indoor lighting solutions
Main catalogue 2013–2014
Appareo
Designed by Howl Design Studio
It is like magic. The luminaire is lit – but where is
the light source? Appareo is a suspended luminaire
which maximises the design flexibility offered by
LED’s – without compromising on the requirements
for efficiency and ergonomics.
The starting point was a new type of glass
diffuser which acts as both the reflector
and the louvre. The light is distributed indirectly towards the ceiling and directly down
towards the work surface. Providing the
ambient and task lighting levels demanded
in contemporary office spaces.
Unlit the transparent glass screen is
housed with a slender aluminium frame for
the height of discretion. When lit, the LEDs
positioned across the slide of the luminaire bring the screen to life, increasing the
opacity and guiding the light for an optimal
visual experience. The result is a fresh, crisp
light that does not dazzle.
8
www.fagerhult.com • www.fagerhult.co.uk
Appareo
523
Luminaire
System, W
Colour temp., K
Lightdistr.
Luminous flux, lm
Efficiency, lm/W
76
4000
40/60
5220
70
Luminaire must be completed with desired function. See table with suffix codes.
For current information on output and luminous flux, please refer to our website.
Information LED-Luminaire
Colour temp, (CCT) Ra (CRI) Life
4000 K
≥ 80
L70 50.000 h
kg
5.8
White
11070- ■
Black
11071- ■
Suffix code
Colour quality
MacAdam 4 SDCM
For further information on LEDs, please refer to the Technical
Information chapter.
■ -402 DALI
■ -442 e-Sense ActiLume single luminaire
Add suffix code to the end of the luminaire part number to indicate required function. Only one suffix can be added.
Installation
Two-point wire pendant. Wire suspension and friction lock included
with luminaire. Balanced. External
ballast box is mounted directly
to ceiling or placed loosely above
ceiling.
Connection
Luminaire is connected in the
ballast box with 230 V, built-in LED
ballast in ballast box. Cable entry
on top or through the knockout in
the side. Snap-in terminal block
5⊗2.5 mm², 1-phase throughwiring possible. The luminaire is
equipped with a 1.5 m mains cable
3⊗0.75 mm² between the luminaire
and the external ballast box.
Design
Body in extruded aluminium and
ends in cast metal. The luminaire
is lacquered in black (RAL 9005)
structured or white (RAL 9016)
structured.
Louvre
Edge-lit clear prismatic acrylic diffuser (PMMA). Average luminance
<2000 cd/m².
Dimming
DALI or e-Sense ActiLume as standard.
Miscellaneous
Appareo has side-emitting LEDs, as
a result the luminaire’s acrylic diffuser is completely transparent when
switched off and provides an evenly
luminated surface when lit.
e-Sense ActiLume is integrated into the
ends of the luminaire.
1255
Ballast box
444
374,5
38
99
28
The mounting point for the wire suspension is adjustable lengthways.
10
www.fagerhult.com • www.fagerhult.co.uk
Appareo
523
Luminaire
System, W
Colour temp., K Lightdistr.
Luminous flux, lm Efficiency, lm/W
54
4000
40/60
4966
92
For current information on output and luminous flux, please refer to our website.
Information LED-Luminaire
Colour temp, (CCT) Ra (CRI) Life
4000 K
≥ 80
L70 50.000 h
kg
4.6
White
53751-402
Black
53752-402
Colour quality
MacAdam 4 SDCM
For further information on LEDs, please refer to the Technical
Information chapter.
Installation
Wire suspension (4 m) with ceiling
bracket and friction lock, is included
with the luminaire. External ballast
box is mounted directly to ceiling or
placed loosely above ceiling.
Connection
Luminaire is connected in the
ballast box with 230 V, built-in LED
ballast in ballast box. Cable entry
on top or through the knockout in
the side. Snap-in terminal block
5⊗2.5 mm², 1-phase throughwiring possible. Supplied with a 3 m
white fabric cord between luminaire
and external ballast box.
Design
Luminaire body in cast aluminium.
The luminaire is lacquered in black
(RAL 9005) structured or white
(RAL 9016) structured. Ballast box
in plastic.
Louvre
Edge-lit clear prismatic acrylic diffuser (PMMA). Average luminance
<3000 cd/m².
Dimming
DALI dimming as standard.
Miscellaneous
Appareo has side-emitting LEDs, as
a result the luminaire’s acrylic diffuser is completely transparent when
switched off and provides an evenly
luminated surface when lit.
When switched off the luminaire is
completely transparent.
4000
Ballast box
675
330
31
444
38
99
Ballast boxes can be placed above
ceilings or surface mounted directly to
the ceiling.
www.fagerhult.com • www.fagerhult.co.uk
11
pendant/surface
Circular
Notor G2
Designed by Julle Oksanen and Vesa Honkonen
Fagerhults classic Notor G2 luminaire has now been
brought right up-to-date using the latest in LED
technology. The expansive range spans suspended,
surface mounted and recessed variations, offering the
flexibility to maintain a consistent aesthetic across
numerous applications.
Notor is characterised by discretion. Its
minimalist style and clean line design is
constructed of aluminium with a natural
anodised finish. In continuous runs Notor
provides an unbroken line of light in the
ceiling while the L-coupler offers the scope
to create more varied installations. The LED
variation is lit all the way to the end-caps of
the luminaire housing, further enhancing
its visual appeal with illuminated corners.
The luminaires can be connected using
a snap-in connector for safe and efficient
installation, while providing additional
protection to the light sources and other
technology during installation.
Notor Recessed, see page 144–155.
16
www.fagerhult.com • www.fagerhult.co.uk
Notor LED
1. Notor LED utilises the benefits of LEDs. The
luminaire has an exceptional level of uniformity in
the diffuser and a high luminous efficacy. Notor LED
can be surface mounted or suspended via a wire
pendant.
2. The system is connected via end-cap of the start
luminaire. The wiring is hidden by the end-cap. The
start luminaire can also be used in a single installation.
3. For continuous and system installations, throughwiring is achieved via a snap-in connection: the
luminaires are clicked together and then secured
with a screw joint. Each luminaire unit has an integrated ballast.
4. The continuous luminaires have an unbroken line
of light without dark fields at the transition between
the luminaire units.
1
5. The L-joints provide full lighting, creating an aesthetically pleasing transition in corners.
6. The LEDs are protected against contact by a plastic cover which prevents external influences.
2
3
5
6
18
4
www.fagerhult.com • www.fagerhult.co.uk
Notor LED
Luminaire
System, W
Colour temp., K
Luminous flux, lm
Efficiency, lm/W kg
Straight luminaire
11
4000
900
82
2.0
22
4000
1800
82
3.0
44
4000
3600
82
6.0
Illuminated corner
Right
22
4000
1800
82
3.0
Left
22
4000
1800
82
3.0
* Only for suspension and in closed systems.
For current information on output and luminous flux, please refer to our website.
Information LED-Luminaire
Colour temp, (CCT) Ra (CRI) Life
4000 K
≥ 80
L70 50.000 h
Start
Continuous
26370 ■
26371 ■
26372 ■
26373 ■
26374 ■
26375 ■
26392* ■
26390 ■
26393* ■
26391 ■
Suffix code
Colour quality
MacAdam 4 SDCM
For further information on LEDs, please refer to the Technical
Information chapter.
Installation
Designed for single or continuous
installation with surface mounting
and via a wire pendant and special
loops that give flexible c/c spacing.
Can also be mounted on the wall via
the wall bracket, see accessories.
Connection
The luminaire is equipped with an
access hole for cabling on the top. A
special short end with cable entry is
used for a surface mounted mains
cable, see accessories. The luminaire
unit is equipped with a throughwiring cable (5⊗1.5 mm²) and a
snap-in connection in each end-cap.
In a continuous installation, the
luminaire row should always begin
with a start luminaire.
Design
Luminaire unit in natural anodised,
extruded aluminium finish.
Louvre
Opal – plate in frosted acrylic
(PMMA).
Accessories
Assembly fittings and supplementary components, see accessories.
Miscellaneous
The LEDs are protected against
contact. Illuminated corners with
wiring option can only be suspended. The illuminated corners can be
used as a start luminaire and are
equipped with through-wiring and
quick connection in one end. The
corners can only be used in closed
systems.
■ -402 DALI
Add suffix code to the end of the luminaire part number to indicate required function.
By continuous installation all wiring
needed is performed in the start luminaire, which provides a safe and efficient
installation.
All variants
A
A₂
A₁
A
684
1266
2433
A₁
195
195
195
A₂
385
969
2136
A
A₂
A₁
A
584
1168
2335
A₁
99
99
99
100
A₂
385
969
2136
99
406 595
385
632
www.fagerhult.com • www.fagerhult.co.uk
89
LED provides uniform luminance and
completely illuminated corners.
19
pendant/surface
523
Notor G2
1. The range is provided with connections integrated
into the luminaires. The opening on the luminaire
runs to the opposite end-cap instead of terminating
with a connection module.
2–3. The connection takes place at the end of the
start luminaire and is concealed by a cover plate on
the bottom.
4–5. Continuous mounting can provide aesthetic
and practical advantages. The continuous mounting is made completely without any visible details,
the screw fixing gives the mechanic stability.
Continuous- or system mounting always start with
a connection luminaire that connects to continuous luminaires. Continuous connecting creates an
unbroken line of light.
6–7. Notor G2 also offers possibilities to mount a
system using L-, T- or X-connections. If you want to
mix direct and indirect luminaires in the system, you
can use an exchange unit.
