CONTENTS
Pages
DRILL BITS & CHISELS
• Core Bits
• SDS Plus Bits and Chisels
• SDS Max Bits and Chisels
• Straight Shank Percussion
• Ti-Awl® Tile Bits
• Ship Auger Bits
1-5
Bits
ADHESIVE ANCHORING
FLO-ROK® Injection Systems
CRACKFAST® Crack Repair Kit
Rockite Cement
Rod Assemblies
Steel Screens
•
•
•
•
•
5-7
MEDIUM & HEAVY DUTY ANCHORS
• Heavy Load Anchors
• Wedge Anchors
• Drop-in Anchors
• Sleeve Anchors
• Lag Shields
• Single Expansion Shields
• Double Expansion Shields
8 - 11
LIGHT DUTY ANCHORS
•
•
•
•
•
•
•
•
Lead Anchors
Nylon Pin Bolts
Zamac Pin Bolts
Metal Frame Anchor
Renovation Anchors
Drive Screw Anchors
Screw Plugs & Anchors
MJP Insulation Fasteners
12 -13
HOLLOW WALL ANCHORS
• Tip Toggle
• Toggle Bolts
• Nylon Toggle
• Metal Hollow Wall Anchors
14
SPECIALTY ANCHORS
•
•
•
•
•
i
SCRU-IT®
U-DRIVE®
CB Screws
Acoustic Lag Screws
U-DRIVE® Stress Plate
8, 15-17
www.ucanfast.com
CONTENTS
Pages
DIRECT FASTENING
•
•
•
Power Loads
Low Velocity Tools
Pins and Studs for all makes
18 - 20
SELF DRILLING SCREWS AND ACCESSORIES
• Wood to Metal Fasteners
• Metal to Metal Fasteners
• Screwdriver Accessories
• Sealing Washers
21 - 26
SUPER PAKS
GREAT FOR TRADESMEN Super Pak Jars have a large 3-1/4" diameter opening, with a secure screw on lid to
prevent spillage. They are made of a durable crystal clear plastic so that the contents are easy to identify. Super
Pak fits most service truck racking and is not too large for many tool carriers.
MASONRY ANCHORS
•
•
Plastic Plugs
Zamac Pin Bolts
HOLLOW WALL ANCHORS
•
•
27 - 28
Zamac Twister
Nylon Twister
METAL FASTENERS
OVER 50 SIZES
•
•
TECHNICAL DATA
Self Drilling Screws
Sharp Point Self Tapping Screws
PAGES 30 - 31
SIZES SHOWN IN RED ARE NEW STOCK ITEMS.
mm SIZES SHOWN IN GREEN ARE TRUE METRIC DIN STANDARD.
OTHER METRIC SIZES SHOWN ARE METRIC CONVERSION SIZES.
UCAN PRODUCTS ARE SUPPLIED EXCLUSIVELY BY DISTRIBUTORS COAST TO COAST.
PRICES SHOWN ARE SUBJECT TO ALL APPLICABLE SALES TAXES.
ALL WEIGHTS ARE SHOWN IN POUNDS (lb).
ii
CONCRETE DRILLING
CARBIDE TIPPED DRILL BITS
UCAN carbide tipped drill bits are designed for fast, accurate drilling of correctly sized holes which are needed
to ensure optimum anchor performance. All fractional inch sizes conform to ANSI tolerances and metric sizes
adhere to DIN standards. Improved flutes remove dust efficiently to prevent heat build-up and increase bit life.
ULTRAPLUS® PREMIUM SDS PLUS
SDS PLUS DRILL BITS
Dynamic, chisel shaped drill point and patented multiflute deliver superior speed and endurance.
• Ultra fast drilling
• Extra long life in concrete
Manufactured to
• Drills natural stone
B 212.15 Standard
Four cutter carbide tip provides superior performance in
reinforced concrete, rock and granite, and extra long life in
concrete compared to our regular SDS plus bit. Improved
fluting reduces friction and accelerates dust removal. Will
cut through rebar up to 10M.
Part No.
Manufactured to
B 212.15 Standard
Part No.
Diameter
(inch)
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
SDU
3/16 ANSI
3/16 ANSI
1/4 ANSI
1/4 ANSI
1/4 ANSI
1/4 ANSI
1/4 ANSI
5/16 ANSI
3/8 ANSI
3/8 ANSI
3/8 ANSI
1/2 ANSI
1/2 ANSI
1/2 ANSI
5/8 ANSI
5/8 ANSI
5/8 ANSI
3/4 ANSI
3/4 ANSI
3/4 ANSI
7/8 ANSI
7/8 ANSI
7/8 ANSI
1 ANSI
1 ANSI
1 1/8 ANSI
1 1/8 ANSI
3164
3166
144
146
148
1410
1412
5166
386
3812
3818
126
1212
1218
588
5812
5818
348
3412
3418
788
7810
7812
112
118
11810
11818
Length (inches)
Overall
Usable
4-1/4
6-1/4
4-1/4
6-1/4
8-1/4
10
12
6-1/4
6-1/4
12-1/4
18
6-1/4
12-1/4
18
8
12
18
8
12
18
8
10
12
12
18
10
18
2
4
2
4
6
8
10
4
4
10
16
4
10
16
6
10
16
6
10
16
6
8
10
10
16
8
16
Price
/ea.
23.60
24.70
22.50
23.60
33.20
45.00
61.80
32.10
34.90
57.30
88.80
42.80
66.30
88.80
67.60
83.60
101.90
96.20
119.10
130.60
114.50
131.70
147.70
180.90
200.40
183.20
219.80
ULTRAPLUS CONTRACTOR-PAKS
Manufactured to
B 212.15 Standard
Part No.
Diameter
(inch)
SDU
SDU
SDU
SDU
SDU
SDU
3/16 ANSI
3/16 ANSI
1/4 ANSI
1/4 ANSI
3/8 ANSI
1/2 ANSI
1
3164B
3166B
144B
146B
386B
126B
Length (inches)
Overall
Usable
4-1/4
6-1/4
4-1/4
6-1/4
6-1/4
6-1/4
2
4
2
4
4
4
Pkg
Qty
Price
/ea.
25
25
25
25
25
20
21.40
19.70
16.90
19.10
29.80
38.30
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
5324
5326
3164
3166
3168
7324
7326
15644
15646
15648
144
146
148
1411
1420
9326
5166
5168
386
388
3812
3818
3824
25646
25648
7166
15326
15328
153224
126
128
1210
1212
1218
9166
19328
586
588
5812
5818
5824
456412
348
3412
3418
25328
27328
7812
616412
112
118
(in)
5/32
5/32
3/16
3/16
3/16
7/32
7/32
15/64
15/64
15/64
1/4
1/4
1/4
1/4
1/4
9/32
5/16
5/16
3/8
3/8
3/8
3/8
3/8
25/64
25/64
7/16
15/32
15/32
15/32
1/2
1/2
1/2
1/2
1/2
9/16
19/32
5/8
5/8
5/8
5/8
5/8
45/64
3/4
3/4
3/4
25/32
27/32
7/8
61/64
1
1
Diameter
(mm)
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
DIN
DIN
DIN
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
DIN
DIN
ANSI
DIN
DIN
DIN
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
DIN
ANSI
ANSI
ANSI
ANSI
ANSI
DIN
ANSI
ANSI
ANSI
DIN
ANSI
ANSI
DIN
ANSI
ANSI
4
4
5
5
5
5.5
5.5
6
6
6
6.5
6.5
6.5
6.5
6.5
7
8
8
9.5
9.5
9.5
9.5
9.5
10
10
11
12
12
12
13
13
13
13
13
14
15
16
16
16
16
16
18
19.1
19.1
19.1
20
21.4
22
24
25.4
25.4
Length (in)
Overall
Usable
4-1/4
6-1/4
4-1/4
6-1/4
8-1/4
4
6-1/4
4
6
8
4-1/4
6-1/4
8-1/4
11
20
8
6-1/4
8
6-1/4
8-1/4
12-1/4
18
24
6
8
6-1/4
6
8
24
6-1/4
8
10-1/4
12-1/4
18
6-1/4
8
6-1/4
8
12
18
24
12
8
12
18
8
8
12-1/4
10
12
18
2-1/4
4-1/4
2-1/4
4-1/4
6-1/4
2
4-1/4
2
4
5-3/4
2-1/4
4-1/4
5-3/4
9
18
6
4-1/4
5-3/4
4-1/4
6-1/4
10-1/4
16
22
4
6
4-1/4
4
6
22
4-1/4
6
8-1/4
10-1/4
16
4-1/4
6
4-1/4
6
10
16
22
10
6
10
16
6
6
10-1/4
8
10
16
Qty.
25
25
25
25
25
25
25
25
25
25
25
25
25
25
20
25
25
25
25
25
15
10
20
25
15
25
25
1
10
25
25
25
20
20
20
1
20
20
20
15
10
10
15
10
10
20
1
10
1
10
10
Price
/ea.
14.10
18.00
11.90
13.20
19.70
13.80
16.90
15.70
17.50
19.70
12.40
13.80
20.10
41.10
82.10
16.90
16.60
20.80
16.60
25.30
36.00
57.30
79.80
25.50
35.20
25.30
23.30
38.80
72.50
22.10
35.20
40.50
47.20
63.50
30.90
47.70
35.20
39.40
52.80
85.40
105.70
79.30
66.30
81.50
85.40
78.70
89.40
96.70
115.80
129.30
154.00
mm Sizes shown in GREEN are true metric DIN standard.
Other metric sizes shown are metric conversion sizes.
www.ucanfast.com
CONCRETE DRILLING
ULTRAMAX® PREMIUM SDS MAX
SDS PLUS CONTRACTOR-PAKS
Manufactured to
B 212.15 Standard
Manufactured to
B 212.15 Standard
New size in red
Diameter
(in)
(mm)
Part No.
SDB
SDB
SDB
SDB
SDB
SDB
SDB
SDB
SDB
SDB
SDB
SDB
SDB
SDB
SDB
SDB
SDB
SDB
5324
5326
3164
3166
3168
144
146
148
1411
5166
386
3812
15326
126
1210
586
588
788
5/32 ANSI
5/32 ANSI
3/16 ANSI
3/16 ANSI
3/16 ANSI
1/4 ANSI
1/4 ANSI
1/4 ANSI
1/4 ANSI
5/16 ANSI
3/8 ANSI
3/8 ANSI
15/32 DIN
1/2 ANSI
1/2 ANSI
5/8 ANSI
5/8 ANSI
7/8 ANSI
Length (in)
Overall usable
4
4
5
5
5
6.5
6.5
6.5
6.5
8
9.5
9.5
12
13
13
16
16
22
4-1/4
6-1/4
4-1/4
6-1/4
8-1/4
4-1/4
6-1/4
8-1/4
11
6-1/4
6-1/4
12-1/4
6
6-1/4
10-1/4
6-1/4
8
8
2-1/4
4-1/4
2-1/4
4-1/4
6-1/4
2-1/4
4-1/4
5-3/4
9
4-1/4
4-1/4
10-1/4
4
4-1/4
8-1/4
4-1/4
6
6
Qty.
Price
/each
25
25
25
25
25
25
25
25
25
25
25
20
20
20
20
15
15
5
13.20
14.50
11.00
11.30
17.90
9.55
10.20
16.80
39.40
14.30
14.30
33.20
20.00
18.60
38.30
34.00
38.30
82.10
Qty.
Price
/each
250
200
250
200
250
200
150
125
100
12.40
12.40
10.30
9.30
9.35
9.55
13.20
13.50
16.30
SDS PLUS BITS - BULK
Diameter
(in)
(mm)
Part No.
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
SDS
5324B
5326B
3164B
3166B
144B
146B
5166B
386B
126B
5/32 ANSI
5/32 ANSI
3/16 ANSI
3/16 ANSI
1/4 ANSI
1/4 ANSI
5/16 ANSI
3/8 ANSI
1/2 ANSI
Length (in)
Overall usable
4
4
5
5
6.5
6.5
8
9.5
13
4-1/4
6-1/4
4-1/4
6-1/4
4-1/4
6-1/4
6-1/4
6-1/4
6-1/4
2-1/4
4-1/4
2-1/4
4-1/4
2-1/4
4-1/4
4-1/4
4-1/4
4-1/4
Diameter
(in)
(mm)
SFB 3166B
3/16
5
Length (in)
Overall
usable
6
3-3/4
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
1213
1221
91613
91621
5813
5821
5836
456413
3413
3421
3436
7813
7821
7836
616413
113
121
136
176415
11817
11821
11836
11415
11423
11436
13823
13836
11223
13423
223
1/2
1/2
9/16
9/16
5/8
5/8
5/8
45/64
3/4
3/4
3/4
7/8
7/8
7/8
61/64
1
1
1
1-7/64
1-1/8
1-1/8
1-1/8
1-1/4
1-1/4
1-1/4
1-3/8
1-3/8
1-1/2
1-3/4
2
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
DIN
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
DIN
ANSI
ANSI
ANSI
DIN
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
ANSI
13
13
14
14
16
16
16
18
19.1
19.1
19.1
22
22
22
24
25.4
25.4
25.4
28
29.8
29.8
29.8
32
32
32
35
35
38
44.5
50.8
Length (in)
Overall Usable
13
21
13
21
13
21
36
13
13
21
36
13
21
36
13
13
21
36
14.5
17
21
36
15
23
36
23
36
23
23
23
8
16
8
16
8
16
31
8
8
16
31
8
16
30
8
8
16
31
9.5
12
16
31
10
18
31
18
31
18
18
18
Price
/ea.
61.80
92.70
80.90
91.00
77.60
104.60
213.50
92.70
84.30
106.80
225.90
91.60
122.50
245.00
116.90
106.20
128.10
249.50
169.70
166.40
170.80
274.20
160.70
184.30
274.20
216.90
351.80
243.80
314.70
393.30
SPLINE SHANK BITS
SDS PLUS FORMING BITS - BULK
Part No.
Part No.
Diameter
(in)
(mm)
Qty.
Wt.
Price
/each
200
17
5.60
Part No.
Diameter
(in)
(mm)
JOS
JOS
JOS
JOS
JOS
JOS
JOS
JOS
JOS
1/2
1/2
5/8
5/8
5/8
3/4
3/4
7/8
1
1210
1216
5810
5816
5821
3416
3421
7816
121
13
13
16
16
16
19
19
22
25.4
Length (in)
Overall Usable
10
16
10
16
22
16
22
16
22
5
11
5
11
17
11
17
11
17
Price
/ea.
58.50
66.30
71.40
80.90
94.40
85.45
101.20
103.40
113.50
SDS PLUS CHISELS
ADAPTORS FOR SDS PLUS BITS
Part No.
Description
CHP S11
CHI S11
CHI S18
CHS S11
CHG S11
11"
10"
18"
11"
11"
Bull point chisel
X 1" Flat
X 1" Flat
X 2" Scaling chisel
X 1" Gouge chisel
Price/ea.
20.30
20.30
25.50
36.00
33.20
Part No.
Description
JOM SDS
JOS SDS
SDS MAX to SDS adaptor
Spline to SDS adaptor
Price/ea.
87.70
78.70
2
CONCRETE DRILLING
SDS MAX SINGLE PIECE CORE BITS
ULTRAMAX® HOLE CUTTERS
Each bit includes starter bit and drift key
Up to 80% faster than core bits
Part No.
Diameter
(in)
(mm)
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
MAX
1-1/2
1-3/4
2
2-5/8
3-1/8
3-1/2
4
5
6
CB11222
CB13422
CB222
CB25822
CB31822
CB31222
CB422
CB522
CB622
Length
(in)
38
44.5
50.8
66.7
79.4
89
101.6
127
152.4
22
22
22
22
22
22
22
22
22
Price
/ea.
328.10
345.00
358.50
428.10
451.70
528.10
605.70
803.40
958.50
ACCESSORIES
Part No.
Description
Price/ea.
A 245970
A 605215
Starter bit for 1 piece core bit
Drift key
18.00
9.00
The UCAN SDS MAX CORE CUTTER is specially suited
for the latest generation of powerful rotary hammer
tools. Its’ one piece design and unique cutting head
ensure efficient drilling and superior life.
Part No.
MAX
MAX
MAX
MAX
CC134
CC218
CC212
CC318
Diameter
(in)
(mm)
1-3/4
2-1/8
2-1/2
3-1/8
44.5
54
63.5
79.4
Length
(in)
22
22
22
22
Price
/ea.
554.00
640.50
665.20
858.50
CHISELS FOR SDS-MAX HAMMERS
SDS-MAX CONNECTOR
Permits the combination of all common chuck systems
with SDS-MAX bits
Min. bit diameter - 11/4"
Part No.
Description
Price/ea.
6700
6701
6708
6709
Connector
MAX 12" extension
Spline 12" extension
MAX 30" extension
345.00
59.60
59.60
66.30
CORE BITS
For spline, SDS MAX
& kango taper shanks
Part No.
DU6
DU6
DU6
DU6
DU6
DU6
DU6
DU6
CB1916
CB2
CB212
CB258
CB318
CB312
CB4
CB5
Diameter
(in)
(mm)
1-9/16
2
2-1/2
2-5/8
3-1/8
3-1/2
4
5
40
52
66
68
80
90
100
125
Length
(in)
4
4
4
4
4
4
4
4
Price
/ea.
Part No.
Description
CHP M12
CHP M18
CHI M12
CHI M18
CHS M12S
CHS M12
CHS M16
CHG M12
CHA M15
CPS M16
CHW M15
CHC M17
12" Bull point
18" Bull point
12" X 1" Flat
18" X 1" Flat
12" X 1-1/2" Scaling chisel
12" X 3" Scaling chisel
16" X 2" Scaling chisel
12" Gouge chisel
5" X 15" Asphalt cutter
5-3/8" X 16" Round spade
1" X 15" Winged channel
4.5" X 17" Clay spade
Price/ea.
32.60
38.30
36.00
38.30
46.10
46.10
46.10
42.80
188.80
178.70
157.30
137.10
SDS-MAX FLOOR SCRAPER
With 6” blade for removing tiles and other flooring
150.00
202.30
225.90
249.50
279.80
297.80
363.00
416.90
CORE BIT SHANKS
Part No.
Description
MAX S18
A 245968
A 245969
18" (450mm) Core bit shank - SDS MAX
8" Core bit shaft - spline
15-3/4" Core bit shaft - spline
Price/ea.
100.10
77.60
132.70
ACCESSORIES
A 245967
A 604214
3
Starter bit for 2 pieces core bit
Drift key
18.00
9.00
Part No.
Description
CHI MFS
MFS BLADE
MFS KIT
MFS GAS
MFS WASH
MFS NUT
MFS BOLT
6" X 25" Complete floor scraper with standard blade
Replacement blade for floor scraper
Replacement blade, 2 gaskets, 8 washers, 4 nuts, 4 bolts
Floor scraper gasket
Floor scraper washer
Floor scraper hex nut
Floor scraper bolts
Price/ea.
