5871 NE2 FLAT HEAD SLOT ROUND HEAD SLOT FLAT HEAD SQR. TRUSS HEAD PHILL. HEX SLOT WASH.HD WOOD SCREWS TAPPING SCREWS TAPPING SCREWS SOCKET WOOD SCREWS WOOD SCREWS Series # Page No. Series # Page No. Series # Page No. Series # Page No. Series # Page No. 5175 NA49 5172 NA49 203 ND16 189 H. Paulin & Co. Limited ND14 190 ND15 CORROSION RESISTANT FASTENERS PRODUCT ALLOY INDEX (cont.) SECTION N SECTION N NEW! NEW! PAN SOCKET HEAD DRILL X SCREWS PAN PHILLIPS DRILL X SCREWS NEW! INDENTED HEX HEAD DRILL X SCREWS ROUND SQR. SOCKET WOOD SCREWS SPRING PINS Series # Page No. Series # Page No. Series # Page No. Series # Page No. Series # Page No. 18-8 Stainless 420 Stainless Silicon Bronze Brass 410 Stainless 5079 204 5177 NA50 5176 NA50 5365 NA21 ND17 NA51 NEW! COTTER PINS KNURLED THUMB SCREWS CAP SCREWS HEX HEAD - METRIC FINISHED HEX NUTS - METRIC NYLON INSERT STOP NUTS - METRIC Series # Page No. Series # Page No. Series # Page No. Series # Page No. Series # Page No. 18-8 Stainless 316 Stainless Brass Nylon 5080 NA22 5680 ND8 5900 5717 FLAT WASHERS METRIC NF1 - 2 5901 NF3 5904 NF3 NG3 MEDIUM LOCK WASHERS - METRIC THREADED RODS METRIC - 1 METRE CAP SCREWS SOCKET HEAD - METRIC BLIND RIVETS Series # Page No. Series # Page No. Series # Page No. Series # Page No. Series # Page No. 18-8 Stainless 316 Stainless Silicon Bronze Brass Aluminum 5908 NF4 5909 NF4 5912 NEW! CLEVIS PINS NF4 5914 NEW! TURNBUCKLES HOOK SCREW BOLTS WITH AND EYE 2 HEX NUTS NF5 5195 NA52 NEW! SCREW HOOKS SQUARE TUBING Series # Page No. Series # Page No. Series # Page No. Series # Page No. Series # Page No. 18-8 Stainless 316 Stainless Silicon Bronze Aluminum 410 Stainless 5181 NA52 5198 NA55 5198 NA55 5198 NA55 142 FLATS TRACK SETS ANGLES ROUND RODS NE3 ROUND TUBING Series # Page No. Series # Page No. Series # Page No. Series # Page No. Series # Page No. 18-8 Stainless 316 Stainless Aluminum 410 Stainless 5091 NA24 142 NE3 142 NE4 142 NE4 5091 NA24 142 NE4 H. Paulin & Co. Limited 142 NE3 CORROSION RESISTANT FASTENERS PRODUCT ALLOY INDEX (cont.) SECTION N SECTION N NEW! SLEEVE ANCHORS NEW! WEDGE ANCHORS NEW! NEW! FLAT HEAD SLOT SCREWS ROUND HEAD SCREWS OVAL HEAD SLOT SCREWS Series # Page No. Series # Page No. Series # Page No. Series # Page No. Series # Page No. 18-8 Stainless 410 Stainless Silicon Bronze Brass Aluminum 5198 NA56 5198 NA56 5868 NEW! HEX SLOT HEAD TAPPING SCREWS NE1 NEW! KNURLED NUTS 5869 NEW! S HOOKS NE1 5870 NEW! SCREW EYES NE2 NEW! LAG SCREW EYES Series # Page No. Series # Page No. Series # Page No. Series # Page No. Series # Page No. 18-8 Stainless 316 Stainless Aluminum Brass 5198 5875 NA53 5198 NE2 5638 ND5 NEW! NEW! NEW! EYE BOLTS WITH NUTS U BOLTS WITH PLATE AND NUTS TURNBUCKLES EYE AND EYE Series # Page No. Series # Page No. 18-8 Stainless 420 Stainless Silicon Bronze Brass Aluminum 5198 NA54 5198 NA54 5198 NA55 H. Paulin & Co. Limited NA53 5198 NA53 18.8 Stainless Steel HEX HEAD CAP SCREWS UNC - Unified National Coarse Thread Series 5000 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO 1/4" Diameter - 303 - 305 - 306 - 307 - 308 - 309 - 311 - 313 - 315 - 316 - 317 - 318 - 319 - 320 - 321 - 322 - 324 - 325 - 326 - 327 - 329 1/4-20 x 3/8 1/4-20 x 1/2 1/4-20 x 5/8 1/4-20 x 3/4 1/4-20 x 7/8 1/4-20 x 1 1/4-20 x 1-1/4 1/4-20 x 1-1/2 1/4-20 x 1-3/4 1/4-20 x 2 1/4-20 x 2-1/4 1/4-20 x 2-1/2 1/4-20 x 2-3/4 1/4-20 x 3 1/4-20 x 3-1/4 1/4-20 x 3-1/2 1/4-20 x 4 1/4-20 x 4-1/2 1/4-20 x 5 1/4-20 x 5-1/2 1/4-20 x 6 5/16-18 x 1/2 5/16-18 x 5/8 5/16-18 x 3/4 5/16-18 x 7/8 5/16-18 x 1 5/16-18 x 1-1/4 5/16-18 x 1-1/2 5/16-18 x 1-3/4 5/16-18 x 2 5/16-18 x 2-1/4 5/16-18 x 2-1/2 100 100 100 100 100 100 100 100 100 100 50 50 50 25 25 25 25 10 10 10 10 2000 3000 2000 2000 2000 2000 1600 1600 1200 1200 800 600 600 400 400 400 400 160 80 80 80 100 100 100 100 100 100 100 100 100 50 50 2000 2000 1600 1600 1600 1200 1200 800 800 400 400 - 454 - 455 - 456 - 457 - 459 - 460 - 461 - 462 - 464 5/16-18 x 2-3/4 5/16-18 x 3 5/16-18 x 3-1/4 5/16-18 x 3-1/2 5/16-18 x 4 5/16-18 x 4-1/2 5/16-18 x 5 5/16-18 x 5-1/2 5/16-18 x 6 - 485 - 486 - 487 - 488 - 489 - 491 - 493 - 495 - 496 - 497 - 498 - 499 - 500 - 501 -502 -503 -504 -505 -506 -507 -509 -510 -511 -513 3/8-16 x 1/2 3/8-16 x 5/8 3/8-16 x 3/4 3/8-16 x 7/8 3/8-16 x 1 3/8-16 x 1-1/4 3/8-16 x 1-1/2 3/8-16 x 1-3/4 3/8-16 x 2 3/8-16 x 2-1/4 3/8-16 x 2-1/2 3/8-16 x 2-3/4 3/8-16 x 3 3/8-16 x 3-1/4 3/8X3 1/2 3/8X3 3/4 3/8X4 3/8X4 1/2 3/8X5 3/8X5 1/2 3/8X6 3/8X6 1/2 3/8X7 3/8X8 50 25 25 25 25 10 10 10 10 400 400 400 400 400 80 80 80 80 100 100 100 100 100 100 100 100 100 50 50 25 25 25 25 25 25 10 10 10 10 Bulk: Bulk: Bulk: 1600 1600 1200 1200 1200 800 800 600 600 400 400 400 200 200 200 200 200 80 80 80 80 240 240 200 3/8" Diameter Note: Please use Series and Size No. when ordering: Example: 1/4 -20 x 1 UNC 18.8 Stainless Steel Hex Head Cap Screw Series - Size. 5000 - 309 PKG QTY LIST PRICE PER 100 PCS DIAMETER x LENGTHSIZE NOPKG QTY LIST PRICE PKG KG KG CPASE QTY TY QQ TYTY 5/16" Diameter 5/16" Diameter - 440 - 441 - 442 - 443 - 444 - 446 - 448 - 450 - 451 - 452 - 453 DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA1 18.8 Stainless Steel HEX HEAD CAP SCREWS UNC - Unified National Coarse Thread Series 5000 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO 3/8" Diameter -515 -517 3/8X9 3/8X10 7/16-14X3/4 7/16-14X1 7/16-14X1 1/4 7/16-14X1 1/2 7/16-14X1 3/4 7/16-14X2 7/16-14X2 1/4 7/16-14X2 1/2 7/16-14X2 3/4 7/16-14X3 7/16-14X3 1/2 7/16-14X4 7/16-14X4 1/2 7/16-14X5 -577 -578 -579 -581 -583 -585 -586 -587 -588 -589 -590 -591 -592 -593 -594 1/2-13X3/4 1/2-13X7/8 1/2-13X1 1/2-13X1 1/4 1/2-13X1 1/2 1/2-13X1 3/4 1/2-13X2 1/2-13X2 1/4 1/2-13X2 1/2 1/2-13X2 3/4 1/2-13X3 1/2-13X3 1/4 1/2-13X3 1/2 1/2-13X3 3/4 1/2-13X4 180 180 25 25 25 25 25 20 20 20 10 10 10 10 10 10 800 800 600 600 400 400 400 300 300 200 200 200 200 200 1/2" Diameter 25 25 25 25 25 25 20 20 20 20 10 10 10 10 10 500 300 500 400 200 200 240 240 240 160 160 80 80 80 80 -595 -596 -597 -599 -600 -601 -602 -603 -604 -605 -607 January, 2009 1/2-13X4 1/2 1/2-13X5 1/2-13X5 1/2 1/2-13X6 1/2-13X6 1/2 1/2-13X7 1/2-13X7 1/2 1/2-13X8 1/2-13X8 1/2 1/2-13X9 1/2-13X10 10 10 10 10 10 10 10 10 Bulk: Bulk: Bulk: 80 80 80 80 40 40 40 40 120 120 120 25 25 25 20 20 20 20 20 10 10 10 10 10 10 10 10 10 Bulk: Bulk: Bulk: Bulk: 300 300 200 160 120 160 160 120 80 80 80 80 80 80 80 80 80 70 70 60 75 5/8" Diameter - 668 - 670 - 672 - 674 - 675 - 676 - 677 - 678 - 679 - 680 - 681 - 682 - 683 - 684 - 685 - 686 - 688 - 689 - 690 - 692 - 696 Note: Please use Series and Size No. when ordering: Example: 7/16-14 x 2 18.8 Stainless Steel Hex Head Cap Screws Series Size No. 5000 -541 NA2 PKG KG KG CPASE QTY TY QQ TYTY 1/2" Diameter Bulk: Bulk: 7/16" Diameter -532 -534 -536 -538 -540 -541 -542 -543 -544 -545 -547 -549 -550 -551 D DIAMETER IAMETER DIAMETER PKG xx L LENGTH ENGTH ENGTH x LENGTH QTY 5/8-11X1 5/8-11X1 1/4 5/8-11X1 1/2 5/8-11X1 3/4 5/8-11X2 5/8-11X2 1/4 5/8-11X2 1/2 5/8-11X2 3/4 5/8-11X3 5/8-11X3 1/4 5/8-11X3 1/2 5/8-11X3 3/4 5/8-11X4 5/8-11X4 1/2 5/8-11X5 5/8-11X5 1/2 5/8-11X6 5/8-11X6 1/2 5/8-11X7 5/8-11X8 5/8-11X10 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel HEX HEAD CAP SCREWS UNC - Unified National Coarse Thread Series 5000 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSS IZE SS IZE IZE IZE IZE IZE NN ON O O N N OO O 3/4" Diameter - 712 - 714 - 716 - 717 - 718 - 719 - 720 - 721 - 722 - 723 - 724 - 725 - 726 - 727 - 728 - 730 - 731 - 732 - 734 - 738 3/4-10X1 1/4 3/4-10X1 1/2 3/4-10X1 3/4 3/4-10X2 3/4-10X2 1/4 3/4-10X2 1/2 3/4-10X2 3/4 3/4-10X3 3/4-10X3 1/4 3/4-10X3 1/2 3/4-10X3 3/4 3/4-10X4 3/4-10X4 1/2 3/4-10X5 3/4-10X5 1/2 3/4-10X6 3/4-10X6 1/2 3/4-10X7 3/4-10X8 3/4-10X10 - 759 - 761 - 762 - 763 - 764 - 765 - 766 - 768 - 770 - 771 - 772 - 773 7/8-9X1 1/2 7/8-9X1 3/4 7/8-9X2 7/8-9X2 1/4 7/8-9X2 1/2 7/8-9X2 3/4 7/8-9X3 7/8-9X3 1/2 7/8-9X4 7/8-9X4 1/2 7/8-9X5 7/8-9X5 1/2 D D IAMETER IAMETER D DIAMETER IAMETER DIAMETER IAMETER PKG xxxLLLENGTH ENGTH ENGTH xx LLENGTH ENGTH ENGTH QTY PPKG PASE KG C KG PKG KG Q Q QTY Q TY Q TYTY TY 7/8" Diameter 20 20 20 20 20 20 20 10 10 10 Bulk: 10 10 10 10 10 Bulk: Bulk: Bulk: Bulk: 120 120 120 120 120 120 120 80 80 60 90 60 60 60 60 40 60 60 60 50 10 10 10 10 10 10 10 10 10 10 10 10 60 60 60 60 60 60 60 60 60 60 60 40 7/8" Diameter - 775 - 776 - 777 - 779 - 783 7/8-9X6 7/8-9X6 1/2 7/8-9X7 7/8-9X8 7/8-9X10 - 803 - 804 - 805 - 806 - 807 - 808 - 809 - 810 - 811 - 812 - 813 - 814 - 816 - 817 - 818 - 820 - 821 - 822 - 824 1-8X2 1-8X2 1/4 1-8X2 1/2 1-8X2 3/4 1-8X3 1-8X3 1/4 1-8X3 1/2 1-8X3 3/4 1-8X4 1-8X4 1/2 1-8X5 1-8X5 1/2 1-8X6 1-8X6 1/2 1-8X7 1-8X8 1-8X8 1/2 1-8X9 1-8X10 10 Bulk: Bulk: Bulk: Bulk: 40 45 45 45 40 Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: 90 85 80 70 65 60 60 50 40 40 40 40 30 35 35 30 30 30 30 1" Diameter Note: Please use Series and Size No. when ordering: Example: 3/4-10 x 10 UNC 18.8 Stainless Steel Hex Head Cap Screws Series Size No. 5000 -738 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA3 18.8 Stainless Steel HEX HEAD CAP SCREWS UNF - Unified National Fine Thread Series 5001 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO 1/4" Diameter - 305 - 306 - 307 - 308 - 309 - 311 - 313 - 315 - 316 - 318 - 320 1/4-28X1/2 1/4-28X5/8 1/4-28X3/4 1/4-28X7/8 1/4-28X1 1/4-28X1 1/4 1/4-28X1 1/2 1/4-28X1 3/4 1/4-28X2 1/4-28X2 1/2 1/4-28X3 5/16-24X1/2 5/16-24X3/4 5/16-24X7/8 5/16-24X1 5/16-24X1 1/4 5/16-24X1 1/2 5/16-24X1 3/4 5/16-24X2 5/16-24X2 1/2 5/16-24X3 - 487 - 488 - 489 - 491 - 493 - 495 - 496 - 497 - 498 - 500 3/8-24X3/4 3/8-24X7/8 3/8-24X1 3/8-24X1 1/4 3/8-24X1 1/2 3/8-24X1 3/4 3/8-24X2 3/8-24X2 1/4 3/8-24X2 1/2 3/8-24X3 PKG KG KG CPASE QTY TY QQ TYTY 1/2" Diameter 100 100 100 100 100 100 100 100 100 50 25 3200 3200 2400 2400 1600 1600 1200 1200 1200 800 400 100 100 100 100 100 100 100 100 50 25 2400 1600 1600 1600 1200 800 800 800 600 300 100 100 100 100 100 100 100 50 50 25 1200 1200 1200 1200 600 600 600 400 400 200 5/16" Diameter - 440 - 442 - 443 - 444 - 446 - 448 - 450 - 451 - 453 - 455 D DIAMETER IAMETER DIAMETER PKG xx L LENGTH ENGTH ENGTH x LENGTH QTY - 579 - 581 - 583 - 585 - 586 - 588 - 590 1/2-20X1 1/2-20X1 1/4 1/2-20X1 1/2 1/2-20X1 3/4 1/2-20X2 1/2-20X2 1/2 1/2-20X3 - 672 - 674 - 675 - 677 - 679 5/8-18X1 1/2 5/8-18X1 3/4 5/8-18X2 5/8-18X2 1/2 5/8-18X3 25 25 25 25 20 50 10 400 400 400 240 240 240 240 25 20 20 20 10 200 200 150 150 80 5/8" Diameter 3/8" Diameter Note: Please use Series and Size No. when ordering: Example: 5/16-24 x 1/2 UNF 18.8 Stainless Steel Hex Head Cap Screws Series Size No. 5001 -440 NA4 January, 2009 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel CARRIAGE BOLTS UNC - Unified National Coarse Thread Fully Threaded Series 5002 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO 1/4-20X1/2 1/4-20X5/8 1/4-20X3/4 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2 1/4-20X1 3/4 1/4-20X2 1/4-20X2 1/2 1/4-20X3 1/4-20X3 1/2 1/4-20X4 1/4-20X4 1/2 1/4-20X5 1/4-20X6 - 442 - 444 - 446 - 448 - 450 - 451 - 452 - 453 - 455 - 457 - 459 - 460 - 461 - 464 5/16-18X3/4 5/16-18X1 5/16-18X1 1/4 5/16-18X1 1/2 5/16-18X1 3/4 5/16-18X2 5/16-18X2 1/4 5/16-18X2 1/2 5/16-18X3 5/16-18X3 1/2 5/16-18X4 5/16-18X4 1/2 5/16-18X5 5/16-18X6 PKG KG KG CPASE QTY TY QQ TYTY 3/8" Diameter 1/4" Diameter - 305 - 306 - 307 - 309 - 311 - 313 - 315 - 316 - 318 - 320 - 322 - 324 - 325 - 326 - 329 D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH ENGTH x LENGTH QTY 100 100 100 100 100 100 100 100 50 50 50 25 10 10 10 2000 3000 2000 2000 1600 1600 1200 1200 800 400 400 400 80 80 80 - 489 - 491 - 493 - 495 - 496 - 498 - 500 - 502 - 504 - 505 - 506 - 509 3/8-16X1 3/8-16X1 1/4 3/8-16X1 1/2 3/8-16X1 3/4 3/8-16X2 3/8-16X2 1/2 3/8-16X3 3/8-16X3 1/2 3/8-16X4 3/8-16X4 1/2 3/8-16X5 3/8-16X6 50 50 50 50 50 50 25 25 25 25 25 25 25 25 1000 1000 800 800 600 600 400 400 400 200 200 200 200 200 - 583 - 586 - 588 - 590 - 592 - 594 - 596 - 599 1/2-13X1 1/2 1/2-13X2 1/2-13X2 1/2 1/2-13X3 1/2-13X3 1/2 1/2-13X4 1/2-13X5 1/2-13X6 5/16" Diameter 50 50 50 50 25 25 25 25 10 10 10 10 800 800 600 400 400 400 200 200 80 80 80 80 25 25 20 10 10 10 10 10 200 150 160 80 80 80 80 80 1/2" Diameter Note: Please use Series and Size No. when ordering: Example: 5/16-18 x 3/4 UNC 18.8 Stainless Steel Carriage Bolts Series Size No. 5002 -442 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA5 18.8 Stainless Steel LAG BOLTS Series 5003 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO 1/4" Diameter - 309 - 311 - 313 - 316 - 318 - 320 - 322 - 324 - 326 1/4X1 1/4X1 1/4 1/4X1 1/2 1/4X2 1/4X2 1/2 1/4X3 1/4X3 1/2 1/4X4 1/4X5 - 444 - 448 - 451 - 453 - 455 - 457 - 459 - 461 - 464 5/16X1 5/16X1 1/2 5/16X2 5/16X2 1/2 5/16X3 5/16X3 1/2 5/16X4 5/16X5 5/16X6 50 50 50 50 25 25 20 20 20 1200 1200 1200 1200 500 500 320 320 160 - 493 - 495 - 496 - 498 - 500 - 502 - 504 - 506 - 509 3/8X1 1/2 3/8X1 3/4 3/8X2 3/8X2 1/2 3/8X3 3/8X3 1/2 3/8X4 3/8X5 3/8X6 50 50 50 25 25 25 20 20 20 1200 1200 800 400 400 400 320 160 160 - 586 - 588 - 590 - 594 - 596 - 599 1/2X2 1/2X2 1/2 1/2X3 1/2X4 1/2X5 1/2X6 50 50 50 25 25 20 20 20 20 400 300 600 200 400 160 160 160 160 50 25 25 20 20 20 300 150 200 160 160 160 1/2" Diameter Note: Please use Series and Size No. when ordering: Example: 1/4 x 1 18.8 Stainless Steel Lag Bolts Series Size No. 5003 -309 January, 2009 PKG KG KG CPASE QTY TY QQ TYTY 3/8" Diameter 5/16" Diameter NA6 DIAMETER IAMETER DIAMETER PKG D LENGTH ENGTH x LENGTH QTY xx L ENGTH Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel SOCKET HEAD CAP SCREWS UNC - Unified National Coarse Thread Series 5006 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO No. 4 Diameter - 039 - 040 - 041 - 043 - 044 - 045 - 046 - 047 4-40X1/4 4-40X5/16 4-40X3/8 4-40X1/2 4-40X5/8 4-40X3/4 4-40X7/8 4-40X1 6-32X1/4 6-32X5/16 6-32X3/8 6-32X1/2 6-32X5/8 6-32X3/4 6-32X7/8 6-32X1 6-32X1 1/4 6-32X1 1/2 - 133 - 134 - 135 - 137 - 138 - 139 - 140 - 141 - 143 - 145 8-32X1/4 8-32X5/16 8-32X3/8 8-32X1/2 8-32X5/8 8-32X3/4 8-32X7/8 8-32X1 8-32X1 1/4 8-32X1 1/2 PKG KG KG CPASE QTY TY QQ TYTY No. 10 Diameter 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 7500 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 7500 4500 4500 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 4500 4500 4500 3000 No. 6 Diameter - 083 - 084 - 085 - 087 - 088 - 089 - 090 - 091 - 093 - 095 D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH ENGTH x LENGTH QTY No. 8 Diameter - 187 - 189 - 190 - 191 - 192 - 193 - 195 - 197 - 199 - 200 10-24X3/8 10-24X1/2 10-24X5/8 10-24X3/4 10-24X7/8 10-24X1 10-24X1 1/4 10-24X1 1/2 10-24X1 3/4 10-24X2 - 303 - 305 - 306 - 307 - 308 - 309 - 311 - 313 - 315 - 316 - 317 - 318 - 320 1/4-20X3/8 1/4-20X1/2 1/4-20X5/8 1/4-20X3/4 1/4-20X7/8 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2 1/4-20X1 3/4 1/4-20X2 1/4-20X2 1/4 1/4-20X2 1/2 1/4-20X3 - 438 - 440 - 441 - 442 - 443 - 444 - 446 - 448 - 450 - 451 - 452 5/16-18X3/8 5/16-18X1/2 5/16-18X5/8 5/16-18X3/4 5/16-18X7/8 5/16-18X1 5/16-18X1 1/4 5/16-18X1 1/2 5/16-18X1 3/4 5/16-18X2 5/16-18X2 1/4 100 100 100 100 100 100 100 100 100 100 7500 4500 4500 4500 4500 3000 3000 2000 2000 1600 100 100 100 100 100 100 100 100 100 100 100 100 50 4500 4500 3000 2000 2000 2000 1600 1600 1600 1200 1200 1200 400 100 100 100 100 100 100 100 100 100 100 100 2000 2000 2000 1600 1600 1600 1200 1200 1200 800 800 1/4" Diameter 5/16" Diameter Note: Please use Series and Size No. when ordering: Example: 4-40 x 1/4 UNC 18.8 Stainless Steel Socket Head Cap Screws Series Size No. 5006 -039 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA7 18.8 Stainless Steel SOCKET HEAD CAP SCREWS UNC - Unified National Coarse Thread Series 5006 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO DIAMETER IAMETER DIAMETER PKG D IAMETER LENGTH ENGTH x LENGTH QTY xx L ENGTH 5/16" Diameter - 453 - 455 5/16-18X2 1/2 5/16-18X3 5/8" Diameter 100 50 600 400 100 100 100 100 100 100 100 50 50 50 50 50 50 50 1600 1600 1200 1200 1200 600 600 400 400 400 300 300 300 200 50 50 50 50 50 50 50 50 25 25 25 25 600 600 600 300 300 300 300 300 150 150 150 150 3/8" Diameter - 485 - 486 - 487 - 488 - 489 - 491 - 493 - 495 - 496 - 497 - 498 - 499 - 500 - 502 3/8-16X1/2 3/8-16X5/8 3/8-16X3/4 3/8-16X7/8 3/8-16X1 3/8-16X1 1/4 3/8-16X1 1/2 3/8-16X1 3/4 3/8-16X2 3/8-16X2 1/4 3/8-16X2 1/2 3/8-16X2 3/4 3/8-16X3 3/8-16X3 1/2 - 577 - 578 - 579 - 581 - 583 - 585 - 586 - 587 - 588 - 589 - 590 - 592 1/2-13X3/4 1/2-13X7/8 1/2-13X1 1/2-13X1 1/4 1/2-13X1 1/2 1/2-13X1 3/4 1/2-13X2 1/2-13X2 1/4 1/2-13X2 1/2 1/2-13X2 3/4 1/2-13X3 1/2-13X3 1/2 1/2" Diameter - 670 - 672 - 674 - 675 - 676 - 677 - 678 - 679 - 682 5/8-11X1 1/4 5/8-11X1 1/2 5/8-11X1 3/4 5/8-11X2 5/8-11X2 1/4 5/8-11X2 1/2 5/8-11X2 3/4 5/8-11X3 5/8-11X3 1/2 - 712 - 714 - 716 - 717 - 719 - 721 - 723 - 725 3/4-10X1 1/4 3/4-10X1 1/2 3/4-10X1 3/4 3/4-10X2 3/4-10X2 1/2 3/4-10X3 3/4-10X3 1/2 3/4-10X4 January, 2009 25 25 25 25 25 25 25 25 25 300 150 150 150 150 150 150 150 150 20 20 20 20 20 10 10 10 160 160 160 120 120 80 80 60 3/4" Diameter Note: Please use Series and Size No. when ordering: Example: 5/16-18 x 2 1/2 UNC 18.8 Stainless Steel Socket Head Cap Screws Series Size No. 5006 -453 NA8 PKG KG KG CPASE QTY QQ TYTY Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel SOCKET HEAD CAP SCREWS UNF - Unified National Fine Thread Series 5007 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO DIAMETER IAMETER DIAMETER PKG D IAMETER LENGTH ENGTH x LENGTH QTY xx L ENGTH No.10 Diameter - 215 - 217 - 218 - 219 - 220 - 221 - 223 - 225 - 227 - 228 10-32X3/8 10-32X1/2 10-32X5/8 10-32X3/4 10-32X7/8 10-32X1 10-32X1 1/4 10-32X1 1/2 10-32X1 3/4 10-32X2 - 348 - 350 - 351 - 352 - 354 - 356 1/4-28X3/8 1/4-28X1/2 1/4-28X5/8 1/4-28X3/4 1/4-28X1 1/4-28X1 1/4 PKG KG KG CPASE QTY TY QQ TYTY 5/16" Diameter 100 100 100 100 100 100 100 100 100 100 4500 4500 4500 4500 3000 3000 3000 2000 2000 1600 100 100 100 100 100 100 4500 3000 3000 2000 2000 2000 1/4" Diameter - 440 - 442 - 444 - 446 - 448 5/16-24X1/2 5/16-24X3/4 5/16X-24X1 5/16-24X1 1/4 5/16-24X1 1/2 - 485 - 487 - 489 - 491 - 493 3/8-24X1/2 3/8-24X3/4 3/8-24X1 3/8-24X1 1/4 3/8-24X1 1/2 100 100 100 100 100 2000 1600 1600 1200 1200 100 100 100 100 100 1600 1200 800 800 800 3/8" Diameter Note: Please use Series and Size No. when ordering: Example: 10-32 x 3/8 UNC 18.8 Stainless Steel Socket Head Cap Screws Series Size No. 5007 -215 Stock Sizes are shown in HEAVY type. Long-Lok Canada is your “one stop shop” for self-locking and / or self-sealing threaded fasteners. This division of H. Paulin & Co. Limited is a licensed applicator (processor) of 3M Scotch-Grip® and Henkel® / Loctite® brands of fastener adhesives and sealants. Long-Lok’s products are approved to various automotive and industrial O.E.M. specifications and meet the performance requirements of the Industrial Fastener Institute. Well known for their track record of providing excellent customer service, particularly in providing solutions for fastener loosening or sealing problems. *Minimum quantities may apply 5 Crockford Blvd. Toronto, ON M1L 4J9 Tel: 416-288-6855 Fax: 416-288-8761 ISO 9001:2000 Certified www.hpaulin.com H. Paulin & Co. Limited January, 2009 NA9 18.8 Stainless Steel SOCKET SET SCREWS UNC - Unified National Coarse Thread Series 5008 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO No.2 Diameter - 012 - 014 - 015 2-56X1/8 2-56X3/16 2-56X1/4 - 036 - 038 - 039 - 040 - 041 - 043 4-40X1/8 4-40X3/16 4-40X1/4 4-40X5/16 4-40X3/8 4-40X1/2 - 080 - 082 - 083 - 084 - 085 - 087 - 088 - 089 6-32X1/8 6-32X3/16 6-32X1/4 6-32X5/16 6-32X3/8 6-32X1/2 6-32X5/8 6-32X3/4 - 130 - 132 - 133 - 134 - 135 - 137 - 139 8-32X1/8 8-32X3/16 8-32X1/4 8-32X5/16 8-32X3/8 8-32X1/2 8-32X3/4 - 184 - 185 - 186 - 187 - 189 - 190 - 191 - 193 10-24X3/16 10-24X1/4 10-24X5/16 10-24X3/8 10-24X1/2 10-24X5/8 10-24X3/4 10-24X1 7500 7500 7500 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 - 300 - 301 - 302 - 303 - 305 - 306 - 307 - 309 - 311 - 313 1/4-20X3/16 1/4-20X1/4 1/4-20X5/16 1/4-20X3/8 1/4-20X1/2 1/4-20X5/8 1/4-20X3/4 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 7500 - 436 - 437 - 438 - 440 - 441 - 442 - 444 - 446 5/16-18X1/4 5/16-18X5/16 5/16-18X3/8 5/16-18X1/2 5/16-18X5/8 5/16-18X3/4 5/16-18X1 5/16-18X1 1/4 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 - 482 - 483 - 485 - 486 - 487 - 489 - 491 - 493 3/8-16X5/16 3/8-16X3/8 3/8-16X1/2 3/8-16X5/8 3/8-16X3/4 3/8-16X1 3/8-16X1 1/4 3/8-16X1 1/2 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 4500 - 575 - 576 - 577 - 579 - 581 - 583 1/2-13X1/2 1/2-13X5/8 1/2-13X3/4 1/2-13X1 1/2-13X1 1/4 1/2-13X1 1/2 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 4500 4500 4500 4500 4500 3000 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 3000 3000 2000 100 100 100 100 100 100 100 100 4500 4500 4500 3000 2000 2000 1600 1600 50 50 50 50 50 50 2250 1500 1500 1000 800 800 5/16" Diameter No.6 Diameter 3/8" Diameter No.8 Diameter No.10 Diameter 1/2" Diameter Note: Please use Series and Size No. when ordering: Example: 2-56 x 1/8 UNC 18.8 Stainless Steel Socket Set Screws Series Size No. 5008 -012 January, 2009 PKG KG KG CPASE QTY TY QQ TYTY 1/4" Diameter 100 100 100 No.4 Diameter NA10 DIAMETER IAMETER DIAMETER PKG D LENGTH ENGTH x LENGTH QTY xx L ENGTH Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel SOCKET SET SCREWS UNF - Unified National Fine Thread Series 5009 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON OO D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH x LENGTH QTY - 345 - 346 - 347 - 348 - 350 - 351 - 352 - 354 1/4-28X3/16 1/4-28X1/4 1/4-28X5/16 1/4-28X3/8 1/4-28X1/2 1/4-28X5/8 1/4-28X3/4 1/4-28X1 - 440 - 442 5/16-24X1/2 5/16-24X3/4 - 487 - 489 3/8-24X3/4 3/8-24X1 No.10 