1
2
3
4
5
6
7
Notor G2 system connections
1)
4)
2)
3)
1) Exchanger, Direct/Indirect
2) emLED-unit
3) L-connection
4) T-connection
5) X-connection
6) Wall bracket with connection, left
7) Wall bracket
8) Wall socket
5)
Notor G2 system dimensions
Notor G2 wall holdings
A1
A2
A3
6)
7)
8)
20
A4
W
1⊗21/39
1⊗20/24
1⊗25/28/50/54
1⊗32/35/45/49/73/80
2⊗1⊗21/39
2⊗1⊗25/28/50/54
2⊗1⊗32/35/45/49/73/80
A5
www.fagerhult.com • www.fagerhult.co.uk
A1
1098
798
1398
1698
1971
2571
3171
A2
1038
738
1338
1638
1911
2511
3111
A3
933
633
1233
1533
1806
2406
3006
A4
1083
783
1383
1683
1956
2556
3156
A5
978
678
1278
1578
1851
2451
3051
Avion
Avion has a delicate beauty masking a robust design.
An elegant flow of light which creates an impression of weightlessness, designed to act as a striking
solitary luminaire, or to form a system where its long
dimensions create a fascinating linear interaction.
Avion is Fagerhult’s new extensive range of
pendant luminaires. Behind the clean lines
hides an innovative design and advanced
lighting technology. The range comprises
of five different combinations of direct and
indirect light distributions. Efficiency and
visual comfort are ensured via Fagerhult’s
Lamell and Beta r5 louvres.
The light source for the indirect distribution is discreetly positioned in a subtle
elevation at the top of the luminaire, while
the thin lines and the concaved edges provide the essence of the design. The distinctive colour contrasts along the side attracts
attention and enhances its form.
Avion can be continuously installed,
seamlessly integrated via continuous connectors. The addition of flexible connectors
offers the potential to create curved lines,
with variations at each connection point.
Avion achieved an honourable mention
in the 2009 red dot design awards.
26
www.fagerhult.com • www.fagerhult.co.uk
Avion 50
523
Beta, Delta, Lamell
Luminaire, single installation incl. end-caps
FDH
kg
White/black
Grey/white
Beta
■
1⊗25/28
6.5
29141
29171
■
1⊗32/35
8.0
29142
29172
■
1⊗45/49
8.0
29143
29173
■
1⊗50/54
6.5
29144
29174
2⊗25/28
6.5
29146
29176
■ ● ●
2⊗32/35
8.0
29147
29177
■ ● ●
■
2⊗45/49
8.0
29148
29178
■
2⊗50/54
6.5
29149
29179
Delta
2⊗25/28
6.5
29396
29406
■ ●
2⊗32/35
8.0
29397
29407
■ ●
■
2⊗45/49
8.0
29398
29408
■
2⊗50/54
6.5
29399
29409
Lamell
■
1⊗25/28
6.5
29121
29151
■
1⊗32/35
8.0
29122
29152
■
1⊗45/49
8.0
29123
29153
■
1⊗50/54
6.5
29124
29154
2⊗25/28
6.5
29126
29156
■ ●
2⊗32/35
8.0
29127
29157
■ ●
■
2⊗45/49
8.0
29128
29158
■
2⊗50/54
6.5
29129
29159
1⊗32/35 W, Beta
2⊗32/35 W, Beta
W
25/28
32/35
45/49
50/54
D¹
1200
1500
1500
1200
D²
1275
1575
1575
1275
1⊗32/35 W, Lamell
D³
1350
1650
1650
1350
D⁴
1330
1630
1630
1330
D⁵
1460
1760
1760
1460
Luminaire, continuous installation excl. end-caps
FDH
kg
White/black Grey/white
Beta
1⊗25/28
6.4
29241
29251
1⊗32/35
8.0
29242
29252
1⊗45/49
8.0
29243
29253
1⊗50/54
6.4
29244
29254
2⊗25/28
6.4
29246
29256
2⊗32/35
8.0
29247
29257
2⊗45/49
8.0
29248
29258
2⊗50/54
6.4
29249
29259
■
■
■
■
■
■
■
■
Suffix code
■ -368 DALI/Phase-pulse control
■ -409 Phase-pulse control, one pull-cord
■ -436 DALI/DSI/switchDIM
● -218 e-Sense smartSWITCH absence detector
● -219 e-Sense smartSWITCH on/off
● -220 e-Sense smartSWITCH
● -367 e-Sense ActiLume master luminaire
● -384 e-Sense ActiLume with single luminaire pull dim-switch
● -427 e-Sense Connect
● -428 e-Sense Connect with sensor
Add suffix code to the end of the luminaire part number to indicate required function. Only one suffix can be added.
A continuous coupler is available as an
accessory.
2⊗32/35 W, Lamell
D⁶
1335
1635
1635
1335
Installation
Wire suspension via wire lock
secured directly to the luminaire.
Balanced.
Connection
Single installation – the luminaire is
equipped with a 2.4 m mains cable
3⊗0.75 mm² and an earthed plug
as standard. Luminaires ordered
with switchDim or DALI are
equipped with 2.4 m mains cable
5⊗0.75 mm² excl. plug.
Continuous installation – 5-way
snap-in terminal block at each
end and through-wiring cable
3⊗1.5 mm² as standard. With dimming, 5-way snap-in terminal block,
1-phase through-wiring possible.
Design
Body in extruded aluminium and
end-caps in cast aluminium. The luminaire is finished in a white/black
(RAL 9016 structured/RAL 9005)
or alu-grey/white (RAL 9006 structured/ RAL 9016) design. The top
cover is transparent acrylic plastic.
Luminaires for continuous installation require end-caps – must be
ordered separately.
Louvre
Beta – double parabolic reflector
louvre with satin matt metallised
aluminium side and cross-blades
with excellent reflection characteristics (> 92 %), integrated into
a single unit. The louvre remains
attached when opened. Earthed.
Delta – micro-prism louvre in acrylic
TPb (PMMA).
Lamell – alu-grey enamelled sheet
steel, cross-blade louvre.
Reflector
Reflector material of metallised aluminium with satin matt surface.
Accessories
Assembly fittings and supplementary components, see accessories.
D⁶
D¹
D²
D³
52
206
30
D⁴
D⁵
The removable end-caps partially conceal the friction lock from view.
www.fagerhult.com • www.fagerhult.co.uk
Multilume Flat
Multilume Flat is amongst the first LED luminaires to be
more efficient than its T5 equivalent; producing more than
80 lumens per watt while still retaining optimal lighting ergonomics. The LED evolution of the Multilume range offers
a recessed mounted solution for general office lighting.
Encompassing a range of innovative
features, Multilume Flat was developed to
make the planning and installation processes easier, in a construction industry where
margins are becoming ever tighter.
Advancing from a downlight application,
Multilume Flat transforms LED’s into a viable solution for full general lighting with
the capacity to replace its T5 incumbents.
A generous number of closely positioned
diodes work in unison to provide a light
which can be shaped by the choice of
louvre. The micro-prismatic Delta closely
controls the intensity of the light, achieving the requirements for 3000 cd/m². The
Opal alternative provides a crisp light and
a somewhat whiter surface. To further enhance its efficiency the luminaire can be optimised for lighting control, reacting to both
incidental daylight and human presence.
As part of a holistic approach,
Multilume Flat has been designed to
address the tight time requirements and
restricted ceiling heights in many construction projects. The luminaire is only 50 mm
high and has a flexible ballast box attached
by Velcro which can be detached and
positioned next to the luminaire. The frame
consists of an aesthetic but sturdy aluminium profile which contributes towards
the clean line aesthetic prevalent in contemporary architecture. Multilume Flat is
available in three different module designs;
two square and one rectangular. As with all
Fagerhult’s LED luminaires, Multilume Flat
is updated each year with the latest
generation LEDs, ensuring our customers
always have access to the most up-to-date
technology.
140
www.fagerhult.com • www.fagerhult.co.uk
Multilume Flat
1
3–4. The connection cable between the luminaire
and ballast box is sufficiently long to permit the ballast box to be positioned either side of the luminaire
or next to it, if the space above the suspended ceiling is restricted.
2
pendant/surface
1–2. In addition to the 600⊗600 module,
Multilume Flat is also available in 300⊗300 and
300⊗1200 designs. The latter are for ceilings with
visible T-bars.
6. Models for suspended ceilings with concealed
T-bars have brackets on one side that are folded over
the suspended ceiling profile once the luminaire
has been positioned into the ceiling. Suitable for
suspended ceilings with concealed T-bars where the
ceiling boards are fitted symmetrically.
3
4
6
7
5
www.fagerhult.com • www.fagerhult.co.uk
7. The design of the frame on Multilume Flat is
aligned with the bottom edge of the T-bar profile,
which gives the suspended ceiling a clean and neat
appearance.
141
recessed
5. The ballast box has two cable entries for connection, providing the option for onward connection.
Multilume Flat
523
Luminaire
LED-module, lm, W
Length
Width
Colour temp., K
Luminous flux, lm
Visible T-bars (VTB)
1000, 15
300
300
3000
1000, 15
300
300
4000
4000, 45
600
600
3000
4000, 45
600
600
4000
4481
4000, 45
1200
300
3000
4000, 45
1200
300
4000
Concealed T-bars (HB)/D-edge, symmetrical attachment of ceiling boards
4000, 45
600
600
3000
4000, 45
600
600
4000
4481
For current information on output and luminous flux, please refer to our website.