567.50
104.60
128.10
23.60
4.85
4.85
12.00
www.ucanfast.com
STRAIGHT SHANK
Ti-Awl® TILE BIT
Rotary percussion bits for concrete and masonry
Ti-Awl® diamond core tile drill bits
• Fast and accurate drilling in ceramic, porcelain, marble
and granite tile
• Ideal for installing fixtures in bathroom tiles
• Minimizes cracking or spalling of tile when drilling
• Use in any rotary, non-percussion, hand drill
• Broad size range: 3/16”- 1-1/2”
• Available in single tubes or handy kit with drill guide and
carrying case
Manufactured to
B 212.15 Standard
Faster drilling + long life = lowest cost per hole
High quality carbide tip brazed to tempered steel shank
for faster drilling and longer life.
Part No.
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
JOD
183
5323
5326
11643
3163
3166
15644
15646
144
146
1412
1424
5164
5166
386
3812
3820
3824
3840
7166
15326
126
1212
1220
1224
586
5812
5824
346
3412
3424
786
7812
16
112
Diameter
(in)
(mm)
1/8
5/32
5/32
11/64
3/16
3/16
15/64
15/64
1/4
1/4
1/4
1/2
5/16
5/16
3/8
3/8
3/8
3/8
3/8
7/16
15/32
1/2
1/2
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
7/8
7/8
1
1
3
4
4
4.5
5
5
6
6
6.5
6.5
6.5
6.5
8
8
9.5
9.5
9.5
9.5
9.5
11
12
13
13
13
13
16
16
16
19
19
19
22
22
25.4
25.4
Length
(in)
Shank
Dia.
Pkg.
Qty.
3
3-1/2
6
3-1/4
3-1/2
6
4
6
4
6
12
24
4-3/4
6
6
12
20
24
40
6
6
6
12
20
24
6
12
24
6
12
24
6
12
6
12
1/8
5/32
5/32
11/64
3/16
3/16
15/64
15/64
1/4
1/4
1/4
1/4
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
5
5
5
5
5
5
5
5
2
2
Price
/ea.
5.25
5.75
7.05
5.25
5.05
6.55
6.80
8.25
5.55
7.35
20.00
34.90
7.85
10.30
8.65
25.90
32.60
37.10
80.90
13.70
15.40
14.90
32.60
46.10
51.70
27.00
39.40
66.30
34.90
50.60
79.70
46.10
58.50
70.90
88.50
DCC KIT
DCC GUIDE
Kit Includes:
• Aluminum case
• Six popular sizes of tile drills ¼”, 5/16”, 3/8”, ½”, 5/8”, ¾”
• A clear, shatterproof, non-slip guide. Essential for accurate drilling
For instructional video visit our
website at ucanfast.com
Part No.
DCC
DCC
DCC
DCC
DCC
DCC
DCC
DCC
DCC
DCC
DCC
DCC
DCC
316
14
516
38
12
58
34
1
114
138
112
GUIDE
KIT
Diameter
Price/ea.
3/16"
1/4"
5/16"
3/8"
1/2"
5/8"
3/4"
1"
1-1/4"
1-3/8"
1-1/2"
15.80
16.90
18.00
20.80
24.70
27.00
31.50
38.30
46.10
50.00
59.60
28.10
177.60
mm Sizes shown in GREEN are true metric DIN standard.
Other metric sizes shown are metric conversion sizes.
The area to be drilled must always be kept wet.
Lubricate the surface at least every 20 seconds while drilling.
See pressure water sprayer below.
UCAN GLASS BIT
PRESSURE WATER SPRAYER
Adjustable from mist to jet
• Convenient "Contractor-Paks"
Part No.
Size
Pkg
Qty.
GTB
GTB
GTB
GTB
GTB
GTB
1/8
3/16
1/4
5/16
3/8
1/2
10
10
10
10
10
5
18
316
14
516
38
12
Price
/ea.
6.05
6.95
7.60
9.05
12.80
16.90
Ideal for use with Ti-Awl® diamond core tile drill bits.
Emits a continuous stream of spray without effort.
Part No.
Size
PWS
1 Liter pressure water sprayer
Price/ea.
12.40
4
FLO-ROK DISPENSING TOOLS
SHIP AUGER BITS
UCAN WOOD
MOLE®
HEAVY DUTY CORDLESS DISPENSING TOOL
• Self-feeding point allows for fast and accurate drilling
• Reinforced single cutter and side lip provide for practically
effortless, clean drilling in most hard and soft wood even
when nails are encountered
• Unique, hollow center, corkscrew flute design clears debris
from the hole quickly and efficiently
• Wide lands ensure that the bit remains straight while drilling
• Shank, hardened along its full length, resists bending
• Available in lengths of 6” & 18” and diameters ranging
from 11/16” to 1-1/2”
SURE SHOT TOOL
• Eliminates waste
Dispenses exact amount each time
• Powerful worm drive
• Long battery life
(Up to 25 cartridges per charge)
Part No.
Description
Price /ea.
PA 5000K
Battery tool kit for FR5-28 MAX
includes two batteries, charger and case
Battery tool kit for FR6-20 SD
includes two batteries, charger and case
Battery for PA 5000 or PA 2050
Charger base for PA BAT
Cord set for PA CHARGER
1187.70
PA 2050K
Part No.
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
686
346
13166
786
15166
16
11166
1186
1146
1386
1126
3818
71618
1218
91618
5818
6818
3418
131618
7818
151618
118
111618
11818
11418
13818
11218
Diameter
(in)
Length
(in)
Pkg.
Qty.
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-1/4
1-3/8
1-1/2
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-1/4
1-3/8
1-1/2
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
18"
18"
18"
18"
18"
18"
18"
18"
18"
18"
18"
18"
18"
18"
18"
18"
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Price
/ea.
24.40
25.45
28.60
30.75
31.80
32.85
36.05
38.15
44.50
50.90
61.50
26.50
27.55
28.60
30.75
33.90
36.05
38.15
40.30
42.40
45.60
47.70
54.05
56.20
65.70
76.30
79.50
PA BAT
PA CHARGER
CORD SET
1187.70
156.20
178.10
21.20
HEAVY DUTY MANUAL TOOLS
PA 3600
PA 100
For 10, 12 & 28 oz. Cartridges
Part No.
Description
PA100
PA1200
PA3600
10oz. Manual dispensing tool (high ratio)
10-12oz. Manual dispensing tool
28oz. Manual dispensing tool
Price /ea.
41.60
56.20
202.30
FLO-ROK STATIC MIXING NOZZLES
PAM 5812X (Nozzle and Extension)
PAM 38
Nozzle Extension
New size in red
Part No.
Description
Price/ea.
PAM 38
PAM 5812X
PAM EXT
Mixing nozzle for 5-10 MAX
Mixing nozzle for FR5-28 MAX (O.A. length 17")
Nozzle extension (Ext. O.A. length 8")
2.15
4.15
1.15
ACCESSORIES
CUSTOM FASTENERS AND DRILL BITS
UCAN is especially well equipped to supply many types of custom
fasteners and drill bits in both small and large quantities. Working
from your specifications, we provide the exact part you need.
Customer specific packaging and labelling also available.
5
Part No.
Description
BOP 100S
FRBR1
FRBR2
12" High volume blow out pump
3/8" - 1/2" Nylon brush
1/2" - 1" Nylon brush
Price/ea.
22.50
10.20
18.00
www.ucanfast.com
ADHESIVE ANCHORING
FLO-ROK® 5 MAX CARTRIDGES
FLO-ROK® 6 SD CARTRIDGE
®
ICC-ES Listed
ESR - 3584
®
IAPMO - ES Listing for category 1 cracked & uncracked
concrete - Pending 2016
• MTO / MTQ Approved
• Year round use, long shelf life
• Broad working temperature range from -20°C to +30°C
• Excellent for both solid and hollow wall applications
• Smooth flowing, non-drip, easy to control
• User friendly – low odour, styrene free & MMA free
• Moisture insensitive, non sag formula
• Suitable for damp and water filled holes
• Meets LEED guidelines; low VOC
• High performance 1:1 pure epoxy chemical anchor
• Suitable for dynamic and vibration loading
• Seismic resistance
• Smooth flowing, non-drip, easy to control, long shelf life
• Ideal for deep hole applications & close to edge fastening
• User Friendly - low odour, extended working time
• Styrene and VOC free
For instructional video
visit our website
at ucanfast.com
Part No.
Description
FR6-20 SD
PA 2000
20 oz Cartridge
20oz. Manual dispensing tool
Case
Qty.
Case
Wt.
12
1
29
3
Price
/ea.
65.20
131.50
•Cartridge price includes 1 static mixing nozzle
28 oz
10 oz
For instructional video visit our website at ucanfast.com
Part No.
Description
FR5-10 MAX
FR5-28 MAX
10 oz Cartridge
28 oz Cartridge
ACCESSORIES
Case
Qty.
Case
Wt.
Price
/ea.
12
6
14
32
37.10
85.40
•Cartridge price includes 1 static mixing nozzle
PAM 6EXT
CRACKFAST® CRACK REPAIR KIT
Complete Kit Includes:
• Seal cartridge 300ml 2 pcs
• Resin cartridge 250ml 2 pcs
• Seal mixer nozzle 2 pcs
• Seal applicator fan 2 pcs
• Cartridge outlet plug 2 pcs
• Resin mixer nozzle
w/ extension 2 pcs
• Fit connector 1 pc
• Injection port 16 pcs
• Pair of gloves 2 pcs
• Wooden spatula 2 pcs
• Instruction DVD
PA 100 Dispensing tool extra
Part No.
Description
CFK 100
PA 100
CRACKFAST Crack repair kit complete
10oz. Manual dispensing tool (high ratio)
CRACKFAST Seal cartridge 300ml
CRACKFAST Resin cartridge 250ml
Resin mixer nozzle with extension tube
Seal mixer nozzle
Applicator fan for seal mixer nozzle
Insert port
1 Resin cartridge, 1 resin mixer and 1 outlet plug
FR6 P18 FR6 P22
Description
PAM 6
PAM 6HF
PAM 6EXT
PAM 6EXTW
FR6 P18
FR6 P22
FR6 P30
Standard nozzle for FR6-20 SD
High flow (9") nozzle for FR6-20 SD
9mm X 10m Extension tube for PAM 6
14mm X 10m Extension tube for PAM 6HF
18mm Resin stopper
22mm Resin stopper
30mm Resin stopper
FR6 P30
Price
2.20
9.55
73.10
CALL
34.90
36.00
CALL
HOLE CLEANING BRUSH
SBR HND - 12” Brush handle
SBR - Light gauge
stainless steel brush
SBR EXT - 12”
Price/ea.
257.40
41.60
CRACKFAST COMPONENTS
CFS
CFR
PAM CFR
PAM CFS
PAM FAN
CFP ORT
CFRP
PAM 6EXTW
Part No.
41.60
70.90
18.00
7.85
5.65
7.85
78.70
Part No.
Hole
dia. (in)
Used For
rod (in) rebar
SBR
SBR
SBR
SBR
SBR
SBR
SBR
SBR
SBR
SBR
SBR
SBR
1/2
9/16
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
12” Brush handle
12” Flexible extension
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
12
916
34
78
1
118
114
138
112
134
HND
EXT
10M
15M
20M
25M
30M
35M
Price
/ea.
14.70
15.80
16.30
16.90
18.00
19.10
19.70
20.30
21.40
22.50
13.80
13.80
6
ADHESIVE ANCHORING
ANCHOR ROD ASSEMBLIES
ROCKITE
For adhesive anchoring
SELF LEVELING POURABLE GROUT
• Straight cut
• complete with nut & washer
Rockite cement is a hydraulic type cement compound
that is specially formulated to give superior strength and
unsurpassed bonding qualities. When mixed with water,
Rockite pours smoothly into place. It sets within
15 minutes. Within one hour, it develops a compressive
strength of 4500 psi.
ISO GRADE 5.8 STEEL ROD - ZINC PLATED
Part No.
Size
Pkg.
Qty.
Case
Qty.
Case
Wt.
PRA
PRA
PRA
PRA
PRA
PRA
PRA
3/8 X 3
3/8 X 5
1/2 X 6-1/2
5/8 X 5
5/8 X 7-1/2
3/4 X 10
1 X 12
10
10
10
10
10
10
6
100
100
100
50
50
-
10
14
37
23
31
12
15
383
385
126
585
587
3410
112
Price
/C
131.50
137.10
225.90
357.40
415.80
831.50
1786.60
Ideal for:
• Patching
• Signs
• Railing
• Seats
• Machinery mounts
• Posts
Part No.
Size
ISO GRADE 5.8 STEEL ROD - GALVANIZED ASTM A153
CLASS C
ROC 10
ROC 50
10 lb Pail
50 lb Pail
PRA
PRA
PRA
PRA
PRECAST INSERTS
G126
G588
G3410
G3412
1/2
5/8
3/4
3/4
X
X
X
X
6-1/2
8
10
12
10
10
10
10
100
50
10
10
37
31
12
15
285.50
593.30
893.30
1059.60
B7 HIGH STRENGTH STEEL ROD
ZINC PLATED WITH 2H NUT
PRA B7125
1/2 X 5
10
100
35
200.00
100
100
50
10
6
14
37
31
12
15
523.60
940.50
1842.70
3449.50
6663.00
STAINLESS STEEL - TYPE 304
PRS4
PRS4
PRS4
PRS4
PRS4
385
126
587
3410
112
3/8 X 5
1/2 X 6-1/2
5/8 X 7-1/2
3/4 X 10
1 X 12
10
10
10
10
6
Also available: Type 316 stainless steel, special length and
metric thread rod assemblies.
S.S. STEEL SCREENS FOR FR5 MAX
For hollow wall applications
For instructional
video visit our
website: ucanfast.com
Part No.
Max. rod
dia. (inches)
SFR
SFR
SFR
SFR
SFR
SFR
SFR
SFR
SFR
SFR
SFR
SFR
SFR
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4 - 7/8
3/4 - 7/8
383
386
3810
123
126
1210
583
586
5810
5813
34512
348
3413
Price /ea.
4
1
34.90
142.70
• Ideal for use in precast units and
poured-in-place concrete structures
where fastener locations can be
precisely planned.
• Made of rustproof zamac alloy to
prevent surface staining.
• Install with bolts through holes in
steel forms or by means of reusable
Nail-on plugs on wood forms.
Part No.
Length (in)
Thread
Size
Pkg.
Qty.
Case
Qty.
Case
Wt.
PZI
PZI
PZI
PZI
PZI
PZI
PZI
PZI
PZI
PZI
11/16
1-1/2
1
1-3/8
1-1/2
2-7/8
1-11/16
2-7/8
1-11/16
2-7/8
10-24
1/4-20
3/8-16
3/8-16
1/2-13
1/2-13
5/8-11
5/8-11
3/4-10
3/4-10
100
100
100
100
50
25
25
25
25
25
4000
800
1000
700
300
150
200
100
150
100
44
41
44
45
40
44
38
35
33
33
10
15
24
25
35
36
45
46
55
56
Price
/C
77.60
101.20
130.40
148.30
249.50
559.60
415.18
678.70
452.90
809.00
OVERSIZED-TAPPED FOR GALVANIZED BOLTS (ASTM A563)
Screen
Size (inches)
1/2 X 3
1/2 X 6
1/2 X 10
5/8 X 3
5/8 X 6
5/8 X 10
3/4 X 3
3/4 X 6
3/4 X 10
3/4 X 13
7/8 X 5-1/2
1X8
1 X 13
Drill dia.
(inches)
1/2
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
3/4
7/8
1
1
Price
/ea.
7.55
7.85
8.60
8.60
9.00
9.45
9.35
10.50
12.50
13.10
14.00
15.00
15.00
Important: Anchor rods should be installed immediately after
FLO-ROK 5 MAX has been injected into the hole or screen.
They should not be disturbed until fully cured.
7
Case Qty.
PZI
PZI
PZI
PZI
35OT
45OT
46OT
55OT
1-1/2
1-11/16
2-7/8
1-11/16
1/2-13
5/8-11
5/8-11
3/4-10
50
25
25
25
300
200
100
150
40
38
35
33
274.20
440.50
714.60
500.00
CONCRETE INSERT PLUG - REUSABLE
Nail-on plastic plug for wood forms
Part No.
Thread
Size
Box
Qty.
Case
Qty.
PIP 25
PIP 35
PIP 45
3/8-16
1/2-13
5/8-11
100
100
100
1,000
1,000
1,000
Case
Wt.
7
8
9
Price
/C
36.00
49.50
130.40
www.ucanfast.com
STRUCTURAL ANCHORING
ROD COUPLINGS
UCAN TORPEDO® BOLT
Zinc Plated
CARBON STEEL GALVANIZED
Part No.
ROD
ROD
ROD
ROD
ROD
ROD
ROD
14
516
38
38L
12
58
34
Size
Length
A/F
Pkg.
Qty.
Case
Qty.
Case
Wt.
7/8
1-1/8
1-1/8
1-3/4
1-3/4
2-1/8
2-1/4
3/8
1/2
1/2
5/8
11/16
13/16
1
100
100
100
100
50
25
25
1,000
1,000
1,000
600
300
150
150
20
47
38
69
36
28
45
30.90
47.20
42.80
103.40
111.30
177.60
292.20
100
1,000
40
59.60
Price
/C
1/4 - 20
5/16 - 18
3/8 - 16
3/8 - 16
1/2 - 13
5/8 - 11
3/4 - 10
Price
/C
REDUCER COUPLINGS
ROD 3814
3/8 - 1/4 X 1
BULK CARTONS
Part No.
Size
Length
A/F
Case
Qty.
Case
Wt.
ROD
ROD
ROD
ROD
ROD
ROD
ROD
1/4 - 20
5/16 - 18
3/8 - 16
3/8 - 16
1/2 - 13
5/8 - 11
3/4 - 10
7/8
1-1/8
1-1/8
1-3/4
1-3/4
2-1/8
2-1/4
3/8
1/2
1/2
5/8
11/16
13/16
1
2,800
1,200
1,300
450
450
250
150
53
55
48
51
51
44
45
14B
516B
38B
38LB
12B
58B
34B
24.70
40.50
34.90
94.40
95.60
159.60
251.70
REDUCER COUPLINGS
ROD 3814B
3/8 - 1/4 X 1
1,400
-
51.70
UCAN TORPEDO® BOLT is an excellent anchoring
solution for medium duty and temporary applications. It
is mechanically galvanized for corrosion resistance and a
wide range of applications. Matched with a standard
UCAN ANSI tolerance drill bit, this fastener exhibits
consistently high load values. UCAN TORPEDO® BOLT
installs quickly leaving the clean appearance of a finished
hex washer head on the working surface.
• Bimetal version available in 304 and 316 stainless steel
• Use with UCAN standard ANSI compliant drill bits
• Corrosion resistant, mechanical galvanizing for a wide
range of applications
• Fast installation and reduced edge distance requirements, compared to mechanical expansion anchors
• One piece fastener with finished hex washer head
• Unique thread pattern facilitates ease of installation
• Anchor can be set with an impact or manual socket
wrench
• Underhead serrations
• Removable – ideal for temporary anchoring applica-
REBAR SAFETY CAP
Provide protection from protruding rebar
tions
• High visibility colour
• Not for impalement protection
• Anchor size is stamped on head for easy identification
and enhanced quality control after Installation
ICC ES Listing is pending
RSC 1025C
10M - 25M Rebar
RSC 2540
25M - 40M Rebar
Part No.