Diameter - 182 - 184 - 185 - 186 - 187 - 189 - 190 - 191 - 193 10-32X1/8 10-32X3/16 10-32X1/4 10-32X5/16 10-32X3/8 10-32X1/2 10-32X5/8 10-32X3/4 10-32X1 PKG KG KG CPASE QTY TY QQ TYTY 1/4" Diameter 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 7500 4500 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 4500 2000 2000 100 100 2000 1600 100 100 3000 1200 5/16" Diameter 3/8" Diameter Note: Please use Series and Size No. when ordering: Example: 10-32 x 1/8 UNC 18.8 Stainless Steel Socket Set Screws Series Size No. 5009 -182 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA11 18.8 Stainless Steel FLAT SOCKET HEAD CAP SCREWS UNC - Unified National Coarse Thread Series 5010 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO 4-40X1/4 4-40X3/8 4-40X1/2 100 100 100 7500 7500 7500 100 100 100 100 100 7500 7500 7500 7500 7500 100 100 100 100 100 7500 7500 7500 7500 7500 100 100 100 100 100 100 7500 7500 4500 4500 4500 3000 No.6 Diameter - 083 - 085 - 087 - 088 - 089 6-32X1/4 6-32X3/8 6-32X1/2 6-32X5/8 6-32X3/4 - 135 - 137 - 138 - 139 - 141 8-32X3/8 8-32X1/2 8-32X5/8 8-32X3/4 8-32X1 - 187 - 189 - 190 - 191 - 193 - 195 10-24X3/8 10-24X1/2 10-24X5/8 10-24X3/4 10-24X1 10-24X1 1/4 No.8 Diameter No.10 Diameter No.10 Diameter UNF - 215 - 217 - 218 - 219 - 221 - 223 10-32X3/8 10-32X1/2 10-32X5/8 10-32X3/4 10-32X1 10-32X1 1/4 - 305 - 306 - 307 - 309 - 311 - 313 1/4-20X1/2 1/4-20X5/8 1/4-20X3/4 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2 PKG KG CPASE QTY TY QQ TYTY 1/4" Diameter No.4 Diameter - 039 - 041 - 043 DIAMETER IAMETER DIAMETER PKG D LENGTH ENGTH x LENGTH QTY xx L ENGTH 100 100 100 100 100 100 7500 7500 4500 4500 4500 3000 100 100 100 100 100 100 4500 3000 3000 2000 2000 1600 - 316 1/4-20X2 100 1200 100 100 100 100 100 100 100 100 2000 2000 2000 1600 1600 1200 800 600 100 100 100 100 100 100 100 100 1600 1600 1600 1200 1200 600 600 600 50 50 50 50 50 50 800 800 600 600 400 400 5/16" Diameter - 440 - 441 - 442 - 444 - 446 - 448 - 450 - 451 5/16-18X1/2 5/16-18X5/8 5/16-18X3/4 5/16-18X1 5/16-18X1 1/4 5/16-18X1 1/2 5/16-18X1 3/4 5/16-18X2 - 485 - 486 - 487 - 489 - 491 - 493 - 495 - 496 3/8-16X1/2 3/8-16X5/8 3/8-16X3/4 3/8-16X1 3/8-16X1 1/4 3/8-16X1 1/2 3/8-16X1 3/4 3/8-16X2 - 577 - 579 - 581 - 583 - 585 - 586 1/2-13X3/4 1/2-13X1 1/2-13X1 1/4 1/2-13X1 1/2 1/2-13X1 3/4 1/2-13X2 3/8" Diameter 1/2" Diameter 1/4" Diameter Note: Please use Series and Size No. when ordering: Stock Sizes are shown in HEAVY type. Example: 1/4 -20 x 1 1/2 UNC 18.8 Stainless Steel Flat Socket Head Cap Screws Series Size No. 5010 -313 NA12 January, 2009 H. Paulin & Co. Limited 18.8 Stainless Steel HEX HEAD CAP SCREWS FULL THREAD UNC - Unified National Coarse Thread Series 5011 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO 1/4" Diameter - 311 - 313 - 315 - 316 - 318 - 320 1/4-20X1 1/4 1/4-20X1 1/2 1/4-20X1 3/4 1/4-20X2 1/4-20X2 1/2 1/4-20X3 - 448 - 450 - 451 - 453 - 455 5/16-18X1 1/2 5/16-18X1 3/4 5/16-18X2 5/16-18X2 1/2 5/16-18X3 DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH PKG KG KG CPASE QTY TY QQ TYTY 3/8" Diameter 100 100 100 100 50 25 1600 1600 600 800 400 400 - 493 - 495 - 496 - 498 - 500 - 502 - 504 3/8-16X1 1/2 3/8-16X1/3/4 3/8-16X2 3/8-16X2 1/2 3/8-16X3 3/8-16X3 1/2 3/8-16X4 100 100 100 50 25 800 600 800 400 400 - 585 - 586 - 588 - 590 - 592 1/2-13X1 3/4 1/2-13X2 1/2-13X2 1/2 1/2-13X3 1/2-13X3 1/2 5/16" Diameter 100 100 100 50 25 25 25 600 600 600 400 200 200 200 25 20 20 15 15 400 160 160 120 120 1/2" Diameter Note: Please use Series and Size No. when ordering: Stock Sizes are shown in HEAVY type. Example: 1/4 -20 x 1 1/4 UNC 18.8 Stainless Steel Hex Head Cap Screws Full Thread Series Size No. 5011 -311 H. Paulin & Co. Limited January, 2009 NA13 18.8 Stainless Steel FINISHED HEX NUTS UNC - Unified National Coarse Thread Series 5026 SS IZE IZE NN OO - 014 - 016 - 018 - 020 - 022 - 024 - 026 B DOLT IAMETER DIAMETER IxNCHES LENGTH 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 5/8-11 3/4-10 PKG QTY KG CP ASE QQ TYTY 100 100 100 50 50 25 20 4800 3200 2400 1200 1200 600 320 SSIZE SIZE IZE IZE NN ON O OO DOLT IAMETER IAMETER DIAMETER PKG B DIAMETER LENGTH ENGTH x LENGTH QTY IxNCHES - 028 - 030 - 032 - 034 - 038 - 040 7/8-9 1-8 1 1/8-7 1 1/4-7 1 1/2-6 1 3/4-6 Note: Please use Series and Size No. when ordering: Example: 1/4 -20 UNC 18.8 Stainless Steel Finished Hex Nuts Series Size No. 5026 -014 PKG KG KG CPASE QTY TY QQ TYTY 10 10 10 10 10 10 160 120 90 90 60 40 Stock Sizes are shown in HEAVY type. 18.8 Stainless Steel FINISHED HEX NUTS UNF - Unified National Fine Thread Series 5027 SS IZE IZE NN OO - 014 - 016 - 018 - 020 - 022 B DOLT IAMETER DIAMETER IxNCHES LENGTH 1/4-28 5/16-24 3/8-24 7/16-20 1/2-20 PKG QTY 100 100 100 50 50 KG CP ASE QQ TYTY 4800 3200 2400 1200 1200 Note: Please use Series and Size No. when ordering: Example: 1/4 -28 UNF 18.8 Stainless Steel Finished Hex Nuts Series Size No. 5027 -014 NA14 January, 2009 SSIZE SIZE IZE IZE NN ON O OO DOLT IAMETER IAMETER DIAMETER PKG B DIAMETER LENGTH ENGTH x LENGTH QTY IxNCHES - 024 - 026 - 030 5/8-18 3/4-16 1-14 25 20 10 PKG KG KG CPASE QTY TY QQ TYTY 600 320 120 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel FINISHED HEX JAM NUTS UNC - Unified National Coarse Thread Series 5028 SS IZE IZE NN OO - 014 - 016 - 018 - 020 - 022 - 024 DOLT IAMETER B DIAMETER LENGTH IxNCHES 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 5/8-11 PKG QTY KG CP ASE QQ TYTY 100 100 100 50 50 25 4800 4800 3600 2400 1600 600 SIZE IZE SSIZE IZE O NN ON OO DOLT IAMETER DIAMETER PKG IAMETER B DIAMETER LENGTH x LENGTH QTY ENGTH IxNCHES - 026 - 028 - 030 3/4-10 7/8-9 1-8 Note: Please use Series and Size No. when ordering: Example: 1/4 -20 UNC 18.8 Stainless Steel Finished Hex Jam Nuts Series Size No. 5028 -014 PKG KG CPASE QTY TY QQ TYTY 20 10 10 480 320 240 Stock Sizes are shown in HEAVY type. 18.8 Stainless Steel FINISHED HEX JAM NUTS UNF - Unified National Fine Thread Series 5029 SS IZE IZE NN OO - 014 - 016 - 018 - 020 - 022 B DOLT IAMETER DIAMETER IxNCHES LENGTH 1/4-28 5/16-24 3/8-24 7/16-20 1/2-20 PKG QTY 100 100 100 50 50 KG CP ASE QQ TYTY 4800 4800 3600 2400 1600 SIZE IZE SSIZE IZE O NN ON OO - 024 - 026 - 028 - 030 Note: Please use Series and Size No. when ordering: Example: 1/4 -28 UNF 18.8 Stainless Steel Finished Hex Jam Nuts Series Size No. 5029 -014 DOLT IAMETER DIAMETER PKG B IAMETER DIAMETER LENGTH x LENGTH QTY IxNCHES ENGTH 5/8-18 3/4-16 7/8-14 1-14 PKG KG KG CPASE QTY TY QQ TYTY 25 20 10 10 600 480 320 240 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA15 18.8 Stainless Steel Series 5034 NYLON INSERT STOP NUTS UNC - Unified National Coarse Thread SS IZE IZE NN OO - 004 - 006 - 008 - 010 - 014 - 016 - 018 B DOLT IAMETER DIAMETER IxNCHES LENGTH 4-40 6-32 8-32 10-24 1/4-20 5/16-18 3/8-16 PKG QTY KG CP ASE QQ TYTY 100 100 100 100 100 100 100 8400 8400 7500 8400 4800 3200 2400 SSIZE SIZE IZE IZE NN ON O OO B DOLT IAMETER DIAMETER DIAMETER PKG IxNCHES LENGTH ENGTH x LENGTH QTY - 020 - 022 - 024 - 026 - 028 - 030 7/16-14 1/2-13 5/8-11 3/4-10 7/8-9 1-8 Note: Please use Series and Size No. when ordering: Example: 4-40 UNC 18.8 Stainless Steel Nylon Insert Stop Nuts Series Size No. 5034 -004 Series 5034 PKG KG KG CPASE QTY TY QQ TYTY 50 50 25 20 10 10 1200 800 400 240 160 120 Stock Sizes are shown in HEAVY type. 18.8 Stainless Steel NYLON INSERT STOP NUTS UNF - Unified National Fine Thread SS IZE IZE NN OO - 011 - 114 - 116 - 118 B DOLT IAMETER DIAMETER IxNCHES LENGTH 10-32 1/4-28 5/16-24 3/8-24 PKG QTY KG CP ASE QQ TYTY 100 100 100 100 7500 4800 3200 2400 SIZE IZE SSIZE IZE O NN ON OO - 122 - 124 - 126 Note: Please use Series and Size No. when ordering: Example: 1/4 -28 UNF 18.8 Stainless Steel Nylon Insert Stop Nuts Series Size No. 5034 -114 Series 5039 SS IZE IZE NN OO - 004 - 006 - 008 - 010 B DOLT IAMETER DIAMETER IxNCHES LENGTH 4-40 6-32 8-32 10-24 January, 2009 1/2-20 5/8-18 3/4-16 50 25 20 PKG KG KG CPASE QTY TY QQ TYTY 800 400 240 Stock Sizes are shown in HEAVY type. 18.8 Stainless Steel 'KEPS' NUTS PKG QTY KG CP ASE QQ TYTY 100 100 100 100 7500 7500 7500 7500 Note: Please use Series and Size No. when ordering: Example: 4-40 18.8 Stainless Steel 'Keps' Nuts Series Size No. 5039 -004 NA16 DOLT IAMETER DIAMETER PKG B DIAMETER LENGTH x LENGTH QTY IxNCHES ENGTH SSIZE SIZE IZE IZE NN ON O OO - 011 - 014 - 016 - 018 B DOLT IAMETER DIAMETER DIAMETER PKG IxNCHES LENGTH ENGTH x LENGTH QTY 10-32 UNF 1/4-20 5/16-18 3/8-16 100 100 100 100 PKG KG KG CPASE QTY TY QQ TYTY 7500 4500 3000 1600 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel Series 5035 SS IZE IZE NN OO - 002 - 004 - 005 - 006 - 008 - 010 HEX MACHINE SCREW NUTS B DOLT IAMETER DIAMETER IxNCHES LENGTH 2-56 4-40 5-40 6-32 8-32 10-24 PKG QTY 100 100 100 100 100 100 KG CP ASE QQ TYTY 7500 7500 7500 7500 7500 7500 SSIZE SIZE IZE IZE NN ON O OO B DOLT IAMETER IAMETER DIAMETER DIAMETER PKG IxNCHES LENGTH ENGTH x LENGTH QTY - 011 - 012 - 014 - 016 - 018 10-32 UNF 12-24 1/4-20 5/16-18 3/8-16 Note: Please use Series and Size No. when ordering: Example: 2-56 18.8 Stainless Steel Hex Machine Screw Nuts Series Size No. 5035 -002 PKG KG KG CPASE QTY TY QQ TYTY 100 100 100 100 100 7500 7500 7500 3000 2000 Stock Sizes are shown in HEAVY type. 18.8 Stainless Steel HEAVY SEMI-FINISHED HEX NUTS Series UNC - Unified National Coarse Thread 5035 SS IZE IZE NN OO - 914 - 916 - 918 - 920 - 922 - 924 B DOLT IAMETER DIAMETER IxNCHES LENGTH 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 5/8-11 PKG QTY 100 100 100 50 50 25 KG CP ASE QQ TYTY 4800 2400 1600 1200 600 400 SIZE IZE SSIZE IZE O NN ON OO - 926 - 928 - 930 Note: Please use Series and Size No. when ordering: Example: 1/4-20 UNC 18.8 Stainless Steel Heavy Semi-Finished Hex Nuts Series Size No. 5035 -914 DOLT IAMETER DIAMETER PKG B IAMETER DIAMETER LENGTH x LENGTH QTY IxNCHES ENGTH 3/4-10 7/8-9 1-8 20 10 10 PKG KG KG CPASE QTY TY QQ TYTY 240 120 120 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA17 Series 5037 SS IZE IZE NN OO - 006 - 008 - 010 - 011 - 014 B DOLT IAMETER DIAMETER IxNCHES LENGTH 6-32 8-32 10-24 10-32 UNF 1/4-20 18.8 Stainless Steel ACORN NUTS PKG QTY KG CP ASE QQ TYTY 100 100 100 100 100 7500 7500 4500 4500 4500 SSIZE SIZE IZE IZE NN ON O OO B DOLT IAMETER IAMETER DIAMETER DIAMETER PKG IxNCHES LENGTH ENGTH x LENGTH QTY - 016 - 018 - 022 - 024 - 026 5/16-18 3/8-16 1/2-13 5/8-11 3/4-10 Note: Please use Series and Size No. when ordering: Example: 6-32 18.8 Stainless Steel Acorn Nuts Series Size No. 5037 -006 Series 5038 SS IZE IZE NN OO - 006 - 008 - 010 - 011 B DOLT IAMETER DIAMETER IxNCHES LENGTH 6-32 8-32 10-24 10-32 UNF 5038 SS IZE IZE NN OO - 914 - 916 - 918 - 922 B DOLT IAMETER DIAMETER IxNCHES LENGTH 1/4-20 5/16-18 3/8-16 1/2-13 January, 2009 2000 1600 1200 400 160 18.8 Stainless Steel WING NUTS PKG QTY KG CP ASE QQ TYTY 100 100 100 100 4500 4500 4500 4500 SSIZE SIZE IZE IZE NN ON O OO B DOLT IAMETER DIAMETER DIAMETER PKG IxNCHES LENGTH ENGTH x LENGTH QTY - 014 - 016 - 018 - 022 1/4-20 5/16-18 3/8-16 1/2-13 PKG KG KG CPASE QTY TY QQ TYTY 100 100 100 50 2000 1600 1200 600 Stock Sizes are shown in HEAVY type. 18.8 Stainless Steel COUPLING NUTS PKG QTY 50 25 25 25 KG CP ASE QQ TYTY 1200 600 400 300 Note: Please use Series and Size No. when ordering: Example: 1/4 -20 18.8 Stainless Steel Coupling Nuts Series Size No. 5038 -914 NA18 100 100 50 25 20 Stock Sizes are shown in HEAVY type. Note: Please use Series and Size No. when ordering: Example: 6-32 18.8 Stainless Steel Wing Nuts Series Size No. 5038 -006 Series PKG KG KG CPASE QTY QQ TYTY SIZE IZE SSIZE IZE O NN ON OO DOLT IAMETER DIAMETER PKG B DIAMETER LENGTH x LENGTH QTY IxNCHES ENGTH - 924 - 926 - 930 5/8-11 3/4-10 1-8 PKG KG KG CPASE QTY TY QQ TYTY 15 15 10 120 90 60 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel Series 5055 SS IZE IZE NN OO - 202 - 204 - 206 - 208 - 210 - 212 - 214 - 216 218L 2181S FLAT WASHERS SDCREW IAMETER OR B x OLT LENGTH SIZE #2 #4 #6 #8 #10 #12 1/4 5/16 3/8 (1 0.D) 3/8 (7/8 O.D.) PKG QTY KG CP ASE QQ TYTY 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 7500 3000 4500 SIZE IZE SSIZE O NN ON OO DCREW IAMETER DIAMETER PKG S IAMETER OR x OLT LENGTH x LENGTH QTY B ENGTH SIZE - 220 - 222 - 224 - 226 - 228 - 230 - 232 - 234 - 238 7/16 1/2 5/8 3/4 7/8 1 1 1/8 1 1/4 1 1/2 Note: Please use Series and Size No. when ordering: Example: #2 18.8 Stainless Steel Flat Washers Series Size No. 5055 -202 5056 - 971 - 973 - 975 COUNTERSUNK FINISHING WASHERS SSCREW CREW OR OR B BOLT OLT S SIZE IZE #6 #8 #10 PKG QTY 100 100 100 KG CP ASE QQ TYTY 7500 7500 7500 SSIZE SIZE IZE IZE NN ON O OO - 977 - 979 - 981 S DCREW IAMETER IAMETER OR DIAMETER PKG B x OLT LENGTH ENGTH SIZE x LENGTH QTY #12 1/4 5/16 100 100 100 PKG KG KG CPASE QTY TY QQ TYTY 4500 4500 3000 Stock Sizes are shown in HEAVY type. 18.8 Stainless Steel Series 5057 - 394 - 395 - 396 - 398 - 400 2250 1500 1125 600 400 400 200 200 120 Stock Sizes are shown in HEAVY type. Note: Please use Series and Size No. when ordering: Example: #6 18.8 Stainless Steel Countersunk Finishing Washers Series Size No. 5056 -971 SS IZE IZE NN OO 50 50 25 20 20 20 10 10 10 18.8 Stainless Steel Series SS IZE IZE NN OO PKG KG KG CPASE QTY TY QQ TYTY FENDER WASHERS D SIAMETER CREW OR xBL ENGTH OLT SIZE #10 1/4 5/16 3/8 1/2 INSIDE PKG DIAMETER QTY 0.203 0.281 0.343 0.390 0.562 OUTSIDE DIAMETER 1" 1-1/4" 1-1/2" 1-1/2" 2" Note: Please use Series and Size No. when ordering: Example: #10 18.8 Stainless Steel Fender Washers Series Size No. 5057 -394 THICKNESS 0.062 0.078 0.078 0.078 0.100 PKG QTY 100 100 100 100 50 CASE QTY 2400 1600 1600 1600 600 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA19 Series 5058 SS IZE IZE NN OO - 002 - 004 - 006 - 008 - 010 - 012 - 014 - 016 - 018 SDCREW IAMETER OR B xOLT LENGTH SIZE #2 #4 #6 #8 #10 #12 1/4 5/16 3/8 18.8 Stainless Steel MEDIUM LOCK WASHERS PKG QTY 100 100 100 100 100 100 100 100 100 KG CP ASE QQ TYTY 7500 7500 7500 7500 7500 7500 7500 7500 4500 SSIZE SIZE IZE IZE NN ON O OO S DCREW IAMETER OR DIAMETER PKG B x OLT LENGTH ENGTH SIZE x LENGTH QTY - 020 - 022 - 024 - 026 - 028 - 030 7/16 1/2 5/8 3/4 7/8 1 Note: Please use Series and Size No. when ordering: Example: #2 18.8 Stainless Steel Medium Lock Washers Series Size No. 5058 -002 Series 5061 100 100 100 25 25 20 PKG KG CPASE QTY TY QQ TYTY 3000 2000 1600 500 500 400 Stock Sizes are shown in HEAVY type. 18.8 Stainless Steel TOOTH LOCK WASHERS EXTERNAL SS IZE IZE NN OO - 104 - 106 - 108 - 110 - 114 SDCREW IAMETER OR B xOLT LENGTH SIZE #4 #6 #8 #10 1/4 PKG QTY 100 100 100 100 100 KG CP ASE QQ TYTY 7500 7500 7500 7500 7500 SIZE IZE SSIZE IZE O NN ON OO DCREW IAMETER DIAMETER PKG S OR x OLT LENGTH x LENGTH QTY B ENGTH SIZE - 118 - 120 - 124 - 128 5/16 3/8 1/2 5/8 Note: Please use Series and Size No. when ordering: Example: #4 18.8 Stainless Steel Tooth Lock Washers External Series Size No. 5061 -104 Series 5062 100 100 100 100 PKG KG CPASE QTY Q TY QTYTY 7500 7500 4500 2000 Stock Sizes are shown in HEAVY type. 18.8 Stainless Steel TOOTH LOCK WASHERS INTERNAL SS IZE IZE NN OO - 204 - 206 - 208 - 210 - 214 SDCREW IAMETER OR B xOLT LENGTH SIZE #4 #6 #8 #10 1/4 PKG QTY 100 100 100 100 100 KG CP ASE QQ TYTY 7500 7500 7500 7500 7500 Note: Please use Series and Size No. when ordering: Example: #4 18.8 Stainless Steel Tooth Lock Washers Internal Series Size No. 5062 -204 NA20 January, 2009 SSIZE SIZE IZE IZE NN ON O OO - 218 - 220 - 224 - 228 S DCREW IAMETER OR DIAMETER PKG B x OLT LENGTH ENGTH SIZE x LENGTH QTY 5/16 3/8 1/2 5/8 100 100 100 100 PKG KG KG CPASE QTY TY QQ TYTY 7500 7500 4500 2000 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 420 Stainless Steel SPRING PINS Series 5079 SS IZE IZE NN OO - 040 - 041 - 042 - 043 - 044 - 045 - 047 - 083 - 085 - 086 - 087 - 088 - 089 - 090 - 091 - 134 - 136 - 137 - 138 - 139 - 140 - 141 - 143 - 145 - 147 - 167 D DIAMETER IAMETER xx LLENGTH ENGTH 1/16x5/16 1/16x3/8 1/16x7/16 1/16x1/2 1/16x5/8 1/16x3/4 1/16x1 3/32x5/16 3/32x3/8 3/32x7/16 3/32x1/2 3/32x5/8 3/32x3/4 3/32x7/8 3/32x1 1/8x3/8 1/8x7/16 1/8x1/2 1/8x5/8 1/8x3/4 1/8x7/8 1/8x1 1/8x1-1/4 1/8x1-1/2 1/8x1-3/4 5/32x1 PKG QTY KG CP ASE QQ TYTY 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 500 500 500 500 500 500 500 500 500 500 500 Note: Please use Series and Size No. when ordering: Example: 1/16 x 5/16 420 Stainless Steel Spring Pins Series Size No. 5079 -040 SIZE IZE SSIZE IZE O NN ON OO - 171 - 172 - 173 - 174 - 189 - 191 - 193 - 195 - 197 - 200 - 202 - 305 - 307 - 309 - 311 - 313 - 314 - 315 - 316 - 317 - 318 - 320 - 489 - 493 - 498 - 500 DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH 5/32x1-1/2 5/32x1-5/8 5/32x1-3/4 5/32x2 3/16x1/2 3/16x3/4 3/16x1 3/16x1-1/4 3/16x1-1/2 3/16x2 3/16x2-1/2 1/4x1/2 1/4x3/4 1/4x1 1/4x1-1/4 1/4x1-1/2 1/4x1-5/8 1/4x1-3/4 1/4x2 1/4x2-1/4 1/4x2-1/2 1/4x3 3/8x1 3/8x1-1/2 3/8-2-1/2 3/8x3 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 PKG KG KG CPASE QTY TY QQ TYTY 500 500 500 500 500 500 500 500 500 500 500 250 250 250 250 250 250 250 250 250 250 250 100 100 100 100 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA21 18.8 Stainless Steel COTTER PINS Series 5080 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO D DIAMETER IAMETER IAMETER DIAMETER PKG xx L LENGTH ENGTH ENGTH x LENGTH QTY - 193 - 195 - 197 - 199 - 200 - 202 - 204 - 206 - 208 3/16X1 3/16X1 1/4 3/16X1 1/2 3/16X1 3/4 3/16X2 3/16X2 1/2 3/16X3 3/16X3 1/2 3/16X4 - 307 - 311 - 313 - 316 - 318 - 320 - 322 - 324 1/4X1 1/4X1 1/4 1/4X1 1/2 1/4X2 1/4X2 1/2 1/4X3 1/4X3 1/2 1/4X4 - 444 - 446 - 448 - 451 - 453 - 455 - 457 - 459 - 461 5/16X1 5/16X1 1/4 5/16X1 1/2 5/16X2 5/16X2 1/2 5/16X3 5/16X3 1/2 5/16X4 5/16X5 - 496 - 498 - 500 - 502 - 504 - 506 3/8X2 3/8X2 1/2 3/8X3 3/8X3 1/2 3/8X4 3/8X5 1/16" Diameter - 043 - 045 - 047 - 049 - 051 - 053 - 054 1/16X1/2 1/16X3/4 1/16X1 1/16X1 1/4 1/16X1 1/2 1/16X1 3/4 1/16X2 - 087 - 089 - 091 - 093 - 095 - 097 - 098 - 100 3/32X1/2 3/32X3/4 3/32X1 3/32X1 1/4 3/32X1 1/2 3/32X1 3/4 3/32X2 3/32X2 1/2 - 137 - 139 - 141 - 143 - 145 - 147 - 148 - 150 - 152 1/8X1/2 1/8X3/4 1/8X1 1/8X1 1/4 1/8X1 1/2 1/8X1 3/4 1/8X2 1/8X2 1/2 1/8X3 - 165 - 167 - 169 - 171 - 173 - 174 - 176 - 178 5/32X3/4 5/32X1 5/32X1 1/4 5/32X1 1/2 5/32X1 3/4 5/32X2 5/32X2 1/2 5/32X3 3/16" Diameter 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 3000 3000 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 3000 3000 3000 100 100 100 100 100 100 100 100 100 4500 7500 4500 4500 3000 3000 2000 2000 1600 100 100 100 100 100 100 100 100 4500 4500 3000 2000 2000 2000 2000 2000 3/32" Diameter 1/8" Diameter 5/32" Diameter Note: Please use Series and Size No. when ordering: Example: 1/16 x 1/2 18.8 Stainless Steel Cotter Pins Series Size No. 5080 -043 NA22 January, 2009 PKG KG KG CPASE QTY QQ TYTY 50 50 50 50 50 50 50 50 50 1000 1000 1000 1000 1000 800 600 800 400 50 50 50 50 25 25 25 25 1000 1000 1000 1000 400 400 200 200 50 50 50 50 25 25 25 25 25 800 800 800 800 150 150 150 200 200 25 25 25 25 25 25 300 300 300 150 150 150 1/4" Diameter 5/16" Diameter 3/8" Diameter Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited Series 5091 SS IZE IZE NN OO - 302 - 304 - 306 - 308 - 310 - 314 - 316 - 318 18.8 Stainless Steel THREADED ROD - 3 FOOT D DIAMETER IAMETER xx LLENGTH ENGTH PP KG KG QQ TYTY 2-56X3' 4-40X3' 6-32X3' 8-32X3' 10-24X3' 1/4-20X3' 5/16-18X3' 3/8-16X3' 1 1 1 1 1 1 1 1 SIZE IZE SSIZE IZE O NN ON OO DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH - 320 - 322 - 324 - 326 - 328 - 330 7/16-14X3' 1/2-13X3' 5/8-11X3' 3/4-10X3' 7/8-9X3' 1-8X3' Note: Please use Series and Size No. when ordering: Example: 2-56 x 3' UNC 18.8 Stainless Steel Threaded Rods - 3 Foot Series Size No. 5091 -302 Series 5091 SS IZE IZE NN OO - 354 - 356 - 358 - 362 THREADED ROD - 6 FOOT PKG PKG QQ TYTY 1/4-20X6' 5/16-18X6' 3/8-16X6' 1/2-13X6' 1 1 1 1 Series 5091 - 364 - 366 - 368 - 370 5/8-11X6' 3/4-10X6' 7/8-9X6' 1-8X6' - 311 - 514 - 516 - 518 10-32X3' 1/4-28X3' 5/16-24X3' 3/8-24X3' PKG QTY 1 1 1 1 1 1 1 1 UNF - Unified National Fine Thread SSIZE SIZE IZE NN ON O OO D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH ENGTH x LENGTH QTY - 522 - 524 - 526 1/2-20X3' 5/8-18X3' 3/4-16X3' Note: Please use Series and Size No. when ordering: Example: 1/4 -28 x 3' UNF 18.8 Stainless Steel Threaded Rod -3 Foot Series Size No. 5091 -514 PKG PKG QTYQTY Stock Sizes are shown in HEAVY type. THREADED ROD - 3 FOOT D DIAMETER IAMETER xx LLENGTH ENGTH UNC - Unified National Coarse Thread D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH ENGTH x LENGTH QTY 18.8 Stainless Steel SS IZE IZE NN OO 1 1 1 1 1 1 SSIZE SIZE IZE IZE NN ON O OO Note: Please use Series and Size No. when ordering: Example: 1/4 -20 x 6' UNC 18.8 Stainless Steel Threaded Rod - 6 Foot Series Size No. 5091 -354 PKG PKG KG QTYQTY TY Stock Sizes are shown in HEAVY type. 18.8 Stainless Steel D DIAMETER IAMETER xx LLENGTH ENGTH UNC - Unified National Coarse Thread PKG PKG QTYQTY 1 1 1 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA23 18.8 Stainless Steel Series 5091 ROUND ROD - 3 FOOT SS IZE IZE NN OO - 410 D DIAMETER IAMETER xx LLENGTH ENGTH PP KG KG QQ TYTY 3/16x3' 1 Note: Please use Series and Size No. when ordering: Example: 3/16 x 3' 18.8 Stainless Steel Round Rods - 3 Foot Series Size No. 5091 -410 18.8 Stainless Steel Series 5091 SS IZE IZE NN OO FLATS - 3 FOOT DIAMETER X WIDTH THICKNESS x ENGTH LENGTH xL - 600 1/8x3/4x3' P PKG KG Q QTY TY 1 Note: Please use Series and Size No. when ordering: Example: 1/8 x 3/4 x 3' 18.8 Stainless Steel Flats - 3 Foot Series Size No. 5091 -600 NA24 Stock Sizes are shown in HEAVY type. January, 2009 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel FLAT