Information LED-Luminaire
Colour temp. (CCT) Ra (CRI) Life
3000 K
≥ 80
L70 50.000 h
4000 K
≥ 80
L70 50.000 h
600⊗600
100
100
kg
2.4
2.4
6.5
6.5
6.2
6.2
22402
22390
22404
22392
22403
22391
6.5
6.5
22408 ■
22396 ■
■
■
■
■
■
■
Suffix code
Colour quality
MacAdam4 SDCM
MacAdam4 SDCM
■ -03 Connection cable with earthed plug,
RKK 3⊗0.75 mm², L=2.5 m.
■ -402 DALI
Add suffix code to the end of the luminaire part number to indicate
required function. Only one suffix can be added.
For further information on LEDs, please refer to the Technical
Information chapter.
300⊗300
Efficiency, lm/W
300⊗1200
2
B
2
C
2
A
HB
34
C
A
A1
300⊗300
296
600⊗600
596
300⊗1200 1196
HB
600⊗600
596
Ballast box
14
1
1
82
58 50
1
B
A2
266
566
1166
B1
296
596
296
B2
C1
266
566
270
566
596
566
C2
160 82
www.fagerhult.com • www.fagerhult.co.uk
There is full alignment between the
luminaire and the suspended ceiling.
143
recessed
Installation
Luminaire for recessed mounting in ventilated or unventilated
suspended ceilings. The luminaire
must not be covered with insulation. For further details please refer
to the assembly instructions on
our website. Installed in suspended
ceilings with visible T-bars (25 mm).
Also variant for concealed T-bars
(symmetrical suspended ceiling
with concealed bars).
Connection
Connection in ballast box. The
ballast box can be detached and
positioned next to the luminaire.
Snap-in terminal block 3⊗1,5 mm²
(5⊗1,5 mm² where dimming is
required). Can also be supplied with
2,5 m mains cable and earthed plug.
Design
Luminaire body in white enamelled sheet steel (RAL 9016). Frame
in white enamelled aluminium
(RAL 9016).
Louvre
Opal – Opal plate in frosted acrylic
(PMMA).
Miscellaneous
Enclosure class IP 44 under suspended ceilings and IP 20 above
suspended ceilings.
pendant/surface
Opal
Multilume Flat
523
Delta
Luminaire
LED-module, lm, W
Length
Width
Colour temp., K Luminous flux, lm
Visible T-bars (VTB)
1000, 15
300
300
3000
1000, 15
300
300
4000
4000, 45
600
600
3000
4000, 45
600
600
4000
4278
4000, 45
1200
300
3000
4000, 45
1200
300
4000
Concealed T-bars (HB)/D-edge, symmetrical attachment of ceiling boards
4000, 45
600
600
3000
4000, 45
600
600
4000
4278
For current information on output and luminous flux, please refer to our website.
Information LED-Luminaire
Colour temp. (CCT) Ra (CRI) Life
3000 K
≥ 80
L70 50.000 h
4000 K
≥ 80
L70 50.000 h
kg
96
96
2.4
2.4
6.5
6.5
6.2
6.2
22405
22393
22407
22395
22406
22394
6.5
6.5
22409 ■
22397 ■
600⊗600
■
■
■
■
RKK 3⊗0.75 mm², L=2.5 m.
■ -402 DALI
Add suffix code to the end of the luminaire part number to indicate
required function. Only one suffix can be added.
2
B
2
C
2
A
HB
34
14
1
C
1
A
142
■
■ -03 Connection cable with earthed plug,
300⊗1200
A1
300⊗300
296
600⊗600
596
300⊗1200 1196
HB
600⊗600
596
Ballast box
■
Suffix code
Colour quality
MacAdam4 SDCM
MacAdam4 SDCM
For further information on LEDs, please refer to the Technical
Information chapter.
300⊗300
Efficiency, lm/W
82
58 50
1
B
A2
266
566
1166
B1
296
596
296
B2
C1
266
566
270
566
596
566
C2
160 82
www.fagerhult.com • www.fagerhult.co.uk
Installation
Luminaire for recessed mounting in ventilated or unventilated
suspended ceilings. The luminaire
must not be covered with insulation. For further details please refer
to the assembly instructions on
our website. Installed in suspended
ceilings with visible T-bars (25 mm).
Also variant for concealed T-bars
(symmetrical suspended ceiling
with concealed bars).
Connection
Connection in ballast box. The
ballast box can be detached and
positioned next to the luminaire.
Snap-in terminal block 3⊗1,5 mm²
(5⊗1,5 mm² where dimming is
required). Can also be supplied with
2,5 m mains cable and earthed plug.
Design
Luminaire body in white enamelled sheet steel (RAL 9016). Frame
in white enamelled aluminium
(RAL 9016).
Louvre
Delta – microprism louvre in
acrylic (PMMA) with a thin opal
diffuser (acrylic/PMMA) on the
inside(PMMA).
Miscellaneous
Enclosure class IP 44 under suspended ceilings and IP 20 above
suspended ceilings.
Notor Recessed
Fagerhult’s classic Notor luminaire is now also available in an LED version. The family is completed with a
recessed, a suspended and a ceiling-mounted variant,
which together solve any challenge presented by the
lighting project. Notor LEDs are even more efficient
luminaires that take up minimal space.
Notor is characterised by discretion. With
its small size and clean lines, Notor has
become popular amongst light designers
and architects who want to emphasise the
shape of the room. Notor is also an obvious choice in circumstances when there
is a desire to create long lines of light. All
luminaires in the Notor family are available with a T5 or LED light source. Notor is
based on a smart aluminium profile with
a natural anodised finish and is designed
to provide many opportunities for working
creatively with lighting planning. Continuous installation and L-couplings are some
of the features.
The luminaires with LED are lit all the
way out to the end cap of the luminaire
housing, which provides additional freedom to play with angles and properly lit
corners.
The luminaires can be connected using
a snap-in connector for safe and efficient
installation, something which also helps to
protect the light sources and other technology in conjunction with installation.
Notor G2, see page 16–25.
144
www.fagerhult.com • www.fagerhult.co.uk
Notor Recessed
LED
1
2
3
3. Different end-caps are used depending on the
louvre. The end-cap for flush opal version follows
the profile of the fitting, while the dropped opal
end-caps extends beyond the fitting top cover the
acrylic diffuser.
4–5. A cover plate is used in the continuous installation of luminaires at the start and end on the installation. This is to prevent gaps as the aluminium
bodies and acrylic louvres expand very differently
linearly. Cover plate comes with start luminaire.
6
5
4
6–7. Suspension fittings are assembled before the
luminaire is raised to the ceiling. When the screws
are tightened from below, the suspension fitting
swings out and locks the luminaire.
8. There is a 600 mm long dummy section that can
be cut to length in order for the continuous installation to reach the desired length in instances when
the luminaires are not required throughout the run.
9. Please Note! A start luminaire is used after each
L-coupling for onward connection. Max continuous installation length 30 m, limited by the linear
expansion of the different materials. If a longer
continuous installation is required you can start a
new installation.
8
Continuous/End
7
Start
Start
L-Coupler
Continuous/End
L-Coupler
Start
Start
Continuous/End
L-Coupler
9
www.fagerhult.com • www.fagerhult.co.uk
145
recessed
2. The end caps are secured to the luminaire profile
with two screws.
pendant/surface
1. A coupler bracket is used to connect the luminaires together in a continuous installation by hooking into one luminaire and screwing into the next.
Notor recessed LED
523
Opal flush
Straight luminaire
LED-module, lm, W Colour temp., K Length
Luminous flux, lm Efficiency, lm/W
1250, 9.8
3000
600
2500, 19.6
3000
1200
5000, 39.2
3000
2400
1250, 9.8
4000
600
874
73
2500, 19.6
4000
1200
1798
82
5000, 39.2
4000
2400
3596
82
* Not possible to be mounted as single luminaire in ceilings with visible T-bars (VTB).
For current information on output and luminous flux, please refer to our website.
kg
1.9
3.7
7.4
1.9
3.7
7.4
Single
22609*
22610 22611 22612*
22613 22614 ■
■
■
■
■
■
Start
22615 22616 22617 22618 22619 22620 ■
■
■
■
■
■
Illuminated corners
LED-module, lm, W Colour temp., K Module Luminous flux, lm Efficiency, lm/W kg
2500, 19.6
3000
600⊗600
3.5
2500, 19.6
4000
600⊗600 1798
82
3.5
For current information on output and luminous flux, please refer to our website.
Information LED-Luminaire
Colour temp, (CCT) Ra (CRI) Lif e
3000 K
≥ 85
L70 50.000 h
4000 K
≥ 85
L70 50.000 h
Continuous
22621 ■
22622 ■
22623 ■
22624 ■
22625 ■
22626 ■
Installation
Luminaire for mounted in ventilated
or unventilated suspended ceilings.
Installed in suspended ceilings with
visible T-bars, VTB (25 or 15 mm) or
one-piece suspended ceilings.
Connection
Connection by means of a connection box on top of the luminaire.
Wieland Chassis connector 3-way
(GST 18i3), with dimming 5-way
(GST 18i5). In a continuous installation the luminaire row should
always start with a start luminaire.
With continuous installation the
luminaire units are interconnected
with a connection cable in the connection box.
Design
Luminaire body in natural anodised, extruded aluminium. With
continuous installation an unbroken
line of light is achieved, even via a
L-coupling.