Pkg. Qty.
Case Qty.
Case Wt.
RSC1025C
RSC 2540
100 / Bag
100 / Bag
500
500
9
9
/C
112.40
190.80
Part No.
Size
UTB
UTB
UTB
UTB
UTB
UTB
UTB
UTB
UTB
UTB
UTB
UTB
UTB
UTB
UTB
UTB
UTB
UTB
UTB
1/4
1/4
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
14214
143
38134
38212
383
384
385
12212
123
124
125
583
584
585
586
344
345
346
347
X 2-1/4
X3
x 1-3/4
x 2-1/2
x3
x4
x5
x 2-1/2
x3
x4
x5
x3
x4
x5
x6
x4
x5
x6
x7
Pkg.
Qty.
Case
Qty.
Case
Wt.
100
100
50
50
50
50
25
50
50
40
30
25
25
20
20
15
15
15
15
800
800
400
400
400
400
200
150
150
120
90
75
75
60
60
45
45
45
45
38
46
37
47
54
66
41
32
37
36
33
30
31
36
41
33
39
45
51
Price
/C
47.00
55.00
89.00
114.00
138.00
166.00
190.00
205.00
232.00
318.00
370.00
394.00
455.00
540.00
778.00
698.00
812.00
950.00
1035.00
8
STRUCTURAL ANCHORING
WEDGE ANCHORS
HOOK WEDGE
CARBON STEEL ZINC PLATED
Zinc Plated
®
IAPMO ES Listed ER-0373
Tested in accordance with AC 193
• Letter Coded Studs
(from ⌀3/8 to 3/4)
• Long Thread Design
Part No.
Size
Pkg.
Qty.
WED 14134
WED 14214
WED 14314
WED 38214
WED 38234
WED 383
WED 38334
WED 385
WED 12234
WED 12334
WED 12412
WED 12512
WED 127
WED 12812
WED 1210
WED 58312
WED 58412
WED 585
WED 586
WED 587
WED 58812
WED 5810
WED 34414
WED 34434
WED 34512
WED 34614
WED 347
WED 34812
WED 3410
WED 3412
WED 786
WED 788
WED 7810
WED 16
WED 19
WED 112
WED 1149
WED 11412
1/4 X 1-3/4
1/4 X 2-1/4
1/4 X 3-1/4
3/8 X 2-1/4
3/8 X 2-3/4
3/8 X 3
3/8 X 3-3/4
3/8 X 5
1/2 X 2-3/4
1/2 X 3-3/4
1/2 X 4-1/2
1/2 X 5-1/2
1/2 X 7
1/2 X 8-1/2
1/2 X 10
5/8 X 3-1/2
5/8 X 4-1/2
5/8 X 5
5/8 X 6
5/8 X 7
5/8 X 8-1/2
5/8 X 10
3/4 X 4-1/4
3/4 X 4-3/4
3/4 X 5-1/2
3/4 X 6-1/4
3/4 X 7
3/4 X 8-1/2
3/4 X 10
3/4 X 12
7/8 X 6
7/8 X 8
7/8 X 10
1X6
1X9
1 X 12
1-1/4 X 9
1-1/4 X 12
100
100
100
50
50
50
50
100
50
50
50
50
25
25
25
25
25
25
25
20
20
15
20
20
20
15
15
10
10
10
10
10
5
10
5
5
4
4
Price
/C
Case
Qty.
Case
Wt.
800
800
800
400
400
400
400
300
150
150
150
150
75
75
75
75
75
75
75
60
60
45
60
60
60
45
45
30
30
30
30
30
15
30
15
15
12
12
27
31
38
35
40
42
49
45
29
35
38
47
31
36
43
31
36
40
44
52
61
47
52
55
50
54
45
53
42
49
38
48
39
46
34
59
56
49
61.30
66.90
80.90
97.80
105.70
112.40
120.20
147.20
163.00
191.10
196.70
256.20
286.60
422.50
512.40
320.60
353.80
377.80
422.50
502.60
606.80
755.60
515.20
546.10
589.60
641.10
704.10
904.40
1017.80
1328.00
1084.30
1258.50
1512.40
1524.70
1898.90
2202.30
3337.10
3775.30
400
400
150
150
150
75
75
60
60
45
38
51
35
42
50
37
45
52
50
46
134.90
159.60
243.80
261.90
297.80
470.80
548.40
655.10
761.90
887.70
CARBON STEEL GALVANIZED
3/8
3/8
1/2
1/2
1/2
5/8
5/8
3/4
3/4
3/4
WAG 38234
WAG 38334
WAG 12334
WAG 12414
WAG 12512
WAG 58412
WAG 586
WAG 34414
WAG 34512
WAG 347
X
X
X
X
X
X
X
X
X
X
2-3/4
3-3/4
3-3/4
4-1/4
5-1/2
4-1/2
6
4-1/4
5-1/2
7
50
50
50
50
50
25
25
20
20
15
NOTE: For wedge anchor length identification chart refer to page 30
TIE WIRE ANCHORS
We invented it.
Accept no substitute!
Part No.
Size
Eye
Dia.
Pkg.
Qty.
Case
Qty.
Case
Wt.
EP 932
EP932M
1/4 X 2-1/4
1/4 X 2-1/4
9/32
9/32
100
-
1,000
1,000
38
35
9
Price
/C
58.00
54.50
The UCAN Hook Wedge Anchor is a high grade steel
fastener, designed primarily for wire mesh installation.
The anchor consists of a steel body with 1" hooked end
and a one piece three segment wrap around expansion
clip.
• Wrap around expansion clip provides true 360° expansion
• Non-bottom bearing type
• Fast, simple installation by hammer
• Anchor has follow-up expansion feature
• Rigid, one piece fastening
Part No.
Size
HW38414B
3/8 X 4-1/4
Case
Qty.
Case
Wt.
250
31
Price
/C
167.50
WEDGE ANCHORS
STAINLESS STEEL TYPE 304
Price
/C
Part No.
Size
Pkg.
Qty.
Case
Qty.
Case
Wt.
ISS 14134
ISS 14214
ISS 14314
ISS 38214
ISS 38234
ISS 383
ISS 38334
ISS 385
ISS 12234
ISS 12334
ISS 12412
ISS 12512
ISS 127
ISS 58312
ISS 58412
ISS 586
ISS 34414
ISS 34512
ISS 347
ISS 3410
ISS 16
ISS 19
1/4 X 1-3/4
1/4 X 2-1/4
1/4 X 3-1/4
3/8 X 2-1/4
3/8 X 2-3/4
3/8 X 3
3/8 X 3-3/4
3/8 X 5
1/2 X 2-3/4
1/2 X 3-3/4
1/2 X 4-1/2
1/2 X 5-1/2
1/2 X 7
5/8 X 3-1/2
5/8 X 4-1/2
5/8 X 6
3/4 X 4-1/4
3/4 X 5-1/2
3/4 X 7
3/4 X 10
1X6
1X9
100
100
100
50
50
50
50
100
50
50
50
50
25
25
25
25
20
20
15
10
10
5
800
800
800
400
400
400
400
300
150
150
150
150
75
75
75
75
60
60
45
30
30
15
27
31
38
35
40
42
49
45
29
35
39
47
31
31
36
44
52
50
45
42
47
46
165.20
184.30
220.30
361.80
404.50
422.50
484.30
601.20
760.70
906.80
987.70
1188.80
1434.90
1536.00
1761.90
2125.90
2369.70
2797.80
3346.10
4400.10
6134.90
8202.30
800
800
800
400
400
400
300
150
150
75
75
60
75
45
27
31
38
35
40
49
45
29
35
36
44
52
52
45
245.00
257.40
331.50
576.50
624.80
747.20
919.20
1185.40
1470.80
2822.50
3427.00
3930.40
3300.00
5505.70
STAINLESS STEEL TYPE 316
IST
IST
IST
IST
IST
IST
IST
IST
IST
IST
IST
IST
IST
IST
14134
14214
14314
38214
38234
38334
385
12234
12334
58412
586
587
34414
347
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
5/8
5/8
5/8
3/4
3/4
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1-3/4
2-1/4
3-1/4
2-1/4
2-3/4
3-3/4
5
2-3/4
3-3/4
4-1/2
6
7
4-1/4
7
100
100
100
50
50
50
100
50
50
25
25
20
25
15
MINIMUM EMBEDMENT FOR WEDGE ANCHORS
Size (inch)
Emb (inch)
1/4
1-1/8
3/8
1-5/8
1/2
2-1/4
5/8
2-3/4
3/4
3-1/4
7/8
4
1
4-1/2
1-1/4
5-1/2
www.ucanfast.com
STRUCTURAL ANCHORING
DROP-IN ANCHOR SYSTEM
SZ HEAVY-LOAD ANCHORS
Zinc Plated
®
ICC ES Listed ESR-3304
ACI 318 category 1 anchor for cracked or uncracked concrete
METRIC O/D
HEX BOLT TYPE
Part No.
Thread
Size
Drill
Size
Pkg.
Qty.
Case
Qty.
Case
Wt
Price
/C
1/4
3/8
8MM
12MM
100
50
2,000
1,000
29
53
47.50
55.00
3/8
1/2
5/8
7/8
1
100
50
50
25
25
2,000
1,000
500
100
100
45
61
58
32
49
50.00
59.00
117.00
284.00
530.00
2,000
1000
500
100
100
42
61
56
32
49
231.00
363.00
679.00
1655.00
3850.00
IPA 14516
IPA 381532
FRACTIONAL O/D
IPA
IPA
IPA
IPA
IPA
ISO GRADE 8.8 ZINC PLATED
Part No.
LHL
LHL
LHL
LHL
LHL
LHL
LHL
LHL
LHL
LHL
LHL
LHL
630
650
830
850
1025
1045
1220
1240
1620
1650
2030
2060
Bolt
dia.
(mm)
Length
(mm)
Min.
Emb.
(mm)
Drill
Size
(mm)
Fastens
up to
(mm)
Pkg.
Qty.
Price
/C
6
6
8
8
10
10
12
12
16
16
20
20
95
115
105
125
116
136
127
147
150
180
192
222
50
50
60
60
65
65
80
80
100
100
125
125
10
10
12
12
15
15
18
18
24
24
28
28
30
50
30
50
25
50
20
40
20
50
30
60
50
50
50
25
25
25
20
20
10
10
10
5
623.60
719.10
741.60
854.00
955.10
1028.10
1269.70
1449.50
2528.10
2786.60
4438.30
5168.60
STAINLESS STEEL A4 (TYPE 316) WITH TITANIUM
• LHS 830
• LHS 1025
• LHS 1045
• LHS 1220
• LHS 1240
• LHS 1620
• LHS 2030
8
10
10
12
12
16
20
105
116
136
128
148
150
182
60
71
71
80
80
100
125
12
15
15
18
18
24
28
30
25
45
20
40
25
30
50
25
25
20
20
10
10
1/4
3/8
1/2
5/8
3/4
1438
3812
1258
5878
341
STAINLESS STEEL (TYPE 304)
IPS
IPS
IPS
IPS
IPS
100
50
50
25
25
COIL THREADED DROP-IN ANCHORS
Zinc Plated and Knurled
Drill
Size
Thread
Size
Part No.
4438.30
6516.90
6966.40
7472.00
8539.40
13370.90
21910.20
3/8
1/2
5/8
7/8
1
1/4
3/8
1/2
5/8
3/4
1438
3812K
1258
5878
341
5/8
1
1/2
3/4
CTD 1258
CTD 341
Case
Qty.
Pkg.
Qty.
500
100
50
25
Case
Wt
59
49
Price
/C
147.00
547.00
DROP-IN SETTING TOOL
Auto setting tool for use
with SDS hammer drill
Manual setting tool
STUD TYPE
Depth control SDS PLUS bits
For best results use UCAN depth
control bits and setting tools only.
ISO GRADE 8.8 ZINC PLATED
Part No.
• BHL 830
• BHL 1025
BHL 1220
• BHL 1240
BHL 1620
• BHL 1650
• BHL 2030
• BHL 2060
Bolt
dia.
(mm)
Length
(mm)
Min.
Emb.
(mm)
Drill
Size
(mm)
Fastens
up to
(mm)
Pkg.
Qty.
Price
/C
8
10
12
12
16
16
20
20
110
121
132
152
157
187
201
231
50
60
80
80
100
100
125
125
12
15
18
18
24
24
28
28
30
25
20
40
20
50
30
60
50
25
20
20
10
10
10
5
741.60
955.10
1269.70
1404.50
2528.10
2786.60
4438.30
5168.60
STAINLESS STEEL A4 (TYPE 316) WITH TITANIUM
• BHS 830
• BHS 1045
• BHS 1220
• BHS 1240
• BHS 1620
• BHS 2030
8
10
12
12
16
20
109
140
131
151
157
188
60
71
80
80
100
125
12
15
18
18
24
28
30
45
20
40
20
30
50
25
20
20
10
10
4438.30
6966.40
7472.00
8539.40
13370.90
21910.20
• Special order item / limited stock - allow 2-6 weeks for
delivery. Also available special sizes & head styles.
Prices & delivery on request. Extra delivery charges may apply.
Part No.
Anchor Size
IPAST 14
IPAST 38
IPAST 12
IPAST 58
IPAST 34
SDS ST38
SDS ST12
SDS 3812DC
SDS 1258DC
1/4
3/8
1/2
5/8
3/4
3/8
1/2
1/2
5/8
Price/ea.
SDS Auto setting tool
SDS Auto setting tool
X 1-11/16 SDS PLUS depth control bit for IPA 3812
X 2-1/16 SDS PLUS depth control bit for IPA 1258
3.60
5.85
8.35
11.60
15.40
29.80
29.80
33.50
39.40
STUBi DROP-IN ANCHOR
Zinc Plated
3/8" Short Drop-in anchor
for hollow core slabs and
other shallow embedment
requirements
Part No.
Thread
Size
Drill Size
Box.
Qty.
Case
Qty.
Price
/C
DIS 3812
3/8
1/2
100
1000
59.60
SETTING TOOL FOR STUBi
Part No.
Anchor size
DISST 38
3/8
Price/ea.
8.35
10
MASONRY ANCHORING
SLEEVE ANCHORS
HEX BOLT TYPE SLEEVE ANCHORS
ACORN NUT
Zinc Plated
Zinc Plated
Part No.
Size
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
SLE 14138
SLE 14214
1/4 X 1-3/8
1/4 X 2-1/4
100
100
1,000
1,000
25
35
45.00
52.30
HEX NUT
Zinc Plated
Part No.
Size
Pkg.
Qty.
Case
Qty.
Case
Wt.
SLE
SLE
SLE
SLE
SLE
SLE
SLE
SLE
SLE
SLE
SLE
SLE
SLE
SLE
5/16 X 1-1/2
5/16 X 2-1/2
3/8 X 1-7/8
3/8 X 3
1/2 X 2-1/4
1/2 X 3
1/2 X 4
1/2 X 6
5/8 X 2-1/4
5/8 X 4-1/4
5/8 X 6
3/4 X 2-1/2
3/4 X 4-1/4
3/4 X 6-1/4
100
100
50
50
25
25
25
25
25
10
10
10
10
10
1,000
600
500
300
250
150
150
100
150
60
40
60
60
40
40
36
36
32
34
26
30
30
38
26
23
27
39
33
516112
516212
38178
383
12214
123
124
126
58214
58414
586
34212
34414
34614
Price
/C
51.70
65.20
66.90
92.70
122.50
154.50
176.10
267.10
216.90
332.40
382.50
393.30
502.30
588.80
With ISO Grade 6.8 Bolt
Part No.
Size
SLB
SLB
SLB
SLB
SLB
SLB
3/8
3/8
3/8
1/2
1/2
1/2
38178
38214
383
12214
12234
124
Zinc Plated
1-7/8
2-1/4
3
2-1/4
2-3/4
4
Pkg.
Qty.
Case
Qty.
Case
Wt.
3/8
3/8
3/8
1/2
1/2
1/2
50
50
50
25
25
25
500
500
300
250
250
150
40
45
34
37
41
33
Price
/C
92.20
103.40
134.90
159.60
174.20
220.30
LAG SHIELDS
Rust Proof Zamac Alloy
SHORT
Part No.
Size
Drill
Size
Pkg.
Qty.
Case
Qty.
Case
Wt.
LAS
LAS
LAS
LAS
1/4 X 1
5/16 X 1-1/4
3/8 X 1-3/4
1/2 X 2
1/2
1/2
5/8
3/4
50
50
50
25
500
500
500
250
12
13
26
21
54.00
62.00
96.00
146.00
1/4 X 1-1/2
5/16 X 1-3/4
3/8 X 2-1/2
1/2 X 3
1/2
1/2
5/8
3/4
50
50
50
25
500
500
300
150
17
16
24
19
64.00
72.00
138.00
221.00
14
516
38
12
Price
/C
LONG
LAL
LAL
LAL
LAL
FLAT HEAD - PHILLIPS
X
X
X
X
X
X
Drill
Size
14
516
38
12
SINGLE-EXPANSION SHIELDS
Part No.
Size
Pkg.
Qty.
Case
Qty.
Case
Wt.
SLF
SLF
SLF
SLF
SLF
SLF
SLF
SLF
SLF
SLF
SLF
1/4 X 1-3/8
1/4 X 2
1/4 X 3
1/4 X 4
1/4 X 5-1/4
5/16 X 2-1/2
5/16 X 3-1/2
3/8 X 2-3/4
3/8 X 4
3/8 X 5
3/8 X 6
100
100
100
100
100
100
100
50
50
50
50
1,000
1,000
1,000
1,000
600
600
600
500
300
300
300
19
26
36
45
35
28
38
41
33
41
49
14138
142
143
144
14514
516212
516312
38234
384
385
386
Price
/C
60.70
69.20
77.60
91.60
115.80
82.10
97.80
116.90
129.30
165.20
191.10
HEX NUT STAINLESS STEEL TYPE 304
Rust Proof Zamac Alloy
Part No.
Size
Drill
Size
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
USA
USA
USA
USA
USA
USA
1/4 X 1-5/16 1/2
5/16 X 1-1/2 5/8
3/8 X 1-1/2 5/8
1/2 X 2
7/8
5/8 X 2-5/8
1
3/4 X 2-3/4 1-1/4
50
50
50
25
25
10
500
500
500
150
150
60
13
25
23
18
28
19
68.00
110.70
213.50
243.80
400.00
600.10
14
516
38
12
58
34
DOUBLE-EXPANSION SHIELDS
Rust Proof Zamac Alloy
Part No.
Size
Pkg.
Qty.
Case
Qty.
Case
Wt.
