HIGH PRESSURE DECORATIVE LAMINATE
SOUND ATTENUATION CORE
STC 41, 42, 43, 44, 45 OR 46
MULTI-PLY CONSTRUCTION
20-MINUTE POSITIVE PRESSURE
HERITAGE
ARTISTRY
VT Door Type
1P50H
SR-20PP-HPDL
(Interior use only)
TOP RAIL:#
3-3/8” Structural Composite Lumber (SCL) or Fire Comp with surface applied intumescent.
VERTICAL STILES:#
1-3/8” Structural Composite Lumber (SCL) or Fire Comp with mill option hardwood edge, laminate edge optional. Crossbands and intumescent concealed at edge.
CORE:#
Sound Attenuation Core
CROSSBANDS:
High Density Fiber (HDF), no added urea-formaldehyde HDF, 20% of door construction weight,
or FSC* certified composed of pre-consumer recycled material.
LAMINATE FACES:
Horizontal grade - standard (HGS)
FINISHED THICKNESS:
1-3/4” (± 1/16”)
BOTTOM RAIL:#
3-3/8” Structural Composite Lumber (SCL) or Fire Comp
All dimensions shown are nominal before sanding, trimming and
prefitting within industry standards. Specifications may be changed at
manufacturer’s option. Prefit and stock sizes available.
No blocking required
#Contain no added urea-formaldehyde.
*No added urea-formaldehyde must be specified.
LEED Version 3 Credit Assistance
Recycled Material MR 4: 1-2 points
Regional Material MR 5: 1-2 points
Low-Emitting Material EQ 4.4*
Certified Wood MR 7
Credit assistance available for multiple LEED rating systems
X
X
X
X
AWS/WDMA
AWS PREMIUN
PREMIUM
GRADE
GRADE
EXTRA
EXTRA
HEAVY
HEAVY
DUTY
DUTY
DOOR
DOOR
DOOR FEATURES:
DOOR STANDARDS:
Finish Type: Woodgrains, Solid Colors & Patterns
•WDMA I.S. 1-A-2011 and AWS, Edition 2, Section 9 Quality Standards (Bonded Core).
Laminate Match: Horizontal grade - standard (HGS)
• Top and bottom rails of door shall be factory sealed.
Vertical Edges:
(visible surface) Edges are: unfinished (-1), finished at
factory (-2), and painted at factory (-4) with a mill option
hardwood edges for staining or painting. Optional edges
are: same as face material laminated (-3) with edgebefore-face construction.
• Doors shall be clad in horizontal grade standard high pressure decorative laminate, meeting
or exceeding NEMA Standard LD3, Type HGS, with Type 1. Standard colors and patterns may be
selected, or custom colors and patterns can be specified at additional cost.
Cutouts: 3-5/16” minimum distance between lite and lock cutout and 5”
minimum distance from door edge.
• Sound ratings were achieved through testing at Riverbank Acoustical Laboratories in accordance with ASTM E90-90.
• Positive pressure 20-minute Intertek/Warnock Hersey fire labels shall be available within size
and usage limitations. Positive pressure must be noted at time of bid. UL 10C
Standard Bevel: 1/8” in 2”
• Hardware preparation: All cutouts for mortise hardware shall be made at the factory from
hardware manufacturer’s templates and approved shop drawings.
Clearances: 1/8” top, 1/8” lock and hinge stiles. See NFPA-80 6.3.1.7.1, 2013
Edition. Bottom clearance 3/4” max. (bottom of the door to top finish floor)
See NFPA-80 4.8.4.1, 2013 edition.
• Doors shall be individually poly-bagged for protection in transit and storage periods, and
shall be marked as per tag openings on shop drawings.
Screw Holding and Split Resistance:
Refer to July 31, 2008 Customer Service Update #CS119F
(www.vtindustries.com/doors/csupdates)
*20 min Pairs available STC 43
• Cutouts for vision panels shall be made at the factory and shall be of sizes and locations as
indicated on the drawings. See STC chart for lite sizes by STC rating.
• Door bottoms, sweeps, thresholds, gasketing, lite kits and glass may be supplied by others
or VT.