Louvre
Opal – plate in frosted acrylic
(PMMA).
Miscellaneous
Accessories and cables, see Accessories.
22632 ■
22633 ■
Suffix code
Colour quality
MacAdam 4 SDCM
MacAdam 4 SDCM
■ -402 DALI
Add suffix code to the end of the luminaire part number to indicate required function.
For further information on LEDs, please refer to the Technical
Information chapter.
Opal flush, 600 mm
Opal flush, 1200 mm
Continuous coupler bends into the
frame for a single installation.
Continuous
Single
Module
600
1200
2400
A¹
589
1174
2343
A²
A¹+22
A¹+22
A¹+22
A¹+10⊗80
A¹+10⊗80
A¹+10⊗80
78.5
t
h
10–30 100
30–50 121
Total A¹
A¹ + A¹
A¹
585
1170
2339
Total A²
A¹ + A¹ + 26
Total A¹+10⊗80
A¹
h 100
102
t
80
146
90.5
A²
www.fagerhult.com • www.fagerhult.co.uk
The LED board is safeguarded by the
transparent contact protection with a
lens function.
Notor recessed LED
523
Straight luminaire
LED-module, lm, W Colour temp., K Length
Luminous flux, lm Efficiency, lm/W
1250, 9.8
3000
600
2500, 19.6
3000
1200
5000, 39.2
3000
2400
1250, 9.8
4000
600
906
75
2500, 19.6
4000
1200
1856
84
5000, 39.2
4000
2400
3712
84
* Not possible to be mounted as single luminaire in ceilings with visible T-bars (VTB).
For current information on output and luminous flux, please refer to our website.
Illuminated corners
LED-module, lm, W Colour temp., K Module Luminous flux, lm Efficiency, lm/W
2500, 19.6
3000
600⊗600
2500, 19.6
4000
600⊗600 1856
84
For current information on output and luminous flux, please refer to our website.
Information LED-Luminaire
Colour temp, (CCT) Ra (CRI) Life
3000 K
≥ 85
L70 50.000 h
4000 K
≥ 85
L70 50.000 h
kg
1.9
3.7
7.4
1.9
3.7
7.4
Start
22963 22964 22965 22966 22967 22968 ■
■
■
■
■
■
kg
3.5
3.5
Single/Cont./End
22969* ■
22970 ■
22971 ■
22972* ■
22973 ■
22974 ■
22630 ■
22631 ■
Suffix code
Colour quality
MacAdam 4 SDCM
MacAdam 4 SDCM
■ -402 DALI
Add suffix code to the end of the luminaire part number to indicate required function.
For further information on LEDs, please refer to the Technical
Information chapter.
Opal dropped,
600 mm
Opal dropped,
1200 mm
Illuminated L-coupling provides light
right into the corner.
Continuous
Single
Module
600
1200
2400
A¹
589
1174
2343
A²
A¹+22
A¹+22
A¹+22
A¹+10⊗80
A¹+10⊗80
A¹+10⊗80
78.5
t
h
10–30 100
30–50 121
h
Total A¹
A¹ + A¹
A¹
585
1170
2339
Total A²
A¹ + A¹ + 26
Total A¹+10⊗80
A¹
100
102114
t
80
71.5
90.5
A²
www.fagerhult.com • www.fagerhult.co.uk
Dummy section.
147
recessed
Installation
Luminaire for mounted in ventilated
or unventilated suspended ceilings.
Installed in suspended ceilings with
visible T-bars, VTB (25 or 15 mm) or
one-piece suspended ceilings.
Connection
Connection by means of a connection box on top of the luminaire.
Wieland Chassis connector 3-way
(GST 18i3), with dimming 5-way
(GST 18i5). In a continuous installation the luminaire row should
always start with a start luminaire.
With continuous installation the
luminaire units are interconnected
with a connection cable in the connection box.
Design
Luminaire body in natural anodised,
extruded aluminium. With continuous installation an unbroken line
of light is achieved, even via a
L-coupling.
Louvre
Opal – plate in frosted acrylic
(PMMA). The louvre hangs down
10 mm from the ceiling and provides ambient luminance to ceiling
and wall.
Miscellaneous
Accessories and cables, see Accessories.
pendant/surface
Opal dropped
Notor Recessed LED
Accessories
1
2
1. Mounting bracket
Mounting bracket/pair
91045
2. Dummy section
Dummy section 600 mm, Opal dropped
Dummy section 600 mm, Opal flush
91120
91121
3. End-cap
End-cap/pair, Opal flush
End-cap/pair, Opal dropped
91053
91054
4. Cover unit
Cover plate/pair provides IP 44 on dropped opal start luminaire used single
installation. Cover plate comes with start luminaire.
91055
Mains cable
1-phase, 3-way connectors (Wieland GST).
Mains cable, female, length 2.0 m
Mains cable, female + earthed plug, length 2.0 m
91789
91790
Connection cables, quick connection system, 3-way
White connection cable, female + male, cross-section 1.5 mm2, 1-phase,
3-way connectors (Wieland GST).
3
4
Length 1.0 m
Length 2.0 m
Length 2.5 m
Length 3.0 m
91791
91792
91074
91793
Mains cable
1-phase + dimming (Wieland GST) 5-way.
Mains cable, female, length 2.0 m
91022
Connection cables, quick connection system, 5-way
Black connection cable, female + male, cross-section 1.5 mm2, 1-phase + dimming
(Wieland GST) 5-way.
Length 1.0 m
Length 2.0 m
Length 2.5 m
Length 3.0 m
91030
91076
91077
91031
1.0 m
ex.
641
600 mm
Length
600+600 mm
600+1200 mm
600+2400 mm
1200+1200 mm
1200+2400 mm
2400+2400 mm
647
Inter-connecting cable
1.0 m
1.0 m
2.0 m
2.0 m
2.0 m
2.5 m
605
611
148
www.fagerhult.com • www.fagerhult.co.uk
1200 mm
Multilume Hydro
Environments with stringent hygiene requirements
must also have highly effective lighting and
Multilume Hydro was specifically developed to
address these needs. Not only does it provide professional work lighting, it also simplifies maintenance as it is easy to service and clean.
All screws, clips and fasteners are placed
inside to avoid the collection of dirt facilitating easy service and cleaning, with no dust
traps.
Multilume Hydro is designed for the T5
fluorescent lamp. This provides a number of
advantages including a high light output,
an economical service life and the possibility to save energy with an HF ballast.
1
2
1. The louvre module, which houses the louvre,
frame and protective glass, is secured to the body via
spring clips. The louvre module remains attached to
the body during service and maintenance work.
2. Luminaires for recessed mounting are fitted with
suspension attachments that are suitable for fixed
ceilings or suspended ceilings with visible T-bars.
Ceilings depth from 20 mm to 46 mm. The luminaire
is always mounted from the underside. Adjustment
and locking of the suspension fittings are carried out
from inside the luminaire body, all for easy and quick
installation.
232
www.fagerhult.com • www.fagerhult.co.uk
Multilume Hydro
523
IK10
Luminaire
FSQ-E
kg
Module
Recessed mounting
1⊗26
300⊗300 Opal
FDH
3⊗13/14
9.1
600⊗600 Clear
4⊗13/14
9.4
600⊗600 Clear
1⊗25/28 13.0
300⊗1200 Clear
2⊗25/28
9.4
300⊗1200 Clear
Surface mounting
2⊗25/28
9.7
300⊗1200 Clear
3⊗13/14 W
Suffix code
■ -03 Mains cable with earthed plug,
RKK 3⊗0.75 mm², L=2.5 m
23020
■
■ -205 1–10 V
■ -436 DALI/DSI/switchDIM
23021
23024
23022
23023
■
Add suffix code to the end of the luminaire part number to indicate required function. Only one suffix can be added.
23025
■
■
■
■
Installation
For recessed or surface mounting.
The recessed model is suitable
for fixed suspended ceilings or
suspended ceilings with visible
T-bars. Requisite suspension fittings
supplied. Ceiling thickness from
20–46 mm. The luminaire must
not be covered with insulation.
For further details please refer to
the assembly instructions on our
website.
Connection
Cable entries fitted with blanking
grommets on the top. 5-way snap-in
terminal block.
Design
Luminaire body of white enamelled
and anti-corrosive treated steel
sheet. Louvre frame of extruded aluminium fitted with impact resistant
PETG plastic protective glass. There
is a seal between the frame and
protective glass as well as between
the frame and body.
Louvre
Beta – double parabolic reflector
louvre with side and cross-blades of
satin matt, metallised aluminium
with excellent reflection characteristics (> 92 %), integrated into a
single unit. The frame with louvre is
screwed to the body using tamperproof torx screws. The louvre
remains attached when opened.
Earthed.
Reflector
The luminaire body is equipped
with a top reflector, one for each
lamp.
Miscellaneous
The luminaire has been designed
with a minimum of dirt collecting
surfaces, which facilitates cleaning.
Luminaire is IK 10 rated excluding
1⊗26 W version. IK – International
classification for mechanical protection; IK10 = highest class.
2⊗25/28 W
W
A1
“300”
26
299
25/28 1199
“600”
13/14 599
A2
B1
269 299
1171 299
571
599
B2
C
269
269
89 280⊗280
89 1180⊗280
569
89
B2
B1
W
25/28
A
1203
B
303
C
89
∅ 19
+
D
A2
C
C
A1
D
1100
580⊗580
∅ 19 +
+ ∅ 19
234
Robust Beta
B
A
www.fagerhult.com • www.fagerhult.co.uk
The frame with louvre is screwed to the
body using tamper-proof torx screws.