SLS
SLS
SLS
SLS
SLS
SLS
SLS
SLS
1/4 X 1-3/8
5/16 X 1-1/2
5/16 X 2-1/2
3/8 X 1-7/8
3/8 X 3
1/2 X 3
1/2 X 4
1/2 X 6
100
100
100
50
50
25
25
25
1,000
1,000
600
500
300
150
150
100
23
39
34
33
32
27
30
30
14138
516112
516212
38178
383
123
124
126
11
Price
/C
128.10
189.90
257.40
287.70
393.30
606.80
707.90
1095.60
Part No.
Size
Drill
Size
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
UDA
UDA
UDA
UDA
UDA
UDA
1/4 X 1-3/8 1/2
5/16 X 1-5/8 5/8
3/8 X 2
3/4
1/2 X 2-1/2 7/8
5/8 X 2-3/4
1
3/4 X 4
1-1/4
100
50
50
25
25
10
1,000
500
300
150
150
60
29
28
28
22
31
27
71.40
121.40
238.20
305.60
424.80
964.10
14
516
38
12
58
34
www.ucanfast.com
MASONRY ANCHORING
NYLON DRIVE SCREW ANCHORS
ZAMAC PIN BOLTS
WITH ZINC PLATED STEEL NAIL
Part No.
Size
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
ZAM
ZAM
ZAM
ZAM
ZAM
ZAM
3/16 X 7/8
1/4 X 1
1/4 X 1-1/4
1/4 X 1-1/2
1/4 X 2
1/4 X 3
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
600
15
19
23
26
32
28
32.10
41.60
45.00
51.70
61.80
88.80
31678 *
141 *
14114 *
14112
142
143
•
•
•
•
Install with a hammer - remove with a screwdriver
Nylon 6 body resists high and low temperatures
Collapsible body ensures positive clamping
Lock-in feature avoids pre-expansion
ROUND HEAD - PHILLIPS DRIVE SCREW
* Available in Super Pak Jar (See Page 27)
WITH STAINLESS STEEL NAIL
ZAM
ZAM
ZAM
ZAM
141SS
14114SS
14112SS
142SS
1/4
1/4
1/4
1/4
X1
X 1-1/4
X 1-1/2
X2
100
100
100
100
1,000
1,000
1,000
1,000
19
23
26
32
65.90
71.00
82.40
99.60
BULK PACK WITH ZINC PLATED STEEL NAIL
Part No.
Size
Case
Qty.
Case
Wt.
ZAM
ZAM
ZAM
ZAM
ZAM
ZAM
ZAM
3/16 X 7/8
1/4 X 3/4
1/4 X 1
1/4 X 1-1/4
1/4 X 1-1/2
1/4 X 2
1/4 X 3
5,000
2,500
2,500
2,000
1,800
1,250
700
46
45
48
45
46
40
31
31678B
1434B
141B
14114B
14112B
142B
143B
Price
/M
285.50
280.00
392.20
429.20
500.00
583.20
846.10
Part No.
MNA
MNA
MNA
MNA
MNA
Drill
dia.
(mm)
Length
(mm)
Fastens
up to
(mm)
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
5
5
6
6
6
30
50
35
50
70
5
25
10
25
45
100
100
100
100
100
2,400
2,400
2,400
1,800
1,200
18
24
26
20
22
23.60
30.90
30.40
34.90
47.20
530
550
635
650
670
COUNTERSINK HEAD - PHILLIPS DRIVE SCREW
NYLON PIN BOLTS
MNA
MNA
MNA
MNA
850
860
880
8100
8
8
8
8
50
60
80
100
15
25
45
60
100
100
100
100
900
900
600
600
18
21
18
21
WITH ZINC PLATED STEEL NAIL
ROUND HEAD - SQUARE SOCKET DRIVE SCREW
54.00
55.10
59.60
66.30
Mushroom head
Round head
MNA 635R
Part No.
Size
NYL
NYL
NYL
NYL
NYL
NYL
NYL
NYL
3/16 X 1
3/16 X 1
3/16 X 1-1/2
1/4 X 3/4
1/4 X 1
1/4 X 1-1/2
1/4 X 2
1/4 X 3
3161
3161R
316112R
1434
141
14112
142
143
Head
Style
M
Round hd
Round hd
M
M
M
M
M
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
100
100
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
1,000
1,000
600
5
5
7
5
6
9
11
12
20.30
20.30
27.00
20.30
21.40
27.00
41.60
55.10
1000
1000
1000
-
3
4
5
49.00
57.00
62.00
6
40
15
100
2400
26
30.40
ROUND / COUNTERSINK HEAD
304 STAINLESS STEEL PHILLIPS DRIVE SCREW
Round head (5 & 6mm dia. )
Countersink head (8mm dia. )
Also available in bulk cartons
WITH NYLON NAIL
NNY 1434M
NNY 141M
NNY 14112M
1/4 X 3/4
1/4 X 1
1/4 X 1-1/2
M
M
M
MNA
MNA
MNA
MNA
MNA
530SS
635SS
650SS
880SS
8100SS
5
6
6
8
8
30
35
50
80
100
5
10
25
45
60
100
100
100
100
100
2,400
2,400
1,800
600
600
18
26
20
18
21
50.00
59.60
80.90
196.70
213.50
Note: Always drill holes 6mm deeper than embedment
ZINC ALLOY SCREW ANCHORS
TWO HOLE ANGLE CLIP
Zinc Plated
Part No.
Size
Drill
Size
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
LED
LED
LED
LED
LED
LED
7-8 X 3/4
7-8 X 1
7-8 X 1-1/2
10-12 X 1
10-12 X 1-1/2
14-16 X 1-1/2
1/4
1/4
1/4
5/16
5/16
3/8
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
1,000
11
12
20
20
28
40
24.00
28.00
37.50
39.50
52.50
65.00
634
61
6112
101
10112
16112
For use with fasteners such as
Pin Bolts & SCRU-IT Anchors
Part No.
Pkg.
Qty.
Case
Qty.
Price
/C
AC 341
100
1,000
56.20
12
MASONRY ANCHORING
MUN NYLON PLUGS
UCAN ALEX
Heavy duty push through type
• Extra-Grip Aluminum Plugs
• Suitable for electrical fixtures
• High temperature resistance
• Made of Nylon 6 for superior performance
• Knock-in collar prevents premature expansion
during installation
• Positive guidance keeps screw centered
Part No.
Size
Screw
dia.
Drill
(mm)
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
MUN
MUN
MUN
MUN
MUN
MUN
5 X 25
6 X 30
8 X 40
10 X 50
12 X 60
14 X 75
4-6
6-8
10-12
14-18
3/8
M10
5
6
8
10
12
14
100
100
100
50
25
-
3,600
3,600
3,600
1,800
900
1,000
8
10
15
13
9
18
6.20
7.75
14.00
27.80
48.90
74.20
5
6
8
10
12
14B
Part No.
Size
Screw
Size
Drill
Size
Pkg.
Qty.
Case
Qty.
Case
Wt.
ALE 141
ALE 14114
ALE 14112
1/4 X 1
1/4 X 1-1/4
1/4 X 1-1/2
6-10
6-10
6-10
1/4
1/4
1/4
100
100
100
1,000
1,000
1,000
3
3
4
Price
/C
23.60
27.00
30.40
BLUE PLASTIC PLUGS
• Economical plug for light loads in solid substrates
MBS RENOVATION ANCHOR
These long length heavy duty nylon anchors are supplied
complete with screws. They can be used as wall tie
anchors, spacing anchors, frame anchors, and for many
other applications.
Part No.
Length
MBS
MBS
MBS
MBS
4
4-3/4
5-1/2
6-1/4
1010
1012
1014
1016
Drill
(mm)
Pkg.
Qty.
Price
/C
10
10
10
10
50
50
50
50
269.70
297.80
331.50
415.80
Also available with stainless steel screws and lengths up to 300mm
INSULATION FASTENERS
1-1/2" HEAD DIAMETER - EXTENDED GRIP RANGE
Part No.
Size
Drill
Size
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
UBP
UBP
UBP
UBP
6-8 X 3/ 4
8-10 X 7/8
10-12 X 1
14-16 X 1-3/8
3/16
3/16
1/4
5/16
100
100
100
100
7,200
7,200
4,000
1,200
5
5
6
3
4.55
5.05
6.20
10.20
68 *
810 *
1012 *
1416
Also available in bulk cartons & * Super Pak (See Page 27)
YELLOW PLASTIC PLUGS
• Primarily for solid substrates
• Suitable for light loads in hollow walls
Part No.
Size
Drill
Size
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
UYP 48 *
UYP 812 *
UYP 1216
4-6-8 X 7/8
3/16
8-10-12 X 1-1/4
1/4
12-14-16 X 1-1/2 5/16
100
100
100
7,200
4,000
1,200
7
7
3
5.35
6.85
10.50
Also available in bulk cartons & * Super Pak (See Page 27)
PVC WALL PLUGS
• All Plastic
• Plastic body eliminates thermal transfer
• Not for structural support
Part No.
Drill
Size
Overall
Length
Grip
Range
MJX 314
MJX 412
5/16
5/16
3-1/4
4-1/2
TUG
Pkg.
Qty.
Pkg.
Wt.
Price
/C
1-2
2 - 3-1/4
400
250
5
4
59.60
71.00
1 - 1-1/2
3-1/2 - 4
4-1/2 - 5
250
250
250
3
5
5
51.70
73.10
94.40
1-1/2" HEAD DIAMETER
MJP 234
MJP 512
MJP 614
5/16
5/16
5/16
2-3/4
5-1/2
6-1/4
2-3/8" HEAD DIAMETER
TUR
• Can be cut to length for shorter embedment
Part No.
Screw
Size
Drill
Size
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
TUR 61
TUG 101
6-8
8-10
7/32
1/4
100
100
1,000
1,000
2
2
8.45
10.20
METAL FRAME ANCHOR
• Galvanized and fire resistant
• Allows easy spacing of frame
MJL 234
MJL 334
MJL 412
13
5/16
5/16
5/16
2-3/4
3-3/4
4-1/2
1-1-1/2
2-2-1/2
2-1/2-3
250
250
250
3
4
5
55.10
57.30
71.00
Part No.
Size (mm)
Drill Size
Pkg.
Qty.
Pkg.
Wt.
MMR 110
MMR 130
10 X 110
10 X 130
10mm
10mm
100
100
12
10
Price
/C
211.30
224.80
www.ucanfast.com
HOLLOW WALL ANCHORING
UCAN TWISTER® ANCHORS
TOGGLE BOLTS
•
•
•
•
Heavy gauge wing and nut
Install with a screwdriver (hand or cordless)
No predrilling is required
Fixtures can be installed with #8 screws of any length
Improved design allows for greater expansion and better
holding capability
• Available in Contractor "Bulk" Packs
(Socket/slot combination) screws
ZAMAC DRYWALL ANCHOR
Part No.
Description
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
JET 100 *
JET 100B
Twister zamac anchor
Twister zamac anchor
100
-
1,000
2,500
15
36
36.00
29.80
NYLON DRYWALL ANCHOR
Part No.
Description
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
JET NYL *
JET NYLB
Twister nylon anchor
Twister nylon anchor
100
-
1,000
2,000
4
8
25.90
19.20
Part No.
Size
TOG
TOG
TOG
TOG
TOG
TOG
TOG
TOG
TOG
TOG
TOG
TOG
TOG
TOG
TOG
1/8 X 2
1/8 X 3
1/8 X 4
3/16 X 2
3/16 X 3
3/16 X 4
3/16 X 5
3/16 X 6
1/4 X 3
1/4 X 4
1/4 X 5
1/4 X 6
3/8 X 4
3/8 X 5
3/8 X 6
182
183
184
3162
3163
3164
3165
3166
143
144
145
146
384
385
386
Drill
Dia.
Pkg.
Qty.
Case
Qty.
Case
Wt.
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
500
500
500
500
500
500
300
300
300
300
300
300
150
100
100
8
9
12
16
18
21
16
18
21
24
27
29
28
21
24
29.80
33.80
41.10
40.50
45.00
47.80
56.20
58.50
65.20
71.40
83.20
92.20
173.10
191.10
204.50
100
100
100
100
1,000
1,000
1,000
400
8
15
27
21
21.90
28.70
40.50
96.70
3/8
3/8
3/8
9/16
9/16
9/16
9/16
9/16
3/4
3/4
3/4
3/4
1
1
1
Price
/C
TOGGLE HEADS ONLY
Heavy gauge wing & nut
* Available in Super Pak Jar (See Page 27)
TOG
TOG
TOG
TOG
TIP TOGGLE™
H18
H316
H14
H38
1/8
3/16
1/4
3/8
3/8
9/16
5/8
1
METAL HOLLOW WALL ANCHORS
With combination head screws
• Multi use
• Hollow Cavity Anchor
• Can be used with 3/8 X 3’ or 10’ rods
for extended reach into cavities.
Part No.
Size
UTT 384
3/8-16 X 4
Drill
Size
7/8"
Best choice for hollow wall
Box
Qty.
Case
Qty.
25
100
Price
/C
298.00
NYLON TOGGLE ANCHOR
Use with #8 or #10 screws
Part No.
Screw
Size
Drill
Dia.
Grip
Range
Pkg.
Qty.
Case
Qty.
Case
Wt.
MWA
MWA
MWA
MWA
MWA
MWA
MWA
MWA
1/8 X 3/4
1/8 X 1-3/4
1/8 X 2-1/8
1/8 X 1-3/4
3/16 X 2
3/16 X 2-1/2
1/4 X 2
1/4 X 2-1/2
5/16
5/16
5/16
5/16
7/16
7/16
1/2
1/2
0-1/2
1/8-1/2
1/8-5/8
5/8-7/8
1/8-5/8
5/8-1-1/4
1/8-5/8
5/8-1-1/4
100
100
100
100
50
50
50
50
1,000
1,000
1,000
1,000
500
500
500
500
10
14
14
19
18
24
24
30
37.10
37.10
47.80
38.30
66.30
78.70
93.30
98.90
Price
/C
18XS
18S
18SL
18L
316S
316L
14S
14L
Price
/C
DRIVE-TYPE ANCHORS
• Does not require
predrilling in drywall
Part No.
Size
Drill
Dia.
Grip
Range
Pkg.
Qty.
NTA 38
NTA 12
NTA 58
3/8
1/2
5/8
3/8
3/8
3/8
5/16-7/16
7/16-9/16
9/16-11/16
100
100
100
Case
Qty.
1000
1000
1000
Price
/C
22.50
23.60
24.70
Part No.
Size
Grip
Range
Pkg.
Qty.
Case
Qty.
Case
Wt.
MWD 18S
MWD 18SL
MWD 18L
1/8 X 1-1/4
1/8 X 1-3/4
1/8 X 1-3/4
1/8-1/2
1/8-3/4
5/8-7/8
100
100
100
1,000
1,000
1,000
15
15
19
KAP TOGGLE
MWA INSTALLATION TOOL
Snap-off toggle anchor
Reduces Installation time by at least 50%
Part No.
Screw
Size
KAP 316
KAP 14
3/16
1/4
Drill
Size
Box
Qty.
Case
Qty.
1/2
1/2
100
100
600
600
45.00
48.90
46.70
Price
/C
161.00
179.60
Part No.
Description
MWAT 1
MWA Installation tool
Price/ea.
28.10
14
MASONRY ANCHORING
SUPER SCRU-IT® MASONRY ANCHOR SYSTEM
• Exclusive scalloped threads cut deeper grooves in concrete
• Available with either straight shank or SDS drill systems
• Much higher holding power than other thread designs
• RUSPRO coated for maximum corrosion resistance in
exposed environments
®
• Completely stress free - may be installed close to edges
• SCRU-IT box with
flip-out side for easy access.
• Works where others fail in difficult substrates
(e.g. horizontal mortar joints)
SUPER SCRU-IT® ANCHORS
One drill bit included with each package of 100 anchors
SUPER SCRU-IT® SILVER
One drill bit included with each package of 100 anchors
HEX WASHER-HEAD
PHILLIPS FLAT-HEAD
Part No.
Size
Part No.
Case
Qty.
Wt.
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
3/16 X 3/4
3/16 X 1-1/4
3/16 X 1-3/4
3/16 X 2-1/4
3/16 X 2-3/4
3/16 X 3-1/4
3/16 X 4
1/4 X 1-1/4
1/4 X 1-3/4
1/4 X 2-1/4
1/4 X 2-3/4
1/4 X 3-1/4
1/4 X 4
1/4 X 5
1/4 X 6
---------SCP 316114
SCP 316134
SCP 316214
SCP 316234
SCP 316314
SCP 3164
SCP 14114
SCP 14134
SCP 14214
SCP 14234
SCP 14314
SCP 144
SCP 145
SCP 146
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
600
600
7
10
12
14
17
20
23
14
19
23
27
31
37
27
32
31634
316114
316134
316214
316234
316314
3164
14114
14134
14214
14234
14314
144
145
146
• Square Socket Drive
• Flat Countersink Head
• Silver RUSPRO® Coated
Price
/C
23.60
25.90
29.80
34.30
37.10
48.90
60.70
36.00
40.50
46.10
52.30
65.20
80.90
116.90
163.00
Part No.
Size
SCR
SCR
SCR
SCR
SCR
SCR
SCR
SCR
SCR
SCR
SCR
3/16 X 1-1/4
3/16 X 1-3/4
3/16 X 2-1/4
3/16 X 2-3/4
3/16 X 3-1/4
3/16 X 4
1/4 X 1-1/4
1/4 X 1-3/4
1/4 X 2-1/4
1/4 X 2-3/4
1/4 X 3-1/4
316114
316134
316214
316234
316314
3164
14114
14134
14214
14234
14314
Driver Size
Fastens up to
Case Qty.
#2
#2
#2
#2
#2
#2
#3
#3
#3
#3
#3
1/4"
3/4"
1-1/4"
1-3/4"
2-1/4"
3"
1/4"
3/4"
1-1/4"
1-3/4"
2-1/4"
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Drill bits not included
Drill bits not included
Part No.
Size
SCR
SCR
SCR
SCR
SCR
SCR
SCR
SCR
SCR
SCR
SCR
3/16 X 1-1/4
3/16 X 1-3/4
3/16 X 2-1/4
3/16 X 2-3/4
3/16 X 3-1/4
3/16 X 4
1/4 X 1-1/4
1/4 X 1-3/4
1/4 X 2-1/4
1/4 X 2-3/4
1/4 X 3-1/4
PHILLIPS FLAT-HEAD
Part No.
Size
Part No.
Case
Qty.
Wt.