HEAD SLOT MACHINE SCREWS Series 5102 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE NN ON OO D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH x LENGTH QTY 2-56 - 014 - 015 - 016 - 017 - 019 - 020 - 021 2-56X3/16 2-56X1/4 2-56X5/16 2-56X3/8 2-56X1/2 2-56X5/8 2-56X3/4 - 036 - 038 - 039 - 040 - 041 - 042 - 043 - 044 - 045 - 047 - 049 4-40X1/8 4-40X3/16 4-40X1/4 4-40X5/16 4-40X3/8 4-40X7/16 4-40X1/2 4-40X5/8 4-40X3/4 4-40X1 4-40X1 1/4 - 082 - 083 - 084 - 085 - 087 - 088 - 089 - 090 - 091 - 093 - 095 - 098 - 100 - 102 6-32X3/16 6-32X1/4 6-32X5/16 6-32X3/8 6-32X1/2 6-32X5/8 6-32X3/4 6-32X7/8 6-32X1 6-32X1 1/4 6-32X1 1/2 6-32X2 6-32X2 1/2 6-32X3 PKG KG KG CPASE QTY TY QQ TYTY 8-32 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 100 100 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 4500 3000 3000 3000 4-40 6-32 - 133 - 134 - 135 - 137 - 138 - 139 - 140 - 141 - 143 - 145 - 147 - 148 - 150 - 152 8-32X1/4 8-32X5/16 8-32X3/8 8-32X1/2 8-32X5/8 8-32X3/4 8-32X7/8 8-32X1 8-32X1 1/4 8-32X1 1/2 8-32X1 3/4 8-32X2 8-32X2 1/2 8-32X3 - 185 - 186 - 187 - 188 - 189 - 190 - 191 - 192 - 193 - 195 - 197 - 199 - 200 - 201 - 202 - 203 - 204 - 206 - 208 10-24X1/4 10-24X5/16 10-24X3/8 10-24X7/16 10-24X1/2 10-24X5/8 10-24X3/4 10-24X7/8 10-24X1 10-24X1 1/4 10-24X1 1/2 10-24X1 3/4 10-24X2 10-24X2 1/4 10-24X2 1/2 10-24X2 3/4 10-24X3 10-24X3 1/2 10-24X4 100 100 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 4500 4500 4500 3000 2000 2000 2000 1200 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 7500 7500 7500 7500 7500 7500 4500 4500 4500 3000 3000 2000 2000 1600 1600 1600 1600 800 600 10-24 Note: Please use Series and Size No. when ordering: Example: 2-56 x 3/16 18.8 Stainless Steel Flat Head Slot Machine Screws Series Size No. 5102 -014 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA25 18.8 Stainless Steel FLAT HEAD SLOT MACHINE SCREWS Series 5102 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO 10-32 - 213 - 214 - 215 - 217 - 218 - 219 - 220 - 221 - 223 - 225 - 227 - 228 - 229 - 230 - 232 - 234 - 236 10-32X1/4 10-32X5/16 10-32X3/8 10-32X1/2 10-32X5/8 10-32X3/4 10-32X7/8 10-32X1 10-32X1 1/4 10-32X1 1/2 10-32X1 3/4 10-32X2 10-32X2 1/4 10-32X2 1/2 10-32X3 10-32X3 1/2 10-32X4 - 246 - 247 - 248 - 250 - 252 - 254 - 257 12-24X1/2 12-24X5/8 12-24X3/4 12-24X1 12-24X1 1/4 12-24X1 1/2 12-24X2 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 4500 4500 4500 7500 4500 4500 4500 4500 3000 3000 2000 2000 1600 1600 1200 400 400 100 100 100 100 100 100 100 4500 4500 4500 3000 3000 2000 1600 1/4-20 1/4-20X3/8 1/4-20X7/16 1/4-20X1/2 1/4-20X5/8 1/4-20X3/4 1/4-20X7/8 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2 1/4-20X1 3/4 100 100 100 100 100 100 100 100 100 100 4500 3000 4500 3000 3000 2000 2000 2000 2000 1600 - 316 - 317 - 318 - 319 - 320 - 322 - 324 - 325 - 326 - 329 1/4-20X2 1/4-20X2 1/4 1/4-20X2 1/2 1/4-20X2 3/4 1/4-20X3 1/4-20X3 1/2 1/4-20X4 1/4-20X4 1/2 1/4-20X5 1/4-20X6 - 441 - 442 - 443 - 444 - 446 - 448 - 450 - 451 - 453 - 454 - 455 - 457 - 459 5/16-18X5/8 5/16-18X3/4 5/16-18X7/8 5/16-18X1 5/16-18X1 1/4 5/16-18X1 1/2 5/16-18X1 3/4 5/16-18X2 5/16-18X2 1/2 5/16-18X2 3/4 5/16-18X3 5/16-18X3 1/2 5/16-18X4 January, 2009 100 100 100 100 100 50 50 25 25 25 1200 1200 1200 800 800 400 400 150 200 200 50 50 50 50 50 50 50 50 25 25 25 25 25 1000 1000 1000 1000 1000 800 800 800 400 400 400 400 400 50 50 50 50 50 50 25 25 25 25 25 25 1000 1000 800 800 600 400 150 400 150 200 200 200 5/16-18 3/8-16 - 487 - 489 - 491 - 493 - 495 - 496 - 497 - 498 - 499 - 500 - 502 - 504 Note: Please use Series and Size No. when ordering: Example: 10-32 x 1/4 18.8 Stainless Steel Flat Head Slot Machine Screws Series Size No. 5102 -213 NA26 PKG KG KG CPASE QTY TY QQ TYTY 1/4-20 12-24 - 303 - 304 - 305 - 306 - 307 - 308 - 309 - 311 - 313 - 315 DIAMETER IAMETER DIAMETER PKG D LENGTH ENGTH x LENGTH QTY xx L ENGTH 3/8-16X3/4 3/8-16X1 3/8-16X1 1/4 3/8-16X1 1/2 3/8-16X1 3/4 3/8-16X2 3/8-16X2 1/4 3/8-16X2 1/2 3/8-16X2 3/4 3/8-16X3 3/8-16X3 1/2 3/8-16X4 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel ROUND HEAD SLOT MACHINE SCREWS Series 5103 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO D DIAMETER IAMETER IAMETER DIAMETER PKG xx L LENGTH ENGTH ENGTH x LENGTH QTY 2-56 - 014 - 015 - 019 - 021 2-56X3/16 2-56X1/4 2-56X1/2 2-56X3/4 - 039 - 040 - 041 - 043 - 044 - 045 - 047 - 049 4-40X1/4 4-40X5/16 4-40X3/8 4-40X1/2 4-40X5/8 4-40X3/4 4-40X1 4-40X1 1/4 8-32 100 100 100 100 7500 7500 7500 7500 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 7500 100 100 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7800 7500 7500 7500 7500 4500 4500 3000 2000 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 4500 4-40 6-32 - 083 - 084 - 085 - 087 - 088 - 089 - 090 - 091 - 093 - 095 - 097 - 098 - 100 - 102 6-32X1/4 6-32X5/16 6-32X3/8 6-32X1/2 6-32X5/8 6-32X3/4 6-32X7/8 6-32X1 6-32X1 1/4 6-32X1 1/2 6-32X1 3/4 6-32X2 6-32X2 1/2 6-32X3 - 133 - 134 - 135 - 137 - 138 - 139 - 140 8-32X1/4 8-32X5/16 8-32X3/8 8-32X1/2 8-32X5/8 8-32X3/4 8-32X7/8 PKG KG KG CPASE QTY TY QQ TYTY - 141 - 143 - 145 - 147 - 148 - 150 - 152 - 156 8-32X1 8-32X1 1/4 8-32X1 1/2 8-32X1 3/4 8-32X2 8-32X2 1/2 8-32X3 8-32x4 - 185 - 186 - 187 - 189 - 190 - 191 - 192 - 193 - 195 - 197 - 199 - 200 - 201 - 202 - 203 - 204 - 206 -208 -209 10-24X1/4 10-24X5/16 10-24X3/8 10-24X1/2 10-24X5/8 10-24X3/4 10-24X7/8 10-24X1 10-24X1 1/4 10-24X1 1/2 10-24X1 3/4 10-24X2 10-24X2 1/4 10-24X2 1/2 10-24X2 3/4 10-24X3 10-24X3 1/2 10-24X4 10-24X4 1/2 100 100 100 100 100 100 100 100 4500 4500 3000 3000 2000 1600 1600 1600 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 7500 7500 7500 7500 7500 4500 7500 4500 3000 3000 2000 2000 1600 1600 1600 800 400 800 800 100 100 100 100 100 100 7500 7500 7500 7500 4500 4500 10-24 8-32 10-32 - 213 - 214 - 215 - 217 - 218 - 219 10-32X1/4 10-32X5/16 10-32X3/8 10-32X1/2 10-32X5/8 10-32X3/4 Note: Please use Series and Size No. when ordering: Example: 2-56 x 3/16 18.8 Stainless Steel Round Head Slot Machine Screws Series Size No. 5103 -014 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA27 18.8 Stainless Steel ROUND HEAD SLOT MACHINE SCREWS Series 5103 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO D DIAMETER IAMETER DIAMETER PKG xx L LENGTH ENGTH ENGTH x LENGTH QTY 1/4 -20 10-32 - 220 - 221 - 223 - 225 - 227 - 228 - 229 - 230 - 231 - 232 - 234 10-32X7/8 10-32X1 10-32X1 1/4 10-32X1 1/2 10-32X1 3/4 10-32X2 10-32X2 1/4 10-32X2 1/2 10-32X2 3/4 10-32X3 10-32X3 1/2 - 246 - 248 - 250 - 252 - 254 - 257 12-24X1/2 12-24X3/4 12-24X1 12-24X1 1/4 12-24X1 1/2 12-24X2 - 303 - 305 - 306 - 307 - 308 - 309 - 311 - 313 - 315 - 316 - 317 - 318 - 319 - 320 - 322 1/4-20X3/8 1/4-20X1/2 1/4-20X5/8 1/4-20X3/4 1/4-20X7/8 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2 1/4-20X1 3/4 1/4-20X2 1/4-20X2 1/4 1/4-20X2 1/2 1/4-20X2 3/4 1/4-20X3 1/4-20X3 1/2 PKG KG CPASE QTY TY QQ TYTY 100 100 100 100 100 100 100 100 100 100 50 4500 4500 3000 3000 2000 2000 2000 1600 1600 1600 800 100 100 100 100 100 100 4500 4500 3000 2000 2000 1600 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 4500 4500 3000 3000 2000 2000 2000 1600 1600 1200 1200 1200 800 600 300 12-24 - 324 - 325 -326 -329 1/4-20X4 1/4-20X4 1/2 1/4-20X5 1/4-20X6 - 442 - 444 - 446 - 448 - 450 - 451 - 452 - 453 - 454 - 455 - 457 - 459 5/16-18X3/4 5/16-18X1 5/16-18X1 1/4 5/16-18X1 1/2 5/16-18X1 3/4 5/16-18X2 5/16-18X2 1/4 5/16-18X2 1/2 5/16-18X2 3/4 5/16-18X3 5/16-18X3 1/2 5/16-18X4 - 487 - 488 - 489 - 491 - 493 - 495 - 496 - 498 - 499 - 500 - 502 - 504 3/8-16X3/4 3/8X7/8 3/8-16X1 3/8-16X1 1/4 3/8-16X1 1/2 3/8-16X1 3/4 3/8-16X2 3/8-16X2 1/2 3/8-16X2 3/4 3/8-16X3 3/8-16X3 1/2 3/8-16X4 50 25 25 25 300 200 200 200 50 50 50 50 50 50 25 25 25 25 25 25 1000 1000 800 600 600 600 500 500 150 150 400 200 50 50 50 50 50 50 50 25 25 25 25 25 800 800 600 400 400 300 300 400 400 200 200 200 5/16-18 1/4 -20 3/8-16 Note: Please use Series and Size No. when ordering: Example: 10-32 x 7/8 18.8 Stainless Steel Round Head Slot Machine Screws Series Size No. 5103 -220 NA28 January, 2009 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel OVAL HEAD SLOT MACHINE SCREWS Series 5104 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO 6-32 - 085 - 087 - 089 - 091 - 093 - 095 - 098 6-32X3/8 6-32X1/2 6-32X3/4 6-32X1 6-32X1 1/4 6-32X1 1/2 6-32X2 - 137 - 138 - 139 - 141 - 143 - 145 - 147 - 148 - 150 8-32-1/2 8-32x5/8 8-32X3/4 8-32X1 8-32X1 1/4 8-32X1 1/2 8-32X1 3/4 8-32X2 8-32X2 1/2 - 187 - 189 - 191 - 193 - 195 - 197 - 199 - 200 - 202 - 204 10-24X3/8 10-24X1/2 10-24X3/4 10-24X1 10-24X1 1/4 10-24X1 1/2 10-24X1 3/4 10-24X2 10-24X2 1/2 10-24X3 D DIAMETER IAMETER DIAMETER PKG xx L LENGTH ENGTH ENGTH x LENGTH QTY PKG KG CPASE QTY TY QQ TYTY 10-32 100 100 100 100 100 100 100 7500 7500 7500 7500 4500 4500 3000 100 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 3000 2000 2000 2000 100 100 100 100 100 100 100 100 100 100 7500 7500 4500 4500 3000 3000 2000 2000 1600 1600 8-32 10-24 - 215 - 217 - 219 - 221 - 223 - 225 - 227 - 228 - 230 10-32X3/8 10-32X1/2 10-32X3/4 10-32X1 10-32X1 1/4 10-32X1 1/2 10-32X1 3/4 10-32X2 10-32X2 1/2 - 307 - 309 - 311 - 313 - 315 - 316 - 318 - 320 1/4-20X3/4 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2 1/4-20X1 3/4 1/4-20X2 1/4-20X2 1/2 1/4-20X3 - 440 - 442 - 444 - 446 - 448 - 450 - 451 5/16-18X1/2 5/16-18X3/4 5/16-18X1 5/16-18X1 1/4 5/16-18X1 1/2 5/16-18X1 3/4 5/16-18X2 100 100 100 100 100 100 100 100 100 7500 7500 4500 4500 3000 3000 2000 1600 1600 100 100 100 100 100 100 100 100 3000 2000 2000 1600 1600 1200 800 800 50 50 50 50 50 50 50 1500 1000 800 800 600 600 600 1/4-20 5/16-18 Note: Please use Series and Size No. when ordering: Example: 6-32 x 3/8 18.8 Stainless Steel Oval Head Slot Machine Screws Series Size No. 5104 -085 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA29 18.8 Stainless Steel PAN HEAD SLOT MACHINE SCREWS Series 5105 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO 2-56 - 015 - 017 - 019 - 021 2-56X1/4 2-56X3/8 2-56X1/2 2-56X3/4 - 038 - 039 - 040 - 041 - 043 - 044 - 045 - 047 4-40X3/16 4-40X1/4 4-40X5/16 4-40X3/8 4-40X1/2 4-40X5/8 4-40X3/4 4-40X1 7500 7500 7500 7500 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 7500 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 7500 7500 4500 4500 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 4500 4500 3000 2000 6-32 6-32X3/16 6-32X1/4 6-32X5/16 6-32X3/8 6-32X1/2 6-32X5/8 6-32X3/4 6-32X7/8 6-32X1 6-32X1 1/4 6-32X1 1/2 - 133 - 134 - 135 - 137 - 138 - 139 - 141 - 143 - 145 - 148 8-32X1/4 8-32X5/16 8-32X3/8 8-32X1/2 8-32X5/8 8-32X3/4 8-32X1 8-32X1 1/4 8-32X1 1/2 8-32X2 - 185 - 187 - 189 - 190 - 191 - 193 - 195 - 197 - 200 - 202 - 204 - 208 - 213 - 214 - 215 - 217 - 218 - 219 - 221 - 223 - 225 - 228 - 232 10-32X1/4 10-32X5/16 10-32X3/8 10-32X1/2 10-32X5/8 10-32X3/4 10-32X1 10-32X1 1/4 10-32X1 1/2 10-32X2 10-32X3 - 303 - 305 - 306 - 307 - 309 - 311 - 313 - 316 - 318 - 320 1/4-20X3/8 1/4-20X1/2 1/4-20X5/8 1/4-20X3/4 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2 1/4-20X2 1/4-20X2 1/2 1/4-20X3 100 100 100 100 100 100 100 100 100 100 100 50 7500 7500 7500 4500 4500 3000 3000 3000 2000 1600 1600 400 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 4500 3000 3000 2000 2000 1600 100 100 100 100 100 100 100 100 100 100 4500 4500 3000 3000 2000 2000 1600 1200 800 800 1/4-20 Note: Please use Series and Size No. when ordering: Example: 2-56 x 1/4 18.8 Stainless Steel Pan Head Slot Machine Screws Series Size No. 5105 -015 January, 2009 10-24X1/4 10-24X3/8 10-24X1/2 10-24X5/8 10-24X3/4 10-24X1 10-24X1 1/4 10-24X1 1/2 10-24X2 10-24X2 1/2 10-24X3 10-24X4 10-32 8-32 NA30 PKG KG KG CPASE QTY TY QQ TYTY 10-24 100 100 100 100 4-40 - 082 - 083 - 084 - 085 - 087 - 088 - 089 - 090 - 091 - 093 - 095 DIAMETER IAMETER DIAMETER PKG D LENGTH ENGTH x LENGTH QTY xx L ENGTH Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel TRUSS HEAD SLOT MACHINE SCREWS Series 5107 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE O NN ON OO 6-32 - 083 - 084 - 085 - 087 - 089 - 091 - 093 6-32X1/4 6-32X5/16 6-32X3/8 6-32X1/2 6-32X3/4 6-32X1 6-32X1 1/4 - 133 - 135 - 137 - 138 - 139 - 141 - 143 - 145 8-32X1/4 8-32X3/8 8-32X1/2 8-32X5/8 8-32X3/4 8-32X1 8-32X1 1/4 8-32X1 1/2 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 4500 4500 100 100 100 100 100 100 100 100 7500 7500 7500 7500 4500 4500 4500 3000 100 100 100 100 100 100 100 100 7500 7500 4500 4500 4500 3000 3000 2000 10-24 10-24X1/4 10-24X3/8 10-24X1/2 10-24X5/8 10-24X3/4 10-24X1 10-24X1 1/4 10-24X1 1/2 PKG KG KG CPASE QTY TY QQ TYTY 10-32 8-32 - 185 - 187 - 189 - 190 - 191 - 193 - 195 - 197 DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH - 213 - 215 - 217 - 218 - 219 - 221 - 223 - 225 - 228 10-32X1/4 10-32X3/8 10-32X1/2 10-32X5/8 10-32X3/4 10-32X1 10-32X1 1/4 10-32X1 1/2 10-32X2 - 305 - 306 - 307 - 308 - 309 - 311 - 313 1/4-20X1/2 1/4-20X5/8 1/4-20X3/4 1/4-20X7/8 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2 100 100 100 100 100 100 100 100 100 7500 7500 4500 4500 4500 3000 2000 2000 2000 100 100 100 100 100 100 100 3000 3000 2000 2000 2000 1600 1600 1/4-20 Note: Please use Series and Size No. when ordering: Example: 6-32 x 1/4 18.8 Stainless Steel Truss Head Slot Machine Screws Series Size No. 5107 -083 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA31 18.8 Stainless Steel ROUND SOCKET MACHINE SCREWS Series 5109 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO 6-32 - 087 - 089 6-32X1/2 6-32X3/4 - 137 - 139 - 141 - 143 - 145 8-32X1/2 8-32X3/4 8-32X1 8-32X1 1/4 8-32X1 1/2 - 189 - 191 - 193 - 195 - 197 10-24X1/2 10-24X3/4 10-24X1 10-24X1 1/4 10-24X1 1/2 100 100 7500 7500 100 100 100 100 100 7500 7500 4500 4500 3000 100 100 100 100 100 7500 4500 4500 3000 3000 10-24 - 217 - 219 - 221 - 223 - 225 10-32X1/2 10-32X3/4 10-32X1 10-32X1 1/4 10-32X1 1/2 - 305 - 306 - 307 - 309 - 311 - 313 - 316 1/4-20X1/2 1/4-20X5/8 1/4-20X3/4 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2 1/4-20X2 100 100 100 100 100 7500 4500 4500 3000 3000 100 100 100 100 100 100 100 4500 3000 3000 2000 2000 1600 1200 1/4-20 Note: Please use Series and Size No. when ordering: Example: 6-32 x 1/2 18.8 Stainless Steel Round Socket Machine Screws Series Size No. 5109 -087 January, 2009 PKG KG KG CPASE QTY TY QQ TYTY 10-32 8-32 NA32 DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel FLAT HEAD PHILLIPS MACHINE SCREWS Series 5111 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH 2-56 - 015 - 016 - 017 - 019 2-56X1/4 2-56X5/16 2-56X3/8 2-56X1/2 - 038 - 039 - 040 - 041 - 043 - 044 - 045 - 047 4-40X3/16 4-40X1/4 4-40X5/16 4-40X3/8 4-40X1/2 4-40X5/8 4-40X3/4 4-40X1 - 082 - 083 - 084 - 085 - 087 - 088 - 089 - 090 - 091 - 093 - 095 6-32X3/16 6-32X1/4 6-32X5/16 6-32X3/8 6-32X1/2 6-32X5/8 6-32X3/4 6-32X7/8 6-32X1 6-32X1 1/4 6-32X1 1/2 PKG KG KG CPASE QTY QQ TYTY 8-32 100 100 100 100 7500 7500 7500 7500 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 7500 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 7500 7500 4500 4500 4-40 - 133 - 134 - 135 - 136 - 137 - 138 - 139 - 140 - 141 - 143 - 145 - 147 - 148 8-32X1/4 8-32X5/16 8-32X3/8 8-32X7/16 8-32X1/2 8-32X5/8 8-32X3/4 8-32X7/8 8-32X1 8-32X1 1/4 8-32X1 1/2 8-32X1 3/4 8-32X2 100 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 7500 4500 4500 3000 3000 2000 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 7500 7500 7500 7500 7500 4500 4500 4500 3000 3000 2000 2000 1600 1600 1200 10-24 6-32 - 185 - 186 - 187 - 189 - 190 - 191 - 192 - 193 - 195 - 197 - 199 - 200 - 202 - 204 - 206 10-24X1/4 10-24X5/16 10-24X3/8 10-24X1/2 10-24X5/8 10-24X3/4 10-24X7/8 10-24X1 10-24X1 1/4 10-24X1 1/2 10-24X1 3/4 10-24X2 10-24X2 1/2 10-24X3 10-24X3 1/2 Note: Please use Series and Size No. when ordering: Example: 2-56 x 1/4 18.8 Stainless Steel Flat Head Phillips Machine Screws Series Size No. 5111 -015 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA33 18.8 Stainless Steel FLAT HEAD PHILLIPS MACHINE SCREWS Series 5111 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH 10-32 - 213 - 214 - 215 - 217 - 218 - 219 - 220 - 221 - 223 - 225 - 227 - 228 - 230 10-32X1/4 10-32X5/16 10-32X3/8 10-32X1/2 10-32X5/8 10-32X3/4 10-32X7/8 10-32X1 10-32X1 1/4 10-32X1 1/2 10-32X1 3/4 10-32X2 10-32X2 1/2 PKG KG KG CPASE QTY TY QQ TYTY 1/4-20 100 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 4500 4500 4500 3000 3000 2000 2000 1600 - 303 - 305 - 306 - 307 - 309 - 311 - 313 - 315 - 316 - 318 - 320 - 322 - 324 1/4-20X3/8 1/4-20X1/2 1/4-20X5/8 1/4-20X3/4 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2 1/4-20X1 3/4 1/4-20X2 1/4-20X2 1/2 1/4-20X3 1/4-20X3 1/2 1/4-20X4 - 442 - 444 - 446 - 448 - 451 - 453 - 455 - 457 5/16-18X3/4 5/16-18X1 5/16-18X1 1/4 5/16-18X1 1/2 5/16-18X2 5/16-18X2 1/2 5/16-18X3 5/16-18X3 1/2 100 100 100 100 100 100 100 100 100 100 100 50 50 4500 4500 4500 3500 3000 2000 2000 1600 1600 800 800 400 400 50 50 50 50 25 25 25 25 1000 1000 800 800 500 500 400 400 5/16-18 Note: Please use Series and Size No. when ordering: Example: 10-32 x 1/4 18.8 Stainless Steel Flat Head Phillips Machine Screws Series Size No. 5111 -213 NA34 January, 2009 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel OVAL HEAD PHILLIPS MACHINE SCREWS Series 5113 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO D DIAMETER IAMETER DIAMETER PKG xx L LENGTH ENGTH ENGTH x LENGTH QTY 6-32 - 085 - 087 - 089 - 091 - 093 - 095 6/32X3/8 6-32X1/2 6-32X3/4 6-32X1 6-32X1 1/4 6-32X1 1/2 - 135 - 137 - 138 - 139 - 141 - 143 - 145 - 148 8-32X3/8 8-32X1/2 8-32X5/8 8-32X3/4 8-32X1 8-32X1 1/4 8-32X1 1/2 8-32X2 - 187 - 189 - 190 - 191 - 193 - 195 - 197 - 199 - 200 - 202 - 204 - 206 - 208 10-24X3/8 10-24X1/2 10-24X5/8 10-24X3/4 10-24X1 10-24X1 1/4 10-24X1 1/2 10-24X1 3/4 10-24X2 10-24X2 1/2 10-24X3 10-24X3 1/2 10-24X4 PKG KG CPASE QTY TY QQ TYTY 10-32 100 100 100 100 100 100 7500 7500 7500 7500 4500 4500 100 100 100 100 100 100 100 100 7500 7500 7500 7500 4500 4500 3000 2000 100 100 100 100 100 100 100 100 100 100 100 50 50 7500 7500 7500 4500 4500 3000 3000 2000 2000 1600 1600 1200 1200 8-32 10-24 - 215 - 217 - 218 - 219 - 221 - 223 - 225 - 228 10-32X3/8 10-32X1/2 10-32X5/8 10-32X3/4 10-32X1 10-32X1 1/4 10-32X1 1/2 10-32X2 - 305 - 306 - 307 - 309 - 311 - 313 - 316 - 318 - 320 - 324 1/4-20X1/2 1/4-20X5/8 1/4-20X3/4 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2 1/4-20X2 1/4-20X2 1/2 1/4-20X3 1/4-20X4 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 3000 3000 2000 100 100 100 100 100 100 100 100 100 50 4500 4500 3000 2000 2000 1600 1200 1200 800 800 1/4-20 Note: Please use Series and Size No. when ordering: Example:6/32 x 3/8 18.8 Stainless Steel Oval Head Phillips Machine Screws Series Size No. 5113 -085 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA35 18.8 Stainless Steel PAN HEAD PHILLIPS MACHINE SCREWS Series 5114 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH 2-56 - 014 - 015 2-56X3/16 2-56X1/4 - 036 - 038 - 039 - 040 - 041 - 043 - 045 - 046 - 047 4-40X1/8 4-40X3/16 4-40X1/4 4-40X5/16 4-40X3/8 4-40X1/2 4-40X3/4 4-40X7/8 4-40X1 PKG KG KG CPASE QTY TY QQ TYTY 8-32 100 100 7500 7500 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 7500 7500 4-40 - 132 - 133 - 134 - 135 - 137 - 138 - 139 - 140 - 141 - 143 - 145 - 148 - 150 8-32X3/16 8-32X1/4 8-32X5/16 8-32X3/8 8-32X1/2 8-32X5/8 8-32X3/4 8-32X7/8 8-32X1 8X32X1 1/4 8-32X1 1/2 8-32X2 8-32X2 1/2 100 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 4500 4500 4500 3000 2000 2000 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 7500 7500 7500 7500 4500 4500 4500 3000 3000 2000 2000 2000 1600 800 400 10-24 6-32 - 082 - 083 - 084 - 085 - 087 - 088 - 089 - 090 - 091 - 093 - 095 - 098 6-32X3/16 6-32X1/4 6-32X5/16 6-32X3/8 6-32X1/2 6-32X5/8 6-32X3/4 6-32X7/8 6-32X1 6-32X1 1/4 6-32X1 1/2 6-32X2 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 4500 4500 4500 4500 3500 - 185 - 186 - 187 - 189 - 190 - 191 - 192 - 193 - 195 - 197 - 199 - 200 - 202 - 204 - 206 10-24X1/4 10-24X5/16 10-24X3/8 10-24X1/2 10-24X5/8 10-24X3/4 10-24X7/8 10-24X1 10-24X1 1/4 10-24X1 1/2 10-24X1 3/4 10-24X2 10-24X2 1/2 10-24X3 10-24X3 1/2 Note: Please use Series and Size No. when ordering: Example: 2-56 x 3/16 18.8 Stainless Steel Pan Head Phillips Machine Screws Series Size No. 5114 -014 NA36 January, 2009 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel PAN HEAD PHILLIPS MACHINE SCREWS Series 5114 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH ENGTH x LENGTH QTY 10-32 - 213 - 214 - 215 - 217 - 218 - 219 - 220 - 221 - 223 - 225 - 227 - 228 - 230 10-32X1/4 10-32X5/16 10-32X3/8 10-32X1/2 10-32X5/8 10-32X3/4 10-32X7/8 10-32X1 10-32X1 1/4 10-32X1 1/2 10-32X1 3/4 10-32X2 10-32X2 1/2 PKG KG KG CPASE QTY QQ TYTY 1/4-20 100 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 4500 4500 4500 3000 3000 2000 2000 2000 1600 - 303 - 305 - 306 - 307 - 308 - 309 - 311 - 313 - 315 - 316 - 318 - 320 - 322 - 324 1/4-20X3/8 1/4-20X1/2 1/4-20X5/8 1/4-20X3/4 1/4-20X7/8 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2 1/4-20X1 3/4 1/4-20X2 1/4-20X2 1/2 1/4-20X3 1/4-20X3 1/2 1/4-20X4 Note: Please use Series and Size No. when ordering: Example: 10-32 x 1/4 18.8 Stainless Steel Pan Head Phillips Machine Screws Series Size No. 5114 -213 100 100 100 100 100 100 100 100 100 100 100 100 50 50 4500 3000 3000 3000 2000 2000 2000 1600 1600 1200 800 600 400 400 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA37 18.8 Stainless Steel TRUSS HEAD PHILLIPS MACHINE SCREWS Series 5115 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH 6-32 - 083 - 084 - 085 - 087 - 089 - 091 6-32X1/4 6-32X5/16 6-32X3/8 6-32X1/2 6-32X3/4 6-32X1 - 133 - 134 - 135 - 137 - 138 - 139 - 141 - 143 - 145 - 148 8-32X1/4 8-32X5/16 8-32X3/8 8-32X1/2 8-32X5/8 