Indigo Ed2
Designed by Epsilon
The clean, simple design of Indigo Ed2 makes a clear
statement. Indigo Ed2 is the only luminaire in the
Indigo concept with a predominantly indirect light
distribution, offering a high degree of visual comfort
within the room.
The Indigo Ed2 luminaires are offered in a
variety of styles and variations. The indirect
light is distributed via the secondary reflector, giving Indigo Ed2 soft light distribution
and lighting that is sensed as balanced and
comfortable.
New to the family is Indigo Ed2 Hygiene –
a luminaire with a full glass cover for easy
cleaning.
178
www.fagerhult.com • www.fagerhult.co.uk
Indigo Ed2
523
Luminaire
FDH
Module 600⊗600
4⊗13/14
4⊗20/24
Suffix code
kg
VTB
7.3
7.3
24538
24539
■ -368 DALI/Phase-pulse control
Add suffix code to the end of the luminaire part number to indicate
required function.
■
■
Light source
W
Socket
830
Fluorescent lamp FDH
14
G5
81351
24
G5
81372
For further information please refer to the Light Sources chapter.
4-lamp, FDH
A1
W
4⊗13/14/20/24 596
A2
B1
B2
575
596
560
A⊗B
580⊗580
B1
A2
B2
128
t < 40
134
A1
The louvre frame remains attached
when opened.
www.fagerhult.com • www.fagerhult.co.uk
183
recessed
Installation
Luminaire for recessed installation in ventilated or unventilated
suspended ceilings. Installation
in suspended ceilings with visible
T-bars 25 or 15 mm or fixed suspended ceilings type plasterboard. Four
fixing brackets included.
Connection
The luminaire is equipped with
a 2.4 m mains cable and earthed
plug. Luminaires for dimming are
delivered with 5-core, free cable
tails, 5-way snap-in terminal block
2.5 mm².
Design
Body and reflector of white enamelled sheet steel (RAL 9016) structured finish. Louvre frame of white
enamelled sheet steel fitted with
toughened protective glass.
Louvre
Perforated white enamelled sheet
steel (RAL 9016) structured finish
with opal plastic diffuser on the
inside. The louvre remains attached
when opened.
Miscellaneous
Light sources to be ordered separately. Most models can also be
equipped with other ballasts for
dimming. Enclosure class IP 44 beneath suspended ceilings and IP 20
above suspended ceilings.
pendant/surface
R2 Perfo Hygiene
Pleiad G3
Pleiad G3 is the third generation of
Fagerhult’s successful downlight
range – now equipped with LED. In
common with its predecessors, the
focus was placed upon perfect lighting treatment, quick installation and
efficiency. In G3 these concept has
been taken to the next level, including automatic installation!
The energy efficiency and long lifespan of
LEDs come at the price of higher demands
on distribution and shielding due to the
increased light intensity. To combat these
issues G3 was developed using an innovative reflector technology which fully
exploits the efficiency of LEDs, without
affecting the lighting ergonomics. The family contains numerous options for different
light distributions, complemented by an
extensive range of practical and decorative
accessories.
Speed and ease of installation has long
been synonymous with the Pleaid range
and G3 takes this one step further. The
luminaire can be installed without any
manual effort. The housing needs only be
placed in the right position and then its
installed automatically with the help of
gravity technology. The rapid installation,
combined with high efficiency and long life,
ensures Pleiad G3 is an economical choice
with a beneficial pay-off time.
244
www.fagerhult.com • www.fagerhult.co.uk
Pleiad SLD G3
523
Surface mounted
Installation
Surface mounted installation.
Mounting plate with two securing
holes.
Connection
3-way snap-in terminal block
2.5 mm², through-wiring possible.
With dimming, 5-way snap-in
terminal block, through-wiring
possible. Cable entry from the top
of the luminaire or via 3 knock-out
openings, 90° or 180°.
Design
Luminaire body in white (RAL 9016)
cast aluminium.
Reflector
Reflector in either high gloss or
matt anodised aluminium. Specular
metallised Advanced Anti-Glare
Control ring above the LED module.
Mechanical shielding 45°.
Luminaire
Luminous flux, lm Efficiency, lm/W
LED module, lm, W Colour temp, K
1100, 12
3000
890
60
1100, 12
3000
845
57
1100, 11
4000
850
57
1100, 11
4000
811
55
2000, 24
3000
1454
57
2000, 24
3000
1392
56
2000, 22
4000
1579
62
2000, 22
4000
1558
61
For current information on output and luminous flux, please refer to our website.
Information LED luminaire
Colour temp, (CCT) Ra (CRI) Life
3000 K
≥ 80
L70 50.000 h
4000 K
≥ 80
L70 50.000 h
Reflector
Specular
Matt
Specular
Matt
Specular
Matt
Specular
Matt
72460
72461
72462
72463
72464
72465
72466
72467
■
■
■
■
■
■
■
■
Suffix Code
Colour quality
MacAdam 3 SDCM
MacAdam 3 SDCM
■ -365 TouchDIM/DALI
Add suffix code to the end of the luminaire part number to indicate required function.
For further information on LEDs, please refer to the Technical
Information chapter.
Specular reflector
Matt reflector
200
∅ 180
248
154
28
www.fagerhult.com • www.fagerhult.co.uk
Advanced Anti-Glare Control ring
mounted to the reflector.
Pleiad SLD Basic G3
523
Information LED luminaire
Colour temp, (CCT) Ra (CRI) Life
3000 K
≥ 80
L70 50.000 h
4000 K
≥ 80
L70 50.000 h
Reflector
Specular
Matt
Specular
Matt
72470
72471
72472
72473
Colour quality
MacAdam 5 SDCM
MacAdam 5 SDCM
downlights
For further information on LEDs, please refer to the Technical
Information chapter.
Specular reflector
Matt reflector
200
∅ 180
recessed
industrial
Luminaire
LED module, W
Colour temp, K
1100, 12
3000
1100, 12
3000
1100, 11
4000
1100, 11
4000
For current information on output and luminous flux, please refer to our website.
system
Installation
Surface mounted installation.
Mounting plate with two securing
holes.
Connection
3-way snap-in terminal block
2.5 mm², through-wiring possible.
Cable entry from the top of the luminaire or via 3 knock-out openings,
90° or 180°.
Design
Luminaire body in white (RAL 9016)
cast aluminium.
Reflector
Reflector in either specular or matt
anodised aluminium. Specular
metallised Advanced Anti-Glare
Control ring above the LED module.
Mechanical shielding 45°.
Miscellaneous
LED module includes ballast and
can easily be replaced via a bayonet
feature.
pendant/surface
Surface mounted
154
28
www.fagerhult.com • www.fagerhult.co.uk
LED module includes the ballast and
can easily be changed using the bayonet mount.
249
Pleiad Wallwasher G3
523
LED module, W
Colour temp, K
Reflector
1100, 12
3000
Specular
1100, 11
4000
Specular
2000, 24
3000
Specular
2000, 22
4000
Specular
2000, 30
2700–6500
Specular
For current information on output and luminous flux, please refer to our website.
Information LED luminaire
Colour temp, (CCT) Ra (CRI) Life
3000 K
≥ 80
L70 50.000 h
4000 K
≥ 80
L70 50.000 h
77990
77992
77991
77993
77994
■
■
■
■
Installation
Recessed mounting in unventilated
or ventilated ceilings. The luminaire
must not be covered with insulation. For further details please refer
to the assembly instructions on our
website. Separate ballast and installation clip for easy and tool-free
installation supplied as standard. An
assembly plate must be used when
mounting on soft tile ceilings.
Connection
Connections are made to an independent LED ballast. The luminaire
is delivered with the interconnecting cable with snap-in release in
ballast.
Design
Luminaire body in black cast
aluminium. Visible reflector ring in
white PC plastic (RAL 9003).
Reflector
Metallised PBT in specular aluminium. The reflector has a protective coat of scratch-resistant clear
lacquer.
Miscellaneous
The luminaire is supplied with dust
protection over the light opening.
Suffix code
Colour quality
MacAdam 3 SDCM
MacAdam 3 SDCM
■ -365 TouchDIM/DALI
Add suffix code to the end of the luminaire part number to
indicate required function.
For further information on LEDs, please refer to the Technical
Information chapter.
All versions
187
∅ 165
138
t Max 5–50
140
The reflector design delivers an even
luminance across the surface, avoiding
the traditional dark spots where the
wall and ceiling meets.
183
250
www.fagerhult.com • www.fagerhult.co.uk
Pleiad Robust G3
■
Pleiad Robust G3 Compact
LED module, W
Colour temp, K
Luminous flux, lm/m
1100, 12
3000
794
1100, 14
4000
767
2000, 24
3000
1337
2000, 22
4000
1350
For current information on output and luminous flux, please refer to our website.
Reflector
Matt
Matt
Matt
Matt
77429
77430
77431
77432
■
Information LED luminaire
Colour temp, (CCT) Ra (CRI) Life
Colour quality
MacAdam 3 SDCM
3000 K
≥ 80
L70 50.000 h
4000 K
≥ 80
L70 50.000 h
MacAdam 3 SDCM
For more information on LEDs, see Technical Chapter.
SLD
■
■
■
■
■
■
Suffix code
■ -365 TouchDIM/DALI
Add suffix code to the end of the luminaire part number to
indicate required function.
