APO DT Covers - NEMA 4X Rated Non-Metallic Enclosures
LG: Transparent hinged inspection window cover and 4 non-metallic corner screws to secure
the cover to the base. Intended for use on Vynckier APO Series enclosures.
KIT: Transparent hinged inspection window cover and 4 non-metallic blanking inserts to secure
the cover to the base. Suitable for mounting on 3rd party enclosures and panels. Blanking
inserts reduce mounting holes to hold a #10 self tapping screw.
* DTCOVER-KIT can be mounted on any smooth flat surface. Installation instructions included.
Features
•5 available sizes from 12” x 7” to 24” x 12” (H x W).
•DT Covers are maintenance free and corrosion resistant.
•Frames are made from hot compression molded halogen free, self extinguishing fiberglass
reinforced polyester (FRP) that can withstand continuous temperatures from -58°F to 302°F
(-50°C to 150°C).
•Inspection windows are made from transparent polycarbonate that can withstand
continuous temperatures to
248°F (120°C).
•Included thumb screw inserts
allow quick window opening
for access to interior
components.
•Gaskets are made from
continuously poured
polyurethane foam.
Applications
APO DT Covers are designed
for use as inspection
windows in highly corrosive
environments where easy
viewing and access is
essential.
Standards
IEC 60529 (IP67)
IEC 62262 (IK10)
IEC 60439-1
IEC 62208
EN 60529 (IP67)
EN 62262 (IK10)
EN 60439-1
EN 62208
Approvals
UL Recognized for Types:
3, 3R, 4, 4X & 12
UL File E54315
DT Cover is ULRecognized for UL Type
4X which allows the
customer to submit entire application
for UL Listing of product
271 McCarty, Houston, TX 77029
(713) 374-7850
www.vynckier.com
Part Number
Exterior Dimensions
Interior Dimensions
Viewing Area
Weight
Front Plate
**suffix
(ex. A1-1207E1DTHPL2)
H x W x D Inches
(mm)
H x W x D Inches
(mm)
H x W Inches
(mm)
Lbs
(kg)
A: Aluminum
A31-DTCOVERLG
A31-DTCOVERKIT
11.89 x 7.32 x 1.77
(302 x 186 x 45)
11.10 x 6.54 x 1.65
(282 x 166 x 42)
10.27 x 4.30
(261 x 109)
2.05
(.93)
AFP1207A
A41-DTCOVERLG
A41-DTCOVERKIT
11.89 x 11.89 x 1.77
(302 x 302 x 45)
11.10 x 11.10 x 1.65
(282 x 282 x 42)
10.27 x 8.90
(261 x 226)
2.27
(1.03)
AFP1212A
A71-DTCOVERLG
A71-DTCOVERKIT
14.65 x 11.89 x 1.77
(372 x 302 x 45)
13.86 x 11.10 x 1.65
(352 x 282 x 42)
11.66 x 10.27
(296 x 261)
3.13
(1.42)
AFP1412A
A51-DTCOVERLG
A51-DTCOVERKIT
19.20 x 11.89 x 1.77
(488 x 302 x 45)
18.40 x 11.10 x 1.65
(467 x 282 x 42)
16.12 x 10.27
(409 x 261)
3.55
(1.61)
AFP1912A
A61-DTCOVERLG
A61-DTCOVERKIT
23.74 x 11.89 x 1.77
(603 x 302 x 45)
22.91 x 11.10 x 1.65
(582 x 282 x 42)
20.70 x 10.27
(526 x 261)
4.55
(2.06)
AFP2412A
Manufacturer’s Recommended Installation Instructions:
As each application is different, these are general guidelines only:
1. Using DT Cover corner hole center dimensions pre-drill (hole diameter .203) panel for a #10
self-tapping screw (not included).
2. Mounting surface area should be flush and clean of dirt and debris.
3. Wipe clean DT cover gasket with clean cloth and alcohol.
4. Cover can be mounted on panel using VES “Blanking Insert” part # 41523.079 (included in KIT).
5. Place cover on panel and using the Blanking Insert, place one in each corner from the
outside and secure from the inside with #10 self-tapping screw.
6. Seal head of screw on inside of panel with RTV to ensure watertight integrity.
Alternate construction:
Using long machine screws or bolts and a large enough washer to cover the DT cover corner
screw holes, these can be used to mount the cover to the panel.
example drawing: A41-DTCOVER
271 McCarty, Houston, TX 77029
|
(713) 374-7850
|
www.vynckier.com