8-32X3/4 8-32X1 8-32X1 1/4 8-32X1 1/2 8-32X2 10-32 100 100 100 100 100 100 7500 7500 7500 7500 7500 4500 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 4500 4500 4500 3000 3000 2000 100 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 4500 3000 3000 2000 8-32 10-24 - 185 - 186 - 187 - 189 - 190 - 191 - 193 - 195 - 197 10-24X1/4 10-24X5/16 10-24X3/8 10-24X1/2 10-24X5/8 10-24X3/4 10-24X1 10-24X1 1/4 10-24X1 1/2 - 213 - 215 - 217 - 218 - 219 - 221 - 223 - 225 10-32X1/4 10-32X3/8 10-32X1/2 10-32X5/8 10-32X3/4 10-32X1 10-32X1 1/4 10-32X1 1/2 - 303 - 305 - 306 - 307 - 308 - 309 - 311 - 313 - 316 1/4-20X3/8 1/4-20X1/2 1/4-20X5/8 1/4-20X3/4 1/4-20X7/8 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2 1/4-20X2 January, 2009 100 100 100 100 100 100 100 100 7500 7500 4500 4500 3000 3000 3000 2000 100 100 100 100 100 100 100 100 100 3000 3000 3000 2000 2000 2000 1600 1600 800 1/4-20 Note: Please use Series and Size No. when ordering: Example: 6-32 x 1/4 18.8 Stainless Steel Truss Head Phillips Machine Screws Series Size No. 5115 -083 NA38 PKG KG KG CPASE QTY QQ TYTY Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 305 Stainless Steel FLAT HEAD SOCKET DECK SCREWS Series 5140 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO No.8 Diameter - 533 - 537 - 538 8X2 8X2 1/2 8X3 D DIAMETER IAMETER DIAMETER PKG xx L LENGTH ENGTH ENGTH x LENGTH QTY PKG KG KG CPASE QTY TY QQ TYTY No.10 Diameter 100 100 100 800 800 800 - 540 Note: Please use Series and Size No. when ordering: Example: 8 x 2 305 Stainless Steel Flat Head Square Socket Deck Screws Series Size No. 5140 -533 10X3 1/2 100 800 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2010 January, 2009 NA39R 18.8 Stainless Steel OVAL HEAD SLOT TAPPING SCREWS Series 5157 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO No.4 Diameter - 043 4X1/2 - 089 - 091 - 093 - 095 6X3/4 6X1 6X1 1/4 6X1 1/2 - 135 - 137 - 139 - 141 - 143 - 145 8X3/8 8X1/2 8X3/4 8X1 8X1 1/4 8X1 1/2 7500 100 100 100 100 7500 7500 7500 7500 100 100 100 100 100 100 7500 7500 4500 4500 3000 3000 - 189 - 191 - 193 - 195 - 197 - 200 10X1/2 10X3/4 10X1 10X1 1/4 10X1 1/2 10X2 100 100 100 100 100 100 7500 7500 4500 4500 3000 2000 100 100 3000 2000 No.12 Diameter No.8 Diameter - 250 - 252 Note: Please use Series and Size No. when ordering: Example: 4 x 1/2 18.8 Stainless Steel Oval Head Slot Tapping Screws Series Size No. 7 -043 5157 January, 2009 PKG KG KG CPASE QTY QQ TYTY No.10 Diameter 100 No.6 Diameter NA40 DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH 12X1 12X1 1/4 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel PAN HEAD SLOT TAPPING SCREWS Series 5158 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO No.4 Diameter - 039 - 043 - 045 4X1/4 4X1/2 4X3/4 - 083 - 085 - 087 - 088 - 089 - 091 - 093 - 095 6X1/4 6X3/8 6X1/2 6X5/8 6X3/4 6X1 6X1 1/4 6X1 1/2 - 133 - 135 - 137 - 138 - 139 - 141 - 143 - 145 - 148 8X1/4 8X3/8 8X1/2 8X5/8 8X3/4 8X1 8X1 1/4 8X1 1/2 8X2 DIAMETER IAMETER DIAMETER PKG D IAMETER LENGTH ENGTH x LENGTH QTY xx L ENGTH PKG KG CPASE QTY TY QQ TYTY No.10 Diameter 100 100 100 7500 7500 7500 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 4500 4500 4500 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 4500 4500 3000 2000 No.6 Diameter No.8 Diameter - 189 - 190 - 191 - 193 - 195 - 197 10X1/2 10X5/8 10X3/4 10X1 10X1 1/4 10X1 1/2 - 246 - 248 - 250 - 252 - 254 - 256 - 257 12X1/2 12X3/4 12X1 12X1 1/4 12X1 1/2 12X1 3/4 12X2 - 277 - 280 - 282 - 284 - 287 14X3/4 14X1 14X1 1/4 14X1 1/2 14X2 100 100 100 100 100 100 7500 7500 7500 3000 2000 2000 100 100 100 100 100 100 100 4500 4500 3000 2000 2000 2000 1600 100 100 100 100 100 3000 2000 2000 1600 1200 No.12 Diameter No.14 Diameter Note: Please use Series and Size No. when ordering: Example: 4 x 1/4 18.8 Stainless Steel Pan Head Slot Tapping Screws Series Size No. 5158 -039 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA41 18.8 Stainless Steel FLAT HEAD SOCKET TAPPING SCREWS Series 5162 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO No.4 Diameter - 040 - 041 - 043 - 044 - 045 - 046 - 047 4X5/16 4X3/8 4X1/2 4X5/8 4X3/4 4X7/8 4X1 - 084 - 085 - 087 - 088 - 089 - 090 - 091 - 093 - 095 - 097 - 098 6X5/16 6X3/8 6X1/2 6X5/8 6X3/4 6X7/8 6X1 6X1 1/4 6X1 1/2 6X1 3/4 6X2 - 135 - 137 - 138 - 139 - 140 - 141 - 143 - 145 - 147 - 148 - 150 - 152 - 154 8X3/8 8X1/2 8X5/8 8X3/4 8X7/8 8X1 8X1 1/4 8X1 1/2 8X1 3/4 8X2 8X2 1/2 8X3 8X3 1/2 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 4500 4500 3000 3000 100 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 4500 4500 4500 3000 3000 2000 1600 1200 1200 No.8 Diameter - 187 - 189 - 190 - 191 - 192 - 193 - 195 - 197 - 199 - 200 - 202 - 204 - 206 10X3/8 10X1/2 10X5/8 10X3/4 10X7/8 10X1 10X1 1/4 10X1 1/2 10X1 3/4 10X2 10X2 1/2 10X3 10X3 1/2 - 246 - 248 - 250 - 252 - 254 - 256 - 257 - 259 - 261 - 263 12X1/2 12X3/4 12X1 12X1 1/4 12X1 1/2 12X1 3/4 12X2 12X2 1/2 12X3 12X3 1/2 - 278 - 280 - 282 - 284 - 286 - 287 - 289 - 291 - 293 14X3/4 14X1 14X1 1/4 14X1 1/2 14X1 3/4 14X2 14X2 1/2 14X3 14X3 1/2 100 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 4500 3000 2000 2000 1600 1600 800 600 100 100 100 100 100 100 100 100 100 100 4500 4500 3000 3000 2000 2000 1600 1200 800 800 100 100 100 100 100 100 100 100 100 4500 2000 1000 2000 1600 1600 800 600 600 No.12 Diameter No.14 Diameter Note: Please use Series and Size No. when ordering: Example: 4 x 5/16 18.8 Stainless Steel Flat Head Socket Tapping Screws Series Size No. 5162 -040 January, 2009 PKG KG KG CPASE QTY QQ TYTY No.10 Diameter No.6 Diameter NA42 D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH ENGTH x LENGTH QTY Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel PAN HEAD SOCKET TAPPING SCREWS Series 5163 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO No.4 Diameter - 040 - 041 - 043 - 044 - 045 - 047 4X5/16 4X3/8 4X1/2 4X5/8 4X3/4 4X1 - 084 - 085 - 087 - 088 - 089 - 090 - 091 - 093 - 095 - 097 - 098 6X5/16 6X3/8 6X1/2 6X5/8 6X3/4 6X7/8 6X1 6X1 1/4 6X1 1/2 6X1 3/4 6X2 - 135 - 137 - 138 - 139 - 140 - 141 - 143 - 145 - 147 - 148 - 150 - 152 8X3/8 8X1/2 8X5/8 8X3/4 8X7/8 8X1 8X1 1/4 8X1 1/2 8X1 3/4 8X2 8X2 1/2 8X3 DIAMETER IAMETER DIAMETER PKG D IAMETER LENGTH ENGTH x LENGTH QTY xx L ENGTH PKG KG CPASE QTY TY QQ TYTY No.10 Diameter 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 4500 4500 3000 3000 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 4500 3000 3000 2000 2000 1600 800 No.6 Diameter No.8 Diameter - 187 - 189 - 190 - 191 - 192 - 193 - 195 - 197 - 199 - 200 - 202 - 204 - 206 10X3/8 10X1/2 10X5/8 10X3/4 10X7/8 10X1 10X1 1/4 10X1 1/2 10X1 3/4 10X2 10X2 1/2 10X3 10X3 1/2 - 246 - 248 - 250 - 252 - 254 - 257 - 259 12X1/2 12X3/4 12X1 12X1 1/4 12X1 1/2 12X2 12X2 1/2 - 276 - 278 - 280 - 282 - 284 - 286 - 287 - 289 - 291 14X1/2 14X3/4 14X1 14X1 1/4 14X1 1/2 14X1 3/4 14X2 14X2 1/2 14X3 100 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 4500 4500 4500 3000 3000 2000 2000 1600 1600 800 800 100 100 100 100 100 100 100 4500 4500 3000 2000 2000 1600 1200 100 100 100 100 100 100 100 100 100 3000 3000 2000 2000 1600 1600 1200 1200 600 No.12 Diameter No.14 Diameter Note: Please use Series and Size No. when ordering: Example: 4 x 5/16 18.8 Stainless Steel Pan Head Socket Tapping Screws Series Size No. 5163 -040 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA43 18.8 Stainless Steel TRUSS HEAD SOCKET TAPPING SCREWS Series 5164 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO No.4 Diameter - 043 - 045 4X1/2 4X3/4 - 085 - 087 - 088 - 089 - 090 - 091 - 093 - 095 6X3/8 6X1/2 6X5/8 6X3/4 6X7/8 6X1 6X1 1/4 6X1 1/2 100 100 7500 7500 100 100 100 100 100 100 100 100 7500 7500 7500 7500 4500 4500 4500 4500 No.8 Diameter 8X3/8 8X1/2 8X5/8 8X3/4 8X7/8 8X1 8X1 1/4 8X1 1/2 8X2 100 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 4500 3500 3000 2000 - 187 - 189 - 190 - 191 - 192 - 193 - 195 - 197 - 199 - 200 - 202 - 204 10X3/8 10X1/2 10X5/8 10X3/4 10X7/8 10X1 10X1 1/4 10X1 1/2 10X1 3/4 10X2 10X2 1/2 10X3 - 248 - 250 - 252 - 254 - 257 12X3/4 12X1 12X1 1/4 12X1 1/2 12X2 - 278 - 280 - 282 - 284 - 287 14X3/4 14X1 14X1 1/4 14X1 1/2 14X2 January, 2009 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 4500 4500 4500 3000 3000 2000 2000 1600 800 800 100 100 100 100 100 3000 3000 2000 2000 1600 100 100 100 100 100 3000 2000 2000 1600 1600 No.12 Diameter No.14 Diameter Note: Please use Series and Size No. when ordering: Example: 4 x 1/2 18.8 Stainless Steel Truss Head Socket Tapping Screws Series Size No. 5164 -043 NA44 PKG KG KG CPASE QTY QQ TYTY No.10 Diameter No.6 Diameter - 135 - 137 - 138 - 139 - 140 - 141 - 143 - 145 - 148 D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH ENGTH x LENGTH QTY Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel OVAL HEAD SOCKET TAPPING SCREWS Series 5165 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO No.4 Diameter - 043 - 045 - 047 4X1/2 4X3/4 4X1 - 085 - 087 - 088 - 089 - 091 - 093 - 095 6X3/8 6X1/2 6X5/8 6X3/4 6X1 6X1 1/4 6X1 1/2 DIAMETER IAMETER DIAMETER PKG D IAMETER LENGTH ENGTH x LENGTH QTY xx L ENGTH PKG KG CPASE QTY TY QQ TYTY No.10 Diameter 100 100 100 7500 7500 7500 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 4500 4500 No.6 Diameter - 187 - 189 - 190 - 191 - 192 - 193 - 195 - 197 - 199 - 200 - 202 - 204 10X3/8 10X1/2 10X5/8 10X3/4 10X7/8 10X1 10X1 1/4 10X1 1/2 10X1 3/4 10X2 10X2 1/2 10X3 - 248 - 250 - 252 - 254 - 257 12X3/4 12X1 12X1 1/4 12X1 1/2 12X2 - 278 - 280 - 282 - 284 - 287 14X3/4 14X1 14X1 1/4 14X1 1/2 14X2 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 4500 3000 3000 2000 2000 1600 1600 100 100 100 100 100 4500 3000 2000 2000 1600 100 100 100 100 100 4500 3000 2000 2000 1600 No.12 Diameter No.8 Diameter - 135 - 137 - 138 - 139 - 140 - 141 - 143 - 145 - 147 - 148 8X3/8 8X1/2 8X5/8 8X3/4 8X7/8 8X1 8X1 1/4 8X1 1/2 8X1 3/4 8X2 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 4500 4500 3000 2000 2000 No.14 Diameter Note: Please use Series and Size No. when ordering: Example: 4 x 1/2 18.8 Stainless Steel Oval Head Socket Tapping Screws Series Size No. 5165 -043 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA45 18.8 Stainless Steel FLAT HEAD PHILLIPS TAPPING SCREWS Series 5168 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO No.4 Diameter - 039 - 040 - 041 - 043 - 044 - 045 - 047 4X1/4 4X5/16 4X3/8 4X1/2 4X5/8 4X3/4 4X1 - 083 - 085 - 087 - 088 - 089 - 090 - 091 - 093 - 095 - 098 6X1/4 6X3/8 6X1/2 6X5/8 6X3/4 6X7/8 6X1 6X1 1/4 6X1 1/2 6X2 - 133 - 135 - 137 - 138 - 139 - 140 - 141 - 143 - 145 - 147 - 148 8X1/4 8X3/8 8X1/2 8X5/8 8X3/4 8X7/8 8X1 8X1 1/4 8X1 1/2 8X1 3/4 8X2 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 4500 4500 3000 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 4500 4500 3000 3000 2000 2000 No.8 Diameter - 187 - 189 - 190 - 191 - 192 - 193 - 195 - 197 - 199 - 200 - 202 - 204 10X3/8 10X1/2 10X5/8 10X3/4 10X7/8 10X1 10X1 1/4 10X1 1/2 10X1 3/4 10X2 10X2 1/2 10X3 - 248 - 250 - 252 - 254 - 256 - 257 - 259 - 261 12X3/4 12X1 12X1 1/4 12X1 1/2 12X1 3/4 12X2 12X2 1/2 12X3 - 276 - 278 - 280 - 282 - 284 - 287 - 289 14X1/2 14X3/4 14X1 14X1 1/4 14X1 1/2 14X2 14X2 1/2 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 4500 3000 2000 2000 2000 1600 1600 100 100 100 100 100 100 100 100 4500 4500 3000 2000 1600 1600 1600 1600 100 100 100 100 100 100 100 4500 4500 3000 2000 2000 1600 1200 No.12 Diameter No.14 Diameter Note: Please use Series and Size No. when ordering: Example: 4 x 1/4 18.8 Stainless Steel Flat Head Phillips Tapping Screws Series Size No. 5168 -039 January, 2009 PKG KG KG CPASE QTY QQ TYTY No.10 Diameter No.6 Diameter NA46 DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel OVAL HEAD PHILLIPS TAPPING SCREWS Series 5170 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO No.4 Diameter - 041 - 043 - 045 - 047 4X3/8 4X1/2 4X3/4 4X1 6X3/8 6X1/2 6X5/8 6X3/4 6X1 6X1 1/4 6X1 1/2 PKG KG CPASE QTY TY QQ TYTY No.10 Diameter 100 100 100 100 7500 7500 7500 7500 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 4500 4500 No.6 Diameter - 085 - 087 - 088 - 089 - 091 - 093 - 095 DIAMETER IAMETER DIAMETER PKG D IAMETER LENGTH ENGTH x LENGTH QTY xx L ENGTH - 187 - 189 - 190 - 191 - 193 - 195 - 197 - 199 - 200 - 202 - 204 10X3/8 10X1/2 10X5/8 10X3/4 10X1 10X1 1/4 10X1 1/2 10X1 3/4 10X2 10X2 1/2 10X3 - 250 - 252 - 254 - 257 - 259 12X1 12X1 1/4 12X1 1/2 12X2 12X2 1/2 - 280 - 282 - 284 - 287 14X1 14X1 1/4 14X1 1/2 14X2 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 4500 3000 3000 2000 2000 2000 800 100 100 100 100 100 3000 2000 2000 1600 1200 100 100 100 100 3000 3000 2000 1600 No.12 Diameter No.8 Diameter - 135 - 137 - 138 - 139 - 140 - 141 - 143 - 145 - 148 8X3/8 8X1/2 8X5/8 8X3/4 8X7/8 8X1 8X1 1/4 8X1 1/2 8X2 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 4500 4500 4500 3000 2000 No.14 Diameter Note: Please use Series and Size No. when ordering: Example: 4 x 3/8 18.8 Stainless Steel Oval Head Phillips Tapping Screws Series Size No. 5170 -041 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA47 18.8 Stainless Steel PAN HEAD PHILLIPS TAPPING SCREWS Series 5171 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO No.4 Diameter - 039 - 041 - 043 - 044 - 045 - 046 - 047 4X1/4 4X3/8 4X1/2 4X5/8 4X3/4 4X7/8 4X1 - 083 - 085 - 087 - 088 - 089 - 090 - 091 - 093 - 095 6X1/4 6X3/8 6X1/2 6X5/8 6X3/4 6X7/8 6X1 6X1 1/4 6X1 1/2 - 135 - 137 - 138 - 139 - 140 - 141 - 143 - 145 - 147 - 148 8X3/8 8X1/2 8X5/8 8X3/4 8X7/8 8X1 8X1 1/4 8X1 1/2 8X1 3/4 8X2 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 4500 4500 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 4500 3000 3000 2000 2000 No.8 Diameter - 187 - 189 - 190 - 191 - 192 - 193 - 195 - 197 - 199 - 200 - 202 - 204 10X3/8 10X1/2 10X5/8 10X3/4 10X7/8 10X1 10X1 1/4 10X1 1/2 10X1 3/4 10X2 10X2 1/2 10X3 - 246 - 248 - 250 - 252 - 254 - 257 12X1/2 12X3/4 12X1 12X1 1/4 12X1 1/2 12X2 - 276 - 278 - 279 - 280 - 282 - 284 - 287 - 289 14X1/2 14X3/4 14X7/8 14X1 14X1 1/4 14X1 1/2 14X2 14X2 1/2 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 4500 4500 4500 3000 3000 2000 2000 1600 1600 800 100 100 100 100 100 100 4500 4500 3000 2000 2000 1600 100 100 100 100 100 100 100 100 3000 3000 3000 2000 2000 1600 1600 1200 No.12 Diameter No.14 Diameter Note: Please use Series and Size No. when ordering: Example: 4 x 1/4 18.8 Stainless Steel Pan Head Phillips Tapping Screws Series Size No. 5171 -039 January, 2009 PKG KG CPASE QTY TY QQ TYTY No.10 Diameter No.6 Diameter NA48 DIAMETER IAMETER DIAMETER PKG D LENGTH ENGTH x LENGTH QTY xx L ENGTH Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel Series 5172 SS IZE IZE NN OO TRUSS HEAD PHILLIPS TAPPING SCREWS D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO No.4 Diameter - 043 - 045 4X1/2 4X3/4 6X3/8 6X1/2 6X5/8 6X3/4 6X1 - 135 - 137 - 138 - 139 - 140 - 141 - 143 - 145 - 147 8X3/8 8X1/2 8X5/8 8X3/4 8X7/8 8X1 8X1 1/4 8X1 1/2 8X1 3/4 7500 7500 100 100 100 100 100 7500 7500 7500 7500 7500 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 3000 4500 3000 3000 2000 No.8 Diameter - 187 - 189 - 190 - 191 - 192 - 193 - 195 - 197 - 200 10X3/8 10X1/2 10X5/8 10X3/4 10X7/8 10X1 10X1 1/4 10X1 1/2 10X2 100 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 3000 3000 2000 2000 100 100 100 100 2000 2000 2000 2000 No.14 Diameter - 278 - 280 - 282 - 284 Note: Please use Series and Size No. when ordering: Example: 4 x 1/2 18.8 Stainless Steel Truss Head Phillips Tapping Screws Series Size No. 5172 -043 14X3/4 14X1 14X1 1/4 14X1 1/2 Stock Sizes are shown in HEAVY type. 18.8 Stainless Steel Series 5175 SS IZE IZE NN OO PKG KG KG CPASE QTY TY QQ TYTY No.10 Diameter 100 100 No.6 Diameter - 085 - 087 - 088 - 089 - 091 D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH ENGTH x LENGTH QTY HEX SLOTTED WASHER HEAD TAPPING SCREWS D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON OO 6x1/2 6x3/4 6x1 6x1-1/4 6x1-1/2 - 138 - 139 - 141 - 148 8x5/8 8x3/4 8x1 8x2 PKG KG KG CPASE QTY TY QQ TYTY No.10 Diameter No.6 Diameter - 087 - 089 - 091 - 093 - 095 D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH x LENGTH QTY 100 100 100 100 100 7500 7500 7500 7500 7500 No.8 Diameter 100 100 100 100 7500 4500 4500 2000 - 189 - 190 - 191 - 193 - 195 - 200 10X1/2 10x5/8 10X3/4 10X1 10x1-1/4 10x2 - 278 - 280 - 282 - 284 14X3/4 14X1 14X1 1/4 14X1 1/2 100 100 100 100 100 100 4500 4500 4500 3000 3000 1200 100 100 100 100 2000 2000 1600 1600 No.14 Diameter Note: Please use Series and Size No. when ordering: Stock Sizes are shown in HEAVY type. Example: 6 x 1/2 18.8 Stainless Steel Hex Slotted Washer Head Tapping Screws Series Size No. 5175 -087 H. Paulin & Co. Limited January, 2009 NA49 410 Stainless Steel PAN SOCKET HEAD DRILL X SCREWS Series 5176 PS ART IZE NN OO - 030 - 031 - 032 - 033 - 034 - 035 - 040 - 036 - 037 - 038 - 039 - 044 D DIAMETER IAMETER xx LLENGTH ENGTH 6 x 3/8 6 x 1/2 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 1-1/4 8 x 1-1/2 10 x 1/2 10 x 5/8 10 x 3/4 10 x 1 PKG QTY 100 100 100 100 100 100 100 100 100 100 100 100 KG CP ASE QQ TYTY 7500 7500 7500 7500 4500 4500 3600 3000 7500 4500 4500 3000 PS ART SIZE IZE NN ON OO - 045 - 046 - 053 - 054 - 063 - 064 - 065 - 066 - 067 Note: Please use Series and Size No. when ordering: Example: 6 x 3/8 410 Stainless Steel Pan Socket Head Drill X Screws Series Size No. 5176 -030 D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH x LENGTH QTY 10 x 1-1/4 10 x 1-1/2 12 x 3/4 12 x 1 14 x 3/4 14 x 1 14 x 1-1/4 14 x 1-1/2 14 x 2 100 100 100 100 100 100 100 100 100 PKG KG KG CPASE QTY TY QQ TYTY 3000 2000 3000 2000 2000 2000 1600 1600 600 Stock Sizes are shown in HEAVY type. 410 Stainless Steel INDENTED HEX HEAD DRILL X SCREWS Series 5177 PS ART IZE NN OO - 069 - 070 - 071 - 072 - 073 - 074 - 075 - 076 - 078 - 079 - 080 - 082 D DIAMETER IAMETER xx LLENGTH ENGTH 6 x 3/8 6 x 1/2 8 x 1/2 8 x 5/8 8 x 3/4 8x1 8 x 1-1/4 8 x 1-1/2 10 x 1/2 10 x 5/8 10 x 3/4 10 x 1 PKG QTY 100 100 100 100 100 100 100 100 100 100 100 100 KG CP ASE QQ TYTY 7500 7500 7500 7500 4500 4500 3000 3000 4500 4500 4500 3000 PS ART SIZE IZE IZE NN ON O OO - 083 - 084 - 086 - 087 - 092 - 093 - 094 - 095 - 097 Note: Please use Series and Size No. when ordering: Example: 6 x 3/8 410 Stainless Steel Indented Hex Head Drill X Screws Series Size No. 5177 -069 NA50 January, 2009 D DIAMETER IAMETER DIAMETER PKG xx L LENGTH ENGTH ENGTH x LENGTH QTY 10 x 1-1/4 10 x 1-1/2 12 x 3/4 12 x 1 14 x 3/4 14 x 1 14 x 1-1/4 14 x 1-1/2 14 x 2 100 100 100 100 100 100 100 100 100 PKG KG KG CPASE QTY Q TY QTYTY 3000 2000 3000 2000 2000 2000 1600 1600 1200 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 430 Stainless Steel PAN SOCKET HEAD TAPPING SCREWS Series 5363 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH No. 6 - 085 - 087 - 088 - 089 - 091 - 095 6x3/8 6x1/2 6x5/8 6x3/4 6x1 6x1-1/2 PKG KG KG CPASE QTY TY QQ TYTY No.8 100 100 100 100 100 100 7500 7500 7500 7500 4500 3000 - 137 - 139 - 141 - 145 Note: Please use Series and Size No. when ordering: Example: 6 x 1 430 Stainless Steel Pan Socket Head Tapping Screws Series Size No. 5363 -091 8x1/2 8x3/4 8x1 8x1-1/2 100 100 100 100 7500 4500 4500 3000 Stock Sizes are shown in HEAVY type. 410 Stainless Steel PAN PHILLIPS DRILL X SCREWS Series 5365 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH ENGTH x LENGTH QTY No. 6 - 087 - 089 - 091 6x1/2 6x3/4 6x1 - 137 - 138 - 139 - 141 - 145 8x1/2 8x5/8 8x3/4 8x1 8x1-1/2 PKG KG KG CPASE QTY TY QQ TYTY No.10 100 100 100 7500 7500 7500 100 100 100 100 100 7500 7500 7500 4500 3000 No. 8 Note: Please use Series and Size No. when ordering: Example: 6 x 1/2 410 Stainless Steel Pan Phillips Drill X Screws Series Size No. 5365 -087 - 189 - 191 - 193 - 197 10x1/2 10x3/4 10x1 10x1-1/2 100 100 100 100 7500 4500 4500 2000 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA51 18.8 Stainless Steel Series 5195 RIVETS DOMED HEAD HOW TO MEASURE RIVETS Recommended Hole Sizes Rivet Diameter Inch Metric 3/32 2.4mm 1/8 3.2mm 5/32 4.0mm 3/16 4.8mm Drill Number Size #41 .096 - .100 #30 .129 - .133 #20 .160 - .164 #11 .192 - .196 Max. Grip Max. Grip 1/8 3/16 1/4 3/8 1/8 3/16 1/4 3/8 1/2 1/2 Max. Grip 1/8 1/4 3/8 1/2 DOMED HEAD COUNTER SUNK LARGE FLANGE Stainless Rivet - Stainless Mandrel SIZESIZE R IVET DIAMETER G RIP NO NODIAMETER x LENGTH RANGE 1/8 1/8 1/8 1/8 1/8 3/16 3/16 3/16 3/16 1/16-1/8 1/8-3/16 3/16-1/4 5/16-3/8 3/8-1/2 1/16-1/8 1/8-1/4 1/4-3/8 3/8-1/2 Series 5181 - 190 - 193 - 305 - 307 HEAD TYPE KG RIVET PPKG Q TY Q LENGTH TY Domed Domed Domed Domed Domed Domed Domed Domed Domed 0.232 0.294 0.357 0.481 0.625 0.277 0.402 0.527 0.652 100 100 100 100 100 100 100 100 100 Stainless Rivet - Steel Mandrel SIZESIZE R IVET DIAMETER G RIP x LENGTH NO NODIAMETER RANGE - 111 - 114 - 117 - 123 - 126 - 150 - 153 - 156 - 159 1/8 1/8 1/8 1/8 1/8 3/16 3/16 3/16 3/16 D DIAMETER IAMETER xx LLENGTH ENGTH 3/16X5/8 3/16X1 1/4X3/4 1/4X1 January, 2009 1/16-1/8 1/8-3/16 3/16-1/4 5/16-3/8 3/8-1/2 1/16-1/8 1/8-1/4 1/4-3/8 3/8-1/2 HEAD TYPE KG KG R IVET PP TYTY L ENGTH QQ Domed Domed Domed Domed Domed Domed Domed Domed Domed 0.232 0.294 0.357 0.481 0.625 0.277 0.402 0.527 0.652 100 100 100 100 100 100 100 100 100 Stock Sizes are shown in HEAVY type. 18.8 Stainless Steel CLEVIS PINS PKG QTY KG CP ASE QQ TYTY 6 6 6 6 600 450 450 450 Note: Please use Series and Size No. when ordering: Example: 3/16 x 5/8 18.8 Stainless Steel Clevis Pins Series Size No. 5181 -190 NA52 3/16” Dia. Rivet Length measure to end of rivet body. Note: Please use Series and Size No. when ordering: Example: 1/8 18.8 Stainless Steel Rivets Domed Head Series Size No. 5195 -211 SS IZE IZE NN OO 3/4 5/32” Dia. Max. Grip Rivet Length - 211 - 214 - 217 - 223 - 226 - 250 - 253 - 256 - 259 