The light source is protected by a clear
plastic PEGT plate which is held by an
inner ring.
Compact
∅ 205
t Max 1–30
232
232
150
230
111
230
www.fagerhult.com • www.fagerhult.co.uk
recessed
system
77425
77426
77427
77428
industrial
Reflector
Matt
Matt
Matt
Matt
downlights
Pleiad Robust G3 SLD
LED module, W
Colour temp, K
Luminous flux, lm/m
1100, 12
3000
794
1100, 11
4000
767
2000, 23
3000
1337
2000, 21
4000
1350
For current information on output and luminous flux, please refer to our website.
Installation
Recessed mounting in unventilated
or ventilated ceilings. Assembly
springs for quick, tool-free installation included. An assembly plate
should be used when installing in
soft tile ceilings. The ballast box can
be detached for flexible installation.
Connection
Connections are made to an independent LED ballast. The luminaire
is delivered with the interconnecting cable with snap-in release in
ballast.
Design
Luminaire body in black cast
aluminium. Two-part visible decor
ring in aluminium. The luminaire
has durable PEGT plates in the light
openings between the rings. The
luminaire and the rings are locked
using tamper-proof torx screws.
Reflector
Reflector in matt anodised aluminium. Specular metallised Advanced
Anti-Glare Control ring above the
LED module.
Miscellaneous
The luminaire provides the highest
mechanical protection beneath
international classification IK10.
Enclosure class IP 64 beneath
suspended ceilings and IP 20 above
suspended ceilings. Light source
ordered separately.
pendant/surface
523
The ring is mounted using tamperproof torx security screws.
251
Easy
Easy is manufactured of cast aluminium and is extremely easy to
install in most types of suspended
ceilings. Available in white or
alu-grey, there are three different
designs; one fixed and two flexible.
The flexible models can be angled adjusted
through 0–90° or 0–30°, both can be swivelled through 355°.
The light distribution for Easy depends
on the choice of light source. The halogen
lamp HRGI comes in various designs with
several different distribution angles.
Easy can be supplemented with a black
baffle accessory to increase the mechanical
cut-off angle.
The LED and MV versions of Easy are the
perfect alternative for halls, kitchens and
bathrooms amongst other applications.
The retrofit lamp offers great choice as the
colour temperature and distribution angle
can be easily changed. The fitting can also
be adjusted from 0 –30°.
302
www.fagerhult.com • www.fagerhult.co.uk
Accessories
Assembly plate
Colour quality
MacAdam 5 SDCM
MacAdam 5 SDCM
41982
Light source
DR HAGS Light intensity, cd Socket Beam angle 2700 K 3000 K
7
1100
GU10 25°
81694
7
430
GU10 40°
81695
7
1400
GU10 25°
81696
7
650
GU10 25°
81697
For further information please refer to the Light Sources chapter.
For further information on LEDs, please refer to the Technical
Information chapter.
230 V LED Light source.
180⊗180
=∅ 72
≤ 26
30°
118
82
120
Max 28 W
Terminal block with strain relief and
through-wiring possible.
www.fagerhult.com • www.fagerhult.co.uk
recessed
system
downlights
Information LED-Luminaire
Colour temp. (CCT) Ra (CRI) Life
2700 K
≥ 80
L70 40.000 h
3000 K
≥ 80
L70 40.000 h
White
76932
industrial
Luminaire
DR HAGS
Turn/Tilt
1⊗7
0°/30°
For current information on output and luminous flux, please refer to our website.
Installation
Recessed mounting in unventilated
ceilings. The luminaire must not be
covered with insulation. For further
details please refer to the assembly
instructions on our website. Assembly springs for quick assembly
included. The assembly plate should
be used when mounting in soft ceilings, see accessories.
Connection
Connect to 230 V, terminal block
with possible through-wiring. Max
outer dimensions of the connection
cable 5⊗8 mm.
Design
Luminaire body of cast aluminium.
Assembly springs in spring steel.
White (RAL 9016) structured. The
luminaire tilts 30°.
Miscellaneous
IP 21 applies under suspended
ceilings. It can be dimmed using
incandescent lamp dimmers.
pendant/surface
Easy MV
DR HAGS
GU10
305
Marathon
Marathon is a stylish spotlight designed for track systems. Available in three different sizes its cylindrical
shape and clean design makes Marathon a spotlight
ideal for any setting.
Produced in a dramatic black or subtle white
finish, the luminaire housing and ballast are
constructed of aluminium and the front ring
of thermoplastic.
Positioning the direction of Marathon
is made easy, the luminaire can be turned
through 360° and the luminaire housing can
be angled 0–90°.
The metal halogen versions are available
with wide, medium and narrow beam, while
the light distribution in the HRGI version is
determined by the choice of light source.
Marathon is supplied as standard with an
electronic ballast.
Marathon is now also available in several
LED versions. The latest, Marathon Midi LED
iTrack, is a dimmable luminaire optimised
for Fagerhult’s iTrack system.
318
www.fagerhult.com • www.fagerhult.co.uk
Marathon Midi LED
523
Installation
Fitted to 3-phase track or FixPoint
bracket. Universal adapter 3-phase
included.
Design
Luminaire in white (RAL 9010) or
black (RAL 9005). Luminaire housing
and ballast in extruded/cast aluminium. Baffle of thermoplastic.
Reflector
Metallised reflector.
Miscellaneous
Marathon can be turned through
355° and angled 0–90°. Active
cooling.
Luminaire
LED module, lm, W Colour temp, K
Luminous flux, lm Efficiency, lm/W
Narrow beam
1100, 19
3000
1273
67
Medium beam
1100, 19
3000
1159
61
2000, 29
3000
1943
67
2000, 29
4000
2254
67
3000, 45
3000
2880
64
3000, 45
4000
3131
64
Wide beam
1100, 19
3000
1064
56
2000, 29
3000
1856
64
2000, 29
4000
2153
64
3000, 45
3000
2655
59
3000, 45
4000
2886
59
For current information on output and luminous flux, please refer to our website.
Information LED luminaire
Colour temp, (CCT) Ra (CRI) Life
3000 K
≥ 80
L70 50.000 h
4000 K
≥ 80
L70 50.000 h
kg
White
Black
1.1
79340
79343
1.1
1.1
1.1
1.1
1.1
79341
59690
79313
59691
79314
79344
79310
79316
79311
79317
1.1
1.1
1.1
1.1
1.1
79342
79319
79325
79320
79326
79345
79322
79328
79323
79329
Colour quality
MacAdam 3 SDCM
MacAdam 3 SDCM
For further information on LEDs, please refer to the Technical
Information chapter.
Narrow beam,
1100 lm
Medium beam,
1100 lm
Medium beam,
2000 lm
Medium beam,
3000 lm
Wide beam, 2000 lm
Wide beam, 3000 lm
173
137
320
www.fagerhult.com • www.fagerhult.co.uk
Marathon Midi LED in white.
Marathon Midi LED iTrack
Black
1.1
79340-402
79343-402
1.1
1.3
1.3
1.3
1.3
79341-402
59690-402
79313-402
79319-402
79325-402
79344-402
79310-402
79316-402
79322-402
79328-402
1.1
1.3
1.3
1.3
1.3
79342-402
59691-402
79314-402
79320-402
79326-402
79345-402
79311-402
79317-402
79323-402
79329-402
Colour quality
MacAdam 3 SDCM
MacAdam 3 SDCM
For further information on LEDs, please refer to the Technical
Information chapter.
Narrow beam,
1100 lm
Medium beam,
1100 lm
Medium beam,
2000 lm
207
Medium beam,
3000 lm
Wide beam, 2000 lm
Wide beam, 3000 lm
225
137
1100 lm
recessed
industrial
White
spotlights
Information LED luminaire
Colour temp, (CCT) Ra (CRI) Life
3000 K
≥ 80
L70 50.000 h
4000 K
≥ 80
L70 50.000 h
kg
downlights
Luminaire
LED module, lm, W Colour temp, K Luminous flux, lm Efficiency, lm/W
Narrow beam
1100, 19
3000
1273
67
Medium beam
1100, 19
3000
1159
61
2000, 29
3000
1943
67
2000, 29
4000
2254
78
3000, 45
3000
2880
64
3000, 45
4000
3131
69
Wide beam
1100, 19
3000
1064
56
2000, 29
3000
1856
64
2000, 29
4000
2153
74
3000, 45
3000
2655
59
3000, 45
4000
2886
64
For current information on output and luminous flux, please refer to our website.
system
Installation
Fitted to iTrack system. iTrack adapter included.
Design
Luminaire in enamelled white
(RAL 9010) or black (RAL 9005).
Luminaire housing and ballast in
extruded/cast aluminium. Baffle of
thermoplastic.
Reflector
Metallised reflector.
Dimming
DALI as standard.
Miscellaneous
Marathon can be turned through
355° and angled 0–90°. Passive and
active cooling.
pendant/surface
523
137
2000 lm + 3000 lm
www.fagerhult.com • www.fagerhult.co.uk
Marathon Midi LED iTrack in white.
319
Tibi
Designed by Olle Lundberg
Tibi produces a crisp, radiant light, floating in the
space with its distinct form. Its classical super ellipse
shape is maximised with advanced LED technology
to create a stunning light experience. Its extensive
range includes ceiling and wall luminaires which
have been optimised to use the most functional
control system on the market.