1000 Industrial Park • Holstein, IA 51025 • 800.827.1615 • Fax 712.368.4111 • www.vtindustries.com/doors
1P50H-1214
WOOD VENEER
SOUND ATTENUATION CORE
STC 41, 42, 43, OR 45
MULTI-PLY CONSTRUCTION
45-MINUTE POSITIVE PRESSURE
HERITAGE
ARTISTRY
VT Door Type
1P50H
SR-45PP-HPDL
(Interior use only)
TOP RAIL:#
3-3/8” Fire Comp with surface applied intumescent.
VERTICAL STILES:#
1-3/8” Fire Comp with matching hardware.
Crossbands and intumescent concealed at edge.
CORE:#
Sound Attenuation Core
CROSSBANDS:
High Density Fiber (HDF), no added urea-formaldehyde HDF, 20% of door construction weight,
or FSC* certified composed of pre-consumer recycled material.
LAMINATE FACES:
Horizontal grade - Std (HGS)
FINISHED THICKNESS:
1-3/4” (± 1/16”)
BOTTOM RAIL:#
3-3/8” Fire Comp
All dimensions shown are nominal before sanding, trimming and
prefitting within industry standards. Specifications may be changed at
manufacturer’s option. Prefit and stock sizes available.
#Contain no added urea-formaldehyde.
*No added urea-formaldehyde must be specified.
LEED Version 3 Credit Assistance
No blocking required
Recycled Material MR 4: 1-2 points
Important: This door requires a standard
1-15/16” rabbetted hollow metal door frame.
Regional Material MR 5: 1-2 points
Low-Emitting Material EQ 4.4*
FSC MR 7
Credit assistance available for multiple LEED rating systems
X
X
X
X
AWS/WDMA
AWS PREMIUN
CUSTOM
GRADE
GRADE
EXTRA
EXTRA
HEAVY
HEAVY
DUTY
DUTY
DOOR
DOOR
DOOR FEATURES:
DOOR STANDARDS:
Finish Type: Woodgrains, Solid Colors, or Patterns
• WDMA I.S. 1-A-2011 and AWS, Edition 2, Section 9 Quality Standards.
Match: Laminate
• Top and bottom rails of door shall be factory sealed.
Veneer Face Assembly: Running match standard. Center or balanced
available if specified.
• Doors shall be clad in AWS/WDMA custom “A” grade wood veneer with minimum thickness
1/42” before sanding, with type 1 adhesive containing no added urea-formaldehyde. Both domestic and exotic hardwood species available for transparent finish. Mill option face material
for opaque finish. Custom “AA” grade wood veneer available by request.
Pairs and Sets: Pair match. 20 min Pairs acailable STC 43
Doors/Transoms: Continuous match standard. End or no match available if specified.
Vertical Edges:
(visible surface) Same as face material laminated (-3)
with edge-before-face construction. Optional edges
are: unfinished (-1), finished at factory (-2), and painted
at factory (-4) with a mill option hardwood edges for
staining or painting.
Cutouts: 3-5/16” minimum distance between lite and lock cutout
and 5” minimum distance from door edge.
Standard Bevel: 1/8” in 2”
Clearances: 1/8” top, 1/8” lock and hinge stiles. See NFPA-80 6.3.1.7.1, 2013
Edition. Bottom clearance 3/4” max. (bottom of the door to top finish floor)
See NFPA-80 4.8.4.1, 2013 edition.
Screw Holding and Split Resistance:
Refer to July 31, 2008 Customer Service Update #CS119F
(www.vtindustries.com/doors/csupdates)
• Sound ratings were achieved through testing at Riverbank Acoustical Laboratories in accordance with ASTM E90-90.
• Positive pressure 20-minute Intertek/Warnock Hersey fire labels shall be available within size
and usage limitations. Positive pressure must be noted at time of bid. UL 10C
• Hardware preparation: All cutouts for mortise hardware shall be made at the factory from
hardware manufacturer’s templates and approved shop drawings.
• Doors shall be individually poly-bagged for protection in transit and storage periods, and
shall be marked as per tag openings on shop drawings.
• Cutouts for vision panels shall be made at the factory and shall be of sizes and locations as
indicated on the drawings. See STC chart for lite sizes by STC rating.
• Door bottoms, sweeps, thresholds, gasketing, lite kits and glass may be supplied by others
or VT.
*45 min STC door max size 3x7
1000 Industrial Park • Holstein, IA 51025 • 800.827.1615 • Fax 712.368.4111 • www.vtindustries.com/doors
5P50H-1214