1/8” Dia. L 5/8 SSIZE SIZE IZE IZE NN ON O OO - 440 - 444 - 448 - 496 LENGTH D DIAMETER IAMETER IAMETER DIAMETER PKG xx L LENGTH ENGTH ENGTH x LENGTH QTY 5/16X3/4 5/16X1 5/16X1 1/2 3/8X2 PKG KG KG CPASE QTY TY QQ TYTY 6 6 6 6 450 450 450 270 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel Series 5198 'S' HOOKS SIZE OVERALL DIAMETEREYE SIZE x LENGTH NONO LENGTH DIAMETER - 036 - 037 1-1/2" 2" .433 .551 W IRE DIAMETER PKG KG P QTY TY Q .169 .236 SIZE SIZE OVERALL DIAMETEREYE NONO LENGTH x LENGTHDIAMETER - 038 - 039 5 5 2-1/2" 3" Note: Please use Series and Size No. when ordering: Example: 1-1/2" 18.8 Stainless Steel S Hooks Series Size No. 5198 -036 5198 DIAMETER OVERALL x LENGTH LENGTH 053 055 057 058 1 - 1 /2 " 2" 2 - 1 /2 " 3" THREAD PKG LENGTH QTY I.D EYE .6 3 0 .8 6 6 1 .1 0 1 .2 6 WIRE DIAMETER .4 7 2 .6 3 0 .7 4 8 .8 2 7 PKG QTY .1 5 7 .2 3 6 .2 8 3 .2 9 9 5 5 5 5 Stock Sizes are shown in HEAVY type. 18.8 Stainless Steel Series 5198 071 072 073 075 5 5 Stock Sizes are shown in HEAVY type. Note: Please use Series and Size No. when ordering: Example: 1-1/2" 18.8 Stainless Steel Screw Eyes Series Size No. 5198 -053 - .299 .299 SCREW EYES SSIZE IZE NNOO SIZE SIZE NONO .748 .787 18.8 Stainless Steel Series - PKG W IRE DIAMETER QTY LAG SCREW EYES DIAMETER THREAD x LENGTH DIAMETER 1 /4 " 1 /4 " 5 /1 6 " 3 /8 " OVERALL LENGTH 3 - 3 /4 " 5" 4" 4 - 1 /2 " PKG QTY THREAD LENGTH 1 .2 6 2 .0 1 2 .0 1 2 .0 1 Note: Please use Series and Size No. when ordering: Example: 1/4 x 3-3/4 18.8 Stainless Steel Lag Screw Eyes Series Size No. 5198 -071 I.D EYE WIRE DIAMETER .5 5 1 .5 5 1 .6 3 0 .7 4 8 .1 9 1 .1 9 1 .2 4 8 .2 9 9 PKG QTY 5 5 5 5 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA53 18.8 Stainless Steel Series 5198 SIZE SIZE NONO - EYE BOLTS WITH NUTS DIAMETER THREAD x LENGTH DIAMETER 101 102 105 106 107 108 112 113 114 118 119 120 121 3 /1 6 3 /1 6 1 /4 - 2 0 1 /4 - 2 0 1 /4 - 2 0 1 /4 - 2 0 5 /1 6 - 1 8 5 /1 6 - 1 8 5 /1 6 - 1 8 3 /8 - 1 6 3 /8 - 1 6 3 /8 - 1 6 3 /8 - 1 6 OVERALL LENGTH 1 - 1 /2 " 2" 2" 2 - 1 /2 " 3" 4" 3 - 1 /4 " 4" 5" 4" 5" 6" 8" PKG THREAD QTY LENGTH .7 8 7 .9 8 4 .8 6 6 1 .3 8 1 .5 5 2 .3 6 1 .7 3 2 .2 4 2 .9 9 2 .0 1 2 .9 9 2 .9 9 2 .9 9 I.D EYE WIRE DIAMETER .3 9 4 .3 9 4 .5 5 1 .5 5 1 .5 5 1 .5 5 1 .7 4 8 .7 4 8 .7 4 8 .9 8 4 .9 8 4 .9 8 4 .9 8 4 .1 5 7 .1 5 7 .2 1 3 .2 1 3 .2 1 3 .2 1 3 .2 7 2 .2 7 2 .2 7 2 .3 3 1 .3 3 1 .3 3 1 .3 3 1 Note: Please use Series and Size No. when ordering: Example: 3/16 x 1-1/2 18.8 Stainless Steel Eye Bolts with Nuts Series Size No. 5198 -101 SSIZE IZE NNOO - 206 207 210 211 219 220 221 Stock Sizes are shown in HEAVY type. U BOLTS WITH PLATE & NUTS DIAMETER THREAD x LENGTH DIAMETER 1 /4 - 2 0 1 /4 - 2 0 1 /4 - 2 0 5 /1 6 - 1 8 5 /1 6 - 1 8 5 /1 6 - 1 8 5 /1 6 - 1 8 OVERALL LENGTH 2 - 1 /2 " 2 - 1 /4 " 3 - 1 /2 " 2 - 1 /2 " 4 - 1 /4 " 4 - 1 /2 " 5" PKG THREAD QTY LENGTH 1 .1 0 1 .1 0 1 .1 0 1 .3 8 1 .7 3 2 .0 1 2 .0 1 Note: Please use Series and Size No. when ordering: Example: 1/4-20 x 2-1/2 18.8 Stainless Steel U Bolts with Plate & Nuts Series Size No. 5198 -206 NA54 5 5 5 5 5 5 5 5 5 5 5 5 5 18.8 Stainless Steel Series 5198 PKG QTY January, 2009 I.D EYE WIRE DIAMETER .9 8 4 1 .2 6 0 2 .7 5 6 1 .2 2 0 2 .5 2 0 2 .7 5 6 3 .7 4 0 .2 1 3 .2 1 3 .2 1 3 .2 7 2 .2 7 2 .2 7 2 .2 7 2 PKG QTY 5 5 5 5 5 5 5 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel Series 5198 TURNBUCKLES HOOK AND EYE SIZE SIZE THREAD DIAMETER OVERALL NONO DIAMETER x LENGTH LENGTH - 301 - 303 - 304 - 306 3/16 1/4-20 5/16-18 3/8-16 PKG BODY OVERALL LENGTH QTY TAKEUP 2.13 2.91 3.50 4.12 1.60 2.10 2.60 5.00 5-1/2" 7-1/2" 9" 10-1/2" HELIX SIZE I.D EYE WIRE DIAMETER 2.10 2.90 3.50 6.10 .394 .394 .591 .787 .154 .207 .268 .327 Note: Please use Series and Size No. when ordering: Example: 3/16 x 5-1/2 18.8 Stainless Steel Turnbuckles Hook and Eye Series Size No. 5198 -301 PKG QTY 1 1 1 1 Stock Sizes are shown in HEAVY type. 18.8 Stainless Steel Series 5198 TURNBUCKLES EYE AND EYE SIZE SIZE NONO - 310 - 313 DIAMETER OVERALL THREAD x LENGTH LENGTH DIAMETER 3/16 1/4-20 BODY OVERALL PKG LENGTH QTY TAKEUP HELIX SIZE I.D EYE 2.13 2.91 1.60 2.10 2.10 2.90 .394 .394 5-1/2" 7-1/2" Note: Please use Series and Size No. when ordering: Example: 3/16 x 5-1/2" 18.8 Stainless Steel Turnbuckles Eye and Eye Series Size No. 5198 -310 5198 .154 .207 1 1 Stock Sizes are shown in HEAVY type. SCREW BOLTS WITH 2 HEX NUTS DIAMETER THREAD x LENGTH DIAMETER - 325 PKG QTY 18.8 Stainless Steel Series SS IZE IZE NN OO WIRE DIAMETER 5 /1 6 - 1 8 OVERALL LENGTH PKG QTY 5" WIRE DIAMETER THREAD LENGTH I.D EYE 2 .8 7 .8 6 6 Note: Please use Series and Size No. when ordering: Example: 5/16 x 5" 18.8 Stainless Steel Screw Bolts with 2 Hex Nuts Series Size No. 5198 -325 PKG QTY .2 7 2 1 Stock Sizes are shown in HEAVY type. 18.8 Stainless Steel Series 5198 SCREW HOOKS Rust resistant screw hooks for organizing lawn and garden equipment, bicycles, hand tools, ladders, hoses, extension cords etc. Drill 3/16 hole, lubricate threads with beeswax or soap and screw in hook completely into surface. SIZE SIZE NONO - 410 - 423 DIAMETER THREAD x LENGTH DIAMETER 1 /4 " 3 /8 " OVERALL PKG LENGTH QTY 4 - 1 /4 " 4 - 7 /8 " THREAD LENGTH .7 8 7 1 .0 2 Note: Please use Series and Size No. when ordering: Example: 1/4 x 4-1/4" 18.8 Stainless Steel Screw Hooks Series Size No. 5198 -410 I.D EYE WIRE DIAMETER PKG QTY .7 8 7 1 .0 2 .2 3 6 .2 9 9 5 5 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NA55 18.8 Stainless Steel Series 5198 SLEEVE ANCHORS `Papco´ Sleeve Anchors can be used in cement block, thin wall or solid concrete, brick or stone. Ideal for anchoring partitions, cabinets, shelves, fire extinguishers, duct work, electrical systems, heating units etc. Drill hole same size as diameter of anchor to any depth exceeding minimum embedment. Clean hole of dust after drilling. Insert anchor through fixture and tighten nut with wrench 2-3 turns. Length is measured from washer to end of anchor. INSTALL DRILL SSIZE IZE NNOO - DIAMETER DIAMETER x LxENGTH LENGTH 006 007 008 009 010 3/8x1-7/8 3/8x3 1/2x2-1/4 1/2x3 1/2x4 MIN. PKG MAX. EMBED. QTY MAT. THICK 1-1/2 1-1/2 1-7/8 1-7/8 1-7/8 3/8 1-1/2 3/8 1-1/8 2-1/8 TIGHTEN STD. PKG. ULTIMATE LOAD CAPACITY LOAD LBS. SHEAR LBS. 50 25 10 10 10 2597 2597 5385 5385 5385 2872 2872 5582 5582 5582 * Ultimate load capacity in 4000 p.s.i. 3/4 inch crushed limestone aggregate concrete for depth of embedment indicated. Safe working loads should not exceed 25% of ultimate load capacity for single installations under static loading. Note: Please use Series and Size No. when ordering: Example: 3/8 x 1-7/8 18.8 Stainless Steel Sleeve Anchors Series Size No. 5198 -006 Stock Sizes are shown in HEAVY type. 18.8 Stainless Steel Series 5198 WEDGE ANCHORS `Papco´ Heavy-duty Wedge Anchors are ideal for anchoring electrical, heating, ventilating, plumbing and air conditioning systems - storage racks, machinery mounting, highway rails, guards and posts in concrete. Provides high corrosion resistance and is fully threaded for varying material thicknesses. Drill hole same size as diameter of anchor to any depth exceeding concrete embedment. Clean hole of dust after drilling. Insert anchor through fixture and tighten nut 3-5 turns. Length is measured from washer to end of anchor. INSTALL DRILL SSIZE IZE NNOO - 020 - 022 - 023 - 025 - 026 - 027 - 029 DIAMETER DIAMETER x LxENGTH LENGTH 1/4x2-1/4 3/8x2-1/4 3/8x2-3/4 3/8x3-3/4 1/2x2-3/4 1/2x3-3/4 1/2x4-1/2 CONCRETEPKG MAX. EMBED. QTY MAT. THICK 1-15/16 1-1/2 1-1/2 4-1/2 2-1/4 2-1/4 4-1/8 7/8 3/8 7/8 1-7/8 1-1/8 1-1/8 1-1/2 TIGHTEN STD. PKG. ULTIMATE LOAD CAPACITY LOAD LBS. SHEAR LBS. 25 50 40 25 10 15 10 2999 2319 3219 5935 5100 5384 7333 1910 4029 4029 4581 4760 6900 7449 * Ultimate load capacity in 4000 p.s.i. stone aggregate for the depth of embedment indicated. Safe working loads should not exceed 25% of ultimate load capacity for single installations under static loading. Note: Please use Series and Size No. when ordering: Example: 1/4 x 2-1/4 18.8 Stainless Steel Wedge Anchors Series Size No. 5198 -020 NA56 January, 2009 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 316 Stainless Steel HEX HEAD CAP SCREWS UNC - Unified National Coarse Thread Series 5200 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON OO 1/4" Diameter - 305 - 306 - 307 - 308 - 309 - 311 - 313 - 315 - 316 - 317 - 318 - 319 - 320 - 322 - 324 - 325 - 326 - 327 - 329 1/4-20X1/2 1/4-20X5/8 1/4-20X3/4 1/4-20X7/8 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2 1/4-20X1 3/4 1/4-20X2 1/4-20X2 1/4 1/4-20X 2 1/2 1/4-20X2 3/4 1/4-20X3 1/4-20X3 1/2 1/4-20X4 1/4-20X4 1/2 1/4-20X5 1/4-20X5 1/2 1/4-20X6 - 440 - 442 - 443 - 444 - 446 - 448 - 450 - 451 - 452 - 453 5/16-18X1/2 5/16-18X3/4 5/16-18X7/8 5/16-18X1 5/16-18X1 1/4 5/16-18X1 1/2 5/16-18X1 3/4 5/16-18X2 5/16-18X2 1/4 5/16-18X2 1/2 D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH x LENGTH QTY PKG KG KG CPASE QTY TY QQ TYTY 5/16" Diameter 100 100 100 100 100 100 100 100 100 50 50 50 25 25 25 10 10 10 10 2400 2400 2400 2400 2400 1600 1600 1600 1200 600 600 800 400 400 400 160 80 80 80 100 100 100 100 100 100 100 100 50 50 2400 1600 1600 1600 1600 800 800 800 400 400 5/16" Diameter - 454 - 455 - 456 - 457 - 459 - 460 - 461 - 462 - 464 5/16-18X2 3/4 5/16-18X3 5/16-18X3 1/4 5/16-18X3 1/2 5/16-18X4 5/16-18X4 1/2 5/16-18X5 5/16-18X5 1/2 5/16-18X6 - 485 - 486 - 487 - 488 - 489 - 491 - 493 - 495 - 496 - 497 - 498 - 499 - 500 - 502 - 504 - 505 - 506 - 507 - 509 - 510 3/8-16X1/2 3/8-16X5/8 3/8-16X3/4 3/8-16X7/8 3/8-16X1 3/8-16X1 1/4 3/8-16X1 1/2 3/8-16X1 3/4 3/8-16X2 3/8-16X2 1/4 3/8-16X2 1/2 3/8-16X2 3/4 3/8-16X3 3/8-16X3 1/2 3/8-16X4 3/8-16X4 1/2 3/8-16X5 3/8-16X5 1/2 3/8-16X6 3/8-16X6 1/2 50 25 25 25 25 10 10 10 10 300 400 150 200 400 160 80 80 80 100 100 100 100 100 100 100 100 100 50 50 50 25 25 25 10 10 10 10 Bulk: 1600 1600 1600 1200 1200 1200 600 600 600 400 400 400 200 200 200 80 80 80 80 24 3/8" Diameter Note: Please use Series and Size No. when ordering: Example: 1/4 -20 x 1/2 UNC 316 Stainless Steel Hex Head Cap Screws Series Size No. 5200 -305 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NB1 316 Stainless Steel HEX HEAD CAP SCREWS UNC - Unified National Coarse Thread Series 5200 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO 7/16" Diameter - 534 - 536 - 538 - 540 - 541 - 543 - 545 - 547 - 549 - 550 - 551 - 552 - 554 7/16-14X1 7/16-14X1 1/4 7/16-14X1 1/2 7/16-14X1 3/4 7/16-14X2 7/16-14X2 1/2 7/16-14X3 7/16-14X3 1/2 7/16-14X4 7/16-14X4 1/2 7/16-14X5 7/16-14X5 1/2 7/16-14X6 - 577 - 579 - 581 - 583 - 585 - 586 - 587 - 588 - 589 - 590 - 591 - 592 - 594 - 595 - 596 - 597 - 599 - 600 - 601 - 603 - 607 1/2-13X3/4 1/2-13X1 1/2-13X1 1/4 1/2-13X1 1/2 1/2-13X1 3/4 1/2-13X2 1/2-13X2 1/4 1/2-13X2 1/2 1/2-13X2 3/4 1/2-13X3 1/2-13X3 1/4 1/2-13X3 1/2 1/2-13X4 1/2-13X4 1/2 1/2-13X5 1/2-13X5 1/2 1/2-13X6 1/2-13X6 1/2 1/2-13X7 1/2-13X8 1/2-13X10 25 25 25 25 20 20 10 10 10 10 10 Bulk: Bulk: 800 600 600 400 350 320 200 200 200 200 200 175 175 25 25 25 25 25 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 Bulk: 500 500 400 400 200 240 240 240 160 80 120 80 80 80 80 80 80 80 80 80 70 - 668 - 670 - 672 - 674 - 675 - 676 - 677 - 678 - 679 - 680 - 681 - 683 - 684 - 685 - 686 - 688 - 689 - 690 - 692 - 696 5/8-11X1 5/8-11X1 1/4 5/8-11X1 1/2 5/8-11X1 3/4 5/8-11X2 5/8-11X2 1/4 5/8-11X2 1/2 5/8-11X2 3/4 5/8-11X3 5/8-11X3 1/4 5/8-11X3 1/2 5/8-11X4 5/8-11X4 1/2 5/8-11X5 5/8-11X5 1/2 5/8-11X6 5/8-11X6 1/2 5/8-11X7 5/8-11X8 5/8-11X10 - 712 - 714 - 716 - 717 - 718 - 719 - 720 - 721 - 722 - 723 - 724 - 725 - 726 3/4-10X1 1/4 3/4-10X1 1/2 3/4-10X1 3/4 3/4-10X2 3/4-10X2 1/4 3/4-10X2 1/2 3/4-10X2 3/4 3/4-10X3 3/4-10X3 1/4 3/4-10X3 1/2 3/4-10X3 3/4 3/4-10X4 3/4-10X4 1/2 25 25 25 20 20 20 20 20 10 10 10 10 10 10 10 10 Bulk: Bulk: Bulk: Bulk: 300 300 300 240 120 160 120 120 80 60 80 80 80 80 80 80 70 70 60 75 20 20 20 20 20 20 20 10 10 10 Bulk: 10 10 160 120 120 120 120 120 120 80 80 60 90 60 60 3/4" Diameter Note: Please use Series and Size No. when ordering: Example: 7/16-14 x 1 UNC 316 Stainless Steel Hex Head Cap Screws Series Size No. 5200 -534 January, 2009 PKG KG CPASE QTY TY QQ TYTY 5/8" Diameter 1/2" Diameter NB2 D DIAMETER IAMETER DIAMETER PKG xx L LENGTH ENGTH ENGTH x LENGTH QTY Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 316 Stainless Steel HEX HEAD CAP SCREWS UNC - Unified National Coarse Thread Series 5200 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON OO 3/4" Diameter - 727 - 728 - 730 - 731 - 732 - 733 - 734 - 738 3/4-10X5 3/4-10X5 1/2 3/4-10X6 3/4-10X6 1/2 3/4-10X7 3/4-10X7 1/2 3/4-10X8 3/4-10X10 - 760 - 762 - 763 - 764 - 765 - 766 - 767 - 768 - 770 - 771 - 772 - 773 - 775 7/8-9X1 1/2 7/8-9X2 7/8-9X2 1/4 7/8-9X2 1/2 7/8-9X2 3/4 7/8-9X3 7/8-9X3 1/4 7/8-9X3 1/2 7/8-9X4 7/8-9X4 1/2 7/8-9X5 7/8-9X5 1/2 7/8-9X6 D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH x LENGTH QTY PKG KG KG CPASE QTY TY QQ TYTY 1" Diameter 10 10 10 Bulk: Bulk: Bulk: Bulk: Bulk: 60 60 60 60 60 60 60 50 10 10 10 10 10 10 10 10 10 10 10 10 10 80 60 60 60 60 80 60 60 60 60 60 40 40 7/8" Diameter - 803 - 804 - 805 - 806 - 807 - 808 - 809 - 811 - 812 - 813 - 814 - 816 - 818 - 820 - 824 Note: Please use Series and Size No. when ordering: Example: 3/4 -10 x 5 UNC 316 Stainless Steel Hex Head Cap Screws Series Size No. 5200 -727 1-8X2 1-8X2 1/4 1-8X2 1/2 1-8X2 3/4 1-8X3 1-8X3 1/4 1-8X3 1/2 1-8X4 1-8X4 1/2 1-8X5 1-8X5 1/2 1-8X6 1-8X7 1-8X8 1-8X10 Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: Bulk: 90 85 80 70 65 60 60 50 40 40 40 40 35 30 30 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NB3 316 Stainless Steel CARRIAGE BOLTS UNC - Unified National Coarse Thread Fully Threaded Series 5202 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO 1/4" Diameter - 309 - 311 - 313 - 316 - 318 - 320 - 322 - 324 1/4-20x1 1/4-20x1-1/4 1/4-20x1-1/2 1/4-20x2 1/4-20x2-1/2 1/4-20x3 1/4-20x3-1/2 1/4-20x4 - 444 - 448 - 451 - 453 - 455 - 457 - 459 - 460 5/16-18x1 5/16-18x1-1/2 5/16-18x2 5/16-18x2-1/2 5/16-18x3 5/16-18x3-1/2 5/16-18x4 5/16-18x4-1/2 100 100 100 100 50 25 25 25 2400 1600 1600 1200 400 400 200 400 - 493 - 496 - 498 - 500 - 502 - 504 - 505 - 506 - 507 - 509 3/8-16x1-1/2 3/8-16x2 3/8-16x2-1/2 3/8-16x3 3/8-16x3-1/2 3/8-16x4 3/8-16x4-1/2 3/8-16x5 3/8-16x5-1/2 3/8-16x6 50 50 50 25 25 25 25 25 1200 800 600 400 400 400 200 200 - 583 - 586 - 588 - 590 - 592 - 594 - 595 - 596 1/2-13x1-1/2 1/2-13x2 1/2-13x2-1/2 1/2-13x3 1//2-13x3-1/2 1/2-13x4 1/2-13x4-1/2 1/2-13x5 50 25 25 25 25 10 10 10 10 10 600 400 400 200 200 80 80 80 80 80 25 25 20 10 10 10 10 10 200 150 160 80 80 80 80 80 1/2" Diameter Note: Please use Series and Size No. when ordering: Example: 1/4 -20 x 1 316 Stainless Steel Carriage Bolts Series Size No. 5202 -309 January, 2009 PKG KG KG CPASE QTY QQ TYTY 3/8" Diameter 5/16" Diameter NB4 D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH ENGTH x LENGTH QTY Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited Series 5226 316 Stainless Steel FINISHED HEX NUTS UNC - Unified National Coarse Thread SS IZE IZE NN OO - 014 - 016 - 018 - 020 - 022 - 024 - 026 B DOLT IAMETER DIAMETER IxNCHES LENGTH 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 5/8-11 3/4-10 PKG QTY 100 100 100 50 50 25 20 KG CP ASE QQ TYTY 4800 3200 2400 1200 1200 400 240 Note: Please use Series and Size No. when ordering: Example: 1/4 -20 UNC 316 Stainless Steel Finished Hex Nuts Series Size No. 5226 -014 SIZE IZE SSIZE IZE OO NN ON - 028 - 030 - 032 - 034 - 038 - 040 DOLT IAMETER DIAMETER PKG B IAMETER DIAMETER LENGTH x LENGTH QTY IxNCHES 7/8-9 1-8 1 1/8-7 1 1/4-7 1 1/2-6 1 3/4-5 PKG KG KG CPASE QTY TY QQ TYTY 10 10 10 10 10 10 240 120 90 60 60 60 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NB5 316 Stainless Steel Series 5230 HEAVY SEMI-FINISHED HEX NUTS UNC - Unified National Coarse Thread SS IZE IZE NN OO - 014 - 016 - 018 - 020 - 022 - 024 - 026 B DOLT IAMETER DIAMETER IxNCHES LENGTH PKG QTY 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 5/8-11 3/4-10 100 100 100 50 50 25 20 KG CP ASE QQ TYTY 4800 2400 1600 1200 600 400 240 SSIZE SIZE IZE NN ON O OO - 028 - 030 - 032 - 034 - 038 - 040 B DOLT IAMETER IAMETER DIAMETER DIAMETER PKG IxNCHES LENGTH x LENGTH QTY 7/8-9 1-8 1 1/8-7 1 1/4-7 1 1/2-6 1 3/4-5 Note: Please use Series and Size No. when ordering: Example: 1/4 -20 UNC 316 Stainless Steel Heavy Semi-Finished Hex Nuts Series Size No. 5230 -014 PKG KG KG CPASE QTY TY QQ TYTY 10 10 10 10 10 10 120 120 90 60 60 60 Stock Sizes are shown in HEAVY type. 316 Stainless Steel Series 5232 NYLON INSERT STOP NUTS UNC - Unified National Coarse Thread SS IZE IZE NN OO - 014 - 016 - 018 B DOLT IAMETER DIAMETER IxNCHES LENGTH PKG QTY 1/4-20 5/16-18 3/8-16 100 100 100 KG CP ASE QQ TYTY 4800 3200 2400 SSIZE SIZE IZE IZE NN ON O OO - 022 - 024 - 026 Note: Please use Series and Size No. when ordering: Example: 1/4 -20 UNC 316 Stainless Steel Heavy Semi-Finished Hex Nuts Series Size No. 5232 -014 5291 D DIAMETER IAMETER xx LLENGTH ENGTH 1/4-20X6' 5/16-18X6' 3/8-16X6' 1/2-13X6' PKG PKG QTY QTY 1 1 1 1 SIZE IZE SSIZE IZE O NN ON OO - 364 - 366 - 368 - 370 Note: Please use Series and Size No. when ordering: Example: 1/4 -20 x 6' 316 UNC Stainless Steel Threaded Rod - 6 Foot Series Size No. 5291 -354 January, 2009 PKG KG KG CPASE QTY TY QQ TYTY 50 20 20 800 400 240 Stock Sizes are shown in HEAVY type. THREADED ROD - 6 FOOT SS IZE IZE NN OO NB6 1/2-13 5/8-11 3/4-10 316 Stainless Steel Series - 354 - 356 - 358 - 362 B DOLT IAMETER IAMETER DIAMETER DIAMETER PKG IxNCHES LENGTH ENGTH x LENGTH QTY UNC - Unified National Coarse Thread DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH 5/8-11X6' 3/4-10X6' 7/8-9X6' 1-8X6' PKG PKG KG QTYQTY TY 1 1 1 1 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited Series 5255 SS IZE IZE NN OO - 002 - 004 - 006 - 008 - 010 - 014 - 016 - 018 - 020 - 022 - 024 - 026 - 028 - 030 - 032 - 034 - 038 DSIAMETER CREW OR xBLOLT ENGTH SIZE #2 #4 #6 #8 #10 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1 1 1/8 1 1/4 1 1/2 316 Stainless Steel FLAT WASHERS PKG OUTSIDE QTY DIAMETER INSIDE DIAMETER 0.094 0.125 0.156 0.174 0.203 0.281 0.345 0.406 0.500 0.531 0.688 0.813 0.938 1.062 1.187 1.312 1.563 0.250 0.312 0.375 0.375 0.438 0.625 0.750 0.875 1.125 1.250 1.500 1.875 2.000 2.000 2.500 2.750 3.250 THICKNESS 0.016-0.025 0.030-0.0335 0.030-0.0335 0.030-0.0335 0.030-0.0335 0.0437-0.055 0.0437-0.055 0.0437-0.053 0.055-0.069 0.055-0.069 0.069-0.087 0.094-0.116 0.094-0.116 0.116-0.130 0.116-0.130 0.116-0.130 0.1305-0.148 Note: Please use Series and Size No. when ordering: Example: #2 316 Stainless Steel Flat Washers Series Size No. 5255 -002 Series 5258 SS IZE IZE NN OO - 002 - 004 - 006 - 008 - 010 - 014 - 016 - 018 - 020 SDCREW IAMETER OR B x OLT LENGTH SIZE #2 #4 #6 #8 #10 1/4 5/16 3/8 7/16 PKG QTY 100 100 100 100 100 100 100 100 50 50 25 20 20 20 10 10 10 CASE QTY 7500 7500 7500 7500 7500 7500 7500 4500 2250 1500 1125 600 400 400 200 200 120 Stock Sizes are shown in HEAVY type. 316 Stainless Steel MEDIUM LOCK WASHERS PKG QTY 100 100 100 100 100 100 100 100 100 KG CP ASE QQ TYTY 7500 7500 7500 7500 7500 7500 7500 4500 3000 Note: Please use Series and Size No. when ordering: Example: #2 316 Stainless Steel Medium Lock Washers Series Size No. 5258 -002 SSIZE SIZE IZE NN ON O OO - 022 - 024 - 026 - 028 - 030 - 032 - 034 - 038 S DCREW IAMETER IAMETER OR DIAMETER PKG B x OLT LENGTH ENGTH SIZE x LENGTH QTY 1/2 5/8 3/4 7/8 1 1 1/8 1 1/4 1 1/2 100 100 25 25 20 20 20 20 PKG KG KG CPASE QTY TY QQ TYTY 2000 1600 800 1600 400 300 200 100 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NB7 Silicon Bronze HEX HEAD CAP SCREWS FULL THREAD UNC - Unified National Coarse Thread Series 5400 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO 1/4" Diameter - 305 - 306 - 307 - 308 - 309 - 311 - 313 - 315 - 316 - 317 - 318 1/4-20X1/2 1/4-20X5/8 1/4-20X3/4 1/4-20X7/8 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2 1/4-20X1 3/4 1/4-20X2 1/4-20X2 1/4 1/4-20X2 1/2 - 440 - 441 - 442 - 443 - 444 - 446 - 448 - 450 - 451 - 452 - 453 - 454 - 455 - 457 - 459 5/16-18X1/2 5/16-18X5/8 5/16-18X3/4 5/16-18X7/8 5/16-18X1 5/16-18X1 1/4 5/16-18X1 1/2 5/16-18X1 3/4 5/16-18X2 5/16-18X2 1/4 5/16-18X2 1/2 5/16-18X2 3/4 5/16-18X3 5/16-18X3 1/2 5/16-18X4 100 100 100 100 100 50 50 50 50 25 25 3200 3200 2400 2400 2400 1200 1200 800 800 600 600 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 2400 2400 1600 1600 1600 1200 800 800 800 300 300 300 400 400 400 100 100 100 100 100 100 100 100 100 25 1600 1600 1200 1200 1200 1200 800 600 600 400 3/8" Diameter 3/8-16X1/2 3/8-16X5/8 3/8-16X3/4 3/8-16X7/8 3/8-16X1 3/8-16X1 1/4 3/8-16X1 1/2 3/8-16X1 3/4 3/8-16X2 3/8-16X2 1/4 PKG KG KG CPASE QTY TY QQ TYTY 3/8" Diameter 5/16" Diameter - 485 - 486 - 487 - 488 - 489 - 491 - 493 - 495 - 496 - 497 DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH - 498 - 499 - 500 - 501 - 502 - 504 3/8-16X2 1/2 3/8-16X2 3/4 3/8-16X3 3/8-16X3 1/4 3/8-16X3 1/2 3/8-16X4 - 577 - 578 - 579 - 581 - 583 - 585 - 586 - 587 - 588 - 589 - 590 - 591 - 592 - 594 - 596 - 597 - 599 1/2-13X3/4 1/2-13X7/8 1/2-13X1 1/2-13X1 1/4 1/2-13X1 1/2 1/2-13X1 3/4 1/2-13X2 1/2-13X2 1/4 1/2-13X2 1/2 1/2-13X2 3/4 1/2-13X3 1/2-13X3 1/4 1/2-13X3 1/2 1/2-13X4 1/2-13X5 1/2-13X5-1/2 1/2-13X6 - 668 - 670 - 672 - 674 - 675 - 676 - 677 - 678 - 679 - 680 - 681 - 683 5/8-11X1 5/8-11X1 1/4 5/8-11X1 1/2 5/8-11X1 3/4 5/8-11X2 5/8-11X2 1/4 5/8-11X2 1/2 5/8-11X2 3/4 5/8-11X3 5/8-11X3 1/4 5/8-11X3 1/2 5/8-11X4 25 25 25 25 25 25 200 150 200 200 200 200 50 50 50 50 50 50 50 25 25 25 25 25 25 25 10 10 10 800 600 600 600 300 300 300 200 200 200 200 200 150 150 60 60 60 25 25 25 15 