Careful consideration was paid towards the
selection of materials and high quality LED
units. Its distinctive, contemporary design
units the rectangles surface efficiency
with the circles aesthetic appeal. The even
illuminance across the globe enhances the
diffuser, constructed of smooth polished
acrylic, reminiscent of glass.
Tibi was developed as a complete luminaire family consisting of pendant, ceiling
and wall variations. A suspended luminaire
of 800 mm for large rooms is supported by
pendant, ceiling and wall luminaires in two
sizes – 600 mm and 400 mm. All models
are available with aluminium details in
two finishes: brushed and clear lacquered
aluminium or a polished, black lacquered
surface.
The ceiling and wall luminaires are ready
for use with the wireless control system
e-Sense Move, which lights up each floor
as and when someone enters. A perfect
solution for stairwells.
1
2
1. Tibi pendant, see page 349.
2. Tibi ceiling, see page 375.
3. Tibi wall, see page 397.
330
www.fagerhult.com • www.fagerhult.co.uk
3
523
Tibi
Information LED-Luminaire
Colour temp, (CCT) Ra (CRI) Life
4000 K
≥ 80
L70 50.000 h
Colour quality
MacAdam 4 SDCM
Brushed aluminium
54770-402
54771-402
54772-402
Accessories
Cutters
Black
54775-402
54776-402
54777-402
recessed
system
kg
3.3
5.7
9.0
industrial
Luminaire
System, W
Colour temp., K
∅
Luminous flux, lm Efficiency, lm/W
25
4000
400
1950
78
66
4000
600
5280
80
72
4000
800
6384
88
For current information on output and luminous flux, please refer to our website.
Installation
Two-point suspension,
c/c 53–78 mm.
Connection
Snap-in terminal block 5⊗2.5 mm²,
1-phase through-wiring possible.
Wire length 2.5 m and a 2.5 m white
fabric cord. Surface mounted cable
possible. Height adjustment is done
on the luminaire via a friction lock.
Design
Diffuser in specular opal acrylic.
Luminaire body/decorative edge
ring in aluminium. Decorative
edge ring lacquered in glossy black
(RAL 9005) or clear lacquered brushed aluminium. Colour-coordinated
ceiling cup.
Dimming
DALI dimming as standard.
Miscellaneous
A cut-out in the ceiling cup is made
using cutters 94248 for a surface
mounted mains cable.
Designed by
Olle Lundberg.
pendant/surface
Pendant
94248
architectural
spotlights
downlights
For further information on LEDs, please refer to the Technical
Information chapter.
Excess wire is inserted into the void in
the casting.
138/200/270
400/600/800
Colour-coordinated ceiling cup attached
by magnet without visible screws.
www.fagerhult.com • www.fagerhult.co.uk
349
Tibi
Information LED-Luminaire
Colour temp, (CCT) Ra (CRI) Life
4000 K
≥ 80
L70 50.000 h
Suffix code
Colour quality
MacAdam 4 SDCM
recessed
Add suffix code to the end of the luminaire part number to indicate required function. Only one suffix can be added.
architectural
spotlights
downlights
For further information on LEDs, please refer to the Technical
Information chapter.
■ -439 e-Sense Detect
■ -440 e-Sense Move
system
Black
56775-402 ■
56776-402 ■
industrial
Luminaire
System, W
Colour temp., K ∅
Luminous flux, lm Efficiency, lm/W kg
Brushed aluminium
27
4000
400
1638
61
3
56770-402 ■
48
4000
600
3493
73
6
56771-402 ■
Other suffix code replaces -402. For current information on output and luminous flux, please refer to our website.
Installation
Two securing holes for wall mounting. IP 40. IP 41 is available upon
request.
Connection
Snap-in terminal block 5⊗2.5 mm²,
1-phase through-wiring possible.
Cable entry from top of the luminaire. Surface mounted mains cable
possible, through-wiring 180°.
Design
Diffuser in specular opal acrylic. Luminaire body/decorative edge ring
in aluminium. Decorative edge ring
lacquered in glossy black (RAL 9005)
or clear lacquered brushed aluminium.
Dimming
DALI dimming as standard.
e-Sense Detect – microwave sensor
for on/off function, or absence dimming with the option of switch-off
function.
e-Sense Move – wireless control between luminaires. Microwave sensor
for the on/off function, or absence
dimming with the option of switchoff function. For further information
please refer to the dimming section
in the Technical chapter.
Designed by
Olle Lundberg.
pendant/surface
Wall
12/11
115/167
400/600
263/435
Decorative edge ring lacquered in
glossy black or clear lacquered brushed
aluminium.
www.fagerhult.com • www.fagerhult.co.uk
397
Tibi
Information LED-Luminaire
Colour temp, (CCT) Ra (CRI) Life
4000 K
≥ 80
L70 50.000 h
Suffix code
Colour quality
MacAdam 4 SDCM
recessed
Add suffix code to the end of the luminaire part number to indicate required function. Only one suffix can be added.
architectural
spotlights
downlights
For further information on LEDs, please refer to the Technical
Information chapter.
■ -439 e-Sense Detect absence dampening
■ -440 e-Sense Move absence dampening
system
Black
56775-402 ■
56776-402 ■
industrial
Luminaire
System, W
Colour temp., K ∅
Luminous flux, lm Efficiency, lm/W
Brushed aluminium
27
4000
400
1638
61
3
56770-402 ■
48
4000
600
3493
73
6
56771-402 ■
Other suffix code replaces -402. For current information on output and luminous flux, please refer to our website.
Installation
Two securing holes for ceiling installation. Protection class IP 41.
Connection
Snap-in terminal block 5⊗2.5 mm²,
1-phase through-wiring possible.
Cable entry from top of the luminaire. Surface mounted mains cable
possible, through-wiring 180°.
Design
Diffuser in specular opal acrylic. Luminaire body/decorative edge ring
in aluminium. Decorative edge ring
lacquered in glossy black (RAL 9005)
or clear lacquered brushed aluminium.
Dimming
DALI dimming as standard.
e-Sense Detect – microwave sensor
for absence dimming with the
option of switch-off function.
e-Sense Move – wireless control
between luminaires. Microwave
sensor for absence dimming with
the option of switch-off function.
For further information please
refer to the dimming section in the
Technical chapter.
Designed by
Olle Lundberg.
pendant/surface
Ceiling
12/11
115/167
400/600
263/435
The luminaire can also be mounted
on wall.
www.fagerhult.com • www.fagerhult.co.uk
375
D63
Designed by Henning Solfeldt, PLH arkitekter
Can a luminaire really be this small? With a diameter
of just 63 mm, D63 is the perfect choice for conference
rooms, corridor, cafes, restaurants and other applications which focus on furnishing and interior design.
D63 is a complete luminaire family, consisting of pendant, ceiling and wall variations.
The ceiling model is semi-recessed for an
extra chic impression and is a new and
fresh alternative to recessed spotlights. The
wall luminaire is IP44 rated, lending itself
bathroom, spar and relaxation environments, not to mention as an eye catching
compliment above a mirror.
The effective, glare-free LED unit defies
its size with a generous output, while the
opal acrylic louvre generates a crisp effect
when lit.
1
2
1. D63 Pendant, see page 370.
2. D63 Ceiling, see page 387.
2. D63 Wall, see page 407.
344
www.fagerhult.com • www.fagerhult.co.uk
3
523
D63
Pendant
Luminaire
System, W
Colour temp., K
Luminous flux, lm
Efficiency, lm/W
9
3000
366
41
For current information on output and luminous flux, please refer to our website.
Information LED-Luminaire
Colour temp, (CCT) Ra (CRI)
3000 K
≥ 80
Life
Colour quality
L70 50.000 h MacAdam 3 SDCM
Accessories
Cutters/each
Installation
Two point suspension.
Connection
Connects with 230 V, built-in LED
ballast in ceiling cup. Snap-in terminal block 3⊗2.5 mm².
Through-wiring possible. Surface
mounted cable possible.
Design
Luminaire body in cast aluminium,
structured grey (RAL 9006) finish.
Diffuser in opal acrylic. Grey finish
ceiling cup. Supplied with a 3 m
white cable.
Dimming
Dimming possible using a trailing
edge dimmer. Dimmable LED ballast
as standard.
Miscellaneous
A cut-out in the ceiling cup is made
using cutters 94248 for a surface
mounted mains cable.
Designed by
Henning Solfeldt, PLH Arkitekter.
54801
94248
For further information on LEDs, please refer to the Technical
Information chapter.
Luminaire body in cast aluminium.
112
80
⍉ 63
370
www.fagerhult.com • www.fagerhult.co.uk
Colour-coordinated ceiling cup with
integrated LED ballast.
523
D63
Luminaire
System, W
Colour temp., K
Luminous flux, lm
Efficiency, lm/W
13
3000
520
40
For current information on output and luminous flux, please refer to our website.
Life
Colour quality
L70 50.000 h MacAdam 3 SDCM
recessed
56801
Accessories
Mounting plate for soft tile ceilings
industrial
Information LED-Luminaire
Colour temp, (CCT) Ra (CRI)
3000 K
≥ 80
system
Installation
Semi-recessed in non-ventilated
ceilings. Assembly springs for quick
assembly included. The mounting plate should be used when
mounting in soft tile ceilings, see
accessories.
Connection
Connects with 230 V. LED ballast
on mounting plate is placed above
ceilings. Snap-in terminal block
3⊗2.5 mm², through-wiring possible.