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
3/16 X 3/4
3/16 X 1-1/4
3/16 X 1-3/4
3/16 X 2-1/4
3/16 X 2-3/4
3/16 X 3-1/4
3/16 X 4
1/4 X 1-1/4
1/4 X 1-3/4
1/4 X 2-1/4
1/4 X 2-3/4
1/4 X 3-1/4
1/4 X 4
1/4 X 5
---------SCP 316114B
SCP 316134B
SCP 316214B
SCP 316234B
SCP 316314B
SCP 3164B
SCP 14114B
SCP 14134B
SCP 14214B
SCP 14234B
SCP 14314B
SCP 144B
SCP 145B
5,000
4,000
3,000
2,000
1,500
800
800
2,500
2,000
1,500
1,000
800
700
600
31
36
30
25
23
16
18
32
34
33
25
24
26
27
31634B
316114B
316134B
316214B
316234B
316314B
3164B
14114B
14134B
14214B
14234B
14314B
144B
145B
Price
/M
166.40
191.10
213.50
274.20
297.80
415.80
488.80
275.30
321.40
393.30
482.00
563.00
702.30
1052.00
316114B
316134B
316214B
316234B
316314B
3164B
14114B
14134B
14214B
14234B
14314B
Driver Size
Fastens up to
Case Qty.
Price /M
#2
#2
#2
#2
#2
#2
#3
#3
#3
#3
#3
1/4"
3/4"
1-1/4"
1-3/4"
2-1/4"
3"
1/4"
3/4"
1-1/4"
1-3/4"
2-1/4"
4,000
3,000
2,000
1,500
800
800
2,500
2,000
1,500
1,000
800
191.10
213.50
274.20
297.80
415.80
488.80
275.30
321.40
393.30
482.00
563.00
SUPER SCRU-IT® STAINLESS STEEL
410 Stainless Steel RUSPRO® coated
SPECIAL SCRU-IT® (BLUNT TIP)
One drill bit included with each package of 100 anchors
Hex Washer Head for shallow embedment anchoring
HEX WASHER-HEAD
Light duty, stress free fastener for anchoring
applications where drilling depth is limited to 7/8” (22mm)
Part No.
SUH 1478B
15
Size
1/4 X 7/8
Case Qty.
4,000
Case Wt.
30
Price /C
31.80
25.90
29.80
34.30
37.10
48.90
61.80
36.00
40.50
46.10
52.30
65.20
SUPER SCRU-IT® SILVER BULK PACKS
SUPER SCRU-IT® BULK PACKS
HEX WASHER-HEAD
Price /C
Part No.
Size
Pkg.
Qty.
Case
Qty.
Case
Wt.
SSH 14114
SSH 14234
1/4 X 1-1/4
1/4 X 2-3/4
100
100
1,000
1,000
14
28
100
1,000
8
Price
/C
101.20
148.30
PHILLIPS FLAT-HEAD
SSP 316114
3/16 X 1-1/4
61.80
www.ucanfast.com
SCRU-IT® ACCESSORIES
CB SCREWS
Installation scru-tool kit
For cementitious sheathing panels
• Phillips wafer head with underside ribs
• RUSPRO® corrosion resistant coated
CB SPOON POINT SCREWS
For wood studs and light metal studs up to 20ga
• Convenient bit storage
• Cuts installation time by 50%
• Stops over-torquing of screw heads
Part No.
Description
SCRUTOOL
SCRU-IT Installation tool
Price/ea.
65.20
SPARE PARTS FOR SCRU-TOOL
CDP
CDP
CDP
CDP
CDP
CDP
CDP
CDP
CDP
CDP
CDP
1001
1502
1005
1003
1004
2008
1006
1007
1010
2006
2010
Drill adaptor
Sleeve (5-3/4")
Long sleeve (6-1/2")
Detent spring
5/32" Ball bearing
1/8" Ball bearing
1/4" Driver adaptor
5/16" Driver adaptor
Phillips driver adaptor
1/4"-28 Set screw
1/8" Hex key
13.50
18.00
20.80
1.10
1.10
1.10
10.20
10.20
11.30
1.30
.60
SCRU-BITS
Part No.
Size
Case
Qty.
Case
Wt.
Price
/M
CBS 114B
CBS 158B
CBS 214B
8 X 1-1/4
8 X 1-5/8
8 X 2-1/4
5,000
4,000
2,500
31
30
26
92.20
103.40
152.80
CB SELF DRILLING SCREWS
For metal studs up to 12ga
Part No.
Size
Case
Qty.
Case
Wt.
Price
/M
CBT 114B
CBT 158B
8 X 1-1/4
8 X 1-5/8
5,000
4,000
31
31
97.80
120.20
Price
/M
Available in Super Pak Jar (See Page 27)
High performance bits for concrete screw systems
ACOUSTIC LAG SCREWS
Part No.
Size
SCB
SCB
SCB
SCB
SCB
SCB
SCB
SCB
5/32
5/32
5/32
3/16
3/16
3/16
3/16
3/16
5323
5324
5325
3163
3164
3165
3166
3167
X
X
X
X
X
X
X
X
3-1/2
4-1/2
5-1/2
3-1/2
4-1/2
5-1/2
6-1/2
7-1/2
Max. Fastener
Length
Pkg.
Qty.
Price
/ea.
1-3/4
2-3/4
4
1-3/4
2-3/4
4
5
6
10
10
10
10
10
10
10
10
4.30
4.75
5.45
4.30
4.75
5.45
6.20
8.35
Max. Fastener
Length
Pkg.
Qty.
Price
/C
1-3/4
2-3/4
4
1-3/4
2-3/4
4
5
6
100
100
100
100
100
100
100
100
382.10
427.00
483.20
382.10
427.00
483.20
550.60
741.60
EYE LAG FOR WOOD
Part No.
Size
Eye
Dia.
Pkg.
Qty.
Case
Qty.
Case
Wt.
ELS 143
ELS 143B
1/4 X 3
1/4 X 3
.210"
.210"
100
-
1,000
1,000
24
23
246.00
189.90
BULK PACKS
Part No.
Size
SCB
SCB
SCB
SCB
SCB
SCB
SCB
SCB
5/32
5/32
5/32
3/16
3/16
3/16
3/16
3/16
5323B
5324B
5325B
3163B
3164B
3165B
3166B
3167B
X
X
X
X
X
X
X
X
3-1/2
4-1/2
5-1/2
3-1/2
4-1/2
5-1/2
6-1/2
7-1/2
SDS SCRU-BITS
With hex shank for scru-tool sleeve
EYE LAG FOR METAL
TLS
TLS-BN
Part No.
Size
Eye
Dia.
Case
Qty.
Case
Wt.
TLS 142B
TLS 142BN
1/4 X 2
1/4 X 2
.210"
.210"
1,500
1,000
35
29
Price
/M
538.30
543.90
Available in Super Pak Jar (See Page 27)
INSTALLATION TOOL FOR ACOUSTIC LAG SCREWS
Part No.
Size
SCS
SCS
SCS
SCS
5/32
5/32
3/16
3/16
5325
5327
3165
3167
X
X
X
X
5-1/4
7
5-1/4
7
Screw dia.
Max. Fastener
Length
3/16
3/16
1/4
1/4
2-1/4
4
2-1/4
4
NOTE: For 5” & 6” fasteners use IDS 9 - See page 17
Price
/ea.
22.50
23.10
23.10
24.70
Part No.
DLS3
Price/ea.
12.00
16
MASONRY ANCHORING
U-DRIVE® MASONRY ANCHOR SYSTEM
• Permanent and cost effective anchoring
• Quick, easy installation without special tools
• Requires only 1" (25mm) embedment
• Hot dip galvanized for maximum corrosion protection
• High pull out and shear strength
®
U-DRIVE STRESS PLATE
U-DRIVE ANCHORS
Required when fastening insulation
One drill bit included with each package of 100 anchors
Part No.
Anchor
Length
Fastens
up to
Pkg.
Qty.
Case
Qty.
Case
Wt.
INS
INS
INS
INS
INS
INS
INS
INS
INS
1-1/8
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
1/8
1/2
1
1-1/2
2
2-1/2
3
3-1/2
4
100
100
100
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
1,000
1,000
600
600
14
20
24
29
33
40
44
30
32
118
112
2
212
3
312
4
412
5
Price
/C
19.00
24.00
28.00
35.00
40.00
48.00
55.00
60.00
66.00
MAGNUM PACKS
Part No.
Diameter
Type
Pkg.
Qty.
Pkg.
Wt.
SP 1M
3"
Plastic
500
24
Price
/M
325.90
E.I.F.S. DISCS
Drill Bits not included
Part No.
Anchor
Length
Fastens
up to
Pkg.
Qty.
Box
Wt.
Case
Wt.
INS
INS
INS
INS
INS
INS
INS
INS
INS
1-1/8
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
1/8
1/2
1
1-1/2
2
2-1/2
3
3-1/2
4
1,000
1,000
1,000
1,000
1,000
1,000
500
500
500
13
16
21
26
31
38
21
23
25
14
17
22
27
32
39
22
24
26
118M
112M
2M
212M
3M
312M
4M
412M
5M
• Super low profile
• Can also be used with SCRU-IT
Price
/M
135.00
175.00
215.00
275.00
310.00
375.00
425.00
475.00
520.00
• Made from high grade polymer for long service life
• Accepts screws and nails
TYPE PM
Universal disc for Polymer
Modified (PM) and Modified PB
EIFS to fasten rigid insulation to
wood, steel, concrete, and masonry.
For best results use with IND/IDS bits
• Low surface profile
U-DRIVE DRILL BITS
Straight shank
Part No.
Diameter
Pkg.
Qty.
EID 134M
1-3/4" (45MM)
1,000
Price
/M
188.80
TYPE PB
Part No.
Size
IND
IND
IND
IND
IND
.202
.202
.202
.202
.202
312
412
512
712
812
X
X
X
X
X
3-1/2
4-1/2
5-1/2
7-1/2
8-1/2
Maximum.
Fastener Length
Price
/ea.
2
3
4
6
7
3.75
5.05
6.45
11.60
11.60
1-1/2
3-1/2
7
14.00
17.20
19.00
For installing Expanded Polystyrene (EPS)
insulation board for Polymer Based (PB)
EIFS to wood, steel, concrete and masonry.
• Stem sets into insulation
SDS BITS "ANSI"
IDS 4
IDS 6
IDS 9
17
.202 X 4
.202 X 6
.202 X 9-1/2
EIDS 2M
2" (50MM)
1,000
207.90
www.ucanfast.com
DIRECT FASTENING
LV 470 LOW-VELOCITY TOOL
LV 360 LOW-VELOCITY TOOL
•
•
•
•
•
•
•
SEMI-AUTOMATIC
For .300 Flat-Head pins
& UD pins
Safe
Low Recoil
Low Noise Level
Durable & Reliable
Uses .27 Cal. Strip Loads - Max power level: Red
Fasteners up to 2-1/2"
Weighs only 5.2 lbs.
Complete Kit Includes Goggles, Ear Plugs, Cleaning
Brushes,Wiper, Lubricant, Spare Parts,Training Manual and
Heavy-Duty Carrying Case.
Part No.
Description
LV 360K
Deluxe tool kit complete
Price/ea.
640.50
FIELD REPLACEMENT PARTS FOR LV 360
301200
301030
301208
301009
301010
301011
301012
301013
301014
Piston assembly for flathead fasteners
Piston for UN-UD fasteners
Piston ring for 301200 piston
Base plate
Guide
Shear clip
Stop
Steel ball
Annular spring
38.30
38.30
2.05
111.30
46.10
3.50
18.00
1.15
3.95
•
•
•
•
•
•
•
SEMI-AUTOMATIC
with Adjustable Power Dial
For PC pins and UTS
studs up to 2-1/2"
Safe
Low Recoil
Low Noise Level
Adjustable Power Dial
Uses .27 Cal. Strip Loads - Max recommended
power level: Red
Durable & Reliable
Weighs only 7 lbs.
Complete Kit Includes Plastic Case, Goggles, Lubricant, 1-1/4”
Steel Brush, Wood Brush, 5 Stop Rings, 3 Retaining Rings, Rod,
Cleaning Cloth, Training Manual.
Part No.
Description
LV 470K
Deluxe tool kit complete
Price/ea.
784.30
FIELD REPLACEMENT PARTS FOR LV 470
C-05
C-06
C-07
C-07A
C-08
C-09
C-11
Stop ring
Retaining ring, fastener guide
Piston for pins
Piston for threaded studs
Piston ring
Piston guide
Retaining ring, piston guide
3.60
3.60
56.20
56.20
3.60
157.30
5.95
LV 365 LOW-VELOCITY TOOL
ACCESSORIES FOR LV TOOLS
•
•
•
•
•
•
•
•
SEMI-AUTOMATIC
with Adjustable Power Dial
Safe
For .300 Flat-Head pins
Low Recoil
& UD pins
Low Noise Level
Durable & Reliable
Adjustable Power Dial
Uses .27 Cal. Strip Loads - Max power level: Red
Fasteners up to 2-1/2"
Weighs only 5.1 lbs.
Complete Kit Includes Goggles, Ear Plugs, Cleaning
Brushes, Wiper, Lubricant, Spare Parts,Training Manual and
Heavy-Duty Carrying Case.
Part No.
Description
LV 365K
Deluxe tool kit complete
Price/ea.
640.50
FIELD REPLACEMENT PARTS FOR LV 365
36514
36515
36517
36516
36538
36512
36537
36536
Piston assembly
Piston ring
Base plate
Guide
Shear clip
Stop
Steel ball
Annular spring
38.30
2.05
112.40
46.10
3.50
18.00
1.15
3.95
Part No.
Description
LVCK
LVBR1
LVBR2
LVBR3
LVBR4
LVSPR
LVSAFE
LVCASE-360
LVCASE-470
Cleaning kit, (brushes, wiper, lub. spray)
1-3/8 Round brush
5/8 Round brush
Flat brush
5/16 Cleaning brush
PAT Tool spray lube 3FL.oz (85gms)
Safety goggles
Carrying case only - for LV 360 & LV 365
Carrying case only
Price/ea.
33.80
4.75
4.55
4.55
4.75
19.00
9.45
36.00
36.00
18
DIRECT FASTENING
POWER LOADS
.300 FLAT-HEADED FASTENERS
.22 CAL. TYPE A FOR LV 151
Super point
For low-velocity tools
Part No.
Power Level
Pkg.
Qty.
Case
Qty.
CA1 GRA
CA2 BRO
CA3 GRE
CA4 YEL
Gray 1 - Light
Brown 2 Med.-Light
Green 3 Med.-Strong
Yellow 4 - Strong
100
100
100
100
10,000
10,000
10,000
10,000
Case
Wt.
Price
/C
20
20
20
20
16.90
16.90
16.90
16.90
.25 CAL. IN PLASTIC STRIPS
For low-velocity tools
Part No.
Power Level
Pkg.
Qty.
Case
Qty.
CTS GRE
CTS YEL
CTS RED
Green - Light
Yellow - Medium
Red - Strong
100
100
100
10,000
10,000
10,000
Case
Wt.
Price
/C
29
29
29
23.30
23.30
23.30
Fluted guide washers for steel and concrete
Part No.
Shank Length
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
AFH
AFH
AFH
AFH
AFH
AFH
AFH
AFH
AFH
AFH
1/2 Knurled
5/8 Knurled
3/4
1
1-1/4
1-1/2
1-7/8
2-1/4
2-1/2
2-7/8
100
100
100
100
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
5
6
6
7
8
9
12
14
15
17
23.60
29.20
16.90
19.10
21.40
25.30
28.10
31.50
34.90
38.30
13K
16K
19
25
32
37
47
57
62
72
25MM STEEL WASHER FASTENERS
Super point
.27 CAL. IN PLASTIC STRIPS
For UCAN LV360/365. Also for DX350 and DX36.
CHS G
CHS Y
CHS R
Green - Light
Yellow - Medium
Red - Strong
100
100
100
10,000
10,000
10,000
32
32
32
23.30
23.30
23.30
32
32
23.30
25.10
FOR UCAN LV470 AND FOR DX450
CHS R
CHS P
Red - Strong
Purple - Extra strong
100
100
10,000
10,000
.300 FLAT-HEADED ANGLE CLIP ASSEMBLY
Part No.
Shank Length
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
AWI
AWI
AWI
AWI
AWI
AWI
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
100
100
100
100
100
100
1,000
1,000
1,000
1,000
600
600
20
21
25
35
16
19
36.00
39.40
40.50
42.80
46.10
55.10
25
32
37
50
62
75
BULK PACKS
Part No.
Length
Pkg.
Qty.
ACC 32
1-1/4
100
Case
Qty.
Case
Wt.
Price
/C
600
42
57.30
Part No.
Shank Length
AWI 32M
AWI 37M
1-1/4"
1-1/2"
Case Qty. Case Wt.
1000
1000
Price/M
24
25
371.00
383.00
INSULATION PIN
Assembled with 30mm washer
.300 FLAT-HEADED CONDUIT CLIP ASSEMBLY
Part No.
Conduit Size
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
Part No.
Shank Length
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
FCC 38
FCC 12
FCC 34
3/8"
1/2"
3/4"
100
100
100
600
600
600
32
27
32
63.00
65.20
69.70
AWP 37
AWP 47
AWP 62
1-1/4"
1-7/8"
2-1/2"
100
100
100
600
600
600
13
9
10
63.00
65.20
89.90
19
www.ucanfast.com
DIRECT FASTENING
8 mm HEADED FASTENERS
6 mm HEADED FASTENERS
Super point with 8 mm nylon washer
Super point with 12 mm steel washer
For UCAN LV 360*, also for DX 350 & DX 36.
For UCAN LV 470, also for DX 400 & DX 450 tools.
Part No.
Shank Length
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
UD
UD
UD
UD
UD
UD
UD
UD
UD
3/4
7/8
1-1/8
1-1/4
1-1/2
1-7/8
2-1/4
2-1/2
2-7/8
100
100
100
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
6
6
7
8
9
11
13
15
16
27.00
28.10
29.20
32.60
34.90
39.40
41.60
43.90
47.20
100
1,000
5
31.50
19
22
27
32
37
47
57
62
72
KNURLED FOR STEEL
UD 16K
5/8
* Piston 301030 required when UD pins are used in LV 360 tool.
Part No.
Shank Length
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
7/8
1-1/8
1-1/4
1-1/2
1-5/8
1-7/8
2-1/4
2-1/2
2-7/8
3-1/4
100
100
100
100
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
7
8
9
11
11
13
15
16
18
20
29.80
30.90
33.20
36.00
38.30
40.50
41.60
43.90
47.20
58.50
100
100
1,000
1,000
6
7
33.80
36.00
Case
Qty.
Case
Wt.
Price
/C
1,000
1,000
10
11
55.10
50.60
22
27
32
37
42
47
57
62
72
82
KNURLED FOR STEEL
PC 16K
PC 19K
5/8
3/4
COLLATED PINS - 10 PIN MAGAZINE
1/4"-20 THREADED STUDS
With super point for magazine type PA tools
With 12 mm plastic guide washer
For LV 470, (use C-07A piston)
Part No.
Shank Length
Pkg.
Qty.
Case
Qty.
Case
Wt.
Price
/C
UD
UD
UD
UD
UD
UD
UD
UD
UD
UD
5/8
3/4
7/8
1-1/8
1-1/4
1-1/2
1-7/8
2-1/4
2-1/2
2-7/8
100
100
100
100
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
6
6
7
8
9
10
12
14
15
17
20.80
20.80
22.90
22.90
25.00
27.00
29.20
32.60
36.00
38.30
Case
Wt.