15 15 15 15 15 10 10 10 300 300 300 90 90 90 90 90 90 80 80 80 1/2" Diameter 5/8" Diameter Note: Please use Series and Size No. when ordering: Example: 1/4 -20 x 1/2 UNC Silicon Bronze Hex Head Cap Screws Series Size No. 5400 -305 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NC1 Silicon Bronze Series 5426 FINISHED HEX NUTS UNC - Unified National Coarse Thread SS IZE IZE NN OO - 014 - 016 - 018 - 020 - 022 B DOLT IAMETER DIAMETER IxNCHES LENGTH 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 PKG QTY KG CP ASE QQ TYTY 100 100 100 50 50 4800 3200 2400 1200 1200 SSIZE SIZE IZE NN ON O OO B DOLT IAMETER IAMETER DIAMETER DIAMETER PKG IxNCHES LENGTH x LENGTH QTY - 024 - 026 - 028 - 030 5/8-11 3/4-10 7/8-9 1-8 Note: Please use Series and Size No. when ordering: Example: 1/4 -20 UNC Silicon Bronze Finished Hex Nuts Series Size No. 5426 -014 5455 - 807 - 808 - 810 - 815 - 816 - 817 - 818 - 819 - 820 - 822 - 824 - 826 - 828 - 830 400 240 240 120 Stock Sizes are shown in HEAVY type. FLAT WASHERS DSIAMETER CREW OR xBLOLT ENGTH SIZE #6 #8 # 10 1/4 5/16 5/16 3/8 3/8 7/16 1/2 5/8 3/4 7-8 1" OUTSIDE PKG DIAMETER QTY 3/8 3/8 7/16 11/16 3/4 7/8 7/8 1" 1-1/8 1-1/4 1-1/2 1-7/8 2-1/4 2-1/2 January, 2009 INSIDE DIAMETER 0.147 0.172 0.200 0.260 0.337 0.337 0.391 0.391 0.525 0.562 0.687 0.812 0.937 1.062 Note: Please use Series and Size No. when ordering: Example: #6 Silicon Bronze Flat Washers Series Size No. 5455 -807 NC2 25 20 10 10 Silicon Bronze Series SS IZE IZE NN OO PKG KG KG CPASE QTY TY QQ TYTY THICKNESS 0.032 0.032 0.036 0.040 0.064 0.064 0.064 0.064 0.064 0.091 0.091 0.102 0.114 0.128 PKG QTY 100 100 100 100 100 100 100 100 50 50 25 20 20 20 CASE QTY 7500 7500 7500 7500 4500 4500 4500 3000 2250 1500 750 400 400 400 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited Silicon Bronze Series 5458 SS IZE IZE NN OO - 002 - 003 - 004 - 006 - 008 - 010 - 012 - 014 SDCREW IAMETER OR B x OLT LENGTH SIZE #2 #3 #4 #6 (1/8) #8 (5/32) #10 (3/16) #12 (7/32) 1/4 MEDIUM LOCK WASHERS PKG QTY KG CP ASE QQ TYTY 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 7500 SIZE IZE SSIZE O NN ON OO DCREW IAMETER DIAMETER PKG S IAMETER OR x OLT LENGTH x LENGTH QTY B ENGTH SIZE - 016 - 018 - 020 - 022 - 024 - 026 - 028 - 030 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1" Note: Please use Series and Size No. when ordering: Example: #2 Silicon Bronze Medium Lock Washers Series Size No. 5458 -002 7500 4500 3000 2000 1600 800 1600 400 Stock Sizes are shown in HEAVY type. Silicon Bronze Series 5461 100 100 100 100 100 25 25 20 PKG KG KG CPASE QTY TY QQ TYTY TOOTH LOCK WASHERS EXTERNAL SS IZE IZE NN OO - 102 - 104 - 106 - 108 - 110 - 114 SDCREW IAMETER OR B x OLT LENGTH SIZE #2 #4 #6 (1/8) #8 (5/32) #10 (3/16) 1/4 PKG QTY KG CP ASE QQ TYTY 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 SIZE IZE SSIZE IZE OO NN ON DCREW IAMETER DIAMETER PKG S IAMETER OR x OLT LENGTH x LENGTH QTY B SIZE - 118 - 120 - 122 - 124 - 128 - 132 5/16 3/8 7/16 1/2 5/8 3/4 Note: Please use Series and Size No. when ordering: Example: #2 Silicon Bronze Tooth Lock Washers External Series Size No. 5461 -102 7500 7500 4500 4500 3000 2000 Stock Sizes are shown in HEAVY type. Silicon Bronze Series 5462 100 100 100 100 100 100 PKG KG KG CPASE QTY TY QQ TYTY TOOTH LOCK WASHERS INTERNAL SS IZE IZE NN OO - 202 - 204 - 206 - 208 - 210 - 214 SDCREW IAMETER OR B x OLT LENGTH SIZE #2 #4 #6 (1/8) #8 (5/32) #10 (3/16) 1/4 PKG QTY 100 100 100 100 100 100 KG CP ASE Q QTYTY 7500 7500 7500 7500 7500 7500 Note: Please use Series and Size No. when ordering: Example: #2 Silicon Bronze Tooth Lock Washers Internal Series Size No. 5462 -202 SSIZE SIZE IZE IZE NN ON O OO S DCREW IAMETER IAMETER OR DIAMETER PKG B x OLT LENGTH ENGTH SIZE x LENGTH QTY - 216 - 218 - 222 - 224 - 228 - 232 5/16 3/8 #7/16 1/2 5/8 3/4 100 100 100 100 100 100 PKG KG KG CPASE QTY Q TY QTYTY 7500 7500 7500 4500 2000 2000 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NC3 Brass HEX HEAD CAP SCREWS UNC - Unified National Coarse Thread Fully Threaded Series 5600 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH ENGTH x LENGTH QTY 1/4" - 305 - 306 - 307 - 308 - 309 - 311 - 313 - 315 - 316 - 317 - 318 - 319 - 320 - 322 - 324 1/4-20X1/2 1/4-20X5/8 1/4-20X3/4 1/4-20X7/8 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2 1/4-20X1 3/4 1/4-20X2 1/4-20X2 1/4 1/4-20X2 1/2 1/4-20X2 3/4 1/4-20X3 1/4-20X3 1/2 1/4-20X4 - 440 - 441 - 442 - 443 - 444 - 446 - 448 - 450 - 451 - 452 - 453 - 454 - 455 5/16-18X1/2 5/16-18X5/8 5/16-18X3/4 5/16-18X7/8 5/16-18X1 5/16-18X1 1/4 5/16-18X1 1/2 5/16-18X1 3/4 5/16-18X2 5/16-18X2 1/4 5/16-18X2 1/2 5/16-18X2 3/4 5/16-18X3 PKG KG KG CPASE QTY TY QQ TYTY 3/8" 100 100 100 100 100 50 50 50 50 50 50 50 25 25 25 3200 3200 2400 2400 2400 1200 800 800 800 600 800 400 600 600 600 - 485 - 486 - 487 - 488 - 489 - 491 - 493 - 495 - 496 - 497 - 498 - 499 - 500 - 502 - 504 3/8-16X1/2 3/8-16X5/8 3/8-16X3/4 3/8-16X7/8 3/8-16X1 3/8-16X1 1/4 3/8-16X1 1/2 3/8-16X1 3/4 3/8-16X2 3/8-16X2 1/4 3/8-16X2 1/2 3/8-16X2 3/4 3/8-16X3 3/8-16X3 1/2 3/8-16X4 100 100 100 100 100 100 50 50 50 50 50 50 25 2400 2400 2400 1600 1600 1200 800 800 400 400 600 300 200 - 577 - 579 - 581 - 583 - 585 - 586 - 587 - 588 - 589 - 590 - 592 - 594 - 595 - 596 - 597 - 599 1/2-13X3/4 1/2-13X1 1/2-13X1 1/4 1/2-13X1 1/2 1/2-13X1 3/4 1/2-13X2 1/2-13X2 1/4 1/2-13X2 1/2 1/2-13X2 3/4 1/2-13X3 1/2-13X3 1/2 1/2-13X4 1/2-13X4 1/2 1/2-13X5 1/2-13X5 1/2 1/2-13X6 5/16" 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 1600 1600 1200 1200 1200 800 800 600 600 400 400 400 300 400 400 50 50 50 50 50 50 50 50 25 25 25 25 10 10 10 10 600 600 400 300 300 300 300 300 150 150 150 150 200 200 150 100 1/2" Note: Please use Series and Size No. when ordering: Example: 1/4 -20 x 1/2 UNC Brass Hex Head Cap Screws Series Size No. 5600 -305 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 ND1 Brass Series 5626 FINISHED HEX NUTS UNC - Unified National Coarse Thread SS IZE IZE NN OO - 014 - 016 - 018 - 020 - 022 - 024 B DOLT IAMETER DIAMETER IxNCHES LENGTH 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 5/8-11 PKG QTY KG CP ASE QQ TYTY 100 100 100 50 50 25 4800 3200 2400 1200 1200 600 SSIZE SIZE IZE IZE NN ON O OO - 026 - 028 - 030 - 032 - 034 - 038 B DOLT IAMETER IAMETER DIAMETER DIAMETER PKG IxNCHES LENGTH ENGTH x LENGTH QTY 3/4-10 7/8-9 1-8 1 1/8-7 1 1/4-7 1 1/2-6 Note: Please use Series and Size No. when ordering: Example: 1/4 -20 UNC Brass Finished Hex Nuts Series Size No. 5626 -014 20 20 20 10 10 10 240 240 120 90 90 60 Stock Sizes are shown in HEAVY type. Brass Series 5627 PKG KG KG CPASE QTY TY QQ TYTY FINISHED HEX NUTS UNF - Unified National Fine Thread SS IZE IZE NN OO - 014 - 016 - 018 - 020 - 022 B DOLT IAMETER DIAMETER IxNCHES LENGTH 1/4-28 5/16-24 3/8-24 7/16-20 1/2-20 PKG QTY KG CP ASE Q QTYTY 100 100 100 50 50 4800 3600 2400 1200 1200 Note: Please use Series and Size No. when ordering: Example: 1/4 -28 UNF Brass Finished Hex Nuts Series Size No. 5627 -014 ND2 January, 2009 SSIZE SIZE IZE IZE NN ON O OO - 024 - 026 - 028 - 030 B DOLT IAMETER IAMETER DIAMETER DIAMETER PKG IxNCHES LENGTH ENGTH x LENGTH QTY 5/8-18 3/4-16 7/8-14 1-14 PKG KG KG CPASE QTY Q TY QTYTY 25 20 20 20 600 240 240 120 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited Brass Series 5628 FINISHED HEX JAM NUTS UNC - Unified National Coarse Thread SS IZE IZE NN OO - 014 - 016 - 018 - 020 - 022 - 024 B DOLT IAMETER DIAMETER IxNCHES LENGTH 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 5/8-11 PKG QTY KG CP ASE QQ TYTY 100 100 100 50 50 25 4800 4800 3200 2400 1200 600 SSIZE SIZE IZE IZE NN ON O OO - 026 - 028 - 030 - 032 - 034 B DOLT IAMETER IAMETER DIAMETER DIAMETER PKG IxNCHES LENGTH ENGTH x LENGTH QTY 3/4-10 7/8-9 1-8 1 1/8-7 1 1/4-7 Note: Please use Series and Size No. when ordering: Example: 1/4-20 UNC Brass Finished Hex Jam Nuts Series Size No. 5628 -014 20 10 10 10 10 480 320 240 180 120 Stock Sizes are shown in HEAVY type. Brass Series 5629 PKG KG KG CPASE QTY TY QQ TYTY FINISHED HEX JAM NUTS UNF - Unified National Fine Thread SS IZE IZE NN OO - 014 - 016 - 018 - 020 - 022 B DOLT IAMETER DIAMETER IxNCHES LENGTH 1/4-28 5/16-24 3/8-24 7/16-20 1/2-20 PKG QTY 100 100 100 50 50 KG CP ASE QQ TYTY 4800 4800 3200 2400 1200 Note: Please use Series and Size No. when ordering: Example: 1/4 -28 UNF Brass Finished Hex Jam Nuts Series Size No. 5629 -014 SIZE IZE SSIZE IZE O NN ON OO - 024 - 026 - 028 - 030 DOLT IAMETER DIAMETER PKG B IAMETER DIAMETER LENGTH x LENGTH QTY IxNCHES ENGTH 5/8-18 3/4-16 7/8-14 1-14 PKG KG KG CPASE QTY TY QQ TYTY 25 20 10 10 600 480 320 240 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 ND3 Brass Series 5630 HEAVY SEMI-FINISHED HEX NUTS UNC - Unified National Coarse Thread SS IZE IZE NN OO - 014 - 016 - 018 - 020 - 022 - 024 B DOLT IAMETER DIAMETER IxNCHES LENGTH 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 5/8-11 PKG QTY 100 100 100 50 50 25 KG CP ASE QQ TYTY 4800 2400 1600 1200 600 400 SSIZE SIZE IZE IZE NN ON O OO - 026 - 028 - 030 - 032 - 034 - 038 B DOLT IAMETER IAMETER DIAMETER DIAMETER PKG IxNCHES LENGTH ENGTH x LENGTH QTY 3/4-10 7/8-9 1-8 1 1/8-7 1 1/4-7 1 1/2-6 Note: Please use Series and Size No. when ordering: Example: 1/4 -20 UNC Brass Heavy Semi-Finished Hex Nuts Series Size No. 5630 -014 20 10 10 10 10 10 240 120 120 90 60 40 Stock Sizes are shown in HEAVY type. Brass Series 5632 PKG KG KG CPASE QTY TY QQ TYTY HEAVY SEMI-FINISHED HEX JAM NUTS UNC - Unified National Coarse Thread SS IZE IZE NN OO - 014 - 016 - 018 - 020 - 022 B DOLT IAMETER DIAMETER IxNCHES LENGTH 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 PKG QTY 100 100 100 50 50 KG CP ASE Q QTYTY 4800 3600 2400 1800 1200 SIZE IZE SSIZE IZE N N O O NOO - 024 - 026 - 028 - 030 - 034 Note: Please use Series and Size No. when ordering: Example: 1/4 -20 UNC Brass Heavy Semi-Finished Hex Jam Nuts Series Size No. 5632 -014 ND4 January, 2009 DOLT IAMETER DIAMETER PKG B IAMETER DIAMETER x L ENGTH x LENGTH QTY INCHES ENGTH 5/8-11 3/4-10 7/8-9 1-8 1 1/4-7 PKG KG KG CPASE QTY Q TY QTYTY 25 20 10 10 10 600 320 240 160 120 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited Brass Series 5636 SS IZE IZE NN OO - 002 - 003 - 004 - 005 - 006 - 008 - 010 HEX MACHINE SCREW NUTS B DOLT IAMETER DIAMETER IxNCHES LENGTH 2-56 3-48 4-40 5-40 6-32 8-32 10-24 PKG QTY KG CP ASE QQ TYTY 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 SSIZE SIZE IZE IZE NN ON O OO - 011 - 012 - 014 - 015 - 016 - 018 B DOLT IAMETER IAMETER DIAMETER DIAMETER PKG IxNCHES LENGTH ENGTH x LENGTH QTY 10-32 UNF 12-24 1/4-20 1/4-28 UNF 5/16-18 3/8-16 Note: Please use Series and Size No. when ordering: Example: 2-56 Brass Machine Screw Nuts Series Size No. 5636 -002 5638 - 006 - 008 - 010 - 011 - 012 - 014 - 015 B DOLT IAMETER DIAMETER IxNCHES LENGTH 6-32 8-32 10-24 10-32 UNF 12-24 1/4-20 1/4-28 UNF ACORN NUTS PKG QTY KG CP ASE QQ TYTY 100 100 100 100 100 100 100 7500 7500 4500 4500 4500 4500 5000 SIZE IZE SSIZE IZE O NN ON OO - 016 - 017 - 018 - 019 - 020 - 022 - 024 DOLT IAMETER DIAMETER PKG B IAMETER DIAMETER LENGTH x LENGTH QTY IxNCHES ENGTH 5/16-18 5/16-24 UNF 3/8-16 3/8-24 UNF 7/16-14 1/2-13 5/8-11 5638 - 056 - 058 6-32 8-32 PKG KG KG CPASE QTY TY QQ TYTY 100 100 100 100 50 50 25 2000 3000 1600 1600 1200 1200 400 Stock Sizes are shown in HEAVY type. Brass Series B DOLT IAMETER DIAMETER IxNCHES LENGTH 7500 7500 7500 7500 3000 2000 Stock Sizes are shown in HEAVY type. Note: Please use Series and Size No. when ordering: Example: 6-32 Brass Acorn Nuts Series Size No. 5638 -006 SS IZE IZE NN OO 100 100 100 100 100 100 Brass Series SS IZE IZE NN OO PKG KG KG CPASE QTY TY QQ TYTY KNURLED NUTS PKG QTY KG CP ASE QQ TYTY 50 50 3750 3750 Note: Please use Series and Size No. when ordering: Example: 6-32 Brass Knurled Nuts Series Size No. 5638 -056 SSIZE SIZE IZE IZE NN ON O OO - 060 - 061 B DOLT IAMETER IAMETER DIAMETER DIAMETER PKG IxNCHES LENGTH ENGTH x LENGTH QTY 10-24 10-32 UNF PKG KG KG CPASE QTY TY QQ TYTY 50 50 2250 2250 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 ND5 Brass Series 5639 SS IZE IZE NN OO WING NUTS B DOLT IAMETER DIAMETER IxNCHES LENGTH - 004 - 006 - 008 - 010 - 011 4-40 6-32 8-32 10-24 10-32 UNF PKG QTY KG CP ASE QQ TYTY 100 100 100 100 100 7500 7500 4500 4500 4500 SSIZE SIZE IZE IZE NN ON O OO - 014 - 016 - 018 - 020 - 022 B DOLT IAMETER IAMETER DIAMETER DIAMETER PKG IxNCHES LENGTH ENGTH x LENGTH QTY 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 Note: Please use Series and Size No. when ordering: Example: 4-40 Brass Wing Nuts Series Size No. 5639 -004 5655 - 802 - 803 - 804 - 805 - 806 - 807 - 808 - 809 - 810 - 811 - 812 - 813 - 814 - 815 - 816 - 817 - 818 - 819 - 820 - 822 - 823 - 824 - 826 - 828 - 830 3000 2000 1200 600 600 Stock Sizes are shown in HEAVY type. FLAT WASHERS SDCREW OR IAMETER BxOLT SIZE LENGTH #2 #3 #4 #5 #6 (1/8) #6 (1/8) #8 (5/32) #8 (5/32) #10 (3/16) #10 (3/16) 7/32 7/32 1/4 1/4 5/16 5/16 3/8 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 OUTSIDE DIAMETER 3/16 1/4 9/32 9/32 5/16 3/8 3/8 7/16 7/16 1/2 1/2 9/16 9/16 11/16 3/4 7/8 7/8 1 1-1/8 1-1/4 1-1/4 1-1/2 1-7/8 2-1/4 2-1/2 Note: Please use Series and Size No. when ordering: Example: #2 Brass Flat Washers Series Size No. 5655 -802 ND6 100 100 100 50 50 Brass Series SS IZE IZE NN OO PKG KG KG CPASE QTY TY QQ TYTY January, 2009 PKG INSIDE QTY DIAMETER 0.090 0.105 0.119 0.119 0.147 0.147 0.172 0.172 0.200 0.200 0.227 0.227 0.260 0.260 0.337 0.337 0.391 0.391 1/2 9/16 5/8 11/16 13/16 15/16 1-1/16 THICKNESS .020 .020 .025 .025 .028 .032 .032 .036 .036 .040 .040 .040 .040 .051 .064 .064 .064 .081 .081 .091 .091 .102 .114 .128 .144 PKG QTY 7637 4016 2572 2572 1949 1086 1165 711 760 494 522 391 417 200 144 96 106 60 50 37 34 23 13 8 6 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited Brass Series 5656 SS IZE IZE NN OO - 670 - 671 - 673 - 675 COUNTERSUNK FINISHING WASHERS SDCREW IAMETER OR B x OLT LENGTH SIZE #4 #6 #8 #10 PKG QTY KG CP ASE QQ TYTY 100 100 100 100 7500 7500 7500 7500 SIZE IZE SSIZE O NN ON OO - 677 - 679 - 681 DCREW IAMETER DIAMETER PKG S IAMETER OR x OLT LENGTH x LENGTH QTY B ENGTH SIZE #12 1/4 #5/16 Note: Please use Series and Size No. when ordering: Example: #4 UNC Brass Finishing Washers Series Size No. 5656 -670 5656 - 711 - 773 Stock Sizes are shown in HEAVY type. FINISHING WASHERS COUNTERSUNK FLUSH TYPE SDCREW IAMETER OR B xOLT LENGTH SIZE #6(1/8) #8(5/32) PKG QTY 100 100 KG CP ASE QQ TYTY 7500 7500 SSIZE SIZE IZE IZE NN ON O OO - 775 - 779 S DCREW IAMETER IAMETER OR DIAMETER PKG B x OLT LENGTH ENGTH SIZE x LENGTH QTY #10(3/16) 1/4 Note: Please use Series and Size No. when ordering: Example: #6(1/8) Brass Finishing Washers Countersunk Flush Type Series Size No. 5656 -711 100 100 PKG KG KG CPASE QTY TY QQ TYTY 7500 7500 Stock Sizes are shown in HEAVY type. Brass Series 5656 4500 4500 3000 Brass Series SS IZE IZE NN OO 100 100 100 PKG KG KG CPASE QTY TY QQ TYTY FINISHING WASHERS COUNTERSUNK STANDARD TYPE NICKEL PLATED SS IZE IZE NN OO - 971 - 973 - 975 - 977 SDCREW IAMETER OR B x OLT LENGTH SIZE #6 #8 #10 #12 PKG QTY 100 100 100 100 KG CP ASE QQ TYTY 7500 7500 7500 7500 SIZE IZE SSIZE IZE OO NN ON - 979 - 981 - 983 DCREW IAMETER DIAMETER PKG S IAMETER OR x OLT LENGTH x LENGTH QTY B SIZE 1/4 5/16 3/8 100 100 100 PKG KG KG CPASE QTY TY QQ TYTY 7500 7500 4500 Note: Please use Series and Size No. when ordering: Stock Sizes are shown in HEAVY type. Example: #6 Brass Finishing Washers Countersunk Standard Type Nickel Plated Series Size No. 5656 -971 H. Paulin & Co. Limited January, 2009 ND7 Brass COTTER PINS Series 5680 SS IZE IZE NN OO - 043 - 045 - 047 - 049 - 051 - 054 - 056 - 137 - 139 - 141 - 143 - 145 - 147 - 148 - 150 - 152 - 165 - 167 - 169 - 171 D DIAMETER IAMETER xx LLENGTH ENGTH 1/16X1/2 1/16X3/4 1/16X1 1/16X1 1/4 1/16X1 1/2 1/16X2 1/16X2 1/2 1/8X1/2 1/8X3/4 1/8X1 1/8X1 1/4 1/8X1 1/2 1/8X1 3/4 1/8X2 1/8X2 1/2 1/8X3 5/32X3/4 5/32X1 5/32X1 1/4 5/32X1 1/2 PKG QTY KG CP ASE QQ TYTY 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 4500 3000 3000 7500 7500 4500 4500 3000 3000 2000 2000 2000 4500 4500 3000 2000 Note: Please use Series and Size No. when ordering: Example: 1/16 x 1/2 Brass Cotter Pins Series Size No. 5680 -043 ND8 January, 2009 SSIZE SIZE IZE IZE NN ON O OO - 174 - 176 - 178 - 189 - 191 - 193 - 195 - 197 - 199 - 200 - 202 - 204 - 206 - 208 - 309 - 311 - 313 - 315 - 316 - 318 D DIAMETER IAMETER DIAMETER PKG xx L LENGTH ENGTH ENGTH x LENGTH QTY 5/32X2 5/32X2 1/2 5/32X3 3/16X1/2 3/16X3/4 3/16X1 3/16X1 1/4 3/16X1 1/2 3/16X1 3/4 3/16X2 3/16X2 1/2 3/16X3 3/16X3 1/2 3/16X4 1/4X1 1/4X1 1/4 1/4X1 1/2 1/4X1 3/4 1/4X2 1/4X2 1/2 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 PKG KG KG CPASE QTY TY QQ TYTY 2000 2000 2000 4500 2250 2250 2250 1500 1000 1000 1000 800 800 800 1000 1000 1000 1000 800 800 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited Brass Series 5691 SS IZE IZE NN OO - 304 - 306 - 308 - 310 - 311 - 314 - 316 THREADED ROD - 3 FOOT D DIAMETER IAMETER xx LLENGTH ENGTH PKG PKG QTY QTY 4-40X3' 6-32X3' 8-32X3' 10-24X3' 10-32X3' UNF 1/4-20X3' 5/16-18X3' 1 1 1 1 1 1 1 Note: Please use Series and Size No. when ordering: Example: 4 -40 x 3' Brass Threaded Rod - 3 Foot Series Size No. 5691 -304 SIZE IZE SSIZE IZE O NN ON OO - 318 - 322 - 324 - 326 - 328 - 330 PKG PKG KG QTYQTY TY DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH 3/8-16X3' 1/2-13X3' 5/8-11X3' 3/4-10X3' 7/8-9X3' 1-8X3' 1 1 1 1 1 1 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 ND9 Brass FLAT HEAD SLOT MACHINE SCREWS Series 5702 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO D DIAMETER IAMETER DIAMETER PKG xx L LENGTH ENGTH ENGTH x LENGTH QTY 10-24 4-40 - 039 - 040 - 041 - 043 - 044 - 045 - 047 4-40X1/4 4-40X5/16 4-40X3/8 4-40X1/2 4-40X5/8 4-40X3/4 40-40X1 - 082 - 083 - 084 - 085 - 087 - 088 - 089 - 091 - 093 - 095 - 098 6-32X3/16 6-32X1/4 6-32X5/16 6-32X3/8 6-32X1/2 6-32X5/8 6-32X3/4 6-32X1 6-32X1 1/4 6-32X1 1/2 6-32X2 - 133 - 134 - 135 - 137 - 138 - 139 - 140 - 141 - 143 - 145 - 147 - 148 8-32X1/4 8-32X5/16 8-32X3/8 8-32X1/2 8-32X5/8 8-32X3/4 8-32X7/8 8-32X1 8-32X1 1/4 8-32X1 1/2 8-32X1 3/4 8-32X2 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 7500 4500 4500 3000 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 4500 4500 3000 2000 2000 6-32 8-32 Note: Please use Series and Size No. when ordering: Example: 4-40 x 1/4" Brass Flat Head Slot Machine Screws Series Size No. 181 -039 ND10 January, 2009 PKG KG CPASE QTY TY QQ TYTY - 187 - 189 - 190 - 191 - 192 - 193 - 195 - 197 - 199 - 200 - 202 - 204 10-24X3/8 10-24X1/2 10-24X5/8 10-24X3/4 10-24X7/8 10-24X1 10-24X1 1/4 10-24X1 1/2 10-24X1 3/4 10-24X2 10-24X2 1/2 10-24X3 - 214 - 215 - 217 - 218 - 219 - 220 - 221 - 223 - 225 - 227 - 228 - 230 10-32X5/16 10-32X3/8 10-32X1/2 10-32X5/8 10-32X3/4 10-32X7/8 10-32X1 10-32x1 1/4 10-32x1 1/2 10-32X1 3/4 10-32X2 10-32X2 1/2 - 246 - 248 - 250 12-24X1/2 12-24X3/4 12-24X1 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 3000 3000 2000 2000 2000 1200 800 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 4500 3000 3000 2000 2000 2000 1200 100 100 100 4500 4500 3000 10-32 12-24 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited Brass FLAT HEAD SLOT MACHINE SCREWS Series 5702 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON OO 1/4-20 - 303 - 305 - 306 - 307 - 308 - 309 - 311 - 313 - 315 - 316 - 318 - 320 1/4-20X3/8 1/4-20X1/2 1/4-20X5/8 1/4-20X3/4 1/4-20X7/8 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2 1/4-20X1 3/4 1/4-20X2 1/4-20X2 1/2 1/4-20X3 D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH x LENGTH QTY PKG KG KG CPASE QTY TY QQ TYTY 5/16-18 100 100 100 100 100 100 100 100 100 100 100 100 4500 4500 4500 4500 4500 3000 2000 1600 1600 1200 800 600 Note: Please use Series and Size No. when ordering: Example: 1/4 -20 x 3/8 Brass Flat Head Machine Screws Series Size No. 181 -303 - 440 - 442 - 444 - 446 - 448 - 450 - 451 - 453 - 455 5/16-18X1/2 5/16-18X3/4 5/16-18X1 5/16-18X1 1/4 5/16-18X1 1/2 5/16-18X1 3/4 5/16-18X2 5/16-18X2 1/2 5/16-18X3 - 487 - 489 - 491 - 493 - 495 - 496 3/8-16X3/4 3/8-16X1 3/18-16X1 1/4 3/8-16X1 1/2 3/8-16X1 3/4 3/8-16X2 50 50 50 50 50 50 50 25 25 1600 1600 1600 1600 800 600 600 600 600 50 50 50 50 50 50 800 1000 800 600 300 400 3/8-16 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 ND11 Brass ROUND HEAD SLOT MACHINE SCREWS Series 5703 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO DIAMETER IAMETER DIAMETER PKG D LENGTH ENGTH x LENGTH QTY xx L ENGTH 8-32 2-56 - 015 - 017 - 019 - 021 2-56X1/4 2-56X3/8 2-56X1/2 2-56X3/4 - 038 - 039 - 040 - 041 - 043 - 045 - 046 - 047 - 049 - 051 4-40X3/16 4-40X1/4 4-40X5/16 4-40X3/8 4-40X1/2 4-40X3/4 4-40X7/8 4-40X1 4-40X1 1/4 4-40X1 1/2 - 082 - 083 - 084 - 085 - 087 - 088 - 089 - 091 - 093 - 095 - 098 6-32X3/16 6-32X1/4 6-32X5/16 6-32X3/8 6-32X1/2 6-32X5/8 6-32X3/4 6-32X1 6-32X1 1/4 6-32X1 1/2 6-32X2 100 100 100 100 7500 7500 7500 7500 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 7500 7500 4500 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 7500 7500 7500 4500 3000 2000 4-40 6-32 Note: Please use Series and Size No. when ordering: Example: 2-56 x 1/4 Brass Round Head Slot Machine Screws Series Size No. 180 -015 ND12 January, 2009 PKG KG KG CPASE QTY TY QQ TYTY - 133 - 134 - 135 - 137 - 138 - 139 - 140 - 141 - 143 - 145 - 148 - 150 8-32X1/4 8-32X5/16 8-32X3/8 8-32X1/2 8-32X5/8 8-32X3/4 8-32X7/8 8-32X1 8-32X1 1/4 8-32X1 1/2 8-32X2 8-32X2 1/2 - 185 - 186 - 187 - 188 - 189 - 190 - 191 - 192 - 193 - 195 - 197 - 199 - 200 - 202 - 204 10-24X1/4 10-24X5/16 10-24X3/8 10-24X7/16 10-24X1/2 10-24X5/8 10-24X3/4 10-24X7/8 10-24X1 10-24X1 1/4 10-24X1 1/2 10-24X1 