Design
Luminaire body in cast aluminium,
grey (RAL 9006) structured finish.
Diffuser in opal acrylic.
Dimming
Dimming possible using a trailing
edge dimmer. Dimmable LED ballast
as standard.
Designed by
Henning Solfeldt, PLH arkitekter.
pendant/surface
Ceiling
41982
architectural
spotlights
downlights
For further information on LEDs, please refer to the Technical
Information chapter.
Mounting plate with LED ballast and
terminal block with possible throughwiring is placed above ceilings.
30
80
∅ 45
t Max 26
The diffuser produces light on the ceiling with good mechanical shielding.
∅ 63
www.fagerhult.com • www.fagerhult.co.uk
387
523
D63
Luminaire
System, W
Colour temp., K
Luminous flux, lm
Efficiency, lm/W
9
3000
366
41
For current information on output and luminous flux, please refer to our website.
Life
Colour quality
L70 50.000 h MacAdam 3 SDCM
64801
Accessories
Cutters/each
industrial
Information LED-Luminaire
Colour temp, (CCT) Ra (CRI)
3000 K
≥ 80
recessed
system
Installation
On walls with two securing holes.
Protection class IP 44.
Connection
Connects with 230 V, built-in LED
ballast. Snap-in terminal block
3⊗2.5 mm². Through-wiring possible. Cable entry on rear of the
luminaire.
Design
Luminaire body in cast aluminium,
structured grey (RAL 9006) finish.
Diffuser in opal acrylic.
Dimming
Dimming possible using a trailing
edge dimmer. Dimmable LED ballast
as standard.
pendant/surface
Wall
94248
architectural
spotlights
downlights
For further information on LEDs, please refer to the Technical
Information chapter.
The luminaire provides a comfortable
light and a glare-free LED module.
80
∅ 63
125
111
www.fagerhult.com • www.fagerhult.co.uk
Luminaire body in cast aluminium with
integrated LED ballast.
407
Discovery
Both sizes can be surface and semi-recessed
mounted. Surface mounting gives a decora-
recessed
The round beam Discovery family is ideal for
many areas of application. The smaller Discovery
is complemented by Discovery Space, a slightly
larger version constructed of the same materials
to maintain the robust design. The range has now
been further expanded to include an LED version,
offering even greater efficiency.
pendant/surface
Designed by Wilma Daemen
tive trailing light on the wall.
and add a decorative touch to this type of
luminaire. Please note that the accessories
architectural
spotlights
downlights
industrial
only fit Discovery.
system
Accessories expand the range further
1
2
3
1. Discovery, see page 388.
2. Discovery Space, see page 389.
2. Discovery Space LED, see page 390.
www.fagerhult.com • www.fagerhult.co.uk
345
Discovery Space LED
523
Luminaire
System, W
Colour temp., K
Luminous flux, lm
Efficiency, lm/W
kg
Acrylic
11
3000
700
64
1.5
20
3000
1200
60
1.5
PC
11
3000
650
59
1.5
20
3000
1150
58
1.5
For current information on output and luminous flux, please refer to our website.
Information LED-Luminaire
Colour temp, (CCT) Ra (CRI) Life
3000 K
≥ 80
L70 50.000 h
57701
57702 ■
57703 ●
57704 ■
Suffix Code
● -219 e-Sense smartSwitch on/off
Colour quality
MacAdam 4 SDCM
■ -438 1–10 V
■ -357 e-Sense Detect on/off
For further information on LEDs, please refer to the Technical
Information chapter.
■ -439 e-Sense Detect absence dampening
■ -431 e-Sense Move on/off
■ -440 e-Sense Move absence dampening
Add suffix code to the end of the luminaire part number to indicate required function. Only one suffix can be added.
Accessories
Recess brackets, 4 pcs
Diffuser lock/10 pcs. (1 per luminaire)
Decor casing, white
Robust case gives IP 65, white (IK10 with PC-diffuser)
Installation
Four fixing holes. Surface mounted
or semi-recessed on ceilings or
walls. Brackets for recessed installation ordered separately, please see
accessories.
Connection
Snap-in terminal block 5⊗1.5 mm²,
3-phase through-wiring possible.
Surface mounted mains cable
possible, through-wiring 0° or 180°.
Three ∅ 16 mm cable entries fitted
with blanking grommets on the top
of the luminaire.
Design
Polycarbonate luminaire body and
impact resistant acrylic or polycarbonate diffuser.
Accessories
Trim ring and outer casing in white
or grey (RAL 9006) aluminium.
Robust case of cast aluminium. An
aluminium ring seals tight against
the ceiling or wall. Four security
screws (tamper-proof torx) IP 65.
IK10 in PC.
Dimming
e-Sense smartSWITCH – luminaire
with PIR sensor for presence detection on/off. IP 43 in ceiling, IP 20 on
wall.
e-Sense Detect – microwave sensor
for on/off function , or absence dimming with the option of switch-off
function.
e-Sense Move – wireless lighting
control between luminaires. Microwave sensor for on/off function, or
absence dimming with the option of
switch-off function.
Designed by
Wilma Daemen.
94605
93889
93371
93381
∅ 345
91
111
63
∅ 384
∅ 384
Robust
124
∅ 414
390
www.fagerhult.com • www.fagerhult.co.uk
Robust case of cast aluminium with
security screws.
The concept increases personal safety
considerably by almost eliminating the risk
recessed
Fagerhult’s emLED concept builds on a high intensity
LED which is only used for emergency lighting. The
LED almost never wears out since it is only used in
emergency mode and when the test sequences are
run.
pendant/surface
emLED
of the emergency light failing to work. In a
source is used in normal operation and
emergency mode, there is a risk that the
light source may have burned out or ceased
system
traditional solution, where the same light
to operate when a crisis situation arises.
several different designs. emLED-s2, -s4,
-s5 and -sc – where the same unit is used
for both surface mounted and recessed
industrial
emLED exists as a stand-alone unit in
installation where the ballast and batteries
are concealed above the ceiling and only
the LED visible. During a power failure the
emLED-s2, -s4, -s5 and -μ are operated by
downlights
installation. emLED-μ is a unit for recessed
ated by a centrally connected emergency
emergency
architectural
lighting system.
spotlights
integrated batteries and emLED-sc is oper-
www.fagerhult.com • www.fagerhult.co.uk
427
emLED-s2 , emLED-s4, emLED-s5
Live 1
Neutral
Protective earth
Monitor
Monitor
I/O m.m.
+
–
C
NC
– +
–+
24 VDC
(min 30 mA)
There is a relay module, 98158, used when a large number of 98153 emLED-s2 or 99102 emLED-s4 connected in monitoring systems. The relay module, should be connected to an external voltage source of
2 VV DC and is designed for mounting on DIN-rails and has a 1-module width.
∅ 103,5
∅ 100
∅ 41,5
∅ 120
www.fagerhult.com • www.fagerhult.co.uk
429
recessed
system
industrial
downlights
Wiring diagram – overview
spotlights
98152
41982
98158
architectural
kg Monitoring via
emLED-s2 0.3 Potential free contact
98153
emLED-s4 0,3 Potential free contact
99102
emLED-s5 0.3 DALI
99103
emLED-s4 and -s5 are versions with higher luminous flux in
emergency mode. Can be fitted with a longer c/c compared to
emLED-s2 (see table in the introduction).
emergency
Accessories
Spare battery
Assembly plate for soft tile ceiling
Relay module emLED-s
Luminaire
Installation
Optional either surface or recessed
mounting in ventilated or unventilated areas. c/c between securing
holes is optional 38, 55, 60, 67 and
78 mm. Recessed mounting requires
a ceiling thickness of between 5 and
25 mm.
Connection
Phase, neutral conductor protective earth and monitoring cables.
Equipped as standard with a 2 way
output for the connection of the
master system based on the detection of potential free contact (NC) or
communication via DALI. All connections are gathered in the luminaire
body in a snap-in, 6-way terminal
block. The detachable lower section
housing the electronics and battery
where applicable is connected to
the terminal block in the luminaire
body with a “plug-in” connection.
Through-wiring of 2.5 mm² cable is
possible (all positions). 4⊗16 mm
cable entries fitted with blanking
grommets on the top. Strain relief
for movable cables with recess
mounting supplied.
Design
For 230 V AC 50/60 Hz. Enclosure
class IP 40, protection class I. Plastic
parts of PC/ABS plastic. Spring
clips for recess mounting made of
stainless spring steel. NiMH battery
and two-colour (green/red) status
diodes. Equipped with self-test as
standard (Autotest IV, see separate
section) equivalent to standard EN
62034 and with the possibility of external monitoring either via a potential free contact or DALI dependent
on product selection. Equipped with
test button for manually starting
the short function test.
Miscellaneous
Decentralised emergency light function, 3 hours operation in emergency
lighting mode. White LED only works
in emergency mode (non-maintained). The product conforms to the
requirements set out in IEC 60068-26 test FC and IEC 60068-2- 64 test
Fh and DNV Cert. Notes No.2.4 April
2006, with requirements including made on products intended for
marine use or other environments
where the risk of vibrations. Some
monitoring systems based on the
detection of potential free contact
can be sensitive to signal purity.
When a large number of 98153
emLED-s2 or 99102 emLED-s4 are
connected to a monitoring system
an emLED relay module, 98158,
is required. The relay module is
connected to an external voltage
source, 2VV DC, and is designed to
be mounted on DIN-rails and has a 1
module width.
pendant/surface
523