Price
/C
16KS
19S
22S
27S
32S
37S
47S
57S
62S
72S
Part No.
Shank Length
UTS 1032K
UTS 245
3/4
3/4
7/16 Knurled
1
Pkg.
Qty.
100
100
"TOP HAT" FASTENER
Part No.
Length
Pkg.
Qty.
Case
Qty.
FTH 19
3/4
100
1,000
7
32.10
* Piston 301030 required when FTH pins are used in LV 360 tool.
20
SCREWDRIVER ACCESSORIES
SCREWDRIVER INSERT BITS
SPRING NUT SETTERS
• Ideal for Stainless Steel fasteners
• Prevents build up of steel shards
PHILLIPS BITS
Standard
Pack
Part No.
Description
PB11
PB21
PB31
PB12
PB22
PB32
PB13
PB23
PB33
PB14
PB24
PB34
PB16
PB26
PB36
No. 1 X 1 Phillips bit
No. 2 X 1 Phillips bit
No. 3 X 1 Phillips bit
No. 1 X 2 Phillips bit
No. 2 X 2 Phillips bit
No. 3 X 2 Phillips bit
No. 1 X 3 Phillips bit
No. 2 X 3 Phillips bit
No. 3 X 3 Phillips bit
No. 1 X 4 Phillips bit
No. 2 X 4 Phillips bit
No. 3 X 4 Phillips bit
No. 1 X 6 Phillips bit
No. 2 X 6 Phillips bit
No. 3 X 6 Phillips bit
25
25
25
25
25
25
25
25
25
25
25
25
1
1
1
Price
/ea.
1.20
1.20
1.20
1.95
1.95
1.95
3.10
3.10
3.10
3.85
3.85
3.85
6.75
6.75
6.75
No. 2 X 1 Phillips bit - Reduced shank
No. 2 X 2 Phillips bit - Reduced shank
25
25
1.20
1.80
SQUARE RECESS BITS - 2 PIECE HEX SHANK
• Colour coded
Black No. 3
Red No. 2
Description
SNS 14
SNS 516
SNS 38
1/4 X 2-1/2 Spring nut setter
5/16 X 2-1/2 Spring nut setter
3/8 X 2-1/2 Spring nut setter
Standard
Pack
10
10
10
Price
/ea.
10.20
10.70
11.30
MAGNETIC NUT SETTERS
MAGNETIC NUT SETTERS - SHORT
DRYWALL BITS - REDUCED SHANK
PR21
PR22
Part No.
Green No. 1
Part No.
Description
MNS
MNS
MNS
MNS
MNS
MNS
MNS
MNS
MNS
1/4 X 1-11/16 Mag nut setter
5/16 X 1-11/16 Mag nut setter
3/8 X 1-3/4 Mag nut setter
7/16 X 1-3/4 Mag nut setter
1/4 X 2-1/2 Mag nut setter
5/16 X 2-1/2 Mag nut setter
3/8 X 2-1/2 Mag nut setter
7/16 X 2-1/2 Mag nut setter
1/2 X 2-1/2 Mag nut setter
14S
516S
38S
716S
14
516
38
716
12
Standard
Pack
10
10
10
10
10
10
10
10
10
Price
/ea.
6.20
6.60
7.40
7.90
8.50
9.10
9.60
10.20
11.90
MAGNETIC NUT SETTERS - LONG
RS11
RS21
RS31
RS12
RS22
RS32
RS13
RS23
RS33
RS14
RS24
RS34
RS16
RS26
RS36
No. 1
No. 2
No. 3
No. 1
No. 2
No. 3
No. 1
No. 2
No. 3
No. 1
No. 2
No. 3
No. 1
No. 2
No. 3
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
1
1
2
2
2
3
3
3
4
4
4
6
6
6
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
recess
recess
recess
recess
recess
recess
recess
recess
recess
recess
recess
recess
recess
recess
recess
bit
bit
bit
bit
bit
bit
bit
bit
bit
bit
bit
bit
bit
bit
bit
25
25
25
25
25
25
25
25
25
25
25
25
1
1
1
2.05
2.05
2.05
2.40
2.40
2.40
3.15
3.15
3.15
4.00
4.00
4.00
6.45
6.45
6.45
SQUARE RECESS BITS - ONE PIECE ROUND SHANK
Part No.
Description
MNS
MNS
MNS
MNS
MNS
MNS
1/4 X 6 Mag nut setter
5/16 X 6 Mag nut setter
3/8 X 6 Mag nut setter
1/4 X 12 Mag nut setter
5/16 X 12 Mag nut setter
3/8 X 12 Mag nut setter
14L
516L
38L
14XL
516XL
38XL
Price/ea.
16.90
19.10
21.40
43.90
46.10
48.40
INSERT BIT HOLDERS
MAGNETIC BIT HOLDERS
Stainless Steel
RB01
RB21
RB31
RB02
RB12
RB22
RB32
RB13
RB23
RB33
RB24
RB34
RB16
RB26
RB36
No. 0
No. 2
No. 3
No. 0
No. 1
No. 2
No. 3
No. 1
No. 2
No. 3
No. 2
No. 3
No. 1
No. 2
No. 3
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
1
1
2
2
2
2
3
3
3
4
4
6
6
6
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
recess
recess
recess
recess
recess
recess
recess
recess
recess
recess
recess
recess
recess
recess
recess
bit
bit
bit
bit
bit
bit
bit
bit
bit
bit
bit
bit
bit
bit
bit
25
25
25
25
25
25
25
25
25
25
25
25
1
1
1
1.30
1.30
1.30
1.95
1.95
1.95
1.95
3.00
3.00
3.00
3.50
3.50
6.75
6.75
6.75
Part No.
Description
MBH 3
1/4 X 3 Magnetic bit holder bit
Standard
Pack
Price
/ea.
10
11.90
QUICK CHANGE BIT HOLDER
SLOTTED BITS
SL22
21
7/32 X 2 Slotted bit
1
2.40
Part No.
Description
MBH 25Q
1/4 X 2-1/2 Quick change magnetic bit holder
Price/ea.
18.00
www.ucanfast.com
METAL FASTENERS
®
U-DRILLS BULK CASES
SELF DRILLING METAL SCREWS
• U-DRILLS® Self Drilling Screws are made to the highest industry quality standards for outstanding performance.
• All screws are available painted or protective coated to order.
SOCKET PAN HEAD
HEX WASHER HEAD
Zinc Plated
Zinc Plated
Part No.
Size
TSP
TSP
TSP
TSP
TSP
TSP
TSP
TSP
TSP
TSP
TSP
TSP
TSP
TSP
TSP
6-20 X 3/8
2
6-20 X 1/2
2
8-18 X 1/2
2
8-18 X 5/8
2
8-18 X 3/4
2
8-18 X 3/4 white hd 2
8-18 X 1
2
8-18 X 1-1/2
2
8-18 X 2
2
10-16 X 1/2
2
10-16 X 5/8
3
10-16 X 3/4
3
10-16 X 1
3
10-16 X 1-1/4 3
10-16 X 1-1/2 3
638B
612B *
812B *
858B *
834B *
834BW
81B *
8112B *
82B
1012B *
1058B *
1034B *
101B *
10114B *
10112B *
Point
Drilling
Capacity
Case
Qty.
Case
Wt.
Price
/M
.090/13 ga
.090/13 ga
.100/12 ga
.100/12 ga
.100/12 ga
.100/12 ga
.100/12 ga
.100/12 ga
.100/12 ga
.110/12 ga
.175/7 ga
.175/7 ga
.175/7 ga
.175/7 ga
.175/7 ga
15,000
15,000
15,000
10,000
10,000
10,000
7,500
6,000
3,000
10,000
8,000
8,000
5,000
4,000
4,000
28
33
47
38
42
42
37
44
27
45
40
45
35
33
39
28.60
29.80
36.60
39.40
42.80
80.90
50.00
66.30
88.80
48.40
54.00
58.50
69.70
82.10
93.30
10,000
8,000
5,000
4,000
5,000
3,000
42
45
35
39
47
39
78.70
92.20
101.20
148.40
148.30
195.60
* Available in Super Pak Jar (See Page 28)
RUSPRO ® COATED
TRP
TRP
TRP
TRP
TRP
TRP
834B
1034B
101B
10112B
121B
12112B
8-18 X 3/4
10-16 X 3/4
10-16 X 1
10-16 X 1-1/2
12-14 X 1
12-14 X 1-1/2
2
3
3
3
3
3
.100/12 ga
.175/7 ga
.175/7 ga
.175/7 ga
.210/5 ga
.210/5 ga
PHILLIPS PAN HEAD
Zinc Plated
Part No.
Size
TPP
TPP
TPP
TPP
TPP
TPP
TPP
8-18 X 1/2
8-18 X 3/4
8-18 X 1
8-18 X 1-1/2
10-16 X 1/2
10-16 X 3/4
10-16 X 1
812B
834B
81B
8112B
1012B
1034B
101B
Point
Drilling
Capacity
Case
Qty.
Case
Wt.
Price
/M
2
2
2
2
2
3
3
.100/12 ga
.100/12 ga
.100/12 ga
.100/12 ga
.110/12 ga
.175/7 ga
.175/7 ga
15,000
10,000
7,500
6,000
10,000
8,000
5,000
46
42
39
43
46
46
33
36.60
42.80
50.00
66.30
48.40
58.50
69.70
PHILLIPS MODIFIED TRUSS HEAD
Zinc Plated
Part No.
Size
TPW 812B *
TPW 8114B
TPW 1034B
8-18 X 1/2
8-18 X 1-1/4
10-16 X 3/4
Point
Drilling
Capacity
Case
Qty.
Case
Wt.
Price
/M
2
2
3
.100/12 ga
.100/12 ga
.175/7 ga
10,000
5,000
8,000
40
32
46
38.30
67.50
58.50
Part No.
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
812B *
812BW
812BT
858B *
834B *
81B *
8112B *
1012B *
1058B *
1034B *
1034BW
101B *
10114B *
10112B *
102B
10212B
103B
1234B *
121B *
12114B
12112B *
122B *
12212B
1434B *
141B *
141BW
141BT
14114B *
14114BY
14112B *
142B
14212B
143B
144B
146B
Size
Point
Drilling
Capacity
8-18 X 1/2
2
.100/12 ga
8-18 X 1/2 white hd 2 .100/12 ga
8-18 X 1/2 tan hd 2
.100/12 ga
8-18 X 5/8
2
.100/12 ga
8-18 X 3/4
2
.100/12 ga
8-18 X 1
2
.100/12 ga
8-18 X 1-1/2
2
.100/12 ga
10-16 X 1/2
2
.110/12 ga
10-16 X 5/8
3
.175/7 ga
10-16 X 3/4
3
.175/7 ga
10-16 X 3/4white hd 3 .175/7 ga
10-16 X 1
3
.175/7 ga
10-16 X 1-1/4 3
.175/7 ga
10-16 X 1-1/2 3
.175/7 ga
10-16 X 2
3
.175/7 ga
10-16 X 2-1/2 3
.175/7 ga
10-16 X 3
3
.175/7 ga
12-14 X 3/4
3
.210/5 ga
12-14 X 1
3
.210/5 ga
12-14 X 1-1/4 3
.210/5 ga
12-14 X 1-1/2 3
.210/5 ga
12-14 X 2
3
.210/5 ga
12-14 X 2-1/2 3
.210/5 ga
1/4-14 X 3/4
3
.220/4 ga
1/4-14 X 1
3
.220/4 ga
1/4-14 X 1white hd 3 .220/4 ga
1/4-14 X 1tan hd 3
.220/4 ga
1/4-14 X 1-1/4 3
.220/4 ga
1/4-14 X 1-1/4yellow zinc 3 .220/4 ga
1/4-14 X 1-1/2 3
.220/4 ga
1/4-14 X 2
3
.220/4 ga
1/4-14 X 2-1/2 3
.220/4 ga
1/4-14 X 3
3
.220/4 ga
1/4-14 X 4
3
.220/4 ga
1/4-14 X 6
3
.220/4 ga
Case
Qty.
Case
Wt.
Price
/M
10,000
10,000
10,000
10,000
10,000
8,000
6,000
10,000
8,000
8,000
8,000
5,000
4,000
3,000
2,000
1,500
1,000
6,000
5,000
4,000
3,000
2,000
1,500
4,000
3,000
3,000
3,000
2,000
2,000
2,000
1,500
1,000
1,000
500
500
32
34
34
38
43
43
43
48
42
46
46
36
35
31
25
22
17
47
46
44
40
33
30
48
45
45
45
34
34
38
36
28
34
19
31
38.30
68.60
68.60
42.80
45.00
54.00
70.90
50.60
55.60
58.50
123.60
72.00
85.40
97.80
123.60
152.80
179.80
79.80
92.20
106.80
130.40
164.10
184.30
119.10
134.90
157.30
157.30
157.30
168.60
178.70
213.50
297.80
320.30
500.00
1213.50
10,000
10,000
8,000
3,000
6,000
5,000
4,000
3,000
2,000
3,000
3,000
2,000
2,000
1,500
1,000
32
32
46
31
47
46
46
40
33
42
47
34
38
36
34
94.40
122.50
106.80
142.70
123.60
142.70
166.40
191.10
243.80
213.50
213.50
267.50
273.10
348.40
404.50
* Available in Super Pak Jar (See Page 28)
RUSPRO® COATED
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
812B
812BW
1034B
10112B
1234B
121B
12114B
12112B
122B
141B
14201B
14114B
14112B
142B
143B
8-18 X 1/2
8-18 X 1/2
10-16 X 3/4
10-16 X 1-1/2
12-14 X 3/4
12-14 X 1
12-14 X 1-1/4
12-14 X 1-1/2
12-14 X 2
1/4-14 X 1
1/4-20 X 1
1/4-14 X 1-1/4
1/4-14 X 1-1/2
1/4-14 X 2
1/4-14 X 3
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
.100/12ga
.100/12ga
.175/7 ga
.175/7 ga
.210/5 ga
.210/5 ga
.210/5 ga
.210/5 ga
.210/5 ga
.220/4 ga
.220/4 ga
.220/4 ga
.220/4 ga
.220/4 ga
.220/4 ga
NEED SOMETHING SPECIAL?
We can offer timely delivery and very competitive prices
on most types and sizes of custom screws.
* Available in Super Pak Jar (See Page 28)
22
METAL FASTENERS
U-DRILLS® BULK CASES
SELF DRILLING METAL SCREWS
HEX WASHER HEAD
HEAVY GAUGE APPLICATIONS
Zinc Plated
HEX WASHER HEAD
RUSPRO® Coated
With Bonded EPDM Washer
Part No.
Size
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
10-16 X 3/4
12-14 X 3/4
12-14 X 1
12-14 X 1-1/4
12-14 X 1-1/2
12-14 X 2
1/4-14 X 3/4
1/4-14 X 1
1/4-14 X 1-1/4
1/4-14 X 1-1/2
1/4-14 X 2
1/4-14 X 3
1/4-14 X 4
1034BN
1234BN
121BN
12114BN
12112BN
122BN
1434BN
141BN
14114BN
14112BN
142BN
143BN
144BN
Point
3
3
3
3
3
3
3
3
3
3
3
3
3
Drilling
Capacity
Case
Qty.
.175/7
.210/5
.210/5
.210/5
.210/5
.210/5
.220/4
.220/4
.220/4
.220/4
.220/4
.220/4
.220/4
3,000
3,000
3,000
2,000
2,000
2,000
3,000
2,000
2,000
1,000
1,000
1,000
500
ga
ga
ga
ga
ga
ga
ga
ga
ga
ga
ga
ga
ga
Case
Wt.
Price
/M
26
32
37
28
31
36
46
42
40
23
28
37
23
166.40
178.70
184.30
202.30
213.50
314.70
213.50
225.90
258.50
261.90
320.30
404.50
584.30
RUSPRO® COATED SCREWS
+ TYPE II CLAD EPDM WASHER
Part No.
Size
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
12-24 X 7/8
12-24 X 1-1/4
12-24 X 1-1/2
12-24 X 2
1/4-28 X 3
1/4-28 X 4
1/4-28 X 5
1/4-28 X 6
1/4-28 X 7
1/4-28 X 8
1278B4 *
12114B5 *
12112B5 *
122B5 *
143B5
144B5
145B5
146B5
147B5
148B5
Point
4
5
5
5
5
5
5
5
5
5
Drilling
Capacity
Case
Qty.
Case
Wt.
Price
/M
.312/
.500/
.500/
.500/
.500/
.500/
.500/
.500/
.500/
.500/
5,000
4,000
3,000
1,500
1,000
500
500
500
400
400
44
43
39
25
37
24
30
36
36
35
224.80
331.50
382.10
500.00
702.30
1011.30
1370.80
1595.60
2003.40
2123.60
3,500
3,000
2,000
1,500
1,000
500
500
500
400
40
40
31
29
40
26
32
36
36
404.50
536.00
583.20
702.30
952.90
1213.50
1657.40
1813.50
2373.10
5/16"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
* Available in Super Pak Jar (See Page 28)
RUSPRO® COATED SCREWS
+ TYPE II CLAD EPDM WASHER
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
1234BN
121BN
12114BN
12112BN
141BN
14114BN
14112BN
142BN
143BN
12-14 X 3/4
12-14 X 1
12-14 X 1-1/4
12-14 X 1-1/2
1/4-14 X 1
1/4-14 X 1-1/4
1/4-14 X 1-1/2
1/4-14 X 2
1/4-14 X 3
3
3
3
3
3
3
3
3
3
.210/5
.210/5
.210/5
.210/5
.220/4
.220/4
.220/4
.220/4
.210/5
ga
ga
ga
ga
ga
ga
ga
ga
ga
3,000
3,000
2,000
2,000
2,000
2,000
1,000
1,000
700
32
37
28
31
42
40
23
28
26
285.50
309.00
345.00
357.40
381.00
451.70
476.50
523.60
583.20
Automated washer assembly available for most sizes
not listed. See page 25
WOOD TO METAL APPLICATIONS
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
1278B4N
12114B5N
12112B5N
122B5N
143B5N
144B5N
145B5N
146B5N
148B5N
12-24 X 7/8
12-24 X 1-1/4
12-24 X 1-1/2
12-24 X 2
1/4-28 X 3
1/4-28 X 4
1/4-28 X 5
1/4-28 X 6
1/4-28 X 8
4
5
5
5
5
5
5
5
5
.312/
.500/
.500/
.500/
.500/
.500/
.500/
.500/
.500/
5/16"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
HEX WASHER HEAD - EXTRA DRILL CAPACITY
SOCKET WAFER HEAD WITHOUT REAMER
®
RUSPRO Coated
Zinc Plated
Part No.
Size
TSW
TSW
TSW
TSW
TSW
TSW
TSW
TSW
TSW
TSW
TSW
TSW
10-16 X 3/4
10-24 X 3/4
10-24 X 1
10-24 X 1-1/4
10-24 X 1-1/2
12-24 X 2
12-24 X 2-1/2
12-24 X 3
12-24 X 4
1/4-20 X 1-1/2
1/4-20 X 2-1/2
1/4-20 X 3
101634B
1034B *
101B *
10114B *
10112B
122B
12212B
123B
124B
14112B
14212B
143B
Point
3
3
3
3
3
3
3
3
3
3
3
3
Drilling
Capacity
Case
Qty.