3/4 10-24X2 10-24X2 1/2 10-24X3 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 4500 4500 4500 3000 2000 2000 1600 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 7500 4500 4500 4500 3000 3000 2000 2000 1600 1200 800 10-24 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited Brass ROUND HEAD SLOT MACHINE SCREWS Series 5703 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO 10-32 - 214 - 215 - 216 - 217 - 218 - 219 - 220 - 221 - 223 - 225 - 227 - 228 - 230 10-32X5/16 10-32X3/8 10-32X7/16 10-32X1/2 10-32X5/8 10-32X3/4 10-32X7/8 10-32X1 10-32X1 1/4 10-32X1 1/2 10-32X1 3/4 10-32X2 10-32X2 1/2 DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH PKG KG KG CPASE QTY QQ TYTY 1/4-20 100 100 100 100 100 100 100 100 100 100 100 100 100 7500 7500 7500 7500 4500 4500 4500 3000 3000 2000 2000 1600 1600 - 303 - 305 - 306 - 307 - 308 - 309 - 311 - 313 - 315 - 316 - 317 - 318 - 320 1/4-20X3/8 1/4-20X1/2 1/4-20X5/8 1/4-20X3/4 1/4-20X7/8 1/4-20X1 1/4-20X1 1/4 1/4-20X1 1/2 1/4-20X1 3/4 1/4-20X2 1/4-20X2 1/4 1/4-20X2 1/2 1/4-20X3 - 442 - 444 - 446 - 448 - 451 - 453 - 455 5/16-18X3/4 5/16-18X1 5/16-18X1 1/4 5/16-18X1 1/2 5/16-18X2 5/16-18X2 1/2 5/16-18X3 - 487 - 489 - 491 - 493 - 495 - 496 - 498 3/8-16X3/4 3/8-16X1 3/8-16X1 1/4 3/8-16X1 1/2 3/8-16X1 3/4 3/8-16X2 3/8-16X2 1/2 100 100 100 100 100 100 100 100 100 100 100 100 100 4500 3000 3000 3000 2000 2000 1600 1600 1600 1200 1200 800 800 50 50 50 50 50 25 25 1000 800 800 600 600 300 300 50 50 50 50 50 50 25 600 600 600 300 300 300 200 5/16-18 12-24 - 246 - 248 - 250 - 254 12-24X1/2 12-24X3/4 12-24X1 12-24X1 1/2 100 100 100 100 4500 3000 3000 2000 3/8-16 Note: Please use Series and Size No. when ordering: Example: 10-32 x 5/16 Brass Round Head Slot Machine Screws Series Size No. 180 -214 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 ND13 Brass FLAT HEAD SLOT WOOD SCREWS Series 189 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO No.4 Diameter - 041 - 043 - 044 - 045 - 047 4X3/8 4X1/2 4X5/8 4X3/4 4X1 - 063 - 064 - 065 - 067 5X1/2 5X5/8 5X3/4 5X1 - 087 - 088 - 089 - 091 - 093 - 095 6X1/2 6X5/8 6X3/4 6X1 6X1 1/4 6X1 1/2 100 100 100 100 100 7500 7500 7500 7500 7500 100 100 100 100 7500 7500 7500 7500 100 100 100 100 100 100 7500 7500 7500 7500 4500 4500 No.6 Diameter No.7 Diameter 7X3/4 7X1 7X1 1/4 7X1 1/2 100 100 100 100 7500 4500 4500 3000 Note: Please use Series and Size No. when ordering: Example: 4 x 3/8 Brass Flat Head Slot Wood Screws Series Size No. 189 -041 ND14 January, 2009 PKG KG CPASE QTY TY QQ TYTY No.8 Diameter No.5 Diameter - 113 - 115 - 117 - 119 D DIAMETER IAMETER DIAMETER PKG xx L LENGTH ENGTH ENGTH x LENGTH QTY - 137 - 138 - 139 - 141 - 143 - 145 - 148 - 150 8X1/2 8X5/8 8X3/4 8X1 8X1 1/4 8X1 1/2 8X2 8X2 1/2 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 3000 2000 1600 100 100 100 100 100 100 100 100 4500 4500 3000 2000 2000 1600 1200 800 100 100 100 100 100 100 3000 2000 2000 1600 800 800 No.10 Diameter - 191 - 193 - 195 - 197 - 199 - 200 - 202 - 204 10X3/4 10X1 10X1 1/4 10X1 1/2 10X1 3/4 10X2 10X2 1/2 10X3 No.12 Diameter - 250 - 252 - 254 - 257 - 259 - 261 12X1 12X1 1/4 12X1 1/2 12X2 12X2 1/2 12X3 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited Brass ROUND HEAD SLOT WOOD SCREWS Series 190 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO 4X3/8 4X1/2 4X5/8 4X3/4 4X1 - 063 - 064 - 065 - 067 5X1/2 5X5/8 5X3/4 5X1 - 087 - 088 - 089 - 091 - 093 - 095 6X1/2 6X5/8 6X3/4 6X1 6X1 1/4 6X1 1/2 100 100 100 100 100 7500 7500 7500 7500 7500 100 100 100 100 7500 7500 7500 7500 100 100 100 100 100 100 7500 7500 7500 4500 4500 4500 No.5 Diameter No.6 Diameter No.7 Diameter - 113 - 115 - 117 - 119 7X1/2 7X5/8 7X3/4 7X1 PKG KG CPASE QTY TY QQ TYTY No.8 Diameter No.4 Diameter - 041 - 043 - 044 - 045 - 047 DIAMETER IAMETER DIAMETER PKG D IAMETER LENGTH ENGTH x LENGTH QTY xx L ENGTH 100 100 100 100 7500 4500 7500 4500 Note: Please use Series and Size No. when ordering: Example: 4 x 3/8 Brass Round Head Slot Wood Screws Series Size No. 190 -041 - 137 - 138 - 139 - 141 - 143 - 145 - 148 - 150 8X1/2 8X5/8 8X3/4 8X1 8X1 1/4 8X1 1/2 8X2 8X2 1/2 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 3000 2000 1600 100 100 100 100 100 100 100 100 4500 3000 3000 2000 1600 1600 1200 800 100 100 100 100 100 100 3000 2000 2000 1600 800 800 No.10 Diameter - 191 - 193 - 195 - 197 - 199 - 200 - 202 - 204 10X3/4 10X1 10X1 1/4 10X1 1/2 10X1 3/4 10X2 10X2 1/2 10X3 No.12 Diameter - 250 - 252 - 254 - 257 - 259 - 261 12X1 12X1 1/4 12X1 1/2 12X2 12X2 1/2 12X3 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 ND15 Brass FLAT HEAD SQUARE SOCKET WOOD SCREWS Series 203 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO No.4 Diameter - 041 - 043 - 044 - 045 - 047 4X3/8 4X1/2 4X5/8 4X3/4 4X1 - 063 - 064 - 065 - 067 5X1/2 5X5/8 5X3/4 5X1 - 087 - 088 - 089 - 091 - 093 - 095 6X1/2 6X5/8 6X3/4 6X1 6X1 1/4 6X1 1/2 7500 7500 7500 7500 7500 100 100 100 100 7500 7500 7500 7500 100 100 100 100 100 100 7500 7500 7500 7500 4500 4500 100 100 100 100 100 7500 7500 4500 4500 3000 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 3000 2000 1600 No.6 Diameter No.7 Diameter 7X5/8 7X3/4 7X1 7X1 1/4 7X1 1/2 - 137 - 138 - 139 - 141 - 143 - 145 - 148 - 150 8X1/2 8X5/8 8X3/4 8X1 8X1 1/4 8X1 1/2 8X2 8X2 1/2 PKG KG KG CPASE QTY TY QQ TYTY No.9 Diameter 100 100 100 100 100 No.5 Diameter - 112 - 113 - 115 - 117 - 119 D DIAMETER IAMETER DIAMETER PKG xx L LENGTH ENGTH ENGTH x LENGTH QTY - 167 - 169 - 171 9X1 9X1 1/4 9X1 1/2 - 191 - 193 - 195 - 197 - 199 - 200 - 202 - 204 10X3/4 10X1 10X1 1/4 10X1 1/2 10X1 3/4 10X2 10X2 1/2 10X3 100 100 100 4500 3000 2000 100 100 100 100 100 100 100 100 4500 4500 3000 2000 2000 1600 1200 800 100 100 100 100 100 100 3000 2000 2000 1600 800 800 No.10 Diameter No.12 Diameter - 250 - 252 - 254 - 257 - 259 - 261 12X1 12X1 1/4 12X1 1/2 12X2 12X2 1/2 12X3 No.8 Diameter Note: Please use Series and Size No. when ordering: Example: 4 x 3/8 Brass Flat Head Square Socket Wood Screws Series Size No. 203 -041 ND16 January, 2009 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited Brass ROUND HEAD SQUARE SOCKET WOOD SCREWS Series 204 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO No.4 Diameter - 041 - 043 - 044 - 045 - 047 4X3/8 4X1/2 4X5/8 4X3/4 4X1 - 063 - 064 - 065 - 067 5X1/2 5X5/8 5X3/4 5X1 - 087 - 088 - 089 - 091 - 093 - 095 6X1/2 6X5/8 6X3/4 6X1 6X1 1/4 6X1 1/2 D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH ENGTH x LENGTH QTY PKG KG KG CPASE QTY QQ TYTY No.10 Diameter 100 100 100 100 100 7500 7500 7500 7500 7500 100 100 100 100 7500 7500 7500 7500 100 100 100 100 100 100 7500 7500 7500 4500 4500 4500 100 100 100 100 100 100 100 100 7500 7500 7500 4500 4500 3000 2000 1600 No.5 Diameter No.6 Diameter - 191 - 193 - 195 - 197 - 199 - 200 - 202 - 204 10X3/4 10X1 10X1 1/4 10X1 1/2 10X1 3/4 10X2 10X2 1/2 10X3 100 100 100 100 100 100 100 100 4500 3000 3000 2000 1600 1600 1200 800 100 100 100 100 100 100 3000 2000 2000 1600 800 800 No.12 Diameter - 250 - 252 - 254 - 257 - 259 - 261 12X1 12X1 1/4 12X1 1/2 12X2 12X2 1/2 12X3 No.8 Diameter - 137 - 138 - 139 - 141 - 143 - 145 - 148 - 150 8X1/2 8X5/8 8X3/4 8X1 8X1 1/4 8X1 1/2 8X2 8X2 1/2 Note: Please use Series and Size No. when ordering: Example: 4 x 3/8 Brass Round Head Square Socket Wood Screws Series Size No. 204 -041 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 ND17 Aluminum Series 5855 SS IZE IZE NN OO - 010 - 014 - 016 SDCREW IAMETER OR B x OLT LENGTH SIZE No.10 1/4 5/16 FLAT WASHERS PKG QTY KG CP ASE QQ TYTY 10 10 10 100 100 100 SIZE IZE SSIZE O NN ON OO DCREW IAMETER DIAMETER PKG S IAMETER OR x OLT LENGTH x LENGTH QTY B ENGTH SIZE - 018 - 022 3/8 1/2 Note: Please use Series and Size No. when ordering: Example: No.10 Aluminum Flat Washers Series Size No. 5855 -010 5868 - 043 - 087 - 089 - 091 - 139 - 141 - 143 - 145 D DIAMETER IAMETER xx LLENGTH ENGTH 4x1/2 6x1/2 6x3/4 6x1 8x3/4 8x1 8x1-1/4 8x1-1/2 FLAT HEAD SLOT SCREWS PKG QTY 100 100 100 100 100 100 100 100 KG CP ASE QQ TYTY 7500 7500 7500 7500 7500 4500 4500 3000 SSIZE SIZE IZE NN ON O OO D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH ENGTH x LENGTH QTY - 193 - 195 - 197 - 250 - 252 - 254 - 257 10x1 10x1-1/4 10x1-1/2 12x1 12x1-1/4 12x1-1/2 12x2 5869 - 043 - 089 - 137 - 139 - 141 - 145 - 191 4x1/2 6x3/4 8x1/2 8x3/4 8x1 8x1-1/2 10x3/4 100 100 50 50 50 50 50 PKG KG KG CPASE QTY TY QQ TYTY 4500 3000 2000 3000 2000 2000 2000 Stock Sizes are shown in HEAVY type. Aluminum Series D DIAMETER IAMETER xx LLENGTH ENGTH 100 100 Stock Sizes are shown in HEAVY type. Note: Please use Series and Size No. when ordering: Example: 4 x 1/2 Aluminum Flat Head Slot Screws Series Size No. 5868 -043 SS IZE IZE NN OO 10 10 Aluminum Series SS IZE IZE NN OO PKG KG KG CPASE QTY TY QQ TYTY ROUND HEAD SLOT SCREWS PKG QTY 100 100 100 100 100 100 100 KG CP ASE QQ TYTY 7500 7500 7500 4500 4500 3000 4500 Note: Please use Series and Size No. when ordering: Example: 4 x 1/2 Aluminum Round Head Slot Screws Series Size No. 5869 -043 SIZE IZE SSIZE O NN ON OO DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH - 193 - 195 - 200 - 202 - 254 10x1 10x1-1/4 10x2 10x2-1/2 12x1-1/2 100 100 100 100 50 PKG KG KG CPASE QTY TY QQ TYTY 3000 3000 1600 1600 2000 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NE1 Aluminum Series 5870 SS IZE IZE NN OO - 043 - 089 - 139 D DIAMETER IAMETER xx LLENGTH ENGTH 4x1/2 6x3/4 8x3/4 OVAL HEAD SLOT SCREWS PKG QTY 100 100 100 KG CP ASE QQ TYTY 7500 7500 4500 SSIZE SIZE IZE IZE NN ON O OO D DIAMETER IAMETER DIAMETER PKG xx L LENGTH ENGTH ENGTH x LENGTH QTY - 141 - 193 8x1 10x1 Note: Please use Series and Size No. when ordering: Example: 4 x 1/2 Aluminum Oval Head Slot Screws Series Size No. 5870 -043 SS IZE IZE NN OO - 137 - 139 - 141 D DIAMETER IAMETER xx LLENGTH ENGTH 8x1/2 8x3/4 8x1 Stock Sizes are shown in HEAVY type. PAN HEAD PHILLIPS TAPPING SCREWS PKG QTY 100 100 100 KG CP ASE QQ TYTY 7500 4500 4500 SSIZE SIZE IZE IZE NN ON O OO D DIAMETER IAMETER DIAMETER PKG xx L LENGTH ENGTH ENGTH x LENGTH QTY - 189 - 191 - 193 10x1/2 10x3/4 10x1 Note: Please use Series and Size No. when ordering: Example: 8 x 1/2 Aluminum Pan Head Phillips Tapping Screws Series Size No. 5871 -137 SS IZE IZE NN OO - 137 - 139 - 141 - 189 D DIAMETER IAMETER xx LLENGTH ENGTH 8x1/2 8x3/4 8x1 10x1/2 January, 2009 7500 4500 3000 Stock Sizes are shown in HEAVY type. HEX SLOT HEAD TAPPING SCREWS PKG QTY 100 100 100 100 KG CP ASE QQ TYTY 7500 4500 4500 4500 Note: Please use Series and Size No. when ordering: Example: 8 x 1/2 Aluminum Hex Slot Head Tapping Screws Series Size No. 5875 -137 NE2 100 100 100 PKG KG KG CPASE QTY TY QQ TYTY Aluminum Series 5875 4500 3000 Aluminum Series 5871 100 100 PKG KG KG CPASE QTY TY QQ TYTY SIZE IZE SSIZE IZE O NN ON OO DIAMETER IAMETER DIAMETER PKG D LENGTH ENGTH x LENGTH QTY xx L ENGTH - 191 - 193 - 195 10x3/4 10x1 10x1-1/4 100 100 100 PKG KG KG CPASE QTY TY QQ TYTY 4500 3500 2000 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited Aluminum Series 142 ROUND TUBING SS IZE IZE NN OO - 338 - 340 - 344 - 348 O DUTSIDE IAMETERDIA. xx LLENGTH ENGTH PP KG KG QQ TYTY 3/4X3' 1X3' 1-1/4X3' 3/4X4' 3 3 2 3 SIZE IZE SSIZE IZE O NN ON OO DUTSIDE IAMETER D O IAMETER DIAMETER IA. PKG ENGTH x LENGTH QTY xx LLENGTH ENGTH - 349 - 350 - 354 3/4X6' 1X6' 1-1/4X6' Note: Please use Series and Size No. when ordering: Example: 3/4 x 3' Aluminum Round Tubing Series Size No. 142 -338 2 2 2 Stock Sizes are shown in HEAVY type.. Aluminum Series 142 PKG PKG KG QTYQTY TY S S SQUARE TUBING SS IZE IZE NN OO - 436 - 438 W DIAMETER ALL X 'S' xx LLENGTH ENGTH PP KG KG QQ TYTY 1/16X3/4X4' 1/16X1X4' 3 3 SIZE IZE SSIZE IZE O NN ON OO DIAMETER DIAMETER PKG W IAMETER ALL X 'S' ENGTH x LENGTH QTY xx LLENGTH ENGTH - 440 - 442 1/16X3/4X6' 1/16X1X6' Note: Please use Series and Size No. when ordering: Example: 1/16 x 3/4 x 4'Aluminum Square Tubing Series Size No. 142 -436 PKG PKG KG QTYQTY TY 2 2 Stock Sizes are shown in HEAVY type. Aluminum Series 142 FLATS SS IZE IZE NN OO - 640 - 642 - 646 - 648 - 660 THICKNESS DIAMETERX WIDTH x LENGTH x LENGTH KG PP KG QQ TYTY 1/8X3/4X3' 1/8X1X3' 1/8X1-1/2X3' 1/8X2X3' 1/8X3/4X4' 3 3 3 3 3 Note: Please use Series and Size No. when ordering: Example:1/8 x 3/4 x 3'Aluminum Flats Series Size No. 142 -640 SSIZE SIZE IZE IZE THICKNESS DIAMETER IAMETER D X IAMETER WIDTH PKG NN ON O OO x LxENGTH LENGTH ENGTH x LENGTH QTY - 662 - 666 - 680 - 682 - 686 1/8X1X4' 1/8X1-1/2X4' 1/8X3/4X6' 1/8X1X 6' 1/8X1-1/2X6' PKG PKG KG QTYQTY TY 3 3 3 3 3 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NE3 Aluminum Series 142 ANGLES X WIDTH SS IZE IZE THICKNESS DIAMETER x LENGTH NN OO x LENGTH - 700 - 702 - 706 - 708 - 720 - 721 - 722 PP KG KG QQ TYTY 1/8X3/4X3' 1/8X1X3' 1/8X1-1/2X3' 1/8X2X3' 1/16X3/4X4' 1/8X3/4X4' 1/8X1X4' SSIZE SIZE IZE IZE THICKNESS DIAMETERD X IAMETER PKG NN ON O OO WIDTH x LENGTH ENGTH x LENGTH x LENGTH QTY - 726 - 740 - 742 - 746 - 778 - 780 - 790 3 3 3 3 3 3 3 1/8X1-1/2X4' 1/8X3/4X6' 1/8X1X6' 1/8X1-1/2X6' 1/16X3/4X3' 1/16X1X3' 1/8X1/2X3/4X3' Note: Please use Series and Size No. when ordering: Example: 1/8 x 3/4 x3' Aluminum Angles Series Size No. 142 -700 PKG PKG KG QTYQTY TY 3 3 3 3 3 3 3 Stock Sizes are shown in HEAVY type. Diameter Aluminum Series 142 TRACK SETS C&D (Bottom Tracks) Length A&B (Bottom Tracks) SIZE NO DIAMETER OF CHANNEL TOP TRACK SIZE DIAMETER x LENGTH WIDTH A NO x LENGTH PKG BOTTOM TRACK QTYWIDTH A TOP TRACK WIDTH C BOTTOM TRACK WIDTH D PKG QTY - 750 - 751 - 752 - 756 1/8X4' 1/4X4' 1/2X4' 1/8X6' 1.02 1.25 1.75 1.02 1.02 1.25 1.75 1.02 0.52 0.52 0.52 0.52 0.27 0.27 0.27 0.27 1 1 1 1 - 757 - 758 1/4X6' 1/2X6' 1.25 1.75 1.25 1.75 0.52 0.52 0.27 0.27 1 1 Stock Sizes are shown in HEAVY type. Note: Please use Series and Size No. when ordering: Example:1/8 x 4' Aluminum Track Sets Series Size No. 142 -750 Aluminum Series 142 ROUND RODS SS IZE IZE NN OO - 808 - 812 - 814 - 820 ODUTSIDE DIA. IAMETER xxLLENGTH ENGTH PP KG KG QQ TYTY 3/8X3' 1/2X3' 5/8X3' 3/8X4' 5 5 3 5 Note: Please use Series and Size No. when ordering: Example:3/8 x 3' Aluminum Round Rods Series Size No. 142 -808 January, 2009 NE4 SSIZE SIZE IZE IZE NN ON O OO ODUTSIDE IAMETER DIAMETER IA. PKG xxLLENGTH ENGTH ENGTH x LENGTH QTY - 822 - 828 - 832 1/2X4' 3/8X6' 1/2X6' PKG PKG KG QTYQTY TY 5 3 3 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited 18.8 Stainless Steel METRIC HEX HEAD CAP SCREWS Series 5900 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO M6 Diameter - 305 - 306 - 307 - 309 - 310 - 311 - 312 - 315 - 316 - 317 M6-1.0X12 M6-1.0X16 M6-1.0X20 M6-1.0X25 M6-1.0X30 M6-1.0X35 M6-1.0X40 M6X1.0X45 M6-1.0X50 M6-1.0X60 M8X1.25X12 M8X1.25X16 M8X1.25X20 M8X1.25X25 M8-1.25X30 M8X1.25X35 M8-1.25X40 M8-1.25X45 M8-1.25X50 M8-1.25X60 M8-1.25X70 M8X1.25X80 PKG KG KG CPASE QTY TY QQ TYTY M10 Diameter 50 50 50 50 50 50 50 25 25 25 3750 2250 2250 1500 1500 1500 1000 1125 750 500 - 507 - 509 - 510 - 511 - 512 - 515 - 516 - 517 - 519 - 520 -522* -524* M10X1.5X20 M10X1.5X25 M10X1.5X30 M10-1.5X35 M10-1.5X40 M10-1.5X45 M10-1.5X50 M10-1.5X60 M10-1.5X70 M10-1.5X80 M10-1.5X90 M10-1.5X100 50 50 50 50 50 50 50 25 25 15 15 15 2250 1500 1000 1000 1000 1000 800 750 500 450 300 240 - 609 - 610 - 611 - 612 - 615 - 616 - 617 - 619 - 620 - 622 - 624 M12X1.75X25 M12-1.75X30 M12-1.75X35 M12-1.75X40 M12-1.75X45 M12-1.75X50 M12-1.75X60 M12-1.75X70 M12-1.75X80 M12-1.75X90 M12-1.75X100 M8 Diameter - 405 - 406 - 407 - 409 - 410 - 411 - 412 - 415 - 416 - 417 - 419 - 420 D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH ENGTH x LENGTH QTY 50 50 50 50 50 25 25 10 10 10 10 10 1000 800 800 600 600 400 500 200 200 200 160 160 25 25 25 25 15 15 10 10 10 5 5 500 500 500 400 300 300 200 200 160 80 80 M12 Diameter Note: Please use Series and Size No. when ordering: Example: M6-1.0 x 12 18.8 Stainless Steel Metric Hex Head Cap Screws Series Size No. 5900 -305 Stock Sizes are shown in HEAVY type. * Indicates items - Standard thread DIN 931 Balance items fully threaded - DIN 933 H. Paulin & Co. Limited January, 2009 NF1 18.8 Stainless Steel METRIC HEX HEAD CAP SCREWS Series 5900 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SSIZE SIZE IZE IZE NN ON O OO M16 Diameter - 709 - 710 - 711 - 712 - 715 - 716 - 717 - 719 - 720 -722* -724* M16-2.0X25 M16-2.0X30 M16-2.0X35 M16-2.0X40 M16-2.0X45 M16-2.0X50 M16-2.0X60 M16-2.0X70 M16-2.0X80 M16-2.0X90 M16-2.0X100 January, 2009 PKG KG KG CPASE QTY TY QQ TYTY M20 Diameter 5 5 5 5 5 5 5 5 5 5 5 225 225 150 150 150 100 100 80 80 80 60 - 815 - 816 - 817 - 819 - 820 -822* -824* -826* -828* -830* Note: Please use Series and Size No. when ordering: Example: M16-2.0 x 25 18.8 Stainless Steel Metric Hex Head Cap Screws Series Size No. 5900 -709 NF2 D DIAMETER IAMETER DIAMETER PKG xx L LENGTH ENGTH ENGTH x LENGTH QTY M20-2.5X45 M20-2.5X50 M20-2.5X60 M20-2.5X70 M20-2.5X80 M20-2.5X90 M20-2.5X100 M20-2.5X120 M20-2.5X130 M20-2.5X150 5 5 5 5 5 5 5 5 5 5 100 100 80 40 40 40 40 30 30 30 Stock Sizes are shown in HEAVY type. * Indicates items - Standard thread DIN 931 Balance items fully threaded - DIN 933 H. Paulin & Co. Limited Series 5901 SS IZE IZE NN OO - 008 - 010 - 014 - 016 18.8 Stainless Steel METRIC FINISHED HEX NUTS B DOLT IAMETER DIAMETER (xMML)ENGTH M4-0.7 M5-0.8 M6-1.0 M8-1.25 PKG QTY 50 50 50 50 KG CP ASE QQ TYTY 3750 3750 3750 2250 SIZE IZE SSIZE O NN ON OO DOLT IAMETER DIAMETER PKG B IAMETER DIAMETER x LENGTH QTY (xMML)ENGTH ENGTH - 018 - 022 - 024 - 026 M10-1.5 M12-1.75 M16-2.0 M20-2.5 PKG KG KG CPASE QTY TY QQ TYTY 50 25 5 5 1500 1125 225 225 Stock Sizes are shown in HEAVY type. Note: Please use Series and Size No. when ordering: Example: M4 -0.7 18.8 Stainless Steel Metric Finished Hex Nuts Series Size No. 5901 -008 Series 5904 SS IZE IZE NN OO - 014 - 016 - 018 - 022 B DOLT IAMETER DIAMETER (xMML)ENGTH M6-1.0 M8-1.25 M10-1.5 M12-1.75 -DIN 934 18.8 Stainless Steel METRIC NYLON INSERT STOP NUTS PKG QTY 50 50 50 25 KG CP ASE QQ TYTY 3750 2250 1750 750 SIZE IZE SSIZE O NN ON OO DOLT IAMETER DIAMETER PKG B IAMETER DIAMETER x LENGTH QTY (xMML)ENGTH ENGTH - 024 - 026 - 028 M16-2.0 M20-2.5 M24-3.0 Note: Please use Series and Size No. when ordering: Example: M6-1.0 18.8 Stainless Steel Metric Nylon Insert Stop Nuts Series Size No. 5904 -014 PKG KG KG CPASE QTY TY QQ TYTY 5 5 5 1500 225 225 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited -DIN 985 January, 2009 NF3 18.8 Stainless Steel Series 5908 METRIC FLAT WASHERS CREW OR DSIAMETER SIZE xBLOLT ENGTH SS IZE IZE NN OO - 214 - 216 - 218 - 222 - 224 - 226 INSIDE DIAMETER 6mm 8mm 10mm 12mm 16mm 20mm PKG QTY 6.4 8.4 10.5 13.0 17.0 21.0 OUTSIDE DIAMETER THICKNESS 12.5 17.0 21.0 24.0 30.0 37.0 1.6 1.6 2.0 2.5 3.0 3.0 5909 METRIC MEDIUM LOCK WASHERS DSIAMETER CREW OR xBLOLT ENGTH SIZE INSIDE DIAMETER 6mm 8mm 10mm 12mm 16mm 20mm PKG QTY 6.1 8.1 10.2 12.2 16.2 20.2 OUTSIDE DIAMETER THICKNESS 11.8 14.8 18.1 21.1 27.4 33.6 1.6 2.0 2.2 2.5 3.5 4.0 Note: Please use Series and Size No. when ordering: Example: 6mm 18.8 Stainless Steel Metric Medium Lock Washers Series Size No. 5909 -014 5912 50 50 50 25 5 5 CASE QTY 3750 3750 3750 1875 375 375 Stock Sizes are shown in HEAVY type. -DIN 127B METRIC THREADED ROD - 1 metre SS IZE IZE NN OO - 308 - 310 - 314 - 316 - 318 PKG QTY 18.8 Stainless Steel Series D DIAMETER IAMETER xx LLENGTH ENGTH M4-0.7 M5-0.8 M6-1.0 M8-1.25 M10-1.5 PP KG KG QQ TYTY 1 1 1 1 1 SIZE IZE SSIZE IZE O NN ON OO - 322 - 324 - 326 - 328 - 330 Note: Please use Series and Size No. when ordering: Example: M4-0.7 18.8 Stainless Steel Metric Threaded Rod - 1 Metre Series Size No. 5912 -308 NF4 3750 3750 3750 1875 375 375 18.8 Stainless Steel Series - 014 - 016 - 018 - 022 - 024 - 026 50 50 50 25 5 5 CASE QTY Stock Sizes are shown in HEAVY type. Note: Please use Series and Size No. when ordering: Example: 6mm 18.8 Stainless Steel Metric Flat Washers Series Size No. 5908 -214 SS IZE IZE NN OO PKG QTY January, 2009 DIAMETER IAMETER DIAMETER PKG D LENGTH ENGTH x LENGTH QTY xx L ENGTH M12-1.75 M16-2.0 M20-2.5 M22-2.5 M24-3.0 PKG PKG KG QTYQTY TY 1 1 1 1 1 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited -DIN 975 18.8 Stainless Steel METRIC SOCKET HEAD CAP SCREWS Series 5914 SS IZE IZE NN OO D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY KG CP ASE QQ TYTY SIZE IZE SSIZE IZE O NN ON OO M4 Diameter - 102 - 103 - 105 - 106 - 107 - 109 M4-0.7X8 M4-0.7X10 M4-0.7X12 M4-0.7X16 M4-0.7X20 M4-0.7X25 - 203 - 205 - 206 - 207 - 209 - 210 - 211 M5-0.8X10 M5-0.8X12 M5-0.8X16 M5-0.8X20 M5-0.8X25 M5-0.8X30 M5-0.8X35 - 303 - 305 - 306 - 307 - 309 - 310 - 311 - 312 M6-1.0X10 M6-1.0X12 M6-1.0X16 M6-1.0X20 M6-1.0X25 M6-1.0X30 M6-1.0X35 M6-1.0X40 - 406 - 407 - 409 - 410 - 411 - 412 - 415 - 416 - 417 - 418 M8-1.25X16 M8-1.25X20 M8-1.25X25 M8-1.25X30 M8-1.25X35 M8-1.25X40 M8-1.25X45 M8-1.25X50 M8-1.25X55 M8-1.25X60 DIAMETER IAMETER DIAMETER PKG D IAMETER LENGTH ENGTH x LENGTH QTY xx L ENGTH PKG KG KG CPASE QTY TY QQ TYTY M10 Diameter 50 50 50 50 50 50 3750 3750 3750 3750 2250 2250 50 50 50 50 50 50 50 2250 2250 2250 2250 2250 2250 2250 50 50 50 50 50 25 25 25 2250 2250 2250 2250 1500 1125 1125 1125 50 50 50 25 25 25 25 15 15 15 1500 1000 1000 750 750 500 500 300 300 300 M5 Diameter M6 Diameter M8 Diameter - 507 - 509 - 510 - 511 - 512 - 515 - 516 - 517 - 518 - 519 M10-1.5X20 M10-1.5X25 M10-1.5X30 M10-1.5X35 M10-1.5X40 M10-1.5X45 M10-1.5X50 M10-1.5X55 M10-1.5X60 M10-1.5X70 - 610 - 611 - 612 - 615 - 616 - 617 - 618 - 619 M12-1.75X30 M12-1.75X35 M12-1.75X40 M12-1.75X45 M12-1.75X50 M12-1.75X55 M12-1.75X60 M12-1.75X70 - 710 - 711 - 712 - 715 - 716 - 717 - 718 - 719 M16-2.0X30 M16-2.0X35 M16-2.0X40 M16-2.0X45 M16-2.0X50 M16-2.0X55 M16-2.0X60 M16-2.0X70 50 50 25 25 15 15 10 10 10 10 1000 1000 500 500 300 300 200 200 200 