.175/7
.175/7
.175/7
.175/7
.175/7
.210/5
.210/5
.210/5
.210/5
.210/5
.210/5
.210/5
8,000
8,000
5,000
3,000
3,000
1,500
1,000
1,000
800
2,000
1,000
1,000
ga
ga
ga
ga
ga
ga
ga
ga
ga
ga
ga
ga
Case
Wt.
Price
/M
45
45
36
26
31
29
24
22
27
37
29
34
82.10
82.10
89.90
103.40
125.90
178.70
245.00
275.30
500.00
242.70
332.60
381.00
SOCKET WAFER HEAD WITH REAMER
Part No.
Size
Point
Drilling
Capacity
Case
Qty.
Case
Wt.
TRH
TRH
TRH
TRH
TRH
TRH
12-24 X 1-1/4
12-24 X 1-1/2
12-24 X 2
1/4-28 X 3
1/4-28 X 4
1/4-28 X 6
5
5
5
5
5
5
0.500
0.500
0.500
0.500
0.500
0.500
4,000
3,000
1,500
1,000
500
500
48
579.80
43
640.50
29
730.40
32 1101.20
22 1224.80
32 2685.40
12114MB5
12112MB5
122MB5
143MB5
144MB5
146MB5
STITCH LAPPING SCREW
Zinc Plated
Available with Bonded EPDM Washer
TSW
TSW
TSW
TSW
TSW
10112RB * 10-24 X 1-1/2
122RB * 12-24 X 2
12212RB * 12-24 X 2-1/2
123RB * 12-24 X 3
124RB
12-24 X 4
3
4
4
4
4
.175/7 ga
.312/5/16"
.312/5/16"
.312/5/16"
.312/5/16"
* Available in Super Pak Jar (See Page 28)
23
3,000
1,500
1,000
1,000
800
30
28
23
27
28
166.40
234.90
309.00
357.40
583.20
Price
/M
Part No.
Description
SHW 1478B
SHWN 1478B
SHW 1478LB
SHWN 1478LB
1/4-14
1/4-14
1/4-14
1/4-14
X
X
X
X
7/8
7/8
7/8
7/8
HWH
w/ EPDM washer
HWH
w/ EPDM washer
New size in red
AF
Case
Point Qty.
Case
Wt.
5/16"
5/16"
3/8"
3/8"
1
1
1
1
39
37
39
41
3,500
2,500
3,500
2,500
Price
/M
152.80
230.40
168.60
261.90
www.ucanfast.com
METAL FASTENERS
SPECIALTY APPLICATIONS
ALUMINUM APPLICATIONS
SHARP POINT SCREWS
®
RUSPRO Coated
RUSPRO® Coated
Size
TRH
TRH
TRH
TRH
12-14 X 3/4
12-14 X 1
12-14 X 2
1/4-14 X 1
1234BA
121BA
122BA
141BA
Point
3
3
3
3
Drilling
Capacity
Case
Qty.
.210/5
.210/5
.210/5
.220/4
6,000
5,000
2,000
3,000
ga
ga
ga
ga
Case
Wt.
Price
/M
47
46
33
42
123.60
140.50
230.40
202.30
OVAL COUNTERSINK HEAD - ZINC PLATED
TPO
Part No.
Size
TPO 61B
TSO 6114B
6-20 X 1
6-20 X 1-1/4
Part No.
Size
SRP 1058B
SRP 102B
SRU 1034B
SRF 10112B
10
10
10
10
X
X
X
X
5/8
2
3/4
1-1/2
Head Style
Case
Qty.
Case
Wt.
Socket
Socket
Socket
Socket
8,000
2,000
8,000
4,000
41
24
44
32
pan
pan
flat undercut
flat - Type"A"
Price
/M
66.30
146.10
72.00
123.60
THREAD CUTTING SCREW TYPE F
Square socket - RUSPRO® Coated
TSO
Point
Drilling
Capacity
Case
Qty.
Case
Wt.
Price
/M
2
2
.090/13 ga
.090/13 ga
12,000
10,000
36
40
41.60
54.00
U-DRILLS® 100 PACKS - ZINC PLATED
TSP
SRF
SRU
Specially designed point for optimum performance in
aluminum.
Part No.
SRP
Part No.
Size
Head Style
Case
Qty.
Case
Wt.
Price
/M
FRP 1012B
10-32 X 1/2
Truss head
10,000
46
88.80
Price
/M
MACHINE SCREWS
Square socket - RUSPRO® Coated
THW
SOCKET PAN HEAD
Part No.
Size
Point
Drilling
Capacity
Pkg.
Qty.
Case
Qty.
Case
Wt.
TSP
TSP
TSP
TSP
TSP
TSP
TSP
TSP
6-20 X 1/2
8-18 X 1/2
8-18 X 5/8
8-18 X 3/4
8-18 X 1
10-16 X 1/2
10-16 X 3/4
10-16 X 1
2
2
2
2
2
2
2
2
.090/13 ga
.100/12 ga
.100/12 ga
.100/12 ga
.100/12 ga
.110/12 ga
.175/7 ga
.175/7 ga
100
100
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
3
5
5
5
6
5
7
7
7.10
7.75
8.35
8.65
9.45
9.45
10.40
11.90
.100/12 ga
.100/12 ga
.100/12 ga
.100/12 ga
.110/12 ga
.175/7 ga
.175/7 ga
.175/7 ga
.210/5 ga
.210/5 ga
.210/5 ga
.220/4 ga
.220/4 ga
.220/4 ga
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
5
5
5
6
6
10
7
8
9
11
14
13
15
19
7.75
8.65
8.65
9.45
9.45
16.10
10.40
11.90
12.80
13.50
19.70
16.60
19.70
21.90
612
812
858
834
81
1012
1034
101
Price
/C
812
858
834
81
1012
10112
1034
101
1234
121
12112
1434
141
14112
8-18 X 1/2
8-18 X 5/8
8-18 X 3/4
8-18 X 1
10-16 X 1/2
10-16 X 1-1/2
10-16 X 3/4
10-16 X 1
12-14 X 3/4
12-14 X 1
12-14 X 1-1/2
1/4-14 X 3/4
1/4-14 X 1
1/4-14 X 1-1/2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
Size
Head Style
Case
Qty.
Case
Wt.
MST 1012B
MSR 1434B
MSR 141B
MSR 142B
MSR 14212B
10-32 X 1/2
1/4-20 X 3/4
1/4-20 X 1
1/4-20 X 2
1/4-20 X 2 -1/2
Truss head
Round head
Round head
Round head
Round head
10,000
4,000
3,000
1,500
1,000
44
51
48
22
12
83.20
150.60
168.60
300.00
357.40
SELF TAPPING SCREWS - ZINC PLATED
HEX WASHER HEAD
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
Part No.
Part No.
Size
Head
Point
Case
Qty.
Case
Wt.
Price
/M
AST 6112B
AHT 6112B
6 X 1-1/2
6 X 1-1/2
Truss
HWH
A
A
6,000
6,000
30
30
45.00
45.00
FLAT COUNTERSINK HEAD - ZINC PLATED
SOCKET WAFER HEAD
TSW
TSW
TSW
TSW
TSW
TSW
TSW
TSW
TSW
TSW
1034
101
10114
10112
122
10112R
122R
12212R
123R
10-24
10-24
10-24
10-24
12-24
10-24
12-24
12-24
12-24
X
X
X
X
X
X
X
X
X
3/4
1
1-1/4
1-1/2
2
1-1/2
2
2-1/2
3
3
3
3
3
3
3
4
4
4
TSW - R
.175/7 ga
.175/7 ga
.175/7 ga
.175/7 ga
.210/5 ga
.175/7 ga
.312/5/16"
.312/5/16"
.312/5/16"
100
100
100
100
100
100
100
100
100
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
7
7
9
10
18
11
18
19
26
14.30
15.80
17.70
21.90
28.70
28.10
38.80
51.20
59.60
Part No.
Size
TSF 858B
8-18 X 5/8
Point
Drilling
Capacity
Case
Qty.
Case
Wt.
Price
/M
2
.100/13 ga
10,000
27
39.40
SPECIAL COATING
RUSPRO ® and other coating can be applied to all screws.
PAINTED SCREW HEADS
"High solids" epoxy coating, in a wide range of colours,
applied to screw heads.
24
METAL FASTENERS
U-DRILLS® STAINLESS STEEL - BULK CASES
All UCAN grade 410 hardened stainless
steel fasteners are RUSPRO ® coated to
prevent discolouring due to exposure.
®
RUSPRO coating provides excellent
resistance to atmospheric corrosion and
road salt. (See specification on page 31)
HEX WASHER HEAD
410 STAINLESS STEEL HARDENED RUSPRO® COATED
Part No.
Size
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
8-18 X 1/2
10-16 X 3/4
12-14 X 3/4
12-14 X 1
12-14 X 1-1/2
12-14 X 2
1/4-14 X 3/4
1/4-14 X 1
1/4-14 X 1-1/4
1/4-14 X 1-1/2
1/4-14 X 2
1/4-14 X 3
812BSS *
1034BSS *
1234BSS
121BSS *
12112BSS
122BSS
1434BSS *
141BSS *
14114BSS
14112BSS
142BSS
143BSS
Point
Drilling
Capacity
Case
Qty.
Case
Wt.
Price
/M
2
3
3
3
3
3
3
3
3
3
3
3
.100/12 ga
.175/7 ga
.210/5 ga
.210/5 ga
.210/5 ga
.210/5 ga
.220/4 ga
.220/4 ga
.220/4 ga
.220/4 ga
.220/4 ga
.220/4 ga
10,000
8,000
6,000
5,000
3,000
2,000
4,000
3,000
2,000
2,000
1,500
1,000
34
50
47
43
40
33
48
45
34
38
36
34
196.70
284.30
428.10
500.00
655.10
761.90
589.90
667.50
768.60
839.40
1042.80
1421.40
* Available in SUPER PAK JAR (SEE PAGE 28)
410 STAINLESS STEEL HARDENED RUSPRO® COATED
with Bonded EPDM 18-8 Stainless Steel Washer
SQUARE SOCKET PAN HEAD
410 STAINLESS STEEL HARDENED RUSPRO® COATED
Part No.
Size
TRP
TRP
TRP
TRP
TRP
TRP
TRP
TRP
TRP
TRP
TRP
TRP
6-20 X 1/2
8-18 X 1/2
8-18 X 3/4
8-18 X 1
8-18 X 1-1/4
8-18 X 1-1/2
10-16 X 3/4
10-16 X 1
10-16 X 1-1/4
10-16 X 1-1/2
10-16 X 2
12-14 X 1
612BSS
812BSS *
834BSS
81BSS
8114BSS
8112BSS
1034BSS *
101BSS
10114BSS
10112BSS
102BSS
121BSS
Point
Drilling
Capacity
Case
Qty.
Case
Wt.
Price
/M
2
2
2
2
2
2
3
3
3
3
3
3
.090/13 ga
.100/12 ga
.100/12 ga
.100/12 ga
.100/12 ga
.100/12 ga
.175/7 ga
.175/7 ga
.175/7 ga
.175/7 ga
.175/7 ga
.210/5 ga
15,000
15,000
10,000
7,500
6,000
6,000
8,000
5,000
4,000
4,000
2,000
5,000
28
48
42
37
40
44
47
35
33
39
24
47
185.40
202.30
225.90
268.60
316.90
354.00
284.30
367.40
449.50
516.90
601.20
458.50
* Available in Super Pak Jar (See Page 28)
FLAT COUNTERSINK HEAD
410 STAINLESS STEEL HARDENED RUSPRO® COATED
Part No.
Size
TRF
TRF
TRF
TRF
TRF
TRF
10-16
10-16
10-16
10-16
12-14
12-14
1034BSS
101BSS
10114BSS
10112BSS
12114BSS
12112BSS
Point
X
X
X
X
X
X
3/4
1
1-1/4
1-1/2
1-1/4
1-1/2
3
3
3
3
3
3
Drilling
Capacity
Case
Qty.
.175/7
.175/7
.175/7
.175/7
.210/5
.210/5
8,000
5,000
4,000
4,000
4,000
3,000
ga
ga
ga
ga
ga
ga
Case
Wt.
Price
/M
47
35
33
39
44
40
274.20
321.40
404.50
464.10
559.60
631.50
SQUARE SOCKET PAN HEAD - TAPPING
18.8 STAINLESS STEEL PASSIVATED
Part No.
Size
TRH
TRH
TRH
TRH
TRH
TRH
TRH
TRH
12-14 X 3/4
12-14 X 1
12-14 X 1-1/2
1/4-14 X 1
1/4-14 X 1-1/4
1/4-14 X 1-1/2
1/4-14 X 2
1/4-14 X 3
1234BSSN
121BSSN
12112BSSN
141BSSN
14114BSSN
14112BSSN
142BSSN
143BSSN
Point
3
3
3
3
3
3
3
3
Drilling
Capacity
Case
Qty.
.210/5
.210/5
.210/5
.220/4
.220/4
.220/4
.220/4
.210/5
3,000
3,000
2,000
2,000
2,000
1,000
1,000
700
ga
ga
ga
ga
ga
ga
ga
ga
Case
Wt.
Price
/M
32
37
31
42
40
23
28
26
532.60
601.20
725.90
774.20
863.00
928.10
1168.60
1642.70
Part No.
Size
Point
STA 812BSS
STA 812BSSN
STA 834BSSN
8 X 1/2
8 X 1/2
8 X 3/4
A
A
A
w/EPDM washer
w/EPDM washer
Case
Qty.
Case
Wt.
15,000
7,000
6,000
31
36
34
Price
/M
93.30
257.40
261.90
STITCH LAPPING SCREW
410 STAINLESS STEEL HARDENED RUSPRO® COATED
Available with Bonded EPDM 18-8 Stainless Steel Washer
AUTOMATED SCREW/WASHER ASSEMBLY
Part No.
Description
AF Point
SRH 1478BSS 1/4-14 X 7/8
5/16"
SRH 1478BSSN 1/4-14 X 7/8 w/EPDM washer 5/16"
25
1
1
Case
Qty.
Case
Wt.
3,500
2,500
50
37
Price
/M
631.50
845.00
UCAN offers automated assembly of many types of screw with
bonded EPDM or neoprene washers. Please call for a quote.
Capacity: Screw diameter # 8 – 14 Length 3/4" – 2-7/8"
www.ucanfast.com
METAL FASTENERS
SHARP POINT SELF-PIERCING
SIDE LAP - HVAC SCREWS
Zinc Plated
HEX WASHER HEAD
Zinc Plated
• Twinfast thread design
for sheet metal industry
HEX WASHER HEAD
Part No.
Head Style
Size
Case
Qty.
Case
Wt.
Price
/M
STHS 8916B
STH 8916B *
STH 834B
STH 81B
STH 8114B
STH 8112B
STH 1038B
STH 1012B
STH 1058B
STH 1034B
Hex/Socket
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
8 X 9/16
8 X 9/16
8 X 3/4
8X1
8 X 1-1/4
8 X 1-1/2
10 X 3/8
10 X 1/2
10 X 5/8
10 X 3/4
10,000
10,000
10,000
8,000
7,000
5,000
10,000
10,000
8,000
8,000
33
33
41
41
43
49
43
48
42
35
39.40
33.80
41.60
46.10
54.00
79.80
62.00
67.00
69.00
80.90
6 X 3/8
8 X 9/16
8 X 1-1/4
8 X 1-1/2
10 X 2
15,000
10,000
7,000
5,000
2,000
31
33
43
49
24
57.30
63.00
92.20
98.90
116.90
• Attaches multiple layers
of light gauge sheet metal
• Designed for connecting spiral duct sections
Part No.
Head Style
Size
Case
Qty.
Case
Wt.
UTH 812B
UTH 1034B
Hex
Hex
8 X 1/2
10 X 3/4
10,000
8,000
36
62
Price
/M
48.40
76.50
BONDED EPDM SEALING WASHERS
3 Types to suit most applications
PAINTED HEAD
STH
STH
STH
STH
STH
638BW
8916BW
8114BAW
8112BW
102BW
Hex/White
Hex/White
Hex/Arctic white
Hex/White
Hex/White
SOCKET PAN HEAD
TYPE I
Zinc Plated
Galvanized Steel - Z 27 spec. Normally used with
zinc plated screws.
Part No.
Head Style
Size
STP
STP
STP
STP
STP
STP
STP
STP
Socket
Socket
Socket
Socket
Socket
Socket
Socket
Socket
6
6
6
8
8
8
8
8
638BW
658BW
658B
8916B *
834B
81B
8114B
8112B
pan white
pan white
pan
pan
pan
pan
pan
pan
X
X
X
X
X
X
X
X
3/8
5/8
5/8
9/16
3/4
1
1-1/4
1-1/2
Case
Qty.
Case
Wt.
15,000
15,000
15,000
10,000
10,000
10,000
7,000
6,000
31
35
35
34
42
50
43
46
Price
/M
41.60
41.60
23.60
33.80
41.60
47.20
56.20
64.10
Zinc Plated
New size in red
Case
Qty.
Case
Wt.
9/16
3/4
1
1-1/4
1-1/2
2
2-1/2
3
10,000
10,000
8,000
5,000
4,000
2,000
2,000
1,000
30
49
45
33
31
25
24
33
34.90
41.60
47.20
55.10
61.80
82.10
101.20
133.80
8 X 9/16
8 X 3/4
8X1
8 X 1-1/4
10 X 2
8X2
8 X 2-1/2
8X3
10,000
10,000
8,000
5,000
2,000
2,000
2,000
1,000
26
43
34
32
25
25
24
33
64.10
82.10
75.30
114.60
123.60
93.30
106.80
139.90
Head Style
Size
SPW
SPW
SPW
SPW
SPW
SPW
SPW
SPW
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
8
8
8
8
8
8
8
8
8916B *
834B
81B
8114B
8112B
82B
8212B
83B
X
X
X
X
X
X
X
X
Price
/M
PAINTED HEAD
SPW
SPW
SPW
SPW
SPW
SPW
SPW
SPW
8916BW
834BW
81BW
8114BW
102BW
82BW
8212BW
83BW
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
white
white
white
white
white
white
white
white
Screw
Size
Washer
Dia.
Pkg
Qty.
Case
Qty.
Price
/M
SW 10
SW 1012
SW 14
8-10
10-12
14
12
14
16
500
500
500
5,000
5,000
5,000
46.10
58.50
64.10
SW
SW
SW
SW
8- 10
10-12
14
14
12
14
16
22
—
—
—
—
22,000
15,000
12,000
5,000
41.60
54.00
59.60
206.70
10B
1012B
14B
1478B
TYPE II
Zinc Clad - Mechanical zinc on steel for superior
corrosion protection. Recommended for use with
RUSPRO® coated screws.
PHILLIPS MODIFIED TRUSS HEAD
Part No.