200 20 20 15 15 15 10 5 5 400 400 300 300 300 200 150 150 5 5 5 5 5 5 5 5 100 100 100 100 100 100 80 80 M12 Diameter M16 Diameter Note: Please use Series and Size No. when ordering: Example: M4-0.7 x 8 18.8 Stainless Steel Metric Socket Head Cap Screws Series Size No. 5914 -102 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited -DIN 912 January, 2009 NF5 Nylon Series 5700 SS IZE IZE NN OO - 006 - 008 - 010 - 011 HEX MACHINE SCREW NUTS B DOLT IAMETER DIAMETER IxNCHES LENGTH KG PP KG QQ TYTY 6-32 8-32 10-24 10-32 UNF 50 50 50 50 SSIZE SIZE IZE IZE NN ON O OO B DOLT IAMETER DIAMETER DIAMETER PKG IxNCHES LENGTH ENGTH x LENGTH QTY - 014 - 016 - 018 1/4-20 5/16-18 3/8-16 Note: Please use Series and Size No. when ordering: Example: 6-32 Nylon Hex Macine Screw Nuts Series Size No. 5700 -006 5701 - 006 - 008 - 010 Stock Sizes are shown in HEAVY type. WING NUTS B DOLT IAMETER DIAMETER IxNCHES LENGTH KG PP KG Q QTYTY 6-32 8-32 10-24 25 25 25 SIZE IZE SSIZE IZE N N O O NOO DOLT IAMETER DIAMETER PKG B DIAMETER x L ENGTH x LENGTH QTY INCHES ENGTH - 011 - 014 10-32 UNF 1/4-20 Note: Please use Series and Size No. when ordering: Example: 6-32 Nylon Wing Nuts Series Size No. 5701 -006 5702 - 006 - 008 - 010 ACORN NUTS B DOLT IAMETER DIAMETER IxNCHES LENGTH PKG QTY 6-32 8-32 10-24 25 25 25 SIZE IZE SSIZE IZE O NN ON OO DOLT IAMETER DIAMETER PKG B DIAMETER LENGTH x LENGTH QTY IxNCHES ENGTH - 011 - 014 10-32 UNF 14-20 PKG PKG QTYQTY 25 25 Stock Sizes are shown in HEAVY type. Nylon Series 5705 - 206 - 208 - 210 - 214 25 25 Stock Sizes are shown in HEAVY type. Note: Please use Series and Size No. when ordering: Example: 6-32 Nylon Acorn Nuts Series Size No. 5702 -006 SS IZE IZE NN OO PKG PKG KG QTYQTY TY Nylon Series SS IZE IZE NN OO 50 50 50 Nylon Series SS IZE IZE NN OO PKG PKG KG QTYQTY TY FLAT WASHERS SDCREW IAMETER OR B x OLT LENGTH SIZE PKG QTY No. 6 No.8 No.10 1/4 100 100 100 100 Note: Please use Series and Size No. when ordering: Example: No.6 Nylon Flat Washers Series Size No. 5705 -206 SIZE IZE SSIZE IZE O NN ON OO DCREW IAMETER DIAMETER PKG S OR x OLT LENGTH x LENGTH QTY B ENGTH SIZE - 216 - 218 - 222 5/16 3/8 1/2 PKG PKG QTYQTY 100 100 100 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NG1 Nylon Series 5706 COUNTERSUNK FINISHING WASHERS SS IZE IZE NN OO - 206 - 208 SDCREW IAMETER OR B xOLT LENGTH SIZE No.6 No.8 PKG QTY 100 100 SSIZE SIZE IZE IZE NN ON O OO S DCREW IAMETER IAMETER OR DIAMETER PKG B x OLT LENGTH ENGTH SIZE x LENGTH QTY - 210 - 214 No.10 1/4 Note: Please use Series and Size No. when ordering: Example:No.6 Nylon Countersunk Finishing Washers Series Size No. 5706 -206 Stock Sizes are shown in HEAVY type. Nylon Series 5715 PAN BINDING SLOT HEAD MACHINE SCREWS SS IZE IZE NN OO - 085 - 087 - 089 - 091 - 095 - 098 - 135 - 137 - 141 - 143 - 145 - 148 - 189 - 191 - 193 D DIAMETER IAMETER xx LLENGTH ENGTH 6-32x3/8 6-32X1/2 6-32x3/4 6-32X1 6-32x1-1/2 6-32x2 8-32x3/8 8-32X1/2 8-32X1 8-32x1-1/4 8-32X1 1/2 8-32x2 10-24x1/2 10-24x3/4 10-24X1 PKG QTY 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 SIZE IZE SSIZE IZE O NN ON OO DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH - 195 - 197 - 217 - 219 - 221 - 223 - 225 - 305 - 307 - 309 - 311 - 313 - 316 - 318 10-24x1-1/4 10-24X1 1/2 10-32x1/2 10-32x3/4 10-32x1 10-32x1-1/4 10-32x1-1/2 1/4-20x1/2 1/4-20x3/4 1/4-20X1 1/4-20x1-1/4 1/4-20X1 1/2 1/4-20X2 1/4-20x2-1/2 Note: Please use Series and Size No. when ordering: Example: 6-32 x 3/8 Nylon Pan Binding Slot Head Machine Screws Series Size No. 5715 -085 NG2 100 100 January, 2009 PKG QTY 50 50 50 50 50 50 50 50 50 50 50 50 50 50 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited Nylon Series 5716 SS IZE IZE NN OO - 085 - 087 - 089 - 091 - 093 - 135 - 137 - 139 - 141 - 143 - 189 - 191 FLAT SLOT HEAD MACHINE SCREWS D DIAMETER IAMETER xx LLENGTH ENGTH PKG QTY 6-32x3/8 6-32X1/2 6-32x3/4 6-32X1 6-32x1-1/4 8-32x3/8 8-32X1/2 8-32x3/4 8-32X1 8-32x1-1/4 10-24x1/2 10-24x3/4 50 50 50 50 50 50 50 50 50 50 50 50 SSIZE SIZE IZE NN ON O OO - 193 - 217 - 219 - 221 - 223 - 225 - 305 - 307 - 309 - 313 - 316 - 318 Note: Please use Series and Size No. when ordering: Example: 6-32X3/8 Nylon Flat Slot Head Machine Screws Series Size No. 5716 -085 SS IZE IZE NN OO - 085 - 087 - 089 - 091 - 135 - 137 - 139 - 141 - 189 - 191 10-24X1 10-32x1/2 10-32x3/4 10-32x1 10-32x1-1/4 10-32x1-1/2 1/4-20x1/2 1/4-20x3/4 1/4-20X1 1/4-20X1 1/2 1/4-20X2 1/4-20x2-1/2 PKG PKG QTYQTY 50 50 50 50 50 50 50 50 50 50 50 50 Stock Sizes are shown in HEAVY type. Nylon Series 5717 D DIAMETER IAMETER IAMETER DIAMETER PKG xx LLENGTH ENGTH ENGTH x LENGTH QTY KNURLED THUMB SCREWS D DIAMETER IAMETER xx LLENGTH ENGTH KG PP KG QQ TYTY 6-32x3/8 6-32x1/2 6-32x3/4 6-32x1 8x32x3/8 8-32x1/2 8-32x3/4 8-32x1 10-24x1/2 10-24x3/4 25 25 25 25 25 25 25 25 25 25 Note: Please use Series and Size No. when ordering: Example: 6-32X3/8 Nylon Knurled Thumb Screws Series Size No. 5717 -085 SIZE IZE SSIZE O NN ON OO - 193 - 195 - 200 - 305 - 307 - 309 - 313 DIAMETER IAMETER DIAMETER PKG D IAMETER ENGTH x LENGTH QTY xx LLENGTH ENGTH 10-24x1 10-24x1-1/4 10-24x2 1/4-20x1/2 1/4-20x3/4 1/4-20x1 1/4-20x1-1/2 PKG PKG KG QTYQTY TY 25 25 25 25 25 25 25 Stock Sizes are shown in HEAVY type. H. Paulin & Co. Limited January, 2009 NG3 Non‐Ferrous Chemical & Mechanical Properties *Refer to IFI B152 ‐B153 for more information Composition, % maximum except as shown Alloy Phophorus Sulfur Silicon Carbon Chromium Nickel Copper Manganese Molybdenum Other Compositions Information Appoximate Rockwell Hardness Approx Approx Tensile Yeild Strength Strength 300 SERIES 18-8 Stainless: Non-magnetic, favourable corrosion resistance in comparison to other stainless alloys. Not hardenable with heat, highher temperatures provide greater strength. Ninety percent of Stainless fasteners sold in North America are 300 series. 300 Series (18.8 Stainless) 0.045% .03 to 15% H. Paulin & Co. Limited 1% .03 to .05% 17 to 19% 8 to 10.5% 302 Series 0.045% 0.03% 1% 0.15% 17 to 19% 8 to 10% 302HQ and XM7 Series 0.045% 0.03% 1% 0.03% 17 to 19% 8 to 10% 303 Series 0.02% .15 min 1% 0.15% 17 to 19% 8 to 10% 2% 304 & 304L Series 0.45% 0.03% 1% 0.08% 18 to 20% 8 to 10.5% 305 Series 0.05% 0.03% 1% 0.12% 17 to 19% 316 Series 0.05% 0.03% 1% 0.08% 16 to 18% 2% Most commonly used for nonmagnetic stainless fasteners. B85-95 80,000 to 80,000 to 90,000 150,000 2% Used in most w ire applications such as cables, screens, springs,etc. B85-95 90,000 to 50,000 to 125,000 70,000 2% Commonly used for machine screw s, smaller nuts, etc. B85-95 80,000 to 40,000 to 140,000 90,000 Provides greater machineability for products including larger nuts. Not reccomended for cold forming . B85-95 90,000 to 125,000 2% Typically used for all hex head cap screw s and flat w ashers. B85-95 85,000 to 40,000 to 150,000 70,000 10.5 to 13% 2% Ensures parts are nonmagnetic and low ers w ork hardening during cold forming due to high nickel content. B85-95 80,000 to 40,000 to 140,000 90,000 10 to 14% 2% Increased w elding capacity due to its low carbon content 40,000 Min. 80,000 to 50,000 to 120,000 140,000 0 to 4% 3 to 4% .60 max 2 to 3% 40,000 400 SERIES: Magnetic, less corrosive in comparison to other stainless alloys. Used in higher temperatures up to approx. 593.3oC, Ten percent of Stainlless fasteners sold in North America are 400 Series. 410 Series 0.04% 0.03% 1% 0.15% 11.5 to 13.5% 420 Series 0.04% 0.03% 1% .30 to 15% 12 to 14% 1% 1% Increased strength is achieved due to higher carbon content. 410 is the most popular series as it is used in high strength conditions. Increased strength is achieved due to higher carbon content then other 400 series therefore decreasing corrosion ressistance. C34 180,000 heat treated 150,000 heat treated C45 250,000 heat treated 200,000 heat treated Brass, Bronze & Copper SERIES: Non-magnetic, Brass and Bronze Series are considered low strength, provide greater electrical and thermal conductivity, and have greater corrosion resistance. January, 2009 270 Brass Series 65% 360 Brass Series 61.50% Commercial Brass 60-65% NZ1 Bronze Alloy 651 Series Bronze Alloy 655 Series 2% 3.8% 0.06% 35% Zinc Excellent for cold forming due to its high copper content. Typically used for screw 3% Lead and machine parts as they have remainder Zinc greater machineability. 35%-40% Zinc. The material becomes stronger as copper content decreases. .05 to .15% Better for cold forming w hen Lead copper content increases. 96% min 0.07% 94.8% min 1.5% 1.5% .05% 1.5% .05% Zinc, Lead Zinc, Lead B65 70,000 45,000 B55 50,000 30,000 B60 55,000 35,000 Typical for hex head cap screw s. B70 to B75 Commonly used in hot forged fasteners. B70 to B75 70,000 to 35,000 to 80,000 45000 70,000 to 35,000 to 80,000 45000 NZ2 Non‐Ferrous Chemical & Mechanical Properties *Refer to IFI B152 ‐B153 for more information Composition, % maximum except as shown Alloy January, 2009 Phophorus Sulfur Commercial Bronze Silicon Carbon Chromium 2 to 4% Nickel Copper Manganese Molybdenum 94 to 96% Other Compositions Information Appoximate Rockwell Hardness Approx Approx Tensile Yeild Strength Strength .05 to .8% Lead, .05 to 1.5% Zinc. Greater machineability due to its lead content. B70 to B75 70,000 to 35,000 to 80,000 45000 Aluminum Series: non-magnetic, weighs one third when compared to steel and has greater electrical conductivity. High strenngth to weight ratio. H. Paulin & Co. Limited Aluminum 2024 Series 0.5% 0.1% 3.8 to 4.9% .3 to 9% Aluminum T-6 Heat Treated .4 to .8% .04 to .35% .15 to 4% 0.15% Aluminum 7075T73 Heat Treated 1.2 to 1.8% Mag. 0.15% Titanium 0.5% Iron. 0.25% Zinc. Remaining Aluminum 0.8 to 1.2% Mag. 0.15% Titanium 0.7% Iron. 0.25% Zinc. Remaining Aluminum 2.1 to 2.9% Mag. 0.2% Titanium 0.5% Iron. 5.1 to 6.1% Zinc. Remaining Aluminum Most common application of all aluminum alloys. Typically used for most hex head cap screw s and flat w ashers. 55,000 to 70,000 B70 to B85 heat treated heat treated 40,000 heat treated Typically used for all hex nuts. B40 to B50 heat treated 37,000 to 52,000 heat treated 30,000 heat treated Contains the highest percentage of Zinc and magnesium w hen comparing to other aluminum series. B80 to B90 heat treated 60,000 to 75,000 heat treated 50,000 heat treated Washer Dimensions Part No. 5057‐394 5057‐395 5057‐396 5057‐398 5057‐400 5908‐214 5908‐216 5908‐218 5908‐222 5908‐224 5908‐226 Screw or Bolt Outside Size Inside Diameter Diameter Fender Washers 18.8 Stainless Steel #10 0.203 1ʺ 1/4 0.281 1 1/4ʺ 5/16 0.343 1 1/2ʺ 3/8 0.390 1 1/2ʺ 1/2 0.562 2ʺ Metric Flat Washers 18.8 Stainless Steel 6mm 6.4 12.5 8mm 8.4 17 10mm 10.5 21 12mm 13 24 16 mm 17 30 20mm 21 37 Nominal Thickness 0.062 0.078 0.078 0.078 0.100 1.6 1.6 2 2.5 3 3 Washer Dimensions Part No. 5455‐807 5455‐808 5455‐809 5455‐810 5455‐815 5455‐816 5455‐817 5455‐818 5455‐819 5455‐820 5455‐822 5455‐824 5455‐826 5455‐828 5455‐830 Screw or Bolt Outside Size Inside Diameter Diameter Silicone Bronze Flat Washers SW6L (6) 0.147 3/8 SW8S (8) 0.174 3/8 SW8L (8) SW10S (10) 0.200 7/16 SW14L (1/4) 0.260 11/16 SW20S (5/16) 0.337 3/4 SW20L (5/16) 0.337 7/8 SW24S (3/8) 0.391 7/8 SW24L (3/8) 0.391 1 SW30 (7/16) 0.500 1‐1/8 SW34 (1/2) 0.563 1‐1/4 SW40 (5/8) 0.688 1‐1/2 SW48 (3/4) 0.813 1‐7/8 0.938 2‐1/4 SW56 (7/8) SW64 (1) 1.031 2‐1/2 H. Paulin & Co. Limited Nominal Thickness 0.032 0.032 0.036 0.040 0.064 0.064 0.064 0.064 0.064 0.091 0.091 0.102 0.114 0.128 January, 2009 NZ3 Washer Dimensions Part No. 5055‐202 5055‐204 5055‐206 5055‐208 5055‐210 5055‐212 5055‐214 5055‐216 5055‐2181 5055‐218 5055‐220 5055‐222 5055‐224 5055‐226 5055‐228 5055‐230 5055‐232 5055‐234 5055‐238 Part No. 5255‐002 5255‐004 5255‐006 5255‐008 5255‐010 5255‐014 5255‐016 5255‐018 5255‐020 5255‐022 5255‐024 5255‐026 NZ4 Screw or Bolt Outside Nominal Size Inside Diameter Diameter Thickness 18.8 Stainless Steel Flat Washers #2 0.094 0.250 0.016 #4 .125 (.135/.115) .312 (.323/.303) .031 (.030/.0335) #6 .156 (.166/.146) .375 (.385/.365) .031 (.030/.0335) #8 .174(.180/.160) .375 (.387/.367) .031 9.030/.0335) #10 .203 (.211/.191) .438 (.450/.430) .031 (.030/.0335) #12 0.250 0.563 0.050 1/4 .281 (.292/.272) .625 (.638/.618) .050 (.0437/.055) 5/16 .345(.350/.330) .750 (.760/.740) .050 (.0437/.055) 3/8 (7/8) .406 (.417/.394) .875 (.886/.866) .050 (.0437/.055) 3/8 (1ʺ) .406 (.417/.394) 1.00 (1.012/.992) .050 (.0437/.055) 7/16 .500 (.508/.488) 1.125 (1.138/1.118) .062 (.055/.069) 1/2 .531 (.539/.519) 1.250 (1.256/1.2360 .062 (.055/.069) 5/8 .688 (.701/.681) 1.500 (1.512/1.492) .078 (.069/.087) 3/4 .813 (.819/.799) 1.875 (1.886/1.866) .109 (.094/.116) 7/8 .938 (.945/.925) 2.00 (2.012/1.992) .109 (.094/.116) 1ʺ 1.062 (1.071/1.051) 2.00 (2.012/1.992) .125 (.116/.130) 1 1/8ʺ 1.187 (1.197/1.177) 2.50 (2.512/2.492) .125 (.116/.130) 1 1/4ʺ 1.312 (1.319/1.299) 2.750 (2.764/2.744) .125 (.116/.130) 1 1/2ʺ 1.563 (1.549/1.569) 3.250 (3.26/3.24) .140 (.130/.148) Screw or Bolt Outside Nominal Size Inside Diameter Diameter Thickness 316 Stainless Steel Flat Washers #2 0.094 0.250 0.016 #4 .125 (.135/.115) .312 (.323/.303) .031 (.030/.0335) #6 .156 (.166/.146) .375 (.385/.365) .031 (.030/.0335) #8 .174(.180/.160) .375 (.387/.367) .031 9.030/.0335) #10 .203 (.211/.191) .438 (.450/.430) .031 (.030/.0335) 1/4 .281 (.292/.272) .625 (.638/.618) .050 (.0437/.055) 5/16 .345(.350/.330) 750 (.760/.740) .050 (.0437/.055) 3/8 (7/8) .406 (.417/.394) .875 (.886/.866) .050 (.0437/.055) 7/16 .500 (.508/.488) 1.125 (1.138/1.118) .062 (.055/.069) 1/2 .531 (.539/.519) 1.250 (1.256/1.236) .062 (.055/.069) 5/8 .688 (.701/.681) 1.500 (1.512/1.492) .078 (.069/.087) 3/4 .813 (.819/.799) 1.875 (1.886/1.866) .109 (.094/.116) January, 2009 H. Paulin & Co. Limited THREAD DIMENSIONS FOR TAPPING SCREWS Type A Threads `D´ `d´ Basic Screw per Major Diameter Minor Diameter Screw Size Dia. Inch Max. Min. Max. Min. 4 6 7 8 10 12 14 (1/4) 5/16 3/8 .112 .138 .151 .164 .190 .216 .250 .313 .375 24 18 16 15 12 11 10 9 9 .114 .141 .158 .168 .194 .221 .254 .333 .390 .110 .136 .152 .162 .188 .215 .248 .327 .383 .083 .102 .114 .123 .133 .162 .185 .234 .291 .078 .096 .108 .116 .126 .155 .178 .226 .282 Nominal * These lengths or shorter have Type AB Threads. Type AB Threads `D´ `d´ Basic Screw per Major Diameter Minor Diameter Screw Size Dia. Inch Max. Min. Min. Min. 90° C'sk 4 6 7 8 10 12 14 (1/4) 5/16 3/8 .112 .138 .151 .164 .190 .216 .250 .313 .375 24 20 19 18 16 14 14 12 12 .114 .139 .154 .166 .189 .215 .246 .315 .380 .108 .132 .147 .159 .182 .208 .237 .306 .371 .086 .104 .115 .122 .141 .164 .192 .244 .309 .082 .099 .109 .116 .135 .157 .185 .236 .299 7/32 9/32 5/16 5/16 3/8 7/16 1/2 5/8 314 9/32 11/32 3/8 3/8 7/16 17/32 19/32 3/4 29/321 Nominal H. Paulin & Co. Limited `L´ Min. Practical. Screw Lengths January, 2009 NZ5 HEAD DIMENSIONS MACHINE SCREWS and TAPPING SCREWS ANSI B18.6.3. - 1972 Head Style Round* Pan Oval Flat Truss Fillister** Diameter of Screw A - diameter Max Min H - height ASME B18.6.3. - 2003 2 3 4 5 6 8 10 12 1/4 5/16 3/8 .162 .146 .069 .059 .187 .169 .078 .067 .211 .193 .086 .075 .236 .217 .095 .083 .260 .240 .103 .091 .309 .287 .120 .107 .359 .334 .137 .123 .408 .382 .153 .139 .472 .443 .175 .160 .590 .557 .216 .198 .708 .670 .256 .237 J - recess A/F .050 .070 .070 .091 .091 .112 .112 .133 .133 .191 .191 T - recess depth A - diameter Max Min .057 .167 .155 .066 .193 .180 .066 .219 .205 .106 .245 .231 .106 .270 .256 .127 .322 .306 .127 .373 .357 .150 .425 .407 .158 .492 .473 .194 .615 .594 .194 .740 .716 H - height J - recess A/F .053 .045 .050 .060 .051 .070 .068 .058 .070 .075 .065 .091 .082 .072 .091 .096 .085 .112 .110 .099 .112 .125 .112 .133 .144 .130 .133 .178 .162 .191 .212 .195 .191 T - recess depth A - diameter Max Min .057 .172 .147 .066 .199 .171 .066 .225 .195 .106 .252 .220 .106 .279 .244 .127 .332 .292 .127 .385 .340 .158 .438 .389 .158 .507 .452 .194 .635 .568 .194 .762 .685 H - c'sink depth .051 .040 .059 .048 .067 .055 .075 .062 .083 .069 .100 .084 .116 .098 .132 .112 .153 .131 .191 .165 .230 .200 0 - height .080 .063 .092 .073 .104 .084 .116 .095 .128 .105 .152 .126 .176 .148 .200 .169 .232 .197 .290 .249 .347 .300 J - recess A/F T - recess depth A -diameter Max Min .050 .057 .172 .147 .070 .066 .199 .171 .070 .066 .225 .195 .091 .096 .252 .220 .091 .096 .279 .244 .112 .115 .332 .292 .112 .115 .385 .340 .133 .143 .438 .389 .133 .143 .507 .452 .191 .194 .762 .685 .191 .194 .635 .568 H - height .051 .040 .059 .048 .067 .055 .075 .062 .083 .069 .100 .084 .116 .098 .132 .112 .153 .131 .230 .200 .191 .165 J - recess A/F .050 .070 .070 .091 .091 .112 .112 .133 .133 .191 .191 T - recess depth A - diameter Max Min H - height .057 .194 .180 .053 .044 .066 .226 .211 .061 .051 .066 .257 .241 .069 .059 .096 .289 .272 .078 .066 .096 .321 .303 .086 .074 .115 .384 .364 .102 .088 .115 .448 .425 .118 .103 .143 .511 .487 .134 .118 .143 .573 .546 .150 .133 .194 .698 .666 .183 .162 .194 .823 .787 .215 .191 J - recess A/F .050 .070 .070 .091 .091 .112 .112 .133 .133 .191 .191 T - recess depth A - diameter Max Min .057 .140 .124 .066 .161 .145 .066 .183 .166 .096 .205 .187 .096 .226 .208 .115 .270 .250 .115 .313 .292 .143 .357 .334 .143 .414 .389 .194 .518 .490 .194 .622 .590 H - c'bore depth .062 .053 .083 .066 .070 .061 .095 .077 .079 .069 .107 .088 .088 .078 .120 .100 .096 .086 .132 .111 .113 .102 .156 .133 .130 .118 .180 .156 .148 .134 .205 .178 .170 .155 .237 .207 .211 .194 .295 .262 .253 .233 .355 .315 0 - height J - recess A/F .031 .035 .039 .043 .048 .054 .060 .067 .075 .084 .094 T - recess depth .023 .027 .031 .035 .039 .045 .050 .056 .064 .072 .081 * Round Head Dimensions are to ANSI B18.6.3. - 1970 ** Fillister Heads are available in Machine Screws only NZ6 January, 2009 H. Paulin & Co. Limited Nylon Fasteners NYLON 6/6 POLYAMIDE (PA) DuPont Engineering Polymers / Americas - Polyamide 66 General-purpose nylon 6/6 has good toughness, tensile strength, and resistance to creep, particularly in the high temperature range. Nylon has excellent wear properties. low coefficient of friction, and exceptional chemical resistance to aromatic hydrocarbons, greases, and oils. Nylon is a hygroscopic material. Moisture acts as a plasticizer reducing the tensile strength, stiffness, and increasing elongation, impact strength, and energy absorbing characteristics. Outdoor weathering can be improved by the addition of carbon black. Nylon will perform well in long range service in most applications at temperatures as high as 185F (85C). Nylon is a translucent off white color. Applications Fasteners - Bearings - Gears - Cams - Gaskets - Printed Circuit Board Hardware Washers -Spacers - Insulators - Spiral Wrap - Flexible Grommets - Wire Ties - Electronic Components -Bushings - Wiring Clips - Cable Clamps – Hole-Plugs - Hose Clamps Nylon 6/6 Mechanical Properties (73o F / 23o C) Tensile Strength Elongation Shear Strength Flexural Modulus Impact Strength Hardness Specific Gravity Melting Point Dielectric Strength Underwriters Laboratory Rating D638 D638 D732 D790 D256 D785 D792 D789 D149 BUL. 94 12,000 psi. 60% 9,600 psi. 410,000 psi. 1.0 ft/lb/in R121 1.13 500 F 600 v/mil 94V2 H. Paulin & Co. Limited 82.7 MPa 60% 66.2 MPa 2.,287 MPa 5.5 kg/cm2 M79 1.13 260o C 10 OHM-CM 94V2 January, 2009 NZ7 Nylon Fasteners Plastics Mechanical Test Data Nylon 6/6 meets MIL-M20693B "A" Type 1, LP410A, and ASTM D789-66 Type 1, GDE 2. All tests performed per ASTM specifications. Parts molded in Nylon 6/6, dry as o o molded, un-moisturized, at 73 F / 23 C. Machine Screws TENSILE TEST SIZE 2-56 4-40 6-32 8-32 10-24 10-32 1/4-20 ULTIMATE TORQUE BEFORE DEFORMATION ---NO TEST--24 In. Oz. 30 In. Oz. 5 In. Lbs 6 In. Lbs. 7 In. Lbs. 13 In. Lbs. ---NO TEST--12-16 In. Oz. 18-20 In. Oz. 2-3 In. Lbs. 2-4 In. Lbs. 3-4 In. Lbs. 9-10 In. Lbs. MAX TORQUE YIELD BREAK LBS. LBS. 16 38 65 99 139 155 296 19 41 69 108 149 165 312 DOUBLE SHEAR YIELD BREAK LBS. LBS. ------NO TEST-----45 50 91 97 158 164 187 257 234 241 413 432 Metric Machine Screws TENSILE TEST MAX TORQUE YIELD BREAK DOUBLE SHEAR YIELD BREAK ULTIMATE BEFORE SIZE M2 X .4 M2.5 X .45 M3 X .5 M3.5 X .6 M4 X .7 M5 X .8 TORQUE NO TEST NO TEST .32 Nm. .43 N. .45 Nm. .93 Nm. DEFORMATION NO TEST NO TEST .2 - .26 Nm. .28 - .34 Nm. .36 - .43 Nm. .73 - .79 Nm. LBS. 7.12 N. 8.9 N. 22 N. 53 N. 214 N. 271 N. LBS. N/B N/B N/B N/B N/B N/B LBS. 89 N. 156 N. 294 N. 378 N. 600 N. 1081 N. LBS. 116 N. 169 N. 329 N. 405 N. 636 N. 1134 N. M6 X .1 M8 X 1.25 1.83 Nm. 3.39 Nm. 1.41 - 1.47 Nm. 2.45 - 2.82 Nm. 845 N. 1.677 N. 912 N. 1744 N 1806 N. 2980 N. 1877 N. 3034 N. M10 X 1.50 5.31 Nm. 4.52 - 4.86 Nm. 2749 N. N/B 5026 N. 5280 N. NZ8 January, 2009 H. Paulin & Co. Limited Nylon Fasteners Plastics Mechanical Test Data Nylon 6/6 meets MIL-M20693B "A" Type 1, LP410A, and ASTM D789-66 Type 1, GDE 2. All tests performed per ASTM specifications. Parts molded in Nylon 6/6, o o dry as molded, un-moisturized, at 73 F / 23 C. Hex Nuts SIZE 4-40 6-32 8-32 10-24 10-32 1/4-20 5/16-18 3/8-16 1/2-13 5/8-11 #1 TENSILE LBS. 85 135 172 211 276 311 877 994 2,367 3,487 #2 TENSILE TORQUE 2 In. Lbs. 5.2 In. Lbs. 6.8 In. Lbs. 7 In. Lbs. 8 In. Lbs. 19.3 In. Lbs. 44.3 In. Lbs. 74 In. Lbs. 15.7 Ft. Lbs. 31.7 Ft. Lbs. Test #1 Pull Test - Nylon Nut on Metal Screw RECOMMENDED TORQUE BEFORE DEFORMATION 1.5 In. Lbs. 4 In. Lbs. 5 In. Lbs. 5.5 In. Lbs. 6.5 In. Lbs. 17 In. Lbs. 42 In. Lbs. 72 In. Lbs. 13 Ft. Lbs. 30 Ft. Lbs. Test #2 Torque - Nylon Nut on Metal Screw Metric Hex Nuts SIZE M2 M2.5 M3 M3.5 M4 M5 M6 M8 M10 TENSILE NO TEST 135.23 N. 142.34 N. 369.20 N. 451.94 N. 940.35 N. 1556.65 N. 2597.76 N. 6283.11 N. ULTIMATE TORQUE NO TEST NO TEST NO TEST 2.3 CM/KG 4.5 CM/KG 8.3 17.6 CM/KG 56.2 CM/KG 89.93 CM/KG H. Paulin & Co. Limited January, 2009 NZ9