Part No.
* Available in Super Pak Jar (See Page 28)
Part No.
Screw
Size
Washer
Dia.
Pkg
Qty.
Case
Qty.
Price
/M
CW 10
CW 1012
CW 14
8-10
10-12
14
12
14
16
500
500
500
5,000
5,000
5,000
66.30
83.20
89.90
CW 10B
CW 1012B
CW 14B
8-10
10-12
14
12
14
16
—
—
—
22,000
15,000
12,000
61.80
78.70
85.40
TYPE III
Stainless Steel 18-8.
For use with stainless steel screws.
Part No.
Screw
Size
Washer
Dia.
Pkg
Qty.
Case
Qty.
Price
/M
SW 10SS
SW 1012SS
SW 14SS
8-10
10-12
14
12
14
16
500
500
500
5,000
5,000
5,000
103.40
133.80
160.70
SW 10BSS
SW 1012BSS
SW 14BSS
8-10
10-12
14
12
14
16
—
—
—
22,000
15,000
12,000
98.90
128.10
156.20
26
UCAN SUPER PAK
GREAT FOR TRADESMEN
BLUE PLASTIC PLUGS
1 Drill bit in each jar
Clear plastic Super Paks are the most convenient and
economical packaging for contractors and service people.
Super Pak jars measure just 3½" X 3½" X 6" high so they
fit easily on to service truck
racking and tool carrier trays.
A large 3¼ diameter screw on
lid gives easy access and prevents waste due to spilled
product.
A wide range of UCAN
anchors and metal drilling
screws are now available in
Super Paks.
Part No.
Size
UBP 68K
6-8 X 3/4
UBP 810K 8-10 X 7/8
UBP 1012K 10-12 X 1
Drill
Size
Jar
Qty.
Case
Qty.
3/16
3/16
1/4
1000
1000
500
12
12
12
Case
Wt.
Price
/ea.
9
8
9
32.10
34.90
27.00
BLUE PLASTIC PLUGS BULK PACK
Part No.
Size
Drill
Size
Case
Qty.
Case
Wt.
UBP
UBP
UBP
UBP
6-8 X 3/ 4
8-10 X 7/8
10-12 X 1
14-16 X 1-3/8
3/16
3/16
1/4
5/16
50,000
40,000
20,000
10,000
29
25
26
25
68B
810B
1012B
1416B
Price
/M
14.40
15.80
24.70
58.50
YELLOW PLASTIC PLUGS
1 Drill bit in each jar
6"
Part No.
Size
Drill
Size
Jar
Qty.
Case
Qty.
UYP 48K
UYP 812K
4-8 X 7/8
3/16
8-12 X 1-14 1/4
1000
400
12
12
Case
Wt.
Price
/ea.
10
10
47.20
29.80
YELLOW PLASTIC PLUGS BULK PACK
3-
1/2
"
3 - 1/2"
CB SCREWS
CBS 114K
CBS 158K
CBS 214K
CBT 114K
CBT 158K
Size
8
8
8
8
8
Size
Drill
Size
Case
Qty.
Case
Wt.
UYP 48B
UYP 812B
UYP 1216B
4-6-8 X 7/8
8-10-12 X 1-1/4
12-14-16 X 1-1/2
3/16
1/4
5/16
40,000
18,000
10,000
39
25
25
Price
/M
32.60
53.50
77.50
TWISTER ZAMAC DRYWALL ANCHOR
CBS
Part No.
Part No.
X
X
X
X
X
1-1/4
1-5/8
2-1/4
1-1/4
1-5/8
CBT
Jar
Qty.
Case
Qty.
Case
Wt.
Price
/ea.
500
500
250
500
500
6
6
6
6
6
18
23
16
19
23
50.00
58.50
41.10
56.20
60.70
Part No.
Jar
Qty.
Case
Qty.
Case
Wt.
Price
/ea.
JET 100K
150
6
14
59.00
TWISTER NYLON DRYWALL ANCHOR
ACOUSTIC EYE LAG SCREW
1 Installation tool (DLS 3) in each jar
TLS
Part No.
Size
TLS 142K
TLS 142KN
1/4 X 2
1/4 X 2
200
200
27
Jar
Qty.
Case
Qty.
Case
Wt.
Price
/ea.
JET NYLK
200
6
6
54.00
ZAMAC PIN BOLTS
TLS-BN
Jar
Qty.
Part No.
Case
Qty.
Case
Wt.
Price
/ea.
6
6
24
29
105.70
129.30
Part No.
Size
Jar
Qty.
Case
Qty.
Case
Wt.
Price
/ea.
ZAM 31678K
ZAM 141K
ZAM 14114K
3/16 X 7/8
1/4 X 1
1/4 X 1-1/4
350
200
150
6
6
6
26
24
15
89.40
85.40
69.20
www.ucanfast.com
UCAN SUPER PAK
LIGHT - MEDIUM APPLICATIONS
U-DRILLS® SUPER PAKS
SOCKET PAN HEAD
Zinc Plated
SELF DRILLING METAL SCREWS
WOOD TO METAL APPLICATIONS
SOCKET WAFER HEAD WITHOUT REAMER
Zinc Plated
Part No.
Size
TSW 1034K
TSW 101K
TSW 10114K
10-24 X 3/4
10-24 X 1
10-24 X 1-1/4
Point
Drilling
Capacity
Jar
Qty.
Case
Qty.
Case
Wt.
Price
/ea.
3
3
3
.175/7 ga
.175/7 ga
.175/7 ga
500
500
300
6
6
6
18
23
26
48.40
51.70
37.10
Part No.
Size
TSP
TSP
TSP
TSP
TSP
TSP
TSP
TSP
TSP
TSP
TSP
TSP
6-20 X 1/2
8-18 X 1/2
8-18 X 5/8
8-18 X 3/4
8-18 X 1
8-18 X 1-1/2
10-16 X 1/2
10-16 X 5/8
10-16 X 3/4
10-16 X 1
10-16 X 1-1/4
10-16 X 1-1/2
612K
812K
858K
834K
81K
8112K
1012K
1058K
1034K
101K
10114K
10112K
Point
Drilling
Capacity
Jar
Qty.
Case
Qty.
Case
Wt.
Price
/ea.
2
2
2
2
2
2
2
3
3
3
3
3
.090/13 ga
.100/12 ga
.100/12 ga
.100/12 ga
.100/12 ga
.100/12 ga
.110/12 ga
.175/7 ga
.175/7 ga
.175/7 ga
.175/7 ga
.175/7 ga
1000
1000
1000
1000
1000
500
1000
1000
500
500
500
400
6
6
6
6
6
6
6
6
6
6
6
6
13
20
23
26
32
22
25
31
18
22
25
24
33.20
37.10
43.30
47.80
54.00
37.10
52.30
55.10
30.40
38.30
43.90
41.60
Point
Drilling
Capacity
Jar
Qty.
Case
Qty.
Case
Wt.
Price
/ea.
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
.100/12 ga
.100/12 ga
.100/12 ga
.100/12 ga
.100/12 ga
.100/12 ga
.175/7 ga
.175/7 ga
.175/7 ga
.175/7 ga
.175/7 ga
.210/5 ga
.210/5 ga
.210/5 ga
.210/5 ga
.220/4 ga
.220/4 ga
.220/4 ga
.220/4 ga
1000
1000
1000
800
500
1000
1000
500
500
500
300
500
500
300
250
300
300
300
250
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
21
26
26
26
22
29
32
19
22
25
19
26
28
23
14
22
26
30
39
38.80
45.00
49.50
47.20
38.30
51.70
55.10
30.40
38.30
45.00
32.10
42.80
48.90
40.50
40.50
37.10
43.30
48.90
50.00
HEX WASHER HEAD
Zinc Plated
SOCKET WAFER HEAD REAMER SCREWS
Zinc Plated
TSW
TSW
TSW
TSW
10112RK
122RK
12212RK
123RK
10-24
12-24
12-24
12-24
X
X
X
X
1-1/2
2
2-1/2
3
3
4
4
4
.175/7 ga
.312/5/16"
.312/5/16"
.312/5/16"
300
200
150
100
6
6
6
6
19
24
23
24
56.20
50.00
50.00
37.10
Price
/ea.
HEAVY GAUGE APPLICATIONS
HEX WASHER HEAD
RUSPRO® Coated
Part No.
Size
TRH
TRH
TRH
TRH
12-24
12-24
12-24
12-24
1278K4
12114K5
12112K5
122K5
Point
X
X
X
X
7/8
1-1/4
1-1/2
2
4
5
5
5
Drilling
Capacity
Jar
Qty.
Case
Qty.
Case
Wt.
.312/
.500/
.500/
.500/
500
500
300
250
6
6
6
6
26
37
28
27
5/16"
1/2"
1/2"
1/2"
113.50
214.60
146.10
134.90
Part No.
Size
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
8-18 X 1/2
8-18 X 5/8
8-18 X 3/4
8-18 X 1
8-18 X 1-1/2
10-16 X 1/2
10-16 X 5/8
10-16 X 3/4
10-16 X 1
10-16 X 1-1/4
10-16 X 1-1/2
12-14 X 3/4
12-14 X 1
12-14 X 1-1/2
12-14 X 2
1/4-14 X 3/4
1/4-14 X 1
1/4-14 X 1-1/4
1/4-14 X 1-1/2
812K
858K
834K
81K
8112K
1012K
1058K
1034K
101K
10114K
10112K
1234K
121K
12112K
122K
1434K
141K
14114K
14112K
PHILLIPS MODIFIED TRUSS HEAD
Zinc Plated
STAINLESS STEEL
SOCKET PAN HEAD
410 Stainless Steel Hardened RUSPRO® Coated
Part No.
Size
Point
Drilling
Capacity
Jar
Qty.
Case
Qty.
Case
Wt.
TRP 812KSS
TRP 1034KSS
8-18 X 1/2
10-16 X 3/4
2
3
.100/12 ga
.175/7 ga
1,000
500
6
6
18
18
Price
/ea.
Part No.
Size
TPW 812K
8-18 X 1/2
Point
Drilling
Capacity
Jar
Qty.
Case
Qty.
Case
Wt.
Price
/ea.
2
.100/12 ga
1,000
6
28
43.30
Case
Wt.
Price
/ea.
SHARP POINT SCREWS
184.30
134.90
HEX WASHER HEAD
410 Stainless Steel Hardened
RUSPRO® Coated
Part No.
Head Style
Size
Jar
Qty.
Case
Qty.
STH 8916K
STP 8916K
IHWH
soc.pan
8 X 9/16
8 X 9/16
1,000
1,000
6
6
21
22
39.40
39.40
PHILLIPS MODIFIED TRUSS HEAD SHARP POINT
TRH
TRH
TRH
TRH
TRH
812KSS
1034KSS
121KSS
1434KSS
141KSS
8-18 X 1/2
10-16 X 3/4
12-14 X 1
1/4-14 X 3/4
1/4-14 X 1
2
3
3
3
3
.100/12 ga 1,000
.175/7 ga
500
.210/5 ga
500
.220/4 ga
300
.220/4 ga
300
6
6
6
6
6
18
19
30
23
26
185.40
136.00
219.10
138.30
154.00
Zinc Plated
SPW 8916K
8 X 9/16
1,000
6
23
38.30
28
For more information on anchor selection and design criteria, as well as the latest performance
data, please contact UCAN or visit our website at www.ucanfast.com
29
www.ucanfast.com
TECHNICAL DATA
FASTENER SELECTION GUIDELINES
UCAN Fastening Products' anchoring line ranges from light
duty plastic anchors to the most technically advanced types of
heavy load anchors. This wide variety of high quality fasteners
provides the user with the flexibility to select the anchor best
suited for the application. For this reason, prior to selecting the
type, size and quantity of fasteners required, the following
factors should be considered:
• Type and the condition of the base material
• Installation procedure
• Corrosion considerations
• The desired load transfer by the fastener
to the base material
• Dimensions of the base material
• Anchor spacing and edge distance
• Safety factor required
• Type of load(s) acting on the fastener
(eg: static, dynamic, seismic)
In all applications, the design engineer or architect responsible for the project should verify the load bearing capacity
and other performance criteria.
UCAN fasteners are designed to minimize the influence of
the installation technique on the anchor's holding power.
However, basic installation procedures listed for each
anchor in our technical and sales literature should be
followed, to ensure the integrity of the anchoring assembly.
• Correct hole geometry is important to guarantee
published load performance. The UCAN carbide drill bit,
•
manufactured to ISO (mm) and ANSI (in) standards, will produce holes which are optimal for metric or fractional
anchors. Incorrect hole geometry can cause reduced holding power, and installation difficulties.
Hole cleaning is an important and easy step to ensure
maximum anchor performance. For most expansion and
adhesive anchors, cleaning the hole with a nylon or wire
brush and blow out pump is all that is required. These steps
will remove concrete dust and debris from the hole which
could reduce the effectiveness of the anchor.
After placement of the anchor, turning the nut or hex
bolt tightens down the assembly. For engineered or critical
applications, specific torque should be applied using a calibrated torque wrench.
A safety factor must be used to compensate for variations
in loading, material strength and installation c o n d i t i o n s
and to ensure minimum anchor displacement. It is the
designer's responsibility to analyze all conditions and select
the appropriate safety factor.
For predominantly static loading in allowable stress design,
UCAN recommends the following safety factors:
•
•
•
•
For
For
For
For
•
mechanical and adhesive anchors
plastic anchors
PA system in concrete
PA system in steel
4:1
5:1
8:1
5:1
WEDGE ANCHOR LENGTH IDENTIFICATION SYSTEM
HEAD STAMP A
Anchor
Length
(inches)
From
Up to
but not
including
B
1-1/2 2
C
D
2-1/2 3
E
F
3-1/2 4
2
3
4
2-1/2
3-1/2
G
4-1/2
4-1/2 5
H
5
I
J
5-1/2 6
K
L
6-1/2 7
M
N
7-1/2 8
O
P
8-1/2 9
5-1/2
6
7
8
9
8-1/2
9-1/2 10
S
11
T
12
11
12
13
®
U-DRILLS
Magnetic Nut Setter
Square Recess Bit
Phillips Bit
#6
1/4
1
2
#8
1/4
2
2
# 10
5/16
2
2
# 12
5/16
3
3
# 14
3/8
3
3
SUPER SCRU-IT®
3/16
1/4
2
2
1/4
5/16
3
3
Note: For SHW 1478B use 5/16 Magnetic Nut Setter
7-1/2
R
10
U-DRILLS PERFORMANCE DATA
DRIVER SIZES FOR UCAN SCREWS
®
6-1/2
Q
9-1/2
STRENGTH CHARACTERISTICS
Screw
Size
Minimum
Breaking
Torque
(in/lbs)
Tensile
Strength
(lbs)
#6
30
1,102
652
#8
42
1,529
967
#10
65
2,181
1,439
Shear
Strength
(lbs)
#12
96
3,305
2,068
1/4-14
150
4,275
2,540
Recommended
Drilling
Speed
(rpm)
1,800 - 2,500
1,000 - 1,800
30
TECHNICAL DATA
Kesternich (DIN 50018 - 2.0L SO 2 ) Test
(Acidic Industrial Atmosphere)
DRILL POINT CAPACITY
Material Thickness(inch)
.500
.250
.312
0
Cadmium plated (0.003")
.110
.098
Electroplated Zinc
Point Type 1
#10 (.035 - .090)
#12 (.035 - .090)
1/4" (.035 - .090)
Mechanically plated zinc
Hot dip galvanized
Point Type 2
#6 (.035 - .090)
#8 (.035 - .100)
#10 (.090 - .110)
®
RUSPRO
0
1
2
5
10
20
Cycles to initial sign of red rust
Salt Spray Test ASTM B117
Point Type 3
#10 (.110 - .175)
#12 (.090 - .210)
1/4" (.110 - .220)
Electroplated Zinc
Point Type 4
#12 (.145 - .312)
Mechanically plated zinc
Point Type 5
#12 (.250 - .500)
1/4" (.250 - .500)
Hot dip galvanized
Cadmium plated (0.003")
RUSPRO
®
0 250 500 750 1000 2000
Hours to initial sign of red rust
(<10%)
Corrosion data shown on this page are based on independent laboratory
testing on the fasteners only. It is the user's responsibility to verify the
fastener's suitability to any particular corrosive application condition.
CORROSION RESISTANCE DATA
ZINC PLATING
• ASTM F 1941-00
• plating thickness: 0.0002'' - 0.0003''
RUSPRO®
The RUSPRO® multi layer coating provides outstanding
resistance against road salt, humidity, solvents and other
corrosive elements.
• Exceptional corrosion resistance
• Excellent acid (SO2) resistance
• Bonded multi layer coating to resist abrasion
Typical RUSPRO® coating composition:
4.0 microns (0.00016'') zinc plating
1.0 microns (0.00004'') phosphate
5.0 microns (0.0002'') ceramic top coat
PLEASE NOTE:
•
Items may not be exactly as depicted in this price list.
•
The technical data shown in this price list are correct at the
time of publishing.
•
For the most up to date information and MSDS please visit
our website at www.ucanfast.com.
Colour: silver / blue
Salt Spray Resistance (ASTM B117 - 03)
1,000 hours (5-10% red rust)
Kesternich Test DIN 50028 - (2.0 liter SO2)
15-20 cycles ( <10% red rust)
31
www.ucanfast.com
DISCLAIMER OF WARRANTIES AND LIABILITY
UCAN Fastening Products (UCAN) accepts no responsibility in case of any damage, loss, or injury, direct, indirect, incidental or consequential that results from the use of, or the inability to use, the text and technical data contained in the current or any subsequent editions
and/or versions of the price list, technical manual or any other UCAN publications. All recommendations or suggestions for use of UCAN
products are made without guarantee. Furthermore, UCAN accepts no responsibility for the performance of its products since the conditions of use are not under its control. Goods proved to be defective will be replaced, but UCAN accepts no responsibility beyond the cost
of the goods supplied. Furthermore, UCAN accepts no responsibility in case of damage that results from non-compliance with the manufacturer’s installation instructions, improper sizing of anchor fastening by customer, inadequate load bearing properties of anchoring base
material, improper applications, or any other factor not brought to the prior attention of UCAN.
Except as provided in this clause, UCAN accepts no liability with respect to delay in delivery or any injury, damage or loss resulting from
the use of its products.
Limitation of damages – UCAN will not be liable to DISTRIBUTOR for loss for future sales, loss of profits or goodwill, loss of use or incidental, indirect, consequential or special damages. UCAN’s liability under this agreement, including its indemnification obligations, will not
individually or in the aggregate exceed the amounts paid to UCAN by DISTRIBUTOR for the products giving rise to such liability.
EXCEPT FOR THE APPLICABLE LIMITED WARRANTY, UCAN MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED
(INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT)
CONCERNING ANY PRODUCT, AND ALL OTHER GUARANTEES, WARRANTIES, CONDITIONS AND REPRESENTATIONS, EITHER
EXPRESS OR IMPLIED, ARE EXCLUDED
UCAN Fastening Products is a division of
British Fastening Systems Limited.
32